Table of Contents
- Notices
- Safety information
- Care & Cleaning
ASUS PA279CV User Manual
Displayed below is the user manual for PA279CV by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
PA279CV Series
LCD Monitor
User Guide
ii
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices ......................................................................................................... iv
Safety information ....................................................................................... v
Care & Cleaning ......................................................................................... vii
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor .............................................................. 1-2
1.4 Connect cables ............................................................................. 1-3
1.4.1 Rear of the LCD monitor ................................................. 1-3
1.5 Monitor introduction .................................................................... 1-4
1.5.1 Using the Controls button .............................................. 1-4
2.1 Adjusting the monitor .................................................................. 2-1
2.2 Detaching the arm/stand (for VESA wall mount) ...................... 2-2
2.3 Outline dimension ........................................................................ 2-3
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 Howtorecongure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-2
3.2 Specications ............................................................................. 3-13
3.3 Troubleshooting (FAQ) .............................................................. 3-14
3.4 Supported Timing List ............................................................... 3-15
iii
A third-party certification according to ISO 14024
Say hello
to a more sustainable product
IT products are associated with a wide range of sustainability risks
throughout their life cycle. Human rights violations are common in the
factories. Harmful substances are used both in products and their
manufacture. Products can often have a short lifespan because of poor
ergonomics, low quality and when they are not able to be repaired or
upgraded.
This product is a better choice. It meets all the criteria in TCO Certified,
the world’s most comprehensive sustainability certification for IT
products. Thank you for making a responsible product choice, that help
drive progress towards a more sustainable future!
Criteria in TCO Certified have a life-cycle perspective and balance
environmental and social responsibility. Conformity is verified by
independent and approved verifiers that specialize in IT products, social
responsibility or other sustainability issues. Verification is done both
before and after the certificate is issued, covering the entire validity
period. The process also includes ensuring that corrective actions are
implemented in all cases of factory non-conformities. And last but not
least, to make sure that the certification and independent verification is
accurate, both TCO Certified and the verifiers are reviewed regularly.
Want to know more?
Read information about TCO Certified, full criteria documents, news and
updates at tcocertified.com. On the website you’ll also find our Product
Finder, which presents a complete, searchable listing of certified
products.
Toward sustainable IT products
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
The device may fall, causing serious personal injury or death. To prevent
injury,thisdevicemustbesecurelyattachedtotheoor/wallinaccordance
with the installation instructions.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
• Provide an earthing connection before the mains plug is connected to
the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.
vi
WARNING
Usageofotherthanspeciedhead-orearphonescanresultinhearing
loss due to excessive sound pressures.
vii
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
viii
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
1-1
ASUS LCD Monitor PA279 Series
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2 Package contents
Check your package for the following items:
LCD Monitor
Stand/Base
Quick Start Guide
Warranty Card
1 x USB Type-C Cable(optional)
1x Power Cord
1x HDMI Cable (optional)
1x DP Cable (optional)
Color calibration testing report
ProArt welcome card
• If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
1. Align the screw hole on the arm with the bundled screw on the base.
Then insert the base into the arm.
2. Fix the base to the arm by fastening the bundled screw.
1
2
*Base screw size: M6 x 17mm
1-3
ASUS LCD Monitor PA279 Series
1.4 Connect cables
1.4.1 Rear of the LCD monitor
1 2 3 4 5 6 7 8 9
10
11
1. AC-IN Port
2. Power Switch
3. HDMI1 Port
4. HDMI2 Port
5. DP - in Port
6. USB3.1 Type-C
7. Earphone - out Port
8. USB3.1 Type A
9. USB3.1 Type A
10. USB3.1 Type A
11. USB3.1 Type A
This monitor is Super-Speed USB 3.1 compatible (5 Gbps). The port offers
Max. 65W power delivery with output voltage 5V/3A, 9V/3A, 12V/3A,
15V/3A and 20V/3.25A. Connecting the USB Type-C cable can input
the DisplayPort source, output power and enable the USB Type-A ports
(downstream) on the monitor. Connecting the USB Type-C to Type-A
cable only enables the USB Type-A ports (downstream) on the monitor.
1-4 Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the bottom of the monitor to adjust the image
settings.
6 5 4 3 2 1
1. Power button/power indicator:
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Menu button:
• Press this button to display the OSD menu when the OSD is off.
• Enters the OSD menu.
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
3. Close Button:
• Press this button to display the OSD menu when the OSD is off.
• Exit the OSD menu.
4. Input Select Button
• Use this hotkey to switch from HDMI-1, HDMI-2, DisplayPort, USB
Tpye-C and Enable/Disable Auto Source Detection input signal.
