Table of Contents
- Before Using the Product
- Preparations
- Connecting and Using a Source Device
- Using MDC
- Home feature
- Screen Adjustment
- OnScreen Display
- System
- Support
- Troubleshooting Guide
- Specifications
- Appendix
Samsung LH85OHFPLBC/ZA User Manual
Displayed below is the user manual for LH85OHFPLBC/ZA by Samsung which is a product in the Signage Displays category. This manual has pages.
Related Manuals
User Manual
The color and the appearance may differ depending on the product, and
performance.
OH85F
Table of contents
Before Using the Product
Copyright 5
Safety Precautions 6
Cleaning 6
Storage 7
Electricity and Safety 7
Installation 8
Operation 10
Preparations
Checking the Components 13
Components 13
Parts 14
Front 14
Remote Control 16
Before Installing the Product (Installation
Guide) 18
Ventilation 18
Wall Mount Specifications 19
Remote Control (RS232C) 20
Connecting and Using
Before Connecting 33
Pre-connection Checkpoints 33
Connecting to a PC 36
Connecting to a Video Device 37
Connecting the HDBase-T 38
Connecting to an Audio System 39
Changing the Input source 40
Source 40
Using MDC
MDC Program Installation/Uninstallation 41
Installation 41
Uninstallation 41
Connecting to MDC 42
Home feature
Multi Screen 44
Picture Mode 45
On/Off Timer 46
On Timer 46
Off Timer 46
Holiday Management 47
Network Settings 48
ID Settings 49
D ID 49
PC Connection C 49
Video Wall 50
Video Wall 50
More settings 52
Picture Mode 53
Backlight / Brightness / Contrast / Sharpness /
Color / Tint (G/R) 54
Color Temperature 55
White Balance 55
Gamma 56
Calibrated Value 56
Table of contents
Picture Options 57
Color Tone 58
Digital NR 58
HDMI Black L 58
Film Mode 59
Smart LED 59
Picture Size 60
Picture Size 60
Zoom/Position 61
Picture Off 62
Reset Picture 62
OnScreen Display
Multi Screen 63
Multi Screen 63
Display Orientation 68
Onscreen Menu Orientation 68
Source Content Orientation 68
Aspect Ratio 68
Screen Protection 69
Pixel Shift 69
Timer 70
Immediate Display 71
Side Gray 71
Message Display 71
Source Info 71
No Signal Message 71
MDC Message 71
Menu Language 72
Reset OnScreen Display 72
System
Setup 73
System) 73
Time 74
Clock Set 74
DST 74
Sleep Timer 74
P On Delay 74
Auto Source Switching 75
Auto Source S 75
Primary Source R 75
Primary Source 75
Secondary Source 75
Power Control 76
Auto P On 76
S Control 76
N S 77
P Button 77
Eco Solution 78
Brightness Limit 78
Energy S 78
Eco Sensor 78
Screen Lamp Schedule 79
No Signal P Off 79
Auto P Off 79
Fan & Temperature 80
Fan Control 80
Fan Speed Setting 80
Outdoor Mode 80
Temperature Control 80
Change PIN 81
General 82
Security
HDMI Hot Plug
Reset System 83
Support
Software Update 84
Contact Samsung 84
Go to Home 84
Reset All 84
3
Table of contents
Requirements Before Contacting Samsung
Customer Service Center 85
Testing the Product 85
Checking the Resolution and Frequency 85
Q & A 92
Specifications
General 94
Preset Timing Modes 96
Appendix
Responsibility for the Pay Service (Cost to
Customers) 99
Not a product defect 99
Others 99
Optimum Picture Quality and Afterimage Burn-
in Prevention 100
Optimum Picture Quality 100
License 102
Terminology 103
4
5
Before Using the Product
Copyright
©
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
–
–
out.
Chapter 01
6
Safety Precautions
Warning
Caution
Cleaning
1
2
!
3
product.
4
the exterior of the product.
5
finished.
6
7
Storage
Electricity and Safety
Warning
An electric shock or fire may result.
shock may result.
!
An unsecure connection may cause a fire.
!
Damage to the cord may result in a fire or electric shock.
A fire or electric shock may result.
!
A fire may result.
8
Caution
!
A fire or electric shock may result.
!
!
socket.
An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON
TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT
SOURCES.
A fire may result.
!
An increased internal temperature may cause a fire.
!
An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
Children may suffocate.
9
the product or cause a fire.
!
A fire or electric shock may result.
surface.
not install the product in a kitchen or near a kitchen counter.
Precautions during installation and storage
34)
Caution
!
!
SAMSUNG
!
continuously for an extended period of time) may seriously affect its
performance.
to install the product at such a place.
10
Operation
Warning
or modify the product yourself.
A fire or electric shock may result.
!
Damage to the cord may result in a fire or electric shock.
!
An electric shock or fire may result.
If the product is dropped or the outer case is damaged, turn off the
Continued use can result in a fire or electric shock.
etc.) on top of the product.
!
A fire or electric shock may result.
!
A fire or electric shock may result.
Product failure, an electric shock or fire may result from a
!GAS
Sparks can cause an explosion or fire.
Product failure, an electric shock or fire may result from a
11
!
near the product.
An explosion or fire may result.
An increased internal temperature may cause a fire.
100
Product failure, an electric shock or fire may result.
Product failure, an electric shock or fire may result.
Caution
!
-_-
!
shock or electric leakage.
!
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
A fire or electric shock may result.
!
use.
!
Store small accessories out of the reach of children.
!
high.
location that children or infants cannot reach.
doctor immediately.
!
liquid.
!
recycling.
13
–
purchased the product if any
components are missing.
– The appearance of the components
–
product. To install a stand, you can
purchase one separately.
