Philips DS6800W/37 User Manual
Displayed below is the user manual for DS6800W/37 by Philips which is a product in the Loudspeakers category. This manual has pages.
Related Manuals
www.philips.com/welcome
Register your product and get support at
DS6800W
English 3
Español 25
Français 51
DS6800W_37_UM_Book.indb Start1 2011-9-14 10:53:19
1
English
EN
Contents
1 Important 2
Safety 2
Notice 3
2 Your Entertainment System 5
Introduction 5
What's in the box 5
What else you need 5
Overview of the main speaker 6
Overview of the remote control 7
3 Prepare 7
Connect 7
Prepare the remote control 8
4 Connect to your home Wi-Fi
network for AirPlay 9
Scenario 1: Connect to a WPS router 9
Scenario 2: Connect to a non-WPS
router 10
5 Play 15
Stream audio from your iTunes music
library to DS6800W 15
Control play 17
Use advanced sound settings 17
Play/charge your iPod/iPhone/iPad
through USB socket 18
Play from an external device 18
6 Update rmware 19
Download the update le 19
Update from the con guration page 19
7 Product information 20
Speci cations 20
8 Troubleshooting 21
DS6800W_37_UM_Book.indb 1 2011-9-14 10:53:24
2EN
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampli ers) that
produce heat.
i Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not t into
your outlet, consult an electrician for
replacement of the obsolete outlet.
j Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
k Only use attachments/accessories
speci ed by the manufacturer.
l Use only with the cart, stand, tripod,
bracket, or table speci ed by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
m Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n Refer all servicing to quali ed service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
o Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
• Install all batteries correctly, + and - as
marked on the unit.
• Remove batteries when the unit is not
used for a long time.
• Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
p Apparatus shall not be exposed to
dripping or splashing, keep it away from
direct sunlight,naked ames or heat.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
ames or heat.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
DS6800W_37_UM_Book.indb 2 2011-9-14 10:53:24
3
English
EN
Risk of overheating! Never install this apparatus
in a con ned space. Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
Notice
Notice of compliance
Modi cations
The user is cautioned that changes or
modi cations not expressly approved by the
party responsible for compliance could void the
user’s authority to operate the equipment.
FCC & RSS compliance statement
This device complies with Part 15 of the FCC
Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the
following two conditions:
a This device may not cause harmful
interference, and
b This device must accept any interference
received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an
uncontrolled environment. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of
at least 20 cm from all persons and must not
be collocated or operating in conjunction with
any other antenna or transmitter. Installers must
ensure that 20cm separation distance will be
maintained between the device (excluding its
handset) and users.
FCC rules
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Canada:
This Class B digital apparatus complies with
Canadian ICES-003.
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
DS6800W_37_UM_Book.indb 3 2011-9-14 10:53:25
4EN
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Information about the use of batteries:
Caution
• Risk of leakage: Only use the speci ed type of batteries.
Do not mix new and used batteries. Do not mix
different brands of batteries. Observe correct polarity.
Remove batteries from products that are not in use for
a longer period of time. Store batteries in a dry place.
• Risk of injury: Wear gloves when handling leaking
batteries. Keep batteries out of reach of children and
pets.
• Risk of explosion: Do not short circuit batteries. Do
not expose batteries to excessive heat. Do not throw
batteries into the re. Do not damage or disassemble
batteries. Do not recharge non-rechargeable batteries.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect speci cally to
iPod, iPhone, or iPad, respectively, and has
been certi ed by the developer to meet
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
AirPlay, iPod, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other
countries. iPad is a trademark of Apple Inc.
Note
• The type plate is located on the bottom of the
apparatus.
DS6800W_37_UM_Book.indb 4 2011-9-14 10:53:25
5
English
EN
2 Your
Entertainment
System
Congratulations on your purchase, and
welcome to Philips! To fully bene t from the
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
Apple AirPlay technology enables you to play
your iTunes music library, hosted on a Mac, PC,
iPhone, iPod touch, or iPad on any AirPlay-
enabled device (for example, your DS6800W)
connected to the Wi-Fi network.
With an AirPlay-enabled device (for example,
your DS6800W), you can:
• stream audio from your iTunes music
library to any room in your house
• choose which AirPlay-enabled devices you
want to play music on (if you have more
than one such devices in your house)
• stream audio to multiple AirPlay-
enabled devices at the same time
(from the iTunes music library on your
PC/Mac only)
Tip
• Please visit www.philips.com/welcome for information
about more Philips AirPlay-enabled devices.
With DS6800W, you can also:
• charge your iPod/iPhone/iPad through
the USB socket with an Apple USB
cable (not supplied).
• play your iTunes music library on your
iPod/iPhone/iPad through the USB
socket directly while charging.
• play music from other audio devices
through the MP3-LINK socket.
