Table of Contents
- Notices
- Chapter 1
- Getting started
- Chapter 2
- Connecting devices to your computer
- Chapter 3
- Using your computer
- Chapter 4
- Connecting to the Internet
- Chapter 5
- Using ASUS Business Manager
- Chapter 6
- Troubleshooting
- Appendix
- Windows® 7 / Windows® 10 User Manual
- Chapter 1
- Using Windows® 7
- Chapter 2
- Using Windows® 10
- ASUS contact information
ASUS D540MA-i787000390Z35 User Manual
Displayed below is the user manual for D540MA-i787000390Z35 by ASUS which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
ASUS Desktop PC
User Guide
D540MA D540MB
D540SA
SD/MMC/MS
Smart Card
SD/MMC/MS
Smart Card
D540MC
2
Copyright © 2018 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK
Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such
repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is
defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF
ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS
MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE
ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES
THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights
of their respective companies, and are used only for identification or explanation and to the owners’ benefit,
without intent to infringe.
E14639
First Edition
August 2018
3
Contents
Notices ................................................................................................................................................ 5
Safety information .........................................................................................................................10
Conventions used in this guide.................................................................................................11
Where to find more information ...............................................................................................11
Package contents ...........................................................................................................................12
Chapter 1 Getting started
Welcome! ........................................................................................................................................... 13
Getting to know your computer ...............................................................................................13
Setting up your computer...........................................................................................................29
Turning your computer ON ........................................................................................................34
Chapter 2 Connecting devices to your computer
Connecting a USB storage device ............................................................................................35
Removing a USB storage device ...............................................................................................37
Connecting microphone and speakers ..................................................................................38
Changing to the external audio output .................................................................................42
Connecting multiple external displays ..................................................................................43
Chapter 3 Using your computer
Proper posture when using your Desktop PC ...................................................................... 45
Using the memory card reader (optional) .............................................................................46
Using the optical drive (on selected models only) .............................................................47
Configuring the USB ports using the BIOS............................................................................48
Configuring the HDD security setting using the BIOS ......................................................49
Chapter 4 Connecting to the Internet
Wired connection ........................................................................................................................... 51
Wi-Fi connection (on selected models only) ........................................................................58
Chapter 5 Using ASUS Business Manager
ASUS Business Manager ..............................................................................................................59
Chapter 6 Troubleshooting
Troubleshooting .............................................................................................................................69
4
Contents
Appendix
Windows® 7 / Windows® 10 User Manual
Chapter 1 Using Windows® 7
Preloading the USB 2.0/3.0 drivers for Windows® 7 installation ....................................79
Starting for the first time .............................................................................................................84
Using Windows® 7 desktop..........................................................................................................85
Managing your files and folders ...............................................................................................87
Restoring your system settings .................................................................................................89
Protecting your computer...........................................................................................................90
Getting Windows® Help and Support ......................................................................................91
Recovering your system ...............................................................................................................92
Chapter 2 Using Windows® 10
Starting for the first time .............................................................................................................95
Using the Windows® 10 UI ...........................................................................................................96
Keyboard shortcuts .................................................................................................................... 100
ASUS contact information
ASUS contact information ........................................................................................................ 102
5
Notices
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals)
regulatory framework, we published the chemical substances in our products at ASUS REACH
website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• Thisdevicemaynotcauseharmfulinterference;and
• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdierentfromthattowhichthereceiveris
connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
The use of shielded cables for connection of the monitor to the graphics card is required to
assure compliance with FCC regulations. Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Lithium Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions.
6
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210
of Industry Canada. This Class B device meets all the requirements of the Canadian interference-
causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Déclaration de conformité d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Cet appareil
numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. Son utilisation est sujette aux deux conditions suivantes : (1) cet appareil
ne doit pas créer d’interférences et (2) cet appareil doit tolérer tout type d’interférences, y compris
celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
Avertissement relatif aux batteries Lithium
ATTENTION ! Danger d’explosion si la batterie n’est pas correctement remplacée. Remplacer
uniquement avec une batterie de type semblable ou équivalent, recommandée par le
fabricant. Jeter les batteries usagées conformément aux instructions du fabricant.
7
RF Equipment Notices
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz). This wireless device complies with the R&TTE Directive.
Wireless Radio Use
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
Exposure to Radio Frequency Energy
The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure
limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential
for human contact during normal operation is minimized.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be colocated or operated in conjunction with any
other antenna or transmitter subject to the conditions of the FCC Grant.
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment
regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
BSMI: Taiwan Wireless Statement
Japan RF Equipment Statement
KC (RF Equipment)
India E-Waste (Management) Rules 2016
This product complies with the "India E-Waste (Management) Rules, 2016" and prohibits use of
lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated
diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials
and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in
Schedule II of the Rule.
8
ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping us
all save money and protect the environment through energy
efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the
ENERGY STAR standard, and the power management feature is
enabled by default. The monitor and computer are automatically
set to sleep after 10 and 30 minutes of user inactivity. To wake
your computer, click the mouse or press any key on the keyboard.
Please visit http://www.energystar.gov/powermanagement for detail information on
power management and its benefits to the environment. In addition, please visit http://
www.energystar.gov for detail information on the ENERGY STAR joint program.
*Note: Energy Star is NOT supported on Freedos and Linux-based products.
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of
conformity is available at https://www.asus.com/support/.
The Wi-Fi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed
in the table below:
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
9
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
WARNING! To prevent exposure to the optical drive’s laser, do not attempt to disassemble
or repair the optical drive by yourself. For your safety, contact a professional technician for
assistance.
Service warning label
WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser
products manufactured from August 1, 1976. Compliance is mandatory for products marketed in
the United States.
WARNING! Use of controls or adjustments or performance of procedures other than those
specified herein or in the laser product installation guide may result in hazardous radiation
exposure.
Optical Drive Safety Information
Laser Safety Information
10
Safety information
Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean
cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few
drops of warm water then remove any extra moisture with a dry cloth.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been
damaged.
• DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
• DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop
PC.
• DO NOT expose to strong magnetic or electrical fields.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during
electrical storms.
• Batterysafetywarning:DO NOT throw the battery in fire. DO NOT short circuit the contacts.
DO NOT disassemble the battery.
• Usethisproductinenvironmentswithambienttemperaturesbetween5˚C(41˚F)and35˚C
(95˚F).
• DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Hazardous Moving Parts Warning
WARNING: Keep fingers and other body parts away from any moving parts.
Hazardous moving parts. Desktop should be completely shutdown before servicing product.
Replacing fan components should only be attempted by qualified service personnel.
11
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software products.
Refer to the ASUS website www.asus.com.
ASUS Local Technical Support
Visit ASUS website at https://www.asus.com/support/contact for the contact information of
local Technical Support Engineer.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
12
Package contents
• Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer.
• Theillustrateditemsaboveareforreferenceonly.Actualproductspecicationsmayvarywith
different models.
SD/MMC/MS
Smart Card
ASUS Desktop PC Keyboard x1 Mouse x1
Power cord x1 Support DVD x1 Recovery DVD x1 (Optional)
Installation Guide
Nero burning software
DVD x1 (Optional)
Installation Guide x1 Warranty card x1
ASUS mouse pad x 1
(Optional)
Welcome!
Thank you for purchasing the ASUS Desktop PC!
The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and user-
centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system
casing.
Read the ASUS Warranty Card before setting up your ASUS Desktop PC.
Getting to know your computer
Illustrations are for reference only. The ports and their locations, and the chassis color vary with
different models.
ASUS Desktop PC 13
Chapter 1
Getting started
Front panel
D540MA
SD/MMC/MS
Smart Card
Power button. Press this button to turn on your computer.
Microphone port. This Mic (pink) port connects a microphone.
Headphone port. This Line In (lime) port connects a headphone with a stereo mini-
plug.
Optical disk drive (optional). This optical disk drive reads or writes data to or from
optical discs.
Optical disk drive eject button (optional). Press this button to eject the optical disk
drive tray.
Memory card readers (optional). This area contains one or more memory card reader
slots.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
USB 3.1 gen1 port. The Universal Serial Bus 3.1 gen1 (USB 3.1 gen1) port connects to
USB 3.1 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others.
14 Chapter 1: Getting started
ENGLISH
ENGLISH
• DONOTconnectakeyboard/mousetoanyUSB3.1gen1portwheninstallingWindows®
operating system.
• DuetoUSB3.1gen1controllerlimitations,USB3.1gen1devicescanonlybeusedundera
Windows® OS environment and after USB 3.1 gen1 driver installation.
• USB3.1gen1devicescanonlybeusedasdatastorageonly.
• WestronglyrecommendthatyouconnectUSB3.1gen1devicestoUSB3.1gen1portsfor
faster and better performance for your USB 3.1 gen1 devices.