Checking the Components
Components
Quick setup guide Warranty card
Regulatory guide Batteries
Remote Control
Preparations
Chapter 02
14
Parts
Front
Port Description
Remote sensor
15
Reverse Side
SERVICE
RS232C INHDBT
(LAN IN) HDMI IN 2 HDMI IN 1 DP IN 1
(UHD 60Hz)
DP IN 2
(UHD 60Hz) AUDIO
OUT
Port Description
SERVICE
HDBT (LAN IN)
-
transmitter.
-
HDMI IN 1, HDMI IN 2
DP IN 1 (UHD 60Hz), DP IN 2 (UHD
60Hz)
AUDIO OUT
RS232C IN
16
HOME
MENU
POWER
OFF
VOL
CH
MagicInfo
Player I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
DEL-/--
SOURCE
CH LIST
Mute the sound.
Unmuting the sound: Press MUTE again or
Go to Home Launch Button.
Display or hide the onscreen display menu, or
Change the input source.
Use this hotkey to directly access MagicInfo.
is connected.
–
may differ for different products.
Remote Control
17
TOOLS INFO
SET
UNSET
LOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
source.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source
from HDMI1, HDMI2, DisplayPort1,
DisplayPort2 or HDBT.
Quickly select frequently used functions.
It sets safe lock function.
If multiple products are connected through the
Video Wall feature, press the SET
Control the product using the remote control.
SET
using the remote control.
–
may differ for different products.
To place batteries in the remote control
18
Before Installing the Product
(Installation Guide)
instructions.
Switching between portrait and landscape
A
B
Figure 1.1 Side view
Ventilation
Installation on a Perpendicular Wall
A Minimum 60 mm
B C
C.
19
Wall Mount Specications
E
F
G
BOLT SIZE M8
Remote Control (RS232C)
Cable Connection
RS232C Cable
Interface
Pin
Bit rate
Data bits
Parity
None
Stop bit
Flow control
None
Maximum length
Pin assignment
1 2 3 4 5
6 7 8 9
5 4 3 2 1
9 8 7 6
<Male type> <Female type>
Pin Signal
1
Detect data carrier
2
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
5
16
9
-P2-
1
2
3
-P1-
-P1- -P1- -P2- -P2-
Male type Rx
Tx
Gnd
3
2
5
----------
----------
----------
2
1
3
Tx
Rx
Gnd
STEREO
PLUG
(3.5ø)
LAN Cable
Pin assignment
12345678
Pin No Standard Color Signal
1 White and orange
Orange TX-
3 White and green
4 Blue NC
5 NC
6 Green RX-
7 NC
8 NC
Direct LAN cable (PC to HUB)
HDBT
(LAN IN) RJ45 MDC
HUB
P1
P1P2
P2
Signal P1 Signal
1 <--------> 1
TX- <--------> TX-
3 <--------> 3
RX- 6 <--------> 6 RX-
Cross LAN cable (PC to PC)
HDBT
(LAN IN) P1 P2
Signal P1 Signal
1 <--------> 3
TX- <--------> 6 RX-
3 <--------> 1
RX- 6 <--------> TX-
Connection
Connection 1
RS232C IN
HDBT
(LAN IN)
HDBT
(LAN IN)
Control Codes
Viewing control state (Get control command)
Header Command ID Data length Checksum
0xAA Command
type
0
Controlling (Set control command)
Header Command ID Data length Data Checksum
0xAA Command
type
1 Value
Command
No. Command type Command Value range
1
0x11 0~1
2
Volume control 0~100
3
Input source control 0x14 -
4
Screen mode control 0x18 -
5
Screen size control 0x19
6
PIP on/off control 0x3C 0~1
7
BNC only)
0x3D 0
8
0x5C 0~1
No. Command type Command Value range
9
Safety Lock 0x5D 0~1
10
Video Wall On 0x84 0~1
11
Video Wall User Control 0x89 -
Header Command ID Data length Data 1 Checksum
0xAA 0x11 1
Header Command ID Data length Data 1
0xAA 0x11 1 1
Power control
Function
Header Command ID Data length Checksum
0xAA 0x11 0
Header Command ID Data length Data Checksum
0xAA 0x11 1
Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x11
Nak
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x11 "ERR"
Volume control
Function
Header Command ID Data length Checksum
0xAA 0
Header Command ID Data length Data Checksum
0xAA 1 "Volume"
Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 "Volume"
Nak
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 "ERR"
Input source control
Function
Header Command ID Data length Checksum
0xAA 0x14 0
Header Command ID Data length Data Checksum
0xAA 0x14 1 "Input Source"
0x14 PC
0x18 DVI
0x0C Input source
0x08 Component
MagicInfo
0x1F
0x30
0x40 DTV
HDMI1
HDMI1_PC
DisplayPort
0x55 HDBT
respond to "Get" commands.
MagicInfoMagicInfo function.
Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x14 "Input
Source"
Nak
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x14 "ERR"
Screen mode control
Function
Video Wall
Header Command ID Data length Checksum
0xAA 0x18 0
Header Command ID Data
length
Data Checksum
0xAA 0x18 1 "Screen
Mode"
"Screen Mode": A code that sets the product status
0x01 16 : 9
0x04 Zoom
0x31 Wide Zoom
0x0B 4 : 3
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x18 "Screen
Mode"
"Screen Mode": A code that sets the product status
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x18 "ERR"
Screen size control
Function
Header Command ID Data length Checksum
0xAA 0x19 0
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x19 "Screen
Size"
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x19 "ERR"
PIP On/Off control
Function
Video Wall is set to On.
MagicInfo.
