Table of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Cable management
- 2.3 Detaching the arm/base (for VESA wall mount)
- 2.4 Adjusting the monitor
- 2.5 Connecting the cables
- 2.6 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Aura
- 3.3 Specifications summary
- 3.4 Outline dimensions
- 3.5 Troubleshooting (FAQ)
- 3.6 Supported operating modes
ASUS PG32UQX User Manual
Displayed below is the user manual for PG32UQX by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ii
First Edition
February 2021
Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
iii
Contents
Contents ...................................................................................................... iii
Notices ......................................................................................................... iv
Safety information ....................................................................................... v
Care & Cleaning .......................................................................................... vi
Takeback Services ..................................................................................... vii
Product information for EU energy label ................................................. vii
Chapter 1: Product introduction
1.1 Welcome! .................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-2
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 GamePlus function .......................................................... 1-4
1.3.4 GameVisual function ....................................................... 1-5
1.3.5 Other Function(s) ............................................................ 1-6
Chapter 2: Setup
2.1 Attaching the arm/base ............................................................... 2-1
2.2 Cable management ...................................................................... 2-2
2.3 Detaching the arm/base (for VESA wall mount) ........................ 2-3
2.4 Adjusting the monitor .................................................................. 2-4
2.5 Connecting the cables ................................................................. 2-5
2.6 Turning on/off the monitor .......................................................... 2-6
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu ................................................ 3-1
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-2
3.2 Aura ............................................................................................... 3-8
3.3 Specicationssummary .............................................................. 3-9
3.4 Outline dimensions .................................................................... 3-11
3.5 Troubleshooting (FAQ) .............................................................. 3-12
3.6 Supported operating modes ..................................................... 3-13
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouiller du Canada.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent re or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in re
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate congured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualied
service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
• The adapter is only used for this monitor, do not use it for other purpose. Your
device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP280-BB B
vi
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
AEEEyönetmeliğineuygundur
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Wheretondmoreinformation
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
Product information for EU energy label
viii
1-1ASUS PG32UQX Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power adapter
Power cord
HDMI cable
DisplayPort cable
USB cable
ROG welcome card with envelope
Color calibration testing report
Input/Output port cover
Wall mount screws
Tripod screw
LED projection cover and changeable lms
ROG sticker
If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
14 3 2
56
1. Power indicator
• The color denition of the power indicator is as the below table.
Status Description
White ON
OFF OFF
Amber ashing Entering standby mode
Amber Standby mode/No signal
Green HDR/HDR+G-SYNC
Red G-SYNC
2. Shortcut(Right)
• Turns on the monitor when the monitor enters standby mode or displays
the “NO SIGNAL“ message.
• Default: GameVisual hotkey
• To change the hotkey function, go to the Shortcut > Shortcut(Right)
menu.
3. OK button:
• Turns on the monitor when the monitor enters standby mode or displays
the “NO SIGNAL“ message.
• Press this button to enter the OSD menu.
1-3ASUS PG32UQX Series LCD Monitor
• Enacts the selected OSD menu items.
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
4. Shortcut(Left)
• Turns on the monitor when the monitor enters standby mode or displays
the “NO SIGNAL“ message.
• Default: GamePlus hotkey
• To change the hotkey function, go to the Shortcut > Shortcut(Left)
menu.
5. LiveDash OLED panel
• Displays the information that you specied in the System Setup >
LiveDash menu.
6. OSD dial
• Increases/Decreases values or moves your selection up/down/left/
right.
1.3.2 Back view
5 6 7 8
9
14
12
13
12
10
9
11
9
6
1. DC-IN port. This port connects the power cord.
2. For service personnel only.
3. HDMI ports. These ports are for connection with an HDMI compatible
device.
4. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
5. USB upstream port. This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
6. USB downstream ports. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc.
1-4 Chapter 1: Product introduction
7. Earphone jack.
8. Kensington lock slot.
9. Vent (heated air exhaust).
Do not cover the ventilation slots on the monitor. Heat build-up can reduce the
service life of your monitor and also be dangerous.
10. Screw hole (for the tripod screw).
11. Light sensor.
12. AURA RGB/AURA Sync (controlled by Armoury Crate software).
13. Light In Motion.
14. Vent (air intake).
Do not cover the ventilation slots on the monitor. Heat build-up can reduce the
service life of your monitor and also be dangerous.
