Table of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline Dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
ASUS PB247Q User Manual
Displayed below is the user manual for PB247Q by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
PB247 Series
LCD Monitor
User Guide
ii
First Edition
April 2018
Copyright © 2018 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 Other Function(s) ............................................................ 1-4
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this
product meets the Energy Star® guidelines for energy efciency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouiller du Canada.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent re or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in re
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
Congratulations!
This product is TCO Certified for Sustainable IT
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers)
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
For more information, please visit
www.tcodevelopment.com
1-1ASUS PB247 Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power cord
HDMI cable (optional)
USB cable
DisplayPort cable (Mini-DP to DP)
DisplayPort cable (optional)
Color Calibration Testing Report
Input/Output port cover
VESA mounting kit
Cable tie
If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
Menu
Close
Input Select
Brightness
2
4
5
3
1
1. Menu (5-way) button:
• Press this button to enter the OSD menu.
• Enacts the selected OSD menu items.
• Increases/Decreases values or moves your selection up/down/left/right.
2. Close button:
• Exits the OSD menu.
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
3. Input select button:
• Selects an available input source.
Press button (Input Select button) to display HDMI-1, HDMI-2, mini
DisplayPort, or DisplayPort signals after you connect HDMI/DisplayPort cable
with the monitor.
4. Shortcut:
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut menu.
5. Power button/power indicator
• Turns the monitor on/off.
1-3ASUS PB247 Series LCD Monitor
• The color denition of the power indicator is as the below table.
White On
Amber Standby mode
Off Off
1234576 9
8
10
11
.
. Press the switch to turn on/off power.
. This port connects the power cord.
. These ports are for connection with an HDMI compatible device.
HDMI-1 and HDMI-2 ports support HDMI 1.4.
. This port is for connection with a mini DisplayPort
compatible device.
. This port is for connection with a DisplayPort compatible
device.
The default setting of DisplayPort Stream in the OSD menu is DisplayPort
1.2. You can change it to DisplayPort 1.1 when your device output signal is
DisplayPort 1.1.
. This port allows you to connect multiple
DisplayPort compatible monitors.
. This port is for service only.
. This port is for connection with a USB cable. The connection
enables the USB ports on the monitor.
These ports are USB downstream ports for connection with
USB devices, such as USB keyboard/mouse, USB ash drive, etc.
This monitor is Super-Speed USB 3.0 compatible (5Gbps). Port with
icon is BC1.2 compliant.
.
1-4 Chapter 1: Product introduction
1. Daisy chaining
The monitor supports daisy chain on DisplayPort. Daisy Chaining allows up to 4
monitors to be connected in series with the video signal being passed from the
source to a monitor. In order to enable daisy chaining, please make sure the
source transported.
• This function is only available when DisplayPort Stream in the OSD menu
is DisplayPort 1.2. If you set DisplayPort Stream to DisplayPort 1.1, all the
connected monitor will display the same content at the same time (clone).
• Mini DisplayPort does not support daisy chaining.
2-1ASUS PB247 Series LCD Monitor
2.1 Attaching the arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Attach the base into the arm, making sure the tab on the arm ts into the
groove on the base.
3. Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2 Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the input/output port cover (Figure 1).
3. Press the release button, and then detach the arm/base from the monitor
(Figure 2).
2
1
(Figure 1) (Figure 2)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2-2 Chapter 2: Setup
After the arm/base is removed, use the supplied VESA mounting kit to complete
wall mount preparation.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 12 mm).
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +35˚ to -5˚, and it allows 90˚ swivel
adjustment from either left or right. You can also adjust the monitor’s height
within +/- 130 mm.
-5°~+35°
130mm
90° 0°
90°
(Tilt) (Swivel) (Height adjustment)
2-3ASUS PB247 Series LCD Monitor
1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor to the angle you need.
-5°~+35°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
4. The OSD menu item will automatically rotate when the monitor rotates.
Menu
Close
Input Select
Brightness
Menu
Close
Input Select
Brightness
2-4 Chapter 2: Setup
2.4 Connecting the cables
1. Connect the cables as the following instructions:
For service only
: Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
:
a. Plug one end of the HDMI/DisplayPort cable to the monitor’s HDMI/
DisplayPort jack.
b. Connect the other end of the HDMI/DisplayPort cable to your device's
HDMI/DisplayPort jack.
connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort signal is fed.
