Table of Contents
- About this manual
- Chapter 1: Hardware Setup
- Chapter 2: Using your PC
- Chapter 3: Working with Windows® 7
- Chapter 4: Working with Windows® 8.1
- Chapter 5: Working with Windows® 10
- Chapter 6: Connecting to the Internet
- Chapter 7: Recovering your system
- Appendices
ASUS E410-B029A User Manual
Displayed below is the user manual for E410-B029A by ASUS which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
English
Mini Desktop PC
User Guide
E410
E13176
Revised Edition V4
June 2017
English
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN
IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identication or
explanation and to the owners’ benet, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you
are entitled to recover damages from ASUS. In each such instance, regardless of the basis
on which you are entitled to claim damages from ASUS, ASUS is liable for no more than
damages for bodily injury (including death) and damage to real property and tangible
personal property; or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed contract price of each
product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in
contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its
suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at https://www.asus.com/support
E410
3
English
Contents
About this manual ............................................................................................. 6
Conventions used in this manual ............................................................... 7
Safety information ............................................................................................. 8
Setting up your system................................................................................... 8
Care during use ................................................................................................. 8
Package contents .............................................................................................10
Chapter 1: Hardware Setup
Getting to know your PC ...............................................................................11
Front view .......................................................................................................... 11
Rear view ...........................................................................................................13
Chapter 2: Using your PC
Positioning your PC .........................................................................................15
Mounting your PC on the stand ................................................................15
Installing your PC to a monitor ..................................................................16
Using your PC ....................................................................................................20
Connecting to an external display ...........................................................20
Connecting to a USB device .......................................................................20
Connecting the wireless antenna (optional) ........................................21
Turning on your PC ........................................................................................22
Configuring the audio output via an HDMI device ............................23
Keyboard shortcuts .........................................................................................25
Chapter 3: Working with Windows® 7
Starting for the first time ...............................................................................27
Using the Start menu ....................................................................................28
Using the taskbar ............................................................................................29
Using the notification area ..........................................................................30
Using Windows® Explorer............................................................................31
Backing up files ...............................................................................................33
Restoring your system settings .................................................................33
Using Windows® 7 Action Center .............................................................34
Using Windows® Update .............................................................................34
Setting up a user account and password ..............................................35
Using Windows® Help and Support ........................................................35
4
E410
English
Contents
Chapter 4: Working with Windows® 8.1
System requirements ......................................................................................37
Starting for the first time ...............................................................................38
Windows® 8.1 lock screen .............................................................................38
Windows® UI ......................................................................................................39
Start Screen.......................................................................................................39
Windows® apps ...............................................................................................39
Start button ......................................................................................................42
Customizing your Start screen ...................................................................44
Working with Windows® apps .....................................................................45
Launching apps ............................................................................................... 45
Customizing apps from the Start screen................................................45
Accessing the Apps screen..........................................................................46
Charms bar ........................................................................................................ 48
Snap feature .....................................................................................................50
Other keyboard shortcuts .............................................................................51
Turning your PC off ..........................................................................................53
Putting your PC to sleep ................................................................................53
Entering the BIOS Setup ................................................................................54
Quickly enter the BIOS .................................................................................. 55
Chapter 5: Working with Windows® 10
Starting for the first time ...............................................................................57
Using the Windows® 10 UI ............................................................................58
Start menu .......................................................................................................... 59
Pinning apps to the Start screen or taskbar ..........................................59
Start screen .........................................................................................................60
Moving apps on the Start screen .............................................................. 60
Unpinning apps from the Start screen ...................................................60
Taskbar ................................................................................................................. 61
Unpinning apps from the taskbar ............................................................61
Using the Task View .......................................................................................61
E410
5
English
Contents
Snap feature ....................................................................................................... 62
Using Snap ........................................................................................................62
Using your mouse ..........................................................................................62
Using your keyboard .....................................................................................62
Chapter 6: Connecting to the Internet
Connecting on Windows® 7 .........................................................................63
Wireless connection ......................................................................................63
Wired connection ...........................................................................................64
Connecting on Windows® 8.1 ......................................................................67
Wi-Fi connection ............................................................................................. 67
Wired connection ..........................................................................................68
Connecting on Windows® 10 .......................................................................70
Wi-Fi connection ............................................................................................. 70
Wired connection ...........................................................................................71
Chapter 7: Recovering your system
Recovery options on Windows® 7...............................................................75
Using the Recovery Partition ..................................................................... 75
Recovery options on Windows® 8.1 ...........................................................78
Removing everything and reinstalling Windows ................................78
Recovery options on Windows® 10 ............................................................79
Removing everything and reinstalling Windows® ..............................79
Appendices
Regulatory notices ...........................................................................................81
ASUS contact information ............................................................................86
6
E410
English
About this manual
This manual provides information about the hardware and software
features of your PC, organized through the following chapters:
Chapter 1: Hardware Setup
This chapter details the hardware components of your PC.
Chapter 2: Using your PC
This chapter provides you with information on using your PC.
Chapter 3: Working with Windows® 7
This chapter provides an overview of using Windows® 7 in your
PC.
Chapter 4: Working with Windows® 8.1
This chapter provides an overview of using Windows® 8.1 in
your PC.
Chapter 5: Working with Windows® 10
This chapter provides an overview of using Windows® 10 in your
PC.
Chapter 6: Connecting to the Internet
This chapter provides information on connecting your PC to a
wired or Wi-Fi network.
Chapter 7: Recovering your system
This chapter provides recovery options for your PC.
Appendices
This section includes notices and safety statements for your PC.
NOTE: For Windows® 8.1 OS, the user manual is located in the
following folder in your PC: C:\Program Files(X86)\ASUS\eManual
E410
7
English
Conventions used in this manual
To highlight key information in this manual, some text are presented
as follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that
can help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing certain tasks and
prevent damage to your PC's data and components.
Typography
Bold text Indicates a menu or an item to select.
Italic
This indicates sections that you can refer
to in this manual.