USB 3.1 gen1 or Type-C port (only for data transfer). The Universal Serial Bus 3.1
gen1 (USB 3.1 gen1) or Type-C port connects to USB 3.1 gen1 or Type-C devices such as
a mouse, printer, scanner, camera, PDA, and others.
D540MB
5.25 inch optical disk drive bay. The 5.25 inch optical disk drive bay is for 5.25 inch
DVD-ROM / CD-RW / DVD-RW devices.
Power button. Press this button to turn on your computer.
Microphone port. This Mic (pink) port connects a microphone.
Memory card readers (optional). This area contains one or more memory card reader
slots.
Headphone port. This Line In (lime) port connects a headphone with a stereo mini-
plug.
SD/MMC/MS
Smart Card
ASUS Desktop PC 15
ENGLISH
ENGLISH
USB 3.1 gen1 port. The Universal Serial Bus 3.1 gen1 (USB 3.1 gen1) port connects to
USB 3.1 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetoanyUSB3.1gen1portwheninstallingWindows®
operating system.
• DuetoUSB3.1gen1controllerlimitations,USB3.1gen1devicescanonlybeusedundera
Windows® OS environment and after USB 3.1 gen1 driver installation.
• USB3.1gen1devicescanonlybeusedasdatastorageonly.
• WestronglyrecommendthatyouconnectUSB3.1gen1devicestoUSB3.1gen1portsfor
faster and better performance for your USB 3.1 gen1 devices.
USB 3.1 gen1 or Type-C port (only for data transfer). The Universal Serial Bus 3.1
gen1 (USB 3.1 gen1) or Type-C port connects to USB 3.1 gen1 or Type-C devices such as
a mouse, printer, scanner, camera, PDA, and others.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
D540MC
16 Chapter 1: Getting started
ENGLISH
ENGLISH
HDD LED.
On: HDD is ready.
Flashing: The HDD is transmitting or receiving data.
Reset button. Press this button to reset your computer.
Power button. Press this button to turn on your computer.
5.25 inch optical disk drive bay. The 5.25 inch optical disk drive bay is for 5.25 inch
DVD-ROM / CD-RW / DVD-RW devices.
Optical disk drive eject button (optional). Press this button to eject the optical disk
drive tray.
Headphone port. This Line In (lime) port connects a headphone with a stereo mini-
plug.
Microphone port. This Mic (pink) port connects a microphone.
USB 3.1 gen1 port. The Universal Serial Bus 3.1 gen1 (USB 3.1 gen1) port connects to
USB 3.1 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetoanyUSB3.1gen1portwheninstallingWindows®
operating system.
• DuetoUSB3.1gen1controllerlimitations,USB3.1gen1devicescanonlybeusedundera
Windows® OS environment and after USB 3.1 gen1 driver installation.
• USB3.1gen1devicescanonlybeusedasdatastorageonly.
• WestronglyrecommendthatyouconnectUSB3.1gen1devicestoUSB3.1gen1portsfor
faster and better performance for your USB 3.1 gen1 devices.
USB 3.1 gen1 or Type-C port (only for data transfer). The Universal Serial Bus 3.1
gen1 (USB 3.1 gen1) or Type-C port connects to USB 3.1 gen1 or Type-C devices such as
a mouse, printer, scanner, camera, PDA, and others.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
ASUS Desktop PC 17
ENGLISH
ENGLISH
D540SA
SD/MMC/MS
Smart Card
Power button. Press this button to turn on your computer.
Optical disk drive eject button (optional). Press this button to eject the optical disk
drive tray.
Optical disk drive (optional). This optical disk drive reads or writes data to or from
optical discs.
Memory card readers (optional). This area contains one or more memory card reader
slots.
Microphone port. This Mic (pink) port connects a microphone.
Headphone port. This Line In (lime) port connects a headphone with a stereo mini-
plug.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
USB 3.1 gen1 or Type-C port (only for data transfer). The Universal Serial Bus 3.1
gen1 (USB 3.1 gen1) or Type-C port connects to USB 3.1 gen1 or Type-C devices such as
a mouse, printer, scanner, camera, PDA, and others.
18 Chapter 1: Getting started
ENGLISH
ENGLISH
USB 3.1 gen1 port. The Universal Serial Bus 3.1 gen1 (USB 3.1 gen1) port connects to
USB 3.1 gen1 devices such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetoanyUSB3.1gen1portwheninstallingWindows®
operating system.
• DuetoUSB3.1gen1controllerlimitations,USB3.1gen1devicescanonlybeusedundera
Windows® OS environment and after USB 3.1 gen1 driver installation.
• USB3.1gen1devicescanonlybeusedasdatastorageonly.
• WestronglyrecommendthatyouconnectUSB3.1gen1devicestoUSB3.1gen1portsfor
faster and better performance for your USB 3.1 gen1 devices.
Rear panel
D540MA
Power connector. Plug the power cord to this connector.
RATING: 115/230Vac, 50-60Hz, 6/3A or
220-230Vac, 50Hz, 3A or
230Vac, 50Hz, 3A or
100-120Vac, 50-60Hz, 8A
ASUS Desktop PC 19
ENGLISH
ENGLISH
PS/2 mouse port (green). This port is for a PS/2 mouse.
PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
USB 3.1 Gen 2 (up to 10Gbps) ports (teal blue, Type A). These 9-pin Universal Serial
Bus 3.1 (USB 3.1) Gen 2 ports are for USB 3.1 Gen 2 devices.
• USB3.1Gen2/Gen1devicescanonlybeusedfordatastorage.
• DuetothedesignoftheIntel® 300 series chipset, all USB devices connected to the USB 2.0
and USB 3.1 Gen 2 / Gen 1 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
• WestronglyrecommendthatyouconnectUSB3.1Gen2devicestoUSB3.1Gen2portsfor
faster and better performance from your USB 3.1 Gen 2 devices.
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
Microphone port (pink). This port connects a microphone.
Line Out port (lime). This port connects a headphone or a speaker. In 4.1-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
Refer to the audio configuration table below for the function of the audio ports in a 2.1, 4.1,
5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port Headset 2.1-channel 4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Front panel - - - Side Speaker Out
20 Chapter 1: Getting started
ENGLISH
ENGLISH
Serial port. This COM port is for pointing devices or other serial devices.
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your
computer.
VGA port. This port is for VGA-compatible devices such as a VGA monitor.
Serial port (on selected models only). This COM port is for pointing devices or other
serial devices.
LPT connector (on selected models only). Connect a parallel device such as a printer
to this LPT (Line Printing Terminal) connector.
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED
LED
ACT/LINK
LED
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
ASUS Graphics Card (on selected models only). The display output ports on this
optional ASUS Graphics Card may vary with different models.
ASUS Desktop PC 21
ENGLISH
ENGLISH
D540MB
Power switch. Switch to turn ON/OFF the power supply to your computer.
Power connector. Plug the power cord to this connector.
RATING: 115/230Vac, 50-60Hz, 6/3A or
220-230Vac, 50Hz, 3A or
230Vac, 50Hz, 3A or
100-120Vac, 50-60Hz, 8A
PS/2 mouse port (green). This port is for a PS/2 mouse.
PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetoanyUSB3.0portwheninstallingaWindows®
operating system.
• Windows®7requiresUSB3.0drivertobeinstalledbeforeusingUSB3.0devices.
• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0portsforafasterand
better performance from your USB 3.0 devices.
22 Chapter 1: Getting started
ENGLISH
ENGLISH
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
Microphone port (pink). This port connects a microphone.
Line Out port (lime). This port connects a headphone or a speaker. In 4.1-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
Refer to the audio configuration table below for the function of the audio ports in a 2.1, 4.1,
5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port Headset 2.1-channel 4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Front panel - - - Side Speaker Out
Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
ASUS Graphics Card (on selected models only). The display output ports on this
optional ASUS Graphics Card may vary with different models.
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED
LED
ACT/LINK
LED
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
ASUS Desktop PC 23
ENGLISH
ENGLISH
Serial ports (on selected models only). These COM ports are for pointing devices or
other serial devices.
LPT connector (on selected models only). Connect a parallel device such as a printer
to this LPT (Line Printing Terminal) connector.
Serial port. This COM port is for pointing devices or other serial devices.
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your
computer.
VGA port. This port is for VGA-compatible devices such as a VGA monitor.
D540MC
Power connector. Plug the power cord to this connector.
RATING: 115/230Vac, 50-60Hz, 6/3A or
220-230Vac, 50Hz, 3A or
230Vac, 50Hz, 3A or
100-120Vac, 50-60Hz, 8A
24 Chapter 1: Getting started
ENGLISH
ENGLISH
PS/2 mouse port (green). This port is for a PS/2 mouse.
PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetoanyUSB3.0portwheninstallingaWindows®
operating system.
• Windows®7requiresUSB3.0drivertobeinstalledbeforeusingUSB3.0devices.
• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0portsforafasterand
better performance from your USB 3.0 devices.
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
Microphone port (pink). This port connects a microphone.