Header Command ID Data length Checksum
0xAA 0x3C 0
Header Command ID Data length Data Checksum
0xAA 0x3C 1 "PIP"
"PIP": A code used to turn the PIP mode of a product on or off
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x3C "PIP"
"PIP": A code used to turn the PIP mode of a product on or off
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x3C "PIP"
Auto adjustment control (PC and BNC only)
Function
None
Header Command ID Data length Data Checksum
0xAA 0x3D 1 "Auto
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x3D "Auto
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x3D "ERR"
Video Wall Mode Control
Function
Video Wall
Video Wall
Header Command ID Data length Checksum
0xAA 0x5C 0
Header Command ID Data length Data Checksum
0xAA 0x5C 1 "Video Wall Mode"
Full
Natural
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x5C "Video Wall
Mode"
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x5C "ERR"
Safety Lock
Function
Safety Lock function on or off on a product.
Header Command ID Data length Checksum
0xAA 0x5D 0
Header Command ID Data length Data Checksum
0xAA 0x5D 1 "Safety
Lock"
Ack
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x5D "Safety Lock"
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x5D "ERR"
30
Video Wall On
Function
Turn Video Wall on or off on the product from your computer.
Get Video Wall On/Off Status
Header Command ID Data length Checksum
0xAA 0x84 0
Set Video Wall On/Off
Header Command ID Data length Data Checksum
0xAA 0x84 1 V.Wall_On
Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x84 V.Wall_On
Nak
Header Command ID Data
length
Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x84 ERR
Video Wall User Control
Function
Turn the Video Wall function on or off on the product from your computer.
Get Video Wall Status
Header Command ID Data length Checksum
0xAA 0x89 0
Set Video Wall
Header Command ID Data
length
Val1 Checksum
0xAA 0x89 Wall_SNo
31
10x10 Video Wall Model
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Off
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
1
0x11 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F
2
3
0x31 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F
4
0x41 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0x4B 0x4C 0x4D 0x4E 0x4F
5
0x51 0x53 0x54 0x55 0x56 0x57 0x58 0x59 0x5A 0x5B 0x5C 0x5D 0x5E 0x5F
6
0x61 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F
7
0x71 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E N/A
8
0x81 0x83 0x84 0x85 0x86 0x87 0x88 0x89 0x8A 0x8B 0x8C N/A N/A N/A
9
0x91 0x93 0x94 0x95 0x96 0x97 0x98 0x99 0x9A 0x9B N/A N/A N/A N/A
10
0xA1 0xA3 0xA4 0xA5 0xA6 0xA7 0xA8 0xA9 0xAA N/A N/A N/A N/A N/A
11
0xB1 0xB3 0xB4 0xB5 0xB6 0xB7 0xB8 0xB9 N/A N/A N/A N/A N/A N/A
12
0xC1 0xC3 0xC4 0xC5 0xC6 0xC7 0xC8 N/A N/A N/A N/A N/A N/A N/A
13
0xD1 0xD3 0xD4 0xD5 0xD6 0xD7 N/A N/A N/A N/A N/A N/A N/A N/A
14
0xE1 0xE3 0xE4 0xE5 0xE6 0xE7 N/A N/A N/A N/A N/A N/A N/A N/A
15
0xF1 0xF3 0xF4 0xF5 0xF6 N/A N/A N/A N/A N/A N/A N/A N/A N/A
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1 0x01
... ...
99 0x63
100 0x64
Ack
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 4 0x89 Wall_
SNo
Nak
Header Command ID Data length Ack/Nak r-CMD Val1 Checksum
0xAA 0xFF 3 0x89 ERR
33
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
Chapter 03
34
Before connecting cables
2
Silicone-Bar
thickness for each:
3
the marked area to ensure it is not lost.
4
5
6
35
Power cable connection guide
1
2
other. Solder and insulate the connected
part.
3
4
Different power cable colors by country
Model Name Neutral Live Ground Country
OH85F BLUE BROWN GREEN/YELLOW
WHITE BLACK GREEN or GREEN/YELLOW America
BLUE BROWN GREEN/YELLOW Europe
BLACK RED GREEN/YELLOW India
WHITE BLACK GREEN or GREEN/YELLOW
36
Connecting to a PC
Connecting parts may differ in different products.
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
Connection Using an HDMI-DVI Cable
HDMI IN 1, HDMI IN 2
Connection Using an DP Cable
DP IN 1 (UHD 60Hz),
DP IN 2 (UHD 60Hz)
Precautions for using DP
The interface DP IN 1 (UHD 60Hz), DP IN 2 (UHD 60Hz)
compliant may cause the product to function improperly. Samsung Electronics shall not
DisplayPort1
or DisplayPort2
DisplayPort1 or DisplayPort2 may
37
Connecting to a Video Device
Connecting parts may differ in different products.
Press the SOURCE
Connection Using an HDMI-DVI Cable
The appearance may differ depending on the product.
Connecting parts may differ in different products.
HDMI IN 1, HDMI IN 2
Connection Using an HDMI Cable
The appearance may differ depending on the product.
Connecting parts may differ in different products.
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
–
if out of date, request an upgrade.
connection error may occur.
HDMI IN 1, HDMI IN 2
38
Connecting the HDBase-T
The appearance may differ depending on the product.
Connecting parts may differ in different products.
HDMI IN
HDBT
(LAN IN) LAN
HDBase-T (Tx)
HDMI OUT
HDMI OUT
HDMI OUT
39
Connecting to an Audio System
Connecting parts may differ in different products.
AUDIO OUT
40
Changing the Input source
Source
SOURCESource
. . . . . . . . . . . . . . . . . . . .
Source
HDMI1
DisplayPort1
– The displayed image may differ depending on the model.
Source
the screen of the selected source.
SOURCE
to.
Edit Name
SOURCESourceTOOLSEdit NameENTER E
Source
source.