1-5
ASUS LCD Monitor PA279 Series
5. Shortcut 1:
• Press this button to display the OSD menu when the OSD is off.
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6. Shortcut 2:
• Press this button to display the OSD menu when the OSD is off.
• Default: Blue light filter hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.
2-1
ASUS LCD Monitor PA279 Series
2.1 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling
when you change its
angle.
• Youcanadjustthemonitor’sanglefrom+35˚to-5˚anditallows45˚
swivel adjustment from either left or right.
-5 ~ 35
90°
90°
150mm
-45° +45°
2-2 Chapter 2: Setup
2.2 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the monitor
facedown on its EPS packaging.
2. Press the quick release button from rear cover.
3. Detach the stand (arm and base) from the monitor.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).
2-3
ASUS LCD Monitor PA279 Series
2.3 Outline dimension
Unit: mm
3-1
ASUS LCD Monitor PA279 Series
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
User Mode 2
ProArtPreset
ProArt
Preset
Darkroom Mode
Rapid Rendering Mode
User Mode 1
Reading Mode
DICOM Mode
Scenery Mode
ProArtPreset
ProArt
Preset
Rec. 709 Mode
DCI-P3 Mode
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
HDR
sRGB Mode
Standard Mode
1. Press any button (except the Power button) to display the OSD menu.
2. Press the Menu button to activate the OSD menu.
3. Press the buttons as indicated on the screen to navigate through the
functions. Highlight the desired function and press to activate
it. If the function selected has a sub-menu, pressand again to
navigate through the sub-menu functions. Highlight the desired sub-
menu function and press to activate it.
4. Press and to change the settings of the selected function.
5. To exit and save the OSD menu, press or repeatedly until the
OSD menu disappears. To adjust other functions, repeat steps 1-4.
3-2 Chapter 3: General Instruction
3.1.2 OSD Function Introduction
1. ProArtPreset
This function contains twelve sub-functions that you can select for
your preference.
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
User Mode 2
ProArtPreset
ProArt
Preset
Darkroom Mode
Rapid Rendering Mode
User Mode 1
Reading Mode
DICOM Mode
Scenery Mode
ProArtPreset
ProArt
Preset
Rec. 709 Mode
DCI-P3 Mode
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
HDR
sRGB Mode
Standard Mode
• Standard Mode: Best choice for document editing.
• sRGB Mode: Compatible with sRGB color space, sRGB mode is the best
choice for document editing.
• Rec. 709 Mode: Compatible with Rec. 709 color space.
• DCI-P3 Mode: Compatible with DCI-P3 color space.
• HDR: High Dynamic Range. Contains three HDR modes (PQ Optimized,
PQ 350, and PQ Basic).
• DICOM Mode: Compatible with DICOM color space.
• Scenery Mode: Best choice for scenery photo display.
• Reading Mode: This is the best choice for book reading.
• Darkroom Mode: This is the best choice for a weak ambient
lightenvironment.
3-3
ASUS LCD Monitor PA279 Series
• Rapid Rendering Mode: Simulates display as high refresh rate
performance to generate different backlight frequencies.
Rapid Rendering Mode can only be activated at 60Hz.
To activate this function, you need to do the following: turn off
Adaptive-Sync. Brightness and ASCR cannot be adjusted when
using this function.
• User Mode 1: Allows you to make color adjustments in the Advanced
Setting.
• User Mode 2: Allows you to make color adjustments in the Advanced
Setting.
• ASCR is not user-configurable in standard, sRGB, Rec.709, DCI-P3, HDR,
DICOM, and Rapid Rendening Mode.
• Gamma is not user-configurable in sRGB, DCI-P3, HDR, DICOM and scenery
Mode.
• Color Temp., brightness, contrast, saturation, hue, ProArt Palette/Color and black
level are not user-configurable in sRGB mode.
Color Engine Standard
Mode
sRGB
Mode
Rec. 709
Mode
DCI-P3
Mode
HDR DICOM
Mode
Scenery
Mode
Reading
Mode
Darkroom
Mode
Rapid
Rendering
Mode
User
Mode 1
User
Mode 2
Color Temp. V NA V V (*1) NA V (*2) V NA V V V V
Brightness V NA V V NA V V V V V V V
Contrast V V V V NA V V V V V V V
ASCR NA NA NA NA NA NA V V V NA V V
Sharpness V V V V V V V V V V V V
Saturation V NA V V NA V V NA V V V V
Hue V NA V V NA V V NA V V V V
ProArt Palette/
Color
V NA V V NA V V V V V NA NA
Black Level V V V V NA V V V V V NA NA
Gamma V NA V NA NA NA NA V V V V V
V: adjustable
NA: function disabled
(*1) 6500K & P3-Theater(default) only
(*2) 6500K(default) & 9300K only
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
3-4 Chapter 3: General Instruction
Blue Light Filter
ProArt
Preset
Level 0
Level 1
Level 2
Level 3
Level 4
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Level 0: No change
• When Blue Light Filter is activated,the default settings of Standard Mode will
be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-configurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If
eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular
Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
3-5
ASUS LCD Monitor PA279 Series
3. ProArtPalette
ProArtPalette
ProArt
Preset
Brightness
Contrast
Gamma
Black Level
Saturation
Hue
Color Temp.
