Table of Contents
- Contents
- About this document
- Appearance and ports
- Setting up the monitor
- Wall
Mounting
- •An optional wall mount can be used with your device. Consult with your local dealer to purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at the rear of the device. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the device to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. Please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connecting to external devices.•Prevent the holes on the device from being blocked by any objects and leave a space of more than 10 cm around the device for heat dissipation.•Disconnect the power before moving or installing the device. Failing to do so may result in electric shocks.•Remove the stand before installing the device on a wall mount by following the steps for stand attachment in reverse.•If you install the device on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized wall mount and contact your local dealer or qualified personnel. Otherwise it is not covered by the warranty.•Do not over tighten the screws as this may cause damage to the device and void your warranty.•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.•Use screws and wall mounts that meet the following specifications. Any damages or injuries resulting from misuse or using improper accessories are not covered by the warranty.
- ModelZQE-CAAZQE-CBAScrewDiameter (mm)M4M4Length (mm)When wall mount thickness is 2mm1010Quantity44VESA screw hole specs (A x B) in millimeters100 × 100100 × 100
- Connecting the monitor to a device such as a computer
- Setting the OSD menu
- Safety information
- Legal Notice
- Copyright © Huawei 2021. All rights reserved.
- Trademarks and Permissions
- Notice
- DISCLAIMER
- Import and Export Regulations
- Privacy Policy
- For More Help
- ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
Huawei MateView GT User Manual
Displayed below is the user manual for MateView GT by Huawei which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
User Guide
About this document
Please read this document rst before you begin using the device.
Some components mentioned in the document may not be included with the device and you
need to purchase them separately. Some features described in this document are only
available when they are used together with other components. The gures and Graphical
User Interfaces (GUIs) in this document may be dierent from the actual ones and all gures
are for reference only.
1
Appearance and ports
•The conguration varies depending on the monitor model.
•The USB-C to USB-C cable and the USB-C to USB-A cable mentioned in the following
sections are delivered with the ZQE-CAA monitor. If non-standard cables are used,
some features may be unavailable.
2
1* Microphone
Used for video conferences, voice calls, and recordings.
•To use the microphone, use a USB-C to USB-C cable or a USB-C to USB-A
cable to connect the monitor to a computer.
•This component is only available with ZQE-CAA monitors.
25-way directional button
•Turns the monitor on or o and serves as an indicator.
•Press this button upward. After the brand logo is displayed on the monitor screen,
the indicator will blink and the monitor will then turn on.
•Press and hold this button upward for more than three seconds. The indicator will
be o and the monitor will then turn o.
•The indicator is o when the monitor is working.
•The indicator blinks when the monitor is in standby mode.
•Adjusts the monitor settings. For details, see the section "Setting the OSD menu".
•Locks or unlocks the button. When the monitor is powered on and the on-screen
display (OSD) menu is not opened, press this button when facing the screen until a
message is displayed. You will then be able to lock or unlock the button.
3* SoundBar
•Plays sound from the built-in speaker.
•Adjusts the speaker volume.
•Tap the touch area of the SoundBar with one nger to display the speaker
volume bar on the screen. Swipe left or right on the touch area of the SoundBar
with one nger to adjust the volume.
•Double-tap the touch area of the SoundBar with one nger to mute or unmute
the speaker.
•Displays the light eect.
This component is only available with ZQE-CAA monitors. A ZQE-CBA monitor
comes with a standard support in this position.
4USB-C power port
Connects to a power adapter to supply power to the monitor.
Appearance and ports
3
5HDMI port
Connects to a device such as a computer through the HDMI port.
6Display port (DP)
Connects to a device such as a computer through the DP.
7* USB-C port
•Charges a device that supports PD 5 V 2 A .
•Supports the display by connecting to a device such as a phone or tablet through a
USB-C to USB-C cable.
This component is only available with ZQE-CAA monitors.
8* Headset jack
Connects to a headset.
This component is only available with ZQE-CAA monitors.
Appearance and ports
4
Setting up the monitor
1Unpack the cardboard box and place the box horizontally with the arrow on the foam
facing upward. Take the device and foam out of the box and place them horizontally. Take
the base support out of the foam.
For the ZQE-CBA monitor, you also need to connect the base and support with screws.
2Tilt and insert the upper end of the base support into the slot at the rear of the monitor,
then press the base support downwards until you hear a clicking sound, which indicates
that the base support has been set up correctly.
3Hold the assembled monitor with both hands and place it on a at desk. To avoid
damaging the screen, do not press the screen when holding it.
5
Removing the monitor from the base support
Place the monitor facing downward on the curved foam in the original package, push the
quick release button on the rear of the monitor upward, and lift the base support from the
monitor.