8
E410
English
Safety information
Your EeeBox PC is designed and tested to meet the latest standards
of safety for information technology equipment. However, to
ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Readandfollowallinstructionsinthedocumentationbeforeyou
operate your system.
• Donotusethisproductnearwateroraheatedsourcesuchasa
radiator.
• Setupthesystemonastablesurfacewiththeprovidedstand.
Never use the system alone without the stand.
• Openingsonthechassisareforventilation.Donotblockorcover
these openings. Make sure you leave plenty of space around the
system for ventilation. Never insert objects of any kind into the
ventilation openings.
• Usethisproductinenvironmentswithambienttemperatures
between 0°C and 35°C.
• Ifyouuseanextensioncord,makesurethatthetotalampere
rating of the devices plugged into the extension cord does not
exceed its ampere rating.
• Thisequipmentshouldbeinstalledandoperatedwitha
minimum distance of 20cm between the radiator and your body.
Care during use
• Donotwalkonthepowercordorallowanythingtorestonit.
• Donotspillwateroranyotherliquidsonyoursystem.
• Whenthesystemisturnedo,asmallamountofelectrical
current still ows. Always unplug all power, modem, and network
cables from the power outlets before cleaning the system.
E410
9
English
• Ifyouencounterthefollowingtechnicalproblemswiththe
product, unplug the power cord and contact a qualied service
technician or your retailer.
• Thepowercordorplugisdamaged.
• Liquidhasbeenspilledintothesystem.
• Thesystemdoesnotfunctionproperlyevenifyoufollow
the operating instructions.
• Thesystemwasdroppedorthecabinetisdamaged.
• Thesystemperformancechanges.
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
DO NOT throw the PC in municipal waste. This product has been
designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment, and mercury-containing button
cell battery) should not be placed in municipal waste. Check local
technical support services for product recycling.
CLASS 1 LASER PRODUCT
10
E410
English
Package contents
NOTES:
• Actualproductspecicationsmayvarywithterritories.
• Ifthedeviceoritscomponentsfailormalfunctionduring
normal and proper use within the warranty period, bring the
warranty card to the ASUS Service Center for replacement of
the defective components.
E410 AC adapter Power cord
Antenna
(optional) Warranty card Quick Installation Guide
(QIG)
1
2
Stand (optional) VESA mount and screw
pack (optional)
Keyboard / Mouse
(optional)
X
E410
11
English
X
Chapter 1: Hardware Setup
Getting to know your PC
Front view
Memory card slot
The built-in memory card reader enables your PC to read
and write data to and from MMC/SD/SDHC/SDXC cards.
Power switch
The power switch allows powering ON and OFF the system.
12
E410
English
BIOS key
Before booting up the system, insert a straightened paper
clip into this hole to enter the BIOS.
USB 3.0 ports
These USB (Universal Serial Bus) ports provide a transfer
rate of up to 5 Gbit/s and are backward compatible with
USB 2.0.
USB 2.0 ports
The USB (Universal Serial Bus) 2.0 ports are compatible
with USB 2.0/1.1 devices such as keyboards, mouse devices,
cameras, and hard disk drives. USB allows many devices
to run simultaneously on a single computer, with some
peripheral acting as additional plug-in sites or hubs.
Microphone jack
The microphone jack is designed to connect the
microphone used for video conferencing, voice narrations,
or simple audio recordings.
Headphone jack
The stereo headphone jack (3.5mm) is used to connect
the system’s audio out signal to amplied speakers or
headphones.
E410
13
English
Rear view
Wireless antenna jack (optional)
The jack is used to connect the supplied wireless antenna
to enhance wireless signal reception.
14
E410
English
HDMI port
The HDMI (High Denition Multimedia Interface) port
supports a Full-HD device such as an LCD TV or monitor to
allow viewing on a larger external display.
Serial Port (COM Port)
The 9-pin D-sub serial port supports native serial devices
such as a serial drawing tablets, serial mouse, or serial
modem.
LAN(RJ-45) port
The eight-pin RJ-45 LAN port supports a standard Ethernet
cable for connection to a local network.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-
compatible device such as a monitor or projector to allow
viewing on a larger external display.
Power input (DC 19V)
The supplied power adapter converts AC power to DC
power for use with this jack. Power supplied through this
jack supplies power to the PC. To prevent damage to the
PC, always use the supplied power adapter.
WARNING! The power adapter may become warm to
hot when in use. Do not cover the adapter and keep
it away from your body.
Kensington® lock port
The Kensington® lock port allows you to secure your PC
using Kensington® compatible PC security products.
E410
15
English
Chapter 2: Using your PC
Positioning your PC
Mounting your PC on the stand
To mount your PC on the stand:
1. Locate the mounting hole at the bottom of your PC.
2. Align the stand’s mounting hole with the mounting hole on
your PC, then secure it in place with the stand screw.
IMPORTANT! Ensure that your PC is mounted on its stand before
placing it on a stable and at surface.
stand screw
X
16
E410
English
Installing your PC to a monitor
To install your PC to a monitor:
1. Secure the VESA mount to your monitor* with four screws
bundled with your VESA mount kit.
NOTE: Your monitor must comply with VESA75 or VESA100 standard.
* The PC can be mounted on an ASUS VS228H monitor.
E410
17
English
2. Align and place your PC into the VESA mount as shown.
NOTE: Ensure that the ASUS trademark on the rotation wheel of the
VESA mount is set to its customary position when putting in the PC so
that the machine can rotate properly.
ASUS trademark
PC VESA mount
18
E410
English
3. Secure the PC and the VESA mount assembly with a stand screw.
Ensure that the PC is rmly attached to the VESA mount.
NOTE: Use the stand screw bundled with the stand.
stand screw
PC and VESA mount assembly
E410
19
English
4. To adjust the angle of the PC and VESA mount assembly to
make the PC’s front and rear more accessible, press the lever
switch of the VESA mount to unlock the rotation wheel (A) then
rotate the PC and VESA mount assembly accordingly (B).
IMPORTANT!
• Settherotationwheeluprightwhenthesystemisinuse.
