About This Document
Contents
1 Safety Precautions
2 Overview
3 Storage
4 Installation
5 Electrical Connections
6 Commissioning
7 Maintenance
- 7.1 Routine Maintenance
- 7.2 Troubleshooting
8 Handling the Inverter
9 Technical Data
A Grid Codes
B Setting Dry Contact Scheduling Parameters
C Setting Export Limitation Parameters
D Setting Voltage Rise Suppression Q-U Curve
E Starting AFCI Check
F IPS Test (for Italy CEI0-21 Grid Code only)
G DRM Configuration Guide for Standard AS NZS4777.2
H Acronyms and Abbreviations

Huawei SUN2000-4KTL-M0 User Manual

Displayed below is the user manual for SUN2000-4KTL-M0 by Huawei which is a product in the Power Adapters & Inverters category. This manual has pages.

Related Manuals

Huawei Huawei P Smart Manual

Huawei WS322 Manual

Huawei P7 Manual

Huawei WS880 Manual

Huawei Lite Manual

Huawei FusionServer X6800 Manual

Huawei AP4030DN Manual

Huawei P8 Max Manual

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

Issue

Date

2019-07-19

HUAWEI TECHNOLOGIES CO., LTD.

Issue 03 (2019-07-19)

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

http://e.huawei.com

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

About This Document

Issue 03 (2019-07-19)

About This Document

Purpose

This document describes the SUN2000-8KTL-M0, SUN2000-10KTL-M0, SUN2000-12KTL-

M0, SUN2000-15KTL-M0, SUN2000-17KTL-M0, and SUN2000-20KTL-M0 (SUN2000 for

short) in terms of installation, electrical connections, commissioning, maintenance, and

troubleshooting. Read this document through, understand the safety information, and get

familiar with the functions and features of the SUN2000 before installing and operating it.

The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable only to Australia.

Intended Audience

This document is intended for:

 Installers

 Users

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation

which, if not avoided, will result in serious injury

or death.

Indicates a potentially hazardous situation which,

if not avoided, could result in serious injury or

death.

Indicates a potentially hazardous situation which,

if not avoided, may result in minor or moderate

injury.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

About This Document

Issue 03 (2019-07-19)

iii

Symbol

Description

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,

data loss, performance deterioration, or

unanticipated results.

NOTICE is used to address practices not related to

personal injury.

Calls attention to important information, best

practices and tips.

NOTE is used to address information not related

to personal injury, equipment damage, or

environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all

updates made in previous issues.

Issue 03 (2019-07-19)

 Added E Starting AFCI Check.

 Added F IPS Test (for Italy CEI0-21 Grid Code only).

 Added SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable only to

Australia.

Issue 02 (2019-06-30)

 Added C Setting Export Limitation Parameters.

 Added D Setting Voltage Rise Suppression Q-U Curve.

Issue 01 (2019-05-08)

This issue is used for first office application (FOA).

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

Contents

Issue 03 (2019-07-19)

Contents

About This Document .................................................................................................................... ii

1 Safety Precautions ......................................................................................................................... 1

2 Overview ......................................................................................................................................... 4

2.1 Product Introduction ..................................................................................................................................................... 4

2.2 Appearance ................................................................................................................................................................... 7

2.3 Label Description .......................................................................................................................................................... 9

2.3.1 Enclosure Labels ........................................................................................................................................................ 9

2.3.2 Product Nameplate ................................................................................................................................................... 10

2.4 Working Principles...................................................................................................................................................... 11

2.4.1 Circuit Diagram ....................................................................................................................................................... 11

2.4.2 Working Modes ........................................................................................................................................................ 11

3 Storage ........................................................................................................................................... 14

4 Installation.................................................................................................................................... 15

4.1 Checking Before Installation ...................................................................................................................................... 15

4.2 Tools ........................................................................................................................................................................... 15

4.3 Determining the Installation Position ......................................................................................................................... 17

4.3.1 Environment Requirements ..................................................................................................................................... 17

4.3.2 Space Requirements ................................................................................................................................................. 17

4.4 Moving an Inverter ..................................................................................................................................................... 21

4.5 Installing the Mounting Bracket ................................................................................................................................. 22

4.5.1 Wall-mounted Installation ........................................................................................................................................ 23

4.5.2 Support-mounted Installation .................................................................................................................................. 25

5 Electrical Connections ................................................................................................................ 29

5.1 Preparing for Installation ............................................................................................................................................ 30

5.2 Connecting the PE cable ............................................................................................................................................. 33

5.3 Connecting the AC Output Power Cable .................................................................................................................... 35

5.4 Connecting the DC input power cable ........................................................................................................................ 39

5.5 (Optional) Installing the Smart Dongle ....................................................................................................................... 44

5.6 (Optional) Installing the Signal Cable ........................................................................................................................ 44

5.6.1 Connecting the RS485 Communications Cable (Inverter Cascading) ..................................................................... 47

5.6.2 Connecting the RS485 Communications Cable (Smart Power Sensor) ................................................................... 48

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

Contents

Issue 03 (2019-07-19)

5.6.3 Connecting the Power Grid Scheduling Signal Cable ............................................................................................. 50

6 Commissioning............................................................................................................................ 53

6.1 Check Before Power-On ............................................................................................................................................. 53

6.2 Powering On the System............................................................................................................................................. 54

6.3 Commissioning ........................................................................................................................................................... 55

6.3.1 Scenario 1: Single inverter + Smart Dongle ............................................................................................................ 55

6.3.2 Scenario 2: Multiple Inverters + SmartLogger1000A ............................................................................................. 58

6.3.3 Other Scenarios ........................................................................................................................................................ 58

6.4 Powering Off the System ............................................................................................................................................ 61

7 Maintenance ................................................................................................................................. 62

7.1 Routine Maintenance .................................................................................................................................................. 62

7.2 Troubleshooting .......................................................................................................................................................... 63

8 Handling the Inverter ................................................................................................................. 70

8.1 Removing the SUN2000 ............................................................................................................................................. 70

8.2 Packing the SUN2000 ................................................................................................................................................. 70

8.3 Disposing of the SUN2000 ......................................................................................................................................... 70

9 Technical Data ............................................................................................................................. 71

A Grid Codes................................................................................................................................... 76

B Setting Dry Contact Scheduling Parameters ......................................................................... 80

C Setting Export Limitation Parameters .................................................................................... 82

D Setting Voltage Rise Suppression Q-U Curve ..................................................................... 85

E Starting AFCI Check .................................................................................................................. 87

F IPS Test (for Italy CEI0-21 Grid Code only) .......................................................................... 88

G DRM Configuration Guide for Standard AS NZS4777.2................................................... 91

H Acronyms and Abbreviations.................................................................................................. 92

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

1 Safety Precautions

Issue 03 (2019-07-19)

1 Safety Precautions

Safety

 Before performing operations, read through this manual and follow all the precautions to

prevent accidents. The DANGER, WARNING, CAUTION, and NOTICE statements in

this document do not represent all the safety instructions. They are only supplements to the

safety instructions.

 Only certified electricians are allowed to install, connect cables for, commission, maintain,

and troubleshoot Huawei products, and they must understand basic safety precautions to

avoid hazards.

When operating Huawei equipment, in addition to following the general precautions in this

document, follow the specific safety instructions given by Huawei. Huawei will not be liable

for any consequence caused by the violation of the safety operation regulations and design,

production, and usage standards.

Disclaimer

Huawei shall not be liable for any consequence caused by any of the following events:

 Damage during the transportation by the customer

 Storage conditions that do not meet the requirements specified in this document.

 Incorrect storage, installation, or use

 Installation or use by unqualified personnel

 Failure to follow the operation instructions and safety precautions in this document

 Operation in extreme environments which are not covered in this document

 Operation beyond specified ranges.

 Unauthorized modifications to the product or software code or removal of the product

 Device damage due to force majeure (such as earthquake, fire, and storm)

 Warranty expiration without extension of warranty service.

 Installation or use in environments which are not specified in relevant international

standards

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

1 Safety Precautions

Issue 03 (2019-07-19)

Personnel Requirements

 Operation personnel should receive professional training.

 Operation personnel should read through this document and follow all the precautions.

 Operation personnel should be familiar with the safety standards relevant to electrical

systems.

 Operation personnel should understand the composition and working principles of the

grid-tied PV system and be aware of local regulations.

 Operation personnel must wear proper personal protective equipment (PPE).

Protecting Labels

Do not scrawl, damage, or block any warning label on the device.

Installation

Never power on the SUN2000 during installation.

 Ensure that the SUN2000 is not connected to a power supply or powered on before

finishing installation.

 Ensure that the SUN2000 is installed in a well-ventilated environment.

 Ensure that the SUN2000 heat sinks are free from blockage.

 Do not open the front panel of the SUN2000.

 Do not remove the terminals and ports at the bottom of the SUN2000.

Grounding

 When installing the device, always make the ground connection first and disconnect it in

the end.

 Do not damage the ground conductor.

Electrical Connections

Before connecting cables, ensure that the SUN2000 is secured in position and not damaged in

any way. Otherwise, electric shock or fire may occur.

 Ensure that all electrical connections comply with local electrical standards.

 Obtain approval from the local utility company before using the SUN2000 to generate

electricity in grid-tied mode.

 Ensure that the cables used in a grid-tied PV system are properly connected and insulated

and meet all specification requirements.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

1 Safety Precautions

Issue 03 (2019-07-19)

Operation

High voltage may cause an electric shock, which results in serious property damage, serious

injury, or death from the SUN2000 in operation. Strictly comply with the safety precautions in

this document and associated documents when operating the SUN2000.

 Before operating a device, ensure that it is properly grounded.

 Do not touch an energized SUN2000 because the heat sink reaches a high temperature.

 Follow local laws and regulations when operating the equipment.

