Table of Contents
- Contents
- About this document
- Appearance and ports of the monitor
- Powering on and off the monitor
- Adjusting the angle and height of the monitor
- Wireless projection (only supported by HSN-CBA monitors)
- Connecting the monitor to a wireless network (only supported by HSN-CBA monitors)
- Connecting the monitor with a cable
- Connecting a Bluetooth keyboard or mouse (only supported by HSN-CBA monitors)
- Setting the OSD menu of the monitor
- FAQs
- Safety information
- Electronic device
- Interference with medical equipment
- Protecting your hearing when using a headset
- Areas with flammables and explosives
- Operating environment
- Child's safety
- Accessories
- Power adapter safety
- Cleaning and maintenance
- Disposal and recycling information
- Reduction of hazardous substances
- Restrictions in Norway
- Legal Notice
- Copyright © Huawei 2021. All rights reserved.
- Trademarks and Permissions
- Notice
- Third-Party Software Statement
- DISCLAIMER
- Import and Export Regulations
- Privacy Policy
- For More Help
- ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
Huawei MateView User Manual
Displayed below is the user manual for MateView by Huawei which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
User Guide
Contents
About this document
Appearance and ports of the monitor
Powering on and o the monitor
Adjusting the angle and height of the monitor
Wireless projection (only supported by HSN-CBA
monitors)
Connecting the monitor to a wireless network (only
supported by HSN-CBA monitors)
Connecting the monitor with a cable
Connecting a Bluetooth keyboard or mouse (only supported
by HSN-CBA monitors)
Setting the OSD menu of the monitor
FAQs
Safety information
Legal Notice
i
About this document
Please read this document rst before you begin using the device.
Some components mentioned in the document may not be included with the device and you
need to purchase them separately. Some features described in this document are only
available when they are used together with other components. The gures and Graphical
User Interfaces (GUIs) in this document may be dierent from the actual ones and all gures
are for reference only.
1
Appearance and ports of the monitor
2
1HUAWEI Smart Bar
•When the screen is o or in sleep mode, you can tap the HUAWEI Smart Bar using
one nger to wake up the screen.
•When the monitor is powered on and connected to an external device in wired or
wireless projection mode, the monitor will display the screen of the external device.
In this case, if the OSD menu is not displayed, you can:
•Slide on the HUAWEI Smart Bar with one nger to adjust the speaker volume of
the monitor.
•Slide on the HUAWEI Smart Bar with two ngers to open the input source
switching screen and quickly switch between input sources.
•Tap the HUAWEI Smart Bar with one nger to display the OSD menu.
•When the monitor is powered on and the OSD menu or system image is displayed
on the monitor, you can adjust the monitor settings by performing operations on
the HUAWEI Smart Bar .
•Slide on the HUAWEI Smart Bar with one nger to switch between options.
•Tap the HUAWEI Smart Bar with one nger to conrm the selection.
•Double-tap the HUAWEI Smart Bar with one nger to return or exit.
Only HSN-CBA monitors support wireless projection. When a monitor is
powered on and there is no signal input, the monitor will display its own
system desktop. During wireless projection, you can double-tap the
HUAWEI Smart Bar with one nger to exit.
2Speaker
Plays sounds.
3Microphone
Located on both sides of the monitor base.
Used for video conferences, voice calls, and recordings.
You can only use the microphone of the monitor when the monitor is
connected to a desktop computer or a laptop (with the USB-A end connected
to the computer) through a USB-C to USB-A cable, or when connected to a
device such as a laptop through the USB-C to USB-C cable delivered with the
monitor.
Appearance and ports of the monitor
3
4* Huawei Share sensor
Tap the NFC detection area of certain phones against your screen's Huawei Share
sensor to implement wireless projection.
This component is only available with HSN-CBA monitors.
5USB-A (USB 3.2 Gen 1) port
•Charges devices such as phones with up to 5 V DC/1 A.
•Connects to devices such as wired keyboards and mice.
•When connecting the monitor to the computer using the HDMI cable or MiniDP-
to-DP cable, if you want to connect a keyboard and a mouse to the monitor to
reversely control the computer, you also need to use a USB-C to USB-A cable to
connect the monitor to the computer. Ensure that the USB-A end of this cable is
connected to the computer.
•When connecting the monitor to a device such as a laptop or phone using the
USB-C to USB-C cable delivered with the monitor, you can connect a keyboard
and a mouse to the monitor to reversely control the device.
•When an HSN-CBA monitor is displaying its own system desktop, the keyboard
and mouse can be connected to control the monitor.