What's in the box
Check and identify the contents of your package:
• Main unit (2 x wireless SoundSphere
speakers, with a built-in Wi-Fi module)
• 1 x AC power adaptor
• 1 x MP3 link cable
• 1 x DIN cable for speaker connection
• 1 x remote control with battery
• User manual
• Quick start guide
What else you need
To stream audio wirelessly by AirPlay, you need:
• A Wi-Fi certi ed router
• A host for your iTunes music library,
for example, an iPod touch/iPhone/
iPad installed with iOS 4.3 (or later) or
a Wi-Fi enabled PC/Mac installed with
iTunes 10 (or later)
Your DS6800W should be connected to the
same local network as your iTunes host device
through the Wi-Fi router.
List of compatible iTunes host devices
for AirPlay
In terms of AirPlay, DS6800W is compatible
with:
• a Wi-Fi enabled PC/Mac installed with
iTunes 10 (or later); and
• the following iPod/iPhone/iPad models
installed with iOS 4.3 (or later):
• iPad 2
• iPad
• iPhone 4
• iPhone 3GS
• iPod touch (2nd, 3rd, and 4th
generation)
DS6800W_37_UM_Book.indb 5 2011-9-14 10:53:25
6EN
Overview of the main
speaker
a DC-IN
• Connect the power adaptor.
b WI-FI SETUP button/indicator
• Connect the unit to a Wi-Fi network.
• Show the Wi-Fi connection status of
the unit.
c MP3-LINK
• Connect an external audio player
through the supplied MP3 link cable.
d CABLE IN
• Connect the two speakers through the
supplied speaker cable.
e USB
• Connect an iPod/iPhone/iPad through
an Apple USB cable (not supplied).
f IR sensor
• Detect signals from the remote
control. Point the remote control
directly at the sensor.
g
• Turn the unit on/off.
• (Press and hold) reset the unit.
h +/-
• Adjust volume.
b
a
c
d
f
g
h
e
DS6800W_37_UM_Book.indb 6 2011-9-14 10:53:25
7
English
EN
Overview of the remote
control
a
• Turn the unit on/off.
b +/-
• Adjust volume.
c /
• Skip to the previous/next track.
d AirPlay
• Select the AirPlay audio source.
e MUTE
• Mute or restore volume.
f USB
• Select the USB audio source (for iPod/
iPhone/iPad only).
g MP3 LINK
• Select the MP3 link audio source.
h PLAY/PAUSE
• Start or pause play.
a
b
c
d
ef
g
h
3 Prepare
Always follow the instructions in this chapter in
sequence.
Connect
Connect speaker cables
Note
• For optimal sound, use the supplied speakers only.
• The supplied DIN cable is only intended for use with
DS6800W. Never try to connect any other devices
through this cable.
• Connect the supplied DIN cable to the
CABLE IN sockets on both speakers.
Connect power
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
• Before you connect the AC adaptor, make sure that you
have completed all the other connections.
DS6800W_37_UM_Book.indb 7 2011-9-14 10:53:26
8EN
• Connect the AC power cord to
• the DC-IN socket on the back of the
main speaker.
• the wall power socket.
Turn DS6800W on
1 Press to turn the unit on.
2 Wait for successful boot-up of the unit.
» The boot-up takes about 35 seconds.
» During boot-up, the Wi-Fi SETUP
indicator on the back of the main
speaker blinks green quickly.
» After boot-up, if no Wi-Fi connection
has been set up for DS6800W, the
Wi-Fi SETUP indicator starts to blink
green slowly.
• To turn the unit off, press again.
Prepare the remote control
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For rst-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2032 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
• Before pressing any function button on the remote
control, rst select the correct source with the remote
control instead of the main unit.
• If you are not going to use the remote control for a
long time, remove the battery.
DS6800W_37_UM_Book.indb 8 2011-9-14 10:53:27
9
English
EN
4 Connect to
your home Wi-
Fi network for
AirPlay
To connect DS6800W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi setting to DS6800W.
You can do this in two ways (depending on
which type of Wi-Fi router you use):
• Automatically - if your Wi-Fi router is
WPS (Wi-Fi Protected Setup)-enabled
and supports PBC (Push Button
Connection) (see 'Scenario 1: Connect
to a WPS router' on page 9 )
• Manually - if your Wi-Fi router does
not support WPS (see 'Scenario 2:
Connect to a non-WPS router' on
page 10 )
Once connected successfully, DS6800W will
remember your home Wi-Fi settings. Then
you can enjoy AirPlay whenever DS6800W is
powered on and connected to your home Wi-
Fi network automatically.
Before connection of DS6800W to you home
Wi-Fi network, check the points below.
1 Make sure that your Wi-Fi router is
powered on and working properly.
