Table of Contents
- About this manual
- Chapter 1: Hardware Setup
- Chapter 2: Using your Notebook PC
- Chapter 3: Working with Windows® 8
- Chapter 4: ASUS apps
- Chapter 5: Power-on Self Test (POST)
- Chapter 6: Module Slot Features
- Tips and FAQs
- Appendices
- Overview
- Network Compatibility Declaration
- Non-Voice Equipment
- Federal Communications Commission Interference Statement
- FCC Radio Frequency (RF) Exposure Caution Statement
- Declaration of Conformity (R&TTE directive 1999/5/EC)
- CE Marking
- IC Radiation Exposure Statement for Canada
- Déclaration d’Industrie Canada relative à l’exposition aux ondes radio
- Wireless Operation Channel for Different Domains
- France Restricted Wireless Frequency Bands
- UL Safety Notices
- Power Safety Requirement
- TV Notices
- REACH
- Macrovision Corporation Product Notice
- Prevention of Hearing Loss
- Nordic Lithium Cautions (for lithium-ion batteries)
- Optical Drive Safety Information
- CTR 21 Approval (for Notebook PC with built-in Modem)
- ENERGY STAR complied product
- European Union Eco-label
- Global Environmental Regulation Compliance and Declaration
- ASUS Recycling/Takeback Services
- Regional notice for Singapore
- Overview
ASUS B551LG-CR020G User Manual
Displayed below is the user manual for B551LG-CR020G by ASUS which is a product in the Notebooks category. This manual has pages.
Related Manuals
Notebook PC
E-Manual
First Edition
December 2013
E8781
2
Notebook PC E-Manual
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES
OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION
OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL
USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE
CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY
ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND
SOFTWARE DESCRIBED IN IT.
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages
resulted from omission or failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or
infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers,
and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS
AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING
LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR
POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at http://support.asus.com
Notebook PC E-Manual
3
Table of Contents
About this manual .....................................................................................................7
Conventions used in this manual ............................................................................. 9
Icons .................................................................................................................................... 9
Typography ....................................................................................................................... 9
Safety precautions.....................................................................................................10
Using your Notebook PC ..............................................................................................10
Caring for your Notebook PC ..................................................................................... 11
Proper disposal ................................................................................................................ 12
Chapter 1: Hardware Setup
Getting to know your Notebook PC ...................................................................14
Top View ............................................................................................................................. 14
Bottom ................................................................................................................................ 18
Right Side ..........................................................................................................................21
Left Side .............................................................................................................................23
Front Side ..........................................................................................................................26
Chapter 2: Using your Notebook PC
Getting started ...........................................................................................................30
Install the battery pack. ................................................................................................30
Charge your Notebook PC. .......................................................................................... 32
Lift to open the display panel. .................................................................................... 34
Press the power button. ............................................................................................... 34
Gestures for the touchpad .....................................................................................35
Moving the pointer ........................................................................................................35
Using ASUS Smart Gesture .....................................................................................40
Enabling the rotate gesture ........................................................................................40
Enabling the three-finger gestures .......................................................................... 42
Using the rotate and three-finger gestures .......................................................... 44
4
Notebook PC E-Manual
Using the keyboard ...................................................................................................45
Function keys ................................................................................................................... 45
Function keys for ASUS App ....................................................................................... 46
Windows® 8 keys ............................................................................................................ 46
Numeric keypad .............................................................................................................47
Using the optical drive .............................................................................................48
Chapter 3: Working with Windows® 8
Starting for the first time .........................................................................................52
Windows® 8 lock screen ...........................................................................................52
Windows® UI ................................................................................................................53
Start screen ....................................................................................................................... 53
Windows® Apps .............................................................................................................. 53
Hotspots ............................................................................................................................. 54
Working with Windows® apps ...............................................................................57
Launching apps ............................................................................................................... 57
Customizing apps ........................................................................................................... 57
Accessing the Apps screen ..........................................................................................59
Charms bar ........................................................................................................................61
Snap feature ..................................................................................................................... 63
Other keyboard shortcuts ......................................................................................65
Connecting to wireless networks ........................................................................67
Wi-Fi ..................................................................................................................................... 67
Bluetooth ..........................................................................................................................69
Airplane mode ................................................................................................................. 71
Connecting to wired networks .............................................................................72
Configuring a dynamic IP/PPPoE network connection ....................................72
Configuring a static IP network connection ......................................................... 74
Turning your Notebook PC off ..............................................................................75
Putting your Notebook PC to sleep ......................................................................... 75
Notebook PC E-Manual
5
Chapter 4: ASUS apps
Featured ASUS Apps .................................................................................................78
Power4Gear Hybrid ........................................................................................................ 78
USB Charger+ ................................................................................................................... 82
Trusted Platform Module (TPM)* .............................................................................. 84
ASUS FingerPrint ............................................................................................................. 86
ASUSPRO Business Center* ......................................................................................... 94
Chapter 5: Power-on Self Test (POST)
The Power-on Self Test (POST) ..............................................................................100
Using POST to access BIOS and Troubleshoot......................................................100
BIOS ................................................................................................................................100
Accessing BIOS ................................................................................................................ 100
BIOS Settings ....................................................................................................................101
Troubleshoot ...............................................................................................................111
Refresh your PC ............................................................................................................... 111
Reset your PC ................................................................................................................... 112
Advanced options .......................................................................................................... 113
Chapter 6: Module Slot Features
Using the module slot ..............................................................................................116
Installing a removable optical disc drive ...........................................................117
Installing a secondary battery pack ....................................................................121
Installing a hard disk drive (HDD) or solid state drive (SSD) module ......125
Tips and FAQs
Useful tips for your Notebook PC ........................................................................134
Hardware FAQs ...........................................................................................................135
Software FAQs .............................................................................................................138
6
Notebook PC E-Manual
Appendices
Overview ............................................................................................................................ 142
Network Compatibility Declaration ......................................................................... 142
Non-Voice Equipment .................................................................................................. 142
Federal Communications Commission Interference Statement ................... 144
FCC Radio Frequency (RF) Exposure Caution Statement ................................. 145
Declaration of Conformity (R&TTE directive 1999/5/EC) .................................. 146
CE Marking ........................................................................................................................ 146
IC Radiation Exposure Statement for Canada ...................................................... 147
Déclaration d’Industrie Canada relative à l’exposition aux ondes radio ... 148
Wireless Operation Channel for Different Domains ........................................... 149
France Restricted Wireless Frequency Bands ....................................................... 149
UL Safety Notices ............................................................................................................ 151
Power Safety Requirement.......................................................................................... 152
TV Notices .........................................................................................................................152
REACH ................................................................................................................................. 152
Macrovision Corporation Product Notice .............................................................. 152
Prevention of Hearing Loss ......................................................................................... 152
Nordic Lithium Cautions (for lithium-ion batteries) ........................................... 153
Optical Drive Safety Information .............................................................................. 154
CTR 21 Approval (for Notebook PC with built-in Modem) ..............................155
ENERGY STAR complied product ..............................................................................157
European Union Eco-label ........................................................................................... 157
Global Environmental Regulation Compliance and Declaration .................. 158
ASUS Recycling/Takeback Services .......................................................................... 158
Regional notice for Singapore ................................................................................... 158
Notebook PC E-Manual
7
About this manual
This manual provides information about the hardware and software
features of your Notebook PC, organized through the following
chapters:
Chapter 1: Hardware Setup
This chapter details the hardware components of your Notebook
PC.
Chapter 2: Using your Notebook PC
This chapter shows you how to use the dierent parts of your
Notebook PC.
Chapter 3: Working with Windows® 8
This chapter provides an overview of using Windows® 8 in your
Notebook PC.
Chapter 4: ASUS Apps
This chapter features selected ASUS apps included with your
Notebook PC’s Windows® 8 operating system.
8
Notebook PC E-Manual
Chapter 5: Power-on Self-test (POST)
This chapter shows you how to use POST to change the settings
of your Notebook PC.
Chapter 6: Module Slot Features
This chapter guides you through the process of installing
compatible drives into the module slot of your Notebook PC.
Tips and FAQs
This section presents some recommended tips, hardware FAQs,
and software FAQs you can refer to for maintaining and xing
common issues with your Notebook PC.
Appendices
This section includes notices and safety statements for your
Notebook PC.
Notebook PC E-Manual
9
Conventions used in this manual
To highlight key information in this manual, some text are presented as
follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that can
help complete tasks.
WARNING! This message contains important information that must be
followed to keep you safe while performing tasks and prevent damage to
your Notebook PC's data and components.
Icons
The icons below indicate the devices you can use for completing a
series of tasks or procedures on your Notebook PC.
= Use the touchpad.
= Use the keyboard.
Typography
Bold = This indicates a menu or an item that must be selected.
Italic = This indicates sections that you can refer to in this manual.
10
Notebook PC E-Manual
Safety precautions
Using your Notebook PC
This Notebook PC should only be used in
environments with ambient temperatures between
5°C (41°F) and 35°C (95°F).
Refer to the rating label on the bottom of your
Notebook PC and ensure that your power adapter
complies with this rating.
Do not leave your Notebook PC on your lap or near
any part of your body to prevent discomfort or
injury from heat exposure.
Do not use damaged power cords, accessories, and
other peripherals with your Notebook PC.
While powered on, ensure that you do not carry or
cover your Notebook PC with any materials that can
reduce air circulation.
Do not place your Notebook PC on uneven or
unstable work surfaces.
You can send your Notebook PC through x-ray
machines (used on items placed on conveyor belts),
but do not expose them to magnetic detectors and
wands.
Contact your airline provider to learn about related
inight services that can be used and restrictions
that must be followed when using your Notebook
PC in-ight.
Notebook PC E-Manual
11
Caring for your Notebook PC
Disconnect the AC power and remove the battery
pack (if applicable) before cleaning your Notebook
PC. Use a clean cellulose sponge or chamois cloth
dampened with a solution of nonabrasive detergent
and a few drops of warm water. Remove any extra
moisture from your Notebook PC using a dry cloth.
Do not use strong solvents such as thinners,
benzene, or other chemicals on or near your
Notebook PC.
Do not place objects on top of your Notebook PC.
Do not expose your Notebook PC to strong
magnetic or electrical elds.
Do not use or expose your Notebook PC near
liquids, rain, or moisture.
Do not expose your Notebook PC to dusty
environments.
Do not use your Notebook PC near gas leaks.
