Table of Contents
ASUS F20CD-NL006T User Manual
Displayed below is the user manual for F20CD-NL006T by ASUS which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
ASUS Desktop PC
K20CD/A20CD/F20CD
User Guide
2
Copyright © 2015 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK
Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such
repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is
defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF
ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS
MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE
ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES
THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights
of their respective companies, and are used only for identification or explanation and to the owners’ benefit,
without intent to infringe.
E10808
First Edition
September 2015
3
Contents
Notices ................................................................................................................................................ 4
Safety information ...........................................................................................................................7
Conventions used in this guide................................................................................................... 8
Where to find more information .................................................................................................8
Package contents ............................................................................................................................. 9
Chapter 1: Getting started
Welcome! ........................................................................................................................................... 11
Getting to know your computer ...............................................................................................11
Setting up your computer...........................................................................................................15
Turning your computer ON ........................................................................................................18
Chapter 2: Connecting devices to your computer
Connecting a USB storage device ............................................................................................19
Removing a USB storage device ...............................................................................................19
Connecting microphone and speakers ..................................................................................20
Connecting multiple external displays ..................................................................................23
Connecting an HDTV ....................................................................................................................24
Chapter 3: Using your computer
Proper posture when using your Desktop PC ...................................................................... 25
Using the memory card reader .................................................................................................26
Using the optical drive .................................................................................................................27
Chapter 4: Connecting to the Internet
Wired connection ........................................................................................................................... 29
Chapter 5: Troubleshooting
Troubleshooting .............................................................................................................................33
Appendix
Windows® 10 User Manual
Starting for the first time .............................................................................................................43
Using the Windows® 10 UI ...........................................................................................................44
Keyboard shortcuts .......................................................................................................................48
ASUS contact information
ASUS contact information ...........................................................................................................50
4
Notices
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for
protecting our environment. We believe in providing solutions for you to be able to responsibly
recycle our products, batteries, other components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals)
regulatory framework, we published the chemical substances in our products at ASUS REACH
website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• Thisdevicemaynotcauseharmfulinterference;and
• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdierentfromthattowhichthereceiveris
connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
The use of shielded cables for connection of the monitor to the graphics card is required to
assure compliance with FCC regulations. Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Lithium Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions.
5
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 210
of Industry Canada. This Class B device meets all the requirements of the Canadian interference-
causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer
un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
6
RF Equipment Notices
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz). This wireless device complies with the R&TTE Directive.
Wireless Radio Use
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
Exposure to Radio Frequency Energy
The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure
limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential
for human contact during normal operation is minimized.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be colocated or operated in conjunction with any
other antenna or transmitter subject to the conditions of the FCC Grant.
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment
regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
BSMI: Taiwan Wireless Statement
Japan RF Equipment Statement
KC (RF Equipment)
7
Safety information
Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean
cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few
drops of warm water then remove any extra moisture with a dry cloth.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been
damaged.
• DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
• DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop
PC.
• DO NOT expose to strong magnetic or electrical fields.
• DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during
electrical storms.
• Batterysafetywarning:DO NOT throw the battery in fire. DO NOT short circuit the contacts.
DO NOT disassemble the battery.
• Usethisproductinenvironmentswithambienttemperaturesbetween0˚C(32˚F)and35˚C
(95˚F).
• DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.
• DO NOT use damaged power cords, accessories, or other peripherals.
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•
Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
•
Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Hazardous moving parts. Desktop should be completely shutdown before servicing product.
Replacing fan components should only be attempted by qualified service personnel.
Hazardous Moving Parts Warning
WARNING: Keep fingers and other body parts away from any moving parts.
8
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this guide.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software products.
Refer to the ASUS website www.asus.com.
ASUS Local Technical Support
Visit ASUS website at http://support.asus.com/contact for the contact information of local
Technical Support Engineer.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
9
Package contents
• Ifanyoftheaboveitemsisdamagedormissing,contactyourretailer.
• Theillustrateditemsaboveareforreferenceonly.Actualproductspecicationsmayvarywith
different models.
ASUS Desktop PC Keyboard x1
Mouse x1 Power cord x1
Installation Guide
Power adapter x1 Installation Guide x1
Warranty Card x1 DVD/SDVD/RDVD x1 (optional)
10
Welcome!