VCR / DVD / Cable STB / Satellite STB / HD STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo
/ DHR / PC / DVI PC / DVI Devices
HDBT
41
Using MDC
After you press the OnOff
a minute. To run a command, try it after a minute.
MDC Program Installation/Uninstallation
Installation
conditions.
1
Click the MDC Unified installation program.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click
"Next".
4
In the "License AgreementI accept the terms in the license
agreement" and click "Next".
5
In the displayed "Customer Information
click "Next".
6
In the displayed "Destination Folder
install the program in and click "Next".
directory path.
7
In the displayed "Ready to Install the Program
install the program in and click "Install".
8
9
Click "Finish" in the displayed "InstallShield Wizard Complete
Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
10
The MDC Unified
specifications.
Press F5 if the execution icon is not displayed.
Uninstallation
1
Select Settings > Control Panel on the StartAdd/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
Chapter 04
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
The appearance may differ depending on the product.
RS232C IN
Computer
43
Using MDC via Ethernet
Connection using a direct LAN cable
The appearance may differ depending on the product.
HDBT (LAN IN) port on the product and the LAN ports on the HUB.
HDBT
(LAN IN)
HUB
Monitor 1
Computer
44
Home feature
Off
PIP
Triple Screen
Four Screen
Multi Screen
HOME Multi ScreenENTER E
Clone Product 비디오 월
Multi Screen
– The displayed image may differ depending on the model.
– Refer to Multi Screen under the chapter OnScreen Display for more information on
SupportGo to Home.
HOME
Chapter 05
45
Picture Mode
HOME Picture ModeENTER E
Picture Mode
– The displayed image may differ depending on the model.
Picture Mode
Video/ImageText
computer.
Shop & Mall
– Select either Video/Image or Text depending on the picture mode.
Office & School
– Select either Video/Image or Text depending on the picture mode.
Terminal & Station
– Select either Video/Image or Text depending on the picture mode.
Video Wall
– Select either Video/Image or Text depending on the picture mode.
Calibration
program Color Expert are applied.
– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
Color Expert.
– Color Expert
46
On/Off Timer
HOME On/Off TimerENTER E
티커
On/Off Timer
– The displayed image may differ depending on the model.
Clock Set.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
On Timer
first.
On Timer 1 ~ On Timer 7)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select ManualOn Timer to turn on your product.
–
Time
Volume
Source: Select the input source of your choice.
Off Timer
Off TimerOff Timer 1 ~ Off Timer 7)
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select ManualOff Timer to turn off your product.
–
Time
47
Holiday Management
Add Holiday
u/dSave
– Start: Set the start date of the holiday.
– End: Set the end date of the holiday.
Edit: Select a holiday item and then change the date.
Delete: Delete selected items from the list of holidays.
Set Applied Timer: Set the On Timer and Off Timer
– Press E to select the On Timer and Off Timer
– The selected On Timer and Off Timer
48
Network Settings
HOME Network SettingsENTER E
– The displayed image may differ depending on the model.
***. ***. ***. ***
***. ***. ***. ***
***. ***. ***. ***
IP Setting: Obtain automatically, Enter manually
IP Address: Manually enter the IP Address if IP Setting is set to Enter manually.
Subnet Mask: Manually enter the Subnet Mask if IP Setting is set to Enter manually.
Gateway: Manually enter the Gateway if IP Setting is set to Enter manually.
Network Settings
IP Setting
IP Address
Close
Enter manually
49
ID Settings
HOME ID SettingsENTER E
Clone Product 비디오 월
ID Settings
– The displayed image may differ depending on the model.
Assign an ID to a set.
Device ID
Press u/dE.
PC Connection Cable
RS232C cable
RJ45(LAN) cable
50
Video Wall
HOME Video WallENTER E
Video Wall
– The displayed image may differ depending on the model.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.
Video Wall
Video Wall.
On.
Off / On
Horizontal x Vertical
The Horizontal x VerticalVideo Wall is set to On.
51
Screen Position
Screen Position feature.
Selecting Screen Position
E
Screen Position.
The Screen PositionVideo Wall is set to On.
To use the function, make sure Horizontal x Vertical is configured.
Format
Full: Display images in full screen.
Natural: Display images in the original aspect ratio.
The FormatVideo Wall is set to On.
More settings
HOME More settingsENTER E
More settings
– The displayed image may differ depending on the model.
The picture settings menu appears.
53
Screen Adjustment
Configure the PictureBacklight, Color Tone, etc.).
The layout of the Picture
Picture Mode
MENU mPicturePicture ModeENTER E
·
·
·
·
·
·
Picture
Picture Mode
Backlight
Brightness
Contrast
Sharpness
Color
80
45
70
65
50
50
– The displayed image may differ depending on the model.
Picture Mode
Video/ImageText
computer.
Shop & Mall
– Select either Video/Image or Text depending on the picture mode.
Office & School
– Select either Video/Image or Text depending on the picture mode.
Terminal & Station
– Select either Video/Image or Text depending on the picture mode.
Video Wall
– Select either Video/Image or Text depending on the picture mode.
Calibration
program Color Expert are applied.
– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
Color Expert.
– Color Expert
Chapter 06
54
Backlight / Brightness / Contrast
/ Sharpness / Color / Tint (G/R)
MENU mPictureENTER E
·
·
·
·
·
·
Picture
Picture Mode
Backlight
Brightness
Contrast
Sharpness
Color
80
45
70
65
50
50
– The displayed image may differ depending on the model.
