APC 66071 User Manual
Displayed below is the user manual for 66071 by APC which is a product in the UPS Accessories category. This manual has pages.
Related Manuals
5102919700/BC
Installation and user
manual
English
Français
MultiSlot
Extension module
for communication
cards
5102919700/BC
............................... i
English version ........ 1
Version française ...13
5102919700/BC
5102919700/BC
5102919700-BC
990-5102919700AC
5102919700/BC - Page i
Sicherheitshinweise
Die Installierung und die Nutzung des MultiSlot-
kastens können von jeder Person vorgenommen
werden, die sich an die Anweisungen des
vorliegenden Handbuchs hält. Doch, sollte es
Probleme geben, setzen Sie sich bitte mit dem APC
by Schneider Electric Kundendienst in Verbindung.
Es ist wichtig, die Einzelschritte zu
befolgen. Ein Nichtbeachten kann zu
Gefährdung von Personen, Schäden an
der Anlage, sowie dem Verlust der
Herstellergarantie führen. Arbeiten, die
das Öffnen der Geräte notwendig
machen, dürfen nur von Elektro-
Fachpersonal durchgeführt werden.
Für weitergehende Informationen zur USV-Anlage
möchten wir auf die Bedienungs- und
Installationsanleitung USV hinweisen.
Consegne di sicurezza
L'installazione e la gestione del modulo MultiSlot
possono essere realizzate da qualsiasi operatore
che si conformi alle indicazioni riportate nel
presente manuale. Eppure, se incontrate difficoltà,
noi vi raccomandiamo di consultare il nostro
servizio assistenza dopo vendita.
E’ imperativo seguire rigorosamente le
procedure descritte. Se non si
rispettano queste procedure puo’ essere
pericoloso per le persone, cagionare
danni ed annullare la garanzia del
costruttore. Tutte le operazioni di
riparazione o di manutenzione devono
essere effettuate dai nostri servizi.
Per maggiori dettagli concernente l'UPS, riferirsi al
"libretto d’installazione e d’istruzioni" fornito con
questo apparecchio.
Consignas de seguridad
Cualquier persona que se conforme a las indicaciones
establecidas en el presente manual podrá realizar la
instalación y la explotación del módulo MultiSlot.
Si ocurre un problema al poner en práctica los
procedimientos descritos en este manual, le
recomendamos consultar nuestro servicio de postventa.
Es imperativo respetar rigurosamente
los procedimientos descritos. No
respetar estos procedimientos puede
acarrear peligro para las vidas humanas,
ocasionar perjuicios y anular la garantía
del fabricante. Toda operación de
reparación o mantenimiento debe ser
efectuada por nuestros servicios.
Para mayores detalles sobre el SAI, consultar el
"manual de instalación e instrucciones"
suministrado con el aparato.
Regras de segurança
A instalação e a exporação da caica MultiSlot
podem ser realizadas por qualquer pessoa que
cumpra as indicações mencionadas no presente
manual. Caso algum problema se apresente,
recomendamos consultar nosso serviçio apõs venda.
É imperativo que os procedimentos
descritos sejam seguidos
rigorosamente. O desrespeito dos
mesmos procedimentos pode ocasionar
perigos para as pessoas, causar avarias
no aparelho, e anular a garantia do
fabricante. Toda operação de conserto
ou de manutenção deve ser efetuada por
nossos serviços.
Para mais detalhes concernentes ao aparelho,
referir-se ao "manual de instalação e de utilização"
fornecido com o aparelho.
Safety guidelines
The MultiSlot module can be installed and
operated by all persons following the instructions
given in this manual. However, if you encounter a
problem, we recommend that you contact our after-
sales support service.
It is imperative that the instructions be
followed strictly. Not adhering to these
instructions may endanger personnel,
result in damage and render the
manufacturer’s warranty void. All repair
or maintenance operations must be
carried out by our after-sales support
personnel.
For more information on the UPS, please refer to
its "installation and user manual".
Consignes de sécurité
L'installation et l'exploitation du module MultiSlot
peuvent être réalisées par toute personne se
conformant aux indications portées dans le présent
manuel. Cependant, si vous rencontrez un
problème, nous vous recommandons de consulter
notre service après-vente.
Il est impératif de suivre les procédures
décrites. Leur non respect peut
entraîner des dangers pour les
personnes, occasionner des
dommages et annuler la garantie
constructeur. Toute opération de
dépannage ou de maintenance doit être
effectuée par nos services.
Pour plus de détails concernant l'ASI, se référer
au "manuel d’installation et d’utilisation" fourni avec
l’appareil.
