Table of Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- 2.1 Assembling the monitor base
- 2.2 Adjusting the monitor
- 2.3 Connecting the cables
- 2.4 Turning on the monitor
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications Summary
- 3.3 Troubleshooting (FAQ)
- 3.4 Supported operating modes
ASUS VX228H User Manual
Displayed below is the user manual for VX228H by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
VX228 Series
LCD Monitor
User Guide
ii
Copyright © 2013 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
First Edition
July 2013
iii
Table of contents
Notices ......................................................................................................... iv
Safety information ....................................................................................... v
Care & Cleaning .......................................................................................... vi
Takeback Services ..................................................................................... vii
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents ......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-2
1.3.1 Front view ....................................................................... 1-2
1.3.2 Back view ........................................................................ 1-4
1.3.3 QuickFit Function ............................................................ 1-5
1.3.4 GamePlus Function ........................................................ 1-6
2.1 Assembling the monitor base ..................................................... 2-1
2.1.1 Assembling the base ....................................................... 2-1
2.1.2 Detaching the base ......................................................... 2-2
2.2 Adjusting the monitor .................................................................. 2-3
2.3 Connecting the cables ................................................................. 2-3
2.4 Turning on the monitor ................................................................ 2-5
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 Howtorecongure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-1
3.2 SpecicationsSummary ............................................................. 3-5
3.3 Troubleshooting (FAQ) ................................................................ 3-7
3.4 Supported operating modes ....................................................... 3-8
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This product implements power management functionality. In case of no
signal input after 10 seconds, the product automatically goes to sleep/
standby mode.
As an Energy Star® Partner, our company has determined
that this product meets the Energy Star® guidelines for
energyefciency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extension cords. Overloading can
result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked
between 100-240V AC.
• If you encounter technical problems with the monitor, contact a
qualified service technician or your retailer.
AEEE Yönetmeliğine Uygundur
• This product may contains chemicals known to the State of California
to cause cancer , and birth defects or other reproductive harm.
Wash hands after handling.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the
cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to
make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying
to complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
vii
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
1-1
ASUS LCD Monitor VX228H, VX228N, VX228D
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper,
broader, and brighter display, plus a host of features that enhance your
viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
1 x Adapter
1 x Power cable
1 x VGA cable
1 x DVI cable (
*depends on regions, only available for VX228N
)
1 x DVI-HDMI cable (
*depends on regions, only available for
VX228H
)
1 x HDMI cable (
*depends on regions, only available for VX228H
)
1 x Audio cable (
*only available for VX228H
)
1 x Quick start guide
1 x Warranty card
If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Monitor introduction
1.3.1 Front view
VX228H
74 6
74 2
VX228N/D
74 6
74 2
1. Button:
• Activates the QuickFit function. (Please refer to 1.3.3 QuickFit
Function).
2. , , Button:
• Press this hotkey to switch from six video preset modes
(Scenery Mode, Standard Mode, Theater Mode, Game Mode,
Night View Mode, and sRGB Mode) with SPLENDID™ Video
Intelligence Technology.
• Exit the OSD menu or go back to the previous menu as the OSD
menu is active.
• Automatically adjusts the image to its optimized position, clock,
and phase by pressing this button for 2~4 seconds.
3. / Button:
• Decreases values or moves your selection left/down.
• Volume hotkey (only available in VX228H models)
• Contrast hotkey (only available in VX228N/D models)
1-3
ASUS LCD Monitor VX228H, VX228N, VX228D
4. MENU Button:
• Turns on the OSD menu.
• Enacts the selected OSD menu item.
• Press this button for 5 seconds to activate the Key Lock function.
Press it again for 5 seconds to disactivate the function.
5. Button:
• Increases values or moves your selection right/up.
• Brightness hotkey
6. Input Select Button:
• Selects an available input source (only available in VX228H
models).
Press (Input Select button) to display VGA/HDMI/DVI signals after you
connect a VGA, HDMI, or DVI cable with the monitor.
7. Power Button/Power Indicator:
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the table below.
Status Description
White ON
Orange Standby / Power saving
OFF OFF
1-4 Chapter 1: Product Introduction
1.3.2 Back view
VX228H
HDMI
2
HDMI
1
VGA
VGA
HDMIHDMI
21
4
6
VX228N/D
VGA
DVI
VGADVI
527
6
1. HDMI port: This port is for connection with an HDMI compatible
device.
