Table of Contents
- AVerVision M70HD
- Table of Contents
- Package Contents
- Optional Accessories
- Get Familiar with the AVerVision M70HD
- Making the Connections
- Set the TV-RGB Switch Setting
- Connect to a Monitor or LCD/DLP Projector
- Connect to a Monitor or LCD/DLP Projector with HDMI Output interface
- Connect to a Computer with HDMI Input interface
- Connect to a TV
- Connecting the Power
- Connect to a Computer
- Connect to a Computer via USB
- Connect an External Microphone
- Connect an Amplified Speaker
- Connect to a Microscope
- Setting Up AVerVision M70HD
- OSD MENU
- Transfer Captured Images/Videos to a computer
- Technical Specifications
- RS-232 Diagram Connection
- RS-232 Cable Specifications
- RS-232 Transmission Specifications
- Troubleshooting
- Limited Warranty
- Limitations of Warranty
- Disclaimer of Warranty
- Limitation of Liability
- Governing Law and Your Rights
AVer M70-HD User Manual
Displayed below is the user manual for M70-HD by AVer which is a product in the Document Cameras category. This manual has pages.
Related Manuals
AVerVision M70HD
User Manual
Federal Communications Commission Statement (Class A)
NOTE- This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by tuning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation betw een the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.
Class A ITE:
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class
B ITE limits. Such equipment should not be restricted in its sale but the following warning shall
be included in the instructions for use:
Warning - This is a class A product. In a domestic environment this product may cause radio
interference in w hich case the user may be required to take adequate measures.
COPYRIGHT
© 2015 AVer Information Inc. All rights reserved.
All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form
or by any means without the prior w ritten permission of AVer Information Inc. is prohibited. All
information or specifications are subject to change without prior notice.
TRADEMARKS
“AVer” is a trademark ow ned by AVer Information Inc. Other trademarks used herein for
description purpose only belong to each of their companies.
NOTICE
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. THE
INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY.
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT
MODIFICATION.
THE MARK OF CROSSED-OUT WHEELED BIN INDICATES THAT THIS PRODUCT
MUST NOT BE DISPOSED OF WITH YOUR OTHER HOUSEHOLD WASTE.
INSTEAD, YOU NEED TO DISPOSE OF THE WASTE EQUIPMENT BY HANDING
IT OVER TO A DESIGNATED COLLECTION POINT FOR THE RECYCLING OF
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT. FOR MORE
INFORMATION ABOUT WHERE TO DROP OFF YOUR WASTE EQUIPMENT FOR
RECYCLING, PLEASE CONTACT YOUR HOUSEHOLD WASTE DISPOSAL
SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT.
Remote Control Battery Safety Information
- Store batteries in any cool & dry place.
- Do not dispose used batteries in domestic w aste. Dispose batteries at special
collection points or return to stores if applies.
- Remove the batteries if they are not in use for long period of time. Battery leakage
and corrosion can damage the remote control, dispose batteries safely.
- Do not mix and use old and new batteries.
- Do not mix and use different types of batteries: alkaline, standar d (carbon-zinc) or
rechargeable (nickel-cadmium).
- Do not dispose batteries in a fire.
- Do not attempt to short circuit the battery terminals.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種
情況下，使用者會被要求採取某些適當的對策。
T
Ta
ab
bl
le
e
o
of
f
C
Co
on
nt
te
en
nt
ts
s
T
Ta
ab
bl
le
e
o
of
f
C
Co
on
nt
te
en
nt
ts
s .....................................................................................1
Package Contents .........................................................................................1
Optional Accessories ....................................................................................1
Get Familiar with the AVerVision M70HD.......................................................2
Right Panel.............................................................................................................................. 2
Rear Panel .............................................................................................................................. 3
Left Panel ................................................................................................................................ 3
Control Panel .......................................................................................................................... 4
Remote Control ...................................................................................................................... 5
Making the Connections ...............................................................................8
Set the TV-RGB Switch Setting ........................................................................................... 8
Connect to a Monitor or LCD/DLP Projector ..................................................................... 8
Connect to a Monitor or LCD/DLP Projector with HDMI Output interface .................... 9
Connect to a Computer with HDMI Input interface ........................................................... 9
Connect to a TV ...................................................................................................................10
Connecting the Power .........................................................................................................10
Connect to a Computer ....................................................................................................... 11
Connect to a Computer via USB ....................................................................................... 11
Connect an External Microphone ......................................................................................12
Connect an Amplified Speaker...........................................................................................12
Connect to a Microscope ....................................................................................................13
Setting Up AVerVision M70HD ..................................................................... 14
Camera Head .......................................................................................................................14
Mechanical Arm ....................................................................................................................15
Infrared Sensor.....................................................................................................................15
Mounting the M70HD on a Flat Surface ...........................................................................16
Anti-glare Sheet....................................................................................................................16
External Memory Storage ...................................................................................................17
I
In
ns
se
er
rt
t
a
an
n
S
SD
D
C
Ca
ar
rd
d..............................................................................................................17
I
In
ns
se
er
rt
t
a
a
U
US
SB
B
F
Fl
la
as
sh
h
D
Dr
ri
iv
ve
e..................................................................................................17
OSD MENU .................................................................................................. 18
Navigate the Menu and Submenu.....................................................................................19
Image .....................................................................................................................................19
Brightness...........................................................................................................................19
Contrast...............................................................................................................................19
Mode....................................................................................................................................20
Effect....................................................................................................................................20
Mirror ...................................................................................................................................20
Advanced ............................................................................................................................20
Auto Image .........................................................................................................................21
Exposure.............................................................................................................................21
White Balance ....................................................................................................................21
Focus...................................................................................................................................21
Presentation ..........................................................................................................................22
Spotlight ..............................................................................................................................22
Visor.....................................................................................................................................22
PIP .......................................................................................................................................23
Split Screen ........................................................................................................................23
Timer....................................................................................................................................24
Saturation ...........................................................................................................................24
Setting ....................................................................................................................................24
Capture ...............................................................................................................................24
Resolution...........................................................................................................................24
Quality .................................................................................................................................25
Type .....................................................................................................................................25
Interval.................................................................................................................................25
Recording ...........................................................................................................................25
Storage ................................................................................................................................25
Format .................................................................................................................................26
USB to PC ..........................................................................................................................26
Flicker ..................................................................................................................................26
System ...................................................................................................................................27
Language ............................................................................................................................27
Output Display ...................................................................................................................27
Backup ................................................................................................................................27
Save Setting .......................................................................................................................27
Recall Setting .....................................................................................................................27
Information..........................................................................................................................28
Default .................................................................................................................................28
Playback ................................................................................................................................28
Slide Show..........................................................................................................................28
Interval.................................................................................................................................28
Slide Show Effect ..............................................................................................................29
Current Storage .................................................................................................................29
Delete All.............................................................................................................................29
Annotation .............................................................................................................................29
Connecting a USB mouse................................................................................................30
Using the Annotation Control Panel ...............................................................................30
Transfer Captured Images/Videos to a computer ............................................... 31
Technical Specifications ............................................................................. 32
Image...................................................................................................................................32
Optics ..................................................................................................................................32
Power ..................................................................................................................................32
Lighting................................................................................................................................32
Input/Output........................................................................................................................32
Dimension...........................................................................................................................33
External Storage ................................................................................................................33
RS-232 Diagram Connection ....................................................................... 33
RS-232 Cable Specifications ....................................................................... 33
RS-232 Transmission Specifications........................................................... 34
RS-232 Communication Format ........................................................................................34
RS-232 Send Command Table ..........................................................................................34
RS-232 Get Command Table .............................................................................................39
Troubleshooting .......................................................................................... 40
Limited Warranty ......................................................................................... 42
Limitations of Warranty ............................................................................... 42
Disclaimer of Warranty................................................................................ 42
Limitation of Liability .................................................................................. 43
Governing Law and Your Rights.................................................................. 43
1
P
Pa
ac
ck
ka
ag
ge
e
C
Co
on
nt
te
en
nt
ts
s
Make sure the following items are included in the package.
