APC SBP20KRMI4U User Manual
Displayed below is the user manual for SBP20KRMI4U by APC which is a product in the Power Supply Units category. This manual has pages.
Related Manuals
Installation and
Operation
Service Bypass Panel
SBP20KP
SBP20KRMT4U
SBP20KRMI4U
suo0707a
This manual and the safety guide are available in English on the enclosed CD and the APC Web site, www.apc.com.
Uživatelská příručka a bezpečnostní pokyny jsou k dispozici v češtině na přiloženém CD a na webových stránkách APC -
www.apc.com.
Denne vejledning og sikkerhedsvejledningen er tilgængelige på dansk på den vedlagte CD og på APC's websted, www.apc.com.
Dieses Handbuch sowie die Sicherheitsrichtlinien sind in deutscher Sprache auf der beiliegenden CD und auf der Website von
APC unter www.apc.com verfügbar.
Este manual y la guía de seguridad están disponibles en español en el CD adjunto y en el sitio Web de APC, www.apc.com.
Ce manuel et le guide de sécurité sont disponibles en français sur le CD-ROM ci-inclus et sur le site Web d'APC, www.apc.com.
A használati utasítás és a biztonsági útmutató megtalálható magyarul a csatolt CD-n és az APC honlapján: www.apc.com.
Il presente manuale e la corrispondente Guida per la sicurezza sono disponibili in italiano sul CD-ROM allegato e sul sito Web
di APC all'indirizzo www.apc.com.
Deze handleiding en het veiligheidshandboek staan in het Nederlands op de bijgevoegde cd en op de APC-website:
www.apc.com.
En norsk versjon av denne håndboken og sikkerhetsveiledningen finnes på den vedlagte CD-en og på APCs webområde
www.apc.com.
Este manual e o guia de segurança estão disponíveis em português no CD incluso e no website da APC, www.apc.com.
Instrukcja obsługi oraz przewodnik bezpieczeństwa w języku polskim dostępne są na załączonej płycie CD i na stronie
internetowej APC, www.apc.com.
Denna manual och säkerhetsguide finns tillgänglig på svenska på medföljande CD och på APC:s webbsida, www.apc.com.
Bu kılavuzun ve güvenlik kılavuzunun Türkçe versiyonu ürünle birlikte verilen CD’de ve www.apc.com adresindeki APC web
sitesinde bulunmaktadır.
Panduan dan petunjuk keselamatan ini tersedia dalam Bahasa Inggris pada CD terlampir dan pada Situs APC, www.apc.com.
本書及び安全ガイドの日本語版は、同梱の CD 及び APC の Web サイト（www.apc.com）からご覧戴けます。
이 매뉴얼과 안전 가이드는 동봉된 CD 와 APC 웹사이트 www.apc.com 에서 한글로 이용할 수 있습니다 .
Англоязычный вариант данного руководства и руководства по технике безопасности имеется на прилагаемом
компакт-диске, а также на сайте компании APC: www.apc.com.
คําแนะนําดานความปลอดภัยและคูมือนี้ที่เปนภาษาไทย สามารถดูไดในซีดีที่ใหมาและเว็บไซตของ APC, www.apc.com
您可以從隨附的 CD 與 APC 網站 （www.apc.com）上獲得本手冊與安全指南的中文版本¡£
Το εγχειρίδιο αυτό και ο οδηγός ασφάλειας είναι διαθέσιμα στα ελληνικά στο CD που εσωκλείεται και στην ιστοσελίδα της
APC, www.apc.com.
SBP20K Series User Manual 1
Overview
The APC® by Schneider Electr ic service bypass panel (SBP) , pr ovides util ity power to connected
equipment during UPS maintenanc e.
Inventory
Read the Safety Guide before installing the UPS.
Inspect the SBP upon receipt. Notify the carrie r and dealer if ther e is damage.
The package is recyc lable; save it for reuse or dispose of it prope rly.
