AVer EVC150 User Manual
Displayed below is the user manual for EVC150 by AVer which is a product in the Video Conferencing Systems category. This manual has pages.
Related Manuals
EVC150
EVC130P
EVC100/EVC130
User’s Manual
CONTENTS
INTRODUCTION .................................................................................................................... 1
Features ....................................................................................................................................................... 1
Package Contents ........................................................................................................................................ 2
INSTALLATION ..................................................................................................................... 3
Getting Familiar With the AVer EVC -Series ................................................................................................. 3
Main System ............................................................................................................................................ 3
MIC .......................................................................................................................................................... 4
Camera .................................................................................................................................................... 5
Remote Controller .................................................................................................................................... 6
Connections ................................................................................................................................................. 8
Connecting Monitors (VGA Out/HDMI OUt) ............................................................................................. 9
Connecting the Camera (Camera In) ....................................................................................................... 9
Connecting the MIC (MIC In) ................................................................................................................. 10
Connecting the LAN (RJ-45) .................................................................................................................. 10
Connecting the Power (DC 12V) ............................................................................................................ 11
Connecting PC (VGA in) ........................................................................................................................ 11
Connecting the Audio (Audio IN/OUT) ................................................................................................... 12
USB Storage (USB Ports) ...................................................................................................................... 13
BEFORE INSTALLATION ..................................................................................................... 14
Using the Camera ...................................................................................................................................... 14
Infrared Sensor (IR) .................................................................................................................................... 14
Positioning the MIC .................................................................................................................................... 15
AVER EVC WIZARD SETUP ................................................................................................. 16
Start ....................................................................................................................................................... 16
Language ............................................................................................................................................... 17
Site Name .............................................................................................................................................. 17
Network Setting ..................................................................................................................................... 17
Public IP Configuration (Outside of Firewall): ......................................................................................... 18
Private IP CONFIGURATION (Behind Firewall Port Forwarding): .......................................................... 19
SIP Setting ............................................................................................................................................. 20
AVER EVC OPERATION ....................................................................................................... 24
Before You Begin ....................................................................................................................................... 24
Home Screen ............................................................................................................................................. 24
Configuration Icons ................................................................................................................................ 24
Camera and MIC Icons .......................................................................................................................... 25
WAN Address ........................................................................................................................................ 25
ReaL-Time Clock ................................................................................................................................... 25
System Info ............................................................................................................................................ 26
Dial ............................................................................................................................................................. 26
Phonebook ................................................................................................................................................. 29
Group ..................................................................................................................................................... 29
New Site (CONTACT in PHONEBOOK) ................................................................................................ 34
Contacts List .......................................................................................................................................... 37
Favorite .................................................................................................................................................. 37
Online Phonebook ................................................................................................................................. 38
Call History ................................................................................................................................................. 39
General Setting .......................................................................................................................................... 41
Call Settings ........................................................................................................................................... 41
System Settings ..................................................................................................................................... 44
Administrator .......................................................................................................................................... 46
Monitor ................................................................................................................................................... 49
Date and Time ....................................................................................................................................... 51
Reset System ........................................................................................................................................ 53
Default Layout ........................................................................................................................................ 55
Video/Audio ................................................................................................................................................ 56
Camera .................................................................................................................................................. 56
Microphone ............................................................................................................................................ 60
Video/Audio Codecs .............................................................................................................................. 62
Network ...................................................................................................................................................... 63
LAN Configuration .................................................................................................................................. 63
LAN Configuration (IPv6) ....................................................................................................................... 66
Advance Network ................................................................................................................................... 68
Firewall .................................................................................................................................................. 69
SIP ......................................................................................................................................................... 71
SIP Server ............................................................................................................................................. 75
Gatekeeper ............................................................................................................................................ 78
Test Utilities ........................................................................................................................................... 81
WEB CONFIGURATIONS ..................................................................................................... 82
Using the WebTool ..................................................................................................................................... 82
Managing Phonebook ................................................................................................................................. 84
Edit and Save ........................................................................................................................................ 84
Download Phonebook Entries ................................................................................................................ 85
Upload Phonebook Entries .................................................................................................................... 85
Download Call History Entries ................................................................................................................ 85
LDAP Setting ......................................................................................................................................... 86
Online Phonebook ................................................................................................................................. 86
General Setting .......................................................................................................................................... 87
Dual Stream Bandwidth Adjustment ....................................................................................................... 87
Update System ...................................................................................................................................... 87
EZ Join .................................................................................................................................................. 88
Video/Audio ................................................................................................................................................ 89
Primary Input source .............................................................................................................................. 89
Customized Logo and Boot Animation ........................................................................................................ 90
SCENARIOS FOR LAN CONNECTION .................................................................................. 91
Public IP Configuration (Outside of Firewall) .............................................................................................. 91
Private IP Configuration (Behind Firewall with Port Forwarding) ................................................................. 93
H.460 Gatekeeper with Firewall Traversal .................................................................................................. 95
TROUBLESHOOTING .......................................................................................................... 96
Audio .......................................................................................................................................................... 96
Video/Display ............................................................................................................................................. 96
Network ...................................................................................................................................................... 97
Others ...................................................................................................................................................... 100
REMOTE CONTROL BATTERY SAFETY INFORMATION .................................................... 100
LIMITED WARRANTY ........................................................................................................ 101
Limitations of Warranty ............................................................................................................................. 101
Disclaimer of Warranty ............................................................................................................................. 101
Limitation of Liability ................................................................................................................................. 102
Governing Law and Your Rights ............................................................................................................... 102
FEDERAL COMMUNICATIONS COMMISSION STATEMENT (CLASS A) ............................. 102
Class A ITE .............................................................................................................................................. 102
CE Class A (EMC) .................................................................................................................................... 103
COPYRIGHT ...................................................................................................................... 103
Trademarks .............................................................................................................................................. 103
Disclaimer ................................................................................................................................................ 103
1
Introduction
Thank you for choosing EVC-Series which offers professional videoconferencing experience in new
cost performance benchmark.
EVC-Series gives you the latest technologies; slim form factor, flexible integration options and
backward compatibility to most videoconferencing install bases. It makes any business meetings and
special events much more reliable, effective, and secure.
Features
Make point-to-point call to another H.323 or SIP videoconferencing system
Support full content sharing experience (send and receive) at 30fps, send content from VGA or IP
Dual monitor support via HDMI and VGA
Support CIF (352x240) up to Full HD (1920x1080 30fps) video call (EVC100 only up to 720p)
EVC100/EVC130 with Fixed camera is 88 wide degree 4x Digital zoom with 2Mp low lux sensor
EVC130P with PTZ camera is 16x Optics PTZ camera with 2Mp low lux sensor
EVC150 with PTZ camera II is 18x Total zoom PTZ camera with 2Mp low lux sensor
Include one microphone array, much better audio pick up than competitor offering
10/100 and Gigabit Ethernet; video bandwidth from 64Kbps to 4Mbps
Support IPv4 / IPv6 and Wake-on-LAN (WOL)
User-friendly on screen operation, support up to 22 languages
Support Phonebook download, upload and edit
Call history lookups of received, placed and missed calls, allow directly saving it to favorite call list
Support H.460 Gatekeeper for NAT and firewall traversal
G.722.1C* wideband support
Infrared (IR) remote control has power button; system supports remote API for AV integration
Secure communication using AES 128bit encryption
*:G.722.1/G.722.1C, licensed from Polycom®
2
Package Contents
The following items are included in the package. Please check if each item is available before using.
1
2
/ /
3
4
5
6
7
8
9
10
11
12
13
© 2 0 1 3 A V e r I n fo r m at io n I n c. All Rig ht s R e s e rv e d.
AVer EVC
Quick In stalla on Gui de
Package Contents
1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
1. Main System
2. Camera (The c amera willva ry depending on the model.)
3. Microphone
4. Remote Control
5. Power Adap ter
6. Power Cord
7. VGA Cable
8. Mini Din 8 pin MIC Cable
9. HDMI Cable
10. Camera Cable
11. RJ-45 Cable
12. Warranty Card
13. Quick Installatio n Guide
14. AAA Batteries
15. Back Panel Label
Layer 1 Layer 2 Layer 3 Layer 4
2
3
5
4
112 13 14 15 6 7 8 9 10 11
Accessory Pack
Cables
Camera, Microphone,
Remote and Adapter
Main System
14
15
1. Main System
2. Camera
3. Microphone
4. Remote Control
5. Power Adapter
6. Power Cord
7. VGA Cable
8. Mini Din 8 pin MIC Cable (5m)
9. HDMI Cable
10. Camera Cable (3m)
11. RJ-45 Cable (3m)
12. Warranty Card
13. Quick Installation Guide
14. AAA Batteries
15. Back Panel Label
The power cord will vary depending on the standard power outlet of the country where it is sold.
The camera will vary depending on choosing EVC model of EVC100/EVC130/EVC130P/EVC150.
3
Installation
Getting Familiar With the AVer EVC -Series
EVC includes Main System, MIC, Camera and Remote Controller.