Commissioning

When the SUN2000 is powered on for the first time, only qualified personnel are allowed to

set the parameters on Quick Setting. Incorrect settings may cause the SUN2000 to conflict

with the local certification, which affects the normal operation of the SUN2000.

Maintenance and Replacement

High voltage may cause an electric shock, which results in serious property damage, serious

injury, or death, or serious property damage from the SUN2000 in operation. Prior to

maintenance, power off the SUN2000 and strictly comply with the safety precautions in this

document and associated documents when operating the SUN2000.

 A faulty SUN2000 requires overall maintenance. Contact your dealer if the SUN2000 is

faulty.

 Maintain the SUN2000 with sufficient knowledge of this document, proper tools, and

testing equipment.

 Before maintaining the SUN2000, power it off and follow the instructions on the delay

discharge label. Wait for a proper time to operate the SUN2000.

 Place temporary warning signs or erect fences to prevent unauthorized access to the

maintenance site.

 Rectify any fault that may compromise the SUN2000 security performance before

powering it on again.

 Observe ESD precautions during maintenance.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

2 Overview

2.1 Product Introduction

Function

The SUN2000 is a three-phase grid-tied PV string inverter that converts the DC power

generated by PV strings into AC power and feeds the power into the power grid.

Models

This document involves the following product models:

 SUN2000-8KTL-M0

 SUN2000-10KTL-M0

 SUN2000-12KTL-M0

 SUN2000-15KTL-M0

 SUN2000-17KTL-M0

 SUN2000-20KTL-M0

The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable only to Australia.

Figure 2-1 Model description (SUN2000-20KTL-M0 is used as an example)

Table 2-1 Model description

Icon

Meaning

Description

Product

SUN2000: three-phase grid-tied PV string inverter

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Icon

Meaning

Description

Power level

 8K: The rated power is 8 kW.

 10K: The rated power is 10 kW.

 12K: The rated power is 12 kW.

 15K: The rated power is 15 kW.

 17K: The rated power is 17 kW.

 20K: The rated power is 20 kW.

Topology

TL: transformerless

Product code

M0: the product series with the 1100 V DC input

voltage

Network Application

The SUN2000 applies to grid-tied PV systems for residential rooftops and small ground

plants. Typically, a grid-tied system consists of the PV string, SUN2000, AC switch, and

alternating current distribution unit (ACDU).

Figure 2-2 Networking application (optional in dashed boxes)

 indicates a power cable, indicates a signal cable, indicates wireless

communication.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

 If the inverter is connected to the FusionSolar app over its built-in WiFi network, only local

commissioning can be performed.

(A) PV string

(B) DC switch

(D) AC switch

(E) ACDU

(F) Smart Power Sensor

(G) Power grid

(H) 4G Smart Dongle

(I) WLAN Smart Dongle

(J) Router

(K) FusionSolar

management system

(L) FusionSolar APP

(M) Load

(N) Ripple Control Device

Supported Power Grids

Power grid types supported by the SUN2000 include TN-S, TN-C, TN-C-S, TT, and IT.

Figure 2-3 Supported power grids

 In a TT power grid, the N-PE voltage should be lower than 30 V.

 In an IT power grid, you need to set isolation settings to input not grounded, with a transformer.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

2.2 Appearance

Figure 2-4 Appearance

(1) LED indicator

(2) Front panel

(3) Mounting plate

(4) Heat sink

(5) Ventilation valve

(6) Ground screw

(7) AC output port (AC)

(8) Communication port (COM)

(9) Smart Dongle port (GPRS/4G/WLAN)

(10) DC input terminals (PV4+/PV4–)

(11) DC input terminals (PV3+/PV3–)

(12) DC input terminals (PV2+/PV2–)

(13) DC input terminals (PV1+/PV1–)

(14) DC switch (DC SWITCH)

Two M6 screw holes are reserved on the sides of the enclosure for installing an awning.

Table 2-2 LED indicator description

Category

Status

Meaning

Running

indication

LED1

LED2

N/A

Steady green

The SUN2000 is operating in grid-

tied mode.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Category

Status

Meaning

Blinking

green at long

intervals (on

for 1s and

then off for

1s)

Off

The DC is on and the AC is off.

Blinking

green at long

intervals (on

for 1s and

then off for

1s)

Blinking green at

long intervals (on

for 1s and then off

for 1s)

The DC is on, the AC is on, and the

SUN2000 is not exporting power to

the power grid.

Off

The DC is off.a

Blinking red

at short

intervals (on

for 0.2s and

then off for

0.2s)

N/A

DC environmental alarm

N/A

Blinking red at

short intervals (on

for 0.2s and then

off for 0.2s)

AC environmental alarm

Steady red

Fault

Communicatio

n indication

LED3

N/A

Blinking green at short intervals

(on for 0.2s and then off for 0.2s)

Communication is in progress.

(When a mobile phone is connected

to the SUN2000, the indicator first

indicates that the phone is

connected to the SUN2000): blinks

green at long intervals.)

Blinking green at long intervals

(on for 1s and then off for 1s)

The mobile phone is connected to

the SUN2000.

Off

There is no communication.

Note a: The AC may be on. Check whether the external AC switch is OFF.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

2.3 Label Description

2.3.1 Enclosure Labels

Symbol

Name

Meaning

Delayed discharge

Residual voltage exists

after the SUN2000 is

powered off. It takes 5

minutes for the SUN2000

to discharge to the safe

voltage.

Burn warning

Do not touch an operating

SUN2000 because it

generates high

temperatures on the shell.

Electric shock warning

label

 High voltage exists

after the SUN2000 is

powered on. Only

qualified and trained

electrical technicians

are allowed to perform

operations on the

SUN2000.

 High touch current

exists after the

SUN2000 is powered

on. Ensure that the

SUN2000 has been

grounded before

powering on it.

Refer to documentation

Reminds operators to

refer to the documents

shipped with the

SUN2000.

Grounding

Indicates the position for

connecting the protective

earthing (PE) cable.

Operation warning

Do not remove the DC

input connector or the AC

output connector when the

SUN2000 is running.

SUN2000 serial number

(SN) label

Indicates the SUN2000

SN.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Symbol

Name

Meaning

SUN2000 MAC address

label

Indicates the MAC

address.

QR code label for

SUN2000 WiFi

connection

Scan the QR code to

connect to Huawei

SUN2000 WiFi network.

2.3.2 Product Nameplate

Figure 2-5 Nameplate (SUN2000-20KTL-M0 as an example)

(1) Trademark and product model

(2) Important technical specifications

(3) Compliance symbols

(4) Company name and country of manufacture

The nameplate figure is for reference only.

Symbol

Name

Meaning

Australia RCM

certification mark

This product complies

with Australia RCM

certification standards.

Conformité Européenne

(CE) certification mark

This product complies

with CE certification

standards.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Symbol

Name

Meaning

Environmentally friendly

use period (EFUP) mark

The product does not

pollute the environment

during the specified

period.

EU waste electrical and

electronic equipment

(WEEE) mark

Do not dispose of the

product as household

garbage.

2.4 Working Principles

2.4.1 Circuit Diagram

Four PV strings connect to the SUN2000, and their maximum power points are tracked by

two maximum power point tracking (MPPT) circuits. The SUN2000 converts DC power into

three-phase AC power through an inverter circuit. Surge protection is supported on both the

DC and AC sides.

Figure 2-6 SUN2000 conceptual diagram

2.4.2 Working Modes

The SUN2000 can work in Standby, Operating, or Shutdown mode.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Figure 2-7 Working modes

Table 2-3 Working mode description

Working

Mode

Description

Standby

The SUN2000 enters Standby mode when the external environment does not

meet the operating requirements. In Standby mode:

 The SUN2000 continuously performs status check and enters the

Operating mode once the operating requirements are met.

 The SUN2000 enters Shutdown mode after detecting a shutdown

command or a fault after startup.

Operating

In Operating mode:

 The SUN2000 converts DC power from PV strings into AC power and

feeds the power to the power grid.

 The SUN2000 tracks the maximum power point to maximize the PV

string output.

 If the SUN2000 detects a fault or a shutdown command, it enters the

Shutdown mode.

 The SUN2000 enters Standby mode after detecting that the PV string

output power is not suitable for connecting to the power grid for

generating power.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

2 Overview

Issue 03 (2019-07-19)

Working

Mode

Description

Shutdown

 In Standby or Operating mode, the SUN2000 enters Shutdown mode

after detecting a fault or shutdown command.

 In Shutdown mode, the SUN2000 enters Standby mode after detecting a

startup command or that the fault is rectified.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

3 Storage

Issue 03 (2019-07-19)

3 Storage

The following requirements should be met if the SUN2000 is not put into use directly:

 Do not unpack the SUN2000.

 Keep the storage temperature at –40°C to +70°C and the humidity at 5%–95% RH (non-

condensing).

 The SUN2000 should be stored in a clean and dry place and be protected from dust and

water vapor corrosion.

 A maximum of six SUN2000s can be stacked. To avoid personal injury or device

damage, stack SUN2000s with caution to prevent them from falling over.

 Periodic inspections are required during the storage. Replace the packing materials if

necessary.

 If the SUN2000 has been long-term stored, inspections and tests should be conducted by

qualified personnel before it is put into use.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

4 Installation

4.1 Checking Before Installation

Outer Packing Materials

Before unpacking the inverter, check the outer packing materials for damage, such as holes

and cracks, and check the inverter model. If any damage is found or the inverter model is not

what you requested, do not unpack the package and contact your supplier as soon as possible.

You are advised to remove the packing materials within 24 hours before installing the inverter.

Package Contents

After unpacking the inverter, check that the contents are intact and complete. If any damage is

found or any component is missing, contact your supplier.

For details about the number of contents, see the Packing List in the packing case.

