Brother MFCJ775DWXL User Manual
Displayed below is the user manual for MFCJ775DWXL by Brother which is a product in the Multifunctionals category. This manual has pages.
Related Manuals
NOTE
NOTE species the operating environment, conditions for installation,
or special conditions of use.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injuries.
1Load paper in the paper tray
Pull the paper tray completely
out of the machine.
Open the output paper tray
cover a.
Connect the telephone line cord.
Use the jack marked LINE.
Follow the on-screen instructions to
install the ink cartridges.
The machine will prepare the ink
tube system for printing.
When the machine has finished the initial cleaning
process, follow the on-screen instructions to
configure the machine settings.
• Check print quality
• Set date and time
• Set Firmware Update Notice
• Print the installation sheet
Open the ink cartridge cover, and
then remove the orange protective
part from the machine.
Fan the paper well and load it in the tray,
and then adjust the paper guides.
Close the output paper tray cover, and
then slowly push the tray completely
into the machine.
Connect the power cord. The machine
will power on automatically.
NOTE
If your machine is sharing one telephone line with an external telephone,
connect it as shown below. Before you connect the external telephone,
remove the white protective cap c from the EXT. jack of the machine.
NOTE
You can adjust the control panel angle
to read the LCD more easily.
NOTE
Pull out the paper support a, and unfold
the paper support ap b so that the
printed pages do not fall.
a. Extension telephone
b. External telephone
c. Protective cap
Quick Setup Guide
MFC-J775DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
3Connect the power cord
4Install starter ink cartridges 5Machine settings
D00R62001-00
USA/CAN
Version 0
The correct Receive Mode is determined
by the external devices and telephone
subscriber services (Voice Mail,
Distinctive Ring, etc.) you will be using on
the same line as the Brother machine.
For more information, see Receive Modes
in chapter 6 of the Basic User’s Guide.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Local Language]. Press OK.
c. Select your language. Press OK.
3. Press Stop/Exit.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Receive Mode]. Press OK.
d. Press your preferred Receive Mode.
Press OK.
3. Press Stop/Exit.
Store your name and fax number so the
machine prints it on all outgoing fax pages.
For more information, see Enter Text on
Your Brother Machine in Appendix of the
Basic User’s Guide.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Station ID]. Press OK.
c. Enter your fax number (up to 20 digits) using the dial pad,
and then press OK.
d. Enter your name (up to 20 characters) using the dial pad,
and then press OK.
3. Press Stop/Exit.
6Choose your language
(if needed)
8Set your Station ID
If you are not using your machine as a fax, go to 9
2Connect the telephone line cord
If you are not using your machine as a fax, go to 3
7Choose the correct Receive Mode
If you are not using your machine as a fax, go to 9
Unpack the machine and check the components
1. Remove the protective tape and film covering the machine and the LCD.
2. Make sure you have all components shown below.
WARNING
Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid
the danger of suffocation, keep these bags away from babies and children, and dispose
of them correctly.
NOTE
Manuals in Spanish for these models are available at support.brother.com
Manuales en Español para este modelo están disponibles en support.brother.com
• Save all packing materials and the box in case for any reason you must ship your
machine.
• Interface cables are not included. You must purchase the correct interface
cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet
(2 meters) long.
Starter Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Basic User’s Guide
Product Safety Guide
Brother Installation Disc
Telephone Line Cord
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals
1
2
1
2
3
1
Watch our FAQ Videos for help
with setting up your Brother
machine.
support.brother.com/videos
Visit the Brother support website
support.brother.com
© 2017 Brother Industries, Ltd. All rights reserved.For FAQs, Troubleshooting, and to download software and manuals, visit support.brother.com. For product specifications, see the Online User’s Guide.
9Select a device to connect to your machine
10 Connect your computer
11 Alternative wireless setup
12 Print or scan using your mobile device
Your mobile device must be connected to the same wireless network as your Brother machine.
D00R62001-00
Put the installation disc into your CD/DVD drive, or
download the Full Driver & Software Package at:
For Windows®: support.brother.com/windows
For Mac: support.brother.com/mac
If you are using a recently released operating
system on your computer, visit the above websites
for updated driver and software information.
Follow the on-screen instructions and prompts.
For Windows®:
If the Brother screen does not appear automatically,
go to Computer (My Computer/This PC).
Double-click the CD/DVD-ROM icon, and then
double-click start.exe.
For Mac:
For full driver functionality, we recommend choosing
the CUPS driver when adding a printer.
If you cannot find this information, ask your network
administrator or wireless access point/router manufacturer.
If setup is not successful, restart
your Brother machine and your
wireless access point/router, and
repeat 11
Find your SSID (Network Name) and Network Key (Password) on your
wireless access point/router and write them in the table provided below.
Select the SSID (Network Name) for
your access point/router and enter the
Network Key (Password).
When the wireless setup is successful,
the LCD displays [Connected].
Go to 10 to install software.
Go to 12 to install apps.
SSID (Network Name)
Network Key (Password)
Computer Mobile Device
Go to 10 and follow the instructions. Go to 11 and follow the instructions.
For Computer
For Mobile Device
Finished
Can’t Connect? Check the following:
Brother regularly updates firmware to add features and apply bug fixes.
To check for the latest firmware, visit support.brother.com/up6.
Even if you do not have a wireless access point/router, you can connect
your device and your machine directly. For additional wireless network
support, go to support.brother.com/wireless-support.
Brother SupportCenter is a mobile app that provides the latest
support information for your Brother product.
Visit the App Store or Google Play™ to download.
Wireless network
USB connection
Restart your wireless access point/router
(if possible). If still not successful, go to 11
Disconnect the cable. If still not successful, visit support.brother.com
for FAQs and Troubleshooting.
Restart your machine and computer,
and then go to 10
Go to your machine, and press b to
display the wireless settings menu,
and then press a or b to select
[Setup Wizard]. Press OK.
Download and install the Mopria® Print Service app from
Google Play™ using your Android™ device.
Additional Wireless Support: support.brother.com/wireless-support
Download
Optional apps
You can print from and scan to your mobile device using various apps.
(USA only) For more information on apps, visit www.brother-usa.com/connect.
For instructions, see the Online User’s Guide.
SSID: XXXXXXX
Network key: XXXX
Download and install our free application Brother iPrint&Scan
from a mobile application store, such as the App Store, Google
Play™ or Microsoft® Store using your mobile device.