ASUS MB16AP User Manual
Displayed below is the user manual for MB16AP by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ZenScreen Go MB16AP
Portable USB Monitor
Hybrid Signal Solution
User Guide
ii
Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
Table of contents
Notices ......................................................................................................... iii
Safety information ...................................................................................... iv
Care & cleaning ............................................................................................ v
Takeback services ...................................................................................... vi
Caution ........................................................................................................ vi
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-2
1.3.1 Front View and Charging Instructions ............................. 1-2
1.3.2 QuickFit Function ............................................................ 1-4
2.1 Monitor standing positions ......................................................... 2-1
2.2 Connect the USB monitor with system ...................................... 2-2
2.3 Announcements ........................................................................... 2-4
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-2
3.2 Specications ............................................................................. 3-11
3.3 Troubleshooting (FAQ) .............................................................. 3-12
3.4 Supported Timing List ............................................................... 3-13
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
• Before setting up this Portable USB Monitor, carefully read all the
documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB
Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are
correctly connected and the power cables are not damaged. If you
detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this
Portable USB Monitor in any area where it may become wet. Place this
Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this
Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor,
contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies
with LPS and SELV circuit according to IEC60950-1:2005.
• DO NOT dispose of the product in fire
• DO NOT use monitor near heating equipment or in places where there
is likelihood of high temperature
• Keep your monitor away from sharp objects
• DO NOT place objects on top of your monitor
v
Care & cleaning
• Cleaning. Turn your monitor off and unplug the cable. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vi
Takeback services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail
recycling information in different region.
Caution
We suggest to use the attached pen or any pen or stick that can fit in the
hole at the corner as a simple stand for the monitor.
Please reserve at least 10cm/4 inch of the pen at the back of the monitor
to stabilize.
Please be noted the pen attached has no Touch function.
≥10 cm
1-1
ASUS USB Type-C Monitor MB16AP
1.1 Welcome!
Thank you for purchasing the ASUS® Portable USB Monitor!
The latest ASUS Portable USB Monitor provides great portability and
simplicity to your daily life, enhancing both of your viewing experience and
style.
1.2 Package contents
Check your package for the following items:
Portable USB Monitor
Quick Start Guide
Warranty Card
USB Type-C Cable
Smart Cover
USB Type-C to A Adapter
Pen
Power Adapter
• If any of the above items is damaged or missing, contact your retailer
immediately.
• Inbox pen is not included in the warranty.
1-2 Chapter 1: Product Introduction
1.3 Monitor introduction
1.3.1 Front View and Charging Instructions
5
1
2
4 3
Menu
Input Device
1. Pen hole
• Use the attached pen to insert into the hole, the monitor can stand up
directly without the smart cover.
2. Power
button/Power LED
• Press this button to turn the monitor on/off when connected to a valid
source.
• The color definition of the power indicator is as the below table.
Status Description
Blue ON/Standby mode
Dark OFF
Red Charging Mode
Green Finished charging
3. Menu button
• Press this button to enter OSD when in connection to a valid source
• Long pressing the button allows you to have a quick check on battery %
even the device is OFF.
1-3
ASUS USB Type-C Monitor MB16AP
4. Shortcut
• This is a shortcut. Default is Input Device.
• Long pressing the button allows you to have a quick check on battery %
even the device is OFF.
5. USB Type-C port
• Used to connect to a valid source such as PC or mobile phone for
monitor to work when there’s enough power
• Used to do battery charging when the monitor is in OFF mode
• Up to 9V@2A 18W power supply, signal input supported, maximum
resolution 1920 x 1080@60Hz
IMPORTANT:
• Charge the monitor for 4 hours before using it for the first time
• Use only bundled power adapter and USB cable to charge your
monitor. Using different power adapter and cable might bring potential
damage to your device.
WARNING: The adapter may become warm to hot while in use.
DO NOT cover the adapter and keep it away from your body while
it is connected to a power source. If your device become unusual
hot, disconnect the USB cable from your device and send the
device including the power adapter and USB cable to an ASUS
qualified service personnel
1-4 Chapter 1: Product Introduction
1.3.2 QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment grid 1 will be rotated automatically if auto rotation is
enabled.
Alignment Grid1
Alignment Grid1
Alignment Grid1
Alignment Grid1
• Auto rotation function is only working under Windows OS by installing
DisplayWidget software.
Alignment Grid2
2. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
3x5
4x6
2-1
ASUS USB Type-C Monitor MB16AP
2.1 Monitor standing positions
You can stand up the monitor by several positions with the smart cover.
B
C
A
2-2 Chapter 2: Setup
2.2 Connect the USB monitor with system
or
or
Type-C
B
A
Type-C
C
1
2
3
4
Type-C
Type-A
driver
2-3
ASUS USB Type-C Monitor MB16AP
In case the computer does not support Type-C interface but only USB3.0
interface, please install the official driver from ASUS website firstly.
