Table of Contents
- About this manual
- Chapter 1: Hardware Setup
- Chapter 2: Using your PC
- Chapter 3: Working with Windows® 8.1
- Chapter 4: Connecting to the Internet
- Chapter 5: Recovering your system
- A ppendices
ASUS E410-B0230 User Manual
Displayed below is the user manual for E410-B0230 by ASUS which is a product in the PC/Workstation Barebones category. This manual has pages.
Related Manuals
English
Mini Desktop PC
User Guide
E410
E10199
First Edition
March 2015
English
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN
IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identication or
explanation and to the owners’ benet, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you
are entitled to recover damages from ASUS. In each such instance, regardless of the basis
on which you are entitled to claim damages from ASUS, ASUS is liable for no more than
damages for bodily injury (including death) and damage to real property and tangible
personal property; or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed contract price of each
product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in
contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its
suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at http://support.asus.com
E410
3
English
Contents
About this manual ............................................................................................. 5
Conventions used in this manual ............................................................... 6
Safety information ............................................................................................. 7
Setting up your system................................................................................... 7
Care during use ................................................................................................. 7
Package contents ............................................................................................... 9
Chapter 1: Hardware Setup 10
Getting to know your PC ...............................................................................10
Front view .......................................................................................................... 10
Rear view ...........................................................................................................12
Chapter 2: Using your PC 14
Positioning your PC .........................................................................................14
Mounting your PC on the stand ................................................................14
Installing your PC to a monitor ..................................................................15
Using your PC ....................................................................................................19
Connecting to an external display ...........................................................19
Connecting to a USB device .......................................................................19
Connecting the wireless antenna .............................................................20
Turning on your PC ........................................................................................21
Configuring the audio output via an HDMI device ............................22
Chapter 3: Working with Windows® 8.1 24
System requirements ......................................................................................24
Starting for the first time ...............................................................................25
Windows® 8.1 lock screen .............................................................................25
Windows® UI ....................................................................................................... 26
Start Screen.......................................................................................................26
Windows® apps ............................................................................................... 26
Start button ......................................................................................................29
Customizing your Start screen ...................................................................31
Working with Windows® apps ......................................................................32
4
E410
English
Contents
Launching apps ............................................................................................... 32
Customizing apps from the Start screen................................................32
Accessing the Apps screen..........................................................................33
Charms bar ........................................................................................................ 35
Snap feature .....................................................................................................37
Other keyboard shortcuts .............................................................................38
Turning your PC off ..........................................................................................40
Putting your PC to sleep ................................................................................40
Entering the BIOS Setup ................................................................................41
Quickly enter the BIOS .................................................................................. 42
Chapter 4: Connecting to the Internet 43
Connecting on Windows® 7 .......................................................................... 43
Wireless connection ......................................................................................43
Wired connection ...........................................................................................44
Connecting on Windows® 8.1 .......................................................................49
Wi-Fi connection ............................................................................................. 49
Wired connection ..........................................................................................50
Chapter 5: Recovering your system 52
Recovery options on Windows® 7 ...............................................................52
Using the Recovery Partition ..................................................................... 52
Recovery options on Windows® 8.1 ............................................................54
Removing everything and reinstalling Windows ................................ 54
Appendices 55
Notices .................................................................................................................55
ASUS Contact Information ............................................................................ 61
E410
5
English
About this manual
This manual provides information about the hardware and software
features of your PC, organized through the following chapters:
Chapter 1: Hardware Setup
This chapter details the hardware components of your PC.
Chapter 2: Using your PC
This chapter provides you with information on using your PC.
Chapter 3: Working with Windows® 8.1
This chapter provides an overview of using Windows® 8.1 in
your PC.
Chapter 4: Connecting to the Internet
This chapter provides information on connecting your PC to a
wired or Wi-Fi network.
Chapter 5: Recovering your system
This chapter provides recovery options for your PC.
Appendices
This section includes notices and safety statements for your PC.
NOTE: For Windows® 8.1 OS, the user manual is located in the
following folder in your PC: C:\Program Files(X86)\ASUS\eManual
6
E410
English
Conventions used in this manual
To highlight key information in this manual, some text are presented
as follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that
can help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing certain tasks and
prevent damage to your PC's data and components.
Typography
Bold text Indicates a menu or an item to select.
Italic
This indicates sections that you can refer
to in this manual.
E410
7
English
Safety information
Your EeeBox PC is designed and tested to meet the latest standards
of safety for information technology equipment. However, to
ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Readandfollowallinstructionsinthedocumentationbeforeyou
operate your system.
