Table of Contents
ASUS GR8II-T047Z User Manual
Displayed below is the user manual for GR8II-T047Z by ASUS which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
ROG GR8 II Series
User Guide
REPUBLIC OF
GAMERS
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN
IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identication or
explanation and to the owners’ benet, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you
are entitled to recover damages from ASUS. In each such instance, regardless of the basis
on which you are entitled to claim damages from ASUS, ASUS is liable for no more than
damages for bodily injury (including death) and damage to real property and tangible
personal property; or any other actual and direct damages resulted from omission or failure of
performing legal duties under this Warranty Statement, up to the listed contract price of each
product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in
contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its
suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at https://www.asus.com/support
Revised Edition V3
June 2017
E12903
ROG GR8 II Series
3
Contents
About this manual ............................................................................................. 4
Conventions used in this manual ............................................................... 4
Typography ......................................................................................................... 4
Package contents ............................................................................................... 5
Getting to know your ROG GR8 II
Features ................................................................................................................. 8
Front panel .......................................................................................................... 8
Bottom view .....................................................................................................10
Top view .............................................................................................................10
Rear panel .........................................................................................................12
Using your ROG GR8 II
Getting started .................................................................................................. 16
Positioning your ROG GR8 II .......................................................................16
Connecting the AC power adapter ..........................................................17
Connecting a display panel ........................................................................19
Connecting the keyboard or mouse ........................................................20
Turning on your ROG GR8 II ........................................................................21
Recovering your system.................................................................................22
Performing a recovery option .................................................................... 23
Turning off your ROG GR8 II .........................................................................25
Putting your ROG GR8 II to sleep ................................................................25
Entering the BIOS Setup ................................................................................25
Quickly enter the BIOS .................................................................................. 26
Upgrading your ROG GR8 II
Upgrading memory modules ...................................................................... 28
Upgrading a 2.5-inch storage drive ........................................................... 33
Installing M.2 ......................................................................................................36
Appendix
Safety information ...........................................................................................38
Setting up your system.................................................................................38
Care during use ...............................................................................................39
Regulatory notices ...........................................................................................40
ASUS contact information ............................................................................44
4
ROG GR8 II Series
About this manual
This manual provides information about the hardware and software
features of your PC, organized through the following chapters:
Chapter 1: Getting to know your ROG GR8 II
This chapter details the hardware components of your
ROG GR8 II.
Chapter 2: Using your ROG GR8 II
This chapter provides you with information on using your
ROG GR8 II.
Chapter 3: Upgrading your ROG GR8 II
This chapter provides information on how to upgrade the
memory modules and the storage drive of your ROG GR8 II.
Appendices
This section includes notices and safety statements your ROG
GR8 II.
Conventions used in this manual
To highlight key information in this manual, some text are presented
as follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that
can help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing certain tasks and
prevent damage to your ROG GR8 II's data and components.
Typography
Bold text Indicates a menu or an item to select.
Italic
This indicates sections that you can refer
to in this manual.
ROG GR8 II Series
5
Package contents
NOTE: Actual product specications and package contents may vary
depending on your country or region.
IMPORTANT! Bring the warranty card to the ASUS Service Center
for replacement of the defective components if the device or its
components fail or malfunction during normal and proper use within
the warranty period.
Your ROG GR8 II package contains the following items:
ROG GR8 II Power cable
Technical documentations
AC power adapter
6
ROG GR8 II Series
1
Getting to know your ROG GR8 II
8
ROG GR8 II Series
Features
Front panel
ROG GR8 II Series
9
Power button
The power button allows you to turn the ROG GR8 II on or
o.
Headphone jack
This port allows you to connect amplied speakers or
headphones.
Microphone
The microphone jack is designed to connect to a
microphone used for video conferencing, voice narrations,
or simple audio recordings.
USB 3.1 Gen1 port (with USB charger feature)
This USB 3.1 Gen1 (Universal Serial Bus) port provides a
maximum of 2A output current, transfer rate of up to 5
Gbit/s, and is backward compatible to USB 2.0.
The USB 3.1 Gen1 port with the icon comes with a USB
Charger feature that allows charging of mobile devices
while your ROG GR8 II is operating.
10
ROG GR8 II Series
Bottom view
Rubber feet
The rubber feet helps prevent the ROG GR8 II from
slipping thus providing more stability when the ROG
GR8 II is in a stand-up position.
Top view
ROG GR8 II Series
11
Air vents (intake vent)
The air vents allow cooler air to enter your ROG GR8 II
chassis.