6USB-C port
•Charges mobile devices such as laptops that support the PD protocol with up to 20
V/3.25 A fast charging.
•Connects the monitor to a computer using the USB-C to USB-C cable delivered
with the monitor.
7Headset jack
Connects to a headset.
8Power button
Turns on and o the monitor.
9USB-C power port
Connects to a power adapter to supply power to the monitor.
10 MiniDP port
Connects the monitor to devices such as computers through a MiniDP cable.
11 HDMI port
Connects the monitor to devices such as computers through an HDMI cable.
Appearance and ports of the monitor
4
Powering on and o the monitor
•When the monitor is powered o, the screen is turned o, or the monitor is in sleep mode,
you can press the power button to power on the monitor.
•When the monitor is powered on, you can press and hold the power button for more than
3s to power o the monitor.
•When the screen is on, you can press the power button to turn o the screen.
•When the monitor is powered on but there is no signal input, the monitor will
automatically enter sleep mode.
After power saving mode is enabled for an HSN-CBA monitor, the monitor will
automatically enter deep sleep mode and disable Wi-Fi and Bluetooth when the
monitor is powered on but there is no signal input. To enable power saving mode, tap
the HUAWEI Smart Bar with one nger when the device is powered on and there is
signal input, open the OSD menu, and go to > .
5
Adjusting the angle and height of the
monitor
Hold the monitor panel with both hands, rotate the panel to adjust the angle, and move the
panel up and down to adjust its height.
It can tilt downward up to 5° (±2°) and tilt upward up to 18° (±2°). The height can be
adjusted by 110 mm (±5 mm).
To avoid damaging the screen, do not press the screen with excessive force when
adjusting the angle and height of the monitor or moving the monitor.
6
Wireless projection (only supported by
HSN-CBA monitors)
The screen of a phone or computer can be quickly projected without cables to the monitor,
giving users a cross-screen experience.
Projecting a phone's screen
1Turn on NFC, Wi-Fi, and Bluetooth in the notication panel of a phone.
2When the monitor is powered on and the phone screen is unlocked, tap your phone's NFC
detection area against on the center of the monitor base until the phone rings or
vibrates. Then move the phone away and follow the onscreen instructions.
3The phone's screen is then projected to the monitor. When you operate the phone, the
phone's screen will be synced to the monitor.
7
•This feature is only supported by certain Huawei phones that support NFC or wireless
projection.
•If your phone is running an earlier version, you may need to connect your phone to the
same Wi-Fi network as the monitor before projecting your phone's screen to the
monitor. Follow the onscreen instructions to nish connecting. To enjoy a better
experience with this feature, update your phone to the latest version.
•If your phone's screen cannot be projected through one-touch projection, enable
in the notication panel of your phone, search for nearby devices, select your wireless
monitor, and follow the onscreen instructions.
•If it is the rst time that your phone is connected to the monitor, you may be required
to enter the pairing code. In this case, perform operations as prompted.
•If the monitor is connected to another device through a cable and the screen of the
device is displayed on the monitor, you are advised to slide on the HUAWEI Smart Bar
with two ngers to switch the input source to . After the monitor displays its own
desktop, perform the preceding operations to project your phone's screen.
Projecting a computer's screen
1Power on both the monitor and computer.
2Click at the bottom of the computer desktop, click to open the projection
page, and connect the computer to a wireless monitor.
If the icon is not displayed, expand the shortcut operation area to nd the icon.
3On your computer, search for nearby devices, select your wireless monitor, and follow the
onscreen instructions.
4The computer's screen is then projected to the monitor. When you operate the computer,
the computer's screen will be synced to the monitor.
Wireless projection (only supported by HSN-CBA monitors)
8
•This feature is only available with Windows computers that support wireless projection.
•If the monitor is connected to another device through a cable and the screen of the
device is displayed on the monitor, you are advised to slide on the HUAWEI Smart Bar
with two ngers to switch the input source to . After the monitor displays its own
desktop, perform the preceding operations to project your computer's screen.
Wireless projection (only supported by HSN-CBA monitors)
9
Connecting the monitor to a wireless
network (only supported by HSN-CBA
monitors)
1Switch the monitor to no signal input to display its own system desktop.
•If the monitor is in wireless projection mode, disconnect it from your phone or
computer, or double-tap the HUAWEI Smart Bar with one nger on the monitor to exit
wireless projection.
•If the monitor is connected to an external device through a cable and the screen of the
external device is being displayed on the monitor, slide on the HUAWEI Smart Bar with
two ngers to switch the input source to to exit wired connection.
2Tap the HUAWEI Smart Bar, go to > , and follow the onscreen instructions to
nish connecting to a network.