Before installing the base support, ensure that there are no objects made of iron attached
to the support at the rear of the monitor, otherwise a short circuit may occur.
Setting up the monitor
6
Wall Mounting
The SoundBar of the ZQE-CAA monitor cannot be used when the monitor is wall-
mounted.
•An optional wall mount can be used with your device. Consult with your local dealer to
purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at
the rear of the device. Install the wall mount bracket on a solid wall perpendicular to the
oor. If you are attaching the device to other building materials, please contact qualied
personnel to install the wall mount. Detailed instructions will be included with the wall
mount. Please use a wall mount bracket where the device is adequately secured to the wall
with enough space to allow connecting to external devices.
•Prevent the holes on the device from being blocked by any objects and leave a space of
more than 10 cm around the device for heat dissipation.
•Disconnect the power before moving or installing the device. Failing to do so may result in
electric shocks.
•Remove the stand before installing the device on a wall mount by following the steps for
stand attachment in reverse.
•If you install the device on a ceiling or slanted wall, it may fall and result in severe injury.
Use an authorized wall mount and contact your local dealer or qualied personnel.
Otherwise it is not covered by the warranty.
•Do not over tighten the screws as this may cause damage to the device and void your
warranty.
•To prevent injury, this apparatus must be securely attached to the oor/wall in accordance
with the installation instructions.
•Use screws and wall mounts that meet the following specications. Any damages or injuries
resulting from misuse or using improper accessories are not covered by the warranty.
Model ZQE-CAA ZQE-CBA
Screw
Diameter (mm) M4 M4
Length (mm)
When wall mount thickness is 2mm 10 10
Quantity 4 4
VESA screw hole specs (A x B) in millimeters 100 × 100 100 × 100
7
A
B
Wall Mounting
8
Connecting the monitor to a device such
as a computer
•The device does not come with certain components and cables and you need to
purchase them separately.
•Standard cables vary depending on the monitor model.
Open the protective cover on the bottom part of the monitor rear to view the ports. You can
connect the monitor to a device such as a computer based on the cable type.
•You will see a monitor nameplate attached under the ports and information such as
S/N on the nameplate.
•After the cables are connected, we recommended that you arrange the cables and
reinstall the protective cover to prevent dust from entering the ports.
•You can adjust the tilting angle and height of the monitor as required.
DP or HDMI cable connection
1Connect one end of a DP or HDMI cable to the DP or HDMI port on the monitor, and
connect the other end to the DP or HDMI port on a computer.
If you want to use the microphone of the ZQE-CAA monitor, you also need a USB-C to
USB-A cable to connect the monitor to the computer.
2Connect other cables such as power cables for the monitor and computer and then power
on the monitor and computer. If the monitor screen is turned on, it indicates that the
connection is successful.
9
USB-C to USB-C cable connection
•This connection only applies to ZQE-CAA monitors.
•It is recommended that you use the USB-C to USB-C cable delivered with the monitor.
If a non-standard cable is used, some features may be unavailable.
•The USB-C port of an external device must be a port that supports display, data
transmission, and charging.
•This connection supports charging connected devices, such as laptops or phones.
Connecting to a computer
1Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a computer.
In this connection, you can use the microphone of the monitor.
2Connect other cables such as power cables for the monitor and computer and then power
on the monitor and computer. If the monitor screen is turned on, it indicates that the
connection is successful.
Connecting to a phone/tablet
1Connect one end of a USB-C to USB-C cable to the USB-C port on the monitor and the
other end to the USB-C port on a phone/tablet.
2Connect the monitor to a power supply and press the 5-way directional button upward to
power on the monitor. The screen of the phone/tablet will then be projected on the
monitor. When you perform operations on the phone/tablet, its screen will be
synchronously displayed on the monitor, allowing for a large-screen browsing experience.
Connecting the monitor to a device such as a computer
10
Setting the OSD menu
After the monitor is connected to a device such as a computer and is turned on, the system
will automatically congure and optimize the monitor settings.
You can open the OSD menu to change the settings while facing the screen:
1Press the 5-way directional button upward to open the OSD menu.
2On the OSD menu screen, operate the 5-way directional button as instructed to change
the settings:
Press the button forward, backward, leftward, and rightward to switch between
options.
Press the button leftward to return to the upper-level menu or exit the OSD menu.
Press the button upward or rightward to conrm the settings.
OSD menu descriptions
The OSD menu varies depending on the monitor model.
Level-1 Menu Level-2 Menu Description
11
GamingVision
Game assist In the Game scenario, you can congure the
following auxiliary settings:
Dark eld control: The gamma curve of the
monitor can be adjusted to enhance the dark hue in
images so that dark scenes and objects can be easily
identied.