12
Notebook PC E-Manual
Proper disposal
Do not throw your Notebook PC in municipal waste.
This product has been designed to enable proper
reuse of parts and recycling. The symbol of the
crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-
containing button cell battery) should not be
placed in municipal waste. Check local regulations
for disposal of electronic products.
Do not throw the battery in municipal waste. The
symbol of the crossed out wheeled bin indicates
that the battery should not be placed in municipal
waste.
Notebook PC E-Manual
13
Chapter 1:
Hardware Setup
14
Notebook PC E-Manual
Getting to know your Notebook PC
Top View
NOTE: The keyboard's layout may vary per region or country. The top
view may also vary in appearance depending on the Notebook PC model.
Notebook PC E-Manual
15
Microphone
The built-in microphone can be used for video conferencing,
voice narrations, or simple audio recording.
Camera
The built-in camera allows you to take pictures or record videos
using your Notebook PC.
Camera indicator
The camera indicator lights up when the built-in camera is in use.
Display panel
This high-denition display panel provides excellent viewing
features for photos, videos, and other multimedia les on your
Notebook PC.
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating may
occur.
Keyboard
The keyboard provides full-sized QWERTY keys with a
comfortable travel depth for typing. It also enables you to use
the function keys, allows quick access to Windows®, and controls
other multimedia functions.
NOTE: The keyboard layout diers by model or territory.
16
Notebook PC E-Manual
Capital lock indicator
This indicator lights up when the capital lock function is
activated. Using capital lock allows you to type capitalized letters
(such as A, B, C) using your Notebook PC’s keyboard.
Power button
Press the power button to turn your Notebook PC on or o. You
can also use the power button to put your Notebook PC to sleep
or hibernate mode and wake it up from sleep or hibernate mode.
In the event that your Notebook PC becomes unresponsive,
press and hold the power button for about four (4) seconds until
your Notebook PC shuts down.
Numeric keypad
The numeric keypad toggles between these two functions: for
numeric input and as pointer direction keys.
NOTE: For more details, refer to the Numeric keypad section in this
manual.
Notebook PC E-Manual
17
Fingerprint sensor
This built-in ngerprint sensor captures your ngerprint and uses
it as biometric authentication for logging on to your Notebook
PC’s system and other programs inside Windows® 8.
NOTE: For more details, refer to the ASUS Fingerprint section in
this manual.
Touchpad
The touchpad allows the use of multi-gestures to navigate
onscreen, providing an intuitive user experience. It also simulates
the functions of a regular mouse.
NOTE: For more details, refer to the Gestures for the touchpad
section in this manual.
18
Notebook PC E-Manual
Bottom
WARNING!
• The bottom of the Notebook PC can get warm to hot while in use or
while charging the battery pack.
• When working on your Notebook PC, do not place it on surfaces that
can block the vents.
IMPORTANT! Battery time varies by usage and by the specications for
this Notebook PC. The battery pack cannot be disassembled.
NOTE: The bottom side may vary in appearance depending on model.
Notebook PC E-Manual
19
Spring module lock
This spring module lock automatically locks the removable
module in place once it is inserted into the module slot.
IMPORTANT! This lock should be held in an unlocked position
when removing the module.
Module latch
This latch provides an additional lock to keep the removable
module in place. It also automatically locks in place once the
module is inserted into the module slot.
IMPORTANT! This latch should be held in an unlocked position
when removing the module.
Docking station pin slots
Insert the pins on your docking station into these slots to
securely attach it to your Notebook PC.
Docking station hook slots
Align the hooks on your docking station over these slots then
gently insert the hooks to securely attach the docking station to
your Notebook PC.
20
Notebook PC E-Manual
Air vents
The air vents allow cool air to enter and warm air to exit the
Notebook PC.
WARNING! Ensure that paper, books, clothing, cables, or other
objects do not block any of the air vents or else overheating may
occur.
Spring battery lock
The spring battery lock automatically locks the battery pack in
place once it is inserted into the battery slot.
IMPORTANT! This lock should be held in an unlocked position
when removing the battery pack.
Battery pack
The battery pack is automatically charged when your Notebook
PC is connected to a power source. When charged, the battery
pack supplies power to your Notebook PC.
Audio speakers
The built-in audio speaker allows you to hear audio straight from
the Notebook PC. The audio features of this Notebook PC are
software-controlled.
Notebook PC E-Manual
21
Right Side
Headphone output/microphone input combo jack port
This port allows you to connect your Notebook PC to amplied
speakers or headphones. You can also use this port to connect
your Notebook PC to an external microphone.
USB 2.0 port
This USB (Universal Serial Bus) port is compatible with USB 2.0
or USB 1.1 devices such as keyboards, pointing devices, ash
disk drives, external HDDs, speakers, cameras and printers.
Module slot
This slot allows you to attach an optical disc drive, lithium-ion
battery pack, or a compatible 2.5-inch 7mm hard disk drive
(HDD) into your Notebook PC.
NOTE: For more details, refer to Chapter 6: Module Slot Features
in this manual.
22
Notebook PC E-Manual
Optical disc drive module*
Your Notebook PC’s optical disc drive is a removable module
that may support several disc formats such as CDs, DVDs,
recordable discs, or rewritable discs.
NOTE: For more details, refer to the Using the optical drive section
in this manual.
Optical drive indicator*
This indicator lights up when the optical drive electronic eject
button is pressed while the Notebook PC is powered on. This
indicator also lights up when the optical drive is currently
reading data from or writing data to a disc.
Optical disc drive eject button*
Press this button to eject the optical drive tray.
Manual eject hole*
The manual eject hole is used to eject the drive tray in case the
electronic eject button does not work.
WARNING! Use the manual eject hole only when the electronic
eject button does not work.
NOTE: For more details, refer to the Using the optical drive
section in this manual.
Kensington® security slot
The Kensington® security slot allows you to secure your
Notebook PC using Kensington® compatible Notebook PC
security products.
* on selected models only
Notebook PC E-Manual
23
Left Side
Docking station pin guide
Insert the guide pins of your docking station into these pin
guides to securely connect it with your Notebook PC.
LAN LED activity indicator
This LED indicator provides a visual indication of the LAN
activity's status. Refer to the following table for details:
Color Status
Blinking Orange The Notebook PC is currently
connected to a LAN network
and accessing data.
Lights o The Notebook PC is not
connected to a LAN network
LAN LED indicator
This LED indicator lights up when your Notebook PC is
connected to an active LAN port using a network cable.
24
Notebook PC E-Manual
Power (DC) input port
Insert the bundled power adapter into this port to charge the
battery pack and supply power to your Notebook PC.
WARNING! The adapter may become warm to hot while in use.
Do not cover the adapter and keep it away from your body while
it is connected to a power source.
IMPORTANT! Use only the bundled power adapter to charge
the battery pack and supply power to your Notebook PC.
USB 3.0 Power Direct port with USB Charger+
This USB 3.0 (Universal Serial Bus 3.0) port provides a transfer
rate of up to 5 Gbit/s and is backward compatible to USB 2.0.
This port also oers the following features:
• USB Charger+ - The icon indicates this port’s USB
Charger+ feature which allows you to quick-charge
mobile devices.
NOTE: For more details, refer to the USB Charger+ section in this
manual.
• Power Direct - This port allows you to supply higher
power voltage and current to your Notebook PC while it
is connected to a compatible docking station.
Notebook PC E-Manual
25
LAN port
Insert the network cable into this port to connect to a local area
network.
VGA port
This port allows you to connect your Notebook PC to a standard
VGA-compatible device, such as monitors or projectors.
Mini DisplayPort/Thunderbolt port (varies by model)
Use a Thunderbolt adapter to connect your Notebook PC to a
DisplayPort, VGA, DVI, or HDMI external display and experience
high-resolution display features via Intel® Thunderbolt™
technology.
USB 3.0 ports
These Universal Serial Bus 3.0 (USB 3.0) ports provide a transfer
rate of up to 5 Gbit/s and are backward compatible to USB 2.0.
Memory card reader
This Notebook PC comes with a built-in memory card reader
slot that supports MMC and SD card formats.
26
Notebook PC E-Manual
Front Side
Status indicators
The status indicators help identify the current hardware status of
your Notebook PC.
Power indicator
The power indicator lights up when the Notebook PC
is turned on and blinks slowly when the Notebook
PC is in sleep mode.
Two-color battery charge indicator
The two-color LED provides a visual indication of the
battery’s charge status. Refer to the following table
for details:
Notebook PC E-Manual
27
Color Status
Solid Green The Notebook PC is plugged to
a power source and the battery
power is between 95% and
100%.
Solid Orange The Notebook PC is plugged
to a power source, charging its
battery, and the battery power
is less than 95%.
Blinking Orange The Notebook PC is running on
battery mode and the battery
power is less than 10%.
Lights o The Notebook PC is running on
battery mode and the battery
power is between 10% to 100%.
Drive activity indicator
This indicator lights up when your Notebook PC is
accessing the internal storage drives.
Bluetooth / Wireless indicator
This indicator lights up when your Notebook PC’s
wireless function (Bluetooth or Wi-Fi) is enabled.
Memory card reader
This Notebook PC has a built-in memory card reader slot that
supports MMC and SD card formats.
28
Notebook PC E-Manual
Notebook PC E-Manual
29
Chapter 2:
Using your Notebook PC
30
Notebook PC E-Manual
Getting started
NOTE: If your Notebook PC does not have its battery pack installed, use
the following procedures for installation.
Install the battery pack.
A. Align the battery pack’s hooks with their corresponding slots in
the battery compartment.
Notebook PC E-Manual
31
B. Press the battery pack gently into the battery compartment,
aligning the battery pack’s connector with the compartment’s
golden pins.
32
Notebook PC E-Manual
Charge the Notebook PC for 3 hours before using it in
battery mode for the rst time.
NOTE: The power adapter may vary in appearance, depending on models
and your region.
Charge your Notebook PC.
A. Connect the AC power cord to the AC/DC adapter.
B. Plug the AC power adapter into a 100V~240V power source.
C. Connect the DC power connector into your Notebook PC’s power
(DC) input.
IMPORTANT!
Power adapter information:
• Input voltage: 100-240Vac
• Input frequency: 50-60Hz
• Rating output current: 3.42A (65W)
• Rating output voltage: 19V
Notebook PC E-Manual
33
IMPORTANT!