AVerVision M70HD
RS-232/CVBS Cable
USB Cable
Power Adapter (12V, 2A)
* The pow er adapter will vary
depending on the standard
power outlet of the country
where it is sold.
RGB Cable
Remote Control
(batteries included)
Software & Manual CD
O
Op
pt
ti
io
on
na
al
l
A
Ac
cc
ce
es
ss
so
or
ri
ie
es
s
Microscope Adapter
(28mm & 34mm Rubber Coupler are included)
Light Box
Anti-glare Sheet
Carrying Bag
2
G
Ge
et
t
F
Fa
am
mi
il
li
ia
ar
r
w
wi
it
th
h
t
th
he
e
A
AV
Ve
er
rV
Vi
is
si
io
on
n
M
M7
70
0H
HD
D
(8)
(5)
(7)
(6)
(1)
(2)
(3)
(4)(9)
(fig. 1.1)
Name
Function
(1) Camera head
Contain the camera sensor.
(2) Camera lens
Focus the image in the camera.
(3) Control panel
Easy access to various functions.
(4) Built-in MIC
Record audio when recording video clip. The recorded sound will be
in monophonic.
(5) Arm
Extendable for view ing coverage.
(6) Left panel
Connections for LCD monitor using HDMI cable, microphone,
speaker, computer, SD card, and TV-RGB display output sw itch.
(7) IR sensor
Receive remote control commands.
(8) Rear panel
Connections for power, computer for RGB input display and LCD
monitor using RGB cable.
(9) Right panel
On/off switch for USB flash drive port and pow er button.
Right Panel
(3)
(2)
(1)
(fig. 1.2)
Name
Function
(1) USB PC - USB Flash
Drive sw itch
Switch to right (►) for audio video recording directly to a
USB flash drive and left (◄) w hen connecting AVerVision
M70HD to a computer using a USB cable.
(2) USB Thumb Drive port
Insert a USB flash drive for audio video recording storage.
(3) Power button
Turn the unit on/standby mode.
3
Rear Panel
(4)
(1)
(2)(3)
(fig. 1.3)
Name
Function
(1) Antitheft Slot
Attach a Kensington compatible security lock or antitheft
device.
(2) DC12V port
Connect the pow er adapter into this port.
(3) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUT port only. Connect this port to the
RGB/VGA output port of a computer.
(4) RGB OUTPUT port
Connect the AVerVision M70HD to any display device w ith
RGB cable
Left Panel
(1) (8)
(6)
(7)
(5)
(4)
(3)
(2)
(fig. 1.4)
Name
Function
(1) Mini USB port
Connect to a USB port of a computer with a USB cable and use
AVerVision M70HD as a USB Camera or transfer the captured
images/videos either from the memory source to computer.
(2) HDMI IN
Connect an external HDMI source as an input via this port
(3) HDMI OUTPUT
Output the video signal from the main system on an LCD monitor
with HDMI interface using HDMI cable.
(4) MIC port
Connect a 3.5mm plug microphone. The built-in mic will be
disabled when an external MIC is connected to this port.
(5) Speaker port
Connect to an amplified speaker.
(6) RS-232/CVBS port
Connect the RS-232/CVBS cable into this port. The RCA jack
outputs the video signal from the camera to a TV or video
equipment. The RS-232 jack is used to connect to computer serial
port or to any control panel or for centralized control if desire.
(7) TV-RGB switch
TV switch to output display video from RS232/CVBS (via RCA
connection), and RGB to RGB and HDMI OUTPUT ports.
(8) SD card slot
Insert the SD card with the label facing up.
4
Control Panel
(7)
(8)
(10)
(11)
(12)
(1)
(2)
(3)
(4)
(6)
(9)
(5)
(13)
(fig. 1.5)
Name
Function
(1) MENU
Open and exit the OSD menu.
(2) RECORDING
Start/Stop audio & video recording. Audio and video recording can be
saved on a SD card or an USB Flash drive only. See HHUExternal
Memory StorageUHH.
(3) CAP/DEL
- Capture picture in Camera mode. In continuous capture mode,
press this button again to stop.
- Delete the selected picture/video in Playback mode.
(4) PLAYBACK
View & playback captured still images and audio video files.
(5) FREEZE / STOP
- Pause or resume image display in Camera mode.
- Stop audio & video playback in Playback mode.
(6) Built-in MIC
Record audio automatically when recording video clip.
(7) CAMERA / PC
Switch between Camera and Computer.
(8) ▲,▼,◄, & ►
- Pan and zoom-in image (above digital zoom level) in both live and
playback mode.
- Select options in OSD menu.
- Use ▲&▼ to increase and decrease the video playback volume.
- Use ◄&► to play the video backw ard and forward.
- Move the Spotlight frame and Visor screen cover.
(9) ZOOM IN
Increase the image magnification in camera and picture playback
mode.
(10) ZOOM OUT
Decrease the image magnification in camera and picture playback
mode.
(11) ENTER
- Make a selection in Playback mode and OSD menu.
- Start/Pause video playback.
(12) AUTO FOCUS
Adjust the focus automatically.
(13) LAMP
Turn the overhead light on/off.
5
Remote Control
The remote control requires two (2) “AAA” size batteries (supplied), make sure batteries
are installed properly before use. You can access all the features of AVerVision M70HD
with the remote.
Name
Function
(18)
(14)
(11)
(7)
(8)
(5)
(2)
(1)
(22)
(13)
(4)
(3)
(15)
(12)
(17)
(23)
(20)
(19)
(9)
(6)(16)
(10) (21)
(fig. 1.6)
(1) POWER
Turn the unit on/standby.
(2) CAMERA
Camera mode displays the video signal
from the built-in camera.
(3) RECORD
Start/Stop audio & video recording. Video
recording can only be saved either in a
SD memory card or a USB flash drive.
(4) CAPTURE
Capture still image in Camera mode. In
continuous capture mode, press this
button again to stop.
(5) VISOR
Call the Visor submenu. Visor covers part
of the presentation screen and allow
presenter to reveal the material as desire.
In the Visor submenu, the follow ing
options are available.
ON/OFF – select to run/cancel the Visor.
Press to move to the next selection.
Shade – set the opacity level of the
covered area. The shaded area will
completely turns black when it is set to
level 100. Press to move to the
next selection.
OK – press for the setting to take
effect. If you select ON, upper part of the
presentation screen is slightly exposed.
Use the ▲,▼,◄, & ► buttons to reveal
more of the covered area; and OFF will
close the submenu.
To turn off Visor, press again.