Thank you for purchasing the ASUS Desktop PC!
The ASUS Desktop PC provides cutting-edge performance, uncompromised reliability, and user-
centric utilities. All these values are encapsulated in a stunningly futuristic and stylish system
casing.
Read the ASUS Warranty Card before setting up your ASUS Desktop PC.
Getting to know your computer
Illustrations are for reference only. The ports, their locations and the chassis color vary with
different models.
ASUS K20CD/A20CD/F20CD 11
Chapter 1
Getting started
Front panel
USB 3.0 port. This Universal Serial Bus 3.0 (USB 3.0) port connects to a USB 3.0 device
such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetotheUSB3.0portwheninstallingaWindows®
operating system.
• DuetoUSB3.0controllerlimitations,USB3.0devicescanonlybeusedunderaWindows®
OS environment and after the USB 3.0 driver installation.
• USB3.0devicescanonlybeusedfordatastorage.
• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0portsforafasterand
better performance from your USB 3.0 devices.
Headphone port. This port connects to a headphone or speaker. Supported by ASUS
Audio Wizard.
xD-Picture (XD) / Secure Digital™ (SD) / Memory Stick Pro™(MS/PRO) card slot. Insert
a supported memory card into this slot.
Microphone port. This port connects to a microphone.
Optical disk drive eject button. Press this button to eject the optical disk drive tray.
Optical disk drive bay. There is an optical disk drive in this bay.
Power button. Press this button to turn on your computer.
12 Chapter 1: Getting started
ENGLISH
ENGLISH
Rear panel
Line In port (light blue). This port connects to a tape, CD, DVD player, or other audio
sources.
Line Out port (lime). This port connects to a headphone or speaker. In a 4.1, 5.1
or 7.1-channel configuration, the function of this port becomes Front Speaker Out.
Supported by ASUS Audio Wizard.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table for the function of the audio ports in a 2.1, 4.1, 5.1 or
7.1-channel configuration.
USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports connect to USB 2.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
Audio 2.1, 4.1, 5.1 or 7.1-channel configuration
Port Headset 2.1-channel 4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Front panel - - - Side Speaker Out
ASUS K20CD/A20CD/F20CD 13
ENGLISH
ENGLISH
USB 3.1 ports type A. This Universal Serial Bus 3.1 (USB 3.1) port is for USB 3.1 device.
USB 3.0 ports. These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices
such as a mouse, printer, scanner, camera, PDA, and others.
• DONOTconnectakeyboard/mousetotheUSB3.0portwheninstallingaWindows®
operating system.
• DuetoUSB3.0controllerlimitations,USB3.0devicescanonlybeusedunderaWindows®
OS environment and after the USB 3.0 driver installation.
• USB3.0devicescanonlybeusedfordatastorage.
• WestronglyrecommendthatyouconnectUSB3.0devicestoUSB3.0portsforafasterand
better performance from your USB 3.0 devices.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
VGA port. This port is for VGA-compatible devices such as a VGA monitor.
DC-In port. Plug the power adapter into this port.
Air vents. These vents allow air ventilation.
DO NOT block the air vents on the chassis. Always provide proper ventilation for your
computer.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.
LAN port LED indications
Activity/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps connection
ORANGE Linked ORANGE 100Mbps connection
BLINKING Data activity GREEN 1Gbps connection
LAN port
SPEED
LED
ACT/LINK
LED
ASUS Graphics Card (on selected models only). The display output ports on this
optional ASUS Graphics Card may vary with different models.
VGA port (on selected models only). This port is for VGA-compatible devices such as
a VGA monitor.
Expansion slot bracket. Remove the expansion slot bracket when installing an
expansion card.
14 Chapter 1: Getting started
ENGLISH
ENGLISH
Setting up your computer
This section guides you through connecting the main hardware devices, such as the external
monitor, keyboard, mouse, and power adapter to your computer.
Connecting an external monitor
Using the ASUS Graphics Card (on selected models only)
Connect your monitor to the display output port on the discrete ASUS Graphics Card.
To connect an external monitor using the ASUS Graphics Card:
1. Connect a monitor to a display output port on the ASUS Graphics Card.
2. Plug the monitor to your desktop PC.
ASUS K20CD/A20CD/F20CD 15
ENGLISH
ENGLISH
If your computer comes with an ASUS Graphics Card, the graphics card is set as the primary
display device in the BIOS. Hence, connect your monitor to a display output port on the graphics
card.