Picture Mode Picture Mode settings Adjustable options
Shop & Mall, Office & School,
Terminal & Station, Video Wall
Video/Image Backlight / Brightness / Contrast / Sharpness
/ Color / Tint (G/R)
Text Backlight / Brightness / Contrast / Sharpness
Calibration Backlight
When you make changes to Backlight, Brightness, Contrast, Sharpness, Color or Tint (G/R)
55
Color Temperature
MENU mPictureColor TemperatureENTER E
Picture
Color Temperature 16000K
– The displayed image may differ depending on the model.
Color Tone is set to Off.
If Picture Mode is set to Calibration, Color Temperature
White Balance
MENU mPictureWhite BalanceENTER E
Picture
White Balance
– The displayed image may differ depending on the model.
R-Gain / G-Gain / B-Gain
R-Offset / G-Offset / B-Offset
Reset
56
Gamma
MENU mPictureGammaENTER E
Picture
Gamma 0
– The displayed image may differ depending on the model.
If Picture Mode is set to Calibration, Gamma
Calibrated Value
MENU mPictureCalibrated ValueENTER E
Picture
– The displayed image may differ depending on the model.
program Color Expert
Don't Apply / Apply
Color Expert
If Picture Mode is set to Calibration, Calibrated Value
57
Picture Options
MENU mPicturePicture OptionsENTER E
Picture Options
Color Tone
Digital NR
Film Mode
Smart LED
Off
Off
Auto
Off
Off
– The displayed image may differ depending on the model.
Picture Mode Picture Mode settings Adjustable options
Shop & Mall, Office & School,
Terminal & Station, Video Wall
Video/Image Color Tone / Digital NR / HDMI Black Level /
Film Mode / Smart LED
Text Color Tone / Digital NR / HDMI Black Level /
Smart LED
Calibration Digital NR / HDMI Black Level / Smart LED
58
Picture Options
Color Tone
Digital NR
Film Mode
Smart LED
Off
Off
Auto
Off
Off
– The displayed image may differ depending on the model.
Color Tone
If Picture Mode is set to Text
Off / Cool / Normal / Warm
If Picture Mode is set to Video/Image
Off / Cool / Normal / Warm1 / Warm2
If Picture Mode is set to Calibration, Color Tone
Digital NR
Off / On
HDMI Black Level
Auto / Low / Normal
59
Picture Options
Color Tone
Digital NR
Film Mode
Smart LED
Off
Off
Auto
Off
Off
– The displayed image may differ depending on the model.
Film Mode
optimum quality.
Off / Auto
Smart LED
Off / On
60
Picture Size
MENU mPicturePicture SizeENTER E
·
Picture Size
Picture Size
Zoom/Position
– The displayed image may differ depending on the model.
choose size and aspect ratio picture displayed on screen.
Picture Size
Picture SizePicture Mode is Video/Image or Text.
16:9: Sets the picture to 16:9
Zoom1: Use for moderate magnification. Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Smart View 1: Reduces the 16:9
Smart View 2: Reduces the 16:9
Wide: Enlarges the aspect ratio of the picture to fit the entire screen.
4:34:3) mode.
Do not set your product to 4:3 format for a long time.
Screen FitHDMI1, HDMI2
inputted.
Custom
Original: Display images in the original picture quality.
61
·
Picture Size
Picture Size Custom
Zoom/Position
– The displayed image may differ depending on the model.
Zoom/Position
Picture Size is Custom.
From the Zoom/Position
1
Press the dZoom/Position. Press the E
2
Select the Zoom or Position. Press the E
3
Press the u/d/l/r
4
Press the E
Reset in the Zoom/Position screen.
Picture Off
MENU mPicturePicture OffENTER E
Picture
Picture Off
– The displayed image may differ depending on the model.
Selecting Picture Off
Reset Picture
MENU mPictureReset PictureENTER E
Picture
Reset Picture
– The displayed image may differ depending on the model.
Resets your current picture mode to its default settings.
63
OnScreen Display
Multi Screen
MENU m OnScreen DisplayMulti ScreenENTER E
OnScreen Display
Multi Screen
Display Orientation
Screen Protection
Message Display
Menu Language
Reset OnScreen Display
English
– The displayed image may differ depending on the model.
Multi Screen
Off
PIP
Triple Screen
Four Screen
For Multi Screen sound, refer to the Select Sound instructions.
Multi Screen mode, Multi Screen
Off/On.
Multi Screen
Chapter 07
64
PIP
Source
Screen Size
Position
Select Sound
Aspect Ratio
HDMI1
Õ
Ã
Main
Full
Close
– The displayed image may differ depending on the model.
– The displayed image may differ depending on the model.
PIP (Landscape)
Source
Screen Size
Position
Position.
Select SoundMain / SubPIP mode.
Aspect RatioOriginal / Full): Set the screen mode to either Full or Original.
PIP (Portrait)
Source Content Orientation is set to Portrait.
Source
Screen Size
Position
Position.
Select SoundMain / SubPIP mode.
Aspect RatioOriginal / Full): Set the screen mode to either Full or Original.
Source
Screen Size
Position
Select Sound
Aspect Ratio
HDMI1
Main
Full
PIP
Close
65
Restrictions
Main picture Sub picture
DisplayPort1 DisplayPort2, HDMI1, HDMI2, HDBT
DisplayPort2 DisplayPort1, HDMI1, HDMI2, HDBT
HDMI1 DisplayPort1, DisplayPort2, HDMI2, HDBT
HDMI2 DisplayPort1, DisplayPort2, HDMI1, HDBT
HDBT DisplayPort1, DisplayPort2, HDMI1, HDMI2
66
Triple Screen
Main
Screen Size
Select Sound
Close
– The displayed image may differ depending on the model.
Triple Screen
Main
Screen Size
Select Sound
Close
– The displayed image may differ depending on the model.
Triple Screen (Landscape)
Main: Specify Source and Aspect Ratio for the Main screen in Triple Screen mode.
