Table of Contents
ASUS VG248QE User Manual
Displayed below is the user manual for VG248QE by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VG248 series
LCD Monitor
User Guide
ii
First Edition
November 2012
Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or alered, unless
such repair, modication of alteration is authorized in writing byASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation nd to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 GamePlus Function ........................................................ 1-4
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Beforesettingupthemonitor, carefullyreadall thedocumentationthat came
withthepackage.
• Topreventreorshockhazard,neverexposethemonitortorainormoisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethe
monitormayresultinseriousphysicalinjury.
• Ifthepowersupplyisbroken,donottrytoxitbyyourself.Contactaqualied
servicetechnicianoryourretailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthe
powercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealer
immediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplace this product near or over a
radiatororheatsourceunlessproperventilationisprovided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicated
on the label. If you are not sure of the type of power supply to your home,
consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresultinre
orelectricshock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorin
anyareawhereitmaybecomewet.Placethemonitoronastablesurface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiod
oftime.Thiswillprotectthemonitorfromdamageduetopowersurges.
• Never pushobjectsorspillliquidofanykindintotheslotsonthemonitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240VAC.
• Ifyou encountertechnical problemswiththe monitor,contact aqualified
servicetechnicianoryourretailer.
• Adjustment of the volume control as well as the equalizer to other settings
thanthecenterpositionmayincreasetheear-/headphonesoutputvoltageand
thereforethesoundpressurelevel.
Thissymbolofthecrossedoutwheeledbinindicatesthattheproduct(electrical,
electronicequipment,andmercury-containingbuttoncellbattery)shouldnot
beplacedinmunicipalwaste.Pleasechecklocalregulationsfordisposalof
electronicproducts.
AEEE yönetmeliğine uygundur
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• The screen may icker during the initial use due to the nature of the uorescent
light. Turn off the Power Switch and turn it on again to make sure that the
icker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1-1ASUS VG248QE Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and
brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power cord
DVI (Dual-Link) cable
Audio cable
If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1 2 643 5
1. button:
• Selects a desired preset mode.
• Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
2. button:
• Decreases values or moves your selection left/down.
• GamePlus hotkey. Press to select and MENU to confirm the function
needed.
3. MENU button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
4. button:
• Increases values or moves your selection right/up.
• Brightness hotkey
5. button:
• Selects an available input source.
Press (Input Select button) to display DVI/HDMI/DisplayPort signals after
you connect DVI/HDMI/DisplayPort cable with the monitor.
1-3ASUS VG248QE Series LCD Monitor
6. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Blue ON
Amber Standby mode
OFF OFF
64
1. This port connects the power cord.
2. This port is for connection for a DisplayPort compatible device.
3. This 24-pin port is for PC (Personal Computer) DVI-
digital signal connection.
4. This port is for connection with an HDMI compatible device.
Only DisplayPort and DVI ports support 3D feature given NVIDIA 3D
Vision Kit is available.
5. This port connects PC audio source by the bundled audio
cable.
6. This port is only available when an HDMI/DisplayPort cable
is connected.
1-4 Chapter 1: Product introduction
The GamePlus Function provides a toolkit and creates a better gaming environment for
users when playing different types of games. In addition, Aimpoint function is specially
designed for new gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:
1. Press the GamePlus hotkey.
2. Press to select between Aimpoint and Timer function.
3. Press MENU to confirm the function you choose, and to go back, off, and exit.
GamePlus Main Menu GamePlus — Aimpoint
GamePlus — Timer GamePlus — Timer — Position
2-1ASUS VG248QE Series LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Rotate the arm anti-clockwise 90 degrees. (Figure 1)
3. Fix the base to the arm by fastening the bundled screw. (Figure 2) (Figure 3)
4. Align the arrow mark on the base with the two screws to allow 90 degrees swivel
from either left or right.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +15˚ to -5˚ (for tilt)/+45˚ to -45˚ (for
swiveling/ +110 mm (for height adjustment)/90˚ (for portrait view).
It is normal that the monitor slightly shakes while you adjust the viewing angle.