:
»Upstream: Take the supplied USB 3.0 cable, and plug the smaller end
(type B) of the USB cable to the monitor’s USB upstream port, and the
larger end (type A) to your computer’s USB 3.0 port. Make sure your
computer is installed with the latest Windows 7/Windows 8.1/Windows
10 operating system. That will enable the USB ports on the monitor to
work.
»Downstream: Plug the USB Type A cable of your device to the monitor's
USB Type A jack.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2. Attach the input/output port cover if needed.
2-5ASUS PB247 Series LCD Monitor
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2-6 Chapter 2: Setup
3-1ASUS PB247 Series LCD Monitor
3.1 OSD (On-Screen Display) menu
Standard Mode
sRGB Mode
Rec. 709 mode
Scenery Mode
Reading Mode
Darkroom Mode
User Mode 1
User Mode 2
Splendid ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
1. Press the Menu (5-way) button to activate the OSD menu.
2. Move the Menu (5-way) button up/down/left/right to navigate through
the functions. Highlight the desired function and press the Menu (5-way)
button to activate it. If the function selected has a sub-menu, move the
Menu (5-way) button up/down to navigate through the sub-menu functions.
Highlight the desired sub-menu function and press the Menu (5-way)
button or move the Menu (5-way) button to activate it.
3. Move the Menu (5-way) button up/down to change the settings of the
selected function.
4. To exit and save the OSD menu, press the button or move the Menu
(5-way) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
This function contains 8 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
Standard Mode
sRGB Mode
Rec. 709 mode
Scenery Mode
Reading Mode
Darkroom Mode
User Mode 1
User Mode 2
Splendid ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
3-2 Chapter 3: OSD (On-Screen Display) menu
• StandardMode: Best choice for document editing with SplendidPlus
Video Enhancement.
• sRGBMode: Compatible with sRGB color space, sRGB mode is the best
choice for document editing.
• Rec.709Mode: Compatible with Rec. 709 color space.
• SceneryMode:Best choice for scenery photo display with SplendidPlus
Video Enhancement.
• ReadingMode: This is the best choice for book reading.
• DarkroomMode: This is the best choice for a weak ambient light
environment.
• UserMode1/UserMode2: Allows you to make color adjustments in the
Advanced Setting.
Function Standard
Mode
sRGB
Mode
Rec.
709
Mode
Scenery
Mode
Reading
Mode
Darkroom
Mode
User Mode 1/
User Mode 2
Color Engine Off Off Off On Off Off Off
Color Temp. 6500K Fixed
6500K
Fixed
6500K 6500K Fixed 6500K 6500K
Brightness 50 Fixed
50 50 100 17 11 50
Contrast 80 Fixed
80 80 80 Fixed
80 80 80
ASCR Fixed
Off
Fixed
Off
Fixed
Off Off Fixed
Off Off Off
Sharpness Fixed
40
Fixed
40
Middle
(50) High (60) Middle
(50) High (60) Middle (50)
Saturation Fixed
50
Fixed
50
Middle
(50)
Middle
(50)
Fixed
50 Middle (50) Middle (50)
Hue Fixed
50
Fixed
50
Middle
(50)
Middle
(50)
Fixed
50 Middle (50) Middle (50)
Advanced
Setting Disable Disable Enable Enable Disable Enable Enable
Gamma 2.2 Fixed
2.2 2.2 Fixed
2.2 2.2 2.2 2.2
Uniformity
Compensation Off Off Off Fixed
Off
Fixed
Off
Fixed
Off Off
ViviPixel 0 0 0 0 0 0 0
3-3ASUS PB247 Series LCD Monitor
In this function, you can adjust the blue light filter level.
Level 0
Level 1
Level 2
Level 3
Level 4
Blue Light Filter ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
No change.
The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Standard Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable. Enabling this function automatically turns off ECO Mode.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
3-4 Chapter 3: OSD (On-Screen Display) menu
Set a desired color setting from this menu.
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
Advanced Setting
Color Reset
Color ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
: The adjusting range is from 0 to 100.
: The adjusting range is from 0 to 100.
: The adjusting range is from 0 to 100.
: Shifts the image color between green and purple.
: Contains 4 modes including 9300K, 6500K, 5500K and
5000K.
: Allows you to set the color mode to 2.4, 2.2, 2.0 or 1.8.
:
* Six-axis Hue adjustment.