IMPORTANT! For optimum heat dissipation and air
ventilation, ensure that the air vents are free from
obstructions.
Air vents (exhaust vent)
The air vents allow your ROG GR8 II chassis to expel hot
air out.
IMPORTANT! For optimum heat dissipation and air
ventilation, ensure that the air vents are free from
obstructions.
CAUTION! Be careful of the hot air expelled at the
air vents as it may cause discomfort or injuries.
12
ROG GR8 II Series
Rear panel
Drive activity indicator
This indicator lights up when your ROG GR8 II is accessing
the internal storage drives.
Audio Output Jack
This stereo audio jack is used to connect the system’s audio
out signal to amplied speakers.
Digital audio out port (S/PDIF optical)
The Sony/Philips Digital Interface (S/PDIF) optical out port
allows you to transfer digital audio from your ROG GR8 II
into an amplier or your TV.
ROG GR8 II Series
13
LAN port
The eight-pin RJ-45 LAN port supports a standard Ethernet
cable for connection to a local network.
USB 3.1 Gen1 port
This USB 3.1 Gen1 (Universal Serial Bus) port provides a
transfer rate of up to 5 Gbit/s and is backward compatible to
USB 2.0.
Kensington® security slot
The Kensington® security slot allows you to secure your ROG
GR8 II using Kensington® compatible security products.
Power input
The bundled power adapter converts AC power to DC power
for use with this jack. Power supplied through this jack
supplies power to the ROG GR8 II. To prevent damage to the
ROG GR8 II, always use the bundled power adapter.
WARNING! The power adapter may become warm or
hot when in use. Do not cover the adapter and keep it
away from your body.
Air vents (exhaust vent)
The air vents allow your ROG GR8 II chassis to expel hot air
out.
IMPORTANT! For optimum heat dissipation and air
ventilation, ensure that the air vents are free from
obstructions.
CAUTION! Be careful of the hot air expelled at the air
vents as it may cause discomfort or injuries.
USB 3.1 Gen2 port
This USB 3.1 Gen2 (Universal Serial Bus 3.1) port provides a
transfer rate of up to 10 Gbit/s and is backward compatible
to USB 2.0.
14
ROG GR8 II Series
USB 3.1 Gen2 Type-C™ port
This USB Type-C™ (Universal Serial Bus Type-C™) port
provides a transfer rate of up to 10 Gbit/s.
DisplayPort
The DisplayPort sends high-performance digital output
from your ROG GR8 II to a display device such as an LCD TV
or HD monitor.
HDMI port
This port is for the HDMI (High-Denition Multimedia
Interface) connector and is HDCP compliant for HD DVD,
Blu-ray, and other protected content playback.
2
Using your ROG GR8 II
16
ROG GR8 II Series
Getting started
Positioning your ROG GR8 II
When positioning your ROG GR8 II, ensure that the rubber studs or
the rubber feet are in contact with the at and stable surface of your
table or desk.
ROG GR8 II Series
17
Connecting the AC power adapter
To connect the AC power adapter to your ROG GR8 II:
A. Connect the AC power cord to the AC/DC adapter.
B. Connect the DC power connector into your ROG GR8 II’s power
(DC) input port.
C. Plug the AC power cord into a 100V~240V power source.
NOTE: The power adapter may vary in appearance, depending on
your region.
18
ROG GR8 II Series
IMPORTANT!
• WestronglyrecommendthatyouuseonlytheACpoweradapter
and cable that came with your ROG GR8 II.
• UseagroundedwallsocketwhileusingyourROGGR8II.
• ThesocketoutletmustbeeasilyaccessibleandnearyourROG
GR8 II.
• TodisconnectyourROGGR8IIfromitsmainpowersupply,
unplug your ROG GR8 II from the power socket.
• Poweradapterinformation:
- Input voltage: 100-240Vac
- Input frequency: 50-60Hz
- Rating output current: 11.8A max. (230W)
- Rating output voltage: 19V
ROG GR8 II Series
19
Connecting a display panel
You can connect a display panel or projector to your ROG GR8 II that
has the following connectors:
• HDMIconnector
• DisplayPortconnector
To connect a display panel to your ROG GR8 II:
Connect a display cable either to the HDMI or DisplayPort.
Connecting display via HDMI port Connecting display via DisplayPort
20
ROG GR8 II Series
Connecting the keyboard or mouse
You can connect generally any USB keyboard and mouse to your
ROG GR8 II. You can also connect a USB dongle for a wireless
keyboard and mouse set.