Figure 1 Figure 2 Figure 3
2-2 Chapter 2: Setup
2.3 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Loosen the four screws on the back of the monitor and remove the arm/base.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2.4 Connecting the cables
Connect the cables as the following instructions:
HDMI
DVIAC-IN
Displayport Earphone jack
Audio-in
2-3ASUS VG248QE Series LCD Monitor
: connect one end of the power cord securely to
the monitor’s AC input, the other end to a power outlet.
:
a. Plug one end of the DVI/HDMI/DisplayPort cable to the monitor’s DVI/
HDMI/DisplayPort port.
b. Connect the other end of the DVI/HDMI/DisplayPort cable to your
computer's DVI/HDMI/DisplayPort port.
c. Tighten the two screws to secure the DVI connector.
connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
: connect the end with plug type to the monitor’s earphone jack.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in blue to show that the monitor is ON.
2-4 Chapter 2: Setup
3-1ASUS VG248QE Series LCD Monitor
3.1 OSD (On-Screen Display) menu
1. Press the MENU button to activate
the OSD menu.
2. Press and to
navigate through the functions.
Highlight the desired function and
press the MENU button to activate
it. If the function selected has a sub-menu, press and again
to navigate through the sub-menu functions. Highlight the desired sub-menu
function and press the MENU button to activate it.
3. Press and to change the settings of the selected function.
4. To exit and save the OSD menu, press the button repeatedly until the OSD
menu disappears. To adjust other functions, repeat steps 1-3.
This function contains six sub-
functions you can select for your
preference. Each mode has the
Reset selection allowing you to
maintain your setting or return to
the preset mode.
: best choice for scenery photo display with SPLENDID™
Video Enhancement.
: best choice for document editing with SPLENDID™
Video Enhancement.
: best choice for movies with SPLENDID™ Video
Enhancement.
: best choice for games playing with SPLENDID™ Video
Enhancement.
: best choice for dark-scene games or movies with
SPLENDID™ Video Enhancement.
: best choice for viewing photos and graphics from PCs.
In the Standard Mode, the ASCR, Saturation and Sharpness functions are
not user-configurable.
3-2 Chapter 3: General Instructions
You can adjust Brightness,
Contrast, Saturation, Color Temp.,
Skin Tone, and Smart View from
this menu.
: the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
: the adjusting range is from 0 to 100.
: the adjusting range is from 0 to 100.
: contains four modes including Cool, Normal, Warm, and
User Mode.
: contains three color modes including Reddish, Natural, and
Yellowish.
: provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
You can adjust Sharpness, Trace
Free, Aspect Control and ASCR,
from this menu.
: the adjusting
range is from 0 to 100.
: adjusts the
response time of the monitor.
: adjusts the
aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
: turns on or off the ASCR (ASUS Smart Contrast Ratio) function.
(Only available at Mode, Mode, Mode, and
Mode.)
3-3ASUS VG248QE Series LCD Monitor
In this function, you can select your
desired input source.
Allows you to adjust the system.
:
splits the screen into two for
Splendid modes comparison.
: the adjusting range
is from 0 to 100.
: reduces power
consumption.
:
* Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD from 0 to 100.
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
: shows the monitor information.
: there are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplied Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.
: “Yes” allows you to restore the default settings.
3-4 Chapter 3: General Instructions
3.2 Specications summary
TFT LCD
24”W (16:9, 60.97 cm) wide screen
1920 x 1080
0.270 mm
350 cd/m2
1000:1
80,000,000:1 (with ASCR on)
170˚/160˚
16.7 M
1 ms
Yes
6 video preset modes (by hotkey)
4 color temperatures
3 skin-tones
HDMI v1.4 x 1, DisplayPort v1.2 x 1, DVI (Dual-
Link) x 1
3.5 mm Mini-jack
Yes
Black
2 W x 2 Stereo, RMS
Blue (On)/Amber (Standby)
+15˚~ -5˚
100 x 100 mm
Yes
AC: 100~240V
Power On: < 45 W, Standby: < 0.5 W,
Power Off: < 0.5 W
0˚C~40˚C
-20˚C~+60˚C
569.4 mm x 499.9 mm x 231.0 mm (machine)
674 mm x 413 mm x 221 mm (package)
5.5 kg (Net); 8.1 kg (Gross)
21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatia, Polish, Romanian, Hungarian,
Turkey, Simplied Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesia, Persian)
DVI (Dual-Link) cable, audio cable, power cord,
Quick start guide, warranty card
3-5ASUS VG248QE Series LCD Monitor
Regulation approvals CB, CE, Gost-R, CCC, UL/cUL, FCC, C-Tick,
BSMI, VCCI, RoHS, WEEE, Hygenic, J-MOSS,
ErP, PSE, UKrSEPRO, Windows 7 WHQL,
Windows 8 WHQL
*Specifications are subject to change without notice.