Using the onboard monitor output ports
Connect your monitor to the onboard display output port.
To connect an external monitor using the onboard display output ports:
1. Connect a VGA monitor to the VGA port, or a DVI-D monitor to the DVI-D port, or an HDMI
monitor to the HDMI port on the rear panel of your computer.
2. Plug the monitor to your desktop PC.
16 Chapter 1: Getting started
ENGLISH
ENGLISH
Connecting a USB keyboard and a USB mouse
Connect a USB keyboard and a USB mouse to the USB ports on the rear panel of your computer.
Connect your USB keyboard and USB mouse to the USB 2.0 ports.
Connecting the power cord
Connect one end of the power cord to the power connector on the rear panel of your computer
and the other end to a power source.
`
ASUS K20CD/A20CD/F20CD 17
ENGLISH
ENGLISH
Turning your computer ON
This section describes how to turn on your computer after setting up your computer.
Turning your computer ON
To turn your computer ON:
1. Turn your monitor ON.
2. Press the power button on your computer.
3. Wait until the operating system loads automatically.
Power button
18 Chapter 1: Getting started
ENGLISH
ENGLISH
Removing a USB storage device
To remove a USB storage device:
1. Click , then click from the Windows taskbar on your computer, then click Eject.
2. When the Safe to Remove Hardware message pops up, remove the USB storage device
from your computer.
DO NOT remove a USB storage device when data transfer is in progress. Doing so may cause data
loss or damage the USB storage device.
Connecting a USB storage device
This desktop PC provides USB 2.0, USB 3.0, and USB 3.1 ports on the front and rear panels. The USB
ports allow you to connect USB devices such as storage devices.
To connect a USB storage device:
• InserttheUSBstoragedevicetoyourcomputer.
Front panel Rear panel
ASUS K20CD/A20CD/F20CD 19
ENGLISH
ENGLISH
Chapter 2
Connecting devices to your computer
Connecting microphone and speakers
This desktop PC comes with microphone ports and speaker ports on both the front and rear panels.
The audio I/O ports located on the rear panel allow you to connect 2.1-channel, 4.1-channel, and
5.1-channel stereo speakers.
Connecting Headphone and Mic
Connecting 2.1-channel Speakers
20 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Connecting 4.1-channel Speakers
Connecting 5.1-channel Speakers
ASUS K20CD/A20CD/F20CD 21
ENGLISH
ENGLISH
Connecting 7.1-channel Speakers
LINE OUT
22 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
Connecting multiple external displays
Your desktop PC may come with VGA, HDMI, or DVI ports and allows you to connect multiple
external displays.
When a graphics card is installed in your computer, connect the monitors on the output ports of
the graphics card.
Setting up multiple displays
When using multiple monitors, you are allowed to set display modes. You can use the additional
monitor as a duplicate of your main display, or as an extension to enlarge your Windows desktop.
To set up multiple displays:
1. Turn off your computer.
2. Connect the two monitors to your computer and connect the power cords to the monitors.
Refer to Setting up your computer section in Chapter 1 for details on how to connect a
monitor to your computer.
3. Turn on your computer.
4. From the Start menu, click Settings > System > Display.
5. Configure the settings for your displays.
For some graphic cards, only the monitor that is set to be the primary display has display during
POST. The dual display function works only under Windows.
ASUS K20CD/A20CD/F20CD 23
ENGLISH
ENGLISH
Connecting an HDTV
Connect a High Definition TV (HDTV) to the HDMI port of your computer.
• YouneedanHDMIcabletoconnecttheHDTVandthecomputer.TheHDMIcableispurchased
separately.
• Togetthebestdisplayperformance,ensurethatyourHDMIcableislessthan15meters.
24 Chapter 2: Connecting devices to your computer
ENGLISH
ENGLISH
ASUS K20CD/A20CD/F20CD 25
ENGLISH
ENGLISH
Chapter 3
Using your computer
Proper posture when using your Desktop PC
When using your Desktop PC, maintaining the proper posture is necessary to prevent strain to your
wrists, hands, and other joints or muscles. This section provides you with tips on avoiding physical
discomfort and possible injury while using and fully enjoying your Desktop PC.