• Locate the input/output rating label on your Notebook PC and
ensure that it matches the input/output rating information on your
power adapter. Some Notebook PC models may have multiple rating
output currents based on the available SKU.
• Ensure that your Notebook PC is connected to the power adapter
before turning it on for the rst time. We strongly recommend that
you use a grounded wall socket while using your Notebook PC on
power adapter mode.
• The socket outlet must be easily accessible and near your Notebook
PC.
• To disconnect your Notebook PC from its main power supply, unplug
your Notebook PC from the power socket.
WARNING!
Read the following precautions for your Notebook PC’s battery.
• The battery used in this device may present a risk of re or chemical
burn if removed or disassembled.
• Follow the warning labels for your personal safety.
• Risk of explosion if battery is replaced by an incorrect type.
• Do not dispose of in re.
• Never attempt to short-circuit your Notebook PC’s battery.
• Never attempt to dissamble and reassemble the battery.
• Discontinue usage if leakage is found.
• The battery and its components must be recycled or disposed of
properly.
• Keep the battery and other small components away from children.
34
Notebook PC E-Manual
Lift to open the display panel.
Press the power button.
Notebook PC E-Manual
35
Moving the pointer
You can tap or click anywhere on the touchpad to activate its pointer,
then slide your nger on the touchpad to move the pointer onscreen.
Slide horizontally
Slide vertically
Slide diagonally
Gestures for the touchpad
Gestures allow you to launch programs and access the settings of your
Notebook PC. Refer to the following illustrations when using hand
gestures on your touchpad.
36
Notebook PC E-Manual
One-nger gestures
Left-click Right-click
• In the Start screen, click an
app to launch it.
• In Desktop mode, double-
click an application to launch
it.
• In the Start screen, click an
app to select it and launch
the settings bar. You can
also press this button to
launch the All Apps bar.
• In Desktop mode, use this
button to open the right-
click menu.
Notebook PC E-Manual
37
Drag and drop
Double-tap an item, then slide the same nger without lifting it o the
touchpad. To drop the item to its new location, lift your nger from the
touchpad.
Tap/Double tap
• In the Start screen, tap an app to launch it.
• In Desktop mode, double-tap an application to launch it.
38
Notebook PC E-Manual
Top edge swipe
• In the Start screen, swipe from the top edge to launch the All
Apps bar.
• In a running app, swipe from the top edge to view its menu.
Left edge swipe Right edge swipe
Swipe from the left edge to shue
your running apps.
Swipe the right edge to launch the
Charm bar.
NOTE: The following edge gestures work only in Windows® 8.
Notebook PC E-Manual
39
Two-nger gestures
Two-nger scroll (up/down) Two-nger scroll (left/right)
Slide two ngers to scroll up or
down.
Slide two ngers to scroll left or
right.
Zoom out Zoom in
Bring together your two ngers on
the touchpad.
Spread apart your two ngers on
the touchpad.
Drag and drop
Select an item then press and hold the left button. Using your other
nger, slide down the touchpad to drag and drop the item to a new
location.
40
Notebook PC E-Manual
Using ASUS Smart Gesture
The ASUS Smart Gesture app of your Notebook PC allows you to enable
other touchpad gestures or disable selected gestures depending on
your preference.
Enabling the rotate gesture
1. From the taskbar on your Desktop, click .
2. Double-click the icon to launch the ASUS Smart Gesture app.
Notebook PC E-Manual
41
4. Click Apply to save the changes then OK to exit the ASUS Smart
Gesture window.
3. In the ASUS Smart Gesture window, tick Rotate
42
Notebook PC E-Manual
Enabling the three-nger gestures
1. From the taskbar on your Desktop, click .
2. Double-click the icon to launch the ASUS Smart Gesture app.
Notebook PC E-Manual
43
4. Click Apply to save the changes then OK to exit the ASUS Smart
Gesture window.
3. In the ASUS Smart Gesture window, tick the gestures you would
like to enable under Three Fingers
44
Notebook PC E-Manual
Rotate Swipe left or swipe right
With one nger steady on the
touchpad, rotate another nger
clockwise or counterclockwise.
Swipe three ngers left or right to
navigate pages.
Swipe up Swipe down
Swipe three ngers upward to
show all running applications.
Swipe three ngers downward to
show the Desktop mode.
Using the rotate and three-nger gestures
Notebook PC E-Manual
45
Function keys
The function keys on your Notebook PC’s keyboard can trigger the
following commands:
Using the keyboard
Puts the Notebook PC into Sleep mode
Turns Airplane mode on or o
NOTE: When enabled, the Airplane mode disables all
wireless connectivity.
Decreases display brightness
Increases display brightness
Turns the display panel o
Activates the second screen
NOTE: Ensure that the second display is connected to
your Notebook PC.
46
Notebook PC E-Manual
Function keys for ASUS App
Your Notebook PC also comes with a special set of function keys that
can be used to launch an ASUS app.
Launches the ASUS Power4Gear Hybrid app
Turns the speaker volume down
Turns the speaker volume up
Enables or disables the touchpad
Turns the speaker on or o
Windows® 8 keys
There are two special Windows® keys on your Notebook PC’s keyboard
used as below:
Press this key to go back to the Start screen. If you are
already in the Start screen, press this key to go back to
the last app you opened.
Press this key to simulate the right-click functions.
Notebook PC E-Manual
47
Numeric keypad
A numeric keypad is available on
selected Notebook PC models. You
can use this keypad for numeric
input or as pointer direction keys.
Press
to
toggle between using
the keypad as number
keys or as pointer
direction keys.
48
Notebook PC E-Manual
Using the optical drive
NOTE:
• The actual location of the electronic eject button may vary
depending on your Notebook PC model.
• The actual appearance of the Notebook PC optical drive may also
vary depending on model but usage procedures remaing the same.
Inserting an optical disc
1. While the Notebook PC is on, press the electronic eject button to
partially eject the optical drive tray.
Notebook PC E-Manual
49
2. Gently pull out the drive tray.
IMPORTANT! Be careful not to touch the optical drive lens. Ensure that
there are no objects that may get jammed under the drive tray.
3. Hold the disc by the edge, with its printed side up, then gently
place it inside the hub.
4. Push down the disc’s plastic hub until it snaps onto the optical
drive hub.
50
Notebook PC E-Manual
5. Push the drive tray gently to close the optical drive.
NOTE: While data is being read, it is normal to hear some spinning and
vibrating in the optical drive.
Manual eject hole
The manual eject hole is located on the optical drive door and is used to
eject the optical drive tray in case the electronic eject button does not
work.
To manually eject the optical drive tray, insert a straightened paper clip
into the manual eject hole until the drive tray opens.
WARNING! Use the manual eject hole only when the electronic eject
button does not work.
Notebook PC E-Manual
51
Chapter 3:
Working with Windows® 8
52
Notebook PC E-Manual
Starting for the rst time
When you start your computer for the rst time, a series of screens
appear to guide you in conguring your Windows® 8 operating system.
To start your Notebook PC for the rst time:
1. Press the power button on your Notebook PC. Wait for a few
minutes until the setup screen appears.
2. From the setup screen, pick a language to use on your Notebook
PC.
3. Carefully read the License Terms. Tick I accept the terms for
using Windows then click Accept.
4. Follow the onscreen instructions to congure the following basic
items:
• Keep your PC secure
• Personalize
• Wireless
• Settings
• Sign in to your PC
5. After conguring the basic items, the Windows®8 tutorial appears.
Watch this to learn more about Windows®8 functionalities.
Windows® 8 lock screen
The Windows® 8 lock screen may appear when your Notebook PC enters
the Windows® 8 operating system. To proceed, tap on the lock screen or
press any key on your Notebook PC's keyboard.
Notebook PC E-Manual
53
Windows® UI
Windows® 8 comes with a tile-based user interface (UI) which allows
you to organize and easily access Windows® apps from the Start screen.
It also includes the following features that you can use while working
on your Notebook PC.
Start screen
The Start screen appears after successfully signing in to your user
account. It helps organize all the applications you need in just one
place.
Zoom in/out button
Windows® Apps
These are apps pinned on the Start screen and displayed on tiled-format
for easy access.
NOTE: Some apps require signing in to your Microsoft account before
they are fully launched.
54
Notebook PC E-Manual
Hotspots
Onscreen hotspots allow you to launch programs and access the
settings of your Notebook PC. The functions in these hotspots can be
activated using the touchpad.
Hotspots on a running app
Hotspots on the Start screen
Notebook PC E-Manual
55
Hotspot Action
upper left corner Hover your mouse pointer on the upper left
corner then tap on the recent app’s thumbnail
to revert back to that running app.
If you launched more than one app, slide
down to show all running apps.
lower left corner From a running app screen:
Hover your mouse pointer on the lower
left corner then tap on the Start screen’s
thumbnail to go back to the Start screen.
NOTE: You can also press the Windows key
on your keyboard to go back to the
Start screen.
From the Start screen:
Hover your mouse pointer on the lower
left corner then tap on the running app’s
thumbnail to go back to that app.
56
Notebook PC E-Manual
Hotspot Action
top side Hover your mouse pointer on the top side
until it changes to a hand icon. Drag then
drop the app to a new location.
NOTE: This hotspot function only works on
a running app or when you want to use the
Snap feature. For more details, refer to the
Snap feature under Working with Windows®
apps.
upper or lower right
corner
Hover your mouse pointer on the upper or
lower right corner to launch the Charms bar.
Notebook PC E-Manual
57
Working with Windows® apps
Use your Notebook PC’s touchpad or keyboard to launch, customize,
and close apps.
Launching apps
Moving apps
Customizing apps
You can move, resize, unpin, or close apps from the Start screen using
the following steps:
Position your mouse pointer over the app then left-click
or tap once to launch it.
Press twice then use the arrow keys to browse
through the apps. Press to launch an app.
Double-tap on the app then drag and drop the app to a
new location.
58
Notebook PC E-Manual
Right-click on the app to activate its settings bar then
tap or .
Right-click on the app to activate the settings bar then
tap .
Unpinning apps
Resizing apps
1. Move your mouse pointer on the top side of the
launched app then wait for the pointer to change
to a hand icon.
2. Drag then drop the app to the bottom of the
screen to close it.
From the running app’s screen, press .
Closing apps
Notebook PC E-Manual
59
Accessing the Apps screen
Aside from the apps already pinned on your Start screen, you can also
open other applications through the Apps screen.