MAIN SYSTEM
Front Panel:
(1) (2) (3)
Name
Function
(1) LED Indicator
Show you the status of your LAN connection.
Solid Green: LAN connection is successfully
Flash Green: Data transmission is processing through the LAN
connection.
(2) POWER Button
Press this button to turn on/off main system. Red: power off; Blue: power
on
(3) USB Port
Use to connect the USB storage for system log saving and FW upgrade.
Back Panel:
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Name
Function
(1) POWER Port
Connect the power supply cord and adapter to the power port located on
the back panel. And connect the other end of the power cord to a
suitable power outlet.
(2) USB Port
This port is the same as USB Port located on the front panel.
(3) CAMERA IN Port
Connect the camera to the main system via a camera cable.
(4) VGA OUT Port
Connect the VGA cable to the VGA OUT port located on the back panel,
and connect the other end of VGA cable to a display device to output
video signal. In dual screen configuration, the output screen connected
to this port will be set up to secondary screen automatically.
4
(5) AUDIO OUT Port
Use to connect the main system to external speakers or amplifiers for
audio signal output.
(6) HDMI OUT Port
Connect an HDMI cable from the HDMI monitor to HDMI OUT port
located on the back panel. The HDMI interface allows you to transmit
both audio and video signals over a single cable (HDMI cable). In dual
screen configuration, the output screen connected to this port will be set
up to primary screen automatically.
(7) VGA IN Port
Connect the VGA cable to the VGA IN port located on the back panel,
and connect the other end of VGA cable to a VGA input sources (ex.
Document camera, Laptop or Desktop) to input video signal.
(8) AUDIO IN Port
Receive audio signal from an external audio source through RCA left
and right audio connections.
(9) MIC IN Port
Receive audio signal from MIC device via a mini din 8 pin MIC cable.
(10) LAN Port
Use the RJ-45 Ethernet cable to connect an IP-based network to the
LAN port.
MIC
Name
Function
(1) Mute
Mute/Unmute the Mic. Blue: Unmute; Red: Mute
(2) MIC OUT Port
Outputs audio signal from the MIC to main system.
(3) MIC IN Port
Receive audio signal from the second MIC and pass it through the MIC
OUT to the main system.
5
CAMERA
Name
Function
(1) IR Sensor
Receive IR signal from the remote control for system operation. Amber
light blinks when it detects key pressing event from remote.
(2) CAMERA OUT Port
Connect the camera cable to the CAMERA OUT port located on the back
of camera and CAMERA IN port located on the back panel of main
system for a video transmission.
6
REMOTE CONTROLLER
The remote controller requires two “AAA” batteries (included). Make sure the batteries are installed
properly before using the remote controller. Aim the remote controller at the infrared sensor of your
Aver EVC camera to remote control the unit.
The remote controller included is only available for EVC-Series.
Name
Function
(1) Info
Press this button to display the call statistics
information.
(2) Power
Press this button to power on/off the main
system.
(3) Numeric Pad
Use to enter alphanumeric. Press button
and hold can switch between numeric mode
and alphanumeric mode.
(4) Keypad
In enter mode, press this button to display the
on-screen keyboard.
(5) Phone Book
a. Search contacts to make a call.
b. Add, edit, delete or create group contact
entries.
(6) Delete
Press this button to back delete one character
at a time.
(7) Call
Start a call.
(8) Home
Bring up the main screen.
(9) Hang up
End the call.
(10) Help
In Home menu and video screen mode, press it
to display on-screen help information.
(11) Back
Return to previous OSD menu.
(12) Navigation
Buttons
(, , , )
a. Use these buttons to navigate through the
selections in OSD menus or on-screen
keyboard.
b. Pan and tilt the camera to adjust the
viewing.
c. Pan, tilt the zoomed in camera image or
captured image.
(13) Enter
a. Make a selection in OSD menus.
b. Accept incoming calls.
c. Display the site name and icon during the
meeting.
d. Auto Focus function(PTZ camera only)
(14) Far/Near
Select to control either near site or far site
camera. The cam ctrl icon will appear on the
screen to indicate which site’s camera you are
7
controlling. The cam ctrl icon will disappear
after press the Far/Near key 5 sec.
(15) Input
Switch the OSD menu display on VGA or HDMI
monitor (dual monitor).
Name
Function
(16) Zoom +/-
Increase/decrease the camera zoom or the
captured image magnifications.
(17) Vol +/-
Increase/decrease the speaker volume.
(18) Mute
Muto/Unmute the MIC. The mute icon will
appear when the MIC is muted. The mute icon
will become translucent after enabling 5 sec.
(19) Record
Only support for
EVC130.
Start/Stop video recording. The video recording
can only be saved to a USB flash drive. You do
not need to be on a video conference to record.
(20) Presentation
Share the content that comes from either the
VGA IN port source or the latest captured
image. The present icon will appear on the
screen when the presentation function is
enabled. The icon will disappear after 5 sec.
(21) Layout
Change the screen layout.
(22) Aver Point
Aver Point To be developed.
(23) Preset
a. Press and hold for 3 sec. to set the position
of the camera to a preset from 0~9.
b. Press to move the camera to a selected
preset point number.
(24) Snapshot
Capture the image from the camera (OSD
menu is not included) and save to external USB
pen drive.
(25) Dual
Switch to dual screen mode. This splits the
video conferencing screen and present screen
onto two separate monitors (two monitors must
be connected to use the feature, one through
HDMI and one through VGA).
Press and hold can switch to OSD menu
between primary and secondary screen.
8
Connections
Before making the connections, make sure all devices are powered off. Refer to the illustrated
connections below and also to the user manual of the device you are connecting to the AVer
EVC-Series system.
LCDTV
AUDIOINRAUDIOINL
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
RJ-45 Wall jack
RJ-45 cable
3.5mm
Audio cableVGA cable
VGA cable
Laptop PC
LCD monitor/LCD TV
LCD/DLP projector
Wall outlet
Power cord
Power adapter
USB
Camera cable
Camera
3.5mm to
RCA cable
HDMI cable
MIC cable
MIC
HDMI monitor
Make sure all connections have been connected successfully before powering on the system.
9
CONNECTING MONITORS (VGA OUT/HDMI OUT)
Locate the VGA/HDMI input port of the graphics display device and connect it to VGA OUT/HDMI
OUT port of the AVer EVC with the supplied VGA/HDMI cable. You can configure the VGA OUT and
HDMI OUT ports at the same time upon a dual screen configuration.
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
VGA cable
LCD monitor/LCD TV
LCD/DLP projector
HDMI cable HDMI monitor
CONNECTING THE CAMERA (CAMERA IN)
Locate the port on the back of the camera and connect it to the CAMERA IN port of the EVC with the
supplied camera cable.
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
Camera cable
Camera
10
CONNECTING THE MIC (MIC IN)
Use the supplied MIC cable and connect the red tag connector to the MIC IN port of the EVC. Then
connect the other end of the MIC cable with the blue tag to MIC OUT port.
Press the button on the top of AVer EVC-MIC to mute/un-mute the MIC.
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
MIC cable
MIC
CONNECTING THE LAN (RJ-45)
Connect the LAN port of AVer EVC to a RJ-45 wall jack or Ethernet hub with the supplied RJ-45
cable.
It is requires an IP-based network before beginning LAN connection.
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
RJ-45 Wall jack
RJ-45 cable
11
CONNECTING THE POWER (DC 12V)
Connect the power adapter to a standard 100V~240V AC power outlet with the supplied power
adapter and power cord.
(1) To prevent shock, make sure all the connections on the main system are connected
successfully before connecting the power cable and turning on the power.
(2) Make sure to use the supplied available power adapter.
AUDIO OUTVGA OUTCAMERA INDC 12V HDMI OUT VGA IN AUDIO IN
Wall outlet
Power cord
Power adapter
CONNECTING PC (VGA IN)
Locate the VGA output port of the Laptop or Desktop and connect it to VGA IN port of EVC with the
supplied VGA cable for an image display.
To share the video signal from the computer, press PRESENT and select “VGA”.
12
CONNECTING THE AUDIO (AUDIO IN/OUT)
AUDIO IN:
Locate the AUDIO output port of the Laptop or Desktop and connect it to AUDIO IN port of AVer EVC
with the supplied 3.5mm Audio cable.
AUDIO OUT:
Locate the AUDIO in port of the LCD TV speaker or normal speaker and connect them to AUDIO OUT
port of AVer EVC with a RCA cable.
13
USB STORAGE (USB PORTS)
EVC main system supports two USB2.0 interface for saving data. One is located on the front panel of
main system; another is located on the back panel.
[Note] The USB ports only support USB pen drive for F/W upgrading and saving log file; they DO
NOT supply 5V power for any external devices.
Front Back
14
Before Installation
This chapter explains the best way to position EVC-Series in a conference room.
Using the Camera
EVC100/130 with a detached camera that can pan (+-100 deg range), tilt (+-25 deg range) and
zoom (4X digital) by using the , , , and zoom +/- buttons on remote controller.
EVC130P with a detached camera that can pan (+-100 deg. range), tilt (+-25 deg. range) and
zoom (16x Optics) by using the , , , and zoom +/- buttons on remote controller.
