Beko HTV 8736 XSHTR User Manual
Displayed below is the user manual for HTV 8736 XSHTR by Beko which is a product in the Washer Dryers category. This manual has pages.
Related Manuals
Washer-Dryer
User Manual
HTV 8736 XSHTR
2820529330_EN/ 23-03-21.(9:40)
Document Number :
Please read these instructions
first before using your appliance
Dear Customer,
Thank you for choosing a Beko appliance.
Please take some time to read this user manual
before using your appliance, to ensure you know
how to safely operate the controls and functions.
Carefully follow all unpacking and installation
instructions to ensure the appliance is correctly
connected and fitted prior to use. Please write
your product model and serial number on the
last page of this user manual, and store in a
safe location close to the appliance for easy
future reference. This user manual may also be
applicable for several other models. Differences
between models will be listed. If you have any
questions or concerns, please call our contact
centre or find help and information online at
www.beko.co.uk
Explanation of symbols used throughout this
User Manual
B
DANGER!
• Warning for electric shock.
DANGER!
• Product weight warning
DANGER!
• Fire risk warning.
A
CAUTION!
• Warning for hazardous situations with
regard to life and property.
A
PRECAUTION!
• Precautions that need to be taken.
C
INFORMATION
• Important information or useful hints about
usage.
• Read user manual.
• Packaging materials of the
product are manufactured
from recyclable materials in
accordance with regulations.
• Do not dispose of the
Packaging materials together
with the domestic or other
wastes. Take them to the
packaging material collection
points designated by the local
authorities.
• Allergy UK, is the brand of
British Allergy Association. Their
main endorsement is the ‚Seal
of Approval‘. When you see
a product with this logo on it,
you have the reassurance the
product has been scientifically
tested to prove it is efficient at
reducing/removing allergens
from the environment of allergy
and asthma sufferers or the
products have significantly
reduced allergen/chemical
content.
This product was manufactured using the latest technology in environmentally friendly conditions.
3 / EN Washer-Dryer / User Manual
1 Important instructions for safety and environment
This section contains safety instructions
that will help protect from risk of personal
injury or property damage. Failure to follow
these instructions shall void any warranty.
1.1 General safety
A
CAUTION!
• This product can be used by
children at and above 8 years old
and by persons whose physical,
sensory or mental capabilities are
not fully developed or who lack
experience and knowledge provided
that they are supervised or trained
on the safe use of the product and
the risks involved. Children should
not play with the product. Cleaning
and maintenance works should not
be performed by children unless
they are supervised by someone.
Children under the age of 3 must be
kept away from the product unless
they are continuously supervised.
A
WARNING!
• Never place the product on a carpet-
covered floor. Otherwise, lack of
airflow beneath the product will cause
electrical parts to overheat. This will
cause problems with your product.
C
INFORMATION
• Always have the installation
procedures carried out by
authorised persons. The
manufacturer shall not be held
liable for damages that may arise
from procedures carried out by
unauthorised persons.
1.1.1 Electrical safety
B
DANGER!
• If the product has a failure, it should
not be operated unless it is repaired
by the Authorised Service Agent.
There is risk of electric shock!
• Never wash the product by
spreading or pouring water onto it!
There is risk of electric shock!
A
CAUTION!
• If the power cable is damaged, it must
be replaced by the manufacturer, after
sales service or a similarly qualified
person (preferably an electrician) or
someone designated by the importer
in order to avoid possible risks.
A
WARNING!
• Unplug the product when it is not
in use.
• Never touch the plug with wet hands!
Never unplug by pulling on the cable,
always pull out by grabbing the plug.
• Unplug the product during installation,
maintenance, cleaning and repair.
• Do not make connections via
extension cables or multi-plugs.
C
INFORMATION
• This product is designed to resume
operating in the event of powering
on after a power interruption. If you
wish to cancel the programme, see
"Cancelling the programme" section.
4 / EN Washer-Dryer / User Manual
1.1.2 Product safety
B
DANGER!
• Never open the loading door or remove
the filter while there is still water in the
drum. Otherwise, risk of flooding and
injury from hot water will occur.
A
CAUTION!
• The water supply and draining
hoses must be securely fastened
and remain undamaged. Otherwise,
there is the risk of water leakage.
C
INFORMATION
• Do not force open the locked loading
door. The door will open immediately
after the washing cycle has ended. If
the machine is not cooled enough at
the end of the programme, the loading
door cannot be opened. Wait for the
product to cool down. If the door still
does not open, apply the solutions
provided for "Loading door cannot
be opened" in the Troubleshooting
section. Do not force the loading door
to open. The loading door and the lock
mechanism may get damaged.
• In the location where this product is
going to be installed, there must be
no doors with a lock, bolt or hinge
that will prevent the loading door
from opening completely.
• Follow the instructions on the textile
tags and on the detergent package.
• Use detergents, softeners and
supplements suitable for washing
machines only.
C
INFORMATION
• Do not install or leave the product in
places where it might be exposed to
outdoor conditions.
• Do not play with control elements of
the product.
• If a non-self-resetting thermal cut-out
is required in order to comply with
the standard then the instructions for
appliances incorporating a non-self-
resetting thermal cutout that is reset
by disconnection of the supply mains
shall contain the substance of the
following:
CAUTION:
In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
1.1.3 Warnings about drying
DANGER!
• Laundry that has previously been
washed, cleaned, soiled or stained
with petrol/gas, dry cleaning solvents
or other inflammable/combustive
substances must not be dried in the
machine since they emit inflammable/
combustive vapour. Otherwise, there
will be the risk of fire.
• Laundry soiled with vegetable
oil, alcohol, petrol, gas oil, stain
remover, turpentine, wax or wax
remover must be washed with
hot water and a great amount of
detergent before drying. Otherwise,
there will be the risk of fire.
5 / EN Washer-Dryer / User Manual
DANGER!
• Rubber (latex) foam, shower caps,
waterproof fabrics, clothes and
rubber-reinforced/rubber-foam
pillows must not be dried with the
drying function. Otherwise, there will
be the risk of fire.
• If you use laundry balls, measuring
scoops or laundry cage in your
machine, these products might melt
during the drying process. If you are
going to select the drying function, do
not use these products. Otherwise,
there will be the risk of fire.
• If you are using industrial chemicals
for cleaning, do not use the drying
function. Otherwise, there will be the
risk of fire.
B
DANGER!
• Do not touch the glass of the
loading door with bare hands after
drying. There is the risk of burning.
• There is a final step, which is
cooling, to keep the laundry at a
certain temperature to ensure that
it is not damaged. You may be
exposed to hot steam if you open
the door before cooling is complete.
There is the risk of scalding.
• If the drying programmes are
interrupted (due to programme
cancellation or power failure), the
laundry in the machine might be
hot. Be careful.
A
CAUTION!
• Do not stop the machine before the
drying programme is completed.
If you have to do so, remove all
laundry, place it at an appropriate
place and wait for it to cool down.
• Your product is designed to work at
temperatures between 0°C and +35°C.
• Ambient temperatures between
15°C and +25°C are suitable for
your product.
• Do not let pets enter the product. Check
inside of the product before using it.
• Do not overload the machine to dry
laundry. Observe the maximum load
levels stated for drying.
A
WARNING!
• Do not use the machine to dry
leather clothes or clothes that contain
leather (such as leather labels on
jeans). The colour of the leather parts
might affect other fabrics.
• If there is a problem you cannot solve
by using the information given in the
safety instructions section, switch off
and unplug the machine and call the
Authorised Service Agent.
• You can use your washer-dryer to
only wash, only dry or both wash and
dry laundry. The machine must not
be used to dry wet laundry only for a
long time. When using the machine
only for drying purposes, run a
washing programme with the machine
unloaded after every 15 drying cycles.
6 / EN Washer-Dryer / User Manual
A
WARNING!
• Before loading the machine, check
each laundry item and make sure
that there is no lighter, change,
metal objects, needles etc. inside
them or in their pockets.
• Underwear with metal supports
must not be dried in the machine.
Metal supports might come off
during the drying process and
damage the machine. Place them in
a bag or a pillowcase.
• Do not use the machine to dry large
laundry such as tulle, curtains,
sheets/bedding, blanket or rugs.
Your laundry might get damaged.
C
INFORMATION
• Do not dry unwashed laundry in the
machine.
• Do not use softeners or antistatic
agents unless recommended by the
manufacturer.
• Products such as softeners must
be used in accordance with the
manufacturer’s instructions.
• Do not use the machine to dry silk,
wool and similar delicate clothes.
Otherwise, woollen clothes may
shrink, and other delicate clothes
might get damaged.
• Check the symbols on the label of the
clothes before washing and drying.
• The water supply pressure required
to run the product is between 1 to
10 bars (0.1 – 1 MPa).
• Do not use old or used water inlet
hoses on the new product. It may
cause stains on your laundry.
1.2 Intended use
C
INFORMATION
• This product has been designed for
domestic use. It is not suitable for
commercial use and it must not be
used out of its intended use.
• The product must be used to wash,
rinse and dry only the textile products
that have the relevant marking.
• The manufacturer waives any
responsibility arisen from incorrect
usage or transportation.
• The service life of your product is
10 years. During this period, original
spare parts will be available for the
product to operate properly.
• This appliance is intended to be
used in household and similar
applications such as:
– staff kitchen areas in shops, offices
and other working environments;
– farm houses;
– by clients in hotels, motels and
other residential type environments;
– bed and breakfast type
environments;
– areas for communal use in blocks
of flats or in launderettes.
7 / EN Washer-Dryer / User Manual
1.3 Children's safety
A
CAUTION!
• Children under the age of 3 must be
kept away from the product unless
they are continuously supervised.
• Packaging materials are dangerous
to children. Keep packaging
materials in a safe place away from
reach of the children.
• Electrical products are dangerous for
children. Keep children away from
the product when it is in use. Do not
allow them to play with the product.
Use child lock to prevent children
from intervening with the product.
• Do not forget to close the loading
door when leaving the room where
the product is located.
• Store all detergents and additives in
a safe place away from the reach of
the children by closing the cover of
the detergent container or sealing
the detergent package.
1.4 Compliance with the
WEEE Directive and disposing
of the waste product
This product does not contain the harmful and
prohibited materials described in the “Directive
on the Management of Waste Electrical and
Electronic Equipment”. It complies with the
WEEE Directive.
This product has been
manufactured with high quality parts
and materials which can be reused
and are suitable for recycling.
Therefore, do not dispose of the
product with normal domestic
waste at the end of its service life.
Take it to a collection point for the
recycling of electrical and electronic
equipment. Please consult your
local authorities to learn about the
nearest collection point.
2 Your washer-dryer
2.1 Overview
1
2
3
4
5
6
7
8
1- Power cable 5- Loading door
2- Top panel 6- Filter cover
3- Control panel 7- Adjustable feet
4- Water discharge
hose
8- Detergent drawer
Help protect the environment and natural
resources by recycling used products. For
children’s safety, cut the power cable and
break the lock mechanism of the loading door
to make the product non-functional before
disposal.
Compliance with the RoHS Directive
This product complies with the RoHS Directive
No. 2011/65/EU. It does not contain harmful or
prohibited materials stated in the directive.
1.5 Package information
Packaging materials of the product are
manufactured from recyclable materials in
accordance with our National Environment
Regulations. Do not dispose of the packaging
together with normal domestic waste. Take
them to the packaging material collection points
designated by local authorities.