4.2 Tools

Type

Tool

Installation

Tools

Hammer drill

Drill bit: Φ8

mm and Φ6

Socket wrench

set

Torque

screwdriver

Phillips head:

Diagonal pliers

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Type

Tool

Wire stripper

Removal

wrench

Model:

H4TW0001;

manufacturer:

Amphenol

Rubber mallet

Utility knife

Cable cutter

Crimping tool

Model:

H4TC0003;

manufacturer:

Amphenol

Multimeter

DC voltage

measurement

range ≥ 1100 V

Vacuum cleaner

Marker

Measuring tape

Bubble or

digital level

OT terminal

crimping tool

Heat shrink

tubing

Heat gun

Cable tie

N/A

PPE

Safety gloves

Safety goggles

Anti-dust

respirator

Safety shoes

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

4.3 Determining the Installation Position

4.3.1 Environment Requirements

Basic Requirements

 The SUN2000 is protected to IP65 and can be installed indoors or outdoors.

 Do not install the SUN2000 in a place where personnel are easy to come into contact

with its enclosure and heat sinks, because these parts are extremely hot during operation.

 Do not install the SUN2000 in areas with flammable or explosive materials.

 Do not install the SUN2000 at a place within children's reach.

 Do not install the SUN2000 outdoors in salt areas because it will be corroded there and

may cause fire. A salt area refers to the region within 500 meters from the coast or prone

to sea breeze. The regions prone to sea breeze vary depending on weather conditions

(such as typhoons and monsoons) or terrains (such as dams and hills).

 The SUN2000 must be installed in a well-ventilated environment to ensure good heat

dissipation.

 Recommended: Install the SUN2000 in a sheltered place or a place with an awning.

Mounting Structure Requirements

 The mounting structure where the SUN2000 is installed must be fireproof.

 Do not install the SUN2000 on flammable building materials.

 The SUN2000 is heavy. Ensure that the installation surface is solid enough to bear the

weight load.

 In residential areas, do not install the SUN2000 on drywalls or walls made of similar

materials which have a weak sound insulation performance because the noise generated

by the SUN2000 is noticeable.

4.3.2 Space Requirements

Installation Angle Requirements

The SUN2000 can be wall-mounted or pole-mounted. The installation angle requirements are

as follows:

 Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to facilitate heat

dissipation.

 Do not install the SUN2000 at forward tilted, excessive back tilted, side tilted,

horizontal, or upside down positions.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-1 Installation tilts

Installation Space Requirements

 Reserve enough space around the SUN2000 to ensure sufficient space for installation

and heat dissipation.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-2 Installation space

 When installing multiple SUN2000s, install them in horizontal mode if sufficient space

is available and install them in triangle mode if no sufficient space is available. Stacked

installation is not recommended.

Figure 4-3 Horizontal installation (recommended)

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-4 Staggered installation (recommended)

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-5 Stacked installation (not recommended)

4.4 Moving an Inverter

Procedure

Step 1 Two persons are required to move the inverter and one person on both sides. Lift the inverter

from the packing case and move it to the specified installation position.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

 To prevent personal injury and damage to the device, take care to keep your balance when

moving the SUN2000.

 Do not use the wiring terminals and ports at the bottom to support any weight of the

SUN2000.

 When you need to temporally place the SUN2000 on the ground, use foam, paper or other

protective materials to prevent damage to its enclosure.

Figure 4-6 Moving an inverter

----End

4.5 Installing the Mounting Bracket

Installation Precautions

Figure 4-7 shows the dimensions of installation holes on the SUN2000.

Figure 4-7 Mounting bracket dimensions

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

4.5.1 Wall-mounted Installation

Procedure

Step 1 Determine the installation positions for drilling holes, and mark the positions using a marker.

Step 2 Secure the mounting brackets.

 M6x60 expansion bolts are delivered with the SUN2000. If the length and amount of the bolts do not

meet installation requirements, prepare M6 stainless steel expansion bolts by yourself.

 The expansion bolts delivered with the inverter are used for solid concrete walls. For other types of

walls, prepare bolts by yourself and ensure that the wall meets the load bearing requirements of the

inverter.

Figure 4-8 Expansion bolt composition

(1) Bolt

(2) Nut

(3) Spring washer

(4) Flat washer

(5) Expansion tube

Avoid drilling holes in the utility pipes or cables attached to the back of the wall.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

 To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-dust

respirator when drilling holes.

 Clean up any dust in and around the holes using a vacuum cleaner and measure the

distance between holes. If large hole tolerance exists, position and drill holes again.

 After removing the bolt, spring washer, and flat washer, level the front of the expansion

tube with the concrete wall. Otherwise, the mounting brackets will not stay steady on the

concrete wall.

 Partially loosen the nut, flat washer and spring washer of the two expansion bolts below.

Figure 4-9 Installing the Mounting Bracket

Step 3 Install the SUN2000 onto the mounting bracket.

Step 4 Tighten nuts.

Figure 4-10 Installing the SUN2000

Step 5 (Optional) Install the anti-theft lock.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

 Prepare an anti-theft lock suitable for the lock hole diameter (Ф8 mm) by yourself.

 An outdoor waterproof lock is recommended.

 Keep the key to the anti-theft lock safe.

Figure 4-11 Installing the anti-theft lock

----End

4.5.2 Support-mounted Installation

Prerequisites

Prepare M6 stainless bolt assemblies (including flat washers, spring washers, and M6 bolts)

with appropriate lengths as well as matched flat washers and nuts based on the support

specifications.

Procedure

Step 1 Determine the hole positions based on the marking-off template, and then mark the hole

positions using a marker.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-12 Determining hole positions

Step 2 Drill holes using a hammer drill.

You are advised to apply anti-rust paint on the hole positions for protection.

Figure 4-13 Drilling holes

Step 3 Secure the mounting bracket.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

Figure 4-14 Securing the mounting bracket

Step 4 Install the SUN2000 onto the mounting bracket.

Step 5 Tighten the bolt assembly.

Figure 4-15 Installing the SUN2000

Step 6 (Optional) Install the anti-theft lock.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

4 Installation

Issue 03 (2019-07-19)

 Prepare an anti-theft lock suitable for the lock hole diameter (Ф8 mm) by yourself.

 An outdoor waterproof lock is recommended.

 Keep the key to the anti-theft lock safe.

Figure 4-16 Installing the anti-theft lock

----End

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

5 Electrical Connections

Precautions

Before connecting cables, ensure that the DC switch on the SUN2000 and all the switches

connecting to the SUN2000 are OFF. Otherwise, the high voltage of the SUN2000 may result

in electric shocks.

 The equipment damage caused by incorrect cable connections is beyond the warranty

scope.

 Only certified electricians are allowed to connect cables.

 Operation personnel must wear proper PPE when connecting cables.

The cable colors shown in the electrical connection diagrams provided in this chapter are for reference

only. Select cables in accordance with local cable specifications (green-and-yellow cables are only used

for PE).

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

5.1 Preparing for Installation

Figure 5-1 SUN2000 cable connections (optional in dashed boxes)

If the Smart Dongle is configured, you are advised to install the Smart Dongle before

connecting the signal cable.

Table 5-1 Component description

No.

Component

Description

Source

PV module

 A PV string is composed of the

PV modules connected in series.

 The SUN2000 supports the input

from four PV strings.

Prepared by the

customer

DC switch

Recommended: a PV circuit breaker

with a rated voltage greater than or

equal to 1,100 V DC and a rated

current of 15 A.

Prepared by the

customer

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

No.

Component

Description

Source

Smart Donglea

 WLAN Smart Dongle:

SDongleA-01.

 4G Smart Dongle: SDongleA-

03.

Purchased from

Huawei

SUN2000

Select a proper model based on

requirements.

Purchased from

Huawei

SmartLogger10

00A

Select a proper model based on

requirements.

Purchased from

Huawei

Smart Power

Sensor

The recommended electricity meter

model is DTSU666-H.

Purchased from

Huawei

Ripple Control

Device

Select the devices that meet the

power grid scheduling

requirements.

Provided by local

power grid

companies

AC switchb

Recommended: a three-phase AC

circuit breaker with a rated voltage

greater than or equal to 415 V AC

and a rated current of:

 25 A (SUN2000-8KTL-M0,

SUN2000-10KTL-M0,

SUN2000-12KTL-M0)

 40 A (SUN2000-15KTL-M0,

SUN2000-17KTL-M0,

SUN2000-20KTL-M0)

Prepared by the

customer

 Note a: WLAN Smart Dongle: For details about the SDongleA-01 operation, see

SDongleA-01 Quick Guide (WLAN); 4G Smart Dongle: For details about the SDongleA-

03 operation, see SDongleA-03 Quick Guide (4G). You can obtain the quick guide at

https://support.huawei.com/enterprise by searching for the Smart Dongle model.

 Note b：The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable

only to Australia.

Table 5-2 Cable description

No.

Name

Type

Specifications

DC input power cable

Standard PV cable in the

industry

 Conductor cross-

sectional area: 4–6

mm2

 Cable outer diameter:

4.5–7.8 mm

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

No.

Name

Type

Specifications

(Optional) RS485

communications cable

(used to cascade inverters

or connect to the RS485

signal port on the

SmartLogger)

Two-core outdoor

shielded twisted pair

cable

 Conductor cross-

sectional area: 0.2–1

mm2

 Cable outer diameter:

4–11 mm

(Optional) RS485

communications cable

(used to connect to the

RS485 signal port on a

Smart Power Sensor for

export limitation)

Two-core outdoor

shielded twisted pair

cable

 Conductor cross-

sectional area: 0.2–1

mm2

 Cable outer diameter:

4–11 mm

(Optional) Grid

scheduling signal cable

Five-core outdoor cable

 Conductor cross-

sectional area: 0.2–1

mm2

 Cable outer diameter:

4–11 mm

AC output power cable

Outdoor copper cablea

SUN2000-8KTL-M0,

SUN2000-10KTL-M0,

SUN2000-12KTL-M0:

 Conductor cross-

sectional area: 6–16

mm2

 Cable outer diameter:

11–26 mm

SUN2000-15KTL-M0,

SUN2000-17KTL-M0,

SUN2000-20KTL-M0:

 Conductor cross-

sectional area: 10–16

mm2

 Cable outer diameter:

11–26 mm

PE cable

Single-core outdoor

copper cableb

SUN2000-8KTL-M0,

SUN2000-10KTL-M0,

SUN2000-12KTL-M0:

Conductor cross-sectional

area ≥ 6 mm2

SUN2000-15KTL-M0,

SUN2000-17KTL-M0,

SUN2000-20KTL-M0:

Conductor cross-sectional

area ≥ 10 mm2

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

No.