To connect a keyboard and mouse to your ROG GR8 II:
Connect the USB cable from your keyboard and mouse to any of the
USB 3.0 ports of your ROG GR8 II.
ROG GR8 II Series
21
Turning on your ROG GR8 II
Press the power button to turn on your ROG GR8 II.
22
ROG GR8 II Series
Recovering your system
Using recovery options on your ROG GR8 II allows you to restore
the system to its original state or simply refresh its settings to help
improve performance.
IMPORTANT!
• This section only applies for models with the bundled operating
system installed in your ROG GR8 II.
• Backup all your data les before doing any recovery option on
your ROG GR8 II.
• Notedownimportantcustomizedsettingssuchasnetwork
settings, user names, and passwords to avoid data loss.
• EnsurethatyourROG GR8 II is plugged in to a power source
before resetting your system.
Windows® 10 allows you to do any of the following recovery options:
• Keepmyles- This option allows you refresh your ROG
GR8 II without aecting personal les (photos, music, videos,
documents).
Using this option, you can restore your ROG GR8 II to its default
settings and delete other installed apps.
• Removeeverything- This option resets your ROG GR8 II to its
factory settings. You must backup your data before doing this
option.
ROG GR8 II Series
23
• Gobacktoanearlierbuild- This option allows you to go back
to an earlier build. Use this option if this build is not working for
you.
• Advancedstartup- Using this option allows you to perform
other advanced recovery options on your ROG GR8 II such as:
- Using a USB drive, network connection or Windows
recovery DVD to startup your ROG GR8 II.
- Using Troubleshoot to enable any of these advanced
recovery options: System Restore, System Image Recovery,
Startup Repair, Command Prompt, UEFI Firmware Settings,
and Startup Settings.
Performing a recovery option
Refer to the following steps if you want to access and use any of the
available recovery options for your ROG GR8 II.
1. Launch Settings and select Update and security.
24
ROG GR8 II Series
2. Under the Update and security option, select Recovery then
select the recovery option you would like to perform.
ROG GR8 II Series
25
Turning off your ROG GR8 II
If your ROG GR8 II is unresponsive, press and hold the power button
for at least four (4) seconds until your ROG GR8 II turns o.
Putting your ROG GR8 II to sleep
To put your ROG GR8 II on Sleep mode, press the Power button once.
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the ROG GR8 II.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
• Anerrormessageappearsonthescreenduringthesystem
bootup and requests you to run the BIOS Setup.
• Youhaveinstalledanewsystemcomponentthatrequiresfurther
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
26
ROG GR8 II Series
Quickly enter the BIOS
To quickly enter the BIOS:
• TurnoyourROGGR8II,thenpressthepowerbuttontoturn
your ROG GR8 II back on , and then press <F2> or <Del> during
POST.
• WhenyourROGGR8IIiso,disconnectthepowercordfrom
your ROG GR8 II’s power connector. Reconnect the power cable
and press the power button to turn on your ROG GR8 II. Press
<F2> or <Del> during POST.
NOTE: POST (Power-On Self Test) is a series of software controlled
diagnostic tests that run when you turn on your PC.
3
Upgrading your ROG GR8 II
28
ROG GR8 II Series
Upgrading memory modules
Your ROG GR8 II comes with two SO-DIMM memory slots that allows
up to two DDR4 SO-DIMMs for a maximum of 32 GB memory.
IMPORTANT!
• YoucanonlyinstallDDR4SO-DIMMtotheROGGR8II’sDIMM
slots.
• OnlyASUS-authorizedtechniciansshouldremoveandinstall
motherboard and mechanical parts inside your ROG GR8 II.
Please refer to the terms and conditions in the warranty card.
• VisitanauthorizedASUSservicecenterorretailerforinformation
on module upgrades for your ROG GR8 II.
NOTE: Refer to http://www.asus.com for the list of compatible
DIMMs.
To install or upgrade the top memory module:
1. Turn o your ROG GR8 II.
2. Disconnect all cables and peripherals.
3. Place the ROG GR8 II on its side on a stable and at surface.
ROG GR8 II Series
29
4. Remove the screws from the top and bottom sides, then
remove the top cover.
5. Slide the side cover towards the rear to detach it from the
chassis then gently lift to remove it from the chassis.
30
ROG GR8 II Series
6. Remove the memory module.
To remove a memory module:
A. Press the retaining clips on each side to release the memory
module.
B. Carefully remove the memory module.
NOTE: Use the same model and speed when replacing the memory
module with a new memory module.