2. VGA port: This 15-pin port is for PC VGA connection.
3. Audio-in port: This port connects PC audio source by the bundled
audio cable.
4. Earphone jack: This port connects to an earphone.
5. DC-in port: This port connects the adapter.
6. Kensington Lock: This port connects a lock-and-cable apparatus for
security purposes.
7. DVI port: This 24-pin port is for PC (Personal Computer) DVI-D
digital signal connection (only available in VX228N models).
1-5
ASUS LCD Monitor VX228H, VX228N, VX228D
1.3.3 QuickFit Function
The QuickFit function allows users to have a preview of the document or
photo layout directly on screen without printing test copies.
QuickFit has two patterns:
a. Grid pattern: Facilitates designers and users to organize content
and layout on one page and achieve a consistent look and feel.
Alignment Grid
QuickFitEXIT
b. Photo size: Provides photographers and other users to
accurately view and edit their photos in real size on the screen.
4x6 3x5 2x2
QuickFitEXIT
5x78x10
QuickFitEXIT
To activate QuickFit, press the QuickFit hotkey repeatedly to switch
between different pattern sizes.
When QuickFit is activated, press the control buttons to make adjustments.
The QuickFit OSD displayed in the lower right corner of the screen will
guide users to make selections.
VX228H VX228N/D
QuickFitEXITQuickFitEXIT
1-6 Chapter 1: Product Introduction
1.3.4 GamePlus Function
The GamePlus Function provides a toolkit and creates a better gaming
environment for users when playing different types of games. In addition,
Aimpoint function is specially designed for new gamers or beginners who
are interested in First Person Shooter (FPS) games.
To activate GamePlus:
1. Press the MENU button to activate the OSD menu.
2. Press / and to select System Setup and press the
MENU button to enter the System Setup sub-menu.
3. Press / and to
select GamePlus and press the
MENU button to enter its
sub-menu.
4. Press / and to
select ON and press the MENU
button to enter its sub-menu.
5. Press / to select Aimpoint or Timer and press the MENU
buttontoconrmtheselection.
6. To exit the OSD menu, press the button.
GamePlus Main Menu GamePlus - Aimpoint
: Exit / Off: Select MENU : OK
GamePlus
(Practice Mode)
Aimpoint Timer
: Exit / Off: Select MENU : OK
GamePlus - Timer GamePlus - Timer - Position
: Exit / Off: Select MENU : OK : Exit / Off: Select
Position
MENU : OK
To exit the GamePlus function, do one of the following:
- Press the button.
- Press the MENU button and select System Setup >
GamePlus > OFF
.
VX228
Splendid
Color
Image
Input Select
System Setup
GamePlus
ON
OFF
Move Menu Exit
2-1
ASUS LCD Monitor VX228H, VX228N, VX228D
2.1 Assembling the monitor base
2.1.1 Assembling the base
1. Have the front of the monitor face down on a table.
2. Attachthebasetothearmandxwiththescrewtojointhemtightly.
Youcaneasilytightenthescrewbyngers.
3. Adjust the monitor to the angle that is most comfortable for you.
We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
2-2 Chapter 2: Setup
2.1.2 Detaching the base
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base, and remove the base from the stand.
3. Or, you may directly use a screwdriver to remove the screw that
secures the base to the stand, and detach the base from the stand.
• We recommend that you cover the table surface with soft cloth to
prevent damage to the monitor.
• Hold the base while removing the screw.
2-3
ASUS LCD Monitor VX228H, VX228N, VX228D
2.2 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable
for you.
• Hold the stand to prevent the monitor from falling while changing its
angle.
• Youcanadjustthemonitor’sanglefrom-5˚to20˚.
-5 to +20
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.3 Connecting the cables
Connect the cables according to the following instructions:
VX228H
HDMI
2
HDMI
1
VGA
VGA
HDMIHDMI
21
HDMI
Audio-in DC-IN
VGA Earphone jack
2-4 Chapter 2: Setup
VX228N
VGA
DVI
VGADVI
DC-IN
VGA
DVI
(VX228N only)
VX228D
VGA
VGA
DC-IN
VGA
• To connect the power cord:
a. Connect the adapter to the monitor's DC input.
b. Connect one end of the power cable to the adapter, and the other
end to a power outlet.
