Contour Design RollerMouse Free3 Wireless User Manual
Displayed below is the user manual for RollerMouse Free3 Wireless by Contour Design which is a product in the Mice category. This manual has pages.
Related Manuals
RollerMouse Free3
Wireless
User Guide
RollerMouse Free3 Wireless user manual
Box Contents
1. RollerMouse Free3 Wireless
2. Two short keyboard risers
3. Two long keyboard risers
4. Wireless receiver
5. USB 2.0 cable adapter
6. Charging cable
1
2 3
4
5
6
/1
RollerMouse Free3 Wireless user manual
RollerMouse Functions
A. Rollerbar
B. Cursor speed and battery level indicator
C. Copy
D. Paste
E. Back
F. Forward
G. Left-click
H. Right-click
I. Scroll wheel
J. “One Touch” double-click
For additional mouse features and specic
Mac settings, please download our driver at
www.contour-design.co.uk.
J
/2
RollerMouse Free3 Wireless user manual
Keyboard Positioning
Before plugging in the unit, take a moment to check the height and angle of
your keyboard, and nd the arrangement that’s most comfortable for you.
Use the risers to achieve the correct angle and height regardless of the type
of keyboard you are using. The spacebar on your keyboard should come
just above your rollerbar. To acheive a proper ergonomic position, the front
edge of the keyboard should be as close to the rollerbar.
Contour Design’s Balance Keyboard is a perfect option for the Free3
Wireless. Designed specically for the RollerMouse, the Balance Keyboard
sits level with the rollerbar and can be easily adjusted to a positive, neutral,
or negative tilt.
Positive Tilt
Neutral TiltNegative Tilt
/3
RollerMouse Free3 Wireless user manual
Inserting the Keyboard Risers
Fit the end of the riser into the slot on the back of the RollerMouse
Free3 Wireless.
Line up the short and long risers and then press the two parts
together until you hear them snap into place.
2
2
2
3
3
2
Negative Tilt
Neutral Elevated
Neutral Flat
Positive Tilt
/4
RollerMouse Free3 Wireless user manual
Power switch Connecting to a computer
USB 2.0 cable adapter
The power switch can be found on the underside of the Free3
Wireless. Make sure the power switch is set to ON before pairing
with your computer.
Plug the wireless receiver or the charging cable into
the computer’s USB port. Allow your computer a few seconds
to automatically install.
This cable provides a stronger connectivity* for wireless 2.0 USB
devices when connected to USB 3.0 hubs.
If you nd the reception of the device is not optimal, please use the
included USB cable adapter for your convenience.
* For more information on USB 2.0 wireless products in connection with USB
3.0 hubs, please visit our website at www.contourdesign.co.uk.
4 6
5
The Free3 Wireless features an optimized power management. Turning
o the device is only necessary for permanent storage or during travel.
/5
RollerMouse Free3 Wireless user manual
Using the rollerbar Click Force Tension Adjustment
The rollerbar provides two functions:
• Cursor movement is performed by moving the rollerbar
from side to side, and up and down.
• Left click is performed by pressing down on the rollerbar.
For optimal control, you can adjust the amount of pressure required to
perform a mouse click. Use the click force tension slider located under your
RollerMouse Free3 Wireless. Simply slide it until you nd the click control
that works best for you.
A
/6
RollerMouse Free3 Wireless user manual
Turn Bar-Click ON/OFF
To turn o the click functionality in the rollerbar, hold down Cursor Speed
button, and press the rollerbar .
Repeating this process will re-activate the click functionality in the rollerbar.
A
B
/7
Changing the ‘Double’ click button to ‘Middle’
button function
To change double click button to function as a middle click, hold
buttons and for two seconds until LED lights ash to conrm.
Repeating this process will revert back to double click functionality.
B
B J
B
J
RollerMouse Free3 Wireless user manual
Battery level
Free3 Wireless has a built-in rechargeable battery. To see the battery
level on your device, press the Cursor Speed button once. The Free3
Wireless will rst display the current DPI level, then display the current
battery level (Red, Orange, Green).
If your Free3 Wireless is running low on battery, the center LED light will
start blinking in red.
To charge your battery, plug the charging cable into your Free3 Wireless
and connect it to a USB port on your computer.
Free3 Wireless has an expected battery life of approx. 1 month, with daily
use.
B
Full Battery
Half Battery
Low Battery
/8
RollerMouse Free3 Wireless user manual
Change cursor speed
Press the Cursor Speed button to cycle through cursor speeds. There
are ten speed selections which range from slow (600 DPI) to fast (2800 DPI).
Speed can be identied by the LED lights as shown.
To see the current DPI level, press the Cursor Speed button once.
B
B
B
/9
RollerMouse Free3 Wireless user manual
Operating system
RollerMouse Free3 Wireless has 3 modes. PC- mode , Mac-mode and
HID-mode. Use the following key commands to switch settings to best
t your operating system.
+ : PC Mode (Hold down the Cursor Speed and press Copy)
+ : Mac Mode (Hold down the Cursor Speed and press Paste)
+ : HID Mode (Hold down the Cursor Speed and press Back)
B
B
C
D
C
DB
E
BE
Dierent Mode Settings
PC - Mode
MAC - Mode
HID - Mode
LED’s light up from
left to right.
LED’s light up from
right to left.
LED’s light up from
both sides towards
the middle.
Windows
OS
Linux
/10
FCC Statement
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC: “ before the certication/registration number only signies that the Industry Canada technical specications were met. This
product meets the applicable Industry Canada technical specications.
Le présent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils radio exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement
For more information please visit:
www.contour-design.co.uk
Kingsbury House
468 Church Lane
London, NW9 8UA
United Kingdom
Phone: +45 70 27 02 27
Email: info@contour-design.com
Tested to comply with FCC
and IC standards
Warranty
If there is a functional defect due to faulty manufacturing, we will replace the product. This warranty does not cover
damage that results from misuse of the product.
Attention!
If you attempt to dismantle your RollerMouse, you will invalidate your warranty.