Table of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Customizing Your Phone
- General Settings
- Audio Settings
- Contact Management
- Call History Management
- Search Source List in Dialing
- System Customizations
- System Applications
- Basic Phone Features
- Placing Calls
- Answering Calls
- Audio-only/Video Selection
- Ending Calls
- Performing Operations during a Call
- Changing Video Call Settings
- Redialing Numbers
- Recent Call In Dialing
- Auto Answer
- Auto Redial
- Call Completion
- Recall
- Call Mute/Un-mute
- Call Hold/Resume
- Do Not Disturb (DND)
- Call Forward
- Call Transfer
- Call Waiting
- Conference
- Call Park/Retrieve
- Call Pickup
- Anonymous Call
- Anonymous Call Rejection
- Advanced Phone Features
- Appendix A - Time Zones
- Index
Yealink SIP-T58W PRO User Manual
Displayed below is the user manual for SIP-T58W PRO by Yealink which is a product in the IP Phones category. This manual has pages.
Related Manuals
Copyright
Copyright © 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY
Copyright © 2017 Yealink (Xiamen) Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,
photocopying, recording, or otherwise, for any purpose, without the express written permission of
Yealink (Xiamen) Network Technology CO., LTD. Under the law, reproducing includes translating into
another language or format.
When this publication is made available on media, Yealink (Xiamen) Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private use
but not for redistribution. No parts of this publication may be subject to alteration, modification or
commercial use. Yealink (Xiamen) Network Technology CO., LTD. will not be liable for any damages
arising from use of an illegally modified or altered publication.
Trademarks
Yealink®, the logo and the name and marks is trademark of Yealink (Xiamen) Network Technology CO.,
LTD, which are registered legally in China, the United States, EU (European Union) and other countries.
All other trademarks belong to their respective owners. Without Yealink’s express written permission,
recipient shall not reproduce or transmit any portion hereof in any form or by any means, with any
purpose other than personal use.
Warranty
(1) Warranty
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE SUBJECT TO
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS
GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.
(2) Disclaimer
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink (Xiamen) Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential damages in
connection with the furnishing, performance, or use of this guide.
(3) Limitation of Liability
Yealink and/or its respective suppliers are not responsible for the suitability of the information contained
in this document for any reason. The information is provided “as is”, and Yealink does not provide any
warranty and is subject to change without notice. All risks other than risks caused by use of the
information are borne by the recipient. In no event, even if Yealink has been suggested the occurrence of
damages that are direct, consequential, incidental, special, punitive or whatsoever (Including but not
limited to loss of business profit, business interruption or loss of business information), shall not be liable
for these damages.
End User License Agreement
This End User License Agreement ("EULA") is a legal agreement between you and Yealink. By installing,
copying or otherwise using the Products, you: (1) agree to be bounded by the terms of this EULA, (2) you
are the owner or an authorized user of the device, and (3) you represent and warrant that you have the
right, authority and capacity to enter into this agreement and to abide by all its terms and conditions, just
as if you had signed it. The EULA for this product is available on the Yealink Support page for the product.
Patent Information
China, the United States, EU (European Union) and other countries are protecting one or more patents of
accompanying products and/or patents being applied by Yealink.
Customer Feedback
We are striving to improve our documentation quality and we appreciate your feedback. Email your
opinions and comments to DocsFeedback@yealink.com.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents,
and more. For better service, we sincerely recommend you to use Yealink Ticketing system
(https://ticket.yealink.com) to submit all your technical issues.
GNU GPL INFORMATION
Yealink SIP-T58V/A smart media phone firmware contains third-party software under the GNU General Public License
(GPL). Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and
conditions of the license.
The original GPL license, source code of components licensed under GPL and used in Yealink products can be
downloaded online:
http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293.
About This Guide
v
About This Guide
Thank you for choosing the SIP-T58V/SIP-T58A (hereinafter referred to as SIP-T58V/A) IP phone,
a smart media phone for which is exquisitely designed to provide business telephony features,
such as Call Hold, Call Transfer, Busy Lamp Field, Call Recording, Multicast Paging and
Conference over an IP network. SIP-T58V/A is a smart media phone with a 7 inch capacitive
touch screen that runs on Android OS version 5.1.1. The difference between the SIP-T58V and
SIP-T58A smart media phones is that the Yealink USB camera CAM50 is an optional accessory
for the SIP-T58A IP phone. With the CAM50, you can easily turn your SIP-T58A into a video
phone.
This guide provides everything you need to quickly use your new phone. First, verify with your
system administrator that the IP network is ready for phone configuration. Also be sure to read
the Packaging Contents section in this guide before you set up and use the SIP-T58V/A smart
media phone.
Read the
Yealink Products Regulatory Notices guide
for all regulatory and safety guidance.
In This Guide
Topics provided in this guide include:
Chapter 1 Overview
Chapter 2 Getting Started
Chapter 3 Customizing Your Phone
Chapter 4 System Applications
Chapter 5 Basic Phone Features
Chapter 6 Advanced Phone Features
Summary of Changes
This section describes the changes to this guide for each release and guide version.
Changes for Release 80, Guide Version 80.40
The following sections are new for this versions:
Audio-only/Video Selection on page 268
Automatic Call Distribution (ACD) on page 358
Table of Contents
vii
Table of Contents
About This Guide .......................................................................... v
In This Guide ............................................................................................................................................................. v
Summary of Changes ............................................................................................................................................ v
Changes for Release 80, Guide Version 80.40 ........................................................................................ v
Table of Contents ........................................................................ vii
Overview ...................................................................................... 13
Hardware Component Instructions .............................................................................................................. 13
Icon Instructions ................................................................................................................................................... 16
Feature Status Icons........................................................................................................................................16
Line Key Icons ....................................................................................................................................................17
Other Icons .........................................................................................................................................................21
LED Instructions .................................................................................................................................................... 22
User Interfaces ...................................................................................................................................................... 23
Phone User Interface ......................................................................................................................................23
Web User Interface..........................................................................................................................................23
Documentations ................................................................................................................................................... 27
Getting Started ............................................................................ 29
Packaging Contents ............................................................................................................................................ 29
Optional Accessories ......................................................................................................................................31
Phone Installation ................................................................................................................................................ 31
Network Connection ........................................................................................................................................... 36
Connecting to the Wired Network............................................................................................................36
Connecting to the Wireless Network .......................................................................................................36
Phone Initialization .............................................................................................................................................. 36
Registration ............................................................................................................................................................ 37
Using the Touch Screen .................................................................................................................................... 37
Idle Screen ..........................................................................................................................................................37
Navigating Menus and Fields .....................................................................................................................41
Control Center/Notification Center ..........................................................................................................41
Configuration Screen Display .....................................................................................................................44
Dialing Screen Display ...................................................................................................................................45
Video Call Screen Display .............................................................................................................................47
Video Call Full-Screen Display (Both Far- and Near-Site Videos Exist) ......................................49
User Guide for SIP-T58V/A Smart Media Phone
viii
Entering Data and Editing Fields.................................................................................................................... 50
Using the Onscreen Keyboard ....................................................................................................................51
Using the Phone Keypad and Onscreen Dial Pad ...............................................................................55
Phone Status .......................................................................................................................................................... 55
Basic Network Settings ...................................................................................................................................... 58
Wireless Network Settings ............................................................................................................................... 60
Connecting to the Wireless Network .......................................................................................................60
Viewing the Connected Wireless Network Information ...................................................................67
Disconnecting the Wireless Network Connection ..............................................................................67
Disabling Wi-Fi Feature .................................................................................................................................68
Customizing Your Phone ............................................................ 71
General Settings ................................................................................................................................................... 71
Wallpaper ............................................................................................................................................................71
Screen Saver.......................................................................................................................................................76
Power Saving .....................................................................................................................................................79
Backlight ..............................................................................................................................................................82
Language.............................................................................................................................................................84
Input Method ....................................................................................................................................................85
Time & Date .......................................................................................................................................................87
Administrator Password ................................................................................................................................90
Key As Send .......................................................................................................................................................90
Phone Lock .........................................................................................................................................................91
Audio Settings ....................................................................................................................................................... 94
Volume .................................................................................................................................................................94
Ring Tones ..........................................................................................................................................................97
Key Tone ..............................................................................................................................................................99
Touch Sounds ................................................................................................................................................. 100
Notification Sound ....................................................................................................................................... 101
Silent Mode ..................................................................................................................................................... 101
Contact Management ...................................................................................................................................... 102
Local Directory ............................................................................................................................................... 103
Blacklist ............................................................................................................................................................. 120
Remote Phone Book .................................................................................................................................... 121
Mobile Contacts ............................................................................................................................................ 123
Call History Management ............................................................................................................................... 126
Viewing History Records ............................................................................................................................ 126
Placing a Call from History Records ...................................................................................................... 127
Adding a Contact to the Blacklist ........................................................................................................... 128
Deleting History Records ........................................................................................................................... 129
Disabling History Records ......................................................................................................................... 131
Search Source List in Dialing ......................................................................................................................... 131
System Customizations.................................................................................................................................... 133
Headset Use .................................................................................................................................................... 133
Table of Contents
ix
Bluetooth Headset........................................................................................................................................ 136
Bluetooth-Enabled Mobile Phone .......................................................................................................... 143
DSS Keys ........................................................................................................................................................... 151
Account Management ................................................................................................................................ 168
Dial Plan ............................................................................................................................................................ 171
Emergency Number ..................................................................................................................................... 177
Live Dialpad ..................................................................................................................................................... 177
Hotline ............................................................................................................................................................... 178
System Applications ................................................................. 181
Managing Applications and Widgets......................................................................................................... 181
Adding a Widget to the Idle Screen ...................................................................................................... 181
Resizing a Widget ......................................................................................................................................... 183
Moving an Application or Widget.......................................................................................................... 184
Removing a Widget from the Idle Screen ........................................................................................... 185
Creating a Folder .......................................................................................................................................... 185
Managing Running Applications ................................................................................................................. 188
APP Accounts....................................................................................................................................................... 188
Adding APP Accounts ................................................................................................................................. 188
Syncing APP Account Information ......................................................................................................... 192
Removing APP Accounts ........................................................................................................................... 194
FileManager.......................................................................................................................................................... 195
Viewing Files ................................................................................................................................................... 196
Searching Files ............................................................................................................................................... 199
Copying Files .................................................................................................................................................. 200
Cutting Files (Moving Files)....................................................................................................................... 202
Deleting Files .................................................................................................................................................. 203
Sharing Pictures/Videos/Audios ............................................................................................................. 204
Gallery ..................................................................................................................................................................... 208
Viewing Pictures/Videos ............................................................................................................................ 209
Editing Pictures .............................................................................................................................................. 212
Setting a Picture as Wallpaper ................................................................................................................ 213
Printing Pictures ............................................................................................................................................ 215
Viewing Detail Information of the Pictures/Videos ......................................................................... 215
Deleting Pictures/Videos ........................................................................................................................... 217
Taking a Picture/Video ............................................................................................................................... 218
Sharing Pictures/Videos ............................................................................................................................. 219
Recorder ................................................................................................................................................................ 223
Recording Audios ......................................................................................................................................... 224
Managing Recorded Audios ..................................................................................................................... 225
Camera ................................................................................................................................................................... 228
Taking Pictures ............................................................................................................................................... 229
Recording Videos .......................................................................................................................................... 229
Camera Settings ............................................................................................................................................ 230
User Guide for SIP-T58V/A Smart Media Phone
x
Email ........................................................................................................................................................................ 232
Signing In Email ............................................................................................................................................. 232
Sending Emails ............................................................................................................................................... 232
Reading Emails ............................................................................................................................................... 234
Deleting Emails .............................................................................................................................................. 235
Email Options ................................................................................................................................................. 236
Multiple Email Accounts ............................................................................................................................ 237
Email Widget .................................................................................................................................................. 238
Sending Files via Email................................................................................................................................ 239
Browser .................................................................................................................................................................. 239
Browsing a Web Page ................................................................................................................................. 239
Managing Bookmarks ................................................................................................................................. 240
Setting a Home Page .................................................................................................................................. 244
Clearing the Navigation History.............................................................................................................. 246
Modifying Browser Settings ..................................................................................................................... 247
Calendar ................................................................................................................................................................. 247
Signing In Calendar ...................................................................................................................................... 248
Creating an Event.......................................................................................................................................... 249
Checking Events ............................................................................................................................................ 249
Modifying the Calendar Settings ............................................................................................................ 251
Calculator .............................................................................................................................................................. 251
Clock........................................................................................................................................................................ 252
Alarm ................................................................................................................................................................. 252
Clock .................................................................................................................................................................. 256
Timer .................................................................................................................................................................. 259
Stopwatch ........................................................................................................................................................ 260
Basic Phone Features ................................................................ 263
Placing Calls ......................................................................................................................................................... 264
Answering Calls ................................................................................................................................................... 267
Answering When Not in Another Call .................................................................................................. 267
Answering When in Another Call ........................................................................................................... 268
Audio-only/Video Selection .......................................................................................................................... 268
Choosing to Place an Audio-only/Video Call .................................................................................... 269
Choosing to Answer the Video Call with Audio-only/Video ....................................................... 269
Ending Calls .......................................................................................................................................................... 270
Performing Operations during a Call ......................................................................................................... 270
Going to the Idle Screen during a Call ................................................................................................. 271
Returning to the Talking Screen ............................................................................................................. 272
Changing Video Call Settings ....................................................................................................................... 272
Stopping Transmitting Video during a Call ........................................................................................ 272
Changing the Video Layout during Calls............................................................................................. 273
Previewing the Near-Site Video .............................................................................................................. 277
Redialing Numbers ............................................................................................................................................ 277
Table of Contents
xi
Recent Call In Dialing ....................................................................................................................................... 277
Auto Answer ......................................................................................................................................................... 279
Auto Redial ........................................................................................................................................................... 280
Call Completion .................................................................................................................................................. 282
Recall ....................................................................................................................................................................... 283
Call Mute/Un-mute ........................................................................................................................................... 284
Call Hold/Resume .............................................................................................................................................. 286
Do Not Disturb (DND) ...................................................................................................................................... 287
Call Forward ......................................................................................................................................................... 292
Static Forwarding .......................................................................................................................................... 293
Dynamic Forwarding ................................................................................................................................... 303
Call Transfer.......................................................................................................................................................... 304
Blind Transfer .................................................................................................................................................. 304
Semi-Attended Transfer ............................................................................................................................. 306
Attended Transfer ......................................................................................................................................... 307
Call Waiting .......................................................................................................................................................... 308
Conference ........................................................................................................................................................... 309
Local Conference .......................................................................................................................................... 309
Network Conference.................................................................................................................................... 312
Call Park/Retrieve ............................................................................................................................................... 314
FAC Mode ........................................................................................................................................................ 314
Transfer Mode ................................................................................................................................................ 317
Call Pickup ............................................................................................................................................................ 319
Directed Call Pickup ..................................................................................................................................... 319
Group Call Pickup ......................................................................................................................................... 321
Anonymous Call ................................................................................................................................................. 322
Anonymous Call Rejection ............................................................................................................................. 323
Advanced Phone Features ........................................................ 327
Busy Lamp Field (BLF) ....................................................................................................................................... 327
Configuring the BLF Feature on the Phone ........................................................................................ 327
Using BLF Feature on the Phone ............................................................................................................ 331
BLF List ................................................................................................................................................................... 333
Screenshot ............................................................................................................................................................ 335
Call Recording ..................................................................................................................................................... 337
Call and Conference Recording Using a Softkey.............................................................................. 337
Call Recording Using a Record Key ....................................................................................................... 340
Hot Desking ......................................................................................................................................................... 343
Intercom ................................................................................................................................................................ 345
Configuring the Intercom Feature on the Phone ............................................................................. 345
Using Intercom Feature on the Phone ................................................................................................. 348
Multicast Paging ................................................................................................................................................. 349
Sending RTP Stream .................................................................................................................................... 349
Receiving RTP Stream ................................................................................................................................. 354
User Guide for SIP-T58V/A Smart Media Phone
xii
Using Multicast Paging ............................................................................................................................... 356
Music on Hold ..................................................................................................................................................... 357
Automatic Call Distribution (ACD) .............................................................................................................. 358
Shared Call Appearance (SCA) ...................................................................................................................... 359
Configuring SCA Feature on the IP Phone ......................................................................................... 361
Using SCA Feature on the IP Phone ...................................................................................................... 368
Message ................................................................................................................................................................. 376
Video/Voice Mail ........................................................................................................................................... 376
Message Waiting Indicator (MWI) ......................................................................................................... 378
Appendix A - Time Zones ......................................................... 381
Index .......................................................................................... 383
Overview
13
Overview
This chapter provides the overview of the SIP-T58V/A smart media phone. Topics include:
Hardware Component Instructions
Icon Instructions
LED Instructions
User Interfaces
Documentations
If you require additional information or assistance with your new phone, contact your system
administrator.
Hardware Component Instructions
The main hardware components of the phone are the touch screen, the keypad and the USB
camera CAM50.
User Guide for SIP-T58V/A Smart Media Phone
14
Hardware component instructions of the phone are:
Item
Description
①
Power Indicator LED
Indicates call status, message status and phone’s system
status.
• Receives an incoming call—Fast-flashing
• Receives a voice mail—Slow-flashing
②
Touch Screen
7 inch (1024 x 600) capacitive (5 point) touch screen. Tap to
select and highlight screen items. The IP phone supports
three idle screens by default.
Shows information about calls, messages, time, date and
other relevant data:
• Default account
• Call information—caller ID, call duration
• Icons (for example, )
• Missed call list or second incoming caller information
• Prompt text (for example, “Save successfully!”)
• Time and date
③
HEADSET Key
Toggles and indicates the headset mode. The key LED
illuminates solid green when headset mode is activated.
④
MUTE Key
Toggles and indicates mute feature. The key LED illuminates
solid red when the call is muted.
Overview
15
Item
Description
⑤
REDIAL Key
Redials a previously dialed number.
⑥
Speakerphone Key
Toggles and indicates the hands-free (speakerphone) mode.
The key LED illuminates solid green when the hands-free
(speakerphone) mode is activated.
⑦
TRANSFER Key
Transfers a call to another party.
⑧
HOLD Key
Places a call on hold or resumes a held call.
⑨
MESSAGE Key
• Accesses voice mails.
• Captures screenshots during a video call.
⑩
Volume Key
Adjusts the volume of the handset, headset, speaker, ringer
or media.
⑪
Keypad
Provides the digits and special characters in
context-sensitive applications.
⑫
Speaker
Provides hands-free (speakerphone) audio output.
⑬
Reversible Tab
Secures the handset in the handset cradle when the IP
phone is mounted vertically. For more information on how
to adjust the reversible tab, refer to
Yealink Wall Mount
Quick Installation Guide for Yealink IP Phones
.
⑭
Hookswitch
• Picking up the handset from the handset cradle, the
hookswitch bounces and the phone connects to the line.
• Laying the handset down on the handset cradle, the phone
disconnects from the line.
⑮
Camera Lens
2 Mega-pixel camera. Provides near-site video. The better
distance between camera and images you want to capture
should be in the range of 0.35 meters (1 foot) to 2 meters (6
feet).
⑯
Camera Indicator LED
Indicates video call status and camera status.
• Receives a video call—Flashing green
• The camera is inserted and detected successfully on the
phone—Solid green
⑰
Shutter Switch
Covers and uncovers the camera. When the camera is
switched off, the video image is black.
⑱
USB2.0 Port
Allows you to connect an optional USB flash
drive/EXP50/USB headset to your phone.
User Guide for SIP-T58V/A Smart Media Phone
16
Icon Instructions
Feature Status Icons
Icons appearing on the status bar are described in the following table:
Icons
Description
Wired network is unavailable
Hands-free (speakerphone) mode
Handset mode
Headset mode
Voice Mail
Auto Answer
Do Not Disturb
Call Forward
Silent mode
Camera is not detected
Keep Mute
Phone Lock
Missed Calls
Bluetooth mode is on
Bluetooth headset is both paired and connected
Bluetooth-Enabled mobile phone is both paired and
connected
Wi-Fi mode is on
Overview
17
Icons
Description
Wi-Fi is connected successfully and the signal strength
is weak to strong
The USB flash drive is detected
Screenshot captured
Downloading file
Uploading file
Upcoming alarm
Unread email
Warning
Line Key Icons
Icon indicator (associated with line key features):
Icons
Description
Hold/Public Hold
Private Hold
DND
Voice Mail
Direct Pickup
Group Pickup
DTMF
Prefix
LDAP
Local Group
XML Group
XML Browser
Conference
User Guide for SIP-T58V/A Smart Media Phone
18
Icons
Description
Forward
Transfer
ReCall
Record
URL Record
Recording starts successfully (Record/URL Record)
Multicast Paging
Group Listening
Paging List
Hot Desking
Zero Touch
URL
Phone Lock
Directory
Speed Dial
Icon indicator (associated with line)
Icons
Description
The private line registers successfully
Register failed
(Flashing)
Registering
The shared line registers successfully
DND is enabled on this line
Call forward is enabled on this line
Overview
19
Icon indicator (associated with mobile account)
Icons
Description
Mobile Account (Bluetooth-Enabled mobile phone is
both paired and connected)
Mobile Account (Bluetooth-Enabled mobile phone fails
to connect)
(Flashing)
Mobile Account (Bluetooth-Enabled mobile phone is
connecting)
Icon indicator (associated with call park/retrieve park)
Icons
Description
Call Park (Park successfully; Call park idle state)
Call Park (Park failed)
Call Park (Call park ringing state)
Retrieve Park
Icon indicator (associated with BLF/BLF List)
Icons
Description
BLF/BLF list idle state
(Flashing)
BLF/BLF list ringing state
(Flashing)
BLF/BLF list callout state
BLF/BLF list talking state
BLF hold state
BLF list call park state
BLF/BLF list failed state
User Guide for SIP-T58V/A Smart Media Phone
20
Icon indicator (associated with Intercom)
Icons
Description
Intercom idle state
Intercom ringing state
Callout
Intercom callout state
Talking
Intercom talking state
Intercom failed state
Icon indicator (associated with ACD)
Icon
Description
Log in the ACD system
The ACD status is available
The ACD state is Wrap up
The ACD status is unavailable
Log out of the ACD system
Icon indicator (associated with a shared line)
The local SCA phone indicates the phone is involved in an SCA call, while the monitoring SCA
phone indicates the phone is not involved in the SCA call.
Icon
Description
The shared line is idle.
(for monitoring SCA phone)
The shared line is seized.
(Flashing)
The shared line receives an incoming call.
Overview
21
Icon
Description
(Flashing)
The shared line is dialing.
The shared line is in conversation.
The shared line conversation is placed on public
hold.
(for local SCA phone)
(for monitoring SCA phone)
The shared line conversation is placed on private
hold.
The shared line conversation is barged in by the
other shared line party.
For a multi-party call, all the shared line parties
participating in this call place the shared line
conversation on hold.
Other Icons
Icon indicator (associated with an active call)
Icon
Description
Call Hold (video)
Call Hold (audio-only)
Call Mute
Call is encrypted
Icon indicator (associated with call recording)
Icons
Description
Recording box is full (Using a record key)
A call cannot be recorded (Using a record key)
User Guide for SIP-T58V/A Smart Media Phone
22
Icons
Description
Recording starts successfully (Using a record key)
Recording cannot be started (Using a record key)
Recording cannot be stopped (Using a record key)
Icon indicator (associated with call history)
Icons
Description
Received Calls
Placed Calls
Missed Calls
Forwarded Calls
Icon indicator (associated with contact)
Icons
Description
The default local caller photo and local contact icon
The default mobile caller photo and mobile contacts
icon
LED Instructions
Power Indicator LED
LED Status
Description
Solid red
The phone is initializing.
Fast-flashing red
The phone is ringing.
Slow-flashing red
The phone receives a video/voice mail.
Off
The phone is powered off.
The phone is idle.
The phone is busy.
The call is placed on hold or is held.
The call is muted.
Note
The above introduces the default power indicator LED status. The status of the power indicator
LED is configurable via web user interface. For more information, refer to
Yealink_SIP-T5_Series_CP960_Smart_Media_Phones_Administrator_Guide.
Overview
23
Camera Indicator LED
LED Status
Description
Solid green
The phone is powered on and the camera is properly
connected to the phone.
The camera is idle.
The phone receives an audio-only call.
Flashing green
The phone receives a video call.
Solid red
There is an active video call.
The video call is muted.
The video call is held.
Slow-flashing red
The shutter switch is open, but the near-site video is
stopped transmitting during a video call.
The video call is placed on hold.
Off
The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.
User Interfaces
Two ways to customize configurations of your SIP-T58V/A smart media phone:
The user interface on the IP phone.
The user interface in a web browser on your PC.
The hardware components keypad and touch screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on
the phone. In addition, you can use the web user interface to access all configuration settings. In
many cases, it is possible to use either the phone user interface and/or the web user interface
interchangeably. However, in some cases, it is only possible to use one or the other interface to
operate the phone and change settings.
Phone User Interface
You can swipe down from the top of the screen or swipe left/right to go to the second idle
screen and then tap Settings to customize your phone. The Advanced option is only accessible
to the administrator, and the default administrator password is “admin” (case-sensitive). For
more information on customizing your phone with the available options via phone user
interface, refer to Customizing Your Phone on page 71.
Web User Interface
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
User Guide for SIP-T58V/A Smart Media Phone
24
new phone. To obtain the IP address, swipe down from the top of the screen or swipe left/right
to go to the second idle screen and then tap Settings->Status on the phone. Enter the IP
address (e.g., http://192.168.0.10 or 192.168.0.10 for IPv4; http://[2005:1:1:1:215:65ff:fe64:6e0a]
or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address bar of a web browser on your PC. The
default administrator user name and password are both “admin” (case-sensitive).
Note
The main options you can use to customize the IP phone via phone user interface and/or via
web user interface are listed in the following table:
Options
Phone User Interface
Web User Interface
Status
√
√
--IPv4
--MAC
--Wi-Fi MAC
--Firmware
--Network
--Phone
--Accounts
--Storage
×
Basic Phone Settings
--Wallpaper
√
√
--Screen Saver
√
×
--Power Saving
×
√
--Backlight
√
--Language
√
--Input Method
√
×
--Time & Date
√
√
--Administrator Password
√
--Key As Send
√
--Phone Lock
√
--Audio Settings
--Ring Tones
√
--Key Tone
√
--Touch Sounds
√
×
--Notification Sound
√
--Silent Mode
√
--Contact Management
√
--Local Directory
√
--Blacklist
√
--Remote Phone Book
×
The access to the Advanced settings of the Account or Network via web user interface may be
blocked by the web browser (e.g., Chrome, Firebox) if you have installed “Adblock Plus plugin”.
Overview
25
Options
Phone User Interface
Web User Interface
--Mobile Contacts
√
×
--Call History Management
√
√
--Search Source List in Dialing
×
--Headset Use
√
--Bluetooth Headset
√
--Bluetooth-Enabled Mobile Phone
√
--DSS Keys
√
--Account Management
√
--Dial Plan
×
--Emergency Number
×
--Live Dialpad
×
--Hotline
√
--APP Accounts
√
×
--FileManager
√
--Gallery
√
--Recorder
√
--Camera
√
--Email
√
×
--Browser
√
--Calendar
√
--Calculator
√
--Clock
√
Basic Call Features
√
--Recent Call In Dialing
×
--Auto Answer
√
--Auto Redial
√
--Call Completion
√
--ReCall
√
--Do Not Disturb (DND)
√
--Call Forward
√
--Call Transfer
√
--Call Waiting
√
--Conference
√
--Call Park
√
--Call Pickup
√
--Anonymous Call
√
--Anonymous Call Rejection
√
Advanced Phone Features
√
--Busy Lamp Field (BLF)
√
--BLF List
×
--Call Recording
√
User Guide for SIP-T58V/A Smart Media Phone
26
Options
Phone User Interface
Web User Interface
--Hot Desking
√
--Intercom
√
--Multicast Paging
×
--Music on Hold
×
--Shared Call Appearance (SCA)
×
--Automatic Call Distribution (ACD)
√
--Message
√
SIP Account
√
--User Options
--Activation
√
--Label
√
--Display Name
√
--Register Name
√
--User Name
√
--Password
√
--Server Options
--SIP Server1/2
√
--Register Port
×
--Outbound Status
√
--Outbound Proxy1/2
√
--Proxy Fallback Interval
√
--NAT Status
√
Note
The table above lists most of the feature options. Please refer to the relevant sections for more
information.
Overview
27
Documentations
The following table shows documentations available for the SIP-T58V/A smart media phone.
Name
Contents
Where found
Language
Quick Start Guide
Basic call features
and phone
customizations
In the package/On
the website
English/Chinese
User Guide
Phone/Web user
interface settings
Basic call features
and advanced
phone features
On the website
English/Chinese
Note
You can also download the latest documentations online:
http://support.yealink.com/documentFront/forwardToDocumentDetailPage.
User Guide for SIP-T58V/A Smart Media Phone
28
Getting Started
29
Getting Started
This chapter provides the following basic installation instructions and information for obtaining
the best performance with the SIP-T58V/A smart media phone. Topics include:
Packaging Contents
Phone Installation
Network Connection
Phone Initialization
Registration
Using the Touch Screen
Entering Data and Editing Fields
Phone Status
Basic Network Settings
Wireless Network Settings
If you require additional information or assistance with your new phone, contact your system
administrator.
Packaging Contents
The following components are included in your SIP-T58V/A smart media phone package:
SIP-T58V/A Smart Media Phone
User Guide for SIP-T58V/A Smart Media Phone
30
Phone Stand
Handset & Handset Cord
CAM50 (an optional accessory for the SIP-T58A)
Ethernet Cable (2m CAT5E FTP cable)
Quick Start Guide
Check the list before installation. If you find anything missing, contact your system
administrator.
Getting Started
31
Optional Accessories
The following items are optional accessories for your SIP-T58V/A smart media phone. You need
to purchase them separately if required.
Wall Mount Bracket
Power Adapter (5.5mm DC plug)
Headset YHS32/YHS33
Note
Phone Installation
If your phone is already installed, proceed to Phone Initialization on page 36.
This section introduces how to install the phone:
1) Insert the camera
2) Attach the stand
3) Adjust angle of the touch screen
4) Attach the optional wall mount bracket
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
User Guide for SIP-T58V/A Smart Media Phone
32
5) Connect the handset and optional headset
6) Connect the power
7) Connect the optional USB flash drive
1) Insert the camera
Note
2) Attach the stand
The camera is connected to the USB port on the top of the phone. And the IP phone only
supports the Yealink original USB camera CAM50. You should purchase it separately for SIP-T58A
smart media phone.
Getting Started
33
3) Adjust the angle of touch screen
4) Attach the optional wall mount bracket
Note
The reversible tab has a lip which allows the handset to stay on-hook when the IP phone is
mounted vertically. For more information, refer to
Yealink Wall Mount Quick Installation Guide
for Yealink IP Phones
.
User Guide for SIP-T58V/A Smart Media Phone
34
5) Connect the handset and optional headset
6) Connect the power
You have two options for power connections. Your system administrator will advise you which
one to use.
AC power (Optional)
Power over Ethernet (PoE)
AC Power (Optional)
To connect the AC power:
1. Connect the DC plug on the power adapter to the DC5V port on the phone and connect the
other end of the power adapter into an electrical power outlet.
Note
Power over Ethernet
With the included or a regular Ethernet cable, the SIP-T58V/A smart media phone can be
powered from a PoE-compliant switch or hub.
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the
third-party power adapter may cause the damage to the phone.
Getting Started
35
To connect the PoE:
1. Connect the Ethernet cable between the Internet port on the phone and an available port
on the in-line power switch/hub.
Note
7) Connect the optional USB flash drive
When you attach a USB flash drive to your phone, the touch screen will prompt “USB device
connected successfully!”, the icon will display on the status bar. You can access and
manage photo/video/audio files in USB flash drive by FileManager application. For more
information, refer to FileManager on page 195.
Note
The USB port (on the rear of the phone) can also be used to connect color-screen expansion
module EXP50 or USB headset. The SIP-T58V/A smart media phone officially supports certain
USB headset models. For more information, refer to
Tested headset list compatible with Yealink
IP Phone
.
For more information on how to use EXP50, refer to
Yealink EXP50 User Guide
. For more
information on how to use USB headset, refer to the documentation from the manufacturer.
If in-line power is provided, you don’t need to connect the phone to the power adapter. Make
sure the switch/hub is PoE-compliant.
Important! Do not remove power to the phone while it is updating firmware and configurations.
User Guide for SIP-T58V/A Smart Media Phone
36
Network Connection
You have two options for network connection. You can select one of them according to the
current office environment.
Connecting to the wired network
Connecting to the wireless network
Connecting to the Wired Network
You can connect your phone to a wired network.
Before connecting your phone to the wired network, it is important to note that the Wi-Fi
feature should be disabled. For more information, refer to Connecting to the Wireless Network
on page 36.
Note
Connecting to the Wireless Network
Yealink SIP-T58V/A smart media phone supports Wi-Fi feature. You can connect your phone to
a wireless network. The wireless network is more convenient and cost-effective than wired
network. The PC port is unavailable when using wireless network. For more information on how
to connect to a wireless network, refer to Wireless Network Settings on page 60.
