Philips Soundbar speaker User Manual
Displayed below is the user manual for Soundbar speaker by Philips which is a product in the Soundbar Speakers category. This manual has pages.
Related Manuals
User manual
Soundbar Speaker
7000 Series
TAB7305
：
Help and support
Important Safety instructions
Care for your product
Care of the environment
Compliance
What’s in the Box
Placement
Connect audio from TV and other
devices
Connect to HDMI (ARC) Socket
Connect to Optical Socket
Connect to AUX Socket
Connect to Power
Pair up with the subwoofer
Automatic pairing
Manual pairing
2
2
2
3
4
3
6
6
6
7
9
9
10
10
10
10
11
11
11
12
12
12
12
13
13
14
15
16
5
Main unit
Wireless subwoofer
Connectors
Remote control
Prepare the remote control
Turn ON and OFF
Select Modes
Select Equalizer (EQ) Effect
Adjust the Volume
Bluetooth Operation
USB Operation
7
8
11
14
This product complies with the radio
interference requirements of the European
Community.
Hereby,TP Vision Europe B.V. declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.You can find the
Declaration of Conformity on
www.p4c.philips.com
POWER
Switch the Soundbar on or off.
SOURCE
Selects an input source for the Soundbar.
VOL +/-
Increase/Decrease the volume.
LED indicators
4
4
Wireless subwoofer
This section includes an overview of the
wireless subwoofer.
AC~Socket
Connect to the power supply.
Pair Button
Press to enter the pairing mode for the
subwoofer.
Subwoofer Indicator
When the power is turned on,the
indicator lights up.
During wireless pairing between
the subwoofer and the main unit,
the LED indicator blinks amber slowly.
When the pairing succeeds,the
indicator grows solid.
When the pairing fails,the indicator
blinks amber quickly.
When the main unit shut down or
enter standby mode,the LED
indicator is off.
HDMI
ARC AUX BT
EQ
USB
OPTICAL
Pair
1 2
9
35
4
6
7
8
10
11 12
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
USB
Audio input from a USB storage device .
HDMI OUT (ARC)
Connect to the HDMI input on the TV .
OPTICAL
Connect to an optical audio output on the
TV or a digital device .
AUX
Audio input from external device such
as TV, MP3 player, mobile phone, tablet,
etc .
AC~Socket
Connect to the power supply .
other products which generate infra-red
remote control operation maybe
using infra-red rays are used near the unit,
it may operate incorrectly. Conversely, the
First-time use :
The unit has a pre-installed lithium battery.
Remove the protective tab to activate the
remote control battery.
impossible if there are any obstacles
rays, or if other remote control devices
other products may operate incorrectly.
within the effective range 19.7 feet (6m),
between the unit and the remote control.
• If the Remote Control is operated near
• The provided Remote Control allows the
unit to be operated from a distance.
• Even if the Remote Control is operated
Prepare the Remote control
Replace the Remote Control Battery
The remote control requires a 3V CR2025
(+/-).
3 Use the tools to catch the groove of the
battery compartment cover and turn
to catch the groove of the battery box
Lithium battery.
cover and turn counter-clockwise to
and pay attention to the correct polarity
clockwise to (lock), secure it into the
remote control.
in the lid, place the new Cr2025 battery
1 Use tools (such as coin batteries/coins)
(unlock).
2 Remove the old battery, which is located
1 (POWER)
Switch the Soundbar on or off.
2 (MUTE)
Mute or restore volume.
3 HDMI ARC
Switch your source to HDMI ARC
connection.
4 AUX
Switch your audio source to the AUX
connection (3.5mm jack).
5 Pair/BT
Switch to Bluetooth mode. Press and
hold to activate the pairing function in
Bluetooth mode or disconnect the
existing paired Bluetooth device.
6 OPTICAL
Switch your audio source to the optical
connection.
7 USB
Switch to USB mode.
8 EQ
Select Equalizer (EQ) effect.
9 (PLAY/PAUSE)
Start, pause or resume play in BT/USB
mode.
10 (PREVIOUS/NEXT)
Skip to the previous or next track in
BT/USB mode.
11 VOL +/- (Soundbar’s Volume)
Increase or decrease volume.
12 +/- (Subwoofer’s Volume)
Increase or decrease the subwoofer's
volume.
confirmed to be a rechargeable type.
the batteries with new ones.
• Do not use any batteries other than those
Control to prevent it from leaking.
• If the batteries leak, wipe away the leakage
inside the battery compartment and replace
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
• Never recharge a battery unless it is
specified.
• Do not heat or disassemble batteries.
• Never throw them in fire or water.
• Do not carry or store batteries with other
Precautions Concerning Battery
• When the Remote Control is not to be used
for a long time (more than a month),
remove the battery from the Remote
21 3
9
Place the subwoofer at least 1 meter (3 feet)
away from your Soundbar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
HDMI OUT(ARC)
HDMI(ARC)
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
Some 4K HDR TVs require the HDMI input or
picture settings to be set for HDR content
reception. For further setup details on HDR
display, please refer to the instruction manual of
your TV.