Line Out port (lime). This port connects a headphone or a speaker. In 4.1-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
Refer to the audio configuration table below for the function of the audio ports in a 2.1, 4.1,
5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port Headset 2.1-channel 4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Front panel - - - Side Speaker Out
Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
ASUS Graphics Card (on selected models only). The display output ports on this
optional ASUS Graphics Card may vary with different models.
ASUS Desktop PC 25
ENGLISH
ENGLISH
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED
LED
ACT/LINK
LED
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
LPT connector (on selected models only). Connect a parallel device such as a printer
to this LPT (Line Printing Terminal) connector.
Serial ports (on selected models only). These COM ports are for pointing devices or
other serial devices.
Serial port. This COM port is for pointing devices or other serial devices.
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your
computer.
VGA port. This port is for VGA-compatible devices such as a VGA monitor.
26 Chapter 1: Getting started
ENGLISH
ENGLISH
D540SA
PS/2 mouse port (green). This port is for a PS/2 mouse.
PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
USB 3.1 Gen 2 (up to 10Gbps) ports (teal blue, Type A). These 9-pin Universal Serial
Bus 3.1 (USB 3.1) Gen 2 ports are for USB 3.1 Gen 2 devices.
• USB3.1Gen2/Gen1devicescanonlybeusedfordatastorage.
• DuetothedesignoftheIntel® 300 series chipset, all USB devices connected to the USB 2.0
and USB 3.1 Gen 2 / Gen 1 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
• WestronglyrecommendthatyouconnectUSB3.1Gen2devicestoUSB3.1Gen2portsfor
faster and better performance from your USB 3.1 Gen 2 devices.
DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
ASUS Desktop PC 27
ENGLISH
ENGLISH
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your
computer.
Power connector. Plug the power cord to this connector.
RATING: 115/230Vac, 50-60Hz, 6/3A or
220-230Vac, 50Hz, 3A
Expansion slot brackets. Remove the expansion slot bracket when installing an
expansion card.
ASUS WLAN Card (on selected models only). This optional WLAN card allows your
computer to connect to a wireless network.
LPT connectors (on selected models only). Connect a parallel device such as a printer
to these LPT (Line Printing Terminal) connectors.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port Headset 2.1-channel 4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Front panel - - - Side Speaker Out
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED
LED
ACT/LINK
LED
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
Microphone port (pink). This port connects a microphone.
Line Out port (lime). This port connects a headphone or a speaker. In 4.1-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
Refer to the audio configuration table below for the function of the audio ports in a 2.1, 4.1,
5.1, or 7.1-channel configuration.
28 Chapter 1: Getting started
ENGLISH
ENGLISH
Serial port. This COM port is for pointing devices or other serial devices.
Serial port (on selected models only). This COM port is for pointing devices or other
serial devices.
VGA port. This port is for VGA-compatible devices such as a VGA monitor.
Setting up your computer
This section guides you through connecting the main hardware devices, such as the external
monitor, keyboard, mouse, and power cord, to your computer.
Connecting an external monitor
Using the ASUS Graphics Card (on selected models only)
Connect your monitor to the display output port on the discrete ASUS Graphics Card.
To connect an external monitor using the ASUS Graphics Card:
1. Connect a monitor to a display output port on the ASUS Graphics Card.
2. Plug the monitor to a power source.
The display output ports on the ASUS Graphics Card may vary with different models.
D540MA
ASUS Desktop PC 29
ENGLISH
ENGLISH
Using the onboard display output ports
Connect your monitor to the onboard display output port.
To connect an external monitor using the onboard display output ports:
1. Connect a VGA monitor to the VGA port or a DVI-D monitor to the DVI-D port on the rear
panel of your computer.
2. Plug the monitor to a power source.
D540MA D540MB
D540MC
• IfyourcomputercomeswithanASUSGraphicsCard,thegraphicscardissetastheprimary
display device in the BIOS. Hence, connect your monitor to a display output port on the
graphics card.
• Toconnectmultipleexternalmonitorstoyourcomputer,refertoConnecting multiple
external display in Chapter 2 of this guide for details.
D540SA
DVI
30 Chapter 1: Getting started
ENGLISH
ENGLISH
Connecting a USB keyboard and a USB mouse
Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.
DVI
D540MA
D540MB
D540MC
ASUS Desktop PC 31
ENGLISH
ENGLISH
Connecting the power cord
Connect one end of the power cord to the power connector on the rear panel of your computer
and the other end to a power source.
D540MA
D540SA
`
32 Chapter 1: Getting started
ENGLISH
ENGLISH
D540MB
D540MC
D540SA
ASUS Desktop PC 33
ENGLISH
ENGLISH
SD/MMC/MS
Smart Card
Turning your computer ON
This section describes how to turn on your computer after setting up your computer.
Turning your computer ON
To turn your computer ON:
1. Turn your monitor ON.
2. Press the power button on your computer.
3. Wait until the operating system loads automatically.
Power button
D540MA D540MB
SD/MMC/MS
Smart Card
D540SA
SD/MMC/MS
Smart Card
Power button
Power button
Power button
D540MC
34 Chapter 1: Getting started
ENGLISH
ENGLISH
Connecting a USB storage device
This desktop PC provides USB 2.0 and USB 3.0 ports on both the front and rear panels. The USB
ports allow you to connect USB devices such as storage devices.
To connect a USB storage device:
• InserttheUSBstoragedevicetoyourcomputer.
Front panel
You can enable or disable the front and rear USB 2.0 and USB 3.0 ports individually from the BIOS
Setup. Refer to the Configuring the USB ports using the BIOS section in Chapter 3 of this user
manual for details.
SD/MMC/MS
Smart Card
SD/MMC/MS
Smart Card
SD/MMC/MS
Smart Card
D540MA D540MB
D540SA
D540MC
ASUS Desktop PC 35
ENGLISH
ENGLISH
Chapter 2
Connecting devices to your computer
D540MA D540MB
D540SA
D540MC
36 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Rear panel
Removing a USB storage device
Windows® 7
To remove a USB storage device on Windows® 7:
1. Click from the Windows notification area on your
computer, then click Eject USB2.0 FlashDisk or Eject USB3.0
FlashDisk if you are using the USB 3.0 flash drive or USB
3.0-compatible devices.
2. When the Safe to Remove Hardware message
pops up, remove the USB storage device from your
computer.
Windows® 10
To remove a USB storage device on Windows® 10:
1. Click , then click from the Windows taskbar on your computer, then click Eject.
2. When the Safe to Remove Hardware message pops up, remove the USB storage device
from your computer.
DO NOT remove a USB storage device when data transfer is in progress. Doing so may cause data
loss or damage the USB storage device.
ASUS Desktop PC 37
ENGLISH
ENGLISH
SD/MMC/MS
Smart Card
Connecting Headphone and Mic
Connecting microphone and speakers
This desktop PC comes with microphone ports and speaker ports on both the front and rear panels.
The audio I/O ports located on the rear panel allow you to connect 2.1-channel, 4.1-channel,
5.1-channel, and 7.1-channel stereo speakers.
• WhenyourDesktopPCcomeswithaninternalspeaker,theaudiooutputwillbefromthe
internal speaker.
• Whenyouconnectanexternalaudiodevicesuchasearphoneorspeaker,youneedtoenable
the audio device output. For details, refer to the section Changing to the external audio
output.
• Whenyoudisconnecttheaudiodevice,youneedtomanuallychangetheaudiooutputtothe
internal speaker from the Control Panel.
D540MB
D540MA
38 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
D540SA
SD/MMC/MS
Smart Card
SD/MMC/MS
Smart Card
D540MC
ASUS Desktop PC 39
ENGLISH
ENGLISH
Connecting 4.1-channel Speakers
LINE OUT
Connecting 2.1-channel Speakers
LINE OUT
40 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Connecting 5.1-channel Speakers
LINE OUT
Connecting 7.1-channel Speakers
LINE OUT
SD/MMC/MS
Smart Card
ASUS Desktop PC 41
ENGLISH
ENGLISH
Changing to the external audio output
When you connect an external audio device to your Desktop PC, enable the audio device output to
ensure a clear audio quality.
To change to the external audio output:
1. Connect an external audio device such as earphone or speaker to the rear Line Out port. The
Audio Manager screen automatically pops up.
For the location of the rear Line Out port, refer to the section Getting to know your computer.
2. Tick Front Speaker Out, then click
OK.
3. Tick Line In, then click OK. The
audio output will now be from the
external audio device.
The Audio Manager screenshots above are for reference only.
ENGLISH
ENGLISH
42 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Connecting multiple external displays
Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple
external displays.
Setting up multiple displays
When using multiple monitors, you are allowed to set display modes. You can use the additional
monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.
To set up multiple displays:
1. Turn off your computer.
2. Connect the two monitors to your computer and connect the power cords to the monitors.
Refer to Setting up your computer section in Chapter 1 for details on how to connect a
monitor to your computer.