Phone Initialization
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The touch screen
The phone can also share the network with another network device such as a PC (personal
computer). This is an optional connection. We recommend that you use the Ethernet cable
provided by Yealink. For more information on this function, contact your system administrator.
Getting Started
37
displays “Welcome Initializing…Please wait” during the initialization.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4 network
settings (e.g., IP address, subnet mask, default gateway address and DNS address) by default.
Note
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T58V/A smart media phone
supports up to 16 accounts. If your phone is not registered, you may have to register it. For
more information on how to register your phone, refer to Account Management on page 168.
Using the Touch Screen
Idle Screen
The SIP-T58V/A smart media phone supports multiple idle screens. You can swipe left or right to
switch among different idle screens. The IP phone supports three idle screens by default.
You can add a new idle screen by moving an application or widget to the right side of the third
idle screen. The idle screen will be deleted automatically if there is no application or widget on
the screen. For more information, refer to Managing Applications and Widgets on page 181.
If your network does not use DHCP, proceed to Basic Network Settings on page 58.
User Guide for SIP-T58V/A Smart Media Phone
38
The Home Screen
The home screen displays as below:
No.
Name
Description
1
Status Bar
Displays the phone’s default account, icons and time.
2
Time
The phone’s time is displayed on the right of the
status bar. For more information, refer to Time &
Date on page 87.
3
Icons
Icons are displayed in the middle of the status bar.
For more information, refer to Icon Instructions on
page 16.
4
Default account
The label of the default account is displayed on the
left of the status bar. For more information, refer to
Default Account on page 170.
If there is no account registered on the IP phone, this
field will display No Service.
5
Phone Dialer
Tap to enter the dialing screen. For more
information, refer to Dialing Screen Display on page
45.
6
Directory
Tap to enter the Directory screen and view contacts.
For more information, refer to Contact Management
on page 102.
7
History
Tap to enter the History screen and view call history.
For more information, refer to Call History
Management on page 126.
8
Wallpaper
Shows the specified wallpaper, which can be
customized. For more information, refer to
Getting Started
39
No.
Name
Description
Wallpaper on page 71.
9
Android Keys
: tap to go back to the previous screen.
: tap to return to the idle screen.
: tap to view and manage the list of recently
used applications.
10
Screen Indicator
Indicates which idle screen is displayed.
11
DSS Key
Tap to add a line key, and then line key list will be
displayed on the right of the home screen. For more
information, refer to DSS Keys on page 151.
12
Digital Clock Widget
Displays the phone’s time and date. For more
information, refer to Clock on page 252.
The Second Idle Screen
The second idle screen displays phone’s system applications by default.
No.
Application
Description
1
Settings
You can use this application to access phone settings
and features. You can also swipe down from the top
of the screen and then tap Settings to access phone
settings and features.
2
FileManager
You can use this application to manage files in
internal SD card as well as USB flash drive. For more
information, refer to FileManager on page 195.
3
Message
You can use this application to access the
video/voice mails or leave video/voice mails for
someone. For more information, refer to Message on
page 376.
4
Email
You can use this application to send and receive
emails. For more information, refer to Email on page
User Guide for SIP-T58V/A Smart Media Phone
40
No.
Application
Description
232.
5
Calendar
You can use this application as a reminder or to
manage and arrange your events. For more
information, refer to Calendar on page 247.
6
Camera
You can use this application to take pictures or
record videos. For more information, refer to Camera
on page 228.
7
Gallery
You can use this application to view photos and
videos. For more information, refer to Gallery on
page 208.
8
Recorder
You can use this application to record audio. For
more information, refer to Recorder on page 223.
9
Calculator
You can use this application to calculate. For more
information, refer to Calculator on page 251.
10
Browser
You can use this application to present and explore
content on the World Wide Web. For more
information, refer to Browser on page 239.
The Third Idle Screen
The third idle screen displays the calendar and email widgets by default.
No.
Widget
Description
1
Calendar Widget
Displays the data and upcoming events. For more
information, refer to Calendar on page 247.
2
Email Widget
Displays email list of the specified folder. For more
information, refer to Email on page 232.
Getting Started
41
Navigating Menus and Fields
To navigate menus and fields, you can:
Tap corresponding keys on the touch screen.
Tap menu items, fields, and arrows on the touch screen.
Press keys on the phone keypad.
To operate your phone using gestures, follow these tips:
Gesture
Action
Tap
Touch an item on the screen with your finger, and then
lift your finger.
Long Tap
Touch an item for about 2 seconds without lifting your
finger from the screen till an action occurs.
Swipe
Touch and move. When you want to scroll quickly, swipe
your finger across the screen, either up, down, left or
right.
Drag
Touch and hold, then move. To stop scrolling, stop the
dragging motion.
Pinch Open
Touch the screen with two or more fingers, and then
move the fingers away from each other (stretch).
Pinch Close
Touch the screen with two or more fingers, and then
move the fingers towards each other (pinch).
Control Center/Notification Center
Control center or notification center allows you to access common features or view important
notifications quickly.
User Guide for SIP-T58V/A Smart Media Phone
42
Swipe down from the top of the screen to enter the control center and the notification
center:
No.
Name
Description
1
Time and date
Display the phone’s time and date. For more information,
refer to Time & Date on page 87.
2
Control Center
Video
Tap to access Camera application when the
IP phone is idle. For more information, refer
to Camera on page 228.
Tap to stop transmitting video during a
video call. For more information, refer to
Stopping Transmitting Video during a Call
on page 272.
DND
Tap to turn on/off DND feature quickly. For
more information, refer to Do Not Disturb
(DND) on page 287.
FWD
Tap to enter Call Forward setting screen. For
more information, refer to Call Forward on
page 292.
Auto
Answer
Tap to enter Auto Answer setting screen. For
more information, refer to Auto Answer on
page 279.
Silent
Tap to turn on/off silent feature quickly.
Wi-Fi
Tap to turn on/off Wi-Fi feature quickly. For
more information, refer to Wireless Network
Settings on page 60.
Long tap to enter Wi-Fi setting screen.
Getting Started
43
No.
Name
Description
Bluetooth
Tap to turn on/off Bluetooth feature quickly.
For more information, refer to Bluetooth
Headset on page 136.
Long tap to enter Bluetooth setting screen.
Screenshot
Tap to capture a screenshot. For more
information, refer to Screenshot on page 335.
USB
Tap to access the FileManager application to
manage the files in the USB flash drive. For
more information, refer to FileManager on
page 195.
Settings
Tap to enter the Settings screen.
Backlight
Slider
Drag the slider to adjust the screen brightness
quickly. You can also enter the Backlight
setting screen to adjust the screen brightness.
For more information, refer to Backlight on
page 82.
3
Notification
Center
Tap Notification/Missed Calls/Voice Mail/Forwarded to
view the corresponding notification list.
Tap the desired notification message to view the details.
Swipe left or right to delete a specific notification.
Tap to delete all notifications.
4
Android Keys
: tap to go back to the previous screen.
: tap to return to the idle screen.
: tap to view and manage the list of recently used
applications.
You can swipe up from the bottom of the screen to hide this screen.
User Guide for SIP-T58V/A Smart Media Phone
44
Configuration Screen Display
No.
Name
Description
1
Title Area
Displays the title of the current menu screen.
2
Tap to accept the settings.
3
Configuration Area
Displays configuration items of the highlighted
menu item in the menu tree area.
4
Android Keys
: tap to go back to the previous screen.
: tap to return to the idle screen.
: tap to view and manage the list of recently
used applications.
5
Tap to go back to previous screen.
6
Menu Tree Area
• Displays menu items.
• Tap the desired menu item to enter the
corresponding configuration screen.
Getting Started
45
Dialing Screen Display
No.
Name
Description
1
Time
The phone’s time is displayed on the right of the
status bar. For more information, refer to Time &
Date on page 87.
2
Line Key List
The line key list displays 6 line keys by default.
You can drag up and down to scroll through the
line keys. Various features can be assigned to line
keys. Each line key can display the label and
indicate the status of the assigned feature.
Note: The line key list appears only if you have
added at least one line key.
3
Tap to unfold line key list and display all line
keys. For more information, refer to DSS Keys on
page 151.
4
Tap it or swipe right to hide the line key list.
5
Android Keys
: tap to go back to the idle screen.
: tap to return to the idle screen.
: tap to view and manage the list of recently
used applications.
6
Dial Pad
Tap the desired character(s) and then tap Send to
dial out the number.
7
Placed Calls List
You should enable the recent call in dialing
feature to view the placed calls list. For more
information, refer to Recent Call In Dialing on
User Guide for SIP-T58V/A Smart Media Phone
46
No.
Name
Description
page 277.
8
Talking Mode and Default
Account
• Shows which account and talking mode you are
using to make a call. The talking mode includes
handset, speakerphone or headset; you can
alternate among the three modes when making a
call.
• Tap to change the default account. For more
information, refer to Default Account on page
170.
9
Tap to go back to the idle screen.
10
Directory
Tap to enter the Directory screen and view
contacts.
11
History
Tap to enter the History screen and view call
history.
12
• Tap to delete the entered characters one by
one.
• Long tap to delete two or more characters.
13
Tap to display/hide the onscreen keyboard. For
more information, refer to Using the Onscreen
Keyboard on page 51.
Getting Started
47
Video Call Screen Display
No.
Name
Description
1
Time
The phone’s time is displayed on the right of the
status bar. For more information, refer to Time &
Date on page 87.
2
Line Key List
The line key list displays 6 line keys by default.
You can drag up and down to scroll through the
line keys. Various features can be assigned to line
keys. Each line key can display the label and
indicate the status of the assigned feature.
Note: The line key list appears only if you have
added at least one line key.
3
Tap to unfold line key list and display all line
keys. For more information, refer to DSS Keys on
page 151.
4
Tap it or swipe right to hide the line key list.
5
Full Screen
Tap to show the video on the phone in full
screen. Only the near site and far site are shown.
For more information on full screen, refer to
Video Call Full-Screen Display (Both Far- and
Near-Site Videos Exist) on page 49.
6
Soft Keys
• Label automatically to identify their
context-sensitive features.
• Swipe left to see other soft keys.
7
Far-Site Information
Shows the information (name or number) of the
User Guide for SIP-T58V/A Smart Media Phone
48
No.
Name
Description
far site.
8
Active Call Window
Shows the video of far site and near site.
By default, a small window (near site) is located
on the top-right of the touch screen, and a larger
window (far site) is centered in the middle of the
touch screen.
Note: If you do not connect the CAM50 to your
phone or turn off the near-site video during the
call, the IP phone will stop transmitting the
near-site video. For more information on turn off
the near-site video, refer to Stopping
Transmitting Video during a Call on page 272.
9
Call Duration Timer
Shows the duration time of current call.
10
Talking Mode
Shows that you are talking using the handset,
speakerphone or headset. You can alternate
among the three modes during calls.
11
Phone Dialer
Tap to enter the dialing screen. For more
information, refer to Dialing Screen Display on
page 45.
12
Directory
Tap to enter the Directory screen and view
contacts.
13
History
Tap to enter the History screen and view call
history.
14
• A number under the icon indicates the number
of call(s) on the phone. For example, 1 indicates
that there is a call on the phone.
• Tap to exit or return to the talking screen.
15
Android Keys
: tap to go back to the idle screen.
: tap to return to the idle screen.
: tap to view and manage the list of recently
used applications.
Getting Started
49
Video Call Full-Screen Display (Both Far- and Near-Site Videos
Exist)
From the video call screen, do one of the following to view full-screen video:
- Tap the big size image.
- Tap Full Screen.
User Guide for SIP-T58V/A Smart Media Phone
50
- The phone will enter the full screen automatically within 5 seconds during a call.
No.
Name
Description
1
Video Display Area
Shows video in different layout. For more
information, refer to Changing the Video Layout
during Calls on page 273.
Note: If you do not connect the CAM50 to your
phone or turn off the near-site video during the call,
the IP phone will stop transmitting the near-site
video. For more information on turn off the near-site
video, refer to Stopping Transmitting Video during a
Call on page 272.
2
Blank Area
Tap to exit the full-screen display.
3
Far-Site Information
Shows the information (name or number) of the far
site by default.
4
Tap to exit the full-screen display.
5
Call Duration Timer
Shows the duration time of current call.
6
Android Keys
: tap to exit the full-screen display.
: tap to return to the idle screen.
: tap to view and manage the list of recently
used applications.
Entering Data and Editing Fields
SIP-T58V/A smart media phone provides onscreen keyboard, phone keypad and onscreen dial
pad to enter data. Phone keypad and onscreen dial pad provide standard key layout, which
enable users to use existing or familiar key positions. You can enter data and edit fields using
Getting Started
51
the onscreen keyboard, phone keypad or onscreen dial pad.
Using the Onscreen Keyboard
Before using the onscreen keyboard to enter data, you need to know the function of the keys on
the onscreen keyboard. SIP-T58V/A smart media phone supports two kinds of input methods:
Android Keyboard (AOSP) – English (US) and Google Pinyin. For more information, refer to Input
Method on page 85.
Android Keyboard (AOSP) – English (US) Input Method
The English (US) input method supports multiple languages onscreen keyboard. The following
takes English keyboard of the English (US) input method as an example:
No.
Item
Description
1
26 English Letters
• Tap to enter letters.
• Long tap a key then slide to choose one of
the options to enter an alternate character.
2
Delete Key
• Tap to delete the entered characters one
by one.
• Long tap to delete two or more
characters.
3
Label
automatically
to identify the
context-sensiti
ve features.
Next Key
Tap to go to the next field.
Done Key
Tap to confirm the settings.
Send Key
Tap to dial out the number.
Go Key
Tap to browse the web page.
4
Tap to switch to the uppercase input mode.
5
Tap to switch to the numeric&symbolic
input mode.
6
Five Special Characters
Tap to enter the corresponding character.
7
Space Key
• Tap to enter spaces.
• Long tap to change input method.
User Guide for SIP-T58V/A Smart Media Phone
52
No.
Item
Description
8
Tap to access input options to configure
Input languages or Android Keyboard
Settings (AOSP). You can use AOSP to
configure Android keyboard including Input
languages, Auto-capitalization, Sound on
keypress and so on.
Tap to switch to the numeric&symbolic input mode as shown below:
No.
Item
Description
1
Numbers
• Tap to enter numbers.
• Long tap a key then slide to choose one
of the options to enter an alternate
character.
2
Delete Key
• Tap to delete the entered characters one
by one.
• Long tap to delete two or more
characters.
3
Label
automatically to
identify the
context-sensitiv
e features.
Next Key
Tap to go to the next field.
Done Key
Tap to confirm the settings.
Send Key
Tap to dial out the number.
Go Key
Tap to browse the web page.
4
Tap to switch to the symbolic input mode.
5
Tap to switch to the lowercase input
mode.
6
Space Key
• Tap to enter spaces.
• Long tap to change input method.
7
Special Characters
• Tap to enter special characters.
• Long tap a key then slide to choose one
of the options to enter an alternate
character.
Getting Started
53
Tap to switch to the symbolic input mode as shown below:
No.
Item
Description
1
Special Characters
• Tap to enter special characters.
• Long tap a key then slide to choose one of
the options to enter an alternate character.
2
Delete Key
• Tap to delete the entered characters one
by one.
• Long tap to delete two or more
characters.
3
Label
automatically
to identify the
context-sensiti
ve features.
Next Key
Tap to go to the next field.
Done Key
Tap to confirm the settings.
Send Key
Tap to dial out the number.
Go Key
Tap to browse the web page.
4
Tap to switch to the numeric&symbolic
input mode.
5
Tap to switch to the lowercase input mode.
6
Space Key
• Tap to enter spaces.
• Long tap to change input method.
Google Pinyin Input Method
You can use Google Pinyin input method to enter Chinese. For operating instructions on how to
use the Google Pinyin input method, refer to the operating instructions above.
User Guide for SIP-T58V/A Smart Media Phone
54
When you change the input method to Google Pinyin, the onscreen keyboard displays the
English input mode as shown below by default:
Tap to switch to the Chinese input mode as shown below:
Tap to switch to the numeric&symbolic input mode as shown below:
Tap to switch to the symbolic input mode as shown below:
The other things you need to know:
If you want to
Action
Position the cursor.
Tap to position.
Select all characters.
1) Long tap the entered character(s).
2) Do one of the following:
• Tap SELECT ALL on the top of the touch screen.
Getting Started
55
If you want to
Action
• Drag / to select all characters.
Cut/Copy characters.
1) Long tap the entered character(s).
2) Drag / to select the characters you want to
cut/copy.
3) Tap CUT/COPY on the top of the touch screen.
4) Long tap the desired field.
5) Tap PASTE.
Delete more characters at a
time.
• Long tap the entered character(s).
Drag / to select the characters you want to delete.
Tap .
• Long tap .
Replace characters.
1) Drag your finger to highlight the characters you want to
replace.
2) Tap the desired character.
Using the Phone Keypad and Onscreen Dial Pad
Instead of using the onscreen keyboard, you can also use the keypad on your phone or dial pad
on the dialing screen to enter data. The phone keypad and onscreen dial pad only provide digit
keys, # key and * key.
Note
Phone Status
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
General information (IP address, MAC address, Wi-Fi MAC address and firmware version)
Network status (IPv4 status or IPv6 status, IP mode, MAC address and Wi-Fi MAC address)
- IPv4 uses a 32-bit address.
- IPv6 is an updated version of the current Internet Protocol to meet the increased
demands for unique IP addresses, using a 128-bit address.
Phone status (product name, hardware version, firmware version, product ID, MAC address,
Wi-Fi MAC address, device certificate status and Android version)
Account status (register status of SIP accounts)
Storage information (internal storage, internal SD and USB storage)
When using the onscreen dial pad, you can tap to use the onscreen keyboard. For more
information, refer to Using the Onscreen Keyboard on page 51.
User Guide for SIP-T58V/A Smart Media Phone
56
The storage information is sorted and displayed with different categories. The following
table lists usage of each category:
Category
Usage
Apps
Display the memory cost of the application data and media content.
Cached data
Tap to clear cached data for all apps.
Pictures,
videos
Tap to view the pictures/videos by Gallery application.
Audio
Tap to open the file system of the storage. You can browse the file
system to view all audios in the internal SD card or USB flash drive.
Downloads
Display the memory cost of the downloaded files.
Misc.
Tap to display all folders on the IP phone. You can then select the folders
to be cleaned up.
The operating system and system applications occupy some storage space. Therefore, the actual
available space will be smaller than the nominal space. Updates on the operating system and
firmware version may cause changes to the available space.
To view the phone status via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Status.
3. Tap the desired item to view the desired information.
Note
You can view the device certificate status and storage information via phone user interface only.
Getting Started
57
To view the phone status via web user interface:
1. Open a web browser on your computer.
2. Enter the IP address in the browser’s address bar, and then press the Enter key.
(e.g., “http://192.168.0.10” for IPv4 or “http://[2005:1:1:1:215:65ff:fe64:6e0a]” for IPv6).
3. Enter the user name (admin) and password (admin) in the login page.
4. Click Confirm to login.
The phone status is displayed on the first page of the web user interface.
Note
If IP mode of the phone is configured as IPv4 & IPv6, you can enter either of them in the
browser’s address bar to view the phone status. IPv6 is not available on all servers. Contact
your system administrator for more information.
User Guide for SIP-T58V/A Smart Media Phone
58
Basic Network Settings
If your phone cannot contact a DHCP server for any reason, you need to configure network
settings manually. The IP phone can support either or both IPv4 and IPv6 addresses.
To configure the IP mode via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Network->WAN Port.
3. Tap the IP Mode field.
4. Tap the desired value (IPv4, IPv6 or IPv4 & IPv6) in the pop-up dialog box.
5. Tap to accept the change or to cancel.
You can configure a static IPv4 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv4 or IPv4 & IPv6.
To configure a static IPv4 address via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4.
3. Tap the Type field.
4. Tap Static IP in the pop-up dialog box.
Getting Started
59
5. Enter the desired value in the IP Address, Subnet Mask, Gateway, Primary DNS and
Secondary DNS field respectively.
6. Tap to accept the change or to cancel.
You can configure a static IPv6 address for the IP phone. Before configuring it, make sure that
the IP mode is configured as IPv6 or IPv4 & IPv6.
To configure a static IPv6 address via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv6.
3. Tap the Type field.
4. Tap Static IP in the pop-up dialog box.
5. Enter the desired value in the IP Address, IPv6 IP Prefix, Gateway, Primary DNS and
Secondary DNS field respectively.
6. Tap to accept the change or to cancel.
If you are using an xDSL modem for IPv4 network connection, you can connect your phone to
the Internet via PPPoE mode. Set the WAN port as a PPPoE port. The PPPoE port will perform a
PPP negotiation to obtain the IP address. Contact your system administrator for the PPPoE user
User Guide for SIP-T58V/A Smart Media Phone
60
name and password.
To configure PPPoE via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Network->WAN Port->IPv4.
3. Tap the Type field.
4. Tap PPPoE in the pop-up dialog box.
5. Enter the PPPoE user name and password in the corresponding fields.
6. Tap to accept the change or to cancel.
Note
Wireless Network Settings
Yealink SIP-T58V/A smart media phone supports Wi-Fi feature. The IP phone can be connected
to wireless network if Wi-Fi is available within the area. For more information, contact your
system administrator.
Note
Connecting to the Wireless Network
Three ways to connect SIP-T58V/A smart media phone to the wireless network:
Manually connect to an available wireless network
The wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters, contact your
system administrator.
Enabling Bluetooth may degrade your wireless network connection. For improved wireless
network performance, you should disable Bluetooth when it is not in use. For more information,
refer to Activating/Deactivating the Bluetooth Mode on page 136.
Getting Started
61
Wi-Fi Protected Setup (WPS)
Manually add a wireless network
When the phone is connected to a wireless network, the Wi-Fi icon will display on the status
bar. The Wi-Fi icon indicates the signal strength. The more green arcs you see, the stronger the
signal strength is. For more information, refer to Icon Instructions on page 16. And the Wi-Fi
label on the control center will change to the SSID of the connected wireless network.
Manually Connect to an Available Wireless Network
You can manually connect your phone to a wireless network.
To manually connect to an available wireless network via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Wi-Fi.
3. Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available wireless networks in your area.
4. (Optional.) To re-search the available network, tap and then tap Scan.
5. Tap the desired wireless network (SSID) to connect to it.
User Guide for SIP-T58V/A Smart Media Phone
62
6. If the network is secure, enter its password in the Password field.
Contact your network administrator for the Wi-Fi password.
You can do the following:
- Tap the Show password radio box to make the password visible.
- Tap the Show advanced options radio box to configure the HTTP proxy for Browser
application.
7. Tap Connect to connect to the wireless network.
Once the connection has completed successfully, the prompt “Connected” appears under
the corresponding SSID.
You can also swipe down from the top of the screen to enter the control center, and toggle
Wi-Fi on. The phone will automatically search for wireless network in your area, and try to
connect the wireless network that you have connected last time. If there are no available
wireless networks or the phone cannot connect the wireless network that you have
connected last time, you will get a notification “Wi-Fi networks available”. Swipe down from
the top of the screen to enter the notification center, tap the notification. Repeat steps 4 to
7 to connect to the desired wireless network.
Getting Started
63
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to push the WPS key on both the IP
phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a WPS PIN generated
randomly by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Wi-Fi.
3. Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available wireless networks in your area.
User Guide for SIP-T58V/A Smart Media Phone
64
4. Tap and then tap WPS.
The touch screen prompts “Press the Wi-Fi Protected Setup button on your router. It may
be called “WPS” or contain this symbol:”.
5. Long press the WPS key on your gateway/router.
Once WPS setup has completed successfully, the touch screen will prompt “Connected”.
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Wi-Fi.
3. Tap the On radio box in the Wi-Fi field.
The phone will automatically search for available wireless networks in your area.
Getting Started
65
4. Tap and then tap WPS-PIN.
The touch screen prompts “Enter pin XXX on your Wi-Fi router. The setup can take up to
two minutes to complete.”.
5. Note the PIN code.
6. Enter the gateway/router address in the address bar of a web browser on your PC
connected to the gateway/router.
7. Enter the user name and password in the login page.
8. Locate the WPS Wizard configuration menu.
9. Enter the PIN code in the field that allows you to setup wireless devices by using a PIN.
10. Click the corresponding button in the gateway/router’s web interface to search WPS
clients.
Once WPS setup has completed successfully, the touch screen will prompt “Connected”.
Note
Manually Add a Wireless Network
If your gateway/router has SSID broadcast disabled, it might not appear in the scanning results.
In that case, you must manually add a wireless network.
To add a wireless network:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Wi-Fi.
3. Tap the On radio box in the Wi-Fi field.
Contact your gateway/router provider for more information.
User Guide for SIP-T58V/A Smart Media Phone
66
4. Tap and then tap Add.
5. Enter the desired value in the Network SSID field.
6. Tap the Security field.
7. Tap the desired value.
- If you select WEP or WPA/WPA2 PSK:
1) Enter the password in the Password field.
- If you select 802.1x EAP:
1) Tap the EAP method field.
2) Tap the desired EAP method in the pop-up dialog box.
- If you select PEAP/TTLS:
a) Tap the Phase-2 authentication field.
b) Tap the desired Phase-2 authentication method in the pop-up dialog
box.
c) Enter the identity (username) in the Identity field.
d) Enter the anonymous identity (username) in the Anonymous identity
field (to be used as the unencrypted identity).
Getting Started
67
e) Enter the password in the Password field.
- If you select TLS:
a) Enter the username in the Identity field
- If you select PWD:
a) Enter the username in the Identity field.
b) Enter the password in the Password field.
8. You can do the following:
- Tap the Show password radio box to make the password visible.
- Tap the Show advanced options radio box to configure the HTTP proxy for Browser
application.
9. Tap Save to accept the change.
Viewing the Connected Wireless Network Information
To view the connected wireless network information:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Wi-Fi.
3. Tap Wireless Status to view the detailed wireless network information (e.g., Profile Name,
SSID or Signal Strength).
4. (Optional.) Drag up and down to scroll through the list of wireless network information.
Disconnecting the Wireless Network Connection
You can disconnect the wireless network connection from your phone.
To disconnect the wireless network:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
68
2. Tap Settings->Basic->Wi-Fi.
3. Tap the connected SSID (the top one).
4. Tap Forget.
Disabling Wi-Fi Feature
To disable Wi-Fi feature, do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
Tap Settings->Basic->Wi-Fi.
Tap the Off radio box in the Wi-Fi field.
Getting Started
69
- Swipe down from the top of the screen to enter the control center, and then tap .
The icon disappears from the status bar, and the Wi-Fi label resumes to Wi-Fi.
User Guide for SIP-T58V/A Smart Media Phone
70
Customizing Your Phone
71
Customizing Your Phone
You can customize your SIP-T58V/A smart media phone by personally configuring certain
settings, for example, wallpaper, time & date and ring tones. You can add contacts to the
phone’s local directory manually or from call history. You can also personalize different ring
tones for different callers.
This chapter provides basic operating instructions for customizing your phone. Topics include:
General Settings
Audio Settings
Contact Management
Call History Management
Search Source List in Dialing
System Customizations
If you require additional information or assistance with your new phone, contact your system
administrator.
General Settings
Wallpaper
You can customize the wallpaper of the SIP-T58V/A smart media phone and color-screen
expansion module EXP50 (if connected). You can also change the wallpaper image via phone
user interface or web user interface. The custom wallpaper can be a built-in image, a picture
stored in internal SD card/USB flash drive (if connected) or a picture uploaded via web user
interface. For more information on how to connect the USB flash drive, refer to Phone
Installation on page 31.
You can select a wallpaper from different categories:
Wallpapers: Set a recently used picture as the wallpaper, or tap “Pick image” to display the
available pictures from the Recent/Images/Downloads/Gallery list and then select a
desired picture as the wallpaper.
Gallery: Launch Gallery application, tap a Gallery albums and then select a desired picture
as the wallpaper.
User Guide for SIP-T58V/A Smart Media Phone
72
Uploading the Custom Wallpaper
The wallpaper image format must meet the following:
Format
Resolution
Single File Size
Screen Size
*.jpg
<=2.0 megapixels
<=5MB
7 inches (Resolution:
1024*600)
To upload the custom wallpaper via web user interface:
1. Click on Settings->Preference.
2. In the Upload Wallpaper field, click Browse to locate and upload the picture from your
local system.
3. Click Upload to upload the file.
The uploaded custom picture will apply to SIP-T58V/A smart media phone and EXP50, and
appear in the pull-down lists of Wallpaper and Wallpaper for Expansion Modules
synchronously. You can delete the custom wallpaper by clicking Del when selecting the desired
custom wallpaper in the Wallpaper or Wallpaper for Expansion Modules field.
Changing the Wallpaper
To change the phone wallpaper or EXP50 wallpaper via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Display.
3. Do one of the following:
- If you change the phone wallpaper, tap Wallpaper.
- If you change EXP wallpaper, tap EXP Background.
Customizing Your Phone
73
4. Do one of the following:
- Tap Gallery.
The touch screen displays all Gallery albums.
Select a desired Gallery album.
Tap a desired picture to preview, and then tap Set wallpaper or Set as exp
background.
User Guide for SIP-T58V/A Smart Media Phone
74
- Tap Wallpapers.
The touch screen displays the current used wallpaper in the background, built-in
wallpapers and the recently used wallpapers list on the bottom of the touch screen.
Do one of the following:
- Select a desired wallpaper from the build-in wallpapers and recently used
wallpapers list, and then tap Set wallpaper or Set as exp background.
- Tap Pick image.
The touch screen displays the recently saved pictures.
Customizing Your Phone
75
Tap on the top-left of the touch screen.
Do one of the following:
- Tap Images to see all pictures stored in internal SD card or USB flash drive (if
connected).
- Tap Downloads to see all pictures you have downloaded.
- Tap Gallery to see all pictures by Gallery application.
Select a desired picture to preview.
The picture will appear in the recently used wallpapers list.
Tap Set wallpaper or Set as exp background.
You can long tap the empty spot on the idle screen and then tap WALLPAPERS, the effect is
equal to tapping Settings->Basic->Display->Wallpaper->Wallpapers. Then you can change
the phone wallpaper as the operating instructions described above.
You can also change the phone/EXP wallpaper when viewing pictures by FileManager or
Gallery application. For more information, refer to FileManager on page 195 and Gallery on
page 208.
The phone and EXP wallpaper are configurable via web user interface at the path
User Guide for SIP-T58V/A Smart Media Phone
76
Settings->Preference.
Note
Screen Saver
The screen saver will automatically start each time your phone is idle for a certain amount of
time. The screen saver is used to blank the screen or fill it with moving images or patterns. If you
connect a color-screen expansion module EXP50 to the IP phone, the screen saver will start or
stop on the phone and EXP50 synchronously.
The screen saver will be stopped when:
Press any key.
Tap the touch screen.
Pick up or hang up the handset.
There is an incoming call.
A new prompt (e.g., missed call, new voice mail or forwarded call).
The status of BLF key changes.
If your phone is idle again for a specified period of time, the screen saver will start again.
The SIP-T58V/A smart media phone supports four screen saver types: Clock, Colors, Photo
Frame and Photo Table.
If you set the screen saver type to Clock, the touch screen will display as below when screen
saver starts:
The SIP-T58V/A smart media phone screen size is 7 inches (Resolution: 1024x600). The EXP50
screen size is 4.3 inches (Resolution: 272x480). If the size of the custom picture doesn’t meet the
IP phone/expansion module screen size, the wallpaper will be stretched or/and zoomed out
according to the screen size.
Customizing Your Phone
77
If you set the screen saver type to Colors, the touch screen will display as below when screen
saver starts:
If you set the screen saver type to Photo Frame, the touch screen will display the selected
pictures one by one when screen saver starts:
If you set the screen saver type to Photo Table, the touch screen will display the selected
pictures as below when screen saver starts:
User Guide for SIP-T58V/A Smart Media Phone
78
To configure the screen saver via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Display->Screen Saver.
3. Tap the Screen Saver Wait Time field.
4. Tap the desired time in the pop-up dialog box.
5. Do one of the following:
- Tap the Clock radio box.
(Optional.) Tap next to the radio box.
Tap the Style field to set the clock type to Analog or Digital.
Tap the Night mode radio box to display the screen saver dimly for dark rooms.
Tap to return to the Screen Saver setting screen.
- Tap the Colors radio box.
- Tap the Photo Frame radio box.
Tap next to the radio box to select the desired Gallery album(s).
Tap the desired checkbox or SELECT ALL on the top-right of the touch screen.
Customizing Your Phone
79
Tap to return to the Screen Saver setting screen.
- Tap the Photo Table radio box.
Tap next to the radio box to select the desired Gallery album(s).
Tap the desired checkbox or SELECT ALL on the top-right of the touch screen.
Tap to return to the Screen Saver setting screen.
6. Tap to accept the change or to cancel.
Note
Power Saving
The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
If you connect a color-screen expansion module EXP50 to the IP phone, the IP phone and EXP50
will enter or exit power-saving mode synchronously.
The IP phone will exit power-saving mode when:
Press any key.
Tap the touch screen.
Pick up or hang up the handset.
There is an incoming call.
A new prompt (e.g., missed call, new voice mail or forwarded call).
The status of BLF key changes.
Screen saver is configurable via phone user interface only.