Your Soundbar supports HDMI with Audio
connector on your Soundbar to the HDMI
ARC connector on the TV. The HDMI ARC
For details, see the TV user manual.
manual.
2. On your TV, turn on HDMI-CEC operations.
1. Using a High Speed HDMI cable (not
differently. For details, see the TV user
connector on the TV might be labeled
included), connect the HDMI OUT (ARC)
Connect to Optical Socket
the OPTICAL OUT connector on the TV or other
devices.
• The digital optical connector might be
socket to the AUX socket on the unit.
Using an optical cable(not included), connect
• Use a 3.5mm to 3.5mm audio cable
Connect to AUX Socket
the OPTICAL connector on your Soundbar to
labeled SPDIF or SPDIF OUT.
(not included) to connect the TV’s headphone
Connect to HDMI (ARC) Socket
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
AU X
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
3. Only HDMI 1.4 compatible cables can support the ARC
1. Your TV must support the HDMI-CEC and ARC function.
HDMI-CEC and ARC must be set to On.
2. The setting method of HDMI-CEC and ARC may differ
please refer to your TV owner‘s manual.
depending on the TV. For details about ARC function,
function.
included) to connect the TV’s audio output
sockets to the AUX socket on the unit.
• Use a RCA to 3.5mm audio cable (not
• Use a 3.5mm to 3.5mm audio cable (not
included) to connect external devices such as
a MP3 player,mobile phone or tablet, etc.
pair.
The subwoofer and Soundbar will automatically
remote control to switch the unit to On mode.
Do not press Pair on the rear of the
subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
mains sockets and then press on the unit or
Plug the Soundbar and the subwoofer into the
• Before connecting the AC power cord,
Connect to Power
connections.
underside of the unit.
• Connect the mains cable to the AC~
voltage printed on the back or the
• Power cord quantity and plug type vary by
socket.
power supply voltage corresponds to the
regions.
• Connect the mains cable to the AC~Socket
of the subwoofer and then into a mains
Socket of the unit and then into a mains
ensure you have completed all other
socket.
• Risk of product damage! Ensure that the
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
AU X
still keeps blinking, repeat step 1.
in an open area (the closer the better).
• Remove any objects between the subwoofer and the
conflict or strong interference (e. g. interference from
Soundbar.
3. If manual pairing failed and the Pair indicator
• The subwoofer should be within 6 m of the Soundbar
• If the wireless connection fails again, check if there is a
procedures.
conflicts or strong interferences and repeat the above
an electronic device) around the location.Remove these
1. Press and hold the & (Source & Vol-)on
The AUX/USB indicator on the Soundbar
slowly. The subwoofer will be paired
2. The AUX/USB Indicator goes off,the pairing
when successful.
and hold Pair on the subwoofer.
the Soundbar simultaneously, and then press
and the Pair indicator on subwoofer will blink
successfully in about 2 seconds.
LED indicator of subwoofer grows constant
Tips
Tips
Pair up with the subwoofer
Automatic Pairing
Turn ON and OFF
• When you first connect the unit to the
red.
main socket, the unit will be in STANDBY
mode. The STANDBY indicator will light up
• Switch the Soundbar to the correct source
for other devices.
socket if you want to switch the unit off
The unit automatically turns to Standby mode
or press any Source button once on the
the remote control to switch the main unit
completely.
ON or OFF.
Auto Standby
• Press (SOURCE) button once on the unit
the mains plug from the mains socket.
• Press the ) button on the unit or (POWER
• Disconnect the main plug from the main
after about 15 minutes if the TV or the external
unit is disconnected, switched off.
• To switch the unit off completely, remove
remote control also can wake up the main unit.
Before you start
manual.
in the quick start guide and the user
• Make the necessary connections described
This section helps you use the Soundbar to
play audio from connected devices.
4 Use your Soundbar
• News -for listening to news
select your desired preset equalizer effects:
Press the EQ button on the remote control to
• Movie -for viewing movies
• Music -for listening to music
Select predefined sound modes to suit your video
or music.
Movie/Music/News
LEDs blink for 3 sec to show current EQ mode
according to the EQ mode definition.
Select Equalizer (EQ) Effect
which mode is currently in use.
• Please turn the unit off completely to save
energy when not in use.
Select Modes
1. Press the (Source) button repeatedly on the
remote control to select the AUX, OPTICAL,
HDMI ARC, BT, USB mode.
2. The indicator light on the Soundbar will show
unit or press corresponding button on the
Standby ON
System state Standby On
Indicator Activity
Input Source
System state AUX USB BT OPTICAL HDMI ARC
Indicator
Activity
Equalizer (EQ)
System state Movie Music News
Indicator Activity
perform any operations.
Press the +/- button to adjust the subwoofer
volume.