ROG GR8 II Series
31
7. Get the replacement memory module.
8. Install the new memory module into the top slot.
To install a new memory module:
A. Align and insert the memory module into the slot
B. Press the memory module down until it is securely seated in
place.
32
ROG GR8 II Series
9. Replace the side cover then slide it towards the front of ROG
GR8 II to re-attach.
10. Replace the top cover and secure it with the screws removed
earlier, then secure the bottom screw.
ROG GR8 II Series
33
Upgrading a 2.5-inch storage drive
The ROG GR8 II supports one 2.5-inch HDD or one 2.5-inch SSD for
additional storage capacity.
To upgrade a 2.5-inch HDD or SSD:
1. Follow steps 1 to 5 from the Upgrading memory modules section
to remove the side cover.
2. Remove the screw from the drive bay, then put it aside for later
use.
3. Lift the ap on the SATA connector.
4. Connect the SATA cable to the SATA connector, then push the
ap down to secure the cable.
34
ROG GR8 II Series
5. Secure the HDD/SSD to the brackets using the bundled four
bracket screws. Ensure that the screw holes on the 2.5-inch
HDD/SSD match the screw holes on the bracket.
NOTE: Ensure to secure the R-bracket and L-bracket to the correct
sides, as seen in the illustration below, with the screw hole labeled
2 on the bracket positioned with the screw holes on the HDD/SSD
closest to the connector.
IMPORTANT! The screws sets may vary in size. Ensure to use the
correct screws.
HDD/SSD
R-bracket
L-bracket
HDD/SSD screw hole
Bracket screw hole
ROG GR8 II Series
35
6. Carefully place the HDD/SSD and bracket assembly into the
drive bay.
7. Connect the HDD/SSD connector cable to the HDD/SSD.
8. Secure the HDD/SSD and bracket assembly to the drive bay
using the bundled three HDD drive bay screws and the one
screw removed earlier.
IMPORTANT! The screws sets may vary in size. Ensure to use the
correct screws.
9. Follow steps 9 and 10 from the Upgrading memory modules
section to replace the side cover.
36
ROG GR8 II Series
Installing M.2
The ROG GR8 II supports one M.2 SSD for additional storage
capacity.
To install an M.2 SSD:
1. Follow steps 1 to 5 from the Upgrading memory modules section
to remove the side cover.
2. Connect your M.2 SSD to the M.2 connector.
3. Align the screw hole on the M.2 SSD to the screw hole in your
ROG GR8 II and secure it with a screw.
4. Follow steps 9 and 10 from the Upgrading memory modules section
to replace the side cover.
Appendix
38
ROG GR8 II Series
Safety information
Your ROG GR8 II is designed and tested to meet the latest standards
of safety for information technology equipment. However, to
ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
• Readandfollowallinstructionsinthedocumentationbeforeyou
operate your system.
• Donotusethisproductnearwateroraheatedsource.
• Setupthesystemonastablesurface.
• Openingsonthechassisareforventilation.Donotblockorcover
these openings. Make sure you leave plenty of space around the
system for ventilation. Never insert objects of any kind into the
ventilation openings.
• Usethisproductinenvironmentswithambienttemperatures
between 0˚C and 35˚C.
• Ifyouuseanextensioncord,makesurethatthetotalampere
rating of the devices plugged into the extension cord does not
exceed its ampere rating.
• Thisequipmentshouldbeinstalledandoperatedwitha
minimum distance of 20cm between the radiator and your body.
Marketing Name: GR8 II Series
Model Name / Certification Name: GR8 II
ROG GR8 II Series
39
NO DISASSEMBLY
The warranty does not apply to the products that
have been disassembled by users
DO NOT throw the ROG GR8 II in municipal waste. This product has
been designed to enable proper reuse of parts and recycling. This
symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment, and mercury-containing button
cell battery) should not be placed in municipal waste. Check local
technical support services for product recycling.
Lithium-Metal Battery Warning
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Care during use
• Donotwalkonthepowercordorallowanythingtorestonit.
• Donotspillwateroranyotherliquidsonyoursystem.
• Whenthesystemisturnedo,asmallamountofelectrical
current still ows. Always unplug the power cord from the power
outlets before cleaning the system.
• Ifyouencounterthefollowingtechnicalproblemswiththe
product, unplug the power cord and contact a qualied service
technician or your retailer.
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not function properly even if you follow
the operating instructions.
– The system was dropped or the cabinet is damaged.
– The system performance changes.