User Guide for SIP-T58V/A Smart Media Phone
80
You can configure the following power-saving settings:
Office Hour
Idle TimeOut (minutes)
Note
Enabling the Power Saving
The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
To enable the power saving feature via web user interface:
1. Click on Settings->Power Saving.
2. Select Enabled from the pull-down list of Power Saving.
3. Click Confirm to accept the change.
Configuring the Office Hour
Office Hour specifies the starting time and ending time in the office each day.
To configure the office hour via web user interface:
1. Click on Settings->Power Saving.
2. Select a desired day of the week.
Power saving is configurable via web user interface only.
Customizing Your Phone
81
3. Enter the starting time and ending time respectively in the desired day field.
4. Click Confirm to accept the change.
Configuring the Idle TimeOut
Idle TimeOut specifies the period of time before the IP phone enters power-saving mode. The
following three types of idle timeout you can configure:
Office Hour Idle TimeOut: Configures the idle timeout for office hours.
Off Hour Idle TimeOut: Configures the idle timeout for non-office hours.
User Input Extension Idle TimeOut: Configures the idle timeout that applies after you
use the IP phone (for example, press a key on the phone, pick up/hang up the handset or
tap the touch screen).
By default, the Office Hour Idle TimeOut is much longer than the Off Hour Idle TimeOut. If you
use the IP phone, the idle timeout that applies (User Input Extension Idle TimeOut or Office
Hour/Off Hour Idle TimeOut) is the timeout with the highest value. If the phone has an incoming
call or message, the User Input Extension Idle TimeOut is ignored.
To configure the idle timeout via web user interface:
1. Click on Settings->Power Saving.
2. Enter the desired value in the Office Hour Idle TimeOut field.
The default value is 120, you can set to 1-240.
3. Enter the desired value in the Off Hour Idle TimeOut field.
The default value is 10, you can set to 1-10.
4. Enter the desired value in the User Input Extension Idle TimeOut field.
User Guide for SIP-T58V/A Smart Media Phone
82
The default value is 10, you can set to 1-30.
5. Click Confirm to accept the change.
Backlight
Backlight has two options:
Backlight Active Level: The intensity of the touch screen when the phone is active. You can
change the intensity of the touch screen by dragging the backlight active level slider.
Backlight Time: The delay time to change the intensity of the touch screen when the phone is
inactive. You can select a desired time to change the intensity or turn on the backlight
permanently.
Always On: Backlight is on permanently.
15s, 30s, 60s, 120s, 300s, 600s or 1800s: Backlight is changed when the phone is inactive
after the designated time (in seconds).
If you connect a color-screen expansion module EXP50 to the IP phone, the screen's intensity of
both the phone and EXP50 will change synchronously.
To configure the backlight via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Display->Backlight.
3. Drag the Backlight Active Level slider to change the intensity of the touch screen.
4. Tap the Backlight Time field.
Customizing Your Phone
83
5. Tap the desired time in the pop-up dialog box.
6. Tap to accept the change or to cancel.
You can also drag the backlight slider on the control center to change the intensity of the touch
screen.
To configure the backlight active level on the control center:
1. Swipe down from the top of the screen to enter the control center.
2. You can do one of the following:
- Drag the backlight slider.
User Guide for SIP-T58V/A Smart Media Phone
84
When dragging the slider, the control center (except the backlight slider) and
notification center will be hidden. You can view the intensity changes of the touch
screen in real-time.
If you lift your finger, the control center and notification center will be shown again.
- Tap .
The intensity of the touch screen is changed to the highest.
- Tap .
The intensity of the touch screen is changed to the lowest.
Backlight is configurable via web user interface at the path Settings->Preference.
Language
The default language of the phone user interface is English. If the language of your web browser
is not supported by the phone, the web user interface will use English by default. You can
change the language for the phone user interface and the web user interface respectively.
To change the language for the phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Language & Input->Language.
3. Drag up and down to scroll through the list of available languages.
Customizing Your Phone
85
4. Tap the desired language.
5. Tap to accept the change or to cancel.
Text displayed on the phone user interface will change to the selected language.
To change the language for the web user interface:
1. Click on Settings->Preference.
2. Select the desired language from the pull-down list of Language.
3. Click Confirm to accept the change.
Text displayed on the web user interface will change to the selected language.
Input Method
SIP-T58V/A smart media phone supports two kinds of input methods: Android Keyboard (AOSP)
– English (US) and Google Pinyin. The default input method is English (US). You can change the
current used input method.
User Guide for SIP-T58V/A Smart Media Phone
86
To change the input method:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Language & Input->Current Input.
3. Tap the desired input method in the pop-up dialog.
You can also long tap the following keys on the onscreen keyboard to change the input method:
For Android Keyboard (AOSP) – English (US) input method:
Customizing Your Phone
87
For Google Pinyin input method:
Note
Time & Date
There are three ways to view the time and date via phone user interface:
Viewing phone’s time on the status bar.
Viewing phone’s time and date by digital clock widget (refer to Clock).
Viewing phone’s time and date in the control center.
You can configure the phone to obtain the time and date from the SNTP server automatically, or
configure the time and date manually. If the phone cannot obtain the time and date from the
Simple Network Time Protocol (SNTP) server, contact your system administrator for more
information.
To configure the SNTP setting via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Time & Date->General.
3. Tap the Type field.
4. Tap SNTP Settings in the pop-up dialog box.
5. Tap the Time Zone field.
6. Tap the time zone that applies to your area in the pop-up dialog box.
The default time zone is “+8”.
7. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
field respectively.
8. Tap the Daylight Saving field.
9. Tap the desired value in the pop-up dialog box.
Input method is configurable via phone user interface only.
User Guide for SIP-T58V/A Smart Media Phone
88
10. Tap the Location field.
This field appears only if Daylight Saving field is selected to Automatic.
11. Tap the desired time zone name in the pop-up dialog box.
The default time zone name is “China(Beijing)”.
12. Tap to accept the change or to cancel.
Note
To configure the time and date manually via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Time & Date->General.
3. Tap the Type field.
4. Tap Manual Settings in the pop-up dialog box.
5. Enter the specific date and time in the corresponding fields.
6. Tap to accept the change or to cancel.
The time and date displayed on the touch screen will change accordingly.
Please refer to Appendix A - Time Zones for the list of available time zones on the IP phone.
Customizing Your Phone
89
You can configure the time format to display the time in 12 Hour format or 24 Hour format. This
operation will affect the configuration of Alarm. For more information, refer to Alarm on page
252.
You can also configure the date format for the time and date that displays on the control center.
There are 7 available date formats. For example, for the date format “WWW DD MMM”, “WWW”
denotes the abbreviation of the weekday, “DD” denotes the two-digit day, and “MMM” denotes
the first three letters of the month.
The date formats available:
Date Format
Example (2016-09-12)
WWW MMM DD
Mon Sep 12
DD-MMM-YY
12-Sep-16
YYYY-MM-DD
2016-09-12
DD/MM/YYYY
12/09/2016
MM/DD/YY
09/12/16
DD MMM YYYY
12 Sep 2016
WWW DD MMM
Mon 12 Sep
To configure the date and time format via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Time & Date->Time & Date Format.
3. Tap the Date Format field.
4. Tap the desired date format in the pop-up dialog box.
5. Tap the Time Format field.
6. Tap the desired time format (12 Hour or 24 Hour) in the pop-up dialog box.
7. Tap to accept the change or to cancel.
User Guide for SIP-T58V/A Smart Media Phone
90
Time and date are configurable via web user interface at the path Settings->Time & Date.
Administrator Password
The Advanced option is only accessible to the administrator. The default administrator
password is “admin”. For security reasons, you should change the default administrator
password as soon as possible.
To change the administrator password via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Set Password.
3. Enter the current password in the Old PWD field.
4. Enter the new password in the New PWD field.
5. Re-enter the new password in the Confirm PWD field.
6. Tap to accept the change or to cancel.
Administrator password is configurable via web user interface at the path Security->Password.
Key As Send
You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Key As Send.
3. Tap the Key As Send field.
Customizing Your Phone
91
4. Tap # or * in the pop-up dialog box, or tap Disabled to disable this feature.
5. Tap to accept the change or to cancel.
Key as send is configurable via web user interface at the path Features->General Information.
Phone Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
When the phone is locked, the following you need to know:
All keys and screen are locked except the HEADSET key, Volume key, digit keys, # key, * key and
Speakerphone key. You are only allowed to dial emergency numbers, reject incoming calls by
tapping the Reject soft key, answer incoming calls by lifting the handset, pressing the
Speakerphone key, the HEADSET key or tapping the Answer soft key, and end the call by
hanging up the handset, pressing the Speakerphone key or tapping the EndCall soft key.
Note
To activate the phone lock via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Phone Lock.
3. Tap the Lock Enable field.
4. Tap Enabled in the pop-up dialog box to enable this feature.
5. Enter the desired interval of automatic phone lock in the Auto Lock field.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press to lock it immediately when the phone is idle.
The emergency number setting, if desired, must be made before lock activation. For more
information, refer to Emergency Number on page 177.
User Guide for SIP-T58V/A Smart Media Phone
92
If set to other values except 0 (e.g., 5), the phone will be locked when the phone is inactive
in idle screen for the designated time (in seconds).
6. Tap to accept the change.
When the phone is locked, the touch screen prompts “Phone locked.” and displays the icon
on the status bar.
To unlock the phone, you must know the phone unlock PIN. The default phone unlock PIN
is “123”.
To unlock the phone via phone user interface:
1. Tap the screen or tap the locked key, the touch screen prompts “Unlock PIN”.
Customizing Your Phone
93
2. Enter the PIN in the Unlock PIN field.
3. Press OK to unlock the phone.
The icon disappears from the status bar.
You can long press or wait for a period of time (if configured) to lock the phone
again.
Note
To change the phone unlock PIN via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Change PIN.
3. Enter the desired value in the Old PIN, New PIN and Confirm PIN field respectively.
4. Tap to accept the change or to cancel.
Note
The unlock PIN length must be within 15 digits.
You can also unlock the phone by administrator password. When you enter the administrator
password to unlock the phone, the phone will turn to the Change PIN screen.
User Guide for SIP-T58V/A Smart Media Phone
94
To deactivate the phone lock via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Phone Lock.
3. Tap the Lock Enable field.
4. Tap Disabled in the pop-up dialog box to disable this feature.
5. Tap to accept the change.
Phone lock is configurable via web user interface at the path Features->Phone Lock.
Audio Settings
Volume
For SIP-T58V/A smart media phone, you can adjust the following volume level:
Ringer volume: Press the Volume key to adjust the ringer volume when the phone is idle
or ringing. When adjusting ringer volume, the touch sound and notification sound volume
will change as well. For more information on ring tones, touch sounds and/or notification
sound, refer to Ring Tones on page 97, Touch Sounds on page 100 and/or Notification
Sound on page 101.
Talking volume: Press the Volume key to adjust the receiver volume of currently engaged
audio devices (handset, speakerphone or headset) when the phone is in use.
Key tone volume: Press the Volume key to adjust the key tone volume when the phone is
on the dialing screen. For more information on key tone, refer to Key Tone on page 99.
Media volume: Press the Volume key to adjust the media volume when playing
audios/videos.
Customizing Your Phone
95
To adjust the ringer volume when the phone is idle:
1. Press to adjust the ringer volume.
To adjust the ringer volume when the phone is ringing:
1. Press to adjust the ringer volume.
You can also press to adjust the ringer volume when selecting a ring tone. For more
information, refer to Ring Tones on page 97.
Note
You can also drag the volume slider to adjust the ringer volume.
If the ringer volume is adjusted to minimum, the icon will appear on the status bar.
User Guide for SIP-T58V/A Smart Media Phone
96
To adjust the talking volume:
When the phone is during a call:
1. Press to adjust the volume of currently engaged audio device (handset,
speakerphone or headset).
You can also drag the volume slider to adjust the talking volume.
To adjust the key tone volume:
When the phone is on the dialing screen:
1. Press to adjust the key tone volume.
You can also drag the volume slider to adjust the key tone volume.
Customizing Your Phone
97
To adjust the media volume:
You can adjust the media volume in multiple scenarios. The following takes playing the audios
by FileManager application as example:
1. Press to adjust the media volume.
You can also drag the volume slider to adjust the media volume.
Ring Tones
Ring tones are used to indicate incoming calls. You can select different ring tones to distinguish
different accounts registered on your phone, or to distinguish your phone from your neighbor’s.
To select a ring tone for the phone via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Sound->Ring Tones->Common.
3. Drag up and down to scroll through the list of available ring tones.
4. Tap the desired ring tone.
5. (Optional.) Press to adjust the ringer volume.
User Guide for SIP-T58V/A Smart Media Phone
98
6. Tap to accept the change or to cancel.
A ring tone for the phone is configurable via web user interface at the path
Settings->Preference->Ring Type.
To select a ring tone for the account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Sound->Ring Tones.
3. Tap the desired account.
4. Drag up and down to scroll through the list of available ring tones.
5. Tap the desired ring tone.
If Common is selected, this account will use the ring tone selected for the phone.
6. (Optional.) Press to adjust the ringer volume.
7. Tap to accept the change or to cancel.
A ring tone for the account is configurable via web user interface at the path
Account->Basic->Ring Type.
To upload a custom ring tone for your phone via web user interface:
1. Click on Settings->Preference.
Customizing Your Phone
99
2. In the Upload Ringtone field, click Browse to locate a ring tone file (the file format must
be *.wav) from your local system.
3. Click Upload to upload the file.
The custom ring tone appears in the pull-down list of Ring Type.
You can only delete the custom ringtone by clicking Del in the Ring Type field.
Note
Key Tone
If you enable key tone, the phone will produce a sound when you press the keypad or tap any
key on the onscreen dial pad.
To enable key tone via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Sound->Key Tone.
The priority of ring tone for an incoming call on the phone is as follows:
Contact ring tone (refer to Adding Contacts) >Group ring tone (refer to Adding
Groups) >Account ring tone >Phone ring tone.
Single custom ring tone file must be within 8MB. Uploading custom ring tones for your phone is
configurable via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
100
3. Tap the On radio box in the Key Tone field.
4. Tap to accept the change or to cancel.
Key tone is configurable via web user interface at the path Features->Audio.
Touch Sounds
If you enable touch sounds, the phone will produce a sound when you tap an option on the
touch screen.
To enable touch sounds via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Sound->Touch Sounds.
3. Tap the On radio box in the Touch Sounds field.
4. Tap to accept the change or to cancel.
Note
Touch sound is configurable via phone user interface only.
Customizing Your Phone
101
Notification Sound
The phone will produce a notification sound when receiving a notification (e.g., incoming email
notification).
To select a notification sound for the phone via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Sound.
3. Tap the Notification Sound field.
4. Tap the desired notification sound in the pop-up dialog box.
5. (Optional.) Press to adjust the notification sound.
6. Tap OK to accept the change or Cancel to cancel.
Note
Silent Mode
If you turn on the silent mode, the IP phone won't produce ring tone/key tone/touch
sound/notification sound from phone's speaker.
To enable the silent mode via phone user interface, do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
Tap Settings->Basic->Sound.
Notification sound is configurable via phone user interface only.
User Guide for SIP-T58V/A Smart Media Phone
102
Tap the On radio box in the Silent Mode field.
Tap to accept the change or to cancel.
- Press to adjust the ringer volume to minimum.
- Swipe down from the top of the screen to enter the control center and toggle Silent on.
Note
Contact Management
This section provides the operating instructions for managing contacts. Topics include:
Local Directory
Blacklist
Remote Phone Book
Mobile Contacts
Silent mode is configurable via phone user interface only.
You may have no permission to turn on the silent mode. Contact your system administrator for
more information.
Customizing Your Phone
103
Local Directory
The built-in phone directory can store the names and phone numbers of your contacts. You can
store up to 1000 contacts and 48 groups in your phone's local directory. You can add new
groups and contacts, edit, delete or search for a contact, or simply dial a contact number from
the local directory.
Adding Groups
To add a group to the local directory:
1. Tap .
2. Tap Settings.
3. Tap New Group.
4. Enter the desired group name in the highlighted field.
5. Tap to accept the change.
6. Tap after the group name to specify a ring tone for the group.
User Guide for SIP-T58V/A Smart Media Phone
104
7. Tap the desired ring tone in the pop-up dialog box.
If Auto is selected, this group will use the ring tone according to the priority: Contact ring
tone (refer to Adding Contacts) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones). If a specific ring tone is selected, this group will use the ring tone
according to the priority: Contact ring tone (refer to Adding Contacts) >Group ring tone.
8. Tap OK to accept the change.
Editing Groups
To edit a group in the local directory:
1. Tap .
2. Tap Settings.
3. Tap the desired group.
Customizing Your Phone
105
4. Tap after the group name.
5. Edit the group name in the highlighted field.
6. Tap to accept the change.
Deleting Groups
To delete a group from the local directory:
1. Tap .
2. Tap Settings.
User Guide for SIP-T58V/A Smart Media Phone
106
3. Tap before the desired group name.
The touch screen prompts the following warning:
4. Tap OK to accept the change or Cancel to cancel.
Adding Contacts
You can add contacts to the local directory in one of the following ways:
Manually
From call history
From a remote phone book
Adding Contacts Manually
To add a contact to the local directory manually:
1. Tap .
2. Tap .
If you want to add a contact to the specified contact group, you can tap the contact group
Customizing Your Phone
107
first, and then tap .
3. Enter the name and the office, mobile or other numbers in the corresponding fields.
4. Tap the Account field.
5. Tap the desired account in the pop-up dialog box.
If Auto is selected, the phone will use the default account when placing calls to the contact
from the local directory.
6. Tap the Ring field.
7. Tap the desired ring tone in the pop-up dialog box.
If Auto is selected, this contact will use the ring tone according to the priority: Group ring
tone (refer to Adding Groups) >Account ring tone (refer to Ring Tones)>Phone ring tone
(refer to Ring Tones).
8. Tap the Photo field.
9. Tap the desired photo in the pop-up dialog box.
10. Tap to accept the change or tap and then tap Discard to cancel.
Note
Adding Contacts from Call History
To add a contact to the local directory from call history:
1. Tap .
2. Drag up and down to view the list of call history.
If the contact already exists in the directory, the touch screen will prompt “Contact name already
exists!”.
User Guide for SIP-T58V/A Smart Media Phone
108
3. Tap after the desired entry.
4. Tap Add.
5. Edit the corresponding fields.
6. Tap to accept the change.
The entry is successfully saved to the local directory.
Customizing Your Phone
109
Adding Contacts from a remote phone book
To add a contact to the local directory from a remote phone book:
1. Tap ->Remote Phone Book.
2. Tap the desired remote phone book.
The phone then connects to the remote phone book and proceeds to load it. The contacts
in the remote phone book are displayed on the touch screen.
3. Tap after the desired contact in the remote phone book.
4. Tap Add.
User Guide for SIP-T58V/A Smart Media Phone
110
5. Edit the corresponding fields.
6. Tap to accept the change or tap and then tap Discard to cancel.
If the contact already exists in the local directory, the touch screen will prompt "Overwrite
the original contact?". Tap OK to overwrite the original contact in the local directory or
Cancel to cancel.
For more information on remote phone book operation, refer to Remote Phone Book on page
121.
Editing Contacts
To edit a contact in the local directory:
1. Tap .
2. Tap after the desired contact.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap after the desired contact.
Customizing Your Phone
111
3. Tap the desired field to edit the contact information.
You can tap or to change the contact you want to edit.
4. Tap to accept the change or tap and then tap Discard to cancel.
Deleting Contacts
To delete a contact from the local directory:
1. Tap .
2. Tap after the desired contact.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap after the desired contact.
3. Tap Delete.
User Guide for SIP-T58V/A Smart Media Phone
112
The touch screen prompts the following warning:
4. Tap OK to accept the change or Cancel to cancel.
To delete all contacts:
1. Tap .
2. Tap Settings.
3. Tap the Select All radio box.
4. Tap .
Customizing Your Phone
113
The touch screen prompts the following warning:
5. Tap OK to accept the change or Cancel to cancel.
Uploading Contact Photos
To upload a new custom photo for the contact via web user interface:
1. Click on Directory->Local Directory.
2. Click Upload Photo, and then locate and upload a photo file from your local computer.
The web user interface prompts “Upload success!”.
User Guide for SIP-T58V/A Smart Media Phone
114
You can click Delete Photo to delete the custom photo.
Note
To change the custom photo for the contact via web user interface:
1. Click on Directory->Local Directory.
2. Click the desired contact you want to edit.
3. Select the desired photo from the pull-down list of Photo.
4. Click Edit to accept the change.
The phone only supports *.png, *.jpg, *.jpeg and *.bmp format files. The file size must be less
than 2M.
You can only delete custom photos.
Customizing Your Phone
115
When you place a call to the contact or receive a call from the contact, the touch screen will
display the contact photo.
Placing Calls to Contacts
To place a call to a contact from the local directory:
1. Tap .
2. If the contact was added to a specified contact group, you can tap the contact group first,
and then do one of the following:
- Tap the desired contact.
If only one number for the contact is stored in the local directory, the IP phone
will dial out the number.
If multiple numbers for the contact are stored in the local directory, tap the
desired number to dial out.
- Tap after the desired contact.
If only one number for the contact is stored in the local directory, tap Send to dial
out the number.
User Guide for SIP-T58V/A Smart Media Phone
116
If multiple numbers for the contact are stored in the local directory, tap Send to
display all numbers.
Tap the desired number to dial out.
Searching for Contacts
To search for a contact in the local directory:
1. Tap .
2. Do one of the following :
- Tap Search.
Customizing Your Phone
117
Enter a few continuous characters of the contact name or continuous numbers of the
contact number (office, mobile or other number) using the onscreen keyboard.
The contacts whose name or phone number matches the characters entered will appear on
the touch screen. You can dial from the result list.
- Tap the desired letter (e.g., T) along the right side to jump to contacts whose names
start with T or t.
Drag up and down to select the desired contact to view or dial out.
Importing/Exporting Contact Lists
You can manage your phone’s local directory via phone user interface or web user interface. But
you can only import or export the contact list via web user interface.
To import an XML contact list file via web user interface:
1. Click on Directory->Local Directory.
User Guide for SIP-T58V/A Smart Media Phone
118
2. Click Import XML to locate and upload a contact list file (the file format must be *.xml)
from your local system.
The web user interface prompts "The original contact will be covered, continue?".
3. Click OK to complete importing the contact list.
To import a CSV contact list file via web user interface:
1. Click on Directory->Local Directory.
2. Click Import CSV to locate and upload a contact list file (the file format must be *.csv)
from your local system.
Customizing Your Phone
119
3. (Optional.) Check the Show Title checkbox.
It will prevent importing the title of the contact information which is located in the first line
of the CSV file.
4. (Optional.) Check the Delete Old Contacts checkbox.
It will delete all existing contacts while importing the contact list.
5. Click Import to complete importing the contact list.
To export a contact list via web user interface:
1. Click on Directory->Local Directory.
2. Click Export XML (or Export CSV).
3. Click Save to save the contact list to your local system.
Note
Importing/exporting contact lists is available via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
120
Blacklist
The built-in phone directory can store names and phone numbers for a blacklist. You can store
up to 30 contacts; add, edit, delete or search for a contact in the blacklist directory, and even call
a contact from the blacklist directory. Incoming calls from the blacklist directory contacts will be
rejected automatically.
To add a contact to the blacklist directory manually:
1. Tap ->Blacklist.
2. Tap .
3. Enter the contact’s name and the office, mobile or other numbers in the corresponding
fields.
4. Tap the Account field.
5. Tap the desired account in the pop-up dialog box.
If Auto is selected, the phone will use the default account when placing calls to the contact
from the blacklist directory.
6. Tap to accept the change or tap and then tap Discard to cancel.
Customizing Your Phone
121
To add a contact to the blacklist directory from the local directory:
1. Tap .
2. Tap after the desired contact.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap after the desired contact.
3. Tap Blacklist.
The touch screen prompts the following warning:
4. Tap OK to accept the change.
For operating instructions on editing, deleting, placing calls to and/or searching for contacts in
the blacklist directory, refer to the operating instructions of Editing Contacts on page 110,
Deleting Contacts on page 111, Placing Calls to Contacts on page 115 and/or Searching for
Contacts on page 116.
Remote Phone Book
You can add contacts to the local directory, search for a contact, or simply dial a contact number
from the remote phone book.
You can configure your new phone to access up to 5 remote phone books. The phone supports
up to 5000 remote phone book entries. For the access URL of the remote phone book, contact
your system administrator.
For operating instructions on placing calls to and/or searching for contacts in the remote phone
book, refer to the operating instructions of Placing Calls to Contacts on page 115 and/or
Searching for Contacts on page 116.
Configuring an Access URL
To configure an access URL for a remote phone book via web user interface:
1. Click on Directory->Remote Phone Book.
2. Enter the access URL in the Remote URL field.
User Guide for SIP-T58V/A Smart Media Phone
122
3. Enter the name in the Display Name field.
4. Click Confirm to accept the change.
Note
Accessing the Remote Phone Book
To access your remote phone book via phone user interface:
1. Tap ->Remote Phone Book.
2. Tap the desired remote phone book.
The phone then connects to the remote phone book and proceeds to load it. The contacts
in the remote phone book are displayed on the touch screen.
You can tap to go back to the idle screen.
Incoming/Outgoing Call Lookup
You can enable the phone to present the caller/callee identity stored in the remote phone book
when receiving/placing a call.
An access URL for a remote phone book is configurable via web user interface only.
Customizing Your Phone
123
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Incoming/Outgoing Call Lookup.
3. Enter the desired refresh period in the Update Time Interval(Seconds) field.
The default value is 21600.
4. Click Confirm to accept the change.
Mobile Contacts
The first time your IP phone pairs and connects to your Bluetooth-enabled mobile phone, you
will be asked if you would like to sync phone contacts temporarily. If allowed, the phone
contacts will be imported to the mobile contacts directory of your IP phone. For more
information, refer to Bluetooth-Enabled Mobile Phone on page 143.
You can add a contact to the local directory or blacklist directory from mobile contacts. You
cannot add a contact to the mobile contacts directory on your IP phone.
Note
For operating instructions on placing calls to and/or searching for contacts in the mobile
contacts directory, refer to the operating instructions of Placing Calls to Contacts on page 115
and/or Searching for Contacts on page 116.
To add a contact to the local directory from mobile contacts directory:
1. Tap ->Mobile Contacts.
2. Drag up and down to view the list of Mobile Contacts.
If you disconnect the Bluetooth-enabled mobile phone from IP phone or disable the IP phone to
sync phone contacts, the mobile contacts directory will disappear.
User Guide for SIP-T58V/A Smart Media Phone
124
3. Tap after the desired entry.
4. Tap Add.
5. Edit the corresponding fields.
6. Tap to accept the change or tap and then tap Discard to cancel.
The entry is successfully saved to the local directory.
To add a contact to the blacklist directory from the mobile contacts directory:
1. Tap ->Mobile Contacts.
2. Tap after the desired contact.
3. Tap Blacklist.
Customizing Your Phone
125
4. Edit the corresponding fields.
5. Tap to accept the change or tap and then tap Discard to cancel.
The entry is successfully saved to the blacklist directory.
Note
To update the mobile contacts directory:
1. Tap ->Mobile Contacts.
2. Tap .
The touch screen will prompt “Updating, please wait…”, you need to authorize the IP
phone to sync the contacts temporarily on the mobile phone.
After updating, the contacts you add, edit, delete on the mobile phone will sync to the mobile
contacts directory.
Note
The contact that be added to the local directory or blacklist directory will not disappear, after you
disconnect the mobile phone from the IP phone.
If you disconnect the mobile phone from IP phone while the IP phone is updating the mobile
phone book. The touch screen will prompt “Fail to download mobile contacts!”, and the mobile
contacts directory will disappear from the IP phone directory list.
User Guide for SIP-T58V/A Smart Media Phone
126
Call History Management
The SIP-T58V/A smart media phone maintains call history lists of Missed calls, Placed calls,
Received calls and Forwarded calls. Each call history list supports up to 100 entries. You can view
call history, place a call, add a contact or delete an entry from the call history list.
History record feature is enabled by default, if you don’t want to save the call history, you can
disable the feature.
Viewing History Records
To view call history:
1. Tap .
The touch screen displays all call records.
2. Drag up and down to scroll.
You can tap Missed Calls, Placed Calls, Received Calls or Forwarded Calls to view entries
in each call list directly.
Customizing Your Phone
127
3. Tap after the desired entry.
The detailed information of the entry appears on the touch screen.
Placing a Call from History Records
To place a call from the call history list:
1. Tap .
The touch screen displays all call records.
2. Drag up and down to scroll.
You can tap Missed Calls, Placed Calls, Received Calls or Forwarded Calls to view entries
in each call list directly.
3. Tap the desired entry.
User Guide for SIP-T58V/A Smart Media Phone
128
Adding a Contact to the Blacklist
To add a contact to the blacklist directory from the call history list:
1. Tap .
The touch screen displays all call records.
2. Drag up and down to scroll.
You can tap Missed Calls, Placed Calls, Received Calls or Forwarded Calls to view entries
in each call list directly.
3. Tap after the desired entry.
4. Tap Blacklist.
5. Enter the desired values in the corresponding fields.
6. Tap to accept the change or tap and then tap Discard to cancel.
For more information, refer to Blacklist on page 120.
Customizing Your Phone
129
Deleting History Records
To delete an entry from the call history list:
1. Tap .
The touch screen displays all call records.
2. Drag up and down to scroll.
You can tap Missed Calls, Placed Calls, Received Calls or Forwarded Calls to view entries
in each call list directly.
3. Tap after the desired entry.
4. Tap Delete.
The touch screen prompts the following warning:
5. Tap OK to confirm the deletion or Cancel to cancel.
To delete all entries from the call history list:
1. Tap .
User Guide for SIP-T58V/A Smart Media Phone
130
The touch screen displays all call records.
2. Drag up and down to scroll.
You can tap Missed Calls, Placed Calls, Received Calls or Forwarded Calls to view entries
in each call list directly.
3. Tap Settings.
4. Tap the Select All radio box.
Customizing Your Phone
131
5. Tap .
The touch screen prompts the following warning:
6. Tap OK to confirm the deletion or Cancel to cancel.
Disabling History Records
To disable history record via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->History Record.
3. Tap the Off radio box in the History Record field.
4. Tap to accept the change or to cancel.
Search Source List in Dialing
You can search for a contact from the desired lists when the phone is in the dialing screen. The
lists can be Local Directory, History, Remote Phone Book and LDAP.
User Guide for SIP-T58V/A Smart Media Phone
132
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and then
click .
5. To adjust the display order of the enabled list, select the desired list, and click
or .
6. Click Confirm to accept the change.
The touch screen will display search results in the adjusted order.
Note
To search for an entry in the enabled search source lists:
1. Pick up the handset, press the Speakerphone key or tap the line key.
2. Enter a few continuous characters of the entry’s name or continuous numbers of the
entry’s phone number (office, mobile or other number).
The entries in the enabled search source lists whose name or phone number matches the
characters entered will appear on the touch screen.
Search source list in dialing is configurable via web user interface only.
Customizing Your Phone
133
You can tap the desired entry to place a call to the entry.
Note
System Customizations
Headset Use
If you want to use a YHS32/YHS33/USB headset, physically connect your headset to the phone
and activate the headset mode for use. For more information on physically connecting a
headset, refer to Phone Installation on page 31.
If you want to use a Bluetooth headset, activate the Bluetooth mode and then pair and connect
the Bluetooth headset with your phone. For more information on using a Bluetooth headset,
refer to Bluetooth Headset on page 136.
This section provides an introduction to wired headset use.
Note
The SIP-T58V/A smart media phone supports three types of headsets: YHS32/YHS33 headset,
USB headset and Bluetooth headset. You can connect up to three types of headsets at once. The
IP phone will use the headset by the priority: USB/Bluetooth headset>YHS32/YHS33 headset. If
both a Bluetooth headset and a USB headset are connected, only the last connected headset can
be used.
You can use USB headset to answer an incoming call directly without activating the headset
mode.
If you connect a Bluetooth-Enabled mobile phone to the IP phone, and enable the IP phone to
sync phone contacts. The IP phone will first search the contacts in the mobile contacts directory
then placed calls list. For more information, refer to Mobile Contacts on page 123.
User Guide for SIP-T58V/A Smart Media Phone
134
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press on the phone.
The HEADSET key LED illuminates solid green, and the icon appears on the status bar.
When you tap the line key or the Answer soft key to answer an incoming call, the call is
connected to your headset automatically. For more information on using the headset to answer
a call, refer to Answering Calls on page 267.
With the handset on-hook, enter the desired number and tap Send, the phone will then place a
call using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls on page 264.
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out, and the icon disappears from the status bar.
Headset Prior
You can use headset in priority when headset prior feature is enabled. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
Customizing Your Phone
135
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press to activate the headset mode.
Note
Dual Headset
You can use two headsets when dual headset feature is enabled. To use this feature, you must
physically connect headsets to the headset jack and handset jack respectively. Once the phone
connects to a call, the headset connected to the headset jack will have full-duplex capabilities,
while the one connected to the handset jack will only be able to listen.
Note
To enable dual headset via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Dual-Headset.
3. Click Confirm to accept the change.
Note
Dual headset is configurable via web user interface only.
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
If headset prior is disabled, the headset mode can be deactivated by pressing the Speakerphone
key or the HEADSET key.
Headset prior is configurable via web user interface only.
