Table of Contents
ASUS PG65UQ User Manual
Displayed below is the user manual for PG65UQ by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ii
First Edition
July 2019
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 Remote control ................................................................ 1-4
1.3.4 Other Function(s) ............................................................ 1-5
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-2
iv
Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent re or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in re
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate congured receptacles marked between 100-240V AC.
• If you encounter technical problems with the monitor, contact a qualied service
technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• The screen may icker during the initial use due to the nature of the uorescent
light. Turn off the Power Switch and turn it on again to make sure that the
icker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1-1ROG Swift PG65U Series Gaming Monitor
1.1 Welcome!
Thank you for purchasing the ROG Gaming Monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Remote control
Power cord
DP cable
HDMI cable
USB cable
Aura Sync ROG logo projector
Cable management hook
Hexagon key
Calibration report
If any of the above items is damaged or missing, contact your retailer
immediately.
If no signal is detected for around 12 minutes, the monitor automatically enters
saving mode.
It is recommended that you set the DisplayPort Deep Sleep and HDMI Deep
Sleep functions to “OFF”.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
6
1
2
3
4
5
1. 5-way ( ) button
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right.
• Turns on the OSD menu when the monitor enters standby mode.
2. Hotkey button 1
• Input Select hotkey.
• Turns on the OSD menu when the monitor enters standby mode.
3. Hotkey button 2
• Brightness hotkey.
• Turns on the OSD menu when the monitor enters standby mode.
4. Exit button
• Exits the OSD menu item.
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
5. Power button
• Turns the monitor on/off.
1-3ROG Swift PG65U Series Gaming Monitor
6. Power indicator
• The color definition of the power indicator is as the below table.
White ON
Amber ashing Entering standby mode
Amber Standby mode/No signal
OFF OFF
Red G-SYNC
Green HDR
1 2 3 4 5 6 7 8
10
9
11
. This port is for outputting audio S/PDIF signal.
These ports are for connection with an HDMI compatible device.
This port is for connection for a DisplayPort compatible device.
This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
This port connects the power cord.
. Press the switch to turn on/off power.
.
1-4 Chapter 1: Product introduction
ENTER
2
6
4
7
1
3
5
8
1. Power button
• Turns the monitor on/off.
2. Input Select button:
• Selects an available input source.
Press button (Input Select button) to display DisplayPort, HDMI-1, HDMI-2,
HDMI-3, HDMI-4 signals after you connect DisplayPort/HDMI cable with the
monitor.
3. Directional arrow buttons
• Turns on the OSD main menu.
• Increases/Decreases values or moves your selection up/down/left/right.
1-5ROG Swift PG65U Series Gaming Monitor
4. ENTER button
• Turns on the OSD main menu.
• Enacts the selected OSD menu item.
5. Exit button
• Exits the OSD menu item.
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
6. Shortcut button 1
• Default: Brightness.
• Turns on the OSD menu when the monitor enters standby mode.
• To change the shortcut function, go to the System Setup > Shortcut on
Remote menu.
7. Shortcut button 2
• Default: Brightness.
• Turns on the OSD menu when the monitor enters standby mode.
• To change the shortcut function, go to the System Setup > Shortcut on
Remote menu.
8. Volume button
• Decreases or increases the sound level.
1.3.4 OtherFunction(s)
G-SYNCUltimate
The monitor supports HDR format. When detecting HDR content, an "HDR ON"
message will pop up and display in the OSD menu.
• When displaying HDR content, the following function(s) are not available:
GameVisual, Gamma, Dark Boost, "OFF" in the Variable Backlight, Auto
SDR Brightness.
• NVIDIA Pascal GPU Graphics Card like GTX1070, GTX1080 and
GTX1080 Ti or higher is required.
1-6 Chapter 1: Product introduction
2-1ROG Swift PG65U Series Gaming Monitor
2.1 Detaching the base (for VESA wall mount)
The detachable base of this monitor is specially designed for VESA wall mount.
To detach the base:
1. Have the front of the monitor face down on a table.
2. Use the hexagon key to loosen the four screws on the back of the monitor
and remove the base.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (400 x 400 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
40kg (Screw size: M6 x 10 mm)
2.2
Cable management
You can organize the cables with the help of the cable management hook.
2-2 Chapter 2: Setup
2.3
Installing the Aura Sync ROG logo
projector
Screw the Aura Sync ROG logo projector to the back of the monitor and connect
the other end to the mini-USB port of the monitor.
2
3
1
2.4 Connecting the cables
Connect the cables as the following instructions:
For service only
Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
a. Plug one end of the DisplayPort/HDMI cable to the monitor’s DisplayPort/
HDMI port.
b. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI port.