Horizontal scroll bar
60
Notebook PC E-Manual
Launching the Apps screen
Launch the Apps screen using your Notebook PC's touchpad or
keyboard.
Swipe from the top edge to launch the All Apps bar.
From the Start screen, press to select the
All Apps icon then press .
Pinning more apps on the Start screen
You can pin more apps on the Start screen using your touchpad.
1. Position the mouse pointer over the app you want
to pin on the Start screen.
2. Right-click on the app to activate its settings.
3. Tap on the icon.
Notebook PC E-Manual
61
Charms bar
The charms bar is a toolbar that can be triggered on the right side
of your screen. It consists of several charms that allow you to share
applications and provide quick access for customizing the settings of
your Notebook PC.
Charms bar
Launching the Charms bar
NOTE: When called out, the Charms bar initially appears as a set of
white icons. The image above shows how the Charms bar looks like once
activated.
Use your Notebook PC’s touchpad or keyboard to launch the charms
bar.
Move your mouse pointer on the upper or lower right
corner of the screen.
Press .
62
Notebook PC E-Manual
Search
This charm allows you to look for les, applications, or
programs in your Notebook PC.
Share
This charm allows you to share applications via social
networking sites or email.
Start
This charm reverts the display back to the Start screen.
From the Start screen, you can also use this to revert back
to a recently opened app.
Devices
This charm allows you to access and share les with the
devices attached to your Notebook PC such as an external
display or printer.
Settings
This charm allows you to access the PC settings of your
Notebook PC.
Inside the Charms bar
Notebook PC E-Manual
63
Snap feature
The Snap feature displays two apps side-by-side, allowing you to work
or switch between apps.
IMPORTANT! Ensure that your Notebook PC’s screen resolution is set to
1366 x 768 pixels or higher before using the Snap feature.
Snap bar
64
Notebook PC E-Manual
Using Snap
Use your Notebook PC’s touchpad or keyboard to activate and use Snap.
1. Launch the app you wish to snap.
2. Hover the mouse point on the top side of your
screen.
3. Once the pointer changes to a hand icon, drag
then drop the app to the left or right side of the
display panel.
4. Launch another app.
1. Launch the app you wish to snap.
2. Press .
3. Launch another app.
4. To switch between apps, press .
Notebook PC E-Manual
65
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help
you launch applications and navigate Windows® 8.
\
Switches between the Start screen and the last
running app
Launches the desktop
Launches the Computer window on Desktop
mode
Opens the File charm
Opens the Share charm
Opens the Settings charm
Opens the Devices charm
Activates the Lock screen
Minimizes the currently active window
66
Notebook PC E-Manual
Opens the Second screen pane
Opens the Apps search pane
Opens the Run window
Opens Ease of Access Center
Opens the Settings charm
Opens a menu box of Windows® tools
Launches the magnier icon and zooms in
your screen
Zooms out your screen
Notebook PC E-Manual
67
Connecting to wireless networks
Wi-Fi
Access emails, surf the Internet, and share applications via social
networking sites using your Notebook PC’s Wi-Fi connection.
IMPORTANT! The Airplane mode disables this feature. Ensure that
Airplane mode is turned o before enabling the Wi-Fi connection of your
Notebook PC.
Enabling Wi-Fi
Activate Wi-Fi in your Notebook PC using the following steps on your
touchpad.
1. Launch the Charms bar.
2. Tap and tap .
3. Select an access point from the list of available Wi-Fi connections.
68
Notebook PC E-Manual
4. Tap Connect to start the network connection.
NOTE: You may be prompted to enter a security key to activate the Wi-Fi
connection.
5. If you want to enable sharing between your Notebook PC and
other wireless-enabled systems, tap Yes, turn on sharing and
connect to devices. Tap No, don't turn on sharing or connect
to devices if you do not want to enable the sharing function.
Notebook PC E-Manual
69
Bluetooth
Use Bluetooth to facilitate wireless data transfers with other Bluetooth-
enabled devices.
IMPORTANT! The Airplane mode disables this feature. Ensure that
Airplane mode is turned o before enabling the Bluetooth connection of
your Notebook PC.
Pairing with other Bluetooth-enabled devices
You need to pair your Notebook PC with other Bluetooth-enabled
devices to enable data transfers. To do this, use your touchpad as
follows:
1. Launch the Charms bar.
2. Tap then tap Change PC Settings.
3. Under PC Settings, select Devices then tap Add a Device to
search for Bluetooth-enabled devices.
70
Notebook PC E-Manual
4. Select a device from the list. Compare the passcode on your
Notebook PC with the passcode sent to your chosen device. If
they are the same, tap Yes to successfully pair your Notebook PC
with the device.
NOTE: For some bluetooth-enabled devices, you may be prompted to
key in the passcode of your Notebook PC.
Notebook PC E-Manual
71
Airplane mode
The Airplane mode disables wireless communication, allowing you to
use your Notebook PC safely while in-ight.
Turning Airplane mode on
Turning Airplane mode o
NOTE: Contact your airline provider to learn about related inight services
that can be used and restrictions that must be followed when using your
Notebook PC in-ight.
1. Launch the Charms bar.
2. Tap and tap .
3. Move the slider to the left to turn the Airplane
mode o.
Press .
1. Launch the Charms bar.
2. Tap and tap .
3. Move the slider to the right to turn the Airplane
mode on.
Press .
72
Notebook PC E-Manual
Connecting to wired networks
You can also connect to wired networks, such as local area networks
and broadband Internet connection, using your Notebook PC’s LAN
port.
NOTE: Contact your Internet Service Provider (ISP) for details or
your network administrator for assistance in setting up your Internet
connection.
To congure your settings, refer to the following procedures.
IMPORTANT! Ensure that a network cable is connected between your
Notebook PC’s LAN port and a local area network before performing the
following actions.
Conguring a dynamic IP/PPPoE network
connection
1. LaunchLaunch Desktop.
2. From the Windows® taskbar, right-click the network
icon then tap Open Network and Sharing
Center.
3. In the Network and Sharing Center window, tap
Change adapter settings.
4. Right-click on your LAN then select Properties.
Notebook PC E-Manual
73
5. Tap Internet Protocol Version 4(TCP/IPv4) then
tap Properties.
NOTE: Proceed to the next steps if you are using PPPoE connection.
6. Tap Obtain an IP address automatically then tap
OK.
7. Return to the Network and Sharing Center
window then tap Set up a new connection or
network.
8. Select Connect to the Internet then tap Next.
9. Tap Broadband (PPPoE).
10. Type your User name, Password, and Connection
name then tap Connect.
11. Tap Close to nish the conguration.
12. Tap on the taskbar then tap the connection
you just created.
13. Type your user name and password then tap
Connect to start connecting to the Internet.
74
Notebook PC E-Manual
Conguring a static IP network connection
1. Repeat steps 1 to 5 under Conguring a dynamic
IP/PPPoE network connection.
2 Tap Use the following IP address.
3. Type the IP address, Subnet mask and Default
gateway from your service provider.
4. If needed, you can also type the preferred DNS
server address and alternate DNS server address
then tap OK.
Notebook PC E-Manual
75
Turning your Notebook PC off
You can turn o your Notebook PC by doing either of the following
procedures:
Putting your Notebook PC to sleep
To put your Notebook PC on Sleep mode, press the power button once.
• Tap from the Charms bar then tap
> Shut down to do a normal shutdown.
• From the log-in screen, tap > Shut
down.
• You can also shut down your Notebook PC using
Desktop mode. To do this, launch the desktop
then press alt + f4 to launch the Shut Down
window. Select Shut Down from the drop-down
list then select OK.
• If your Notebook PC is unresponsive, press
and hold the power button for at least four (4)
seconds until your Notebook PC turns o.
You can also put your Notebook PC to sleep mode using
Desktop mode. To do this, launch the desktop then press
alt + f4 to launch the Shut Down window. Select Sleep
from the drop-down list then select OK.
76
Notebook PC E-Manual
Notebook PC E-Manual
77
Chapter 4:
ASUS apps
78
Notebook PC E-Manual
Featured ASUS Apps
Power4Gear Hybrid
Optimize the performance of your Notebook PC using the power saving
modes in Power4Gear.
NOTE: Unplugging the Notebook PC from its power adapter automatically
switches Power4Gear Hybrid to Battery Saving mode.
Launching Power4Gear Hybrid
Press .
Running System
This option allows you to enable either of the following power saving
modes in your Notebook PC.
NOTE: By default, your Notebook PC is set to Performance mode.
Performance mode
Use this mode when doing high-performance activities like playing
games or conducting business presentations using your Notebook PC.
Battery Saving mode
This mode extends your Notebook PC’s battery life while plugged in to
the power adapter or while running on battery power only.
Notebook PC E-Manual
79
Select from these power saving modes.
Use these options to customize your
power saving mode.
This option allows you to hide
the desktop icons and turns the
presentation mode on or o.
80
Notebook PC E-Manual
System in Sleep
This option allows you to enable or disable either of the following sleep
modes:
Instant On
This mode is default-enabled in your Notebook PC. It allows the system
to return to its last working state even after your Notebook PC has
entered into sleep mode.
Move this slider to switch between
Instant On or Long Standby Time.
Notebook PC E-Manual
81
Long Standby Time
This mode allows your Notebook PC’s battery to last for up to sixty-nine
(69) days or more. When enabled, the Notebook PC returns to its last
working state in as fast as seven seconds, four hours after entering into
deep sleep mode.
82
Notebook PC E-Manual
USB Charger+
USB Charger+ allows you to quick-charge devices using your Notebook
PC’s USB 3.0 charge port with the icon.
WARNING: If your connected device overheats, remove it immediately.
Setting the quick-charge limit
By default, your Notebook PC can support quick-charging via the USB
Charger+ port while on power adapter mode.
Using the USB Charger+ settings, you can set a quick-charge limit so
you can continue quick-charging devices using the same port even
while your Notebook PC is running on battery mode or turned o.
NOTE: Some Notebook PC models support quick-charging even while on
sleep, hibernate, or shut down mode, depending on SKU.
1. From the taskbar on your Desktop, click .
2. Right-click on the icon then click Settings.
Notebook PC E-Manual
83
3. Move the percentage slider to the left or to the
right to set the limit for charging devices.
NOTE: The default limit is set to 40% but you can set
the quick-charge limit from 20% to 99%.