• PleasetakenoteofthecablesconnectedtothePCwhile
operating the rotation wheel. To prevent hazards from
loosened cables, the wheel is designed to rotate no more
than 90° clock/counterclock-wise.
A
A
B
rotation wheel
PC and VESA mount assembly
lever switch
20
E410
English
Using your PC
Connecting to an external display
Connect one end of an HDMI or a VGA cable to an external display,
and the other end of the cable to your PC’s HDMI or VGA port.
Connecting to a USB device
Connect USB devices like wired/wireless keyboards, mouse devices,
and printers to the USB ports on your PC.
NOTE: The keyboard varies with country or region.
X
E410
21
English
Connecting the wireless antenna (optional)
Connect the wireless antenna to your PC to enhance the wireless
signal. Ensure that the wireless antenna is in an upright position (90°
angle) to get the best wireless reception.
22
E410
English
Turning on your PC
NOTES:
• WhenyourPCisnotinuse,unplugthepoweradapteror
switchothepowerbuttontosaveonpowerconsumption.
• AdjustthepowermanagementsettingsintheWindow®
Control Panel. This is to ensure that your PC is set to a low
power consumption mode and is fully operational at the
same time.
X
E410
23
English
Conguring the audio output via an HDMI device
If you want to use a high-denition TV as an audio output device,
connect it to the Home Theater PC and follow the steps below to
congure the audio settings.
To congure the audio output via an HDMI device:
1. Do any of the following based on your PC’s operating system.
On Windows® 7
Right-click the Volume Mixer icon
on the Windows® notication area
and click Playback devices.
On Windows® 8.1
a. From the Start screen, click Desktop to launch the Desktop
Mode.
NOTE: For more details, refer to the section Start screen under Using
Windows® 8.1.
b. Right-click the Volume Mixer
icon on the Windows® taskbar
and click Playback devices.
On Windows® 10
a. From the Start screen, click
Desktop to launch the Desktop
Mode.
b. Right-click the Volume Mixer icon on the Windows® taskbar
and click Playback devices.
Volume Mixer
Volume Mixer
Volume Mixer
24
E410
English
4. Select Stereo and click
Next.
2. From the Playback screen,
select Digital Audio
(HDMI).
3. Click Congure and the
Speaker Setup window
pops up.
5. Tick the Front left and
right option, and click Next.
6. Click Finish to exit the
speaker setup.
E410
25
English
Keyboard shortcuts
Using your keyboard, you can also use the following shortcuts to
help you launch apps and navigate Windows®
10.
Switches between the Start screen and the last running
app
+ <D> Launches the desktop
+ <E> Launches File Explorer
+ <F>
or
+ <W>
Activates the File search function
+ <H> Launches Share
+ <I> Launches Settings
+ <K> Launches Media Connect
+ <L> Activates the Lock screen
+ <M> Hides all currently active screens to the taskbar
+ <P> Your desktop PC is mirrored to your secondary monitor
+ <Q> Launches Cortana
26
E410
English
+ <R> Launches the Run window
+ <U> Launches Ease of Access Center
+ <X> Launches a menu box of Windows tools
+ <+> Launches the magnier and zooms in your screen.
+ <-> Zooms out your screen.
+ <Enter> Opens the Narrator Settings.
E410
27
English
Chapter 3: Working with
Windows® 7
Starting for the rst time
When you start your Mini Desktop PC for the rst time, a series of
screens appear to guide you in conguring the basic settings of your
Windows® 7 operating system.
To start your Mini Desktop PC for the rst time:
1. Turn on your Mini Desktop PC. Wait for a few minutes until the
Set Up Windows screen appears.
2. From the dropdown list, select your preferred language then
click Next.
3. From the dropdown lists, select your Country or regiion, Time
and currency, and Keyboard layout then click Next.
4. Key in unique names for the user name and Mini Desktop PC
name then click Next.
5. Key in the necessary information to set up your password, then
click Next. You may also click Next to skip this step without
entering any information.
NOTE: If you want to set up a password for your account later, refer to
the Setting up a user account and password section in this user guide.
6. Carefully read the license terms. Tick I accept the license terms
then click Next.
7. Select Use recommended settings or Install important
updates only to set up the security settings of your Mini
Desktop PC. To skip this step, select Ask me later.
8. Review your date and time settings. Click Next. The system
loads the new settings then restarts.
9. After restarting, you may now start using your Mini Desktop PC.
28
E410
English
Using the Start menu
The Start menu gives access to programs, utilities and other useful
items on your Mini Desktop PC.
Launching items from the Start menu
1. From the Windows® taskbar, click .
2. From the Start menu, select the item that you want to launch.
NOTE: You may pin programs that you want constantly displayed on
the Start menu. For more details, refer to the Pinning programs on the
Start menu or taskbar section in this user guide.
Using Getting Started
The Getting Started option on the Start menu contains information
on some basic tasks such as personalizing Windows®, adding new
users, and transferring les to help you become more familiar with
using Windows® 7.
To use Getting Started:
1. Click .
2. From the Start menu, select Getting Started.
3. From the list of available tasks, select the task that you want to
do.
E410
29
English
Using the taskbar
The taskbar allows you to launch and manage programs or items
installed in your Mini Desktop PC.
Launching a program from the taskbar
From the Windows® taskbar, click an icon to launch it. Click the icon
again to hide the program.
Pinning items on the jumplists
When you right-click an icon on the taskbar, a jumplist appears
to provide quick-access to related links. You may pin items on the
jumplist such as favorite websites, frequently visited folders or
drives, and recently played media les.
To pin items on the jumplist:
1. Right-click an icon on the taskbar.
2. From the jumplist, right-click the item that you want to pin, then
select Pin to this list.
Unpinning items from the jumplist
1. Right-click an icon on the taskbar.
2. From the jumplist, right-click the item you want to remove then
select Unpin from this list.
30
E410
English
Using the notication area
By default, the notication area shows these three icons:
Action Center notication
Click this icon to display all alerts and notications. This also
launches the Windows® Action Center.
Network connection
This icon displays the connection status and signal stregth of the
wired or wireless network connection.
Volume
Click this icon to adjust the volume of your Mini Desktop PC.
