Philips SBT310B/37 User Manual
Displayed below is the user manual for SBT310B/37 by Philips which is a product in the Portable Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
Always there to help you
SBT310/37
User manual
Question?
Contact
Philips
2
3
Contents
1 Important 4
Safety 4
Notice 5
2 Your Bluetooth Speaker 7
Introduction 7
What's in the box 7
Overview of the main unit 7
3 Get started 8
Connect power 8
Turn on 9
4 Play 9
Play from a Bluetooth device 9
Play from an external device 10
Control play 10
Adjust brightness 11
Set time 11
5 Product information 11
Specications 11
6 Troubleshooting 12
EN
4EN
1 Important
Safety
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:Toreducetheriskofreorelectric
shock, this apparatus should not be exposed to
rainormoistureandobjectslledwithliquids,
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
specied by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in bodily
5EN
injury, property damage, or damage to
the unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not
used for a long time.
• Batteries (battery pack or batteries
installed) shall not be exposed to
excessiveheatsuchassunshine,reor
the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid lled objects,
lighted candles).
q Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical
equipment.
Notice
Anychangesormodicationsmadetothis
device that are not expressly approved by
WOOX Innovations may void the user’s
authoritytooperatetheequipment.
Caution:Changesormodicationsmadeto
thisequipmentnotexpresslyapprovedby
Philips may void your authorization to operate
thisequipment.
FCC & RSS compliance statement:
This device complies with Industry Canada
licence-exempt RSS standard(s) and Part 15
of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
( French )
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence et la partie 15 des
Règles FCC. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillageradioélectriquesubi,mêmesile
brouillage est susceptible d'en compromettre le
fonctionnement.
RF Exposure info
ThisequipmentcomplieswithFCC’sandIC's
RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
( French )
Cet appareil est conforme aux limites
d’exposition au rayonnement RF stipulées par
la FCC et l’IC pour une utilisation dans un
environnement non contrôlé. Les antennes
utiliséespourcetémetteurdoiventêtre
installées et doivent fonctionner à au moins 20
cm de distance des utilisateurs et ne doivent
pasêtreplacéesprèsd’autresantennesou
émetteurs ou fonctionner avec ceux-ci. Les
installateursdoivents’assurerqu’unedistance
de 20 cm sépare l’appareil (à l’exception du
combiné) des utilisateurs.
FCC Section 15.105 statement:
NOTE:Thisequipmenthasbeentestedand
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
6EN
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipmentgenerates,usesandcanradiate
radiofrequencyenergyand,ifnotinstalled
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation.
Ifthisequipmentdoescauseharmful
interference to radio or television reception,
which can be determined by turning the
equipmentoffandon,theuserisencouraged
to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipmentandreceiver.
--Connecttheequipmentintoanoutletona
circuit different from that to which the receiver
is connected. -- Consult the dealer or an
experienced radio/TV technician for help.
ICES-003 complies statement
This Class B digital apparatus complies with
Canadian ICES-003.
( French )
CetappareilnumériquedelaclasseBest
conforme à la norme NMB-003 du Canada.
Disposal of your old product
Your product is designed and manufactured
withhighqualitymaterialsandcomponents,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
preventpotentiallynegativeconsequenceson
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negativeconsequencesontheenvironmentand
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
programs,les,broadcastsandsound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
Thisequipmentshouldnotbeusedforsuch
purposes.
Note
•The type plate is located on the bottom of the
apparatus.
7EN
2 Your Bluetooth
Speaker
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this speaker, you can enjoy audio from the
compatible Bluetooth device or other audio
devices.
What's in the box
Check and identify the contents of your
package:
• Main unit
• 1 x Adaptor
• Quick start guide
Overview of the main unit
a
• Switch the speaker between standby
mode and working mode.
b /
• Adjust volume.
• Adjust time.
c
• In automatic standby mode:press for 2
seconds to wake up your speaker.
• In standby mode: press for over 2
seconds to start time set.
• Press repeatly to select different levels
of display brightness when the AC
power cord is plugged in.
• Press for 8 seconds to erase all pairing
information.
d DC IN 5V 1A
• Power supply socket
e MP3-LINK
• Connect an audio device.
f Bluetooth indicator
• Steadily on when the speaker is
connected with Bluetooth compatible
device.
• Flashes when disconnected Bluetooth
pairing .
g Display screen
• Display time.
h Battery level indicator
• Flashes when the battery level is low
e
b
a
c
d
f
g
h
8EN
3 Get started
Caution
•Use of controls, adjustments, or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
This Bluetooth speaker can be powered by
either AC power or batteries.
Battery power
Warning
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Danger of explosion if battery is incorrectly replaced.
Replaceonlywiththesameorequivalenttype.