Refresh rate: The refresh rate will be displayed after
this feature is enabled.
Crosshairs: Crosshairs will be displayed on the
screen after this feature is enabled.
Picture mode You can select an appropriate picture mode as
required. We recommend you to:
Select Scenery when browsing landscape images.
Select Movie when watching movies.
Select SRGB when browsing images on your
computer.
Select RTS when playing real-time strategy games.
Select FPS when playing rst-person shooting
games.
Select MOBA when playing Multiplayer Online
Battle Arena games.
Select Custom if you want to adjust more items.
Select P3 when browsing P3 images.
Lighting eects You can set the SoundBar light eect to Static or
Breathing, and adjust the color and speed of the
light eect.
Color
Brightness The value ranges from 0 to 100.
Contrast The value ranges from 0 to 100.
Color
temperature
You can set it to Standard, Cool, or Warm.
Alternatively, you can set Red, Green, and Blue to
values ranging from 0 to 100 in Custom.
Low blue light You can enable or disable this feature.
When you are reading for a long time, we
recommend that you enable this feature to
avoid eye fatigue. Once it is enabled, the screen
will take on a mild yellow tint.
Setting the OSD menu
12
Picture
OD This feature uses the driver acceleration technology
to shorten the response time. The value ranges from
0 to 4. A higher value indicates a faster response.
Scaling You can set it to Full screen, Scaled, or Original
size.
Input source
HDMI-1 Select the corresponding input source based on the
cable connecting the monitor and other devices.
HDMI-2
USB-C
DP
System settings
Volume You can set the speaker volume to a value ranging
from 0 to 100.
Sound mode Select an appropriate sound mode based on the
application scenario.
This feature only takes eect for the built-in
speaker of the monitor. When an external
device such as a headset is connected to the
monitor, the sound mode cannot be changed.
Microphone You can mute or unmute the microphone.
Language You can set the language of the OSD menu to
simplied Chinese, American English, Japanese, or
other languages.
Transparency You can set the transparency of the OSD menu to a
value ranging from 0 to 100.
Menu timeout You can set how long the OSD menu is displayed to
a value ranging from 10 to 100.
Setting the OSD menu
13
Shortcuts Press the up, down, left, and right shortcuts when
facing the screen, which correspond to pressing the
5-way directional button backward, forward,
leftward, and rightward, respectively.
When you press the 5-way directional button in any
of the four directions, you can quickly access the
setting menu of a specied feature to congure
settings.
For example, you can set the up shortcut to Input
source, the down shortcut to Lighting eects, the
left shortcut to Low blue light, and the right
shortcut to Game assist.
Button lock This feature is disabled by default. When it is
disabled, you can press the 5-way directional button
to set the monitor.
When it is enabled, the 5-way directional button is
locked. To unlock the button, face the screen when
the monitor is powered on and the OSD menu is
not displayed, and then press the 5-way directional
button when facing the screen until a message is
displayed.
Information You can view information such as the device model.
Reset You can restore the OSD menu to its factory
settings.
Setting the OSD menu
14
Safety information
This section contains important information about the operation of your device. It also
contains information about how to use the device safely. Read this information carefully
before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing so
causes danger or interference with other electronic devices.
Interference with medical equipment
•Follow rules and regulations set forth by hospitals and health care facilities. Do not use
your device where prohibited.
•Some wireless devices may aect the performance of hearing aids or pacemakers. Consult
your service provider for more information.
•Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained
between a device and a pacemaker to prevent potential interference with the pacemaker. If
using a pacemaker, hold the device on the side opposite the pacemaker and do not carry
the device in your front pocket.
•Please consult your doctor and the device manufacturer to determine if using your device
may interfere with the operation of your medical device.
Protecting your hearing when using a headset
• To prevent possible hearing damage, do not listen at high volume levels for long
periods.
•Using a headset at high volumes may damage your hearing. To reduce this risk, lower the
headset volume to a safe and comfortable level.
Areas with ammables and explosives
•Do not use the device where ammables or explosives are stored (in a gas station, oil
depot, or chemical plant, for example). Using your device in these environments increases
the risk of explosion or re. In addition, follow the instructions indicated in text or symbols.
•Do not store or transport the device in containers with ammable liquids, gases, or
explosives.
Operating environment
•Avoid dusty, damp, or dirty environments. Avoid magnetic elds. Using the device in these
environments may result in circuit malfunctions.
•Before connecting and disconnecting cables, stop using the device and disconnect it from
the power supply. Ensure that your hands are dry during operation.
15
•During thunderstorms, power o your device and remove all cables connected to it to
protect against lightning strikes.
•Do not use your device during thunderstorms to protect your device against any danger
caused by lightning.
•Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -10 °C to
+45 °C. Extreme heat or cold may damage your device or accessories.
