APC AP8702S-NAX590 User Manual
Displayed below is the user manual for AP8702S-NAX590 by APC which is a product in the Power Cables category. This manual has pages.
Related Manuals
Product
End-of-Life
Instructions
Power Cords
Product End-of-Life Instructions – EoLI
ENVEOLI1511004_V1 Published by: Schneider E lectric Dec-2015
Product overview
Product Range: Power cords
Marketing Model/Name: AP987X(YY)-(ZZZ), AP988X(YY)-(ZZZ), AP989X(YY)-(ZZZ), AP97XX(YY)-
(ZZZ), and DELLXX, where X is a number, while YY and ZZZ represent product options such as color, region or
cus tomer designations.
Size: H x L x D in mm = 38 x76 x 203
Weight in g = between 260 g and 3,065 g including packaging. It is 353.71 g for the AP9870 Power Cord,
C13 to C14, 2.5m product.
Purpose
The product family must be disp osed according to the legislation of the country. This document is intended for use
by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life
treatment for the components and materials of the product.
Note:
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE). This product range may be managed at end of life independently or with another product, such
as an uninterruptible power supply (UPS), that is als o subject to the WEEE directive.
Operations recommended for the end of life treatment
There are several steps to process the products at the end of life so as to recover components, materials or
energy :
Reuse Separation for special treament Other dismantling Shredding
CAUTION: The components of the products that optimi ze the recy cling performances
are listed, identified and located hereunder.
Disassembly Instructions:
1. It is recommended to ship the power cords to recyclers as whole units for further processing.
Product End-of-Life Instructions – EoLI
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
RCS Nanterre 954 503 439
Capital social 896 313 776 €
www.schneide
r
-electric.com
The components of the products that optimize the recycling performances are listed,
identified and located hereunder.
Power Cord product range consists of the following typical parts: (1) Wire, (2) Plugs, (3) wire wrap, and
(4) copper conductors.
Recommendation Number on
drawing Components Weight
(in g) Comment
Special treatment (2), (3) Plugs and Wire wrap,
made with PVC 2160 and
160 each
Antimony Oxide Flame
Retarded PVC with lead-
free (SAC305) soldering.
EoLI achi eved wit h Schneider-Elec tric TT03 V5 procedure
© 2011 - Schneider Electric – All rights reserved