(6) ROTATE
Rotate the image by 90° in Camera
mode and Playback mode.
(7) MENU
Open and exit the OSD menu.
6
Name
Function
(18)
(14)
(11)
(7)
(8)
(5)
(2)
(1)
(22)
(13)
(4)
(3)
(15)
(12)
(17)
(23)
(20)
(19)
(9)
(6)(16)
(10) (21)
(fig. 1.6)
(8) ▲,▼,◄, & ►
- Pan and zoom-in image (above digital
zoom level) in both live and playback
mode.
- Select options in OSD menu.
- Use ▲&▼ to increase and decrease
the video playback volume.
- Use ◄&► to play the video backw ard
and forward.
- Move the Spotlight frame and Visor
screen cover.
(9) AUTO
FOCUS
Adjust the focus automatically.
(10) ZOOM +/-
- Increase/decrease the image
magnification in camera and picture
playback mode.
- Use to easily page up and page down
16-thumbnail picture preview.
(11) ZOOM
RESET
Reset zoom level to 100%.
(12) PLAYBACK
View the captured picture/video from the
memory in 16-thumbnail images.
(13) PC 1/2
PC mode displays the video signal from
the RGB INPUT port of M70HD.
(14) FREEZE /
STOP
- Freeze live images.
- Stop video playback.
(15) SPOTLIGHT
Call the Spotlight submenu. Spotlight
overlays a box frame on the presentation
screen. You can adjust the box size and
move it around.
In the Spotlight submenu, the follow ing
options are available.
ON/OFF – select to run/cancel the
Spotlight. Press to move to the next
selection.
Shade – set the opacity level of the area
outside the box. The shaded area will
completely turns black when it is set to
level 100. Press to move to the next
selection.
7
Name
Function
(18)
(14)
(11)
(7)
(8)
(5)
(2)
(1)
(22)
(13)
(4)
(3)
(15)
(12)
(17)
(23)
(20)
(19)
(9)
(6)(16)
(10) (21)
(fig. 1.6)
(15) SPOTLIGHT
Color – select the Spotlight frame color.
Press to move to the next selection.
OK – press for the setting to take
effect. If you select ON, the frame w ill
appear and blink, use the ▲,▼,◄, & ►
buttons to adjust the frame size and
press to set the desired size; and
OFF w ill close the submenu.
To turn off Spotlight, press again.
(16) SPLIT
SCREEN
Divide the screen into two. One side
displays the live image from the built-in
camera and the other side displays 8-
thumbnail size picture/video from the
memory.
(17) MODE
Select from 6 type of modes:
Sharp - adjust the contrast along the
edges making text appear more visible.
Graphics - adjust the gradient of image.
Motion - increase frame rate. Sufficient
lighting is required when using this
mode.
Microscope - automatically adjust
optical zoom for microscopic viewing.
Macro - set to view when object is only
5 –10cm away from the camera.
Infinite - set to view when subject is at
least 80cm away from the camera.
(18) TIMER
Call the Timer submenu. Select to
Start/Pause/Stop the timer countdown
and set the timer duration.
(19)
- Make a selection in Playback mode
and OSD menu.
- Play/Pause video playback.
(20) LAMP
Turn the overhead light on/off.
(21) BRIGHTNES
S +/-
Adjust the brightness.
(22) DEFAULT
Reset to factory default setting.
(23) DEL
Delete the selected picture/video in
Playback mode.
8
M
Ma
ak
ki
in
ng
g
t
th
he
e
C
Co
on
nn
ne
ec
ct
ti
io
on
ns
s
Before making the connection, make sure the power of all devices are turned off. If you
are not sure on where to connect, simply follow the illustrated connections below and also
refer to the user manual of the device you are connecting the AVerVision M70HD with.
S
Se
et
t
t
th
he
e
T
TV
V-
-R
RG
GB
B
S
Sw
wi
it
tc
ch
h
S
Se
et
tt
ti
in
ng
g
The TV-RGB switch determines the display output selection. Switch it to RGB (right) to
output signal using RGB/HDMI connection and TV (left) to output signal using RCA
connection. (see fig. 1.4 # 6)
Switch
AVerVision Port
Display Device Port
RGB
RGB OUTPUT
To
RGB INPUT
HDMI OUTPUT
HDMI INPUT
TV
RS232/CVBS
(use RS-232/CVBS cable)
VIDEO IN
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
M
Mo
on
ni
it
to
or
r
o
or
r
L
LC
CD
D/
/D
DL
LP
P
P
Pr
ro
oj
je
ec
ct
to
or
r
Locate the RGB (VGA) input port of the graphics display device and connect it to RGB
OUTPUT port of AVerVision M70HD.
Make sure the TV/RGB switch is set to RGB.
9
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
M
Mo
on
ni
it
to
or
r
o
or
r
L
LC
CD
D/
/D
DL
LP
P
P
Pr
ro
oj
je
ec
ct
to
or
r
w
wi
it
th
h
H
HD
DM
MI
I
O
Ou
ut
tp
pu
ut
t
i
in
nt
te
er
rf
fa
ac
ce
e
Locate the HDMI input port of the display device and connect it to HDMI OUTPUT port of
AVerVision M70HD.
Make sure the TV/RGB switch is set to RGB.
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
C
Co
om
mp
pu
ut
te
er
r
w
wi
it
th
h
H
HD
DM
MI
I
I
In
np
pu
ut
t
i
in
nt
te
er
rf
fa
ac
ce
e
Locate the HDMI output port of the computer of laptop and connect it to HDMI in port of
AVerVision M70HD.
- Make sure the TV/RGB switch is set to RGB.
- To display computer image, press Camera/PC button on the control panel or
remote control to switch AVerVision M70HD to computer mode.
- For laptop to output display image, use the keyboard command (FN+F5) to
switch between the display modes. For different command, please refer to
your laptop manual.
10
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
T
TV
V
Locate the VIDEO or SCART RGB (if applicable) input port of the TV or Video equipment
(i.e., VCR) to record your presentation and connect it to RCA jack of RS-232/CVBS cable
(optional).
C
Co
on
nn
ne
ec
ct
ti
in
ng
g
t
th
he
e
P
Po
ow
we
er
r
Connect the power adapter to a standard 100V~240V AC power outlet. The unit
automatically in standby mode once the power is connected. Press to turn on.
Power adapter Wall outlet
11
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
C
Co
om
mp
pu
ut
te
er
r
Locate the RGB (VGA) output port of the computer or laptop and connect it to RGB INPUT
port of AVerVision M70HD. The video signal from the RGB INPUT port is streamed to RGB
OUTPUT port.
- To display computer image, press Camera/PC button on the control panel
or remote control to switch AVerVision M70HD to computer mode.
- For laptop to output display image, use the keyboard command (FN+F5)
to switch between the display modes. For different command, please refer
to your laptop manual.
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
C
Co
om
mp
pu
ut
te
er
r
v
vi
ia
a
U
US
SB
B
Locate the USB port of the computer or laptop and connect it to USB port of AVerVision
M70HD. This enables you to use AVerVision M70HD as a USB Camera or to transfer the
captured pictures/videos from the memory and to computer. Also see “Transfer File from
AVerVision M70HD to PC”.
Make sure the USB Flash Drive switch (see fig. 1.2 #1) is set to the left.
