Toshiba MG08 User Manual

Displayed below is the user manual for MG08 by Toshiba which is a product in the Internal Hard Drives category. This manual has pages.

Related Manuals

Toshiba MG08 Manual

Toshiba MG08SDA800E Manual

Toshiba MG08-D Manual

Toshiba MG08SDA600E Manual

Toshiba MG08-D Manual

Toshiba MG08SCP16TE Manual

1 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

SPECIFICATIONS

Item MG08ACA16T MG08SCA16T

Interface SATA-3.3 SAS-3

Formatted Capacity 16 TB

Performance

Interface Speed 6.0 Gbit/s, 3.0 Gbit/s, 1.5 Gbit/s 12.0 Gbit/s, 6. 0 Gbit/s, 3.0 Gbit/s , 1.5 Gbit/s

Rotation Speed 7200 rpm

Buffer Size 512 MiB [7]

Maximum Sustained Data

Transfer Speed [6] (Typ.) 262 MiB/s

Logical Dat a Block

Length

MG08xxxxxxA

( fixed length ) 4096 B 4096 B / 4160 B

MG08xxxxxxE

(emulation) [8] Host:512 B, Disk:4096 B Host:512 B, Disk:4096 B

Host:520 B, Disk:4160 B

Supply Voltage Al l owable Vol t age 12 V [9] ± 10 % / 5 V [9] + 10% / -7% [10]

Power

Consumption

Random Write / Read

4KB Q1 (Typ.) 7.63 W 8.12 W

Active Idle (Idl e-A) 4.00 W 4.46 W

Acoustics[11] Active Idle (Typ.) 20 dB

• Industry Standard 3.5-inch 26.1 mm Height Form Factor

• Conventional Magnetic Recording (CMR) 16TB for

broad compatibi lit y

• Industry-lead ing 9-disk helium-sealed design for

superior stora ge den sity

• 7200 rpm Performance

• 550 Total T B Transferred per Y ear Worklo ad Rating[5]

• 512e or 4Kn Advanced Format Sector Technology;

(512e Model) Includes Toshiba Persistent Write Cache

Technology for Data-Loss Protection in Sudden Power-

Loss Events

• Sanitize Instant Erase (SIE) option model available

• Cloud-scale Sever and Storage Infrastructure

• Software-defined data center infrastructure

• File- and Object-based storage infrastructure

• Tiered Storage Infrastructure

• Workloads a nd Us e-Cases that Benefit from High

Capacity per Spindle

• Capacity-Optimized Cloud-scale and Rack-Scale

Storage Systems

• Compliance Data Life-Cycle Management

• Data Center Data-Protection and Data Back-up

Infrastructure

Using an industry -leading[1] 9-disk design pioneered by Toshiba, the MG08 Series

provides 16TB[2] of conventional magnetic recording (CMR) capacity and 7200 rpm

performance. The industry-st a ndar d 3.5-inch[3] form-factor integrates easily into

cloud-scale storage infrastructure, business-critical servers and storage, and File

and Object storage so luti ons. Toshiba’s precision industrial laser welding technology

is put to use to seal helium inside the 9-disk mechanics. The massive 16TB capacity

is delivered using proven CMR recording technology providing optimum application

compatibility and data reliability. Available with either a SATA 6.0 Gbit/s or a 12.0

Gbit/s SAS interface[4], the MG08 Series models integrate easily into standard 3.5-

inch drive bays to help reduce the footprint and operational burden of cloud-scale

storage infrastructure, and business critical servers and storage systems.

MG08 SERIES

ENTERPRISE CAPACITY HDD

Product image may represent a design model.

KEY FEATURES APPLICATIONS

2 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

[1] Source: Toshiba Electronic Devices & Storage Corporation, as of January, 2019 for the 3.5-inch, 26.1mm height.

[2] Definition of capacity: Toshiba defines a terabyte (TB) as 1 000 000 000 000 bytes. A computer operating system, however, reports storage capacity using powers

of 2 for the definition of 1TB = 240 = 1 099 511 627 776 bytes and therefore shows less storage capacity. Available storage capacity (including examples of various

media files) will vary based on file size, formatting, settings, software and operating system, such as Microsoft Operating System and/or pre-installed sof t war e

applications, or media content. Actual formatted capacity may vary.

