Table of Contents
ASUS PG27VQ User Manual
Displayed below is the user manual for PG27VQ by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ii
First Edition
August 2017
Copyright © 2017 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
iii
Contents
Notices ......................................................................................................... iv
Safety information ....................................................................................... v
Care & Cleaning .......................................................................................... vi
Takeback Services ..................................................................................... vii
Chapter 1: Product introduction
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-2
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 GamePlus Function ........................................................ 1-4
1.3.4 GameVisual Function ...................................................... 1-5
Chapter 2: Setup
2.1 Assembling the monitor arm/base ............................................. 2-1
2.2 Cable management ..................................................................... 2-2
2.3 Adjusting the monitor .................................................................. 2-3
2.4 Detaching the arm (for VESA wall mount) ................................. 2-4
2.5 Connecting the cables ................................................................. 2-5
2.6 Turning on the monitor ................................................................ 2-5
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
3.2 Aura ............................................................................................... 3-6
3.3 Specicationssummary .............................................................. 3-7
3.4 Troubleshooting (FAQ) ................................................................ 3-8
3.5 Supported operating mode ......................................................... 3-9
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethat
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhichthe
receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Beforesettingupthemonitor,carefullyreadallthedocumentationthatcame
with the package.
• Topreventfireorshockhazard,neverexposethemonitortorainormoisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethe
monitor may result in serious physical injury.
• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualified
service technician or your retailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthe
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresultinfire
or electric shock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorin
any area where it may become wet. Place the monitor on a stable surface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiod
of time. This will protect the monitor from damage due to power surges.
• Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitor
cabinet.
• Toensuresatisfactoryoperation,usethemonitoronlywithULlistedcomputers
which have appropriate configured receptacles marked between 100-240V AC.
• Ifyouencountertechnicalproblemswiththemonitor,contactaqualifiedservice
technician or your retailer.
• Adjustmentofthevolumecontrolaswellastheequalizertoothersettings
thanthecenterpositionmayincreasetheear-/headphonesoutputvoltageand
therefore the sound pressure level.
• Theadapterisonlyusedforthismonitor,donotuseitforotherpurpose.
Your device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP-90YD B
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
AEEEyönetmeliğineuygundur
Care & Cleaning
• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoidusinga cleaner containing alcohol oracetone. Useacleanerintended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
• Youmayfind slightlyunevenbrightness onthescreendependingon the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Wheretondmoreinformation
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardwareandsoftwareproducts.Refertohttp://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1-1ASUS PG27V Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Driver and Manual disc
Quick start guide
Warranty card
Power adapter
Power cord
DP cable
HDMI cable
USB cable
LED projection cover and changeable films
Input/Outputportcover
If any of the above items is damaged or missing, contact your retailer
immediately.
Select“Level1/Level2/Level3”whenyouseethemessage“LIGHTIN
MOTIONON/OFF”appearsifyouwanttoturnontheredlightonthebase.
Select “Level 0” if you want it to turn off. If you disable this function but later
wish to reactivate it, please use the OSD menu to turn it on.
If no signal is detected for around 12 minutes, the monitor automatically enters
saving mode.
It is recommended that you set the DisplayPort Deep Sleep and HDMI Deep
Sleep functions to “OFF”.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
5
1
2
3
4
5
1. ( 5-way) button:
Turns on the OSD menu. Enacts the selected OSD menu item.•
Increases/Decreasesvaluesormovesyourselectionup/down/left/right.•
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
2. button
Exits the OSD menu item.•
Toggles the Key Lock function between on and off with a long press for 5 •
seconds.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
3. button:
GamePlus hotkey. Move the • ( )buttonup/downtoselectand
press ( ) to confirm the function needed.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
4. button
GameVisual hotkey. This function contains 6 sub-functions you can select •
for your preference.
Turns on the OSD menu when the monitor enters standby mode or •
displays the “NO SIGNAL“ message.
1-3ASUS PG27V Series LCD Monitor
Powerbutton/powerindicator5.
Turnsthemonitoron/off.•
The color definition of the power indicator is as the below table.•
Status Description
White ON
Amber flashing Entering standby mode
Amber Standbymode/Nosignal
OFF OFF
Red G-SYNC
Green 3D
Yellow ULMB
1.3.2 Back view
9
4 5 76
8
DisplayPort.1. This port is for connection for a DisplayPort compatible device.