Page ii - 5102919700/BC
Veiligheidsvoorschriften
De MultiSlotkast kan worden geïnstalleerd en
bediend door elke persoon die de instructies in
deze handleiding strikt opvolgt. Indien u een
probleem, kunt u het beste contact opnemen met
onze service afdeling.
Het is noodzakelijk dat u de instructies
strikt opvolgt. Het niet opvolgen van
deze instructies kan het personeel in
gevaar brengen, resulteren in schade
en de garantie komt te vervallen.
Alle reparatie- en
onderhoudswerkzaamheden moeten
uitgevoerd worden door ons service
personeel.
Voor meer informatie betreffende de UPS, zie de
"installatie- en gebruikershandleiding".
Sikkerhedsforskrifter
MultiSlotboksen kan Installeres og bruges af
allepersoner, der følger instruktionerne i denne manual.
Pas på ! Skulle De støde på problemer, til trods for at
De har fulgt anvisningerne i vores instruktionsbog, bør
De henvende Dem til vores kundeservice.
Det er absolut nødvendigt at følge
anvisningerne i instruktionsbogen.
Hvis De ikke overholder dem, risikerer
De at udsætte Deres personal for fare,
at apparatet bliver beskadiget, og at
garantien i så fald bordfalder.
Reparation og vedligeholdelse bør kun
foretages af vore teknikere.
Ønsker De mere detaillerede oplysninger
vedrørende apparatet, kan De finde dem i vores
instruktionsbog, som bliver leveret sammen med
apparatet.
Sikkerhedsforskrifter
MultiSlotboksen kan installeres og brukes av alle
personer som følger instruksjonene i denne
veiledningen. Dersom det oppstår problemer, bør
du ta kontakt med vår serviceavdeling.
Det er ytterst viktig at du følger
fremgangsmåten som er beskrevet i
håndboken, til punkt og prikke.
Operasjoner utført i strid med disse
retningslinjerne kan forårsake
personskader eller skader på apparatet
og annullere fabrikantens garanti.
Alle reparasjons-og
vedlikeholdsinngrep må utføres av vårt
servicepersonale.
Trenger du flere opplysninger om apparatet, kan
du slå opp i "Håndbok for installering og bruk" som
følger med apparatet.
Säkerhetsföreskrifter
MultiSlotboxen kan installeras och användas av
alla som följer de instruktioner som ges i den här
manualen. Om Du stöter på problem,
rekommenderar vi att Du kontaktar vår
serviceverkstad.
Det är mycket viktigt att Du noggrant
följer instruktionerna i denna
bruksanvisning. Om instruktionerna
inte följs kan materialet skadas och bli
farlig att använda. Dessutom upphör
tillverkarens garanti att gälla.
Reparationer och underhåll får endast
utföras av kvalificerad fackman.
Mer utförlig information om materialet hittar Du i
bruksanvisningen för installation och användning.
Turvallisuusohjeet
MultiSlotyksikön voi asentaa ja sitä voivat käyttää
kaikki henkilöt tämän käyttöohjeen ohjeiden
mukaisesti. Jos törmäätte ongelmiin
seuratessanne käsikirjassa kuvattuja
toimintaohjeita, suosittelemme huoltopalvelumme
puoleen kääntymistä.
On ehdottoman tärkeää seurata
tarkkaan käsikirjassa kuvattuja
toimintaohjeita. Laiminlyönti saattaa
aiheuttaa henkilölle vaaratilanteen, laite
voi vaurioitua ja rakentajan takuu
peruuntua. Kaikki korjaus-ja
huoltotoimet on suoritettava oman
henkilökuntamme kautta.
Laite mukana tulevasta "asentamista ja käyttöä
käsittelevästä käsikirjasta" löydätte lisätietoja
laitteesta.
51029197EN/BC - Page 1
Presentation
Contents of package ......................................................................................... 2
Storage ............................................................................................................. 2
Recycling of packing materials ......................................................................... 2
Function ............................................................................................................ 3
Overall view ...................................................................................................... 3
Installation
Input voltage settings ........................................................................................ 4
Installation ......................................................................................................... 5
Connection to the UPS ..................................................................................... 6
Operation .............................................................................................................. 7
Special settings
Installation of a second module ........................................................................ 8
UPS COM port ................................................................................................ 10
Troubleshooting
Operating anomalies ....................................................................................... 11
Fuse replacement ........................................................................................... 11
Appendices
Glossary .......................................................................................................... 12
Index ............................................................................................................... 12
Contents
All APC by Schneider Electric products are protected by patents. They implement original technology which is not available to
other competitors of APC by Schneider Electric.
To take evolving standards and technology into account, the technical characteristics contained in this document are not
binding unless confirmed by APC by Schneider Electric.
This document may be reproduced only with the consent of APC by Schneider Electric. Authorised copies must be marked
"APC by Schneider Electric extension module for communication cards installation and user manual n° 5102919700".
