About this manual
Getting Started
Disc/USB Playback
USB Transfer
- Before using the USB device
- Transferring music
Tuner
- Listening to the radio
BLUETOOTH Connection
Sound Adjustment
Other Operations
Additional Information

Sony MHC-M40D CON DVD KARAOKE BLUETHOOT User Manual

Displayed below is the user manual for MHC-M40D CON DVD KARAOKE BLUETHOOT by Sony which is a product in the Home Audio Systems category. This manual has pages.

Related Manuals

Sony MDR-RF811RK + DVD Fast & Furious 8 (2017) Manual

Sony MDR-RF811RK + DVD Jurassic World: Fallen Kingdom (2018) Manual

Sony MDR-RF811RK + DVD Spider-Man: Far From Home Manual

Samsung DVD-E360 Manual

LG DP132 DVD Manual

ASUS ESC300 G4-7500003Z CI5-7500 1TB+128SSD 8GB DVD GTX1060 NOOS Manual

Contour Design Contour+2 Manual

Contour Design Contour Wireless L Manual

MHC-M80D/MHC-M60D/MHC-M40D

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Home Audio System

Operating Instructions

Getting Started

Disc/USB Playback

USB Transfer

Tuner

BLUETOOTH Connection

Sound Adjustment

Other Operations

Additional Information

2GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

WARNING

To reduce the risk of fire, do not

cover the ventilation opening of

the appliance with newspapers,

tablecloths, curtains, etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric

shock, do not expose this appliance

to dripping or splashing, and do not

place objects filled with liquids, such as

vases, on the appliance.

As the main plug is used to disconnect

the unit from the mains, connect the

unit to an easily accessible AC outlet.

Should you notice an abnormality in

the unit, disconnect the main plug

from the AC outlet immediately.

Do not install the appliance in a

confined space, such as a bookcase or

built-in cabinet.

The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has

been turned off.

Indoor use only.

For product with CE marking

The validity of the CE marking is

restricted to only those countries

where it is legally enforced, mainly in

the countries EEA (European Economic

Area).

CAUTION

Risk of explosion if the battery is

replaced by an incorrect type.

Do not expose batteries or appliances

with battery-installed to excessive

heat, such as sunshine and fire.

CAUTION

The use of optical instruments with

this product will increase eye hazard.

This appliance is classified as a CLASS 1

LASER product under IEC 60825-1:2007

and IEC 60825-1:2014. This marking is

located on the rear exterior of the unit.

For customers in Europe

Disposal of waste batteries

and electrical and electronic

equipment (applicable in the

European Union and other

countries with separate

collection systems)

This symbol on the

product, the battery or on

the packaging indicates

that the product and the

battery shall not be

treated as household

waste. On certain batteries this symbol

might be used in combination with a

chemical symbol. The chemical symbol

for lead (Pb) is added if the battery

contains more than 0.004% lead. By

ensuring that these products and

batteries are disposed of correctly, you

will help to prevent potentially

negative consequences for the

environment and human health which

could be caused by inappropriate

waste handling. The recycling of the

materials will help to conserve natural

resources. In case of products that for

safety, performance or data integrity

reasons require a permanent

connection with an incorporated

battery, this battery should be replaced

by qualified service staff only. To

ensure that the battery and the

electrical and electronic equipment

will be treated properly, hand over

these products at end-of-life to the

appropriate collection point for the

3GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

recycling of electrical and electronic

equipment. For all other batteries,

please view the section on how to

remove the battery from the product

safely. Hand the battery over to the

appropriate collection point for the

recycling of waste batteries. For more

detailed information about recycling of

this product or battery, please contact

your local Civic Office, your household

waste disposal service or the shop

where you purchased the product or

battery.

Notice for customers: the

following information is only

applicable to equipment sold

in countries applying EU

directives.

This product has been manufactured

by or on behalf of Sony Corporation.

EU Importer: Sony Europe Limited.

Inquiries to the EU Importer or related

to product compliance in Europe

should be sent to the manufacturer’s

authorized representative, Sony

Belgium, bijkantoor van Sony Europe

Limited, Da Vincilaan 7-D1, 1935

Zaventem, Belgium.

MHC-M60D only:

Hereby, Sony Corporation declares that

this equipment is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of

conformity is available at the following

internet address:

http://www.compliance.sony.de/

This radio equipment is intended to

be used with the approved version(s)

of software that are indicated in

the EU Declaration of Conformity.

The software loaded on this radio

equipment is verified to comply with

the essential requirements of the

Directive 2014/53/EU.

You can check the software version

by pressing OPTIONS, then select

“SYSTEM” – “VERSION” using /

and .

This equipment has been tested

and found to comply with the limits

set out in the EMC regulation using

a connection cable shorter than

3meters.

This Home Audio System is designed

to be used for the following purposes:

•Playing back music/video sources

on discs or USB devices

•Transferring music to USB devices

•Listening to radio stations

•Listening to TV sound

•Playing back music sources on

BLUETOOTH devices

•Enjoying social gatherings with the

Wireless Party Chain function

4GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-17(1)

For customers in Australia

Disposal of old

electrical &

electronic

equipment

(applicable in the

European Union and

other countries with

separate collection

systems)

License and Trademark Notice

• is a trademark of DVD Format/

Logo Licensing Corporation.

• “DVD+RW”, “DVD-RW”, “DVD+R”,

“DVD-R”, “DVD VIDEO”, and the “CD”

logos are trademarks.

• WALKMAN® and WALKMAN® logo

are registered trademarks of Sony

Corporation.

• MPEG Layer-3 audio coding

technology and patents licensed

from Fraunhofer IIS and Thomson.

• Windows Media is either a

registered trademark or trademark

of Microsoft Corporation in

the United States and/or other

countries.

• This product is protected by

certain intellectual property rights

of Microsoft Corporation. Use or

distribution of such technology

outside of this product is prohibited

without a license from Microsoft or

an authorized Microsoft subsidiary.

• This system incorporates Dolby*

Digital.

* Manufactured under license from

Dolby Laboratories. Dolby, Dolby

Audio, and the double-D symbol are

trademarks of Dolby Laboratories.

• This system incorporates High-

Definition Multimedia Interface

(HDMI™) technology. The terms

HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI

Logo are trademarks or registered

trademarks of HDMI Licensing

Administrator, Inc. in the United

States and other countries.

• “BRAVIA” is a trademark of Sony

Corporation.

• LDAC™ and LDAC logo are

trademarks of Sony Corporation.

• The BLUETOOTH® word mark and

logos are registered trademarks

owned by the Bluetooth SIG, Inc.

and any use of such marks by Sony

Corporation is under license. Other

trademarks and trade names are

those of their respective owners.

• Android is a trademark of Google

LLC.

• Google Play is a trademark of

Google LLC.

• Apple, the Apple logo, iPhone, iPod,

and iPod touch are trademarks of

Apple Inc., registered in the U.S.

and other countries. App Store

is a service mark of Apple Inc.,

registered in the U.S. and other

countries.

• Use of the Made for Apple badge

means that an accessory has been

designed to connect specifically to

the Apple product(s) identified in

the badge, and has been certified

by the developer to meet Apple

performance standards. Apple is not

responsible for the operation of this

device or its compliance with safety

and regulatory standards.

• THIS PRODUCT IS LICENSED UNDER

THE MPEG-4 VISUAL PATENT

PORTFOLIO LICENSE FOR THE

PERSONAL AND NON-COMMERCIAL

USE OF A CONSUMER FOR

5GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-17(1)

(i) ENCODING VIDEO IN

COMPLIANCE WITH THE MPEG-4

VISUAL STANDARD (“MPEG-4

VIDEO”)

AND/OR

(ii) DECODING MPEG-4 VIDEO THAT

WAS ENCODED BY A CONSUMER

ENGAGED IN A PERSONAL AND

NON-COMMERCIAL ACTIVITY

AND/OR WAS OBTAINED FROM

A VIDEO PROVIDER LICENSED TO

PROVIDE MPEG-4 VIDEO.

NO LICENSE IS GRANTED OR SHALL

BE IMPLIED FOR ANY OTHER

USE. ADDITIONAL INFORMATION

INCLUDING THAT RELATING TO

PROMOTIONAL, INTERNAL AND

COMMERCIAL USES AND LICENSING

MAY BE OBTAINED FROM MPEG LA,

L.L.C.

HTTP://WWW.MPEGLA.COM

• All other trademarks are trademarks

of their respective owners.

• In this manual, ™ and ® marks are

not specified.

About this manual

••The instructions in this manual are

for models MHC-M80D,

MHC-M60D, and MHC-M40D.

In this manual, the MHC-M80D

is used for illustration purpose

unless stated otherwise.

••This manual mainly explains

operations using the remote

control, but the same operations

can also be performed using the

buttons on the unit having the

same or similar names.

••Icons, such as , listed at the

top of each explanation indicate

the type of media that can be used

with the function being explained.

••Some illustrations are presented

as conceptual drawings, and

may be different from the actual

products.

••The items displayed on the TV

screen may vary depending on

the area.

••The default setting is underlined.

••The text enclosed in bracket ([--])

appears on the TV screen, and the

text enclosed in double quotation

mark (“--”) appears on the display.

6GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Table of Contents

About this manual ................. 5

Unpacking ..............................8

Playable discs or files on

discs/USB device ...................8

Websites for compatible

devices .................................. 11

Guide to parts and

controls .................................12

Getting Started

Hooking up the system

securely ................................. 17

Deactivating the

demonstration ......................21

Inserting batteries ................21

Positioning the speakers ......21

Connecting the TV ............... 22

Changing the color

system .................................. 24

Performing the quick

setup .................................... 24

Changing the display

mode .................................... 25

Disc/USB Playback

Before using the USB

device ................................... 25

Basic playback ..................... 25

Other playback

operations ............................ 26

Using play mode .................. 29

Restricting playback of the

disc (Parental Control) .......... 30

Viewing information of a

disc and USB device ..............31

Using the Setup Menu ......... 32

USB Transfer

Before using the USB

device ...................................36

Transferring music ............... 36

Tuner

Listening to the radio ........... 39

BLUETOOTH Connection

About the BLUETOOTH

wireless technology ............. 40

Pairing this system with a

BLUETOOTH device ...............41

Listening to music on a

BLUETOOTH device .............. 42

Connecting this system with

multiple BLUETOOTH devices

(Multi-device connection) ... 42

Setting the BLUETOOTH

audio codecs ........................43

Setting the BLUETOOTH

standby mode ......................44

Turning on or off the

BLUETOOTH signal ...............44

Controlling the system using

a smartphone or tablet

(Sony | Music Center) ...........45

7GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Getting frenzied parties

with the “Fiestable” app .......46

Achieving and sharing a

Party People ranking and

getting bonus features

with Party King ..................... 46

Sound Adjustment

Adjusting the sound ............ 47

Adjusting the subwoofer

level (MHC-M80D only) ........ 47

Selecting the Virtual

Football mode ...................... 47

Creating your own sound

effect .................................... 48

Creating a party atmosphere

(DJ Effect) .............................48

Other Operations

Using the Control for HDMI

function ................................49

Enjoying wireless playback

using multiple systems

(Wireless Party Chain

function) ...............................51

Singing along: Karaoke ........ 53

Using the Voice Guidance ....54

Enjoying sound from a

guitar ....................................54

Enjoying music with the

Party Light and Speaker

Light (MHC-M80D/

MHC-M60D only) ................. 55

Using the Sleep Timer ..........56

Using optional equipment ...56

Deactivating the buttons on

the unit (Child Lock) .............56

Setting the automatic

standby function.................. 56

Updating the software ......... 57

Additional Information

Troubleshooting .................. 57

Precautions .......................... 67

Specifications .......................69

Language code list .............. 73

8GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Unpacking

••Remote control (1)

••R03 (size AAA) batteries (2)

••FM lead antenna (1)

••AC power cord (mains lead) (1)

••AC plug adaptor* (1) (supplied only

for certain areas)

* This plug adaptor is not for the use in

Chile, Paraguay and Uruguay. Use this

plug adaptor in the countries where it

is necessary.

MHC-M80D only

••Unit: HCD-M80D (1)

••Speaker system: SS-M80D (2)

••Subwoofer: SS-WM80D (1)

MHC-M60D only

••Unit: HCD-M60D (1)

••Speaker system: SS-M60D (2)

MHC-M40D only

••Unit: HCD-M40D (1)

••Speaker system: SS-M40D (2)

Note

When unpacking or handling a big

and/or heavy speaker, be sure to handle

the speaker with two or more persons.

Dropping the speaker may cause

personal injury and/or property damage.

IMPORTANT NOTICE

Caution: This product is not portable

and is not specifically designed to

be easily carried. It must be securely

placed on a cabinet.

Playable discs or files

on discs/USB device

Playable discs

••DVD VIDEO

••DVD-R/DVD-RW in DVD VIDEO

format or video mode

••DVD+R/DVD+RW in DVD VIDEO

format

••VIDEO CD (Ver. 1.0, 1.1, and 2.0

discs)

••Super VCD

••CD-R/CD-RW/CD-ROM in VIDEO

CD format or super VCD format

••AUDIO CD

••CD-R/CD-RW in AUDIO CD format

Playable files on discs

••Music:

MP3 files (.mp3)*1*2

••Video:

MPEG4 files (.mp4/.m4v)*2*3, Xvid

files (.avi)

Playable files on USB device

••Music:

MP3 files (.mp3)*1*2, WMA files

(.wma)*2, AAC files (.m4a/.mp4/

.3gp)*2, WAV files (.wav)*2

••Video:

MPEG4 files (.mp4/.m4v)*2*3, Xvid

files (.avi)

Note

••The discs must be in the following

format:

— CD-ROM/-R/-RW in DATA CD format

that contains the MP3*1*2, MPEG4*2*3

and Xvid files, and conforms to

ISO 9660*4 Level 1/Level 2 or Joliet

(extended format).

— DVD-ROM/-R/-RW/+R/+RW in

DATA DVD format that contains the

MP3*1*2, MPEG4*2*3 and Xvid files,

and conforms to UDF (Universal Disk

Format).

••The system will attempt to play back

any data with the extensions above,

even if it is not in the supported format.

Playing this data may generate a

loud noise which could damage your

speaker system.

9GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

*1 MP3 (MPEG 1 Audio Layer 3) is a

standard format defined by ISO/

MPEG for compressed audio data. MP3

files must be in MPEG 1 Audio Layer 3

format.

*2 Files with copyright protection (Digital

Rights Management) cannot be played

back by the system.

*3 MPEG4 files must be recorded in MP4

file format. Supported video codec and

audio codec are as follows:

— Video codec: MPEG4 Simple Profile

(AVC is not supported.)

— Audio codec: AAC-LC (HE-AAC is not

supported.)

*4 A logical format of files and folders

on CD-ROMs, defined by ISO

(International Organization for

Standardization).

Discs/files that cannot be played

back

••You cannot play back the

following discs

•—BDs (Blu-ray Discs)

•—CD-ROMs recorded in PHOTO CD

format

•—Data part of CD-Extra or Mixed

Mode CDs*

•—CD Graphics disc

•—Super Audio CDs

•—DVD Audio

•—DATA CD/DATA DVD that is

created in Packet Write format

•—DVD-RAM

•—DATA CD/DATA DVD which has

not been correctly finalized

•—CPRM (Content Protection for

Recordable Media) compatible

DVD-R/-RW recorded in Copy-

Once programs

•—A disc that has a non-standard

shape (e.g., heart, square, star)

•—A disc that has adhesive tape,

paper, or a sticker attached to it

••You cannot play back the

following files

•—The video files which is larger

than 720 (width) × 576 (height)

pixels.