12
C
Co
on
nn
ne
ec
ct
t
a
an
n
E
Ex
xt
te
er
rn
na
al
l
M
Mi
ic
cr
ro
op
ph
ho
on
ne
e
Plug a 3.5mm mono microphone to port. The built-in microphone on the control panel
will be disabled when an external microphone is connected. The recorded audio will be in
monophonic sound.
C
Co
on
nn
ne
ec
ct
t
a
an
n
A
Am
mp
pl
li
if
fi
ie
ed
d
S
Sp
pe
ea
ak
ke
er
r
Plug a 3.5mm plug amplified speaker to port. Only the audio from the video playback is
supported.
We recommend connecting an amplified speaker to the Audio output port.
Take caution when using earphones. Adjust the volume down on the
remote to prevent hearing damage due to loudness.
13
C
Co
on
nn
ne
ec
ct
t
t
to
o
a
a
M
Mi
ic
cr
ro
os
sc
co
op
pe
e
Connect the AVerVision M70HD to a microscope enables you to examine microscopic
objects on a big screen.
1. Change the image display mode to
Microscope. Press MENU > select
IMAGE tab > select MODE > select
(microscope) and press .
2. Aim the camera head at the farthest
point and press AUTO FOCUS.
3. Adjust the focus of the microscope.
4. Select the appropriate rubber coupler
size for the microscope eyepiece and
insert it in the microscope adapter.
5. Remove the microscope eyepiece
from the microscope and connect it to
the microscope adapter with the
rubber coupler inserted. Fasten the 3
bolts until the adapter secures the
eyepiece.
Microscope
eyepiece
Microscope
adapter
Microscope
For the eyepiece, we suggest
using 15.5mm eye relief or higher.
6. Attach the microscope adapter to the
AVerVision camera head. Then
connect it to the AVerVision and
microscope.
14
S
Se
et
tt
ti
in
ng
g
U
Up
p
A
AV
Ve
er
rV
Vi
is
si
io
on
n
M
M7
70
0H
HD
D
This section provides useful tips on how to adjust the AVerVision M70HD to meet your
needs.
C
Ca
am
me
er
ra
a
H
He
ea
ad
d
The camera head can turn freely at 90° to the left and right and up and down.
90°
90°
90°
90°
If the camera head is in upright position, you can also press ROTATE on the remote
control twice to rotate the image in 180°.
15
M
Me
ec
ch
ha
an
ni
ic
ca
al
l
A
Ar
rm
m
The mechanical arm design can extend for a full A4 paper viewing.
I
In
nf
fr
ra
ar
re
ed
d
S
Se
en
ns
so
or
r
Aim the remote control at the infrared sensor to operate the unit.
16
M
Mo
ou
un
nt
ti
in
ng
g
t
th
he
e
M
M7
70
0H
HD
D
o
on
n
a
a
F
Fl
la
at
t
S
Su
ur
rf
fa
ac
ce
e
Measure and mark the horizontal of 75 mm and vertical of 70 mm from the center line
distance between the holes on the flat surface as describe in the illustration below. Use 4
pieces of M4.0 screws for 6 mm holes and secure the M70HD on the flat surface.
A
An
nt
ti
i-
-g
gl
la
ar
re
e
S
Sh
he
ee
et
t
The anti-glare sheet is a special coated film that helps eliminate any
glare that maybe encountered while displaying very shiny objects or
glossy surfaces such as magazines and pictures. To use, simply
place the anti-glare sheet on top of the shiny document to reduce
reflected light.
17
E
Ex
xt
te
er
rn
na
al
l
M
Me
em
mo
or
ry
y
S
St
to
or
ra
ag
ge
e
AVerVision M70HD supports both SD memory card and USB flash drive for more image
capture and audio & video recordings. AVerVision M70HD can detect when there is an
external storage media and automatically switch to the last detected storage. If no
external storage is connected, all captured still images will be saved in the built-in memory.
I
In
ns
se
er
rt
t
a
an
n
S
SD
D
C
Ca
ar
rd
d
Insert the card with the contact facing down until it reaches the end. To remove the card,
push to eject and pull the card out. The supported SD card capacity is from 1GB to 32GB
(FAT).
I
In
ns
se
er
rt
t
a
a
U
US
SB
B
F
Fl
la
as
sh
h
D
Dr
ri
iv
ve
e
Make sure to set the USB Flash Drive switch (see fig. 1.2 #1) to the right before inserting
a USB flash drive. AVerVision M70HD can support USB flash drive from 2GB to 32GB
(FAT).
18
O
OS
SD
D
M
ME
EN
NU
U
There are 4 tabs on the OSD menu: IMAGE, PRESENTATION, SETTING and SYSTEM.
In Playback mode, you can access PLAYBACK OSD menu to enable the Slide Show
feature and modify Slide Show interval and transition setting if desire.
For TV output, the RESOLUTION will be disabled in SETTING menu list.
IMAGE
PRESENTATION
SETTING
SYSTEM
PLAYBACK
ANNOTATION
19
N
Na
av
vi
ig
ga
at
te
e
t
th
he
e
M
Me
en
nu
u
a
an
nd
d
S
Su
ub
bm
me
en
nu
u
1. Press MENU button on the remote or control
panel.
2. Press ► and ◄ to toggle between tabs
3. Press ▼ and ▲ to choose a selection in the
menu list.
4. Press to make a selection.
5. Use ► and ◄ to adjust the setting or make a
selection.
6. Press to enter submenu.
7. Press MENU to close the OSD menu.
I
Im
ma
ag
ge
e
Menu Screen
Function
Brightness
Adjust brightness level manually between 0 and 63.
Contrast
Adjust the contrast level manually between 0 and 255
under bright and dark environments.
20
Menu Screen
Function
Mode
Select from the various image display settings.
Sharp - adjust the contrast along the edges making
text appear more visible.
Graphics - adjust the gradient of image.
Motion - increase frame rate. Sufficient lighting is
required when using this mode.
Microscope - automatically adjust optical zoom for
microscopic viewing.
Macro - set to view when object is only 5 – 10 cm
away from the camera.
Infinite - set to view when subject is at least 80cm
away from the camera.
Effect
Convert the image into positive (true color), monochrome
(black and white) or negative.
Mirror
Select to flip the image in Camera mode.
Advanced
Select to set the Auto Image, Exposure, and White
Balance settings.
21
Menu Screen
Function
Auto Image
Select ON or OFF to automatically adjust the white
balance and exposure setting, and correct the color and
exposure compensation.
Exposure
Select the exposure setting.
AUTO - automatically adjust the camera exposure and
the amount of light required.
MANUAL - manually adjust the exposure level. The
expos ure can be adjusted up to 100.
White Balance
Select the White Balance setting for various light
conditions or color temperature.
AUTO - automatically adjust the white balance.
MANUAL - manually adjust the red and blue color level.
The color level can be adjusted up to 255.
Focus
Manually adjust the focus.
22
P
Pr
re
es
se
en
nt
ta
at
ti
io
on
n
Menu Screen
Function
Spotlight
Spotlight overlays a frame on
the presentation screen. You
can move the Spotlight around
the presentation screen using
the ▲, ▼, ◄, & ► buttons.
Select Execute to call the
Spotlight submenu.
In the Spotlight submenu, the
following options are available.