EV150 with a detached camera that can pan (+-130 deg. range), tilt (+90/-25 deg. range) and
zoom (18x total zoom with 12x Optical, 1.5x Digital zoom) by using the , , , and zoom
+/- buttons on remote controller.
Avoid physically turn camera while system is powered on to prevent permanent damaging the
motors and gears and void the warranty. Always use the remote control to pan and tilt the camera
head.
Infrared Sensor (IR)
Aim the remote controller at the camera infrared sensor to operate the unit.
15
Positioning the MIC
The best distance for EVC-MIC to receive audio signal is within 3m.
Single Microphone
Two Microphones
16
AVer EVC Wizard Setup
For the first time using AVer EVC system, the Installation Wizard will guide the user to setup EVC
system step by step. After completing the wizard setup, user may start to use the EVC system.
In Installation Wizard, user can use the following buttons on remote controller to move between the
selections and make/confirm selection.
: To expand the drop-down list, make/confirm the selection.
/ : Move the cursor up or down.
: Move the cursor to right or on Next button.
: Move the cursor to left or on Back button.
START
Please follow the below description to complete the wizard setup.
Connect your EVC system well and turn on the
power. After your EVC system starting, user will
see the Installation Wizard screen shown up.
If you want to skip the Wizard setup, press
button move to Skip button and press to go
to Home page.
17
LANGUAGE
Select the language of the EVC system.
Press to expand the drop-down list. Then,
use or button to move the selection and
press to make the selection. After selecting,
press to move to Next option and press
to go next step.
SITE NAME
Assign a name for EVC system. Use the numeric pad on remote controller to enter the site
name.
After entering the site name, press to move to
Next button and press to go next step.
To go back to last step, press to move to
Back option and press to confirm.
[Note]
(1) Repeat press the number button to select the
character that user wants to enter.
(2) The site name is character only
NETWORK SETTING
Select the network environment that user has used.
Use or button to move to the selection
and press to confirm the selection.
[Note] User can refer to chapter of Scenarios For
LAN Connection for the description of network
environment.
After selecting the network setting option, user
need to configure the network parameters. Follow
the below description to setup the network
settings.
18
PUBLIC IP CONFIGURATION (OUTSIDE OF FIREWALL):
Your EVC system is connecting directly to the internet. Select the IP mode.
Obtain IP address by DHCP: Configure the system to automatically obtain an IP address from the
DHCP server. The EVC system will automatically get a IP address which assigned by your DHCP
server on LAN. The IP address and related information will display. Click OK to accept the setting.
Static IP: Configure the system to use the assigned IP address. Select this when the public IP
address is available.
Enter the following information and click Apply to save the settings. To go to next step, click Next
and click Back to go back to Network Setting page.
1. Your IP Address is: Enter your IP address
manually.
2. Subnet Mask: Enter the subnet mask address
when the system does not automatically
obtain the subnet mask
3. Default Gateway: A gateway is a network
point that acts as an entrance to another
network. Enter the gateway address when the
system does not automatically obtain the
gateway.
4. Preferred DNS Server: Domain Name
System (DNS) servers convert human friendly
names (for example: www.example.com) to IP
addresses (218.77.272.166) that let machines
be found on the network. The preferred DNS
server is the one your computer asks first. The
alternate is a backup. Enter the Preferred and
Alternated DNS Server address.
5. Alternate DNS Server: Enter another Domain
Name server for second choice.
IPv6: IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4 for
some time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by colons.
19
Select and enter the following information and click Apply to save the settings. To go to next step,
click Next option and click Back to go back to Network Setting step.
1. Obtain Address is
(1) Static IP: Configure the system to use
the assigned IP address. Select this
when the public IP address is available.
(2) Auto: Obtain the dynamic IP address
automatically. User needs to enter the
IP address and prefix length in
following.
2. Your IP Address is: Enter your IP address
manually.
3. Prefix Length: Prefix Length allows you to
place as many IPv6 devices as the underlying
network medium allows.
PRIVATE IP CONFIGURATION (BEHIND FIREWALL PORT FORWARDING):
Your EVC system is connecting to the internet through a firewall.
Please make sure you have set the following ports in port forwarding in your firewall. Then, click
Next to select the IP mode of your network
Obtain IP address by DHCP: Configure the
system to automatically obtain an IP address from
the DHCP server. The EVC system will
automatically get a IP address which assigned by
your DHCP server on LAN. The IP address and
related information will display. Click OK to accept
the setting.
Static IP: Configure the system to use the assigned IP address. Select this when the public IP
address is available.
20
Enter the following information and click Apply to save the settings. To go to next step, click Next
and click Back to go back to Network Setting page.
1. Your IP Address is: Enter your IP address
manually.
2. Subnet Mask: Enter the subnet mask address
when the system does not automatically
obtain the subnet mask
3. Default Gateway: A gateway is a network
point that acts as an entrance to another
network. Enter the gateway address when the
system does not automatically obtain the
gateway.
4. Preferred DNS Server: Domain Name
System (DNS) servers convert human friendly
names (for example: www.example.com) to IP
addresses (218.77.272.166) that let machines
be found on the network. The preferred DNS
server is the one your computer asks first. The
alternate is a backup. Enter the Preferred and
Alternated DNS Server address.
5. Alternate DNS Server: Enter another Domain
Name server for second choice.
IPv6: IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4 for
some time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by colons.
Select and enter the following information and click Apply to save the settings. To go to next step,
click Next option and click Back to go back to Network Setting step.
1. Obtain Address is
(1) Static IP: Configure the system to use
the assigned IP address. Select this
when the public IP address is available.
(2) Auto: Obtain the dynamic IP address
automatically. User needs to enter the IP
address and prefix length in following.
2. Your IP Address is: Enter your IP address
manually.
3. Prefix Length: Prefix Length allows you to
place as many IPv6 devices as the underlying
network medium allows.
SIP SETTING
21
Session Initiation Protocol (SIP) allows you around the world to communicate using your
supported devices over the Internet. After setting network, user can choose to setup SIP or
Skip SIP setting.
To setup SIP, enter or select the following information
1. SIP Site Name: Enter the SIP site name for
others to identify. The SIP site name may be
the same or different then the domain for Web
activity. Use numeric pad to enter the SIP site
name in column.
2. Internet Protocol: Select to use IPv4 or IPv6
as IP protocol. Press to expand
drop-down list and use , to move the
selection. Press to confirm the selection.
3. SIP Transport Protocol: Select the SIP
Transport Protocol type from the drop-down
list for using. There are two types of Internet
Protocol (IP) traffic. They are Transmission
Control Protocol (TCP) and User Datagram
Protocol (UDP). To ensure proper connection,
verify if both calling parties are using the same
transport protocol. By default, it is set to UDP.
(1) TCP: TCP is connection oriented. Once a
connection is established, data can be sent
bidirectional.
(2) UDP: UDP is a simpler, connectionless
Internet protocol. Multiple messages are
sent as packets in chunks using UDP.
4. SIP Port: Change this value only if you use
specific settings in your network system. By
default, the SIP port is set to 5060.
5. STUN Server: STUN (Session Traversal
Utilities for NAT) is a standardized set of
methods and a network protocol to allow an
end host to discover its public IP address if it
is located behind NAT.
6. STUN Port: Enter the port number of STUN
server.
22
SIP SERVER REGISTRATION
A typical SIP session involves a client requesting a session with a SIP server. After the request is
received, the SIP server returns a response to the user indicating the availability of the session.
After setting SIP, user can choose to setup SIP Server Registration or Skip.
To setup SIP Server Registration, enter the following information and click Register to save the
settings. After completing, click Next to go next step.
1. Terminal Name: Enter the terminal server
name.
2. Terminal Password: Enter the password of
terminal server.
3. Registrar Server: Registrar Server accepts
registrations from users and places these
registrations, (which is essentially location
information), in a database known as a
location service. Enter the Registrar Server
name that you want to use.
4. Proxy Server: Proxy Server is computing
device (typically a server) that interfaces
between data processing devices and others
within a communications network. These
devices may be located on the same local
area network or an external network. Enter the
used Proxy Server name.
23
DATE AND TIME SETTING
Setup the EVC system date and time. User can choose to use NTP server to adjust the date/time or
manually enter the current date/time.
NETWORK TIME PROTOCOL (NTP)
Network Time Protocol (NTP) is a protocol that is used to synchronize system clock times in a
network of device.
1. NTP Server: The Network Time Protocol
(NTP) allows administrators to synchronize all
network computers to a main server. This
keeps all network machine clocks on the same
time. Enter the NTP Server name that you
want to follow.
2. Time Zone: Timezone allows you to adjust the
time when you are in a different country or
area so that you can keep the same time with
your original area. Most of the time zones on
land are offset from Coordinated Universal
Time (UTC) by a whole number of hours
(UTC-12 to UTC+14)
MANUALLY SETTING
Enter the present year, month, date, hour, minute, and second by yourself
After completing date/time setup, click Finish to
complete the Installation Wizard setup. Before
that, user can back to previous page or go to
home menu. How to dial a call; refer to chapter of
Making a Call.