Displaying an alert notication
To display an alert notication, click then click the message to
open it.
NOTE: For more details, refer to the Using Windows® Action Center in
this user guide.
Customizing icons and notications
You may choose to display or hide icons and notications on the
taskbar or on the notication area.
To customize icons and notications:
1. Click on the notication area.
2. Click Customize.
3. From the dropdown list, select your preferred behavior for the
icons or items you want to customize.
E410
31
English
Using Windows® Explorer
Windows® Explorer allows you to view, manage, and organize your
les folders.
Launching Windows® Explorer
Click to launch the Start menu then click Computer.
Exploring les and folders
1. Launch Windows® Explorer.
2. From the navigation or view pane, browse for the location of
your data.
3. Click the arrow on the breadcrumb bar to display to display the
contents of the drive or folder.
Customizing the le or folder view
1. Launch Windows® Explorer.
2. Select the location of your data.
3. Click .
4. From the view menu, move the slider to select how you want to
view the le or folder.
Arranging les
1. Launch Windows® Explorer.
2. From the Arrange by eld, click to display the dropdown list.
3. Select your preferred arrangement type.
32
E410
English
Sorting les
1. Launch Windows® Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Sort by then select your
preferred sorting type.
Grouping les
1. Launch Windows® Explorer.
2. Right-click anywhere on the View pane.
3. From the menu that appears, select Group by then select your
preferred grouping.
Adding a new folder
1. Launch Windows® Explorer.
2. From the toolbar, click New folder.
3. Key in a name for the new folder.
E410
33
English
Backing up les
To set up a backup:
1. Click > All Programs > Maintenance > Backup and
Restore.
2. Click Set up backup > Next.
3. Select your backup destination then click Next.
4. Select Let Windows choose (recommended) or Let me choose
as your backup mode.
NOTE: If you select Let Windows choose, Windows will not backup
your programs, FAT-formatted les, Recycle Bin les, or temporary
les that are 1GB or more.
5. Follow the onscreen instructions to nish the process.
Restoring your system settings
The Windows® System Restore feature creates a restore point the
Mini Desktop PC's system settings are stored at a certain time and
date. It allows you to restore or undo changes made to your Mini
DesktopPC'ssystemsettingswithoutaectingyourpersonaldata.
To restore your system:
1. Close all running applications.
2. Click > All Programs > Accessories > System Tools >
System Restore.
3. Follow the onscreen instructions to complete the process.
34
E410
English
Using Windows® 7 Action Center
Windows® 7 Action Center provides alert notications, security
information, system maintenance information, and the option to
automatically troubleshoot and x some commong Mini Desktop PC
problems.
Launching Windows® 7 Action Center
1. Click > Open Action Center.
2. Click the task that you want to do.
Using Windows® Update
Windows® update allows you to check and install the latest updates
to enhance the security and performance of your Mini Desktop PC.
Launching Windows® Update
1. Click to launch the Start menu.
2. Select All Programs > Windows Update.
3. Click the task that you want to do.
E410
35
English
Setting up a user account and password
You may create user accounts and passwords for people to use on
your Mini Desktop PC.
To set up a user account:
1. Click > Getting Started > Add new users.
2. Select Manage another account.
3. Select Create a new account.
4. Type the user name.
5. Select either Standard user or Administrator as the user type.
6. Once nished, click Create Account.
To set up a password:
1. Select the user that you would like to set a password for.
2. Select Create a password.
3. Type your preferred password then conrm it.
4. Type a password hint.
5. Once nished, click Create password.
Using Windows® Help and Support
Windows® Help and Support provides you with guides and answers
about using the applications included with your Windows® 7.
To launch Windows® Help and Support, click > Help and
Support.
NOTE: Connec to the Internet to get the latest Windows® online help.
36
E410
English
E410
37
English
NOTE:
For more information on how to update/upgrade to Windows® 8.1:
• IfyouarerunningWindows® 7, visit http://www.windows.
microsoft.com/en-us/windows-8/upgrade-to-windows-8
• IfyouarerunningWindows® 8, visit http://www.windows.
microsoft.com/en-us/windows-8/update-from-windows-8-
tutorial
Chapter 4: Working with
Windows® 8.1
NOTE: The operating system varies with country or region.
System requirements
To facilitate a smoother transition from your previous operating
system, read the system requirements below before upgrading to
Windows® 8.1:
Processor
1GHz or faster
RAM
1GB (32-bit) or 2 GB (64-bit)
Hard disk space
16 GB (32-bit) or 20 GB (64-bit)
Graphics card
Microsoft DirectX9 graphics device with
WDDM driver
Screen resolution
1024 x 768 for Windows® apps
38
E410
English
Starting for the rst time
When you start your computer for the rst time, a series of screens
appear to guide you in conguring the basic settings of your
Windows® 8.1 operating system.
To start for the rst time:
1. Turn your computer on. Wait for a few minutes until the setup
screen appears.
2. Carefully read the license terms. Tick I accept the license terms
for using Windows and click Accept.
3. Follow the next onscreen instructions to congure the following
basic items:
•Personalize
•Wireless
•Settings
•SignintoyourPC
4. Once you are done conguring the basic items, the Windows® 8.1
video tutorial appears. Watch this tutorial to learn more about
Windows® 8.1 functionalities.
5. The Start screen appears after successfully signing in to your
user account.
Windows® 8.1 lock screen
The Windows® 8.1 lock screen may appear when your PC enters the
Windows® 8.1 operating system. To proceed, tap on the lock screen
or press any key on your PC 's keyboard.
E410
39
English
Windows® UI
The Windows® User interface (UI) is the tile-based display used in
Windows® 8.1. It includes the following features you can use while
working on your PC.
Start Screen
The Start Screen appears after successfully signing in to your user
account. It helps organize all the programs and applications you
need in just one place.
NOTE: Actual apps shown onscreen may vary per model. The
following screenshot is for reference only.
Windows® apps
These are apps pinned on the Start screen and displayed on tiled-
format for easy access.
NOTE: Some apps require signing in to your Microsoft account before
they are fully launched.