Dual headset is only applicable to YHS32/YHS33 headset.
User Guide for SIP-T58V/A Smart Media Phone
136
Bluetooth Headset
The SIP-T58V/A smart media phone supports Bluetooth. Bluetooth enables low-bandwidth
wireless connections within a range of 10 meters (32 feet). The best performance is in the 1 to 2
meters (3 to 6 feet) range.
You can activate/deactivate the Bluetooth mode, and then pair and connect the Bluetooth
device with your phone. You can pair up to countless Bluetooth devices with your phone;
however, only one Bluetooth device can be connected at a time. You can also share files with
friends via Bluetooth.
You can pair and connect a Bluetooth headset/speakerphone/microphone or a
Bluetooth-enabled mobile phone to your IP phone. And the Bluetooth operating instructions on
different Bluetooth devices are the same. The following take Bluetooth headset as example. For
more information on Bluetooth-enabled mobile phone, refer to Bluetooth-Enabled Mobile
Phone on page 143.
Activating/Deactivating the Bluetooth Mode
To activate the Bluetooth mode via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the On radio box in the Bluetooth field.
Customizing Your Phone
137
The IP phone scans the available Bluetooth device automatically. After scanning, the touch
screen displays the Bluetooth device information (device type and device name).
The touch screen displays the Bluetooth icon .
You can also swipe down from the top of the screen to enter the control center, and toggle
Bluetooth on.
To deactivate the Bluetooth mode via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the Off radio box in the Bluetooth field.
The Bluetooth icon disappears from the status bar.
Bluetooth mode is configurable via web user interface at the path Features->Bluetooth.
Pairing and Connecting the Bluetooth Headset
Before you pair a Bluetooth headset, check the indicator on the Bluetooth headset to make sure
that the Bluetooth headset is discoverable. For more information, refer to the documentation
from the Bluetooth headset manufacturer.
User Guide for SIP-T58V/A Smart Media Phone
138
To pair and connect your Bluetooth headset to your phone:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the On radio box in the Bluetooth field.
If there is no Bluetooth device found on the touch screen, tap to search for the
Bluetooth device.
4. Tap the desired Bluetooth headset to connect to your phone.
Once the connection has completed successfully, the prompt “Connected” appears under
the Bluetooth headset name.
Customizing Your Phone
139
The Bluetooth icon appears on the status bar.
With the Bluetooth headset paired and connected, you can use the Bluetooth headset to
place and answer calls. For more information, refer to the documentation from the
Bluetooth headset manufacturer.
Making the Phone Discoverable
If you make your IP phone visible to other Bluetooth devices, the other Bluetooth devices can
scan and find your IP phone. But if your IP phone is not visible to other Bluetooth devices, your
IP phone’ device name will not display in scanning list of other device.
To make the phone discoverable:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the On radio box in the Bluetooth field.
4. Tap Edit My Device Information.
5. Tap the On radio box in the Open Discover field.
The IP phone will be visible to all Bluetooth devices nearby.
User Guide for SIP-T58V/A Smart Media Phone
140
Editing Device Information
To edit device information via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth->Edit My Device Information.
3. Enter the desired name in the Device Name field.
The default device name is “Yealink-T58”.
4. Tap to accept the change or to cancel.
You should make your phone discoverable first, and then the pre-configured Bluetooth device
name will display in scanning list of other device.
Renaming the Paired Bluetooth Device
To rename the paired Bluetooth device:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
The touch screen displays the paired and connected Bluetooth headset.
Customizing Your Phone
141
3. Tap after the connected Bluetooth headset name.
4. Enter the desired headset name in the Rename field.
5. Tap to accept the change or to cancel.
The configured Bluetooth headset name will display in the PARED DEVICES list on your
phone. The Bluetooth headset name displayed in scanning list of other devices will not be
changed.
Note
Disconnecting the Bluetooth Headset
To disconnect your Bluetooth headset from your phone:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the connected Bluetooth headset.
4. Tap OK to accept the change or Cancel to cancel.
The icon only appears after the device name of the Bluetooth device that you are connecting
or have connected.
User Guide for SIP-T58V/A Smart Media Phone
142
The Bluetooth headset is disconnected. To connect it to your phone again, tap the Bluetooth
headset again.
Unpairing the Bluetooth Headset
You can unpair your Bluetooth headset and your phone. When you unpair the Bluetooth
headset, it disappears from the PAIRED DEVICES list. To connect it to your phone again, you
just need to tap the desired Bluetooth headset in the AVAILABLE DEVICES list.
To unpair Bluetooth headset via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
The touch screen displays the paired and connected Bluetooth headset.
3. Tap after the connected Bluetooth headset name.
Customizing Your Phone
143
4. Tap Unpair.
The Bluetooth headset disappears from the PAIRED DEVICES list.
Bluetooth-Enabled Mobile Phone
Yealink SIP-T58V/A smart media phone supports the use of your IP phone in conjunction with
Bluetooth-enabled mobile phone. You can do the following:
- Pair and connect your IP phone with a Bluetooth-enabled mobile phone to make and
receive mobile calls. Your mobile phone is automatically assigned a line key on your IP
phone.
- Import your mobile contacts into the IP phone.
- Use your IP phone as a hands free device for your mobile phone.
For operating instructions on activating/deactivating the Bluetooth mode, making the phone
discoverable, editing device information, renaming the paired Bluetooth device and
disconnecting/unpairing the paired Bluetooth-enabled mobile phone, refer to the operating
instructions of Bluetooth Headset on page 136.
Note
Pairing and Connecting the Bluetooth-Enabled Mobile Phone
You can only connect one Bluetooth device at a time. After connection, the IP phone will
automatically find an available line key and assign the line key for Mobile Account. The Mobile
Account key’s default label is “My Mobile”. If there is no available line key, you may assign it
manually.
The mobile phone will disconnect from your phone in the following introduced scenarios:
Deactivate the Bluetooth mode from the IP phone.
Not all mobile phones support this function. Contact your system administrator for more
information.
User Guide for SIP-T58V/A Smart Media Phone
144
Connect a Bluetooth headset to the IP phone.
Deactivate the Bluetooth mode from mobile phone.
The distance between mobile phone and IP phone is out of the range of 10 meters.
Before you pair a Bluetooth-Enabled mobile phone, check the Bluetooth mode on the
Bluetooth-Enabled mobile phone to make sure that the Bluetooth-Enabled mobile phone is
discoverable.
To pair and connect the Bluetooth-Enabled Mobile Phone with your phone:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap the On radio box in the Bluetooth field.
If there is no Bluetooth-Enabled mobile phone found on the touch screen, tap the Scan
soft key to search for the Bluetooth-Enabled mobile phone.
4. Tap the desired Bluetooth-Enabled mobile phone in the Bluetooth devices list to connect
the mobile phone to your phone.
5. Tap Pair on both mobile phone and IP phone.
Customizing Your Phone
145
Then the IP phone will prompt “Would you like to sync phone contacts temporarily?”.
6. (Optional.) Tap OK to enable the mobile contacts sync feature and the IP phone will sync
the mobile contacts temporarily, or tap Cancel to disable mobile contacts sync feature and
the IP phone will not sync the mobile contacts. If you tap Cancel, you can also manually
enable the mobile contacts sync feature on the IP phone. For more information, refer to
Syncing the Mobile Contacts to the IP Phone on page 146.
If you enable mobile contacts sync feature, you also need to authorize the IP phone to sync
the contacts temporarily on the mobile phone.
Once the connection has completed successfully, the prompt “Connected” appears under
the Bluetooth-Enabled mobile phone name.
User Guide for SIP-T58V/A Smart Media Phone
146
The Bluetooth icon will display on the status bar.
And the IP phone automatically assigns a Mobile Account key.
For more information on how to configure the Mobile Account key, refer to Mobile Account on
page 165. Before you configure the Mobile Account key, make sure the Bluetooth-Enabled
mobile phone is connected. Otherwise the IP phone will prompt “Mobile Account is not
connected!”. If the distance between mobile phone and IP phone is more than 10 meters or the
Bluetooth mode on the mobile phone is deactivated, you can tap the Mobile Account key to
reconnect the last paired Bluetooth-Enabled mobile phone.
Syncing the Mobile Contacts to the IP Phone
If you disable the mobile contacts sync feature when you pair and connect the
Bluetooth-Enabled mobile phone to the IP phone (refer to Pairing and Connecting the
Bluetooth-Enabled Mobile Phone), you need to enable the mobile contacts sync feature
manually when you want to sync the mobile contacts the IP phone.
Note
To enable the mobile contacts sync feature manually:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->Bluetooth.
3. Tap after the desired Bluetooth-Enabled mobile phone name.
Not all mobile phones support syncing the mobile contacts to IP phone. For more information,
contact your system administrator.
Customizing Your Phone
147
4. Mark the Mobile Contacts Sync radio box.
You need to authorize the IP phone to sync the contacts temporarily on the mobile phone.
And then the mobile contacts directory will appear in the IP phone directory list.
To view your mobile contacts on the IP phone:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap ->Mobile Contacts.
The contacts in the mobile phone will display in the Mobile Contacts list.
For operating instructions on adding contact to local/blacklist directory from mobile
contacts directory, update the mobile contacts directory or placing calls to and searching
for contacts in the mobile contacts directory, refer to the operating instructions of Mobile
Contacts on page 123.
Note
If the mobile phone disconnects from the IP phone while the IP phone is loading the mobile
contacts, the touch screen will prompt “Fail to download mobile contacts!”, and the mobile
contacts directory will not appear at the IP phone directory list.
User Guide for SIP-T58V/A Smart Media Phone
148
Making a Mobile Phone Call by Using the IP Phone
When you make a mobile phone call by using your IP phone, the IP phone acts as a hands free
device for your mobile phone. The call is made through your mobile phone, but the audio is
present on and the call control is done by using the IP phone. You can have both mobile phone
call and IP phone call on your IP phone, and two types of calls will not affect each other.
To make a call through a mobile phone:
1. Tap the My Mobile line key.
2. Enter the desired number.
3. Tap Call from Mobile.
The outgoing call information will appear on both your IP phone and mobile phone screen.
After the call is picked up, the audio goes through the IP phone, although the mobile
phone screen also shows a connected call. You can hold, mute or end the call on the IP
phone, and after you hold the call you can resume the call or place a new call.
Note
You can control the call’s audio to go through the mobile phone or IP phone on your mobile
phone. For example, if you choose Bluetooth, the audio will go through the IP phone; if you
choose Handset earpiece or Speaker, the audio will go through the mobile phone.
The phone will first match the contacts in the mobile contacts directory to present the
caller/callee identity when receiving/placing a mobile phone call.
Customizing Your Phone
149
Receiving Mobile Phone Calls by Using the IP Phone
If your mobile phone is paired and connected with the IP phone, an incoming call to your
mobile phone is also shown on the IP phone.
To handle a mobile phone call by using the IP phone, do one of the following:
- Press , tap the Answer soft key or pick up the handset to connect to the call.
- Tap the Reject soft key to reject the call.
Sending Files via Bluetooth
The Gallery and FileManager applications support sending files via Bluetooth. You can send
pictures, videos or audios to a Bluetooth-enabled mobile phone or other Bluetooth devices
displayed in the AVAILABLE DEVICES list. For more information, refer to Sharing
Pictures/Videos/Audios on page 204 and Sharing Pictures/Videos on page 219.
Receiving Files via Bluetooth
The Bluetooth-enabled mobile phone or other Bluetooth devices can share files with your IP
phone. The file type is not restricted, you can receive pictures, audios, videos, documents, and
so on. You can use the corresponding system applications to view the files. You can only receive
files from the Bluetooth devices displayed in the in the AVAILABLE DEVICES list.
User Guide for SIP-T58V/A Smart Media Phone
150
To receive file via Bluetooth:
1. Share a file with the IP phone on your Bluetooth device.
For more information, refer to the documentation from the Bluetooth device manufacturer.
The IP phone will play a notification sound, and the touch screen prompts “Accept
incoming file?”.
2. Tap Accept to start receiving the file.
The touch screen prompts “The file will be received. Check progress in the Notification
panel.”. The icon will display on the status bar.
Customizing Your Phone
151
3. (Optional.) Swipe down from the top of the screen to enter the notification center.
Tap the notification “Bluetooth share: Received file”.
You can use the corresponding system applications to view the file.
DSS Keys
There are two types of DSS keys: Line Keys and Programable Keys. Details will be introduced in
the following. The SIP-T58V/A smart media phone supports 27 line keys and 3 programable
keys.
Line Keys
You can assign predefined functionalities to line keys. You can also define a label for a line key
feature which will appear on the touch screen. Line keys allow you to quickly access features
such as recall and voice mail. The line key can indicate the monitored status when the line keys
are assigned with particular features, such as BLF. The default key type of line key 1-16 is Line.
The default key type of line key 17-27 is N/A, which indicates that this line key provides no
functionality until configuration.
User Guide for SIP-T58V/A Smart Media Phone
152
Assigning Functionality to a Line Key
To assign functionality to a line key via phone user interface:
1. Do one of the following:
- Tap on the home screen, when there is no line key configured on your phone.
- Drag up and down to scroll through the line key list if required.
Drag the line key to the Edit field.
- Tap on the bottom-left of the line key list.
Customizing Your Phone
153
- Tap on the bottom-right of the line key list.
The touch screen will display all the line keys.
Drag the line key to the Edit field.
- Swipe down from the top of the screen or swipe left/right to go to the second idle
screen.
Tap Settings->Features->DSS Keys.
Tap the desired line key.
2. Select the desired key type from the Type field.
3. (Optional.) Select the desired key event type from the Key Type field.
4. (Optional.) Select the desired line from the Account ID field.
5. (Optional.) Enter the string that will appear on the touch screen in the Label field.
6. (Optional.) Enter the corresponding value in the Value field.
7. (Optional.) Enter the corresponding value in the Extension field.
8. Tap to accept the change or to cancel.
Changing the Location of the Line Keys
You can change the line key’s location to a blank area on the Line keys field. You can also
change the location of two line keys. And the operating instructions are almost the same. The
following take how to change the location of two line keys as example.
To change the locations of two line keys:
1. Do one of the following:
- Drag up and down to scroll through the line keys list if required.
- Tap on the bottom-right of the line key list.
User Guide for SIP-T58V/A Smart Media Phone
154
2. Drag a line key to the desired location at which another line key locates.
For example, exchange the locations of line key 1 and line key 2:
The following shows the locations of two line keys after exchange:
Customizing Your Phone
155
Deleting a Line Key
To delete a line key:
1. Do one of the following:
- Drag up and down to scroll through the line keys if required.
- Tap on the bottom-left of the line key list.
The touch screen will display all the line keys.
User Guide for SIP-T58V/A Smart Media Phone
156
2. Drag the desired line key to the Delete field.
The touch screen will prompt “Delete the DSS key?”.
3. Tap OK to accept the change or Cancel to cancel.
Page Tips
The line key list can only display 6 line keys on one page. If the BLF monitored user receives an
incoming call on non-current page, you may miss the call because there is no notification on the
current page.
If page tips feature is enabled, the breathing light will appear at the top/bottom of the line key
list when the status of particular feature (e.g., BLF, Line, Intercom) assigned to the line key on the
non-current page changes. You can drag the line key list up or down to view the line key, and
the breathing light will disappear.
Note
The breathing light may differ in color. For more information, contact your system administrator.
Customizing Your Phone
157
The following figure shows an example of the breathing light appears at the top of the line key
list:
The following figure shows an example of the breathing light appears at the bottom of the line
key list:
To configure the page tips feature via web user interface:
1. Click on DSSKey->Line key.
User Guide for SIP-T58V/A Smart Media Phone
158
2. Select Enabled from the pull-down list of Enable Page Tips.
3. Click Confirm to accept the change.
Note
Line Key Features
Line key features are explained in the following subchapters in detail:
Line
Speed Dial
Voice Mail
Direct Pickup
Group Pickup
DTMF
Prefix
Local Group
XML Group
XML Browser
LDAP
Conference
Forward
Transfer
Hold
DND
Group Listening
Page tips feature is configurable via web user interface only.
Customizing Your Phone
159
Zero Touch
URL
Phone Lock
Directory
Mobile Account
Call Park
Retrieve Park
For the features not listed above, refer to Basic Phone Features on page 263 and Advanced
Phone Features on page 327. For more information, contact your system administrator.
Line
You can use this key feature to accept incoming calls, place active calls on hold or resume a
held call.
Dependencies:
Type (Line)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Usage: When the phone receives an incoming call,
1. Tap the line key to accept the incoming call.
2. Tap the line key to place a new call and the active call is placed on hold.
3. Tap the line key again to resume the held call.
Speed Dial
You can use this key feature to speed up dialing the numbers frequently used/hard to
remember or perform blind transfer conveniently during the call.
Dependencies:
Type (Speed Dial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the number you want to dial out/transfer to)
Usage:
When the IP phone is idle, tap the speed dial key to dial out the number specified in the
Value field, using the account selected from the Account ID field.
When there is an active call on the line selected from the Account ID field, drag the
far-site window to the speed dial key field to perform blind transfer to the number that
specified in the Value field.
Voice Mail
You can use this key feature to quickly connect voice mail. For more information, refer to
Message on page 376.
Dependencies:
Type (Key Event)
User Guide for SIP-T58V/A Smart Media Phone
160
Key Type (Voice Mail)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the voice mail access code)
Usage: Tap the voice mail key to dial out the voice mail access code. Then follow the voice
prompt to listen to the voice mails.
Direct Pickup
You can use this key feature to answer someone else’s incoming call on the phone.
Dependencies:
Type (Key Event)
Key Type (DPickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the directed call pickup code followed by the target phone number)
Usage: Tap the direct pickup key on your phone when the target phone number receives an
incoming call. The call is then answered on your phone.
Group Pickup
You can use this key feature to answer incoming calls in a group that is associated with their
own group.
Dependencies:
Type (Key Event)
Key Type (GPickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the group pickup code)
Usage: Tap the group pickup key on your phone when a phone number in the group receives
an incoming call. The call is answered on your phone.
DTMF
You can use this key feature to send the specification of arbitrary key sequences via DTMF.
Dependencies:
Type (Key Event)
Key Type (DTMF)
Label (key label displayed on the touch screen)
Value (DTMF sequence)
Usage: Tap the DTMF key during an active call to send the key sequence specified in the Value
field.
Note
DTMF sequence can only contain “0-9”, “*”, “#” and “A-D”.
Customizing Your Phone
161
Prefix
You can use this key feature to add a specified prefix number before the dialing number.
Dependencies:
Type (Key Event)
Key Type (Prefix)
Label (key label displayed on the touch screen)
Value (the prefix number)
Usage: Tap the prefix key when the phone is idle, the phone will then enter the dialing screen
and display the prefix number that you specified in the Value field. You can enter the
remaining digits and then dial out.
Local Group
You can use this key feature to quickly access a contact group in the local directory. For more
information, refer to Local Directory on page 103.
Dependencies:
Type (Key Event)
Key Type (Local Group)
Local Group (the contact group name you want to access)
Label (key label displayed on the touch screen)
Usage: Tap the local group key to access the contact group specified in the Local Group field.
XML Group
You can use this key feature to quickly access a remote group in your remote phone book. You
should configure a remote phone book in advance. For more information, refer to Remote
Phone Book on page 120.
Dependencies:
Type (Key Event)
Key Type (XML Group)
PhoneBook Name (the remote group name you want to access if the remote
phone book is configured)
Label (key label displayed on the touch screen)
Usage: Tap the XML group key to access the remote group specified in the XML Group field.
XML Browser
You can use this key feature to quickly access an XML browser. The XML browser allows you to
create custom services which meet your functional requirements on the server. You can
customize practical applications, such as weather report, stock information, Google search, etc.
Dependencies:
Type (Key Event)
Key Type (XML Browser)
Label (key label displayed on the touch screen)
Value (the access URL for XML browser)
Usage: Tap the XML Browser key to access the XML browser specified in the Value field.
User Guide for SIP-T58V/A Smart Media Phone
162
LDAP
You can use this key feature to quickly access a LDAP search screen.
Dependencies:
Type (Key Event)
Key Type (LDAP)
Label (key label displayed on the touch screen)
Usage:
1. Tap the LDAP key to access the LDAP search screen.
2. Enter a few continuous characters of the contact name or continuous numbers of the
contact number.
The contacts whose name or phone number matches the characters entered will appear on the
touch screen.
Conference
You can use this key feature to set up a conference call. For more information, refer to
Conference on page 309.
Dependencies:
Type (Key Event)
Key Type (Conference)
Label (key label displayed on the touch screen)
Value (the number added to the conference)
Usage: Tap the conference key during an active call to set up a conference with the number
specified in the Value field.
Note
Forward
You can use this key feature to forward an incoming call to someone else. For more information,
refer to Call Forward on page 292.
Dependencies:
Type (Key Event)
Key Type (FWD)
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Usage: Tap the forward key to forward an incoming call to the number specified in the Value
field.
Note
If the Value field is left blank, the forward key performs the same function as the FWD soft key
when receiving an incoming call.
If the Value field is left blank, the conference key performs the same function as Conference
during a call.
Customizing Your Phone
163
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the touch screen)
Value (the number you want to transfer to)
Usage:
When the transfer mode via Dsskey is Blind Transfer, tap the transfer key to complete the
blind transfer to the number specified in the Value field.
When the transfer mode via Dsskey is Attended Transfer, tap the transfer key to dial out
the number specified in the Value field, and then perform the attended or semi-attended
transfer.
When the transfer mode via Dsskey is New Call, tap the transfer key to place a new call to
the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the touch screen)
Usage:
1. Tap the hold key during an active call to place the call on hold.
2. Tap the hold key again to retrieve the held call.
DND
You can use this key feature to enable or disable DND. You can also use this key feature to
access the custom DND screen. For more information, refer to Do Not Disturb (DND) on page
287.
Dependencies:
Type (Key Event)
Key Type (DND)
Label (key label displayed on the touch screen)
Transfer mode via Dsskey is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the transfer key performs the same function as the TRANSFER key
or the Transfer soft key during a call. For more information, refer to Call Transfer on page 304.
User Guide for SIP-T58V/A Smart Media Phone
164
Usage:
When DND is in phone mode:
1. Tap the DND key to enable DND.
2. Tap the DND key again to disable DND.
When DND is in custom mode:
1. Tap the DND key to access the custom DND screen. You can enable or disable DND for one
or all accounts.
Group Listening
You can use this key feature to activate the Speakerphone and Handset/Headset mode at the
same time. It is suitable for group conversations which have more than one person at one side.
You are able to speak and listen through the handset/headset, while the others nearby can only
listen through the speaker.
Dependencies:
Type (Key Event)
Key Type (Group Listening)
Label (key label displayed on the touch screen)
Usage:
1. During a call, tap the group listening key to activate the group listening mode.
2. You can then speak and listen through the handset/headset, while other people at your
side can only listen through the speaker at the same time.
3. Tap the group listening key again to deactivate the group listening mode.
Zero Touch
You can use this key feature to quickly configure auto provision and network parameters.
Dependencies:
Type (Key Event)
Key Type (Zero Touch)
Label (key label displayed on the touch screen)
Usage:
1. Tap the zero touch key to access the zero touch screen.
2. Tap the OK soft key within a few seconds.
3. Configure the network parameters in the corresponding fields.
4. Tap the Next soft key.
5. Configure the auto provision parameters in the corresponding fields.
6. Tap the Next soft key.
The phone will reboot to update configurations.
URL
You can use this key feature to trigger the phone to send an HTTP GET request containing a
specific URL.
Dependencies:
Type (URL)
Customizing Your Phone
165
Label (key label displayed on the touch screen)
URL (the URL contained in the HTTP GET request)
Usage: Tap the URL key to trigger the phone to send an HTTP GET request containing the URL
specified in the URL field.
Phone Lock
You can use this key feature to immediately lock your phone instead of long pressing . For
more information, refer to Phone Lock on page 91.
Dependencies:
Type (Key Event)
Key Type (Phone Lock)
Label (key label displayed on the LCD screen)
Usage: When the phone lock feature is enabled, tap the phone lock key to immediately lock
your phone instead of long pressing .
Directory
You can use this key feature to easily access frequently used lists. For more information, refer to
Local Directory on page 103.
Dependencies:
Type (Key Event)
Key Type (Directory)
Label (key label displayed on the touch screen)
Usage: Tap the directory key to immediately access frequently used lists.
Note
Mobile Account
You can use this key feature to accept incoming mobile calls, place active mobile calls on hold
on your IP phone. For more information, refer to Bluetooth-Enabled Mobile Phone on page 143.
Dependencies:
Type (Mobile Account)
Label (key label displayed on the touch screen)
Usage: When the IP phone receives an incoming mobile call,
1. Tap the mobile account key to accept the incoming call.
2. Tap the mobile account key to place a new call and the active call is placed on hold.
Call Park
You can use this key to park a call directly during a call. For more information, refer to Call
Park/Retrieve on page 314.
Dependencies:
Type (Key Event)
Key Type (Call Park)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
The directory key performs the same function as the .
User Guide for SIP-T58V/A Smart Media Phone
166
Value (the park destination number or call park code)
Usage: Tap the call park key during a call to park the call.
Note
Retrieve Park
You can use this key to retrieve a parked call directly when the IP phone is idle. For more
information, refer to Call Park/Retrieve on page 314.
Dependencies:
Type (Retrieve)
Account ID (the account this feature will be applied to)
Label (key label displayed on the touch screen)
Value (the parked call destination number or retrieve code)
Usage: Tap the retrieve park key when the IP phone is idle to retrieve a parked call.
Note
Programable Keys
You can customize the function keys.
To customize a programable key via web user interface:
1. Click on DSSKey->Programable Key.
2. Customize specific features for these keys.
3. Click Confirm to accept the change.
You can click Reset to default to reset custom settings to defaults.
Then you can press the keys on the phone to perform the features you configured.
If the Value field is left blank, the Call Park key performs the same as the Park soft key during a
call.
If the Value field is left blank, the Park Retrieve key performs the same as the Retrieve key on
the dialing screen.
Customizing Your Phone
167
For example:
Switch Account Up
You can press Switch Account Up key to change the default account.
Dependencies: Type
(Switch Account Up)
Usage: Press the Switch Account Up key to scroll up the account list to select the desired
default account.
Switch Account Down
You can press Switch Account Down key to change the default account.
Dependencies:
Type (Switch Account Down)
Usage: Press the Switch Account Down key to scroll down the account list to select the desired
default account.
Note
Ext Keys
If EXP50 is connected to the phone, you can customize features for ext keys.
To customize ext keys via phone user interface:
1. Long press the desired key on the EXP50.
The IP phone touch screen will enter the user setting interface of this key.
2. Select the desired key type from the Type field.
3. (Optional.) Select the desired key event type from the Key Type field.
4. (Optional.) Select the desired line from the Account ID field.
5. (Optional.) Enter the string that will appear on the touch screen in the Label field.
6. (Optional.) Enter the corresponding value in the Value field.
Programable keys are configurable via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
168
7. (Optional.) Enter the corresponding value in the Extension field.
8. Tap to accept the change or to cancel.
Ext keys are configurable via web user interface at the path DSSKey->Ext Key.
For more information, refer to
Yealink EXP50 User Guide
.
Account Management
You can register one or multiple accounts on the SIP-T58V/A smart media phone. You can also
configure each line key to associate with an account or configure multiple line keys to associate
with an account.
Account Registration
To register an account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Accounts.
3. Tap the desired account.
4. Tap the Activation field.
5. Tap Enabled in the pop-up dialog box.
6. Enter the desired value in the Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively. Contact your system administrator for
more information.
7. If you use the outbound proxy servers, do the following:
1) Tap the Outbound Status field.
2) Tap Enabled in the pop-up dialog box.
3) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval field
respectively. Contact your system administrator for more information.
8. Tap to accept the change or to cancel.
Customizing Your Phone
169
You can repeat steps 3 to 8 to register more accounts.
The following figures demonstrate single or multiple accounts registered on the phone:
Single account:
Multiple accounts:
To disable an account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Advanced (default password: admin) ->Account.
3. Tap the desired account.
4. Tap the Activation field.
5. Tap Disabled in the pop-up dialog box.
6. Tap to accept the change or to cancel.
Account registration is configurable via web user interface at the path Account->Register.
User Guide for SIP-T58V/A Smart Media Phone
170
Default Account
To configure the default account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Default Account.
3. Tap the Default Account field.
4. Tap the desired account in the pop-up dialog box.
5. Tap to accept the change or to cancel.
The label of the default account is displayed on the left of the status bar. The IP phone will use
this account by default when dialing out.
You can also tap the label of the default account, and then tap the desired account to be the
new default account.
Note
Default account is configurable via phone user interface only.
Customizing Your Phone
171
Multiple Line Keys per Account
You can configure multiple line keys to associate with an account. This enhances call
visualization and simplifies call handling.
If this is the case, the touch screen will resemble the following figure:
Incoming calls to this account will be distributed evenly among the available line keys. Outgoing
calls will be distributed similarly.
Your phone can be configured to have a combination of accounts with a single line key and
accounts with multiple line keys.
Dial Plan
Dial plan is a string of characters that governs the way your SIP-T58V/A smart media phone
processes the inputs received from your phone keypad. The SIP-T58V/A smart media phone
supports the following dial plan features:
Replace Rule
Dial-now
User Guide for SIP-T58V/A Smart Media Phone
172
Area Code
Block Out
Basic expression syntaxes you need to know:
.
The dot "." can be used as a placeholder or multiple placeholders for any
character. Example:
"12." would match "123", "1234", "12345", "12abc", etc.
x
An "x" can be used as a placeholder for any character. Example:
"12x" would match "121", "122", "123", "12a", etc.
-
Numeric ranges are allowed within the brackets: Digit “-” Digit. Example:
“[5-7]” would match the number“5”, “6”or “7”.
[]
The square brackets "[]" can be used as a placeholder for a single character
which matches any of a set of characters. Example:
"91[5-7]1234" would match "9151234", "9161234", "9171234".
()
The parentheses "( )" can be used to group together patterns, for instance, to
logically combine two or more patterns. Example:
"([1-9])([2-7])3" would match "923", "153", "773", etc.
$
The “$” should be followed by the sequence number of a parenthesis. The “$”
plus the sequence number means the whole character or characters placed in
the parenthesis. The number directs to the right parenthesis when there are
more than one. Example:
A replace rule configuration, Prefix: "001(xxx)45(xx)", Replace: "9001$145$2".
When you dial out "0012354599" on your phone, the IP phone will replace the
number with "90012354599". “$1” means 3 digits in the first parenthesis, that
is, “235”. “$2” means 2 digits in the second parenthesis, that is, “99”.
Note
Replace Rule
You can configure one or more replace rules (up to 100) to remove the specified string and
replace it with another string. You can configure a pattern with wildcards (refer to the expression
syntax in the table above), so that any string that matches the pattern will be replaced. This
feature is convenient for you to dial out a long number. For example, a replace rule is configured
as “Prefix: 1“ and “Replace: 1234“, when you try to dial out the number “1234”, you just need to
enter “1” on the phone and then tap Send.
To add a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
The IP phone supports a new dial plan mechanism – digit map. Digit maps are defined by a single
string or a list of strings. If a number you dial matches any string of a digit map, the call is
automatically placed.
Note that if digit map feature is enabled, the old dial plan rules (described in this chapter) will be
ignored. For more information, contact your system administrator.
Customizing Your Phone
173
2. Enter the string (e.g., 1) in the Prefix field.
3. Enter the string (e.g., 1234) in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “1” and then tap Send, the phone will dial out “1234” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the checkbox.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select one or more replace rules by checking the checkbox(es).
3. Click Del to delete the replace rule(s).
Dial-now
You can configure one or more dial-now rules (up to 100) on your phone. When the dialed
number matches the dial-now string, the number will be dialed out automatically. For example,
a dial-now rule is configured as "2xx", any entered three-digit string beginning with 2 will then
The valid values for the Account field can be one or more digits among 1-16. Every two digits
must be separated by a comma. For example, when you enter the value “1, 2” in the Account
field, this replace rule will apply to account1 and account2.
If you leave the Account field blank or enter 0, the replace rule will apply to all accounts.
User Guide for SIP-T58V/A Smart Media Phone
174
be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value (e.g., 2xx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid values for the Account field, refer to Replace Rule on
page 172.
4. Click Add to add the dial-now rule.
When you enter the number “234”, the phone will dial out “234” automatically without the
pressing of any key.
Note
Delay Time for Dial-Now Rule
You can configure the delay time for dial-now rules. That is, you can configure your phone to
automatically dial out the phone number which matches a dial-now rule, after the designated
delay time.
To configure the delay time for dial-now rule via web user interface:
1. Click on Features->General Information.
2. Enter the time between 0 and 14 (seconds) in the Time-Out for Dial-Now Rule field.
You can also edit or delete the dial-now rule, refer to Replace Rule on page 172 for more
information.
Customizing Your Phone
175
The default value is “1”.
3. Click Confirm to accept the change.
Note
Area Code
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate geographical
areas in a country. This feature is necessary when dialing a phone number outside the code area.
For example, an area code is configured as "Code: 0592, Min Length: 1, Max Length: 15". When
you dial out the number "56789" (the length of the number is between 1 and 15), the phone will
add the area code and dial out the number "059256789". You can only configure one area code
rule on your phone.
To configure the area code and lengths via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15) fields.