24
Aver EVC OPERATION
Connecting the camera, microphone, main system, display and power, press the power button to turn
on EVC. Power button starts blinking blue light, Aver logo shows up followed by an animation and
music. In 30 seconds camera image and home screen appear on screen. Aim the remote controller to
camera and start configuring AVer EVC.
Before You Begin
Basic Operation
Navigation buttons: Use the , , and buttons to move the selection on the remote
controller.
Enter button: Use the to confirm the selection on the remote controller.
Apply: Make the changed value to take effect. (For AVer EVC Application)
Save: Accept the created value and save it to the system.
Cancel: Cancel the changed value and exit the present screen.
Home Screen
There are 4 selections on the Home screen: Dial, Phonebook, Call History, and Setting. Simply use
the navigation buttons to move between selections and press to confirm the selection. You can
easily place a call and select the site contact either in Dial, Phonebook or Call History. The
administrator can set a security password to prevent changes made to the system setting and
WebTool access.
CONFIGURATION ICONS
Dial, Phonebook and Call History
Settings include General Setting, Video/Audio
and Network.
25
CAMERA AND MIC ICONS
On the upper left-hand corner of your home
screen, you may see camera and MIC
indications.
If the Camera connection is ok, is on the
upper left corner of your home screen.
Otherwise, “Camera Disconnected” warning
message is displayed and screen is blue.
If the MIC connection is ok, is on the upper
left corner of your home screen. Otherwise,
is displayed indicating microphone is mute.
Try pressing the mute button on microphone or
remote controller to unmute it (LED indicator on
microphone turns blue).
WAN ADDRESS
On the lower left corner of your home screen,
you can find current WAN IP address.
REAL-TIME CLOCK
On the lower right corner of your home screen,
you can find the current Date and Time once
system sets up properly.
26
SYSTEM INFO
Press (Info) button to switch to system
information page.
The System Info shows you the relative
information about your EVC main system
including Site Name, Model name, Maximum
Allowable Sites, IP Address, MAC Address and
System Version.
Also, you can view call status while call is
connected.
1. Make a call.
2. When call is connected, press (Info)
button.
3. Select the call and you should see the current
call status.
Dial
Dial selection allows you to enter dial screen and
make a call.. Press button on the remote
controller has the same effect.
27
Call to
Use the number keys on the remote controller
to enter the IP address or number or SIP URI
(sip:username:password@host:port) you want
to call. AVer remote controller supports
alpha-numeric operation, press numeric key
multiple times to select the alphabet or
symbol.
[Note] Press button and hold can switch
between numeric mode(123) and
alphanumeric mode(ABC/123).
Call Type
AVer EVC supports H.323 , SIP, and SIP Only
Voice calls. H.323 is commonly used to
communication to other videoconferencing room
systems. SIP is commonly used to communicate
with other VoIP devices. SIP Only Voice is used
when other conference site could not recognize
EVC video code, only transfer voice Use the
button to select which type of call type you want
to make then press to confirm.
[Note] H.322 and SIP call type can be existed in
a same conference call meeting.
Call Quality
For the Call Quality selection, enter the desired
call quality (or network bandwidth) from the
drop-down list (default or 64K up to 4M bit per
second).
28
Select the “Call” on the Dial configuration
screen then press to make a call.
Make sure the network jack is plugged in and
network is working properly before making a call;
otherwise, the “Network Jack Unplugged”
information will appear. Click “OK” to reconfirm
the network connection.
29
Phonebook
Phonebook allows you to create and edit contact
information, group contacts by category, search
contacts then make a call. The group and
contact (site) name in the directory will be sorted
in alphabetical order. You may use the WebTool
to edit or import the phonebook entries too.
GROUP
Select Phonebook and press .
Select Group and press .
If you have lots of contacts, it is better to
categorize them to groups such as client,
vendor, company, branch, etc. to make the
lookup easier.
Create a New Group
In the Group configuration screen, Press
“Red” button on the remote controller to
pop up the “Input Group Name” dialogue
box.
30
Enter the group name that you want to create.
Select “Save” to save the new group. Or
select “Cancel” to exit the “Input Group
Name” dialogue box.
The new group name will be saved and
displayed in the group list.
Search a Created Group
Press “Yellow” button on the remote
controller and enter the group name that you
want to search.
31
If the name you enter has not been created,
the system will show you “No Group
Available”, please search again.
If the Group data are over one page, you can
also press “Green” button or “Blue”
button to Page Up or Page Down.
Edit Group
Select Phonebook│Group and press .
Select the name you want to modify in the
group list.
Select “Edit Group” and press .
Modify the group name and select “Save” to
save the revised group name.
32
The revised group name will be saved and
displayed in the group list.
If the revised name is the same as
Add Contact from Group List
Select Phonebook│Group and press .
Select the Group name you want to add to
Contacts List.
Select “Edit Group” and press .
Confirm the Group Name what your want to
add to the contracts list and then select
“Contacts List”.
33
In the Group Site list, select the item that you
want to add to the contracts list and then press
“Red” button on the remote controller to
save the selection.
Select “Save" to save the Group name and
added site to the contacts list.
The selected Group name and added site will
be added into the contacts list.
Delete Group
Select Phonebook│Group and press .
Select the name you want to remove in the
group list.
Select “Delete Group” and press .
34
Select “Yes” to remove the selected group
name and “Cancel” to cancel group name
deletion.
The selected group name will disappear in the
group list when deleted.
NEW SITE (CONTACT IN PHONEBOOK)
New Site allows you to create and edit the information to each site.
Add New Site
Select Phonebook │New Site and press
.
Select the Group name, if you don’t want to
add the entry into a group, please select
“Non-Group” item.
Select Site Name box. Enter the site name
with the remote controller and press .
Enter the used call type information either
H.323 or SIP.
35
Select the desired call quality value in the
drop-down list.
Select “Save” to store the newly added site
contact.
Edit New Site
Select Phonebook│Contacts List and press
.
Select the contact you want to modify and
press .
Select “Edit Site” and press .
In the Edit Site screen, you many change the
Group name, Site Name, H.323. SIP and Call
Quality.
After making the changes, select “Save” to
apply the new changes or “Cancel” to reserve
the original settings.
36
The saved changes will be shown in the Group
Site list.
Delete New Site
Select Phonebook│Contacts List and press
.
Select the contact you want to delete and
press .
Select “Delete Site” and press .
Select “Yes” to remove the selected contact
and “No” to cancel contact deletion.
The selected contact will disappear in the
Group-Site list when deleted.
37
CONTACTS LIST
Contacts List shows you all of the contacts
that you have created and saved. You can
select the contact from the Contacts List
directly for modifying or deleting. In the
Contacts List configuration screen, you can
also use the “Yellow” button on the
remote controller to search the contact that
you want. If the Group-Site over one page, you
can also press “Green” button or “Blue”
button to Page Up or Page Down.
FAVORITE
AVer EVC allows you save up to 10 most used contacts in the favorite list.
Select Phonebook │Favourite and press
.
Select which line (0~9) do you want to save
the favorite contact and press .
Select the contact from the pop-up Group Site
list and press “Red” button on the remote
controller to save the selection.
The item selected will be added into favorite
list.
38
ONLINE PHONEBOOK
View the phonebooks are downloaded from
LDAP server.
39
Call History
The Call History allows you to check the
incoming/outgoing calls made and their status.
You can also make a call by selecting it in the
Call History list.
Call Status
Select Call History and press .
The Call History will show you the IP address or
the Site name with call type, Call Date/Time,
Duration, and Call status. Refer to the table
below to check the call status.
Call Status
Answered
Failed
IN
OUT
Make a Call From the Call History
Select Call History and press .
Use the and buttons to move the
selection and scroll up and down in the call
history list.
Press and select “Call” to make a call.
Or press button on the remote controller
to make a call.
40
The call will be connected.
Make a Contact from the Call History
You can also save the call in/out information into your contacts list.
Select Call History and press .
Use the and buttons to move the
selection and scroll up and down in the call
history list.
Press and select “Save” to pop-up contact
editing form. All relative information has filled in
the contact form already based on the selected
call entry from the Call History.
Confirm the Group selection then select “Save”
to save the call entry into your contact.
41
General Setting
The General Setting allows you to modify system
setting, check the system info, test the system
and watch recorded conference files.
CALL SETTINGS
Call Setting allows you to enter or change your system’s site name which will appear on the screen
during the call session for the other party to identify you. Set the system to enable/disable auto
answer, set the default call quality, and enable/disable Advanced Encryption Standard which ciphers
the data to protect against unauthorized data access.
Auto Answer
Select General Setting│Call Settings and press
.
Select Auto Answer and press . In the
Auto Answer drop-down list, select “OFF” to
turn off Auto Answer. “ON” to answer the call
automatically, “ ON with Mic Mute” to
automatically answer the call without
microphone on, and “Do Not Disturb” to
automatically reject incoming calls. If you are
already in a conference, even if the Auto Answer
is turned on, you also need to accept the next
call manually.