8 / EN Washer-Dryer / User Manual
2.2 Package contents
Power cable
Water discharge hose
Transit bolts
Mains water inlet hose
Liquid detergent container (*)
User manual
Plastic plug group
C
INFORMATION
• Figures in this manual are schematic and may not match the product exactly.
(*) This may be supplied with the machine depending on the model of your product.
9 / EN Washer-Dryer / User Manual
2.3 Technical specifications
A
WARNING!
• Consumption values are applicable for cases where the wireless network connection is off.
C
INFORMATION
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
• The model information as stored in the product
database can be reached by entering following
website and searching for your model identifier (*)
found on energy label.
https://eprel.ec.europa.eu/
Supplier name or trademark Beko
Model name HTV 8736 XSHTR
7162545300
Maximum spin speed (rpm) 1400
Washing capacity (cotton) (kg) 8
Drying capacity (cotton) (kg) 5
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 59
Single Water inlet / Double Water inlet • / -
• Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 1420
Rinse Spin+Drain
Prewash Fast Fast+ Extra
Rinse
Extra
Water
Anti
Crease
Pet Hair
Removal
Rinse
Hold
No
Water
Drain
Soaking
Spin No
Spin
Tap
Water
(Cold)
Steam
Time
Delay
Night
Modu
Temperature Door
Lock
Child
Lock
On/Off Start /
Pause
Soil Level Add
Garment
AutoDose Liquid
Detergent
Selection
Softener
Selection
Wash
Downloaded
Program
Steeping
Ok
(End)
Cancel AntiCrease+ Iron
Dry
Cupboard
Dry
Extra
Dry
Timed
Drying
Clean&
Wear
Symbols Table
Drying
10 / EN Washer-Dryer / User Manual
3 Installation
To make the product ready for use, review the
information in the user manual and make sure
that the electricity, tap water supply and water
drainage systems are appropriate. If they are
not, call a qualified technician and plumber to
have any necessary arrangements carried out.
B
DANGER!
• Make sure that the installation and
electrical connections of the product
are performed by competent persons.
Manufacturer shall not be held liable for
damages that may arise from procedures
carried out by unauthorised persons.
DANGER!
• Your product is too heavy for one person
to carry.
A
CAUTION!
• Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed. Damaged products cause
risks for your safety.
A
PRECAUTION!
• Preparation of the location and electrical,
tap water and waste water installations at
the place of installation is under customer’s
responsibility.
• Make sure that the water inlet and
discharge hoses as well as the power
cable are not folded, pinched or crushed
while pushing the product into its place
after installation or cleaning procedures.
3.1 Appropriate
installation location
• Place the product on a solid and level
floor. Do not place it onto a carpet with
high pile or other similar surfaces.
• Do not place the product close to the
edge if the floor contains steps. Do not
also place the product on a platform.
• Do not place the product on the power cable.
• Do not install the product in environments
where the temperature falls below
0 ºC.(See. Warnings for Drying)
• Leaving a gap at the sides of the machine
is suggested to reduce vibration and noise
• In the area where this product is
installed, there must not be a lockable,
sliding or hinged door that will restrict
the full opening of loading door.
• Operate the product in a well ventilated
and dust free environment.
• Do not place heat sources such as Hobs,
Irons, Ovens, etc. on the washing machine
and do not use them on the product.
3.2 Removing packaging
reinforcement
Tilt the machine
backwards to remove
the packaging
reinforcement.
Remove the
packaging
reinforcement
attached to the
ribbon.
DANGER!
• Your product is heavy. Remove packaging
reinforcement as displayed in the figure.
• Be careful not to get your hand caught
under the machine during this procedure.
3.3 Removing the transit bolts
A
PRECAUTION!
• Do not remove the transit bolts before
removing the packaging reinforcement.
• Remove the transit bolts before operating
the washing machine! Otherwise, the
product will get damaged.
11 / EN Washer-Dryer / User Manual
3
2
1
1 Use a tool to
loosen all bolts until
they rotate freely.
3
2
1
2 Remove the transit
bolts by turning
them slightly.
3
2
1
3 Attach the plastic
covers supplied in
the user manual
bag into the holes
on the rear panel.
C
INFORMATION
• Keep the transit bolts in a safe place to
reuse when the product needs to be
moved again in the future.
• Never move the product without the transit
bolts properly fixed in place!
3.4 Connecting water supply
C
INFORMATION
• It is necessary to have 10 – 80 liters of
water flowing from the fully open tap in one
minute to have your product run smoothly.
Attach a pressure reducing valve if water
pressure is higher.
A
CAUTION!
• Models with a single water inlet should not
be connected to the hot water tap. In such
a case the laundry will get damaged or the
product will switch to protection mode and
will not operate.
1 2 3
1 Connect the special
hose supplied
with the product
to the water inlet
on the product.
A
CAUTION!
• Ensure that the cold water connection is
made correctly when installing the product.
Otherwise, your laundry will come out hot
at the end of the washing process and
wear out.
1 2 3
2 Tighten the hose
nuts securely
by hand. Never
use a tool when
tightening the nuts.
1 2 3
3 Open the taps
completely after
making the hose
connection to
check for water
leaks at the
connection points.
If any leak occurs, turn off the tap and remove
the nut. Retighten the nut carefully after
checking the seal. In order to prevent the
water leaks, keep the taps closed when you
do not use the product.
3.5 Connecting to the drain
• Attach the end of the drain hose directly
to waste water drain, sink or bathtub.
A
CAUTION!
• Your house will be flooded if the
hose comes out of its housing during
water discharge. Moreover, there is
risk of scalding due to high washing
temperatures! To prevent such situations
and to ensure smooth water intake and
discharge of the machine, fix the end of
the discharge hose tightly so that it cannot
displace.
12 / EN Washer-Dryer / User Manual
90 cm
90
40
90
40
90 cm
90 cm
min.40
90 cm
90
40
90
40
90 cm
90 cm
min.40
90 cm
90
40
90
40
90 cm
90 cm
min.40
• Connect the hose to a minimum height of
40 cm and a maximum height of 90 cm.
• If the hose is run along the floor (or at less
than 40 cm above it) and raised later on,
water drain becomes difficult and laundry
may come out extremely wet. Therefore,
observe the heights described in the figure.
• To prevent flowing of dirty water back into
the machine and to allow for easy discharge,
do not immerse the hose end into the dirty
water or do not drive it in the drain more
than 15 cm. If it is too long, cut it short.
• The end of the hose should not be
bent, it should not be stepped on
and the hose must not be pinched
between the drain and the machine.
• If the length of the hose is too short, add an
original extension hose. Length of the hose
may not be longer than 3.2 m. To avoid water
leak failures, the connection between the
extension hose and the drain hose of the
product must be fitted well with an appropriate
clamp as not to come off and leak.
3.6 Adjusting the feet
A
CAUTION!
• Adjust feet so that the product will be
balanced in the location it will be used.
• Balance the machine by adjusting the feet.
• Check for any play by pressing the product
from upper diagonal edges.
• Otherwise, the product may move from
its place and cause crushing, noise and
vibration problems.
• Do not use any tools to loosen the lock
nuts. Otherwise, the lock nuts may get
damaged.
a) Loosen the lock nuts on the feet by hand.
b) Adjust the feet until the product stands level
and balanced.
c) Tighten all lock nuts again by hand.
3.7 Electrical connection
Connect the product to a grounded outlet
protected by a 16 A fuse. Our company shall
not be liable for any damages that will arise
when the product is used without grounding in
accordance with the local regulations.
• Connection must comply with
national regulations.
• The wiring for the electrical outlet circuit
must be sufficient to meet the appliance
requirements. Use of a Ground Fault Circuit
Interrupter (GFCI) is recommended.
• Power cable plug must be within
easy reach after installation.
• If the current value of the fuse or breaker
in the house is less than 16 Amps, have a
qualified electrician install a 16 Amp fuse.
13 / EN Washer-Dryer / User Manual
• The voltage specified in the “Technical
specifications” section must be
equal to your mains voltage.
B
DANGER!
• Damaged power cables must be replaced
by the Authorised Service Agent.
3.8 Transportation of the product
1 Unplug the product before transporting it.
2 Remove water drain and water
supply connections.
3 Drain all water that has remained
in the product. See 6.5
4 Install the transit bolts in reverse order of
the disassembly procedure. See 3.3
DANGER!
• Your product is too heavy for one person
to carry.
• Your product is heavy; two persons must
carry it and extra precaution taken on
stairs. If your product falls on you, it may
cause injuries.
A
CAUTION!
• Packaging materials are dangerous to
children. Keep packaging materials in a
safe place away from reach of the children.
C
INFORMATION
• Never move the product without the transit
bolts properly fixed in place!
4 Preparation
4.1 Sorting the laundry
* Sort laundry according to type of
fabric, colour, degree of soiling and
the suitable water temperature.
* Always obey the instructions
given on the garment tags.
4.2 Preparing the laundry for washing
• Underwire bras and clothes with metal pieces
such as buckles or buttons damage the
machine. Remove the metal pieces or wash
such clothes after putting them in a cotton
laundry bag or cotton pillow case. Moreover,
this type of clothes may overheat during the
drying process and damage other clothes.
Do not use the machine to dry such clothes.
• Put small size clothes such as infant's
socks and nylon stockings in cotton a
laundry bag or cotton pillow case.
• Place curtains in without compressing
them. Remove curtain attachment items.
Do not dry tulle curtains in your machine.
• Fasten zippers, sew loose buttons
and mend rips and tears.
• Wash “Machine washable” or “Hand
washable” labelled products only with
an appropriate programme. Dry them by
hanging them or laying them flat. Do not
use the machine to dry such clothes.
• Do not wash colours and whites together.
New, dark coloured cottons release a
lot of dye. Wash them separately.
• Only use the dyes / colour changers and
descaling agents which are appropriate
to machine wash. Always follow the
instructions on the package.
14 / EN Washer-Dryer / User Manual
C
INFORMATION
• Laundry that are subjected to materials
such as flour, lime dust, milk powder, etc.
intensely must be shaken off before being
placed into the machine. Such dusts and
powders on the laundry may build up on the
inner parts of the product in time and can
cause damage.
• Keep laundry items made of Angora wool in
a plastic bag in the freezer for a few hours
before washing. This can reduce piling.
• Wash trousers and delicate laundry turned
inside out.
• Tough stains must be treated properly
before washing.
• Take out all substances in the pockets such
as coins, pens and paper clips, and turn
pockets inside out and brush if possible.
Such objects may damage the product or
cause noise problem.
4.3 Tips for energy and water saving
Following information will help you use the product
in an ecological and energy/water-efficient manner.
• Operate the product in the highest load
capacity allowed for the programme you
have selected, but do not overload. See,
“Programme and consumption table”.
• Observe the temperature instructions
on the detergent packaging.
• Wash slightly soiled laundry at low temperatures.
• Use faster programmes for small
quantities of lightly soiled laundry.
• Do not use prewash and high temperatures
for laundry that is not heavily soiled or stained.
• If you plan to dry your laundry in a
dryer, select the highest spin speed
recommended during washing process.
• Do not use more detergent than the
recommended on the detergent packaging.
4.4 First use
Before starting to use
the product make sure
that all preparations are
made in accordance
with the “Important
safety and environment
instructions” and the
instructions in the
“Installation” section.
To prepare the product for washing laundry,
perform first operation in Drum Cleaning
programme. If this programme is not available
on your machine, apply the method described
in section 6.2.
C
INFORMATION
• Use an anti-limescale agent suitable for
washing machines.
• Some water has remained in the product
due to the quality control processes in the
production. It is not harmful for the product.