•—The video files with a high width

to length ratio.

•—A WMA file in WMA DRM, WMA

Lossless, or WMA PRO format.

•—An AAC file in AAC DRM or AAC

Lossless format.

•—The AAC files which is encoded

at 96 kHz.

•—Files that are encrypted or

protected by passwords.

•—Files with DRM (Digital Rights

Management) copyright

protection.

•—Some Xvid files that are longer

than 2 hours.

••The MP3 PRO audio file can be

played back as MP3 file.

••The system may not play back an

Xvid file when the file has been

combined from two or more Xvid

files.

* Mixed Mode CD: This format records

data on the first track and audio (AUDIO

CD data) on the second and subsequent

tracks of a session.

Notes on CD-R/-RW and

DVD-R/-RW/+R/+RW

••In some cases, a CD-R/-RW and

DVD-R/-RW/+R/+RW cannot

be played back on this system

due to the recording quality or

physical condition of the disc, or

the characteristics of the recording

device and authoring software.

For more information, refer to

the operating instructions of the

recording device.

••Some playback functions may not

work with some DVD+Rs/+RWs,

even if they have been correctly

finalized. In this case, view the disc

by normal playback.

10GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Notes on discs

••This product is designed to play

back discs that conform to the

Compact Disc (CD) standard.

••DualDisc and some music discs

encoded with copyright protection

technologies do not conform to

the CD standard. Therefore, these

discs may not be compatible with

this product.

Note on multisession disc

This system can play back

continuous sessions on a disc when

they are recorded in the same

format as the first session. However,

the playback is not guaranteed.

Note on DVD VIDEO and VIDEO

CD playback operations

Some playback operations for

a DVD VIDEO or VIDEO CD may

be intentionally restricted by

software producers. Therefore,

some playback features may not

be available. Be sure to read the

operating instructions of the DVD

VIDEO or VIDEO CD.

Notes on playable files

••Playback may take a longer time

to start when:

•—a DATA CD/DATA DVD/USB

device is recorded with a

complicated tree structure.

•—the audio files or video files in

another folder have just been

played back.

••The system can play back a DATA

CD/DATA DVD or a USB device in

the following conditions:

•—up to a depth of 8 folders

•—up to 300 folders

•—up to 999 files in a disc

•—up to 2,000 files in a USB device

•—up to 650 files in a folder

These numbers may vary

depending on the file or folder

configuration.

••Folders that have no audio files or

video files are skipped.

••Files transferred by a device such

as a computer may not be played

back in the order in which they

were transferred.

••The playback order may not be

applicable depending on the

software used for creating the

audio file or video file.

••Compatibility with all encoding/

writing software of the supported

formats, recording devices,

and recording media cannot be

guaranteed.

••Depending on the Xvid file, the

picture may be unclear or the

sound may skip.

Notes about USB devices

••This system is not guaranteed to

operate with all USB devices.

••Although there are a variety

of complex functions for USB

devices, the playable contents

of USB devices connected to

the system are music and video

contents only. For details, refer to

the operating instructions of the

USB device.

••When a USB device is inserted,

the system reads all the files on

the USB device. If there are many

folders or files on the USB device,

it may take a long time to finish

reading the USB device.

••Do not connect the system and

the USB device through a USB hub.

••With some connected USB

devices, there may be a delay

before an operation is performed

by this system.

11GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••The playback order for the system

may differ from the playback order

of the connected USB device.

••Before using a USB device, make

sure that no virus-ridden files are

on the USB device.

Websites for

compatible devices

Check the websites below for the

latest information about compatible

USB and BLUETOOTH devices.

For customers in Latin America:

<http://esupport.sony.com/LA>

For customers in Europe and

Russia:

<http://www.sony.eu/support>

For customers in other countries/

regions:

<http://www.sony-asia.com/

support>

Compatible iPhone/iPod models

The compatible iPhone/iPod models

are as follows. Update your iPhone/

iPod with the latest software before

using with the system.

Made for

••iPhone X

••iPhone 8

••iPhone 8 Plus

••iPhone 7

••iPhone 7 Plus

••iPhone SE

••iPhone 6s

••iPhone 6s Plus

••iPhone 6

••iPhone 6 Plus

••iPhone 5s

••iPhone 5c

••iPhone 5

••iPhone 4s

••iPod touch (6th generation)

••iPod touch (5th generation)

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

12GB

Guide to parts and controls

You can lock the keys except  (power) on the unit to prevent them from

being operated by mistake (page 56).

Unit (Front)

  

















 

* The  and MIC/GUITAR LEVEL + buttons have a tactile dot. Use the tactile dot as a

reference when operating the system.

  (power)

Turns on the system, or sets it to

standby mode.

 BLUETOOTH

Selects BLUETOOTH function.

BLUETOOTH indicator (page

40)

PAIRING

Hold down to activate

BLUETOOTH pairing during

BLUETOOTH function.

 Display

 Remote control sensor

(page21)

 FIESTA (page 47)

SOUND FIELD (page 47)

 Disc tray

  (open/close)

Opens or closes the disc tray.

 +/– (select folder)

Selects a folder on a data disc or

a USB device.

/ (go backward/go

forward) (page 26)

TUNING+/– (page 39)

S1, S2, S3, S4 (page 48)

13GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

 MIC ECHO (page 53)

GUITAR (page 55)

MIC/GUITAR LEVEL +/–

(page 54)

 MIC1 jack

Use to connect the microphone.

MIC2/GUITAR jack

Use to connect the microphone

or guitar.

(USB) (REC/PLAY) port

Use to connect a USB device.

This port can be used for both

playback and music transfer.

 MEGA BASS (page 47)

 Front panel lighting

(MHC-M80D/MHC-M60D only)

If the front panel lighting is

glaring, do not look directly at it.

 SAMPLER (page 48)

DJ OFF (page 49)

•VOLUME/DJ CONTROL knob

Adjusts the volume.*

Adjusts the FLANGER and

ISOLATOR effect or outputs

the SAMPLER sound effect

continuously (page 48).

* You cannot use this knob to adjust

the volume when DJ Effect is

selected.

 FLANGER (page 48)

ISOLATOR (page 48)

 W.PARTY CHAIN (Wireless

Party Chain) (page 51)

PARTY LIGHT (page 25,

55)

(MHC-M80D only)

SPEAKER LIGHT (page 55)

(MHC-M60D only)

FOOTBALL (page 47)

(MHC-M40D only)

VOCAL FADER (page 53)

VOICE CHANGER (page 54)

  (stop)

— Stops playback.

When pressed twice, resume

playback can be canceled.

— Stops transfer during music

transfer.

— Stops the built-in sound

demonstration.

 (play)

Starts playback.

Hold down  for more than

2 seconds, the built-in sound

demonstration will be played

back. To stop the demonstration,

press .

 FUNCTION

Selects a function.

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

14GB

Speaker (Rear)

MHC-M80D only

 Party Light

Do not look directly at the light

emitting part when the Party

Light is turned on.

Each speaker has different

direction of Party Light.

Remote control

MHC-M80D/

MHC-M60D

MHC-M40D

  (power)

Turns on the system, or sets it to

standby mode.

 DISPLAY (page 21, 25,

32, 39, 41)

Changes the information on the

display.

SLEEP (page 56)

PLAY MODE (page 29,

37)

MHC-M80D/MHC-M60D only:

DISPLAY*1 (page 31)

Views or hides the on-screen

display.

PARTY LIGHT (page 25,

55)

LIGHT MODE (page 55)

15GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

REPEAT/FM MODE (page

30, 39)

MHC-M40D only:

DISPLAY (page 31)

Views or hides the on-screen

display.

FM MODE (page 39)

REPEAT (page 30)

 Numeric (0 – 9) buttons*1*2

— Selects a track, chapter or file

with its item number.

— Enters numbers or values.

MEGA BASS (page 47)

REC TO USB

Transfers music to the USB

device connected to the

(USB) port.

MEDIA MODE (page 26)

Selects the media to be played

back on a data disc or USB

device.

SUBTITLE (page 28)

AUDIO*2 (page 28, 32)

ANGLE (page 28)

SCORE (page 53)

VOICE CHANGER (page 54)

MIC LEVEL +/– (page 53)

VOCAL FADER (page 53)

MIC ECHO (page 53)

 +/– (select folder)

Selects a folder on a data disc or

a USB device.

KEY CONTROL / (page

53)

 DVD TOP MENU

Displays the DVD title on the TV

screen.

DVD/TUNER MENU (page

26, 27, 40)

RETURN (page 26)

OPTIONS

Enters or exits the options menu.

/ / /

Selects the menu items.

(enter)

Enters/confirms the settings.

CLEAR (page 27)*1

SETUP (page 32)*1

 FUNCTION

Selects a function.

SEARCH (page 26, 27)

SHIFT*1

Hold down to activate the

buttons printed in pink.

SOUND FIELD +/– (page 47)

 (volume) +/–*2

Adjusts the volume.

 / (fast reverse/fast

forward) (page 27)

/ (slow back/slow

forward) (page 27)

TUNING+/– (page 39)

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

16GB

 (play)*2

Starts playback.

/ (go backward/go

forward) (page 26)

PRESET+/– (page 40)

 (pause)

Pauses playback. To resume

playback, press .

 (stop)

— Stops playback.

When pressed twice, resume

playback can be canceled.

— Stops transfer during music

transfer.

— Stops the built-in sound

demonstration.

*1 This button is printed in pink. To use

this button, hold down SHIFT () and

press this button.

*2 The numeric button 5/AUDIO,  +

and  buttons have a tactile dot. Use

the tactile dot as a reference when

operating the system.

17GB

Getting Started

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Getting Started

Hooking up the system securely

Unit (Rear)

MHC-M80D

MHC-M60D

18GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

MHC-M40D

 Speakers

(MHC-M80D only)

••PARTY LIGHT SUBWOOFER/L/R terminals

Connect the Party Light connector of the speaker to this terminal. The

lighting on the speakers will react according to the music source. You can

select the Party Light according to your preference (page 55).

Note

Each speaker has different direction of Party Light. You can connect any speaker as

left or right speaker according to the lighting patterns you want.

••MID/TWEETERS L/R terminals

Connect the speaker connector of the speaker to this terminal.

••WOOFERS L/R terminals

Connect the speaker connector of the speaker to this terminal.

••SUBWOOFER

Connect the speaker connector of the subwoofer to this terminal.

(MHC-M60D only)

••SPEAKER LIGHT L/R terminals

Connect the Speaker Light connector of the speaker to this terminal.

You can also select the Speaker Light according to your preference

(page 55).

••MID/TWEETERS L/R terminals

Connect the speaker connector of the speaker to this terminal.

••WOOFERS L/R terminals

Connect the speaker connector of the speaker to this terminal.

(MHC-M40D only)

••SPEAKERS L/R terminals

Connect the speaker connector of the speaker to this terminal.

19GB

Getting Started

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Example:

Note

••Be sure to use only the supplied speakers.

••When connecting speaker cables, insert the connector straight into the terminals.

 FM ANTENNA terminal

Find a location and an orientation that provide good reception when you

set up the antenna.

Keep the antenna away from the speaker cables, the AC power cord (mains

lead) and the USB cable to avoid picking up noise.

Extend the FM lead

antenna horizontally

 AUDIO IN (TV) L/R jacks

Use an audio cable (not supplied) to connect to the audio output jacks of a

TV or an audio/video equipment. The sound is output through this system.

 HDMI OUT (TV) ARC jack

Use an HDMI cable (not supplied) to connect to the HDMI input jack of a TV

(page 22).

From speaker (right)

White Red

20GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

 AC power cord (mains lead)

Connect the AC power cord (mains lead) (supplied) to the unit, then plug it

into a wall outlet.

AC power cord

(mains lead)

(supplied)

To the wall outlet

When the AC power cord (mains lead) is connected, the demonstration

(page 25) starts automatically. If you press  (power) to turn on the

system, the demonstration ends.

21GB

Getting Started

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Deactivating the

demonstration

To deactivate the demonstration

while the system is turned off, press

DISPLAY repeatedly to select the no

display mode (Power Saving Mode)

(page 25).

Inserting batteries

Insert the two supplied R03 (size

AAA) batteries, matching the

polarities shown below.

Note

••Do not mix an old battery with a new

one or mix different types of batteries.

••If you do not use the remote control

for a long period of time, remove the

batteries to avoid damage from battery

leakage and corrosion.

To operate the system using the

remote control

Point the remote control at the unit’s

remote control sensor.

Positioning the

speakers

To obtain optimum performance

from the system, we recommend

you to place the speakers as shown

below.

 Unit

 Speaker (left)

 Speaker (right)

 Subwoofer (MHC-M80D only)

 TV

0.3 m 0.3 m

Note

(MHC-M80D only)

To obtain optimum Party Light effects, we

recommend you to place the speakers

from the wall as shown below.

45 cm

22GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Connecting the TV

Before connecting cables, be sure to disconnect the AC power cord (mains

lead).

Note on placing the unit

Heat buildup on the unit is due to electric circuit operation even if it is

operated at low volume. Do not place the unit in a confined space, such as a

rack. Do not cover the ventilation holes with newspapers, tablecloths, curtains,

etc. Place the unit at least 10 cm from the surrounding wall and objects.

To watch video

Connect the HDMI cable (not supplied) to the system.

HDMI IN (ARC)*

HDMI IN

High Speed HDMI Cable with

Ethernet (not supplied)

* You can listen to TV sound via the system if you connect the system to the TV’s HDMI

IN (ARC) jack. The Audio Return Channel (ARC) function enables the TV to output

sound through the system with an HDMI connection, without performing an audio

connection (connection  below). To set the ARC function on this system, see

[AUDIO RETURN CHANNEL] (page 36). To check the compatibility of your TV’s ARC

function, refer to the operating instructions supplied with your TV.

23GB

Getting Started

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

To listen to TV sound via the system

Choose one of the connections below (  or  ).

AUDIO OUT

HDMI IN (ARC)

 Audio cable (not supplied)

 High Speed HDMI Cable with

Ethernet (not supplied)

To listen to TV sound, press FUNCTION repeatedly to select “TV”.

Hint

••You can also enjoy the sound of external equipment (DVD players, etc.) via the system

by connecting to the AUDIO IN (TV) L/R jack as connection  above. For details, refer to

the operating instructions of your equipment.

••If the audio output level from the system is low when connecting the external

equipment, try adjusting the audio output settings on the connected equipment. It

may improve the audio output level. For details, refer to the operating instructions of

your equipment.

If “CODE 01” and “SGNL ERR” appear on the display of the unit

When the audio input signals to the system are other than 2-channel

Linear PCM signals, the messages “CODE 01” and “SGNL ERR” (indicate that

the input audio signals are unsupported) appear on the display of the unit.

In this case, select the proper audio output mode on the TV in order

to output 2-channel Linear PCM audio signals. For details, refer to the

operating instructions of your TV.

24GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Changing the color

system

(Except for Latin American,

European, and Russian models)

Set the color system to PAL or NTSC

depending on the color system of

your TV.

Each time you perform the

procedure below, the color system

changes as follows:

NTSC  PAL

Use the buttons on the unit to

perform this operation.

1 Press  to turn on the system.

2 Press FUNCTION repeatedly to

select “DVD/CD”.

3 Hold down VOCAL FADER and

SOUND FIELD for more than

3seconds.

“NTSC” or “PAL” appears on the

display.

Performing the quick

setup

Before using the system, you

can make the minimum basic

adjustments in the quick setup.

1 Turn on your TV and select the

input according to the

connection.