Sub 1: Specify Source and Aspect Ratio for the Sub 1 screen in Triple Screen mode.
Sub 2: Specify Source and Aspect Ratio for the Sub 2 screen in Triple Screen mode.
Screen Size: Set the sizes of the Main, Sub 1 and Sub 2 screens.
Select SoundTriple Screen mode.
Triple Screen (Portrait)
Source Content Orientation is set to Portrait.
Main: Specify Source and Aspect Ratio for the Main screen in Triple Screen mode.
Sub 1: Specify Source and Aspect Ratio for the Sub 1 screen in Triple Screen mode.
Sub 2: Specify Source and Aspect Ratio for the Sub 2 screen in Triple Screen mode.
Screen Size: Set the sizes of the Main, Sub 1 and Sub 2 screens.
Select SoundTriple Screen mode.
67
Four Screen
Main
Select Sound
Close
– The displayed image may differ depending on the model.
Four Screen (Landscape)
Main: Specify Source and Aspect Ratio for the Main screen in Four Screen mode.
Sub 1: Specify Source and Aspect Ratio for the Sub 1 screen in Four Screen mode.
Sub 2: Specify Source and Aspect Ratio for the Sub 2 screen in Four Screen mode.
Sub 3: Specify Source and Aspect Ratio for the Sub 3 screen in Four Screen mode.
Select SoundFour Screen mode.
Four Screen
Main
Select Sound
Close
– The displayed image may differ depending on the model.
Four Screen (Portrait)
Source Content Orientation is set to Portrait.
Main: Specify Source and Aspect Ratio for the Main screen in Four Screen mode.
Sub 1: Specify Source and Aspect Ratio for the Sub 1 screen in Four Screen mode.
Sub 2: Specify Source and Aspect Ratio for the Sub 2 screen in Four Screen mode.
Sub 3: Specify Source and Aspect Ratio for the Sub 3 screen in Four Screen mode.
Select SoundFour Screen mode.
68
Display Orientation
MENU m OnScreen DisplayDisplay OrientationENTER E
Display Orientation
Onscreen Menu Orientation
Source Content Orientation
Aspect Ratio
Landscape
Landscape
Full Screen
– The displayed image may differ depending on the model.
– The Display OrientationInterlace signal mode.
Onscreen Menu Orientation
Configure the menu screen.
Landscape
Portrait: Display the menu in portrait mode on the right side of the product screen.
Source Content Orientation
Landscape
Portrait: Display the screen in portrait mode.
Aspect Ratio
Full Screen: Display the rotated screen in full screen.
Original: Display the rotated screen in the original aspect ratio.
Source Content Orientation is set to Portrait.
If Multi Screen is set to Triple Screen, Four Screen
69
Screen Protection
MENU m OnScreen DisplayScreen ProtectionENTER E
Screen Protection
Pixel Shift
Timer
Immediate Display
Side Gray
Off
Off
– The displayed image may differ depending on the model.
Pixel Shift
Pixel Shift
The Pixel Shift
Pixel Shift
Pixel ShiftOff / On)
Horizontal, Vertical and TimePixel Shift is set to On.
Horizontal
Vertical
Time
Available Pixel Shift Settings and Optimum Settings.
Available Settings Optimum Settings
Horizontal 0 ~ 4 4
Vertical 0 ~ 4 4
Time 1 min. ~ 4 min. 4 min.
The Pixel Shift
Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a
defect in the product.
70
Timer
You can set the timer for Screen Protection.
The Screen Protection feature stops automatically after a specified period of time.
TimerOff / Repeat / Interval)
– Off
– Repeat
– Interval
When Clock Set is configured, Interval
Period, Start Time and End TimeTimer is set to Repeat or Interval.
PeriodScreen Protection function.
Repeat is selected for Timer.
Start Time
Interval is selected for Timer.
End Time
Interval is selected for Timer.
71
Screen Protection
Pixel Shift
Timer
Immediate Display
Side Gray
Off
Off
– The displayed image may differ depending on the model.
Immediate Display
Off / Fading Screen
Side Gray
Off / Light / Dark
Message Display
MENU m OnScreen DisplayMessage DisplayENTERE
Message Display
Source Info
No Signal Message
MDC Message
On
On
On
– The displayed image may differ depending on the model.
Source Info
Off / On
No Signal Message
Off / On
MDC Message
Off / On
Menu Language
MENU mOnScreen DisplayMenu LanguageENTER E
OnScreen Display
Menu Language English
– The displayed image may differ depending on the model.
Set the menu language.
other functions on your PC.
Reset OnScreen Display
MENU mOnScreen DisplayReset OnScreen DisplayENTER E
OnScreen Display
Reset OnScreen Display
– The displayed image may differ depending on the model.
This option returns the current settings under OnScreen Display to the default factory settings.
73
System
Setup
MENU mSystemSetupENTER E
System
Setup
Time
Eco Solution
Change PIN
– The displayed image may differ depending on the model.
Initial settings (System)
Go through the initial setup steps like you did the first time you used this product.
Chapter 08
74
Time
MENU mSystemTimeENTER E
Time
Clock Set
DST
Sleep Timer
Off
0 sec
– The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a
specified time using the Timer function.
Press the INFO
Clock Set
Select Clock Set. Select Date or Time, and then press E.
E
You can set the Date and Time
DST
Off / On
Start Date
End Date
Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
E. To cancel Sleep Timer, select Off.
Power On Delay
the range 0–50 seconds).
75
Auto Source Switching
MENU mSystem Auto Source SwitchingENTER E
끄기
Primary Source
Secondary Source
Off
Off
All
HDMI1
– The displayed image may differ depending on the model.