D540MA
SD/MMC/MS
Smart Card
D540MB
ASUS Desktop PC 43
ENGLISH
ENGLISH
ENGLISH
ENGLISH
3. Turn on your computer.
4. From the Start menu, click Settings > System > Display.
5. Configure the settings for your displays.
For some graphic cards, only the monitor that is set to be the primary display has display during
POST. The dual display function works only under Windows.
D540SA
SD/MMC/MS
Smart Card
D540MC
44 Chapter 1: Getting started
ENGLISH
ENGLISH
ASUS Desktop PC 45
ENGLISH
ENGLISH
Chapter 3
Using your computer
Proper posture when using your Desktop PC
When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your
wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical
discomfort and possible injury while using and fully enjoying your Desktop PC.
Eye level to the top of
the monitor screen
Foot rest 90˚ angles
To maintain the proper posture:
• Positionyourcomputerchairtomakesurethatyourelbowsareatorslightlyabovethe
keyboard to get a comfortable typing position.
• Adjusttheheightofyourchairtomakesurethatyourkneesareslightlyhigherthanyour
hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your
knees.
• Adjustthebackofyourchairsothatthebaseofyourspineisrmlysupportedandangled
slightly backward.
• Situprightwithyourknees,elbowsandhipsatanapproximately90ºanglewhenyouareat
the PC.
• Placethemonitordirectlyinfrontofyou,andturnthetopofthemonitorscreenevenwith
your eye level so that your eyes look slightly downward.
• Keepthemouseclosetothekeyboard,andifnecessary,useawristrestforsupportto
reduce the pressure on your wrists while typing.
• UseyourDesktopPCinacomfortably-litarea,andkeepitawayfromsourcesofglaresuchas
windows and straight sunlight.
• Takeregularmini-breaksfromusingyourDesktopPC.
Using the memory card reader (optional)
Digital cameras and other digital
imaging devices use memory cards
to store digital picture or media files.
The built-in memory card reader on
the front panel of your system allows
you to read from and write to different
memory card drives.
To use the memory card:
1. Insert the memory card into the card slot.
• Amemorycardiskeyedsothatittsinonlyonedirection.DONOTforceacardintoaslotto
avoid damaging the card.
• Youcanplacemediainoneormoreofthecardslotsanduseeachmediaindependently.Place
only one memory card in a slot at one time.
2. Select a program from the AutoPlay window to access your files.
• OnWindows® 7, if AutoPlay is NOT enabled in your computer, click Windows® 7 Start button on
the taskbar, click Computer, and then double-click the memory card icon to access the data on
it.
• OnWindows®10,ifAutoPlayisNOTenabledinyourcomputer,clickFile Explorer from the
Start menu, and then double-click the memory card icon to access the data on it.
• EachcardslothasitsowndriveiconwhichisdisplayedontheFileExplorerscreen.
3. When finished, right-click the memory card drive icon on the Computer screen, click Eject,
and then remove the card.
Never remove cards while or immediately after reading, copying, formatting, or deleting data on
the card or else data loss may occur.
To prevent data loss, use “Safely Remove Hardware and Eject Media” in the Windows® notification
area before removing the memory card.
SD/MMC/MS
Smart Card
SD/MMC/MS
Smart Card
ENGLISH
ENGLISH
46 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Using the optical drive (on selected models only)
SD/MMC/MS
Smart Card
Inserting an optical disc
To insert an optical disc:
1. While your system is on, press the eject button below the drive bay cover to open the tray.
2. Place the disc on the optical drive with the label side outward if the desktop is positioned
vertically and the label side up if the desktop is positioned horizontally.
3. Push the tray to close it.
4. Select a program from the AutoPlay window to access your files.
If AutoPlay is NOT enabled in your computer, to access the data on an optical disc:
• OnWindows® 7, click the Start > Computer, and double-click the CD/DVD drive icon.
• OnWindows® 10, click File Explorer from the Start menu, then double-click the CD/DVD
drive icon.
Removing an optical disc
To remove an optical disc:
1. While the system is on, do either of the following to eject the tray:
• Presstheejectbuttonbelowthedrivebaycover.
• FromtheStartmenu,clickFile Explorer, right-click the CD/DVD drive icon, and click
Eject.
2. Remove the disc from the disc tray.
ASUS Desktop PC 47
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Configuring the USB ports using the BIOS
You can enable or disable the front and rear USB 2.0 and USB 3.0 ports from the BIOS Setup.
To disable or enable the front and rear USB 2.0 and USB 3.0 ports:
1. Press <Delete> to enter the BIOS Setup at startup.
2. From the BIOS Setup screen, click Advanced > USB Configuration > USB Single Port
Control.
3. Select the USB port that you want to enable or disable.
4. Press <Enter> to enable or disable the selected USB port.
5. Click Exit and select Save Changes & Reset to save the changes made.
Refer to Chapter 1 for the location of the USB ports.
48 Chapter 3: Using your computer
ENGLISH
ENGLISH
Configuring the HDD security setting using the BIOS
You can set a password in the BIOS Setup to protect your HDD.
To set a password for your HDD from the BIOS Setup:
1. Press <Delete> to enter the BIOS Setup at startup.
2. From the BIOS Setup EZ Mode screen, click Exit > Advanced Mode. From the Advanced
Mode screen, click Main > HDDx: [name of HDD] to open the HDD Password screen.
3. Select the Set User Password item and press <Enter>.
4. From the Create New Password box, key in a password, then press <Enter>.
5. Conrmthepasswordwhenprompted.
6. Click Exit and select Save Changes & Reset to save the changes made.
Take note of this password, which you would need to access the HDD.
To change the password for your HDD from the BIOS Setup:
1. Follow steps 1 and 2 of the previous section to open the HDD Password screen.
2. Select the Set User Password item and press <Enter>.
3. From the Enter Current Password box, key in the current password, then press
<Enter>.
4. From the Create New Password box, key in a new password, then press <Enter>.
5. Conrmthepasswordwhenprompted.
6. Click Exit and select Save Changes & Reset to save the changes made.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter>whenpromptedtocreate/conrmthepassword.Afteryouclearthepassword,the
Set User Password item on top of the screen shows Not Installed.
ASUS Desktop PC 49
ENGLISH
ENGLISH
50 Chapter 3: Using your computer
ENGLISH
ENGLISH
Wired connection
Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).
Connecting via a DSL/cable modem
To connect via a DSL/cable modem:
1. Set up your DSL/cable modem.
Refer to the documentation that came with your DSL/cable modem.
2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to a DSL/cable modem.
Modem
RJ-45 cable
D540MA
ASUS Desktop PC 51
ENGLISH
ENGLISH
Chapter 4
Connecting to the Internet
D540MB
Modem
RJ-45 cable
D540SA
Modem
RJ-45 cable
D540MC
Modem
RJ-45 cable
52 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
Connecting via a local area network (LAN)
To connect via a LAN:
1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to your LAN.
LAN
RJ-45 cable
D540MA
D540MB
LAN
RJ-45 cable
ASUS Desktop PC 53
ENGLISH
ENGLISH
2. Turn on your computer.
3. Configure the necessary Internet connection settings.
• ContactyournetworkadministratorfordetailsorassistanceinsettingupyourInternet
connection.
• Formoredetails,refertothesectionsConfiguring a dynamic IP/PPPoE network connection
or Configuring a static IP network connection.
D540MC
LAN
RJ-45 cable
D540SA
LAN
RJ-45 cable
54 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE network connection:
1. Launch Network and Sharing Center in Windows® 7 / 10 system.
Windows® 7
• GotoStart > Control Panel > Network and Sharing Center.
Windows® 10
• Doeitherofthesetwoways:
•Fromthetaskbar,right-click , then click Open Network and Sharing Center.
•FromtheStartmenu,clickSettings > Network & Internet > Ethernet > Network and
Sharing Center.
2. From the Open Network and Sharing Center
screen, click Change Adapter settings.
3. Right-click on your LAN and select
Properties.
4. Click Internet Protocol Version 4(TCP/
IPv4) and click Properties.
ASUS Desktop PC 55
ENGLISH
ENGLISH
5. Click Obtain an IP address automatically
and click OK.
Continue to the next steps if you are using PPPoE connection.
8. Select Connect to the Internet and
click Next.
7. Return to the Network and
Sharing Center and then click
Set up a new connection or
network.
56 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
9. Select Broadband (PPPoE) and click
Next.
10. Follow the next onscreen instructions to
complete the setup.
Configuring a static IP network connection
To configure a static IP network connection:
1. Repeat steps 1 to 4 of the previous section.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway
from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
5. When done, click OK.
ASUS Desktop PC 57
ENGLISH
ENGLISH
Wi-Fi connection (on selected models only)
Connect your computer to the Internet through a wireless connection.
To establish a Wi-Fi connection, you need to connect to a wireless access point (AP).
• Toincreasetherangeandsensitivityofthewirelessradiosignal,connecttheexternal
antennas to the antenna connectors on the ASUS WLAN Card.