4.5 Correct load capacity
The maximum load capacity depends on the
type of laundry, the degree of soiling and the
selected washing programme.
The product automatically adjusts the water
amount according to the weight of the laundry
put inside it.
A
CAUTION!
• Follow the information in the “Programme
and consumption table”. When overloaded,
machine's washing performance will drop.
Moreover, noise and vibration problems
may occur. For a good drying performance,
do not load the machine with more laundry
than recommended.
Laundry
type
Weight
(g)
Laundry
type
Weight
(g)
Bathrobe 1200 Hand towel 100
Fabric napkin 100 Nightgown 200
Bed sheet 700 Underclothing 100
Bed sheet 500 Men’s work shirts 600
Pillowcase 200 Men’s shirt 200
Tablecloth 250 Men’s pyjamas 500
Towel 200 Blouses 100
4.6 Loading the laundry
1. Open the loading door.
2. Place the laundry loosely in the product.
3. Push the loading door to close it until
you hear a locking sound. Ensure that
no items are caught in the door.
15 / EN Washer-Dryer / User Manual
C
INFORMATION
• The loading door is locked while a programme
is running. The door lock will open
immediately after the washing programme has
ended. If the inner part of the machine is too
hot at the end of the programme, the loading
door will not open until the temperature drops.
If the door does not open, apply the solutions
provided for "Loading Door Cannot be
Opened." error in the Troubleshooting section.
A
CAUTION!
• If the laundry is misplaced, noise and
vibration problems may occur in the machine.
4.7 Using detergent and softener
C
INFORMATION
• When using detergent, softener, starch,
fabric dye, bleach or limescale remover,
read the manufacturer's instructions on the
package carefully and follow the suggested
dosage values. Use measuring cup if any.
4.7.1 Detergent drawer
The detergent drawer is composed of three
compartments:
1
3
2
– (1) for prewash
– (2) for main wash
– (3) for softener
–( ) in addition, there
is a siphon part in the
softener compartment.
4.7.2 Detergent, softener
and other cleaning agents
• Add detergent and softener before
starting the washing programme.
• Never leave the detergent drawer open
while the washing programme is running!
• When using a programme without prewash,
do not put liquid detergent into the prewash
compartment (compartment no. "1").
• In a programme with prewash, put
liquid detergent into the prewash
compartment (compartment no. “1”).
• Do not select a programme with prewash if
you are using a detergent bag or dispensing
ball. Place the detergent bag or the
dispensing ball directly among the laundry
in the machine. Remove them after drying.
• If you are using liquid detergent, do not forget
to place the liquid detergent container into the
main wash compartment (compartment no. 2).
• When the machine is in Drying step,
do not add any washing chemicals
(Liquid detergent, Softener, etc.).
4.7.3 Choosing the detergent type
Detergent type to be used depends on the
washing programme, fabric type and colour.
• Use different detergents for
coloured and white laundry.
• Wash your delicate clothes only with
special detergents (liquid detergent, wool
shampoo, etc.) intended solely for delicate
clothes and at suggested programmes.
• When washing dark coloured clothes and quilts,
it is recommended to use liquid detergent.
• Wash woollens at suggested programme with
special detergent made specifically for woollens
• Please review the programme descriptions part
for suggested programme for different textiles.
• All recommendations about detergents are valid
for selectable temperature range of programmes.
A
CAUTION!
• Use only detergents manufactured
specifically for washing machines.
• Do not use soap powder.
4.7.4 Adjusting the
amount of detergent
The amount of washing detergent to be used
depends on the amount of laundry, the degree
of soiling and water hardness.
• Do not use amounts exceeding the dosage
quantities recommended on the detergent
package to avoid problems of excessive
foam, poor rinsing, financial savings
and finally, environmental protection.
• Use less detergent for small loads,
lightly soiled clothes and short duration
programmes, especially in soft water areas.
16 / EN Washer-Dryer / User Manual
4.7.5 Using softeners
Pour the softener into the softener compartment
of the detergent drawer.
• Do not exceed the (>max<) level marking
in the softener compartment.
• If the softener has lost its fluidity or if it is
concentrated, dilute it with water before
putting it in the detergent drawer.
4.7.6 Using liquid detergents
4.7.6.1 If the product contains
a liquid detergent container
• Place the liquid detergent container
in compartment no. “2”.
• If the liquid detergent has lost its fluidity, dilute it
with water before putting in the compartment.
2
4.7.6.2 If the product is equipped
with a liquid detergent apparatus:
• When you want to use liquid detergent,
press on the point shown to rotate the
apparatus. The part that falls off will function
as a barrier for the liquid detergent.
•
If required, clean the apparatus with water
when it is in place or by removing it.
• If you will use powder detergent, the
apparatus must be secured at top position.
4.7.6.3 If the product does not
contain a liquid detergent container
• Do not use liquid detergent for the
prewash in a programme with prewash.
• Liquid detergent stains your clothes
when used with Delayed Start function.
If you are going to use the Delayed Start
function, do not use liquid detergent.
4.7.7 Using gel and tablet detergent
• If the gel detergent thickness is fluidal and
your machine does not contain a special
liquid detergent container, put the gel
detergent into the main wash detergent
compartment during first water intake. If
your machine contains a liquid detergent
container, fill the detergent into this
container before starting the programme.
• If the gel detergent thickness is not fluidal
or in the shape of capsule liquid tablet, put
it directly into the drum before washing.
• Put tablet detergents into the main wash
compartment (compartment no. "2") or
directly into the drum before washing.
C
INFORMATION
• Tablet detergents may leave residues in the
detergent compartment. If you encounter
such residues, place the tablet detergent
between the laundry, close to the lower part
of the drum in future washings.
• Use the tablet or gel detergent without
selecting the prewash function.
C
INFORMATION
• Before drying, remember to remove objects
such as the plastic detergent container from
the drum.
4.7.8 Using laundry starch
• Add liquid starch, powder starch or the
fabric dye into the softener compartment.
• Do not use softener and starch
together in a washing cycle.
• Wipe the inside of the machine with a
damp and clean cloth after using starch.
4.7.9 Using bleach
• Select a programme with prewash and add the
bleach at the beginning of the prewash. Do not
put detergent in the prewash compartment.
Alternatively, select a programme with an
extra drying step, add the bleach to the empty
detergent compartment and once you see the
rinsing step on the display for the first time, add
1 glass of water into the same compartment.
• Do not use bleach and detergent
by mixing them.
17 / EN Washer-Dryer / User Manual
• Use just a little amount (approximately
50 ml) of bleach and rinse the clothes
very well as it causes skin irritation. Do
not pour the bleach onto the laundry and
do not use it with the coloured items.
• When using oxygen-based bleaches,
select a programme that washes the
laundry at a low temperature.
• You can use oxygen-based bleaches
together with the detergent. However, if it
has a different consistency, first add the
detergent into the detergent compartment
no “2” and wait for the machine to take in
the detergent together with water. While
the product continues taking in water,
add bleach in the same compartment.
4.7.10 Using limescale remover
• When required, use limescale
removers manufactured specifically
for washing machines only.
4.8 Tips for efficient washing
Clothes
Light Colours and
Whites Colours Black/Dark
Colours
Delicates/
Woollens/Silks
(Recommended temperature range
based on soiling level: 40-90˚C)
(Recommended temperature range
based on soiling level: cold -40˚C)
(Recommended
temperature range based
on soiling level: cold -40˚C)
(Recommended temperature
range based on soiling level:
cold -30˚C)
Soiling Level
Heavily Soiled
(difficult stains such as grass,
coffee, fruits and blood.)
It may be necessary to pre-treat the
stains or perform prewash. Powder
and liquid detergents recommended
for whites can be used at dosages
recommended for heavily soiled
clothes. It is recommended to use
powder detergents to clean clay and
soil stains and the stains that are
sensitive to bleaches.
Powder and liquid detergents
recommended for coloured
laundry can be used at dosages
recommended for heavily soiled
clothes. It is recommended to use
powder detergents to clean clay and
soil stains and the stains that are
sensitive to bleaches. Detergents
which do not contain bleach should
be used.
Liquid detergents suitable
for colours and dark
colours can be used at
dosages recommended for
heavily soiled clothes.
Prefer liquid detergents
produced for delicate clothes.
Woollen and silk clothes
must be washed with special
woollen detergents.
Normally
Soiled
(For example, stains
caused by body on
collars and cuffs)
Powder and liquid detergents
recommended for whites can be
used at dosages recommended for
normally soiled clothes.
Powder and liquid detergents
recommended for colours can be
used at dosages recommended for
normally soiled clothes. Detergents
which do not contain bleach should
be used.
Liquid detergents suitable
for colours and dark
colours can be used at
dosages recommended for
normally soiled clothes.
Prefer liquid detergents
produced for delicate clothes.
Woollen and silk clothes
must be washed with special
woollen detergents.
Lightly
Soiled
(No visible stains
exist.)
Powder and liquid detergents
recommended for whites can be
used at dosages recommended for
lightly soiled clothes.
Powder and liquid detergents
recommended for colours can be
used at dosages recommended for
lightly soiled clothes. Detergents
which do not contain bleach should
be used.
Liquid detergents suitable
for colours and dark
colours can be used at
dosages recommended for
lightly soiled clothes.
Prefer liquid detergents
produced for delicate clothes.
Woollen and silk clothes
must be washed with special
woollen detergents.
18 / EN Washer-Dryer / User Manual
4.9 Tips for correct drying
Programmes
Cottons Drying Synthetics Drying Babyprotect + Washing and Drying Wash&Wear
Types of Clothes
Durable Clothes with
Cotton-Content
Sheet, bedding, baby
clothes, t-shirts, sweatshirts,
durable knit clothing, jeans,
canvas trousers, shirts,
cotton socks etc.
Not recommended!
Washes and dries
respectively! Sheet,
bedding, baby clothes,
t-shirts, sweatshirts,
durable knit clothing,
jeans, canvas trousers,
shirts, cotton socks etc.
Washes and dries respectively!
Sheet, bedding, baby clothes,
t-shirts, sweatshirts, durable
knit clothing, jeans, canvas
trousers, shirts, cotton socks
etc.
Stainless clothes that has
been worn for a short time
such as shirts, t-shirts,
sweatshirts A very small
amount of laundry must
be loaded.
Synthetics Clothes
(Polyester, nylon, etc.)
Not recommended!
It is recommended for the
polyester, nylon, polyacetate,
acrylic-content clothes. Drying
is not recommended for the
viscose-content clothes. Drying
explanations in the maintenance
label should be taken into
account.
It is recommended
for polyester, nylon,
polyacetate, acrylic
content clothes at low
temperatures, taking into
account the washing and
drying warnings on the
care label.
It is recommended for
polyester, nylon, polyacetate,
acrylic content clothes at low
temperatures, taking into
account the washing and
drying warnings on the care
label.
Lightly soiled and stainless
shirts, t-shirts and
synthetic-content clothes.
A very small amount of
laundry should be loaded.
Delicate (Silk, Woollens,
Cashmere, Angora wool,
etc. content) Clothes
Not recommended! Not recommended! Not recommended! Not recommended! Not recommended!
Bulky laundry such
as blankets, coats,
curtains etc.
Not recommended! It is
not appropriate to dry bulky
laundry in the washer. Dry
them by hanging them or
laying them flat.
Not recommended! It is not
appropriate to dry bulky laundry
in the washer. Dry them by
hanging them or laying them flat.
Not recommended! It
is not appropriate to
dry bulky laundry in the
washer. Dry them by
hanging them or laying
them flat.