ON/OFF – select to run/cancel
the Spotlight. Press to
move to the next selection.
Shade – set the opacity level of the area outside the box.
The shaded area will completely turns black when it is set
to level 100. Press to move to the next selection.
Color – select the Spotlight frame color. Press to
move to the next selection.
OK – press for the setting to take effect. If you
select ON, the frame will appear and blink, use the ▲, ▼,
◄, & ► buttons to adjust the frame size and press
to set the desired size; and OFF will close the submenu.
Visor
Visor covers the presentation
screen. The upper part of the
presentation screen is slightly
exposed. Use the ▲, ▼, ◄, & ►
buttons to reveal more of the
covered area. Select Execute to call
the Visor submenu.
23
Menu Screen
Function
In the Visor submenu, the following options are available.
ON/OFF – select to run/cancel the Visor. Press to
move to the next selection.
Shade – set the opacity level of the covered area. The
shaded area will completely turns black when it is set to
level 100. Press to move to the next selection.
OK – press for the setting to take effect. If you
select ON, upper part of the presentation screen is slightly
exposed. Use the ▲, ▼, ◄, & ► buttons to reveal more
of the covered area; and OFF will close the submenu.
PIP
Select the thumbnail playback screen location and show
the thumbnail playback screen at the corner of the
screen to recall the captured image from the memory in
Camera mode. Select OFF to cancel PIP.
Lower Left
Upper Left
Upper Right
Lower Right
Split Screen
Divide the screen into two parts. Half of the screen
displays the 8-thumbnail images and the other half
display the image from the AVerVision M70HD camera.
Select the display location of the 8- thumbnail playback
images. Select OFF to cancel Split Screen.
Left
Right
Top
Below
24
Menu Screen
Function
Timer
Start/Pause/Stop the timer and set the timer duration.
The timer automatically counts up after the count down
reaches zero to show the elapsed time. Even when you
switch between Playback, PC or Camera modes, the
timer will continue.
Saturation
Adjust value of saturation.
S
Se
et
tt
ti
in
ng
g
Menu Screen
Function
Capture
Select to set the capture resolution, quality, type and
interval settings.
Resolution
Select the capture size. In 5M setting, the capture
resolution size is 2560 X 1920.
25
Menu Screen
Function
Quality
Select the capture compression setting.
Type
Select the capture type.
Single - capture one picture only.
Continuous - capture successive pictures.
Interval
Set the time interval for continuous capture. The length
can be set up to 600 sec (10 min).
Recording
Select the video recording compression setting.
Storage
Change the storage location. Audio & video recording
can only be saved in SD memory card or USB flash
drive.
26
Menu Screen
Function
Format
Format to delete all the data in the selected memory.
USB to PC
Select the status of the AVerVision M70HD when it is
connected to the computer via USB. Make sure the USB
switch on the left panel is set to .
Camera - can be used as a computer webcam or with
our bundled software to record video and capture still
image.
Storage - transfer the captured pictures/videos from the
memory to computer hard disk.
Flicker
Select between 50Hz or 60Hz. Some display devices
cannot handle high refresh rates. The image will flicker a
couple of times as the output is switched to another
refresh rate.
27
S
Sy
ys
st
te
em
m
Menu Screen
Function
Language
Change and select different language.
Output Display
Set the resolution to display the image on screen. This
selection will be disabled in TV output mode.
Backup
Copy the image from the built-in memory to SD card or
USB flash drive.
Save Setting
Save current setting in the selected profile number. Only
effect, mode, brightness and contrast settings can be
saved.
Recall Setting
Restore the setting back to the selected profile number.
28
Menu Screen
Function
Information
Display the product information.
Default
Restore all the settings into original factory default
setting.
P
Pl
la
ay
yb
ba
ac
ck
k
Menu Screen
Function
Slide Show
Display all captured still pictures in an automated slide
show. The video file will be skipped.
Interval
Set the interval before displaying the next picture. The
length can be set up to 100 sec.
29
Menu Screen
Function
Slide Show Effect
Select the slide show transition effect.
Slide image
Wipe right
Checker down
Split Vertical Out
Wipe down
Split Horizontal Out
Current Storage
Select the source of the images.
Delete All
Permanently delete all the data in selected memory
source. A Warning Message will appear. Select YES to
continue and NO to stop formatting the storage.
A
An
nn
no
ot
ta
at
ti
io
on
n
In single image playback mode or when the screen is frozen in camera mode, you can use
the annotation feature to overlay straight line or freeform line on the captured image or still
camera screen with the USB mouse connected to the USB port of AVerVision M70HD. It
comes with the following selections: Color Palette, Line Thickness, Line, Freehand,
Capture, Eraser, and Hide/Show icons.
Annotation can only be supported in the
following resolution setting :
- 1024 x 768
- 1280 x 720
- 1280 x 1024
30
Connecting a USB mouse
1. Set the USB switch on the left panel to
. AVerVision M70HD will then detect
the USB mouse and the LED on
the control panel will light up.
2. Connect the USB mouse cable to the USB slot of AVerVision M70HD.
Using the Annotation Control Panel
The annotation control panel appears on the upper left corner of the screen. A cursor will
appear on the screen. Move the cursor on the Annotation control panel selections and left-
click to select the features you want to use.
Name
Function
Color Palette
Select the line color.
Line Thickness
Select the thickness of the line.
Line
Select to draw a straight line.
Freehand
Select to draw freeform line.
Capture
Capture the image with the annotation and save it as a new
file.
Eraser
Select to erase any part of the annotation that it comes in
contact with or delete all annotation.
Hide/Show
Shrink or expand the annotation menu.
31
T
Tr
ra
an
ns
sf
fe
er
r
C
Ca
ap
pt
tu
ur
re
ed
d
I
Im
ma
ag
ge
es
s/
/V
Vi
id
de
eo
os
s
t
to
o
a
a
c
co
om
mp
pu
ut
te
er
r
This enables you to transfer the captured image from the built-in memory or SD to a
computer.
The instruction below MUST be read and followed BEFORE connecting
the USB cable.
1. Make sure to set the USB switch to for the computer to detect AVerVision M70HD.
2. MUST set the USB to PC as STORAGE before connecting the USB cable.
3. When “Mass Storage Start…” appears at the lower right corner of the presentation
screen, you may now connect the USB cable.
4. Upon connecting the USB cable, the system automatically detects the new removable
disk. You can now transfer the captured image(s) from the UUM70HD built-in
memoryUU to the computer hard disk.
32
T
Te
ec
ch
hn
ni
ic
ca
al
l
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
ns
s
Image
Sensor
1/3.2” CMOS
Pixel Count
5M
Frame Rate
30 fps (max.)
