Contour Design ArmSupport Red User Manual
Displayed below is the user manual for ArmSupport Red by Contour Design which is a product in the Wrist Rests category. This manual has pages.
Related Manuals
Remove wrist rest
Make sure your RollerMouse Red is unplugged. Remo-
ve the short wrist rest if still attached, by using the key
that came with your RollerMouse. Insert the key into
the slot next to arrow on bottom of RollerMouse Red.
Turn in direction of arrow to release the short wrist rest
at each end. Separate the units.
Attach brackets
Turn the ArmSupport Red upside down on a at surface.
Loosely attach the brackets to the ArmSupport Red by
using the thumb screw in the hole in the small arch in the
bracket.
Slide the underarmsupport onto desk
Slide your underarmsupport with brackets attached
onto your desktop. Adjust placement as needed by
sliding thumb screws up and down the metal track.
Tighten slightly.
Slide the RollerMouse Red in
Align RollerMouse Red in the space between the
underarmsupport and your keyboard. Tighten the thumb
screws until the underarmsupport is fully secure. Attach
keyboard risers and plug your RollerMouse Red in. Your
underarmsupport is now ready to use.
Getting started
A
B
D
C
Technical specications
A. Width 49 cm
B. Depth (with RollerMouse Red) 13,5 cm
C. Width 60 cm
D. Depth 25,5 cm
Material on Armsupport Red Disinfectable leatherette
Warranty 2 years from date of
purchase
1. 2.
4.
4.
3.
Contour Design (UK) Ltd. | Kingsbury House | 468 Church Lane | London, NW9 8UA