3-6 Chapter 3: General Instructions
3.3 Troubleshooting (FAQ)
Power LED is not ON • Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights amber and there is
no screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image is not centered or sized
properly
• Adjust the H-Position or V-Position
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
Screen image is blurry or fuzzy • Adjust the Phase and Clock settings via
OSD.
No sound or sound is low • Ensure that the HDMI cable is properly
connected to the monitor and the
computer.
• Adjust the volume settings of both your
monitor and HDMI device.
• Ensure that the computer sound card
driver is properly installed and activated.
3-7ASUS VG248QE Series LCD Monitor
3.4 Supported operating modes
640x350 70Hz 31.469KHz
640x350 85Hz 37.861KHz
640x480 60Hz 31.469KHz
640x480 67Hz 35KHz
640x480 75Hz 37.5KHz
640x480 85Hz 43.269KHz
720x400 70Hz 31.469KHz
720x400 85Hz 37.927KHz
800x600 56Hz 35.156KHz
800x600 60Hz 37.897KHz
800x600 72Hz 48.077KHz
800x600 75Hz 46.875KHz
800x600 85Hz 53.674KHz
832x624 75Hz 49.725KHz
848x480 60Hz 31.02KHz
1024x768 60Hz 48.363KHz
1024x768 70Hz 56.476KHz
1024x768 75Hz 60.023KHz
1024x768 85Hz 68.677KHz
1152x864 75Hz 67.5KHz
1280x720 60Hz 44.444KHz
1280x720 60Hz 44.772KHz
1280x720 75Hz 56.456KHz
1280x768 60Hz 47.396KHz
1280x800 60Hz 49.306KHz
1280x800 60Hz 49.702KHz
1280x800 75Hz 62.795KHz
1280x960 60Hz 60KHz
1280x1024 60Hz 63.981KHz
1280x1024 75Hz 79.976KHz
1366x768 60Hz 47.712KHz
1440x900 60Hz 55.469KHz
1440x900 60Hz 55.935KHz
1440x900 75Hz 70.635KHz
1680x1050 60Hz 64.674KHz
1680x1050 60Hz 65.29KHz
1920x1080 60Hz 66.587KHz
1920x1080 60Hz 67.5KHz
3-8 Chapter 3: General Instructions
1920x1080* (DVI/DP) 85Hz 95.43KHz (2D)
1920x1080* (DVI/DP) 144Hz 158.11KHz (2D)
1920x1080* (DVI/DP) 100Hz 113.3KHz (2D)/113.8KHz (3D)
1920x1080* (DVIDP) 120Hz 137.2KHz (2D/3D)
640x480P (HDMI) 59.94/60Hz 31.469KHz/31.5KHz
720x480P (HDMI) 59.94/60Hz 31.469KHz/31.5KHz
720x576P (HDMI) 50Hz 31.25KHz
1280x720P (HDMI) 50Hz 37.5KHz
1280x720P (HDMI) 59.94/60Hz 44.955KHz/45KHz
1440x480P (HDMI) 59.94/60Hz 31.469KHz/31.5KHz
1440x576P (HDMI) 50Hz 31.25KHz
1920x1080i (HDMI) 50Hz 28.125KHz
1920x1080i (HDMI) 59.94/60Hz 33.716KHz/33.75KHz
1920x1080P (HDMI) 50Hz 56.25KHz
1920x1080P (HDMI) 59.94/60Hz 67.433KHz/67.5KHz