Literature Kit:
• Product docum entation
• Safety Guide
• Warranty card
• Allen wre n ch (1)
Rail Kit Installation Kit
Installa tion Kit Contents
(8) (8) (8) (2)
(1 pair) (1 pair) (1 pair) (1 pa ir)
SBP20K Seri es User Manual2
Specifications
Electrical Specifications
Note: The table above represents the electrical ratings of the SBP and not those of the UPS.
UPS wire specifications may vary. The SBP requires a m inimum wire size of 25 m m 2 and a
maximum wire size of 50 mm2. Refer to the UPS user manual for UPS wiring speci ficati ons.
SBP ratings must be equal to or greater than those of the UPS to which it is connected.
The input circuit breaker should not exceed the rat ing recommended on the UPS.
The system load must not exceed the electrical rating of the UPS. For example, if a 3840 VA
SBP is used with a 3000 VA UPS the maximum load that the system will support is 3000 VA.
Environmental Specifications
Changes and modifications to this unit not express ly approved by APC could
void the warranty.
SBP model Rated Input Voltage Rated Output Voltage Input Curre nt
maximum
Output Power
Watts/VA
maximum
SBP20KP
200/208/240 VAC
50/60 H z , 2P +P E 200/208/240 VAC
50/60 Hz, 2P+PE 125 A
each phase 30,000
220/230/240 VAC
50/60 Hz 1P+N+ P E 220/230/240 VAC
50/60 Hz, 1P+N+PE 125 A
each phase 30,000
380/400/415 VAC
50/60 Hz, 3P+N+PE 220/230/240 VAC
50/60 Hz, 1P+N+PE 125 A
each phase 30,000
SBP20KRMT4U 200/ 208/240 VAC
50/60 H z , 2P +P E 200/208/240 VAC
50/60 Hz, 2P+PE 125 A
each phase 30,000
SBP20KRMI4U
220/230/240 VAC
50/60 Hz, 1P+N+PE 220/230/240 VAC
50/60 Hz, 1P+N+PE 125 A
each phase 30,000
380/400/415 VAC
50/60 Hz, 3P+N+PE 220/230/240 VAC
50/60 Hz, 1P+N+PE 125 A
each phase 30,000
Temperature Operating 0° to 40° C (32° to 104° F ) This unit is intend ed for indoor use only.
Do no t operate the servic e bypass panel where
there is excessive dust or the temperature or
h u midity are outside sp ecified li mits .
B e sure the air v en ts on the SBP ar e n o t
blocked. Allow adequat e spac e for proper
ventilation.
Storage -15° to 45° C (-40° to 1 13° F)
Maximum
Elevation Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity 0 to 95% relative hum idity, non-condensing
SBP20K Series User Manual 3
Front panel
Rear panels
Callout Description
Equipm ent outlet s
Equipment outl et circuit breakers
Utility input power hardwire acces s
Output power hardwire acce ss
SBP20KRMI4U SBP20KRMT4U
SBP20KP
Test
Test
Normal Bypass
Normal
Load protected
Load not pr otec ted
Load not protected
AC Input
by Schneider Electric
UPS
suo
0641a
suo0687a
suo0686a
suo0688a
SBP20K Seri es User Manual4
Installation
Stack configuration
Rack-mo unt configurat ion
Always place the SBP above the external battery packs and the UPS.
Four ornamental screws (sup plied), must be used to secure each tie
bracke t to the units, (see diagra m).
Install rails in rack
Fo r de tails on ra i l in s t al latio n ref er to th e in s tr u c tion s inclu d ed in the r ai l kit .
Insta l l rack -m ount br ac ke ts
Secur e the br acke ts to the unit usi ng eig ht
flat head screws (supp lie d).
Install cleats
Secure the cleats to th e unit using eight
Pan head screws (suppli ed).
Install in rack
Always place the SBP above the external
battery packs and the UPS.
A cage nut and an ornamental scre w
(supplied), must be used in the top hole
of each r ack-mount brac k et when
sec u r ing the unit in the rack.