4. Click OK to save and exit.
84
Notebook PC E-Manual
Trusted Platform Module (TPM)*
The TPM, or Trusted Platform Module, is a security hardware device on the
system board that will hold computer-generated keys for encryption. It is a
hardware-based solution that can help avoid attacks by hackers looking to
capture passwords and encryption keys for sensitive data.
The security features provided by the TPM are internally supported by
the following cryptographic capabilities of each TPM:
• hashing
• random number generation
• asymmetric key generation
• asymmetric encryption/decryption
Each individual TPM on each individual computer system has a unique
signature initialized during the silicon manufacturing process that
further enhances its trust or security eectiveness. Each individual TPM
must have an Owner before it is useful as a security device.
TPM Applications
TPM is useful for any customer that is interested in providing an addition
layer of security to the computer system. The TPM, when bundled with
an optional security software package, can provide overall system
security, le protection capabilities and protect against email/privacy
concerns.
TPM helps provide security that can be stronger than that contained in
the system BIOS, operating system, or any non-TPM application.
NOTE: The TPM is disabled byb default. Use BIOS to enable this feature.
* on selected models only
Notebook PC E-Manual
85
Enabling TPM Support
Restart your Notebook PC then press during POST. Set TPM
Support to [Enable] in BIOS setup Advanced > Trusted Computing.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Conguration
Security Device Support [Enabled]
TPM State [Enabled]
Pending operation [None]
Current TPM Status Information
TPM Enabled Status:
TPM Active Status:
TPM Owner Status:
Enables or disables
TPM Support. O.S.
will not show TPM.
Reset of platform
is required.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
TPM Support
Disabled
Enabled
IMPORTANT! Use your TPM application’s “Backup” or “Migration” function
to backup your TPM security data.
86
Notebook PC E-Manual
ASUS FingerPrint
Capture ngerprint biometrics on your Notebook PC’s ngerprint sensor
using the ASUS FingerPrint app. This app allows you to use ngerprint
biometrics as user-authenticated access into your Notebook PC’s system
and applications.
Using this app, you can enable the following features:
• Swipe your nger over the ngerprint sensor to log on from
boot up straight into the Windows® operating system without
manually keying in passwords.
• Set up the boot key as backup access for your ngerprint
biometrics.
• Import or back up other ngerprint biometrics you would like to
use to log on to your Notebook PC and its system programs.
Using the ASUS FingerPrint app
Create your ngerprint biometrics using the following steps:
1. From the Windows® 8 Start Screen, go to All Apps then click on
the ASUS FingerPrint icon from the list of applications under
ASUS.
Notebook PC E-Manual
87
2. Click OK to proceed to the next step.
3. Key in your user account password then click OK.
88
Notebook PC E-Manual
4. Click the on the nger illustration that corresponds to the
same nger you would like to use as your ngerprint biometric
data.
Notebook PC E-Manual
89
5. Swipe your designated nger twice on the ngerprint sensor to
create your ngerprint biometric data.
6. 1 and 2 changes to blue to indicate that the ngerprint was
successfully captured. Click Next to proceed.
90
Notebook PC E-Manual
7. Create your boot key password in the next window to serve as
backup access for your ngerprint biometric data.
Notebook PC E-Manual
91
8. Click Enable to activate using your current ngerprint biometric
data for system log on.
9. The ASUS FingerPrint settings window appears next. You
may either close this window or change the settings of your
ngerprint biometric data.
NOTE: For more information on conguring your ngerprint biometric
settings, refer to the ASUS FingerPrint Settings section in this manual.
92
Notebook PC E-Manual
ASUS FingerPrint settings
Congure your boot key settings and ngerprint biometrics using the
basic and advanced options of the ASUS FingerPrint settings.
Accessing the ASUS FingerPrint settings
The ASUS FingerPrint settings window appears right after
creating your rst ngerprint biometric data. Later on, you may
also access this window by launching the ASUS FingerPrint app
from the Start Screen.
Basic
The Basic settings of ASUS FingerPrint allows you to congure
your current ngerprint biometrics, add more ngerprint
biometrics, and change the details of your boot key. It also shows
the current status of your Notebook PC’s ngerprint sensor.
Notebook PC E-Manual
93
Advanced
The Advanced settings of ASUS FingerPrint allows you to setup
lock options when the wrong password or ngerprint is detected,
back up and import your account information, and delete
ngerprint or boot key records from your system.
94
Notebook PC E-Manual
ASUSPRO Business Center*
The ASUSPRO Business Center is an application hub that features some
exclusive ASUS apps and the Intel® Small Business Advantage (SBA)
to improve manageability when using your Notebook PC for business
productivity.
Accessing ASUS Business Center
Go to Desktop mode then click on the icon.
menu options
Click on any of these icons to launch the application.
* on selected models only
Notebook PC E-Manual
95
ASUSPRO Business Center menu options
Login/Logout - This option allows you to login or logout from ASUSPRO
Business Center using your ASUSPRO Business Center password.
Home - This option allows you to return to the ASUSPRO Business
Center home page.
Alert Center - This option allows you to view the list of alerts sent to
your Notebook PC.
Settings - This option allows you to congure your password settings,
send email settings, and export/import settings.
Update - This option allows you to check on available updates for
ASUSPRO Business Center.
About - This option features some important details about the
ASUSPRO Business Center such as the copyright date and the app’s
version number.
Contact - This option shows you links you can use to contact ASUS
regarding the application.
Help - This option gives you a detailed information about the Intel®
Small Business Advantage (SBA) and its applications.
96
Notebook PC E-Manual
ASUSPRO Business Center apps
Intel® Wireless Display
This application allows you to stream business presentations,
multimedia les, and even websites from your Notebook PC to an
external display device using an adapter.
NOTE: For details on using the Intel® Wireless Display, click Help inside
the Intel® WiDi window.
Health Center
This application allows you to schedule maintenance tasks that help
maintain system performance. It also allows you to receive email
notications whenever your Notebook PC receives alerts as balloon
messages or as sent to its Windows® system tray.
Software Monitor
This application allows you to monitor other security-related system
applications so you can receive alerts when they stop running.
Notebook PC E-Manual
97
USB Blocker
This application allows you to restrict which USB devices are permitted
to access your Notebook PC. Using this app, you can prevent
unauthorized Notebook PC access from these USB device categories:
audio/video, entertainment, storage, oce, and others.
ASUS Power4Gear
This application launches ASUS Power4Gear. For more details, refer to
the ASUS Power4Gear section in this manual.
Data Backup and Restore
This application allows you to automatically backup your specied data
based from a predened schedule. This backup process automatically
runs in the background even while you are using your Notebook PC.
98
Notebook PC E-Manual
Notebook PC E-Manual
99
Chapter 5:
Power-on Self Test (POST)
100
Notebook PC E-Manual
The Power-on Self Test (POST)
The Power-on Self Test (POST) is a series of software-controlled
diagnostic tests that run when you turn on or restart your Notebook PC.
The software that controls the POST is installed as a permanent part of
the Notebook PC’s architecture.
Using POST to access BIOS and Troubleshoot
During POST, you can access the BIOS settings or run troubleshooting
options using the function keys of your Notebook PC. You may refer to
the following information for more details.
BIOS
The Basic Input and Output System (BIOS) stores system hardware
settings that are needed for system startup in the Notebook PC.
The default BIOS settings apply to most conditions of your Notebook
PC. Do not change the default BIOS settings except in the following
circumstances:
• An error message appears onscreen during system bootup and
requests you to run the BIOS Setup.
• You have installed a new system component that requires further
BIOS settings or updates.
WARNING: Using inappropriate BIOS settings may result to system
instability or boot failure. We strongly recommend that you change the
BIOS settings only with the help of a trained service personnel.
Accessing BIOS
Restart your Notebook PC then press during POST.
Notebook PC E-Manual
101
BIOS Settings
NOTE: The BIOS screens in this section are for reference only. The actual
screens may dier by model and territory.
Boot
This menu allows you to set your boot option priorities. You may refer to
the following procedures when setting your boot priority.
1. On the Boot screen, select Boot Option #1.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Boot Conguration
Fast Boot [Enabled]
Launch CSM [Disabled]
Boot Option Priorities
Boot Option #1 [Windows Boot Manager]
Boot Option #2 [UEFI: Generic Storage]
Boot Option #3 [Generic STORAGE DEV..]
Hard Drive BBS Priorities
Add New Boot Option
Delete Boot Option
Sets the system
boot order
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
102
Notebook PC E-Manual
2. Press and select a device as the Boot Option #1.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Sets the system
boot order
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Boot Conguration
Fast Boot [Enabled]
Launch CSM [Disabled]
Boot Option Priorities
Boot Option #1 [Windows Boot Manager]
Boot Option #2 [UEFI: Generic Storage]
Boot Option #3 [Generic STORAGE DEV..]
Hard Drive BBS Priorities
Add New Boot Option
Delete Boot Option
Boot Option #1
Windows Boot Manager
Disabled
Notebook PC E-Manual
103
Security
This menu allows you to set up the administrator and user password
of your Notebook PC. It also allows you to control the access to your
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB
interface.
NOTE:
• If you install a User Password, you will be prompted to input this
before entering your Notebook PC's operating system.
• If you install an Administrator Password, you will be prompted to
input this before entering BIOS.
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup. If ONLY
the user’s password is set, then this is a
power on password and must be entered to boot
or enter Setup. In Setup, the User will have
Administrator rights.
Administrator Password Status NOT INSTALLED
User Password Status NOT INSTALLED
Administrator Password
User Password
HDD Password Status : NOT INSTALLED
Set Master Password
Set User Password
I/O Interface Security
System Mode state User
Secure Boot state Enabled
Secure Boot Control [Enabled]
Key Management
Set Administrator
Password. The
password length
must be in the
following range:
Minimum length 3
Maximum length 20
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
104
Notebook PC E-Manual
To set the password:
1. On the Security screen, select Administrator Password or User
Password.
2. Type in a password then press .
3. Re-type to conrm the password then press .
To clear the password:
1. On the Security screen, select Administrator Password or User
Password.
2. Type in the current password then press .
3. Leave the Create New Password eld blank then press
.
4. Select Yes in the conrmation box then press .
Notebook PC E-Manual
105
I/O Interface Security
In the Security menu, you can access I/O Interface Security to lock
or unlock some interface functions of your Notebook PC.