• Donotusethisproductnearwateroraheatedsourcesuchasa
radiator.
• Setupthesystemonastablesurfacewiththeprovidedstand.
Never use the system alone without the stand.
• Openingsonthechassisareforventilation.Donotblockorcover
these openings. Make sure you leave plenty of space around the
system for ventilation. Never insert objects of any kind into the
ventilation openings.
• Usethisproductinenvironmentswithambienttemperatures
between 0˚C and 35˚C.
• Ifyouuseanextensioncord,makesurethatthetotalampere
rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
• Donotwalkonthepowercordorallowanythingtorestonit.
• Donotspillwateroranyotherliquidsonyoursystem.
• Whenthesystemisturnedo,asmallamountofelectrical
current still ows. Always unplug all power, modem, and network
cables from the power outlets before cleaning the system.
• Ifyouencounterthefollowingtechnicalproblemswiththe
product, unplug the power cord and contact a qualied service
technician or your retailer.
• Thepowercordorplugisdamaged.
8
E410
English
• Liquidhasbeenspilledintothesystem.
• Thesystemdoesnotfunctionproperlyevenifyoufollow
the operating instructions.
• Thesystemwasdroppedorthecabinetisdamaged.
• Thesystemperformancechanges.
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
LASER PRODUCT WARNING
CLASS 1 LASER PRODUCT
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
DO NOT throw the PC in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment, and mercury-containing button
cell battery) should not be placed in municipal waste. Check local
technical support services for product recycling.
E410
9
English
Package contents
NOTES:
• Actualproductspecicationsmayvarywithterritories.
• Ifthedeviceoritscomponentsfailormalfunctionduring
normal and proper use within the warranty period, bring the
warranty card to the ASUS Service Center for replacement of
the defective components.
E410 AC adapter Power cord
Antenna Warranty card Quick Installation
Guide (QIG)
1
2
Stand (optional) VESA mount and screw
pack (optional)
Keyboard / Mouse
(optional)
X
10
E410
English
X
Chapter 1: Hardware Setup
Getting to know your PC
Front view
Memory card slot
The built-in memory card reader enables your PC to read
and write data to and from MMC/SD/SDHC/SDXC cards.
Power switch
The power switch allows powering ON and OFF the system.
E410
11
English
BIOS key
Before booting up the system, insert a straightened paper
clip into this hole to enter the BIOS.
USB 3.0 ports
These USB (Universal Serial Bus) ports provide a transfer
rate of up to 5 Gbit/s and are backward compatible with
USB 2.0.
USB 2.0 ports
The USB (Universal Serial Bus) 2.0 ports are compatible
with USB 2.0/1.1 devices such as keyboards, mouse
devices, cameras, and hard disk drives. USB allows many
devices to run simultaneously on a single computer, with
some peripheral acting as additional plug-in sites or hubs.
Microphone jack
The microphone jack is designed to connect the
microphone used for video conferencing, voice narrations,
or simple audio recordings.
Headphone jack
The stereo headphone jack (3.5mm) is used to connect
the system’s audio out signal to amplied speakers or
headphones.
12
E410
English
Rear view
Wireless antenna jack
The jack is used to connect the supplied wireless antenna
to enhance wireless signal reception.
E410
13
English
HDMI port
The HDMI (High Denition Multimedia Interface) port
supports a Full-HD device such as an LCD TV or monitor to
allow viewing on a larger external display.
Serial Port (COM Port)
The 9-pin D-sub serial port supports native serial devices
such as a serial drawing tablets, serial mouse, or serial
modem.
LAN(RJ-45) port
The eight-pin RJ-45 LAN port supports a standard Ethernet
cable for connection to a local network.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-
compatible device such as a monitor or projector to allow
viewing on a larger external display.
Power input (DC 19V)
The supplied power adapter converts AC power to DC
power for use with this jack. Power supplied through this
jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
WARNING! The power adapter may become warm to hot when in
use. Do not cover the adapter and keep it away from your body.
Kensington® lock port
The Kensington® lock port allows you to secure your PC
using Kensington® compatible PC security products.
14
E410
English
Chapter 2: Using your PC
Positioning your PC
Mounting your PC on the stand
To mount your PC on the stand:
1. Locate the mounting hole at the bottom of your PC.
2. Align the stand’s mounting hole with the mounting hole on
your PC, then secure it in place with the stand screw.