White Balance
Auto / Manual
Exposure
Auto / Manual
Image mode
Sharp / Graphics / Motion / Microscope / Macro / Infinite
Effect
Color / B/W / Negative / Mirror / Rotate / Freeze
RGB output
1920x1080, 1600x1200, 1280x1024, 1280x800, 1280x720,
1024x768
HDMI output
HD 1080p; HD 720p
Image Capture
240 Frames(XGA) ; 80 Frames(5M)
Optics
Focusing
Auto / Manual
Shooting Area
420mm x 315mm
Zooming
Total zoom 192X ( 12X Optical + 2X AVERZOOM™ +8X
Digital Zoom)
Power
Power Source
DC 12V, 100-240V, 50-60Hz
Consumption
16.8 Watts (lamp off); 18 Watts (lamp on)
Lighting
Lamp Type
LED light
Input/Output
RGB Input
15-Pins D-sub (VGA)
RGB Output
15-Pins D-sub (VGA)
HDMI Input
HDMI
HDMI Output
HDMI
CVBS/RS-232
Mini-DIN Jack (use CVBS/RS-232 Adapter cable)
Composite Video
RCA Jack
USB
USB2.0
DC 12V Input
Power Jack
MIC
Phone Jack
Speaker
Phone Jack
33
Dimension
Operating
452mm x 182mm x 504mm (+/-2mm include rubber foot)
Folded
367mm x 182mm x 63mm (+/-2mm include rubber foot)
Weight
2.1 kg (about 4.629 lbs)
External Storage
Secure Digital (SD)
Max 32GB (FAT)
USB Flash Drive
Max 32GB (FAT)
R
RS
S-
-2
23
32
2
D
Di
ia
ag
gr
ra
am
m
C
Co
on
nn
ne
ec
ct
ti
io
on
n
AVerVision M70HD can be controlled using a computer or any centralized control panel
through RS-232 connection.
R
RS
S-
-2
23
32
2
C
Ca
ab
bl
le
e
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
ns
s
Make sure the RS-232 cable matches the cable specification design.
34
R
RS
S-
-2
23
32
2
T
Tr
ra
an
ns
sm
mi
is
ss
si
io
on
n
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
ns
s
Start bit
：1 bit
Data bit
：8 bit
Stop bit
：1 bit
Parity bit
：None
X parameter
：None
Baud rate (Communication speed)
：9600bps
R
RS
S-
-2
23
32
2
C
Co
om
mm
mu
un
ni
ic
ca
at
ti
io
on
n
F
Fo
or
rm
ma
at
t
Send Device Code(1 Byte) : 0x52
Type Code(1 Byte) : 0x0B
DataLength Code(1 Byte) : 0x03
Data Code(1 Byte) : See the Command Table for reference.
Data Code(2 Byte) : See the Command Table for reference.
Data Code(3 Byte) : See the Command Table for reference.
Receive Device Code(1 Byte) : 0x53
CheckSum Code(1 Byte) : See the Command Table for reference.
Format : Start + Type + DataLength + Data + CheckSum
Example : 0x52 + 0x0B + 0x03+ 0x01 + 0x00 + 0x00 + 0x53 + 0x5A (Command
Power Off)
R
RS
S-
-2
23
32
2
S
Se
en
nd
d
C
Co
om
mm
ma
an
nd
d
T
Ta
ab
bl
le
e
Send Format︰0x52 + 0x0B + 0x03 + Data[0] + Data[1] + Data[2] + 0x53 + CheckSum
Receive Format︰0x53 + 0x00 + 0x02+ *2 + *3 + 0x52 + CheckSum
*1 ：CheckSum = 0x0B xor 0x03 xor Data[0] xor Data[1] xor Data[2] xor 0x53
*2 ：Receive data ok : 0x0B, ID error: 0x01, CheckSum error: 0x02, Not Command : 0x03,
Function fail = 0x04
*3 ：Data[0], Return 0x00 if error
Function
Data[0]
Data[1]
Data[2]
CheckSum
POWER OFF
0x01
0x00
0x00
0x5A
POWER ON
0x01
0x01
0x00
0x5B
CAMERA MODE
0x02
0x00
0x00
0x59
PLAYBACK MODE
0x03
0x00
0x00
0x58
PC-1 PASS THROUGH
0x04
0x00
0x00
0x5F
IMAGE CAPTURE TYPE: SINGLE
0x05
0x00
0x00
0x5E
IMAGE CAPTURE TYPE: CONTINUOUS
0x05
0x01
0x00
0x5F
CONT. CAPTURE INTERVAL +
0x06
0x00
0x00
0x5D
35
Function
Data[0]
Data[1]
Data[2]
CheckSum
CONT. CAPTURE INTERVAL -
0x06
0x01
0x00
0x5C
NORMAL IMAGE CAPTURE
0x07
0x00
0x00
0x5C
3M/5M IMAGE CAPTURE
0x07
0x01
0x00
0x5D
TIMER START
0x08
0x00
0x00
0x53
TIMER PAUSE
0x08
0x01
0x00
0x52
TIMER STOP
0x08
0x02
0x00
0x51
TIMER SET TIME
0x08
0x03
VALUE[ 1 ~
120 ]
*1
PREVIEW MODE: SHARP
0x0A
0x00
0x00
0x51
PREVIEW MODE: GRAPHIC
0x0A
0x01
0x00
0x50
PREVIEW MODE: MOTION
0x0A
0x02
0x00
0x53
PREVIEW MODE: MICROSCOPE
0x0A
0x03
0x00
0x52
PREVIEW MODE: MACRO
0x0A
0x04
0x00
0x55
PREVIEW MODE: INFINITE
0x0A
0x05
0x00
0x54
PREVIEW MODE CAPTURE
0x0B
0x00
0x00
0x50
PLAYBACK DELETE
0x0C
0x00
0x00
0x57
PLAYBACK FULL SCREEN
0x0D
0x00
0x00
0x56
MIRROR OFF
0x0E
0x00
0x00
0x55
MIRROR ON
0x0E
0x01
0x00
0x54
ROTATE 0
0x0F
0x00
0x00
0x54
ROTATE 90
0x0F
0x01
0x00
0x55
ROTATE 180
0x0F
0x02
0x00
0x56
ROTATE 270
0x0F
0x03
0x00
0x57
EFFECT: COLOR
0x10
0x00
0x00
0x4B
EFFECT: B/W
0x10
0x01
0x00
0x4A
EFFECT: NEGATIVE
0x10
0x02
0x00
0x49
CONTRAST INCREASE
0x11
0x00
0x00
0x4A
CONTRAST DECREASE
0x11
0x01
0x00
0x4B
CONTRAST VALUE
0x11
0x02
VALUE[ 0 ~
255 ]
*1
BRIGHTNESS INCREASE
0x12
0x00
0x00
0x49
36
Function
Data[0]
Data[1]
Data[2]
CheckSum
BRIGHTNESS DECREASE
0x12
0x01
0x00
0x48
BRIGHTNESS VALUE
0x12
0x02
VALUE[ 0 ~
63 ]
*1
EXPOSURE: AUTO
0x13
0x00
0x00
0x48
EXPOSURE: MANUAL
0x13
0x01
0x00
0x49
EXPOSURE MANUAL INCREASE
0x14
0x00
0x00
0x4F
EXPOSURE MANUAL DECREASE
0x14
0x01
0x00
0x4E
WHITE BALANCE: AUTO
0x15
0x00
0x00
0x4E
WHITE BALANCE: MANUAL
0x15
0x01
0x00
0x4F