40
ROG GR8 II Series
Regulatory notices
REACH
Complying with the REACH (Registration, Evaluation, Authorization,
and Restriction of Chemicals) regulatory framework, we publish
the chemical substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment
to the highest standards for protecting our environment. We believe
in providing solutions for you to be able to responsibly recycle our
products, batteries, other components, as well as the packaging
materials. Please go to http://csr.asus.com/english/Takeback.htm
for the detailed recycling information in dierent regions.
COATING NOTICE
IMPORTANT! To provide electrical insulation and maintain electrical
safety, a coating is applied to insulate the device except on the areas
where the I/O ports are located.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincluding
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with manufacturer’s instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
ROG GR8 II Series
41
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdierentfrom
that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianfor
help.
IMPORTANT! Outdoor operations in the 5.15~5.25 GHz band is
prohibited. This device has no Ad-hoc capability for 5250~5350 and
5470~5725 MHz.
CAUTION! Any changes or modications not expressly approved by
the grantee of this device could void the user’s authority to operate
the equipment.
ISED Radiation Exposure Statement for Canada
This equipment complies with ISED radiation exposure limits set
forth for an uncontrolled environment. To maintain compliance with
ISED RF exposure compliance requirements, please avoid direct
contact to the transmitting antenna during transmitting. End users
must follow the specic operating instructions for satisfying RF
exposure compliance.
Operation is subject to the following two conditions:
• Thisdevicemaynotcauseinterferenceand
• Thisdevicemustacceptanyinterference,includinginterference
that may cause undesired operation of the device.
42
ROG GR8 II Series
Wireless Operation Channel for Dierent Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
RF exposure warning
This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure
compliance.
Compliance Statement of Innovation, Science and
Economic Development Canada (ISED)
This Class B digital apparatus complies with Canadian ICES-003, RSS-
210, and CAN ICES-3(B)/NMB-3(B).
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Déclaration de conformité de Innovation, Sciences et
Développement économique Canada (ISED)
Cet appareil numérique de classe B est conforme aux normes
canadiennes ICES-003, RSS-210 et CAN ICES-3(B)/NMB-3(B).
Cet appareil est conforme aux normes CNR exemptes de licence
d’Industrie Canada. Le fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil ne doit pas provoquer
d’interférences et (2) cet appareil doit accepter toute interférence, y
compris celles susceptibles de provoquer un fonctionnement non
souhaité de l’appareil.
ROG GR8 II Series
43
Regional notice for Singapore
This ASUS product complies with IMDA
Standards.
Complies with
IMDA Standards
DB103778
CIDF15000026
Regional notice for Malaysia
Regional notice for California
WARNING
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
ENERGY STAR complied product
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save money
and protect the environment through energy
ecient products and practices.
All ASUS products with the ENERGY STAR logo
comply with the ENERGY STAR standard, and the
power management feature is enabled by default. The monitor and
computer are automatically set to sleep after 10 and 30 minutes of
user inactivity. To wake your computer, click the mouse or press any
key on the keyboard.
Please visit http://www.energystar.gov/powermanagement for
detail information on power management and its benets to the
environment. In addition, please visit http://www.energystar.gov for
detail information on the ENERGY STAR joint program.
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based
products.
44
ROG GR8 II Series
Manufacturer ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112,
TAIWAN
Authorised
representative in
Europe
ASUSTeK Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY
ASUS contact information
ASUSTeK COMPUTER INC.
Address 4F, No. 150, Li-Te Road, Peitou, Taipei 112, Taiwan
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
Web site www.asus.com/
Technical Support
Telephone +86-21-38429911
Fax +86-21-5866-8722, ext. 9101#
Online support http://qr.asus.com/techserv
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site http://www.asus.com/us/
Technical Support
Support fax +1-812-284-0883
Telephone +1-812-282-2787
Online support http://qr.asus.com/techserv
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen, Germany
Fax +49-2102-959911
Web site http://www.asus.com/de
Online contact http://eu-rma.asus.com/sales
Technical Support
Telephone +49-2102-5789555
Support Fax +49-2102-959911
Online support http://qr.asus.com/techserv
ROG GR8 II Series
45
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: Asus Computer International
Address: 800 Corporate Way, Fremont, CA 94539.
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : Desktop PC
Model Number :GR8 II
Conforms to the following specifications:
FCC Part 15, Subpart B, Unintentional Radiators
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Representative Person’s Name : Steve Chang / President
Signature :
Original Declaration Date : Dec. 01, 2016
Corrected Declaration Date : Jun. 14, 2017
Ver. 170324
46
ROG GR8 II Series