Eye level to the top of
the monitor screen
Foot rest
90˚ angles
To maintain the proper posture:
• Positionyourcomputerchairtomakesurethatyourelbowsareatorslightlyabovethe
keyboard to get a comfortable typing position.
• Adjusttheheightofyourchairtomakesurethatyourkneesareslightlyhigherthanyour
hips to relax the backs of your thighs. If necessary, use a footrest to raise the level of your
knees.
• Adjustthebackofyourchairsothatthebaseofyourspineisrmlysupportedandangled
slightly backward.
• Situprightwithyourknees,elbowsandhipsatanapproximately90ºanglewhenyouareat
the PC.
• Placethemonitordirectlyinfrontofyou,andturnthetopofthemonitorscreenevenwith
your eye level so that your eyes look slightly downward.
• Keepthemouseclosetothekeyboard,andifnecessary,useawristrestforsupportto
reduce the pressure on your wrists while typing.
• UseyourDesktopPCinacomfortably-litarea,andkeepitawayfromsourcesofglaresuchas
windows and straight sunlight.
• Takeregularmini-breaksfromusingyourDesktopPC.
Using the memory card reader
Digital cameras and other digital
imaging devices use memory cards to
store digital picture or media files. The
built-in memory card reader on the front
panel of your system allows you to read
from and write to different memory card
drives.
To use the memory card:
1. Insert the memory card into the
card slot.
• Amemorycardiskeyedsothatittsinonlyonedirection.DONOTforceacardintoaslotto
avoid damaging the card.
• Youcanplacemediainoneormoreofthecardslotsanduseeachmediaindependently.Place
only one memory card in a slot at one time.
2. Select a program from the AutoPlay window to access your files.
• FromtheStartupmenu,clickFile Explorer, and then double-click the memory card icon to
access the data on it.
• EachcardslothasitsowndriveiconwhichisdisplayedontheFileExplorerscreen.
3. When finished, right-click the memory card drive icon, click Eject, and then remove the card.
Never remove cards while or immediately after reading, copying, formatting, or deleting data on
the card or else data loss may occur.
26 Chapter 3: Using your computer
ENGLISH
ENGLISH
Inserting an optical disc
To insert an optical disc:
1. While your system is on, press the eject button to open the tray.
2. Place the disc on the optical drive with the label side outward if the desktop is positioned
vertically and the label side up if the desktop is positioned horizontally.
3. Push the tray gently to close it.
4. Select a program from the AutoPlay window to access your files.
If AutoPlay is NOT enabled in your computer, to access the data on an optical disc:
• FromtheStartmenu,clickFile Explorer, and then double-click the CD/DVD drive icon.
Removing an optical disc
To remove an optical disc:
1. While the system is on, do either of the following to eject the tray:
• Presstheejectbuttonbelowthedrivebaycover.
• FromtheStartmenu,clickFile Explorer, right-click the CD/DVD drive icon, and click
Eject.
2. Remove the disc from the disc tray.
Using the optical drive
ASUS K20CD/A20CD/F20CD 27
ENGLISH
ENGLISH
28 Chapter 3: Using your computer
ENGLISH
ENGLISH
Wired connection
Use an RJ-45 cable to connect your computer to a DSL/cable modem or a local area network (LAN).
Connecting via a DSL/cable modem
To connect via a DSL/cable modem:
1. Set up your DSL/cable modem.
Refer to the documentation that came with your DSL/cable modem.
2. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to a DSL/cable modem.
3. Turn on the DSL/cable modem and your computer.
4. Configure the necessary Internet connection settings.
• ContactyournetworkadministratorfordetailsorassistanceinsettingupyourInternet
connection.
• Formoredetails,refertothesectionsConfiguring a dynamic IP/PPPoE network connection
or Configuring a static IP network connection.
Modem
RJ-45 cable
ASUS K20CD/A20CD/F20CD 29
ENGLISH
ENGLISH
Chapter 4
Connecting to the Internet
Connecting via a local area network (LAN)
To connect via a LAN:
1. Connect one end of an RJ-45 cable to the LAN (RJ-45) port on the rear panel of your
computer and the other end to your LAN.