WHITE BALANCE BLUE INCREASE
0x16
0x00
0x00
0x4D
WHITE BALANCE BLUE DECREASE
0x16
0x01
0x00
0x4C
WHITE BALANCE RED INCREASE
0x17
0x00
0x00
0x4C
WHITE BALANCE RED DECREASE
0x17
0x01
0x00
0x4D
FLICKER: 50Hz
0x18
0x00
0x00
0x43
FLICKER: 60Hz
0x18
0x01
0x00
0x42
SPOTLIGHT: OFF
0x19
0x00
0x00
0x42
SPOTLIGHT: ON
0x19
0x01
0x00
0x43
SPOTLIGHT SHADE: 0% DARK
0x1A
0x00
0x00
0x41
SPOTLIGHT SHADE: 50% DARK
0x1A
0x01
0x00
0x40
SPOTLIGHT SHADE: 100% DARK
0x1A
0x02
0x00
0x43
SPOTLIGHT COLOR: RED
0x1B
0x00
0x00
0x40
SPOTLIGHT COLOR: GREEN
0x1B
0x01
0x00
0x41
SPOTLIGHT COLOR: BLUE
0x1B
0x02
0x00
0x42
SPOTLIGHT RESIZE
0x1C
0x00
0x00
0x47
VISOR: OFF
0x1D
0x00
0x00
0x46
VISOR: ON
0x1D
0x01
0x00
0x47
VISOR SHADE: 50% DARK
0x1E
0x00
0x00
0x45
VISOR SHADE: 100% DARK
0x1E
0x01
0x00
0x44
PIP: OFF
0x1F
0x00
0x00
0x44
PIP: ON
0x1F
0x01
0x00
0x45
PIP POSITION: BOTTOM LEFT
0x20
0x00
0x00
0x7B
37
Function
Data[0]
Data[1]
Data[2]
CheckSum
PIP POSITION: TOP LEFT
0x20
0x01
0x00
0x7A
PIP POSITION: TOP RIGHT
0x20
0x02
0x00
0x79
PIP POSITION: BOTTOM RIGHT
0x20
0x03
0x00
0x78
SPLITSCREEN: OFF
0x21
0x00
0x00
0x7A
SPLITSCREEN: ON
0x21
0x01
0x00
0x7B
SPLITSCREEN DIR: UPPER SCREEN
0x22
0x00
0x00
0x79
SPLITSCREEN DIR: LOWER SCREEN
0x22
0x01
0x00
0x78
SPLITSCREEN DIR: LEFT SCREEN
0x22
0x02
0x00
0x7B
SPLITSCREEN DIR: RIGHT SCREEN
0x22
0x03
0x00
0x7A
RECORDING: OFF
0x23
0x00
0x00
0x78
RECORDING: ON
0x23
0x01
0x00
0x79
MOVIE FAST REWIND
0x25
0x00
0x00
0x7E
MOVIE FAST FORWARD
0x25
0x01
0x00
0x7F
MOVIE VOL INC
0x26
0x00
0x00
0x7D
MOVIE VOL DEC
0x26
0x01
0x00
0x7C
RECORDING QUALITY: NORMAL
0x27
0x00
0x00
0x7C
RECORDING QUALITY: HIGH
0x27
0x01
0x00
0x7D
STORAGE: EMBEDDED
0x28
0x00
0x00
0x73
STORAGE: SD CARD
0x28
0x01
0x00
0x72
STORAGE: THUMB DRIVE
0x28
0x02
0x00
0x71
FORMAT: EMBEDDED
0x29
0x00
0x00
0x72
FORMAT: SD CARD
0x29
0x01
0x00
0x73
FORMAT: THUMB DRIVE
0x29
0x02
0x00
0x70
OUTPUT RESOLUTION: 1024x768
0x2F
0x01
0x00
0x75
OUTPUT RESOLUTION: 1280x720
0x2F
0x02
0x00
0x76
OUTPUT RESOLUTION: 1280x800
0x2F
0x60
0x00
0x72
OUTPUT RESOLUTION: 1920x1080
0x2F
0x03
0x00
0x77
OUTPUT RESOLUTION: 1280x1024
0x2F
0x04
0x00
0x70
OUTPUT RESOLUTION: 1600x1200
0x2F
0x05
0x00
0x71
38
Function
Data[0]
Data[1]
Data[2]
CheckSum
USB CONNECT: USB CAMERA
0x30
0x00
0x00
0x6B
USB CONNECT: MASS STORAGE
0x30
0x01
0x00
0x6A
BACKUP TO SD CARD
0x31
0x00
0x00
0x6A
BACKUP TO THUMBDRIVE
0x31
0x01
0x00
0x6B
PROFILE SAVE: PROFILE 1
0x32
0x00
0x00
0x69
PROFILE SAVE: PROFILE 2
0x32
0x01
0x00
0x68
PROFILE SAVE: PROFILE 3
0x32
0x02
0x00
0x6B
PROFILE RECALL: PROFILE 1
0x33
0x00
0x00
0x68
PROFILE RECALL: PROFILE 2
0x33
0x01
0x00
0x69
PROFILE RECALL: PROFILE 3
0x33
0x02
0x00
0x6A
SLIDESHOW: OFF
0x34
0x00
0x00
0x6F
SLIDESHOW: ON
0x34
0x01
0x00
0x6E
SLIDESHOW EFFECT: EFFECT 0
0x35
0x00
0x00
0x6E
SLIDESHOW EFFECT: EFFECT 1
0x35
0x01
0x00
0x6F
SLIDESHOW EFFECT: EFFECT 2
0x35
0x02
0x00
0x6C
SLIDESHOW EFFECT: EFFECT 3
0x35
0x03
0x00
0x6D
SLIDESHOW EFFECT: EFFECT 4
0x35
0x04
0x00
0x6A
SLIDESHOW EFFECT: EFFECT 5
0x35
0x05
0x00
0x6B
AUTO IMAGE:OFF
0x36
0x00
0x00
0x6D
AUTO IMAGE:ON
0x36
0x01
0x00
0x6C
CAPTURE QUALITY: NORMAL
0x37
0x00
0x00
0x6C
CAPTURE QUALITY: HIGH
0x37
0x01
0x00
0x6D
CAPTURE QUALITY: FINEST
0x37
0x02
0x00
0x6E
AUTO FOCUS
0x40
0x00
0x00
0x1B
MENU
0x41
0x00
0x00
0x1A
ARROW - DOWN
0x42
0x00
0x00
0x19
ARROW - UP
0x42
0x01
0x00
0x18
ARROW - LEFT
0x42
0x02
0x00
0x1B
ARROW - RIGHT
0x42
0x03
0x00
0x1A
ENTER
0x43
0x00
0x00
0x18
39
Function
Data[0]
Data[1]
Data[2]
CheckSum
FREEZE
0x44
0x00
0x00
0x1F
DEFAULT
0x45
0x00
0x00
0x1E
ZOOM -
0x46
0x00
0x00
0x1D
ZOOM +
0x46
0x01
0x00
0x1C
ZOOM RESET
0x47
0x00
0x00
0x1C
NEAR
0x48
0x00
0x00
0x13
FAR
0x48
0x01
0x00
0x12
LAMP OFF
0x49
0x00
0x00
0x12
LAMP ON
0x49
0x01
0x00
0x13
R
RS
S-
-2
23
32
2
G
Ge
et
t
C
Co
om
mm
ma
an
nd
d
T
Ta
ab
bl
le
e
Send Format︰0x52 + 0x0A + 0x01 + Data[0] + 0x53 + CheckSum
Receive Format︰0x53 + 0x0C + 0x01 + ReData[0] + 0x53 + ReCheckSum
*1 ：ReCheckSum = 0x0C xor 0x01 xor ReData[0] xor 0x52
4
4B
B
Function
Data[0]
CheckSum
Code
ReData[0]
RED VALUE
0x02
0x5A
VALUE[ 0 ~ 255 ]
BLUE VALUE
0x03
0x5B
VALUE[ 0 ~ 255 ]
POWER STATUS
0x04
0x5C
0 : OFF 1: ON
LAMP STATUS
0x05
0x5D
0 : OFF 1: ON
DISPLAY STATUS
0x06
0x5E
0: CAMERA MODE
1: PLAYBACK MODE
2: PC-1 PASS THROUGH
VIDEO OUTPUT STATUS
0x07
0x5F
0: VGA 1: TV
FREEZE STATUS
0x08
0x50
0 : OFF 1: ON
BRIGHTNESS VALUE
0x0A
0x52
VALUE[ 0 ~ 63 ]
CONTRAST VALUE
0x0B
0x53
VALUE[ 0 ~ 255 ]
40
T
Tr
ro
ou
ub
bl
le
es
sh
ho
oo
ot
ti
in
ng
g
This section provides many useful tips on how to solve common problems while using the
AVerVision M70HD.