42
Default Call Quality
EVC main system supports 64k, 128k, 256k,
384k, 512k, 768k, 1024k, 1152k, 1472k,
1536k, 1920k, 2048k , 3072k, 4096k selection
for default call quality. By default, it is set to
512k.
Enable/Disable AES
Advanced Encryption Standard (AES)
encrypts the data that is being transmitted
during a video conferencing to provide
protection against unauthorized data access.
Encrypted data can only be read with the
device that also supports the AES standard. All
parties on the call must support AES to use
this feature, or else the data will not be
encrypted.
Select General Setting│Call Settings and
press . Select the Enable AES check box
to active this function.
This function may be restricted and unavailable in some countries.
43
Enable/Disable QoS
Quality of Service (QoS) provides different
priority data flows to guarantee a certain level
of performance in video conferencing data
flow. To activate QoS, select General Setting
│Call Settings and press . Select the
Enable QoS check box to active this function.
By default, this function is disabled.
Show Call Duration
Enable/disable the call duration showing, by
default, this function is enabled.
Max. Transmitting/Receiving Bandwidth
This function allows you to specify the
maximum bandwidth of the outbound and
inbound calls. Aver EVC system supports up to
4Mb.
44
SYSTEM SETTINGS
System Settings allows you to set Language, the time for Auto Power off and enable/disable Keypad
Tone function for your main system.
Site Name
Select General Setting│System Settings and
press . The site name is represented as
name of this EVC system. Enter the site name
as you wanted.
Language
Select General Setting│System Settings and
press .
EVC main system supports up to 22 languages
for your selection. Select the language from
the drop-down list directly and the language for
the system will turn into the selected language
automatically.
45
Auto Power Off Mode
Auto Power Off Mode allows you to set the time to power off your system automatically after idling.
Select General Setting│System Settings and
press .
Select the time from the Auto Power Off
Mode drop-down list (OFF/30Minutes/
1Hour/2Hours/3Hours/4Hours). Disable this
function, please select “OFF”. The function will
completely turn off the system once you have
set the auto power off time. To turn on the
system you need to press the Power button on
the man unit again.
Keypad Tone
Keypad Tone allows you to enable/disable tone sounds when you are dialling a number using the
remote controller.
Select General Setting│System Settings and
press .
Select the Keypad Tone check box to enable
the tone sounds. By default, this function is
enabled.
46
ADMINISTRATOR
Enable Web Admin
Select General Setting │Administrator and
press .
Here allows you to enable administrator
authority of Web Tool. When you access to
Web Tool, a password is required. The default
password is “1234”.
Enable Admin
Select General Setting │Administrator and
press .
Here allows you to enable authority of system
administrator. When you want to setup
system, a password is required. The default
password is “1234”.
Change Admin. Password
Select General Setting │Administrator and
press .
Here allows you to change password of
system administrator.
47
Enable VCLine/ScreenShare
Select General Setting │Administrator and
press .
Here allows you to enable function of VCLink
and ScreenShare.
Change VCLine/ScreenShare Password
Select General Setting │Administrator and
press .
Here allows you to change password of
VCLink and ScreenShare. The default
password is “1234”
Save System Log
If you encounter unknown issues and are unsure of how to troubleshoot the unit, sending us the
saved system log data to help us solve your problem faster.
Insert a USB Flash drive into the USB Port of the EVC main system. (Either on the front panel or back
Panel)
or
48
Select “Run” located next to “Save System
Log” to save the system log into your USB Flash
drive.
After the file is saved, select “OK”. Remove the
USB Flash drive and insert it into your
computer’s USB port. Located the file
message.tar.gz and send it to the technical
support team.
Firmware Update Notice
Select this function check box to enable firmware
updated notice function. By default, this function
is enabled.
Far End Camera Control
Select the “Far Control of Near Camera” check
box to enable the far site to control your camera.
By default, this function is enabled.
49
Wake-On-LAN (WOL)
Wake-on-LAN is an Ethernet computer
networking standard that allows your computer
to be turned on or awakened by a network
message. By default, this function is disabled.
MONITOR
EVC main system allows you to connect dual monitor. In the Monitor configuration screen, you can
configure the Aspect Ratio and Screen Saver to each monitor.
Select General Setting│Monitor and press .
Select the Monitor Aspect Ratio (Auto/4:3/16:9)
that you want from the drop-down list and press
. If you want the system to detect the right
setting automatically, please select “Auto”.
50
Select the Screen Saver time (OFF/10
Minutes/20Minutes/30Minutes/60Minutes) from
the drop-down list and press . You can
select “OFF” to disable this function or define a
standby mode time.
The screen will turn black when the system is in standby mode. Press any button on the remote
controller to wake up the system.
TV Underscan
For older type TVs/CRT monitors, this function
can help to auto adjust screen view when the
GUI is exceeded the monitor view range.
51
DATE AND TIME
Date and Time allows you to set the Date and Time formats, adjust the time setting and change the
Time zones around the world and countries.
Date Format
Select General Setting│Date and Time and
press .
Select the Date Format (yyyy-mm-dd/
mm-dd-yyyy/dd-mm-yyyy) you prefer from the
drop-down list.
Time Format
Select General Setting│Date and Time and
press .
Select the Time Format (24-hour/12-hour) you
prefer from the drop-down list.
52
Enable NTP
Network Time Protocol (NTP) is a protocol that
is used to synchronize computer clock times in a
network of computers. Select the Enable NTP
check box to make your computer time the
same as the network time.
NTP Server
The Network Time Protocol (NTP) allows
administrators to synchronize all network
computers to a main server. This keeps all
network machine clocks on the same time.
Enter the NTP Server name that you want to
follow.
Timezone
Timezone allows you to adjust the time when
you are in a different country or area so that you
can keep the same time with your original area.
Most of the time zones on land are offset from
Coordinated Universal Time (UTC) by a whole
number of hours (UTC-12 to UTC+14).
53
Year and Hour
Enter the date and time including year, month,
day, hour and minute that you want to show on
the present system.
Select “Apply” to active your settings.
RESET SYSTEM
The Reset System allows you to reset your main
system to factory settings, which will clear
phonebook entries and call history. Make sure
to back up the information before resetting the
system.
54
Default Setting Reset: LAN configuration,
video/audio codec selection, call settings and so
on will be reset. Click “Yes” to reset your system
to factory default values.
Clear Phonebook: All the phonebook entries
saved in the system will be deleted.
Click “Yes” to delete all content of your
phonebook.
Clear Call History: All the incoming and
outgoing call records will be deleted. Click “Yes”
to delete all calling information of the call
history.
55
DEFAULT LAYOUT
You can select the layout for call conference.
There two type of layout – Layout without
content and Layout with content.
Layout without content: Only display call
video, no content share screen.
There 4 layouts can be chosen. During the call
conferencing, the display layout will be the
layout that you has chosen.
Layout with content: display call video and
content share screen.
There 6 layouts can be chosen; but only 2
layouts include content share screen. During the
call conferencing, the display layout will be the
layout that you has chosen.
56
PIP Display Time: When conference call is
connected, screen is displayed in PIP mode.
You can manually setup PIP mode display time.
The default is 5 seconds.
Video/Audio
In Video/Audio configuration screen, you can
set the MIC gain level, select the preferred video
and audio codecs and adjust the camera
functions.
CAMERA
Camera allows you to set the White Balance, Exposure and Frequency for your camera.
White Balance
Whit balance is a camera setting that adjusts for lighting in order to make white objects appear white
in photos.
57
Select Video/Audio│Camera and press .
Select the White Balance type from the drop
down list. EVC main system supports up to 5
types of white balance for your selection.
Auto: Most cameras default to automatic white balance. It makes white objects bright white and alter
all the other colors to match.
Cloudy: You can use the Cloudy white balance setting instead of auto on a cloudy day. This allows
the camera to compensate for blueness in the shadows, warming up the scene to better match what
your eye would see.
Daylight: You can use Daylight settings only when shooting in very bright sunlight, as it can produce
bluish results on overcast days.
Fluorescent: You can use Fluorescent setting to cancel out the green or blue cast, which can
produce sickly-looking results on human skin.
Tungsten: This setting assumes a color temperature of around 3,200k and is suitable for most
tungsten lamps that normally emit a yellow light. This is usually used to correct for the same color cast.
Exposure
A photograph’s exposure determines how light
or dark an image will appear when it is been
captured by your camera. Select the exposure
level you prefer from 1 to 9 or auto.
58
Frequency
Select the correct frequency setting
(Auto/50Hz/60Hz/OFF) form the Frequency
drop-down list.
Sharpness
Adjust camera sharpness. The more sharpness
the screen image more easy has noise.
Camera Upside-down
When camera is handed at up-side-down
position, enable Camera Upside-down to flip the
image view.
59
Enable Auto Focus
Enable/disable auto focus function.
Scene Mode
Standard: No any effect adjustment on screen
view.
Moire-free: To reduce moire if moire screen is
happened.
60
MICROPHONE
EVC main system allows you to adjust the MIC Gain Level up to 9 for proper MIC volume to improve
audio reception on the microphone (s).