Name

Type

Specifications

 Note a：The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable

only to Australia.

 Note b：The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable

only to Australia.

5.2 Connecting the PE cable

Precautions

 Ensure that the PE cable is properly connected. If it is disconnected or loose, electric

shocks may occur.

 Do not connect the neutral wire to the enclosure as a PE cable. Otherwise, electric shocks

may occur.

 The PE point at the AC output port is used only as a PE equipotential point, and cannot substitute for

the PE point on the enclosure.

 After the ground cable is installed, it is recommended that the silica gel or paint be applied to the

ground terminal for protection.

Additional Information

The SUN2000 has the grounding detection function. This function detects whether the

SUN2000 is grounded properly before its startup, or whether the ground cable is disconnected

when the SUN2000 is running. This function works under limited conditions. To ensure the

safe operation of the SUN2000, ground the SUN2000 properly according to the connection

requirements of the PGND cable. For some power grid types, if the output side of the inverter

is connected to an isolation transformer, ensure that the inverter is properly grounded and set

isolation settings to Input not grounded, with a transformer to enable the inverter to run

properly.

 According to IEC62109, to ensure safe application in case of the ground cable is

damaged or disconnected, connect the PE cable properly before the grounding detection

function is disabled. Ensure that the PE cable meets at least one of the following

requirements.

− The PE cable is a single-core outdoor copper cable with a conductor cross-sectional

area of at least 10 mm 2.

− Use cables that have the same diameter as the AC output cable, and ground the PE

terminal on the AC connector and the ground screw on the enclosure respectively.

 In some countries and regions, additional ground cables are required for the SUN2000.

In this case, use cables that have the same diameter as the AC output cable, and ground

the PE terminal on the AC connector and the ground screw on the enclosure respectively.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Procedure

Step 1 Crimp the OT terminal.

 Pay attention not to damage the core wire when stripping a cable.

 The cavity formed after crimping the conductor strip of the OT terminal needs to wrap the

core wire completely. The core wire needs to contact the OT terminal closely.

 Wrap the wire crimping area with the heat shrink tubing or the PVC insulation tape. The

following figure uses the heat shrink tubing as an example.

 When using the heat gun, protect devices from being scorched.

Figure 5-2 Crimping an OT terminal

(1) Cable

(2) Core wire

(3) Heat shrink tubing

(4) OT terminal

(5) Crimping tool

(6) Heat gun

Step 2 Connect the PE cable.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-3 Connecting the PE cable

----End

5.3 Connecting the AC Output Power Cable

Precautions

A three-phase AC switch needs to be installed on the AC side of the SUN2000. To ensure that

the SUN2000 can safely disconnect itself from the power grid when an exception occurs,

select a proper overcurrent protection device in compliance with local power distribution

regulations.

Do not connect loads between the SUN2000 and the AC switch directly connected to it.

The SUN2000 is integrated with a comprehensive residual current monitoring unit. Once

detecting that the residual current exceeds the threshold, the SUN2000 immediately

disconnects itself from the power grid.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

 If the external AC switch can perform earth leakage protection, the rated leakage action

current should be greater than or equal to 100 mA.

 If multiple SUN2000s connect to the general residual current device (RCD) through their

respective external AC switches, the rated leakage action current of the general RCD

should be greater than or equal to the number of SUN2000s multiplied by 100 mA.

 A knife switch cannot be used as an AC switch.

 The hex key is delivered with the inverter and bound to the hanging kit at the bottom of

the inverter.

Figure 5-4 Hex key

Procedure

Step 1 Connect the AC output power cable to the AC connector.

Figure 5-5 Stripping requirements

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

 Ensure that the cable jacket is inside the connector.

 Ensure that the exposed core wire is totally inserted into the cable hole.

 Ensure that AC terminations provide firm and solid electrical connections. Failing to do so

may cause SUN2000 malfunction and damage to its AC connectors.

 Ensure that the cable is not twisted.

Figure 5-6 Three-core cable (L1, L2, and L3)

Figure 5-7 Four-core cable (L1, L2, L3, and PE)

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-8 Four-core cable (L1, L2, L3, and N)

Figure 5-9 Five-core cable (L1, L2, L3, N, and PE)

The cable colors shown in the figures are for reference only. Select an appropriate cable according to

local standards.

Step 2 Connect the AC connector to the AC output port.

Ensure that the AC connector is connected securely.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-10 Securing the AC connector

Step 3 Check the route of the AC output power cable.

Figure 5-11 Cable route

----End

Disconnection

Disconnection can be performed in reverse order.

5.4 Connecting the DC input power cable

Precautions

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

 Before connecting the DC input power cable, ensure that the DC voltage is within the safe

range (lower than 60 V DC), and that the DC SWITCH is set to the OFF position. Failure

to do so could generate high voltage, which may cause electric shocks.

 When the SUN2000 is operating, it is not allowed to operate the DC input power cable,

such as connecting or disconnecting a PV string or a PV module in a PV string. Failing to

do so may cause electric shocks.

 If no PV string is connected to a DC input terminal of the SUN2000, do not remove the

watertight cap from the terminal. Otherwise, the IP rating of the SUN2000 will be

affected.

Ensure that the following conditions are met. Otherwise, the SUN2000 may be damaged, or

even a fire could happen.

 PV modules connected in series in each PV string are of the same specifications.

 The open-circuit voltage of each PV string is always lower than or equal to 1080 V DC.

 The maximum short-circuit current of each PV string must be lower than or equal to 15 A.

 The DC input power cable is correctly connected. The positive and negative terminals of a

PV module are connected to corresponding positive and negative DC input terminals of

the SUN2000.

 If the DC input power cable is reversely connected, do not operate the DC switch and

positive and negative connectors. Wait until the solar irradiance declines at night and the

PV string current reduces to below 0.5 A, and then turn off the DC switch. Remove the

positive and negative connectors to correct the polarity.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

 Because the output of the PV string connected to the SUN2000 cannot be grounded,

ensure that the PV module output is insulated to ground.

 The PV strings connecting to the same MPPT circuit should contain PV modules of the

same model and quantity.

 During the installation of PV strings and the SUN2000, the positive or negative terminals

of PV strings may be short-circuited to ground if power cables are not properly installed or

routed. An AC or DC short circuit may occur and damage the device when the SUN2000

is operating. The caused device damage is not covered under any warranty.

Terminal Description

Figure 5-12 Terminals

(1) Terminals of DC input 1

(2) Terminals of DC input 2

(3) Terminals of DC input 3

(4) Terminals of DC input 4

It is recommended that the number of PV modules connected to PV1 and PV2 be the same, and that the

number of PV modules connected to PV3 and PV4 be the same.

Procedure

Step 1 Connect the DC input power cable.

Before inserting the positive and negative connectors into the positive and negative DC input

terminals of the SUN2000, check that the DC SWITCH is OFF.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Use the Amphenol Helios H4 PV connectors supplied with the SUN2000. If the PV

connectors are lost or damaged, purchase the connectors of the same model. The device

damage caused by incompatible PV connectors is not covered under any warranty.

 Cables with high rigidity, such as armored cables, are not recommended as DC input

power cables, because poor contact may be caused by the bending of the cables.

 Before assembling DC connectors, label the cable polarities correctly to ensure correct

cable connections.

 After crimping the positive and negative metal contacts, pull the DC input power cables

back to ensure that they are connected securely.

 Insert the crimped metal contacts of the positive and negative power cables into the

appropriate positive and negative connectors. Then pull back the DC input power cables to

ensure that they are connected securely.

 Crimp the metal stamping forming contacts using crimping tool H4TC0003 (Amphenol,

recommended), H4TC0002 (Amphenol), PV-CZM-22100 (Staubli), or PV-CZM-19100

(Staubli). When choosing PV-CZM-22100 or PV-CZM-19100, do not use the locator.

Otherwise metal contacts would be damaged.

Figure 5-13 Crimping tool (H4TC0003)

(1) Locator

 The DC voltage measurement range of the multimeter must be at least 1100 V.

 If the voltage is a negative value, the DC input polarity is incorrect and needs correction.

 If the voltage is greater than 1080 V, too many PV modules configured in the same string. Remove

some PV modules.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-14 Connecting the DC input power cable

If the DC input power cable is reversely connected and the DC SWITCH is set to the ON

position, do not operate the DC SWITCH and positive and negative connectors. Otherwise,

the device may be damaged. The caused device damage is not covered under any warranty.

Wait until the solar irradiance declines and the PV string current drops to below 0.5 A. Then

set the two DC SWITCH to the OFF position, remove the positive and negative connectors,

and rectify the connection of the DC input power cable.

----End

Removing a DC connector

Before removing the positive and negative connectors, ensure that the DC SWITCH is OFF.

To remove the positive and negative connectors from the SUN2000, insert an open-end

wrench into the notch and press hard to remove the DC connector.

Figure 5-15 Removing a DC connector

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

5.5 (Optional) Installing the Smart Dongle

Procedure

 If the 4G Smart Dongle you purchase is configured with a SIM card, skip this step.

 If it is not configured with a SIM card, prepare a standard one (dimensions: 25 mm x 15 mm,

capacity ≥ 64 KB.