•The battery contains chemical substances, so it should
be disposed of properly.
•Keep children away from the battery.
1 Open the battery compartment.
2 Insert AA batteries with correct polarity
(+/-) as indicated.
3 Close the battery compartment.
AC power
Caution
•Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the speaker.
Connect the AC power adaptor to:
• the power supply socket on the back of
the speaker.
• the wall power outlet.
9EN
Turn on
• Slide on the speaker to the right.
» TheBluetoothindicatorashes(blue).
Switch to standby mode
The speaker switches to standby mode
automatically in the following situations.
• In Bluetooth mode: no audio signal from
your Bluetooth device over 15 minutes.
• In MP3 link mode: no audio signal
detected over 15 minutes.
• The battery level is low.
Note
•The Bluetooth connection will be terminated when the
speaker enters standby mode, you can wake up the
speaker by holding for 2 seconds.
You can also switch your speaker to standby
mode manual by sliding to the left.
4 Play
Play from a Bluetooth device
You can listen to a Buetooth device through this
speaker.
Note
•The effective operation range between the speaker
and your Bluetooth device is approximately 10 meters
(30 feet).
1 Slide to the right to turn on Bluetooth
function of the speaker.
» TheBluetoothindicatorashes.
2 Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3 Select "PHILIPS SBT310" on your device
for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator stays steadily on.
• For elder devices, you need to input
"0000" as pairing password.
4 Start music play on your Bluetooth device .
DoDo
PHILIPS SBT310
0000
PIN
10 EN
Play from a PC
You can also listen to audio through Bluetooth
in PC.
Note
•Make sure that you have installed Bluetooth driver in
your PC before pairing.
•The steps below are only for windows 7 operating
system. If you use other OS/IOS , refer to other OS/
IOS help.
1 Slide to the right to turn on Bluetooth
function of the speaker.
» TheBluetoothindicatorashes.
2 Activate the Bluetooth function in your PC.
3 Add a Bluetooth device in your PC and
select "PHILIPS SBT310" for pairing.
» The speaker gives out 2 beeps and the
Bluetooth indicator steadily on.
4 Set "PHILIPS SBT310" as default
communication device in your PC.
1). Right click the speaker icon ( ) in
the lower right corner of the Windows
home screen and select "Playback Devices"
from the option menu
2). Right click desired speaker and select
"Set as Default communnication Device".
5 Start music play on your PC .
Play from an external device
You can also listen to an external audio device
through this speaker.
Note
•Your speaker can play under MP3-LINK audio only
when the Bluetooth paused or stopped.
1 Connect the MP3-LINK cable to:
• the MP3-LINK jack (3.5mm) on the
back of the speaker.
• the headphone jack on an external
device.
2 Start to play on the device.
Control play
During play,
• press VOL +/- to increase or decrease the
volume level.
11EN
Adjust brightness
Note
•You can adjust display brightness only when the AC
power cord is plugged in.
Press repeatedly to select different levels of
display brightness.
Set time
Note
•You can set time only when the speaker is in standby
mode.
1 Slide the left.
2 Hold on the speaker for more than two seconds.
» [12] begins to blink.
3 Press toconrm.
» The hour digits begin to blink.
4 Press / to set hour.
5 Repeat steps 3-4 to set minute.
There is a spot on the lower right corner of the screen.
• The spot lights off when the time set
before 12:00 at noon.
• The spot lights on when the time set after
12:00 at noon.
5 Product
information
Note
•Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 x 2 W RMS
Signal to Noise Ratio >67 dB
Aux-in Link 600 mV RMS 20
kohm
Bluetooth
Bluetooth version V2.1+ EDR
Frequencyband 2.402-2.480 GHzISM Band
Rang 10m (free space)
General information
AC power (power
adaptor)
Model:
ASUC12A-050100
Input: 100-240V~,
50/60Hz, 0.3A;
Output: 5V 1A;
Operation Power
Consumption
3W
Standby Power
Consumption
<1W
Dimensions - Main Unit
(W x H x D)
300 x 116 x
156mm
Weight- Main Unit 1.2 kg
12 EN
6 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requestingservice.Iftheproblemremains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•Make sure that the AC power plug of the
speaker is connected properly.
•Make sure that there is power at the AC
outlet.
•Make sure that the batteries are inserted
correctly.
No sound
•Adjust the volume.
No response from the speaker
•Restart the speaker.
13EN
Specifications are subject to change without notice
2014 © WOOX Innovations Limited.
All rights reserved.
This product was brought to the market by WOOX
Innovations Limited or one of its affiliates, further referred
to in this document as WOOX Innovations, and is the
manufacturer of the product. P&F is the warrantor in relation
to the product with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V.
SBT310_37_UM_V2.0