The bottom hole of each rack-mount
bracket must be sec ured using an
ornamental screw (su pplied) , in the
threa d ed h o le.
suo0689a
4x
4x
suo0690a
4x
4x
suo0696a
4x
4x
suo0691a
4x
7 holes
7 holes
SBP20K Series User Manual 5
Wall-mount configuration
Secure the wall-mount brackets to the unit using eigh t
ornamental screws (supplied), four in ea ch bracket.
Secure the SBP to the wall. Select screws (not supplied),
that are appropriate for the weight of the u nit and the
mount ing surface materi al.
suo0697a
4x
4x
SBP20K Seri es User Manual6
Hardwire the SBP
Hardwiring must be performed by a qualified electrician.
Adhere to all national and local electrical codes.
Switch the utility circuit breaker off.
Remove the terminal block access panel located on top
of the unit.
On all models, remove the access panel with three
knockout pieces.
Remov e al l three knockout pieces from the panel.
Model SBP20KP has two access panels. Remove both
of the access panels.
Remov e al l three knockout pieces from the small pan el.
Remov e one of the knockout pi ec es from the la rge panel.
S trip 24 mm (1 inch), of insulati on from the c able ends.
Inse rt cables through the holes in the ac cess panel(s) .
Conn ec t the ground te rminal first.
Install an approp ria te strai n relie f (not s upplied ), on eac h
cable.
Secure the cables i n th e terminal blocks. Refer to th e
term inal block configurations on the following page.
Use the Allen wrench supplied to tighten the te rminal
block scre ws.
Torqu e terminals to 6 Nm (53 in-lb ) minimum,
8 Nm (71 in-lb) maximum.
Rep l ace th e acce s s p an el ( s) usi n g al l of the s crew s
remov ed in the previous steps. Failure to do so may
resu lt in personal inj ury or equipment damage.
suo0702a
x7
suo0703a
x6
suo0704a
x6
24 m m
(1 inch)
suo0705a
A
ll Models
suo070
6a
SBP20KP
SBP20K Series User Manual 7
Hardwire the UPS
Refer to the UPS user manual for detailed instructions.
SBP20KRMI4U SBP20KRMT4U
SBP20KP
L2/N L1
N
L3 L2
L1
NL3 L2 L1
L2/N
L1
L2/N
L1
L2/N L1
L2/N L1
L2/N L1
N
L3 L2
L1
NL3
L2 L1
SBP20K Seri es User Manual8
Operation
Normal mode
While the SBP operates in normal mode, power is supplied to connect ed equipment from the UPS
providing protection from power variat ions and disturbances .
Test mode
1. S w it ch th e U P S to Bypass mode. Verify that no UPS fault conditions exist. In the event that a fault
condition exists, ref er to th e u ser manuals for the UPS an d SBP.
2. Switch the SBP to Test mode.
Note: While t he SBP is in Test mode connected e qui pment rec eives direct utility p ower a nd is
not protected by the UPS.
The UPS will continue to receive input utility power.
The Equipment Protection Policy is not valid while the SBP i s opera ting in Test mode.
Bypass mode
Bypass mode enables connected equipment to operate on utility power while UPS maintenance is
performed.
While in SBP Bypass mode the UPS will not receive utility input power. The UPS wil l rec eive batter y
power while in SBP Bypass m ode. Refer to the UPS use r manual for shutdown procedures.
Note: Connected equipment is not protected by the UPS while the SBP is in Bypass mode.
The Equipment Protection Policy is not valid while the SBP i s opera ting in Bypass mode.
Reconnect SBP to UPS
Bypass mode
1. Put the SBP in Bypass mode.
2. Correct ly configure the input, out put and batte r y connections on the UPS.
DO NOT turn on the UPS at this time.
Test mode
1. S w it ch th e S B P to Test mode.
a.T he connected equipm ent will receive dir ect input uti lity power.
b.T he UPS wil l rec eive input utility power.
2. Verify t hat no UPS faul t condit ion s exist. In the event tha t a fault conditi on exi sts, re fer to the use r manuals
for the UPS and SBP.
3. Turn on the UPS output power.
Normal mode
1. Switch the UPS to Bypass mode. Verify that no UPS fault cond itions exist. In the event that a fault
condition exists, ref er to th e u ser manuals for the UPS an d SBP.