Page 2 - 51029197EN/BC
Contents of package
The MultiSlot optional module is made up
of the following components (see figure 1):
◗ the MultiSlot module itself (not equipped
with the optional cards);
◗ one power cord;
◗ one installation and user manual for the
MultiSlot module (this document);
◗ four adhesive support pads;
◗ two M6 screws and two cage nuts;
◗ one spare fuse (500 mA, 250V, delayed).
Storage
If the module is stored prior to installation, it
should remain in the original packing in a dry
place. The storage temperature range is
–40°C to +70°C.
Recycling of packing
materials
Packing materials must be disposed of in
compliance with applicable laws and
regulations.
Presentation
Fig. 1
51029197EN/BC - Page 3
Overall view
Function
MultiSlot is an extension module for up to
four communications cards.
The MultiSlot module may be connected to
a UPS (Uninterruptible Power Supply) in
either of two connection modes:
◗ direct connection to the UPS BUS port;
◗ connection via a U-Talk/Basic acquisition
card.
Using one of the two connection modes, the
MultiSlot module acquires measurements,
status information and alarms from the UPS
and transmits the information to the installed
communications cards.
The communications cards provide the
interface for user access to the information
via a wide range of communications
protocols.
The currently available protocols are:
◗ SNMP 10BaseT;
◗ JBus RS232 or RS485;
◗ U-Talk RS232 (ASCII-type protocol,
property of APC by Schneider Electric);
MultiSlot-module characteristics:
◗ input voltage: 230 or 120V AC;
◗ input current: 150 or 300 mA;
◗ fuse protection: 500 mA, 250V AC,
delayed;
◗ maximum operating temperature: 35°C;
◗ dimensions: 1 U x 19" (44.45 x 482.6 mm);
◗ weight: 2.8 kg.
Key
1 slots for communications cards (4 slots
including 3 protected by a plate),
2 UPS COM (DB9 connector),
3 selector for module number,
4 UPS BUS (RJ45 connector),
5 input voltage selector,
6 socket for connection to AC power,
7 module protection fuse.
Fig. 2: Front and back of the MultiSlot module.
Presentation
2 3 4 5 6 7
UPS
COM UPS
BUS
1
Page 4 - 51029197EN/BC
Installation
Input voltage settings
Before making any connections, check that
the AC power used to supply the MultiSlot
module is compatible with module
characteristics (230V 150 mA 50Hz or 120V
300 mA 60 Hz).
Set the appropriate voltage (230V or 120V)
using the selector 5 (see figure 3).
A 500 mA 250V delayed fuse protects the
module against electrical faults.
The MultiSlot module must be
deenergized (cord removed from
the socket 6 before changing
settings on the selector 5 ).
Once the voltage has been correctly set,
insert the cord in the socket 6 at the back
of the MultiSlot module (see figure 4).
The cord is made up of two active wires and
an earth wire which must be connected to
the installation earthing terminal.
Fig. 3
230V 120V 230V 120V
5
UPS
COM UPS
BUS
6
UPS
COM UPS
BUS
6
230V AC / 50Hz
supply selected
120V AC / 60Hz
supply selected
Fig. 4
51029197EN/BC - Page 5
Installation
Rack mounting
Figure 5 shows how to install the MultiSlot
module in a 19" rack using the two M6
screws and the two cage nuts positioned at
the desired height on the frame uprights.
The module is not as wide as the rack and
consequently does not block the circulation
of air.
If the temperature inside the
cabinet exceeds 35°C, ventilation
is required or the MultiSlot module
must be installed outside the
cabinet.
Fig. 5
Fig. 6
Adhesive support pads
Figure 6 shows how to attach the four
adhesive support pads under the MultiSlot
module to keep it from slipping on a flat
surface.
Page 6 - 51029197EN/BC
Connection to the UPS
Figure 7 shows connection of the MultiSlot
module to a UPS using an acquisition card
intended for a U-Talk/Basic communications
port. Consult the user manual of the card
concerning configuration in the U-Talk or
Basic modes. The cable for connection to
the UPS is supplied with the acquisition
card.
Installation
Fig. 7
U-Talk
UPS
U-Talk
UPS
51029197EN/BC - Page 7
Operation
The communications cards may be installed
in any of the four slots.
No particular order is required.
Figure 9 shows one possible order.
Before a card may be installed, the
protection plate must be removed.
The screws holding the plate are used to
secure the card in the module.
The plates for unused slots must be left in
place.
Consult the installation and user
manuals of the cards prior to their
installation in the MultiSlot
module.
