Table of Contents
ASUS VP299CL User Manual
Displayed below is the user manual for VP299CL by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VP299CL Series
LCD Monitor
User Guide
ii
Copyright © 2021 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
Table of contents
Notices ......................................................................................................... iii
Safety information ....................................................................................... v
Care & Cleaning ......................................................................................... vii
1.1 Welcome ....................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Assembling the monitor .............................................................. 1-2
1.4 Connect cables ............................................................................. 1-3
1.4.1 Rear of the LCD monitor ................................................. 1-3
1.5 Monitor introduction .................................................................... 1-4
1.5.1 Using the Controls button .............................................. 1-4
2.1 Detaching the arm/stand (for VESA wall mount) ............ 2-1
2.2 Adjusting the monitor .................................................................. 2-2
2.3 Outline dimension ........................................................................ 2-3
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 Howtorecongure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-2
3.2 Specications ............................................................................. 3-14
3.3 Troubleshooting (FAQ) .............................................................. 3-15
3.4 Supported Timing List ............................................................... 3-16
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE:ThismonitorisENERGYSTARcertied.
ThisproductqualiesforENERGYSTARinthefactory
default setting which can be restored by “Factory Reset”
function in the OSD menu. Changing the factory
default settings or enabling other features may increase
powerconsumptionthatcouldexceedtheENERGYSTAR
speciedlimits.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Declaration of Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with
the harmonized standards for Information Technology Equipment, these
harmonizedstandardspublishedunderDirectivesofOfcialJournalofthe
European Union.
WEEE Symbol Statement
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human health and
the environment. For more information about where you can drop off your
wasteequipmentforrecycling,pleasecontactyourlocalcityofce,your
household waste disposal service or the shop where you purchased the
product.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation.Donotblocktheseslots.Neverplacethisproductnearor
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Neverpushobjectsorspillliquidofanykindintotheslotsonthe
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100 ~ 240V AC.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible
• If you encounter technical problems with the monitor, contact a
qualified servic er.
• Provide an earthing connection before the mains plug is connected to
the mains. And, when disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug from the mains.
vi
WARNING
Usageofotherthanspeciedhead-orearphonescanresultinhearing
loss due to excessive sound pressures.
Pleaseconrmthedistributionsysteminbuildinginstallationshallprovide
the circuit breaker rated 120/240V, 20A (maximum).
If provided with a 3-pin attachment plug on the power cord, plug the cord
into a grounded (earthed) 3-pin outlet. Do not disable the power cord
grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
Stability Hazard.
The product may fall, causing serious personal injury or death. To
preventinjury,thisproductmustbesecurelyattachedtotheoor/wallin
accordance with the installation instructions.
A product may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions such
as:
ALWAYSusecabinetsorstandsorinstallationmethodsrecommendedby
the manufacturer of the product set.
ALWAYSusefurniturethatcansafelysupporttheproduct.
ALWAYSensuretheproductisnotoverhangingtheedgeofthesupporting
furniture.
ALWAYSeducatechildrenaboutthedangersofclimbingonfurnitureto
reach the product or its controls.
ALWAYSroutecordsandcablesconnectedtoyourproductsotheycannot
be tripped over, pulled or grabbed.
NEVERplaceaproductinanunstablelocation.
NEVERplacetheproductontallfurniture(forexample,cupboardsor
bookcases) without anchoring both the furniture and the product to a
suitable support.
NEVERplacetheproductonclothorothermaterialsthatmaybelocated
between the product and supporting furniture.
NEVERplaceitemsthatmighttemptchildrentoclimb,suchastoysand
remote controls, on the top of the product or furniture on which the product
is placed.
If the existing product is going to be retained and relocated, the same
considerations as above should be applied.
vii
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intendedforusewiththeLCD.Neverspraycleanerdirectlyonthe
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingon
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentryingto
complete a task.
CAUTION:Informationtopreventdamagetothecomponents
when trying to complete a task.