2. S w it ch th e S B P to Normal mode.
3. S w it ch th e U P S to Online mode. Verify th at no UPS fault conditions exist. In the event that a fault
condition exists, ref er to th e u ser manuals for the UPS an d SBP.
The SBP will now supply powe r to con nected equipm ent from the UPS pr oviding pr otection f rom power
variations and disturbances.
SBP20K Series User Manual 9
Troubleshooting
Use the table to solve minor installation and operation pr oblems.
Refer to the APC Web site , www.apc.com for assistance with c omplex pr oblems.
Co n tac t i n fo r m a t io n
Customer support for this or any other APC product is available at no charge in any of the following ways:
Visit the APC Web site to access documents in the AP C Knowledge Base and to submit customer support
requests.
–www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific countries, each of which provides custom er support
information.
–www.apc.com/support/
Global support searching APC Knowledge Base and using e-support.
• Contact the APC Customer Support Center by telephone (888) 272 2782, or by e-mail.
Local, cou ntry-specif ic center s: go to www.apc.com/support/contact for contact information.For
information on how to obtain local customer support , co ntact the APC representa tive or other
distributors f rom whom you purchased your APC product.
Problem and/or Possible Cause Solution
UPS will not turn on
SBP is in Bypass mode. Rot ate th e SB P sw it ch to TEST.
There is no power at the UPS input. Verify that the powe r ca bles from the SBP to the u tility power, and from
the SBP to the UPS input are se curel y connected.
UPS is faulty or damag ed. Rotate the SBP switch to Test. If the connected equ ipment is en ergized,
the UPS may be fau lty. Refer to T r oubl eshooting in t he UP S user man ual
for detailed in f o r m atio n.
There is no p o w er at the ut ility power outlet. Ro tate th e SBP switc h to Test. If the connec ted equipm ent does not
become energized, the util ity power outlet may be faulty. Verify th e
util it y power suppl y. Contac t a qua lif ied el ectri ci an to c heck t he building
electr i cal pow er.
UPS is Online; not providing power to connected equipment
SBP output circuit bre aker has tripped. Disconnect all nonesse ntial equipment from the SBP. Reset the SBP
circuit breaker.
There is no SBP output power. Verify that the powe r cable from the SBP to the UPS output is secure ly
connected.
SBP20K Seri es User Manual10
Service
If the unit requires service, do not return it to the dealer. Follow these steps:
1. Review the Troubleshooting section of the ma n u al to eliminate com mon pr o b lems.
2. If the problem persists, contact APC Customer Support through the APC Web site, www.apc.com.
a.Not e the model number and se rial number a nd the date of purc hase . The model and seri al numbers are
located on the rea r panel of the unit a nd are available through the LCD display on select models.
b.Call APC Customer Support an d a te chnician will attempt to solve the problem over the phone. If this
is not possible, the te chnician will issue a Retu r n ed Mate ria l A uthorization Number (RMA#).
c.If the uni t is unde r warran ty, the repairs are free.
d.Service procedures and re turns may vary internationally. Refer to the APC Web sit e for c ountry
sp ec if i c in s t r u ct io n s .
3. Pack the unit in its original packaging. If this is not available, refer to www.apc.com to obtain a new set.
a.Pack the unit properly to avoid damage in transit. Never us e foam beads for packaging. Damage
sustained in transit is not covered under warra nty.
b.F or the UPS, always DISCONNECT THE BATTERY befor e shipping in compliance with U.S.
Departm ent of Transp ortation (DOT) and IATA regulations . T h e b attery may r emain in the unit.
c.Internal ba tteries may re main connected in t he XLBP during shipment, (if applicable, not all units
have XLBP s).
4. W r ite the RMA# provided by Customer Support on the outs ide of the package.
5. Return the unit by insured, pre-paid carrier to the addres s provided by Customer Support.
Transport the unit
1. Shut down and discon nec t all con nected equipment.
2. Discon nec t the unit from utility power.
3. Disconnect all internal and external b atteries (if applicable).
4. Follow the shipping instructions outlined in the Service section of this manual.
Two-Year Factory Warranty
This warranty applies only to the products you purcha s e for your use in accordance with this manual.