HDMI port.2. This port is for connection with an HDMI compatible device.
USB 3.0 upstream port3. . This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
USB 3.0 downstream ports4. . These ports are for connection with USB
devices,suchasUSBkeyboard/mouse,USBflashdrive,etc.
For service personnel only.5.
DC IN port.6. This port connects the power cord.
Earphone jack.7. ThisportisonlyavailablewhenanHDMI/DisplayPortcable
is connected.
Control buttons.8.
Kensington lock slot9. .
1-4 Chapter 1: Product introduction
1.3.3 GamePlus Function
The GamePlus function provides a toolkit and creates a better gaming environment
for users when playing different types of games. The crosshair overlay with four
different crosshair options lets you choose the one that best suits the game you're
playing. There's also an onscreen timer you can position on the left of the display
so you can keep track of the elapsed gaming time; while the FPS (frames per
second) counter lets you know how smooth the game is running. Display Alignment
displays alignment lines on 4 sides of the screen, serving as an easy and handy
tool for you to line up multiple monitors perfectly.
To activate GamePlus:
Press the GamePlus hotkey.1.
Move the 2. ( )buttonup/downtoselectamongdifferentfunctions.
Press the 3. ( ) button or move the ( ) button right to confirm the
function you choose, and move the ( )buttonup/downtonavigate
through the settings. Move the ( ) button left to go back, off, and exit.
Highlight the desired setting and press the 4. ( ) button to activate it.
Press the button to inactivate it.
GamePlus Main Menu GamePlus — Crosshair GamePlus — Timer
NEXT BACK/EXIT
GamePlus
Crosshair
FPS Counter
FPS
Display Alignment
Timer
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus
1-5ASUS PG27V Series LCD Monitor
1.3.4 GameVisual Function
The GameVisual function helps you select among different picture modes in a
convenient way.
To activate GameVisual:
Press the 1. GameVisual hotkey.
Move the 2. ( )buttonup/downtoselectamongdifferentfunctions.
Press the 3. ( ) button to confirm the function you choose, and move the
( ) button left to go back, off, and exit.
Scenery Mode• : This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
Racing Mode• : This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
Cinema Mode• : This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
RTS/RPG Mode• :ThisisthebestchoiceforReal-TimeStrategy(RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
FPS Mode• : This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
sRGB Mode• : This is the best choice for viewing photos and graphics
from PCs.
• In the Racing mode, the following function(s) are not user-configurable:
Saturation.
In the sRGB mode, the following function(s) are not user-configurable: •
Saturation, Color Temp., Brightness, Contrast, Gamma.
In the Scenery and Cinema modes, the following function(s) • are not user-
configurable: Gamma, Dark Boost.
1-6 Chapter 1: Product introduction
2-1ASUS PG27V Series LCD Monitor
2.1 Assembling the monitor arm/base
Insert the base into the arm.1.
Fix the base to the arm by fastening the bundled screw.2.
Attach the LED projection cover to the stand.3.
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
To change the film on the LED projection cover, follow the illustration below.
12
2-2 Chapter 2: Setup
2.2 Cable management
Youcanorganizethecableswiththehelpoftheinput/outputportcover.
Arranging the cables•
Using the input/output port cover: • the cover can be attached or detached.
2-3ASUS PG27V Series LCD Monitor
2.3 Adjusting the monitor
For optimal viewing, we recommend that you look at the full face of the •
monitor, then adjust the monitor to the angle that is most comfortable for you.
Hold the stand to prevent the monitor from falling when you change its angle.•
Therecommendedadjustingangleis+20˚ to-5˚(fortilt)/+40˚to-40˚(for•
swiveling)/+100 mm (for height adjustment).
100mm
40° 0°
40°
-5° ~ +20°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2-4 Chapter 2: Setup
2.4 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
Have the front of the monitor face down on a table.1.
Remove the covers on where the monitor and the arm meet.2.
Loosenthefourscrewsonthebackofthemonitorandremovethearm/base.3.