2 Press  to turn on the system.

3 Press FUNCTION repeatedly to

select “DVD/CD”.

The guide message

[Press ENTER to run QUICK SETUP.]

appears at the bottom of the TV

screen.

4 Press without loading a disc.

[LANGUAGE SETUP] appears on the

TV screen. Displayed items may vary

depending on country or region.

LANGUAGE SETUP

OSD

AUDIO

SUBTITLE

ENGLISH

1CHINESE

CHINESE 2

THAI

5 Press / repeatedly to select a

language, then press .

[VIDEO SETUP] appears on the TV

screen.

6 Press / repeatedly to select

the setting that matches your

TV type, then press .

After [QUICK SETUP is complete.]

appears on the TV screen, the

system is ready for playback.

To change the setting manually

See “Using the Setup Menu”

(page 32).

To quit the quick setup

Hold down SHIFT and press SETUP.

Note

The guide message appears when you

turn on the system for the first time or

after performing [RESET] (see “Returning

the setup menu settings to the default”

on page 65).

25GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Changing the display

mode

Press DISPLAY repeatedly while

the system is turned off.

Each time you press the button, the

display mode changes as follows.

Demonstration

The messages about the main

features of this system scrolls across

the display.

(MHC-M80D/MHC-M60D only)

The illumination will also turns on

during demonstration.

To turn off the illumination, press

PARTY LIGHT.

No display (Power Saving Mode)

The display is turned off to conserve

power.

(MHC-M80D/MHC-M60D only)

The illumination is also turned off.

Disc/USB Playback

Before using the USB

device

For compatible USB devices, see

“Websites for compatible devices”

(page 11).

(You can use your iPhone/iPod

with this system via BLUETOOTH

connection only.)

Basic playback

1 Press FUNCTION repeatedly to

select “DVD/CD” or “USB”.

2 Prepare the playback source.

For DVD/CD function:

Press  on the unit to open the disc

tray and load a disc with the label

facing up.

When you play back an 8 cm

disc such as a CD single, place it

on the inner circle of the tray.

Press  on the unit again to close

the disc tray.

Do not forcibly push the disc tray to

close it as this may cause a

malfunction.

26GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

For USB function:

Connect a USB device to the

(USB) port.

Note

You can use a USB adaptor (not

supplied) to connect the USB device

to the unit if the USB device cannot be

plugged into the (USB) port.

3 ( only)

Press MEDIA MODE repeatedly

to select the media type

([MUSIC]/[VIDEO]) you want.

4 Press  to start playback.

Other operations

To Do this

Stop playback Press .

Pause

playback

Press .

Resume

playback or

return to

normal

playback

Press .

Cancel the

resume point

Press  twice.

Select a track,

file, chapter or

scene

Press  or 

during playback.

Or, hold down SHIFT

and press the numeric

buttons, then

press .

(Operation might be

prohibited by disc or

USB device.)

To play from a specific file

1 Press MEDIA MODE repeatedly to

select [MUSIC] or [VIDEO].

2 Press SEARCH to display the

folder list.

3 Press / repeatedly to select

the folder you want.

4 Press to display the file list.

5 Press / repeatedly to select

the file you want, then press .

Other playback

operations

Depending on the type of disc or file,

the function may not work.

To Do this

View DVD

Press DVD/TUNER

MENU.

View folder list

or file list

Press SEARCH.

Press SEARCH again to

turn off the folder list

or file list.

Return to

folder list when

in file list

Press RETURN.

27GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

To Do this

Locate a point

quickly in fast

forward or fast

reverse (Lock

Search)

Press  or 

during playback.

Each time you press

 or , the

playback speed

changes.

Watch frame

by frame

(Slow-motion

Play)

Press , then press

or .

Each time you press

or , the playback

speed changes.

Searching a specific track

Hold down SHIFT and press the

numeric buttons to select the track

you want to play back, then press

To search using the SEARCH

button

1 Press SEARCH to display the track

list.

2 Press / repeatedly to select

the track you want to play back,

then press .

Searching a specific title/

chapter/scene/track/index

1 Press SEARCH repeatedly during

playback to select the search

mode.

2 Hold down SHIFT and press the

numeric buttons to enter the

title, chapter, scene, track, or

index number you want, then

press .

Playback starts.

Note

••For VIDEO CD with PBC playback, press

SEARCH to search the scene.

••For VIDEO CD without PBC playback,

press SEARCH to search the track and

index.

To search for a particular point

using the time code

1 Press SEARCH repeatedly during

playback to select the time

search mode.

2 Hold down SHIFT and press the

numeric buttons to enter the

time code, then press .

Example: To find a scene at 2 hours,

10 minutes, and 20 seconds, hold

down SHIFT and press 2, 1, 0, 2, 0

([2:10:20]).

If you make a mistake, hold down

SHIFT and press CLEAR to cancel the

number.

To search using the DVD menu

1 Press DVD/TUNER MENU.

2 Press / / / , or hold down

SHIFT and press the numeric

buttons, to select the title or item

you want to play back, then

press .

28GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Changing the camera angles

Press ANGLE repeatedly during

playback to select the camera

angle you want.

Selecting the subtitle setting

Press SUBTITLE repeatedly during

playback to select the subtitle

language you want or turn off the

subtitle.

Changing the language/sound

Press AUDIO repeatedly during

playback to select the audio

format or mode you want.

DVD VIDEO

You can select audio format

or language when the source

contains multiple audio formats or

multilingual audio.

When 4 digits are displayed, they

indicate a language code. See

“Language code list” (page 73)

to confirm which language the

code represents. When the same

language is displayed two or more

times, the DVD VIDEO is recorded in

multiple audio formats.

VIDEO CD/AUDIO CD/audio file

You can change the sound output.

••[STEREO]: The stereo sound.

••[1/L]/[2/R]: The monaural sound

of the left or right channel.

SUPER VIDEO CD

••[1:STEREO]: The stereo sound of

audio track 1.

••[1:1/L]/[1:2/R]: The monaural

sound of the left or right channel

of audio track 1.

••[2:STEREO]: The stereo sound of

audio track 2.

••[2:1/L]/[2:2/R]: The monaural

sound of the left or right channel

of audio track 2.

Playing a VIDEO CD with PBC

functions

You can use the PBC (Playback

Control) menu to enjoy the

interactive features of VIDEO CD

(VIDEO CD Version 2.0 and Super

VCD).

1 Press  to play a VIDEO CD

with PBC functions.

The PBC menu appears on the TV

screen.

2 Hold down SHIFT and press the

numeric buttons to select the

item number you want, then

press .

3 Continue playback according to

the instructions on the menu.

Note

PBC playback is canceled when Repeat

Play is activated.

29GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

To cancel PBC playback

1 Press  or , or hold down

SHIFT and press the numeric

buttons, to select a track when

playback is stopped.

2 Press  or .

Playback starts from the selected

track.

To return to PBC playback

Press  twice, then press .

Multi-disc resume play

This system can store playback

resume points for up to 6 discs and

resumes playback when you insert

the same disc again. If you store a

playback resume point for the 7th

disc, the resume point for the first

disc will be deleted.

To activate this function,

set [MULTI-DISC RESUME]

in [SYSTEM SETUP] to [ON]

(page35).

Note

To play back from the beginning of the

disc, press  twice, then press .

Using play mode

Playing in sequential order

(Normal Play)

When playback is stopped, press

PLAY MODE repeatedly.

 When playing a disc

••[DISC]: plays the disc.

••[FOLDER]*: plays all playable files

in the specified folder on the disc.

* Cannot be selected for AUDIO CD.

 When playing a USB device

••[ONE USB DEVICE]: plays the USB

device.

••[FOLDER]: plays all playable files

in the specified folder on the USB

device.

Note

••“FLDR” and “SHUF” light off on the

display when Normal Play is set to

[DISC] or [ONE USB DEVICE].

••“FLDR” lights up on the display when

Normal Play is set to [FOLDER].

Playing in random order

(Shuffle Play)

When playback is stopped, press

PLAY MODE repeatedly.

 When playing a disc

••[DISC (SHUFFLE)]: shuffles all audio

files on the disc.

30GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••[FOLDER (SHUFFLE)]*: shuffles all

audio files in the specified folder

on the disc.

* Cannot be selected for AUDIO CD.

 When playing a USB device

••[ONE USB DEVICE (SHUFFLE)]:

shuffles all audio files on the USB

device.

••[FOLDER (SHUFFLE)]: shuffles all

audio files in the specified folder

on the USB device.

Note

••“SHUF” lights up on the display when

Shuffle Play is set to [DISC (SHUFFLE)] or

[ONE USB DEVICE (SHUFFLE)].

••“FLDR” and “SHUF” light up on the

display when Shuffle Play is set to

[FOLDER (SHUFFLE)].

••Shuffle Play cannot be performed for

video files.

••Shuffle Play is canceled when you:

— open the disc tray.

— perform Synchronized Transfer.

— change Media Mode.

••Shuffle Play may be canceled when you

select a folder or a track to play back.

Playing repeatedly (Repeat

Play)

Press REPEAT repeatedly.

Depending on the type of disc or file,

some settings may not be available.

••[OFF]: does not play back

repeatedly.

••[ALL]: repeats all tracks or files in

the selected play mode.

••[DISC]: repeats all contents (DVD

VIDEO and VIDEO CD only).

••[TITLE]: repeats the current title

(DVD VIDEO only).

••[CHAPTER]: repeats the current

chapter (DVD VIDEO only).

••[TRACK]: repeats the current track.

••[FILE]: repeats the current video

file.

To cancel Repeat Play

Press REPEAT repeatedly to select

[OFF].

Note

••“” lights up on the display when

Repeat Play is set to [ALL] or [DISC].

••“ ” lights up on the display when

Repeat Play is set to [TITLE], [CHAPTER],

[TRACK] or [FILE].

••You cannot perform Repeat Play with

VIDEO CD during PBC playback.

••Depending on the DVD VIDEO, you

cannot perform Repeat Play.

••Repeat Play is canceled when you:

— turn off the system (DVD VIDEO and

VIDEO CD only).

— open the disc tray.

— change the function (DVD VIDEO and

VIDEO CD only).

— perform Synchronized Transfer.

— change Media Mode.

Restricting playback of

the disc (Parental

Control)

You can restrict playback of

DVD VIDEOs according to a

predetermined level. Scenes may be

skipped or replaced with different

scenes.

1 When playback is stopped, hold

down SHIFT and press SETUP.

2 Press / repeatedly to select

[SYSTEM SETUP], then press .

3 Press / repeatedly to select

[PARENTAL CONTROL], then

press .

31GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

4 Hold down SHIFT and press the

numeric buttons to enter or

re-enter your 4-digit password,

then press .

5 Press / repeatedly to select

[STANDARD], then press .

6 Press / repeatedly to select a

geographic area as the playback

limitation level, then press .

The area is selected.

When you select [OTHERS], enter

the area code for the geographic

area you want according to the

“Parental Control area code list”

(page 74) by holding down SHIFT

and press the numeric buttons.

7 Press / repeatedly to select

[LEVEL], then press .

8 Press / repeatedly to select

the level you want, then press

The lower the value, the stricter the

limitation.

To turn off the parental control

function

Set [LEVEL] to [OFF] in step 8.

To play back a disc for which the

parental control is set

1 Load the disc and press .

The display for entering your

password appears on the TV screen.

2 Hold down SHIFT and press the

numeric buttons to enter or

re-enter your 4-digit password,

then press .

The system starts playback.

If you forget your password

Remove the disc and repeat steps

1 to 3 of “Restricting playback of

the disc (Parental Control)” (page

30). Hold down SHIFT and press

the numeric buttons to enter a

password “199703”, then press .

Follow the on-screen instructions

and enter a new 4-digit password.

Then, reload the disc and press .

You need to enter your new

password again.

Viewing information of

a disc and USB device

Information on the TV screen

(MHC-M80D/MHC-M60D only)

Hold down SHIFT and press

DISPLAY repeatedly during

playback.

(MHC-M40D only)

Press DISPLAY repeatedly

during playback.

 Playback information

Playing time and remaining time

 Bit rate

 Media type

 Playback status

 Title*1/track/file name*2

32GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

 Album*1/folder name*2/

chapter/index number

 Artist name*1*2

Appears when playing an audio

file.

*1 If an audio file has an ID3 tag, the

system will display an album name/

title name/artist name from the ID3 tag

information. The system can support

ID3 ver 1.0/1.1/2.2/2.3.

*2 If the name contains characters which

cannot be displayed, those characters

will be displayed as “_”.

Note

••Depending on the source being played,

— some information may not be

displayed.

— some characters cannot be

displayed.

••Depending on the play mode, the

information displayed may be different.

Displaying the audio format

information in DVD VIDEOs and

video files

Press AUDIO during playback.

Information on the display

Press DISPLAY repeatedly when

the system is turned on.

You can view the information as

follows:

•—playing time/remaining time of

track, title, chapter

•—scene number

•—file name, folder name

•—title, artist and album information

Note

••The disc name or track name may

not be displayed depending on the

characters.

••Playing time of audio files and video

files may not be displayed correctly.

••The elapsed playing time for an audio

file encoded using a VBR (variable bit

rate) is not displayed correctly.

Using the Setup Menu

You can make various adjustments

to items such as picture and sound.

Displayed items vary depending on

the country or region.

Note

Playback settings stored in the disc take

priority over the setup menu settings.

Therefore, some of the setup menu

settings may not be performed.

1 When playback is stopped in

DVD/CD or USB function, hold

down SHIFT and press SETUP.

The setup menu appears on the TV

screen.

2 Press / repeatedly to select

[LANGUAGE SETUP],

[VIDEO SETUP], [AUDIO SETUP],

[SYSTEM SETUP] or

[HDMI SETUP], then press .

3 Press / repeatedly to select

the item you want, then press

4 Press / repeatedly to select

the setting you want, then press

The setting is selected and setup is

completed.

To exit the menu

Hold down SHIFT and press SETUP.

33GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Setting the language

– [LANGUAGE SETUP]

[OSD]

Sets the language of the on-screen

display.

[MENU]

Sets the language for the DVD

menu.

[AUDIO]

Switches the language of the sound

track.

When you select [ORIGINAL], the

language given priority in the disc is

selected.

[SUBTITLE]

Switches the language of the

subtitle recorded in the DVD VIDEO.

When you select [AUDIO FOLLOW],

the language for the subtitles

changes according to the language

you selected for the sound track.

Note

If you select [OTHERS] in [MENU],

[AUDIO], and [SUBTITLE], enter a

language code from the “Language

code list” (page 73) using the numeric

buttons.

Setting the TV screen

– [VIDEO SETUP]

[TV TYPE]

[16:9]: Selects this when you

connect a wide-screen TV or a TV

with a wide-mode function.

[4:3 LETTER BOX]: Selects this

when you connect a 4:3 screen TV

that does not have a wide-mode

function. This setting displays a wide

picture with black bands on the top

and bottom.

[4:3 PAN SCAN]: Selects this

when you connect a 4:3 screen TV

that does not have a wide-mode

function. This setting displays a full-

height picture on the entire screen,

with trimmed sides.

[4:3 OUTPUT]

[FULL]: Selects this when you

connect a TV with a wide-mode

function. Displays a 4:3 screen

picture in 16:9 aspect ratio even on a

wide-screen TV.

34GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

[NORMAL]: Changes the picture

size to fit the screen size with the

original picture aspect ratio. This

setting displays black bands on the

left and right side if you display a 4:3

screen picture.

[COLOR SYSTEM(VIDEO CD)]

(Except for Latin American,

European, and Russian models)

Sets the color system (PAL or NTSC).

[AUTO]: Outputs the video signal

according to the color system of the

disc. Select this setting if your TV

uses a DUAL system.

[PAL]: Changes the video signal of

an NTSC disc and output it in PAL

system.

[NTSC]: Changes the video signal

of a PAL disc and output it in NTSC

system.

For details, see “Changing the color

system” (page 24).

[PAUSE MODE]

[AUTO]: The picture, including

subjects that move dynamically, is

output with no jitter. Normally select

this setting.

[FRAME]: The picture, including

subjects that do not move

dynamically, is output in high

resolution.

Setting the audio options

– [AUDIO SETUP]

[AUDIO DRC]

(Dynamic Range Compression)

Useful for watching movies at low

volume late at night.

[OFF]: Off.

[STANDARD]: The dynamic range

is compressed as intended by the

recording engineer.

[TRACK SELECTION]

Gives priority to the sound track

which contains the highest number

of channels when you play back a

DVD VIDEO on which multiple audio

formats (PCM, MPEG audio, or Dolby

Digital) are recorded.

[OFF]: No priority given.

[AUTO]: Priority given.

[A/V SYNC]

(Video files only)

[OFF]: Does not adjust.

[ON]: Adjusts the delay between

picture and sound when the sound

does not synchronize with the

displayed picture.

[DOWNMIX]

Selects the audio output signal for

playing a multi-channel audio.

[NORMAL]: Outputs multi-channel

audio into a 2-channel stereo signal.

[DOLBY SURROUND]: Outputs

multi-channel audio into a

2-channel surround signal.

35GB

Disc/USB Playback

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Setting the system

– [SYSTEM SETUP]

[SCREEN SAVER]

The screen saver will help prevent

your display device from becoming

damaged (ghosting). Press  +/– to

exit the screen saver.

[ON]: The screen saver image

appears if you do not operate the

system for about 15 minutes.

[OFF]: Turns off the function. The

screen saver image does not appear.

[BACKGROUND]

Selects the background color or

picture to be displayed on the TV

screen.

[JACKET PICTURE]: The jacket

picture (still picture) recorded on the

disc appears in the background.

[GRAPHICS]: A preset picture

stored in the system appears in the

background.

[BLUE]: The background color is

blue.

[BLACK]: The background color is

black.

[PARENTAL CONTROL]

Sets the playback restrictions. For

details, see “Restricting playback

of the disc (Parental Control)”

(page30).

[MULTI-DISC RESUME]

[ON]: Stores the resume playback

point in the memory for up to

6discs.

[OFF]: Playback starts at the resume

playback point only for the current

disc in the system.

[RESET]

Returns the setup menu settings to

the default settings. For details, see

“Returning the setup menu settings

to the default” (page 65).

Setting the HDMI options

– [HDMI SETUP]

[HDMI RESOLUTION]

Selects the TV output resolution

when the TV is connected via HDMI

cable.

[AUTO(1920×1080p)]: Outputs

video signals according to the

resolution of the TV.

[1920×1080i]/[1280×720p]/

[720×480p]*1/[720×480/576p]*2:

Outputs video signals according to

the selected resolution setting.

*1 For Latin American models only.

*2 For other models.

[YCBCR/RGB(HDMI)]

[YCBCR]: Outputs YCBCR video

signals.

[RGB]: Outputs RGB video signals.

[AUDIO(HDMI)]

[AUTO]: Outputs audio signals in

original format from HDMI OUT (TV)

ARC jack.

[PCM]: Outputs 2-channel Linear

PCM signals from HDMI OUT (TV)

ARC jack.

[CONTROL FOR HDMI]

[ON]: The Control for HDMI function

is enabled. You can operate

mutually between system and TV

connected with an HDMI cable.

[OFF]: Off.

36GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

[AUDIO RETURN CHANNEL]

Set this function when the system

is connected to a TV’s HDMI IN jack

that is compatible with Audio Return

Channel. This function is available

when you set [CONTROL FOR HDMI]

to [ON].

[ON]: You can listen to TV sound

from the speakers of the system.

[OFF]: Off.

[STANDBY LINKED TO TV]

This function is available when you

set [CONTROL FOR HDMI] to [ON].

[AUTO]: When you turn off the TV,

the system turns off automatically in

the following conditions:

•—while playing video in DVD/CD or

USB function

•—when the audio playback is

stopped in DVD/CD or USB

function

•—when TV function is selected

[ON]: The system turns off

automatically when you turn off the

TV regardless of the function.

[OFF]: The system does not turn off

when you turn off the TV.

USB Transfer

Before using the USB

device

For compatible USB devices, see

“Websites for compatible devices”

(page 11).

(You can use your iPhone/iPod

with this system via BLUETOOTH

connection only.)

Transferring music

You can transfer music from a

disc (AUDIO CD or MP3 disc only)

to a USB device connected to the

(USB) port.

The audio format of files transferred

by this system is MP3.

Note

••Do not remove the USB device during

transfer or erase operations. Doing so

may corrupt the data on the USB device

or damage the USB device itself.

••MP3 files are transferred with the same

bit rate as the original files.

••When transferring from AUDIO CD,

you may select the bit rate before

transferring.

••USB transfer and erase operations are

prohibited when the disc tray is opened.

Note on copyright-protected content

The transferred music is limited to private

use only. Use of the music beyond this

limit requires permission of the copyright

holders.

To select the bit rate

You can select a higher bit rate to

transfer music with better quality.

1 Press OPTIONS.

37GB

USB Transfer

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

2 Press / repeatedly to select

“BIT RATE”, then press .

3 Press / repeatedly to select

the bit rate you want, then press

••“128 KBPS”: encoded MP3 files

have smaller file size and lower

audio quality.

••“256 KBPS”: encoded MP3 files

have bigger file size but higher

audio quality.

To exit the options menu, press

OPTIONS.

Transferring music from a disc

You can transfer music to a USB

device connected to (USB) port

as follows:

••Synchronized Transfer: Transfer

all tracks or MP3 files from a disc

to USB.

••REC1 Transfer: Transfer a single

track or MP3 file during playback.

1 Connect a transferable USB

device to the (USB) port on

the unit.

Note

You can use a USB adaptor (not

supplied) to connect the USB device

to the unit if the USB device cannot be

plugged into the (USB) port.

2 Press FUNCTION repeatedly to

select “DVD/CD”, then load a

disc.

3 Prepare the sound source.

Synchronized Transfer:

If the system starts playback

automatically, press  twice to stop

the playback fully.

When playback is stopped, press

PLAY MODE repeatedly to select the

play mode you want.

Note

If you start transferring in Shuffle Play

or Repeat Play, the selected play mode

changes to Normal Play automatically.

REC1 Transfer:

Select the track or MP3 file you want

to transfer, then start playback.

4 Press REC TO USB.

“PUSH ENTER” appears on the

display.

5 Press .

The transfer starts, then “DO NOT

REMOVE” appears on the display.

Do not remove the USB device until

the transfer is complete.

When the transfer is complete, the

system performs as follows:

Synchronized Transfer:

The disc stops automatically.

REC1 Transfer:

The disc continues to play the next

track or file.

To stop transfer

Press .

Notes on transfer

••You cannot transfer MP3 files on a UDF

(Universal Disk Format) formatted disc

to the USB device.

••While transferring, no sound is output.

••CD-TEXT information is not transferred

to the created MP3 files.

38GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••The transfer stops automatically if:

— the USB device runs out of space

during transfer.

— the number of audio files or folders

on the USB device reaches the limit

that the system can recognize.

••If a folder or file that you are trying

to transfer already exists on the

USB device with the same name, a

sequential number is added after the

name without overwriting the original

folder or file.

••You cannot perform the following

operations during transfer:

— Eject the disc.

— Select another track or file.

— Pause playback or find a point in the

track or file.

— Change the function.

••When transferring music to a

WALKMAN® using “Media Manager for

WALKMAN”, be sure to transfer in MP3

format.

••When connecting a WALKMAN® to

the system, be sure to connect after

the display “Creating Library” or

“Creating Database” on the WALKMAN®

has disappeared.

Folder and file generation

rules

Maximum number of MP3 files

that can be generated

••298 folders

••650 files in a folder

••650 files in REC1-CD or REC1-MP3

folder.

These numbers may vary depending

on the file or folder configuration.

When transferring to a USB device,

a “MUSIC” folder is created directly

below “ROOT”. Folders and files are

generated within this “MUSIC” folder

according to the transfer method

and source as follows:

Synchronized Transfer

 When transferring all tracks

from an AUDIO CD

Folder name: “CDDA0001”*

File name: “TRACK001”*

 When transferring MP3 files

from a disc

Folder name: Same as the source

File name: Same as the source

REC1 Transfer

 When transferring a track from

an AUDIO CD

Folder name: “REC1-CD”

File name: “TRACK001”*

 When transferring an MP3 file

from a disc

Folder name: “REC1-MP3”

File name: Same as the source

* Folder and file numbers are assigned

serially thereafter.

Erasing audio files or folders

on the USB device

1 Press FUNCTION repeatedly to

select “USB”.

2 Press MEDIA MODE repeatedly

to select [MUSIC].

3 When playback is stopped,

press OPTIONS.

4 Press / repeatedly to select

“ERASE”, then press .

The folder list is displayed on the TV

screen.

39GB

Tuner

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

5 Press / repeatedly to select a

folder, then press .

The file list is displayed on the TV

screen.

6 Press / repeatedly to select

an audio file you want to erase,

then press .

If you want to erase all the audio

files in the folder, select

[ALL TRACKS] on the list.

“FOLDER ERASE” or “TRACK ERASE”

and “PUSH ENTER” appear on the

display.

To cancel erase operations, press .

7 Press .

“COMPLETE” appears on the display.

To exit the options menu, press

OPTIONS.

Note

••You can erase the supported audio file,

MP4 format file, and 3GP format file

only.

••You cannot erase audio files or folders

when Shuffle Play has been selected.

Set the play mode to Normal Play

before erasing.

••Erase operation is prohibited when the

disc tray is opened.

Tuner

Listening to the radio

1 Press FUNCTION repeatedly to

select “TUNER FM”.

2 Tune to a station.

For automatic scanning:

Hold down TUNING+/– until the

frequency begins to change on the

display.

Scanning stops automatically when

a station is tuned in. “ST” (for FM

stereo programs only) lights up on

the display.

If scanning does not stop, press 

to stop scanning. Then, perform

manual tuning (below).

For manual tuning:

Press TUNING+/– repeatedly to tune

to the station you want.

Note

When you tune to an FM station that

provides RDS services, information such

as the service name or station name is

provided by broadcasts. You can check

the RDS information by pressing DISPLAY

repeatedly.

Hint

To reduce static noise on a weak FM

stereo station, press FM MODE repeatedly

until “ST” disappears from the display. You

will lose the stereo effect, but reception

will improve.

40GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Presetting radio stations

You can store up to 20 FM stations

as your favorite stations.

1 Tune to the station you want.

2 Press DVD/TUNER MENU.

3 Press / repeatedly to select

the preset number you want,

then press .

“COMPLETE” appears on the display

and the station is stored.

If another station is already

assigned to the selected preset

number, that station is replaced by

the new one.

To listen to the preset station

Press PRESET+/– repeatedly to

select the preset number you want.

Alternatively, hold down SHIFT and

press the numeric buttons, then

press .

BLUETOOTH Connection

About the BLUETOOTH

wireless technology

BLUETOOTH wireless technology is

a short-range wireless technology

that enables wireless data

communication between digital

devices.

Supported BLUETOOTH version,

profiles and codecs

For details, see “BLUETOOTH

section” (page 70).

Compatible BLUETOOTH devices

For details, see “Websites for

compatible devices” (page 11).

About the BLUETOOTH

indicator

The BLUETOOTH indicator on the

unit lights up or flashes in blue to

show the BLUETOOTH status.

System status Indicator status

BLUETOOTH

standby

Flashes slowly

BLUETOOTH

pairing

Flashes quickly

BLUETOOTH

connection is

established

Lights up

41GB

BLUETOOTH Connection

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Pairing this system

with a BLUETOOTH

device

Pairing is an operation where

BLUETOOTH devices register with

each other beforehand. Once a

pairing operation is performed, it

does not need to be performed

again.

1 Place the BLUETOOTH device

within 1meter from the unit.

2 Press FUNCTION repeatedly to

select “BLUETOOTH”.

Hint

••When there is no pairing information

on the system (for example, when

you use the BLUETOOTH function

for the first time after purchase),

“PAIRING” flashes on the display and

the system enters the pairing mode.

Proceed to step 4.

••If the system is connected to

a BLUETOOTH device, press

BLUETOOTH on the unit to

disconnect the BLUETOOTH device.

3 Hold down PAIRING on the

unit for 2seconds or more.

“PAIRING” flashes on the display.

4 Turn on the BLUETOOTH

function on the BLUETOOTH

device and perform the pairing

procedure.

For details, refer to the operating

instructions of your BLUETOOTH

device.

5 Select the system’s name (for

example, “MHC-M80D”) on the

display of the BLUETOOTH

device.

Perform this step within 5 minutes,

otherwise pairing will be canceled.

In this case, repeat from step 3.

Note

If passkey is required on the

BLUETOOTH device, enter “0000”.

“Passkey” may be called “Passcode”,

“PIN code”, “PIN number”, or

“Password”.

6 Establish connection with the

BLUETOOTH device.

When pairing is completed and the

BLUETOOTH connection is

established, BLUETOOTH device

name appears on the display.

Depending on the BLUETOOTH

device, connection may start

automatically after pairing is

completed.

You can check the BLUETOOTH

device address by pressing DISPLAY

repeatedly.

Note

••You can pair up to 8 BLUETOOTH

devices. If the 9th BLUETOOTH device is

paired, the oldest paired device will be

deleted.

••If you want to pair with another

BLUETOOTH device, repeat steps 1 to 6.

To cancel the pairing operation

Hold down PAIRING on the unit for

2seconds or more until “BT AUDIO”

appears on the display.

To erase pairing information

You can erase all pairing information

by resetting the system. See

“Resetting the system” (page 65).

42GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Note

After you reset the system, it may not be

able to connect with your iPhone/iPod. In

this case, delete the pairing information

of the system on your iPhone/iPod, and

then perform the pairing procedure

again.

Listening to music on a

BLUETOOTH device

You can listen to music on the

BLUETOOTH device and control the

playback using the buttons on the

unit or the remote control.

Check the following before playing

music:

•—The BLUETOOTH function of the

BLUETOOTH device is turned on.

•—Pairing has been completed

(page41).

Once the system and the

BLUETOOTH device are connected,

you can control playback by

pressing , , , / and

/.

1 Press BLUETOOTH on the unit to

select the BLUETOOTH function.

“BLUETOOTH” appears on the

display.

2 Establish connection with the

BLUETOOTH device.

Press BLUETOOTH on the unit to

connect to the last connected

BLUETOOTH device.

Perform the BLUETOOTH connection

from the BLUETOOTH device if the

device is not connected.

Once the connection is established,

the BLUETOOTH device name

appears on the display.

3 Press  to start playback.

Depending on the BLUETOOTH

device,

— you may need to press  twice.

— you may need to start playing an

audio source on the BLUETOOTH

device.

4 Adjust the volume.

Adjust the volume of the

BLUETOOTH device first. If the

volume level is still too low, adjust

the volume level on the system.

Note

When the system is not connected to

any BLUETOOTH device, the system

will connect to the last connected

BLUETOOTH device automatically when

you press BLUETOOTH or  on the unit.

To terminate the BLUETOOTH

connection

Press BLUETOOTH on the unit. “BT

AUDIO” appears on the display.

Depending on the BLUETOOTH

device, the BLUETOOTH connection

may be terminated automatically

when you stop playback.

Connecting this system

with multiple

BLUETOOTH devices

(Multi-device

connection)

You can connect up to three

BLUETOOTH devices to the system

at the same time with A2DP/AVRCP

connection.

43GB

BLUETOOTH Connection

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Before pairing the next BLUETOOTH

device, be sure that the BLUETOOTH

function on the system is turned on

and the first BLUETOOTH device is

connected to the system.

To pair with the second or third

device

Repeat steps 1 to 6 of “Pairing this

system with a BLUETOOTH device”

(page 41).

To switch the playback source

Start playback on another

connected BLUETOOTH device while

the current device is playing music.

The system will output the sound

from the latest device.

Note

••Operations may vary depending on

the BLUETOOTH device. A BLUETOOTH

device may not be connected

depending on the combination of

the devices. For details, refer to the

operating instructions of the device.

••If you try to connect the 4th BLUETOOTH

device, the oldest playback device will

be disconnected.

••Depending on the BLUETOOTH device,

you may not be able to make three

BLUETOOTH connections at the same

time.

••You cannot establish the multi-device

connection when using the Wireless

Party Chain function.

To disconnect any BLUETOOTH

device from the multi-device

connection

Terminate the BLUETOOTH

connection from the BLUETOOTH

device which you want to

disconnect.

To disconnect all BLUETOOTH

devices from the multi-device

connection

Press BLUETOOTH on the unit.

Setting the BLUETOOTH

audio codecs

You can enable AAC, LDAC or SBC

codec reception from BLUETOOTH

device. AAC/LDAC can be selected

only when the BLUETOOTH device

supports AAC/LDAC.

1 Press OPTIONS.

2 Press / repeatedly to select

“BT CODEC”, then press .

3 Press / repeatedly to select

the setting, then press .

••“AUTO”: Enable reception in AAC

or LDAC codec format.

••“SBC”: Receive in SBC codec

format.

To exit the options menu, press

OPTIONS.

Note

••You can enjoy high quality sound if AAC

or LDAC is selected. If you cannot listen

to AAC or LDAC sound from your device

or the sound is interrupted, select “SBC”.

••If you change this setting while the

system is connected to a BLUETOOTH

device, the BLUETOOTH device will

be disconnected. To connect to the

BLUETOOTH device, perform the

BLUETOOTH connection again.

44GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Hint

LDAC is an audio coding technology

developed by Sony that enables the

transmission of High-Resolution (Hi-Res)

Audio content, even over a BLUETOOTH

connection. Unlike other BLUETOOTH

compatible coding technologies

such as SBC, it operates without any

down-conversion of the Hi-Res Audio

content*1, and allows approximately

three times more data*2 than those

other technologies to be transmitted

over a BLUETOOTH wireless network

with unprecedented sound quality, by

means of efficient coding and optimized

packetization.

*1 Excluding DSD format contents.

*2 In comparison with SBC (Subband

Coding) when the bitrate of 990 kbps

(96/48 kHz) or 909 kbps (88.2/44.1 kHz)

is selected.

Setting the BLUETOOTH

standby mode

The BLUETOOTH standby mode

enables the system to turn on

automatically when you establish

a BLUETOOTH connection from a

BLUETOOTH device.

1 Press OPTIONS.

2 Press / repeatedly to select

“BT STBY”, then press .

3 Press / repeatedly to select

the setting, then press .

••“ON”: The system turns on

automatically even when the

system is in standby mode.

••“OFF”: Turns off this function.

To exit the options menu, press

OPTIONS.

Turning on or off the

BLUETOOTH signal

You can connect to the system

from a paired BLUETOOTH device

in all functions when the system’s

BLUETOOTH signal is set to on. The

BLUETOOTH signal is turned on by

default.

Hold down VOCAL FADER and +

on the unit for about 3seconds.

“BT ON” or “BT OFF” appears on the

display.

Note

••You cannot perform the following

operations when BLUETOOTH signal is

set to off:

— Pair and/or connect with BLUETOOTH

device

— Use “Sony | Music Center”

— Change the BLUETOOTH audio

codecs

••If the BLUETOOTH standby mode is set

to on, the BLUETOOTH signal will be set

to on automatically.

45GB

BLUETOOTH Connection

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Controlling the

system using a

smartphone or

tablet (Sony |

Music Center)

“Sony | Music Center” is a dedicated

app for operating “Sony | Music

Center”-compatible audio devices

manufactured by Sony using a

smartphone or tablet. Search for

“Sony | Music Center” on Google

Play or App Store and download it

using your smartphone or tablet.

“Sony | Music Center” allows you to:

•—change the function of the system,

control the playback of the disc/

USB device and tune to an FM

station.

•—browse the music content of disc/

USB device.

•—view the information of disc/USB

device such as playing time and

title.

•—adjust the volume and change

sound setting.

•—control multiple systems when

using the Wireless Party Chain

function.

1 Search for “Sony | Music Center”

or scan the two-dimensional

code below.

2 Download “Sony | Music

Center” app on your device.

3 Connect the system and device

via BLUETOOTH connection

(page 41).

4 Launch “Sony | Music Center”

and follow the on-screen

instructions.

Note

••We recommend you to use the latest

“Sony | Music Center” version.

••If the “Sony | Music Center” application

does not work properly, press

BLUETOOTH on the unit to terminate the

BLUETOOTH connection, then perform

the BLUETOOTH connection again

so that the BLUETOOTH connection

functions normally.

••Available operations via “Sony | Music

Center” may differ depending on the

audio devices.

••For more details on “Sony | Music

Center”, refer to the following URL.

http://info.vssupport.sony.net/help/

••Specifications and display design of

“Sony | Music Center” are subject to

change without notice.

46GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Getting frenzied

parties with the

“Fiestable” app

You can control the party features

of Sony’s Home Audio System with

intuitive and fancy user interface

with the “Fiestable” app. “Fiestable”

allows you to control features

such as DJ Effect, illumination and

Karaoke. You can also enjoy the

“Motion Control” function where you

can operate certain features on this

system by shaking your BLUETOOTH

device in different directions.

“Fiestable” is a plug-in application of

“Sony | Music Center”.

1 Search and download “Sony |

Music Center” app on your

device (page 45).

2 Search and download

“Fiestable” app on Google Play

or App Store using your device.

3 Connect the system and device

via BLUETOOTH connection

(page 41).

4 Launch “Sony | Music Center”

and touch the “Fiestable” icon.

Note

For more details on “Sony | Music Center”,

refer to the following URL.

http://info.vssupport.sony.net/help/

Achieving and sharing

a Party People ranking

and getting bonus

features with Party

King

The system has a unique feature

that can automatically record your

system usage.

Based on your usage, the system will

rank you with different Party People

ranking according to predefined

criteria. The frequent you use the

system, the higher the ranking you

will achieve.

Once you have achieved a certain

Party People ranking, you can share

your achievement through social

media.

The system will also award your

achievements with bonus features.

Note

To use this feature, make sure

“Sony | Music Center” app (page 45)

and “Fiestable” app (page 46) are

already installed to your device.

1 Connect the system and device

via BLUETOOTH connection

(page 41).

2 Launch “Sony | Music Center”

and touch the “Fiestable” icon.

You can check your current ranking,

bonus features and also find out

how to achieve next ranking.

47GB

Sound Adjustment

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Sound Adjustment

Adjusting the sound

To Do this

Reinforce bass

sound and create

more powerful

sound (MEGA

BASS)

Press MEGA BASS

repeatedly to select

“BASS ON”.

To cancel, press

MEGA BASS

repeatedly to select

“BASS OFF”.

Reproduce the

sound effect of a

party hall (Fiesta)

Press FIESTA on the

unit. Alternatively,

press SOUND FIELD

+/– (or SOUND

FIELD on the unit)

repeatedly to select

“FIESTA”. To cancel,

press FIESTA again.

Select a sound

field

Press SOUND FIELD

+/– (or SOUND

FIELD on the unit)

repeatedly to select

the sound field you

want. To cancel,

press SOUND FIELD

+/– (or SOUND

FIELD on the unit)

repeatedly to select

“FLAT”.

Adjusting the

subwoofer level

(MHC-M80D only)

1 Press OPTIONS.

2 Press / repeatedly to select

“S-WOOFER”, then press .

3 Press / repeatedly to select

the subwoofer level, then press

To exit the options menu, press

OPTIONS.

Selecting the Virtual

Football mode

You can experience the feeling of

being in the stadium when watching

a football match broadcast.

Note that you can only select Virtual

Football mode during AUDIO IN and

TV functions.

Press SOUND FIELD +/– repeatedly

while watching a football match

broadcast.

(MHC-M40D only)

Alternatively, press FOOTBALL on

the unit.

••“ON NARRATION”: You can enjoy an

immersive feeling of being in a

football stadium through enhanced

stadium cheers.

••“OFF NARRATION”: You can enjoy a

more immersive feeling of being in a

football stadium by minimizing the

volume level of narration in addition

to the enhancement of cheers.

To cancel the Virtual Football

mode

Press SOUND FIELD +/– repeatedly

to select “FLAT”.

Note

••We recommend that you select the

Virtual Football mode when watching a

football match broadcast.

••If you hear unnatural sounds in the

content when “OFF NARRATION”

is selected, “ON NARRATION” is

recommended.

48GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••This feature does not support monaural

sound.

Creating your own

sound effect

You can raise or lower the levels

of specific frequency bands, then

store the setting in the memory as

“CUSTOM EQ”.

1 Press OPTIONS.

2 Press / repeatedly to select

“CUSTOM EQ”, then press .

3 Press / repeatedly to adjust

the equalizer level or surround

setting, then press .

4 Repeat step 3 to adjust the level

of other frequency bands and

surround effect.

To exit the options menu, press

OPTIONS.

To select the custom equalizer

setting

Press SOUND FIELD +/– repeatedly

to select “CUSTOM EQ”.

Creating a party

atmosphere (DJ Effect)

Use the buttons on the unit to

perform this operation.

1 Press the following button to

select the effect type.

••FLANGER: Creates a deep flanging

effect that is similar to the roar of

a jet plane.

••ISOLATOR: Isolates a specific

frequency band by adjusting the

other frequency bands. For

example, when you want to focus

on vocals.

••SAMPLER: Provides a series of

special sound effects.

2 Change the sound effect.

For FLANGER and ISOLATOR:

Turn the VOLUME/DJ CONTROL

knob to adjust the effect level.

For SAMPLER:

Press SAMPLER repeatedly to select

the sampler mode you want, then

press S1, S2, S3 or S4 to output the

sampler sound.

To output other sampler sound

continuously, turn the VOLUME/DJ

CONTROL knob.

To adjust the level of the

sampler sound

1 Press OPTIONS on the remote

control.

2 Press / on the remote control

repeatedly to select “SAMPLER”,

then press .

3 Press / on the remote control

repeatedly to adjust the sampler

sound level, then press .

49GB

Other Operations

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

To turn off the effect

••Press DJ OFF.

••Press the selected effect button

again (for FLANGER and ISOLATOR

only).

Note

••The DJ Effect is automatically turned off

when you:

— turn off the system.

— change the function.

— change sound effect.

— use the Vocal Fader.

— use the Voice Changer.

— change the key (Key Control).

— press DJ OFF on the unit.

••If you activate the DJ Effect during

transferring, the sound effect will not be

transferred onto the USB device.

••You cannot use VOLUME/DJ CONTROL

knob on the unit to adjust the volume

when the DJ Effect is activated.

Press  +/– on the remote control to

adjust the volume.

Other Operations

Using the Control for

HDMI function

Connecting a TV compatible with

the Control for HDMI function* by

HDMI cable (High Speed HDMI Cable

with Ethernet, not supplied) enables

you to easily operate the device by a

TV remote control.

The following functions can be used

with the Control for HDMI function.

••System Power Off function

••System Audio Control function

••Audio Return Channel

••One-Touch Play function

••Remote Easy Control

••Language Follow

* Control for HDMI is a standard used

by CEC (Consumer Electronics Control)

for allowing HDMI (High-Definition

Multimedia Interface) devices to control

each other.

Note

These functions may work with devices

other than those manufactured by Sony,

but operation is not guaranteed.

Preparing to use the Control for

HDMI function

Hold down SHIFT and press

SETUP, then set [HDMI SETUP]–

[CONTROL FOR HDMI] on the system

to [ON] (page35). The default

setting is [ON].

Enable the Control for HDMI function

settings for the TV connected to the

system.

50GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Hint

If you enable the Control for HDMI

(“BRAVIA” sync) function when using a

TV manufactured by Sony, the Control

for HDMI function of the system is also

enabled automatically. When settings are

completed, “COMPLETE” appears on the

display.

System Power Off function

When you turn off the TV, the system

will turn off automatically.

Hold down SHIFT and press

SETUP, then set [HDMI SETUP]

– [STANDBY LINKED TO TV] on

the system to [ON] or [AUTO]

(page36). The default setting is

[AUTO].

Note

The connected device may not turn off

depending on the status of the device.

System Audio Control function

If you turn on the system while you

are watching the TV, the TV sound

will be output from the speakers

of the system. The volume of the

system can be adjusted using the

TV’s remote control.

If the TV sound was output from the

speakers of the system the previous

time you watched the TV, the system

will be turned on automatically

when you turn on the TV again.

Operations can also be made by the

TV’s menu. For details, refer to the

operating instructions of your TV.

Note

••The system’s volume level is displayed

on the TV screen depending on the TV.

It may differ from the volume level on

the display.

••Depending on the settings of the TV,

the System Audio Control function may

not be available. For details, refer to the

operating instructions of your TV.

Audio Return Channel

If the system is connected to a TV’s

HDMI IN jack compatible with Audio

Return Channel, you can listen to

TV sound from the speakers of the

system without connecting an audio

cable (not supplied).

Hold down SHIFT and press

SETUP, then set [HDMI SETUP] –

[AUDIO RETURN CHANNEL] to [ON]

(page36). The default setting is

[ON].

Note

If the TV is not compatible with Audio

Return Channel, an audio cable (not

supplied) needs to be connected

(page23).

One-Touch Play function

When you press  in DVD/CD or

USB function, the TV is turned on

automatically. The TV’s input is

switched to the HDMI input which

the system is connected.

Note

Depending on the TV, the beginning part

of content being played may not play

correctly.

Remote Easy Control

You can select the system by the

SYNC MENU button on the TV

remote control and operate the

system.

This function can be used if the TV

supports the link menu. For details,

refer to the operating instructions of

your TV.

Note

••In the TV’s link menu, the system is

recognized by the TV as “Player”.

••Some operations may not be available

with some TVs.

51GB

Other Operations

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Language Follow

When you change the language

for the on-screen display of the

TV, the system’s on-screen display

language is also changed.

Enjoying wireless

playback using

multiple systems

(Wireless Party Chain

function)

You can connect multiple audio

systems in a chain via BLUETOOTH

connection if all the systems are

equipped with the Wireless Party

Chain function. This function allows

you to create a more exciting party

environment and to produce higher

sound output without a cable

connection.

Note that you can only play back

audio source from a BLUETOOTH

device.

The first system in the chain to be

activated becomes the Party Host

and shares the music. Other systems

become Party Guests and play the

same music as that being played by

the Party Host.

Setting up and enjoying the

Wireless Party Chain

Example: setting the MHC-M80D as

the first system (Party Host)

1 Turn on all the systems.

2 Set the first system as the Party

Host.

 Press BLUETOOTH on the unit to

select the BLUETOOTH function.

 Connect the BLUETOOTH device

to the system via BLUETOOTH

connection.

 Press W.PARTY CHAIN on the

unit.

“CHAINING” appears on the

display. The system enter

Wireless Party Chain setup

mode.

When the system entered

Wireless Party Chain setup

mode, connection to the

BLUETOOTH device is

terminated automatically.

3 Set the second system as a Party

Guest.

 Press BLUETOOTH on the

second system to select the

BLUETOOTH function.

 Press W.PARTY CHAIN on the

second system.

The second system become a

Party Guest.

“P.CHAIN” lights up on the

display.

Note

The Wireless Party Chain function is

canceled in the following situations.

— There is no operation within

1minute after the Party Host is set

in step 2.

— W.PARTY CHAIN is pressed again

on the Party Host before step 3 is

completed.

4 Set the third or more systems as

Party Guests.

Repeat step 3.

52GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Note

Connect the third or later systems

within 30 seconds of connecting the

previous system. “P. CHAIN” flashes

on the display of the Party Host within

30seconds. After 30 seconds, the

system cannot be connected.

5 Wait 30 seconds after the last

Party Guest is connected.

“P.CHAIN” will stop flashing on the

display of the Party Host and the

BLUETOOTH device will reconnect to

the Party Host.

6 Start playback on the connected

BLUETOOTH device.

7 Adjust the volume.

When the volume on the Party Host

is adjusted, the volume on Party

Guests are also adjusted. If you

want to adjust the volume on a

particular Party Guest, adjust the

volume on that Party Guest.

Note

••You cannot select another system as

the new Party Host while the Wireless

Party Chain is activated.

••When you use the microphone or play

the guitar on Party Host, the sound will

not be output from Party Guests.

••For detailed operation on other

systems, refer to the operating

instructions of the systems.

Hint

To add new Party Guests after Wireless

Party Chain has already been established,

hold down W.PARTY CHAIN on the Party

Host and repeat the procedure from

step 3.

To deactivate the Wireless Party

Chain

Press W.PARTY CHAIN on Party Host.

Note

When you change the function or turn off

the Party Host, the Wireless Party Chain

will be deactivated.

To make a Party Guest leave the

Wireless Party Chain

Press W.PARTY CHAIN on the Party

Guest which want to leave. In this

case, the rest of the Wireless Party

Chain will remain active.

Note

••When you change the function or turn

off a particular Party Guest, that Party

Guest will leave the Wireless Party

Chain connection.

••Sleep Timer and Auto Standby functions

are not available on Party Guests.

Settings synchronization during

Wireless Party Chain

When the Wireless Party Chain

is established, the following

conditions will be applied:

••Mega Bass, Party Light (MHC-

M80D only) and Speaker Light

(MHC-M80D/MHC-M60D only)

settings on the Party Guests are

synchronized with the Party Host. If

these settings are changed on the

Party Host, the settings on Party

Guests are also changed.

••DJ Effect and Karaoke settings such

as Vocal Fader and Key Control are

turned off on both Party Host and

Party Guests.

••Sound field settings return to

default on both Party Host and

Party Guests.

••When the Party Host is turned off,

the Party Guests are also turned

off.

53GB

Other Operations

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Singing along: Karaoke

Preparing for Karaoke

1 Press the MIC LEVEL –

repeatedly to reduce the

microphone volume level.

Alternatively, press MIC/GUITAR

LEVEL – on the unit repeatedly to

reduce the microphone volume

level.

2 Press GUITAR on the unit

repeatedly to select “OFF”.

3 Connect an optional

microphone with 6.3 mm plug

to MIC1 or MIC2/GUITAR jack on

the unit.

Connect another optional

microphone if you want to sing in

duet.

4 Start playing the music and

adjust the microphone volume.

Press MIC ECHO repeatedly to

adjust the echo effect.

5 Start singing along with the

music.

Note

••We do not recommend using a

microphone adaptor when connecting

a microphone to MIC1 or MIC2/GUITAR

jack.

••If howling occurs:

— move the microphone away from the

speakers.

— change the direction of the

microphone.

— press the MIC LEVEL – repeatedly.

— press MIC ECHO repeatedly to adjust

the echo level.

••Microphone sound will not be

transferred to the USB device during

USB transfer.

••When using the Wireless Party Chain,

sound from the microphone is only

output from the system to which the

microphone is connected.

••You cannot adjust the microphone

volume level using the VOLUME/DJ

CONTROL knob on the unit or  +/–

button on the remote control. Press the

MIC LEVEL +/– repeatedly to adjust the

microphone volume level.

••If the sound through the microphone

is extremely loud, it may be distorted.

Press MIC LEVEL – repeatedly to reduce

the microphone volume.

Reducing the vocal sound

(Vocal Fader)

You can reduce the sound of the

vocal in stereo source.

Press VOCAL FADER repeatedly to

select “ON V FADER”.

To cancel Vocal Fader effect, press

VOCAL FADER repeatedly to select

“OFF”.

Changing the key (Key Control)

Press KEY CONTROL /•to suit

your vocal range.

Activating the Karaoke scoring

mode (Score Mode)

You can only use scoring function

when the microphone is connected.

Your score is calculated from a scale

of 0 to 99 by comparing your voice

with the music source.

1 Start playing the music.

2 Press SCORE before singing a

song.

54GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

3 After singing for more than a

minute, press SCORE again to

view your score.

Changing your voice (Voice

Changer)

You can change your voice when

you talk or sing into microphone.

Press VOICE CHANGER repeatedly

to change your voice effect.

To turn off Voice Changer

Press VOICE CHANGER repeatedly to

select “OFF”.

Using the Voice

Guidance

You can hear Voice Guidance when

the system enters the BLUETOOTH

pairing mode or a BLUETOOTH

device is being connected or

disconnected from the system.

1 Press OPTIONS.

2 Press / repeatedly to select

“VOICE GUIDANCE”, then press

3 Press / repeatedly to select

“ON”, then press .

The Voice Guidance is activated.

To exit the options menu, press

OPTIONS.

To deactivate Voice Guidance

Repeat the steps in “Using the Voice

Guidance” (page 54) and select

“OFF” in step 3.

To adjust the level of the Voice

Guidance

1 Press OPTIONS.

2 Press / repeatedly to select

“SAMPLER”, then press .

3 Press / repeatedly to adjust

the Voice Guidance level, then

press .

Note

••The Voice Guidance volume level

change according to the system’s

volume level. However, in some cases,

the Voice Guidance volume level may

not change.

••In some cases, there may be a delay

in Voice Guidance output or the Voice

Guidance may not work.

Enjoying sound from a

guitar

You can listen to the sound from the

guitar by connecting a guitar to the

MIC2/GUITAR jack on the unit.

You can also play the guitar and sing

along by connecting an optional

microphone with 6.3 mm plug to the

MIC1 jack on the unit.

Your guitar sound can be changed

by selecting the guitar effect.

1 Press MIC/GUITAR LEVEL – on

the unit repeatedly to reduce

the guitar volume level.

2 Use an instrument cable (not

supplied) to connect a guitar

(not supplied) to MIC2/GUITAR

jack on the unit.

55GB

Other Operations

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

3 Press GUITAR on the unit

repeatedly to select the guitar

effect.

••“CLEAN”: original guitar sound.

Recommended for electric guitar

or electro-acoustic guitar.

••“O.DRIVE”: distorted sound

similar to an overdriven guitar

amplifier. Recommended for

electric guitar.

••“BASS”: original guitar sound.

Recommended for bass guitar.

4 Start playing the guitar and

adjust the guitar volume.

The guitar sound is output from the

system.

Note

••We do not recommend using a

microphone adaptor when connecting

a microphone to MIC1 jack.

••Howling may occur when using electro-

acoustic guitar with “O.DRIVE” effect.

Press MIC/GUITAR LEVEL– on the unit

repeatedly to reduce the guitar volume.

Otherwise, change to the other guitar

effect.

••Before disconnecting the guitar from

the system, press MIC/GUITAR LEVEL–

on the unit repeatedly to reduce the

guitar volume.

To turn off the guitar mode

Press GUITAR on the unit repeatedly

to select “OFF”.

Enjoying music with the

Party Light and Speaker

Light (MHC-M80D/

MHC-M60D only)

Note

Party Light is available for MHC-M80D

only.

1 Press PARTY LIGHT repeatedly

to select “LED ON”.

Alternatively, press SPEAKER LIGHT

on the unit repeatedly to select “LED

ON” (MHC-M60D only).

2 Press LIGHT MODE repeatedly to

select the illumination mode

you want.

The illumination mode will be

different when Wireless Party Chain

is activated.

To turn off Party Light and

Speaker Light

Press PARTY LIGHT repeatedly to

select “LED OFF”.

Note

••Do not look directly at the light-emitting

part when the Party Light (MHC-M80D

only) and Speaker Light are turned on.

••If the illumination brightness is glaring,

switch on the room lights or turn off the

illumination.

••You can turn on or off the Party Light

(MHC-M80D only) and Speaker Light

when demonstration is turned on.

56GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Using the Sleep Timer

The system turns off automatically

after the preset time.

Press SLEEP repeatedly to select

the time you want.

To cancel Sleep Timer, press SLEEP

repeatedly to select “OFF”.

Hint

To check the remaining time before the

system turns off, press SLEEP.

Using optional

equipment

1 Press  – repeatedly until

“VOL MIN” appears on the

display.

2 Connect an optional equipment

(page 19).

3 Press FUNCTION repeatedly to

select “AUDIO IN”.

4 Start playing the connected

equipment.

5 Press  + repeatedly to adjust

the volume.

Note

The system may enter standby mode

automatically if the volume level of the

connected equipment is too low. Adjust

the volume level of the equipment.

To turn off automatic standby function,

see “Setting the automatic standby

function” (page 56).

Deactivating the

buttons on the unit

(Child Lock)

You can deactivate the buttons

(except ) on the unit to prevent

misoperation, such as child mischief.

Hold down  on the unit for more

than 5 seconds.

“CHILD LOCK ON” appears on the

display.

You can only operate the system using

the buttons on the remote control.

To turn off the Child Lock function,

hold down  on the unit for more

than 5seconds until “CHILD LOCK OFF”

appears on the display.

Note

••Child Lock function will be turned off

automatically when you disconnect the

AC power cord (mains lead).

••Child Lock function cannot be activated

when you open the disc tray.

Setting the automatic

standby function

The system enters standby mode

automatically in about 15 minutes

when there is no operation or audio

signal output.

By default, the automatic standby

function is turned on.

1 Press OPTIONS.

2 Press / repeatedly to select

“AutoSTBY”, then press .

57GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

3 Press / repeatedly to select

“ON” or “OFF”, then press .

To exit the options menu, press

OPTIONS.

Note

••“AutoSTBY” flashes on the display about

2 minutes before entering standby

mode.

••The automatic standby function does

not work in the following cases:

— during tuner function.

— when the Sleep Timer is activated.

— when microphone or guitar is

connected.

— when the system become Party

Guest during Wireless Party Chain.

Updating the software

The software of this system may be

updated in the future.

You can update your system’s pre-

installed software from the websites

below.

Follow the online instructions to

update the software.

For customers in Latin America:

<http://esupport.sony.com/LA>

For customers in Europe and

Russia:

<http://www.sony.eu/support>

For customers in other countries/

regions:

<http://www.sony-asia.com/

support>

Additional Information

Troubleshooting

Should you encounter a problem

with your system, find your problem

in the troubleshooting checklist

below and take the corrective

action.

If the problem persists, consult your

nearest Sony dealer.

Note that if the service personnel

changes some parts during repair,

these parts may be retained.

If “PROTECTX” (X is a number)

and “CHECK MANUAL” flashes

on the display

Immediately unplug the AC

power cord (mains lead), and

check the following items.

••Are you using only the supplied

speakers?

••Is anything blocking the

ventilation holes of the unit?

After you have checked and

found no problems, reconnect

the AC power cord (mains lead),

and turn on the system. If the

issue persists, contact your

nearest Sony dealer.

General

The power does not turn on.

••Check that the AC power cord

(mains lead) is connected securely.

The system has entered standby

mode.

••This is not a malfunction. The

system enters standby mode

automatically in about 15 minutes

when there is no operation or

audio signal output (page 56).

58GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

The unit becomes hot during

operation.

••The heat buildup is caused by the

electric circuit operation even if it

is operated at low volume. This is

not a malfunction.

••Place the unit on an open shelf

cabinet. Do not place it in a

confined space, such as a rack.

••Place the unit at least 10 cm from

the surrounding wall and objects.

Do not cover the ventilation holes

with newspapers, tablecloths,

curtains, etc.

There is no sound.

••Adjust the volume.

••Check the speaker connections

(page 19).

••Check the connection of the

optional equipment, if any

(page19).

••Turn on the connected equipment.

••Unplug the AC power cord (mains

lead), then plug in the AC power

cord (mains lead) again and turn

on the system.

There is no picture/sound when

connected to the HDMI OUT (TV)

ARC jack.

••Change the setting

in [HDMI SETUP] –

[HDMI RESOLUTION]. The problem

may be solved.

••The equipment connected to

the HDMI OUT (TV) ARC jack

does not conform to the audio

signal format. In this case, set

[HDMI SETUP] – [AUDIO(HDMI)] to

[PCM] (page 35).

••Try the following:

•—Turn the system off and on

again.

•—Turn the connected equipment

off and on again.

•—Disconnect then connect the

HDMI cable again.

There is no microphone sound.

••Adjust the microphone volume

level.

••Make sure the microphone is

connected to the MIC1 or MIC2/

GUITAR jack on the unit correctly.

••Make sure the microphone is

turned on.

Microphone adaptor (not

supplied) cannot be removed.

••Use a tool such as plier to

disconnect the microphone

adaptor from MIC1 or MIC2/

GUITAR jack on the unit.

No TV sound is heard from the

system. “CODE 01” and “SGNL ERR”

appear on the display.

••This system supports 2-channel

Linear PCM formats only. Check

the audio output setting on the

TV and change it to PCM output

mode if automatic mode is

selected.

••Check that the speaker output

setting on the TV is set to use

external speakers.

There is severe hum or noise.

••Move the system away from

sources of noise.

••Connect the system to a different

wall outlet.

••Install a noise filter (not supplied)

to the AC power cord (mains lead).

••Turn off surrounding electrical

equipment.

••The noise generated by the

cooling fans of the system may be

heard when the system is turned

on. This is not a malfunction.

••Move the unit away from the neon

signs or fluorescent light.

59GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

The remote control does not

function.

••Remove the obstacles between

the remote control and the unit.

••Move the remote control closer to

the unit.

••Point the remote control at the

unit’s sensor.

••Replace the batteries (R03/size

AAA).

••Move the unit away from the

fluorescent light.

There is acoustic feedback.

••Reduce the volume.

••Move the microphone and guitar

away from the system or change

the direction of the microphone.

The color irregularity on a TV

screen persists.

••Turn off the TV at once, then turn

it on after 15 to 30 minutes. If the

color irregularity still persists,

place the system farther away

from the TV.

“CHILD LOCK” appears when you

press any button on the unit.

••Set the Child Lock function to off

(page 56).

A clicking sound is heard when

system is turned on.

••This is the operating sound and it

occurs when the system is turned

on or off, for example. This is not a

malfunction.

The sound loses stereo effect

during playback.

••Turn off the Vocal Fader

(page53).

••Make sure the system is

connected properly.

••Check the speaker connections

(page 18).

Speakers

Sound comes from only one

channel or the left and right

volume is unbalanced.

••Place the speakers as

symmetrically as possible.

••Check that the speakers are

connected securely and correctly.

••The source being played back is

monaural.

There is no sound from a specific

speaker.

••Check that the speaker is

connected securely and correctly.

Disc player

The disc tray does not open and

“LOCKED” appears on the display.

••Consult your nearest Sony dealer

or local authorized Sony service

facility.

The disc tray does not close.

••Load the disc correctly.

The disc does not eject.

••You cannot eject the disc during

Synchronized Transfer or REC1

Transfer. Press  to cancel the

transfer, then press  on the unit

to eject the disc.

••Consult your nearest Sony dealer.

Playback does not start.

••Wipe the disc clean (page 67).

••Reload the disc.

••Load the disc that this system can

play back (page 8).

••Remove the disc and wipe away

the moisture on the disc, then

leave the system turned on for

a few hours until the moisture

evaporates.

••The region code on the DVD VIDEO

does not match the system.

60GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

The sound skips.

••Wipe the disc clean (page 67).

••Reload the disc.

••Move the unit to a place with no

vibration.

••Move the speakers away from the

unit. When you listen to a track

with bass sounds at high volume,

the speaker vibration may cause

the sound to skip.

Playback does not start from the

first track.

••Set the play mode to Normal Play

(page 29).

••Resume Play has been selected.

Press  twice. Then, press  to

start playback.

You cannot perform some

functions such as Stop, Lock

Search, Slow-motion Play, Repeat

Play, or Shuffle Play.

••Depending on the disc, you may

not be able to do some of the

operations above. Refer to the

operating instructions supplied

with the disc.

The DATA CD/DATA DVD (MP3,

MPEG4, or Xvid) cannot be played

back.

••The data is not stored in the

supported format.

••Make sure you have selected

the correct Media Mode before

playback.

The folder name, track name, file

name and ID3 tag characters do

not appear properly.

••The ID3 tag is not Version 1 (1.0/1.1)

or Version 2 (2.2/2.3).

••The character codes that can be

displayed by this system are as

follows:

•—Upper cases (A to Z)

•—Numbers (0 to 9)

•—Symbols (< > * +, [ ] \ _)

Other characters appear as “_”.

USB device

Transferring results in an error.

••You are using an unsupported USB

device. Check the information on

the website about compatible USB

devices (page 11).

••The USB device is not formatted

correctly. Refer to the operating

instructions of the USB device on

how to format.

••Turn off the system and remove

the USB device. If the USB device

has a power switch, turn the USB

device off and on again after

removing it from the system. Then,

perform the transfer again.

••If the transfer and erase

operations are repeated multiple

times, the file structure within the

USB device becomes fragmented.

Refer to the operating instructions

of the USB device on how to deal

with this problem.

••The USB device was disconnected

or the power was turned off

during transfer. Delete the

partially-transferred file, and

perform the transfer again. If this

does not fix the problem, the USB

device may be broken. Refer to the

operating instructions of the USB

device on how to deal with this

problem.

Audio files or folders on the USB

device cannot be erased.

••Check if the USB device is write-

protected.

61GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••The USB device was disconnected

or the power was turned off

during the erase operation. Delete

the partially-erased file. If this

does not fix the problem, the USB

device may be broken. Refer to the

operating instructions of the USB

device on how to deal with this

problem.

There is no sound.

••The USB device is not connected

correctly. Turn off the system and

reconnect the USB device, then

turn on the system and check if

“USB” appears on the display.

There is noise, skipping, or

distorted sound.

••You are using an unsupported USB

device. Check the information on

the website about compatible USB

devices (page 11).

••Turn off the system and reconnect

the USB device, then turn on the

system.

••The music data itself contains

noise, or the sound is distorted.

Noise may have entered during

the transfer process. Delete the

file, and try transfer again.

••The bit rate used in encoding an

audio file was low. Send an audio

file with higher bit rate to the USB

device.

“READING” is displayed for an

extended time, or it takes a long

time before playback starts.

••The reading process can take a

long time in the following cases.

•—There are many folders or files

on the USB device (page 10).

•—The file structure is extremely

complex.

•—The memory capacity is

excessive.

•—The internal memory is

fragmented.

“NO FILE” appears on the display.

••The system has entered the

software update mode, and

all buttons (except ) are

deactivated. Press  on the unit to

cancel the software update.

“OVER CURRENT” appears on the

display.

••A problem has been detected

with the level of electrical current

from the (USB) port. Turn off

the system and remove the USB

device from the port. Make sure

there is no problem with the USB

device. If this display pattern

persists, contact your nearest Sony

dealer.

Erroneous display.

••The data stored in the USB

device may have been corrupted,

perform the transfer again.

••The character codes that can be

displayed by this system are as

follows:

•—Upper cases (A to Z)

•—Numbers (0 to 9)

•—Symbols (< > * +, [ ] \ _)

Other characters appear as “_”.

The USB device is not recognized.

••Turn off the system and reconnect

the USB device, then turn on the

system.

••Check the information on the

website about compatible USB

devices (page 11).

••The USB device is not working

properly. Refer to the operating

instructions of the USB device on

how to deal with this problem.

62GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Playback does not start.

••Turn off the system and reconnect

the USB device, then turn on the

system.

••Check the information on the

website about compatible USB

devices (page 11).

Playback does not start from the

first file.

••Set the play mode to Normal Play

(page 29).

Files cannot be played back.

••Make sure you have selected

the correct Media Mode before

playback.

••USB devices formatted with file

systems other than FAT16 or FAT32

are unsupported.*

••If you use a partitioned USB

device, only files on the first

partition can be played back.

* This system supports FAT16 and FAT32,

but some USB devices may not support

all of these FAT. For details, refer to the

operating instructions of each USB

device or contact the manufacturer.

Picture

There is no picture.

••Check that the system is

connected securely.

••If the HDMI cable is damaged,

replace it with a new one.

••Make sure you connect the unit

to the HDMI input jack on your TV

(page22).

••Make sure you turn on the TV and

operate the TV correctly.

••Make sure you select the input

according to the connection on

the TV so that you can view the

pictures from the system.

••(Except for Latin American,

European, and Russian models)

Make sure you set the color

system correctly, according to your

TV’s color system.

Picture noise appears.

••Wipe the disc clean (page 67).

••(Except for Latin American,

European, and Russian models)

When you play back a VIDEOCD

recorded in a different color

system from the one you set to the

system, the picture image may be

distorted (page 24, 34).

••(Except for Latin American,

European, and Russian models)

Set the color system to match your

TV (page 24, 34).

The aspect ratio of the TV screen

cannot be changed.

••The aspect ratio is fixed on your

DVD VIDEO and video file.

••Depending on the TV, you may not

change the aspect ratio.

The language for the sound track

cannot be changed.

••Multilingual tracks are not

recorded on the DVD VIDEO being

played back.

••The DVD VIDEO prohibits changing

the language for the sound track.

The subtitles language cannot be

changed.

••Multilingual subtitles are not

recorded on the DVD VIDEO being

played back.

••The DVD VIDEO prohibits changing

the subtitles.

The subtitles cannot be turned off.

••The DVD VIDEO prohibits turning

off subtitles.

63GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

The camera angles cannot be

changed.

••Multi-angles are not recorded on

the DVD VIDEO being played back.

••The DVD VIDEO prohibits changing

the angles.

Tuner*

There is severe hum or noise, or

stations cannot be received.

••Connect the antenna properly.

••Change antenna location and

its orientation to obtain good

reception.

••Turn off nearby electrical

equipment.

* Radio may not be received depending

on the radio wave conditions or the

housing environment in your area.

BLUETOOTH device

Pairing cannot be performed.

••Move the BLUETOOTH device

closer to the system.

••Pairing may not be possible if

other BLUETOOTH devices are

present around the system.

In this case, turn off the other

BLUETOOTH devices.

••Make sure to enter the correct

passkey when selecting the

system’s name (this system) on

the BLUETOOTH device.

The BLUETOOTH device cannot

detect the system, or “BT OFF”

appears on the display.

••Set the BLUETOOTH signal to “BT

ON” (page 44).

Connection is not possible.

••The BLUETOOTH device you

attempted to connect does not

support the A2DP profile, and

cannot be connected with the

system.

••Enable the BLUETOOTH function of

the BLUETOOTH device.

••Establish a connection from the

BLUETOOTH device.

••The pairing registration

information has been erased.

Perform the pairing operation

again.

The sound skips or fluctuates, or

the connection is lost.

••The system and the BLUETOOTH

device are too far apart.

••If there are obstacles between

the system and your BLUETOOTH

device, remove or avoid the

obstacles.

••If there is equipment that

generates electromagnetic

radiation, such as a wireless LAN,

other BLUETOOTH device, or a

microwave oven nearby, move

them away.

The sound of your BLUETOOTH

device cannot be heard on this

system.

••Increase the volume on your

BLUETOOTH device first, then

adjust the volume using  +/–.

There is severe hum, noise, or

distorted sound.

••If there are obstacles between

the system and your BLUETOOTH

device, remove or avoid the

obstacles.

••If there is equipment that

generates electromagnetic

radiation, such as a wireless LAN,

other BLUETOOTH device, or a

microwave oven nearby, move

them away.

••Turn down the volume of the

connected BLUETOOTH device.

64GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Control for HDMI (“BRAVIA”

Sync)

The system does not turn on even

when the TV is turned on.

••Hold down SHIFT and press

SETUP, then set [HDMI SETUP]

– [CONTROL FOR HDMI] to [ON]

(page 35). The TV must support

the Control for HDMI function

(page 49). For details, refer to

the operating instructions of your

TV.

••Check the speaker settings of the

TV. The system power syncs with

the speaker settings of the TV.

For details, refer to the operating

instructions of your TV.

••If the sound was output from the

TV’s speakers the previous time,

the system does not turn on even

when the TV is turned on.

The system turns off when the TV

is turned off.

••Check the setting of [HDMI SETUP]

– [STANDBY LINKED TO TV]

(page 36). When

[STANDBY LINKED TO TV] is set

to [ON], the system turns off

automatically when you turn off

the TV regardless of the input.

The system does not turn off even

when the TV is turned off.

••Check the setting of [HDMI SETUP]

– [STANDBY LINKED TO TV] (page

36).

To turn the system off

automatically regardless of the

input when you turn off the TV, set

[STANDBY LINKED TO TV] to [ON].

The TV must support the Control

for HDMI function (page 49).

For details, refer to the operating

instructions of your TV.

No TV sound is output from the

system.

••Check the type and connection of

the HDMI cable or audio cable that

is connected to the system and

the TV (page 22).

••If your TV is compatible with

Audio Return Channel, make

sure the system is connected

to an ARC-compatible HDMI

IN jack of the TV (page 22).

If sound is still not output or if

sound is interrupted, connect

an audio cable (not supplied),

hold down SHIFT and press

SETUP, then set [HDMI SETUP]–

[AUDIO RETURN CHANNEL] to

[OFF] (page 36).

••If your TV is not compatible with

Audio Return Channel, TV sound

will not be output from the system

even if the system is connected to

the TV’s HDMI IN jack. To output TV

sound from the system, connect

an audio cable (not supplied)

(page 23).

••Change the function of the system

to “TV” (page 23).

••Increase the volume on the

system.

••Depending on the order in which

you connect the TV and the

system, the system may be muted

and “ ” (muting) lights up on the

display of the unit. If this happens,

turn on the TV first, then the

system.

••Set the speakers setting of the TV

(BRAVIA) to Audio System. Refer to

the operating instructions of your

TV on how to set the TV.

The sound is output from both the

system and the TV.

••Mute the sound of the system or

the TV.

65GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••Change the speaker output on the

TV to TV speaker or Audio System.

The Control for HDMI function

does not work properly.

••Check the connection with the

system (page 17).

••Enable the Control for HDMI

function on the TV. For details,

refer to the operating instructions

of your TV.

••Wait a while, then try again. If you

unplug the system, it will take

a while before operations can

be made. Wait for 15 seconds or

longer, then try again.

••Make sure the TV connected to

the system support the Control for

HDMI function.

••The type and number of devices

that can be controlled by the

Control for HDMI function is

restricted by the HDMI CEC

standard as follows:

•—Recording devices (Blu-ray Disc

recorder, DVD recorder, etc.): up

to 3 devices

•—Playback devices (Blu-ray Disc

Player, DVD player, etc.): up to

3devices (this system uses one

of them)

•—Tuner-related devices: up to

4devices

•—Audio system (receiver/

headphone): up to 1 device

(used by this system)

Wireless Party Chain

BLUETOOTH device cannot be

connected to the system during

Wireless Party Chain function.

••After connecting all the systems,

perform the pairing and

connecting operations between

the BLUETOOTH device and the

Party Host.

Resetting the system

If the system still does not operate

properly, reset the system to factory

default settings.

Use the buttons on the unit to

perform this operation.

1 Unplug the AC power cord (mains

lead), then plug it back in.

2 Press  to turn on the system.

3 Hold down VOCAL FADER and

MIC ECHO for about 3 seconds.

“RESET” appears on the display.

After the reset completes, the

system automatically reboots. Press

 to turn on the system.

All BLUETOOTH pairing information

and user-configured settings, such

as preset radio stations are reset to

factory default setting (except for

some setup menu settings).

To reset all setup menu settings, see

“Returning the setup menu settings

to the default” (page 65).

Returning the setup menu

settings to the default

You can return the setup

menu settings (except for

[PARENTAL CONTROL] settings) to

the default settings.

1 Hold down SHIFT and press

SETUP.

The setup menu appears on the TV

screen.

2 Press / repeatedly to select

[SYSTEM SETUP], then press .

3 Press / repeatedly to select

[RESET], then press .

66GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

4 Press / repeatedly to select

[YES], then press .

It takes a few seconds to complete.

Do not press  while resetting the

system.

Self-diagnosis Function

When letters/numbers appear

on the TV screen or the display

When the self-diagnosis function

is activated to prevent the system

from malfunctioning, a service

number appears. The service

number consists of an alphabet

and numerals (e.g. C 13 50). See the

following table for the cause and

corrective action.

First 3

characters of

the service

number

Cause and corrective

action

C 13 This disc is dirty.

••Clean the disc with a

soft cloth (page 67).

C 31 The disc is not inserted

correctly.

••Turn off the system,

then turn it back on

again. Then re-insert the

disc correctly.

E XX

(XX is a

number)

To prevent a

malfunction, the system

has performed the

self-diagnosis function.

••Contact your nearest

Sony dealer or local

authorized Sony service

facility and give the

5-character service

number.

Example: E 61 10

Messages

One of the following messages may

appear or flash on the display during

operation.

CANNOT PLAY

••A disc that cannot be played back

was inserted.

••A DVD VIDEO with unsupported

region code was inserted.

CODE 01/SGNL ERR

An unsupported audio signal is

input from the connected TV’s HDMI

IN (ARC) jack (page 22).

DATA ERROR

••The file is created in unsupported

format.

••The file extensions does not match

the file format.

DEVICE ERROR

The USB device could not be

recognized or an unknown device is

connected.

DEVICE FULL

The memory of the USB device is

full.

ERASE ERROR

Erase of audio files or folders on the

USB device failed.

FATAL ERROR

The USB device was removed during

transfer or erase operation, and may

have been damaged.

FOLDER FULL

You cannot transfer onto the USB

device because the number of

folders has reached its maximum.

NoDEVICE

No USB device is connected or

unsupported device is connected.

67GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

NO DISC

There is no disc in the unit.

NO MUSIC

No supported audio files exist in the

playback source.

NO VIDEO

No supported video files exist in the

playback source.

NOT USE

You tried to perform a specific

operation under conditions where

that operation is prohibited.

NO SUPPORT

An unsupported USB device is

connected, or the USB device is

connected through a USB hub.

OVER CURRENT

An over current from the (USB)

port was detected.

PROTECT

The USB device is write-protected.

PUSH STOP

You tried to perform an operation

that can be performed only when

the playback is stopped.

READING

The system is reading information

of the disc or USB device. Some

operations are not available.

REC ERROR

The transfer did not start, stopped

partway, or otherwise could not be

performed.

TRACK FULL

You cannot transfer onto the USB

device because the number of files

has reached its maximum.

Precautions

When carrying the unit

To avoid damaging the disc

mechanism, perform the following

procedure before carrying the unit.

Use the buttons on the unit to

perform this operation.

1 Press  to turn on the system.

2 Press FUNCTION repeatedly to

select “DVD/CD”.

3 Remove the disc.

Press  to open and close the disc

tray.

Wait until “NO DISC” appears on the

display.

4 Press  to turn off the system.

5 Unplug the AC power cord (mains

lead).

Notes on discs

••Before playing, wipe the disc with a

cleaning cloth from the center outward

to the edge.

••Do not clean discs with solvents, such

as benzine, thinner, or commercially

available cleaners or anti-static spray

intended for vinyl LPs.

••Do not expose discs to direct sunlight

or heat sources such as hot air ducts,

nor leave them in a car parked in direct

sunlight.

On safety

••Completely disconnect the AC power

cord (mains lead) from the wall outlet

(mains) if it is not going to be used

for an extended period of time. When

unplugging the unit, always grip the

plug. Never pull the cord itself.

••Should any solid object or liquid get

into the system, unplug the system, and

have it checked by qualified personnel

before operating it again.

68GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••AC power cord (mains lead) must be

changed only at the qualified service

shop.

On handling the system

This system is not drip-proof or

waterproof. Make sure not to splash water

on the system or clean it with water.

On placement

••Do not place the system in an inclined

position or in locations that are

extremely hot, cold, dusty, dirty, or

humid or lacking adequate ventilation,

or subject to vibration, direct sunlight or

a bright light.

••Be careful when placing the unit or

speakers on surfaces that have been

specially treated (for example, wax, oil,

polish) as staining or discoloration of

the surface may result.

••If the system is brought directly from

a cold to a warm location or is placed

in a very damp room, moisture may

condense on the lens inside the unit,

and cause the system to malfunction.

In this situation, remove the disc, and

leave the system turned on for about an

hour until the moisture evaporates.

••Heat buildup on the unit is due to

electric circuit operation even if it is

operated at low volume. Do not place

the unit in a confined space, such as a

rack. Do not cover the ventilation holes

with newspapers, tablecloths, curtains,

etc. Place the unit at least 10 cm from

the surrounding wall and objects.

10 cm

On heat buildup

••Heat buildup on the unit during

operation is normal and is not a cause

for alarm.

••Do not touch the cabinet if it has been

used continuously because the cabinet

may have become hot.

••Do not obstruct the ventilation

holes with any object or cover it with

newspapers, tablecloths, curtains, etc.

On the speaker system

The speaker system is not magnetically

shielded, and the picture on nearby TV

sets may become magnetically distorted.

In this situation, turn off the TV, wait 15 to

30 minutes, and turn it back on. If there is

no improvement, move the speakers far

away from the TV.

IMPORTANT NOTICE

Caution: If you leave a still video

image or on-screen display image

displayed on your TV for an extended

period of time via this system, you

risk permanent damage to your TV

screen. Projection TVs are especially

susceptible to this.

Cleaning the cabinet

Clean this system with a soft cloth slightly

moistened with a mild detergent solution.

Do not use any type of abrasive pad,

scouring powder, or solvent, such as

thinner, benzine, or alcohol.

On BLUETOOTH communication

••BLUETOOTH devices should be used

within approximately 10 meters

(unobstructed distance) of each

other. The effective communication

range may become shorter under the

following conditions.

— When a person, metal object, wall

or other obstruction is between

the devices with a BLUETOOTH

connection

— Locations where a wireless LAN is

installed

— Around microwave ovens that are

in use

— Locations where other

electromagnetic waves are

generated

69GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

••BLUETOOTH devices and wireless LAN

(IEEE 802.11b/g/n) equipment use the

same frequency band (2.4GHz). When

using your BLUETOOTH device near

a device with wireless LAN capability,

electromagnetic interference may

occur. This could result in lower data

transfer rates, noise, or inability to

connect. If this happens, try the

following remedies:

— Use this system at least 10 meters

away from the wireless LAN

equipment.

— Turn off the power of the wireless

LAN equipment when using your

BLUETOOTH device within 10 meters.

— Use this system and BLUETOOTH

device as closer to each other as

possible.

••The radio waves broadcast by this

system may interfere with the operation

of some medical devices. Since this

interference may result in malfunction,

always turn off the power on this

system and BLUETOOTH device in the

following locations:

— In hospitals, on trains, in airplanes,

at gas stations, and any place where

flammable gases may be present

— Near automatic doors or fire alarms

••This system supports security

functions that comply with BLUETOOTH

specifications to ensure secure

connections during communication

using BLUETOOTH technology. However,

this security may be insufficient

depending on the setting contents

and other factors, so always be careful

when performing communication using

BLUETOOTH technology.

••Sony cannot be held liable in any way

for damages or other loss resulting

from information leaks during

communication using BLUETOOTH

technology.

••BLUETOOTH communication is not

necessarily guaranteed with all

BLUETOOTH devices that have the same

profile as this system.

••BLUETOOTH devices connected with

this system must comply with the

BLUETOOTH specification prescribed

by the Bluetooth SIG, Inc., and must

be certified to comply. However, even

when a device complies with the

BLUETOOTH specification, there may

be cases where the characteristics or

specifications of the BLUETOOTH device

make it impossible to connect, or may

result in different control methods,

display or operation.

••Noise may occur or the audio may

cut off depending on the BLUETOOTH

device connected with this system,

the communications environment, or

surrounding conditions.

Specifications

Inputs

AUDIO IN (TV) L/R:

Voltage 2 V, impedance

47kilohms

TV (ARC):

Supported audio signal:

2-channel Linear PCM

MIC1:

Sensitivity 1 mV, impedance

10kilohms

MIC2/GUITAR:

Sensitivity 1 mV, impedance

10kilohms (When guitar mode is

turned off.)

Sensitivity 200 mV, impedance

250kilohms (When guitar mode is

turned on.)

Outputs

HDMI OUT (TV) ARC:

Supported audio signal:

2-channel Linear PCM (up to

48kHz), Dolby Digital

HDMI section

Connector:

Type A (19pin)

70GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Disc player section

System:

Compact disc and digital audio

and video system

Laser Diode Properties

Emission Duration: Continuous

Laser Output*: Less than 44.6 μW

* This output is the value

measurement at a distance of

200 mm from the objective lens

surface on the Optical Pick-up

Block with 7 mm aperture.

Frequency response:

20Hz – 20kHz

Video color system format:

Latin American model:

NTSC

Other models:

NTSC and PAL

USB section

Supported USB device:

Mass Storage Class

Maximum current:

1A

(USB) port:

Type A

FM tuner section

FM stereo, FM superheterodyne tuner

Antenna:

FM lead antenna

Tuning range:

87.5MHz – 108.0MHz (50kHz

step)

BLUETOOTH section

Communication system:

BLUETOOTH Standard version 4.2

Output:

BLUETOOTH Standard Power

Class 2

Maximum output power:

< 9.5 dBm

Maximum communication range:

Line of sight approx. 10 m*1

Maximum number of devices to be

registered

8 devices

Maximum number of simultaneous

connection (Multipoint)

3 devices

Frequency band:

2.4 GHz band (2.4000 GHz –

2.4835GHz)

Modulation method:

FHSS (Freq Hopping Spread

Spectrum)

Compatible BLUETOOTH profiles*2:

A2DP (Advanced Audio

Distribution Profile)

AVRCP (Audio Video Remote

Control Profile)

SPP (Serial Port Profile)

Supported codecs:

SBC (Subband Codec)

AAC (Advanced Audio Coding)

LDAC

*1 The actual range will vary depending

on factors such as obstacles between

devices, magnetic fields around a

microwave oven, static electricity,

reception sensitivity, antenna’s

performance, operating system,

software application, etc.

*2 BLUETOOTH standard profiles

indicate the purpose of BLUETOOTH

communication between devices.

Supported audio formats

Supported bit rate and sampling

frequencies:

MP3:

32/44.1/48kHz, 32 kbps –

320kbps (VBR)

AAC:

44.1 kHz, 48 kbps – 320kbps

(CBR/VBR)

WMA:

44.1 kHz, 48 kbps – 192 kbps

(CBR/VBR)

WAV:

44.1/48 kHz (16 bit)

71GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Supported video formats

Xvid:

Video codec: Xvid video

Bit rate: 4.854 Mbps (MAX)

Resolution/Frame rate:

720 × 480, 30 fps

720 × 576, 25 fps (except for Latin

American model)

Audio codec: MP3

MPEG4:

File format: MP4 File Format

Video codec: MPEG4 Simple

Profile (AVC is not compatible.)

Bit rate: 4 Mbps

Resolution/Frame rate:

720 × 480, 30 fps

720 × 576, 25 fps (except for Latin

American model)

Audio codec: AAC-LC (HE-AAC is

not compatible.)

DRM: Not compatible

Speaker System

SS-WM80D

Speaker system:

1-way, Bass Reflex

Speaker unit:

Subwoofer: 250mm, cone type

Rated impedance:

3 ohms

Dimensions (w/h/d) (Approx.):

340 mm × 405 mm × 315 mm

Mass (Approx.):

8.5 kg

SS-M80D

Speaker system:

3-way, Bass Reflex

Speaker unit:

Mid: 80 mm, cone type

Tweeters: 50 mm, cone type

Woofers: 200 mm, cone type

Rated impedance:

Mid/Tweeter: 8 ohms

Woofers: 3 ohms

Dimensions (w/h/d) (Approx.):

285 mm × 405 mm × 350 mm

Mass (Approx.):

7.4 kg

SS-M60D

Speaker system:

3-way, Bass Reflex

Speaker unit:

Mid: 80 mm, cone type

Tweeters: 50 mm, cone type

Woofers: 200 mm, cone type

Rated impedance:

Mid/Tweeter: 8 ohms

Woofers: 3 ohms

Dimensions (w/h/d) (Approx.):

285 mm × 405 mm × 310 mm

Mass (Approx.):

7.2 kg

SS-M40D

Speaker system:

2-way, Bass Reflex

Speaker unit:

Tweeters: 50 mm, cone type

Woofers: 200 mm, cone type

Rated impedance:

6 ohms

Dimensions (w/h/d) (Approx.):

255 mm × 405 mm × 220 mm

Mass (Approx.):

5.1 kg

General

Power requirements:

AC 120 V – 240 V, 50/60 Hz

Power consumption:

MHC-M80D: 390 W

MHC-M60D: 290 W

MHC-M40D: 120 W

72GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Power consumption (at the Power

Saving mode):

0.5 W (When “BT STBY” is set to

“OFF” and [CONTROL FOR HDMI]

is set to [OFF].)

2 W* (When “BT STBY” is set to

“ON” and [CONTROL FOR HDMI] is

set to [ON].)

Dimensions (w/h/d) (excl. speakers)

(Approx.):

335 mm × 172 mm × 310 mm

Mass (excl. speakers) (Approx.):

HCD-M80D: 4.0 kg

HCD-M60D: 3.8 kg

HCD-M40D: 2.9 kg

Operating temperature:

5 °C to 35 °C

* The power consumption of the system

will be less than 0.5 W when there is no

HDMI connection and “BT STBY” is set

to “OFF”.

Design and specifications are subject

to change without notice.

73GB

Additional Information

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Language code list

The language spellings conform to the ISO 639:1988 (E/F) standard.

Code Language Code Language Code Language Code Language

1027 Afar 1186 Scots Gaelic 1350 Malayalam 1513 Siswati

1028 Abkhazian 1194 Galician 1352 Mongolian 1514 Sesotho

1032 Afrikaans 1196 Guarani 1353 Moldavian 1515 Sundanese

1039 Amharic 1203 Gujarati 1356 Marathi 1516 Swedish

1044 Arabic 1209 Hausa 1357 Malay 1517 Swahili

1045 Assamese 1217 Hindi 1358 Maltese 1521 Tamil

1051 Aymara 1226 Croatian 1363 Burmese 1525 Telugu

1052 Azerbaijani 1229 Hungarian 1365 Nauru 1527 Tajik

1053 Bashkir 1233 Armenian 1369 Nepali 1528 Thai

1057 Byelorussian 1235 Interlingua 1376 Dutch 1529 Tigrinya

1059 Bulgarian 1239 Interlingue 1379 Norwegian 1531 Turkmen

1060 Bihari 1245 Inupiak 1393 Occitan 1532 Tagalog

1061 Bislama 1248 Indonesian 1403 (Afan) Oromo 1534 Setswana

1066 Bengali; Bangla 1253 Icelandic 1408 Oriya 1535 Tonga

1067 Tibetan 1254 Italian 1417 Punjabi 1538 Turkish

1070 Breton 1257 Hebrew 1428 Polish 1539 Tsonga

1079 Catalan 1261 Japanese 1435 Pashto; Pushto 1540 Tatar

1093 Corsican 1269 Yiddish 1436 Portuguese 1543 Twi

1097 Czech 1283 Javanese 1463 Quechua 1557 Ukrainian

1103 Welsh 1287 Georgian 1481

Rhaeto-Romance

1564 Urdu

1105 Danish 1297 Kazakh 1482 Kirundi 1572 Uzbek

1109 German 1298 Greenlandic 1483 Romanian 1581 Vietnamese

1130 Bhutani 1299 Cambodian 1489 Russian 1587 Volapük

1142 Greek 1300 Kannada 1491 Kinyarwanda 1613 Wolof

1144 English 1301 Korean 1495 Sanskrit 1632 Xhosa

1145 Esperanto 1305 Kashmiri 1498 Sindhi 1665 Yoruba

1149 Spanish 1307 Kurdish 1501 Sangho 1684 Chinese

1150 Estonian 1311 Kirghiz 1502 Serbo-Croatian 1697 Zulu

1151 Basque 1313 Latin 1503 Singhalese 1703 Not specified

1157 Persian 1326 Lingala 1505 Slovak

1165 Finnish 1327 Laothian 1506 Slovenian

1166 Fiji 1332 Lithuanian 1507 Samoan

1171 Faroese 1334

Latvian; Lettish

1508 Shona

1174 French 1345 Malagasy 1509 Somali

1181 Frisian 1347 Maori 1511 Albanian

1183 Irish 1349 Macedonian 1512 Serbian

74GB

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

Parental Control area code list

Code Area Code Area Code Area Code Area

2044 Argentina 2165 Finland 2362 Mexico 2149 Spain

2047 Australia 2174 France 2376 Netherlands 2499 Sweden

2046 Austria 2109 Germany 2390 New Zealand 2086 Switzerland

2057 Belgium 2248 India 2379 Norway 2528 Thailand

2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United Kingdom

2079 Canada 2254 Italy 2424 Philippines

2090 Chile 2276 Japan 2436 Portugal

2092 China 2304 Korea 2489 Russia

2115 Denmark 2363 Malaysia 2501 Singapore

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-16(1)

MHC-M80D/MHC-M60D/MHC-M40D.GB.4-731-977-17(1)