• Placetheantennasonthetopofyourcomputerforthebestwirelessperformance.
• Theexternalantennaisanoptionalitem.
Wireless AP
Modem
D540SA
58 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
3. On the ASUS Manager setup screen, select the applications you want to install.
4. Click Install.
5. The system will prompt you to reboot your system once installation is complete.
ASUS Business Manager
ASUS Manager provides a set of tools for customizing and maintaining your ASUS computer.
Installing ASUS Business Manager
1. Insert your ASUS support DVD into your optical drive.
2. On the support CD window, click Utilities > ASUS Business Manager.
ASUS Desktop PC 59
ENGLISH
ENGLISH
Chapter 5
Using ASUS Business Manager
Starting ASUS Manager
Launch ASUS Manager from the Start Menu by clicking Start > ASUS > ASUS Manager
Icon View and List View
ASUS Manager has an Icon View and List View. Click the List View icon to display a list of
tools available for your system.
Icon View
List View
List View
60 Chapter 5: Using ASUS Business Manager
ENGLISH
ENGLISH
System
The System Information screen displays hardware and software details about your computer.
Update
Click Update on the main ASUS Manager screen to download and install hardware drivers, the
latest BIOS, and updated ASUS applications.
ASUS Desktop PC 61
ENGLISH
ENGLISH
Security
Click Security on the main ASUS Manager screen to access PC Cleanup and USB Lock utilities.
PC Cleanup
PC Cleanup provides options to remove temporary and unnecessary files from your computer to
free up hard drive space.
ASUS Secure Delete
ASUS Secure Delete keeps your files secure by making deleted files completely irrecoverable using
a simple drag-and-drop interface.
62 Chapter 5: Using ASUS Business Manager
ENGLISH
ENGLISH
1. Once ASUS Secure Delete is launched, do any of
the following to add files to the deletion box:
• Draganddropthelestothedeletionbox.
2. To remove a file from the deletion list, select the
file, then click .
• Right-clickthelethenselectASUSSecure
Delete.
To use ASUS Secure Delete:
3. Tick Delete the files listed in the recycle bin if
you want to permanently delete all the files in
the recycle bin.
4. Click Clear, and then click OK on the
confirmation message to permanently delete
all the files listed in the deletion box and the
recycle bin (if selected in step 3).
ASUS Desktop PC 63
ENGLISH
ENGLISH
Backup & Recovery
Click Recovery on the main ASUS Manager screen to begin Windows maintenance tasks such as
system restoration, adjusting startup settings and repairing Windows with a recovery disk.
USB Lock
The USB Lock feature secures your USB ports, card reader and optical drive from unwanted access
by setting up a password.
64 Chapter 5: Using ASUS Business Manager
ENGLISH
ENGLISH
Power
Click Power on the main ASUS Manager screen to configure power management. With Power
Manager, you can specity time settings for system hibernation, sleep, display and hard drive activity.
Tool
Click Tool on the main ASUS Manager screen to access the Support screen, Ai Booting or MyLogo.
Support
Support lists links to ASUS support web sites and contact information.
ASUS Desktop PC 65
ENGLISH
ENGLISH
Ai Booting
Ai Booting displays a list of bootable storage devices. Select a device and click the left/right buttons
to modify the boot sequence.
MyLogo
ASUS MyLogo allows you to customize the boot logo. The boot logo is the image that appears on
screen during the Power-On Self-Tests (POST).
66 Chapter 5: Using ASUS Business Manager
ENGLISH
ENGLISH
Changing the BIOS boot logo
1. Select any of the options, then click Next:
• ChangetheBIOSbootlogoandupdatetheBIOS.
• ChangetheBIOSbootlogoonly.
Beforeselectingtherstoption,downloadtheBIOSletoyourcomputerusingASUS
Update.
2. Click Browse to locate the picture file that you want to use as the boot logo (and the
downloaded BIOS if required) and then click Run.
3. Follow the onscreen instructions to complete the process.
ASUS Desktop PC 67
ENGLISH
ENGLISH
68 Chapter 5: Using ASUS Business Manager
ENGLISH
ENGLISH
ASUS Desktop PC 69
ENGLISH
ENGLISH
Chapter 6
Troubleshooting
Troubleshooting
This chapter presents some problems you might encounter and the possible solutions.
?
My computer cannot be powered on and the power LED on the front panel
does not light up.
• Checkifyourcomputerisproperlyconnected.
• Checkifthewalloutletisfunctioning.
• CheckifthePowerSupplyUnitisswitchedon.RefertothesectionTurning your
computer ON/OFF in Chapter 1.
?
My computer hangs.
• Dothefollowingtoclosetheprogramsthatarenotresponding:
1. Simultaneously press <Alt> + <Ctrl> + <Delete> keys on the keyboard, then
click Task Manager.
2. Do the following based on the operating system:
On Windows® 7:
a) Click Applications tab.
b) Select the program that is not responding, then click End Task.
On Windows® 10:
Under Task Manager in the Processes tab, select the program that is not
responding, then click End Task.
• Ifthekeyboardisnotresponding.PressandholdthePowerbuttononthetopof
your chassis until the computer shuts down. Then press the Power button to turn it
on.
?
I cannot connect to a wireless network using the ASUS WLAN Card (on
selected models only)?
• Ensurethatyouenterthecorrectnetworksecuritykeyforthewirelessnetworkyou
want to connect to.
• Connecttheexternalantennas(optional)totheantennaconnectorsontheASUS
WLAN Card and place the antennas on the top of your computer chassis for the
best wireless performance.
?
The arrow keys on the number key pad are not working.
Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on
the number key pad are used to input numbers only. Press the Number Lock key to
turn the LED off if you want to use the arrow keys on the number key pad.
?
No display on the monitor.
• Checkifthemonitorispoweredon.
• Ensurethatyourmonitorisproperlyconnectedtothevideooutputportonyour
computer.
• Ifyourcomputercomeswithadiscretegraphicscard,ensurethatyouconnectyour
monitor to a video output port on the discrete graphics card.
• Checkifanyofthepinsonthemonitorvideoconnectorisbent.Ifyoudiscover
bent pins, replace the monitor video connector cable.
• Checkifyourmonitorispluggedtoapowersourceproperly.
• Refertothedocumentationthatcamewithyourmonitorformoretroubleshooting
information.
?
When using multiple monitors, only one monitor has display.
• Ensurethatthebothmonitorsarepoweredon.
• DuringPOST,onlythemonitorconnectedtotheVGAporthasdisplay.Thedual
display function works only under Windows.
• Whenagraphicscardisinstalledonyourcomputer,ensurethatyouconnectthe
monitors to the output port on the graphics card.
• Checkifthemultipledisplayssettingsarecorrect.
?
My computer cannot detect my USB storage device.
• ThersttimeyouconnectyourUSBstoragedevicetoyourcomputer,Windows
automatically installs a driver for it. Wait for a while and go to My Computer to
check if the USB storage device is detected.
• ConnectyourUSBstoragedevicetoanothercomputertotestiftheUSBstorage
device is broken or malfunctions.
70 Chapter 6: Troubleshooting
ENGLISH
ENGLISH
?
I want to restore or undo changes to my computer’s system settings
without affecting my personal files or data.
On Windows® 7:
The Windows® System Restore feature allows you to restore or undo changes to
your computer’s system settings without affecting your personal data such as
documents or photos. For more details, refer to the section Restoring your system
in Chapter 2.
On Windows® 10:
You can use Windows® 10 recovery option to refresh or reset your computer’s
system settings. To use the refresh option, click Settings > Update & recovery >
Reset this PC from the Start menu, select Keep my files, wait for several seconds
and click Next to continue or Cancel to quit. To use the reset option, click Settings
> Update & recovery > Reset this PC from the Start menu, select Remove
everything > Only the drive where Windows is installed > Just remove my files,
and click Reset.
By default, your personal files, apps and settings are stored in the system volume (eg.
C:\), ensure to move them to a data volume (eg. D:\ or E:\) before resetting your system.
?
The picture on the HDTV is distorted.
• ItiscausedbythedierentresolutionsofyourmonitorandyourHDTV.Adjustthe
screen resolution to fit your HDTV. To change the screen resolution:
On Windows® 7:
1. Do any of the following to open the Screen Resolution setting screen:
•Click > Control Panel > Appearance and Personalization > Display >
Change display settings.
•RightclickanywhereonyourWindowsdesktop.Whenthepop-upmenu
appears, click Personalize > Display > Change display settings.
2. Adjust the resolution. Refer to the documentation came with your HDTV for
the resolution.
3. Click Apply or OK. Then click Keep Changes on the confirmation message.
On Windows® 10
• FromtheStartmenu,clickSettings > System > Display.
ASUS Desktop PC 71
ENGLISH
ENGLISH
?
My speakers produce no sound.
• EnsurethatyouconnectyourspeakerstotheLineoutportonthefrontpanelor
the rear panel.