1.3.3 GamePlus function
The GamePlus function provides a toolkit and creates a better gaming environment
for users when playing different types of games. The crosshair overlay with 6
different crosshair options lets you choose the one that best suits the game you're
playing. There are also on screen timer and stopwatch you can position on the left
of the display so you can keep track of the gaming time; while the FPS (frames per
second) counter lets you know how smooth the game is running. Display Alignment
displays alignment lines on 4 sides of the screen, serving as an easy and handy
tool for you to line up multiple monitors perfectly.
To activate GamePlus:
1. Press the GamePlus shortcut button
2. Turn the OSD dial left/right to select among different functions.
3. Press the OK button to activate the function you choose, or display the
settings.
4. Turn the OSD dial left/right to navigate through the settings. Highlight the
desired setting and press the OK button to activate it.
5. Press the Back button to go back, or press the Exit button to
exit.
1-5ASUS PG32UQX Series LCD Monitor
GamePlus Main Menu GamePlus — Crosshair
GamePlus
Crosshair
Timer
Stopwatch
FPS Counter
Display Alignment
FPS
Crosshair
OFF
GamePlus — Timer GamPlus — FPS Counter
Timer
OFF
30:00
40:00
50:00
60:00
90:00
FPS Counter
FPS
OFF
Number
Bar Graph
001
1.3.4 GameVisual function
The GameVisual function helps you select among different picture modes in a
convenient way.
To activate GameVisual:
1. Press the GameVisual shortcut button
2. Turn the OSD dial left/right to highlight a desired setting.
3. Press the OK button to activate it
4. Press the Back button to go back, or press the Exit button to
exit.
1-6 Chapter 1: Product introduction
• Scenery Mode: This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
• Racing Mode: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
• Cinema Mode: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
• RTS/RPG Mode: This is the best choice for Real-Time Strategy (RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
• FPS Mode: This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• In the Racing mode, the following function(s) are not user-congurable:
Six-axis Saturation.
• In the sRGB mode, the following function(s) are not user-configurable:
Gamma, Six-axis Saturation.
• In the Scenery/Cinema mode, the following function(s) are not user-
congurable: Gamma, Dark Boost.
1.3.5 Other Function(s)
• HDR
The monitor supports HDR format. When detecting HDR content, an "HDR ON"
message will pop up and display in the Information page.
2-1ASUS PG32UQX Series LCD Monitor
2.1 Attaching the arm/base
To assemble the monitor base:
1. Insert the base into the arm (Figure 1).
2. Fix the base to the arm by fastening the bundled screw. (Figure 2).
3. Remove the rubber cap at the bottom of the base. (Figure 2).
4. Attach the LED projection cover to the stand. (Figure 3).
1
2
3
(Figure 1)
(Figure 2)
(Figure 3)
To change the lm on the LED projection cover, follow the illustration below.
12
2-2 Chapter 2: Setup
2.2 Cable management
You can organize the cables with the help of the input/output port cover.
• Arranging the cables
• Using the input/output port cover: the cover can be attached or detached.
2-3ASUS PG32UQX Series LCD Monitor
2.3 Detaching the arm/base (for VESA
wall mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Use a screwdriver to remove the covers on where the monitor and the arm
meet.
3. Loosen the four screws on the back of the monitor and remove the arm/
base.
4. Fasten the wall mount screws.
1 2 3 4 5
Handle with caution to avoid injury or damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm).
2-4 Chapter 2: Setup
2.4 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +20˚ to -5˚, and it allows 20˚ swivel
adjustment from either left or right. You can also adjust the monitor’s height
within +/- 70 mm.
20° 0° 20 °
70mm
- 5° ~ + 20°
(Tilt) (Swivel) (Height adjustment)
2-5ASUS PG32UQX Series LCD Monitor
2.5 Connecting the cables
Connect the cables as the following instructions:
For service only
• To connect the power cord:
a. Connect the power adapter securely to the monitor’s DC IN input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
• To connect the HDMI/DisplayPort cable:
a. Plug one end of the HDMI/DisplayPort cable to the monitor’s HDMI/
DisplayPort jack.
b. Connect the other end of the HDMI/DisplayPort cable to your device's
HDMI/DisplayPort jack.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort signal is fed.