2. Turn on your computer.
3. Configure the necessary Internet connection settings.
• ContactyournetworkadministratorfordetailsorassistanceinsettingupyourInternet
connection.
• Formoredetails,refertothesectionsConfiguring a dynamic IP/PPPoE network connection
or Configuring a static IP network connection.
LAN
RJ-45 cable
30 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE network connection:
1. Launch Network and Sharing Center in either of these two ways:
a) From the taskbar, right-click , then click Open Network and Sharing Center.
b) From the Start menu, click Settings > Network & Internet > Ethernet > Network and
Sharing Center.
2. From the Open Network and Sharing Center screen, click Change Adapter settings.
3. Right-click on your LAN and select
Properties.
4. Click Internet Protocol Version 4(TCP/
IPv4) and click Properties.
5. Click Obtain an IP address automatically
and click OK.
Continue to the next steps if you are using PPPoE connection.
ASUS K20CD/A20CD/F20CD 31
ENGLISH
ENGLISH
8. Select Connect to the Internet and
click Next.
7. Return to the Network and
Sharing Center and then click
Set up a new connection or
network.
9. Select Broadband (PPPoE) and click
Next.
10. Follow the next onscreen instructions to
complete the setup.
Configuring a static IP network connection
To configure a static IP network connection:
1. Repeat steps 1 to 4 of the previous section.
2 Click Use the following IP address.
3. Enter the IP address, Subnet mask and Gateway
from your service provider.
4. If needed, enter the preferred DNS Server
address and alternative address.
5. When done, click OK.
32 Chapter 4: Connecting to the Internet
ENGLISH
ENGLISH
ASUS K20CD/A20CD/F20CD 33
ENGLISH
ENGLISH
Chapter 5
Troubleshooting
Troubleshooting
This chapter presents some problems you might encounter and the possible solutions.
?
My computer cannot be powered on and the power LED on the front panel
does not light up.
• Checkifyourcomputerisproperlyconnected.
• Checkifthewalloutletisfunctioning.
• CheckifthePowerSupplyUnitisswitchedon.RefertothesectionTurning your
computer ON in Chapter 1.
?
My computer hangs.
• Dothefollowingtoclosetheprogramsthatarenotresponding:
1. Simultaneously press <Alt> + <Ctrl> + <Delete> keys on the keyboard, then
click Task Manager.
2. Select the program that is not responding, then click End Task.
• Ifthekeyboardisnotresponding,pressandholdthePowerbuttononthetopof
your chassis until the computer shuts down. Then press the Power button to turn it
on.
?
I cannot connect to a wireless network using the ASUS WLAN Card (on
selected models only)?
• Ensurethatyouenterthecorrectnetworksecuritykeyforthewirelessnetworkyou
want to connect to.
• Connecttheexternalantennas(optional)totheantennaconnectorsontheASUS
WLAN Card and place the antennas on the top of your computer chassis for the
best wireless performance.
34 Chapter 5: Troubleshooting
ENGLISH
ENGLISH
?
The arrow keys on the number key pad are not working.
Check if the Number Lock LED is off. When the Number Lock LED is on, the keys on
the number key pad are used to input numbers only. Press the Number Lock key to
turn the LED off if you want to use the arrow keys on the number key pad.
?
No display on the monitor.
• Checkifthemonitorispoweredon.
• Ensurethatyourmonitorisproperlyconnectedtothevideooutputportonyour
computer.
• Ifyourcomputercomeswithadiscretegraphicscard,ensurethatyouconnectyour
monitor to a video output port on the discrete graphics card.
• Checkifanyofthepinsonthemonitorvideoconnectorisbent.Ifyoudiscoverbent
pins, replace the monitor video connector cable.
• Checkifyourmonitorispluggedtoapowersourceproperly.
• Refertothedocumentationthatcamewithyourmonitorformoretroubleshooting
information.
?
When using multiple monitors, only one monitor has display.
• Ensurethatthebothmonitorsarepoweredon.
• DuringPOST,onlythemonitorconnectedtotheVGAporthasdisplay.Thedual
display function works only under Windows.
• Whenagraphicscardisinstalledonyourcomputer,ensurethatyouconnectthe
monitors to the output port on the graphics card.
• Checkifthemultipledisplayssettingsarecorrect.
?