Auto Source Switching On
Auto Source Switching
When the Auto Source Switching is On
The Primary Source
Secondary Source
When the Primary Source selection is set to All
Primary Source Recovery
The Primary Source RecoveryPrimary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
76
Auto Power On
Off / On
Standby Control
Auto
the display.
The message No Signal
Off
The message No Signal
If No Signal
If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
On
Power Control
MENU mSystemPower ControlENTER E
Off
Auto
Off
– The displayed image may differ depending on the model.
77
Off
Auto
Off
– The displayed image may differ depending on the model.
Network Standby
Off / On
Power Button
Power On Only
Power On/Off
78
Brightness Limit
Off: Off
On: On
Energy Saving
Off / Low / Medium / High
Eco Sensor
Off / On
Backlight setting under PictureEco SensorOff.
If the screen contrast is not sufficient, set the Eco Sensor to Off.
If the Eco Sensor is Off
Min. Backlight
When Eco Sensor is OnMin. Backlight is the darkest
Min. BacklightBacklight setting.
If Eco Sensor is On
surrounding light intensity.
Eco Solution
MENU mSystemEco SolutionENTER E
Eco Solution
Brightness Limit
Eco Sensor
Screen Lamp Schedule
On
Off
Off
Off
Off
Off
– The displayed image may differ depending on the model.
79
Eco Solution
Brightness Limit
Eco Sensor
Screen Lamp Schedule
On
Off
Off
Off
Off
Off
– The displayed image may differ depending on the model.
Screen Lamp Schedule
Clock Set is configured.
Screen Lamp Schedule
Off / On
Schedule1, Schedule2
Time
Lamp at a specified time.
Lamp
0 ~ 100
No Signal Power Off
Off / 15 min. / 30 min. / 60 min.
Auto Power Off
Off / 4 hours / 6 hours / 8 hours
80
Fan & Temperature
MENU mSystem Fan & TemperatureENTER E
System
– The displayed image may differ depending on the model.
Fan Control
Selects auto or manual for the fan speed settings.
Auto / Manual
Fan Speed Setting
Fan Control is set to Manual.
Outdoor Mode
Outdoor Mode to "On."
Off / On
On."
On" rather than to "Off."
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is
The default temperature is set to 90 C.
The recommended operating temperature for this product is 75 to 90 C).
81
The Change PIN
Choose any 4 digits for your PIN and enter it in Enter a new PIN.. Reenter the same 4 digits in Enter the PIN again..
When the Confirm screen disappears, press the Close
Change PIN
MENU mSystem Change PINENTER E
System
Change PIN
– The displayed image may differ depending on the model.
General
MENU m SystemGeneralENTER E
General
Security
HDMI Hot Plug On
– The displayed image may differ depending on the model.
Security
Change PIN function.
Safety Lock
It sets safe lock function.
Off / On
LOCK
Safety Lock function.
LOCK
Power On Button
Safety Lock
Off / On
HDMI Hot Plug
Off / On
HDMI Hot Plug function turned On.
83
This option returns the current settings under system to the default factory settings.
Reset System
MENU mSystemReset SystemENTER E
System
Reset System
– The displayed image may differ depending on the model.
84
Support
Software Update
MENU mSupportSoftware UpdateENTER E
The Software Update
after the upgrade.
Contact Samsung
MENU mSupportContact SamsungENTER E
Contact Samsung and find the product Model Code and Software Version.
Go to Home
MENU mSupport Go to HomeENTER E
HOME
Go to Home
Reset All
MENU mSupport Reset AllENTER E
This option returns all the current settings for a display to the default factory settings.
Chapter 09
85
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
– Before calling Samsung Customer
Center.
Testing the Product
1
2
3
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode
–
Chapter 10
86
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product
and PC.
Screen issue
The power LED is off. The screen will not switch on.
No Signal is displayed on the screen.
HDMI Hot Plug function turned On.
Not Optimum Mode is displayed.
maximum resolution and frequency.
according to the product specifications.
The images on the screen look distorted.
87
Screen issue
The screen is not clear. The screen is blurry.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
The screen is too bright. The screen is too dark.
Brightness and Contrast.
White does not really look white.
Go to PictureWhite Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
after 10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
The screen display does not look normal.
products.
88
Screen issue
The brightness and color do not look normal.
Go to PicturePicture Mode, Color, Brightness and
Sharpness.
Go to SystemEnergy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
The display looks unstable and then freezes.
resolution.
The screen cannot be displayed in full screen.
Remote control issue
The remote control does not work.
89
Source device issue
A beeping sound is heard when my PC is booting.
Other issue
The product smells like plastic.
The monitor appears tilted.
Audio or video cuts out intermittently.
Small particles are found on the edges of the product.
The Multi Screen menu is not available.
Source mode.
When I try to change the PC resolution, a message "The
dened resolution is not currently supported." appears.
The message "The defined resolution is not currently supported." appears if the input source
resolution exceeds the maximum resolution of the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
90
Other issue
There is no sound in HDMI mode.
to the product.
Some PC graphics cards may not automatically recognize HDMI signals that do not include
sound. In this case, manually select a sound input.
Sound input Screen mode
PC Auto PC settings
DVI PC ports) PC settings
HDMI-CEC does not work.
This product does not support the HDMI-CEC feature.
manufacturer for assistance.
91
Other issue
The IR sensor is not functioning.
of the product.
When booting the PC with the input source set to
DisplayPort1, DisplayPort2, the BIOS and booting screens
do not appear.
DisplayPort1,
DisplayPort2.
Q & A
Question Answer
How can I change the frequency?
Set the frequency on your graphics card.
Control Panel Appearance and Themes Display Settings
Advanced MonitorMonitor Settings.
Control Panel Display Settings Advanced Monitor
Monitor Settings.