There is no picture on the presentation screen.
1. Check all the connectors again as shown in this manual.
2. Check the on/off switch of the display output device.
3. Verify the setting of the display output device.
4. If you are presenting from a notebook or computer through the display output device, check the
cable connection from computer RGB (VGA) output to RGB input of AVerVision M70HD and
make sure AVerVision M70HD is in PC Mode.
5. For HDMI display output, a delay occurs while waiting for both the display device and M70HD to
sync up. Wait for around 4 to 7 seconds until you see the camera image on the screen.
I have set up the AVerVision M70HD and checked all the connections as specified in
the manual but I cannot get a picture on the preferred presentation screen.
1. The unit POWER button turns orange in standby mode. Press the POWER button again to turn
on and the LED light will turn blue.
2. The default camera display resolution setting is on 1024x768. If your output device does not
support this resolution; no image can be projected. Simply press hold the FREEZE and ► button
to the change the resolution setting.
3. If your display output device is on TV or any analog device, please sw itch the TV-RGB dip sw itch
to TV.
The picture on the presentation screen is distorted or the image is blurry.
1. Reset all changed settings, if any, to the original manufacturer default setting. Press DEFAULT on
the remote or select Default in Basic tab OSD menu.
2. Use the Brightness and Contrast menu functions to reduce the distortion if applicable.
3. If you discover that the image is blurry or out of focus, press the Auto Focus button on the control
panel or remote control.
There is no computer signal on presentation screen.
1. Check all the cable connections among the display device, AVerVision M70HD and your PC.
2. Connect your PC to the AVerVision M70HD first before you power on your computer.
3. For notebook, repeatedly press FN+F5 to toggles between display modes and display the
computer image on the presentation screen. For different command, please refer to your laptop
manual.
The presentation screen does not show the exact desktop image on my PC or
Notebook after I toggle from Camera to PC mode.
1. Return to your PC or Notebook, place the mouse on the desktop and right click, choose
“Properties”, choose “Setting” tab, click on “2” monitor and check the box “Extend my Window s
desktop onto this monitor”.
2. Then go back one more time to your PC or Notebook and place the mouse on the desktop and
right click again.
3. This time choose “Graphics Options”, then “Output To”, then “Intel® Dual Display Clone”, and
then choose “Monitor + Notebook”.
4. After you follow these steps, you should be able to see the same desktop image on your PC or
Notebook as well as on the presentation screen.
41
AVerVision M70HD can’t detect the inserted USB flash drive.
Make sure the USB flash drive sw itch is set to the right and check if the USB flash drive is properly
inserted.
The recorded video on MAC with the bundled software doesn’t have sound.
Due to some limitation, we recommend recording the audio directly from the MAC MIC IN port for
better audio quality.
42
L
Li
im
mi
it
te
ed
d
W
Wa
ar
rr
ra
an
nt
ty
y
For a period of time beginning on the date of purchase of the applicable product and
extending as set forth in the “Warranty Period of AVer Product Purchased” section of
the warranty card, AVer Information, Inc. (“AVer”) warrants that the applicable product
(“Product”) substantially conforms to AVer’s documentation for the product and that its
manufacture and components are free of defects in material and workmanship under
normal use. “You” as used in this agreement means you individually or the business entity
on whose behalf you use or install the product, as applicable. This limited warranty
extends only to You as the original purchaser. Except for the foregoing, the Product is
provided “AS IS.” In no event does AVer warrant that You will be able to operate the
Product without problems or interruptions, or that the Product is suitable for your purposes.
Your exclusive remedy and the entire liability of AVer under this paragraph shall be, at
AVe r’s option, the repair or replacement of the Product with the same or a comparable
product. This warranty does not apply to (a) any Product on which the serial number has
been defaced, modified, or removed, or (b) cartons, cases, batteries, cabinets, tapes, or
accessories used with this product. This warranty does not apply to any Product that has
suffered damage, deterioration or malfunction due to (a) accident, abuse, misuse, neglect,
fire, water, lightning, or other acts of nature, commercial or industrial use, unauthorized
product modification or failure to follow instructions included with the Product, (b)
misapplication of service by someone other than the manufacturer’s representative, (c)
any shipment damages (such claims must be made with the carrier), or (d) any other
causes that do not relate to a Product defect. The Warranty Period of any repaired or
replaced Product shall be the longer of (a) the original Warranty Period or (b) thirty (30)
days from the date of delivery of the repaired or replaced product.
Limitations of Warranty
AVer makes no warranties to any third party. You are responsible for all claims, damages, settlements,
expenses, and attorneys’ fees with respect to claims made against You as a result of Your
use or misuse of the Product. This warranty applies only if the Product is installed,
operated, maintained, and used in accordance with AVer specifications. Specifically, the
warranties do not extend to any failure caused by (i) accident, unusual physical, electrical,
or electromagnetic stress, neglect or misuse, (ii) fluctuations in electrical power beyond
AVer specifications, (iii) use of the Product with any accessories or options not furnished
by AVer or its authorized agents, or (iv) installation, alteration, or repair of the Product by
anyone other than AVer or its authorized agents.
Disclaimer of Warranty
EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, AVER DISCLAIMS ALL OTHER WARRANTIES WITH
RESPECT TO THE PRODUCT, WHETHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE,
INCLUDING WITHOUT LIMITATION, SATISFACTORY QUALITY, COURSE OF DEALING, TRADE
USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS.
43
Limitation of Liability
IN NO EVENT SHALL AVER BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT LIMITED
TO, LOSS OF PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS INTERRUPTION,
OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN
CONNECTION WITH THIS LIMITED WARRANTY, OR THE USE OR PERFORMANCE OF ANY
PRODUCT, WHETHER BASED ON CONTRACT OR TORT, INCLUDING NEGLIGENCE, OR ANY
OTHER LEGAL THEORY, EVEN IF AVER HAS ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. AVER’S TOTAL, AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE,
REGARDLESS OF FORM OF ACTION, SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY
YOU TO AVER FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED.
Governing Law and Your Rights
This warranty gives you specific legal rights; You may also have other rights granted under
state law. These rights vary from state to state.
For warranty period, please refer to the warranty card.