IMPORTANT! Ensure that your PC is mounted on its stand before
placing it on a stable and at surface.
stand screw
X
E410
15
English
Installing your PC to a monitor
To install your PC to a monitor:
1. Secure the VESA mount to your monitor* with four screws
bundled with your VESA mount kit.
NOTE: Your monitor must comply with VESA75 or VESA100 standard.
* The PC can be mounted on an ASUS VS228H monitor.
16
E410
English
2. Align and place your PC into the VESA mount as shown.
NOTE: Ensure that the ASUS trademark on the rotation wheel of the
VESA mount is set to its customary position when putting in the PC so
that the machine can rotate properly.
ASUS trademark
PC VESA mount
E410
17
English
3. Secure the PC and the VESA mount assembly with a stand
screw. Ensure that the PC is rmly attached to the VESA mount.
NOTE: Use the stand screw bundled with the stand.
stand screw
PC and VESA mount assembly
18
E410
English
4. To adjust the angle of the PC and VESA mount assembly to
make the PC’s front and rear more accessible, press the lever
switch of the VESA mount to unlock the rotation wheel (A) then
rotate the PC and VESA mount assembly accordingly (B).
IMPORTANT!
• Settherotationwheeluprightwhenthesystemisinuse.
• PleasetakenoteofthecablesconnectedtothePCwhile
operating the rotation wheel. To prevent hazards from
loosened cables, the wheel is designed to rotate no more
than 90° clock/ counterclock-wise.
A
A
B
rotation wheel
PC and VESA mount assembly
lever switch
E410
19
English
Using your PC
Connecting to an external display
Connect one end of an HDMI or a VGA cable to an external display,
and the other end of the cable to your PC’s HDMI or VGA port.
Connecting to a USB device
Connect USB devices like wired/wireless keyboards, mouse devices,
and printers to the USB ports on your PC.
NOTE: The keyboard varies with country or region.
X
20
E410
English
Connecting the wireless antenna
Connect the wireless antenna to your PC to enhance the wireless
signal. Ensure that the wireless antenna is in an upright position (90
o
angle) to get the best wireless reception.
E410
21
English
Turning on your PC
NOTES:
• WhenyourPCisnotinuse,unplugthepoweradapteror
switchothepowerbuttontosaveonpowerconsumption.
• AdjustthepowermanagementsettingsintheWindow®
Control Panel. This is to ensure that your PC is set to a low
power consumption mode and is fully operational at the
same time.
X
22
E410
English
Conguring the audio output via an HDMI device
If you want to use a high-denition TV as an audio output device,
connect it to the Home Theater PC and follow the steps below to
congure the audio settings.
To congure the audio output via an HDMI device:
1. Do any of the following based on your PC’s operating system.
On Windows® 7
Right-click the Volume
Mixer icon on the Windows®
notication area and click Playback devices.
On Windows® 8.1
a. From the Start screen, click Desktop to launch the Desktop
Mode.
NOTE: For more details, refer to the section Start screen under Using
Windows® 8.1.
b. Right-click the Volume Mixer
icon on the Windows® taskbar
and click Playback devices.
Volume Mixer
Volume Mixer
E410
23
English
4. Select Stereo and click
Next.
2. From the Playback screen,
select Digital Audio
(HDMI).
3. Click Congure and the
Speaker Setup window
pops up.
5. Tick the Front left and
right option, and click
Next.
6. Click Finish to exit the
speaker setup.
24
E410
English
NOTE:
For more information on how to update/upgrade to Windows 8.1:
• IfyouarerunningWindows® 7, visit http://www.windows.
microsoft.com/en-us/windows-8/upgrade-to-windows-8
• If you are running Windows® 8, visit http://www.windows.
microsoft.com/en-us/windows-8/update-from-windows-8-
tutorial
Chapter 3: Working with
Windows® 8.1
NOTE: The operating system varies with country or region.
System requirements
To facilitate a smoother transition from your previous operating
system, read the system requirements below before upgrading to
Windows® 8.1:
Processor
1GHz or faster
RAM
1GB (32-bit) or 2 GB (64-bit)
Hard disk space
16 GB (32-bit) or 20 GB (64-bit)
Graphics card
Microsoft DirectX9 graphics device with
WDDM driver
Screen resolution
1024 x 768 for Windows® apps
E410
25
English
Starting for the rst time
When you start your computer for the rst time, a series of screens
appear to guide you in conguring the basic settings of your
Windows® 8.1 operating system.