2-3ROG Swift PG65U Series Gaming Monitor
Take an USB 3.0 cable, and plug the smaller
end (type B) of the USB upstream cable to the monitor’s USB upstream port,
and the larger end (type A) to your computer’s USB 3.0 port. Make sure your
computer is installed with the lastest Windows 7/Windows 8.1/Windows 10
operating system. That will enable the USB ports on the monitor to work.
2.5 Turning on the monitor
Press the power button. See page 1-3 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2-4 Chapter 2: Setup
3-1ROG Swift PG65U Series Gaming Monitor
3.1 OSD (On-Screen Display) menu
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Over Clocking
Max Refresh Rate
Over Clocking
Sound
Color
Image
Input Select
System Setup
1. Press the 5-way ( ) button on the monitor or directional arrow buttons/
ENTER button on the remote control to activate the OSD menu.
2. Move the 5-way ( ) button up/down/left/right or press the / / /
button to navigate through the functions. Highlight the desired function and
press the the 5-way ( ) button or ENTER button to activate it. If the function
selected has a sub-menu, move the 5-way ( ) button up/down/left/right
or press the / / / button again to navigate through the sub-menu
functions. Highlight the desired sub-menu function and press the the 5-way (
) button or ENTER button to activate it.
3. Move the 5-way ( ) button up/down/left/right or press the / / /
button to change the settings of the selected function.
4. To exit and save the OSD menu, press the Exit button on the monitor or the
button on the remote control. To adjust other functions, repeat steps 1-3.
3-2 Chapter 3: General Instructions
This function allows you to adjust the refresh rate.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Over Clocking
Max Refresh Rate
Over Clocking
Sound
Color
Image
Input Select
System Setup
: Allows you to select a maximum refresh rate of 144Hz
(Only for DisplayPort input). After selecting, press the ( ) button
twice to activate the setting.
• This function is only available when the color gamut is YUV422 with 10-bit
color depth or below.
• After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA
Control Panel. If you don’t see an image, disconnect the DP cable and use
the monitor OSD to try again with a safer Max Refresh Rate.
In this function, you can adjust sound related settings.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Sound
Volume
Mute
Audio Output
AudioWizard
80
Over Clocking
Sound
Color
Image
Input Select
System Setup
: The adjusting range is from 0 to 100.
Toggles the monitor sound between on and off.
3-3ROG Swift PG65U Series Gaming Monitor
: Allows you to set the audio output path between Internal
Speaker and SPDIF.
Once SPDIF is selected, Volume and AudioWizard are not available.
: Contains 3 audio modes including Gaming Mode, Movie
Mode and OFF Mode.
You can set the color related setting from this menu.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Color
Brightness
Reference White
Contrast
Color Temo.
Gamma
(nits)
90
50
Over Clocking
Sound
Color
Image
Input Select
System Setup
: The adjusting range is from 0 to 100.
When HDR is enabled, will be changed to
and cannot be adjusted.
:Displays the range only.
: The adjusting range is from 0 to 100.
: Contains 4 modes including Cool, Normal, Warm, and User
Mode.
: Allows you to set the color mode to 1.8, 2.0, 2.2, 2.4 or 2.6.
3-4 Chapter 3: General Instructions
You can set the image related setting from this menu.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Image
OD
GameVisual
Blue Light Fillter
Dark Boost
Variable Backlight
Auto Black Level
Aspect Control
Over Clocking
Sound
Color
Image
Input Select
System Setup
: Improves the gray level response time of the LCD panel. It contains
3 modes including Extreme, Normal and OFF.
:
: This is the best choice for scenery photo displaying
with GameVisualTM Video intelligence Technology.
: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
: This is the best choice for Real-Time Strategy
(RTS)/Role-Playing Game (RPG) playing with GameVisualTM Video
intelligence Technology.
: This is the best choice for First Person Shooter game
playing with GameVisualTM Video intelligence Technology.
: This is the best choice for viewing photos and graphics
from PCs.
• In the sRGB mode, the following function(s) are not user-congurable:
Color Temp., Brightness, Contrast, Gamma.
• In the Scenery and Cinema modes, the following function(s) are not user-
congurable: Gamma, Dark Boost.
:
: No change.
: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing
Mode will be automatically imported. Between Level 1 to Level 3,
the Brightness function is user-configurable. Level 4 is optimized
setting. It is compliance with TUV Low Blue Light Certification. The
Brightness function is not user-configurable.
3-5ROG Swift PG65U Series Gaming Monitor
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
: Dark color enhancement adjusts monitor’s gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier to see.
Enables or disables operation with variable backlight.
The options are Fast (preferably for gaming experiences), Medium and
Gradual (preferably for business or word-processing situations).