My computer cannot detect my USB storage device.
• ThersttimeyouconnectyourUSBstoragedevicetoyourcomputer,Windows
automatically installs a driver for it. Wait for a while and go to My Computer to
check if the USB storage device is detected.
• ConnectyourUSBstoragedevicetoanothercomputertotestiftheUSBstorage
device is broken or malfunctions.
ASUS K20CD/A20CD/F20CD 35
ENGLISH
ENGLISH
?
I want to restore or undo changes to my computer’s system settings
without affecting my personal files or data.
You can use Windows® 10 Refresh your PC without affecting your files recovery
option to restore or undo changes to your computer’s system settings without
affecting your personal data such as documents or photos. To use this recovery
option, click Settings > Update & recovery > Recovery from the Start menu,
select Refresh your PC without affecting your files, and click Get started.
?
The picture on the HDTV is distorted.
• ItiscausedbythedierentresolutionsofyourmonitorandyourHDTV.Adjustthe
screen resolution to fit your HDTV. To change the screen resolution:
• FromtheStartmenu,clickSettings > System > Display.
?
My speakers produce no sound.
• EnsurethatyouconnectyourspeakerstotheLineoutport(lime)onthefrontpanel
or the rear panel.
• Checkifyourspeakisconnectedtoanelectricalsourceandturnedon.
• Adjustyourspeakers’volume.
• Ensurethatyourcomputer’ssystemsoundsarenotMuted.
• Ifitismuted,thevolumeiconisdisplayedas . To enable the system
sounds, click from the Windows notification area, then click .
• Ifitisnotmuted,click and drag the slider to adjust the volume.
• Connectyourspeakerstoanothercomputertotestifthespeakersarerworking
properly.
?
The DVD drive cannot read a disc.
• Checkifthediscisplacedwiththelabelsidefacingup.
• Checkifthedisciscenteredinthetray,especiallyforthediscswith
non-standard size or shape.
• Checkifthediscisscratchedordamaged.
?
The DVD drive eject button is not responding.
1. From the Start menu, click File Explorer.
2. Right-click , then click Eject from the menu
36 Chapter 5: Troubleshooting
ENGLISH
ENGLISH
Power
Problem Possible Cause Action
No power
(The power
indicator is off)
Incorrect power voltage
•Setyourcomputer’spowervoltage
switch to your area’s power
requirements.
•Adjustthevoltagesettings.Ensurethat
the power cord is unplugged from the
power outlet.
Your computer is not turned
on.
Press the power key on the front panel to
ensure that your computer is turned on.
Your computer’s power cord
is not properly connected.
•Ensurethatthepowercordisproperly
connected.
•Useothercompatiblepowercord.
PSU (Power supply unit)
problems
Contact the ASUS Service Center about
installing another PSU on your computer.
Display
Problem Possible Cause Action
No display output
after turning the
computer on
(Black screen)
The signal cable is not
connected to the correct
VGA port on your computer.
•Connectthesignalcabletothecorrect
display port (onboard VGA or discrete
VGA port).
•IfyouareusingadiscreteVGAcard,
connect the signal cable to the discrete
VGA port.
Signal cable problems Try connecting to another monitor.
ASUS K20CD/A20CD/F20CD 37
ENGLISH
ENGLISH
LAN
Problem Possible Cause Action
Cannot access the
Internet
The LAN cable is not
connected.
Connect the LAN cable to your
computer.
LAN cable problems
Ensure the LAN LED is on. If not, try
another LAN cable. If it still does not
work, contact the ASUS service center.
Your computer is not
properly connected to a
router or hub.
Ensure that your computer is properly
connected to a router or hub.
Network settings Contact your Internet Service Provider
(ISP) for the correct LAN settings.
Problems caused by the anti-
virus software Close the anti-virus software.
Driver problems Reinstall the LAN driver
Audio
Problem Possible Cause Action
No Audio
Speaker or headphone is
connected to the wrong port.
•Refertoyourcomputer’sUserGuide
for the correct port.
•Disconnectandreconnectthespeaker
to your computer.
Speaker or headphone does
not work.
Try using another speaker or
headphone.
The front and back audio
ports do not work.
Try both the front and back audio ports.
If one port failed, check if the port is set
to multi-channel.