ProArtPalette
ProArt
Preset
Color
Color Reset
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Hue: Shifts the image color between green and purple
• Color Temp.: Contains five preset color modes 9300K, 6500K, 5500K,
5000K and P3-Theater.
• Gamma: Contains five gamma modes including 1.8, 2.0, 2.2, 2.4, 2.6.
• Black Level: To adjust the initialized 1st signal level of darkest gray level.
• Color:
* Six-axis Hue adjustment.
* Six-axis Saturation adjustment.
* Adjusts the gain levels for R, G, B.
* Adjusts the black level offset values for R, G, B.
3-6 Chapter 3: General Instruction
P3-Theater is only available when DCI-P3 Mode is selected.
• Color Reset:
* Current mode color reset:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.
4. Image
You can adjust Sharpness, Trace Free, Aspect Control, Input Range
and ASCR from this main function.
Image
ProArt
Preset
Sharpness
Trace Free
Aspect Control
Input Range
ASCR
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to Full, 4:3, 1:1, OverScan.
4:3 is only available when input source is in 4:3 format. OverScan
is only available for the HDMI input source.
• Input Range: Adjust input range to Auto, Full and Limited 16-235.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
3-7
ASUS LCD Monitor PA279 Series
5. Sound
You can adjust Volume, Mute and Source from this main function.
Sound
ProArt
Preset
Volume
Mute
Source
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Volume : Adjusts the output volume level.
• Mute : Select audio mute ON or OFF.
• Source : decides the monitor sound comes from which source.
6. PIP/PBP Setting
The PIP/PBP Setting allows you to open up sub-window(s) connected
from any video source.
PIP/PBP Setting
ProArt
Preset
PIP/PBP Mode
PIP/PBP Source
PIP Size
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• PIP/PBP Mode: Select PIP, PBP or turn it off.
• PIP/PBP Source: Selects the video input source among, “HDMI-1”,
“HDMI-2”, DisplayPort or USB Type-C.
• PIP Size: Adjust the PIP size to “Small”, “Middle”, or “Large”.
3-8 Chapter 3: General Instruction
• Main source and sub source are available as following table.
Sub source
HDMI-1 HDMI-2 DisplayPort USB Type-C
Main Source
HDMI-1 NA NA OK OK
HDMI-2 NA NA OK OK
DisplayPort OK OK NA NA
USB Type-C OK OK NA NA
7. Input Select
Select the input source from HDMI-1, HDMI-2, DisplayPort, USB
Type-C. Enable/Disable Auto Source Detection input signal.
Input Select
ProArt
Preset
HDMI-1
HDMI-2
DisplayPort
USB Type-C
Auto Source Detection
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
3-9
ASUS LCD Monitor PA279 Series
8. System Setup
System Setup
ON
Language
Power Indicator
Information
All Reset
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
System Setup
Adaptive-Sync
USB Setup
Power Saving
OSD Setup
QuickFit
DisplayPort Stream
Key Lock
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
• Adaptive-Sync: It can allow a Adaptive-Sync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
1. *For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
2. To activate this function, you need to do the following: set
DisplayPort Stream to DisplayPort 1.2, turn off Rapid Rendering
Mode.
• USB Setup: Configures the USB Type C port setting. The USB
Setup parameter affects the output resolution only when the source is
connected to the USB Type C port. Due to the technological differences
between USB 2.0 and USB 3.1, THE maximum USB data throughput
(bandwidth and other related characteristics) varies and therefore
influences the maximum output resolution.
3-10 Chapter 3: General Instruction
*USB3.1:Thedatatransferrateaccordingtothe3.1specication
in USB Type C port can only output the maximum resolution of
4K2K 30Hz.
*USB2.0:Thedatatransferrateaccordingtothe2.0specication
in USB Type C port can output the maximum resolution of 4K2K
60Hz.
• The data transfer rate will remain USB 3.1 when using USB Type C to A
cable.