• To connect the VGA, HDMI, or DVI cable:
a. Plug one end of the VGA, HDMI, or DVI cable to the monitor's
VGA, HDMI, or DVI port.
b. Connect the other end of the VGA, HDMI, or DVI cable to your
computer's VGA, HDMI, or DVI port.
c. Tighten the two screws to secure the VGA or DVI connector.
• To connect the audio cable: connect one end of the audio cable to
the monitor’s Audio-in port, the other end to the computer’s audio-out
port.
2-5
ASUS LCD Monitor VX228H, VX228N, VX228D
• To use the earphone:
a. When an HDMI cable is connected, connect the end with plug
type to the monitor’s earphone jack.
b. When VGA and Audio-in-line is connected, connect the end with
plug type to the monitor's earphone jack.
• When multiple video cable signals are connected, you can choose the
desired input by pressing the
Input Select key or select from the Input
Select item in the OSD menu.
• HDMI port only available in VX228H models.
• DVI port only available in VX228N models.
2.4 Turning on the monitor
Press the power button . See 1.3.1 Front view for the location of the
power button. The power indicator lights up in white to show that the
monitor is ON.
3-1 Chapter 3: General Instruction
3.1 OSD (On-Screen Display) menu
3.1.1 Howtorecongure
1. Press the MENU button
to activate the OSD menu.
2. Press / and to
navigate through the functions.
Highlight and activate the desired
function by pressing the MENU
button. If the function selected has
a sub-menu, press / and again to navigate through
the sub-menu functions. Highlight and activate the desired sub-menu
function by pressing the MENU button.
3. Press / and to change the settings of the selected
function.
4. To exit the OSD menu, press the button. Repeat step 2 and step 3
to adjust any other function.
3.1.2 OSD Function Introduction
1. Splendid
This function contains six sub-
functions that you can select for
your preference. Each mode has
the Reset selection, allowing you
to maintain your setting or return
to the preset mode.
• Scenery Mode: best choice for scenery photo display with
SPLENDID™ Video Enhancement.
• Standard Mode: best choice for document editing with
SPLENDID™ Video Enhancement.
• Theater Mode: best choice for movies with SPLENDID™ Video
Enhancement.
• Game Mode: best choice for games playing with SPLENDID™
Video Enhancement.
• Night View Mode: best choice for dark-scene games or movies
with SPLENDID™ Video Enhancement.
• sRGB Mode: best choice for viewing photos and graphics from
PCs.
VX228
Splendid
Color
Image
Input Select
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Move Menu Exit
VX228
Splendid
Color
Image
Input Select
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB Mode
Move Menu Exit
3-2
ASUS LCD Monitor VX228H, VX228N, VX228D
In the Standard Mode, the Saturation, Skin Tone, Sharpness, and
ASCR functions are not user-configurable.
In the sRGB Mode, the Brightness, Contrast, Saturation, Color
Temp., Skin Tone, Sharpness, and ASCR functions are not user-
configurable.
2. Color
You can adjust Brightness, Contrast,
Saturation, Color Temp., and Skin
Tone from this menu.
• Brightness: the adjusting
range is from 0 to 100.
button is a hotkey to activate
this function.
• Contrast: the adjusting range is from 0 to 100.
• Saturation: the adjusting range is from 0 to 100.
• Color Temp.: contains four modes including Cool, Normal,
Warm and User Mode.
• Skin Tone: contains three color modes including Reddish,
Natural, and Yellowish.
• SmartView: provides better display quality under big viewing
angle.
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
user-configurable; the adjusting range is from 0 ~ 100.
3. Image
VX228H
VX228N
/D
You can adjust Sharpness, Trace Free, Aspect Control, VividPixel, ASCR,
Position (VGA only), and Focus (VGA only) from this menu.
• Sharpness: the adjusting range is from 0 to 100.
• Trace Free: adjusts the response time of the monitor. The
adjusting range is from 0 to 100 in 20 increments (only available
in VX228H models).
VX228
Splendid
Color
Image
Input Select
System Setup
Brightness 100
Contrast 80
Color Temp
.U
ser Mode
Saturation 50
NaturalSkin Tone
OFFSmart View
Move Menu Exit
VX228
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Sharpness 60
OFF
FullAspect Control
25VividPixel
ASCR
Position
Focus
VX228
Splendid
Color
Image
Input Select
Move Menu Exit
System Setup
Sharpness 60
OFF
FullAspect Control
25VividPixel
ASCR
Position
60Trace Free
1/2
3-3 Chapter 3: General Instruction
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0 to 100.
• ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio)
function (only available in Scenery Mode, Theater Mode, Game
Mode, and Night View Mode).
• Position: adjusts the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100 (only available for VGA input).
• Focus: reduces the Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
Input Select
VX228H
VX228N
VX228D
In this menu, you can select your desired input source:
-
VX228H:
VGA, HDMI-1 or HDMI-2.
-
VX228N:
VGA or DVI.
-
VX228D:
VGA.
VX228
Splendid
Color
Image
Input Select
System Setup
VGA
DVI
Move Menu Exit
VX228
Splendid
Color
Image
Input Select
System Setup
VGA
HDMI-1
HDMI-2
Move Menu Exit
VX228
Splendid
Color
Image
Input Select
System Setup
VGA
Move Menu Exit
• Aspect Control: adjust the aspect ratio to full, 4:3, 1:1 or OverScan
4:3 is only available when input source is in 4:3 format
OverScan is only available for the HDMI input source
3-4
ASUS LCD Monitor VX228H, VX228N, VX228D
4. System Setup
VX228H
VX228N/D
Allows you to adjust the system.
• Splendid Demo Mode: splits the screen into two for Splendid
mode comparison (only available in Scenery Mode, Theater
Mode, Game Mode, and Night View Mode).
• Volume (only available in VX228H models): Adjust the earphone
output volume level. The adjusting range is from 0 to 100.
• GamePlus: Activate the GamePlus function.
• ECO Mode: Activate the ecology mode for power saving. (Some
gray levels may not be distinguished if ECO is ON. Its brightness
is lower than that when setting the Contrast Ratio to 100.)
• OSD Setup: Adjust the horizontal postition (H-Position), vertical
position (V-Position), OSD Timeout, DDD/CI, and Transparency
of the OSD screen.
• Language: Select OSD language. The selections are English,
French, German, Spanish, Italian, Dutch, Russian, Traditional
Chinese, Simplified Chinese, and Japanese.
• Key Lock: Enable/Disable the Key Lock function.
• Information: Display the monitor information of Input Port,
Resolution, H-freq., V-freq, and Model Name.
• All Reset: Set to “Yes” to revert all settings to the factory default
status.
VX228
Splendid
Color
Image
Input Select
System Setup
Splendid Demo Mode OFF
1/2
Language
OSD Setup
English
OFF
GamePlus
ECO Mode
Key Lock
Move Menu Exit
VX228
Splendid
Color
Image
Input Select
System Setup
Language
Splendid Demo Mode OFF
OSD Setup
English
1/2
50Volume
OFF
GamePlus
ECO Mode
Move Menu Exit
3-5 Chapter 3: General Instruction
3.2 SpecicationsSummary
Model Name VX228H
Panel Type TFT LCD
Panel Size 21.5” (16:9, 68.6 cm) wide screen
Max. Resolution 1920 x 1080
Brightness (Typ.) 250 cd/m2 (Center 1 point, type)
Contrast Ratio (Typ.) 1000:1 (Typical)
ASUS Smart Contrast Ration
(ASCR) ≥80,000,000:1(withASCRon)
Color Saturation (NTSC) 72 % (Typ)
Viewing Angle (H/V) CR>10 R/L 170 (Typ.), U/D 160 (Typ)
Display Colors 16.7 M colors (6 bits + Advanced-FRC)
Response Time 1ms with OD
Pixel Pitch 0.08275*RGB(H) x 0.24825(V) mm
Full HD 1080P
SPLENDIDTM Video Enhancement Yes
SPLENDIDTM selection 6 video preset modes (by hotkey)
Auto adjustment Yes (by hotkey)
Color temperature selection 4 color temperatures
Skin-Tone selection 3 skin tones
Digital input HDMI (X2)
Analog input D-Sub
Audio-in port 3.5 mm Mini-jack
Earphone jack Yes
Kensington Lock Slot Yes
Auto Adjustment Hotkey Yes
Brightness Adjustment Hotkey Yes
Volume Adjustment Hotkey Yes
Input Selection Hotkey Yes
Colors Black
Speaker (Built-in) 1 W (x2)
Power LED White (On) / Orange (Standby)
3-6
ASUS LCD Monitor VX228H, VX228N, VX228D