Press to increase or Vol+/Vol-(Volume)
laptop), and then you can listen to the audio files
stored on the device through your Soundbar
speakers.
Adjust the Volume
• To mute sound, press Mute.
decrease a volume level.
• To restore the sound,press any buttons or
Adjust the Subwoofer’s Volume
Bluetooth Operation
Through Bluetooth, connect the Soundbar
with your Bluetooth device (such as an iPad,
iPhone, iPod touch, Android phone, or
Indicator
Activity
Soundbar’s Volume
Min Max
Subwoofer’s Volume
Indicator
Activity
Min Max
• A Bluetooth device which supports
What you need
Bluetooth profile A2DP, AVRCP and with
(30 feet).
1.Press the button repeatedly
on the unit or press the Pair/BT button
• The maximum operational range
between the Soundbar and a Bluetooth
device is approximately 10 meters
Bluetooth version as 4.2 + EDR.
Bluetooth Status
System state Enter BT Mode Pairing Paired
Indicator Activity
13
and the Soundbar re-enters pairing mode.
Bluetooth, search for and select
on the remote control to switch the
remote control to enter pairing mode.
how to enable Bluetooth).
press and hold the Pair/BT button on the
The Soundbar’s indicator blinks white.
3.On the Bluetooth device, switch on
2.Press and hold the button on the unit or
Press and hold & (source & vol+),
the user manual of the Bluetooth device on
the previous paired devices will be cleared
Soundbar to Bluetooth mode.
The Soundbar’s indicator blinks white.
Philips TAB7305 to start connection (see
+
6.If you want to connect to another device,
device and enter pairing mode.
or the Pair/BT button on the remote control
4.Wait until the Soundbar‘s indicator
becomes solid white.
5.To exit Bluetooth, switch the unit to another
source. When your switch back to Bluetooth
mode, Bluetooth connection remains active.
press and hold the button on the soundbar
to disconnect the current connected Bluetooth
When the unit is powered on, press and hold the
VOL + &VOL - , the unit's all source LEDs lights up
5 seconds and reset the unit to factory default
settings.
Factory default settings
Depending on the type of wall mounting
your Soundbar, make sure that you use
screws of a suitable length and diameter.
Screw length/diameter
(3) Hang the Soundbar on the fastening screws.
(1) Drill two holes on the wall.
(2) Secure the dowels and screws in the holes.
> mm/1.35 38"
1.5-2.5mm/0.06 -0.1" "
4mm/
0.16"
14
USB Operation
You can play music files stored on a connected
USB device.For playable types of files,see
”supported audio formats “page 15.
Caution:USB Socket cannot charge to devices.
HDMI OUT
(ARC)
USB OPTICAL IN AUX IN AC IN
USB
Amplifier
• Total output power:
• Total Harmonic Distortion:<1%
• Bluetooth profile:A2DP,AVRCP
• Signal-to-noise ratio:
• Frequency band/Output power:
300W, <10%THD
45Hz~20KHz / -10dB
• Frequency Response:
>95dB(CCIR) / (A-weighted)
Bluetooth /Wireless
• Bluetooth version:4.2+EDR
2402MHZ ~ 2480 MHZ /6±2dBm
800 x 95 x 64.7 mm
• Weight:7.57kg
• Operating temperature:0°C - 40°C
• Speakers Impedance:6Ωx 2 +6Ωx 2
• Dimension (W x D x H ):
• Weight:2.27KG
Subwoofer
• Power Supply:100-240V~ 50/60Hz
• Speakers Impedance:2Ω
• Dimension (W x D x H ):
• Power Supply:100-240V~ 50/60Hz
190 x 280 x 380 mm
Main unit
The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit will
mute. This is NOT a defect. Ensure that the audio setting
of the input source (e.g. TV, game console, DVD player,
etc.) is set to PCM, Dolby Digital or Dolby Digital Plus
(Refer to the user manual of the input source device for
its audio setting details) with OPTICAL / HDMI input.
Power Consumption
• Power Consumption for Soundbar:84W
• Power Consumption for
Subwoofer:117W
• Standby Power Consumption:<2W
Remote control
• Distance/Angle:6m/30°
• Battery Type:CR2025
Supported Audio Format
HDMI ARC
• Dolby Digital,Dolby Digital Plus,LPCM
2ch
OPTICAL
• Dolby Digital, LPCM 2ch
BLUETOOTH
• SBC
USB
• MP3, WMA, WAV, OGG, FLAC
15
16
®
Manufactured under license from Dolby Laboratories. Dolby,Dolby Audio, and the double-D symbol are trademarks of Dolby
The Adopted Trademarks HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.in the United States and ohter countries.
Laboratories.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks
by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
Specifications are subject to change without notice. Please visit http://www.philips.com/support for the latest updates and documents.
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been
manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited. or one of its affiliates, and MMD Hong Kong
Holding Limited. is the warrantor in relation to this product.