Please make sure the USB Type-C cable and Type-C to A adapter is
connected between the USB monitor and the system.
When in connection with mobile devices, please go to ASUS website or
Google Play Store to download the latest APP, please install APP before
use.
• Please check ASUS website for latest driver and DisplayWidget software.
2-4 Chapter 2: Setup
2.3 Announcements
As this product and attached smart cover includes magnet in the structure,
there could be potential risk to cause the damage of computer hard disc
and objects that are sensitive to magnet.
Please ensure not to stack the product with the computer when computer
is in use (power on or standby mode) otherwise the hard drive could
possibly be influenced by the result of permanent data missing or the
computer display could be switched off due to computer auto protection
mechanism. When place this product together with computer in the bag,
must have the computer power off to avoid possible hard drive damage
problem.(Check Picture A)
The battery capacity will vary depending on the environment temperature,
humidity, and monitor usage
The battery used in this device may present a risk of fire or chemical burn
if removed or dissembled
Risk of explosion if the battery is placed by an incorrect type
Never attempt to short-circuit your monitor battery
Never attempt to disassemble and reassemble the monitor battery
Discontinue usage if leakage is found
The battery and its components must be recycled or disposed of properly
Keep the battery and other small components away from children
Picture A
3-1
ASUS USB Type-C Monitor MB16AP
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Reading Mode
Darkroom Mode
ECO Mode
Splendid
Standard Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Scenery Mode
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 19%
S
1. Press the MENU button to activate the OSD menu.
2. Press the button to toggle between options in the Menu. As you
move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu press the button.
4. Press the button to select the desired parameter.
5. Press the button to enter the slide bar and then use the
button, according to the indicators on the menu, to make your
changes.
6. Select the to return to previous menu or to accept and return
to previous menu.
• ：Get power from source when this icon is shown
• ：Battery power
3-2 Chapter 3: General Instruction
3.1.2 OSD Function Introduction
1. Splendid
This function contains nine sub-functions that you can select for your
preference.
Reading Mode
Darkroom Mode
ECO Mode
Splendid
Standard Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Scenery Mode
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 19%
S
• Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
• Reading Mode : This is the best choice for book reading.
• Darkroom Mode : This is the best choice for a weak ambient light
environmen.
• ECO Mode: Activate the ecology mode for power saving.
3-3
ASUS USB Type-C Monitor MB16AP
• In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
• In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
• In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,
and Color Temp functions are not user-configurable.
• In the ECO Mode, the Saturation, SkinTone, ASCR, Sharpness, contrast, and
Brightness functions are not user-configurable.
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
S
Blue Light Filter
Level 1
Level 2
Level 3
Level 4
Level 0
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
• Level 0: No change.
• Level 1~4: The higher the level,the more blue light will be reduced.
• When Blue Light Filter is activated,the default settings of Standard Mode will
be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-configurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
3-4 Chapter 3: General Instruction
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If
eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular
Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
3. Color
Select the image color you like from this function.
Color
S
Brightness
Contrast
Saturation
Color Temp.
Skin Tone
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
3-5
ASUS USB Type-C Monitor MB16AP
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel and
ASCR from this main function.
S
Sharpness
Aspect Control
VividPixel
A
Trace Free
SCR
Image
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• 4:3 is only available when input source is in 4:3 format.
5. System Setup
Adjusts the system configuration.
3-6 Chapter 3: General Instruction
S
QuickFit
OSD Setup
More
Input Device
Input Device Pop-up
GamePlus
Auto Rotation
System Setup
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
Splendid Demo M ode
S
System Setup
Key Lock
Information
Power Key Lock
All Reset
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
Language
• Splendid Demo Mode: Activate the demo mode for the Splendid
function.
• Auto Rotation: To enable/disable rotate image automatically.Please be
noted that Auto rotation function is only working under Windows OS by
installing DisplayWidget software.
• Input Device Pop-up : To enable/disable Input Device & Power Supply
from PC pop-up questions WHENEVER in connection.
• Input Device :
3-7
ASUS USB Type-C Monitor MB16AP
Select “Mobile” if connect to mobile phone ( Power supply function is not
provided under “Mobile” due to common mobile devices cannot provide
enough power output ). Select “PC” if connect to PC and then select
“Power Supply from PC” with charging function. This function allows you
to sustain the working time for longer.In PC sub-function, you can disable
power supply function by selecting “ No Need Power* from PC”
* No Need Power here means getting power under 100mA, and this does not affect the battery life/usage of
host devices connected.
• GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Chrosshair function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
• Select ON to enter the GamePlus main menu.
• Press to select between Chrosshair, Timer and Display Alignment
function.