40
E410
English
Hotspots on the Start screen
Hotspots
Onscreen hotspots allow you to launch programs and access the
settings of your PC. The functions in these hotspots can be activated
using your mouse.
Hotspots on a running app
E410
41
English
Hotspot Action
upper left corner Hover your mouse pointer then tap on the
recent app’s thumbnail to revert back to that
running app.
If you launched more than one app, slide down
to show all running apps.
lower left corner From a running app screen:
Hover your mouse pointer then click to go
back to the Start screen.
NOTE: You can also press the Windows
key on your keyboard to go back to
the Start screen.
From the Start screen:
Hover your mouse pointer then click to go
back to that app.
top Hover your mouse pointer until it changes to
a hand icon. Drag then drop the app to a new
location.
NOTE: This hotspot function only works
on a running app or when you want to use
the Snap feature. For more details, refer to
Snap feature under Working with Windows®
apps.
upper and lower right
corner
Hover your mouse pointer to launch the Charms
bar.
42
E410
English
Start button
Windows® 8.1 features the Start button which allows you to switch
between the two most recent apps you opened. The Start button
may be accessed from the Start screen, while on Desktop mode, and
on any app that is currently open onscreen.
Start button on the Start screen
NOTE: The actual color of your Start button varies depending on the
display settings you chose for your Start screen.
Hover your mouse pointer over the left corner of your Start screen or any opened app
to call out the Start button.
E410
43
English
Context menu
The context menu appears as a box lled with quick access to some
of the programs inside Windows® 8.1 when you right-click on the
Start button.
The context menu also includes the following shut down options for
your PC: sign out, sleep, shut down, restart.
Start button on Desktop mode
44
E410
English
Customizing your Start screen
Windows® 8.1 enables you to customize your Start screen, allowing
you to boot directly to the Desktop mode and customize the
arrangement of your apps onscreen.
To customize the settings of your Start screen:
1. Launch the Desktop.
2. Right-click anywhere on the taskbar, except on the Start button,
to launch the Taskbar and Navigation properties window.
3. Select the Navigation tab then tick the options you want to
use.
4. Click Apply to save the new settings then exit.
E410
45
English
Working with Windows® apps
Use your PC’s keyboard or mouse to launch and customize your
apps.
Launching apps
• Usingyourmouse,positionthemousepointeronanappthen
left-click once to launch it.
• Using your keyboard, press until an app is selected then
use the arrow keys to browse through the apps. Press
to launch your selected app.
Customizing apps from the Start screen
You can move, resize, or unpin apps from the Start screen using the
following steps.
Moving apps
To move an app, point and drag it to a new location.
Resizing apps
Right-click the app to activate its settings bar then tap and
select an app tile size.
Unpinning apps
To unpin an app from the Start screen, right-click on the app to
activate its settings bar then tap .
46
E410
English
Closing apps
• Movethemousepointeronthetopsideofthelaunchedapp
then wait for the pointer to change to a hand icon. Drag then
drop the app to the bottom of the screen to close it.
• Fromtherunningapp’sscreen,press .
Accessing the Apps screen
Aside from the apps already pinned on your Start screen, you can
also open other applications through the Apps screen.
NOTE: Actual apps shown onscreen may vary per model. The
following screenshot is for reference only.
Horizontal scroll bar
E410
47
English
Launching the Apps screen
Launch the Apps screen using a mouse or a keyboard.
Using your mouse, click the button.
Using your keyboard, from the Start screen, press ,
then press .
Pinning more apps on the Start screen
1. Launch the All Apps screen.
2. Right-click on the apps that you want to pin on the Start screen.
3. Click on the icon to pin the selected apps on the Start
screen.
48
E410
English
Charms bar
The Charms bar is a toolbar that can be triggered on the right side
of your screen. It consists of several tools that allow you to share
applications and provide quick access for customizing the settings of
your PC.
Launching the Charms bar
NOTE: When called out, the Charms bar initially appears as a set of
white icons. The image above shows how the Charms bar looks like
once activated.
Use your PC’s mouse or keyboard to launch the Charms bar:
• Moveyourmousepointerontheupperorlowerrightcornerof
the screen.
• Press .
Charms Bar
E410
49
English
Search
This tool allows you to look for les, applications, or
programs in your PC.
Share
This tool allows you to share applications via social
networking sites or email.
Start
This tool reverts the display back to the Start screen. From
the Start screen, you can also use this to revert back to a
recently opened app.
Devices
This tool allows you to access and share les with the
devices attached to your PC such as an external display or
printer.
Settings
This tool allows you to access the PC settings of your PC.
Inside the Charms bar
50
E410
English
Snap feature
The Snap feature displays two apps side-by-side, allowing you to
work or switch between apps.
Using Snap
Perform the following steps to activate Snap using your PC’s mouse
or keyboard.
Using your mouse
1. Launch the app you wish to snap.
2. Hover the mouse point on the top side of your screen.
3. Once the pointer changes to a hand icon, drag then drop
the app to the left or right side of the display panel.
4. Launch another app. This app is automatically placed on the
available pane.
Snap bar
E410
51
English
Using your keyboard
1. Launch the app you wish to snap.
2. Press and the left or right arrow key to snap the app
to the left or right pane.
3. Launch another app. This app is automatically placed on the
available pane.
Other keyboard shortcuts
Using the keyboard, you can also use the following shortcuts to help
you launch applications and navigate Windows®8.1.
\
Switches between the Start screen and the last
running app
Launches the desktop
Launches the This PC window on Desktop mode
Opens the File option from the Search charm
Opens the Share charm
Opens the Settings charm
52
E410
English
Activates the Lock screen
Minimizes all currently active windows
Launches the Project pane
Opens the Everywhere option from the Search charm
Opens the Run window
Opens Ease of Access Center
Opens the Settings option from the Search charm
Opens a context menu of the Start button
Launches the magnier icon and zooms in your screen
Zooms out your screen
Opens the Narrator Settings
E410
53
English
Turning your PC off
You can shut down your PC by doing either of the following
procedures:
• Hoveronthelowerleftcornerofyourscreentolaunchthe
Start Button, then right-click on it. In the context menu, select
Shutdown or signout > Shut down.