 When installing a SIM card, you can determine the SIM card installation direction based on the silk

screen and arrow mark on the slot.

 When being pressed into place, the SIM card will be locked, which means that the card is installed

correctly.

 To remove the SIM card, push it inwards. Then the SIM card springs out automatically.

 When reinstalling the 4G Smart Dongle, ensure that the buckle springs back in place.

Step 1 Install the Smart Dongle.

Figure 5-16 Installing the Smart Dongle.

----End

5.6 (Optional) Installing the Signal Cable

Communication port signal definitions

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

 When routing the signal cable, ensure that it is separate from the power cable and away

from interfering sources to prevent communication from being affected.

 The protection layer of the cable is in the connector. Cut off surplus core wires from the

protection layer. Ensure that the core wires are completely inserted into the cable holes,

and that the cable is securely connected.

Figure 5-17 Signal definitions

Table 5-3 Signal definitions

Definiti

Functio

Descrip

tion

Definiti

Functio

Descrip

tion

485A1-1

RS485

different

ial

signal+

Used to

connect

to the

RS485

signal

port on

the

SUN200

0 or

SmartLo

gger100

485A1-2

RS485

different

ial

signal+

Used to

connect

to the

RS485

signal

port on

the

SUN200

0 or

SmartLo

gger100

485B1-1

RS485

different

ial

signal–

485B1-2

RS485

different

ial

signal–

Shieldin

g ground

N/A

Shieldin

g ground

N/A

485A2

RS485

different

ial

signal+

Used to

connect

to an

RS485

DIN1

Dry

contact

interface

for grid

Connect

s to the

Ripple

Control

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Definiti

Functio

Descrip

tion

Definiti

Functio

Descrip

tion

485B2

RS485

different

ial

signal–

signal

port on a

Smart

Power

Sensor

for

export

limitatio

DIN2

scheduli

Device.

N/A

DIN3

GND

Signal

ground

N/A

DIN4

N/A

GND

Communication Networking

 Single Inverter+Smart Dongle Networking

Figure 5-18 Smart Dongle networking

 In the Smart Dongle networking scenario, the SmartLogger1000A cannot be connected.

 The Smart Power Sensor is necessary for export limitation. Only the DTSU666-H Smart Power

Sensor (provided by Huawei) can be used.

 Multiple Inverters+SmartLogger1000A Networking

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-19 SmartLogger networking

 In the SmartLogger1000A networking scenario, the Smart Dongle cannot be connected.

 A maximum of 80 devices can connect to a single SmartLogger1000A, such as inverters, Smart

Power sensor, and EMI. You are advised to connect fewer than 30 devices to each RS485 route.

 The Smart Power Sensor is a necessary export limitation. Select the Smart Power Sensor according

to the actual project.

 To ensure the system response speed, the Smart Power Sensor is recommended to be connected to a

COM port separately from inverter COM port.

5.6.1 Connecting the RS485 Communications Cable (Inverter

Cascading)

Procedure

Step 1 Connect the signal cable to the signal cable connector.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-20 Installing the cable

Step 2 Connect the signal cable connector to the COM port.

Figure 5-21 Securing the signal cable connector

----End

5.6.2 Connecting the RS485 Communications Cable (Smart Power

Sensor)

Cable Connection

The following figure shows the cable connections between the inverter and the Smart Power

Sensor.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-22 Cable connection

(1) Shielding layer of the signal cable

Procedure

Step 1 Connect the signal cable to the signal cable connector.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-23 Installing the cable

Step 2 Connect the signal cable to the COM port.

Figure 5-24 Securing the signal cable connector

----End

5.6.3 Connecting the Power Grid Scheduling Signal Cable

Cable Connection

The following figure shows the cable connections between the inverter and the Ripple Control

Device.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-25 Cable connection

Procedure

Step 1 Connect the signal cable to the signal cable connector.

Figure 5-26 Installing the cable

Step 2 Connect the signal cable to the COM port.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

5 Electrical Connections

Issue 03 (2019-07-19)

Figure 5-27 Securing the signal cable connector

----End

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

6 Commissioning

6.1 Check Before Power-On

Table 6-1 Installation checklist

No.

Check Item

Acceptance Criteria

SUN2000 installation

The SUN2000 is installed correctly,

securely, and reliably.

Smart Dongle

The Smart Dongle is installed correctly and

securely.

Cable layout

Cables are routed properly as required by the

customer.

Cable tie

Cable ties are secured evenly and no burr

exists.

Grounding

The ground cable is connected correctly,

securely, and reliably.

Turn off the switches

The DC SWITCH and all the switches

connected to the SUN2000 are set to OFF.

Cable connections

The AC output power cable and DC input

power cable are connected correctly,

securely, and reliably.

Unused terminals and ports

Unused terminals and ports are locked by

watertight caps.

Installation environment

The installation space is proper, and the

installation environment is clean and tidy,

without foreign matter.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

6.2 Powering On the System

Precautions

Before turning on the AC switch between the SUN2000 and the power grid, use a multimeter

set to the AC position to check that the AC voltage is within the specified range.

Procedure

Step 1 Turn on the AC switch between the SUN2000 and the power grid.

If the DC is on and the AC is off, the SUN2000 reports a Grid Failure alarm. The SUN2000

starts normally only after the fault is automatically rectified.

Step 2 If there is a DC switch between the PV string and the inverter, turn on the DC switch.

Step 3 Set the DC SWITCH at the bottom of the SUN2000 to the ON position.

Step 4 Wait for about 1 minute, and then observe the LED indicators of the inverter to check the

running status.

Table 6-2 LED indicator description

Category

Status

Meaning

Running

indication

LED1

LED2

N/A

Steady green

The SUN2000 is operating in grid-

tied mode.

Blinking green

at long intervals

(on for 1s and

then off for 1s)

Off

The DC is on and the AC is off.

Blinking green

at long intervals

(on for 1s and

then off for 1s)

Blinking green at

long intervals (on

for 1s and then off

for 1s)

The DC is on, the AC is on, and the

SUN2000 is not exporting power to

the power grid.

Off

The DC is off.a

Blinking red at

short intervals

(on for 0.2s and

then off for

0.2s)

N/A

DC environmental alarm

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

Category

Status

Meaning

N/A

Blinking red at

short intervals (on

for 0.2s and then

off for 0.2s)

AC environmental alarm

Steady red

Fault

Communica

tion

indication

LED3

N/A

Blinking green at short intervals (on

for 0.2s and then off for 0.2s)

Communication is in progress.

(When a mobile phone is connected

to the SUN2000, the indicator first

indicates that the phone is

connected to the SUN2000): blinks

green at long intervals.)

Blinking green at long intervals (on

for 1s and then off for 1s)

The mobile phone is connected to

the SUN2000.

Off

There is no communication.

Note a: The AC may be on. Check whether the external AC switch is OFF.

----End

6.3 Commissioning

6.3.1 Scenario 1: Single inverter + Smart Dongle

Downloading the App

Search for "FusionSolar" from the following app stores or scan the corresponding QR code,

download the installation package, and install the FusionSolar app by following the

instructions.

 Google Play (Android)

 App Store (iOS)

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

Figure 6-1 FusionSolar QR code

The screenshots shown in the document are from FusionSolar 2.3.0. Data in the screenshots is for

reference only. The actual screens prevail.

In Britain, only the FusionHome app can be used for commissioning. This document uses the

FusionSolar app as an example to describe the commissioning method. For the FusionHome

app, perform operations as requir ed.

Search for "FusionHome" from the following app stores or scan the corresponding QR code,

download the installation package, and install the FusionHome app by following the

instructions.

 Google Play (Android)

 App Store (iOS)

Figure 6-2 FusionHome QR code

 The initial password for connecting the inverter WiFi is Changeme

 Log in to the FusionHome app as installer. The initial password is 00000a.

 Use the initial password upon first power-on and change it immediately after login. To ensure

account security, change the password periodically and keep the new password in mind. Not

changing the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In these

cases, the user is liable for any loss caused to the PV plant.

(Optional) Installer Account Registration

Creating the first installer account will generate a domain named after the company.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

If you have an installer account, skip this step.

Figure 6-3 Creating the first installer account

To create multiple installer accounts for the same company, log in to the FusionSolar app and

tap New User.

Figure 6-4 Creating multiple installer accounts for the same company

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

Creating a PV Plant and an Account for User

Figure 6-5 Creating a PV Plant and an Account for User

For details, see the FusionSolar App Quick Guide.

You can scan the QR code to obtain it.

6.3.2 Scenario 2: Multiple Inverters + SmartLogger1000A

See the Distributed PV Plants Connecting to Huawei Hosting Cloud Quick Guide

(Distributed Inverters + SmartLogger1000A + RS485 Networking).

You can scan the QR code to obtain it.

6.3.3 Other Scenarios

1. Access Inverter commissioning.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

Figure 6-6 Method 1: before login

Figure 6-7 Method 2: after login

2. Connect to the inverter WiFi. Log in as installer, and perform Quick settings.

 When the inverter is directly connected to the mobile phone using the built-in antenna, the distance

between the inverter and mobile phone must be less than 5 m without obstructions in between to

ensure the communication quality between the FusionSolar app and inverter. The distance is for

reference only and may vary depending on mobile phones and whether there are obstructions

between the inverter and the mobile phone.

 When connecting the SUN2000L to the FusionSolar app over a router, ensure that the mobile phone

and inverter are in the WiFi coverage of the router and the SUN2000L is connected to the router.

 The router supports WiFi (IEEE 802.11 b/g/n, 2.4 GHz) and the WiFi signal reaches the inverter.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

 The WPA, WPA2, or WPA/WPA2 encryption mode is recommended for routers. Enterprise-level

encryption is not supported (for example, public hotspots requiring authentication such as airport

WiFi). WEP and WPA TKIP are not recommended because these two encryption modes have serious

security defects. If the inverter cannot be connected using WEP, log in to the router and change the

encryption mode to WPA2 or WPA/WPA2.

