Table of Contents
ASUS VN279QL User Manual
Displayed below is the user manual for VN279QL by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VN279 series
LCD Monitor
User Guide
ii
Second Edition
July 2013
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or alered, unless
such repair, modication of alteration is authorized in writing byASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation nd to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 QuickFit Function ............................................................ 1-4
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Beforesettingupthemonitor, carefullyreadall thedocumentationthat came
withthepackage.
• Topreventreorshockhazard,neverexposethemonitortorainormoisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethe
monitormayresultinseriousphysicalinjury.
• Ifthepowersupplyisbroken,donottrytoxitbyyourself.Contactaqualied
servicetechnicianoryourretailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthe
powercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealer
immediately.
• Slots andopeningsonthebackortopofthecabinetareprovidedfor
ventilation.Donotblocktheseslots.Neverplace this product near or over a
radiatororheatsourceunlessproperventilationisprovided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicated
on the label. If you are not sure of the type of power supply to your home,
consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresultinre
orelectricshock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorin
anyareawhereitmaybecomewet.Placethemonitoronastablesurface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedforalongperiod
oftime.Thiswillprotectthemonitorfromdamageduetopowersurges.
• Never pushobjectsorspillliquidofanykindintotheslotsonthemonitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240VAC.
• If youencountertechnicalproblemswith themonitor, contactaqualified
servicetechnicianoryourretailer.
• Adjustment of the volume control as well as the equalizer to other settings
thanthecenterpositionmayincreasetheear-/headphonesoutputvoltageand
thereforethesoundpressurelevel.
Thissymbolofthecrossedoutwheeledbinindicatesthattheproduct(electrical,
electronicequipment,andmercury-containingbuttoncellbattery)shouldnot
beplacedinmunicipalwaste.Pleasechecklocalregulationsfordisposalof
electronicproducts.
AEEE yönetmeliğine uygundur
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• The screen may icker during the initial use due to the nature of the uorescent
light. Turn off the Power Switch and turn it on again to make sure that the
icker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
Congratulations!
This product is TCO Certified for Sustainable IT
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers)
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
For more information, please visit
www.tcodevelopment.com
1-1ASUS VN279 Series LCD Monitor
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Packagecontents
Check your package for the following items:
LCD monitor
Monitor Base
Quick start guide
Warranty card
Power cord
VGA cable
MHL cable (optional)
HDMI cable (optional)
HDMI-DVI cable (optional)
DisplayPort cable (optional)
USB 3.0 cable (optional)
Audio cable
If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1 2 6 743 5
1. QuickFit Button:
• Activates the QuickFit function designed for alignment.
• The QuickFit function contains 7 pages of common grid patterns, paper
sizes, and photo sizes.
2. Button:
• Use this hotkey to switch from six video preset modes (Scenery, Standard,
Theater, Game, Night View, and sRGB Mode) with SPLENDID™ Video
Intelligence Technology
• Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
• Automatically adjusts the image to its optimized position, clock, and phase
by pressing this Button for 2-4 seconds (for VGA mode only).
3. Button:
• Decreases values or moves your selection left/down.
• Volume hotkey.
4. MENU Button:
• Turns on the OSD menu.
• Enacts the selected OSD menu item.
1-3ASUS VN279 Series LCD Monitor
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
5. Button:
• Increases values or moves your selection right/up.
• Brightness hotkey.
6. Input Select Button:
• Selects an available input source.
Press Button (Input Select Button) to display VGA, HDMI/MHL,
DisplayPort signals after you connect VGA, HDMI/MHL, or DisplayPort
cable with the monitor.
7. Power Button/Power Indicator
• Turns the monitor ON/OFF.
• The color denition of the power indicator is as the below table.
White ON
Amber Standby mode
Off OFF
6 7 8 9
VN279QL
VN279QLB
10
. This port connects the power cord.
. This port is for connection with a USB upstream cable.
The connection enables the USB ports on the monitor.
. These ports are for connection with USB devices,
such as USB keyboard/mouse, USB ash drive, etc..
. This port is for connection for a DisplayPort compatible device.
. This port is for connection with an HDMI/MHL compatible
device.
1-4 Chapter 1: Product introduction
. This 15-pin port is for PC VGA connection.
This port connects PC audio source by the bundled audio
cable.
. This port is only available when an HDMI/DisplayPort cable
is connected.