To start for the rst time:
1. Turn your computer on. Wait for a few minutes until the setup
screen appears.
2. Carefully read the license terms. Tick I accept the license terms
for using Windows and click Accept.
3. Follow the next onscreen instructions to congure the following
basic items:
•Personalize
•Wireless
•Settings
•SignintoyourPC
4. Once you are done conguring the basic items, the
Windows® 8.1 video tutorial appears. Watch this tutorial to learn
more about Windows
®
8.1 functionalities.
5. The Start screen appears after successfully signing in to your
user account.
Windows
®
8.1 lock screen
The Windows® 8.1 lock screen may appear when your PC enters the
Windows® 8.1 operating system. To proceed, tap on the lock screen
or press any key on your PC 's keyboard.
26
E410
English
Windows
®
UI
The Windows® User interface (UI) is the tile-based display used in
Windows® 8.1. It includes the following features you can use while
working on your PC.
Start Screen
The Start Screen appears after successfully signing in to your user
account. It helps organize all the programs and applications you
need in just one place.
NOTE: Actual apps shown onscreen may vary per model. The
following screenshot is for reference only.
Windows® apps
These are apps pinned on the Start screen and displayed on tiled-
format for easy access.
NOTE: Some apps require signing in to your Microsoft account before
they are fully launched.
E410
27
English
Hotspots on the Start screen
Hotspots
Onscreen hotspots allow you to launch programs and access the
settings of your PC. The functions in these hotspots can be activated
using your mouse.
Hotspots on a running app
28
E410
English
Hotspot Action
upper left corner Hover your mouse pointer then tap on the
recent app’s thumbnail to revert back to that
running app.
If you launched more than one app, slide down
to show all running apps.
lower left corner From a running app screen:
Hover your mouse pointer then click to go
back to the Start screen.
NOTE: You can also press the Windows
key on your keyboard to go back to
the Start screen.
From the Start screen:
Hover your mouse pointer then click to go
back to that app.
top Hover your mouse pointer until it changes to
a hand icon. Drag then drop the app to a new
location.
NOTE: This hotspot function only works
on a running app or when you want to use
the Snap feature. For more details, refer to
Snap feature under Working with Windows®
apps.
upper and lower
right corner
Hover your mouse pointer to launch the Charms
bar.
E410
29
English
Start button
Windows® 8.1 features the Start button which allows you to switch
between the two most recent apps you opened. The Start button
may be accessed from the Start screen, while on Desktop mode, and
on any app that is currently open onscreen.
Start button on the Start screen
NOTE: The actual color of your Start button varies depending on the
display settings you chose for your Start screen.
Hover your mouse pointer over the left corner of your Start screen or any opened app
to call out the Start button.
30
E410
English
Context menu
The context menu appears as a box lled with quick access to some
of the programs inside Windows® 8.1 when you right-click on the
Start button.
The context menu also includes the following shut down options for
your PC: sign out, sleep, shut down, restart.
Start button on Desktop mode
E410
31
English
Customizing your Start screen
Windows® 8.1 enables you to customize your Start screen, allowing
you to boot directly to the Desktop mode and customize the
arrangement of your apps onscreen.
To customize the settings of your Start screen:
1. Launch the Desktop.
2. Right-click anywhere on the taskbar, except on the Start button,
to launch the Taskbar and Navigation properties window.
3. Select the Navigation tab then tick the options you want to
use.
4. Click Apply to save the new settings then exit.
32
E410
English
Working with Windows
®
apps
Use your PC’s keyboard or mouse to launch and customize your
apps.
Launching apps
• Usingyourmouse,positionthemousepointeronanappthen
left-click once to launch it.
• Using your keyboard, press until an app is selected then
use the arrow keys to browse through the apps. Press
to launch your selected app.
Customizing apps from the Start screen
You can move, resize, or unpin apps from the Start screen using the
following steps.
Moving apps
To move an app, point and drag it to a new location.
Resizing apps
Right-click the app to activate its settings bar then tap and
select an app tile size.
Unpinning apps
To unpin an app from the Start screen, right-click on the app to
activate its settings bar then tap .
E410
33
English
Closing apps
• Movethemousepointeronthetopsideofthelaunchedapp
then wait for the pointer to change to a hand icon. Drag then
drop the app to the bottom of the screen to close it.
• From the running app’s screen, press .
Accessing the Apps screen
Aside from the apps already pinned on your Start screen, you can
also open other applications through the Apps screen.
NOTE: Actual apps shown onscreen may vary per model. The
following screenshot is for reference only.