* Six-axis Saturation adjustment.
* Adjusts the gain levels for R, G, B.
* Adjusts the black level offset values for R, G, B.
:
* Current Splendid color mode reset:
Resets the color settings of current color mode to the factory
default value.
* All Splendid color mode reset:
Resets the color settings of all color modes to the factory default
value.
3-5ASUS PB247 Series LCD Monitor
Set the image related setting from this menu.
Sharpness
Trace Free
Aspect Control
Uniformity Compensation
VividPixel
ASCR
Image ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
: The adjusting range is from 0 to 100.
: Adjusts the response time of the monitor.
: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
: Adjusts different areas of the screen to
reduce any screen uniformy errors, providing consistent brightness and
color across the entire screen.
: Enhances the outline of the displayed picture and generates
high-quality images on screen.
: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
You can adjust Volume, Mute and Source from this menu.
Volume
Mute
Sound ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
: the adjusting range is from 0 to 100.
: toggles the monitor sound between on and off.
3-6 Chapter 3: OSD (On-Screen Display) menu
6. InputSelect
In this function, you can select your desired input source.
HDMI-1
HDMI-2
DisplayPort
Mini Display Port
Input Select ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
7. SystemSetup
Allows you to adjust the system.
Splendid Demo Mode
ECO Mode
QuickFit
USB Charging
Language
More
System Setup ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
• SplendidDemoMode: Splits the screen into two for Splendid modes
comparison. (Scenery mode only)
• ECOMode: reduces power consumption. Turning on this function
automatically disables Blue Light Filter.
Brightness and contrast cannot be adjusted when ECO Mode is ON. Color
accuracy will be affected as well.
• QuickFit: Allows users to have a preview of the document or photo layout
directly on screen without printing test copies.
3-7ASUS PB247 Series LCD Monitor
* Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid
* Paper size: Provides users to view their documents in real size on
the screen.
B5
* Customization: You can decide the frame size by moving the
Menu (5-way) button up/down/left/right. You can press the Menu
(5-way) button for longer than 3 seconds to switch the measurements
between millimeter and inch.
H16
V15
* Ruler: This pattern presents physical ruler on top and left side. You
can press the Menu (5-way) button for longer than 3 seconds to
switch the measurements between metric and imperial.
5
5
10
10
15
15 20 25 30
3-8 Chapter 3: OSD (On-Screen Display) menu
:
* “On During Standby” allows the USB downstream ports to charge
external devices when the monitor is turned on or in standby
mode.
* “Off During Standby“ allows the USB downstream ports to charge
external devices only when the monitor is turned on.
:
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
* Adjusts the OSD rotation.
: There are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplied Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian.
: Compatibility with graphic card. Select DisplayPort
1.1 or DisplayPort 1.2 by graphic card DP version.
: To disable all function keys. Press the second button from the
top over five seconds to cancel the key lock function.
: Turns the power LED indicator on/off.
: Shows the monitor information.
: “Yes” allows you to restore the default settings.
Defines the functions for Shortcut button.
Shortcut
Shortcut ASUS PB247
StandardMode DisplayPort 1920 x 1080@ 60Hz
: selects a function for Shortcut button.
When a certain function is selected or activated, your shortcut key may
not support. Available function choices for shortcut: Blue Light Filter,
Brightness, Contrast, Color Temp., QuickFit, User Mode 1, User Mode 2.