Figure 6-8 Quick settings

 The initial password for connecting the inverter WiFi is Changeme

 The initial password of the installer is 00000a

 Use the initial password upon first power-on and change it immediately after login. To ensure

account security, change the password periodically and keep the new password in mind. Not

changing the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In these

cases, the user is liable for any loss caused to the PV plant.

 To set more parameters, tap Parameter configuration.

3. (Optional) When multiple inverters are connected to a third-party data collector, set

RS485 parameters.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

6 Commissioning

Issue 03 (2019-07-19)

Figure 6-9 RS485 Settings

The RS485 addresses of different inverters must be different.

6.4 Powering Off the System

Precautions

After the SUN2000 is powered off, the remaining electricity and heat may still cause electric

shocks or body burns. Therefore, put on protective gloves and operate the SUN2000 five

minutes after the power-off.

Procedure

Step 1 Send a shutdown command from the app.

Step 2 Turn off the AC switch between the SUN2000 and the power grid.

Step 3 Set the DC SWITCH at the bottom of the SUN2000 to the OFF position.

Step 4 Turn off the DC switch between the PV string and the SUN2000 if there is one.

----End

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

7 Maintenance

7.1 Routine Maintenance

To ensure that the SUN2000 can operate properly for a long term, you are advised to perform

routine maintenance on it as described in this chapter.

Before cleaning the system, connecting cables, and maintaining the grounding reliability,

power off the system.

Table 7-1 Maintenance list

Check Detail

Check Method

Maintenance

Interval

System

cleanliness

Check the heat sink for foreign matter or the

overall health of the SUN2000.

Annual or every time an

abnormality is detected

System running

status

Check the SUN2000 for damage or

deformation.

Annual

Electrical

connections

 Cables are securely connected.

 Cables are intact, in particular, the parts

touching the metallic surface are not

scratched.

The first inspection is 6

months after the initial

commissioning. From

then on, the interval can

be 6 to 12 months.

Grounding

reliability

Check whether the ground terminal and

ground cable are securely connected.

Annual

Sealing

Check whether all terminals and ports are

properly sealed.

Annual

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

7.2 Troubleshooting

Alarm severities are defined as follows:

 Major: The inverter is faulty. As a result, the output power decreases or the grid-tied

power generation is stopped.

 Minor: Some components are faulty without affecting the grid-tied power generation.

 Warning: The inverter works properly. The output power decreases or some authorization

functions fail due to external factors.

Table 7-2 Common alarms and troubleshooting measures

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2001

High

String

Input

Voltage

Major

Excessive PV modules are

connected in series in the PV

array. Therefore, the open-

circuit voltage exceeds the

maximum input voltage of the

SUN2000.

Cause ID 1 = PV1 and PV2

Cause ID 2 = PV3 and PV4

Check the number of PV modules

connected in series in the PV string,

and ensure that the PV string open-

circuit voltage is no greater than the

maximum operating voltage of the

SUN2000. After you correctly

configure the PV array, the inverter

alarm disappears automatically.

2002

DC Arc

Fault

Major

The PV string power cable

arcs or is in poor contact.

Cause ID 1 = PV1 and PV2

Cause ID 2 = PV3 and PV4

Check whether the string cables arc

or are in poor contact.

2011

String

Reversed

Major

The PV string is reversely

connected.

Cause ID 1 = PV1

Cause ID 2 = PV2

Cause ID 3 = PV3

Cause ID 4 = PV4

Check whether the PV string is

reversely connected to the

SUN2000. If so, wait until the solar

irradiance declines at night and the

PV string current drops to below 0.5

A. Then, set the DC SWITCH to

the OFF position, and correct the

string polarity.

2012

String

Current

Backfeed

Warning

Only a few PV modules are

connected in series in the PV

string. Therefore, the end

voltage is lower than that of

other PV strings.

Cause ID 1 = PV1

Cause ID 2 = PV2

Cause ID 3 = PV3

Cause ID 4 = PV4

1. Check whether the number of

PV modules connected in series

to this PV string is less than the

number of PV modules

connected in series to the other

PV strings connected in parallel

with this PV string. If yes, wait

until the PV string current drops

below 0.5 A, set DC SWITCH

to OFF, and adjust the number

of PV modules in the PV string.

2. Check whether the PV string is

shaded.

3. Check whether the open-circuit

voltage of the PV string is

normal.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2031

Power

grid phase

wire

short-

circuit to

Major

Cause ID = 1

The impedance of the output

phase wire is low or short-

circuited to PE.

Check the impedance of the output

phase wire to PE, locate the position

with lower impedance and restore

that.

2032

Grid

Failure

Major

Cause ID = 1

 The power grid

experiences an outage.

 The AC circuit is

disconnected or the AC

switch is off.

1. Check the AC voltage.

2. Check whether the AC circuit is

disconnected or whether the AC

switch is off.

2033

Grid

Undervolt

age

Major

Cause ID = 1

The power grid voltage is

below the lower threshold or

the undervoltage duration

exceeds the value specified by

LVRT.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the grid voltage is

within the acceptable range. If

no, contact the local power

operator. If yes, log in to the

mobile phone app, SmartLogger,

or NMS to modify the grid

undervoltage protection

threshold with the consent of the

local power operator.

3. If the fault persists for a long

time, check the connection

between the AC switch and the

output power cable.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2034

Grid

Overvolta

Major

Cause ID = 1

The power grid voltage is

beyond the upper threshold or

the overvoltage duration

exceeds the value specified by

HVRT.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the grid voltage is

within the acceptable range. If

no, contact the local power

operator. If yes, log in to the

mobile phone app, SmartLogger,

or NMS to modify the grid

overvoltage protection threshold

with the consent of the local

power operator.

3. Check whether the peak voltage

of the power grid is too high. If

the fault persists and cannot be

rectified for a long time, contact

the power operator.

2035

Unbalance

d Grid

Voltage

Major

Cause ID = 1

The difference between grid

phase voltages exceeds the

upper threshold.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the grid voltage is

within the acceptable range. If

no, contact the local power

operator.

3. If the fault persists for a long

time, check the connection

between the AC switch and the

output power cable.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2036

Grid

Overfrequ

ency

Major

Cause ID = 1

Power grid exception: The

actual power grid frequency is

higher than the standard

requirement for the local

power grid.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the grid

frequency is within the

acceptable range. If no, contact

the local power operator. If yes,

SmartLogger, or NMS to modify

the grid overfrequency

protection threshold with the

consent of the local power

operator.

2037

Grid

Underfreq

uency

Major

Cause ID = 1

Power grid exception: The

actual power grid frequency is

lower than the standard

requirement for the local

power grid.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the grid

frequency is within the

acceptable range. If no, contact

the local power operator. If yes,

SmartLogger, or NMS to modify

the grid underfrequency

protection threshold with the

consent of the local power

operator.

2038

Unstable

Grid

Frequency

Major

Cause ID = 1

Power grid exception: The

actual grid frequency change

rate does not comply with the

local power grid standard.

1. If the alarm occurs occasionally,

the power grid may be abnormal

temporarily. The SUN2000

automatically recovers after

detecting that the power grid

becomes normal.

2. If the alarm occurs frequently,

check whether the power grid

frequency is within the

acceptable range. If not, contact

the local power operator.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2039

Output

Overcurre

Major

Cause ID = 1

The power grid voltage drops

dramatically or the power grid

is short-circuited. As a result,

the SUN2000 transient output

current exceeds the upper

threshold and therefore the

protection is triggered.

1. The SUN2000 detects its

external working conditions in

real time. After the fault is

rectified, it automatically

recovers.

2. If the alarm occurs frequently

and affects the power production

of the PV plant, check whether

the output is short-circuited. If

the fault persists, contact your

dealer or Huawei technical

support.

2040

Output

Compone

Overhigh

Major

Cause ID = 1

The DC component of the

SUN2000 output current

exceeds the specified upper

threshold.

1. The SUN2000 detects its

external working conditions in

real time. After the fault is

rectified, it automatically

recovers.

2. If the alarm occurs frequently,

contact your dealer or Huawei

technical support.

2051

Abnormal

Residual

Current

Major

Cause ID = 1

The insulation impedance of

the input side to PE decreases

when the SUN2000 is

operating.

1. If the alarm occurs occasionally,

the external power cable may be

abnormal temporarily. The

SUN2000 automatically

recovers after the fault is

rectified.

2. If the alarm occurs frequently or

persists, check whether the

impedance of the PV string to

ground is excessively low.

2061

Abnormal

Groundin

Major

Cause ID = 1

 The N cable or ground

cable is not connected.

 When a PV array is

grounded, the inverter

output is not connected to

an isolation transformer.

Power off the inverter and check the

following items:

1. Check whether the PE cable of

the SUN2000 is connected

properly.

2. If the inverter is connected to the

TN power grid, check whether

the N cable is properly

connected and whether the

voltage of the N cable to ground

is normal.

3. Check whether the output is

connected to an isolation

transformer. If yes, set

Grounding inspection to

Disable through the mobile

phone app, SmartLogger, or

NMS.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2062

Low

Insulation

Resistance

Major

Cause ID = 1

 PV arrays are short-

circuited with PE.

 The ambient air of the PV

array is damp and the

insulation between the PV

array and the ground is

poor.

1. Check the output resistance of

the PV array to ground. If there

is a short circuit or lack of

insulation, rectify it.

2. Check that the PE cable of the

SUN2000 is correctly connected.

3. If you are sure that the

impedance is less than the

default value in a cloudy or rainy

environment, log in to the

mobile phone app, SmartLogger,

or NMS and reset the insulation

impedance protection threshold.