IMPORTANT:InformationthatyouMUSTfollowtocompletea
task.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.
viii
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Yourproductpackagemayincludeoptionaldocumentationthatmay
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
Product information fro EU energy label
QR CODE
1-1
ASUS LCD Monitor VP299 Series
1.1 Welcome
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings you!
1.2 Package contents
Check your package for the following items:
LCD Monitor
Monitor Base
QuickStartGuide
Warranty Card
1x Power Cord
1x HDMI Cable
1x DP Cable (optional)
1x USB C Cable (optional)
• If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor
1. Place the display on a cloth on the table, Use a screwdriver to tighten
the assembly screws,and secure the arm to the display tightly.Then
attachthebasetothearmandxwiththescrewtojointhemtightly.
Youcaneasilytightenthescrewbyngers.
2. Adjust the monitor to the angle that is most comfortable for you.
-5 ~ 23
2
1
3
1-3
ASUS LCD Monitor VP299 Series
1.4 Connect cables
1.4.1 Rear of the LCD monitor
6
3 4
25
1
HDMI 15W
1. AC-INPort
2. HDMI Port
3. DisplayPort
4. Type-C Port
5. Audio - out Port
6. Kensington Lock
1-4 Chapter 1: Product Introduction
1.5 Monitor introduction
1.5.1 Using the Controls button
Use the control button on the back of the monitor to adjust the image
settings.
Power
Close
Menu
Input Select
1. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
2. (5-way) Button:
• Press this button to turn on the OSD menu.
• Turns on the start menu. Execute the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right
3. Input Select Button:
• This is a hotkey. The default setting is Input Select. Use Input Select
hotkey to switch from “HDMI”, “DisplayPort” or “USB Type-C”.
2-1
ASUS LCD Monitor VP299 Series
2.1 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use a screwdriver to remove the four screw on the arm and then
detach the arm/stand from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor while removing the screws.
2-2 Chapter 2: Setup
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling
when you change its
angle.
• Youcanadjustthemonitor’sanglefrom+23˚to-5˚.anditallows180˚
swiveladjustmentfromeitherleftorright.Youcanalsoadjustthe
monitor’sheightwithin+/-130cm.
130mm
+/-180°
-5 ~ 23
It is normal that the monitor slightly shakes while you adjust the viewing
angle.
2-3
ASUS LCD Monitor VP299 Series
2.3 Outline dimension
Unit: mm
689,77
[27,156]
315,17
[12,408]
283,82
[11,174]
672,77
[26,487]
187,05
[7,364]
158,88
[6,255]
2,08
[0,082]
10,50
[0,413]
13,00
[0,512]
58,03
[2,285]
21,55
[0,848]
15,04
[0,592]
323,54
[12,738]
225,00
[8,858]
[7,714]
216,23
[8,513]
223,65
[8,805]
VESA Screw 4PCS (M4xL10)
3-1
ASUS LCD Monitor VP299 Series
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
Reading Mode
Darkroom Mode
Splendid
Scenery Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Standard Mode
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
1. PresstheMENUbuttontoactivatetheOSDmenu.
2. Press the and buttons to toggle between options in the
Menu. As you move from one icon to another, the option name is
highlighted.
3. To select the highlighted item on the menu press the Center key.
4. Press the and buttons to select the desired parameter.
5. Press the Center key to enter the slide bar and then use the or
buttons, according to the indicators on the menu, to make your
changes.
6. Press the ◄/► to move left / right menu.
3-2 Chapter 3: General Instruction
3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for
your preference. Each mode has the Reset selection, allowing you to
maintain your setting or return to the preset mode.
Reading Mode
Darkroom Mode
Splendid
Scenery Mode
sRGB Mode
Game Mode
Night View Mode
Theater Mode
Standard Mode
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
• Standard Mode: This is the best choice for document editing with
SPLENDID™ Video Intelligence Technology.