Not recommended! It is
not appropriate to dry bulky
laundry in the washer. Dry
them by hanging them or
laying them flat.
Not recommended! It is
not appropriate to dry bulky
laundry in the washer. Dry
them by hanging them or
laying them flat.
4.10 Displayed Programme Time
You can see the programme duration on
the display of your machine while selecting
a programme. Depending on the amount of
laundry you have loaded into your machine,
foaming, unbalanced load conditions,
fluctuations in power supply, water pressure
and programme settings, the programme
duration is automatically adjusted while the
programme is running.
SPECIAL CASE:
At programme start of
Cottons and Cotton Eco programmes, display
shows the duration of half load, which is the
most common use case. After programme
starts, in 20-25 minutes actual load is detected
by the machine. And if the detected load is
higher than half load; washing programme
will be adjusted accordingly and programme
duration increased automatically. You may follow
this change on the display.
19 / EN Washer-Dryer / User Manual
5 Operating the product
5.1 Control panel
12 3 4
79 8101112 6 5
1 - Programme selection knob
2 - Temperature level lights
3 - Spin speed level lights
4 - Display
5 - Start/Pause button
6 - Remote Control button
7 - End Time Adjustment button
8 - Drying Level Adjustment Button
9 - Auxiliary function button 2
10 - Auxiliary function button 1
11 - Spin speed adjustment button
12 - Temperature adjustment button
5.2 Display Symbols
1400
1200
800
600
90
˚
60
˚
40
˚
30
˚
20
˚
a b c d e
f
h
g
ikl jno mpr
a - Temperature indicator
b - Spin speed indicator
c - Duration information
d - Door lock engaged symbol
e - Programme follow-up indicator
f - No water indicator
g - Add laundry indicator
h - Bluetooth connection indicator
i - Remote Control indicator
j - Delayed Start enabled indicator
k - Drying level indicator
l - Child lock enabled symbol
m - Auxiliary function indicators 2
n - Auxiliary function indicators 1
o - No spin indicator
p - Rinse hold indicator
r - Cold water indicator
5.3 Preparing the Machine
1. Check if the hoses are connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
5.4 Selecting a washing
programme
1. In accordance with the “Programme
and consumption table”, select a
suitable programme for the amount
and soiling level of the laundry.
2. Select the desired programme with
the
Programme Selection
knob.
C
INFORMATION
• Programmes are limited to the highest spin
speed appropriate for that particular type of
fabric.
• When selecting a programme, always
consider the type of fabric, colour, soiling
level and permissible water temperature.
5.5 Washing programmes
Depending on the type of fabric, use the
following main programmes.
C
INFORMATION
• After selecting a washing programme suitable
for your laundry, you can press the Drying
button to set the machine to perform drying
after the washing programme. Each time you
press the button, info line shows at which
step the drying process will take place and
the relevant symbol will turn on. If you want,
you can keep pressing the button to perform
drying for the maximum period allowed.
• The symbols shown on the display are
schematic and may not match the product
exactly.
• When you will perform washing and
drying by using the Drying function of your
machine, load maximum 5 kg of laundry
into the machine. If you exceed the capacity
of the machine, your laundry will not dry
and the machine will work longer, which will
result in more energy consumption.
20 / EN Washer-Dryer / User Manual
• Algodón (Cottons)
You can wash your durable cotton laundry
(sheets, bedlinen, towels, bathrobes, underwear
etc.) in this programme. When you press the
quick wash function key, programme duration
becomes notably shorter but effective washing is
ensured thanks to intense washing movements.
If the quick wash function is not selected,
superior washing and rinsing performance is
ensured for your heavily soiled laundry.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Sintéticos (Synthetics)
You can use this programme to wash t-shirts,
synthetic/cotton mix fabrics etc. Programme
duration is notably shorter and efficient washing
performance is ensured. If the quick wash
function is not selected, superior washing and
rinsing performance is ensured for your heavily
soiled laundry.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Lana (Wollens / Hand Wash)
Use this programme to wash your woollen
clothes. Select the appropriate temperature
complying with the tag of your clothes. Your
laundry will be washed with very delicate
movements to avoid any damage.
C
INFORMATION
• The drying function cannot be selected
for the washing programme designed for
woollen laundry.
• Eco 40-60
The eco 40-60 programme is able to clean
normally soiled cotton laundry declared to be
washable at 40 °C or 60 °C, together in the same
cycle, and that this programme is used to assess
the compliance with the EU ecodesign legislation.
Although it washes longer than all other
programmes, it provides high energy and water
savings. Actual water temperature may be
different from the stated wash temperature. When
you load the machine with less laundry (e.g. ½
capacity or less), periods in programme stages
may automatically get shorter. In this case, energy
and water consumption will decrease.
Cupboard drying fuction should be selected with
eco 40-60 to perform wash and dry cycle to
assess the compliance with the EU ecodesign
legislation.
The wash and dry cycle is able to clean normally
soiled cotton laundry declared to be washable at
40 °C or 60 °C, together in the same cycle, and
to dry it in such a way that it can be immediately
stored in a cupboard.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
21 / EN Washer-Dryer / User Manual
• Rápido 28’/14’ (Xpress / Super Xpress)
Use this programme to wash your lightly soiled
cotton clothes in a short time. The programme
duration can be reduced down to 14 minutes
when the quick wash function is selected. When
the quick wash function is selected, maximum 2
(two) kg of laundry must be washed.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Camisas (Shirts)
Use this programme to wash shirts made of
cotton and synthetic blended fabrics together.
This programme ensures that your clothes
wrinkle less. When the quick wash function is
selected, the Pre-treatment algorithm is used.
• Apply the pre-treatment chemical
directly onto the clothes, or add it together with the
detergent to the powder detergent compartment
when the machine starts to take in water. This
way, it will take you much shorter to get the
performance you would normally get with a regular
washing cycle. Life of your shirts will be longer.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Down Wear
Use this programme to wash down coats, vests,
jackets etc. that bear a “machine-washable” tag.
Thanks to special spin profiles, it is ensured that
water reaches the air gaps between feathers.
•
Programa descargado
(
Downloaded Program)
This is a special programme that allows you to
download different programmes when you want
to. At the start, there is a programme you will
see with the HomeWhiz application as default.
However, you can use the HomeWhiz application
to select a programme from the predefined
programme settings, and then change it.
C
INFORMATION
• If you wish to use the HomeWhiz and
Remote Control functions, you need to
select Download Programme. Please see
the section HomeWhiz and Remote Control
Function for more details.
• Mix
You can use this programme to wash cottons and
synthetics together without the need to sort them.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Outdoor / Sports
Use this programme to wash outdoor/sports
clothes that contain cotton/synthetic mix, as
well as waterproof cloths like gore-tex. This
programme washes your laundry delicately
thanks to its special turning movements.
22 / EN Washer-Dryer / User Manual
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Dark Care /Jeans
Use this programme to preserve the colour
of your dark-coloured clothes and jeans. This
programme provides high efficiency in washing,
thanks to a special drum movement, even at low
temperatures. It is recommended to use liquid
detergent or woollen shampoo for dark coloured
laundry. Do not wash your delicate clothes that
contain wool etc. in this programme.
C
INFORMATION
• You can dry your laundry without any
interruption right after the washing programme
(it is possible to perform automatic or
scheduled drying after the washing cycle). For
this, you must also select the Drying function
before starting the washing programme.
• According to the drying selections you will
add to the washing programmes, you can
see when the programme will end on the
display of the machine.
• If you don't want drying to take place after
the programme you have selected, press
and hold the Drying auxiliary function button
until the Drying light turns off.
• Lingerie
You can use this programme to wash delicate
garments that are suitable for hand wash and
delicate women’s underwear. Small amount of
garments must be washed in a washing net.
Hooks, buttons etc. must be done up and zips
must be zipped up.
• Aclarado (Rinse)
Use when you want to rinse or starch separately.
• Spin+Drain
Use this programme to drain the water in the
machine.
5.6 Temperature selection
-
-
-
-
-
-
Whenever a new programme is selected, the
temperature recommended for that programme
appears on the temperature indicator. It is
possible that the recommended temperature is
not the highest value that can be selected for
the relevant programme.
Press the
Temperature Adjustment
key to
change the temperature.
C
INFORMATION
• Temperature Adjustment button works only
backwards. For example, if the display
shows 40°C but you want to select 60°C,
you will need to press the button for a few
times until you reach 60°C from 40°C.
C
INFORMATION
• If you scroll to Cold Wash option and press
the Temperature Adjustment button again,
the recommended maximum temperature for
the selected programme will appear on the
display. To decrease the temperature, press
the Temperature Adjustment button again.
Finally, the Cold light will turn on, indicating cold
wash.
You can also change the temperature after
the washing cycle has started. You can select
the desired temperature after the washing
programme has started. However, you need to
do this before the heating step starts.
23 / EN Washer-Dryer / User Manual
5.7 Spin speed selection
-
-
-
-
-
-
Whenever a new programme is selected, the
spin speed recommended for the selected
programme appears on the
Spin Speed
indicator.
C
INFORMATION
• It is possible that the recommended spin
speed is not the highest value that can be
selected for the relevant programme.
Press the
Spin Speed Adjustment
button to
change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on
the display.
C
INFORMATION
• Spin Speed Adjustment button works only
backwards. For example, if the display
shows 800 rpm but you want to select
1000 rpm, you will need to press the button
for a few times until you reach 1000 rpm
from 800 rpm.
5.7.1 If you want to spin your laundry
after the Rinse Hold function:
- Adjust the
Spin Speed
.
- Press the
Start/Pause
button. Programme will
resume. The machine will drain the water and
spin the clothes.
If you want to drain the water at the end of the
programme without spinning, you can use the
No Spin
function.
C
INFORMATION
• If you press the Spin Speed adjustment
button in programmes where the spin
speed is not allowed, the spin speed setting
will not change and you will hear a warning.
You can also change the spin speed after the
washing cycle has started. After the washing
cycle has ended, you can press the spin speed
adjustment button to select a spin speed.
However, you need to do this before the
spinning step begins.
5.7.2 Auxiliary function
selection for drying
-
-
-
-
When you select a new washing programme,
press the Auxiliary Function Selection button
to set the drying option suitable for this
programme.
C
INFORMATION
• If you press the Drying auxiliary function
button in programmes where the drying
step is not allowed, the drying light will not
change and you will hear a warning.
C
INFORMATION
• Only for dying programmes, press the
Auxiliary Function Selection button to set
the suitable drying option.
24 / EN Washer-Dryer / User Manual
5.8 Drying programmes
A
CAUTION!
• During the drying programme, the machine
automatically removes the lints coming from
the clothes. The machine uses water in
the drying step. For this reason, water tap
of the machine should be open also in the
drying programmes.
• When you select a new washing
programme, press the Auxiliary Function
Selection button to set the drying option
suitable for this programme.
C
INFORMATION
• There is a spinning step in the drying
programmes. Your machine performs this
process in order to shorten the drying time.
While the drying programme is selected, the
spin speed setting is within the Maximum
spin speed range.
• If you press the Drying auxiliary function
button in programmes where the drying
step is not allowed, the drying light will not
change and you will hear a warning.
• Only for dying programmes, press the
Auxiliary Function Selection button to set
the suitable drying option.
• In case of water outage, washing or drying
cannot be performed.
• Secado Sintético (Synthetic Dry)
Use this programme to dry synthetic clothes
with dry weight up to 3 kg. You can perform only
drying in this programme.
C
INFORMATION
• For dry wright of laundry, see Section 4,
Step 4.5.