•If your monitor is not connected to a mouse, the Wi-Fi Network screen will display a
page for installing the AI life app. You can use a Huawei phone to download and
install the AI life app and use the app to nish connecting.
•If your monitor has been connected to an external mouse, the list of available Wi-Fi
networks will be displayed after you click the icon. Select the corresponding
Wi-Fi name to connect to the Wi-Fi network. You can also touch AI life under the
Wi-Fi network list and follow the onscreen instructions to nish connecting using the
AI life app.
•If you are using the AI life app for the rst time, you will need to sign in with your
HUAWEI ID.
•If no dialog box is displayed for discovering the monitor, tap and then tap
Add device at the top of the AI life app. The app will automatically scan for nearby
devices. You can also manually add devices or scan the QR code of the monitor to
add devices.
•In addition to conguring the Wi-Fi network for the monitor, you can tap the
monitor icon on the AI life app to access the device control screen and customize
some of the monitor's functions, such as changing the monitor's name.
10
Connecting the monitor with a cable
The device does not come with certain components and cables and you need to purchase
them separately.
USB-C to USB-C cable connection
Use a cable to connect a device such as a laptop or a phone to the monitor to operate the
device on the large screen of the monitor and charge the device simultaneously.
1Connect one end of the USB-C to USB-C cable delivered with the monitor to the USB-C
port of the monitor, and connect the other end to the USB-C port of a device such as a
laptop. (The USB-C port of the connected device needs to support display, data
transmission, and charging.)
2Power on the monitor and the connected device. If the screen of the connected device is
displayed on the monitor, it indicates that the connection is successful.
3Connect a keyboard and a mouse to the USB-A ports on the monitor so that you can
reversely operate the connected device on the monitor.
If the screen of the connected device is not automatically displayed on the monitor,
tap and switch the input source to USB-C.
11
HDMI cable connection
1Connect one end of an HDMI cable to the HDMI port on a computer and the other end to
the HDMI port on the monitor.
2Connect devices such as a keyboard and a mouse as required. To connect such a device to
a monitor, connect the USB-A end of a USB-C to USB-A cable to the computer and the
other end to the monitor.
3Power on both the monitor and computer and wait a moment. If the system desktop of
the computer is displayed on the monitor, it indicates that the connection is successful.
For monitors of certain models, the system desktop of the monitor may be displayed
when the monitor is powered on for the rst time. You can switch the input source to
HDMI as prompted to access the system desktop of the computer. After you power on
the monitor again, the system desktop of the computer will be automatically
displayed on the monitor.
Connecting the monitor with a cable
12
MiniDP-to-DP cable connection
1Connect the MiniDP end of the MiniDP-to-DP cable to the monitor and connect the DP
end to the desktop computer.
2Connect devices such as a keyboard and a mouse as required. To connect such a device to
a monitor, connect the USB-A end of a USB-C to USB-A cable to the desktop and the
other end to the monitor.
3Power on both the monitor and desktop computer and wait a moment. If the system
desktop of the computer is displayed on the monitor, it indicates that the connection is
successful.
For monitors of certain models, the system desktop of the monitor may be displayed
when the monitor is powered on for the rst time. You can switch the input source to
MiniDP as prompted to access the system desktop of the computer. After you power
on the monitor again, the system desktop of the computer will be automatically
displayed on the monitor.
Connecting the monitor with a cable
13
Connecting a Bluetooth keyboard or
mouse (only supported by HSN-CBA
monitors)
HSN-CBA monitors support Bluetooth and therefore can be connected to a Bluetooth
keyboard or mouse.
1When the monitor displays its own system desktop, tap the HUAWEI Smart Bar and go to
> . The monitor will then search for nearby Bluetooth devices.
If the monitor displays the screen of an external device, slide on the
HUAWEI Smart Bar with two ngers and switch the input source to . The system
desktop of the monitor will then be displayed.
2Turn on the Bluetooth switch of the keyboard and mouse so that they can be detected.
3Select your Bluetooth device on the monitor. After the connection is established, you can
use the Bluetooth mouse and keyboard to operate the monitor. Alternatively, you can
reversely operate the external device connected to the monitor in the following scenarios:
•A phone is projected to the monitor through wireless projection. (Note that if the
system version of a phone is low, the phone may not support reverse operations using
the Bluetooth keyboard and mouse.)
•A device such as a phone or laptop is connected to the monitor through the USB-C to
USB-C cable delivered with the monitor.