Driver problems Reinstall the audio driver
38 Chapter 5: Troubleshooting
ENGLISH
ENGLISH
System
Problem Possible Cause Action
System speed is
too slow
Too many programs are
running. Close some of the programs.
Computer virus attack
•Useananti-virussoftwaretoscanfor
viruses and repair your computer.
•Reinstalltheoperatingsystem.
The system often
hangs or freezes.
Hard disk drive failure
•Sendthedamagedharddiskdriveto
ASUS Service Center for servicing.
•Replacewithanewharddiskdrive.
Memory module problems
•Replacewithcompatiblememory
modules.
•Removetheextramemorymodules
that you have installed, then try again.
•Contact the ASUS Service Center for
assistance.
There is not enough
air ventilation for your
computer.
Move your computer to an area with
better air flow.
Incompatible softwares are
installed.
Reinstall the OS and reinstall
compatible softwares.
ASUS K20CD/A20CD/F20CD 39
ENGLISH
ENGLISH
CPU
Problem Possible Cause Action
Too noisy right
after turning on the
computer.
Your computer is booting up.
It is normal. The fan runs on its full
speed when the computer is powering
on. The fan slows down after entering
the OS.
The BIOS settings have been
changed. Restore the BIOS to its default settings.
Old BIOS version
Update the BIOS to the latest version.
Visit the ASUS Support site at http://
support.asus.com to download the
latest BIOS versions.
Computer is too
noisy when in use.
The CPU fan has been
replaced.
Ensure that you are using a compatible
or ASUS-recommended CPU fan.
There is not enough air
ventilation for the computer.
Ensure that your computer is working
in an area with good air flow.
The system temperature is
too high.
•UpdatetheBIOS.
•Ifyouknowhowtoreinstallthe
motherboard, try to clean the inner
space of the chassis.
•Contact the ASUS Service Center for
assistance.
If the problem still persists, refer to your Desktop PC’s warranty card and contact the ASUS Service
Center. Visit the ASUS Support site at http://support.asus.com for the service center information.
40 Chapter 5: Troubleshooting
ENGLISH
ENGLISH
ASUS Desktop PC
Windows® 10
User Manual
E10435
First Edition
May 2015
Copyright © ASUSTeK Computer Inc.
All Rights Reserved
Appendix
Windows® 10 User Manual
ENGLISH
ENGLISH
ASUS Desktop PC 43
ENGLISH
ENGLISH
Starting for the first time
When you start your computer for the first time, a series of screens appear to guide you in
configuring the basic settings of your Windows® 10 operating system.
To start your Desktop PC for the first time:
1. Press the power button on your Desktop PC. Wait for a few minutes until the setup screen
appears.
2. From the setup screen, pick your region and language that you want to use on your desktop
PC.
3. Carefully read the License Terms, then tap I Accept.
4. Follow the onscreen instructions to configure the following basic items:
• Personalize
• Getonline
• Settings
• Youraccount
5. Wait until Windows® 10 finishes installing the apps and system settings. After the installation,
the Windows® 10 desktop appears.
44 Windows® 10 User Manual
ENGLISH
ENGLISH
Click your account name to change the
picture, sign out of your account, or lock your
Desktop PC
Click to display all the apps
Click to put on sleep mode, shut down,
or restart your desktop PC
Click to expand the Start screen
Click to launch the Start menu
Pin on or launch
a tiled-format
app from the
Start screen
Pin on or launch an app
from the taskbar
Start menu
Windows® 10 brings back the Start menu with some enhancements, such as the space that you can
customizewithyourfavoriteapps,people,orwebsites.
YoucanlaunchtheStartmenuintwoways:
• ClicktheStartbuttonfromthelower-leftcornerofthetaskbar.
• PresstheWindows® Start key on your keyboard.
Pinning apps to the Start screen or taskbar
To pin an app to the Start screen or taskbar:
1. From the Start menu, click All apps, then select the app that you want to pin.
2. Click Pin to Start or Pin to taskbar to pin your selected app to the Start screen or taskbar.
YoucanalsodragthendropanapptotheStartScreenortaskbartopinit.
Using the Windows® 10 UI
The Windows®10UserInterface(UI)includesthefavoriteStartmenuandthetiled-formattedStart
screen. It includes the following features you can use while working on your Desktop PC.