[3] "3.5-inch" mean the form factor of HDDs. They do not indicate drive's physical size.

[4] Read and write speed may vary depending on the host device, read and write con diti o ns, and file size.

[5] Workload is defined as the amount of data written, read or verified by commands from host system.

[6] The maximum sustained data rate and interface speed may be restricted to the response speed of host system and by transmission characteristics.

1 Gbit/s = 1 000 000 000 bits/s. 1 MiB/s = 1 048 576 bytes/s

[7] A mebibyte (MiB) means 220, or 1 048 576 bytes.

[8] Read–modify-write is supported.

[9] Input voltages are specified at the HDD connector side, during HDD ready state.

[10] Make sure the value is not less than -0.3V DC (less than -0.6V, 0.1ms) when turning on or off the power.

[11] The measuring method is based on ISO 7779.

[12] Non-operating conditi on (except storage condition) assumes short term transportation.

[13] The range of altitude is 3048 m or less. Up to 55°C at 7620 m. Up to 40°C at 12 192 m.

[14] Vibration applied to the HDD is measured at near the mounting screw hole on the frame as much as possible.

[15] At random seek writ e/ read and defa ult on retry setting with log sweep vibration.

[16] At power-off state after installation

MG04ACAxxxA / MG04ACAxxxE

MG04ACA50DA / MG04ACA50DE

Item Specification

Ambient

temperature

Operating

5 °C to 55 °C

(No condensation)

Non-Operating [12] [13] -40 °C to 70 °C

(No condensation)

Relative

Humidity

Operating

5 % to 90 % R.H. (No condensation)

Non-Operating

5 % to 95 % R.H. (No condensation)

Altitude

Operating

- 305 m to 3048 m

Non-Operating [12] [13] - 305 m to 12 192 m

Shock [14]

Operating

686 m/s2 { 70 G } ( 2 ms duration )

Non-Operating

2,450 m/s2 { 250 G } ( 2 ms duration )

Vibration [14] Operating [15] 7.35 m/s 2 { 0.75 G } ( 5 to 300 Hz )

2.45 m/s2 { 0.25 G } ( 300 to 500 Hz )

Non-Operating

[16]

29.4 m/s2 { 3.0 G } ( 5 to 500 Hz )

ENVIRONMENTAL LIMITS

3 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

RELIABILITY

MODEL NUMBERS

[17] MTTF (Mean Time to Failure) is not a guarantee or estimate of product life; it is a statistical value related to mean failure rates for a large number of products which

may not accurately reflect actual operation. Actual operating life of the product may be different from the MTTF.

Item Specification

MTTF

[17]

2 500 000 hours

Non-recoverable Error Rate 10 error per 1016 bits read

Load / Unload

600 000 times

Availability

24 hours/day, 7 days/week

Rated Annual Workload

(Total TB Transferred per Year, R/W) 550 TB per year

Model Number Interface Formatted

Capacity Sector Format

MG08ACA16TA SATA-3.3 16 TB 4Kn

MG08ACA16TE SATA-3.3 16 TB 512e

MG08SCA16TA

SAS-3.0

16 TB

4Kn

MG08SCA16TE

SAS-3.0

16 TB

512e

4 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

MARKING

5 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

Title Region

(Underwriters Laboratories)

USA

CSA

(Canadian Standar d Associati on)

Canada

TÜV

(Technischer Überwachungs Verein)

Germany

BSMI

(Bureau of Standards, Metrology and Inspection)

Taiwan

(Korea Certification)

Korea

ACMA

(Australian Communications and Media Authority)

Australia

(Note) Marks of KC

Made in Japan

Made in Philippines

SAFETY / EMC STANDARDS

MG08ACA16T A/E/AY/EY / MG08ACP16T A/E

R-R-T48-MG08ACA16TE

TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

2018-12

TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

MG08ACA16T A/E/AY/EY / MG08ACP16T A/E

R-R-T48-MG08ACA16TE

TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

2018-12

TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION

MG08SCA16T A/E/A Y/EY , MG08SCP16T A/E

R-R-T48-MG08SCA16TE

TOSHIBA ELECTRONIC DEVICES & STOR AGE CORPORATION

2018-12

TOSHIBA ELECTRONIC DEVICES & STOR AGE CORPORATION

MG08SCA16T A/E/A Y/EY , MG08SCP16T A/E

R-R-T48-MG08SCA16TE

TOSHIBA ELECTRONIC DEVICES & STOR AGE CORPORATION

2018-12

TOSHIBA ELECTRONIC DEVICES & STOR AGE CORPORATION

6 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

MECHANIC AL SPECIFICATIONS

[Unit: mm]