Fig. 8
SNMP
10BT
JBUS
UPS
U-Talk/Basic
Page 8 - 51029197EN/BC
Special settings
Installation of a
second module
Depending on the surveillance needs for the
installation, it may be useful to increase the
number of connection points by installing a
second MultiSlot module.
Figure 10 shows the parameter settings for
each of the two modules.
Installation of a second MultiSlot module is
possible only for UPSs equipped with a U-
Talk or Basic communications port. Setting for unit
MultiSlot 2
Setting for unit
MultiSlot 1
3
OFF
18
ON
OFF
18
ON
UPS
COM UPS
BUS
Fig. 9
51029197EN/BC - Page 9
Figure 11 shows how to connect the two
MultiSlot modules to the UPS.
Only one acquisition card should be used for
the set of two modules.
The two modules are interconnected via the
UPS BUS ports 4 .
Fig. 10
Special settings
UPS
U-Talk or Basic
4
4
OUT
UPS
U-Talk/Basic
Page 10 - 51029197EN/BC
Figure 12 shows the wiring diagram for the
RJ45 cable used to interconnect the two
MultiSlot modules or to connect one of the
MultiSlot modules to the UPS BUS port on
the UPS. The cable is not supplied.
UPS COM port
This port is reserved for future applications
of the MultiSlot module and should not be
used.
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
4 twisted
pairs
shielded RJ45
8-wire connector
RJ45 cable
(max. length 5 meters)
RJ45-cable wiring diagram
male RJ45
connector
body body
shielded
cable
shielded RJ45
8-wire connector
male RJ45
connector
Fig. 11
Special settings
51029197EN/BC - Page 11
Troubleshooting
Operating anomalies
AC-power problem
The green lights on the communications
cards and the acquisition card are all off:
◗ check the position of the input voltage
selector (see figure 3),
◗ check that the power cable is properly
connected (see figure 4),
◗ check the fuse and replace it if necessary
(see below "fuse replacement").
Communications problem
The green lights on the communications
cards flash regularly every second for more
than one minute:
◗ check the connection between the
MultiSlot module and the UPS (see figures
7, 8 and 11),
◗ check that the cards are correctly installed
in the MultiSlot module,
◗ press the reset button on each card
installed in the MultiSlot module,
◗ if necessary, deenergize and reenergize
the MultiSlot module.
Fuse replacement
The MultiSlot module is protected by a fuse.
If the fuse blows, it must be replaced, as
shown in figure 13.
The replacement fuse must imperatively
have the same characteristics as the original
fuse (500 mA, 250V, delayed).
A replacement fuse is supplied with the
MultiSlot module.
If the problem continues, contact our
after-sales support department.
Card start-up problem
The green light on a communications card
remains on or off:
◗ check that the card is correctly installed in
the MultiSlot module,
◗ press the reset button of the faulty card.
Invalid installation
configurations
The following installation configurations are
invalid:
◗ MultiSlot module not connected to a UPS
(no U-Talk/Basic acquisition card or no
direct connection via the UPS BUS port),
◗ MultiSlot module equipped with two U-
Talk/Basic acquisition cards,
◗ installation in duo mode (two modules)
with an acquisition card in each MultiSlot
module,
◗ MultiSlot module equipped with both a U-
Talk/Basic acquisition card and a connection
to a UPS via the UPS BUS port.
7
Fig. 12
Page 12 - 51029197EN/BC
Appendices
Index
AC power ............................................................................................................................. 4, 11
Acquisition card .............................................................................................................. 6, 9, 11
Acquisition cable .................................................................................................................. 6, 9
Adhesive support pads ........................................................................................................ 2, 5
Characteristics .......................................................................................................................... 3
Communications card ........................................................................................................ 7, 11
Contents of package ................................................................................................................. 2
Fuse .................................................................................................................................. 2, 4, 11
I2C RJ45 cable ................................................................................................................. 6, 9, 10
Power cord ............................................................................................................................ 2, 4
Protection plates ................................................................................................................... 2, 7
Rack ....................................................................................................................................... 2, 5
Second MultiSlot module ...................................................................................................... 8-9
Settings .................................................................................................................................. 4, 8
Troubleshooting ...................................................................................................................... 11
UPS (connection) ............................................................................................................ 6, 9, 11
Warnings ( )............................................................................................................... i, 4-5, 7
Glossary
Basic: information exchange protocol using
dry contacts,
I2C: multi-point and multi-master
communications protocol and bus,
JBus: master-slave communications
protocol using a point-to-point (RS232) or
multi-point (RS485) serial link,
SNMP: Ethernet communications protocol,
UPS: Uninterruptible Power Supply,
U-Talk: point-to-point ASCII
communications protocol using an RS232
serial link. U-Talk is the APC by Schneider
Electric proprietary protocol.