Model Name VX228H
Tilt -5° ~ +20°
Voltage Rating
40W adaptor DC 19V 2.1A, 100~240V at 50/60Hz
Enertronix, EXA1204YH
Delta, ADP-40KD BB
Power Consumption
Power On: 26W (max) in Test Line Pattern with audio,
Standby: < 0.5W at AC110V~ AC220V
Power Off: < 0.5W at AC110V~ AC220
Temperature (Operating) 0 ~ 40° C
Temperature (Non-operating) -20 ~ 60° C
Dimensions (W x H x D) 514.9 x 385.9 x 210.0 mm (monitor)
568 x 480 x 121 mm (package)
Weight (Esti.) 2.4 ± 1.0 kg (Net), 4.1 ± 1.0 kg (Gross)
Multi-languages
21 languages (English, French, German, Spanish,
Italian, Dutch, Russian, Poland, Czech, Croatia,
Hungary, Romania, Portuguese, Turkey, Traditional
Chinese,SimpliedChinese,Japanese,Korean
Persian, Thai, Indonesian)
Accessories
Adapter, Power cable, VGA cable, DVI cable
(
*depends on regions, only available for VX228N
),
DVI-HDMI cable (
*depends on regions, only available
for VX228H
), HDMI cable ( *
depends on regions, only
available for VX228H)
Audio cable (
*only available for
VX228H
), Quick Start Guide, Warranty card
Regulation approvals
UL/cUL, CB, CE, FCC, CCC, BSMI, c- Tick, VCCI,
HDMI, Win 7 & 8 WHQL, EuP, Energy Star® 6.0,
China Energy Label, RoHS, WEEE, CU
*Adaptor has PSE Regulation approvals.
*Specicationssubjecttochangewithoutnotice.
3-7 Chapter 3: General Instruction
Model Name VX228N VX228D
Panel Type TFT LCD
Panel Size 21.5” (16:9, 68.6 cm) wide screen
Max. Resolution 1920 x 1080
Brightness (Typ.) 250 cd/m2 (Center 1 point, type)
Contrast Ratio (Typ.) 1000:1 (Typical)
ASUS Smart Contrast Ration
(ASCR) ≥80,000,000:1(withASCRon)
Color Saturation (NTSC) 72 % (Typ)
Viewing Angle (H/V) CR>10 R/L 170 (Typ.), U/D 160 (Typ)
Display Colors 16.7 M colors (6 bits + Advanced-FRC)
Response Time 5ms
Pixel Pitch 0.08275*RGB(H) x 0.24825(V) mm
Full HD 1080P
SPLENDIDTM Video Enhancement Yes
SPLENDIDTM selection 6 video preset modes (by hotkey)
Auto adjustment Yes (by hotkey)
Color temperature selection 4 color temperatures
Skin-Tone selection 3 skin tones
Digital input DVI NA
Analog input D-Sub
Kensington Lock Slot Yes
Auto Adjustment Hotkey Yes
Brightness Adjustment Hotkey Yes
Contrast Adjustment Hotkey Yes
Colors Black
Power LED White (On) / Orange (Standby)
Tilt -5° ~ +20°
Voltage Rating
40W adaptor DC 19V 2.1A, 100~240V at 50/60Hz
Enertronix, EXA1204YH
Delta, ADP-40KD BB
Power Consumption
Power On: 24W (max) in Test Line Pattern,
Standby: < 0.5W at AC110V~ AC220V
Power Off: < 0.5W at AC110V~ AC220V
Temperature (Operating) 0 ~ 40° C
3-8
ASUS LCD Monitor VX228H, VX228N, VX228D
Model Name VX228N VX228D
Temperature (Non-operating) -20 ~ 60° C
Dimensions (W x H x D) 514.9 x 385.9 x 210.0 mm (monitor)
568 x 480 x 121 mm (package)
Weight (Esti.) 2.4 ± 1.0 kg (Net), 4.1 ± 1.0 kg (Gross)
Multi-languages
21 languages (English, French, German, Spanish,
Italian, Dutch, Russian, Poland, Czech, Croatia,
Hungary, Romania, Portuguese, Turkey, Traditional
Chinese,SimpliedChinese,Japanese,Korean
Persian, Thai, Indonesian)
Accessories
Adapter, Power cable, VGA cable, DVI cable
(
*depends on regions, only available for VX228N
),
DVI-HDMI cable (
*depends on regions, only available
for VX228H
), HDMI cable ( *
depends on regions, only
available for VX228H)
Audio cable (
*only available for
VX228H
), Quick Start Guide, Warranty card
Regulation approvals
UL/cUL, CB, CE, FCC, CCC, BSMI, c- Tick, VCCI,
HDMI, Win 7 & 8 WHQL, EuP, Energy Star® 6.0,
China Energy Label, RoHS, WEEE, CU
*Adaptor has PSE Regulation approvals.