A slight halo effect may be noticed on dark backgrounds when the function is
enabled. This is normal and not a malfunction.
: Increases the black level according to the ambient
brightness, making different shades of grey more visible to human eyes.
: Adjusts the aspect ratio to Full, Aspect, or 1:1.
In this function, you can select your desired input source and toggle the input
auto switch function between on and off. When Input Auto Switch is enabled,
the monitor will spend up to 2 minutes searching for available input source. If
no input source is detected, disable this function and manually select one.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Input Select
DisplayPort
HDMI-1
HDMI-2
HDMI-3
HDMI-4
Input Auto Switch
Over Clocking
Sound
Color
Image
Input Select
System Setup
3-6 Chapter 3: General Instructions
Allows you to adjust the system.
ENTER BACK EXIT
Scenery Mode
GameVisual
HDMI-1
Input Select
Refresh Rate
60 Hz
Aura RGB
OFF
Over Clocking
Sound
Color
Image
Input Select
System Setup
System Setup
Language
Aura Sync
Aura RGB
GamePlus
Transparency
OSD Timeout
Key Lock
: There are 9 languages for your selection, including English,
French, Turkish, Simplified Chinese, Traditional Chinese, Japanese,
Korean, Persian, Arabic.
: Allows you to turn on or off the Aura Sync function that
synchronizes the Aura RGB light effect among all supported devices.
: In this function you can select an Aura RGB light effect for the
monitor and change settings for the light effect. Select “OFF” if you want
to turn the Aura RGB light effect off.
• If the Aura Sync function is turned ON, the Aura RGB function will become
unavailable.
• See 3.2 for information on how to customize Aura light effects from your
computer.
: The GamePlus function provides a toolkit and creates a better
gaming environment for users when playing different types of games. The
crosshair overlay with different crosshair options lets you choose the one
that best suits the game you’re playing. There’s also an onscreen timer
you can position on the left of the display so you can keep track of the
elapsed gaming time; while the FPS (frames per second) counter lets you
know how smooth the game is running.
GamePlus Main Menu GamePlus — Crosshair
Crosshair
Timer
FPS Counter
System Setup
GamePlus
GamePlus
Crosshair
3-7ROG Swift PG65U Series Gaming Monitor
GamePlus — Timer GamePlus — FPS Counter
GamePlus
Timer
30:00
40:00
50:00
60:00
90:00
GamePlus
FPS Counter
Refresh Rate
FPS Counter
: Adjusts the OSD background from opaque to transparent.
: Adjusts the OSD timeout from 10 to 120 seconds.
: To disable all function keys. Press over 5 seconds to
cancel the key lock function.
: Shows the monitor information.
: Puts the DisplayPort port into deep sleep.
: Puts the HDMI port into deep sleep.
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button (except the power button) on the monitor to wake it up.
- Disable the Deep Sleep function. (Recommended)
Reduces power consumption.
ECO mode minimizes power consumption at the expense of image quality. Turn
it off for best image quality (Recommended).
: Synchronizes display brightness with ambient
light changes.
Since HDR10 is an absolute standard, where the content denes the absolute
nits level, we do not discourage use of Auto SDR Brightness in HDR mode.
: “sRGB” is recommended when using Microsoft
based systems. “Wide Gamut” is recommened when using Mac OS
systems.
: Allows you to turn on or off the warning
message under HDR Mode.
: “ON” is sRGB gamma curve and “OFF“
is BT.1886 gamma curve.
3-8 Chapter 3: General Instructions
: “ON” is sRGB gamma curve and
“OFF“ is BT.1886 gamma curve and matches movie studio mastering
displays.
: Defines the functions for Shortcut 1 and 2 buttons
on the remote control. When a certain function is selected or activated,
your shortcut key may not support. Available function choices for shortcut:
Brightness, Contrast, Volume, Input Select, GamePlus, GameVisual.
: “Yes” allows you to restore the default settings.
3-9ROG Swift PG65U Series Gaming Monitor
3.2 ASUS Aura
AURA is a software program that controls the colorful LEDs on supported devices,
such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura allows
you to adjust the color of the RGB LEDs on these devices and select different light
effects. You can also correct or adjust the color of the LEDs by calibrating them.
To activate Aura:
1. Turn ON the function in the OSD menu.
2. Connect the USB 3.0 upstream port of the monitor to the USB port of your
computer.
3. Install AURA and then restart the computer.
4. Double-click the AURA program icon on your desktop.
Refer to the gure below for information about the AURA program functions.