I/O Interface Security
LAN Network Interface [UnLock]
Wireless Network Interface [UnLock]
HD AUDIO Interface [UnLock]
USB Interface Security
If Locked, LAN
controller will
be disabled.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Security
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized
Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
LAN Network Interface
Lock
UnLock
To lock an interface:
1. On the Security screen, select I/O Interface Security.
2. Select an interface you would like to lock then press
.
3. Select Lock.
106
Notebook PC E-Manual
USB Interface Security
Through the I/O Interface Security menu, you can also access USB
Interface Security to lock or unlock ports and devices.
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
USB Interface Security
USB Interface [UnLock]
External Ports [UnLock]
Card Reader [UnLock]
If Locked, all
USB device will
be disabled
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Security
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized
Defaults
F10 : Save & Exit
ESC : Exit
USB Interface
Lock
UnLock
To lock the USB interface:
1. On the Security screen, select I/O Interface Security > USB
Interface Security.
2. Select an interface that you would like to lock then select
Lock.
NOTE: Setting the USB Interface to Lock also locks and hides the
External Ports and other devices included under USB Interface Security.
Notebook PC E-Manual
107
Set Master Password
In the Security menu, you can use Set Master Password to set up
a password-enabled access to your hard disk drive.
To set the HDD password:
1. On the Security screen, select Set Master Password.
2. Type in a password then press .
3. Re-type to conrm the password then press .
4. Select Set User Password then repeat the previous steps to
set up the user password.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Set HDD Master
Password.
***Advisable to
Power Cycle System
after Setting Hard
Disk Passwords***
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized
Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Password Description
If ONLY the Administrator’s password is
set,then this only limits access to Setup
and is only asked for when entering Setup.
If ONLY the user’s password is set, then
this is a power on password and must be
entered to boot or enter Setup. In Setup,
the User will have Administrator rights.
Administrator Password Status NOT INSTALLED
User Password Status NOT INSTALLED
Administrator Password
User Password
HDD Password Status : NOT INSTALLED
Set Master Password
Set User Password
I/O Interface Security
System Mode state Setup
Secure Boot state Disabled
Secure Boot Control [Enabled]
Key Management
108
Notebook PC E-Manual
Save & Exit
To keep your conguration settings, select Save Changes and Exit
before exiting the BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
Save Changes and Exit
Discard Changes and Exit
Save Options
Save Changes
Discard Changes
Restore Defaults
Boot Override
Windows Boot Manager
Launch EFI Shell from lesystem device
Exit system setup
after saving the
changes.
Notebook PC E-Manual
109
To update the BIOS:
1. Verify the Notebook PC’s exact model then download the latest
BIOS le for your model from the ASUS website.
2. Save a copy of the downloaded BIOS le to a ash disk drive.
3. Connect your ash disk drive to your Notebook PC.
4. Restart your Notebook PC then press during POST.
5. From the BIOS menu, Select Advanced > Start Easy Flash, then
press .
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Start Easy Flash
Internal Pointing Device [Enabled]
Wake on Lid Open [Enabled]
Power Off Energy Saving [Enabled]
SATA Conguration
Graphics Conguration
Intel (R) Anti-Theft Technology Corporation
USB Conguration
Network Stack
Press Enter to run
the utility to
select and update
BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
110
Notebook PC E-Manual
FSO
FS1
FS2
FS3
FS4
0 EFI
<DIR>
ASUSTek Easy Flash Utility
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute
Current BIOS
Platform: B551
Version: 101
Build Date: Oct 26 2012
Build Time: 11:51:05
New BIOS
Platform: Unknown
Version: Unknown
Build Date: Unknown
Build Time: Unknown
FLASH TYPE: MXIC 25L Series
6. Locate your downloaded BIOS le in the ash disk drive then
press .
7. After the BIOS update process, select Exit > Restore Defaults to
restore the system to its default settings.
Notebook PC E-Manual
111
Troubleshoot
By pressing during POST, you can access Windows® 8 troubleshoot
options which includes the following:
• Refresh your PC
• Reset your PC
• Advanced options
Refresh your PC
Use Refresh your PC if you want to refresh your system without losing
your current les and applications.
To access this during POST:
1. Restart your Notebook PC then press during
POST.
2. Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
3. Tap Refresh your PC.
4. In the Refresh your PC screen, read the bullet points
to learn more about using this option then tap
Next.
5. Tap the account you would like to refresh.
6. Type your account password then tap Continue.
7. Tap Refresh.
IMPORTANT! Ensure that your Notebook PC is plugged in
to a power source before refreshing your system.
112
Notebook PC E-Manual
Reset your PC
IMPORTANT! Back up all your data before performing this option.
Use Reset your PC to restore your Notebook PC to its default settings.
To access this during POST:
1. Restart your Notebook PC then press during
POST.
2. Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
3. Tap Reset your PC.
4. In the Reset your PC screen, read the bullet points
to learn more about using this option then tap
Next.
5. Tap your preferred reset option: Just remove my
les or Fully clean the drive.
6. Tap Reset.
IMPORTANT! Ensure that your Notebook PC is plugged in
to a power source before resetting your system.
Notebook PC E-Manual
113
Advanced options
Use Advanced options to perform additional troubleshooting options
in your Notebook PC.
To access this during POST:
1. Restart your Notebook PC then press during
POST.
2. Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
3. Tap Advanced options.
4. In the Advanced options screen, select the
troubleshooting option you wish to perform.
5. Follow the succeeding steps to complete the
process.
Using System Image Recovery
Under Advanced options, you can use System Image Recovery to
recover your system using your Notebook PC’s original image le.
To access this during POST:
1. Restart your Notebook PC then press during
POST.
2. Wait for Windows® to load the Choose an option
screen then tap Troubleshoot.
3. Tap Advanced options.
114
Notebook PC E-Manual
4. In the Advanced options screen, select System
Image Recovery.
5. Choose an account you would like to recover using
a system image le.
6. Type your account password then tap Continue.
7. Select Use the latest available system image
(recommended), then tap Next. You can also
choose Select a system image if your system
image is in an external device or DVD.
8. Follow the succeeding steps to complete the
system image recovery procedure.
NOTE: We strongly recommend that you regularly backup
your system to prevent data loss in case your Notebook
PC stops working.
Notebook PC E-Manual
115
Chapter 6:
Module Slot Features
116
Notebook PC E-Manual
Using the module slot
Your Notebook PC comes with a module slot that allows you to install
any of the following upgrades: an optical disc drive, a 2.5-inch 7mm.
hard disk drive (HDD)/solid state drive (SSD), or a secondary lithium-ion
battery pack.
The following steps show you how to install these removable items into
the module slot of your Notebook PC.
IMPORTANT! Visit an authorized service center or retailer for information
on available module upgrades for your Notebook PC. Purchase modules
from authorized retailers of this Notebook PC to ensure maximum
compatibility and reliability.
NOTE: The appearance of your Notebook PC’s bottom side and module
may vary per model but the installation process remains the same.
Notebook PC E-Manual
117
Installing a removable optical disc
drive
WARNING! Do not disassemble any components from your removable
optical disc drive. Consult an authorized service center or retailer if you
encounter any problems with this module.
NOTE: The removable optical disc drive is bundled with select models
only. Visit an authorized service center or retailer to purchase compatible
removable disc drives for your Notebook PC.
1. Shut down your Notebook PC and disconnect all cables and other
peripherals.
2. Put your Notebook PC on a at, clean and stable surface with its
bottom side facing up.
118
Notebook PC E-Manual
3. Loosen the screw that secures the module as shown in the
illustration below.
4. Slide and hold the spring module lock (A) then push the module
latch (B) towards the direction of the arrows to release the current
module from the slot.
Notebook PC E-Manual
119
5. Gently pull out the current module from the slot.
6. Orient and insert the optical disc drive module into the module
slot then gently push all the way until the spring module lock and
module latch clicks into place.
120
Notebook PC E-Manual
7. Secure the optical disc drive module using the screw you
removed earlier.
Notebook PC E-Manual
121
1. Shut down your Notebook PC and disconnect all cables and other
peripherals.
2. Put your Notebook PC on a at, clean and stable surface with its
bottom side facing up.
Installing a secondary battery pack
WARNING! Do not disassemble any components from your battery pack.
Consult an authorized service center or retailer if you encounter any
problem with this module.
NOTE: The secondary battery pack is an optional accessory for your
Notebook PC. Visit an authorized service center or retailer to purchase
compatible removable battery packs for your Notebook PC.
122
Notebook PC E-Manual
3. Loosen the screw that secures the module as shown in the
illustration below.
4. Slide and hold the spring module lock (A) then push the module
latch (B) towards the direction of the arrows to release the current
module from the slot.
Notebook PC E-Manual
123
5. Gently pull out the current module from the slot.
6. Orient and insert the secondary battery pack into the module
slot then gently push all the way until the spring module lock and
module latch clicks into place.
124
Notebook PC E-Manual
7. Secure the secondary battery pack using the screw you removed
earlier.
Notebook PC E-Manual
125
Installing a hard disk drive (HDD)
or solid state drive (SSD) module
Upgrade the memory capacity of your Notebook PC by installing an
additional 2.5-inch 7mm. HDD or SSD module. The following steps show
you how to install or replace the removable HDD/SSD module of your
Notebook PC.
WARNING! Do not disassemble any components from your HDD or SSD.
Consult an authorized service center or retailer if you encounter any
problems with your drive.
IMPORTANT! Purchase an HDD or SSD from authorized retailers of this
Notebook PC to ensure maximum compatibility and reliability. You may
also visit an authorized service center for further assistance.
NOTE: The appearance of your Notebook PC’s bottom side may vary per
model but the installation process remains the same.
126
Notebook PC E-Manual
1. Shut down your Notebook PC and disconnect all cables and other
peripherals.
2. Put your Notebook PC on a at, clean and stable surface with its
bottom side facing up.
Notebook PC E-Manual
127
3. Loosen the screw that secures the module as shown in the
illustration below.
4. Slide and hold the spring module lock (A) then push the module
latch (B) towards the direction of the arrows to release the current
module from the slot.
128
Notebook PC E-Manual
5. Gently pull out the current module from the slot.
NOTE: If your purchased HDD or SSD comes with its own module bay,
refer to its user manual for installation details. The following procedures
applies only to ASUS module bays for this Notebook PC.