MIC Gain Level
Select Video/Audio │Microphone and press
.
Adjust the MIC Gain Level form the drop-down
list.
MIC Input Source
Select the source of the microphone from the
MIC in, Audio IN with AEC, or Audio IN without
AEC. If you connect a microphone in AUDIO IN
port, we recommend selecting Audio in
selection to avoid the echo issue.
Sending Audio Via Line-in to
61
Send the audio through the audio device that is
connected at audio input port of EVC to selected
site(far, near, or both).
If MIC Input Source is MIC in, you can choose
far, near or both site can hear the audio sound.
If MIC Input Source is Audio in, only “far site”
can be heard the audio sound.
[Note] When audio input port is connected with
audio device and enable “Sending Audio Via
Line-in to” function, the AVer MIC is disabled.
Broadcast Support(HDMI)
This function allows you to hear own talking
voice during video conferencing through the
stream media device that is connected on HDMI
port of EVC main unit.
In MIC Input Source, please select “MIC In”.
If the stream media device didn’t connect to
HDMI port of EVC main unit, it will cause
howling when voice come out from TV or
speaker.
62
VIDEO/AUDIO CODECS
You can specify the Video/Presentation/Audio Codecs in Video Codecs, Presentation Codecs, and
Audio Codecs configuration screens.
Select Video/Audio│Video Codecs for Video
Codecs configuration, Video/Audio │
Presentation Codecs for Presentation Codecs,
or Video/Audio │Audio Codecs for Audio
Codecs configuration and press .
Select the Video/Presentation/Audio Codecs
to specify the codecs you want to support. While
the EVC supports the H.323 standard coding
algorithm, each codec has unique properties
and performs best given a certain set of
circumstances.
For Video: H.261,H.264, H.263+, H.263,
H.264HP, H264SVC
[Note]
1. H.261 is always mark by default.
2. H.264SVC only work with AVer EVC system
and default is disabled.
For Presentation: H.263, H.263+, H.264,
H.264HP, H264SVC
For Audio: G.728, G.722.1C, G.722.1*, G.722,
G.711.
*:G.722.1/G.722.1C, licensed from Polycom®
Please contact system administrator if you have any question on these codecs.
63
Network
Network allows you to set the SIP Server,
Gatekeeper, Firewall and LAN
Configurations. Before configuring Network
and Firewall, please refer to page 69 –
Scenarios for LAN connection and follow the
instructions of your actual network connection
scenario.
LAN CONFIGURATION
AVer EVC supports IPv4 and IPv6 internet protocol for your configuration. IPv4 is the most widely
deployed internet protocol used to connect devices to the internet. IPv4 uses a 32-bit address scheme,
written in decimal as four numbers separated by periods. Each number can be zero to 255. For
example, 192.168.0.1 could be an IP address.
Select Network│LAN Configuration and press
.
Configure the following relative items to setup
the LAN Configuration.
64
IP Address Type
DHCP: Configure the system to automatically
obtain an IP address from the DHCP server.
Static IP: Configure the system to use the
assigned IP address. Select this when the public
IP address is available.
Your IP address is
Show the current IP address; enter into when
you need to configure your IP address manually.
Subnet Mask
Show the designated IP address routing prefix;
enter the subnet mask address when the system
does not automatically obtain the subnet mask
65
Default Gateway
A gateway is a network point that acts as an
entrance to another network. Enter the gateway
address when the system does not
automatically obtain the gateway.
Preferred/Alternate DNS Server
Domain Name System (DNS) servers convert
human friendly names (for example:
www.example.com) to IP addresses
(218.77.272.166) that let machines be found on
the network. The preferred DNS server is the
one your computer asks first. The alternate is a
backup. Enter the Preferred and Alternated
DNS Server address.
After finishing all settings, select “Apply” to
active the changed settings.
66
LAN CONFIGURATION (IPV6)
IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4 for some
time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by colons. An
example IPv6 address could be written like this: 300E:1389:3030:72EB:1D71:414B:1079:6AF3.
Some types of addresses contain long sequences of zeros that can be compressed (the address of
fc00:0000:0000:0000:0000: 0000:0000:0001 can be compressed to fc00::1.
Select Network│LAN Configuration (IPv6) and
press .
Configure the following relative items to setup
the LAN Configuration (IPv6).
IP Address Type
Static IP: Configure the system to use the
assigned IP address. Select this when the public
IP address is available.
Auto: Obtain the dynamic IP address
automatically.
67
Your IP Address is
Show the current IP address; enter into when
you need to configure your IP address manually.
Prefix Length
Prefix Length allows you to place as many IPv6
devices as the underlying network medium
allows.
After finishing all settings, select “Apply” to
active the changed settings.
68
ADVANCE NETWORK
Configure 802.1x and VLAN settings.
Select Network│Advance Network and press
.
EAP 802.1x
Enable 802.1x: Enable/disable 802.1x
protocol. IEEE 802.1X is an IEEE
Standard for port-based Network Access
Control (PNAC). It provides
an authentication mechanism to devices
wishing to attach to a LAN or WLAN.
Identity: Enter the ID for 802.1x
authentication.
Password: Enter 802.1x’s authentication
password.
Click Apply to save and active the settings.
VLAN
Enable VLAN: Enable/disable VLAN
function. A virtual LAN (VLAN) is
any broadcast domain that
is partitioned and isolated in a network at
the data link layer.
VID(802.1q): Enter port for VLAN.
Priority(802.1p): Assign VLAN packet’s
priority.
Click Apply to save and active the settings.
69
FIREWALL
Configure the following items to setup the Firewall.
Select Network│Firewall and press .
Configure the following relative items to setup
the Firewall.
TCP/UDP Ports
By default, the system communicates through
TCP/UDP ports in the range from 30000 to
30019. You can specify the range for your
specific network environment.
You must configure your firewall to allow inbound/outbound traffic through TCP ports 1720/1719 for
H.323 call setup.
70
Enable UPnP
Enable/disable UPnP function.
NAT Configuration
AVer EVC supports NAT systems that use the
internal IP addresses to communicate with other
devices outside the LAN.
NAT Public (WAN) Address
The NAT public address must be entered when
you enable the feature on NAT configuration.
71
SIP
Session Initiation Protocol (SIP) allows you around the world to communicate using your supported
devices over the Internet.
Select Network│SIP and press .
Configure the following relative items to setup the
SIP.
SIP Site Name
Enter the SIP site name for others to identify.
The SIP site name may be the same or different
then the domain for Web activity.
Internet Protocol
Select internet protocol check box to enable IPv4
or IPv6 protocol using.
72
SIP Transport Protocol
Select the SIP Transport Protocol type from the drop-down list for using. There are two types of
Internet Protocol (IP) traffic. They are Transmission Control Protocol (TCP) and User Datagram
Protocol (UDP). To ensure proper connection, verify if both calling parties are using the same
transport protocol. By default, it is set to UDP.
TCP: TCP is connection oriented. Once a
connection is established, data can be sent
bidirectional.
UDP: UDP is a simpler, connectionless Internet
protocol. Multiple messages are sent as packets
in chunks using UDP.
TLS: TLS is a cryptographic protocols designed
to provide communications security over
a computer network. SIP payloads will be
encrypted to prevent malicious or unwanted
modifications. NAT-traversal can be achieved by
TLS connections since SIP payloads will not be
altered by NAT-enabled routers
SIP Port
Change this value only if you use specific
settings in your network system. By default, the
SIP port is set to 5060.
73
Enable SIP
Select Enable SIP check box and press to
activate/deactivated using SIP.
BFCP
Enable presentation sharing function in SIP. It
allows you to share the presentation file screen
to other caller in video conference meeting.
If connection is not so stabled, use TCP mode
can offer a reliable connection to prevent
unexpected disconnection and behaviors due to
packet losses.
Enable SRTP
Through SRTP, RTP payloads will be encrypted
to prevent sniffer, and hence secure
communication between users.
74
STUN Server
STUN (Session Traversal Utilities for NAT) is a
standardized set of methods and a network
protocol to allow an end host to discover its
public IP address if it is located behind a NAT.
Enter IP address of SIP NAT traversal server.
STUN Port
Enter port number of STUN server.
Enable STUN Server
Mark to enable STUN server function.
75
SIP SERVER
A typical SIP session involves a client requesting a session with a SIP server. After the request is
received, the SIP server returns a response to the user indicating the availability of the session.
Select Network│SIP Server and press .
Configure the following relative items to setup
the Server.
User Name
Select Terminal Name and press to enter
user name.
76
Authorization Name
Select Terminal Name and press to enter
authorization name.
Password
Select Password and press to enter using
password.
Registrar Server
Registrar Server accepts registrations from
users and places these registrations, (which is
essentially location information), in a database
known as a location service. Enter the
Registrar Server name that you want to use.
77
Proxy Server
Proxy Server is computing device (typically a
server) that interfaces between data
processing devices and others within a
communications network. These devices may
be located on the same local area network or
an external network. Enter the used Proxy
Server name.
Account Active
Select Use Registrar check box and press
to activate/deactivated using Registrar.