• Click from the Charms bar then click > Shut down to
do a normal shutdown.
• Fromthelog-inscreen,click > Shut down.
• IfyourPCisunresponsive,pressandholdthepowerbuttonfor
atleastfour(4)secondsuntilyourPCturnso.
• ToshutdownyourPCusingDesktopmode,launchthedesktop
then press alt + f4 to launch the Shut Down window. Select
Shut Down from the drop-down list then select OK.
Putting your PC to sleep
You activate sleep mode on your PC using the following procedures.
• PressthePowerbuttononce.
• ToputyourPCtosleepmodeusingDesktopmode,launchthe
desktop then press alt + f4 to launch the Shut Down window.
Select Sleep from the drop-down list then select OK.
54
E410
English
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the PC.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
• Anerrormessageappearsonthescreenduringthesystem
bootup and requests you to run the BIOS Setup.
• Youhaveinstalledanewsystemcomponentthatrequiresfurther
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
E410
55
English
Quickly enter the BIOS
To access the BIOS before the PC boots into the OS, try any of the
following:
• Beforebootingupthesystem,insertastraightenedpaperclip
into the BIOS key.
• Pressthepowerbuttonforatleastfoursecondstoshutdown
your PC, then press the power button again to turn your PC back
on, and press <F2> during POST.
• WhenyourPCiso,disconnectthepowercordfromyourPC’s
power connector. Reconnect the power cord and press the power
button to turn on your PC. Press <F2> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
X
BIOS key
56
E410
English
E410
57
English
Chapter 5: Working with
Windows® 10
Starting for the rst time
When you start your computer for the rst time, a series of screens
appear to guide you in conguring the basic settings of your
Windows® 10 operating system.
To start your Desktop PC for the rst time:
1. Press the power button on your Desktop PC. Wait for a few
minutes until the setup screen appears.
2. From the setup screen, pick your region and language that you
want to use on your desktop PC.
3. Carefully read the License Terms, then tap I Accept.
4. Follow the onscreen instructions to congure the following
basic items:
• Personalize
• Getonline
• Settings
• Youraccount
5. Wait until Windows® 10 nishes installing the apps and system
settings. After the installation, the Windows® 10 desktop
appears.
58
E410
English
Click your account name to change the
picture, sign out of your account, or lock your
Desktop PC
Click to display all the apps
Click to put on sleep mode, shut down,
or restart your desktop PC
Click to expand the Start screen
Click to launch the Start menu
Pin on or launch a
tiled-format app
from the Start
screen
Pin on or launch an app
from the taskbar
Using the Windows® 10 UI
The Windows® 10 User Interface (UI) includes the favorite Start menu
and the tiled-format on the Start screen. It includes the following
features you can use while working on your Desktop PC.
E410
59
English
Start menu
Windows® 10 brings back the Start menu with some enhancements,
such as the space that you can customize with your favorite apps,
people, or websites.
You can launch the Start menu in two ways:
• ClicktheStartbuttonfromthelower-leftcornerofthetaskbar.
• PresstheWindows® Start key on your keyboard.
Pinning apps to the Start screen or taskbar
To pin an app to the Start screen or taskbar:
1. From the Start menu, click All apps, then select the app that
you want to pin.
2. Click Pin to Start or Pin to taskbar to pin your selected app to
the Start screen or taskbar. You can also drag then drop an app
to the Start Screen or taskbar to pin it.
60
E410
English
Start screen
The Start screen , which appears together with the Start menu, helps
organize all the apps you need in just one place. The apps on the
Start screen are displayed on tiled-format for easy access.
NOTE: Some apps require signing in to your Microsoft account before
they are fully launched.
Click to restore the
Start screen
Moving apps on the Start screen
You can move apps from the Start screen simply through dragging
and dropping the app to your preferred location.
Unpinning apps from the Start screen
To unpin an app from the Start screen, right-click on the app to
activate its settings bar then click Unpin from Start.
E410
61
English
Taskbar
Windows® 10 comes with the standard taskbar, which stores all your
currently running apps or items in the background.
Unpinning apps from the taskbar
1. From the Start screen or taskbar, right-click the app you want to
unpin.
2. Click Unpin from Start or Unpin this program from taskbar
to remove the app from the Start screen or taskbar.
Using the Task View
When you have several running apps, you can click from the
taskbar to display all your running apps, and click on an app or item
to launch it.
If task view is disabled, click > Show Task View button to display
the task view icon .
62
E410
English
Snap feature
The Snap feature displays about four apps or more in one screen,
allowing you to work or switch among apps.
Using Snap
Use your Desktop PC’s mouse or keyboard to activate Snap onscreen.
Using your mouse
a) Launch an app, then drag and release on a screen corner to
snap it in place.
b) Snap another app to your preferred location on the screen.
Using your keyboard
a) Launch an app, press and the arrow keys to select the
direction where you want to snap the app in place.
b) Snap another app using and the arrow keys.
E410
63
English
Chapter 6: Connecting to the
Internet
Access emails, surf the Internet, and share applications via social
networking sites on or from your PC using wireless/Wi-Fi or wired
connection.
Connecting on Windows® 7
Wireless connection
1. Click the wireless network icon in the Windows® notication
area.
WARNING! For security concerns, DO NOT connect to an unsecured
network.
2. Select the wireless access point you want to connect to from the
list and click Connect to build the connection.
NOTES: If you cannot nd the desired access point, click the Refresh
icon on the upper right corner to refresh and search in the list
again.
3. When connecting, you may have to enter a password.
4. After a connection has been established, the connection is
shown on the list.
5. You can see the wireless network icon in the Notication
area.
64
E410
English
2. Congure a dynamic IP/PPPoE or static IP network connection.
NOTE: For more details, refer to the next sections.
Wired connection
1. Use a network (RJ-45) cable to connect your PC to a DSL/cable
modem or a local area network (LAN).
