Shuttle DIR 01 DIN-Rail Mounting Kit for Shuttle XPC slim series User Manual
Displayed below is the user manual for DIR 01 DIN-Rail Mounting Kit for Shuttle XPC slim series by Shuttle which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
Product Specifications
w w w . s h u t t l e . e u
Shuttle C omputer H andels G m bH
Fr itz-Str assmann - St r . 5
25337 Elm shorn | German y
Tel. +49 (0) 4121-47 68 60
Fax +4 9 ( 0) 4121- 47 69 00
sa le s@ sh ut t le .e u
Page 1 18 September 2019
© 2019 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice . Pictures for illustration purposes only.
DIN-Rail Mounting Kit for
Shuttle XPC slim series in 1.3-litre format
A DIN-Rail is a metal rail widely used for mounting
electronic control equipment inside equipment racks.
The Shuttle XPC accessory DIR01 allows the installation of
1-litre XPC slim barebones on a standard 35 mm DIN-
Rail. Should the required VESA mount (100 x 100 mm) not
be included with your Shuttle XPC, it is available
optionally.
Feature Highlights
Scope of
delivery
1. Stainless steel plate, 1.5 mm thick,
164 x 134 x 7 mm (WHD)
2. DIN-Rail mounting clip
for standard 35 mm DIN-Rail
3. 4x countersunk-head screw (M4 x 8 mm)
4. Quick Guide
Compatibility
The Shuttle XPC accessory DIR01 is
compatible with Shuttle XPCs in 1.3-litre
format:
Shuttle XPC slim Barebones (fanless):
DX30(V2), DL10J, DS47, DS407(T), DS437(T),
DS57Ux, DS67Ux, DS68U, DS77Ux, DS10Ux
Shuttle XPC slim Barebones (with fan):
DH02Ux, DS61, DS81, DS81L, DH110,
DH110SE*, DH170, DQ170, DH270, DH310,
DH310V2, DH310S*, DH370
*) Note: The DH110SE and DH310S do not
include the required VESA mount. This is
available separatelyas the Shuttle XPC
accessory PV04.
Shuttle XPC accessory
DIR01
DIN-Rail Mounting Kit
Images for illustration purposes only.
Sample photo: Shuttle XPC slim DS10U
mounted on a 35 mm DIN-Rail.
Product Specifications
w w w . s h u t t l e . e u
Shuttle C omputer H andels G m bH
Fr itz-Str assmann - St r . 5
25337 Elm shorn | German y
Tel. +49 (0) 4121-47 68 60
Fax +4 9 ( 0) 4121- 47 69 00
sa le s@ sh ut t le .e u
Page 2 18 September 2019
© 2019 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice . Pictures for illustration purposes only.
Quick Installation Guide for DIR01
(1) Install the mounting clip with four screws on the steel plate. To do so, please use the
parts of the DIR01 kit.
(2) Mount the VESA mount of the Shuttle XPC to the steel plate using four M4 screws.
(3) Place the Shuttle XPC on the VESA mount and affix with four M3 screws from the sides.
The device is ready to be mounted on a DIN-Rail now.
Note: The VESA mounting kit with eight screws is either included with your Shuttle XPC or to
be purchased separately.