*Specicationssubjecttochangewithoutnotice.
3-9 Chapter 3: General Instruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON • Press the button to check if the monitor is in the
ON mode.
• Check if the adapter and power cable are properly
connected to the monitor and the power outlet.
The power LED lights amber and
there is no screen image
• Check if the monitor and the computer are in the
ON mode.
• Make sure the signal cable is properly connected
the monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available
monitor to check if the computer is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness settings via
OSD.
Screen image is not centered or
sized properly • Press the button for two seconds to
automatically adjust the image.
• Adjust the H-Position or V-Position settings via
OSD.
Screen image bounces or a wave
pattern is present in the image
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Move electrical devices that may cause electrical
interference.
Screen image has color defects
(white does not look white)
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the Color
Temperature via OSD.
Screen image is blurry or fuzzy • Press the button for two seconds to
automatically adjust the image (for VGA mode only).
• Adjust the Phase and Clock settings via OSD.
No sound or sound is low • Make sure the audio cable is properly connected to
the monitor.
• Adjust the volume settings of both your monitor and
computer.
• Make sure the computer sound card driver is
properly installed and activated.
3-10
ASUS LCD Monitor VX228H, VX228N, VX228D
3.4 Supported operating modes
Mode Resolution Refresh Rate
Horizontal
Frequency
(KHz)
Vertical
Frequency
(Hz)
Pixel (MHz)
DOS 720x400@70Hz 900x449 31.469 70.087 28.322
VGA
640x480@60Hz 800 x 525 31.469 59.940 25.175
640x480@72Hz 832 x 520 37.861 72.809 31.500
640x480@75Hz 840x500 37.500 75.000 31.500
SVGA
800x600@56Hz 1024 x 625 35.156 56.250 36.000
800x600@60Hz 1056 x 628 37.879 60.317 40.000
800x600@72Hz 1040 x 666 48.077 72.188 50.000
800x600@75Hz 1056 x 625 46.875 75.000 49.500
XGA
1024x768@60Hz 1344x806 48.363 60.004 65.000
1024x768@70Hz 1328x806 56.476 70.069 75.000
1024x768@75Hz 1312x800 60.023 75.029 78.750
VESA 1152x864@75Hz 1600x900 67.5 75.000 108.00
SXGA
1280x1024@60Hz 1688x1066 63.981 60.020 108.000
1280x1024@75Hz 1688x1066 79.976 75.025 135.00
1280x960@60Hz 1800x1000 60.000 60.000 108.00
WXGA
1280x800@60Hz 1680x831 49.702 59.810 83.500
1280x720@60Hz 1650x750 45.00 60.000 74.25
1280x768@60Hz 1664x798 47.776 59.870 79.5
1360x768@60Hz 1792x795 47.712 60.015 85.500
1366x768@60Hz 1792x798 47.712 59.790 85.500
WXGA+ 1440x900@60Hz 1904x934 55.935 59.887 106.500
UXGA 1600x1200@60Hz 2160x1250 75.000 60.000 162.000
WSXGA+ 1680x1050@60Hz 2240x1089 65.290 59.954 146.250
WUXGA
1920x1080@60Hz 2576x1120 67.158 59.963 173.000
1920x1080@60Hz 2200x1125 67.500 60.000 148.500
1920x1080@60Hz 2080x1111 66.587 59.934 138.500
MAC 640x480@66.66Hz 864x525 35 66.66 30.24
SVGA 832x624@75Hz 1152x667 49.714 74.533 57.27
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
* This monitor supports HD (480p, 576p, 720p, 1080i/p) video content from game consoles, DVD
players and other consumer video devices via HDMI.