Horizontal scroll bar
34
E410
English
Launching the Apps screen
Launch the Apps screen using a mouse or a keyboard.
Using your mouse, click the button.
Using your keyboard, from the Start screen, press ,
then press .
Pinning more apps on the Start screen
1. Launch the All Apps screen.
2. Right-click on the apps that you want to pin on the Start screen.
3. Click on the icon to pin the selected apps on the Start
screen.
E410
35
English
Charms bar
The Charms bar is a toolbar that can be triggered on the right side
of your screen. It consists of several tools that allow you to share
applications and provide quick access for customizing the settings
of your PC.
Launching the Charms bar
NOTE: When called out, the Charms bar initially appears as a set of
white icons. The image above shows how the Charms bar looks like
once activated.
Use your PC’s mouse or keyboard to launch the Charms bar:
• Moveyourmousepointerontheupperorlowerrightcornerof
the screen.
• Press .
Charms Bar
36
E410
English
Search
This tool allows you to look for les, applications, or
programs in your PC.
Share
This tool allows you to share applications via social
networking sites or email.
Start
This tool reverts the display back to the Start screen. From
the Start screen, you can also use this to revert back to a
recently opened app.
Devices
This tool allows you to access and share les with the
devices attached to your PC such as an external display or
printer.
Settings
This tool allows you to access the PC settings of your PC.
Inside the Charms bar
E410
37
English
Snap feature
The Snap feature displays two apps side-by-side, allowing you to
work or switch between apps.
Using Snap
Perform the following steps to activate Snap using your PC’s mouse
or keyboard.
Using your mouse
1. Launch the app you wish to snap.
2. Hover the mouse point on the top side of your screen.
3. Once the pointer changes to a hand icon, drag then drop
the app to the left or right side of the display panel.
4. Launch another app. This app is automatically placed on the
available pane.
Snap bar
38
E410
English
Using your keyboard
1. Launch the app you wish to snap.
2. Press and the left or right arrow key to snap the app
to the left or right pane.
3. Launch another app. This app is automatically placed on the
available pane.
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help
you launch applications and navigate Windows®8.1.
\
Switches between the Start screen and the last
running app
Launches the desktop
Launches the This PC window on Desktop mode
Opens the File option from the Search charm
Opens the Share charm
Opens the Settings charm
E410
39
English
Activates the Lock screen
Minimizes all currently active windows
Launches the Project pane
Opens the Everywhere option from the Search
charm
Opens the Run window
Opens Ease of Access Center
Opens the Settings option from the Search charm
Opens a context menu of the Start button
Launches the magnier icon and zooms in your screen
Zooms out your screen
Opens the Narrator Settings
40
E410
English
Turning your PC off
You can shut down your PC by doing either of the following
procedures:
• Hoveronthelowerleftcornerofyourscreentolaunchthe
Start Button, then right-click on it. In the context menu, select
Shutdown or signout > Shut down.
• Click from the Charms bar then click > Shut down to
do a normal shutdown.
• Fromthelog-inscreen,click > Shut down.
• IfyourPCisunresponsive,pressandholdthepowerbuttonfor
atleastfour(4)secondsuntilyourPCturnso.
• ToshutdownyourPCusingDesktopmode,launchthedesktop
then press alt + f4 to launch the Shut Down window. Select
Shut Down from the drop-down list then select OK.
Putting your PC to sleep
You activate sleep mode on your PC using the following procedures.
• Press the Power button once.
• ToputyourPCtosleepmodeusingDesktopmode,launchthe
desktop then press alt + f4 to launch the Shut Down window.
Select Sleep from the drop-down list then select OK.
E410
41
English
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the PC.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
• Anerrormessageappearsonthescreenduringthesystem
bootup and requests you to run the BIOS Setup.
• Youhaveinstalledanewsystemcomponentthatrequiresfurther
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
42
E410
English
Quickly enter the BIOS
To access the BIOS before the PC boots into the OS, try any of the
following:
• Beforebootingupthesystem,insertastraightenedpaperclip
into the BIOS key.
• Pressthepowerbuttonforatleastfoursecondstoshutdown
your PC, then press the power button again to turn your PC back
on, and press <F2> during POST.
• WhenyourPCiso,disconnectthepowercordfromyourPC’s
power connector. Reconnect the power cord and press the
power button to turn on your PC. Press <F2> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
X
BIOS key
E410
43
English
Chapter 4: Connecting to the
Internet
Access emails, surf the Internet, and share applications via social
networking sites on or from your PC using wireless/Wi-Fi or wired
connection.