2063

Overtemp

erature

Minor

Cause ID = 1

 The SUN2000 is installed

in a place with poor

ventilation.

 The ambient temperature

is too high.

 The SUN2000 is not

working properly.

 Check the ventilation and

ambient temperature of the

SUN2000 installation position.

 If the ventilation is poor or the

ambient temperature exceeds the

upper threshold, improve the

ventilation and heat dissipation.

 If the ventilation and ambient

temperature both meet

requirements, contact your

dealer or Huawei technical

support.

2064

Device

Fault

Major

Cause ID = 1–12

An unrecoverable fault has

occurred on a circuit inside

the SUN2000.

Turn off the AC output switch and

DC input switch, and then turn them

on after 5 minutes. If the fault

persists, contact your dealer or

Huawei technical support.

Note: If the cause ID is ID 1,

perform the preceding operation

when the PV string current is less

than 1 A.

2065

Upgrade

Failed or

Software

Version

Unmatch

Minor

Cause ID = 1, 2 and 4

The upgrade does not end

normally.

NOTE

Upgrade the inverter again if it is

stuck in initialization state

without generating any alarms

and cannot be restored to the

normal state during the upgrade

when the PV inputs are

disconnected and reconnected

next time.

1. Perform the upgrade again.

2. If the upgrade fails several

times, contact your dealer or

Huawei technical support.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

7 Maintenance

Issue 03 (2019-07-19)

Alarm ID

Alarm

Name

Alarm

Severity

Possible Cause

Troubleshooting Suggestion

2066

License

Expired

Minor

Cause ID = 1

 The privilege certificate

has entered the grace

period.

 The privilege feature will

be invalid soon.

1. Apply for a new certificate.

2. Load the new certificate.

61440

Monitorin

g Unit

Faulty

Minor

Cause ID = 1

1. The flash memory is

insufficient.

2. The flash memory has bad

sectors.

Turn off the AC output switch and

then the DC input switch. After 5

minutes, turn on the AC output

switch and then the DC input

switch. If the fault persists, replace

the board, If the upgrade fails

several times, contact your dealer or

Huawei technical support.

2067

Faulty

Power

Collector

Major

Cause ID = 1

The power meter

communication is interrupted.

1. Check that the power meter

settings are based on the actual

model.

2. Check that the communications

parameters for the power meter

are the same as the SUN2000

RS485 parameter settings.

3. Check that the power meter is

powered on, and the RS485

cable is connected correctly.

2072

Transient

Overvolta

Major

Cause ID = 1

The inverter detects that the

phase voltage exceeds the

transient AC overvoltage

protection threshold.

1. Check whether the grid

connection voltage exceeds the

upper threshold. If yes, contact

the local power operator.

2. If you have confirmed that the

grid-tied voltage exceeds the

upper threshold and have

obtained the consent of the local

power operator, modify the

overvoltage protection threshold

through the mobile phone app,

SmartLogger, or NMS.

3. Check whether the peak power

grid voltage exceeds the upper

threshold.

Contact your dealer or Huawei technical support if the measures listed in the Troubleshooting

Suggestion column have been taken but the fault persists.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

8 Handling the Inverter

Issue 03 (2019-07-19)

8 Handling the Inverter

8.1 Removing the SUN2000

Before removing the SUN2000, disconnect both the AC and DC power supplies. After

powering off the SUN2000, wait at least 5 minutes before performing operations on the

SUN2000.

Perform the following operations to remove the SUN2000:

1. Disconnect all cables from the SUN2000, including RS485 communications cables, DC

input power cables, AC output power cables, and PGND cables.

2. Remove the SUN2000 from the mounting bracket.

3. Remove the mounting bracket.

8.2 Packing the SUN2000

 If the original packing materials are available, put the SUN2000 inside them and then

seal them by using adhesive tape.

 If the original packing materials are not available, put the SUN2000 inside a suitable

cardboard box and seal it properly.

8.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal rules for

electrical equipment waste.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

9 Technical Data

Issue 03 (2019-07-19)

9 Technical Data

The SUN2000-8KTL-M0 and SUN2000-10KTL-M0 inverters are applicable only to

Australia.

Efficiency

Technical

Specificati

ons

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-M0

SUN2000-

20KTL-M0

Maximum

efficiency

98.5%

98.65%

European

efficiency

98.0%

98.3%

Input

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Maximum

input voltagea

1080 V

Maximum

input current

(per MPPT)

22 A

Maximum

short-circuit

current (per

MPPT)

30 A

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

9 Technical Data

Issue 03 (2019-07-19)

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Maximum

inverter

backfeed

current to the

PV array

0 A

Minimum

startup

voltage

200 V

Operating

voltage

rangeb

160–950 V

Full-load

MPPT

voltage range

320–850 V

380–850 V

400–850 V

480–850 V

Rated input

voltage

600 V

Number of

input routes

Number of

MPP trackers

Note a: The maximum input voltage is the upper threshold of the DC voltage. If the input voltage exceeds

the threshold, the solar inverter may be damaged.

Note b: If the input voltage is beyond the operating voltage range, the solar inverter cannot work

properly.

Output

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Rated active

power

8000 W

10000 W

12000 W

15000 W

17000 W

20000 W

Maximum

apparent

power

8800 VA

11000 VA

13200 VA

16500 VA

18700 VA

22000 VA

Maximum

active power

(cosφ = 1)

8800 W

11000 W

13200 W

16500 W

18700 W

22000 W

Rated output

voltage

220/380 V, 230/400 V, 3W+(N)+PE

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

9 Technical Data

Issue 03 (2019-07-19)

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Rated output

current

12.8 A (380

V)/11.6 A

(400 V)

15.9 A (380

V)/14.5 A

(400 V)

18.2 A (380

V)/17.3 A

(400 V)

22.8 A (380

V)/21.7 A

(400 V)

25.8 A

(380

V)/24.6 A

(400 V)

30.4 A (380

V)/28.9 A

(400 V)

Maximum

output

current

13.4 A

17 A

20 A

25.2 A

28.5 A

33.5 A

Adapted

power grid

frequency

50/60 Hz

Power factor

0.8 leading... 0.8 lagging

Maximum

total

harmonic

distortion

(rated power)

< 3%

Inrush

current

153 A (peak current, duration < 33μs)

Maximum

output fault

current

237 A (peak current, duration < 1ms)

Maximum

output

overcurrent

protection

13.45 A

Protection and Feature

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

AFCI

Yes

Input DC

switch

Yes

Anti-

islanding

protection

Yes

Output

overcurrent

protection

Yes

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

9 Technical Data

Issue 03 (2019-07-19)

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Output short-

circuit

protection

Yes

Output

overvoltage

protection

Yes

Input reverse

connection

protection

Yes

PV string

fault

detection

Yes

DC surge

protection

Yes

AC surge

protection

Yes

Insulation

resistance

detection

Yes

Residual

current

monitoring

unit (RCMU)

Yes

Display and Communication

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000

-17KTL-

SUN2000-

20KTL-M0

Display

LED indicators; WLAN+app

RS485

Yes

Communicati

ons

expansion

module

(Optional) WLAN/4G

Remote dry

contact

scheduling

Yes

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

9 Technical Data

Issue 03 (2019-07-19)

Common Parameters

Technical

Specificatio

SUN2000-

8KTL-M0

SUN2000-

10KTL-M0

SUN2000-

12KTL-M0

SUN2000-

15KTL-M0

SUN2000-

17KTL-

SUN2000-

20KTL-M0

Dimensions

(W x H x D)

525mm×470mm×262mm

Net weight

25 kg

Operating

temperature

–25°C to +60°C (derated at +45ºC or higher)

Cooling

mode

Natural convection

Highest

operating

altitude

0–4000 m (derated above 2000 m)

Relative

humidity

0%–100% RH

Input

terminal

Amphenol Helios H4

Output

terminal

Waterproof quick-connect terminal

IP rating

IP65

Topology

No transformer

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

A Grid Codes

Issue 03 (2019-07-19)

A Grid Codes

The grid codes are subject to change. The listed codes are for your reference only.

Table A-1 Grid Codes

No.

Grid Codes

Description

VDE-AR-N-4105

Germany low-voltage power grid

UTE C 15-712-1 (A)

France mainland low-voltage power

grid

UTE C 15-712-1 (B)

France island power grid (230 V 50

Hz)

UTE C 15-712-1 (C)

France island power grid (230 V 60

Hz)

VDE 0126-1-1-BU

Bulgaria low-voltage power grid

VDE 0126-1-1-GR (A)

Greece mainland low-voltage power

grid

VDE 0126-1-1-GR (B)

Greece island low-voltage power grid

BDEW-MV

Germany medium-voltage power grid

G59-England

England 230 V power grid (I > 16 A)

G59-Scotland

Scotland 240 V power grid (I > 16 A)

G83-England

England 230 V power grid (I < 16 A)

G83-Scotland

England 240 V power grid (I < 16 A)

CEI0-21

Italy low-voltage power grid

EN50438-CZ

Czech Republic low-voltage power

grid

RD1699/661

Spain low-voltage power grid

EN50438-NL

Netherlands low-voltage power grid

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

A Grid Codes

Issue 03 (2019-07-19)

No.