3. Enter the desired line ID in the Account field or leave it blank.
Delay time for dial-now rule is configurable via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
176
For more information on the valid values for the Account field, refer to Replace Rule on
page 172.
4. Click Confirm to accept the change.
Note
Block Out
You can block some specific numbers (up to 10) from being dialed on your phone. When you
dial a block out number on your phone, the dialing will fail and the touch screen will prompt
"Forbidden Number".
To add a block out number via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid values for the Account field, refer to Replace Rule on
page 172.
4. Click Confirm to add the block out number.
The default value of minimum and maximum length is 1 and 15 respectively.
Customizing Your Phone
177
Emergency Number
Public telephone networks in countries around the world have a single emergency telephone
number (emergency services number), that allows a caller to contact local emergency services
for assistance when necessary. The emergency telephone number may differ from country to
country. It is typically a three-digit number so that it can be easily remembered and dialed
quickly. Some countries have a different emergency number for each of the different emergency
services.
You can specify the emergency telephone numbers on the IP phone for contacting the
emergency services in an emergency situation. You can dial these numbers when the phone is
locked. For more information on phone lock refer to Phone Lock on page 91.
Note
To specify emergency numbers via web user interface:
1. Click on Features->Phone Lock.
2. Enter the emergency number in the Emergency field.
For multiple emergency numbers, enter a comma between every two numbers. The default
emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
Note
Live Dialpad
You can enable live dialpad on the SIP-T58V/A smart media phone, which enables the IP phone
to automatically dial out a phone number without the pressing of the send key. You can also
configure a delay, where the phone will dial out the phone number automatically after the
Emergency number is configurable via web user interface only.
Contact your local phone service provider for available emergency numbers in your area.
The IP phone also supports the emergency dialplan, which allows users to make emergency calls
if the phone is locked or unregistered. For more information, contact your system administrator.
User Guide for SIP-T58V/A Smart Media Phone
178
designated period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or tapping the line key. You can also configure a delay, where the phone will dial out the
hotline number automatically after a designated period of time.
To configure the hotline number via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Hot Line.
3. Enter the desired number in the Number field.
4. Enter the desired delay time in the Hotline Delay field.
Live dialpad is configurable via web user interface only.
Customizing Your Phone
179
The default value is “4”.
5. Tap to accept the change or to cancel.
Hotline is configurable via web user interface at the path Features->General Information.
User Guide for SIP-T58V/A Smart Media Phone
180
System Applications
181
System Applications
The system applications are pre-installed on your phone and they cannot be uninstalled.
This chapter provides basic operating instructions for using the system applications. Topics
include:
Managing Applications and Widgets
Managing Running Applications
APP Accounts
FileManager
Gallery
Recorder
Camera
Email
Browser
Calendar
Calculator
Clock
Managing Applications and Widgets
Adding a Widget to the Idle Screen
The SIP-T58V/A smart media phone provides widgets like analog clock, calendar, digital clock,
email and photo gallery. You can conveniently add these widgets to the idle screen as preferred.
User Guide for SIP-T58V/A Smart Media Phone
182
To add a widget to idle screen:
1. Long tap the empty spot on the idle screen.
2. Tap WIDGETS.
3. Drag the desired widget up/down/left/right to the destination spot on the idle screen.
System Applications
183
If you want to add an email widget, and you have not registered an account on the Email or
Calendar application, a wizard will be provided for you to set up the email account step by
step. For more information, refer to Adding APP Accounts on page 188.
If you want to add a photo gallery widget, you will be required to choose the desired
images to display.
Before adding a widget to the idle screen, make sure the idle screen have enough space for
the widget. Otherwise the widget cannot be added and the touch screen will prompt “No
more room on this Home screen”.
Resizing a Widget
Certain widgets such as calendar, digital clock and email can be resized on the idle screen.
To resize a widget:
1. Long tap the desired widget for about 2 seconds, and then lift your finger from the screen.
User Guide for SIP-T58V/A Smart Media Phone
184
This will bring up the white frame as shown below:
2. Drag the border of the frame to adjust the size.
Moving an Application or Widget
You can move an application or widget to a different spot on the idle screen or to a different
idle screen.
Before moving an application or widget, you should know the following:
You can drag an application or widget to the rightmost of three idle screens to add an idle
screen.
If there is only one application or widget on the screen, you cannot drag the application or
widget to the rightmost of three idle screens to add an idle screen.
The idle screen (except the home screen) will be deleted automatically if there is no
application or widget on the screen.
To move an application or widget:
1. Long tap the desired item for about 2 seconds.
System Applications
185
2. Drag the item up/down/left/right to the destination spot on the screen.
Removing a Widget from the Idle Screen
Removing operation only removes the widget of the application on the screen. The application
itself will not be uninstalled.
To remove a widget from the idle screen:
1. Long tap the desired item for about 2 seconds.
The Remove field will appear on the top of the touch screen.
2. Drag the item to the Remove field to remove it.
Creating a Folder
You can create a folder to organize your applications. For example, you can place the same kind
of applications in a folder.
User Guide for SIP-T58V/A Smart Media Phone
186
To create a folder:
1. Drag an application icon over another application icon.
2. Lift your finger when a folder frame appears around the applications.
A new folder containing the selected applications is automatically created.
System Applications
187
You can do the following:
- Drag another application icon to the folder to add more applications into the folder.
- Tap the folder and then drag an application icon in the folder to the destination spot
on the idle screen to move the application from the folder to the idle screen.
The folder will be deleted automatically if there is only one application in the folder.
To rename a folder:
1. Tap the desired folder to expand the folder.
2. Tap the Unnamed Folder field.
3. Enter the desired folder name.
4. Tap Done on the onscreen keyboard.
5. Tap the blank area of the touch screen.
The folder name is renamed.
User Guide for SIP-T58V/A Smart Media Phone
188
Managing Running Applications
You can tap to view and manage the list of recently used applications that are still running in
the background. You can do the following:
- Swipe the desired application left or right to stop the running application.
- Tap to stop all running applications.
- Tap the desired application to access the application.
If there are no running applications, the touch screen will prompt “Your recent screens appear
here”.
APP Accounts
Email and Calendar applications require a registered account. You can create accounts to have
the best experience with your phone. You can also sync the account information or remove the
account.
Adding APP Accounts
To add an app account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
System Applications
189
2. Tap Settings->Basic->APP accounts.
3. Tap Add account.
4. Tap a desired account type.
5. Enter the email address.
6. Tap Next or Manual setup.
User Guide for SIP-T58V/A Smart Media Phone
190
7. Choose the email account type.
POP3: When using POP3, all emails are stored locally instead of the server side. Please
check with your network administrators for the correct email account settings for POP3.
IMAP: When using IMAP, all emails are stored on the server side and users can see
them from the IP phone or other mail clients as well. Please check with your network
administrators for the correct email account settings for IMAP.
Exchange: When using Exchange, all emails are stored in the central Exchange mail
server and can be checked using capable mail client such as Microsoft Outlook. Please
check with your network administrators for the correct email account settings for Exchange.
8. Enter the password and then tap NEXT.
System Applications
191
9. Configure the incoming server settings.
10. Tap Next.
11. Configure the outgoing server settings.
12. Tap Next.
13. Configure the account options.
User Guide for SIP-T58V/A Smart Media Phone
192
14. Tap Next.
15. Enter the string in the Your name field as the sender name.
16. Tap Next.
You are able to start using the email account now.
Syncing APP Account Information
To sync account information via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->APP accounts.
User Guide for SIP-T58V/A Smart Media Phone
194
In this example, it will only sync ll50466499@sina.com information.
Removing APP Accounts
To remove an app account via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Basic->APP accounts.
System Applications
195
3. Tap a desired account type.
4. Tap a desired account.
5. Tap and then tap Remove account.
The following prompt will appear on the touch screen of the phone:
6. Tap Remove account to accept the change or Cancel to cancel.
FileManager
FileManager is a tool that allows you to view, search, delete, copy or move photo/video/audio
files. You can also share files via Bluetooth or email. It helps you to access and manage files in
internal SD card as well as USB flash drive. For more information on how to connect the USB
flash drive to your phone, refer to Phone Installation on page 31.
User Guide for SIP-T58V/A Smart Media Phone
196
Viewing Files
To view pictures:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Photos in the Local Storage field.
If a USB flash drive has been connected to your phone, you can tap Photos in the USB
Storage field to view the pictures stored in USB flash drive.
Your pictures will display as a list.
4. Tap the desired picture to view.
The IP phone will automatically launch Gallery application to preview the picture.
You can set the picture as wallpaper, print the picture and/or view detail information of the
picture. For more information, refer to Setting a Picture as Wallpaper on page 213, Printing
Pictures on page 215 and/or Viewing Detail Information of the Pictures/Videos on page 215.
System Applications
197
To view videos:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Videos in the Local Storage field.
If a USB flash drive has been connected to your phone, you can tap Videos in the USB
Storage field to view the videos stored in USB flash drive.
Your videos will display as a list.
4. Tap the desired video to play.
The IP phone will automatically launch Gallery application to view the video.
During the playing, you can do the following:
- Tap the touch screen. Then appears on the touch screen.
Tap to pause the playing. Then appears on the touch screen.
Tap to continue the playing.
- Drag the slider to skip forward the playing or rewind the playing.
User Guide for SIP-T58V/A Smart Media Phone
198
- Press to adjust the media volume.
Note
To view audios:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Audios in the Local Storage field.
If a USB flash drive has been connected to your phone, you can tap Audios in the USB
Storage field to view the audios stored in USB flash drive.
Your audios will display as a list.
The menu keys and Android keys will disappear within 5 seconds, you may tap the touch screen
to show them again.
System Applications
199
4. Tap the desired audio to play.
During the playing, you can do the following:
- Tap to pause the playing. Then appears on the touch screen.
Tap to continue the playing.
- Drag the slider to skip forward the playing or rewind the playing.
- Press to adjust the volume of the speakerphone.
- Tap to stop the playing.
You can also swipe down from the top of the screen to enter the control center, and then tap
USB to launch FileManager application to view the files if you have connected a USB flash drive
to the phone.
Searching Files
To search files:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
User Guide for SIP-T58V/A Smart Media Phone
200
3. Tap on the top-right of the screen.
4. Enter one or more continuous characters of the file name.
The file whose name matches the entered characters will appear on the touch screen. You
can drag up and down to scroll through the searching results, and then tap the desired
result to view the file.
Copying Files
You can copy the files that stored in the USB flash drive to internal SD card, or copy the files that
stored in internal SD card to the USB flash drive.
To copy files:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Photos/Videos/Audios in Local Storage field.
System Applications
201
If a USB flash drive has been connected to your phone, you can tap
Photos/Videos/Audios in the USB Storage field to view the files stored in USB flash drive.
Your files will display as a list.
4. Drag up and down to scroll through the files if required.
5. Tap the checkbox(es) before the desired file(s).
6. Tap .
The following prompt will appear on the touch screen of the phone:
7. Tap the desired storage device to copy the file to.
8. Tap to accept the change or to cancel.
User Guide for SIP-T58V/A Smart Media Phone
202
If the file has been copied successfully, the touch screen will prompt “Copy successfully”.
You can also tap the Select All checkbox to copy all files.
Cutting Files (Moving Files)
The operating instructions on moving a file are similar to copying a file. The difference is that
once the file is moved, the file will not be kept in the source storage device.
To cut files:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Photos/Videos/Audios in Local Storage field.
If a USB flash drive has been connected to your phone, you can tap
Photos/Videos/Audios in the USB Storage field to view the files store in USB flash drive.
Your files will display as a list.
4. Drag up and down to scroll through the files if required.
5. Tap the checkbox(es) before the desired file(s).
System Applications
203
6. Tap .
The following prompt will appear on the touch screen of the phone:
7. Tap the destination storage device.
8. Tap to accept the change or to cancel.
If the file is cut successfully, the touch screen will prompt “Cut successfully”.
You can also tap the Select All checkbox to cut all files.
Deleting Files
To delete files:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch FileManager application.
3. Tap Photos/Videos/Audios in Local Storage field.
If a USB flash drive has been connected to your phone, you can tap
Photos/Videos/Audios in the USB Storage field to view the files store in USB flash drive.
User Guide for SIP-T58V/A Smart Media Phone
204
Your files will display as a list.
4. Drag up and down to scroll through the files if required.
5. Tap the checkbox(es) before the desired file(s).
6. Tap .
The following prompt will appear on the touch screen of the phone:
7. Tap OK to accept the change or Cancel to cancel.
You can also tap the Select All checkbox to delete all files.
Sharing Pictures/Videos/Audios
You can share pictures/videos/audios with other device via Bluetooth or email. Before sharing
pictures/videos/audios via Bluetooth, make sure the Bluetooth device is discoverable.
The operating instructions on sharing pictures, video and audios are the same, the following
take sharing pictures as example.
To share picture(s) via Bluetooth:
1. Swipe left or right to go to the second idle screen.
System Applications
205
2. Tap to launch FileManager application.
3. Tap Photos in the Local Storage field.
If a USB flash drive has been connected to your phone, you can tap Photos in the USB
Storage field to view the pictures stored in USB flash drive.
Your pictures will display as a list.
4. Drag up and down to scroll through the files if required.
5. Tap the checkbox(es) before the desired picture(s).
6. Tap .
7. Tap Bluetooth and then tap Always or Just once.
User Guide for SIP-T58V/A Smart Media Phone
206
The IP phone scans and displays the available Bluetooth device automatically.
If there is no Bluetooth device found on the touch screen, tap and then Refresh to
search for the Bluetooth devices.
Note
8. Tap the desired Bluetooth device to share the pictures.
The touch screen will prompt “Sending n file to “XXX”” (n represents the number of
pictures that is being send).
9. Accept the Bluetooth file transfer request on the Bluetooth device.
If the Bluetooth mode of the IP phone is deactivated, the touch screen will prompt “To use
Bluetooth services, you must first turn on Bluetooth. Turn on Bluetooth now?”. Tap Turn on to
activate the Bluetooth mode.
System Applications
207
If the pictures are successfully transferred, the notification center will display a notification
“Bluetooth share: Sent files n successful, n unsuccessful.” (n represents the number of files
that are sent successfully or unsuccessfully).
You can tap the notification to view the detail information about the shared pictures.
To share picture(s) via email:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
3. Tap Photos in the Local Storage field.
If a USB flash drive has been connected to your phone, you can tap Photos in the USB
Storage field to view the pictures stored in USB flash drive.
Your pictures will display as a list.
4. Drag up and down to scroll through the files if required.
5. Tap the checkbox(es) before the desired picture(s).
User Guide for SIP-T58V/A Smart Media Phone
208
6. Tap .
7. Tap Email and then tap Always or Just once.
8. (Optional.) Sign in an email account if required (refer to Adding APP Accounts).
9. Compose the Email.
10. Enter the email account you want to send the email to in the To field.
11. (Optional.) Enter the email subject in the Subject field.
12. Tap to send the email.
The pictures are transferred as mail attachment. The attachment files size must be within 5MB.
You can also share pictures with other devices via Bluetooth or email when previewing the
pictures. And the operating instructions are the same with sharing pictures by Gallery
application. For more information, refer to Sharing Pictures/Videos on page 219.
Gallery
You can use Gallery application to view pictures/videos stored in internal SD card/USB flash
drive or take pictures/videos. You can also perform basic editing tasks on pictures or set the
desired picture as the wallpaper. The pictures/videos can be shared with friends via Bluetooth or
System Applications
209
email.
Viewing Pictures/Videos
To view pictures/videos:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
By default, the pictures/videos are displayed as thumbnails in an albums arrangement
mode.
3. (Optional.) Tap Albums.
You can tap Albums/Locations/Times/People/Tags to view the pictures/videos in
different arrangement modes.
4. Swipe left/right to view all albums if required.
User Guide for SIP-T58V/A Smart Media Phone
210
5. You can do the following:
- If you tap a picture album, you can do the following:
Tap the album name on top-left of the touch screen.
Tap Filmstrip view or Grid view to view the pictures in different modes.
Tap and then tap Slideshow to start a slide show of the pictures in the album.
Tap and then tap Group by.
Tap a desired group type in the pop-up dialog box to view the pictures in
different arrangement modes.
Tap a desired picture to preview the picture.
- If you tap a video album, you can do the following:
Tap the album name on top-left of the touch screen.
System Applications
211
Tap Filmstrip view or Grid view to view the videos in different mode.
Tap and then tap Group by.
Tap a desired group type in the pop-up dialog box to view the videos in different
arrangement modes.
User Guide for SIP-T58V/A Smart Media Phone
212
Tap a desired video.
Videos show the icon on the preview thumbnail. Tap to play the video.
Editing Pictures
To edit a picture:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
3. Tap a desired picture album.
4. Tap the desired pictures.
5. You can do the following:
- Tap and then tap Rotate left/Rotate right to rotate the picture left/right.
- Tap and then tap Crop to resize the picture.
- Tap and then tap Edit.
The touch screen will display as below:
System Applications
213
You can do the following:
- Tap to add filters.
- Tap to add a picture frame.
- Tap .
Tap Crop to resize the picture.
Tap Straighten to straighten the picture.
Tap Rotate to rotate the picture clockwise.
Tap Mirror to flip the picture symmetrically.
Tap Draw to draw the picture.
- Tap to adjust the exposure, contrast, saturation, etc.
6. Tap SAVE to accept the change.
Note
Setting a Picture as Wallpaper
To set a picture as wallpaper:
1. Preview the picture (refer to Viewing Pictures/Videos).
The menu keys and Android keys will disappear within 5 seconds, you may tap the touch screen
to show them again.
User Guide for SIP-T58V/A Smart Media Phone
214
2. Tap .
The touch screen will display as below:
3. Tap Set picture as.
4. Do one of the following:
Tap Wallpaper and then tap Set wallpaper to set the picture as phone wallpaper.
Tap Exp Background and then tap Set as exp background to set the picture as EXP
wallpaper.
Note
The menu keys and Android keys will disappear within 5 seconds, you may tap the touch screen
to show them again.
System Applications
215
Printing Pictures
To print a picture:
1. Preview the picture (refer to Viewing Pictures/Videos).
2. Tap .
The touch screen will display as below:
3. Tap Print to print the picture.
Before printing the picture, make sure your phone has connected to the network printer.
For more information, refer to the documentation from the printer manufacturer.
Viewing Detail Information of the Pictures/Videos
The operating instructions on viewing detail information of pictures and videos are the same,
the following take viewing detail information of pictures as example.
System Applications
217
4. Tap Close to close the pop-up box.
Deleting Pictures/Videos
The operating instructions on deleting pictures and videos are the same, the following take
deleting pictures as example.
To delete picture(s):
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
3. Tap a desired picture album.
4. Do one of the following:
- Long tap one of the pictures.
Tap on other pictures to select multiple pictures.
- Tap and then tap Select item.
Tap the desired picture(s) to select multiple pictures.
User Guide for SIP-T58V/A Smart Media Phone
218
You can also tap n items selected (n represents the number of pictures you selected)
and then tap Select all to select all pictures.
5. Tap to delete the selected picture(s).
The touch screen prompt “Delete selected item?”.
6. Tap OK to accept the change or Cancel to cancel.
Taking a Picture/Video
Before taking a picture/video, you should connect the camera to the IP phone. For more
information on how to connect the camera, refer to Insert the camera on page 32.
To take a picture/video:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
System Applications
219
3. Tap on the top-right of the touch screen.
4. Take a picture or video (refer to Taking Pictures or Recording Videos).
Sharing Pictures/Videos
You can share pictures/videos with other Bluetooth devices via Bluetooth or email. Before
sharing pictures/videos via Bluetooth, make sure the Bluetooth device is discoverable.
The operating instructions on sharing pictures and sharing video are the same, the following
take sharing pictures as example.
To share picture(s) via Bluetooth:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
3. Tap a desired picture album.
4. Do one of the following:
- Long tap one of the pictures.
Tap on other pictures to select multiple pictures.
User Guide for SIP-T58V/A Smart Media Phone
220
- Tap and then tap Select item.
Tap the desired picture(s) to select multiple pictures.
You can also tap n items selected (n represents the number of pictures you selected)
and then tap Select all to select all pictures.
5. Tap .
System Applications
221
6. Tap Bluetooth.
The IP phone scans and displays the available Bluetooth device automatically.
If there is no Bluetooth device found on the touch screen, tap and then Refresh to
search for the Bluetooth devices.
Note
7. Tap the desired Bluetooth device to share the pictures.
The touch screen will prompt “Sending n file to “XXX”” (n represents the number of
pictures that is being send).
8. Accept the Bluetooth file transfer request on the Bluetooth device.
If the Bluetooth mode of the IP phone is deactivated, the touch screen will prompt “To use
Bluetooth services, you must first turn on Bluetooth. Turn on Bluetooth now?”. Tap Turn on to
activate the Bluetooth mode.
User Guide for SIP-T58V/A Smart Media Phone
222
If the pictures are successfully transferred, the notification center will display a notification
“Bluetooth share: Sent files n successful, n unsuccessful.” (n represents the number of files
that are sent successfully or unsuccessfully).
You can tap the notification to view the detail information about the shared pictures.
To share picture(s) via email:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Gallery application.
3. Tap a desired picture album.
4. Do one of the following:
- Long tap one of the pictures.
Tap on other pictures to select multiple pictures.
- Tap and then tap Select item.
Tap the desired picture(s) to select multiple pictures.
System Applications
223
You can also tap n items selected and then tap Select all to select all pictures.
5. Tap .
6. Tap Email.
7. (Optional.) Sign in an email account if required (refer to Signing In Email).
8. Compose the Email.
9. Enter the email account you want to send the email to in the To field.
10. (Optional.) Enter the email subject in the Subject field.
11. Tap SEND to send the email.
The pictures are transferred as mail attachment. The attachment files size must be within
5MB.
Recorder
You can use Recorder application to record audios and manage the recorded audios. During
recording, you can mark specific moments so that you can quickly find and listen to them later.
There is a time limit (12 hours) on the recorder. The recorded audios are saved with the name
consisting of a prefix “record@” and date & time stamp, for example, record@20160303-092310
User Guide for SIP-T58V/A Smart Media Phone
224
was created on March 3, 2016, at 09:23:10.
By default, the recorded audios are saved in the internal SD card. But if there is a USB flash drive
connected to your phone, the recorded audios will be saved according to the priority: USB flash
drive>internal SD card.
Note
Recording Audios
To record an audio:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Recorder application.
3. Tap to start recording.
4. You can do one of the following:
- Tap to pause the recording, and then tap to resume the recording.
The recorded audios are saved in *.amr format. You can play the recorded audios on either the
phone itself or on a computer using an application capable of playing *.amr files.
System Applications
225
- Tap to set a mark.
The icon changes to , the number will increase if you set more marks. And there
is a red flag on this moment when playing the recorded audio.
5. Tap to end the recording and save the recorded audio, or tap to cancel the
recording.
The recorded audio will be displayed on the right list automatically.
Managing Recorded Audios
You can also use the Recorder application to play/delete/rename the recorded audios.
To play the recorded audio:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Recorder application.
The recorded audios will display as a list.
3. Tap before the desired recorded audio to play the recorded audio.
User Guide for SIP-T58V/A Smart Media Phone
226
During the playing, you can do the following:
- Tap to pause the playing.
To continue the playing, tap .
- Drag the slider to skip forward the playing or rewind the playing.
- Drag the slider to the position with red flag to listen to the marked moments.
- Press to adjust the volume of the speakerphone.
- Tap to stop the playing.
To delete the recorded audio:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Recorder application.
The recorded audios will display as a list.
System Applications
227
3. Tap after the desired recorded audio.
4. Tap Delete to delete the recorded audio.
The touch screen prompt “Are you sure to delete?”.
5. Tap OK to accept the change or Cancel to cancel.
If you want to delete all recorded audios, tap on the top-right of the touch screen.
To rename a recorded audio:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Recorder application.
User Guide for SIP-T58V/A Smart Media Phone
228
The recorded audios will display as a list.
3. Tap after the desired recorded audios.
4. Tap Rename.
5. Enter the desired file name.
6. Tap OK to accept the change or Cancel to cancel.
Camera
The IP phone supports taking pictures and recording videos via camera. For more information
on how to connect the camera, refer to Insert the camera on page 32. The pictures/videos taken
by camera are saved in the internal SD card. And the pictures are saved with the name
consisting of a prefix “IMG” and date & time stamp, for example, IMG_20160303-111413 was
created on March 3, 2016, at 11:14:13. The videos are saved with the name consisting of a prefix
“VID” and date & time stamp, for example, VID_20160303-112328 was created on March 3, 2016,
at 11:23:28.
Note
The pictures/videos taken by camera are saved in *.jpg/*.mp4 format. You can view the
pictures/videos on either the phone itself or on a computer using an application capable of
viewing *.jpg/*.mp4 files.
System Applications
229
Taking Pictures
To take a picture:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Camera application.
3. (Optional.) Tap and then do the following:
- Tap to turn on the camera grid.
- Tap to configure the camera timer.
4. Tap to take a picture.
The IP phone will play a tone. You can swipe left to view all pictures taken by the camera.
Recording Videos
To record a video:
1. Swipe left or right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
230
2. Tap to launch Camera application.
3. Swipe right and then tap Video.
4. (Optional.) Tap and then tap to turn on the camera grid.
5. Tap to start recording.
The IP phone will play a tone and recording time will appear on the left-top of the touch
screen.
6. Tap to stop recording.
The IP phone will play a tone. You can swipe left to view all videos taken by the camera.
Camera Settings
To configure camera settings:
1. Swipe left or right to go to the second idle screen.
System Applications
231
2. Tap to launch Camera application.
3. Swipe right.
4. Tap .
User Guide for SIP-T58V/A Smart Media Phone
232
5. You can do the following:
- Tap Resolution & quality to configure the resolution of the camera.
- Tap Advanced and then tap Manual exposure to configure whether to use manual
exposure.
Email
You can use Email application to access personal or business email account, and send/receive
emails. Before signing in email, you should configure the type of your email account.
Signing In Email
When launching the Email application for the first time, a wizard will be provided for you to set
up the email account step by step.
To sign in email:
1. Do one of the following:
- Swipe left or right to go to the second idle screen.
Tap to launch Email application.
- Swipe left or right to go to the third idle screen.
Tap the email widget.
2. Sign in email, refer to Adding APP Accounts.
Sending Emails
To send an email:
1. Swipe left or right to go to the second idle screen.
System Applications
233
2. Tap to launch Email application.
3. Tap .
4. Compose the email.
5. Enter the email account you want to send the email to in the To field.
6. (Optional.) Enter the email subject in the Subject field.
User Guide for SIP-T58V/A Smart Media Phone
234
7. (Optional.) Tap and then tap Attach file to add a file as mail attachment.
The attachment file size must be within 5MB.
8. Tap to send the email.
Reading Emails
If there is an incoming email, the IP phone will play a notification sound. And there is an
incoming email notification on the notification center, you can tap the notification to read the
email.
To read an email:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Email application.
If the email you want to read is not in the inbox, you can tap on the top-left of the
touch screen to select the folder that contains the email you want to read.
System Applications
235
3. Tap the desired email to read.
Deleting Emails
To delete an email:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Email application.
If the email you want to delete is not in the inbox, you can tap on the top-left of the
touch screen to select the folder that contains the email you want to delete.
3. Long tap the desired email.
User Guide for SIP-T58V/A Smart Media Phone
236
4. Tap to delete the email.
You can tap UNDO to cancel the deletion.
Email Options
To use the email options:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Email application.
If the email you want to configure is not in the inbox, you can tap on the top-left of
the touch screen to select the folder that contains the email you want to configure.
3. You can do the following:
- Tap / to mark the email as unread/read.
- Tap and then tap Print to print the email.
- Long tap the desired email.
Tap and then tap Add star to star the email.
System Applications
237
Multiple Email Accounts
You can add more than one email account on the IP phone.
To add another email account on the IP phone:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Email application.
3. Tap on the top-left of the touch screen.
4. Tap Settings->Add account.
A new email account setup wizard will show up. For more information, refer to Adding APP
Accounts on page 188.
Once another email account is successfully added, the touch screen will display as below:
You can tap on the bottom-left of the touch screen to switch between the email
accounts.
User Guide for SIP-T58V/A Smart Media Phone
238
Email Widget
You should sign in the email if you have not registered an email account. For more information,
refer to Adding APP Accounts on page 188.
After you sign in the email, you can choose the desired folder to display on the widget. If you
add an email widget to display the unread emails, then you want the widget to display the
incoming emails, you should add a new widget.
To use the email widget:
1. Swipe left or right to go to the third idle screen.
2. Tap the email widget.
3. Tap the desired account, if you have more than one email account.
System Applications
239
4. Tap the desired folder to display on the widget.
If you select Inbox, the email widget will display as below:
You can drag up and down to scroll through emails in inbox folder, and tap the desired
email to view. You can also tap on the top-right of the widget to compose and send an
email.
Sending Files via Email
The Gallery and FileManager applications support data transfer via Email. You can send
pictures, audios or videos as mail attachments to other account. For more information, refer to
Sharing Pictures/Videos/Audios on page 204 and Sharing Pictures/Videos on page 219.
Browser
The Browser application could be used in a similar way as a PC-based web browser, i.e., browse
web pages, bookmarks, set home pages, clear history and etc. The default home page is the
Yealink website.
Browsing a Web Page
To browse a web page:
1. Swipe left or right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
240
2. Tap to launch Browser application.
3. Enter a part of URL in the address input field of the browser.
The phone will automatically retrieve and list similar websites.
4. Tap the website you want to visit or enter the full URL then tap Go on the onscreen
keyboard to browse the web page.
5. You can do the following:
- Scroll up/down to view the web page.
- Pinch open or pinch close the web page.
Managing Bookmarks
You can bookmark the web pages that you frequently visit.
System Applications
241
To add a web page to the bookmarks list:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Browser application.
3. Open the web page you want to bookmark.
4. Tap .
5. Edit the bookmark information in corresponding fields.
6. Tap OK to accept the change.
Then the web page is added to the BOOKMARKS list.
To open a web page from the bookmarks list:
1. Swipe left or right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
242
2. Tap to launch Browser application.
3. Tap to access the BOOKMARKS list.
There are some pre-configured bookmarks by default.
4. Tap the web page you want to visit.
To edit a bookmark:
1. Swipe left or right to go to the second idle screen.
System Applications
243
2. Tap to launch Browser application.
3. Tap to access the BOOKMARKS list.
There are some pre-configured bookmarks by default.
4. Long tap the bookmark you want to edit.
5. Tap Edit bookmark in the pop-up dialog box.
User Guide for SIP-T58V/A Smart Media Phone
244
6. Edit the bookmark.
7. Tap OK to accept the change or Cancel to cancel.
To delete a bookmark:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Browser application.
3. Tap to access the BOOKMARKS list.
There are some pre-configured bookmarks by default.
4. Long tap the bookmark you want to delete.
5. Tap Delete bookmark in the pop-up dialog box.
6. Tap OK to accept the change or Cancel to cancel.
Setting a Home Page
You can set the web page you visit most frequently as the home page. Then, each time you
open the browser, this web page is automatically opened.
System Applications
245
To set a home page:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Browser application.
3. Tap .
4. Tap Settings->General->Set homepage.
User Guide for SIP-T58V/A Smart Media Phone
246
5. Tap the web page you want to set as the home page in the pop-up dialog box.
You can also long tap a web page in BOOKMARKS list and then tap Set as homepage.
Clearing the Navigation History
You can periodically clear your navigation history to protect your privacy and prevent
information disclosure.
To clear the navigation history:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Browser application.
3. Tap .
4. Tap Settings->Privacy & security->Clear history.
System Applications
247
The touch screen prompt “Delete the browser navigation history?”.
5. Tap OK to accept the change or Cancel to cancel.
Modifying Browser Settings
To modify browser settings:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Browser application.
3. Tap .
4. Tap Settings.
5. Customize the browser style you prefer.
Calendar
You can use the Calendar application to synchronize events from email account as well as
creating, modifying and viewing the events. The IP phone also provides notification for the
User Guide for SIP-T58V/A Smart Media Phone
248
upcoming events from the Calendar.
Signing In Calendar
Before creating an event, you should sign in an email account first. If you have registered an
account on the Email application already, you can skip this operation.
To sign in calendar:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Calendar application.
3. Tap .
4. Tap Add account.
5. Sign in the Calendar, refer to Adding APP Accounts.
System Applications
249
Creating an Event
To create an event:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Calendar application.
3. Tap a desired date.
4. Tap .
5. Edit the event.
6. Tap DONE to accept the change or CANCEL to cancel.
Checking Events
On the calendar screen, you can check the information about an event you have added.
To view calendar:
1. Swipe left or right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
250
2. Tap to launch Calendar application.
3. (Optional.) Tap on the top-left of the touch screen.
Tap Day/Week/Month/Agenda to select different time format to view the calendar.
In the agenda view, the events you have added are displayed as a list. You can tap Touch to
view events before XXX/Touch to view events after XXX to view all events.
System Applications
251
Modifying the Calendar Settings
To modify the calendar settings:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Calendar application.
3. Tap .
4. Tap Settings.
5. Customize the general settings and account settings.
Calculator
You can use the Calculator application to perform simple or complex calculations.
To access the calculator application:
1. Swipe left or right to go to the second idle screen.
User Guide for SIP-T58V/A Smart Media Phone
252
2. Tap to launch Calculator application.
Clock
You can use the Clock application to set an alarm, check the time of other cities in the world,
calculate the lasting time of an event and set a timer.