• Checkifyourspeakerisconnectedtoanelectricalsourceandturnedon.
• Adjustyourspeakers’volume.
• Ensurethatyourcomputer’ssystemsoundsarenotMuted.
• Ifitismuted,thevolumeiconisdisplayedas . To enable the system
sounds, click from the Windows notification area, then click .
• Ifitisnotmuted,click and drag the slider to adjust the volume.
• Connectyourspeakerstoanothercomputertotestifthespeakersareworking
properly.
?
The DVD drive cannot read a disc.
• Checkifthediscisplacedwiththelabelsidefacingup.
• Checkifthedisciscenteredinthetray,especiallyforthediscswith
non-standard size or shape.
• Checkifthediscisscratchedordamaged.
?
The DVD drive eject button is not responding.
1. On Windows® 7, click > Computer.
On Windows® 10, from the Start menu, click File Explorer.
2. Right-click , then click Eject from the menu.
72 Chapter 6: Troubleshooting
ENGLISH
ENGLISH
Power
Problem Possible Cause Action
No power
(The power
indicator is off)
Incorrect power voltage
•Setyourcomputer’spowervoltage
switch to your area’s power
requirements.
•Adjustthevoltagesettings.Ensurethat
the power cord is unplugged from the
power outlet.
Your computer is not turned
on.
Press the power key on the front panel to
ensure that your computer is turned on.
Your computer’s power cord
is not properly connected.
•Ensurethatthepowercordisproperly
connected.
•Useothercompatiblepowercord.
PSU (Power supply unit)
problems
Contact the ASUS Service Center about
installing another PSU on your computer.
ASUS Desktop PC 73
ENGLISH
ENGLISH
74 Chapter 6: Troubleshooting
ENGLISH
ENGLISH
Display
Problem Possible Cause Action
No display output
after turning the
computer on
(Black screen)
The signal cable is not
connected to the correct
VGA port on your computer.
•Connectthesignalcabletothecorrect
display port (onboard VGA or discrete
VGA port).
•IfyouareusingadiscreteVGAcard,
connect the signal cable to the discrete
VGA port.
Signal cable problems Try connecting to another monitor.
LAN
Problem Possible Cause Action
Cannot access the
Internet
The LAN cable is not
connected.
Connect the LAN cable to your
computer.
LAN cable problems
Ensure the LAN LED is on. If not, try
another LAN cable. If it still does not
work, contact the ASUS service center.
Your computer is not
properly connected to a
router or hub.
Ensure that your computer is properly
connected to a router or hub.
Network settings Contact your Internet Service Provider
(ISP) for the correct LAN settings.
Problems caused by the anti-
virus software Close the anti-virus software.
Driver problems Reinstall the LAN driver
ASUS Desktop PC 75
ENGLISH
ENGLISH
Audio
Problem Possible Cause Action
No Audio
Speaker or headphone is
connected to the wrong port.
•Refertoyourcomputer’susermanual
for the correct port.
•Disconnectandreconnectthespeaker
to your computer.
Speaker or headphone does
not work.
Try using another speaker or
headphone.
The front and back audio
ports do not work.
Try both the front and back audio ports.
If one port failed, check if the port is set
to multi-channel.
Driver problems Reinstall the audio driver
System
Problem Possible Cause Action
System speed is
too slow
Too many programs are
running. Close some of the programs.
Computer virus attack
•Useananti-virussoftwaretoscanfor
viruses and repair your computer.
•Reinstalltheoperatingsystem.
The system often
hangs or freezes.
Hard disk drive failure
•Sendthedamagedharddiskdriveto
ASUS Service Center for servicing.
•Replacewithanewharddiskdrive.
Memory module problems
•Replacewithcompatiblememory
modules.
•Removetheextramemorymodules
that you have installed, then try again.
•Contact the ASUS Service Center for
assistance.
There is not enough
air ventilation for your
computer.
Move your computer to an area with
better air flow.
Incompatible software are
installed.
Reinstall the OS and reinstall
compatible software.
76 Chapter 6: Troubleshooting
ENGLISH
ENGLISH
CPU
Problem Possible Cause Action
Too noisy right
after turning on the
computer.
Your computer is booting up.
It is normal. The fan runs on its full
speed when the computer is powering
on. The fan slows down after entering
the OS.
The BIOS settings have been
changed. Restore the BIOS to its default settings.
Old BIOS version
Update the BIOS to the latest version.
Visit the ASUS Support site at http://
support.asus.com to download the
latest BIOS versions.
Computer is too
noisy when in use.
The CPU fan has been
replaced.
Ensure that you are using a compatible
or ASUS-recommended CPU fan.
There is not enough air
ventilation for the computer.
Ensure that your computer is working
in an area with good air flow.
The system temperature is
too high.
•UpdatetheBIOS.
•Ifyouknowhowtoreinstallthe
motherboard, try to clean the inner
space of the chassis.
•Contact the ASUS Service Center for
assistance.
If the problem still persists, refer to your Desktop PC’s warranty card and contact the ASUS Service
Center. Visit the ASUS Support site at https://www.asus.com/support for the service center
information.
ASUS Desktop PC
Windows® 7 / Windows® 10
User Manual
E11014
First Edition
October 2015
Copyright © ASUSTeK Computer Inc.
All Rights Reserved
Appendix
Windows® 7 / Windows® 10 User Manual
78
ASUS Desktop PC 79
Chapter 1
Using Windows® 7
Preloading the USB 2.0/3.0 drivers for Windows® 7 installation
Preload the USB 2.0/3.0 drivers to be able to use the keyboard and mouse during the Windows®
7 installation. The following steps guide you in preloading the USB 2.0/3.0 drivers and installing
Windows® 7.
Method 1: Preloading/installing via ODD and USB device
1. Ensure that you have the following:
• ASUSSupportDVD(includedwithyourDesktopPCpackage)
• Windows®7installationsource(copiedtoaformattedUSBstoragedevicewith8GBor
morecapacity)
• Opticaldiskdrive(ODD)
2. Connect the USB storage device containing the Windows® 7 installer.
3. InserttheASUSsupportDVDintotheODDofyourDesktopPC.
4. TurnonyourDesktopPCandpress[F8]duringPOST(Power-OnSelfTest)toentertheboot
screen.
5. Select the USB storage device as the boot device.
80
6. The USB 2.0/3.0 driver loads automatically during the installation startup.
7. Follow the onscreen instructions to complete the Windows® 7 installation.
Method 2: Preloading/installing via ASUS EZ Installer
1. Ensure that you have the following:
• ASUSSupportDVD(includedwithyourDesktopPCpackage)
• Windows®7installationDVD
• DesktoporNotebookPC(withIntel®CPUexceptSkylakeorBraswellCPU)*
• ASUSDesktopPC**
• USBstoragedevice(with8GBormorecapacity)
• Internal/externalOpticalDiskDrive(ODD)
• *UseyourdesktopornotebookPCforsteps2to4.
• **UseyourASUSDesktopPCforsteps5to9.
2. Inyourcomputer,connectanexternalODDandinserttheWindows®7installationDVDinit.
3. ConnectanotherexternalODDtothesamecomputer,andinserttheASUSSupportDVDin
it.FromthesupportDVD,launchASUSEZInstaller.
4. Select any of these two methods to create a modified Windows® 7 installation file:
• Windows®7OSdisktoUSBstoragedevice
• Windows®7OSdisktoISOle
RefertothenextsectionsonthestepstocreateamodiedWindows®7installationle.
81
Windows® 7 OS disk to USB storage device
a) SelectWindows7OSdisktoUSBstoragedevicethenclickNext.
b) CheckIagreeandthenclickNext.
c) SelectthesourceoftheWindows®7installationdiskthenclickNext.
82
d) SelecttheUSBstoragedeviceandclickNext.
e) Clicktherefreshicon if the USB storage device is not displayed. Click Yes to clear the
contents on the USB storage device and create a bootable USB device.
The USB storage device will be formatted, so ensure that you have backed up your data from it.
f) Oncecompleted,clickOK to finish.
Windows® 7 OS disk to ISO file
a) SelectWindows7OSdisktoISOlethenclickNext.
83
b) CheckIagreeandthenclickNext.
c) SelectthesourceoftheWindows®7installationdiskthenclickNext.
d) SelectthefoldertosavethemodiedWindows®7installationISOleandclickNext.
84
ENGLISH
ENGLISH
e) Oncecompleted,clickOK to finish.
f) BurnorcopythisISOleontoanemptyDVDtocreateamodiedWindows®7
installationDVD.
5. InyourASUSDesktopPC,insertthemodiedWindows®7installationDVDintoanexternal
ODDorconnecttheUSBstoragedevicewithmodiedWindows®7installationles.
6. PoweronyourASUSDesktopPCandpress[F8]duringPOST(Power-OnSelfTest)toenterthe
boot screen.