3-9ASUS PB247 Series LCD Monitor
3.2 Specicationssummary
Panel Type TFT LCD
Panel size 23.8" (16:9, 60.47 cm) wide screen
Max. Resolution 1920 x 1080
Pixel pitch 0.2745 mm
Brightness (Typ.) 250 cd/m2
Contrast Ratio (Typ.) 1000:1
Contrast Ratio (Max.) 100,000,000:1 (with ASCR on)
Viewing angle (H/V) CR>10 178˚/178˚
Display colors 16.7 million (8 bits)
Color gamut sRGB 100%
Response time 5 ms (Gray to gray)
SplendidPlus Video Enhancement
Yes
SplendidPlus selection 8 video preset modes
Color temperature selection 4 color temperatures
Digital input
HDMI v1.4, DisplayPort v1.2, mini DisplayPort
Digital output
DisplayPort
Earphone jack Yes
Speaker (Built-in) 2 W x 2 Stereo, RMS
USB 3.0 port Upstream x 1, Downstream x 3
Colors Gray & Black
Power LED White (On)/Amber (Standby)
Tilt +35˚~ -5˚
Swivel +90˚~ -90˚
Pivot +90˚; -90˚
Height Adjustment 130 mm
Kensington lock Yes
AC input voltage AC: 100~240V
Power consumption Power On: < 25 W** (Typ.), Standby: < 0.5 W (Typ.),
Power Off: 0 W (Switch off)
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimension (W x H x D) 539.5 mm x 479.68 mm x 211.34 mm (with stand, highest)
539.5 mm x 349.68 mm x 211.34 mm (with stand, lowest)
539.5 mm x 311.61 mm x 54.33 mm (without stand)
665 mm x 188 mm x 447 mm (package)
Weight (Esti.) 5.7 kg (Net); 3.4 kg (without stand); 7.7 kg (Gross)
Multi-languages 21 languages (English, French, German, Italian, Spanish,
Dutch, Portuguese, Russian, Czech, Croatian, Polish,
Romanian, Hungarian, Turkish, Simplied Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian,
Persian)
3-10 Chapter 3: OSD (On-Screen Display) menu
HDMI cable (optional), DisplayPort cable (Mini-DP to
DP), DisplayPort cable (optional), Power cord, USB
cable, Quick start guide, Warranty card, Color Calibration
Testing Report, Input/Output port cover, VESA mounting
kit, cable tie
UL/cUL, FCC, ICES-3, EPEAT Silver, CB, CE, ErP, WEEE,
ISO 9241-307, UkrSEPRO, CU, CCC, CEL, BSMI, RCM,
MEPS, VCCI, PSE, J-MOSS, KC, KCC, e-Standby, Energy
Star, TCO 7.0, RoHs, Windows 7, 8.1 and 10 WHQL, TUV
Flicker free, TUV Low Blue Light, Mac Compliance
3-11ASUS PB247 Series LCD Monitor
3.3 Outline Dimensions
3-12 Chapter 3: OSD (On-Screen Display) menu
3.4 Troubleshooting (FAQ)
Power LED is not ON • Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
The power LED lights amber and there is
no screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
No sound or sound is low • Ensure that the HDMI/DisplayPort cable is
properly connected to the monitor and the
computer.
• Adjust the volume settings of both your
monitor and HDMI/DisplayPort device.
• Ensure that the computer sound card
driver is properly installed and activated.
3-13ASUS PB247 Series LCD Monitor
3.5 Supported operating modes
640x480 31.47(N) 59.94(N) 25.18
640x480 35.00(N) 66.66(N) 30.24
640x480 37.87(N) 72.82(N) 31.5
640x480 37.5(N) 75.00(N) 31.5
720x400 31.47(N) 70.08(P) 28.32
800x600 35.16(P) 56.25(P) 36.00
800x600 37.88(P) 60.32(P) 40.00
800x600 48.08(P) 72.12(P) 50.00
800x600 46.86(P) 75.00(P) 49.50
832X624 49.72(P/N) 74.55(P/N) 57.28
1024x768 48.36(N) 60.00(N) 65.00
1024x768 56.476(N) 70.069(N) 75.00
1024x768 60.02(N) 75.00(N) 78.75
1152x864 67.5(P/N) 75.00(P/N) 108
1280x720 45.00(P) 60.00(N) 75.25
1280x768 47.78(P) 60.00(N) 79.5
1280x800 49.7(P) 60.00(N) 83.5
1280x960 60.00(P) 60.00(N) 108
1280x1024 63.98(P) 60.02(N) 108
1280x1024 79.98(P) 75.02(N) 135
1360x768 47.712(P) 59.79(P) 85.5
1366x768 47.712(P) 59.79(P) 85.5
1440x900 55.94(N) 59.89(P) 106.5
1680x1050 65.29(P) 60.00(P) 146.25
1920x1080 67.5(P) 60.00(P) 148.5
3-14 Chapter 3: OSD (On-Screen Display) menu
480p 720 x 480 31.469 60 27 480p-60Hz
720p60 1280 x 720 45 60 74.25 720p-60Hz
576p 720 x 576 31.25 50 27 576p-50Hz
720p50 1280 x 720 37.5 50 74.25 720p-50Hz
1080p60 1920 x 1080 67.5 60 148.5 1080p-60Hz
1080p50 1920 x 1080 56.25 50 148.5 1080p-50Hz