1 2 3 4
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
UseonlytheULListedWall MountBracketwithminimumweight/load•
22.7kg (Screw size: M4 x 10 mm)
2-5ASUS PG27V Series LCD Monitor
2.5 Connecting the cables
Connect the cables as the following instructions:
To connect the power cord: •
Connect the power adapter securely to the monitor’s DC IN input.a.
Connect one end of the power cord to the power adapter and the other b.
end to a power outlet.
To connect the DisplayPort/HDMI cable: •
PlugoneendoftheDisplayPort/HDMIcabletothemonitor’sDisplayPort/a.
HDMI port.
ConnecttheotherendoftheDisplayPort/HDMIcabletoyourcomputer'sb.
DisplayPort/HDMIport.
To use the earphone: • connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
To use the USB 3.0 ports:• Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
MakesureyourcomputerisinstalledwiththelastestWindows7/Windows8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
2.6 Turning on the monitor
Press the power button. See page 1-3 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2-6 Chapter 2: Setup
3-1ASUS PG27V Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
MOVE/ENTER BACK EXIT
Max Refresh Rate 165 Hz
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Press the 1. ( ) button to activate the OSD menu.
Move the 2. ( )buttonup/downtonavigatethroughthefunctions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( )buttonup/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
Move the 3. ( )buttonup/downtochangethesettingsoftheselected
function.
To exit and save the OSD menu, press the 4. button or move the
( ) button left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
3.1.2 OSD function introduction
Over Clocking1.
This function allows you to adjust the refresh rate.
MOVE/ENTER BACK EXIT
Max Refresh Rate 165 Hz
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
3-2 Chapter 3: General Instructions
Max Refresh Rate 165 Hz• : allows you to select a maximum refresh rate
of 165Hz (Only for DisplayPort input). After selecting, press the ( )
button twice to activate the setting.
After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA Control
Panel. If you don’t see an image, disconnect the DP cable and use the monitor
OSD to try again with a safer Max Refresh Rate.
Blue Light Filter2.
In this function, you can adjust the blue light filter level.
MOVE/ENTER BACK EXIT
Level 0
Level 1
Level 2
Level 3
Level 4
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Level 0: • No change.
Level 1~4:• The higher the level, the less blue light is scattered. When
Blue Light Filter is activated,the default settings of Racing Mode will
be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
Users should take some time away from the display if working for long •
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
To minimize eye strain and dryness in your eyes, users should rest the eye •
periodically by focusing on objects that are far away.
Eye exercises can help to reduces eye strain. Repeat these exercises •
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
High energy blue light may lead to eye strain and AMD (Age-Related •
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
3-3ASUS PG27V Series LCD Monitor
Color3.
You can set the color related setting from this menu.
MOVE/ENTER BACK EXIT
Brightness
Contrast
Saturation
Color Temp.
Gamma
80
50
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Brightness• : The adjusting range is from 0 to 100.
When NVIDIA 3D vision is enabled, Brightness will be changed
to NVIDIA® LightBoost™. You can enjoy twice the brightness of
conventional 3D technology in 3D mode with zero increase in total energy
consumption*
*Compatible with the NVIDIA 3D Vision® 2 kit. To activate NVIDIA 3D function,
turn off Gsync first and make sure that the input source is DisplayPort.
Contrast• : The adjusting range is from 0 to 100.
Saturation• : The adjusting range is from 0 to 100.
Color Temp.• : Contains 4 modes including Cool, Normal, Warm, and User
Mode.
Gamma• :Allowsyoutosetthecolormodeto1.8,2.2or2.4.
Image 4.
You can set the image related setting from this menu.
MOVE/ENTER BACK EXIT
OD
Adaptive Contrast Control
Dark Boost
ULMB
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
OD• : Improves the gray level response time of the LCD panel. It contains 3
modes including Extreme, Normal and Off.
3-4 Chapter 3: General Instructions
Adaptive Contrast Control• : Dynamically adjusts the monitor’s contrast
level to reveal details in every part of an image especially when an
image’s contrast is low. The strength level of the adaptive contrast control
is adjustable to Enable, Strength or Limit.
Dark Boost• : Dark color enhancement adjusts monitor’s gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier to see.