6. Turn the module bay to its other side then unlock the module
bay’s bracket. If your module bay contains an existing HDD or
SSD, proceed to step 7. Otherwise, you may proceed to step 8.
bracket
Notebook PC E-Manual
129
7. Carefully slide the old HDD or SSD from the drive connector, then
remove it from the module bay.
old HDD or SSD
8. Carefully place the new HDD or SSD into the module bay, then
slide the drive towards the drive connector.
drive connector
new HDD or SSD
drive connector
130
Notebook PC E-Manual
9. Replace the bracket on the module bay to secure and stabilize
the new HDD or SSD in place.
10. Orient and insert the module bay into the module slot then
gently push all the way until the spring module lock and module
latch clicks into place.
Notebook PC E-Manual
131
11. Secure the module bay using the screw you removed earlier.
132
Notebook PC E-Manual
Notebook PC E-Manual
133
Tips and FAQs
134
Notebook PC E-Manual
Useful tips for your Notebook PC
To help you maximize the use of your Notebook PC, maintain its system
performance, and ensure all your data are kept secured, here are some
useful tips that you can follow:
• Update Windows® periodically to ensure that your applications
have the latest security settings.
• Use ASUS Live Update to update ASUS-exclusive applications,
drivers and utilities in your Notebook PC. Refer to the ASUS Tutor
installed in your Notebook PC for more details.
• Use an anti-virus software to protect your data and keep this
updated too.
• Unless absolutely necessary, refrain from using force shutdown to
turn o your Notebook PC.
• Always backup your data and make it a point to create a backup
data in an external storage drive.
• Refrain from using the Notebook PC at extremely high
temperatures. If you are not going to use your Notebook PC for a
long period of time (at least a month), we recommend that you
take out the battery if the battery is removable.
• Disconnect all external devices and ensure you have the following
items prior to resetting your Notebook PC:
- Product key for your operating systems and other installed
applications
- Backup data
- Log in ID and password
- Internet connection information
Notebook PC E-Manual
135
Hardware FAQs
1. A black dot, or sometimes a colored dot, appears onscreen
when I turn on the Notebook PC. What should I do?
Although these dots normally appear onscreen, they will not
aect your system. If the incident continues and subsequently
aects system performance, consult an authorized ASUS service
center.
2. My display panel has an uneven color and brightness. How
can I x this?
The color and brightness of your display panel may be aected
by the angle and current position of your Notebook PC. The
brightness and color tone of your Notebook PC may also vary per
model. You may use the function keys or the display settings in
your operating system to adjust the appearance of your display
panel.
3. How can I maximize my Notebook PC ‘s battery life?
You can try doing any of the following suggestions:
• Use Battery Mode under Power4Gear.
• Use the function keys to adjust the display brightness.
• Enable Battery Saving mode under Instant On.
• If you are not using any Wi-Fi connection, switch your
system into Airplane mode.
• Disconnect unused USB devices.
• Close unused applications, especially those that take up too
much system memory.
136
Notebook PC E-Manual
4. My battery LED indicator does not light up. What’s wrong?
• Check whether the power adapter or battery pack is
attached correctly. You may also disconnect the power
adapter or battery pack, wait for a minute, then reconnect
them again to the power outlet and Notebook PC.
• If the problem still exists, contact your local ASUS service
center for assistance.
5. Why is my touchpad not working?
• Press to enable your touchpad.
• Check if ASUS Smart Gesture has been set to disable the
touchpad when connecting an external pointing device.
6. When I play audio and video les, why can’t I hear any sound
from my Notebook PC’s audio speakers?
You can try doing any of the following suggestions:
• Press to turn up the speaker volume.
• Check if your speakers were set to mute.
• Check if a headphone jack is connected to your Notebook
PC and remove it.
• Unlock the I/O Interface Security in your system’s BIOS. For
more details, refer to the I/O Interface Security section in
this manual.
7. What should I do if my Notebook PC’s power adapter gets lost
or my battery stops working?
Contact your local ASUS service center for assistance.
Notebook PC E-Manual
137
8. Why does audio still come out from my Notebook PC’s audio
speakers even if I already connected my headphone into the
right jack port?
Go to Control Panel > Hardware and Sound then access Audio
Manager to congure the settings.
9. My Notebook PC cannot do keystrokes correctly because my
cursor keeps on moving. What should I do?
Make sure that nothing accidentally touches or presses on your
touchpad while you type on the keyboard. You can also disable
your touchpad by pressing .
10. My Notebook PC’s touchpad is not working. What should I
do?
You can try doing any of the following suggestions:
• Check if ASUS Smart Gesture is set to disable touchpad by
connecting an external pointing device to your Notebook
PC. If yes, disable this function.
• Press .
11. Instead of showing letters, pressing the “U”, “I”, and “O” keys
on my keyboard displays numbers. How can I change this?
Press the key or (on selected models) on
your Notebook PC to turn o this feature and use the said keys for
inputting letters.
138
Notebook PC E-Manual
Software FAQs
1. When I turn on my Notebook PC, the power indicator lights
up but not my drive activity indicator. System bootup does
not happen as well. What can I do to x this?
You can try doing any of the following suggestions:
• Force shutdown your Notebook PC by pressing the power
button for more than four (4) seconds. Check if the power
adapter and battery pack are inserted correctly then turn on
your Notebook PC.
• If the problem still exists, contact your local ASUS service
center for assistance.
2. What should I do when my screen displays this message:
“Remove disks or other media. Press any key to restart.”?
You can try doing any of the following suggestions:
• Remove all connected USB devices then restart your
Notebook PC.
• Remove any optical discs that are left inside the optical drive
then restart.
• If the problem still exists, your Notebook PC might have a
memory storage problem. Contact your local ASUS service
center for assistance.
3. My Notebook PC boots slower than usual and my operating
system lags. How can I x this?
Delete the applications you recently installed or were not
included with your operating system package then restart your
system.
Notebook PC E-Manual
139
4. My Notebook PC does not boot up. How can I x this?
You can try doing any of the following suggestions:
• Remove all connected devices to your Notebook PC then
restart your system.
• Press F9 upon startup. When your Notebook PC enters
Troubleshooting, select Refresh or Reset your PC.
• If the problem still exists, contact your local ASUS service
center for assistance.
5. Why can’t my Notebook PC wake up from sleep or hibernate
mode?
• You need to press the power button to resume your last
working state.
• Your system might have completely used up its battery
power. Connect the power adapter to your Notebook PC
and connect to a power outlet then press the power button.
140
Notebook PC E-Manual
6. How can I boot to DOS using my USB drive or ODD?
Refer to the following steps:
a. Restart your Notebook PC and enter BIOS by pressing F2 on
your keyboard.
b. Go to Boot > Launch CSM > Enabled.
c. Go to the Security menu then set Secure Boot Control to
Disabled.
d. Press F10 to save changes and exit BIOS.
e. Press and hold ESC to launch boot menu when your
Notebook PC restarts.
Notebook PC E-Manual
141
Appendices
142
Notebook PC E-Manual
Overview
On 4th August 1998 the European Council Decision regarding the CTR 21 has
been published in the Ocial Journal of the EC. The CTR 21 applies to all non
voice terminal equipment with DTMF-dialling which is intended to be connected
to the analogue PSTN (Public Switched Telephone Network).
CTR 21 (Common Technical Regulation) for the attachment requirements for
connection to the analogue public switched telephone networks of terminal
equipment (excluding terminal equipment supporting the voice telephony
justied case service) in which network addressing, if provided, is by means of
dual tone multifrequency signalling.
Network Compatibility Declaration
Statement to be made by the manufacturer to the Notied Body and the vendor:
“This declaration will indicate the networks with which the equipment is designed
to work and any notied networks with which the equipment may have inter-
working diculties.”
Statement to be made by the manufacturer to the user: “This declaration will
indicate the networks with which the equipment is designed to work and any
notied networks with which the equipment may have inter-working diculties.
The manufacturer shall also associate a statement to make it clear where network
compatibility is dependent on physical and software switch settings. It will also
advise the user to contact the vendor if it is desired to use the equipment on
another network.”
Up to now the Notied Body of CETECOM issued several pan-European approvals
using CTR 21. The results are Europe’s rst modems which do not require
regulatory approvals in each individual European country.
Non-Voice Equipment
Answering machines and loud-speaking telephones can be eligible as well as
modems, fax machines, auto-dialers and alarm systems. Equipment in which the
end-to-end quality of speech is controlled by regulations (e.g. handset telephones
and in some countries also cordless telephones) is excluded.
Notebook PC E-Manual
143
This table shows the countries currently under the CTR21
standard.
Country Applied More Testing
Austria
1
Yes No
Belgium Yes No
Czech Republic No Not Applicable
Denmark
1
Yes Yes
Finland Yes No
France Yes No
Germany Yes No
Greece Yes No
Hungary No Not Applicable
Iceland Yes No
Ireland Yes No
Italy Still Pending Still Pending
Israel No No
Lichtenstein Yes No
Luxemburg Yes No
The Netherlands
1
Yes Yes
Norway Yes No
Poland No Not Applicable
Portugal No Not Applicable
Spain No Not Applicable
Sweden Yes No
Switzerland Yes No
United Kingdom Yes No
144
Notebook PC E-Manual
This information was copied from CETECOM and is supplied without liability. For
updates to this table, you may visit http://www.cetecom.de/technologies/ctr_21.
html
1 National requirements will apply only if the equipment may use pulse dialling
(manufacturers may state in the user guide that the equipment is only intended to
support DTMF signalling, which would make any additional testing superuous).
In The Netherlands additional testing is required for series connection and caller
ID facilities.
Federal Communications Commission
Interference Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Notebook PC E-Manual
145
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! The use of a shielded-type power cord is required in order to meet
FCC emission limits and to prevent interference to the nearby radio and television
reception. It is essential that only the supplied power cord be used. Use only shielded
cables to connect I/O devices to this equipment. You are cautioned that changes or
modications not expressly approved by the party responsible for compliance could
void your authority to operate the equipment.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Oce of the Federal Register, National Archives and Records
Administration, U.S. Government Printing Oce.)
FCC Radio Frequency (RF) Exposure Caution
Statement
WARNING! Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
“The manufacture declares that this device is limited to Channels 1 through 11 in the
2.4GHz frequency by specied rmware controlled in the USA.”
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with FCC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specic operating instructions for
satisfying RF exposure compliance.