Terms of warranty
APC warrants its products to be free from defects in materials and wor kmanship for a pe riod of two
years from the date of purcha se. APC will repair or replace defective products covered by this warran ty.
This warranty does not apply to equipment that has been damaged by accident, ne gligence or
misapplication or has been alter ed or modified in any way. Repair or replacement of a defect ive product
or part ther eof does not exte nd the original wa rrant y peri od. Any pa rts f urnished un der t his war ranty may
be new or factory-remanufactured.
Non-transferable warranty
This warranty ex tends only to the origi nal purcha ser who must have properly r egister ed the product . The
product may be registered at the APC Web site , www.apc.com.
SBP20K Series User Manual 11
Exclusions
APC shall not be liable under the warranty if its testing a nd examination disclose tha t the alleged defect
in the product does not exist or was caused by end user’s or any third person’s mis use, negligence,
improper installation or testing. Further, APC shall not be liable under the warra nty for unauthoriz ed
attempts to repair or modify wron g or inadequate electr ical volta ge or connecti on, inappropria te on-site
operation conditions, corrosive atmosphere, repair, in stallation, exposure to the elements, Acts of God,
fire, theft, or instal lation contr ary to APC re commendati ons or specific ations or in any event if the APC
serial number has bee n altered, defaced, or removed, or any other c ause beyond th e range of the intend ed
use.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR
OTHERWISE, OF PRODUCTS SOLD, SERVICED OR FURNISHED UNDER THIS
AGREEMENT OR IN CONNECTION HEREWITH. APC DISCLAIMS ALL IMPLIED
WARRANT IES OF MERCHANTABILITY, SATISFACTION AND FITNESS FOR A
PAR TICULAR PURPOSE. APC EXPRESS WARRANTIES WILL NOT BE ENLARGED,
DIMINISHED, OR AFFECTED BY AND NO OBLIGATION OR LIABILITY WILL ARISE
OUT OF, APC RENDERING OF TECHNICAL OR OTHER ADVICE OR SERVICE IN
CONNECTION WITH THE PRODUCTS. THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND
REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE APC’S SOLE
LIABILITY AND PURCHASER’S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH
WARRANTIES. APC WARRANTIES EXTEND ONLY TO PURCHASER AND ARE NOT
EXTENDED TO ANY THIRD PARTIES.
IN NO EVENT SHALL APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES
BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, ARISING OUT OF THE USE, SERVICE OR INSTALLATION, OF THE
PRODUCTS, WHETHER SUCH DAMAGES ARISE IN CONTRACT OR TORT,
IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR WHETHER APC
HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.
SPECIFICALLY, APC IS NOT LIABLE FOR ANY COSTS, SUCH AS LOST PROFITS OR
REVENUE, LOSS OF EQUIPMENT, LOSS OF USE OF EQUIPMENT, LOSS OF SOFTWARE,
LOSS OF DATA, COSTS OF SUBSTITUENTS, CLAIMS BY THIRD PARTIES, OR
OTHERWISE.
NO SALESMAN, EMPLOYEE OR AGENT OF APC IS AUTHORIZED TO ADD TO OR VARY
THE TERMS OF THIS WARRANTY. WARRANTY TERMS MAY BE MODIFI ED, IF AT ALL,
ONLY IN WRITING SIGNED BY AN APC OFFICER AND LEGAL DEPARTMENT.
Warr an ty clai m s
Customers with warranty claim s issues may access the APC custo mer support network thr ough the
Support page of the APC Web site, www.apc.com/support. Sele ct your country from the country
selection pull-down menu at the top of the Web page. Sele ct the Support tab to obtain c ontact
information for custom er support in your region.
© 2010 APC by Schneide r Elect ric. APC, the APC logo, and Smart-UPS are owned by Sc hneider Elect ric Industries S.A. S.,
American Power Conversion Cor p oration, or thei r affiliated compani es. All oth er tra dema rks are proper ty of their respecti ve
owners.