• To use the USB 3.0 ports: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 10
operating system. That will enable the USB ports on the monitor to work.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2-6 Chapter 2: Setup
2.6 Turningon/othemonitor
• To turn on the monitor:
Press any button. See page 1-2 for the location of the buttons. The power indicator
lights up in white to show that the monitor is ON.
• To turn off the monitor:
Turn the OSD dial right to highlight and press the OK button.
3-1ASUS PG32UQX Series LCD Monitor
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconfigure
OD
GamePlus
GamrVisual
Dark boost
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
1. After the monitor is turned on, turn the OSD dial left/right to select Menu
and press the OK button to activate the OSD menu.
2. Turn the OSD dial left/right to navigate through the functions. Highlight the
desired function and press the OK button to activate it. If the function selected
has a sub-menu, turn the OSD dial left/right to navigate through the sub-
menu functions. Highlight the desired sub-menu function and press the OK
button to activate it.
3. Turn the OSD dial left/right to change the settings of the selected
function.
4. To exit and save the OSD menu, press the Back button repeatedly or
press the Exit button until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
3-2 Chapter 3: OSD (On-Screen Display) menu
3.1.2 OSD function introduction
1. Gaming
OD
GamePlus
GamrVisual
Dark boost
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
• OD: Improves the gray level response time of the LCD panel. It contains 3
modes including Extreme, Normal and OFF.
• GamePlus: See 1.3.3 GamePlus Function for details.
• GameVisual: See 1.3.4 GameVisual Function for details.
• Dark Boost: Dark color enhancement adjusts monitor’s gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier to see.
2. Image
Brightness
Contrast
Variable Backlight
Aspect Control
Blue Light Filter
Display SDR Input
70
50
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
• Brightness: The adjusting range is from 0 to 100.
When HDR is enabled, Brightness will be changed to Peak White (nits)
1400.
3-3ASUS PG32UQX Series LCD Monitor
• Contrast: The adjusting range is from 0 to 100.
• Variable Backlight: Enables or disables operation with variable backlight.
The options are Fast (preferably for gaming experiences), Medium and
Gradual (preferably for business or word-processing situations).
• Aspect Control: Adjusts the aspect ratio to Full or Aspect.
• Blue Light Filter
* Level 0: No change.
* Level 1~4: The higher the level, the less blue light is scattered. When
Blue Light Filter is activated,the default settings of Racing Mode will
be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not
user-configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
• Display SDR Input: “sRGB” is recommended when using Microsoft
based systems. “Wide Gamut” is recommended when using Mac OS
systems.
3-4 Chapter 3: OSD (On-Screen Display) menu
3. Color
Color Temp.
Six-axis Saturation
Gamma
DP SDR YCbCr sRGB Gamma
HDMI SDR YCbCr sRGB Gamma
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
• Color Temp.: Contains 8 modes including 4000K, 5000K, 6500K, 7500K ,
8200K, 9300K, 10000K and User Mode.
• Six-axis Saturation: Adjusts the saturation for R, G, B, C, M, Y.
• Gamma: Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8.
• DP SDR YCbCr sRGB Gamma: “ON” is sRGB gamma curve and “OFF“
is BT.1886 gamma curve.
• HDMI SDR YCbCr sRGB Gamma: “ON” is sRGB gamma curve and
“OFF“ is BT.1886 gamma curve and matches movie studio mastering
displays.
4. Input Select
In this function, you can select your desired input source and toggle the input
auto switch function between on and off.
DisplayPort
HDMI1
HDMI2
HDMI3
Input Auto Switch
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
3-5ASUS PG32UQX Series LCD Monitor
5. Shortcut
Shortcut(Right)
Shortcut(Left)
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Gaming
Image
Color
Input Select
Shortcut
• Shortcut(Right)/Shortcut(Left): Sets the shortcut functions for shortcut
buttons.
When a certain function is selected or activated, your shortcut button may
not support. Available function choices for shortcut: GamePlus, GameVisual,
Brightness, Contrast, Color Temp., Volume.
6. Lighting Effect
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Lighting Effect
System Setup
Aura Sync
Aura RGB
LIGHT IN MOTION
• Aura Sync: Allows you to turn on or off the Aura Sync function
that synchronizes the Aura RGB light effect among all supported
devices.