•To protect your device or accessories from re or electrical shock hazards, avoid rain and
moisture.
•Keep the device away from sources of heat and re, such as a heater, microwave oven,
stove, water heater, radiator, or candle.
•Stop using your device or applications for a while if the device is overheated. If skin is
exposed to an overheated device for an extended period, low temperature burn symptoms,
such as red spots and darker pigmentation, may occur.
•Do not allow children or pets to bite or suck the device or accessories. Doing so may result
in damage or explosion.
•Observe local laws and regulations, and respect the privacy and legal rights of others.
•Do not place any object, such as a candle or a water container, on the device. If any foreign
object or liquid enters the device, immediately stop using it, power it o, and remove all
cables connected to it. Then, contact a Huawei authorized service center.
•Place this device in a place where it can be kept stable at all times. Otherwise, the device
may fall over and may cause serious personal injury or death.
Child's safety
•Comply with all precautions with regard to child's safety. Letting children play with the
device or its accessories may be dangerous. The device includes detachable parts that may
present a choking hazard. Keep away from children.
•The device and its accessories are not intended for use by children. Children should only use
the device with adult supervision.
Accessories
•Using an unapproved or incompatible power adapter, charger or battery may cause re,
explosion or other hazards.
•Choose only accessories approved for use with this model by the device manufacturer. The
use of any other types of accessories may void the warranty, may violate local regulations
and laws, and may be dangerous. Please contact your retailer for information about the
availability of approved accessories in your area.
Power adapter safety
•The power plug is intended to serve as a disconnect device.
•For pluggable devices, the socket-outlet shall be installed near the devices and shall be
easily accessible.
Safety information
16
•Unplug the power adapter from electrical outlets and the device when not in use.
•If the power cable is damaged (for example, the cord is exposed or broken), or the plug
loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or
re.
•Do not touch the power cord with wet hands or pull the power cord to disconnect the
power adapter.
•Do not touch the device or the power adapter with wet hands. Doing so may lead to short
circuits, malfunctions, or electric shocks.
•Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/
EN60950-1/UL60950-1 and has been tested and approved according to national or local
standards.
Cleaning and maintenance
•Keep the device and accessories dry. Do not attempt to dry it with an external heat source,
such as a microwave oven or hair dryer.
•Do not expose your device or accessories to extreme heat or cold. These environments may
interfere with proper function and may lead to re or explosion.
•Avoid collision, which may lead to device malfunctions, overheating, re, or explosion.
•Before you clean or maintain the device, stop using it, stop all applications, and disconnect
all cables connected to it.
•Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and
benzene) to clean the device or accessories. These substances may cause damage to parts
or present a re hazard. Use a clean, soft, and dry cloth to clean the device and accessories.
•Do not dismantle or remanufacture the device and its accessories. This voids the warranty
and releases the manufacturer from liability for damage. In case of damage, contact a
Huawei authorized service center for assistance or repair.
•If the device screen is broken in a collision, immediately stop using the device. Do not touch
or attempt to remove the broken parts. Promptly contact a Huawei authorized service
center.
Disposal and recycling information
The symbol on the product, battery, literature, or packaging means that the products and
batteries should be taken to separate waste collection points designated by local authorities
at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner
that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste
disposal service or visit the website https://consumer.huawei.com/en/.
Safety information
17
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction
of the use of certain hazardous substances in electrical and electronic equipment, such as EU
REACH regulation, RoHS and Batteries (where included) directive. For declarations of
conformity about REACH and RoHS, please visit the website
https://consumer.huawei.com/certication.
Safety information
18
Legal Notice
Copyright © Huawei 2021. All rights reserved.
The product described in this manual may include copyrighted software of Huawei and
possible licensors. Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the
said software, unless such restrictions are prohibited by applicable laws or such actions are
approved by respective copyright holders.
Trademarks and Permissions
The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
Other trademarks, product, service and company names mentioned may be the property of
their respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and therefore may not be activated or may
be limited by local network operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which you
purchase.
Huawei reserves the right to change or modify any information or specications contained in
this manual without prior notice and without any liability.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR
LOSS OF PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED
SAVINGS REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR
PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF
HUAWEI ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL
BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
19
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be
responsible to obtain all necessary governmental permits and licenses in order to export, re-
export or import the product mentioned in this manual including the software and technical
data therein.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy
at https://consumer.huawei.com/privacy-policy.
For More Help
Visit https://consumer.huawei.com/en/support for the most up-to-date contact information
for your country or region.
ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE, INCLUDING BUT NOT LIMITED TO THE
DEVICE COLOR, SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE
ACTUAL DEVICE MAY VARY. NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED.
Legal Notice
20