146
Notebook PC E-Manual
Declaration of Conformity (R&TTE directive
1999/5/EC)
The following items were completed and are considered relevant and sucient:
• Essential requirements as in [Article 3]
• Protection requirements for health and safety as in [Article 3.1a]
• Testing for electric safety according to [EN 60950]
• Protection requirements for electromagnetic compatibility in [Article 3.1b]
• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN 301
489-17]
• Eective use of the radio spectrum as in [Article 3.2]
• Radio test suites according to [EN 300 328-2]
CE Marking
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements of the EEC
directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low
voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/EC of the
European Parliament and Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
Notebook PC E-Manual
147
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with IC RF exposure
compliance requirements, please avoid direct contact to the transmitting antenna
during transmitting. End users must follow the specic operating instructions for
satisfying RF exposure compliance.
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile
Satellite systems) this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing.
This device complies with Industry Canada licence-exempt RSS standard(s).
CAN ICES-3(B)/NMB-3(B)
148
Notebook PC E-Manual
Déclaration d’Industrie Canada relative à l’
exposition aux ondes radio
Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie
Canada dénies pour un environnement non-contrôlé. Pour maintenir la
conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact
direct avec l’antenne pendant l’émission. Les utilisateurs naux doivent suivre
les instructions de fonctionnement spéciques pour satisfaire la conformité aux
expositions RF.
Son utilisation est sujette aux deux conditions suivantes :
• Cet appareil ne peut pas causer d’interférence, et
• Cet appareil doit accepter toute interférence, y compris les interférences
qui pourraient causer un fonctionnement non souhaité de l’appareil.
Pour éviter les interférences radio avec le service sous licence (c’est à-dire le
partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné
à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal.
Tout appareil (ou son antenne d’émission) qui est installé en extérieur est sujet à
cette licence.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence.
CAN ICES-3(B)/NMB-3(B)
Notebook PC E-Manual
149
France Restricted Wireless Frequency Bands
Some areas of France have a restricted frequency band. The worst case maximum
authorized power indoors are:
• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz
NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5
MHz.
There are few possibilities for outdoor use: on private property or on the private
property of public persons, use is subject to a preliminary authorization procedure
by the Ministry of Defense, with maximum authorized power of 100mW in the
2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
• Maximum authorized power indoors is 100mW
• Maximum authorized power outdoors is 10mW
Wireless Operation Channel for Dierent
Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
150
Notebook PC E-Manual
Departments in which the use of the 2400–2483.5 MHz band is permitted with an
EIRP of less than 100mW indoors and less than 10mW outdoors:
01 Ain 02 Aisne 03 Allier
05 Hautes Alpes 08 Ardennes 09 Ariège
11 Aude 12 Aveyron 16 Charente
24 Dordogne 25 Doubs 26 Drôme
32 Gers 36 Indre 37 Indre et Loire
41 Loir et Cher 45 Loiret 50 Manche
55 Meuse 58 Nièvre 59 Nord
60 Oise 61 Orne 63 Puy du Dôme
64 Pyrénées Atlantique 66 Pyrénées Orientales 67 Bas Rhin
68 Haut Rhin 70 Haute Saône 71 Saône et Loire
75 Paris 82 Tarn et Garonne 84 Vaucluse
88 Vosges 89 Yonne 90 Territoire de Belfort
94 Val de Marne
This requirement is likely to change over time, allowing you to use your wireless
LAN card in more areas within France. Please check with ART for the latest
information (www.arcep.fr)
NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW.
Notebook PC E-Manual
151
UL Safety Notices
Required for UL 1459 covering telecommunications (telephone) equipment
intended to be electrically connected to a telecommunication network that has an
operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak,
and 105V rms, and installed or used in accordance with the National Electrical
Code (NFPA 70).
When using the Notebook PC modem, basic safety precautions should always be
followed to reduce the risk of re, electric shock, and injury to persons, including
the following:
• DO NOT use the Notebook PC near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
• DO NOT use the Notebook PC during an electrical storm. There may be a
remote risk of electric shock from lightning.
• DO NOT use the Notebook PC in the vicinity of a gas leak.
Required for UL 1642 covering primary (nonrechargeable) and secondary
(rechargeable) lithium batteries for use as power sources in products. These
batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may
consist of a single electrochemical cell or two or more cells connected in series,
parallel, or both, that convert chemical energy into electrical energy by an
irreversible or reversible chemical reaction.
• Do not dispose the Notebook PC battery pack in a re, as they may
explode. Check with local codes for possible special disposal instructions
to reduce the risk of injury to persons due to re or explosion.
• Do not use power adapters or batteries from other devices to reduce the
risk of injury to persons due to re or explosion. Use only UL certied
power adapters or batteries supplied by the manufacturer or authorized
retailers.
152
Notebook PC E-Manual
Power Safety Requirement
Products with electrical current ratings up to 6A and weighing more than 3Kg
must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75mm
2
or
H05VV-F, 2G, 0.75mm
2
.
TV Notices
Note to CATV System Installer—Cable distribution system should be grounded
(earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC),
in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial
Cable – installation should include bonding the screen of the coaxial cable to the
earth at the building entrance.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we publish the chemical
substances in our products at ASUS REACH website at http://csr.asus.com/english/
REACH.htm.
Macrovision Corporation Product Notice
This product incorporates copyright protection technology that is protected by
method claims of certain U.S.A. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only
unless otherwise
authorized by Macrovision Corporation
. Reverse engineering or disassembly is
prohibited.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Notebook PC E-Manual
153
Nordic Lithium Cautions (for lithium-ion
batteries)
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions. (English)
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato.
Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla
fabbrica. Non disperdere le batterie nell’ambiente. (Italian)
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz
nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning
må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri
tilbage til leverandøren. (Danish)
VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller
en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt
batteri enligt fabrikantens instruktion. (Swedish)
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo
valmistagan ohjeiden mukaisesti. (Finnish)
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la
batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type
équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant. (French)
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte
batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)
(Japanese)
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно
его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями
производителя. (Russian)
154
Notebook PC E-Manual
Optical Drive Safety Information
Laser Safety Information
WARNING! To prevent exposure to the optical drive’s laser, do not attempt to
disassemble or repair the optical drive by yourself. For your safety, contact a
professional technician for assistance.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Service warning label
WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR
VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976.
These regulations apply to laser products manufactured from August 1, 1976.
Compliance is mandatory for products marketed in the United States.
WARNING! Use of controls or adjustments or performance of procedures other
than those specied herein or in the laser product installation guide may result in
hazardous radiation exposure.
Coating Notice
IMPORTANT! To provide electrical insulation and maintain electrical safety, a
coating is applied to insulate the device except on the areas where the I/O ports
are located.
Notebook PC E-Manual
155
CTR 21 Approval (for Notebook PC with built-in
Modem)
Danish
Dutch
English
Finnish
French
156
Notebook PC E-Manual
German
Greek
Italian
Portuguese
Spanish
Swedish
Notebook PC E-Manual
157
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping
us all save money and protect the environment through energy
ecient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR
standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 15 and 30 minutes
of user inactivity. To wake your computer, click the mouse or press any key on
the keyboard. Please visit http://www.energy.gov/powermanagement for detail
information on power management and its benets to the environment. In
addition, please visit http://www.energystar.gov for detail information on the
ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.
European Union Eco-label
This Notebook PC has been awarded the EU Flower label.
For more information on the EU Flower label, please visit the European Union Eco-
label website at http://www.ecolabel.eu.
158
Notebook PC E-Manual
Global Environmental Regulation Compliance
and Declaration
ASUS follows the green design concept to design and manufacture our products,
and makes sure that each stage of the product life cycle of ASUS product is in line
with global environmental regulations. In addition, ASUS disclose the relevant
information based on regulation requirements.
Please refer to http://csr.asus.com/english/Compliance.htm for information
disclosure based on regulation requirements ASUS is complied with:
Japan JIS-C-0950 Material Declarations
EU REACH SVHC
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for you to be able to responsibly recycle our products, batteries, other
components as well as the packaging materials. Please go to http://csr.asus.com/
english/Takeback.htm for detailed recycling information in dierent regions.
Regional notice for Singapore
This ASUS product complies with IDA Standards.
Complies with
IDA Standards
DB103778
Notebook PC E-Manual
159
Congratulations!
This product is TCO Certified –for Sustainable IT
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance –protection against sound spikes (headsets) and fan noise (projectors, computers)
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
For more information, please visit
www.tcodevelopment.com
160
Notebook PC E-Manual
EC Declaration of Conformity
We, the undersigned,
Manufacturer: ASUSTeK COMPUTER INC.
Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Country: TAIWAN
Authorized representative in Europe: ASUS COMPUTER GmbH
Address, City: HARKORT STR. 21-23, 40880 RATINGEN
Country: GERMANY
declare the following apparatus:
Product name : Notebook PC
Model name : B551L,PRO551L,E551L
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.7.1(2006-10)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 908-13 V5.2.1(2011-05)
EN 301 893 V1.6.1(2011-11)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011 EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directive
Ver. 130816
CE marking
Declaration Date: 29/01/2014
Year to begin affixing CE marking: 2014
Position : CEO
Name :
Jerry Shen
Signature :
__________
(EC conformity marking)
EC Declaration of Conformity
We, the undersigned,
Manufacturer: ASUSTeK COMPUTER INC.
Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Country: TAIWAN
Authorized representative in Europe: ASUS COMPUTER GmbH
Address, City: HARKORT STR. 21-23, 40880 RATINGEN
Country: GERMANY
declare the following apparatus:
Product name : Notebook PC
Model name : B551L,PRO551L,E551L
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
EN 55022:2010+AC:2011
EN 61000-3-2:2006+A2:2009
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2008
EN 55020:2007+A11:2011
1999/5/EC-R &TTE Directive
EN 300 328 V1.8.1(2012-06)
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 908-13 V5.2.1(2011-05)
EN 301 893 V1.7.1(2012-06)
EN 302 544-2 V1.1.1(2009-01)
EN 302 623 V1.1.1(2009-01)
EN 50360:2001
EN 62479:2010
EN 50385:2002
EN 62311:2008
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.4.1(2008-11)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
2006/95/EC-LVD Directive
EN 60950-1 / A12:2011 EN 60065:2002 / A12:2011
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 642/2009
Regulation (EC) No. 278/2009
Regulation (EC) No. 617/2013
2011/65/EU-RoHS Directive
Ver. 130816
CE marking
Declaration Date: 29/01/2014
Year to begin affixing CE marking: 2014
Position : CEO
Name :
Jerry Shen
Signature :
__________
(EC conformity marking)