Table of Contents
- Notices
- Care & Cleaning
ASUS VG246H User Manual
Displayed below is the user manual for VG246H by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VG246 Series
LCD Monitor
User Guide
ii
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices ......................................................................................................... iii
Care & Cleaning .......................................................................................... vi
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor .............................................................. 1-2
1.4 Outline dimension ........................................................................ 1-2
1.5 Connect cables ............................................................................. 1-3
1.5.1 Rear of the LCD monitor ................................................. 1-3
1.6 Monitor introduction .................................................................... 1-4
1.6.1 Using the Controls button .............................................. 1-4
2.1 Detaching the arm/stand (for VESA wall mount) ...................... 1-6
2.2 Adjusting the monitor .................................................................. 2-1
3.1 OSD (On-Screen Display) menu ................................................. 2-2
3.1.1 Howtorecongure .......................................................... 2-2
3.1.2 OSD Function Introduction .............................................. 3-1
3.2 Specications ............................................................................. 3-10
3.3 Troubleshooting (FAQ) .............................................................. 3-11
3.4 Supported Timing List ............................................................... 3-12
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified servic er.
• Provide an earthing connection before the mains plug is connected to
the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.
v
WARNING
• Usage of other than specified head- or earphones can result in hearing
loss due to excessive sound pressures.
• Please confirm the distribution system in building installation shall
provide the circuit breaker rated 120/240V, 20A (maximum).
• If provided with a 3-pin attachment plug on the power cord, plug the
cord into a grounded (earthed) 3-pin outlet. Do not disable the power
cord grounding pin, for example, by attaching a 2-pin adapter. The
grounding pin is an important safety feature.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vii
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
1-1
ASUS LCD Monitor VG246 Series
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2 Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
Quick Start Guide
Warranty Card
1x Power Cord*
1x HDMI Cable (optional)
• If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
1. Placethedisplayatonaclothonthetable,Thenattachthebase
tothearmandxwiththescrewtojointhemtightly.Youcaneasily
tightenthescrewbyngers.
2. Adjust the monitor to the angle that is most comfortable for you.
1
2
3
-5 ~ 23
1.4 Outline dimension
Unit: mm [inch]
1-3
ASUS LCD Monitor VG246 Series
1.5 Connect cables
1.5.1 Rear of the LCD monitor
5
4
2 31
VG246H
VGA
HDMI
1. AC-IN Port
2. HDMI Port
3. VGA Port
4. Earphone - out Port
5. Kensington Lock
1-4 Chapter 1: Product Introduction
1.6 Monitor introduction
1.6.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
3
4
7
8 56
21
1. Power Indicator:
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. Power Button:
• Press this button to turn the monitor on/off.
3. MENU Button:
• Press this button to enter the OSD menu.
4. Close Button:
• Exit the OSD menu.
5. Input Select Button:
• Use this hotkey to switch from VGA, HDMI input signal.
6. GamePlus Button:
• GamePlus: The GamePlus Function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. Particularly, Crosshair function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
1-5
ASUS LCD Monitor VG246 Series
To active GamePlus:
• Press GamePlus Button to enter the GamePlus main menu.
• Activate Crosshair, Timer or FPS Counter or Display Alignment
function.
• Press the and buttons
to select and press
to confirm the
function needed. Press to go off, and exit.
GamePlus main menu GamePlus-Crosshair
GamePlus
Crosshair
(Practice Mode)
Timer FPS Counter
FPS
Display Alignment
GamePlus-Timer GamePlus-FPS Counter
Position
FPS
7. Shortcut key1 Button:
• This is a
Shortcut key. The default setting is GameVisual.
8. Shortcut key2 Button:
• This is a Shortcut key. The default setting is Blue Light Filter.
1-6 Chapter 1: Product Introduction
2.1 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor while removing the screws.
Figure 1 Figure 2
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg
(Screw size: M4 x 10 mm).
2-1
ASUS LCD Monitor VG246 Series
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling
when you change its
angle.
• Youcanadjustthemonitor’sanglefrom+23˚to-5˚anditallows62˚
swivel adjustment from either left or right. You can also adjust the
monitor’s height within +/- 15cm.
-5 ~ 23
15cm
90
90
62°
62°
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
2-2 Chapter 2: Setup
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
MOBA Mode
GameVisual
Scenery Mode
sRGB Mode
RTS/RPG Mode
FPS Mode
Cinema Mode
Racing Mode
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the button.
4. Press the and buttons to select the desired parameter.
5. Press the button to enter the slide bar and then use the or
buttons, according to the indicators on the menu, to make your
changes.
6. Select the to return to previous menu or to accept and return to
previous menu.