Item Specification

Width (Max)

101.85 mm

Height (Max) 26.1 mm

Length (Max)

147.0 mm

Weight (Max.(Typ.))

720 g (694 g)

MG08SCA16T

7 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

[Unit: mm]

MG08ACA16T

8 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

INTERF ACE CONNE CTOR

SATA plug connector overview

SAS plug connector overview

9 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

INTERF ACE CONNE CTOR (SATA plug) SIGN AL ALLOCATION

Notice: This drive uses 5V and 12V power. 3.3V power is not used.

HDA (Head Disk Assembly) and DC ground (ground pins on interface) are connected electrically each other.

Segment Pin No. Pin Definition

Signal Segment

GND

Mate

A+

Differential Pair A from PHY (Device Rx+)

A-

Differential Pair A from PHY (Device Rx-)

GND

Mate

B-

Differential Pair B from PHY (Device Tx-)

B+

Differential Pair B from PHY (Device Tx+)

GND

Mate

Power Segment

P1 － (Unused)

P2 － (Unused)

PWDIS

Enter/Exit Power Disable (Option)

P4 GND 1st Mate

P5 GND

2nd Mate

P6 GND 2nd Mate

5 V Power Pre-Charge 2

Mate

P8 V5 5 V Power

P9 V5 5 V Power

P10 GND 2nd Mate

P11 Spin - Staggered Spin-up Mode Detect (Input)

ACT

- Activity LED Drive (Output)

P12 GND 1st Mate

P13 V12 12 V Power Pre-Charge 2nd Mate

P14

V12

12 V Power

P15

V12

12 V Power

10 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

INTERF ACE CONNE CTOR (SAS plug) SIGNAL ALLOCATION

(*1) Do not supply 3.3V power if POWER DISABLE feature is used.

(*2) The terminal P3 is used as POWER DISABLE control signal in SAS-3. This terminal connects with the GROUND or is an OPENED thing o n the host side when the

POWER DISABLE function is not used.

Segment Pin No. Pin Definition

Signal Segment

S1 GND GND for SAS Primary Port

S2 RP+ SAS Primary Port Receive (positive) sig nal

S3 RP- SAS Primary Port Receive (negative) signal

S4 GND GND for SAS Primary Port

S5 TP- SAS Primary Port Transmit (negative) signal

S6 TP+ SAS Primary Port Transmit (positive) signal

S7 GND GND for SAS Primary Port

S8 GND GND for SAS Secondary Port

S9 RS+ SAS Secondary Port Receive (positive) signal

S10 RS- SAS Secondary Port Receive (negative) signal

S11 GND GND for SAS Secondary Port

S12 TS- SAS Secondary Port Transmit (negative) signal

S13 TS+ SAS Secondary Port Tran smi t (posi tiv e) sign al

S14 GND GND for SAS Secondary Port

Power Segment

P1 (*1) Reserved Do not supply 3.3V power if POWER DISABLE

Function is used.

P2 (*1) Reserved

P3 (*2) POWER

DISABLE Power Disable Control input signal

P4 GND GROUND

GND

GROUND

P6 GND GROUND

P7 +5V-Charge Pre-charge pin for +5V

+5V

+5V power supply input

+5V

+5V power supply input

P10 GND GROUND

P11 READY LED READY LED output

P12 GND GROUND

P13 +12V-Charge Pre-charge pin for +12V

P14

+12V

+12V power supply input

P15

+12V

+12V power supply input

11 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

SATA COMMAND TABLE (Part 1)