•A computer is connected to the monitor through an HDMI cable and a USB-C to
USB-A cable, or through a MiniDP to DP cable and a USB-C to USB-A cable. (The
USB-A end of the USB-C to USB-A cable must be connected to the computer.).
14
Setting the OSD menu of the monitor
1When the monitor is powered on, connect the monitor to an external device in wired or
wireless projection mode. When the monitor displays the screen of the external device, tap
the HUAWEI Smart Bar with one nger to open the OSD menu.
2Set the OSD menu by following the instructions on the gestures of the
HUAWEI Smart Bar.
3After nishing setting the OSD menu, double-tap the HUAWEI Smart Bar to exit the OSD
menu. Alternatively, wait a moment for the OSD menu to automatically exit.
OSD menu descriptions
The OSD menu varies depending on the monitor model.
Enables or disables Eye Comfort mode.
It is recommended that you enable Eye Comfort mode if you are going to
read for a long time. After Eye Comfort mode is enabled, it is normal that
the screen has a yellow cast.
Adjusts the brightness.
Switches the input source.
Switches the color gamut.
Enables or disables power saving mode.
Only HSN-CBA monitors support power saving mode.
Adjusts the volume of the speaker and microphone.
Adjusts the display settings of the monitor.
Switches the language of the OSD menu on the monitor.
Restores the OSD menu of the monitor to factory settings.
15
FAQs
The monitor cannot be powered on
Check whether the power cable is connected to the monitor and the power socket correctly.
No image is displayed on the monitor in wired projection
•Check whether all cables are connected correctly.
•Check whether all devices such as the monitor and computer are powered on.
•Check whether the HDMI or DP cable is damaged.
•If the preceding problems do not occur, restart the monitor and check whether images can
be properly displayed on the monitor.
The screen is too bright or dark
Open the settings menu of the monitor and adjust the screen brightness and contrast.
The screen color is abnormal
•Check whether the HDMI or DP cable is damaged. For example, check whether the pins are
twisted.
•Open the settings menu of the monitor and adjust the color temperature.
16
Safety information
This section contains important information about the operation of your device. It also
contains information about how to use the device safely. Read this information carefully
before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing so
causes danger or interference with other electronic devices.
Interference with medical equipment
•Follow rules and regulations set forth by hospitals and health care facilities. Do not use
your device where prohibited.
•Some wireless devices may aect the performance of hearing aids or pacemakers. Consult
your service provider for more information.
•Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained
between a device and a pacemaker to prevent potential interference with the pacemaker. If
using a pacemaker, hold the device on the side opposite the pacemaker and do not carry
the device in your front pocket.
•Please consult your doctor and the device manufacturer to determine if using your device
may interfere with the operation of your medical device.
Protecting your hearing when using a headset
• To prevent possible hearing damage, do not listen at high volume levels for long
periods.
•Using a headset at high volumes may damage your hearing. To reduce this risk, lower the
headset volume to a safe and comfortable level.
Areas with ammables and explosives
•Do not use the device where ammables or explosives are stored (in a gas station, oil
depot, or chemical plant, for example). Using your device in these environments increases
the risk of explosion or re. In addition, follow the instructions indicated in text or symbols.
•Do not store or transport the device in containers with ammable liquids, gases, or
explosives.
Operating environment
•Avoid dusty, damp, or dirty environments. Avoid magnetic elds. Using the device in these
environments may result in circuit malfunctions.
•Before connecting and disconnecting cables, stop using the device and disconnect it from
the power supply. Ensure that your hands are dry during operation.
17
•During thunderstorms, power o your device and remove all cables connected to it to
protect against lightning strikes.
•Do not use your device during thunderstorms to protect your device against any danger
caused by lightning.
•Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -10 °C to
+45 °C. Extreme heat or cold may damage your device or accessories.
•To protect your device or accessories from re or electrical shock hazards, avoid rain and
moisture.
•Keep the device away from sources of heat and re, such as a heater, microwave oven,
stove, water heater, radiator, or candle.
•Stop using your device or applications for a while if the device is overheated. If skin is
exposed to an overheated device for an extended period, low temperature burn symptoms,
such as red spots and darker pigmentation, may occur.
•Do not allow children or pets to bite or suck the device or accessories. Doing so may result
in damage or explosion.
•Observe local laws and regulations, and respect the privacy and legal rights of others.
•Do not place any object, such as a candle or a water container, on the device. If any foreign
object or liquid enters the device, immediately stop using it, power it o, and remove all
cables connected to it. Then, contact a Huawei authorized service center.
Child's safety
•Comply with all precautions with regard to child's safety. Letting children play with the
device or its accessories may be dangerous. The device includes detachable parts that may
present a choking hazard. Keep away from children.