Grid Codes

Description

C10/11

Belgium low-voltage power grid

AS4777

Australia low-voltage power grid

IEC61727

IEC61727 low-voltage power grid (50

Hz)

User-defined (50 Hz)

Reserved

User-defined (60 Hz)

Reserved

CEI0-16

Italy low-voltage power grid

TAI-PEA

Thailand low-voltage power grid

(PEA)

TAI-MEA

Thailand low-voltage power grid

(MEA)

EN50438-TR

Turkey low-voltage power grid

Philippines

Philippines low-voltage power grid

NRS-097-2-1

South Africa low-voltage power grid

KOREA

South Korea low-voltage power grid

IEC61727-60Hz

IEC61727 low-voltage power grid (60

Hz)

ANRE

Romania low-voltage power grid

EN50438_IE

Ireland low-voltage power grid

PO12.3

Spain low-voltage power grid

Egypt ETEC

Egypt medium-voltage power grid

CLC/TS50549_IE

Ireland low-voltage power grid

Jordan-Transmission

Jordan low-voltage power grid

NAMIBIA

Namibia low-voltage power grid

ABNT NBR 16149

Brazil low-voltage power grid

SA_RPPs

South Africa low-voltage power grid

INDIA

India low-voltage power grid

ZAMBIA

Zambia low-voltage power grid

Chile

Chile low-voltage power grid

Malaysian

Malaysia low-voltage power grid

KENYA_ETHIOPIA

Kenya low-voltage power grid and

Ethiopia low-voltage power grid

NIGERIA

Nigeria low-voltage power grid

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

A Grid Codes

Issue 03 (2019-07-19)

No.

Grid Codes

Description

DUBAI

Dubai low-voltage power grid

Northern Ireland

Northern Ireland low-voltage power

grid

Cameroon

Cameroon low-voltage power grid

Jordan-Distribution

Jordan power distribution network

low-voltage power grid

LEBANON

Lebanon low-voltage power grid

TUNISIA

Tunisia low-voltage power grid

AUSTRALIA-NER

Australia NER standard low-voltage

power grid

SAUDI

Saudi Arabia low-voltage power grid

Israel

Israel low-voltage power grid

Chile-PMGD

Chile PMGD low-voltage power grid

VDE-AR-N4120_HV

VDE41200 standard low-voltage

power grid

Vietnam

Vietnam low-voltage power grid

TAIPOWER

Taiwan low-voltage power grid

OMAN

Oman low-voltage power grid

KUWAIT

Kuwait low-voltage power grid

BANGLADESH

Bangladesh low-voltage power grid

CHILE_NET_BILLING

Chile Net Billing low-voltage power

grid

BAHRAIN

Bahrain low-voltage power grid

Fuel-Engine-Grid

DG hybrid low-voltage power grid

(50 Hz)

Fuel-Engine-Grid-60Hz

DG hybrid low-voltage power grid

(60 Hz)

ARGENTINA

Argentina low-voltage power grid

Mauritius

Mauritius low-voltage power grid

EN50438-SE

Sweden low-voltage power grid

Austria

G99-TYPEA-LV

United Kingdom

G99-TYPEB-LV

United Kingdom

G99-TYPEB-HV

United Kingdom

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

A Grid Codes

Issue 03 (2019-07-19)

No.

Grid Codes

Description

G99-TYPEA-HV

United Kingdom

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

B Setting Dry Contact Scheduling Parameters

Issue 03 (2019-07-19)

B Setting Dry Contact Scheduling

Parameters

Scenario 1: Single inverter + Smart Dongle

Prerequisites

You have logged in to the app as installer. The initial password is 00000a. Use the initial

password upon first power-on and change it immediately after login. To ensure account

security, change the password periodically and keep the new password in mind. Not changing

the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In

these cases, the user is liable for any loss caused to the PV plant.

Procedure

Step 1 Set dry contact scheduling parameters.

Set Dry contact scheduling to , and set Active power control and Reactive power control.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

B Setting Dry Contact Scheduling Parameters

Issue 03 (2019-07-19)

Figure B-1 Setting dry contact scheduling parameters

----End

Scenario 2: Multiple Inverters + SmartLogger1000A

See the SmartLogger1000A User Manual.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

C Setting Export Limitation Parameters

Issue 03 (2019-07-19)

C Setting Export Limitation Parameters

Scenario 1: Single inverter + Smart Dongle

Prerequisites

You have logged in to the app as installer. The initial password is 00000a. Use the initial

password upon first power-on and change it immediately after login. To ensure account

security, change the password periodically and keep the new password in mind. Not changing

the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In

these cases, the user is liable for any loss caused to the PV plant.

Procedure

Step 1 Set export limitation parameters.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

C Setting Export Limitation Parameters

Issue 03 (2019-07-19)

Figure C-1 Setting export limitation parameters

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

C Setting Export Limitation Parameters

Issue 03 (2019-07-19)

Table C-1 Setting export limitation parameters

Parameter

Value Range

Description

Control mode

 Not restricted

 Grid connected with zero

power

 Power-limited grid

connected

 If this parameter is set to

Not restricted, the

SUN2000 output power

is not limited. The

SUN2000 can export its

rated power to the power

grid.

 If this parameter is set to

Grid connection with

zero power and the

SUN2000 is connected

to a power meter, the

output power of the

SUN2000 is supplied

only to the local load,

but not the power grid.

 If this parameter is set to

Power-limited grid

connection and the

SUN2000 is connected

to a Smart power sensor,

the SUN2000 supplies

power limited based on

the setting of Grid-tied

Point Power to the

power grid.

Closed-loop controller

 External controller

 Inverter

 Set this parameter to

External controller

when the

SmartLogger1000A is

connected.

 If multiple inverters are

cascaded, set this

parameter to External

controller.

 If a single inverter is

used, set this parameter

to Inverter.

----End

Scenario 2: Multiple Inverters + SmartLogger1000A

See the SmartLogger1000A User Manual.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

D Setting Voltage Rise Suppression Q-U Curve

Issue 03 (2019-07-19)

D Setting Voltage Rise Suppression Q-U

Curve

Scenario 1: Single inverter + Smart Dongle

Prerequisites

You have logged in to the app as installer. The initial password is 00000a. Use the initial

password upon first power-on and change it immediately after login. To ensure account

security, change the password periodically and keep the new password in mind. Not changing

the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In

these cases, the user is liable for any loss caused to the PV plant.

Procedure

Step 1 Set voltage rise suppression Q-U curve parameters.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

D Setting Voltage Rise Suppression Q-U Curve

Issue 03 (2019-07-19)

Figure D-1 Setting voltage rise suppression Q-U curveparameters

----End

Scenario 2: Multiple Inverters + SmartLogger1000A

See the SmartLogger1000A User Manual.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

E Starting AFCI Check

Issue 03 (2019-07-19)

E Starting AFCI Check

Prerequisites

You have logged in to the app as installer. The initial password is 00000a. Use the initial

password upon first power-on and change it immediately after login. To ensure account

security, change the password periodically and keep the new password in mind. Not changing

the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In

these cases, the user is liable for any loss caused to the PV plant.

Procedure

Step 1 On the Home screen, choose Device maintenance > Start AFCI check and perform the

required operation.

Figure E-1 Start AFCI check

----End

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

F IPS Test (for Italy CEI0-21 Grid Code only)

Issue 03 (2019-07-19)

F IPS Test (for Italy CEI0-21 Grid Code

only)

Prerequisites

You have logged in to the app as installer. The initial password is 00000a. Use the initial

password upon first power-on and change it immediately after login. To ensure account

security, change the password periodically and keep the new password in mind. Not changing

the initial password may cause password disclosure. A password left unchanged for a long

period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In

these cases, the user is liable for any loss caused to the PV plant.

Context

The Italy CEI0-21 grid code requires an IPS test for the SUN2000. During the IPS test

process, the SUN2000 consecutively tests the protection thresholds and time for 10-min

overvoltage, level 1 overvoltage, level 1 undervoltage, level 1 overfrequency, and level 1

underfrequency. The SUN2000 shuts down after the IPS test starts, and it restarts after the IPS

test is successful.

Procedure

Step 1 On the Home screen, choose Device maintenance > IPS test to access the IPS test screen.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

F IPS Test (for Italy CEI0-21 Grid Code only)

Issue 03 (2019-07-19)

Figure F-1 IPS test

Step 2 Choose to start the S1 or S2 check as required. The default check type is S2. To start the S2

check, you need to set External Signal or Local Command.

Table F-1 IPS test type description

IPS Test Type

Description

External Signal

Setting

Local Command

Setting

The level 1

overfrequency

protection threshold

is 50.5 Hz and the

level 1

underfrequency

protection threshold

is 49.5 Hz.

The level 1

overfrequency

protection threshold

is 51.5 Hz and the

level 1

underfrequency

protection threshold

is 47.5 Hz.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

F IPS Test (for Italy CEI0-21 Grid Code only)

Issue 03 (2019-07-19)

IPS Test Type

Description

External Signal

Setting

Local Command

Setting

S2 (default)

The level 1

overfrequency

protection threshold

is 51.5 Hz and the

level 1

underfrequency

protection threshold

is 47.5 Hz.

The level 1

overfrequency

protection threshold

is 51.5 Hz and the

level 1

underfrequency

protection threshold

is 47.5 Hz.

Step 3 Tap Start to start the IPS test. After the IPS test is complete, IPS State is displayed as IPS

state success. Tap Reports in the upper right corner of the IPS test screen to view IPS Self-

Check Report.

----End

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

G DRM Configuration Guide for Standard AS

NZS4777.2

Issue 03 (2019-07-19)

G DRM Configuration Guide for

Standard AS NZS4777.2

If Demand Response Modes are required, then the installer will need to connect the Huawei

SmartLogger1000A. Refer to the Huawei document SmartLogger1000A User Manual for

Standard AS NZS4777.2 of how to connect the DRED and how to configure the inverter and

Smart Logger for use with the DRED.

SUN2000-(8KTL, 10KTL, 12KTL, 15KTL, 17KTL,

20KTL)-M0

User Manual

H Acronyms and Abbreviations

Issue 03 (2019-07-19)

H Acronyms and Abbreviations

ACDU

alternating current distribution unit

AFCI

arc-fault circuit interrupter

LED

light emitting diode

MPP

maximum power point

MPPT

maximum power point tracking

photovoltaic

RCD

residual current device

WEEE

waste electrical and electronic equipment

Table of Contents

Huawei SUN2000-4KTL-M0 User Manual

Related Manuals