ULMB (• Ultra Low Motion Blur) (only for DisplayPort input): Adjusts the
level of motion blur reduction. This function is available when the refresh
rateis80Hz,100Hzor120Hz.
Input Select 5.
In this function, you can select your desired input source.
MOVE/ENTER BACK EXIT
DisplayPort
HDMI
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
System Setup6.
Allows you to adjust the system.
MOVE/ENTER BACK EXIT
Language
LIGHT IN MOTION
Aura Sync
Aura RGB
OSD Position
Transparency
OK
Normal Mode DisplayPort 2560x1440@60Hz
Racing Mode Aura Rainbow
ROG Swift PG27V
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Language• : There are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.
LIGHT IN MOTION• : Selects the brightness level of the light on the stand.
The adjusting range is from Level 0 to 3.
3-5ASUS PG27V Series LCD Monitor
Aura Sync• : Allows you to turn on or off the Aura Sync function that
synchronizes the Aura RGB light effect among all supported devices.
Aura RGB• : In this function you can select an Aura RGB light effect for the
monitor and change settings for the light effect. Select “OFF” if you want
to turn the Aura RGB light effect off.
• If the Aura Sync function is turned ON, the Aura RGB function will become
unavailable.
See page 3-6 for information on how to customize Aura light effects from •
your computer.
OSD Position• :Adjuststhehorizontalposition(H-Position)/thevertical
position (V-Position) of the OSD.
Transparency• : Adjusts the OSD background from opaque to transparent.
OSD Timeout• : Adjusts the OSD timeout from 10 to 120 seconds.
Key Lock• : To disable all function keys. Press over 5 seconds to cancel
the key lock function.
Information• : Shows the monitor information.
Sound• :
Volume* : The adjusting range is from 0 to 100.
Mute* : Toggles the monitor sound between on and off.
All Reset• : “Yes” allows you to restore the default settings.
DisplayPort Deep Sleep• : Puts the DisplayPort port into deep sleep.
HDMI Deep Sleep• : Puts the HDMI port into deep sleep.
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button (except the power button) on the monitor to wake it up.
- Disable the Deep Sleep function. (Recommended)
3-6 Chapter 3: General Instructions
3.2 Aura
AURA is a software program that controls the colorful LEDs on supported devices,
such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura allows
you to adjust the color of the RGB LEDs on these devices and select different light
effects. You can also correct or adjust the color of the LEDs by calibrating them.
To activate Aura:
Turn ON the 1. Aura Sync function in the OSD menu.
Connect the USB 3.0 upstream port of the monitor to the USB port of your 2.
computer.
Install AURA and then restart the computer.3.
Double-click the AURA program icon 4. on your desktop.
Refer to the figure below for information about the AURA program functions.
Adjust AURA lighting options
Select the desired AURA lighting
effect when the system has been
turned on
Click to enable the
default settings
Click to undo the changes
Click to apply the
changes
If the USB upstream connection between the monitor and computer is
disconnected, to resume the Aura function, you need to re-connect the USB 3.0
upstream port of the monitor to the computer and then restart the computer.
3-7ASUS PG27V Series LCD Monitor
3.3 Specicationssummary
Panel Type TFT LCD
Panel size 27”W(16:9,68.5cm)widescreen
Max. Resolution 2560 x 1440
Pixel pitch 0.233 mm
Brightness (Typ.) 400cd/m2
Contrast Ratio (Typ.) 1000:1
Viewing angle(H/V) CR>10 170˚/160˚
Display colors 16.7 M
Response time 1 ms (Gray to Gray)
Color temperature selection 4 color temperatures
Analog input No
Digital input DisplayPort v1.2 x 1, HDMI v1.4 x 1
Earphone jack Yes
Audio input No
Speaker (Built-in) No
USB 3.0 port Upstream x 1, Downstream x 2
Colors Blue
Power LED White(On)/Amber(Standby)/Green(3D)/Yellow
(ULMB)/Red(GSync)
Tilt +20˚~-5˚
Swivel +40˚~-40˚
Height adjustment 100 mm
VESA wall mount 100 x 100 mm
Kensington lock Yes
Voltage rating AC:100~240V
DC: 19V, 4.74A (AC adapter)
Power consumption Power On: < 90 W, Standby: < 0.5 W,
Power Off: < 0.5 W
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimensions (W x H x D) 614.5mmx522.2mmx268.7mm(Highest)
614.5mmx422.2mmx268.7mm(Lowest)
695 mm x 247 mm x 530 mm (package)
Weight (Esti.) 8.46kg(Net);10.6kg(Gross)
Multi-languages 21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatian, Polish, Romanian, Hungarian,
Turkish, Simplified Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesia, Persian)
3-8 Chapter 3: General Instructions
Accessories DP cable, HDMI cable, USB cable, power
adapter, power cord, Driver and Manual disc,
Quick start guide, warranty card, LED projection
coverandchangeablefilms,Input/Outputport
cover
Compliance and Standards CB,CE,CU,CCC,UL/cUL,FCC,RCM,BSMI,
VCCI, RoHS, WEEE, J-MOSS, ErP, PSE,
CELLevel1,Windows7WHQL,Windows8.1
WHQL, Windows 10 WHQL, KCC, E-Standby,
TUV-Flicker Free, TUV-Low Blue Light
*Specifications are subject to change without notice.