•The device and its accessories are not intended for use by children. Children should only use
the device with adult supervision.
Accessories
•Using an unapproved or incompatible power adapter, charger or battery may cause re,
explosion or other hazards.
•Choose only accessories approved for use with this model by the device manufacturer. The
use of any other types of accessories may void the warranty, may violate local regulations
and laws, and may be dangerous. Please contact your retailer for information about the
availability of approved accessories in your area.
Power adapter safety
•The power plug is intended to serve as a disconnect device.
•For pluggable devices, the socket-outlet shall be installed near the devices and shall be
easily accessible.
•Unplug the power adapter from electrical outlets and the device when not in use.
Safety information
18
•If the power cable is damaged (for example, the cord is exposed or broken), or the plug
loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or
re.
•Do not touch the power cord with wet hands or pull the power cord to disconnect the
power adapter.
•Do not touch the device or the power adapter with wet hands. Doing so may lead to short
circuits, malfunctions, or electric shocks.
Cleaning and maintenance
•Keep the device and accessories dry. Do not attempt to dry it with an external heat source,
such as a microwave oven or hair dryer.
•Do not expose your device or accessories to extreme heat or cold. These environments may
interfere with proper function and may lead to re or explosion.
•Avoid collision, which may lead to device malfunctions, overheating, re, or explosion.
•Before you clean or maintain the device, stop using it, stop all applications, and disconnect
all cables connected to it.
•Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and
benzene) to clean the device or accessories. These substances may cause damage to parts
or present a re hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
•Do not dismantle or remanufacture the device and its accessories. This voids the warranty
and releases the manufacturer from liability for damage. In case of damage, contact a
Huawei authorized service center for assistance or repair.
•If the device screen is broken in a collision, immediately stop using the device. Do not touch
or attempt to remove the broken parts. Promptly contact a Huawei authorized service
center.
Disposal and recycling information
The symbol on the product, battery, literature, or packaging means that the products and
batteries should be taken to separate waste collection points designated by local authorities
at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner
that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste
disposal service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction
of the use of certain hazardous substances in electrical and electronic equipment, such as EU
REACH regulation, RoHS and Batteries (where included) directive. For declarations of
Safety information
19
conformity about REACH and RoHS, please visit the website
https://consumer.huawei.com/certication.
Restrictions in Norway
Use of this radio equipment is not allowed in the geographical area within a radius of 20 km
from the center of Ny-Ålesund, Svalbard.
Safety information
20
Legal Notice
Copyright © Huawei 2021. All rights reserved.
The product described in this manual may include copyrighted software of Huawei and
possible licensors. Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the
said software, unless such restrictions are prohibited by applicable laws or such actions are
approved by respective copyright holders.
Trademarks and Permissions
The
Bluetooth
® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
and any use of such marks by Huawei Technologies Co., Ltd. is under license. Huawei Device
Co., Ltd. is an aliate of Huawei Technologies Co., Ltd.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.
The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
Other trademarks, product, service and company names mentioned may be the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and therefore may not be activated or may
be limited by local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which you
purchase.
Huawei reserves the right to change or modify any information or specications contained in
this manual without prior notice and without any liability.
Third-Party Software Statement
Huawei does not own the intellectual property of the third-party software and applications
that are delivered with this product. Therefore, Huawei will not provide any warranty of any
kind for third party software and applications. Neither will Huawei provide support to
customers who use third-party software and applications, nor be responsible or liable for the
functions or performance of third-party software and applications.
Third-party software and applications services may be interrupted or terminated at any time,
and Huawei does not guarantee the availability of any content or service. Third-party service
providers provide content and services through network or transmission tools outside of the
control of Huawei. To the greatest extent permitted by applicable law, it is explicitly stated
21
that Huawei shall not compensate or be liable for services provided by third-party service
providers, or the interruption or termination of third-party contents or services.
Huawei shall not be responsible for the legality, quality, or any other aspects of any software
installed on this product, or for any uploaded or downloaded third-party works in any form,
including but not limited to texts, images, videos, or software etc. Customers shall bear the
risk for any and all eects, including incompatibility between the software and this product,
which result from installing software or uploading or downloading the third-party works.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR
LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED
SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF
HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL
BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be
responsible to obtain all necessary governmental permits and licenses in order to export, re-
export or import the product mentioned in this manual including the software and technical
data therein.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy
at https://consumer.huawei.com/privacy-policy.
For More Help
Visit https://consumer.huawei.com/en/support for the most up-to-date contact information
for your country or region.
ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE
DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE
ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED.
Legal Notice
22