.
The QuickFit function contains three kinds of patterns: (1) Grid patterns (2) Paper
size (3) Photo size. To activate the patterns, press the QuickFit hotkey. Press the
Button again until a desired pattern is selected.
1. Grid patterns
The grid patterns facilitate designers and users to organize content and layout on a
page and achieve a consistent look and feel.
Alignment Grid
2. Paper size
QuickFit provides numerous commonly used standard paper sizes for users to view
their documents in real size on the screen.
A4 Letter
1-5ASUS VN279 Series LCD Monitor
3. Photo size
The various real photo sizes displayed in the QuickFit function provides
photographers and other users to accurately view and edit their photos in real size
on the screen.
Photo 4x6, 3x5, 2x2 Photo 8x10, 5x7
When QuickFit is activated, press the control Buttons to make adjustments. The
QuickFit OSD displayed in the lower right corner of the screen will guide users to
make selections.
The QuickFit OSD shown on the screen is not accessible by tapping on it.
1-6 Chapter 1: Product introduction
2-1ASUS VN279 Series LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Rotate the arm anti-clockwise 90 degrees. (Figure 1)
3. Fix the base to the arm by fastening the bundled screw. (Figure 2) (Figure 3)
4. Align the triangle mark on the base with the two screws to allow 160 degrees
swivel from either left or right. (Figure 4)
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
160˚
160˚
0˚
Figure 1 Figure 2
Figure 3 Figure 4
2-2 Chapter 2: Setup
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +22˚ to -5˚ (for tilt)/+160˚ to -160˚ (for
swiveling/ +110 mm (for height adjustment)/90˚ (for portrait view).
+22˚~-5˚
160˚ 160˚
0˚
1. Lift the monitor to the highest position.
2 Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise to the angle you need.
+22˚~-5˚
It is normal that the monitor slightly shakes while you adjust the viewing angle.
(Tilt) (Swivel) (Height adjustment)
2-3ASUS VN279 Series LCD Monitor
2.3 Detaching the arm/base
(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Use a screwdriver to remove the four screws on the arm (Figure 1), and then
detach the arm/base from the monitor (Figure 2).
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand while removing the screws.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
Figure 1 Figure 2
2-4 Chapter 2: Setup
2.4 Using the connector cover
:
a. Pull the connector cover downwards.
b. Lift the connector cover form its center.
1
1
2
:
a. Insert the 2 tabs on both sides of the cover into the monitor.
b. Push the connector cover up to its original position.
2.5 Connecting the cables
1. Connect the cables as the following instructions:
VN279QL
VN279QLB
USB DP
USB
VGA
HDMI
Earphone jack
Audio-in
: connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
:
a. Plug one end of the VGA/HDMI (MHL)/DisplayPort cable to the
monitor’s VGA/HDMI (MHL)/DisplayPort jack.
b. Connect the other end of the VGA/HDMI (MHL)/DisplayPort cable to
your computer or mobile device's VGA/HDMI (MHL)/DisplayPort jack.
2-5ASUS VN279 Series LCD Monitor
c. Tighten the two screws to secure the VGA connector.
:connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
: Take the supplied USB 3.0 cable, and plug the
smaller end (type B) of the USB upstream cable to the monitor’s USB upstream
port, and the larger end (type A) to your computer’s USB 3.0 port. Make sure
your computer is installed with the lastest Windows 7/Windows 8 operating
system. That will enable the USB ports on the monitor to work.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2.6 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2-6 Chapter 2: Setup
3-1ASUS VN279 Series LCD Monitor
3.1 OSD(On-ScreenDisplay)menu
3.1.1 Howtoreconfigure
1. Press the MENU Button to activate
the OSD menu.
2. Press and to
navigate through the functions.
Highlight the desired function and
press the MENU Button to activate
it. If the function selected has a sub-menu, press and again
to navigate through the sub-menu functions. Highlight the desired sub-menu
function and press the MENU Button to activate it.
3. Press and to change the settings of the selected function.
4. To exit and save the OSD menu, press the Button repeatedly until
the OSD menu disappears. To adjust other functions, repeat steps 1-3.
3.1.2 OSDfunctionintroduction
1. Splendid
This function contains six sub-
functions you can select for your
preference. Each mode has the
Reset selection allowing you to
maintain your setting or return to
the preset mode.
• SceneryMode: best choice for scenery photo display with SPLENDID™
Video Enhancement.
• StandardMode: best choice for document editing with SPLENDID™
Video Enhancement.
• TheaterMode: best choice for movies with SPLENDID™ Video
Enhancement.
• GameMode: best choice for games playing with SPLENDID™ Video
Enhancement.
• NightViewMode: best choice for dark-scene games or movies with
SPLENDID™ Video Enhancement.
• sRGBMode: best choice for viewing photos and graphics from PCs.
• In the Standard Mode, the ASCR, Saturation ,Sharpness functions
and Skin Tone are not user-configurable.
• In the sRGB Mode, the Saturation, Color Temp., Skin Tone,
Sharpness, Brightness, Contrast and ASCR functions are not user-
congurable.
3-2 Chapter 3: General Instructions
You can adjust Brightness,
Contrast, Saturation, Color Temp.,
and Skin Tone from this menu.
: the adjusting
range is from 0 to 100.
is a hotkey to activate
this function.
: the adjusting range is from 0 to 100.
: the adjusting range is from 0 to 100.
: contains four modes including Cool, Normal, Warm, and
User Mode.
: contains three color modes including Reddish, Natural, and
Yellowish.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
You can adjust Sharpness, Trace
Free, Aspect Control, VividPixel,
ASCR, Position (VGA only) and
Focus (VGA only), from this
menu.
: the adjusting
range is from 0 to 100.
: adjusts the
response time of the monitor.
: adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
: enhances the outline of the displayed picture and generates
high-quality images on screen.
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
: adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
3-3ASUS VN279 Series LCD Monitor
: reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows
vertical stripes and the image is not proportional.
In this function, you can select
your desired input source.
The GamePlus Function provides
a toolkit and creates a better
gaming environment for users
when playing different types of
games. In addition, Aimpoint
function is specially designed
for new gamers or beginners
interested in First Person Shooter
(FPS) games.
Press and to select between Aimpoint and Timer
function.
Press MENU to confirm the function you choose, and to go back, off,
and exit.
3-4 Chapter 3: General Instructions
GamePlus Main Menu GamePlus — Aimpoint
GamePlus — Timer GamePlus — Timer — Position
Allows you to adjust the system.
:
splits the screen into two for
Splendid modes comparison.
: the adjusting range
is from 0 to 100.
: reduces power
consumption.
:
* Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD from 0 to 100.
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
: enables the key lock function. A long press for 5 seconds on
the MENU Button to disable the key lock function.
: shows the monitor information.
: there are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatia, Polish, Romanian, Hungarian, Turkey, Simplied Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.
: “Yes” allows you to restore the default settings.
3-5ASUS VN279 Series LCD Monitor
3.2 Specications summary (VN279QLB)
TFT LCD
27”W (16:9, 68.6 cm) wide screen
1920 x 1080
0.311 mm
300 cd/m2
3000:1
100,000,000:1 (with ASCR on)
178˚/178˚
16.7 M
5 ms (Gray to gray)
Yes
6 video preset modes (by hotkey)
Yes
4 color temperatures
D-sub
HDMI v1.4 (MHL), DisplayPort v1.2
Upstream x 1, Downstream x 2
Yes
Black
2 W x 2 Stereo, RMS
White (On)/Amber (Standby)
+22˚~ -5˚
+160˚~-160˚
110 mm
Yes
AC: 100~240V
Power On: < 35 W (Typical)*, Standby: < 0.5 W
(Typical), Power Off: < 0.3 W (Switch off)
0˚C~40˚C
-20˚C~+60˚C
619.2 mm x 526 mm x 225.2 mm (machine)
715 mm x 449 mm x 200 mm (package)
6.1 kg (Net); 8.3 kg (Gross)
21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatia, Polish, Romanian, Hungarian,
Turkey, Simplied Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesia, Persian)
3-6 Chapter 3: General Instructions
Accessories VGA cable, MHL cable (optional), HDMI-
DVI cable (optional), HDMI cable (optional) ,
DisplayPort cable (optional), Audio cable, Power
cord, USB 3.0 cable, Quick start guide, Warranty
card
Regulation approvals China Energy Level 1, UL/cUL, CB, CE, ErP,
FCC (Class B), CCC, BSMI, CU, C-Tick, VCCI,
UkrSEPRO, TCO 7.0, TUV-GS, ISO 9241-
307, J-MOSS, RoHS, WEEE, PSE, WHQL for
Windows 7 and Windows 8
*Without audio and USB hub connection.