• The USB Setup setting does not affect the resolution if the source is
connected to the DisplayPort or HDMI port.
• Power Saving: Select normal level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the
OSD screen.
• QuickFit: Allows users to have a preview of the document or photo
layout directly on screen without printing test copies.
3-11
ASUS LCD Monitor PA279 Series
*
5
5
10
10
15
15 20 25
Ruler: This pattern presents physical ruler on top and left side. You
can press the Return button for longer than 3 seconds to switch
the measurements between metric and imperial.
30
* Alignment: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
* A4: Provides users to view their documents in real size on the
screen.
* B5: Provides users to view their documents in real size on the
screen.
B5
• DisplayPort Stream: Select DP 1.1 if your graphics card is not
compatible with DP 1.1.
• Key Lock: Disable all key functions. Pressing the down button for more
than five seconds to disable key lock function.
• Power Indicator: Turn the power LED indicator on/off.
• language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai, Indonesian.
• Information: Displays the monitor information.
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-12 Chapter 3: General Instruction
9. Shortcut
Selecting this option allows you to set two shortcut keys. User can
select from Blue Light Filter, Brightness, Contrast, PIP/PBP Setting,
Color Temp., Volume, sRGB Mode, Rec. 709 Mode, DICOM Mode,
User Mode 1, User Mode 2 and set as shortcut key.
Shortcut
BrightnessShortcut 1
Shortcut 2
Standard Mode DisplayPort 3840x2160@60Hz
ASUS PA279CV
3-13
ASUS LCD Monitor PA279 Series
3.2 Specications
Model PA279CV
Panel Size 27”W (68.47cm)
Max. Resolution 3840x2160@60Hz
Brightness (Typ.) 350cd/m
2
Intrinsic Contrast Ratio (Typ.) 1000:1
Viewing Angle (CR=10) 178°(V) /178°(H)
Display Colors 1.07 B
Color Saturation 100% sRGB
Response Time 5ms (Gray to Gray)
Satellite Speaker 2W x 2 stereo
Earphone Output
Yes
Sound from HDMI Yes
HDMI input Yes
DisplayPort input Yes
USB Port Upstream x1, Downstream x 4
Power ON Consumption(Max.) < 32 W* Based on Energy Star 8.0 standard
Chassis Colors Black
Power saving mode < 0.5W
Power off mode < 0.5W
Tilt -5° ~ +35°
Phys. Dimension (WxHxD) 614 x 523.5 x 227.82 mm(highest)
614 x 373.5 x 227.82 mm(lowest)
Phys. Dimension without stand
(WxHxD) (For VESA Wall Mount) 614 x 369.9 x 59.5 mm
Box Dimension (WxHxD) 680 x 161 x 516 mm
Net Weight (Esti.) 8.6 kg(Net); 5.7 kg(without stand)
Gross Weight (Esti.) 11.2 kg
Voltage Rating AC 100~240V(Built-in)
Operational temperature 0~40°
3-14 Chapter 3: General Instruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
• Make sure Input Select setting is a valid
signal.
• Enable Auto Source Detection to detect all input
port.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low • Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
3-15
ASUS LCD Monitor PA279 Series
3.4 Supported Timing List
PC Timings List of HDMI / DP input
Timing List DisplayPort HDMI1 HDMI2
640 x 480 @ 60Hz V V V
800 x 600 @ 56Hz V V V
800 x 600 @ 60Hz V V V
1024 x 768 @ 60Hz V V V
1280 x 720 @ 60Hz V V V
1280 x 960 @ 60Hz V V V
1280 x 1024 @ 60Hz V V V
1440 x 900 @ 60Hz V V V
1680 x 1050 @ 60Hz V V V
1920 x 1080 @ 60Hz V V V
1920 x 2160 @ 60Hz V V V
2560 x 1440 @ 60Hz V V V
3840 x 2160 @ 30Hz V V V
3840 x 2160 @ 60Hz V (Default) V (Default) V (Default)
Video timing
Timing List DisplayPort HDMI1 HDMI2
640x480P @ 59.94/60Hz V V V
720x480P @ 59.94/60Hz V V V
720x576P @ 50Hz V V V
1280x720P @ 50Hz V V
V
1280x720P @ 59.94/60Hz V V V
1440x480P @ 59.94/60Hz V V V
1440x576P @ 50Hz V V V
1920x1080P @ 50Hz V V V
1920x1080P @ 59.94/60Hz V V V
3840x2160 @ 24Hz V V
3840x2160 @ 25Hz V V
3840x2160 @ 30Hz V V
3840x2160 @ 50Hz V V V
3840x2160 @ 60Hz V V V
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.