7. SelecttheODDorUSBstoragedeviceasthebootdevice.
8. The USB 2.0/3.0 driver is loaded automatically during installation startup.
9. Follow the onscreen instructions to complete the Windows® 7 installation.
Starting for the first time
When you start your computer for the first time, a series of screens appear to guide you in
configuring the basic settings of your Windows® 7 operating system.
To start for the first time:
1. Turn your computer on. Wait for a few minutes until the Set Up Windows screen appears.
2. From dropdown list, select your language, then click Next.
3. From the dropdown lists, select your Country or region, Time and currency, and Keyboard
layout, then click Next.
4. Key in uniques names for the user name and computer name, then click Next.
5. Key in the necessary information to set up your password, then click Next. You may also click
Next to skip this step without entering any information.
If you want to set up a password for your account later, refer to the section Setting up a user
account and password in this chapter.
6. Carefully read the license terms. Tick I accept the license terms and click Next.
7. Select Use recommended settings or Install important updates only to set up the security
settings for your computer. To skip this step, select Ask me later.
8. Review your date and time settings. Click Next. The system loads the new settings and
restarts. You may now start using your computer.
ASUS Desktop PC 85
ENGLISH
ENGLISH
Using Windows® 7 desktop
Click the Start icon > Help and Support to obtain more information about Windows® 7.
Using the Start menu
The Start menu gives you access to programs, utilities, and other useful items on your computer. It
also provides you with more information about Windows 7 through its Help and Support feature.
Launching items from the Start menu
To launch items from the Start menu:
1. From the Windows® taskbar, click the Start icon .
2. From the Start menu, select the item that you want to launch.
You may pin programs that you want constantly displayed on the Start menu. For more details,
refer to the section Pinning programs on the Start menu or taskbar on this chapter.
Using the Getting Started item
The Getting Started item on the Start menu contains information about some basic tasks such as
personalizing Windows®, adding new users, and transferring files to help you to familiarize yourself
with using Windows® 7.
To use the Getting Started item:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Select Getting Started. The list of available tasks appears.
3. Select the task that you want to do.
Using the taskbar
The taskbar allows you to launch and manage programs or items installed on your computer.
Launching a program from the taskbar
To launch a program from the taskbar:
• FromtheWindows® taskbar, click an icon to launch it. Click the icon again to hide the
program.
You may pin programs that you want constantly displayed on the taskbar. For more details, refer
to the section Pinning programs on the Start menu or taskbar on this chapter.
86 Chapter 1: Using Windows® 7
ENGLISH
ENGLISH
Pinning items on the jumplists
Whenyouright-clickanicononthetaskbar,ajumplistlaunchestoprovideyouwithquick-access
totheprogram’soritem’srelatedlinks.Youmaypinitemsonthejumplistsuchasfavoritewebsites,
often-visitedfoldersordrives,orrecentlyplayedmediales.
To pin items to the jumplist:
1. Fromthetaskbar,right-clickanicon.
2. Fromthejumplist,right-clicktheitemthatyouwanttopin,thenselectPin to this list.
Unpinning items from the jumplist
To unpin items from the jumplist:
1. Fromthetaskbar,right-clickanicon.
2. Fromthejumplist,right-clicktheitemthatyouwanttoremovefromthejumplist,thenselect
Unpin from this list.
Pinning programs on the Start menu or taskbar
To pin programs on the Start menu or taskbar:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Right-clicktheitemthatyouwanttopinontheStartmenuortaskbar.
3. Select Pin to Taskbar or Pin to Start menu.
Youmayalsoright-clickontheiconofarunningprogramonthetaskbar,thenselectPin this
program to taskbar.
Unpinning programs from the Start menu
To unpin programs from the Start menu:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. FromtheStartmenu,right-clicktheprogramthatyouwanttounpin,thenselectRemove
from this list.
Unpinning programs from the taskbar
To unpin programs from the taskbar:
1. Fromthetaskbar,right-clicktheprogramthatyouwanttoremovefromthetaskbar,then
select Unpin this program from taskbar.
ASUS Desktop PC 87
ENGLISH
ENGLISH
Using the notification area
By default, the notification area shows these three icons:
Action Center notification
Click this icon to display all the alert messages/notifications and launch the Windows® Action
Center.
Network connection
This icon displays the connection status and signal strength of the wired or wireless network
connection.
Volume
Clickthisicontoadjustthevolume.
Displaying an alert notification
To display an alert notification:
• ClicktheNoticationicon , then click the message to open it.
For more details, refer to the section Using Windows® Action Center in this chapter.
Customizing icons and notifications
You may choose to display or hide the icons and notifications on the taskbar or on the notification
area.
To customize icons and notifications:
1. From the notification area, click on the arrow icon .
2. Click Customize.
3. From the dropdown list, select the behaviors for the icons or items that you want to
customize.
Managing your files and folders
Using Windows® Explorer
Windows®Explorerallowsyoutoview,manage,andorganizeyourlesandfolders.
Launching Windows® Explorer
To launch Windows Explorer:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Click ComputertolaunchWindowsExplorer.
88 Chapter 1: Using Windows® 7
ENGLISH
ENGLISH
Exploring files and folders
To explore files and folders:
1. Launch Windows®Explorer.
2. From the navigation or view pane, browse for the location of your data.
3. From the breadcrumb bar, click the arrow to display the contents of the drive or folder.
Customizing the file/folder view
To customize the file/folder view:
1. LaunchWindowsExplorer.
2. From the navigation pane, select the location of your data.
3. Fromthetoolbar,clicktheViewicon .
4. FromtheViewmenu,movetheslidertoselecthowyouwanttoviewthele/folder.
Youmayalsoright-clickanywhereontheViewpane,clickView, and select the view type that you
want.
Arranging your files
To arrange your files:
1. LaunchWindowsExplorer.
2. From the Arrange by field, click to display the dropdown list.
3. Select your preferred arrangement type.
Sorting your files
To sort your files:
1. LaunchWindowsExplorer.
2. Right-clickanywhereontheViewpane.
3. From the menu that appears, select Sort by, then select your preferred sorting type.
Grouping your files
To group your files:
1. LaunchWindowsExplorer.
2. Right-clickanywhereontheViewpane.
3. From the menu that appears, select Group by, then select your preferred grouping type.
ASUS Desktop PC 89
ENGLISH
ENGLISH
Adding a new folder
To add a new folder:
1. LaunchWindowsExplorer.
2. From the toolbar, click New folder.
3. Key in a name for the new folder.
Youmayalsoright-clickanywhereontheViewpane,clickNew > Folder.
Backing up your files
Setting up a backup
To set up a backup:
1. Click > All Programs > Maintenance > Backup and Restore.
2. Click Set up backup. Click Next.
3. Select your backup destination. Click Next.
4. Select Let Windows choose (recommended) or Let me choose as your backup mode.
If you select Let Windows choose,Windowswillnotbackupyourprograms,FAT-formattedles,
RecycleBinles,ortemporarylesthatare1GBormore.
5. Follow the onscreen instructions to finish the process.
Restoring your system settings
The Windows® System Restore feature creates a restore point where the computer’s system settings
are stored at certain time and date. It allows you to restore or undo changes to your computer’s
system settings without affecting your personal data.
To restore your system:
1. Close all running applications.
2. Click > All Programs > Accessories > System Tools > System Restore.
3. Follow the onscreen instructions to complete the process.
90 Chapter 1: Using Windows® 7
ENGLISH
ENGLISH
Protecting your computer
Using Windows® 7 Action Center
Windows® 7 Action Center provides you with alert notifications, security information, system
maintenanceinformation,andtheoptiontoautomaticallytroubleshootandxsomecommon
computer problems.
You may customize the notifications. For more details, refer to the previous section Customizing
icons and notifications in this chapter.
Launching Windows® 7 Action Center
To launch Windows® 7 Action Center:
1. To launch Windows®7ActionCenter,clicktheNoticationicon , then click Open Action
Center.
2. From Windows® 7 Action Center, click the task that you want to do.
Using Windows® Update
Windows Update allows you to check and install the latest updates to enhance the security and
performance of your computer.
Launching Windows® Update
To launch Windows® Update:
1. From the Windows® taskbar, click the Start icon to launch the Start menu.
2. Select All Programs > Windows Update.
3. From the Windows® Update screen, click the task that you want to do.
Setting up a user account and password
You may create user accounts and passwords for people who will use your computer.
Setting up a user account
To set up a user account:
1. From the Windows® taskbar, click > Getting Started > Add new users.
2. Select Manage another account.
3. Select Create a new account.
4. Key in the name of the new user.
5. Select either Standard user or Administrator as the user type.
6. When done, click Create Account.
ASUS Desktop PC 91
ENGLISH
ENGLISH
Setting up a user’s password
To set up a user’s password:
1. Select the user that you would like to set a password.
2. Select Create a password.
3. Key in a password and confirm it. Key in your password’s hint.
4. When done, click Create password.
Activating the anti-virus software
TrendMicroInternetSecurityispre-installedonyourcomputer.Itisathird-partyanti-virussoftware
protectingyourcomputerfromvirus.Itispurchasedseparately.Youhavea30-daytrialperiodafter
activating it.