Alarm
To set an alarm clock:
1. Tap the digital clock widget on the home screen.
System Applications
253
2. Tap on the top-left of the touch screen.
3. Tap .
4. Tap the desired number to enter the alarm time.
5. Tap OK.
The alarm clock you have set is displayed on the touch screen.
User Guide for SIP-T58V/A Smart Media Phone
254
6. Tap the Label field and then enter a label for an alarm.
7. Tap the REPEAT radio box and then tap the repeat day of the alarm.
8. Tap and then select a desired ringtone for alarm.
Note
To edit an alarm clock:
1. Tap the digital clock widget on the home screen.
2. Tap on the top-left of the touch screen.
3. Drag up and down to scroll through alarms.
4. Select a desired alarm.
5. Tap the desired option to edit the alarm clock.
If you have set the time format as 12 Hour, you need to select AM or PM when setting the alarm
time. For more information on time format, refer to Time & Date on page 87.
System Applications
255
To delete an alarm clock:
1. Tap the digital clock widget on the home screen.
2. Tap on the top-left of the touch screen.
3. Select a desired alarm.
4. Tap on the bottom-left of the alarm to delete the desired alarm.
You can tap UNDO to cancel the deletion.
User Guide for SIP-T58V/A Smart Media Phone
256
To configure the alarm sound parameters:
1. Tap the digital clock widget on the home screen.
2. Tap on the top-left of the touch screen.
3. Tap and then tap Settings.
4. You can do the following:
- Tap the Silence after field, and then tap the desired lasting time of the alarm bell in the
pop-up dialog box. The alarm clock will automatically stop after this specified period of
time.
- Tap the Snooze length field, and then tap the desired snooze time after the alarm clock
rings in the pop-up dialog box.
- Tap the Alarm volume field, and then drag the slider to adjust the alarm volume.
- Tap the Volume buttons field, and then configure the desired function for the Volume
key when the alarm is ringing.
Snooze: Press when the alarm is ringing, the alarm will stop and ring
after a specified period of time.
Dismiss: Press when the alarm is ringing, the alarm will stop.
Do nothing: Press when the alarm is ringing, the alarm will still ring.
Clock
To add the clock of other cities in the world:
1. Tap the digital clock widget on the home screen.
System Applications
257
The touch screen displays the current date and time.
2. Tap .
3. Drag up and down to scroll through the cities.
4. Tap the checkbox before the desired city.
5. Tap to return to the clock screen.
User Guide for SIP-T58V/A Smart Media Phone
258
The added clock of the desired city displays on the touch screen.
To configure the clock display mode:
1. Tap the digital clock widget on the home screen.
2. Tap and then tap Settings.
3. You can do the following:
- Tap the Style field.
Tap Analog or Digital in the pop-up dialog box.
- Mark the Automatic home clock radio box.
Tap the Home time zone field.
Tap a desired time zone in the pop-up dialog box for the home clock.
System Applications
259
Timer
To set a timer:
1. Tap the digital clock widget on the home screen.
2. Tap .
3. Enter the time by tapping the digits on the right of the screen.
You can tap to delete the entered numbers.
User Guide for SIP-T58V/A Smart Media Phone
260
4. Tap .
When the timer is running, you can do the following:
- Tap to add an additional minute.
- Tap to pause the timer, then you can do the following:
Tap to resume the timer.
Tap to restart the timer.
- Tap to delete the current timer.
The timer beeps when the time is up. It keeps beeping until you tap to stop.
Stopwatch
To set a stopwatch:
1. Tap the digital clock widget on the home screen.
System Applications
261
2. Tap .
3. Tap to start the stopwatch.
4. You can do the following:
- Tap to pause the stopwatch.
Tap to reset the stopwatch.
Tap and then tap Bluetooth or Email to share the record via Bluetooth or
email. For more information, refer to Sending Files via Bluetooth on page 149 and
Sending Files via Email on page 239.
- Tap to add laps while the stopwatch is running.
User Guide for SIP-T58V/A Smart Media Phone
262
Basic Phone Features
263
Basic Phone Features
The SIP-T58V/A smart media phone is designed to be easily used like a regular phone on a
public switched telephone network (PSTN). You can place calls, answer calls, transfer a call to
someone else, or conduct a conference call.
This chapter provides basic operating instructions for the SIP-T58V/A smart media phone.
Topics include:
Placing Calls
Answering Calls
Audio-only/Video Selection
Ending Calls
Performing Operations during a Call
Changing Video Call Settings
Redialing Numbers
Recent Call In Dialing
Auto Answer
Auto Redial
Call Completion
Recall
Call Mute/Un-mute
Call Hold/Resume
Do Not Disturb (DND)
Call Forward
Call Transfer
Call Waiting
Conference
Call Park/Retrieve
Call Pickup
Anonymous Call
Anonymous Call Rejection
User Guide for SIP-T58V/A Smart Media Phone
264
Placing Calls
You can place a call in one of three ways using your SIP-T58V/A smart media phone:
- Using the handset
- Using the speakerphone
- Using the headset
You can also dial the number first, and then choose the way you want to speak to the other
party.
You can also dial an entry/contact from call history, local directory or remote phone book. For
more information, refer to Contact Management on page 102 and Call History Management on
page 126.
By default, you can set up a video call with the other party that is video-enabled. The IP phone
can set up video calls with only two parties (even if more than two parties that set up a call with
you can send video). If you do not connect the camera to the phone, the IP phone will not
transmit the near-site video. For more information on how to connect the camera, refer to Insert
the camera on page 32.
During a call, you can alternate between Speakerphone, Headset, and Handset modes by
pressing the Speakerphone key, the HEADSET key, or by picking up the handset.
The call duration of the call and far-site’s information (name or phone number) are visible on the
touch screen. In the figure below, the video call to “Sandy” has lasted 3 seconds.
Note
The phone will enter the video call full-screen within 5 seconds during a call, you may tap or
blank area of the touch screen to see the soft keys.
Basic Phone Features
265
In the figure below, the audio-only call to “Jerry” (the phone number: 1039) has lasted 7
seconds.
To place a call using the handset:
1. Pick up the handset.
2. Enter the desired number using the keypad or the dial pad on the touch screen.
Tap to see the onscreen keyboard, and then you can enter the number using the
onscreen keyboard.
3. Press , or tap Send.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the Key As Send on page 90.
You can also tap or to search for an entry or contact after picking up the handset, and
then tap the desired entry or contact to place a call.
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, swipe
down from the top of the screen or swipe left/right to go to the second idle screen and then tap
Settings->Status
. The maximum SIP URI or IPv4 address length is 32 characters. For example, SIP
URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
User Guide for SIP-T58V/A Smart Media Phone
266
To place a call using the hands-free (speakerphone) mode:
Do one of the following:
- With the handset on-hook, press or tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send.
- With the handset on-hook, enter the desired number using the keypad or the dial pad on
the touch screen.
Press , or tap Send.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send.
- With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send.
Note
The SIP-T58V/A smart media phone can handle multiple calls at a time. However, only one
active call (the call that has audio associated with it) can be in progress at any time. The
SIP-T58V/A smart media phone can handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T58V/A smart media phone. To place a new call
during an active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send.
- Press or tap the Hold soft key to place the original call on hold.
Tap the NewCall soft key.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press or tap Send.
To permanently use the headset mode, refer to Headset Prior on page 134.
Basic Phone Features
267
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
Using the handset
Using the speakerphone
Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the touch screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free (speakerphone) mode:
Do one of the following:
- Press .
- With the handset on-hook and the headset mode deactivated, tap the Answer soft key.
- With the handset on-hook and the headset mode deactivated, tap the line key.
To answer a call using the headset:
Do one of the following:
- Press .
- With the headset mode activated, tap the Answer soft key.
- With the headset mode activated, tap the line key.
You can reject incoming calls by tapping the Reject soft key to stop the phone from playing ring
tone. You can also activate the Do Not Disturb mode to reject the incoming calls without ringing
on your phone. For more information, refer to Do Not Disturb (DND) on page 287.
You can forward incoming calls to someone else by tapping the FWD soft key. For more
information, refer to Call Forward on page 292.
If multiple accounts are registered on the phone, you can first tap the desired line key on the idle
screen or tap the desired line from the status bar in dialing screen, and then you can use the
selected account to place a call.
User Guide for SIP-T58V/A Smart Media Phone
268
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone. The incoming call
information is displayed on the touch screen.
Do one of the following:
- Tap the Answer soft key.
- Tap the incoming call avatar.
Tap Answer.
The incoming call is answered and the original call is placed on hold.
Audio-only/Video Selection
You can choose to establish an audio-only call or video call while dialing or ringing. This feature
should be pre-configured by your system administrator.
Basic Phone Features
269
Choosing to Place an Audio-only/Video Call
To place an audio-only/video call:
1. Do one of following:
- Enter the desired number using the keypad or the dial pad on the touch screen when
the phone is idle.
- Tap the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad or the dial pad on the touch screen.
2. Tap Video Call/Audio Call to place a video call or audio-only call.
Choosing to Answer the Video Call with Audio-only/Video
When an incoming video call arrives, you can choose to answer the call with audio-only/video.
To answer the video call with audio-only/video:
When an incoming video call arrives, the touch screen will display as below:
User Guide for SIP-T58V/A Smart Media Phone
270
1. Tap the Audio/Video soft key to establish an audio-only call or video call.
Ending Calls
To end a call:
Do one of the following:
- If you are using the handset, tap the EndCall soft key or hang up the handset.
- If you are using the headset, tap the EndCall soft key.
- If you are using the speakerphone, press or tap the EndCall soft key.
Note
Performing Operations during a Call
During the call, you may want to see if there is an event on schedule or check if there is a new
email in the inbox and so on, you can exit the talking screen to access the corresponding
application. And after the operation, you can return to the call conveniently.
The following operations are not allowed during the call:
Record by Recorder application.
Take pictures.
Record videos.
Playback audios/videos.
Launch Camera application.
To end a call placed on hold, you can tap the EndCall soft key to end the call directly, or tap the
Resume soft key to resume the call before ending it.
Basic Phone Features
271
Going to the Idle Screen during a Call
To go to the idle screen during a call:
1. Tap , or to go to the idle screen.
When the phone exits the talking screen, the touch screen will display as below:
By default, a floating video window (far site) will display on the bottom-right of the touch screen.
If you are in a conference video call, the floating video window will display all participants video
image. If you hold the video call or you are in an audio-only call, the floating video window will
not display. You can drag the floating video window to the desired location.
User Guide for SIP-T58V/A Smart Media Phone
272
Returning to the Talking Screen
To return to the talking screen:
- Tap .
- Tap the floating video window.
- Tap Back To Talking on the top of the touch screen.
Changing Video Call Settings
When you update video settings, you can change the way for the current video call to display on
your IP phone.
You can update the following video settings on your phone:
- Stop Transmitting Video during a Call
- Change the Video Layout during Calls
- Preview the Near-Site Video
Stopping Transmitting Video during a Call
You can unplug the camera or swipe down from the top of the screen in the video call screen
and then tap Video to stop your phone from automatically transmitting your video during a
video call. However, you cannot turn off far-site video.
Basic Phone Features
273
If you stop transmitting video, the icon will display on the near-site video, as shown below:
Your camera will not transmit video to your contact and the far site cannot see you.
Stopping transmitting video does not create an audio-only call. Even if you stop transmitting
video, you can see the other party, and the call is still a video call. To place an audio-only call,
contact your system administrator.
Changing the Video Layout during Calls
During video calls, near-site and far-site video images are displayed on the touch screen. You
can change the video layout.
The system supports three video layouts:
One large, other small: One video image displays in a large size, the other video images
along the right side of the screen displays in small sizes.
Full screen: One video image displays in full size, the other video images are hidden.
Same size: All video images display in the same size.
User Guide for SIP-T58V/A Smart Media Phone
274
To swap video during a video call via phone user interface:
1. Tap the near-site (small window) video during a video call.
The near-site video will display in the center of the touch screen, and the far-site video will
display on the top-right of the touch screen.
The following figure shows what the touch screen looks like after you tap the near-site
video:
Basic Phone Features
275
To change the video layout to the same size mode during a video call via phone user
interface:
1. From the video call full-screen, pinch close the large window.
The following figure shows what the touch screen looks like in the same size mode:
You can tap / or the blank area of the touch screen to go back to video call screen (refer
to Video Call Screen Display) or tap the desired image to go back to “one big, other small”
layout.
To change the video layout to the full screen mode during a video call via phone user
interface:
1. From the video call full-screen, do one of the following:
- Tap the large window.
- Pinch open the large window.
User Guide for SIP-T58V/A Smart Media Phone
276
The small window is hidden, and the following figure shows what the touch screen looks
like in full screen mode:
You can tap or to go back to video call screen (refer to Video Call Screen Display) or
tap the video area to go back to “one big, other small” layout.
To change the video layout during a video conference call via phone user interface:
The default screen layout during a video conference call is the same size mode. The following
figure shows what the touch screen looks like during a three-way video conference call:
You can tap / or the blank area of the touch screen to go back to video call screen (refer
to Video Call Screen Display) or tap one of the conference party to go back to the “one big,
other small” layout.
Basic Phone Features
277
The following figure shows what the touch screen looks like in the “one big, other small” layout
during a three-way video conference call:
Previewing the Near-Site Video
If you have connected the camera to the phone, you can preview the video of yourself that you
display during video calls. For more information on how to connect the camera, refer to Insert
the camera on page 32. During previewing, you can also configure camera settings. For more
information, refer to Camera Settings on page 230.
To preview the near-site video when the phone is idle, do one of the following:
- Swipe down from the top of the screen to enter the control center and tap Video.
- Swipe left or right to go to the second idle screen and tap to launch Camera
application.
Redialing Numbers
To redial the last dialed number from your phone:
1. Press twice.
A call to your last dialed number is attempted.
To redial a previously dialed number from your phone:
1. Press when the phone is idle.
2. Tap the desired entry from the placed calls list.
Recent Call In Dialing
To view the placed calls list when the phone is on the dialing interface, you should enable recent
call in dialing in advance.
User Guide for SIP-T58V/A Smart Media Phone
278
To enable recent call in dialing via web user interface:
1. Click on Directory->Setting.
2. Select Enabled from the pull-down list of Recent Call In Dialing.
3. Click Confirm to accept the change.
Note
To view placed calls list when the phone is on the dialing interface:
1. Pick up the handset, press the Speakerphone key or tap the line key.
The touch screen displays the placed calls list.
2. Drag up and down to scroll through placed calls.
Recent call in dialing is configurable via web user interface only.
Basic Phone Features
279
You can also enter a few continuous characters of the contact name or continuous
numbers of the contact number (office, mobile or other number) to search from placed
calls list.
Auto Answer
You can use auto answer to automatically answer an incoming call on a line. Auto answer is
configurable on a per-line basis.
To configure auto answer via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Auto Answer.
3. Tap the On radio box in the desired line.
4. Tap to accept the change or to cancel.
User Guide for SIP-T58V/A Smart Media Phone
280
The icon will display on the status bar.
You can also swipe down from the top of the screen to enter the control center, tap Auto
Answer to enter Auto Answer setting screen, and then enable auto answer feature for the
desired line.
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto Redial
You can enable auto redial to automatically redial a phone number when the called party is busy.
You can also configure the number of auto redial attempts and the time to wait between redial
attempts.
To configure auto redial via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Auto Redial.
3. Tap the On radio box in the Auto Redial field.
4. Enter the desired time (in seconds) in the Redial Interval field.
The default value is “10”.
5. Enter the desired number of redial attempts in the Redial Times field.
Auto answer is only applicable when there is no other call in progress on the phone.
Basic Phone Features
281
The default value is “10”.
6. Tap to accept the change or to cancel.
Auto redial is configurable via web user interface at the path Features->General Information.
To use auto redial:
When the called party is busy, the touch screen prompts the following:
1. Tap OK to activate auto redial.
User Guide for SIP-T58V/A Smart Media Phone
282
The touch screen prompts the following:
2. Wait for the designated period of time or tap OK to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
Call Completion
You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To enable call completion via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Call Completion.
3. Tap the On radio box in the Call Completion field.
4. Tap to accept the change or to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
Basic Phone Features
283
To use call completion:
When the called party is busy, the following prompt will appear on the touch screen of the
phone:
1. Tap OK, the phone will then return to the idle screen and call completion will be activated.
When the called party becomes idle, the touch screen prompts the following:
1. Tap OK to redial the number.
Note
Recall
You can tap a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
Call completion is not available on all servers. For more information, contact your system
administrator.
User Guide for SIP-T58V/A Smart Media Phone
284
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap ReCall in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Tap to accept the change or to cancel.
You can also tap on the idle screen to configure a recall key. For more information, refer to
DSS Keys on page 151.
Recall key is configurable via web user interface at the path DSSKey->Line key.
Call Mute/Un-mute
You can mute the microphone of the active audio device during an active call so that the other
party cannot hear you. Call mute applies to all modes (Handset, Headset and Speakerphone).
Basic Phone Features
285
Keep Mute
Normally, the mute feature is deactivated when the active call ends. Keep mute feature enables
you to make the mute state of your phone persist across calls. This feature should be
pre-configured by your system administrator. When keep mute is enabled and you press the
MUTE key, the phone stays in the mute state until you un-mute the microphone or until the
phone restarts. It helps prevent the other party from hearing the noise coming from your room
when auto answer is enabled on your phone. When you mute the phone in an idle state or any
other states, the mute key LED illuminates solid red and the icon appears on the status bar.
To mute a call:
1. Press during an active call.
The mute key LED illuminates solid red.
The following shows an audio-only call has been muted:
User Guide for SIP-T58V/A Smart Media Phone
286
The following shows a video call has been muted:
To un-mute a call:
1. Press again to un-mute the call.
The mute key LED goes out.
Call Hold/Resume
You can place an active call on hold. Only one active call can be in progress on the phone at any
time. Other calls can be made and received while placing the original call on hold. When you
place a call on hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1. Press or tap the Hold soft key during a call.
The following shows an audio-only call has been held:
Basic Phone Features
287
The following shows a video call has been held:
The phone will beep softly every 30 seconds to remind you that you still have a call on hold.
To resume a held call:
1. Press or tap the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Tap the desired call, and then tap the Resume soft key to retrieve it.
- Tap the desired call, and then tap the corresponding line key to retrieve it.
Do Not Disturb (DND)
You can use DND to reject incoming calls automatically on the phone. The prompt message "n
New Missed Call(s)" ("n" indicates the number of missed calls) will appear on the touch screen,
and callers will receive a busy message. All calls you receive while DND is enabled are logged to
your missed calls list.
Note
You can enable/disable DND for the phone system, or you can customize DND for each or all
accounts. Two DND modes:
Phone (default): DND is effective for the phone system.
Custom: DND can be configured for each or all accounts.
You can receive incoming calls from authorized numbers when DND is enabled.
The prompt message will display only if Missed Call Log for the line is enabled. Missed call log is
configurable via web user interface at the path Account->Basic->Missed Call Log.
Do not disturb is local to the phone, and may be overridden by the server settings. For more
information, contact your system administrator.
User Guide for SIP-T58V/A Smart Media Phone
288
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.
2. In the DND block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
To enable DND in phone mode:
1. Swipe down from the top of the screen to enter the control center and toggle DND on.
The icon on the status bar indicates that DND is enabled.
DND mode is configurable via web user interface only.
Basic Phone Features
289
Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n" indicates the
number of missed calls. e.g., 1 New Missed Call(s)) will appear on the touch screen.
Note
To enable DND in custom mode for a specific account:
1. Swipe down from the top of the screen to enter the control center and then tap DND.
The touch screen displays a list of accounts registered on the phone.
2. Tap the desired account.
3. Tap the On radio box in the DND Status field.
When DND and busy forward are enabled in phone mode, all incoming calls will be forwarded to
the configured destination number. For more information on busy forward, refer to Call Forward
on page 292.
User Guide for SIP-T58V/A Smart Media Phone
290
4. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code
field.
5. Tap to accept the change.
If you enable DND for the default account, the associated line icon will change to , and the
icon will appear on the status bar.
Basic Phone Features
291
If you enable DND for the non-default account, only the associated line icon will change to ,
the icon will not appear on the status bar.
If you enable DND for all accounts, all line icons will change to and the icon will appear
on the status bar.
Note
To configure the DND authorized numbers via web user interface:
1. Click on Features->Forward & DND.
2. Select Enabled from the pull-down list of DND Emergency.
3. Enter the numbers in the DND Authorized Numbers field.
When DND and busy forward are enabled for a specific account, incoming calls on the specific
account will be forwarded to the configured destination number. For more information on busy
forward, refer to Call Forward on page 292.
User Guide for SIP-T58V/A Smart Media Phone
292
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When DND is enabled on the phone, the phone can still receive incoming calls from the
numbers specified in the DND Authorized Numbers field.
Note
To disable DND in phone mode:
1. Swipe down from the top of the screen to enter the control center and then tap DND.
To disable DND in custom mode:
1. Swipe down from the top of the screen to enter the control center and then tap DND.
2. Tap the desired account.
3. Tap the Off radio box of the DND Status field.
4. Tap to accept the change.
Call Forward
You can configure your phone to forward incoming calls to another party (static forwarding) or
forward calls while your phone is ringing (dynamic forwarding).
You can forward an incoming call to an international telephone number. This feature is enabled
by default. Incoming calls from some authorized numbers not to be forwarded when the call
forward feature is enabled. The incoming call will not be logged in the Forwarded Calls list. This
DND authorized number is configurable via web user interface only.
When the phone misses a call, a prompt window will pop up by default. If you want to disable the
feature, contact your system administrator for more information.
Basic Phone Features
293
feature is disabled by default.
Note
Static Forwarding
Three types of static forwarding:
Always Forward: Incoming calls are immediately forwarded.
Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
You can enable/disable call forward for the phone system, or you can customize call forward for
each or all accounts. Two call forward modes:
Phone (default): Call forward is effective for the phone system.
Custom: Call forward can be configured for each or all accounts.
To configure the call forward mode via web user interface:
1. Click on Features->Forward & DND.
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
Call forward mode is configurable via web user interface only.
Call forward is local to the phone, and may be overridden by the server settings. For more
information, contact your system administrator.
If DND feature is enabled, the incoming calls will not be forwarded even if you configure no
answer forward feature.
When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.
User Guide for SIP-T58V/A Smart Media Phone
294
To enable call forward in phone mode:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Call Forward.
3. Tap the desired forwarding type.
4. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box in the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.
3) (Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.
b) If you tap Busy Forward:
1) Tap the On radio box in the Busy Forward field.
2) Enter the destination number you want to forward incoming calls to when the
phone is busy in the Forward To field.
Basic Phone Features
295
3) (Optional.) Enter the busy forward on code or off code respectively in the On
Code or Off Code field.
c) If you tap No Answer Forward:
1) Tap the On radio box in the No Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming calls to
in the Forward To field.
3) Tap the After Ring Time field.
4) Tap the desired ring time to wait before forwarding from the pull-down list.
The default ring time is 12 seconds.
5) (Optional.) Enter the no answer forward on code or off code respectively in the
On Code or Off Code field.
5. Tap to accept the change or to cancel.
The icon on the status bar indicates that the call forward is enabled.
You can also swipe down from the top of the screen to enter the control center, tap
Forward to enter the desired Call Forward setting screen according to the current forward
type. If you have not configured the call forward type, tapping Forward will turn to the
Always Forward setting screen.
User Guide for SIP-T58V/A Smart Media Phone
296
To enable call forward in custom mode:
1. Do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle
screen.
Tap Settings->Features->Call Forward.
- Press when the phone is idle.
- Swipe down from the top of the screen to enter the control center and then tap
Forward.
2. Tap the desired account.
3. Tap the desired forwarding type.
4. Depending on your selection:
a) If you tap Always Forward:
1) Tap the On radio box in the Always Forward field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.
Basic Phone Features
297
3) (Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.
You can also enable always forward for all accounts. Do the following:
1) Tap and then tap All Lines.
The touch screen prompts “Copy to all lines?”.
User Guide for SIP-T58V/A Smart Media Phone
298
2) Tap OK to accept the change or Cancel to cancel.
b) If you select Busy Forward:
1) Tap the On radio box in the Busy Forward field.
2) Enter the destination number you want to forward incoming calls to when the
phone is busy in the Forward To field.
3) (Optional.) Enter the busy forward on code or off code respectively in the On
Code or Off Code field.
You can also enable busy forward for all accounts. Do the following:
1) Tap and then tap All Lines.
Basic Phone Features
299
The touch screen prompts “Copy to all lines?”.
2) Tap OK to accept the change or Cancel to cancel.
c) If you select No Answer Forward:
1) Tap the On radio box in the No Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming calls to
in the Forward To field.
3) Tap the After Ring Time field.
4) Tap the desired ring time to wait before forwarding from the pull-down list.
The default ring time is 12 seconds.
5) (Optional.) Enter the no answer forward on code or off code respectively in the
On Code or Off Code field.
User Guide for SIP-T58V/A Smart Media Phone
300
You can also enable no answer forward for all accounts. Do the following:
1) Tap and then tap All Lines.
The touch screen prompts “Copy to all lines?”.
2) Tap OK to accept the change or Cancel to cancel.
5. Tap and then tap Save to accept the change.
Basic Phone Features
301
If you enable call forward for the default account, the associated line icon will change to ,
and the icon will appear on the status bar.
If you enable call forward for the non-default account, only the associated line icon will change
to , the icon will not appear on the status bar.
If you enable call forward for all accounts, all line icons will change to , and the icon will
appear on the status bar.
User Guide for SIP-T58V/A Smart Media Phone
302
If the forward on code or off code is configured, the IP phone sends the corresponding code to
the server when a certain action takes place. For example, if you set the Always Forward on code
to be *71 (may vary on different servers), and the target number to be 1234. When you enable
Always Forward on the IP phone, the IP phone sends *711234 to the server, and then the server
will enable Always Forward feature on the server side, hence being able to get the right status of
the extension.
Call forward is configurable via web user interface at the path Features->Forward & DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward & DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is enabled on the phone, the phone cannot forward incoming calls from the
numbers specified in the Forward Authorized Numbers field.
Note
To disable call forward in phone mode:
Do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
Tap Settings->Features->Call Forward.
Tap the desired forwarding type.
You can also enter the SIP URI or IP address in the Forward To field. For more information on
using the SIP URI or IP address, refer to Placing Calls on page 264.
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different among servers. For more information, contact your system
administrator.
Forward authorized number is configurable via web user interface only.
Basic Phone Features
303
Tap the Off radio box.
Tap to accept the change.
- Press when the phone is idle.
- Swipe down from the top of the screen to enter the control center, and then tap Forward.
To disable call forward in custom mode for a specific account:
1. Do one of the following:
- Swipe down from the top of the screen or swipe left/right to go to the second idle
screen.
Tap Settings->Features->Call Forward.
- Press when the phone is idle.
- Swipe down from the top of the screen to enter the control center and then tap
Forward.
The touch screen displays a list of accounts registered on the phone.
2. Tap the desired account.
3. Tap the desired forwarding type.
4. Tap the Off radio box.
5. Tap and then tap Save to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, tap the FWD soft key.
2. Enter the number you want to forward the incoming call to.
3. Press or tap FWD.
The touch screen prompts a call forward message.
User Guide for SIP-T58V/A Smart Media Phone
304
Call Transfer
You can transfer a call to another party in one of three ways:
Blind Transfer: Transfer a call directly to another party without consulting.
Semi-Attended Transfer: Transfer a call when the target phone is ringing.
Attended Transfer: Transfer a call with prior consulting.
Blind Transfer
Before performing a blind transfer (except you use dial number method), make sure that the
transfer mode via Dsskey is configured as Blind Transfer. For more information on how to
configure it, refer to Configuring Transfer Mode via DssKey on page 330.
To perform a blind transfer:
1. Press or tap the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press to complete the transfer.
- Enter the number you want to transfer the call to.
Tap Transfer.
Basic Phone Features
305
The phone will prompt a dialog box as the following picture shows:
Tap Transfer to complete the transfer. (The call will automatically dial out in about 5
seconds if you do not tap Transfer.)
- Tap , and then tap Local Directory. Search for the contact and tap the desired
contact to complete the transfer.
- Tap , and then tap Remote Phone Book. Search for the contact and tap the
desired contact to complete the transfer. (Remote phone book should be configured in
advance, refer to Remote Phone Book on page 121 for more information.)
- Tap , and then tap the desired list. Tap the desired entry to complete the transfer.
The call is then connected to the number to which you are transferring.
To perform a blind transfer conveniently, do one of the following:
- When there is an active call for the account selected from the Account ID field on the
speed dial or BLF key. Drag the far-site window to that speed dial or BLF key.
Then the call is connected to the number specified in the Value field of the speed dial or
BLF key. For more information on how to configure a speed dial or BLF key, refer to DSS
Keys on page 151.
User Guide for SIP-T58V/A Smart Media Phone
306
- Make sure you have an active call and one or more calls on hold, drag one far-site window
to another far-site window.
The touch screen prompts the following:
Tap Transfer.
Then the active call is connected to the number of the held party.
Semi-Attended Transfer
Before performing a semi-attended transfer (except you use dial number method), make sure
that the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode via DssKey on page 330.
To perform a semi-attended transfer:
1. Press or tap the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press to dial out.
Basic Phone Features
307
- Enter the number you want to transfer the call to.
Tap Transfer. The phone will prompt a dialog box. Tap Send to dial out. (The call will
automatically dial out in about 5 seconds if you do not tap Send.)
- Tap , and then tap Local Directory. Search for the contact and tap the desired
contact to dial out.
- Tap , and then tap Remote Phone Book. Search for the contact and tap the
desired contact to dial out. (Remote phone book should be configured in advance,
refer to Remote Phone Book on page 121 for more information.)
- Tap , and then tap the desired list. Tap the desired entry to dial out.
3. Press or tap the Transfer soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.
Attended Transfer
Before performing an attended transfer (except you use dial number method), make sure that
the transfer mode via Dsskey is configured as New Call or Attended Transfer. For more
information on how to configure it, refer to Configuring Transfer Mode via DssKey on page 330.
To perform an attended transfer:
1. Press or tap the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
Press to dial out.
- Enter the number you want to transfer the call to.
Tap Transfer. The phone will prompt a dialog box. Tap Send to dial out. (The call will
automatically dial out in about 5 seconds if you do not tap Send.)
- Tap , and then tap Local Directory. Search for the contact and tap the desired
User Guide for SIP-T58V/A Smart Media Phone
308
contact to dial out.
- Tap , and then tap Remote Phone Book. Search for the contact and tap the
desired contact to dial out. (Remote phone book should be configured in advance,
refer to Remote Phone Book on page 121 for more information.)
- Tap , and then tap the desired list. Tap the desired entry to dial out.
3. After the party answers the call, press or tap Transfer soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
Call Waiting
You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call when there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.
To configure call waiting via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Call Waiting.
3. Tap the On radio box in the Call Waiting field.
4. Tap the On radio box in the Play Tone field.
5. (Optional.) Enter the call waiting on code or off code respectively in the On Code or Off
Code field.
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. They may vary on different servers.
6. Tap to accept the change or to cancel.
Basic Phone Features
309
Call waiting is configurable via web user interface at the path Features->General Information.
Conference
You can use the SIP-T58V/A smart media phone to create a conference using the phone’s local
conference and network conference. During a conference, you can manage each participant.
You can mute, hold and remove individual participants in the video call screen. For more
information on the video call screen, refer to Video Call Screen Display on page 47.
Note
Local Conference
You can create up to three-way video conference call and five-way audio-only and video mixed
conference. The audio-only and video mixed conference supports five parties participated
(including yourself) at the same time including a maximum of three-way video calls.
The following figure shows what the touch screen looks like in a mixed conference call with
three-way video calls and two-way audio-only calls:
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, tap the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party, and then press or tap Conference.
Network conference is not available on all servers. For more information, contact your system
administrator.
User Guide for SIP-T58V/A Smart Media Phone
310
4. When the second party answers the call, tap the Conference soft key on the second party
call screen to join all parties in the conference.
5. Repeat steps 2 to 4 until you have added all intended parties.
Note
To join calls in a conference:
1. Make sure you have an active call and one or more calls are on hold (either on the same
line key or a different line key).
2. Do one of the following:
- Drag one far-site window to another far-site window.
The phone will enter the video call full-screen within 5 seconds during a call, you may tap or
blank area of the touch screen to see the soft keys.
Basic Phone Features
311
The touch screen prompts the following:
Tap Conference.
- Tap the desired call for conference and ensure that the call is active.
Tap the Conference soft key.
Tap the Hold call to join the calls in the conference.
User Guide for SIP-T58V/A Smart Media Phone
312
3. Repeat the step 2 to join more calls in the conference.
During the conference call, you can do the following:
Press or tap the Hold soft key to place the conference call on hold.
Tap the Conference soft key to place a new call.
Tap the Split soft key to split the conference call into individual calls on hold.
Press to mute the conference call, all other participants can hear each other, but they
cannot hear you.
Tap the EndCall soft key to drop the conference call.
Long tap the desired party (if the far site only supports audio-only call, you can just tap it),
the phone will prompt a dialog box as the following picture shows:
You can do the following:
- Tap Far Mute to mute the party. The muted party can hear everyone, but no one can
hear the muted party.