• Secado Algodón (Cotton Dry)
Use this programme to dry cotton clothes with
dry weight up to 5 kg. You can perform only
drying in this programme.
C
INFORMATION
• If you are going to dry laundry that
comprises only towels and bathrobes, the
maximum amount of laundry that can be
loaded is 4 kg.
• For dry wright of laundry, see Section 4,
Step 4.5.
5.9 Washing and drying
programmes
A
CAUTION!
• During the drying programme, the machine
automatically removes the lints coming from
the clothes. The machine uses water in
the drying step. For this reason, water tap
of the machine should be open also in the
drying programmes.
•
5 Kg Lavar&Secar (5 Kg Wash & Dry)
Use this programme to wash cotton laundry of
up to 5 kg and to dry right after the washing
programme without making any other selection.
C
INFORMATION
• When this programme is selected, the external
Drying auxiliary function cannot be selected.
In the 5 kg Washing and 5 kg Drying programme, it
is recommended to load the machine up to the level
shown above for ideal drying conditions (you can
see the level arrow if you open the loading door).
25 / EN Washer-Dryer / User Manual
• Wash & Wear
Use this programme to wash 0.5 kg of laundry
(2 shirts) in 40 minutes or 1 kg of laundry (5
shirts) in 60 minutes.
C
INFORMATION
• The Wash&Wear programme is designed to
quickly wash and dry daily clothes that have
been worn for a short time and are not heavily
soiled. This programme is suitable for thin-
textured clothes that dry quickly (shirts, t-shirts).
• Other drying options or programmes should
be used for thick texture laundry that takes
long to dry.
• Hygiene+ Lavar&Secar
(Hygiene+ Wash & Dry)
Applying a steam step at the beginning of the
programme allows to soften the dirt easily.
Use this programme to wash and quickly dry
laundry (up to 2 kg) that requires anti-allergic
and hygienic washing (cottons such as baby
clothes, sheets and underwear).
C
INFORMATION
• The Hygiene programme has been tested and
approved by the “British Allergy Foundation”
(Allergy UK) based in the United Kingdom.
•
HygieneTherapy
Hygienic washing with warm air
(program period 58 min.)
With the hygiene air refresh program, hygienic
cleaning with air is ensured by keeping the
temperature of the laundry at relatively high
temperatures for a certain period of time with a
sensitive heating method.
Use this program to quickly clean your dry
clothes made of cotton or synthetic materials
hygienically with warm air.
C
INFORMATION
• Hygiene air refresh program is not a
program where laundry is washed with
water. Use this program for your laundry
that you want to clean by refreshing with air.
• In the hygiene air refresh program, do not
add chemicals such as detergent, bleach,
stain remover, etc. to the detergent drawer,
or do not apply pre-treatment to the laundry
before starting the program.
Refreshing with warm air (48 min. and 38 min.)
When you select the “Hygiene Air Refresh”
program, the default period shall be 58 minutes.
With the “Fast+” auxiliary function, you may
select different program periods such as 48
minutes or 38 minutes.
26 / EN Washer-Dryer / User Manual
5.10 Programme and consumption table (for washing)
• : Selectable.
* : Automatically selected, cannot be cancelled.
***: Eco 40-60 with 40 °C temperature selection is the washing performance test program in accordance with
EN 62512 and energy label test program in accordance with Commission Delegated Regulation (EU) 2019/2014
Eco 40-60 with 40 °C temperature and cup board dry selection is the wash and dry cycle test program in accordance
with EN 62512 and energy label test program in accordance with Commission Delegated Regulation (EU) 2019/2014
*****: These programmes can be used with the HomeWhiz application. Energy consumption may increase
with connection.
- : See the programme description for maximum load.
EN 1Auxiliary functions
Programme (°C)
Max. Load (kg)
Water Consumption (l)
Energy Consumption
(kWh)
Max. Speed
Fast+
Prewash
Steam
Anti-Crease+
Drying
Selectable temperature
range °C
Algodón
90 890 2,50 1400 • • • • •
Cold - 90
60 890 1,80 1400 • • • • •
Cold - 90
40 888 0,97 1400 • • • • •
Cold - 90
Eco 40-60
40 *** 854 0,955 1400 •
40 - 60
40 *** 435 0,550 1400 •
40 - 60
40 *** 228 0,320 1400 •
40 - 60
Eco 40-60 + Cupboard Dry
40 *** 561 3,215 1400 •
40 - 60
40 *** 2,5 42 1,780 1400 •
40 - 60
Sintéticos
60 360 1,35 1200 • • • • •
Cold - 60
40 358 0,85 1200 • • • • •
Cold - 60
Rápido 28’/14’
90 868 2,20 1400 • • • •
Cold - 90
60 868 1,20 1400 • • • •
Cold - 90
30 868 0,20 1400 • • • •
Cold - 90
Rápido 28’/14’ + Fast+
30 240 0,15 1400 • • • •
Cold - 90
Lana
40 1,5 55 0,50 1200
Cold - 40
Camisas
60 363 1,23 800 • • • • •
Cold - 60
Drum Clean+
90 -76 2,6 600 * *
90
Programa descargado (Downloaded Program) *****
Mix
40 3,5 70 0,9 800 • • • • •
Cold - 40
Outdoor / Sports
40 3,5 52 0,65 1200
•
•
Cold - 40
Dark Care / Jeans
40 3,5 70 0,85 1200 • • • • •
Cold - 40
Downwear
60 275 1,3 800 •
Cold - 60
Lingerie
30 165 0,56 600
Cold - 30
27 / EN Washer-Dryer / User Manual
C
INFORMATION
• The auxiliary functions in the table may vary according to the model of your machine.
• Water and power consumption may vary subject to the changes in water pressure, water
hardness and water temperature, ambient temperature, type and amount of laundry, selection of
auxiliary functions and spin speed, and changes in the mains voltage.
• When selecting a programme, you can see the washing duration on the display of your machine.
Depending on the amount of laundry you have loaded into the machine, there might be a
difference of 1 to 1.5 hours between the duration shown on the display and the actual duration
of the washing programme. The duration will be corrected automatically right after the washing
programme has started.
• "Auxiliary function selection modes can be changed by the manufacturing company. New
selection models may be added, or the existing ones may be removed.”
• "Spin speed of your machine may vary depending on the programme; the spin speed cannot
exceed the maximum spin speed of your machine."
• Always select the lowest appropriate temperature. The most efficient programmes in terms of
energy consumption are generally those that perform at lower temperatures and longer duration.
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
Programme and consumption table (for drying)
EN 1Auxiliary functions Drying level
Programme (°C)
Max. Load (kg)
Water Consumption (l)
Energy Consumption (kWh)
Max. Speed
Fast+
Prewash
Steam
Anti-Crease+
Drying
Extra Dry
Cupboard Dry
Iron Dry
Time based drying - minutes
Selectable
temperature
range °C
Secado Algodón
- 5 45 3,20
1400
• * • • • •
-
Secado Sintético
- 3 30 2,10 - • * • • •
-
Hygiene+ Lavar&Secar
60 2120 3,80 1400 * • * • • • •
90-30
5 Kg Lavar&Secar
60 594 5,00 1400 • * • • • •
60-Cold
Wash&Wear
30 0,5 35 0,60 1200 • * •
30-Cold
Wash&Wear
30 144 1,00 1200 • * •
30-Cold
HygieneTherapy - 2 1 0,50 - • • *
-
28 / EN Washer-Dryer / User Manual
5.11 Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. When a programme is selected,
lights of the auxiliary functions that can be selected
together with that programme will turn on.
-
-
-
-
C
INFORMATION
• Lights of the auxiliary functions that cannot
be selected together with the selected
programme will not turn on. If you press the
buttons of these auxiliary functions, you will
hear a warning and selection will be disabled.
If the washing programme has reached a point
where an auxiliary function cannot be selected,
you cannot select any function.
C
INFORMATION
• Some functions cannot be selected together.
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible
with the programme cannot be selected.
(See "Programme and consumption table")
• Some programmes have auxiliary functions
that must run together with the selected
programme. These functions cannot be
cancelled. The light of the relevant auxiliary
function is already on.
Consumption Values (EN)
Temperature
Selection (°C)
Spin Speed (rpm)
Capacity (kg)
Programme
Duration (hh:mm)
Energy
Consumption (kWh/
cycle)
Water Consumption
(L/cycle)
Laundry
Temperature (°C)
Remaining Moisture
Content (%)
Eco 40-60
40 1400 8 03:38 0,955 54,0 40 53
40 1400 4 02:47 0,550 35,0 32 53
40 1400 2 02:47 0,320 28,0 23 53
Algodón 20 1400 8 03:40 0,600 93,0 20 53
Algodón 60 1400 8 03:40 1,800 90,0 60 53
Sintéticos 40 1200 3 02:25 0,850 58,0 40 40
Rápido 28’/14’ 30 1400 8 00:28 0,200 68,0 23 62
Eco 40-60+Cupboard Dry 40 1400 5 07:55 3,215 61,0 25 53
40 1400 2,5 05:50 1,780 42,0 24 53
29 / EN Washer-Dryer / User Manual
C
INFORMATION
• If the selected wetness level (Iron Dry,
Cupboard Dry, Cupboard Extra Dry)
cannot be reached at the end of the drying
programme, your machine will automatically
extent the programme duration. The
programme will take longer.
• If Timed Drying is selected, the programme
will end at the end of the drying time even if
the laundry is not dry.
• If, during the drying programme, the selected
wetness level (Iron Dry, Cupboard Dry,
Cupboard Extra Dry) is reached or extra
dryness is detected in the timed drying
options, the programme will take shorter. The
time decrease will be shown on the display.
5.11.1 Auxiliary Functions
• Prewash
A Prewash is required only for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
• Fast+
You can press the Quick Wash button to
shorten the programme time after selecting the
programme. For some programmes, the time
can be shortened by over 50%. Still, for medium
and lightly soiled laundry, you will get the same
washing results in a shorter time.
Although it depends on the programme,
pressing the Quick Wash button once will
shorten the programme time down to a certain
level. Press the same button for the second time
to drop the time to the minimum level.
For better washing results, do not use the Quick
Wash button for heavily soiled laundry.
For medium and lightly soiled laundry, use the Quick
Wash button to shorten the programme time.
• Remote Control
You can use this auxiliary function button to
connect your product to smart devices. For
detailed information, see HomeWhiz and the
Remote Control Function.
• Custom Programme
This auxiliary function can be used for Cottons and
Synthetics programmes only with the HomeWhiz
application. When this auxiliary function is enabled,
you can add up to 4 additional rinse steps to the
programme. You can select and use some auxiliary
functions even though they are not found on your
product. You can increase and decrease the time
of the Cottons and Synthetics programmes within
a safe range.
• Drying
This function dries your laundry after the
washing cycle. Please see the programme table
for programmes that can be used with this
function.
5.11.2 Functions/Programmes
Selected by Pressing the
Function Buttons for 3 Seconds
• Drum Clean+
To select this programme, press and hold the
auxiliary function button 1 for 3 seconds. Use
regularly (once in every 1-2 months) to clean the
drum and provide the required hygiene. Before
the programme, it applies steam to soften
residues in the drum. Operate the programme
while the machine is completely empty. To obtain
better results, put powder lime-scale remover
for washing machines into the detergent
compartment no. “2”. This programme contains
a drying step that runs after the drum cleaning
step to dry the inside of the machine.
C
INFORMATION
• This is not a washing programme. It is a
maintenance programme.