3.4 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON Press the power button to check if the •
monitor is in the ON mode.
Check if the power cord is properly •
connected to the monitor and the power
outlet.
The power LED lights white and there is no
screen image
Check if the monitor and the computer are •
in the ON mode.
Make sure the signal cable is properly •
connected the monitor and the computer.
Inspect the signal cable and make sure •
none of the pins are bent.
Connect the computer with another •
available monitor to check if the computer
is properly working.
Screen image is too light or dark Adjust the Contrast and Brightness •
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
Make sure the signal cable is properly •
connected to the monitor and the
computer.
Move electrical devices that may cause •
electrical interference.
Screen image has color defects (white does
not look white)
Inspect the signal cable and make sure •
that none of the pins are bent.
Perform All Reset via OSD.•
AdjusttheR/G/Bcolorsettingsorselect•
the Color Temperature via OSD.
3-9ASUS PG27V Series LCD Monitor
3.5 Supported operating mode
HDMI input
Resolution Frequency Refresh Rate
640x480 60Hz
720x480 60Hz
720 x 576 50Hz
800x600 60Hz
1024x768 60Hz
1280x720 50Hz
1280x720 60Hz
1920x1080 50Hz
1920x1080 60Hz
2560 x 1440 60Hz
Note:
Do not support interlace.
DisplayPort input
Resolution Frequency Refresh Rate
640x480 60Hz
800x600 60Hz
1024x768 60Hz
2560 x 1440 60Hz
2560 x 1440 85Hz
2560 x 1440 100Hz
2560 x 1440 120Hz
2560 x 1440 144Hz
Note:
Do not support interlace.
G-SYNC (only for DisplayPort input) supported NVIDIA GPUs: NVIDIA GeForce GTX 650Ti BOOST
GPU or higher. For other GPUs, please contact the manufactures to see if they are compatible.
3-10 Chapter 3: General Instructions
DisplayPort input--Over clocking
Resolution Frequency Refresh Rate
2560 x 1440 165Hz
Note:
Do not support interlace.
Over Clocking supported GPUs: NVIDIA Maxwell GPU Graphics Card like GTX 960, GTX970,
GTX980, GTX980 Ti and GTX Titan X or higher. For other GPUs, please contact the manufactures to
see if they are compatible.
The monitor is purposely supporting the NVIDIA G-SYNC technology and targeting NVIDIA graphics
solutions.
PleasenotethatOverClockingfunction/performancedependsontheGPUs,
contentsdisplayed,viewingdistance/angle,refreshrateandusereyes
sensitivity. ASUS only provides this function. The performance or any side effect
after activation is not guaranteed. Side effect, such as decayed contrast ratio or
waterfall is not a product defect but trade off.
System Requirements for NVIDIA 3D vision
Microsoft• ® Windows®Vista32/64-bitorWindows732/64-bitorhigher.
Intel® CoreTM2 Duo or AMD AthonTM X2 CPU or higher.•
1GB of system memory (2GB is recommended)•
100 MB free disk space.•
3-11ASUS PG27V Series LCD Monitor