- Tap Remove to remove the party.
- Tap Cancel or to close the dialog box.
Network Conference
You can use network conference feature on the SIP-T58V/A smart media phone to conduct an
audio-only/video/audio-only and video mixed conference with multiple participants.
This feature allows you to perform the following:
Join calls together in a conference call.
Invite other party into an active conference call.
Basic Phone Features
313
To use this feature, contact your system administrator for the network conference URI in
advance.
Note
To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Network Conference from the pull-down list of Conference Type.
4. Enter the conference URI (e.g., conference@example.com) in the Conference URI field.
5. Click Confirm to accept the change.
Note
To set up a network conference call:
1. Place a call to the first party.
2. Tap the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press or tap Conference.
4. When the second party answers the call, tap the Conference soft key to add the second
party to the conference.
5. Tap the Conference soft key to place a new call.
The conference call is placed on hold.
Network conference is configurable via web user interface only.
Network conference is not available on all servers. Contact your system administrator for more
information.
User Guide for SIP-T58V/A Smart Media Phone
314
6. Enter the number of the new party and then press or tap Conference.
7. When the new party answers the call, tap the Conference soft key to add the new party to
the conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different from
introduced above. Contact your system administrator for more information.
Call Park/Retrieve
You can use call park feature to place a call on hold, and then retrieve the call from another
phone in the system (for example, a phone in another office or conference room). You can park
an active call by tapping the Park soft key or call park key (if configured) on the phone. If the call
is parked successfully, there is a voice prompt confirming that the call was parked. You can
retrieve the parked call by tapping Retrieve Park or the retrieve park key (if configured). But if
the parked call is not retrieved within a period of time defined by the system, the phone
performing call park will receive the call back.
Note
The IP phone supports call park feature under the following modes:
FAC mode: park the call to the local extension or a desired extension through dialing the
park code.
Transfer mode: park the call to shared parking lot through performing a blind transfer to
a call park number (call park code).
FAC Mode
To configure call park feature in FAC mode:
1. Click Features->Pick up & Park.
2. Select FAC from the Call Park Mode field.
3. Select Enabled from the Call Park field.
If Enabled is selected, the Park soft key will display on the touch screen during a call, and
the Retrieve Park will display on the dialing screen.
4. Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. Enter the park retrieve code in the Park Retrieve Code field.
Call park is not available on all servers. Contact your system administrator for more information.
Basic Phone Features
315
It is configured for Retrieve Park. This park retrieve code will also apply to the retrieve park
key.
6. Click Confirm.
Note
To park a call in FAC mode:
1. Swipe the soft key area left and then tap the Park soft key during a call.
The phone will dial the configured call park code shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension, press the # key.
If the call is parked successfully, you will hear a voice prompt confirming that the call is
parked.
If the Park soft key or Retrieve Park doesn’t appear on the touch screen, please select
Disabled from the pull-down list of Custom Softkey via web user interface at path
Settings->Softkey Layout.
User Guide for SIP-T58V/A Smart Media Phone
316
b) If you want to park the call against desired extension.
1) Enter the extension (for example, 4606) where you want to park the call.
2) Press the # key.
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
From the Calls screen, you can also use a Call Park key (refer to Call Park) to park the call to
desired destination directly.
Note
To retrieve a parked call in FAC mode:
1. Pick up the handset, press the Speakerphone key or tap the line key.
Retrieve Park appears on the touch screen.
2. Tap Retrieve Park.
You can also tap the desired BLF or BLF List key to park a call directly. For more information,
refer to Parking a Call/Retrieving a Parked Call to the Monitored User.
Basic Phone Features
317
The phone will dial the configured park retrieve code and the Retrieve screen is shown as
below:
3. Follow the voice prompt, do one of the following:
- Press the # key on the phone where the call is parked.
- Enter the desired extension followed by # (for example, 4606#) on any phone.
From the Idle screen, you can also use a Park Retrieve key (refer to Retrieve Park) to retrieve the
parked call from desired destination directly.
Note
Transfer Mode
To configure call park feature in Transfer mode:
1. Click Features->Pick up & Park.
2. Select Transfer from the Call Park Mode field.
3. Select Enabled from the Call Park field.
If Enabled is selected, the Park soft key will display on the touch screen during a call, and
Retrieve Park will display on the dialing screen.
4. Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. Enter the park retrieve code in the Park Retrieve Code field.
You can also tap the desired BLF or BLF List key to retrieve a parked call directly. For more
information, refer to Parking a Call/Retrieving a Parked Call to the Monitored User.
User Guide for SIP-T58V/A Smart Media Phone
318
It is configured for Retrieve Park. This park retrieve code will also apply to the retrieve
park key.
6. Click Confirm.
Note
To park a call in Transfer mode:
1. Swipe the soft key area left and then tap the Park soft key during a call.
The call will be directly transferred to the shared parking lot.
From the Calls screen, you can also use a Call Park key (refer to Call Park) to park the call to
shared parking lot directly during a call.
Note
To retrieve a parked call in Transfer mode:
1. Pick up the handset, press the Speakerphone key or tap the line key.
2. Tap Retrieve Park.
The phone will retrieve the parked call from the shared parking lot.
From the Idle screen, you can also tap a Park Retrieve key (refer to Retrieve Park) to retrieve the
parked call from shared parking lot directly when the phone is idle.
If the Park soft key or Retrieve Park doesn’t appear on the LCD screen, please select Disabled
from the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
For some servers, the system will return a specific retrieve park number (park retrieve code)
from which the call can be retrieved after parking successfully.
Basic Phone Features
319
Call Pickup
You can use call pickup to answer someone else’s incoming call on your phone. The SIP-T58V/A
smart media phone supports directed call pickup and group call pickup. Directed call pickup is
used for picking up a call that is ringing at a target phone number. Group call pickup is used for
picking up a call that is ringing at any phone number in a certain group. The pickup group
should be predefined, contact your system administrator for more information.
You can pick up an incoming call by tapping DPickup/GPickup on the dialing screen. To use
call pickup, you need to configure the call pickup code beforehand on a global or per-line basis
via web user interface. The call pickup code configured on a per-line basis takes precedence
over that configured on a global basis.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a global
basis via web user interface:
1. Click on Features->Pick up & Park.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
If there are many incoming calls at the same time, tapping GPickup on the phone will pick up the
call that rings first.
User Guide for SIP-T58V/A Smart Media Phone
320
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To pick up a call directly:
1. Pick up the handset, press the Speakerphone key or tap the line key.
DPickup appears on the touch screen.
2. Tap DPickup on your phone when the target phone receives an incoming call.
3. Enter the phone number which is receiving an incoming call.
4. Tap DPickup again.
The call is answered on your phone.
You can also configure a line key as a direct pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the direct pickup key directly. For
more information, refer to Line Keys on page 151.
Basic Phone Features
321
Group Call Pickup
To enable group call pickup and configure the group call pickup code on a global basis via
web user interface:
1. Click on Features->Pick up & Park.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Enter the group call pickup code in the Group Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the group call pickup code in the Group Call Pickup Code field.
User Guide for SIP-T58V/A Smart Media Phone
322
4. Click Confirm to accept the change.
To pick up a call in the group:
1. Pick up the handset, press the Speakerphone key or tap the line key.
GPickup appears on the touch screen.
2. Tap GPickup on your phone when a phone in the group receives an incoming call.
The call is answered on your phone.
You can also configure a line key as a group pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the group pickup key directly.
Note
Anonymous Call
You can use anonymous call to block your identity and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some of the
services, but don’t want to be harassed. Anonymous call is configurable on a per-line basis. You
can also configure the phone to send anonymous call on/off code to the server to
activate/deactivate anonymous call on the server side.
Note
To configure anonymous call via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Anonymous.
3. Tap the desired line.
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
The directed call pickup code and group call pickup code are predefined on the system server.
Contact your system administrator for more information.
Basic Phone Features
323
4. Tap the On radio box in the Local Anonymous field.
5. (Optional.) Tap the On Code or Off Code radio box in the Send Anony Code field.
6. (Optional.) Enter the anonymous call on code and off code respectively in the On Code
and Off Code field beneath the Send Anony Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
7. Tap to accept the change or to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
1. Using the specific line on the phone to place a call to phone B.
The touch screen of phone B prompts an incoming call from anonymous.
Anonymous Call Rejection
You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who deliberately
User Guide for SIP-T58V/A Smart Media Phone
324
block their identities and numbers from being displayed. Anonymous call rejection is
configurable on a per-line basis. You can also configure the phone to send anonymous call
rejection on/off code to the server to activate/deactivate anonymous call rejection on the server
side.
To configure anonymous call rejection via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Anonymous.
3. Tap the desired line.
4. Tap the On radio box in the Anonymous Rejection field.
5. (Optional.) Tap the On Code or Off Code radio box in the Send Rejection Code field.
6. (Optional.) Enter the anonymous call rejection on code and off code respectively in the On
Code and Off Code field beneath the Send Rejection Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call rejection feature on the phone.
7. Tap to accept the change or to cancel.
Anonymous call rejection is configurable via web user interface at the path Account->Basic.
Basic Phone Features
325
If phone B has anonymous call feature enabled and places a call to your phone, the call will be
rejected, and the touch screen of the phone B will display the following:
User Guide for SIP-T58V/A Smart Media Phone
326
Advanced Phone Features
327
Advanced Phone Features
This chapter provides operating instructions for the advanced features of the SIP-T58V/A smart
media phone. Topics include:
Busy Lamp Field (BLF)
BLF List
Screenshot
Call Recording
Hot Desking
Intercom
Multicast Paging
Music on Hold
Automatic Call Distribution (ACD)
Shared Call Appearance (SCA)
Message
If you require additional information or assistance with your new phone, contact your system
administrator.
Busy Lamp Field (BLF)
You can use BLF to monitor a specific line for status changes on the phone. For example, you
can configure a BLF key on the phone to monitor the status of a friend’s line (busy or idle). The
BLF key icon illuminates solid red when the friend’s line is in use. For more information, contact
your system administrator.
Configuring the BLF Feature on the Phone
You need to configure the IP phone to perform BLF monitoring. IP phones being monitored do
not require any configuration.
Configuring a BLF Key
To configure a BLF key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
User Guide for SIP-T58V/A Smart Media Phone
328
4. Tap the Type field.
5. Tap BLF in the pop-up dialog box.
6. Tap the Account ID field.
7. Tap the desired line in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Enter the phone number or extension you want to monitor in the Value field.
10. (Optional.) Enter the directed call pickup code in the Extension field.
If it is configured, when the monitored user receives an incoming call, the supervisor can
tap the BLF key to pick up the call directly.
11. Tap to accept the change or to cancel.
BLF key is configurable via web user interface at the path DSSKey->Line key.
Configuring Visual and Audio Alert for BLF pickup
You can enable audio alert feature for BLF pickup on the phone. This allows the monitoring
phone to play a warning tone when the monitored line receives an incoming call. You can also
enable visual alert feature for BLF pickup on the phone. This allows the touch screen of the
monitoring phone to display the caller ID when the monitored line receives an incoming call.
To enable visual and audio alert features via web user interface:
1. Click on Features->Pick up & Park.
2. Select Enabled from the pull-down list of Visual Alert for BLF Pickup.
Advanced Phone Features
329
3. Select Enabled from the pull-down list of Audio Alert for BLF Pickup.
4. Click Confirm to accept the change.
Note
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a warning tone (if enabled).
The BLF key icon flashes red.
The caller ID appears on the touch screen (if enabled).
In the following figure, the touch screen shows an incoming call from 1024 on the monitored
line.
You can do the following actions:
- Tap the DPickup soft key to pick up the call.
- Tap the Send soft key to dial out the monitored phone number.
- Tap the NewCall soft key to place a new call.
- Tap the Cancel soft key to exit the screen.
Visual and audio alert features are configurable via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
330
Configuring Transfer Mode via DssKey
When there is an active call on the IP phone, you can handle the active call differently
depending on the configuration of the transfer mode via Dsskey with the BLF key.
To configure the transfer mode via Dsskey via web user interface:
1. Click on Features->Transfer.
2. Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
If you select Blind Transfer, tap the BLF key to blind transfer the call to the monitored
user.
If you select Attended Transfer, tap the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.
If you select New Call, tap the BLF key to place a new call to the monitored user.
The original call is placed on hold.
3. Click Confirm to accept the change.
Note
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advance, you can pick up the monitored user’s
incoming call by tapping the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to Configuring a BLF Key on page 327. You
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
If you enable visual alert feature, you can also pick up the monitored user’s incoming call by
tapping the DPickup soft key. To use the DPickup soft key to pick up the call, the call pickup
code can only be configured on a global or per-line basis via web user interface.
Note
The pickup code is used in the following order of preference: Extension (DSSKey->Line
Key)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Features->Pick up & Park). If pickup code is not configured, tapping the BLF key/DPickup soft
key will directly call the monitored user when he/she receives an incoming call.
Transfer Mode via DssKey is also applicable to BLF list feature.
Advanced Phone Features
331
To configure directed call pickup feature on a global basis via web user interface:
1. Click on Features->Pick up & Park.
2. Enter the desired pickup code in the Directed Call Pickup Code field.
3. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the desired pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
Using BLF Feature on the Phone
You can use the BLF key in the following ways:
Place a call to the monitored user.
User Guide for SIP-T58V/A Smart Media Phone
332
Transfer a call to the monitored user.
Pick up an incoming call of the monitored user.
Placing a Call to the Monitor User
You can tap a BLF key to dial out the monitored phone number when the monitored line is idle.
To place a call to the monitored user when the IP phone is idle:
1. Tap the BLF key.
The IP phone dials out the phone number of the monitored user.
Transferring a Call to the Monitored User
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by tapping the BLF key. The phone handles the active call differently depending
on the configuration of the transfer mode via Dsskey with the BLF key (refer to Configuring
Transfer Mode via DssKey). The transfer mode via Dsskey has the following modes:
Blind Transfer
Attended Transfer
New Call
To perform a blind transfer:
When the transfer mode via Dsskey is set to Blind Transfer and there is already an active call on
the IP phone, you can do the following:
1. Tap the BLF key of the monitored user which you want to transfer this call to.
Then the active call is connected to the number of the monitored user.
To perform a semi-attended transfer:
When the transfer mode via Dsskey is set to Attended Transfer and there is already an active
call on the IP phone, you can do the following:
1. Tap the BLF key of the monitored user which you want to transfer this call to. The phone
will dial the number of the monitored user.
2. Tap the BLF key of the monitored user again or the Transfer soft key to complete the
transfer when receiving ringback.
To perform an attended transfer:
When the transfer mode via Dsskey is set to Attended Transfer and there is already an active
call on the IP phone, you can do the following:
1. Tap the BLF key of the monitored user which you want to transfer this call to. The phone
will dial the number of the monitored user.
2. Tap the BLF key of the monitored user again or the Transfer soft key to complete the
transfer after the monitored user answers the call.
Advanced Phone Features
333
To perform a new call:
When the transfer mode via Dsskey is set to New Call and there is already an active call on the
IP phone, you can do the following:
1. Tap the BLF key of the monitored user you want to call.
The phone will dial the number of the monitored user. The original call is placed on hold.
Picking up an Incoming Call of the Monitored User
When the monitored user receives an incoming call, the BLF key icon of the monitored user will
become and flashing. You can use the BLF key to pick up an incoming call of the monitored
user. If you enable visual alert feature on the phone, you can pick up the incoming call using the
DPickup soft key. Before picking up an incoming call, ensure that the directed call pickup code
has been configured in advance.
To pick up an incoming call using the BLF key or the DPickup soft key:
1. Tap the BLF key or the DPickup soft key.
The incoming call of the monitored user is answered on the IP phone.
Note
Parking a Call/Retrieving a Parked Call to the Monitored User
You can use the BLF key to park a call or retrieve a parked call directly in FAC mode. Make sure
that the call park feature is configured in advance (refer to FAC Mode).
To park a call in FAC mode:
1. During a call, tap the Park soft key.
2. Tap the desired BLF key to park the call to the monitored user.
To retrieve a parked call in FAC mode:
1. Tap Retrieve Park on the dialing screen.
2. Tap the desired BLF key to retrieve a call that is parked to the monitored user.
BLF List
You can use the BLF List feature to monitor a list of users defined by your system administrator.
For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,
BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IP
phone can present the status of user1 and user2. The key icons illuminate flashing or solid
depending on the status of those users. For more BLF List key icon, refer to Line Key Icons on
page 17.
If the directed call pickup code is not configured, the phone will place a call to the monitored
user instead of picking up an incoming call of the monitored user when you tap the BLF key or
the DPickup soft key.
User Guide for SIP-T58V/A Smart Media Phone
334
You can use the BLF List keys in the following ways:
When the monitored user is idle, tap the BLF list key to dial out the phone number.
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by tapping the BLF List key. The phone handles the active call differently
depending on the configuration of the transfer mode via Dsskey with the BLF list key. For
more information on the transfer mode via Dsskey, refer to Configuring Transfer Mode via
DssKey on page 330.
When the monitored user receives an incoming call, tap the BLF list key to pick up the call
directly. Before picking up an incoming call, ensure that the BLF List Pickup Code has been
configured in advance. If the code is not configured, the phone will place a call to the
monitored user instead of picking up the incoming call of the monitored user when you
tap the BLF List key.
When there is a conversation on the monitored user, tap the BLF list key to barge in and
set up a conference call. Before barging in an active call, ensure that the BLF List Barge In
Code has been configured in advance. If the code is not configured, the phone will place a
call to the monitored user instead of barging in an active call of the monitored user when
you tap the BLF List key.
When a call is being parked against the monitored phone, tap the BLF List key to retrieve
the parked call from the monitored user. Before retrieving the parked call, ensure that the
BLF List Retrieve Call Parked Code has been configured in advance. If the code is not
configured, the phone will place a call to the monitored user instead of retrieving the
parked call when you tap the BLF List key.
To configure BLF List settings via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the BLF List URI in the BLF List URI field.
4. (Optional.) Enter the directed pickup code in the BLF List Pickup Code field.
5. (Optional.) Enter the barge-in code in the BLF List Barge In Code field.
Advanced Phone Features
335
6. (Optional.) Enter the call park retrieve code in the BLF List Retrieve Call Parked Code
field.
7. Click Confirm to accept the change.
Note
According to the response message from the server, the IP phone will automatically configure
the BLF List keys beginning from the first unused DSS key (The default order of BLF list keys
assigned automatically is Line Key->Ext Key). Once any DSS key is seized, the IP phone will skip
to configure the next DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the monitored
user receives an incoming call. For more information, refer to Configuring Visual and Audio Alert
for BLF pickup on page 328.
Note
Screenshot
You can tap Screenshot on the control center or press during the call to capture a
screenshot. The screenshots are saved in the internal SD card with the name consisting of a
prefix “Screenshot” and date & time stamp, for example, Screenshot_2016-03-02-14-00-26 was
The pickup code is used in the following order of preference: BLF List Pickup Code
(Account->Advanced)>Directed Call Pickup Code (Account->Advanced)>Directed Call Pickup
Code (Features->Pick up & Park). If all of them are not configured, tapping the BLF List key will
directly call the monitored user when he/she receives an incoming call. For more information
about pickup code, refer to Call Pickup on page 319.
For more information on BLF List URI/BLF List Pickup Code/BLF List Barge In Code/BLF List
Retrieve Call Parked Code, contact your system administrator.
User Guide for SIP-T58V/A Smart Media Phone
336
created on March 2, 2016, at 14:00:26. You can view the screenshots by FileManager or Gallery
application. For more information, refer to FileManager on page 195 and Gallery on page 208.
Note
To capture a screenshot:
1. Swipe down from the top of the screen to enter the control center.
2. Tap Screenshot.
If the screenshot is successfully saved, the notification center will display a notification
“Screenshot captured.”.
You can tap the notification to view the latest screenshot.
If there is no enough space in internal SD card, you cannot save the screenshot, and the
notification center will display a notification “Couldn’t capture screenshot.”.
The screenshots are saved in *.webp format. You can view the screenshots on either the phone
itself or on a computer using an application capable of viewing *.webp files.
Advanced Phone Features
337
Call Recording
Call and Conference Recording Using a Softkey
You can record active calls or conferences by tapping the Record soft key on your phone, and
there is a time limit - 12 hours. You can set a mark while recording. This feature is useful during
important meetings or discussions, allowing you to mark some pivotal point in the discussion
that you’ll need to reference later.
The recorded video calls are saved in *.mkv format and include a date & time stamp and the
other party’s number/IP address/name (or the first person’s number/IP address/name you
called), for example, 20160302-1452-Tom was created on March 2, 2016, at 14:52 and you have
a call with Tom. The recorded audio-only calls are saved in *.aac format. ou can view the
recorded files by FileManager application.
By default, the recorded files are saved in the internal SD card. But if there is a USB flash drive
connected to your phone, the recorded files will be saved in the storage device according to the
priority: USB flash drive>internal SD card.
Note
The Record soft key controls the recording function, and is available (you need to swipe
the soft key area left to see it):
When there are one or more calls connected to your phone
During an active call
When calls are muted
During an attended transfer
During a conference call
The Record soft key is not available:
When there are no connected calls on your phone
When you place a new call (to transfer or to conference)
When the phone prompts you to answer an incoming call
The recording is not be paused when the following occurs:
You place a call on hold.
You mute a call.
If you use a record key to record a call, the recorded file will be stored in servers. For more
information, refer to Call Recording Using a Record Key on page 340.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.
User Guide for SIP-T58V/A Smart Media Phone
338
You set up a conference call
You perform the semi-attended or attended transfer
An incoming calls arrives on your phone
Call Recording
To record a call via phone user interface:
1. Swipe the soft key area left and then tap the Record soft key during a call.
If the recording starts successfully, the recording icon and recording duration will
appear on the bottom-right of the touch screen.
2. (Optional.) Tap on the bottom-right of the screen to set a mark.
The icon changes to , the number will increase if you set more marks. And there is a
red flag on this moment when playing the recorded file.
If you tap the Hold soft key or press the key while recording, only you are recorded.
If you press while recording, only the callee is recorded.
Note
You can hold, transfer or set up a conference call while recording.
Advanced Phone Features
339
When you end a call while recording, the recording will be stopped and saved automatically.
To stop recording while the phone records, do one of the following:
- Swipe the soft key area left and then tap the Stop soft key during a call.
The status bar prompts “Call has been successfully recorded on device”.
- When there is only a call on the phone, tap the EndCall soft key.
User Guide for SIP-T58V/A Smart Media Phone
340
The status bar prompts “Call has been successfully recorded on device”, the recording icon
and recording duration disappear, and the phone returns back to the idle screen.
The recording will be stored as a new file when the phone starts recording again.
Conference Recording
You can record conference calls in the same way as other calls with the following exceptions:
All conference participants are recorded while recording. If one of the participants taps the
Hold soft key or press the key, only that participant is recorded. When a conference
call is placed on hold, recording of the conference is paused. You can place or answer
other calls, which will be recorded in the same file. When the conference call is resumed,
recording of the conference resumes.
All conference participants are recorded while recording. If one of the participants
presses , only that participant is not recorded.
Call Recording Using a Record Key
You can record calls by tapping a record key on the phone. The SIP-T58V/A smart media phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends a SIP INFO message containing a specific header “Record: on/off”
to trigger a recording.
URL Record: The phone sends an HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
If you record a call using a softkey, the recorded file will be stored in the internal SD card or USB
flash drive. For more information, refer to Call and Conference Recording Using a Softkey on
page 337.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.
Call recording is not available on all servers. Contact your system administrator for more
information.
Advanced Phone Features
341
To configure a record key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Record in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Tap to accept the change or to cancel.
To configure a URL record key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap URL Record in the pop-up dialog box.
6. (Optional.) Enter the string that will appear on the touch screen in the Label field.
User Guide for SIP-T58V/A Smart Media Phone
342
7. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the URL Record field.
8. Tap to accept the change or to cancel.
Record and URL record keys are configurable via web user interface at the path DSSKey->Line
Key.
The Record and URL Record keys control the recording function, and are available:
During an active call
When calls are on hold or muted
During a conference call
The Record and URL Record keys are not available when:
There are no connected calls on your phone
You place a new call
To record a call:
1. Tap the Record key or URL Record key during a call.
If the recording starts successfully, the recording icon will appear at the bottom-right
corner of the contact avatar and the icon indicator of the Record key or URL Record key will
change to .
2. Tap the Record key or URL Record key again to stop recording.
The recording icon disappears from the bottom-right corner of the contact avatar and the
icon indicator of the Record key or URL Record key changes to .
Recording status indications you need to know:
Circumstance
Icons on the touch screen
A recording is started
appears on the touch screen
A recording cannot be started
appears for 1 second
Advanced Phone Features
343
Circumstance
Icons on the touch screen
A recording cannot be stopped
appears for 1 second, then goes back
The recording box is full
appears for 1 second
The call cannot be recorded
appears for 1 second
You can listen to the recordings stored on your server system. For example, you can dial an
access code to listen to the recordings.
Note
Hot Desking
Hot desking originates from the definition of being the temporary physical occupant of a work
station or surface by a particular employee. A primary motivation for hot desking is cost
reduction. This feature is regularly used in places where not all the employees are in the office at
the same time, or not in the office for very long, which means that actual personal offices would
be often vacant, consuming valuable space and resources.
You can use hot desking on the SIP-T58V/A smart media phone to log out of existing accounts
and then log into a new account. As a result, many users can share the phone resource at
different times. To use this feature, you need to configure a hot desking key in advance.
Note
To configure a hot desking key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Hot Desking in the pop-up dialog box.
The way in which you listen to the recordings may be different depending on the server. Contact
your system administrator for more information.
Hot desking is not available on all servers. Contact your system administrator for more
information.
User Guide for SIP-T58V/A Smart Media Phone
344
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Tap to accept the change or to cancel.
Hot desking key is configurable via web user interface at the path DSSKey->Line Key.
To use hot desking:
1. Tap the hot desking key when the phone is idle.
The touch screen prompts the following warning:
2. Tap OK.
Registration configurations of all accounts on the phone will be cleared immediately.
Advanced Phone Features
345
The login wizard will be displayed as below:
3. Enter the login information in each field.
4. Tap to accept the change or to cancel.
Intercom
Intercom is a useful feature in an office environment to quickly connect with the operator or the
secretary. You can tap the intercom key to automatically connect with a preconfigured target
extension for outgoing intercom calls, and the target extension will automatically answer
incoming intercom calls by default. You can also use intercom key to monitor the target
extension for status changes on the phone.
Note
Configuring the Intercom Feature on the Phone
Configuring an Intercom Key
To configure an intercom key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Intercom in the pop-up dialog box.
6. Tap the Account ID field.
7. Tap the desired line in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Enter the target extension number in the Value field.
Intercom is not available on all servers. Contact your system administrator for more information.
User Guide for SIP-T58V/A Smart Media Phone
346
10. (Optional.) Enter the directed call pickup code in the Extension field.
If it is configured, when the target extension receives an incoming call, you can tap the
intercom key to pick up the call directly. Contact your system administrator for more
information.
11. Tap to accept the change or to cancel.
Intercom key is configurable via web user interface at the path DSSKey->Line Key.
Incoming Intercom Calls
The SIP-T58V/A smart media phone supports automatically answering an incoming intercom
call by default. The phone automatically plays a warning tone when it receives an incoming
intercom call. In addition, you can enable the phone to mute the microphone when it
automatically answers an incoming intercom call. You can also enable the phone to
automatically answer an incoming intercom call while there is already an active call on the
phone. The active call is then placed on hold.
Intercom features you need to know:
Intercom Feature
Description
Intercom Allow
Enable or disable the IP phone to automatically answer an
incoming intercom call.
Intercom Mute
Enable or disable the IP phone’s microphone for intercom
calls.
Intercom Tone
Enable or disable the IP phone to play a warning tone
when it receives an incoming intercom call.
Intercom Barge
Enable or disable the IP phone to automatically answer an
incoming intercom call while there is already an active call
on the phone.
Intercom Allow
You can enable or disable the phone to automatically answer an incoming intercom call. If
Intercom Allow is enabled, the phone will automatically answer an incoming intercom call. If
Advanced Phone Features
347
Accept Intercom is disabled, the phone will reject incoming intercom calls and send a busy
message to the caller. Accept Intercom is enabled by default.
Note
Intercom Mute
You can mute or un-mute the phone’s microphone for intercom calls automatically. If Intercom
Mute is enabled, the microphone will be muted for intercom calls. If Intercom Mute is disabled,
the microphone will work for intercom calls. Intercom Mute is disabled by default.
Intercom Tone
You can enable or disable the phone to play a warning tone when receiving an intercom call. If
Intercom Tone is enabled, the phone will play a warning tone before answering the intercom call.
If Intercom Tone is disabled, the phone will automatically answer the intercom call without
warning. Intercom Tone is enabled by default.
Intercom Barge
You can enable or disable the phone to automatically answer an incoming intercom call while
there is already an active call on the phone. If Intercom Barge is enabled, the phone will
automatically answer the intercom call and place the active call on hold. If Intercom Barge is
disabled, the phone will handle an incoming intercom call like a waiting call. Intercom Barge is
disabled by default.
Note
To configure intercom features via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->Intercom.
Your administrator can set a period of delay time before the phone automatically answers
intercom calls. Contact your system administrator for more information.
To enable the phone to receive a new incoming call when it has an active call, make sure that call
waiting feature is enabled on the phone in advance. For more information, refer to Call Waiting
on page 308.
User Guide for SIP-T58V/A Smart Media Phone
348
3. Make the desired changes.
4. Tap to accept the change or to cancel.
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Using Intercom Feature on the Phone
You can use the intercom key in the following ways:
Place a call to the target extension.
Pick up an incoming call of the target extension.
Placing an Intercom Call to the Target Extension
To place an intercom call when the target phone is idle:
1. Tap the intercom key.
The target extension plays a warning tone and automatically answers the call in the
hands-free (speakerphone) mode by default.
Picking up an Incoming Call of the Target Extension
When the target extension receives an incoming call, the intercom key icon of the target
extension will become and solid. If you configure the directed call pickup code in advance,
you can pick up the target extension’s incoming call by tapping the intercom key. You can
configure the directed call pickup code when configuring an intercom key. For more information,
refer to Configuring an Intercom Key on page 345.
Advanced Phone Features
349
To pick up an incoming call when the target phone is ringing:
1. Tap the intercom key.
The incoming call of the target extension is answered on the IP phone.
Note
Multicast Paging
You can use multicast paging to quickly and easily broadcast time sensitive announcements out
to people who are listening to a specific multicast group and a specific channel. You can
configure a multicast paging key or a paging list key on the phone, which allows you to send a
Real Time Transport Protocol (RTP) stream to the pre-configured multicast address(es) and
channel(s) without involving SIP signaling. You can configure the phone to receive an RTP
stream from pre-configured multicast listening address(es) and channel(s) without involving SIP
signaling. You can specify up to 31 multicast listening addresses and channel(s) .
The following describes 31 paging channels:
0: You can broadcast audio to channel 0. Note that the Yealink IP phones running old
firmware version (old paging mechanism) can be regarded as listening to channel 0. It is
the default channel.
1 to 25: You can broadcast audio to a specific channel. We recommend that you specify
these channels when broadcasting with Polycom IP phones which have 25 channels you
can listening to.
26 to 30: You can broadcast audio to a specific channel. We recommend that you specify
these channels when broadcasting with Yealink IP phones running new firmware version
(new paging mechanism).
The IP phones will automatically ignore all incoming multicast paging calls on the different
channel.
Sending RTP Stream
To configure a multicast paging key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
If the directed call pickup code is not configured, the phone will place a call to the target
extension instead of picking up an incoming call of the target extension when you tap the
intercom key.
User Guide for SIP-T58V/A Smart Media Phone
350
7. Tap Multicast Paging in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
10. Enter the desired channel in the Channel field.
The valid channel ranges from 0 to 30.
11. Tap to accept the change or to cancel.
Multicast paging key is configurable via web user interface at the path DSSKey->Line Key.
To configure a paging list key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Paging List in the pop-up dialog box.
Advanced Phone Features
351
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
9. Tap to accept the change or to cancel.
Paging list key is configurable via web user interface at the path DSSKey->Line Key.
To configure paging list via phone user interface:
1. Tap the paging list key when the phone is idle.
If the paging list key is not configured, you can also swipe down from the top of the screen
or swipe left/right to go to the second idle screen. Then tap Settings->Features->Paging
List to configure the paging list.
2. Tap after the desired paging group.
3. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Address
field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4. Enter the paging group name in the Label field.
5. Enter the desired channel in the Channel field.
User Guide for SIP-T58V/A Smart Media Phone
352
The valid channel ranges from 0 to 30.
6. Tap to accept the change or to cancel.
7. Repeat steps 2 to 6, you can add more paging groups.
Paging list is configurable via web user interface at the path Directory->Multicast IP.
To delete paging group via phone user interface:
1. Tap the paging list key when the phone is idle.
Advanced Phone Features
353
2. Tap after the desired paging group.
Note
3. Tap Delete.
4. Tap OK to accept the change or Cancel to cancel.
If you want to delete all paging groups, you can tap on the top-right of the touch screen.
You can also configure the phone to use a default codec for sending multicast RTP stream via
web user interface.