• Do not run this programme when there are
any objects in the machine. If you try to do
so, the machine will automatically detect
that there is load inside and abort the
programme.
30 / EN Washer-Dryer / User Manual
• Anti-Crease+
If you press and hold the spin selection button
for 3 seconds, this function will be selected and
the programme follow-up light of the relevant
programme will turn on. When this function is
selected, it aerates the laundry for up to 8 hours
at the end of the programme to prevent creasing.
You can cancel the programme and take your
laundry out at any time during the 8-hour
duration. Press the function selection key or the
machine on/off key to cancel the function. The
programme follow-up light will remain on until the
function is cancelled or the step is complete. If
the function cannot be cancelled, it will be active
in the subsequent washing cycles as well.
• Steam
You can press and hold the auxiliary function key
2 for 3 seconds to select this function.
Use this programme to reduce the wrinkles and
shorten the ironing times for a small amount of
cotton, synthetic or mixed clothes that are not
stained.
• Child lock
You can use the Child Lock to prevent children
from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
INFORMATION
• When the Child Lock is enabled, you can
press the On/Off key to switch the machine
on or off. Programme resumes when you
start the machine again.
• You will hear a warning if the buttons are
pressed while Child Lock is enabled. This
audible warning will be cancelled if the
buttons are pressed five times consecutively.
To enable Child Lock:
Press and hold the Drying Level
Adjustment button
for 3 seconds. When the
countdown
“3-2-1”
on the display ends, child
lock icon will be displayed. Once you see this
warning, you can release the
Drying Level
Adjustment button
.
To disable Child Lock:
Press and hold the Drying Level
Adjustment button
for 3 seconds. When the
countdown
“3-2-1”
on the display ends, child
lock icon will disappear.
• Bluetooth
You can use the Bluetooth connection function
to pair your machine with your smart device.
This way, you can use your smart device to get
information about your machine and control it.
To enable Bluetooth:
Press and hold the Remote Control
function button
for 3 seconds. You will see
the countdown
“3-2-1”
, and bluetooth symbol
will be displayed. Release the
Remote Control
function button
. The Bluetooth icon will flash
while the product is being paired with the smart
device. If the connection is successful, the light
of the icon will remain on.
To disable Bluetooth:
Press and hold the Remote Control
function button
for 3 seconds. You will see
the countdown
“3-2-1”
, and bluetooth symbol
will be disappear.
C
INFORMATION
• You must complete the first setup of the
HomeWhiz app for Bluetooth to be enabled.
After the setup, if you press the Remote
Control function button while the button
is in the Programme Download/Remote
Control position, the Bluetooth connection
will be enabled automatically.
5.12 Drying steps
-
-
-
-
5.12.1 Iron Dry
Drying continues until the drying level reaches
the Iron Dry step.
5.12.2 Cupboard Dry
Drying continues until the drying level reaches
the Cupboard Dry step.
31 / EN Washer-Dryer / User Manual
5.12.3 Extra Dry
Drying continues until the drying level reaches
the Cupboard Extra Dry step.
C
INFORMATION
• The dryness level might change depending
on the mix of laundry, type of material,
amount and wetness level of the laundry.
• Do not use the machine to dry laundry that
contains lace, tulle, bling, beads, paillette,
wire etc. or laundry with high silk content.
5.12.4 Time based
drying - minutes
You can select 30, 90 or 150 minutes drying
to reach the desired dryness level at a low
temperature.
C
INFORMATION
• When drying small amount of laundry (2
pieces maximum), select the timed drying
steps in the Cottons or Synthetics drying
programmes.
• If the laundry has not reached the desired
dryness level at the end of the drying
programme, you can select timed drying to
end the process.
• When this function is selected, the machine
performs drying for the adjusted time
irrespective of the drying level.
5.13 Time display
While the programme is running, the time
remaining to the end of the programme will be
displayed in hours and minutes, e.g. “01:30”.
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and the
changes in the mains voltage.
5.14 End Time
-
With the
End Time
function, start of the
programme can be delayed up to 24 hours.
After pressing the
End Time
button, the
programme's estimated end time will be
displayed. If an
End Time
is set, the
End Time
light will turn on.
To ensure that the End Time function is enabled
and the programme ends at the end of the
defined duration, you should press
Start /
Pause
after setting the duration. The
Start/
Pause
button will stop flashing and remain on.
If you want to cancel End Time function, press
the
End Time
button until the End Time light
turns off or press the
On/Off
button to turn off
and on the machine.
1. Open the loading door, place the
laundry and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Press the
End Time
button to set the desired
end time. The
End Time
light will turn on.
4. Press the
Start / Pause
button. Countdown
will start. ":" sign in the middle of the end
time on the display will start flashing.
C
INFORMATION
• Do not use liquid detergents when you
enable the End Time function! Stains might
remain on the clothes.
• The door will remain locked during the End
Time countdown. If you want to unlock
the door, press the programme start/
pause button to switch the machine to
pause mode. At the end of the countdown,
End Time indicator turns off, washing
cycle starts and the time of the selected
programme appears on the display.
• When End Time is selected, the time
displayed on the screen consists of the
end time plus the duration of the selected
programme.
32 / EN Washer-Dryer / User Manual
5.15 Starting the programme
1. Press the
Start/Pause
button
to start the programme.
2. The flashing light of the
Start/Pause
button will remain on, indicating that
the programme has started.
3. Loading door will be locked. When
the door is being locked, “Locking
Door” warning will be displayed.
5.16 Loading door lock
There is a locking system on the loading door
of the machine that prevents opening of the
loading door when the water level is unsuitable
to open the door.
"Loading door locked" light on the panel turns
on when the loading door is locked.
C
INFORMATION
• The door will be locked if the Remote
Control function is selected. To open the
door, you need to press the Remote Control
key or change the programme position to
deactivate the Remote Control function.
Opening the loading door in case of power
failure:
C
INFORMATION
• In case of a power failure, you can use the
loading door emergency handle under the
pump filter lid to manually open the loading
door.
A
WARNING!
• Before opening the loading door, make sure
that there is no water in the machine to
avoid flooding. Water may be hot and could
cause scalding.
•
Turn off and unplug the appliance.
•
Open the pump filter lid.
•
Remove the loading door emergency
handle behind the filter cover with a tool.
•
Open the loading door by pulling the loading
door emergency handle downwards.
•
Try to pull the handle downwards again
if the loading door is not opened.
•
Bring the loading door emergency
handle to its original position after
opening the loading door.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started :
When you press the
Start/Pause
button, the
“Loading door locked” light on the panel will go
off if the water level in the machine is suitable.
33 / EN Washer-Dryer / User Manual
If the water level in the machine is not suitable
when you press the
Start/Pause
button, the
panel will warn you that the door is closed.
5.17.2 Switching the
machine to pause mode
Press the
Start/Pause
button to switch the
machine to pause mode.
5.17.3 Changing the
programme selection after
the programme has started:
If Child Lock is not enabled, you can change
programme while the current one is running.
This will cancel the current programme.
C
INFORMATION
• The newly selected programme will start anew.
5.17.4 Changing the auxiliary
function, spin speed and
temperature settings
Depending on the step the programme has
reached, you can cancel or select auxiliary
functions. See “Auxiliary function selection”.
Also, you can change the spin speed,
temperature and drying settings. See "Spin
speed selection" and "Temperature selection".
C
INFORMATION
• If the temperature of the water inside the
machine is high or if the water level is above
the door line, the loading door will not open.
5.18 Cancelling the programme
The programme will be cancelled if the
programme selection knob is switched to
another programme or if the machine is
switched off and on with this button.
C
INFORMATION
• The programme will not be cancelled if you
turn the programme selection knob while
child lock is enabled. You should cancel the
Child Lock first.
• If you want to open the loading door after
you have cancelled the programme but
you cannot do it since the water level in the
machine is above the loading door baseline,
turn the Programme Selection knob to
Pump+Spin programme and discharge the
water in the machine.
5.19 End of programme
Once the programme is completed, the End
symbol will be displayed.
If you do not press any button for 10 minutes,
the machine will switch to OFF mode. Display
and all indicators are turned off.
If you press any button, the completed
programme steps will be displayed.
5.20 Your machine has the
"Pause Mode" function.
After using the On/Off button to switch on the
machine, if you do not start any programme in
the selection step or do not perform anything
else, or if you do not do anything in 2 minutes
after the selected programme has ended, the
programme will automatically switch to energy
saving mode. Also, if your product has a display
that shows programme time, this display will be
completely turned off. If you turn the programme
knob or touch any button, the lights will switch
back to previous position. The selections you
make when exiting the energy efficiency mode
may change. Check if your selections are correct
before starting the programme. If necessary,
make adjustments again. This is not an error.
34 / EN Washer-Dryer / User Manual
5.21 HomeWhiz and the
Remote Control Function
HomeWhiz allows you to use your smart device
to control your washing machine and get
information about it. Thanks to the HomeWhiz
application, you can use your smart device to
carry out some procedures you can also do on
the machine. Plus, you can use some features
only with the HomeWhiz function.
To use the Bluetooth function of your machine,
you should download the HomeWhiz app from
the application store of your device.
Make sure that your smart device is connected
to internet to download the app.
If you are using the app for the first time, please
follow the on-screen instructions to complete the
user registration process. Once the registration
is complete, you can use all products with the
HomeWhiz feature in your house on this account.
On the HomeWhiz app, you can tap “Add/
Remove Appliance” to see the products paired
with your account. You can pair these products
on this page.
C
INFORMATION
• To be able to use the HomeWhiz function,
make sure that the app is installed on your
smart device and that your washing machine
is paired with your smart device via Bluetooth.
If the washing machine is not paired with your
smart device, it will function as an appliance
without the HomeWhiz feature.
• Your product will run once it is paired with
your smart device via Bluetooth. Controls
made from the app will be enabled through
this pairing. For this reason, the Bluetooth
signal between the product and the smart
device must be strong enough.
• Please visit www.homewhiz.com to see the
Android and iOS versions supported by the
HomeWhiz application.
A
WARNING!
• All the safety measures described in
"GENERAL SAFETY INSTRUCTIONS"
section of your user manual apply to remote
control through the HomeWhiz function as
well.
5.21.1 HomeWhiz Setup
Your product and the HomeWhiz app must
be connected for the app to run. To establish
this connection, please follow the steps below
for setup both on your product and on the
HomeWhiz App.
• If you are adding an appliance for the first
time, tap “Add/Remove Appliance” on the
HomeWhiz App. Then tap “Tap here to
setup new appliance”. Follow the steps
below as well as the instructions on the
HomeWhiz App to complete the setup.
• To start the setup process, make sure that your
machine is switched off. Press and hold the
Temperature button and the Remote Control
Function button simultaneously for 3 seconds to
switch your machine to HomeWhiz setup mode.
• While the device is in HomeWhiz setup mode,
you will see an animation on the display,
and the Bluetooth icon will flash until the
machine is paired with your smart device.
In this mode, only the programme button
is enabled. Other buttons are disabled.
• On the screen of the app, select the
desired washing machine and tap Next.
• Follow on-screen instructions until the
HomeWhiz app asks you about the product
you wish to connect to your smart device.
• Return to the HomeWhiz app and wait until
the setup is complete. Once the setup is
complete, give your washing machine a name.
You can now tap the screen to see the product
you have added to the HomeWhiz App.
35 / EN Washer-Dryer / User Manual
C
INFORMATION
• If you cannot complete the setup
successfully in 5 minutes, the washing
machine will switch off automatically. In this
case, you will have to start over the setup
procedure. If the problem persists, please
contact the Authorised Service Agent.