78
GATEKEEPER
The Gatekeeper in AVer EVC serves the purpose of translating services from E.164IDs to IP
addresses in an H.323 network.
Select Network│Gatekeeper and press .
Configure the following relative items to setup
the Gatekeeper.
H.323 Name
Specify the name that gatekeepers and
gateways can use to identify this system. Enter
the name; the gatekeeper will use this name for
identification.
79
H.323 Extension
Enter a numeric value for the gatekeeper to
identify your system further.
Gatekeeper IP Address
Enter the IP address for the gatekeeper server.
Authentication
Select the “Authentication” check box to
activate gatekeeper authentication if gatekeeper
requires authentication.
User Name and Password: Enter the user
name and password for gatekeeper
authorization.
80
Connect to Gatekeeper
Select this check box to Activate/deactivate
gatekeeper.
Make sure to setup the Gatekeeper before setting up the Firewall.
Enable H.460 Firewall Traversal
If you want to enable the H.460 Firewall
Traversal, please set the following ports in port
forwarding in your firewall before start
installing your EVC.
Make sure your gatekeeper supports H.460 Firewall Traversal before enabling it.
81
TEST UTILITIES
Network Test
This feature tests the network ability between local and far site.
Select Network│Test Utilities and press .
Select Run to start testing.
Wait until it finishes the network test. The check
mark will appear if the network test is successful.
If it fails, save the report in a USB flash drive and
contact our technical support.
Test Command
To ping or traceroute the far site device.
Select Network│Test Utilities and press .
Select Test Command and press .
- Ping: Ping is used to test the reachability of
a host on an Internet Protocol (IP) network,
and to measure the round-trip time for
messages sent from the originating host to a
destination and echoed back to the source.
- Traceroute: traceroute is displayed the
route (path) and measuring transit delays
of packets across an Internet Protocol (IP)
network.
IP Address: Enter the IP address of device that
user wants to ping or traceroute.
Finally, select Run to start ping or traceroute.
82
Web Configurations
You can use the internet browser to access your AVer EVC system through a LAN RJ-45 cable to
setup a AVer EVC system remotely. You can also access the Phonebook to add, edit and delete
entries, view and download the call history, update the system, and restore your previous settings. For
web configurations, your AVer EVC system default IP address is: 192.168.0.1.
Please change your EVC’s IP address at the start.
Using the WebTool
Enter your EVC’s IP address in the URL field. Enable Web Admin setting must be activated and your
will need to enter admin password to long in.
In Web Tool login screen, user can select the Language of Web Tool and enter the password, click
Submit button to login.
Default password is 1234
83
After login, user should see the video screen of local site.
is indicated in background view mode. is indicated in live view mode.
Click icon can call out on-screen remote controller. You can use mouse to click the on-screen
remote controller to operate functions on WebTool.
Click button can switch to numeric pad and phonebook button.
Click button can switch back to navigation buttons.
84
In the WebTool page, you can access the following:
1. Phonebook
2. Dial
3. Call History
4. Video/Audio
5. General Setting
6. Network
You can use the mouse to click the specified icon for a selection.
Managing Phonebook
In the Phonebook page of WebTool, all functions are the same as your AVer EVC Application. One
different is the Upload/Download.
Edit and Save
1. Locate and open the file using MS Excel and
select Office XML Handler to create a
schema based on the XML source data.
2. Edit the file.
3. Make sure to save the file as XML Data so it
can be uploaded back to the system.
85
Download Phonebook Entries
Download allows you to download contact data from your AVer EVC system.
1. Click Phonebook│Upload/Download.
2. The saving Phonebook data from Aver EVC
system dialogue box will appear,
3. Click “Save” to save the file.
4. After saving, you have to re-arrange your
browser to update your WebTool Phonebook
so that it can be the same as your EVC
system.
Upload Phonebook Entries
Upload allows you to upload the data that you have edited or added from your WebTool to your AVer
EVC system.
1. Click Phonebook│Upload/Download
2. Click “Upload Phonebook” to upload edited or
added contents to your Aver EVC system
directly.
3. You can also click “Browser” to open the
Phonebook file .xml saved in your PC to upload
it to your Aver EVC system.
4. After completing upload, the contents of
Phonebook on your Aver EVC system will be
modified in time.
You can also download the phonebook entries and upload them to another AVer EVC unit.
Download Call History Entries
Download History allows you to download call history list from your AVer EVC system.
1. Click Phonebook│Upload/Download.
2. Click “Download History” to download call
history from to your AVer EVC system
directly.
86
LDAP Setting
Setup your LDAP server then download your online phonebook.
1. Click Phonebook│LDAP Setting
2. Enter the following information:
Server Address: Enter LDAP server IP
address.
Username: Enter username of LDAP
server.
Password: Enter password of LDAP
server.
Base DN: Enter LDAP object name / path.
After entering username and password
for authentication, it will start to search
from LDAP Base DN name / path.
Port: The port for EVC and LDAP server
to communicate. The default value is
389.
3. Click Apply to save the settings.
4. The download phonebook will be displayed in
“Online Phonebook” section.
Online Phonebook
To view the phonebook is downloaded from LDAP server. You can make a call directly and save into
contact list.
Click Phonebook│Online Phonebook.
87
General Setting
DUAL STREAM BANDWIDTH ADJUSTMENT
Adjust bandwidth of presentation and live video.
1. Click General Setting│Call Setting
2. Click and to adjust the bandwidth.
Update System
You can update the latest EVC firmware to your AVer EVC system from AVer EVC WebTool.
1. Click General Setting│System Update
2. Click “System Update”.
3. Click “Select” to browse and locate the
downloaded firmware file .dat.
88
4. Click “Submit” to begin the system update or Cancel to stop this operation.
WARNING! Please do not perform any operations during the updating process.
EZ Join
Easy for joining a MCU bridge or cloud call.
In Dial screen, you has option to create few entries for most commonly used bridge/cloud call. Those
entries are defined by a XML config file.
Please contact the AVer support team (http://www.aver.com/Technical-Support) to get the XML config
file.
You can modify sample XML to fit their environment, upload it by Web Tool.
Maximum can upload 7 XML files.
89
Video/Audio
Primary Input source
The default of primary input source is “Camera”. User can change the primary input source to “VGA”.
1. Click Video/Audio│Camera
2. Select “Primary Input Source” and select the input source(Camera or VGA)
90
Customized Logo and Boot Animation
User can change logo icon and boot animation file.
1. Please enter the following URL in your browser.
Http://EVC’s IP address/admin/customization/logo-manage.html
2. The customization screen will show.
3. Click “Upload” button and choose the logo/animation file. File for logo and animation are some
limitations:
- Logo file: file size is less or equal to 1MB and resolution is 132 x 55 pixels.
- Animation file: file size is less or equal to 5MB, file format is *.avi, and file time is less or equal
to 20 seconds. Please contact your local distributor/dealer to transfer your booting animation
file to the correct format files.
4. If you want to use the default logo and animation file, click Reset button.
91
Scenarios For LAN Connection
Public IP Configuration (Outside of Firewall)
Your EVC system is connecting directly to the internet.
1. From the remote press “Home”-> “ ” ->
“Setting”.
2. Press “ ” -> “Network”.
3. Press “LAN Configuration”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP” or “PPPoE”.
- Static IP: Input the “IP address”, “Subnet Mask”
and “Default Gateway”.
Static IP setting
92
- PPPoE: Input the PPPoE login “User name” and
“Password”.
5. Select “Apply” and press (Enter).
6. Press “Home” on the remote to return to the
home menu.
Press the (Call) button on the remote and you
are ready to make your first call.
93
Private IP Configuration (Behind Firewall with
Port Forwarding)
Please make sure you have set the following ports in port forwarding in your firewall.
Port
Function
Type
1719
Gatekeeper
UDP
1720
H.323 Call setup
TCP
30000~30019
Signalling and control for
audio, call, video and
data/FECC
TCP and UDP
80
HTTP Interface
(WebTool)
TCP
23
Telnet
TCP
5060
5061
SIP
TCP and UDP
TCP
Your EVC system is connecting to the internet through a firewall.
1. From the remote press “Home”-> “ ” ->
“Setting”.
2. Press “ ” -> “Network”.
94
3. Press “LAN Configuration”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP”.
5. Manually input the “IP address”, “Subnet Mask”
and “Default Gateway”.
6. Select “Apply” and press (Enter).
7. Press (Back) on the remote to return to
previous menu. (If you have H.323 ALG enabled,
skip to step 10).
8. In the same page, go to “Firewall” and press
(Enter).
9. Select “ON” in the NAT check box and enter the
IP address in the “NAT Public (WAN) address”
field.
10. Press the “Home” button on the remote to return
the home menu.
11. Press the Call button on the remote and
you are ready to make your first call.
95
H.460 Gatekeeper with Firewall Traversal
Your EVC system is connecting to the internet through a firewall and your have a Gatekeeper outside
the firewall.
1. From the remote press “Home”-> “ ” ->
“Setting”.
2. Press “ ” -> “Network”.
3. Press “LAN Configuration (IPv4)”.
4. And In the drop-down list “Obtain IP address”,
choose “Static IP”.