To configure a default codec for multicast paging via web user interface:
1. Click on Features->General Information.
2. Select the desired codec from the pull-down list of Multicast Codec.
The icon only appears after the configured paging group.
User Guide for SIP-T58V/A Smart Media Phone
354
The default codec is G722.
3. Click Confirm to accept the change.
Note
Receiving RTP Stream
You can configure the phone to receive a Real Time Transport Protocol (RTP) stream from the
pre-configured multicast address(es) and channel(s) without involving SIP signaling. You can
specify up to 31 multicast addresses and channel(s) that the phone listens to on the network.
Note
How the phone handles incoming multicast paging calls depends on Paging Barge and Paging
Priority Active parameters configured via web user interface.
Paging Barge
Paging Barge feature defines the lowest priority of the multicast listening address from which
the phone can receive an RTP stream when there is a voice call (a normal phone call rather than
a multicast paging call) in progress. If it is disabled, all incoming multicast paging calls will be
automatically ignored. If it is set to a specify priority value, the incoming multicast paging calls
with higher or equal priority are automatically answered and the ones with lower priority are
ignored. Valid values for Paging Barge:
1 to 31: Define the lowest priority of the multicast listening address from which the phone
If G722 codec is used for multicast paging, the touch screen will display the icon to indicate
that it is providing high definition voice.
Default codec for multicast paging is configurable via web user interface only.
RTP stream is listened in the hands-free (speakerphone) mode by default. If you want to listen the
RTP stream using the engaged audio device (speakerphone, handset or headset), contact your
system administrator for more information.
Fixed volume to play RTP stream for specified paging group is configurable by your system
administrator.
Advanced Phone Features
355
can receive an RTP stream, 1 with the highest priority, 31 with the lowest.
Disabled: The voice call in progress will take precedence over all incoming paging calls.
Paging Priority Active
Paging Priority Active feature decides how the phone handles incoming multicast paging calls
when there is already a multicast paging call on the phone. If enabled, the phone will ignore
incoming multicast paging calls with lower priorities, otherwise, the phone will answer incoming
multicast paging calls automatically and place the previous multicast paging call on hold. If
disabled, the phone will automatically ignore all incoming multicast paging calls.
To configure multicast listening addresses via web user interface:
1. Click on Directory->Multicast IP.
2. Select the desired value from the pull-down list of Paging Barge.
3. Select the desired value from the pull-down list of Paging Priority Active.
4. Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which the
phone listens to for incoming RTP multicast in the Listening Address field.
5. (Optional.) Enter the label in the Label field.
Label will appear on the touch screen when receiving the multicast RTP stream.
6. Select the desired channel to listen from the pull-down list of Channel.
The default channel is 0.
7. Click Confirm to accept the change.
Note
The priorities of listening addresses are predefined: 1 with the highest priority, 31 with the lowest.
Multicast listening addresses are configurable via web user interface only.
User Guide for SIP-T58V/A Smart Media Phone
356
Using Multicast Paging
To send RTP stream via a multicast paging key when the receiver’s phone is idle:
1. Tap the multicast paging key when the phone is idle.
The phone sends RTP to a preconfigured multicast address (IP: Port).
Both the sender’s and receiver’s phones play a warning tone and the receiver automatically
answers the multicast RTP session in the hands-free (speakerphone) mode.
The multicast paging key icon will become and solid.
The following figure shows a multicast RTP session on the phone:
2. Your can do the following:
Tap the Hold soft key to place the current multicast RTP session on hold.
The sender’s phone places the multicast RTP session on hold and receiver’s phone
releases the session.
To resume the held multicast RTP session, tap the Resume soft key.
The multicast RTP session is established again.
Tap the EndCall soft key to cancel the multicast RTP session.
Tap the Record soft key to record a call.
To stop recording, tap the Stop soft key.
Note
To send RTP stream via a paging key list when the receiver’s phone is idle:
1. Tap paging list key when the phone is idle.
2. Do one of the following to send RTP:
- Tap the desired paging group.
Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For
outgoing RTP multicasts, all other existing calls on the phone will be placed on hold.
Advanced Phone Features
357
- Tap after the desired paging group, and then tap Multicast Paging.
3. Your can do the following:
Tap the Hold soft key to place the current multicast RTP session on hold.
The sender’s phone places the multicast RTP session on hold and receiver’s phone
releases the session.
To resume the held multicast RTP session, tap the Resume soft key.
The multicast RTP session is established again.
Tap the EndCall soft key to cancel the multicast RTP session.
Tap the Record soft key to record a call.
To stop recording, tap the Stop soft key.
Music on Hold
Music on hold (MoH) is the business practice of playing recorded music to fill the silence that
would be heard by the party placed on hold. To use this feature, you should specify a SIP URI
pointing to a Music on Hold Server account. When a call is placed on hold, the phone will send a
SIP INVITE message to the Music on Hold Server account. The Music on Hold Server account
automatically answers the SIP INVITE messages and immediately plays audio from some source
located anywhere (LAN, Internet) to the held party. Contact your system administrator for the
SIP URI.
To configure music on hold server via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the SIP URI (e.g., sip:moh@sip.com) in the Music Server URI field.
4. Click Confirm to accept the change.
User Guide for SIP-T58V/A Smart Media Phone
358
When you place a call on hold, music will be played to the held party.
Note
Automatic Call Distribution (ACD)
ACD is often used in offices for customer service, such as call center. The ACD system handles
large volumes of incoming calls from callers who have no need to talk to a specific person but
who require assistance from any of multiple persons at the earliest opportunity. ACD on the
SIP-T58V/A IP phone allows the ACD system to distribute large volumes of incoming calls to the
registered ACD users. To use this feature, you should configure an ACD key in advance. For
more information on ACD key LED indicators, refer to Line Key Icons on page 17.
Note
To configure an ACD key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap ACD in the pop-up dialog box.
6. (Optional.) Enter the string that will appear on the touch screen in the Label field.
7. Tap to accept the change or to cancel.
ACD key is configurable via web user interface at the path DSSkey->Line Key.
For this feature to function, all involved parties cannot use encrypted RTP (SRTP).
Music on hold server is configurable via web user interface only.
ACD is not available by default. Check with your system administrator to find out if this feature is
available on your phone.
Advanced Phone Features
359
To log into the ACD system:
1. Tap the ACD key when the phone is idle.
The touch screen prompts you the following information:
User ID: the identity used to log into the queue.
Password: the password used to log into the queue.
2. Tap Login to log in.
Note
After configuring an ACD key, you can tap the ACD key to log into the ACD system. After logging
in, you are ready to receive calls from the ACD system. You can tap the ACD key to show your
current ACD user status. You can tap Available/Unavailable to change your ACD user status.
ACD user status synchronizes on both IP phone and ACD system.
When you set the ACD user status to be available, the ACD key icon indicator will become
and solid, and then the server begins distributing calls to your IP phone.
When you set the ACD user status to be unavailable, the ACD key icon indicator will become
and flashing, and then the server temporarily stops distributing calls to your IP phone. To log
out of the ACD system, tap Logout.
Note
Shared Call Appearance (SCA)
You can use SCA feature to share an extension which can be registered on two or more IP
phones at the same time. The shared line is indicated by a different line icon.
Contact your system administrator for the User ID and Password to access the ACD system.
It is recommended that you configure only one ACD key per phone, since only one ACD key can
be in use on your phone at any time.
User Guide for SIP-T58V/A Smart Media Phone
360
In the following figure, the first line is shared and the second line is private:
If two phones share a line, an incoming call to this extension will cause both phones to ring
simultaneously. The incoming call can be answered on either phone but not both.
This feature is very useful in the boss and secretary scenario. For example, the secretary can
share the boss's extension on her phone. When there is an incoming call to the extension of the
boss, both the phones of the boss and the secretary will ring simultaneously. Either the boss or
the secretary can answer the call. Calls on the shared line can be placed on hold, barged in or
retrieved from another shared phone.
Advanced Phone Features
361
Configuring SCA Feature on the IP Phone
You can configure a primary account on the IP phone and other alternate accounts on the other
IP phones. In a SCA Hybrid Key System scenario, you can automatically assign multiple DSS keys
with Line type for a registered shared line on the phone (If auto linekeys feature is enabled). For
example, party A, party B share the account 4603, phone A registers the primary account 4603
and assigns line key 1 and line key 2 for the account 4603, phone B registers the alternate
account 4603_1 and assigns line key 1 and line key 2 for the account 4603_1, phone C registers
the account 4604.
To configure the auto linekeys feature via web user interface:
1. Click on Features-> General Information.
2. Select Enabled from the pull-down list of Auto LineKeys.
User Guide for SIP-T58V/A Smart Media Phone
362
If Auto LineKeys is enabled, you can automatically assign multiple DSS keys with Line type
for a registered shared line on the phone.
3. Click Confirm to accept the change.
Advanced Phone Features
363
To configure the shared line settings and the number of line key on phone A via web user
interface:
1. Register the primary account 4603.
2. Click on Advanced, and then select Share Call Appearance from the pull-down list of
Shared Line.
3. Enter the desired number in the Number of line key field.
This field appears only if Auto Linekeys feature is enabled.
User Guide for SIP-T58V/A Smart Media Phone
364
The default value is 1. In this example, the value is set to 2.
4. Click Confirm to accept the change.
The phone A will automatically configure the line keys from the first unused DSS key, according
to the configured number in the Number of line key field.
Advanced Phone Features
365
To configure the shared line settings and the number of line key on phone B via web user
interface:
1. Register the alternate account 4603_1.
(Enter the primary account 4603 in the Register Name field.)
2. Click on Advanced, and then select Share Call Appearance from the pull-down list of
Shared Line.
3. Enter the desired number in the Number of line key field.
This field appears only if Auto Linekeys feature is enabled.
User Guide for SIP-T58V/A Smart Media Phone
366
The default value is 1. In this example, the value is set to 2.
4. Click Confirm to accept the change.
The phone B will automatically configure the line keys from the first unused DSS key, according
to the configured number in the Number of line key field.
Configuring Private Hold Soft Key or Private Hold Key
Public hold allows any shared line to retrieve the held call. Private hold only allows the hold
party to retrieve the held call. For example, you can retrieve the held call on either phone A or
phone B when you place a call on public hold; you can retrieve the held call only on phone A
when you place a call on private hold on phone A. By default, the private hold soft key isn’t
displayed on the touch screen. You need to configure either the private hold soft key or a
private hold key before you place the call on private hold.
To configure the private hold soft key via web user interface:
1. Click on Settings->Softkey Layout.
2. Select Enabled from the pull-down list of Custom Softkey.
3. Select On Talk from the pull-down list of Call States.
4. Select Private Hold from the Unselected Softkeys column and then click .
Advanced Phone Features
367
The Private Hold appears in the Selected Softkeys column.
5. Click Confirm to accept the change.
Note
To configure a private hold key via phone user interface:
1. Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
2. Tap Settings->Features->DSS Keys.
3. Tap the desired line key.
4. Tap the Type field.
5. Tap Key Event in the pop-up dialog box.
6. Tap the Key Type field.
7. Tap Private Hold in the pop-up dialog box.
8. (Optional.) Enter the string that will appear on the touch screen in the Label field.
Configuring the private hold soft key may affect the softkey layout in the Talking state. Contact
your administrator for more information.
User Guide for SIP-T58V/A Smart Media Phone
368
9. Tap to accept the change or to cancel.
Configuring Call Pull Feature
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or public hold status.
To configure the call pull feature access code via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access Code field.
4. Click Confirm to accept the change.
The phone will dial out “*11” automatically when you tap the CallPull soft key.
Using SCA Feature on the IP Phone
This section provides you with detailed information on using the SIP-T58V/A smart media phone
in a SCA Hybrid Key System scenario. In a SCA Hybrid Key System scenario, the status of the line
key icon which associates with a shared line will change. For more information on line key icon,
refer to Icon Instructions on page 16.
You can do the following using the IP phone in a SCA Hybrid Key System scenario:
Place calls
Answer calls
Place a call on hold
Retrieve a held call
Advanced Phone Features
369
Barge in an active call
Call Pull
Placing Calls
You can have one call or multiple calls on the shared line.
To place a call on the shared line:
Do one of following:
- Enter the desired number using the keypad or the dial pad on the touch screen when the
phone is idle.
Press , or tap Send.
The phone will dial the entered number using the first line key.
- Tap the line key when the phone is idle to enter the dialing screen.
Enter the desired number using the keypad or the dial pad on the touch screen and then
press , or tap Send.
The phone will dial the entered number using the selected line key.
To place multiple calls on the shared line:
You can have more than one call on the shared line. To place a new call when there is an active
call on the line key 1 of phone A, do one of the following on phone A:
- Press or tap the Hold soft key. The original call is placed on hold.
Tap the NewCall soft key to enter the dialing screen.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press , or tap Send.
Phone A will dial the entered number using the line key 2 automatically.
- Tap the line key. The original call is placed on hold.
Enter the desired number using the keypad or the dial pad on the touch screen.
Press , or tap Send.
Phone A will dial the entered number using the selected line key.
Answering Calls
You can have one call or multiple calls on the shared line. Incoming calls will be distributed
evenly among the available line keys.
To answer a call on the shared line:
When an incoming call arrives on the shared line, the phone A and phone B will ring
simultaneously, and the icon indicators of the line key 1 on both phone A and phone B will
become and flashing. You can answer the incoming call on either phone A or phone B but
not both.
User Guide for SIP-T58V/A Smart Media Phone
370
Do one of the following on phone A or phone B:
- Tap the line key 1, or tap the Answer soft key on phone A.
The icon indicators of the line key 1 on phone A and phone B will become and solid.
- Tap the line key 1, or tap the Answer soft key on phone B.
The icon indicators of the line key 1 on phone A and phone B will become and solid.
To answer multiple calls on the shared line:
An incoming call arrives on the shared line when there is an active call on phone A’s line key 1.
The icon indicators of the line key 2 on both phone A and phone B will become and
flashing. You can answer the incoming call on either phone A or phone B. The touch screen of
phone A displays the information of the incoming call (e.g., “Incoming call pbx.yealink.com”).
Note
Do one of the following on phone A:
- Tap the line key 2. Phone B stops ringing.
- Tap the Answer soft key. Phone B stops ringing.
- Tap the incoming call prompt box.
Tap the Answer soft key. Phone B stops ringing.
The incoming call is answered and the original call is placed on hold. The icon indicators of the
line key 1 on phone A and phone B will become and solid indicating that there is the held
call on the line key 1. The icon indicators of the line key 2 on phone A and phone B will become
and solid indicating that there is an active call on the line key 2.
You can also answer the call on phone B. Do one of the following on phone B:
- Tap the line key 2. Phone A stops ringing.
Make sure call waiting feature is enabled on phone A. For more information, refer to Call Waiting
on page 308.
Advanced Phone Features
371
- Tap the Answer soft key. Phone A stops ringing.
The icon indicators of the line key 2 on phone A and phone B will become and solid
indicating that there is an active call on the line key 2. Meanwhile, the icon indicators of the
line key 1 phone A and phone B will become and solid indicating that there is the held
call on the line key 1.
Note
Placing a Call on Hold
To place a call on public hold:
1. Press or tap the Hold soft key on phone A when party A and party C are talking.
The icon indicators of line key 1 on phone A and phone B will become .
To place a call on private hold:
1. Press the PriHold soft key or private hold key on phone A when there is an active call on
the shared line (You may need to swipe the soft key area left to see the PriHold soft key).
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
User Guide for SIP-T58V/A Smart Media Phone
372
The icon indicators of line key 1 on phone A will become when the shared line call is
placed on private hold.
The icon indicators of line key 1 on phone B will become when the shared line call is
placed on private hold.
Retrieving a Held Call
To retrieve a call placed on public hold:
You can retrieve the public held call on either phone A or phone B.
To retrieve the call on phone A:
1. Tap , press or tap the Resume soft key.
The conversation between phone A and phone C is retrieved.
To retrieve the call on phone B:
Do one of the following:
- Tap .
- Long tap the desired line key. The Cancel, CallPull, NewCall and Retrieve soft keys appear
on the touch screen.
Tap the Retrieve soft key to retrieve the call.
The conversation is established between phone B and phone C, phone A disconnects the call.
And the line key icon on phone A and phone B will become .
To retrieve a call placed on private hold:
The private held call can be only retrieved by the hold party (party A).
Do the following:
1. Tap , press or tap the Resume soft key on phone A.
The conversation between phone A and phone C is retrieved.
Advanced Phone Features
373
Barging In an Active Call
To interrupt the active call on the shared line:
If phone A has only one active call, do the following:
1. Long tap the desired line key on phone B.
The Cancel, CallPull, NewCall and Barge In soft keys appear on the touch screen of phone
B.
2. Tap the Barge In soft key to interrupt the active call of phone A.
Party B will set up a conference call with the other parties in the active call.
3. Press , tap the Hold soft key or the EndCall soft key.
- If any party in the conference call presses or taps the Hold soft key, two-way
voice can be heard between the remaining parties.
- If party A or party B taps the EndCall soft key, the remaining parties are still connected.
If the other party (not the shared line party) taps the EndCall soft key, the conference
call is ended.
You can also tap the line key with the solid red icon indicator on phone B to set up a conference
call with the other parties in the active call.
User Guide for SIP-T58V/A Smart Media Phone
374
If phone A has more than one call, do the following:
1. Long tap the desired line key on phone B.
The list of calls appears on the touch screen of phone B.
2. Tap the item to select the active call.
The Cancel, CallPull, NewCall and Barge In soft keys appear when the active call is
highlighted.
3. Tap the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other parties of
the active call.
4. Press , tap the Hold soft key or the EndCall soft key.
- If any party in the conference call presses , taps the Hold soft key, two-way voice
can be heard between the remaining parties.
- If party A or party B taps the EndCall soft key, the remaining parties are still connected.
If the other party (not the shared line party) taps the EndCall soft key, the conference
call is ended.
Advanced Phone Features
375
Call Pull
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or hold status. For example, when there is a call between phone A and phone C, you can
use call pull feature on phone B to retrieve this call from phone A. Then the call is established
between phone B and phone C.
To retrieve a call from another shared phone:
If there is an active call between phone A and phone C, do the following:
1. Long tap the desired line key on phone B.
The Cancel, CallPull, NewCall and Barge In soft keys appear on the touch screen of
phone B.
2. Tap the CallPull soft key.
The active call has been retrieved from the phone A successfully.
If there is a held call between phone A and phone C, do the following:
1. Long tap the desired line key on phone B.
The Cancel, CallPull, NewCall and Retrieve soft keys appear on the touch screen of
phone B.
User Guide for SIP-T58V/A Smart Media Phone
376
2. Tap the CallPull soft key.
The held call has been retrieved from the phone A successfully.
Message
Video/Voice Mail
You can leave video/voice mails for someone else using the SIP-T58V/A smart media phone.
You can also access the video/voice mails that are stored in the voice mailbox. The usage of
video mail is the same as that of voice mail, the following takes voice mail as an example.
Note
When receiving a new voice mail, the phone will play a warning tone. The power indicator LED
will slowly flash red, and the touch screen will prompt “n New Voice Mail(s)” (“n” indicates the
number of unread voice mails, e.g., 176 New Voice Mail(s)) and display an icon .
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
The icon on the status bar has a counter indicating the number of messages you haven’t
heard yet.
Video/voice mail is not available on all servers and differs from different servers. Contact your
system administrator for more information.
Advanced Phone Features
377
Leaving Voice Mails
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
Configuring the Voice Mail Access Codes
To configure voice mail access codes via phone user interface:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Message application.
3. Tap Set Voice Mail.
4. Enter the voice mail access code (e.g., *88) in the desired account field.
5. Tap to accept the change or to cancel.
Note
Listening to Voice Mails
To listen to voice mails:
1. When the touch screen prompts that the phone receives a new voice mail, press or
tap Connect to dial out the voice mail access code.
2. Follow the voice prompt to listen to your voice mails.
Note
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.
Before listening to voice mails, ensure that the voice mail access code has been configured. For
more information, refer to Configuring the Voice Mail Access Codes on page 377.
User Guide for SIP-T58V/A Smart Media Phone
378
To view the voice mail via phone user interface:
1. Swipe left or right to go to the second idle screen.
2. Tap to launch Message application.
3. Tap View Voice Mail.
The touch screen displays the amount of new and old voice mails.
You can tap the account to listen to voice mails.
Message Waiting Indicator (MWI)
The SIP-T58V/A smart media phone supports MWI when receiving a new voice mail. If someone
leaves you a voice mail, you will receive a message waiting indicator. MWI will be indicated in
three ways: a warning tone, an indicator message (including a voice mail icon) on the touch
screen, and the power indicator LED slowly flashes red. This will be cleared when you retrieve all
voice mails or delete them.
The MWI service is unsolicited for some servers, so the SIP-T58V/A smart media phone only
handles the MWI messages sent from the server. But for other servers, the MWI service is
solicited, so the SIP-T58V/A smart media phone must enable subscription for MWI.
Note
The MWI subscription parameters you need to know:
Options
Description
Subscribe for MWI
Enable or disable a subscription for MWI service.
MWI Subscription Period
Period of MWI subscription. The IP phone sends a refresh
SUBSCRIBE request before initial subscription expires.
Subscribe MWI To Voice
Enable or disable a subscription to the voice mail number
MWI service is not available on all servers. Contact your system administrator for more
information.
Advanced Phone Features
379
Options
Description
Mail
for MWI service.
To use this feature, you should also configure the voice
mail number.
Note
To configure subscribe for MWI via web user interface
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Enter the period time in the MWI Subscription Period(Seconds) field.
5. Click Confirm to accept the change.
The IP phone will subscribe to the account number for MWI service by default.
To enable subscribe MWI to voice mail via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Enabled from the pull-down list of Subscribe for MWI.
4. Select Enabled from the pull-down list of Subscribe MWI To Voice Mail.
The phone will send SUBSCRIBE messages for MWI service to the account or the voice number
MWI service depending on the server. Contact your system administrator for more information.
User Guide for SIP-T58V/A Smart Media Phone
380
5. Enter the desired voice mail number in the Voice Mail field.
6. Click Confirm to accept the change.
The IP phone will subscribe to the voice mail number for MWI service using Subscribe MWI
To Voice Mail.
Note
MWI subscription is configurable via web user interface only.
Appendix A-Time Zones
381
Appendix A - Time Zones
Time Zone
Time Zone Name
-11
Samoa
-10
United States-Hawaii-Aleutian, United States-Alaska-Aleutian
-9:30
French Polynesia
-9
United States-Alaska Time
-8
Canada(Vancouver,Whitehorse), Mexico(Tijuana,Mexicali), United
States-Pacific Time
-7
Canada(Edmonton,Calgary), Mexico(Mazatlan,Chihuahua), United
States-MST no DST, United States-Mountain Time
-6
Guatemala, El Salvador, Honduras, Nicaragua, Costa Rica, Belize,
Canada-Manitoba(Winnipeg), Chile(Easter Islands), Mexico(Mexico
City,Acapulco), United States-Central Time
-5
Peru, Bahamas(Nassau), Canada(Montreal,Ottawa,Quebec),
Cuba(Havana), United States-Eastern Time,
-4:30
Venezuela(Caracas)
-4
Canada(Halifax,Saint John), Chile(Santiago), Paraguay(Asuncion),
United Kingdom-Bermuda(Bermuda), United Kingdom(Falkland
Islands), Trinidad&Tobago
-3:30
Canada-New Foundland(St.Johns)
-3
Argentina(Buenos Aires), Brazil(DST), Brazil(no DST),
Denmark-Greenland(Nuuk)
-2:30
Newfoundland and Labrador
-2
Brazil(no DST)
-1
Portugal(Azores)
0
Denmark-Faroe Islands(Torshavn), GMT, Greenland, Ireland(Dublin),
Morocco, Portugal(Lisboa,Porto,Funchal), Spain-Canary Islands(Las
Palmas), United Kingdom(London)
+1
Albania(Tirane), Austria(Vienna), Belgium(Brussels),
Caicos, Chad, Croatia(Zagreb), Czech Republic(Prague),
Denmark(Kopenhagen), France(Paris), Germany(Berlin),
Hungary(Budapest), Italy(Rome), Luxembourg(Luxembourg),
Macedonia(Skopje), Namibia(Windhoek), Netherlands(Amsterdam),
Spain(Madrid)
+2
Estonia(Tallinn), Finland(Helsinki), Gaza Strip(Gaza), Greece(Athens),
Israel(Tel Aviv), Jordan(Amman), Latvia(Riga), Lebanon(Beirut),
Moldova(Kishinev), Romania(Bucharest), Russia(Kaliningrad),
Syria(Damascus), Turkey(Ankara), Ukraine(Kyiv, Odessa)
+3
East Africa Time, Iraq(Baghdad), Russia(Moscow)
+3:30
Iran(Teheran)
+4
Armenia(Yerevan), Azerbaijan(Baku), Georgia(Tbilisi),
Kazakhstan(Aktau), Russia(Samara)
+4:30
Afghanistan(Kabul)
+5
Kazakhstan(Aqtobe), Kyrgyzstan(Bishkek), Pakistan(Islamabad),
Russia(Chelyabinsk)
+5:30
India(Calcutta)
+5:45
Nepal(Katmandu)
+6
Kazakhstan(Astana, Almaty), Russia(Novosibirsk,Omsk)
+6:30
Myanmar(Naypyitaw)
+7
Russia(Krasnoyarsk), Thailand(Bangkok)
+8
Australia(Perth), China(Beijing), Russia(Irkutsk, Ulan-Ude),
Singapore(Singapore)
+8:45
Eucla
+9
Japan(Tokyo), Korea(Seoul), Russia(Yakutsk,Chita)
+9:30
Australia(Adelaide), Australia(Darwin)
+10
Australia(Brisbane), Australia(Hobart),
User Guide for SIP-T58V/A Smart Media Phone
382
Time Zone
Time Zone Name
Australia(Sydney,Melboume,Canberra), Russia(Vladivostok)
+10:30
Australia(Lord Howe Islands)
+11
New Caledonia(Noumea), Russia(Srednekolymsk Time)
+11:30
Norfolk Island
+12
New Zealand(Wellington,Auckland), Russia(Kamchatka Time)
+12:45
New Zealand(Chatham Islands)
+13
Tonga(Nukualofa)
+13:30
Chatham Islands
+14
Kiribati
Index
383
Index
A
About This Guide v
Account Management 168
Account Registration 168
Activating/Deactivating the Bluetooth Mode
136
Adding a Contact to the Blacklist 128
Adding a Widget to the Idle Screen 181
Adding Contacts 106
Adding Groups 103
Administrator Password 90
Advanced Phone Features 327
Alarm 252
Anonymous Call 322
Anonymous Call Rejection 323
Answering Calls 267
Answering When in Another Call 268
Answering When Not in Another Call 267
Area Code 175
Appendix A - Time Zones 381
APP Accounts 188
Assigning Functionality to a Line Key 152
Attended Transfer 307
Audio Settings 94
Audio-only/Video Call Selection 268
Auto Answer 279
Auto Redial 280
B
Backlight 82
Barging In an Active Call 373
Basic Network Settings 58
Basic Phone Features 263
Blacklist 120
BLF List 333
Blind Transfer 304
Block Out 176
Bluetooth-Enabled Mobile Phone 143
Bluetooth Headset 136
Browser 239
Browsing a Web Page 239
Busy Lamp Field (BLF) 327
C
Calculator 251
Calendar 247
Call and Conference Recording Using a
Softkey 337
Call Completion 282
Call Forward 292
Call Mute/Un-mute 284
Call History Management 126
Call Hold/Resume 286
Call Park 314
Call Pickup 314
Call Recording 337
Call Recording Using a Record Key 340
Call Transfer 304
Call Waiting 308
Camera 228
Camera Settings 230
Changing Video Call Settings 272
Changing the Video Layout during Calls
273
Checking Events 249
Clearing the Navigation History 246
Clock 252
Conference 309
Configuration Screen Display 44
Configuring an Access URL 121
Configuring the BLF Feature on the Phone
327
Configuring the Intercom Feature on the
Phone 345
Configuring SCA Feature on the IP Phone
361
Connecting to the Wired Network 36
Connecting to the Wireless Network 36
Contact Management 102
Control Center/Notification Center 41
Copying Files 200
Creating an Event 249
Creating a Folder 185
Customizing Your Phone 71
Cutting Files (Moving Files) 202
D
Declaration of Conformity ii
Default Account 170
Deleting a Line Key 155
Deleting Contacts 111
Deleting Emails 235
Deleting Files 203
Deleting Groups 105
Deleting History Records 129
Deleting Pictures/Videos 217
Directed Call Pickup 319
Disabling Wi-Fi Feature 68
Dial-now 173
Dial Plan 171
Dialing Screen Display 45
Disabling History Records 131
Disconnecting the Bluetooth Device 140
Disconnecting the Wireless Network
Connection 67
Do Not Disturb (DND) 287
Documentations 27
DSS Keys 151
Dual Headset 135
Dynamic Forwarding 303
User Guide for SIP-T58V/A Smart Media Phone
384
E
Editing Contacts 110
Editing Device Information 140
Editing Groups 104
Editing Pictures 212
Email 232
Email Options 236
Email Widget 238
Emergency Number 177
Ending Calls 268
Entering Data and Editing Fields 50
Exchanging Places of Line Keys 153
F
Feature Status Icons 16
FileManager 195
G
Gallery 208
General Settings 71
Getting Started 29
Going to the Idle Screen during a Call 271
Group Call Pickup 321
H
Hardware Component Instructions 13
Headset Use 133
Headset Mode Activation/Deactivation
134
Headset Prior 134
Hotline 178
Hot Desking 343
I
Icon Instructions 16
Idle Screen 37
Importing/Exporting Contact lists 117
In This Guide v
Incoming/Outgoing Call Lookup 122
Incoming Intercom Calls 346
Input Method 85
Intercom 345
K
Key as Send 90
Key Tone 99
L
Language 84
Leaving Voice Mails 377
LED Instructions 22
Line Key Icons 16
Line Key Features 158
Line Keys 151
Live Dialpad 177
Listening to Voice Mails 377
Local Conference 309
Local Directory 103
M
Making the Phone Discoverable 139
Managing Applications and Widgets 181
Managing Bookmarks 240
Managing Running Applications 188
Managing Recorded Audios 225
Manually Connect an Available Wireless
Network 61
Message 376
Message Waiting Indicator (MWI) 378
Mobile Contacts 123
Modifying Browser Settings 247
Modifying the Calendar Settings 251
Moving an Application or Widget 184
Multicast Paging 349
Multiple Email Accounts 237
Multiple Line Keys per Account 171
Music on Hold 357
Mute a Call 284
N
Navigating Menus and Fields 41
Network Conference 312
Network Connection 36
Notification Sound 101
O
Other Icons 19
Outgoing Intercom Calls 345
Overview 13
Optional Accessories 31
P
Packaging Contents 29
Pairing and Connecting the Bluetooth Device
136
Performing Operations during a Call 270
Phone Initialization 36
Phone Installation 31
Phone Lock 91
Phone Status 55
Phone User Interface 23
Placing a Call from History Records 127
Placing Calls 264
Placing Calls to Contacts 115
Power Saving 79
Previewing the Near-Site Video 277
Programable Keys 165
Printing Pictures 215
R
Reading Emails 234
Recall 283
Recent Call In Dialing 277
Index
385
Receiving Files via Bluetooth 149
Receiving RTP Stream 354
Recorder 223
Recording Videos 229
Recording Audios 224
Redialing Numbers 277
Registration 37
Renaming the Paired Bluetooth Device
140
Remote Phone Book 121
Removing a Widget from the Idle Screen
185
Replace Rule 172
Resizing a Widget 183
Returning to the Call Screen 272
Ring Tones 97
S
Screen Saver 76
Screenshot 335
Search Source List in Dialing 131
Semi-Attended Transfer 306
Searching Files 199
Searching for Contacts 116
Sending Emails 232
Sending Files via Bluetooth 149
Sending Files via Email 239
Sending Pictures 204
Sending Pictures/Videos 219
Sending RTP Stream 349
Setting a Home Page 244
Shared Call Appearance (SCA) 358
Signing In Calendar 247
Signing In Email 232
Silent Mode 101
Static Forwarding 293
Stopping Transmitting Video during a Call
272
Stopwatch 260
System Applications 181
System Customizations 133
T
Table of Contents vii
Taking Pictures 229
Taking a Picture/Video 218
The Home Screen 38
The Second Idle Screen 39
The Third Idle Screen 40
Touch Sounds 100
Time & Date 87
Timer 259
U
Unpairing the Bluetooth Device 142
Uploading Contact Photos 113
Uploading the Custom Picture via Web
User Interfaces 23
Using BLF Feature on the Phone 331
Using the Onscreen Keyboard 51
Using the Phone Keypad and Onscreen Dial
Pad 55
Using the Touch Screen 37
Using Intercom Feature on the Phone 348
Using Multicast Paging 356
Using SCA Feature on the IP Phone 368
V
Volume 94
Viewing Detail Information of the
Pictures/Videos 215
Viewing Files 196
Viewing History Records 126
Viewing Pictures/Videos 209
Viewing the Connected Wireless Network
Information 67
Video Call Screen Display 47
Video Call Full-Screen Display (Both Far- and
Near-Site Videos Exist) 49
Video/Voice Mail 376
W
Warranty ii
Wallpaper 71
Web User Interface 23
Wi-Fi Protected Setup (WPS) 63
Wireless Network Settings 60