APC PDX332IEC-960 User Manual
Displayed below is the user manual for PDX332IEC-960 by APC which is a product in the Power Cables category. This manual has pages.
Related Manuals
InfraStruXure Power Distribution Module Cable Extender
Installation Instructions
Overview
The InfraStruXure Power Distribution Module (PDM) cable extender provides additional cable
length to the PDM. It is available in various lengths, ratings and connector types in order to reach
equipment in racks or enclosures that may have been moved further away from the PDM than their
original installation. APC offers the cable extender in lengths of 1.2 meters (3.9 feet) to 9.7 meters
(31.8 feet) in 0.6-meter (2-foot) increments. Each extender terminates on one end with an IEC 309
plug and on the other end with an IEC 309 receptacle.
Warning: Use the cable extender only with a 400 V InfraStruXure power
distribution system. Do not use it with any other applications.
How to install the PDM power cable
Note: You do not have to power down the PDM to attach the cable extender to an existing
PDM power cable.
Connect the receptacle of the PDM power cable to the cable extender plug.
Plug (IEC 309 type shown)
Receptacle (IEC 309
type shown)
PDM power cable
Cable extender
receptacle
plug
*990-2456B-001*
Run the receptacle end of the attached cable extender through a cable trough to the rack or
enclosure with the equipment to which you wish to feed power.
At the rack or enclosure, connect the plug of the equipment to the receptacle of the cable
extender. The following illustration provides an overview of the cable extender connections. If
possible, move the plug and receptacle into the equipment rack to provide more room in the
cable trough.
PDM power cable
PDM cable extender
Cable from inside the rack or enclosure
PDM cable extender
InfraStruXure system—top view
990-2456B-001 10/2007
Entire contents copyright 2007 American Power Conversion Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited. APC, the APC logo, and
InfraStruXure are trademarks of American Power Conversion Corporation. All other trademarks,
product names, and corporate names are the property of their respective owners and are used for
informational purposes only.