• sRGB Mode: This is the best choice for viewing photos and graphics
from PCs.
• Scenery Mode: This is the best choice for scenery photo displaying with
SPLENDID™ Video Intelligence Technology.
• Theater Mode: This is the best choice for movie watching with
SPLENDID™ Video Intelligence Technology.
• Game Mode: This is the best choice for game playing with SPLENDID™
Video Intelligence Technology.
• Night View Mode: This is the best choice for playing dark-scene game
or watching dark-scene movie with SPLENDID™ Video Intelligence
Technology.
• Reading Mode : This is the best choice for book reading.
• Darkroom Mode : This is the best choice for a weak ambient light
environmen.
• In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR
functions are not user-configurable.
• InthesRGB,theSaturation,ColorTemp.,SkinTone,Sharpness,Brightness,
Contrast and ASCR functions are not user-configurable.
• In the Reading Mode, the Saturation, SkinTone, ASCR, contrast, and Color
Temp functions are not user-configurable.
3-3
ASUS LCD Monitor VP299 Series
2. EyeCare
EyeCare
Color Augmentation
Rest Reminder
EyeCheck
Blue Light Filter
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
• Blue Light Filter: In this function, you can adjust the blue light filter from
0 to max. 0: no changes；Max: The higher the level, the less blue light
is scattered. When blue light filter is activated, the default settings of
Standard Mode will be automatically imported. Besides maximum level,
the brightness is user-configurable. Maximum is the optimized setting.
It is compliance with TUV low blue light certification*. The brightness
function is not user configurable.
• When the user adjusts blue light filter bar to maximum level.
• *When color augmentation is in default value (50).
• Rest Reminder: This function provides you a rest reminder according
to how long you set for your working time. For example, a user sets 60
minutes working time and there will be a pop up reminder appeared on
the upper left corner of the monitor for 5 seconds. Press any key to make
this reminder OSD disappeared.
• When this function is enable, the following functions are not available:
SplendidDemoMode,GamePlusandQuickFit.
• Color Augmentation: The adjusting range of color enhancement is from
0 to 100.
• ThisfunctionisnotavailableinsRGBmodeunderSplendid.
• ThisfunctionisnotavailablewhenReddishorYellowishisselectedinthe
Skin Tone menu.
3-4 Chapter 3: General Instruction
• EyeCheck: The EyeCheck function contains three patterns: (1) Snellen
Chart(2)AmslerGrid(3)Astigmatism.
1. Snellen Chart
P1 P3
L11
L10
L9
L8
L7
P2
L6
L5
L4
L3
L2
L1
2. AmslerGrid
While focusing at the center point, check that all the lines are
straight.
3. Astigmatism
Check that each line is of the same width.
3-5
ASUS LCD Monitor VP299 Series
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long hours.
It is advised to take short breaks (at least 5 mins) after around 1 hour of
continuous working at the computer. Taking short and frequent breaks is more
effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises often. If
eye strain continues please consult a physician. Eye exercises: (1) Repeating
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related Macular
Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to
avoiding CVS (Computer Vision Syndrome).
3-6 Chapter 3: General Instruction
3. Color
Select the image color you like from this function.
Color
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Brightness
Color Temp.
Skin Tone
Saturation
Contrast
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Skin Tone: Contains three color modes including Reddish, Natural, and
Yellowish.
• IntheUserMode,colorsofR(Red),G(Green),andB(Blue)areuser-
configurable; the adjusting range is from 0 ~ 100.
3-7
ASUS LCD Monitor VP299 Series
4. Image
YoucanadjusttheimageSharpness,TraceFree,AspectControl,
VividPixel,
ASCR, Motion Sync, FreeSync, Shadow Boost from this
main function.
Image
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Sharpness
ASCR
Aspect Control
Trace Free
FreeSync
More
Motion Sync
VividPixel
Image
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Back
Shadow Boost
HDR
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
3-8 Chapter 3: General Instruction
• Motion Sync: Check to decrease motion blur and minimize ghosting part
when on-screen objects are fast moving. When this function is turned on,
the screen may flash slightly and the brightness will decrease.