DSL/Cable Modem
LAN
Modem
RJ-45 cable
X
RJ-45 cable LAN
X
E410
65
English
Conguring an IP / PPPoE network connection
To congure your IP/PPPoE network connection:
1. Click the network icon in the Windows® Notication area
and select Open Network and Sharing Center.
2. Click Change adapter settings in the left blue pane.
3. Right-click Local Area Connection and select Properties.
4. Click Internet Protocol Version 4(TCP/IPv4) and click
Properties.
66
E410
English
5. Congure the type of IP address for network conguration.
To congure using a dynamic IP address:
a. Click Obtain an IP address automatically and click OK.
b. Proceed to Step 6 if you are using PPPoE connection.
To congure using a static IP address:
a. Click Use the following IP address.
b. Enter the IP address, Subnet mask and Gateway from your
service provider.
c. If needed, enter the preferred DNS Server address and
alternative address.
d. When done, click OK.
6. Return to the Network and Sharing Center and then click Set
up a new connection or network.
7. Select Connect to the Internet and click Next.
8. Select Broadband (PPPoE) and click Next.
9. Enter your User name and, Password, and Connection name.
Click Connect.
10. Click Close to nish the conguration.
11. Click the network icon in the taskbar and click the connection
you just created.
12. Enter your user name and password. Click Connect to connect
to the Internet.
E410
67
English
Connecting on Windows® 8.1
Wi-Fi connection
1. Launch the Charms bar.
NOTE: For details, refer to the section Charms bar under Working with
Windows® apps.
2. From the Charms bar, click and click the .
3. Select a wireless network from the list of available Wi-Fi
connections.
4. Click Connect to start the network connection.
NOTE: You may be prompted to enter a security key to connect to a
secured wireless network.
5. (Optional) To enable sharing between your PC and other
wireless-enabled systems, click Yes . Click No if you do not want
to enable the sharing function.
68
E410
English
DSL/Cable Modem
LAN
Wired connection
You can connect your PC to a local area network (LAN) or broadband
Internet connection using a network cable.
To connect your PC to a LAN connection using a network cable:
1. Connect one end of the network cable (RJ-45) to your PC’s LAN
port and the other end to the DSL/cable modem or a local area
network (LAN) port.
2. Launch the Desktop.
3. From the Windows® taskbar, right-click the network icon
then click Open Network and Sharing Center.
4. In the Network and Sharing Center window, click Change
adapter settings.
Modem
RJ-45 cable
X
RJ-45 cable LAN
X
E410
69
English
5. Right-click on the LAN controller then select Properties.
6. Click Internet Protocol Version 4(TCP/IPv4) then click
Properties.
7. Congure the type of IP address for network conguration.
To congure using a dynamic IP address:
a. Click Obtain an IP address automatically then click OK.
b. Proceed to step 8.
To congure using a static IP address:
a. Click Use the following IP address.
b. Type the IP address, Subnet mask and Default gateway from
your service provider.
c. If needed, you can also type the preferred DNS server
address and alternate DNS server address then click OK.
d. Proceed to step 8.
8. Return to the Network and Sharing Center window then click
Set up a new connection or network.
9. Select Connect to the Internet then click Next.
10. Click Broadband (PPPoE).
11. Key-in your User name, Password, and Connection name then
click Connect.
12. Click Close to nish the conguration.
13. Click on the taskbar then click the connection you just
created.
14. Key-in your user name and password then click Connect to start
connecting to the Internet.
70
E410
English
Connecting on Windows® 10
Wi-Fi connection
1. Click the wireless network icon in the Windows® notication
area.
WARNING! For security concerns, DO NOT connect to an unsecured
network.
2. Select the wireless access point you want to connect to from the
list and click Connect to build the connection.
NOTES: If you cannot nd the desired access point, click the Refresh
icon on the upper right corner to refresh and search in the list
again.
3. When connecting, you may have to enter a password.
4. After a connection has been established, the connection is
shown on the list.
5. You can see the wireless network icon in the Notication
area.
E410
71
English
2. Congure a dynamic IP/PPPoE or static IP network connection.
NOTE: For more details, refer to the next sections.
Wired connection
1. Use a network (RJ-45) cable to connect your PC to a DSL/cable
modem or a local area network (LAN).
DSL/Cable Modem
LAN
Modem
RJ-45 cable
X
RJ-45 cable LAN
X
72
E410
English
Conguring a dynamic IP/PPPoE network connection
1. Do either of these two ways to launch Network and Sharing
Center.
• Fromthetaskbar,right-click , then click Open Network
and Sharing Center.
• FromtheStartmenu,clickSettings > Network & Internet
> Ethernet > Network and Sharing Center.
2. From the Open Network and Sharing Center screen, click
Change Adapter settings.
3. Right-click on your LAN and select Properties.
4. Click Internet Protocol
Version 4(TCP/IPv4) and click
Properties.
E410
73
English
5. Click Obtain an IP address
automatically and click OK.
NOTE: Continue to the next
steps if you are using PPPoE
connection.
8. Select Connect to the
Internet and click Next.
7. Return to the Network
and Sharing Center
and then click Set up
a new connection or
network.
74
E410
English
9. Select Broadband (PPPoE)
and click Next.
10. Follow the next onscreen
instructions to complete
the setup.
Conguring a static IP network connection
1. Repeat steps 1 to 4 of the previous section.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway from your
service provider.
4. If needed, enter the preferred
DNS Server address and
alternative address.
5. When done, click OK.
E410
75
English
Chapter 7: Recovering your
system
Recovery options on Windows®
7
Using the Recovery Partition
The Recovery Partition quickly restores your PC’s software to its
original working state. Before using the Recovery Partition, copy
your data les (such as Outlook PST les) to USB storage devices or
to a network drive and make note of any customized conguration
settings (such as network settings).
The Recovery Partition is a reserved space on your hard disk drive
used to restore the operating system, drivers, and utilities installed
on your PC at the factory.
Recovering the OS to the factory default partition (F9
Recovery)
WARNING! DO NOT delete the partition named “RECOVERY.” The
recovery partition is created at the factory and cannot be restored by
the user if deleted. Take your system to an authorized ASUS service
center if you have problems with the recovery process.