Op-Code Command Name

78h ACCESSIBLE MAX ADDRESS CONFIGURATION

E5h/98h CHECK POWER MODE

92h DOWNLOAD MICROCODE

93h DOWNLOAD MICROCODE DMA

90h EXECUTE DIAGNOSTICS

E7h FLUSH CACHE

EAh FLUSH CACHE EXT

ECh IDENTIFY DEVICE

E3h/97h IDLE

E1h/95h IDLE IMMEDIATE

91h INITIALIZE DEVICE PARAMETERS

00h NOP

E4h READ BUFFER

C8h READ DMA

25h READ DMA EXT

60h READ FPDMA QUEUED

2Fh READ LOG EXT

47h READ LOG DMA EXT

C4h READ MULTIPLE

29h READ MULTIPLE EXT

20h READ SECTOR(S)

24h READ SECTOR(S) EXT

40h READ VERIFY SECTOR(S)

42h READ VERIFY SECTOR(S) EXT

12 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

SATA COMMAND TABLE (Part 2)

Op-Code Command Name

1xh RECALIBRATE

0Bh REQUEST SENSE DATA EXT

B4h SANITIZE DEVICE

F1h SECURITY SET PASSWORD

F2h SECURITY UNLOCK

F3h SECURITY ERASE PREPARE

F4h SECURITY ERASE UNIT

F5h SECURITY FREEZE LOCK

F6h SECURITY DISABLE PASSWORD

70h – 76h, 79h – 7Fh SEEK

77h SET DATE & TIME EXT

EFh SET FEATURES

C6h SET MULTIPLE MODE

E6h/99h SLEEP

B0h SMART Function Set

E2h/96h STANDBY

E0h/94h STANDBY IMMEDIATE

E8h WRITE BUFFER

CAh WRITE DMA

35h WRITE DMA EXT

3Dh WRITE DMA FUA EXT

61h WRITE FPDMA QUEUED

3Fh WRITE LOG EXT

57h WRITE LOG DMA EXT

C5h WRITE MULTIPLE

39h WRITE MULTIPLE EXT

CEh WRITE MULTIPLE FUA EXT

30h WRITE SECTOR(S)

34h WRITE SECTOR(S) EXT

45h WRITE UNCORRECTABLE EXT

3Ch WRITE VERIFY

13 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

SAS COMMAND TABLE (Pa rt 1)

Op-Code Command Name

00h

TEST UNIT READ Y

12h INQUIRY

25h READ CAPACITY (10)

9Eh/10h READ CAPACITY (16)

15h MODE SELECT (6)

55h MODE SELECT (10)

1Ah

MODE SENSE (6)

5Ah MODE SENSE (10)

01h REZERO UNIT

1Bh START/STOP UNIT

16h RESERVE (6)

56h RESERVE (10)

17h RELEASE (6)

57h RELEASE (10)

03h REQUEST SENSE

4Ch LOG SELECT

4Dh LOG SENSE

5Eh PERSISTENT RESERVE IN

5Fh PERSISTENT RESERVE OUT

A0h REPORT LUNS

A3h/05h

REPORT IDENTIFYING INFORMATION

A3h/0Ch REPORT SUPPORTED OPERATION CODES

A3h/0Dh REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS

A4h/06h

SET IDENTIFYING INFORMATION

A3h/0Fh REPORT TIMESTAMP

A4h/0Fh SE T TI MESTA MP

14 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

SAS COMMAND TABLE (Pa rt 2)

Op-Code Command Name

08h

READ (6)

28h READ (10)

A8h READ (12)

88h READ (16)

0Ah W RITE (6)

2Ah W RITE (10)

AAh

W RITE (12)

8Ah W RITE (16)

2Eh W RITE AND VERIFY (10)

AEh W RITE AND VERIFY (12)

8Eh W RITE AND VERIFY (16)

2Fh VERIFY (10)

AFh VERIFY (12)

8Fh VERIFY (16)

0Bh SEEK (6)

2Bh SEEK (10)

35h SYNCHRONIZE CACHE (10)

91h SYNCHRONIZE CACHE (16)

04h FORMAT UNIT

07h REASSIGN BLOCKS

37h

READ DEFECT DATA (10)

B7h READ DEFECT DATA (12)

1Dh SEND DIAGNOSTIC

1Ch

RECEIVE DIAGNOSTIC RESULTS

3Bh W RITE BUFFER

3Ch READ BUFFER (10)

9Bh READ BUFFER (16)

3Eh READ LONG (10)

9Eh/11h READ LONG (16)

3Fh WRITE LONG (10)

9Fh/11h WRITE LONG (16)

41h WRITE SAME (10)

93h

W RITE SAME (16)

48h SANITIZE (10)

15 / 15

Enterpris e Capacity HDD MG08 Series Product Manual

Rev. 01: September, 2019

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collecti vely ref erred t o as “TOSHIBA”.