3-1
ASUS LCD Monitor VG246 Series
3.1.2 OSD Function Introduction
1. GameVisual
This function contains seven sub-functions that you can select for
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
MOBA Mode
GameVisual
Scenery Mode
sRGB Mode
RTS/RPG Mode
FPS Mode
Cinema Mode
Racing Mode
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
• Scenery Mode: This is the best choice for scenery photo displaying with
GameVisual™ Video Intelligence Technology.
• Racing Mode: This is the best choice for racing game playing with
GameVisual™ Video Intelligence Technology.
• Cinema Mode: This is the best choice for movie watching with
GameVisual™ Video Intelligence Technology.
• RTS/RPG Mode: This is the best choice for Real-Time Strategy(RTS)/
Role-Playing Game(RPG) playing with GameVisual™ Video Intelligence
Technology.
• FPS Mode: This is the best choice for First Person Shooter game playing
with GameVisual™ Video Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• MOBA Mode : This is the best choice for Multiplayer Online Battle
Arena (MOBA) games playing with GameVisual™ Video intelligence
Technology.
• In the Racing Mode, the Saturation, Sharpness, and ASCR functions are not
user-configurable.
• In the sRGB, the Saturation, Skin Tone, Color Temp., Sharpness, Brightness,
Contrast and ASCR functions are not user-configurable.
• In the MOBA Mode, the Saturation, Sharpness and ASCR functions are not
user-configurable.
3-2 Chapter 3: General Instruction
2. Blue Light Filter
Adjust the energy level of blue light emitted from LED backlight.
Blue Light Filter
Level 0
Level 3
Level 4
Level 2
Level 1
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
• Level 0: No change.
• Level 1~4: The higher the level,the more blue light will be reduced.
• When Blue Light Filter is activated,the default settings of Standard Mode will
be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-configurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certification. The Brightness function is not user-configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If
eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular
Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
3-3
ASUS LCD Monitor VG246 Series
3. Color
Select the image color you like from this function.
Color
Brightness
Color Temp.
Skin Tone
Saturation
Contrast
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
3-4 Chapter 3: General Instruction
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel,
ASCR, AMD FreeSync, ELMB, Shadow Boost, Position
(VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this
main function.
Image
Sharpness
VividPixel
ASCR
ELMB
AMD FreeSync
Aspect Control
Trace Free
More
Image
Shadow Boost
Position
Focus
Auto Adjust
Back
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
3-5
ASUS LCD Monitor VG246 Series
• AMD FreeSync: It can allow a AMD FreeSync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
• ELMB: Check to decrease motion blur and minimize ghosting part when
on-screen objects are fast moving. When this function is turned on, the
screen may flash slightly and the brightness will decrease.
• More: Return the next page of Image Setting.
• Back: Return the previous page of Image Setting.
• Shadow Boost: Dark color enhancement adjust monitor gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier be found.
• Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
• Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
• Auto Adjust.: Automatically adjust the image to its optimized position,
clock, and phase. (Only available for VGA input.)
• 4:3 is only available when input source is in 4:3 format.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
• ELMB can be opened on the premise that refresh rate is 75Hz and AMD
FreeSync is off.
3-6 Chapter 3: General Instruction
5. Sound
Adjust the sound settings to your preference.
Sound
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
Volume
Mute
• Volume: Adjusts the output volume level.
• Mute: Mute the output volume.
6. Input Select
Select the input source from VGA, HDMI input signal.
Input Select
VGA
HDMI
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
3-7
ASUS LCD Monitor VG246 Series
7. System Setup
Adjuststhesystemconguration.
System Setup
GameVisual Demo Mode
QuickFit
Key Lock
Information
More
Language
ECO Mode
OSD Setup
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
System Setup
Back
Power Indicator
Power Key Lock
All Reset
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246H
• GameVisual Demo Mode: Activate the demo mode for the GameVisual
function.
• QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size.
1. Grid pattern: Facilitates designers and users to organize
content and layout on one page and achieve a consistent
look and feel.
Alignment Grid 2
Alignment Grid 1
3-8 Chapter 3: General Instruction
2. Paper size: Provides users to view their documents in real
size on the screen.
B5 Letter
B5
EXIT
Letter
EXIT
3. Photo size: Provides photographers and other users to
accurately view and edit their photos in real size on the
screen.
8x10 5x7
3x5 2x2
4x6
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
• Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai, Indonesian.
• Key Lock: Disable all key functions. Pressing the second button on the
right for more than five seconds to disable key lock function.
• Information:Displays the monitor information.
• More: Return the next page of System Setting.
• Back: Return the previous page of System Setting.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-9
ASUS LCD Monitor VG246 Series
8. Shortcut
Selecting this option allows you to set two shortcut keys.