5. Manually input the “IP address”, “Subnet Mask”
and “Default Gateway”.
6. Select “Apply” and press (Enter).
7. In the same page, go to “Gatekeeper” and press
(Enter).
96
8. Enter the IP address of your Gatekeeper in the
“Gatekeeper IP Address” field and enable the
“Use Gatekeeper” check box.
9. Enable the “Enable H.460 firewall Traversal”
option.
10. Press the “Home” button on the remote to return
the home menu.
11. Press the (Call) button on the remote and
you are ready to make your first call.
Troubleshooting
Audio
1. Can’t hear the audio during a call
- Make sure the MICs are not muted.
- Make sure the MIC connections are properly connected as illustrated in the manual.
- Ensure proper volume level on the system.
2. The audio quality is poor
- Ensure the MIC is not damaged.
- Try to adjust the “Mic Gain Level”.
- Make sure the MIC is not facing the output speakers to prevent echo.
Video/Display
1. Video conference call is established but no video or voice.
- If you are connecting to Aver EVC with firewall, make sure you have done the port forwarding
correctly. For non H.323 ALG firewall, please set the NAT configuration and the WAN IP
address on Aver EVC system is entered.
- We suggest having a fixed public IP address for Aver EVC system. With Dynamic public IP
address, it will change after a certain period which depends on your local ISP.
- There is a routing issue if you installed two Aver EVC systems sharing one public IP address.
2. Unable to connect to other Video Conferencing systems.
- Check to see if you dial the correct IP address.
- Ensure the power status of the device from the other sited is on.
- Verify if the firewall blocks the inbound traffics from the other site.
- Verify if the other site rejected your Video Conferencing call.
3. Unable to see the OSD.
97
- Check to see if your cable is connecting correctly.
- Make sure your system and display are well-connected and then reboot your system. (Your
display should be switched on before you reboot your system.)
- Press “Dual” button on remote controller (User needs to keep pressing until OSD menu is
shown).
4. Why the content sharing is not 720p when the source is 720p?
- Aver EVC systems support up to 720p content sharing and default value is XGA. For a
16:9(720P) video display, you have to configure it by manually.
5. Why can’t I see the UI configuration screen after connecting the VGA cable and powering on Aver
EVC systems upon screen saver mode?
- Please plug and unplug the VGA connector again to re-connection the VGA cable.
Network
1. The LAN connection is fail.
- Make sure you have changed your default IP address. The default IP address is 192. 168.0.1,
in order not to conflict with other devices in the same LAN, please change your IP address at
the start.
2. Cannot open WebTool by IE9 and IE10.
3. Click (General Setting icon) in IE.
4. Select “F12 developer tools”.
98
5. Change Document Mode to Internet Explorer 9 standards.
6. Disable intranet sites in Compatibility View. Go to “Tools│Compatibility view settings”.
99
7. Unclick the checkbox “Display intranet sites in Compatibility View” and then click “Close”.
100
Others
1. Unable to connect the call and the “Call failed” error message appears on the screen.
- Ensure the IP address for the calling is correctly.
- Ensure the other end of your calling does not set their system to “Do Not Disturb” mode or pick
up the phone.
- Ensure you are not calling to a system that has already up to maximum call-in limitation.
2. Forget the administrator password.
- Please contact Aver technical support for assistance.
3. Unable to control the far end camera.
- Make sure the “Cam Ctrl” icon is positioned on the screen you want to control. Press
“Far/Near” button on the remote controller to switch to the desired screen.
- Make sure the far site has enabled the “Far Control of Near Camera” setting. To enable this
function, press “Home” button and got to Setting│System setting and then select “Far
control of Near Camera”.
4. Aver EVC cannot detect the USB device.
- Unplug and plug the USB flash drive again and wait for 10 to 15 seconds for the system to
re-detect the new USB device.
- We do not recommend using an external HDD; it may cause system errors or recording
failures.
Remote Control Battery Safety Information
1. Store batteries in any cool & dry place.
2. Do not dispose used batteries in domestic waste. Dispose batteries at special collection points or
return to stores if applies.
3. Remove the batteries if they are not in use for long period of time. Battery leakage and corrosion
can damage the remote control, dispose batteries safely.
4. Do not mix and use old and new batteries.
5. Do not mix and use different types of batteries: alkaline, standard (carbon -zinc) or rechargeable
(nickel-cadmium).
6. Do not dispose batteries in a fire.
7. Do not attempt to short circuit the battery terminals.
101
Limited Warranty
For a period of time beginning on the date of purchase of the applicable product and extending as set
forth in the “Warranty Period of AVer Product Purchased” section of the warranty card, AVer
Information Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to
AVer’s documentation for the product and that its manufacture and components are free of defects in
material and workmanship under normal use. “You” as used in this agreement means you individually
or the business entity on whose behalf you use or install the product, as applicable. This limited
warranty extends only to you as the original purchaser. Except for the foregoing, the Product is
provided “AS IS.” In no event does AVer warrant that You will be able to operate the Product without
problems or interruptions, or that the Product is suitable you’re your purposes. Your exclusive remedy
and the entire liability of AVer under this paragraph shall be, at AVer’s option, the repair or
replacement of the Product with the same or a comparable product. This warranty does not apply to (a)
any Product on which the serial number has been defaced, modified, or removed, or (b) cartons,
cases, batteries, cabinets, tapes, or accessories used with this product. This warranty does not apply
to any Product that has suffered damage, deterioration or malfunction due to (a) accident, abuse,
misuse, neglect, fire, water, lightning, or other acts of nature, commercial or industrial use,
unauthorized product modification or failure to follow instructions included with the Product, (b)
misapplication of service by someone other than the manufacturer’s representative, (c) any shipment
damages (such claims must be made with the carrier), or (d) any other causes that do not relate to a
Product defect. The Warranty Period of any repaired or replaced Product shall be the longer of (a) the
original Warranty Period or (b) thirty (30) days from the date of delivery of the repaired or replaced
product.
Limitations of Warranty
AVer makes no warranties to any third party. You are responsible for all claims, damages, settlements,
expenses, and attorneys’ fees with respect to claims made against you as a result of your use or
misuse of the Product. This warranty applies only if the Product is installed, operated, maintained, and
used in accordance with AVer specifications. Specifically, the warranties do not extend to any failure
caused by (i) accident, unusual physical, electrical, or electromagnetic stress, neglect or misuse, (ii)
fluctuations in electrical power beyond Aver specifications, (iii) use of the Product with any
accessories or options not furnished by AVer or its authorized agents, or (iv) installation, alteration, or
repair of the Product by anyone other than AVer or its authorized agents.
Disclaimer of Warranty
EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, AVER DISCLAIMS ALL OTHER WARRANTIES WITH
RESPECT TO THE PRODUCT, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
INCLUDING WITHOUT LIMITATION, SATISFACTORY QUALITY, COURSE OF DEALING, TRADE
USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS.
102
Limitation of Liability
IN NO EVENT SHALL AVER BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT LIMITED
TO, LOSS OF PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS INTERRUPTION,
OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN
CONNECTION WITH THIS LIMITED WARRANTY, OR THE USE OR PERFORMANCE OF ANY
PRODUCT, WHETHER BASED ON CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR ANY
OTHER LEGAL THEORY, EVEN IF AVER HAS ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. AVER’S TOTAL, AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE,
REGARDLESS OF FORM OF ACTION, SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY
YOU TO AVER FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED.
Governing Law and Your Rights
This warranty gives you specific legal rights; you may also have other rights granted under state law.
These rights vary from state to state.
Federal Communications Commission Statement
(Class A)
NOTE- This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by tuning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
For warranty period, please refer to the warranty card.
Class A ITE
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE
limits. Such equipment should not be restricted in its sale but the following warning shall be included
in the instructions for use:
Warning - This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
103
CE Class A (EMC)
This product is herewith confirmed to comply with the requirements set out in the Council
Directives on the Approximation of the laws of the Member States relating to Electromagnetic
Compatibility Directive 2004/108/EC.
Warning - This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures to correct this
interference.
Copyright
© 2016 by AVer Information Inc. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by
any means without the written permission of AVer INFORMATION Inc.
The mark of Crossed-out wheeled bin indicates that this product must not be disposed of with your
other household waste. Instead, you need to dispose of the waste equipment by handing it over to
a designated collection point for the recycling of waste electrical and electronic equipment. For
more information about where to drop off your waste equipment for recycling, please contact your
household waste disposal service or the shop where you purchased the product.
Trademarks
AVer is registered trademarks of AVer Information Inc. Other trademarks used herein for description
purpose only belong to each of their companies.
Disclaimer
No warranty or representation, either expressed or implied, is made with respect to the contents of
this documentation, its quality, performance, merchantability, or fitness for a particular purpose.
Information presented in this documentation has been carefully checked for reliability; however, no
responsibility is assumed for inaccuracies. The information contained in this documentation is subject
to change without notice. In no event will AVer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use this product or documentation, even if
advised of the possibility of such damages.
AVer Information Inc.
Website: http://www.aver.com