• Aura RGB: In this function you can select an Aura RGB light effect for the
monitor and change settings for the light effect. Select “OFF” if you want
to turn the Aura RGB light effect off.
3-6 Chapter 3: OSD (On-Screen Display) menu
• If the Aura Sync function is turned ON, the Aura RGB function will become
unavailable.
• See “3.2 Aura” for information on how to customize Aura light effects from
your computer.
• LIGHT IN MOTION: Selects the brightness level of the light on the stand.
The adjusting range is from “Level 0” to “Level 3”.
7. System Setup
GameVisual
Racing Mode
Input Select
HDMI-1
HDR
OFF
Lighting Effect
System Setup
Language
Sound
Auto SDR Brightness
ECO Mode
Warning Message (HDR)
DisplayPort Deep Sleep
• Language: There are 20 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian.
• Sound:
* Volume: The adjusting range is from 0 to 100.
* Mute: Toggles the monitor sound between on and off.
• Auto SDR Brightness: Synchronizes display brightness with ambient
light changes.
Since HDR10 is an absolute standard, where the content denes the absolute
nits level, Auto SDR Brightness in HDR mode is not available.
• ECO Mode: Reduces power consumption.
• Warning Message (HDR): Allows you to turn on or off the warning
message under HDR Mode.
• DisplayPort Deep Sleep: Puts the DisplayPort port into deep sleep.
• HDMI Deep Sleep: Puts the HDMI port into deep sleep.
3-7ASUS PG32UQX Series LCD Monitor
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button on the monitor to wake it up.
- Disable the Deep Sleep function.
• Key Lock: To disable all function keys. Press the OK button for over 5
seconds to cancel the key lock function.
• OSD Setup:
* OSD Position: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
* OSD Timeout: Adjusts the OSD timeout from 10 to 120 seconds.
* Transparency: Adjusts the OSD background from opaque to
transparent.
• LiveDash:
* PC Control: When “ON” is selected, the infromation displayed
on the LiveDash OLED panel is controlled by the Armoury Crate
software.
* OSD Control: Sets the information to be displayed on the LiveDash
OLED panel.
When a certain function is selected or activated, some options may not be
available.
* Brightness: Selects the brightness level of the LiveDash OLED panel
on the front of the monitor. The adjusting range is from “OFF” to “Level
3”.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.
3-8 Chapter 3: OSD (On-Screen Display) menu
3.2 Aura
Armoury Crate is a software program that controls the colorful LEDs on supported
devices, such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura
allows you to adjust the color of the RGB LEDs on these devices and select
different light effects. You can also correct or adjust the color of the LEDs by
calibrating them. The LiveDash OLED panel is controlled by this software as well.
1. To activate Aura, turn ON the Aura Sync function in the OSD menu. To
activate LiveDash, turn ON the PC Control function in the System Setup >
LiveDash menu.
2. Connect the USB 3.0 upstream port of the monitor to the USB port of your
computer.
3. Install Armoury Crate and then restart the computer.
4. Execute Armoury Crate.
Below is the overview of this program.
• If the USB upstream connection between the monitor and computer is
disconnected, to resume the Aura function, you need to re-connect the
USB 3.0 upstream port of the monitor to the computer and then restart the
computer.
• Visit https://rog.asus.com/innovation/armoury_crate/ for more details.
3-9ASUS PG32UQX Series LCD Monitor
3.3 Specicationssummary
Panel Type TFT LCD
Panel size 32.0" (16:9, 81.28 cm) wide screen
Max. Resolution 3840 x 2160
Pixel pitch 0.1845 mm
Brightness 500 cd/m2 (Typ./SDR on), 1400 cd/m2 (typ./HDR on)
Contrast Ratio (Typ.) 1,000:1
Contrast Ratio (Max.) 400,000:1
Viewing angle (H/V) CR>10 178˚/178˚
Display colors 1073.7 M (10 bit)
Color gamut DCI-P3 98%
Response time 4 ms (Gray to gray)
Color temperature selection 8 color temperatures
Digital input
HDMI v2.0b, DisplayPort v1.4
Earphone jack Yes
USB port Downstream x 3 (USB 3.0 x 2, USB 2.0 x 1), upstream x 1
Color Black
Power LED White (On)/Amber (Standby)
Tilt +20˚~ -5˚
Swivel +20˚~ -20˚
Pivot No
Height Adjustment 70 mm
Kensington lock Yes
Voltage rating AC: 100~240V
DC: 20.0V 14A
Power consumption Power On: < 58.47 W** (Typ.), Standby: < 0.5 W,
Power Off: < 0.3 W
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimension (W x H x D) 727 mm x 574 mm x 306 mm (with stand, highest)
727 mm x 504 mm x 306 mm (with stand, lowest)
727 mm x 441 mm x 96 mm (without stand)
863 mm x 610 mm x 284 mm (package)
Weight (Esti.) 7.6 kg (without stand); 10.9 kg (Net); 17.3 kg (Gross)
Multi-languages 20 languages (English, French, German, Italian,
Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish,
Simplied Chinese, Traditional Chinese, Japanese,
Korean, Thai, Indonesian)
Accessories Quick start guide, warranty card, power adapter,
power cord, HDMI cable, DisplayPort cable, USB
cable,ROG welcome card with envelope, color
calibration testing report, input/output port cover, wall
mount screws, tripod screw, LED projection cover and
changeable lms, ROG sticker
3-10 Chapter 3: OSD (On-Screen Display) menu
Compliance and Standards
cTUVus, CB, CE, FCC, CCC, BSMI, CU, VCCI,
J-MOSS, RoHS, WEEE, PSE, KCC, ICES-3, ErP,
CEL, ISO 9241-307, UkrSEPRO, RCM, PC Recycle,
e-Standby, TUV Flicker Free, TUV Low Blue Light,
PSB, CEC, Windows 7 and 10 WHQL
*Specications are subject to change without notice.
**measuring a screen brightness of 200 nits without audio/USB/Card reader connection.
3-11ASUS PG32UQX Series LCD Monitor
3.4 Outlinedimensions
3-12 Chapter 3: OSD (On-Screen Display) menu
3.5 Troubleshooting(FAQ)
Problem Possible Solution
Power LED is not ON • Press any button to check if the monitor is
in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
The power LED lights amber and there is
no screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
No sound or sound is low • Ensure that the HDMI/DisplayPort cable is
properly connected to the monitor and the
computer.
• Adjust the volume settings of both
your monitor and HDMI/DisplayPort
device.
• Ensure that the computer sound
card driver is properly installed and
activated.
HDR content is not played properly • Make sure the input source supports HDR
playback (with proper system settings and
latest software).
• Make sure the content is HDR encoded.
LiveDash OLED panel is not ON • Adjust the LiveDash brightness setting to
Level 1 to Level 3 via OSD.
3-13ASUS PG32UQX Series LCD Monitor
3.6 Supportedoperatingmodes
Resolution Frequency HDMI DisplayPort
Refresh rate (Hz) Refresh rate (Hz)
640 x 480 59.9 60
800 x 600 60.3 60
1024 x 768 60 60
1920 x 1080 - 144
2560 x 1440 60 -
2560 x 1440 120 -
2560 x 1440 144 144
3840 x 2160 60 24
3840 x 2160 - 30
3840 x 2160 - 60
3840 x 2160 - 72
3840 x 2160 - 96
3840 x 2160 - 120
3840 x 2160 - 144
When the monitor is operating in the video mode (ie, not displaying data) using the HDMI
connector, the following high denition modes shall be supported in addition to standard denition
video.
Resolution Frequency Refresh rate (Hz)
640 x 480p 59.94
720 x 480p 59.94
720 x 576p 50
1280 x 720p 50
1280 x 720p 59.94
1920 x 1080p 23.98
1920 x 1080p 50
1920 x 1080p 59.94
1920 x 1080p 119.88
3840 x 2160p 23.98
3840 x 2160p 25
3840 x 2160p 29.97
3840 x 2160p 50
3840 x 2160p 59.94
3840 x 2160p 120
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
G-SYNC (only for DisplayPort input) supported NVIDIA GPUs: NVIDIA AMPERE GPU graphic card
like RTX30 series or higher. For other GPUs, please contact the manufactures to see if they are
compatible.
3-14 Chapter 3: OSD (On-Screen Display) menu