Hardware, soft ware and systems described in this document are collec t i vel y referred to as “Product”.

• TOSHIBA reserves the right to make changes to the informat i on in this document and related Product without notic e.

• This document and any information herein may not be reproduced without pri or writt en permission from TOSHIBA. Even with TOSHIBA's

written permissi on, reproduc t i on is permissible only if reproduction is without alterati on/omission.

• Though TOSHIBA works continually to improve Product's quality and reliabili ty, Product can malfunction or fail. Customers a re

responsibl e for complyi ng with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimi ze risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury

or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or

incorporate t he Product into their own applicati ons, cust om ers must also ref er to and comply with (a) the latest versions of all rel evant

TOSHIBA information, including without limitati on, this document , the specifications, the data sheets and application notes for Product

and the precautions and conditi ons set fort h in the "TOSHIBA Semiconductor Rel i abi lit y Handbook" and (b) the inst ruct i ons for the

applicat i on with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or

applicat i ons, includi ng but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b)

evaluating and determ i ning the applic abi l ity of any inf ormati on cont ained in this document, or in charts, diagrams, programs, algorithms,

sample applic ation circui ts , or any other referenced docum ents; and (c) validating all operating parameters for such designs and

applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESI G N OR APPLIC ATIONS.

• PRODUCT IS NEI THE R INTENDE D NO R WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/O R RELI ABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH M AY

CAUSE LOSS OF HUMAN LIFE , BODILY INJURY, SERIOUS PROPE RTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Uni ntended Us e i ncludes, without

limitati on, equipm ent used in nuclear fac ili t i es, equipm ent used in the aerospace industry, lifesaving and/or life supporting medical

equipment, equipment us ed for automobi l es, trai ns, shi ps and other transportati on, t raffic signali ng equipment, equipment used to control

combustions or explosi ons, saf ety devices, elevat ors and esc al ators, and devices related to power plant. IF YOU USE PRODUCT FOR

UNINTENDED US E, TOSHIB A ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative or contact us via our website.

• Do not disassemble, anal yze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated int o any products or systems whose manufacture, us e, or sale is prohibit ed under any

applicable l aws or regulations.

• The information cont ai ned herein is presented onl y as guidance for Product use. No responsi bility is assumed by TOSHIBA f or any

infringement of patents or any other intellect ual property ri ght s of thi rd parties t hat may result f rom the use of Product. No license to any

intellect ual propert y right is granted by this document, whether express or implied, by estoppel or otherwise.

• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WH ATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRE CT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCL UDING

WITHOUT LIMITATION, L O SS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS I NTERRUPTIO N AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCH ANTABILITY, FITNESS F O R A PARTICULAR

PURPOSE , ACCURACY OF INFORMATION, OR NONI NF RINGEMENT.

• Do not use or otherwise make available Product or related software or tec hnol ogy for any milit ary purposes, incl udi ng without limitation,

for the design, development, use, stock pili ng or manufact uri ng of nuclear, chemical, or biological weapons or miss ile t echnol ogy product s

(mass destructi on weapons). Produc t and related software and technology may be controlled under the applicable export laws and

regulations i ncludi ng, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export A dm i ni st ration

Regulations . Export and re-export of Product or related software or technology are strict l y prohibit ed except in compli ance with all

applicable export laws and regulat ions .

• Product may include products subject to foreign exchange and f oreign trade control l aws.

• Please contact your TOSHIBA s ales represent ati ve for detai ls as to environmental matters such as the RoHS compatibi l ity of Product .

Please use Product in compliance with all appli cable laws and regulations that regulate the inclusion or use of controlled substances,

including without limi t ation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIAN C E WITH APPLICABLE LAWS AND REGULATIONS.

https://toshiba.semicon-storage.com/