• You can use your washing machine with
more than one smart device. To do this,
download the HomeWhiz app on the other
smart device as well. After launching the
app, you will need to sign in to your account
you have previously created and paired with
your washing machine. Otherwise, please
read “Setting up a washing machine that is
connected to someone else’s account”.
A
WARNING!
• For HomeWhiz setup, your smart device must
be connected to internet. Otherwise, the
HomeWhiz App will not let you complete the
setup process successfully. If you are having
problems with your internet connection,
please contact your internet service provider.
C
INFORMATION
• The HomeWhiz application may ask you
to enter the product number stated on
the label of the product. Product label is
found on the inner side of the product door.
Product number is written on this label.
5.21.2 Setting up a washing
machine that is connected to
someone else’s account
If the washing machine you want to use has
previously been registered in the system with
someone else’s account, you need to establish
a new connection between the HomeWhiz App
and the product.
• Download the HomeWhiz App on the
new smart device you want to use.
• Create a new account and log in to this
account on the HomeWhiz app.
• Follow the steps in the HomeWhiz
Setup (5.21.1 HomeWhiz Setup)
to complete the setup.
A
WARNING!
• Since the HomeWhiz and Remote Control
functions of your product work through
pairing via Bluetooth, the product can be
run by only one HomeWhiz app at a time.
5.21.3 Using the Remote
Control function
After HomeWhiz setup, Bluetooth will turn on
automatically. To enable or disable the Bluetooth
connection, please see 5.11.2 Bluetooth 3”.
If you switch your machine off and on
while Bluetooth is enabled, it will reconnect
automatically. If the paired device goes out of
the range, the Bluetooth connection will turn off
automatically. For this reason, you will need to
turn on Bluetooth again if you want to use the
Remote Control function.
You can check the Bluetooth symbol on the
display to follow the connection status. If the
symbol is on, this means that the Bluetooth
connection is established. If the symbol is
established, the product is trying to connect. If
the symbol is off, this means that you have no
connection.
A
WARNING!
• If the Bluetooth connection is enabled on your
product, you can select the Remote Control
function. If the Remote Control function
cannot be selected, check the connection
status. If the connection fails, repeat the initial
set-up settings on the appliance.
• For safety reasons, the product’s door will
remain locked while the Remote Control
function is enabled, independently of the
operating mode. If you want to open the
door of the product, you will need to turn
the programme selection knob or press the
Remote Control key to disable the Remote
Control function.
If you want to control your washing machine
remotely, enable the Remote Control function
by pressing the Remote Control button while
the programme knob is in the Programme
Download/Remote Control position on the
control panel. Once the product is accessed,
you will see a screen similar to the one below.
36 / EN Washer-Dryer / User Manual
When Remote Control is enabled, you can only
manage and switch off the machine and follow
status on the washing machine. All functions
except child lock can be managed through the
application.
You can check the function indicator on the key
to follow whether the Remote Control function is
On or Off.
If the Remote Control function is Off, all the
operations are handled on the washing machine
and only status follow-up is allowed on the
application.
If the Remote Control function cannot be
enabled, you will hear a warning after pressing
the button. This might occur if the product is
switched on or if there is no product paired
through Bluetooth. Bluetooth setting being Off
or the washing machine's door being open are
examples for such cases.
When you enable this function on the washing
machine, said function will remain on except
for certain cases, allowing you to control your
washing machine remotely via Bluetooth.
In certain cases, it deactivates itself for
safety reasons:
• When your washing machine
undergoes a power interruption.
• When the programme knob is turned
to select a different programme or
when the product is switched off.
5.21.4 Troubleshooting
Follow the steps below if you are having problem
with controlling or connection. Observe whether
the problem persists or not after the action you
have performed. Do the following if the problem
is not resolved.
• Check whether your smart device is
connected to the relevant home network.
• Restart the product application.
• Turn Bluetooth off and on through
the user control panel.
• If the connection cannot be established
with the above processes, repeat the initial
set-up settings on the washing machine.
If the problem persists, consult an
Authorised Service Agent.
6 Maintenance and cleaning
Service life of product extends and frequently
experienced problems will be reduced if it is
cleaned at regular intervals.
6.1 Cleaning the detergent drawer
Clean the detergent
drawer at regular
intervals (every 4-5
washing cycles)
as shown below
in order to prevent
accumulation of
powder detergent in
time.
1 Remove the siphon by lifting it from behind
as shown in the picture. After performing
the below mentioned cleaning procedures,
replace the siphon back to its seating
and push its front section downwards to
make sure that the locking tab engages.
C
INFORMATION
• If more than normal amount of water and
softener mixture remains in the softener
compartment, the siphon must be cleaned.
2. Wash the detergent drawer and the siphon
with plenty of lukewarm water in a washbasin.
In order to prevent the residues to contact
your skin, clean it with an appropriate
brush by wearing a pair of gloves.
3 Insert the drawer back into its place after
cleaning and make sure that it is seated well.
6.2 Cleaning the loading
door and the drum
For products with drum cleaning programme,
please see Operating the product - Programmes.
C
INFORMATION
• Repeat Drum Cleaning process in every 2
months.
• Use an detergent /anti-limescale suitable
for the washing machines.
37 / EN Washer-Dryer / User Manual
After every washing and
drying make sure that
no foreign substance is
left in the drum.
If the holes on the
bellow shown in the
figure are blocked,
open the holes using a
toothpick.
C
INFORMATION
• Foreign metal substances will cause rust
stains in the drum. Clean the stains on the
drum surface by using cleaning agents for
stainless steel. Never use steel wool or wire
wool.
A
CAUTION!
• Never use sponge or scrub materials.
These will damage the painted, chrome
and plastic surfaces.
6.3 Cleaning the body
and control panel
Wipe the body of the machine with soapy
water or non-corrosive mild gel detergents as
necessary, and dry with a soft cloth.
Use only a soft and damp cloth to clean the
control panel.
6.4 Cleaning the water
intake filters
There is a filter at the end of each water intake
valve at the rear of the machine and also at
the end of each water intake hose where they
are connected to the tap. These filters prevent
foreign substances and dirt in the water to enter
the washing machine. Filters should be cleaned
if they are dirty.
1. Close the taps.
2. Remove the nuts of the water intake
hoses to access the filters on the water
intake valves. Clean residues on them
with an appropriate brush. If the filters are
too dirty, remove them from their places
with a pliers and clean in this way.
3. Take out the filters on the flat ends of the
water intake hoses together with the gaskets
and clean thoroughly under running water.
4. Replace the gaskets and filters carefully
in their places and tighten the hose nuts
by hand ensuring there are no leaks.
6.5 Draining remaining water
and cleaning the pump filter
The filter system in your machine prevents solid
items such as buttons, coins and fabric fibres
clogging the pump impeller during discharge of
washing water. Thus, the water will be drained
without any problem and the service life of the
pump will extend.
If the machine fails to drain water, the pump filter
is clogged. Filter must be cleaned whenever it
is clogged or in every 3 months. Water must be
drained off first to clean the pump filter.
In addition, prior to transporting the machine
(e.g., when moving to another house) and in
case of freezing of the water, water may have to
be drained completely.
A
CAUTION!
• Foreign substances left in the pump filter
may damage your product or may cause
noise problem.
• If the product is not being used, shut the
tap, remove mains hose and drain the
water inside the machine in places where
there is the risk of the product freezing .
• After each use, turn off the water tap to
which the mains hose is connected.
1. In order to clean the dirty filter and
discharge the water, unplug the
machine to cut off the supply power.
A
CAUTION!
• Temperature of the water inside the
machine may rise up to 90 ºC. To avoid
the risk of burning, clean the filter after the
water inside the machine is cooled down.
38 / EN Washer-Dryer / User Manual
2. Open the filter cover. Press the tab
in the direction of the arrow and pull
the cover out towards yourself.
3.To drain the water in the machine.
a. In order to collect the water to flow
out of the filter, place a large shallow
vessel in front of the filter.
b. Turn and loosen the pump filter until
water starts to flow (counterclockwise).
Fill the flowing water into the container
you have placed in front of the filter.
Always keep a piece of cloth handy
to absorb any spilled water.
c When the water inside the machine is finished,
take out the filter completely by turning it.
4. Clean any residues inside the filter as well
as fibres, if any, around the pump impeller
region.
5. Replace the filter.
6. Close the filter cover.
7 Troubleshooting
Programmes won’t start after the loading door has
been closed.
• You did not press the Start/Pause/Cancel button.>>>
*Press the
Start/Pause/Cancel button.
• If the load is too much, it might be hard for the loading door to be
closed.>>>
*Load less laundry and make sure that the loading
door is closed properly.
Programme cannot be started or selected.
• The machine may have switched itself to self-protection mode
due to a supply problem (mains voltage, water pressure etc.).
>>>
To cancel the programme, turn the Programme Selection
knob to select another programme. Previous programme will
be cancelled. (see. “Cancellation of programme”)
Water inside the machine.
• There might be some water remaining in the product due to the
quality control processes carried out during production. >>>
This is not a failure, water does not harm the machine.
Water is leaking from the bottom of the machine.
• There might be a problem with the hoses or the pump filter.
>>>
Make sure that the seals of the water inlet hoses are
securely fitted. Attach the hose to the tap tightly.
• Pump filter might not be closed securely. >>>
Make sure that
the pump filter is closed securely.
Machine does not take in water.
• Tap might be turned off. >>>
Turn on the taps.
• Water inlet hose might be bent. >>>
Flatten the hose.
• Water inlet filter might be clogged. >>>
Clean the filter.
• Loading door might not be closed. >>>
Close the loading door.
Machine does not drain water.
• Water drain hose might be clogged or twisted. >>>
Clean or
flatten the hose.
• Pump filter might be clogged. >>>
Clean the pump filter.
Machine vibrates or makes noise.
• Machine might be unbalanced. >>>
Adjust the feet to level the
machine.
• A hard substance might have entered the pump filter. >>>
Clean the pump filter.
• Transportation safety bolts might not be removed. >>>
Remove the transportation safety bolts.
• The amount of laundry might be too little. >>>
Add more
laundry to the machine.
• The machine might be overloaded with laundry. >>>
Take out
some of the laundry from the machine or distribute the load by
hand to balance it evenly in the machine.
• The machine might be in contact with a hard surface. >>>
Make sure that the machine is not in contact with anything.
Machine stopped shortly after the programme started.
• The machine might have stopped temporarily due to low
voltage. >>>
It will resume running once the voltage returns to
a normal level.
39 / EN Washer-Dryer / User Manual
Programme time does not countdown. (*)
• The laundry in the machine might be unbalanced. >>>
The
automatic unbalanced load detection system might have been
activated due to uneven distribution of the laundry in the drum.
Machine does not switch to spinning step. (*)
• The laundry in the machine might be unbalanced. >>>
The
automatic unbalanced load detection system might have been
activated due to uneven distribution of the laundry in the drum.
• The machine cannot spin if the water in it is not drained
completely. >>>
Check the filter and the drain hose.
• Excessive foam might have formed due to use of too much
detergent, and the automatic foam absorption system might
have been activated. >>>
Use the recommended amount of
detergent.
Washing performance is poor: Clothes are going grey.(**)
• Insufficient amount of detergent might have been used over
a long period of time. >>>
Use the recommended amount of
detergent according to water hardness and the laundry.
• Washing might have been performed at low temperatures for a
long time. >>>
Select the proper temperature for the laundry
to be washed.