ASUS Desktop PC 45
ENGLISH
ENGLISH
Start screen
TheStartscreen,whichappearstogetherwiththeStartmenu,helpsorganizealltheappsyouneed
injustoneplace.TheappsontheStartscreenaredisplayedontiled-formatforeasyaccess.
Some apps require signing in to your Microsoft account before they are fully launched.
Click to restore the
Start screen
Moving apps on the Start screen
YoucanmoveappsfromtheStartscreensimplythroughdragginganddroppingtheapptoyour
preferred location.
Unpinning apps from the Start screen
TounpinanappfromtheStartscreen,right-clickontheapptoactivateitssettingsbarthenclick
Unpin from Start.
46 Windows® 10 User Manual
ENGLISH
ENGLISH
Taskbar
Windows® 10 comes with the standard taskbar, which keeps all your currently running apps or
items in the background.
Unpinning apps from the taskbar
1. FromtheStartscreenortaskbar,right-clicktheappyouwanttounpin.
2. Click Unpin from Start or Unpin this program from taskbar to remove the app from the
Start screen or taskbar.
Using the Task View
When you have several running apps, you can click from the taskbar to display all your
running apps, and click on an app or item to launch it.
If task view is disabled, click > Show Task View button to display the task view icon .
ASUS Desktop PC 47
ENGLISH
ENGLISH
Snap feature
The Snap feature displays about four apps or more in one screen, allowing you to work or switch
among apps.
Using Snap
Use your Desktop PC’s mouse or keyboard to activate Snap onscreen.
Using your mouse
a) Launch an app, then drag and release on a screen corner to snap it in place.
b) Snap another app to your preferred location on the screen.
Using your keyboard
a) Launch an app, press and the arrow keys to select the direction where you want to
snap the app in place.
b) Snap another app using and the arrow keys.
48 Windows® 10 User Manual
ENGLISH
ENGLISH
Keyboard shortcuts
Using your keyboard, you can also use the following shortcuts to help you launch apps and
navigate Windows® 10.
Switches between the Start screen and the last running app
+ <D>
Launches the desktop
+ <E>
Launches File Explorer
+ <F> or
+ <W>
Activates the File search function
+ <H>
Launches Share
+ <I>
Launches Settings
+ <K>
Launches Media Connect
+ <L>
Activates the Lock screen
+ <M>
Hides all currently active screens to the taskbar
+ <P>
YourdesktopPCismirroredtoyoursecondarymonitor
+ <Q>
Launches Cortana
+ <R>
Launches the Run window
+ <U>
Launches Ease of Access Center
+ <X>
Launches a menu box of Windows tools
ASUS Desktop PC 49
ENGLISH
ENGLISH
3. Follow the onscreen instructions to complete the reinstallation and reset process.
Removing everything and reinstalling Windows® 10
Restoring your PC to its original factory settings can be done using the Remove everything and
reinstall options in PC Settings. Refer to the steps below to use this option.
Back up all your data before using this option.
This process may take a while to complete.
1. From the Start menu, click Settings > Update & security > Recovery.
2. Scroll down to view the Remove everything and reinstall Windows option. Under this
option, click Get started.
+ <+>
Launchesthemagnierandzoomsinyourscreen.
+<->
Zooms out your screen.
+ <Enter>
Opens the Narrator Settings.
50 Windows® 10 User Manual
ENGLISH
ENGLISH
ASUS contact information
ASUSTeK COMPUTER INC.
Address 15Li-TeRoad,Peitou,Taipei,Taiwan11259
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
E-mail info@asus.com.tw
Web site www.asus.com.tw
Technical Support
Telephone +86-21-38429911
Online support support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site usa.asus.com
Technical Support
Telephone +1-812-282-2787
Supportfax +1-812-284-0883
Online support support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address HarkortStr.21-23,D-40880Ratingen,Germany
Fax +49-2102-959931
Web site asus.com/de
Onlinecontact eu-rma.asus.com/sales
Technical Support
Telephone(Component) +49-2102-5789555
TelephoneGermany(System/Notebook/Eee/LCD) +49-2102-5789557
TelephoneAustria(System/Notebook/Eee/LCD) +43-820-240513
SupportFax +49-2102-959911
Online support support.asus.com
ASUS contact information