Imou Bullet 2C User Manual
Displayed below is the user manual for Bullet 2C by Imou which is a product in the Security Cameras category. This manual has pages.
Related Manuals
About the Guide
- This quick start guide is for reference only. Minor difference might
be found in user interface.
- All the design and software here are subject to change without
prior written notice.
- All trademarks and registered trademarks mentioned are the
properties of their respective owners.
- Please visit our website or contact your local service engineer for
more information.
- If there is any uncertainty or controversy, please refer to our final
explanation.
Make sure that the mounting surface is strong enough to hold at least
three times of the device weight.
Step1 Drill screw holes on the mounting surface as the positioning
map shows, and then put in the expansion bolts.
Step2 Attach the pedestal to the mounting surface with the
self-tapping screws.
Step3 Power up the camera, and then adjust the lens to the ideal angle.
Step 1
Step 3
Connect the camera to power source with the power adapter.
Scan the following QR code or search “Imou Life” in Google Play or App
Store to download and install the app.
Step 5
Step 4
Do the following operations to finish adding camera.
Run Imou Life App, and then register an account for the first use.
Step 2
Wait for booting to be finished, and then the camera indicator flashes
with green light.
Note:
If the Wi-Fi network has changed or the indicator status goes
wrong, reset the camera, and then do step 5 to add it again.
If you have more than one camera, do step 5 to add them one
by one.
Note: If you have installed the app, update it to the latest version.
Note:
Camera
Self-tapping Screw
Positioning Map
Expansion Bolt
Mounting Surface
with Imou Life AppOperating Installing Camera
Select Wi-Fi
Wi-Fi XXXXXX1
Wi-Fi XXXXXX2
Wi-Fi XXXXXX3
...
Wi-Fi Password
Screw Package ×1
Camera ×1 Note: Press and hold the
reset button
for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
Version 1.0.0
Quick Start Guide
1.2.51.32.16523-000
Positioning Map ×1
QSG ×1
LED Indicator
Lens
Reset Button
Built-in Mic
Wi-Fi Antenna
Power Adapter ×1
Micro SD Card Slot
ListPacking IntroductionCamera
LED Indicator Status Device Status
Green light flashing
Green light on
Red light flashing
Green and red lights
flashing alternately
Powered off/LED turned off
Rebooting after reset
Booting
Device malfunction
Waiting for network
Operating properly
Network connection failed
Off
Red light on
Firmware updating
Waterproof Connector ×1