To activate Trend Micro Internet Security:
1. Run the Trend Micro Internet Security application.
2. Carefully read the license terms. Click Agree & Activate.
3. Inputyoure-mailaddressandselectyourlocation.ClickNext.
4. Click Finish to complete the activation.
Getting Windows® Help and Support
Windows® Help and Support provides you with guides and answers in using the applications in
Windows® 7 platform.
To launch Windows® Help and Support, click > Help and Support.
Ensure that you are connected to the Internet to obtain the latest Windows® online help.
Recovering your system
Windows® 7
Using the system recovery partition
ThesystemrecoverypartitionquicklyrestoresyourDesktopPC’ssoftwaretoitsoriginalworking
state.Beforeusingthesystemrecoverypartition,copyyourdatales(suchasOutlookPSTles)to
USB storage devices or to a network drive and make note of any customized configuration settings
(suchasnetworksettings).
About the system recovery partition
The system recovery partition is a reserved space on your hard disk drive used to restore the
operatingsystem,drivers,andutilitiesinstalledonyourDesktopPCatthefactory.
DONOTdeletethesystemrecoverypartition,whichisthepartitionwithoutvolumelabelonDisk
0. The system recovery partition is created at the factory and cannot be restored if deleted. Take
yourDesktopPCtoanauthorizedASUSservicecenterifyouhaveproblemswiththerecovery
process.
Using the system recovery partition:
1. Press <F9> during bootup.
2. HighlightWindowsSetup[EMSEnabled]andpress<Enter>.
3. From the Recover system to a partition screen, click <Next>.
4. Follow the onscreen instructions to complete the recovery process.
VisittheASUSwebsiteatwww.asus.comforupdateddriversandutilities.
Using the Recovery DVD (on selected models)
RemovetheexternalharddiskdrivebeforeperformingsystemrecoveryonyourDesktopPC.
According to Microsoft, you may lose important data because of setting up Windows on the
wrong disk drive or formatting the incorrect drive partition.
To use the Recovery DVD:
1. InserttheRecoveryDVDintotheopticaldrive.YourDesktopPCneedstobepoweredON.
2. RestarttheDesktopPCandpress<F8>onbootupandselecttheopticaldrive(maybe
labeledas“CD/DVD”)andpress<Enter>tobootfromtheRecoveryDVD.
3. Select OK to start to restore the image.
4. Select OK to confirm the system recovery.
Restoring will overwrite your hard drive. Ensure to back up all your important data before the
system recovery.
5. Follow the onscreen instructions to complete the recovery process.
DONOTremovetheRecoverydisc,unlessinstructedtodoso,duringtherecoveryprocessorelse
your partitions will be unusable.
VisittheASUSwebsiteatwww.asus.comforupdateddriversandutilities.
94
ASUS Desktop PC 95
Chapter 2
Using Windows® 10
Starting for the first time
When you start your computer for the first time, a series of screens appear to guide you in
configuring the basic settings of your Windows® 10 operating system.
To start your Desktop PC for the first time:
1. PressthepowerbuttononyourDesktopPC.Waitforafewminutesuntilthesetupscreen
appears.
2. From the setup screen, pick your region and language that you want to use on your desktop
PC.
3. Carefully read the License Terms, then tap I Accept.
4. Follow the onscreen instructions to configure the following basic items:
• Personalize
• Getonline
• Settings
• Youraccount
5. Wait until Windows® 10 finishes installing the apps and system settings. After the installation,
the Windows® 10 desktop appears.
96 Chapter 2: Using Windows® 10
ENGLISH
ENGLISH
Click your account name to change the
picture, sign out of your account, or lock your
Desktop PC
Click to display all the apps
Click to put on sleep mode, shut down,
or restart your desktop PC
Click to expand the Start screen
Click to launch the Start menu
Pin on or launch
a tiled-format
app from the
Start screen
Pin on or launch an app
from the taskbar
Start menu
Windows® 10 brings back the Start menu with some enhancements, such as the space that you can
customize with your favorite apps, people, or websites.
You can launch the Start menu in two ways:
• ClicktheStartbuttonfromthelower-leftcornerofthetaskbar.
• PresstheWindows® Start key on your keyboard.
Pinning apps to the Start screen or taskbar
To pin an app to the Start screen or taskbar:
1. From the Start menu, click All apps, then select the app that you want to pin.
2. Click Pin to Start or Pin to taskbar to pin your selected app to the Start screen or taskbar.
You can also drag then drop an app to the Start Screen or taskbar to pin it.
Using the Windows® 10 UI
The Windows®10UserInterface(UI)includesthefavoriteStartmenuandthetiled-formatonthe
Startscreen.ItincludesthefollowingfeaturesyoucanusewhileworkingonyourDesktopPC.
ASUS Desktop PC 97
ENGLISH
ENGLISH
Start screen
The Start screen , which appears together with the Start menu, helps organize all the apps you need
injustoneplace.TheappsontheStartscreenaredisplayedontiled-formatforeasyaccess.
Some apps require signing in to your Microsoft account before they are fully launched.
Click to restore the
Start screen
Moving apps on the Start screen
You can move apps from the Start screen simply through dragging and dropping the app to your
preferred location.
Unpinning apps from the Start screen
TounpinanappfromtheStartscreen,right-clickontheapptoactivateitssettingsbarthenclick
Unpin from Start.
98 Chapter 2: Using Windows® 10
ENGLISH
ENGLISH
Taskbar
Windows® 10 comes with the standard taskbar, which stores all your currently running apps or
items in the background.
Unpinning apps from the taskbar
1. FromtheStartscreenortaskbar,right-clicktheappyouwanttounpin.
2. Click Unpin from Start or Unpin this program from taskbar to remove the app from the
Start screen or taskbar.
Using the Task View
When you have several running apps, you can click from the taskbar to display all your
running apps, and click on an app or item to launch it.
If task view is disabled, click > Show Task View button to display the task view icon .
ASUS Desktop PC 99
ENGLISH
ENGLISH
Snap feature
The Snap feature displays about four apps or more in one screen, allowing you to work or switch
among apps.
Using Snap
UseyourDesktopPC’smouseorkeyboardtoactivateSnaponscreen.
Using your mouse
a) Launchanapp,thendragandreleaseonascreencornertosnapitinplace.
b) Snapanotherapptoyourpreferredlocationonthescreen.
Using your keyboard
a) Launchanapp,press and the arrow keys to select the direction where you want to
snap the app in place.
b) Snapanotherappusing and the arrow keys.
100 Chapter 2: Using Windows® 10
ENGLISH
ENGLISH
Keyboard shortcuts
Using your keyboard, you can also use the following shortcuts to help you launch apps and
navigate Windows® 10.
Switches between the Start screen and the last running app
+<D>
Launches the desktop
+ <E>
LaunchesFileExplorer
+ <F> or
+ <W>
Activates the File search function
+ <H>
Launches Share
+ <I>
Launches Settings
+ <K>
Launches Media Connect
+ <L>
Activates the Lock screen
+ <M>
Hides all currently active screens to the taskbar
+ <P>
Your desktop PC is mirrored to your secondary monitor
+ <Q>
Launches Cortana
+ <R>
Launches the Run window
+ <U>
Launches Ease of Access Center
+ <X>
LaunchesamenuboxofWindowstools
ASUS Desktop PC 101
ENGLISH
ENGLISH
+ <+>
Launches the magnifier and zooms in your screen.
+<->
Zoomsoutyourscreen.
+ <Enter>
OpenstheNarratorSettings.
3. Follow the onscreen instructions to complete the reinstallation and reset process.
Removing everything and reinstalling Windows® 10
Restoring your PC to its original factory settings can be done using the Remove everything and
reinstall options in PC Settings. Refer to the steps below to use this option.
Back up all your data before using this option.
This process may take a while to complete.
1. From the Start menu, click Settings > Update & security > Recovery.
2. Scroll down to view the Remove everything and reinstall Windows option. Under this
option, click Get started.
102 Chapter 2: Using Windows® 10
ENGLISH
ENGLISH
ASUS contact information
ASUS contact information
ASUSTeK COMPUTER INC.
Address 4F,No.150,Li-TeRd.,Peitou,Taipei112,Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site www.asus.com/
Technical Support
Telephone +86-21-38429911
Fax +86-21-5866-8722,ext.9101#
Online support http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address 48720 Kato Rd., Fremont, CA 94538, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site http://www.asus.com/us/
Technical Support
Supportfax +1-812-284-0883
Telephone +1-812-282-2787
Online support http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address HarkortStr.21-23,D-40880Ratingen,Germany
Fax +49-2102-959931
Web site http://www.asus.com/de
Online contact http://eu-rma.asus.com/sales
Technical Support
Telephone +49-2102-5789555
SupportFax +49-2102-959911
Online support http://qr.asus.com/techserv