Shortcut
Shortcut 1
Shortcut 2
Racing Mode VGA 1920 x 1080 @ 60Hz
ASUS VG246
Blue Light Filter
GameVisual
Brightness
Auto Adjust
Contrast
Color Temp.
Volume
QuickFit
• Shortcut 1: User can select from “Blue Light Filter” “GameVisual”,
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,
“QuickFit”, and set as shortcut key. The default setting is
.GameVisual.
• Shortcut 2: User can select from “Blue Light Filter” “GameVisual”,
“Brightness”, “Auto Adjust”, “Contrast”, “Color Temp.”, “Volume”,
“QuickFit”, and set as shortcut key. The default setting is Blue
Light Filter.
3-10 Chapter 3: General Instruction
3.2 Specications
Model VG246H
Panel Size 23.8’’W(60.5cm)
Max. Resolution 1920x1080@75Hz
Brightness (Typ.) 250cd/m
2
Intrinsic Contrast Ratio
(Typ.) 1000:1
Viewing Angle (CR>10) 178°(H) /178°(V)
Display Colors 16.7 M
Response Time 1ms(MPRT)
Sound from HDMI Yes
HDMI input Yes
D-Sub input Yes
Audio Line-in No
Power ON Consumption
<15.08w
(Mesauring a screen brightness of 200 nits Without audio
/ USB / Card reader connection)
Note *Based on Energy Star 7.0 standard
Chassis Colors Black
Power saving mode < 0.5W
Power off mode < 0.5W
Tilt -5° ~ +23°
VESA Wall Mounting Yes (100mm x 100mm)
Phys. Dimension with
stand (WxHxD) 540.5mm x 515mm x 217.6mm
Phys. Dimension without
stand (WxHxD)
(For VESA Wall Mount)
540.5mm x 325.2mm x 51.7mm
Box Dimension (WxHxD) 723mm x 400mm x 200mm
Net Weight (Esti.) 6.06 kg
Gross Weight (Esti.) 8.07 kg
Voltage Rating AC 100~240V(Built-in)
Temperature(operation) 0℃~40℃
3-11
ASUS LCD Monitor VG246 Series
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is in the
ON mode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select “ON” to turn on power LED.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
No sound or sound is low • Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
• Make sure the audio source is correct on the OSD.
3-12 Chapter 3: General Instruction
3.4 Supported Timing List
PC Supported Primary Timing
Resolution Refresh Rate Horizontal Frequency
640x480 60Hz 31.469kHz
640x480 72Hz 37.861kHz
640x480 75Hz 37.5kHz
800x600 56Hz 35.156kHz
800x600 60Hz 37.879kHz
800x600 72Hz 48.077kHz
800x600 75Hz 46.875kHz
1024x768 60Hz 48.363kHz
1024x768 70Hz 56.476kHz
1024x768 75Hz 60.023kHz
1152x864 75Hz 67.5kHz
1280x960 60Hz 60kHz
1280x1024 60Hz 63.981kHz
1280x1024 75Hz 79.976kHz
1440x900 60Hz 55.935kHz
1680x1050 60Hz 65.29kHz
1920x1080 60Hz 67.5kHz
1920x1080 75Hz 83.894kHz
MAC Modes, Factory Preset Timing
Resolution Refresh Rate Horizontal Frequency
640x480 67Hz 35kHz
VESA Modes, User Available Timing
Resolution Refresh Rate Horizontal Frequency
1280x720(RB) 60Hz 44.444kHz
1280x720 60Hz 44.772kHz
1280x720 75Hz 56.456kHz
1680x1050(RB) 60Hz 64.674kHz
1920x1080 60Hz 66.587kHz
SD/HD Timings
HDMI1.4,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input
only)
Resolution Refresh Rate Horizontal Frequency
640 x 480 P 59.94/60Hz 31.469/31.5kHz
720 x 480 P 59.94/60Hz 31.469/31.5kHz
720 x 576 P 50Hz 31.25kHz
1280 x 720 P 50Hz 37.5kHz
1280 x 720 P 59.94/60Hz 44.955/45kHz
3-13
ASUS LCD Monitor VG246 Series
HDMI1.4,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input
only)
Resolution Refresh Rate Horizontal Frequency
1440x480P 59.94 / 60Hz 31.469 / 31.5kHz
1440x576P 50Hz 31.25kHz
1920x1080P 50Hz 56.25kHz
1920x1080P 59.94 / 60Hz 67.433 / 67.5kHz
* The modes not listed in the above tables may not be supported. For optimal resolution, we
recommend that you choose a mode listed in the above tables.