• Hard water and insufficient amount of detergent. >>>
Using
hard water together with insufficient amount of detergent
might cause dirt accumulation and greying on laundry in
time. It is difficult to eliminate greying once it happens. Use
the recommended amount of detergent appropriate for water
hardness and the laundry.
• Excessive amount of detergent might have been used. >>>
Use the recommended amount of detergent appropriate for
water hardness and the laundry.
Washing performance is poor: Stains persist or the
laundry is not whitened. (**)
• Insufficient amount of detergent might have been used. >>> Use
recommended amount of detergent appropriate for the laundry.
• Machine might have been overloaded. >>>
Do not overload the
machine. Load the machine with the amounts recommended in
the "Programme and consumption table".
• Wrong programme and temperature might have been selected.
>>>
Select the right programme and temperature for the
laundry to be washed.
• Wrong type of detergent might have been used. >>>
Use
original detergent appropriate for the machine.
• Detergent might have been put in the wrong compartment.
>>> Put the detergent in the correct compartment. Do not mix
the bleaching agent and the detergent with each other.
Washing performance is poor: Oily stains appeared
on the laundry. (**)
• The drum might not have been cleaned regularly. >>>
Clean
the drum regularly. To do this, please see. 6.2.
Washing performance is poor: Clothes smell bad. (**)
• Washing at low temperatures and/or with short programmes
for a long time will cause smell and bacteria in the drum. >>>
Leave the detergent drawer and loading door of the machine
ajar after every washing cycle. Thus, a humid environment
favorable for bacteria cannot occur in the machine.
Machine directly discharges the water it takes in.
• The drain hose might be at an inappropriate height. >>>
Connect the water drain hose as described in the user manual.
No water can be seen in the machine during
washing.
• Water level cannot be seen outside the machine. This is not a
failure.
Loading door cannot be opened.
• Door lock might be enabled because of the water level in the
machine. >>>
Drain the water by running the Pump or Spin
programme.
• Machine might be heating the water or at the spinning
step.>>>
Wait until the programme is complete.
• The loading door might be jammed due to the pressure it is
exposed to. >>>
Hold the grip, push and pull the loading door
to free it from the pressure and open it.
• The loading door will not open if there is no power. >>>
To
open the loading door, open the pump filter cap and pull down
the emergency handle positioned at the rear side of the said
cap. See “Loading door lock”
Washing takes longer than specified in the user
manual.(*)
• Water pressure might be low. >>>
Since the amount of the
water has decreased, the machine will wait until it takes
adequate water to avoid poor washing quality. Therefore, the
washing time extends.
• Voltage might be low. >>>
If the supply voltage is low, the
washing time is extended to prevent poor washing quality.
• Inlet temperature of water might be too low. >>>
The time
required to heat up the water extends in cold seasons. Also,
washing time can be extended to avoid poor washing results.
• The number of rinsing cycles and/or the amount of rinsing
water might have increased. >>>
When a better rinsing
performance is needed, the machine increases the amount of
rinsing water, and adds another rinsing cycle, if necessary.
• Excessive foam might have formed due to use of too much
detergent, and the automatic foam absorption system might
have been activated. >>>
Use the recommended amount of
detergent.
Programme time does not countdown. (On models
with display) (*)
• The timer may stop during water intake. >>>
The timer
indicator will not count down until the machine takes in an
adequate amount of water. When the amount of the water
taken in decreases, the machine will wait until it takes in
enough water to avoid poor washing results. Timer indicator
will resume countdown after this.
• The timer indicator might stop during heating. >>>
The timer
indicator will not count down until the machine reaches the
selected temperature.
• The timer indicator might stop during spinning. >>>
The
automatic unbalanced load detection system might have been
activated due to uneven distribution of the laundry in the drum.
40 / EN Washer-Dryer / User Manual
Colour of the clothes faded. (**)
• Machine might have been overloaded. >>>
Do not overload
the machine.
• Detergent used might be damp. >>> Keep detergents closed
in an environment free of humidity and do not expose them to
excessive temperatures.
• A high temperature might have been selected. >>> Select
a programme and temperature suitable for the type and soiling
degree of the laundry.
Rinsing performance is poor
• The amount, brand or storage conditions of the detergent might
not be suitable. >>> Use a detergent appropriate for the washing
machine and your laundry. Keep detergents closed in an environment
free of humidity and do not expose them to excessive temperatures.
• The detergent might have been added to the wrong compartment.
>>> If you add detergent to the prewash compartment even if
you have not selected a prewash programme, the machine might
take this detergent during the rinsing or softener step. Put the
detergent in the correct compartment.
• Pump filter might have been clogged. >>>
Check the filter.
• Drain hose might be folded. >>>
Check the drain hose.
Laundry became stiff after washing. (**)
• Insufficient amount of detergent might have been used. >>>
Using insufficient amount of detergent for the water hardness
can cause the laundry to become stiff in time. Use appropriate
amount of detergent according to the water hardness.
• The detergent might have been added to the wrong compartment.
>>> If you add detergent to the prewash compartment even if
you have not selected a prewash programme, the machine might
take this detergent during the rinsing or softener step. Put the
detergent in the correct compartment.
• Detergent might have been mixed with softener. >>> Do not mix the
detergent with softener. Wash and clean the drawer with hot water.
Laundry does not smell like softener. (**)
• The detergent might have been added to the wrong compartment.
>>> If you add detergent to the prewash compartment even if you
have not selected a prewash programme, the machine might take
this detergent during the rinsing or softener step. Wash and clean the
drawer with hot water. Put the detergent in the correct compartment.
• Detergent might have been mixed with softener. >>> Do not mix the
detergent with softener. Wash and clean the drawer with hot water.
Detergent residue in the detergent drawer. (**)
• Detergent might have been added to wet drawer. >>>
Dry the
detergent drawer before adding detergent.
• Detergent might have gotten damp. >>>
Keep detergents
closed in an environment free of humidity and do not expose
them to excessive temperatures.
• Water pressure might be low. >>>
Check the water pressure.
• The detergent in the main wash compartment got wet while
the machine was taking in the prewash water. Holes of the
detergent compartment might have been blocked. >>>
Check
the holes and clean if they are clogged.
• There might be a problem with the detergent drawer valves.
>>>
Call the Authorised Service Agent.
• Detergent might have been mixed with softener. >>> Do not mix the
detergent with softener. Wash and clean the drawer with hot water.
There is detergent left on the laundry.
• Machine might have been overloaded. >>>
Do not overload
the machine.
• Wrong programme and temperature might have been selected.
>>>
Select the right programme and temperature for the
laundry to be washed.
• Wrong detergent might have been used. >>>
Select a proper
detergent for the laundry to be washed.
Too much foam forms in the machine. (**)
• Improper detergents for the washing machine might have been
used. >>>
Use detergents suitable for washing machine.
• Excessive amount of detergent might have been used. >>>
Use only sufficient amount of detergent.
• Detergent might have been stored under inappropriate
conditions. >>>
Keep the detergent in a closed and dry area.
Do not store it in excessively hot places.
• Meshed laundry such as tulles might foam too much due to
their texture. >>>
Use less detergent for these types of fabrics.
• Detergent might have been put in the wrong compartment.
>>> Put the detergent in the correct compartment.
• Softener is taken early. >>> There might be a problem with the
valves or the detergent drawer. Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer.
• Excessive amount of detergent might have been used.
>>>>
Mix 1 tablespoonful softener and ½ l water and pour
into the main wash compartment of the detergent drawer.
• Put detergent into the machine suitable for the programmes
and maximum loads indicated in the “Programme and
consumption table”. If you use additional chemicals (stain
removers, bleaches and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
• Excessive foam might have formed due to use of too much
detergent, and the automatic foam absorption system might have
been activated. >>> Use the recommended amount of detergent.
Drying lasts too long.
• Machine might have been overloaded. >>> Do not
overload the machine.
• Spinning might not be sufficient for laundry. >>> Select
a higher spin speed in the washing step of the Washer-Dryer.
• Tap might be turned off. >>> Turn on the taps.
Laundry comes off wet after the drying step.
• The programme selected might not be suitable for the type
of laundry. >>>Check the care labels on garments and select a
programme accordingly, or select timed programmes additionally.
• Machine might have been overloaded. >>> Do not
overload the machine.
• Spinning might not be sufficient for laundry. >>> Select
a higher spin speed in the washing step of the Washer-Dryer.
41 / EN Washer-Dryer / User Manual
(*) Machine does not switch to spinning step
when the laundry is not evenly distributed in the
drum to prevent any damage to the machine
and to its surrounding environment. Readjust the
laundry and perform spinning again.
(**) The drum might not have been cleaned
regularly.
>>>
Clean the drum regularly. See 6.2
A
CAUTION!
• If you cannot eliminate the problem
although you follow the instructions in
this section, consult your dealer or the
Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
Machine does not start or programme cannot be started.
• Power cable might be unplugged. >>> Make sure that
the power cable is plugged in.
• Programme might not be set, or the Start/Pause/
Cancel button might not be pressed.
>>> Make sure the
programme is set and the machine is not in Stand-by mode.
• Child lock might be enabled. >>> Disable Child Lock.
Laundry shrinks, fades, tarnishes or gets damaged.
• The programme selected might not be suitable for the type
of laundry. >>>Check the care labels on garments and select a
programme accordingly, or select timed programmes additionally.
You should not dry laundry that is not suitable for drying.
Machine does not dry.
• Laundry might not be dried or the drying step might not
be enabled. >>>
Check if the drying function is selected
after the selected washing programme.
Loading door cannot be opened.
• The door of your machine might not be opening due to
safety reasons. >>>If the door locked indicator is active
on the display after the drying step, the machine will keep the
door locked for your safety until it cools down.
• The loading door will not open if there is no power.
>>> To open the loading door, open the pump filter cap and
pull down the emergency handle positioned at the rear side of
the said cap. See “Loading door lock”
A
WARNING!
• Check the HomeWhiz section for the
relevant troubleshooting information.
DISCLAIMER / WARNING (EN)
Some (simple) failures can be adequately handled by the end-user without any safety issue or unsafe use arising,
provided that they are carried out within the limits and in accordance with the following instructions (see the “Self-
Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be addressed to registered
professional repairers in order to avoid safety issues. A registered professional repairer is a professional repairer that
has been granted access to the instructions and spare parts list of this product by the manufacturer according to the
methods described in legislative acts pursuant to Directive 2009/125/EC.
However, only the service agent (i.e. authorized professional repairers) that you can reach through the phone
number given in the user manual/warranty card or through your authorized dealer may provide service under the
guarantee terms. Therefore, please be advised that repairs by professional repairers (who are not authorized by
Beko
) shall void the guarantee.
Self-Repair
Self-repair can be done by the end-user with regard to the following spare parts: door, door hinge and seals, other
seals, door locking assembly and plastic peripherals such as detergent dispensers (an updated list is also available in
support.beko.com as of 1st of March 2021).
Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done
following the instructions in the user manual for self-repair or which are available in support.beko.com. For your safety,
unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in
the user manuals for self-repair or which are available in support.beko.com, might give raise to safety issues not
attributable to Beko, and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the
mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional
repairers. On the contrary, such attempts by end-users may cause safety issues and damage the product and
subsequently cause fire, flood, electrocution and serious personal injury to occur.
By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or
registered professional repairers: motor, pump assembly, main board, motor board, display board, heaters etc.
The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above.
The spare part availability of the washing machine or washer-dryer that you purchased is 10 years. During this period,
original spare parts will be available to operate the washing machine or washer-dryer properly.