**Specifications are subject to change without notice.
3-7ASUS VN279 Series LCD Monitor
3.2 Specicationssummary(VN279QL)
Panel Type TFT LCD
Panel size 27”W (16:9, 68.6 cm) wide screen
Max. Resolution 1920 x 1080
Pixel pitch 0.311 mm
Brightness (Typical) 300 cd/m2
Contrast Ratio (Typical) 3000:1
Contrast Ratio (Max.) 100,000,000:1 (with ASCR on)
Viewing angle(H/V) CR>10 178˚/178˚
Display colors 16.7 M
Response time 5 ms (Gray to gray)
SPLENDID™ Video Enhancement Yes
SPLENDID™ selection 6 video preset modes (by hotkey)
Auto adjustment Yes
Color temperature selection 4 color temperatures
Analog input D-sub
Digital input HDMI v1.4 (MHL), DisplayPort v1.2
Earphone jack Yes
Colors Black
Speaker (Built-in) 2 W x 2 Stereo, RMS
Power LED White (On)/Amber (Standby)
Tilt +22˚~ -5˚
Swivel +160˚~-160˚
Height Adjustment 110 mm
Kensington lock Yes
Voltage rating AC: 100~240V
Power consumption Power On: < 35 W (Typical)*, Standby: < 0.5 W
(Typical), Power Off: < 0.3 W (Switch off)
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimensions (W x H x D) 619.2 mm x 526 mm x 225.2 mm (machine)
715 mm x 449 mm x 200 mm (package)
Weight (Esti.) 6.1 kg (Net); 8.3 kg (Gross)
Multi-languages 21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatia, Polish, Romanian, Hungarian,
Turkey, Simplied Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesia, Persian)
Accessories VGA cable, MHL cable (optional), HDMI-
DVI cable (optional), HDMI cable (optional) ,
DisplayPort cable (optional), Audio cable, Power
cord, Quick start guide, Warranty card
3-8 Chapter 3: General Instructions
Regulation approvals China Energy Level 1, UL/cUL, CB, CE, ErP,
FCC (Class B), CCC, BSMI, CU, C-Tick, VCCI,
UkrSEPRO, TCO 7.0, TUV-GS, ISO 9241-
307, J-MOSS, RoHS, WEEE, PSE, WHQL for
Windows 7 and Windows 8
*Without audio and USB hub connection.
**Specifications are subject to change without notice.
3-9ASUS VN279 Series LCD Monitor
3.3 Troubleshooting (FAQ)
Power LED is not ON • Press the Button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights amber and there is
no screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image is not centered or sized
properly
• Press the Button for 2-4 seconds
to automatically adjust the image (for VGA
mode only).
• Adjust the H-Position or V-Position
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
Screen image is blurry or fuzzy • Press the Button for 2-4 seconds
to automatically adjust the image (for VGA
mode only).
• Adjust the Phase and Clock settings via
OSD.
No sound or sound is low • Ensure that the HDMI cable is properly
connected to the monitor and the
computer.
• Adjust the volume settings of both your
monitor and HDMI device.
• Ensure that the computer sound card
driver is properly installed and activated.
3-10 Chapter 3: General Instructions
3.4 Supported operating modes
640x480 31.5 60 25.18
640x480 35.0 67 30.24
640x480 37.9 72 31.50
640x480 37.5 75 31.50
720x400 31.5 70 28.32
800x600 35.16 56 36.00
800x600 37.9 60 40.00
800x600 48.1 72 66.75
800x600 46.9 75 49.50
832x624 49.7 75 57.28
1024x768 48.4 60 65.00
1024x768 56.5 70 75.00
1024x768 60.0 75 78.50
1152x864 67.5 75 108.00
1280x720 45 60 75.25
1280x768 47.78 60 79.50
1280x800 49.7 60 83.50
1280x960 60.0 60 108.00
1280x1024 63.4 60 108.00
1280x1024 79.97 75 135.00
1360x768 47.71 60 85.50
1366x768 47.71 60 85.50
1440x900 55.94 60 106.50
1600x1200 75.0 60 162.00
1680x1050 65.3 60 146.25
1920x1080
(Primary) 67.5 60 148.50