• FreeSync: It can allow a FreeSync supported graphics source to
dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
• More: Return the next page of Image Setting.
• Back: Return the previous page of Image Setting.
• HDR: High Dynamic Range.Contains two HDR modes(ASUS Cinema
HDRandASUSGamingHDR).
• Shadow Boost: Dark color enhancement adjust monitor gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier be found.
• 4:3 is only available when input source is in 4:3 format。
3-9
ASUS LCD Monitor VP299 Series
5. PIP/PBP Setting
The PIP/PBP Setting allows you to open up another sub-window
connected from another video source besides the main-window from
your original video source.
PIP/PBP Setting
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
PIP/PBP Mode
PIP/PBP Source
Color Setting
Size
Position
By activating this function, this monitor displays two pictures from two
different video sources.
• PIP/PBP Mode: Selects PIP or PBP function, or turn it off.
• PIP/PBP Source: Selects the video input source among,“HDMI”,
“DisplayPort” or “USB Type-C”.
• Color Setting: Set Splendid mode for each PIP/PBP window.
• Size: Adjust the PIP size to “Small”, “Middle”, or “Large”.
• Position: Adjusts the position of PIP sub-window to “Right-Top”, “Left-
Top”, “Right-Bottom” or “Left-Bottom”.
6. Input Select
Select the input source from HDMI, DisplayPort, USB Type-C input
signal.
Input Select
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
HDMI
DisplayPort
USB Type-C
3-10 Chapter 3: General Instruction
7. System Setup
Adjuststhesystemconguration.
System Setup
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Splendid Demo Mode
Sound
GamePlus
More
Language
ECO Mode
QuickFit
OSD Setup
System Setup
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Back
Power Indicator
All Reset
Power Key Lock
Information
Key Lock
• Splendid Demo Mode: Activate the demo mode for the Splendid
function.
• GamePlus:TheGamePlusFunctionprovidesatoolkitandcreatesa
better gaming environment for users when playing different types of
games. Particularly, Crosshair function is specially designed for new
gamers or beginners interested in First Person Shooter (FPS) games.
ToactiveGamePlus:
• Press GamePlus Button toentertheGamePlusmainmenu.
• Activate Crosshair, Timer, FPS Counter or Display Alignment
function.
• Move the
button up/down to select and press to confirm the
function needed. Press button left to go off, and exit.
• Crosshair/Timer/FPS Counter is movable by pressing 5-way key.
3-11
ASUS LCD Monitor VP299 Series
GamePlusmainmenu GamePlus-Crosshair GamePlus-Timer
GamePlus
FPS
Crosshair
(Practice Mode)
Timer
FPS Counter
Display Alignment
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
• Sound: Adjust the sound settings to your preference.
• QuickFit:
The QuickFit function contains three patterns: (1) Grid
(2) Paper size (3) Photo size.
• Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment Grid 2Alignment Grid 1
• Paper size: Provides users to view their documents in real size on the
screen.
B5
B5
EXIT
• Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
3-12 Chapter 3: General Instruction
3x5 2x2
4x6
8x10 5x7
• ECO Mode: Activate the ecology mode for power saving.
• OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of
the OSD screen.
• Language: Select OSD language. The selections are: English, French,
German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia,
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional
Chinese, Japanese, Korean, Persian, Thai, and Indonesian.
• More: Return the next page of System Setting.
• Back: Return the previous page of System Setting.
• Key Lock: Disable all key functions.Pressing the down button for more
than five seconds to disable key lock function.
• Information:Displays the monitor information.
• Power Indicator: Turn the power LED indicator on/off.
• Power Key Lock: To disable / enable power key.
• All Reset: Selects “Yes” to revert all settings to the factory default mode.