• Press to confirm the function you choose. Select to go off, and
exit.
3-8 Chapter 3: General Instruction
GamePlus main menu
GamePlus
Timer Display Alignment
Crosshair
（Practive Mode）
GamePlus-Crosshair
GamePlus-Timer
Position
• QuickFit: See page 1-3 for details.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
•
3-9
ASUS USB Type-C Monitor MB16AP
• More: Return the next page of System Setting.
• Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai and Indonesian.
• Key Lock: Disable all key functions. Pressing the menu button for more
than five seconds to disable key lock function.
• Information:Displays the monitor information.
• Power Key Lock: To disable / enable power key.
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-10 Chapter 3: General Instruction
6. Shortcut
Selecting this option allows you to set shortcut key.
S
Shortcut
Blue Light Filter
Splendid
Brightness
Contrast
Auto Rotation
Color Temp.
QuickFit
Input Device
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
• Shortcut : User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “Contrast”, “Auto Rotation”, “Color Temp.”,
“QuickFit”, “Input Device” and set as shortcut key.
7. MyFavorite
Load/Save all settings on the monitor.
S
MyFavorite
Setting 1
Setting 2
Load
Save
Setting 3
Setting 4
Standard Mode USB 1920x1080@60Hz
ASUS MB16A 90%
3-11
ASUS USB Type-C Monitor MB16AP
3.2 Specications
Model MB16AP
Panel Size 15.6” (16:9, 39.62cm) wide screen
Resolution 1920 x 1080
Brightness (Typ.) 220 cd/m
2
Contrast (Typ.) 800:1
Display Colors 262 K
Digital Input DisplayPort™ Alt Mode for USB Type-C™
Colors Dark Gray
Power Consumption ≦ 9 W
Operating Temp. 5°C ~ 35°C
Operating Humidity 20-90% RH
Phys. Dimension (WxHxD) 359.7 x 226.4 x 8.0 mm
Box Dimension (WxHxD) 485 x 305 x 76 mm
Net Weight (Esti.) 0.86 kg
Gross Weight (Esti.) 3.1 kg
Regulation Approvals
UL/cUL, CB, CE, CCC, KCC, FCC, BSMI, EAC(CU),
RCM, VCCI, J-Moss, UkrSEPRO, RoHS, WEEE,
Windows 7 & 8.1 & 10 WHQL, Blue light filter, Flicker
free，BIS
Voltage Rating 5 - 9V , 2.0A
QC3.0 charging spec is supported
Adapter
ASUS/AD2068M20
100-240V~50/60Hz 0.5A
5V ,2A(Normal model）
OR 9V , 2A(Quick charge model）
*Specifications are subject to change without notice.
3-12 Chapter 3: General Instruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is
in the ON mode.
• Check the "Power Indicator" option in the
OSD main menu, select the "ON" option and
the power LED indicator lights up.
• Check if the Type-C port connected to source
of signal.
• Check if the signal source is ON.
• Connect to the ASUS adapter and check if the
battery is low; if so, charge the battery before
using it.
The power LED lights blue
and there is no screen image
• Check if the monitor and the computer are in
the ON mode.
• Make sure the USB Type-C cable is properly
connected between the Portable USB Monitor
and the computer.
• Inspect the signal cable and make sure none
of the pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or
dark
• Adjust the Brightness settings via the button.
Screen image bounces or a
wave pattern is present in the
image
• Make sure the USB Type-C cable is properly
connected between the Portable USB Monitor
and the computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color
defects (white does not look
white)
• Inspect the USB Type-C cable and make sure
that none of the pins are bent.
3-13
ASUS USB Type-C Monitor MB16AP
The monitor automatically
turns off
• The monitor automatically turns off when the
battery power is zero. Please connect to the
ASUS adapter and check if the battery is low;
if so, charge the battery before using it.
• Please check if the source of signal went
into sleep mode. The monitor automatically
turns off after the signal source slept for
more than 15 seconds to save power
consumption.
The signal source is shown in
power supply mode
• The monitor will get a small amount of
electricity from the signal source. This is
normal.
3-14 Chapter 3: General Instruction
3.4 Supported Timing List
PC Supported Primary Timing
Resolution Refresh Rate Horizontal Frequency
640x480 60Hz 31.469kHz
800x600 60Hz 37.879kHz
1024x768 60Hz 48.363kHz
1280x960 60Hz 60kHz
1280x1024 60Hz 63.981kHz
1440x900 60Hz 55.935kHz
1680x1050 60Hz 65.29kHz
1920x1080 60Hz 67.5kHz
VESA Modes, User Available Timing
Resolution Refresh Rate Horizontal Frequency
848x480 60Hz 31.02kHz
1280x720 60Hz 44.772kHz
1280x800 60Hz 49.702kHz
1920x1080 60Hz 66.587kHz