To recover the OS to the factory default partition (F9 Recovery):
1. Press <F9> during bootup.
2. Select Windows setup [EMS Enabled] when this item appears
and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. The factory default partition will be displayed. Click Next.
76
E410
English
6. Data on the default partition will be cleared. Click Recover to
start the system recovery.
NOTE: You will lose all your data on the selected partition. Ensure that
you back up your important data.
7. When the recovery is completed successfully, click Reboot to
restart the system.
Backing up the factory default environment data to a USB
drive (F9 Backup)
To back up the factory default environment data to a USB drive
(F9 Backup):
1. Press <F9> during bootup.
2. Select Windows setup [EMS Enabled] when this item appears
and press [Enter].
3. Select the language and click Next.
4. Select Recover the OS to the Default Partition and click Next.
5. Select Backup the Factory Environment to a USB Drive and
click Next.
6. Connect a USB storage device to your PC to start the Factory
Default Environment backup.
NOTE: The required size of the connected USB storage device should
be larger than 15GB. The actual size may vary with your PC model.
E410
77
English
7. Select a desired USB storage device if more than one USB
storage device is connected to your EeeTop PC/EeeBox PC and
click Next.
NOTE: If there is already a partition with proper size in the selected
USB storage device (for example, a partition that has been used as the
backup partition), the system will show this partiton automatically
and reuse it for backup.
8. Basedonthedierentsituationsinthepreviousstep,dataon
the selected USB storage device or on the selected partition will
be cleared. Click Backup to start backup.
NOTE: You will lose all your data on the selected USB storage device
or on the selected partition. Ensure that you back up your important
data.
9. When the back up is completed successfully, click Reboot to
restart the system.
78
E410
English
Removing everything and reinstalling Windows
The Remove everything and reinstall Windows option in PC
Settings restores your PC to its original factory settings. To do this:
IMPORTANT! Back up all your data before using this option.
NOTE: This process may take a while to complete.
1. Launch the Charms bar.
2. Click Settings > Change PC Settings > Update and Recovery
> Recovery.
3. From the Remove everything and reinstall Windows option,
click Get Started.
4. Follow the onscreen instructions to complete the reinstallation
and reset process.
Recovery options on Windows®
8.1
E410
79
English
Recovery options on Windows® 10
Removing everything and reinstalling Windows®
Restoring your PC to its original factory settings can be done using
the Remove everything and reinstall options in PC Settings. Refer to
the steps below to use this option.
IMPORTANT! Back up all your data before using this option.
NOTE: This process may take a while to complete.
1. From the Start menu, click Settings > Update & security >
Recovery.
2. Scroll down to view the Remove everything and reinstall
Windows option. Under this option, click Get started.
3. Follow the onscreen instructions to complete the reinstallation
and reset process.
80
E410
English
E410
81
English
Appendices
Regulatory notices
REACH
Complying with the REACH (Registration, Evaluation, Authorization,
and Restriction of Chemicals) regulatory framework, we publish
the chemical substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm
forthedetailedrecyclinginformationindierentregions.
COATING NOTICE
IMPORTANT! To provide electrical insulation and maintain electrical
safety, a coating is applied to insulate the device except on the areas
where the I/O ports are located.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincluding
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions,
may cause harmful interference to radio communications.
82
E410
English
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determinedbyturningtheequipmentoandon,theuseris
encouraged to try to correct the interference by one or more of the
following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdierentfrom
that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
CAUTION! Any changes or modications not expressly approved by
the grantee of this device could void the user’s authority to operate
the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure
compliance.
E410
83
English
ISED Radiation Exposure Statement for Canada
This equipment complies with ISED radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance with
ISED RF exposure compliance requirements, please avoid direct
contact to the transmitting antenna during transmitting. End users
must follow the specic operating instructions for satisfying RF
exposure compliance.
Operation is subject to the following two conditions:
• Thisdevicemaynotcauseinterferenceand
• Thisdevicemustacceptanyinterference,includinginterference
that may cause undesired operation of the device.
Compliance Statement of Innovation, Science and
Economic Development Canada (ISED)
This Class B digital apparatus complies with Canadian ICES-003, RSS-
210, and CAN ICES-3(B)/NMB-3(B).
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED)
Cet appareil numérique de classe B est conforme aux normes
canadiennes ICES-003, RSS-210 et CAN ICES-3(B)/NMB-3(B).
Cet appareil est conforme aux normes CNR exemptes de licence
d’Industrie Canada. Le fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil ne doit pas provoquer
d’interférences et (2) cet appareil doit accepter toute interférence, y
compris celles susceptibles de provoquer un fonctionnement non
souhaité de l’appareil.
84
E410
English
Wireless Operation Channel for Dierent Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
Regional notice for Singapore
This ASUS product complies with IMDA Standards.
Complies with
IMDA Standards
DB103778
Regional notice for California
WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
E410
85
English
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money
and protect the environment through energy
ecient products and practices.
All ASUS products with the ENERGY STAR logo
comply with the ENERGY STAR standard, and the
power management feature is enabled by default. The monitor and
computer are automatically set to sleep after 10 and 30 minutes of
user inactivity. To wake your computer, click the mouse or press any
key on the keyboard.
Please visit http://www.energystar.gov/powermanagement for
detail information on power management and its benets to the
environment. In addition, please visit http://www.energystar.gov for
detail information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based
products.
86
E410
English
ASUS contact information
ASUSTeK COMPUTER INC.
Address 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site http://www.asus.com
Technical Support
Telephone +86-21-3842-9911
Fax +86-21-5866-8722, ext. 9101#
Online support http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site http://usa.asus.com
Technical Support
Support fax +1-812-284-0883
General support +1-812-282-2787
Online support http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax +49-2102-959931
Web site http://www.asus.com/de
Online contact http://eu-rma.asus.com/sales
Technical Support
Telephone +49-2102-5789555
Support Fax +49-2102-959911
Online support http://qr.asus.com/techserv
Manufacturer ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112,
TAIWAN
Authorised
representative in
Europe
ASUSTeK Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY