Table of Contents
ASUS PG35VQ User Manual
Displayed below is the user manual for PG35VQ by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ii
First Edition
May 2019
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 GamePlus function .......................................................... 1-5
1.3.4 Using the sound hotkey .................................................. 1-6
1.3.5 G-SYNC HDR ................................................................. 1-6
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
iv
Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent re or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in re
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate congured receptacles marked between 100-240V AC.
• If you encounter technical problems with the monitor, contact a qualied service
technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
• The adapter is only used for this monitor, do not use it for other purpose.
Your device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP-280BB B
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• The screen may icker during the initial use due to the nature of the uorescent
light. Turn off the Power Switch and turn it on again to make sure that the
icker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1-1ASUS PG35V Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power adapter
Power cord
DP cable
HDMI cable
USB cable
LED projection cover and changeable lms
Input/Output port cover
Wall mount screws
Color Calibration Testing Report
ROG welcome card
If any of the above items is damaged or missing, contact your retailer
immediately.
Select “ON” when you see the message “AURA & LIGHT IN MOTION” appears
if you want to turn on the light on the rear cover and stand. If you disable this
function but later wish to reactivate it, please use the OSD menu to turn it on.
If no signal is detected for around 12 minutes, the monitor automatically enters
saving mode.
1-2 Chapter 1: Product introduction
Monitor introduction
1
2
3
4
5
6
1. ( 5-way) button
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
2. button
• Exits the OSD menu item.
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
3. button
• GamePlus hotkey. Move the ( ) button up/down to select and
press ( ) to confirm the function needed.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
4. button
• Sound hotkey. Move the ( ) button up/down to select and press
( ) to confirm the function needed.
1-3ASUS PG35V Series LCD Monitor
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
White ON
Amber ashing Entering standby mode
Amber Standby mode/No signal
OFF OFF
Green HDR
Red G-SYNC
6. Ambient light sensor.
4 5 76 8
13
12
11
9
13
This port connects the power cord.
This port is for connection with an HDMI compatible device.
This port is for connection for a DisplayPort compatible device.
. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
This port is only available when an HDMI/DisplayPort cable
or USB cable is connected.
.
1-4 Chapter 1: Product introduction
Do not cover the ventilation slots on the monitor. Heat build-up can reduce the
service life of your monitor and also be dangerous.
Do not cover the ventilation slots on the monitor. Heat build-up can reduce the
service life of your monitor and also be dangerous.
1-5ASUS PG35V Series LCD Monitor
The GamePlus function provides a toolkit and creates a better gaming environment
for users when playing different types of games. The crosshair overlay with 6
different crosshair options lets you choose the one that best suits the game you're
playing. There's also an onscreen timer you can position on the left of the display
so you can keep track of the elapsed gaming time; while the FPS (frames per
second) counter lets you know how smooth the game is running. Display Alignment
displays alignment lines on 4 sides of the screen, serving as an easy and handy
tool for you to line up multiple monitors perfectly.
To activate GamePlus:
1. Press the GamePlus hotkey.
2. Move the ( ) button up/down to select among different functions.
3. Press the ( ) button or move the ( ) button right to confirm the
function you choose, and move the ( ) button up/down to navigate
through the settings. Move the ( ) button left to go back, off, and exit.
4. Highlight the desired setting and press the ( ) button to activate it.
Press the button to inactivate it.
GamePlus Main Menu GamePlus — Crosshair GamePlus — Timer
NEXT BACK/EXIT
GamePlus
FPS
Crosshair
Timer
FPS Counter
Display Alignment
(Practice Mode)
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus
1-6 Chapter 1: Product introduction
There are 2 audio paths, either from the USB cable or from the HDMI/DisplayPort
cable. After pressing the sound hotkey, the sound settings for you to determine the
audio path and to adjust the volume will appear.
: You can select between USB (Hi-Res support) or HDMI/DP
path.
: Supports high-resolution audio
playback. USB cable should be plugged into the upstream port of
the monitor to connect the monitor and the input source device.
Corresponding output path should also be selected on the connected
ROG Gaming Display Audio Device.
: The audio comes for the HDMI/DP cable along with the
video signal.
: Move the ( ) button up/down to adjust the monitor
volume.
NEXT BACK/EXIT
Sound
Audio Path
Volume
The monitor supports HDR format. When detecting HDR content, an "HDR ON"
message will pop up and display in the OSD menu.
• When displaying HDR content, the following function(s) are not available:
GameVisual, Gamma, Dark Boost, "OFF" in the Variable Backlight, Auto
SDR Brightness.
• NVIDIA Pascal GPU Graphics Card like GTX1070, GTX1080 and
GTX1080 Ti or higher is required.
2-1ASUS PG35V Series LCD Monitor
2.1 Assembling the monitor arm/base
Do not remove the monitor from the packaging box before attaching the stand.
To assemble the monitor base:
1. After opening the box, remove the foam cushions. (Figure 1)
(Figure 1)
2. Insert the base into the arm, and attach the LED projection cover to the stand
after removing the plastic cap. (Figure 2)
3
1
2
(Figure 2)
To change the lm on the LED projection cover, follow the illustration below.
12
2-2 Chapter 2: Setup
3. Remove the tape that fastens the stand and place the monitor upright. (Figure
3)
4. Remove the cover from the monitor. (Figure 4)
1
2
(Figure 3) (Figure 4)
Do not press on the screen when lifting the monitor. Lift the monitor carefully to
prevent it from slipping or falling.
2-3ASUS PG35V Series LCD Monitor
2.2 Cable management
You can organize the cables with the help of the input/output port cover.
the cover can be attached or detached.
2-4 Chapter 2: Setup
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +21˚ to -6˚ (for tilt)/+35˚ to -35˚ (for
swiveling)/ +100 mm (for height adjustment).
100mm
-6° ~ +21°
35°
0°
35 °
(Tilt) (Swivel) (Height adjustment)
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2-5ASUS PG35V Series LCD Monitor
2.4 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Use a screwdriver to remove the covers on where the monitor and the arm
meet.
3. Loosen the four screws on the back of the monitor and remove the arm/base.
4. Fasten the wall mount screws.
1 2 3 4 5
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
2-6 Chapter 2: Setup
2.5 Connecting the cables
Connect the cables as the following instructions:
a. Connect the power adapter securely to the monitor’s DC IN input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/
HDMI port.
b. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI port.
connect the end with plug type to the monitor’s
earphone jack.
Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
2.6 Turning on the monitor
Press the power button. See page 1-3 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
3-1ASUS PG35V Series LCD Monitor
3.1 OSD (On-Screen Display) menu
MOVE/ENTER BACK EXIT
Max Refresh Rate 200 Hz
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) button left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
This function allows you to activate the maximum refresh rate.
MOVE/ENTER BACK EXIT
Max Refresh Rate 200 Hz
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
3-2 Chapter 3: General Instructions
: allows you to select a maximum refresh rate
of 200Hz (Only for DisplayPort input). After selecting, press the ( )
button twice to activate the setting.
• This function is only available when the color gamut is YUV422, or RGB/
YUV444 with 8-bit color depth or below.
• After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA
Control Panel. If you don’t see an image, disconnect the DP cable and use
the monitor OSD to try again with a safer Max Refresh Rate.
In this function, you can adjust the blue light filter level.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
Level 0
Level 1
Level 2
Level 3
Level 4
No change.
The higher the level, the less blue light is scattered. When
Blue Light Filter is activated,the default settings of Racing Mode will
be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
3-3ASUS PG35V Series LCD Monitor
This function contains 6 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
Scenery Mode
Racing Mode
Cinema Mode
RTS/RPG Mode
FPS Mode
sRGB Mode
: This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
: This is the best choice for Real-Time Strategy (RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
: This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
: This is the best choice for viewing photos and graphics from
PCs.
• In the Racing mode, the following function(s) are not user-configurable:
Saturation.
• In the sRGB mode, the following function(s) are not user-congurable:
Saturation, Color Temp., Brightness, Contrast.
3-4 Chapter 3: General Instructions
You can set the color related setting from this menu.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
Brightness
Reference White (nits)
Contrast
Color Temp.
Gamma
60
50
: The adjusting range is from 0 to 100.
When HDR is enabled, will be changed to
and cannot be adjusted in SDR and HDR
mode.
: The adjusting range is from 0 to 100.
: Contains 4 modes including Cool, Normal, Warm, and
User Mode.
: Allows you to set the color mode to 1.8, 2.0, 2.2, 2.4 or 2.6.
You can set the image related setting from this menu.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
OD
Dark Boost
Variable Backlight
Auto Black Level
Aspect Control
: Improves the gray level response time of the LCD panel. It contains
3 modes including Extreme, Normal and OFF.
: Dark color enhancement adjusts monitor’s gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier to see.
Enables or disables operation with variable
backlight. The options are Fast (preferably for gaming experiences),
Medium and Gradual (preferably for business or word-processing
situations).
3-5ASUS PG35V Series LCD Monitor
A slight halo effect may be noticed on dark backgrounds when the function is
enabled. This is normal and not a malfunction.
: Increases the black level according to the ambient
brightness, making different shades of grey more visible to human eyes.
: Adjusts the aspect ratio to Full, Aspect, or 1:1.
In this function, you can select your desired input source and toggle the input
auto switch function between on and off.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
DisplayPort
HDMI
Input Auto Switch
Allows you to adjust the system.
MOVE/ENTER BACK EXIT
Normal Mode DisplayPort 3440x1440@60 Hz
HDR Off Racing Mode Aura Off
ROG Swift PG35V
Over Clocking
Blue Light Filter
GameVisual
Color
Image
Input Select
System Setup
Language
LIGHT IN MOTION
Aura Sync
Aura RGB
OSD Position
Transparency
OSD Timeout
OK
0
30
: There are 20 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian.
: Selects the brightness level of the light on the stand.
The adjusting range is from Level 0 to 3.
: Allows you to turn on or off the Aura Sync function that
synchronizes the Aura RGB light effect among all supported devices.
: In this function you can select an Aura RGB light effect for the
monitor and change settings for the light effect. Select “OFF” if you want
to turn the Aura RGB light effect off.
3-6 Chapter 3: General Instructions
• If the Aura Sync function is turned ON, the Aura RGB function will become
unavailable.
• See 3.2 Aura for information on how to customize Aura light effects from
your computer.
: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
: Adjusts the OSD background from opaque to transparent.
: Adjusts the OSD timeout from 10 to 120 seconds.
: To disable all function keys. Press over 5 seconds to
cancel the key lock function.
: Shows the monitor information.
:
: The adjusting range is from 0 to 100.
: The default setting is off.
: Toggles the monitor sound between on and off.
: Puts the DisplayPort port into deep sleep.
: Puts the HDMI port into deep sleep.
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button (except the power button) on the monitor to wake it up.
- Disable the Deep Sleep function. (The fan will continue to operate in standby
mode and off mode, if necessary.)
Reduces power consumption.
ECO mode minimizes power consumption at the expense of image quality. Turn
it off for best image quality (Recommended).
: Synchronizes display brightness with ambient
light changes.
Since HDR10 is an absolute standard, where the content denes the absolute
nits level, Auto SDR Brightness in HDR mode is not available.
: Allows you to turn on or off the warning
message under HDR Mode.
: “ON” is sRGB gamma curve and “OFF“
is BT.1886 gamma curve.
: “ON” is sRGB gamma curve and
“OFF“ is BT.1886 gamma curve and matches movie studio mastering
displays.
3-7ASUS PG35V Series LCD Monitor
: “sRGB” is recommended when using Microsoft
based systems. “Wide Gamut” is recommened when using Mac OS
systems.
: “Yes” allows you to restore the default settings.
3-8 Chapter 3: General Instructions
3.2 Aura
AURA is a software program that controls the colorful LEDs on supported devices,
such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura allows
you to adjust the color of the RGB LEDs on these devices and select different light
effects. You can also correct or adjust the color of the LEDs by calibrating them.
To activate Aura:
1. Turn ON the function in the OSD menu.
2. Connect the USB 3.0 upstream port of the monitor to the USB port of your
computer.
3. Install AURA and then restart the computer.
4. Double-click the AURA program icon on your desktop.
Refer to the gure below for information about the AURA program functions.
Adjust AURA lighting options
Select the desired AURA lighting
effect when the system has been
turned on
Click to enable the
default settings
Click to undo the changes
Click to apply the
changes
• If the USB upstream connection between the monitor and computer is
disconnected, to resume the Aura function, you need to re-connect the
USB 3.0 upstream port of the monitor to the computer and then restart the
computer.
• Visit https://www.asus.com/campaign/aura for more details.
3-9ASUS PG35V Series LCD Monitor
3.3 Specications summary
TFT LCD
35.03”W (21:9, 88.98 cm) wide screen
3440 x 1440
0.2382 mm x 0.2402 mm
1000 cd/m2 (Peak/HDR on)
2500:1
178˚/178˚
16.7 M
2 ms (Gray to Gray)
4 color temperatures
No
DisplayPort v1.4 x 1, HDMI v2.0 x 1
Yes
No
No
Upstream x 1, Downstream x 2
Black
White (On)/Amber (Standby)/Red (G-Sync)/Green
(HDR)
+21˚~ -6˚
+35˚~ -35˚
100 mm
100 x 100 mm
Yes
AC: 100~240V
DC: 20V, 14A (AC adapter)
Power On: < 280 W, Standby: < 0.5 W,
Power Off: < 0.5 W
0˚C~40˚C
-20˚C~+60˚C
833 mm x 549 mm x 306 mm (Highest)
833 mm x 449 mm x 306 mm (Lowest)
986 mm x 587 mm x 322 mm (package)
10.5 kg (without stand); 13.6 kg (Net); 20.4 kg
(Gross);
20 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatian, Polish, Romanian, Hungarian,
Turkish, Simplied Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesian)
3-10 Chapter 3: General Instructions
DP cable, HDMI cable, USB cable, power
adapter, power cord, quick start guide, warranty
card, LED projection cover and changeable lms,
input/output port cover, wall mount screws, color
calibration testing report, ROG welcome card
UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, CU,
C-Tick, VCCI, PSE, CEL, J-MOSS, RoHS,
WEEE, Windows 7 & 8.1& 10 WHQL, KCC,
E-STANDBY, TUV-Flicker Free, TUV Low Blue
Light, UkrSEPRO, RCM
3-11ASUS PG35V Series LCD Monitor
3.4 Outline dimensions
813,98 [32.0]-Active-Area
833,35 [32.8]
407 [16.0]
170,46 [6.7]
23 [.9]
192,28 [7.6]
345,89-Active-Area
[13.6]
379,91 [15.0]
549,19 [21.6]
3,74 [.1]
2,67 [.1]
3,74 [.1]
305,59 [12.0]
305,61 [12.0]
366,47 [14.4]
435,69 [17.2]
89,6 [3.5]
169,28 [6.7]
100 [3.9]
100[3.9]
526,27 [20.7]
9,77 [.4]
9,7 [.4]
149,53 [5.9]
21 6
35°
35°
ASUS PG35V Outline Dimension
*Unit:mm(inch) Swivel:+/-35 Degree
266.47[10.5]
100[3.93]
117[4.61]
117[4.61]
M4*4-Depth 10mm
Wall mount keep out area
157.22[6.19]
168.57[6.64]
228.04[8.98]
3-12 Chapter 3: General Instructions
3.5 Troubleshooting (FAQ)
Power LED is not ON • Press the power button to check if the
monitor is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights white and there is no
screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
HDR content is not played properly • Make sure the input source supports HDR
playback (with proper system settings and
latest software).
• Make sure the content is HDR encoded.
A corrupted half-size image is displayed
when playing 4K HDR content.
• Check the chroma settings in the image
source for correct HDR operation.
Manually adjust the related settings.
Contact the device manufacturer if the
problem persists.
3-13ASUS PG35V Series LCD Monitor
3.6 Supported operating mode
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
3440 x 1440 60Hz
3440 x 1440* 100Hz
800 x 600 60Hz
1024 x 768 60Hz
3440 x 1440 60Hz
3440 x 1440 100Hz
3440 x 1440 120Hz
3440 x 1440* 144Hz
3440 x 1440** 180Hz
3440 x 1440** 200Hz
3-14 Chapter 3: General Instructions
3440 x 1440* 200Hz
Please note that Over Clocking function/performance depends on the GPUs,
contents displayed, viewing distance/angle, refresh rate and user eyes
sensitivity. ASUS only provides this function. The performance or any side effect
after activation is not guaranteed. Side effect, such as decayed contrast ratio or
waterfall is not a product defect but trade off.