Connecting on Windows
®
7
Wireless connection
1. Click the wireless network icon in the Windows® notication
area.
WARNING! For security concerns, DO NOT connect to an unsecured
network.
2. Select the wireless access point you
want to connect to from the list and click
Connect to build the connection.
3. When connecting, you may have to enter a password.
4. After a connection has been established, the connection is
shown on the list.
5. You can see the wireless network icon in the Notication
area.
NOTES: If you cannot nd the desired
access point, click the Refresh icon
on the upper right corner to refresh and
search in the list again.
44
E410
English
2. Congure a dynamic IP/PPPoE or static IP network connection.
NOTE: For more details, refer to the next sections.
Wired connection
1. Use a network (RJ-45) cable to connect your PC to a DSL/cable
modem or a local area network (LAN).
DSL/Cable Modem
LAN
Modem
RJ-45 cable
X
RJ-45 cable LAN
X
E410
45
English
Conguring an IP / PPPoE network connection
To congure your IP/PPPoE network connection:
1. Click the network icon in the
Windows® Notication area and
select Open Network and Sharing
Center.
2. Click Change adapter
settings in the left blue
pane.
3. Right-click Local Area
Connection and select
Properties.
46
E410
English
4. Click Internet Protocol
Version 4(TCP/IPv4) and
click Properties.
5. Congure the type of IP address for network conguration.
To congure using a dynamic IP address:
a. Click Obtain an IP
address automatically
and click OK.
b. Proceed to Step 6 if
you are using PPPoE
connection.
E410
47
English
7. Select Connect to the
Internet and click Next.
6. Return to the Network
and Sharing Center and
then click Set up a new
connection or network.
To congure using a static IP address:
a. Click Use the following IP
address.
b. Enter the IP address,
Subnet mask and Gateway
from your service provider.
c. If needed, enter the
preferred DNS Server
address and alternative
address.
d. When done, click OK.
8. Select Broadband (PPPoE)
and click Next.
48
E410
English
10. Click Close to nish the
conguration.
11. Click the network icon in the
taskbar and click the connection
you just created.
12. Enter your user name and password.
Click Connect to connect to the
Internet.
9. Enter your User name and,
Password, and Connection
name. Click Connect.
E410
49
English
Connecting on Windows
®
8.1
Wi-Fi connection
1. Launch the Charms bar.
NOTE: For details, refer to the section Charms bar under Working with
Windows® apps.
2. From the Charms bar, click and click the .
3. Select a wireless network from the list of available Wi-Fi
connections.
4. Click Connect to start the network connection.
NOTE: You may be prompted to enter a security key to connect to a
secured wireless network.
5. (Optional) To enable sharing between your PC and other
wireless-enabled systems, click Yes . Click No if you do not want
to enable the sharing function.
50
E410
English
DSL/Cable Modem
LAN
Wired connection
You can connect your PC to a local area network (LAN) or broadband
Internet connection using a network cable.
To connect your PC to a LAN connection using a network cable:
1. Connect one end of the network cable (RJ-45) to your PC’s LAN
port and the other end to the DSL/cable modem or a local area
network (LAN) port.
2. Launch the Desktop.
3. From the Windows® taskbar, right-click the network icon
then click Open Network and Sharing Center.
4. In the Network and Sharing Center window, click Change
adapter settings.
Modem
RJ-45 cable
X
RJ-45 cable LAN
X
E410
51
English
5. Right-click on the LAN controller then select Properties.
6. Click Internet Protocol Version 4(TCP/IPv4) then click
Properties.
7. Congure the type of IP address for network conguration.
To congure using a dynamic IP address:
a. Click Obtain an IP address automatically then click OK.
b. Proceed to step 8.
To congure using a static IP address:
a. Click Use the following IP address.
b. Type the IP address, Subnet mask and Default gateway from
your service provider.
c. If needed, you can also type the preferred DNS server
address and alternate DNS server address then click OK.
d. Proceed to step 8.
8. Return to the Network and Sharing Center window then click
Set up a new connection or network.
9. Select Connect to the Internet then click Next.
10. Click Broadband (PPPoE).
11. Key-in your User name, Password, and Connection name then
click Connect.
12. Click Close to nish the conguration.
13. Click on the taskbar then click the connection you just
created.
14. Key-in your user name and password then click Connect to start
connecting to the Internet.