Control Panel Appearance and Personalization Personalize
Display Settings Advanced Settings MonitorMonitor
Settings.
Control Panel Appearance and Personalization Display Adjust
resolution Advanced Settings MonitorMonitor Settings.
Settings Control Panel Appearance and Personalization Display
Adjust resolution Advanced Settings MonitorMonitor
Settings.
Settings System Display Advanced display settings Display
adapter properties MonitorScreen refresh rate under Monitor settings.
How can I change the resolution?
Control Panel Appearance and Themes Display Settings and
Control Panel Display Settings
Control Panel Appearance and Personalization Personalize
Display Settings
Control Panel Appearance and Personalization Display Adjust
Resolution
Settings Control Panel Appearance and Personalization Display
Adjust Resolution
SettingsSystemDisplayAdvanced display settings
the resolution.
– Refer to the user manual for your
PC or graphics card for further
93
Question Answer
How do I set powersaving mode?
Control Panel Appearance and Themes
Display Screen Saver Settings or BIOS SETUP on the PC.
Control Panel Display Screen Saver
Settings or BIOS SETUP on the PC.
Control Panel Appearance and
Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
Settings Control Panel Appearance and
Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
Settings Personalization Lock screen
Screen timeout settings Power & sleep or BIOS SETUP on the PC.
94
Specications
– Size
– Display area
H
V
General
Model Name OH85F
Panel Size
8584.5 inches / cm)
Display area
1053
73.741.4
Power Supply
Environmental
considerations
Operating
Temperature : -3050 °F – °F)
40
Storage
Temperature : °C – 50-4 °F – °F)
Chapter 11
95
Plug-and-Play
not affect product performance.
measures.
96
Preset Timing Modes
specified for your product.
Model Name OH85F
Synchronization Horizontal Frequency
Vertical Frequency
Resolution Optimum resolution
Maximum resolution
Maximum Pixel Clock
– Horizontal Frequency
The time required to scan a single
line from the left to the right side of
the screen is called a horizontal cycle.
cycle is called horizontal frequency.
Horizontal frequency is measured in
kHz.
– Vertical Frequency
The product displays a single image
or refresh rate. Vertical frequency is
measured in Hz.
97
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 480 31.469 59.940 -/-
31.469 70.087
MAC, 640 x 480 35.000 66.667 -/-
74.551 -/-
68.681 100.000 -/-
VESA, 640 x 480 31.469 59.940 -/-
VESA, 640 x 480 37.861 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 37.879 60.317 40.000
VESA, 800 x 600 48.077 50.000
VESA, 800 x 600 46.875 75.000 49.500
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
78.750
67.500 75.000 108.000
45.000 60.000
59.810 83.500
63.981 108.000
98
Resolution Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
79.976 135.000
VESA, 1366 x 768 59.790 85.500
VESA, 1440 x 900 55.935 59.887 106.500
VESA, 1600 x 900 60.000 60.000 108.000
VESA, 1680 x 1050 59.954
67.500 60.000 148.500
88.787 59.951
67.500 30.000 -/-
99
Appendix
Responsibility for the Pay Service (Cost to
Customers)
Not a product defect
etc.)
purchased product for the first time.
program.
If customer requests an installation additionally after purchasing a product through
home-shopping or online.
A Product damage caused by customer's fault
External impact or drop.
Samsung Electronics Co., Ltd.
Others
So please read User Manual first.
Chapter 12
100
Optimum Picture Quality and Afterimage
Burn-in Prevention
Optimum Picture Quality
Due to the nature of the manufacturing of this product, approximately 1 pixel per million
–
–
product for an extended period of time.
Prevention of Afterimage Burn-in
What is afterimage burn-in?
electrodes in pixels that control the liquid crystals.
Black Matrix
Source Drain
Data Bus-Line
TFT
Gate Pixel Electrode (ITO) Storage
Capaccitor (Cs)
Color-Filter
Common
Electrode (ITO)
101
Preventing afterimage burn-in
limited depending on instruction guide.
–
–
required.
–
Regular color Change
–
FLIGHT FLIGHT
TIME TIME
OZ348
UA102 21:10
20:30
OZ348
UA102 21:10
20:30
Type 1 Type 2
amount of light emitted.)
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
Regular Text color Change
–
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
FLIGHT TIME
OZ348 20:30
:
:
–
FLIGHT TIME
OZ348 20:30
:
:
[ Step 3 ]
[ Step 2 ]
FLIGHT TIME
OZ348
:
:
[ Step 1 ]
20:30
–
hours.
License
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Open Source Licence Notice
For information on the Open Source Licence Notice, contact the Samsung Customer Center
103
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
the screen resolution. The scanning
scanning method.
- Scanning
Scanning refers to a process of
sending pixels that form an image
- Interlaced
other line of pixels is scanned from
not scanned) are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
horizontal line from the top to the
Interlace mode displays the odd
mode is mainly used in monitors
as it produces screen clarity and
interlace mode is mainly used in
TVs.
Dot Pitch____ The screen consist of
a higher resolution. Dot pitch refers
color. Dot pitch is measured in
millimeters.
Vertical Frequency____ The product
displays a single image many times
that flickers) to display an image for
frequency or refresh rate. Vertical
frequency is measured in Hz.
E.g. 60Hz refers to a single image
second.
Horizontal Frequency____ The
time required to scan a single line
from the left to the right side of
the screen is called a horizontal
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
Source____ Input source refers to
the product such as a camcorder or
Plug & Play
a monitor and PC to produce an
The product uses VESA DDC
Resolution____ Resolution is the
form a screen. It represents the
useful to perform multiple tasks
simultaneously.
DVD (Digital Versatile Disc)____
DVD refers to a CD-sized mass
compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
Multiple Display Control (MDC)____
simultaneously using a PC.