3-13
ASUS LCD Monitor VP299 Series
8. Shortcut
Selecting this option allows you to set one shortcut key.
Shortcut
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Blue Light Filter
Brightness
Splendid
More
Volume
input Select
PIP/PBP Setting
Color Temp.
Shortcut
Standard Mode DisplayPort 2560x1080@60Hz
VP299CL HDR OFF
Back
Rest Reminder
GamePlus
Color Augmentation
QuickFit
• Shortcut : User can select from “Blue Light Filter” “Splendid”,
“Brightness”, “PIP/PBP Setting”, “Input Select”, “Color Temp.”,
“Volume ”, “QuickFit”, “Rest Reminder”, “Color Augmentation”,
“GamePlus” and set as shortcut key. The default setting is Input
Select.
3-14 Chapter 3: General Instruction
3.2 Specications
Model VP299CL
Panel Size 29” (73 cm)
Max. Resolution 2560x1080(WFHD)
Brightness (MAX) 350cd/m
2
Intrinsic Contrast Ratio (Typ.) 1000:1
Viewing Angle (CR>10) 178°(V)/178°(H)
Display Colors 16.7 M
Response Time 4MS(GraytoGray),1ms(MPRT)
Satellite Speaker Yes
Sound from HDMI Yes
Type-C input Yes
DisplayPort input Yes
HDMI input Yes
Earphone jack 3.5mm Mini-jack
PowerONConsumption <19W
Power saving mode <0.5W
Power off mode < 0.5W
Voltage Rating AC 100~240V(Built-in), 1.5A
Tilt -5°~+23°
VESA Wall Mounting Yes(100mmx100mm)
Phys. Dimension (WxHxD) 689.77x604.05x187.05mm(highest)
689.77x474.05x187.05mm(lowest)
Phys. Dimension without stand
(WxHxD)
(For VESA Wall Mount)
689.77x315.17x58.03mm
Box Dimension (WxHxD) 780mmx515mmx205mm
NetWeight(Esti.) 5.84kg(Net);3.89kg(withoutstand)
GrossWeight(Esti.) 9.02kg
3-15
ASUS LCD Monitor VP299 Series
3.3 Troubleshooting (FAQ)
Problem Possible Solution
PowerLEDisnotON • Press the button to check if the monitor is in the
ONmode.
• Check if the power cord is properly connected to
the monitor and the power outlet.
• Check Power Indicator function in main menu OSD.
Select“ON”toturnonpowerLED.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ONmode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly
working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• AdjusttheR/G/BcolorsettingsorselecttheColor
Temperature via OSD.
Nosoundorsoundislow • Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
• Make sure the audio source is correct on the OSD.
3-16 Chapter 3: General Instruction
3.4 Supported Timing List
PC Supported Primary Timing
Resolution HDMI DP/Type-c
720 x 400 @ 70Hz V V
640x480@60Hz V V
640x480@67Hz V V
640x480@72Hz V V
640x480@75Hz V V
800x600@56Hz VV
800x600@60Hz V V
800x600@72Hz V V
800x600@75Hz V V
832x624@75Hz V V
1024x768@60Hz V V
1024x768@70Hz V V
1024x768@75Hz V V
1280x1080@60Hz V V
1280x1024@75Hz V V
1920x1080@60Hz V V
1680x1050@60Hz VV
1440 x 900 @ 60Hz V V
1280x1024@60Hz V V
1280x960@60Hz V V
1280x720@60Hz V V
640x480P59.94/60Hz
V V
1280x720P59.94/60Hz
V V
1280x720P50Hz
V V
1920x1080P50Hz
V V
720 x 576 P 50Hz
V V
720x480P59.94/60Hz
V V
1920x1080P59.94/60Hz
V V
2560x1080P50Hz
V V
2560x1080P60Hz
V V
2560x1080@60Hz
V V
2560x1080@75Hz
V V
3840x2160P50Hz
V X
3840x2160P60Hz
V X