Adjust AURA lighting options
Select the desired AURA lighting
effect when the system has been
turned on
Click to enable the
default settings
Click to undo the changes
Click to apply the
changes
• If the USB upstream connection between the monitor and computer is
disconnected, to resume the Aura function, you need to re-connect the
USB 3.0 upstream port of the monitor to the computer and then restart the
computer.
• Visit https://www.asus.com/campaign/aura for more details.
3-10 Chapter 3: General Instructions
3.3 Specications summary
TFT LCD
65”W (16:9, 64.53") wide screen
3840 x 2160
372 x 372 mm
1000 cd/m2 (Peak/HDR on)
4000:1
178˚/178˚
16.7 M
4 ms (Gray to Gray)
4 color temperatures
No
DisplayPort v1.4 x 1, HDMI v2.0 x 4
Yes
No
Yes
Upstream x 1, Downstream x 2
Black
White (On)/Amber (Standby)/Red (G-Sync)/Green
(HDR)
No
No
No
400 x 400 mm
Yes
AC: 8.0 A, 100~240V
Power On: < 700 W (2s), Standby: < 0.5 W,
Power Off: < 0.5 W
0˚C~40˚C
-20˚C~+60˚C
1448.08 mm x 946.9 mm x 389.82 mm (with
stand)
1448.08 mm x 863.83 mm x 87.2 mm (without
stand)
1630 mm x 1104 mm x 507 mm (package)
36.8 kg (Net); 57.5 kg (Gross)
9 languages (English, French, Turkish, Simplied
Chinese, Traditional Chinese, Japanese, Korean,
Persian, Arabic)
3-11ROG Swift PG65U Series Gaming Monitor
Quick start guide, warranty card, remote control,
power cord, DP cable, HDMI cable, USB
cable, Aura Sync ROG logo projector, cable
management hook, hexagon key, calibration
report
UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, CU,
C-Tick, VCCI, PSE, CEL Level 3, J-MOSS,
RoHS, WEEE, Windows 7 & 8.1& 10 WHQL,
KCC, E-STANDBY, TUV-Flicker Free, TUV Low
Blue Light, UkrSEPRO, RCM, MEPS
3-12 Chapter 3: General Instructions
3.4 Outline dimensions
1100.84 [43.34]
386.94 [15.23]
389.82 [15.35]
316.73 [12.47]
74.71 [2.94]
148.10 [5.83]
10.90 [0.43] 87.20 [3.43]
1448.08 [57.01]
714.24 [28.12]
3.00 [0.12]
1428.48 [56.24] -Active Area
3.00 [0.12]
946.90 [37.28]
120.18 [4.73] 826.72 [32.55]
803.52 [31.63] -Active Area
863.83 [34.01]
401.76 [15.82]
11.90 [0.47]
3.00 [0.12]
400.00 [15.75]
M6*4-Depth 15
400.00 [15.75]
Wall mount Keep out area
AA-CENTER
ASUS PG65UQ Outline Dimension
*Unit:mm(inch)
3.5 Troubleshooting (FAQ)
Power LED is not ON • Press the power button to check if the
monitor is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights white and there is no
screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
HDR content is not played properly • Make sure the input source supports HDR
playback (with proper system settings and
latest software).
• Make sure the content is HDR encoded.
A corrupted half-size image is displayed
when playing 4K HDR content.
• Check the chroma settings in the image
source for correct HDR operation.
Manually adjust the related settings.
Contact the device manufacturer if the
problem persists.
3.6 Supportedoperatingmode
HDMI input
Resolution Frequency Refresh Rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
1280 x 720 60Hz
1920 x 1080 60Hz
3840 x 2160 60Hz
Note:
Do not support interlace and color gamut YUV420.
When connecting to XBOX via the HDMI port, 1080p@120Hz and 1440p@60Hz can be supported.
DisplayPort input
Resolution Frequency Refresh Rate
640 x 480 60Hz
800 x 600 60Hz
1024 x 768 60Hz
3840 x 2160 24Hz
3840 x 2160 30Hz
3840 x 2160 60Hz
3840 x 2160 82Hz
3840 x 2160 98Hz
3840 x 2160 120Hz
Note:
Do not support interlace.
G-SYNC (only for DisplayPort input) supported NVIDIA GPUs: NVIDIA Pascal GPU Graphics
Card like GTX1070, GTX1080 and GTX1080 Ti or higher. For other GPUs, please contact the
manufactures to see if they are compatible.
3840 x 2160 144Hz
Please note that Over Clocking function/performance depends on the GPUs,
contents displayed, viewing distance/angle, refresh rate and user eyes
sensitivity. ASUS only provides this function. The performance or any side effect
after activation is not guaranteed. Side effect, such as decayed contrast ratio or
waterfall is not a product defect but trade off.