52
E410
English
Chapter 5: Recovering your
system
Recovery options on Windows
®
7
Using the Recovery Partition
The Recovery Partition quickly restores your PC’s software to its
original working state. Before using the Recovery Partition, copy
your data les (such as Outlook PST les) to USB storage devices or
to a network drive and make note of any customized conguration
settings (such as network settings).
The Recovery Partition is a reserved space on your hard disk drive
used to restore the operating system, drivers, and utilities installed
on your PC at the factory.
Recovering the OS to the factory default partition (F9
Recovery)
WARNING! DO NOT delete the partition named “RECOVERY.” The
recovery partition is created at the factory and cannot be restored by
the user if deleted. Take your system to an authorized ASUS service
center if you have problems with the recovery process.
To recover the OS to the factory default partition (F9 Recovery):
1. Press <F9> during bootup.
2. Select Windows setup [EMS Enabled] when this item appears
and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. The factory default partition will be displayed. Click Next.
E410
53
English
6. Data on the default partition will be cleared. Click Recover to
start the system recovery.
NOTE: You will lose all your data on the selected partition. Ensure that
you back up your important data.
7. When the recovery is completed successfully, click Reboot to
restart the system.
Backing up the factory default environment data to a USB
drive (F9 Backup)
To back up the factory default environment data to a USB drive
(F9 Backup):
1. Press <F9> during bootup.
2. Select Windows setup [EMS Enabled] when this item appears
and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. Select Backup the Factory Environment to a USB Drive and
click Next.
6. Connect a USB storage device to your PC to start the Factory
Default Environment backup.
NOTE: The required size of the connected USB storage device should
be larger than 15GB. The actual size may vary with your PC model.
54
E410
English
7. Select a desired USB storage device if more than one USB
storage device is connected to your EeeTop PC/EeeBox PC and
click Next.
NOTE: If there is already a partition with proper size in the selected
USB storage device (for example, a partition that has been used as the
backup partition), the system will show this partiton automatically
and reuse it for backup.
8. Basedonthedierentsituationsinthepreviousstep,dataon
the selected USB storage device or on the selected partition will
be cleared. Click Backup to start backup.
NOTE: You will lose all your data on the selected USB storage device
or on the selected partition. Ensure that you back up your important
data.
9. When the back up is completed successfully, click Reboot to
restart the system.
Removing everything and reinstalling Windows
The Remove everything and reinstall Windows option in PC
Settings restores your PC to its original factory settings. To do this:
IMPORTANT! Back up all your data before using this option.
NOTE: This process may take a while to complete.
1. Launch the Charms bar.
2. Click Settings > Change PC Settings > Update and Recovery
> Recovery.
3. From the Remove everything and reinstall Windows option,
click Get Started.
4. Follow the onscreen instructions to complete the reinstallation
and reset process.
Recovery options on Windows
®
8.1
E410
55
English
A ppendices
Notices
REACH
Complying with the REACH (Registration, Evaluation, Authorization,
and Restriction of Chemicals) regulatory framework, we publish
the chemical substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm
forthedetailedrecyclinginformationindierentregions.
COATING NOTICE
IMPORTANT! To provide electrical insulation and maintain electrical
safety, a coating is applied to insulate the device except on the areas
where the I/O ports are located.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincluding
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
56
E410
English
radio or television reception, which can be determined by turning
theequipmentoandon,theuserisencouragedtotrytocorrect
the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdierentfrom
that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
CAUTION: Any changes or modications not expressly approved by
the grantee of this device could void the user’s authority to operate
the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure
compliance.
Declaration of Conformity (R&TTE directive 1999/5/EC)
The following items were completed and are considered relevant
and sucient:
• Essentialrequirementsasin[Article3]
• Protectionrequirementsforhealthandsafetyasin[Article3.1a]
• Testingforelectricsafetyaccordingto[EN60950]
• Protectionrequirementsforelectromagneticcompatibilityin
[Article 3.1b]
• Testingforelectromagneticcompatibilityaccordingto[EN301
489-1] & [EN 301 489-17]
• Eectiveuseoftheradiospectrumasin[Article3.2]
• Radiotestsuitesaccordingto[EN300328]
E410
57
English
France Restricted Wireless Frequency Bands
Some areas of France have a restricted frequency band. The worst
case maximum authorized power indoors are:
• 10mWfortheentire2.4GHzband(2400MHz–2483.5MHz)
• 100mWforfrequenciesbetween2446.5MHzand2483.5MHz
NOTE: Channels 10 through 13 inclusive operate in the band 2446.6
MHz to 2483.5 MHz.
There are few possibilities for outdoor use: On private property or on
the private property of public persons, use is subject to a preliminary
authorization procedure by the Ministry of Defense, with maximum
authorizedpowerof100mWinthe2446.5–2483.5MHzband.Use
outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
• Maximumauthorizedpowerindoorsis100mW
• Maximumauthorizedpoweroutdoorsis10mW
Departmentsinwhichtheuseofthe2400–2483.5MHzbandis
permitted with an EIRP of less than 100mW indoors and less than
10mW outdoors:
01 Ain 02 Aisne 03 Allier
05 Hautes Alpes 08 Ardennes 09 Ariège
11 Aude 12 Aveyron 16 Charente
24 Dordogne 25 Doubs 26 Drôme
32 Gers 36 Indre 37 Indre et Loire
41 Loir et Cher 45 Loiret 50 Manche
55 Meuse 58 Nièvre 59 Nord
60 Oise 61 Orne 63 Puy du Dôme
64 Pyrénées Atlantique 66 Pyrénées Orientales 67 Bas Rhin
68 Haut Rhin 70 Haute Saône 71 Saône et Loire
75 Haute Saône 82 Tarn et Garonne 84 Vaucluse
88 Vosges 89 Yonne 90 Territoire de
Belfort
94 Val de Marne
58
E410
English
This requirement is likely to change over time, allowing you to use
your wireless LAN card in more areas within France. Please check
with ART for the latest information (www.art-telecom.fr)
NOTE: Your WLAN Card transmits less than 100mW, but more than
10mW.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
IC Radiation Exposure Statement for Canada
This equipment complies with IC radiation exposure limits set forth
for an uncontrolled environment. To maintain compliance with IC
RF exposure compliance requirements, please avoid direct contact
to the transmitting antenna during transmitting. End users must
follow the specic operating instructions for satisfying RF exposure
compliance.
Operation is subject to the following two conditions:
• Thisdevicemaynotcauseinterferenceand
• Thisdevicemustacceptanyinterference,includinginterference
that may cause undesired operation of the device.
Canada, avis d’Industry Canada (IC)
Cet appareil numerique de classe B est conforme aux normes
canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes:
1) cet appareil ne doit pas causer d’interference et 2) cet appareil
doit accepter toute interference, notamment les interferences qui
peuventaectersonfonctionnement.
E410
59
English
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the
Industry Canada (IC) radio frequency exposure limits. The Wireless
Device should be used in such a manner such that the potential for
human contact during normal operation is minized.
This device has also been evaluated and shown compliant with the
IC RF Exposure limits under mobile exposure conditions. (antennas
are greater than 20cm from a person’s body).
CE Mark Warning
This is a Class B product, in a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
CE marking for devices without wireless LAN/Bluetooth
The shipped version of this device complies with the requirements
of the EEC directives 2004/108/EC “Electromagnetic compatibility”
and 2006/95/EC “Low voltage directive”.
CE marking for devices with wireless LAN/ Bluetooth
This equipment complies with the requirements of Directive 1999/5/
EC of the European Parliament and Commission from 9 March, 1999
governing Radio and Telecommunications Equipment and mutual
recognition of conformity.
is for class II device.
Wireless Operation Channel for Dierent Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
60
E410
English
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money
and protect the environment through energy
ecient products and practices.
All ASUS products with the ENERGY STAR logo
comply with the ENERGY STAR standard, and the
power management feature is enabled by default. The monitor and
computer are automatically set to sleep after 15 and 30 minutes of
user inactivity. To wake your computer, click the mouse or press any
key on the keyboard.
Please visit http://www.energy.gov/powermanagement for
detail information on power management and its benets to the
environment. In addition, please visit http://www.energystar.gov for
detail information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based
products.
E410
61
English
Address 4th Fl., 150 Li-Te Road, Peitou, Taipei, Taiwan
11259
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
E-mail info@asus.com.tw
Website www.asus.com.tw
Technical Support
Telephone 0800-093-456
Online support support.asus.com
ASUS Contact Information
ASUSTeK COMPUTER INC.
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Fax +1-510-608-4555
Website usa.asus.com
Technical Support
Telephone +1-812-282-2787
Online support support.asus.com
62
E410
English
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax +49-2102-959911
Website www.asus.de
Technical Support
Telephone +49-1805-010923
Support Fax +49-2102-9599-11
Online support support.asus.com