2 Make sure that DS6800W has been
powered on and booted up successfully
(see 'Turn DS6800W on' on page 8 ) .
3 Identify the type of your Wi-Fi router (see
the user manual of your Wi-Fi router for
details).
Scenario 1: Connect to a
WPS router
Note
• Before you press any button on DS6800W, make sure
that DS6800W has been booted up successfully (see
'Turn DS6800W on' on page 8 ) .
1 Press the WPS button on your home Wi-Fi
router.
2 Shortly after step 1, press Wi-Fi SETUP on
the back of the main speaker.
» The Wi-Fi SETUP indicator blinks red,
yellow and green alternately.
» Within 2 minutes, the WI-FI SETUP
indicator stops blinking and stays green,
and the unit beeps.
» DS6800W is connected to your home
Wi-Fi network successfully.
WPS
DS6800W_37_UM_Book.indb 9 2011-9-14 10:53:27
10 EN
Tip
• For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router con guration pages. See
the user manuals of the speci c routers for details.
• If the Wi-Fi SETUP indicator on DS6800W blinks
yellow, it means that the Wi-Fi connection has failed.
Please wait for 2 minutes and try again. If the problem
remains, try to set up the Wi-Fi connection manually
(see 'Scenario 2: Connect to a non-WPS router' on
page 12 ) .
• If the Wi-Fi connection fails again, press and hold on
the main speaker to reset it, and then try again.
Scenario 2: Connect to a
non-WPS router
Note
• You can also follow the procedures below to connect
DS6800W to a WPS router manually.
To connect DS6800W to a Wi-Fi router
manually, you need access to DS6800W's
built-in con guration web page for change of
its internal Wi-Fi settings. To do so, you need a
Wi-Fi enabled device with an Internet browser
WI-FI
SETUP
for temporary Wi-Fi connection to DS6800W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection of
DS6800W to a non-WPS Wi-Fi router.
1 Collect settings of your home Wi-Fi router
and write down on paper for use during
DS6800W Wi-Fi setup (see 'Collect
settings of your home Wi-Fi router' on
page 10 ) .
2 Switch DS6800W to Assisted Wi-Fi Setup
mode (see 'Switch DS6800W to Assisted
Wi-Fi Setup mode' on page 11 ) .
» A new Wi-Fi network created by
DS6800W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay .
3 Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see 'Connect your Wi-Fi enabled device
to the newly created Wi-Fi network' on
page 11 ) .
4 Open the built-in web page of DS6800W
with the Internet Browser of your Wi-Fi
enabled device (see 'Open the built-in web
page of DS6800W' on page 13 ) .
5 Change the internal Wi-Fi settings of
DS6800W based on the settings you
wrote on paper at step 1 (see 'Change the
internal Wi-Fi settings of DS6800W' on
page 14 ) .
6 Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
'Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting' on
page 14 ) .
Collect settings of your home Wi-Fi
router
Note
• Always consult the user manual of your home Wi-Fi
router for detailed instructions.
DS6800W_37_UM_Book.indb 10 2011-9-14 10:53:28
11
English
EN
1 Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2 Launch the Internet browser (for example,
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3 Open the con guration page of your
home Wi-Fi router.
4 Find the Wi-Fi settings tab and write down
the following information on paper:
A Network name (SSID)
B Wi-Fi security mode (usually WEP,
WPA or WPA2 if enabled)
C Wi-Fi password (if Wi-Fi security is
enabled)
D DHCP mode (enabled or disabled)
E Static IP address settings (if DHCP
mode is disabled)
Switch DS6800W to Assisted Wi-Fi
Setup mode
• After successful boot-up , press and hold
Wi-Fi SETUP on the back of the main
speaker for more than 5 seconds.
» The Wi-Fi SETUP indicator blinks
green and yellow alternately.
» A new Wi-Fi network of DS6800W
itself is created, with the network name
(SSID) of Philips Fidelio AirPlay .
» It takes about 45 seconds for successful
creation of this new Wi-Fi network.
Note
• After you nish manual Wi-Fi setting for DS6800W, this
new Wi-Fi network disappears.
• If you fail to enter Assisted Wi-Fi Setup mode, power
off DS6800W and power on it, then try again after
successful boot-up.
• Make sure that there are no other Philips AirPlay-
enabled devices in Assisted Wi-Fi Setup mode at the
same time. Multiple new Wi-Fi networks created this
way may interfere with each other.
Connect your Wi-Fi enabled device to
the newly created Wi-Fi network
The new Wi-Fi network created by DS6800W
only allows access of one Wi-Fi enabled device.
To avoid interference from any other Wi-Fi
devices, you are recommended to temporarily
disable the Wi-Fi function on your other Wi-Fi
devices.
Option 1: Use your iPod touch/iPhone/iPad
1 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
2 Select Philips Fidelio AirPlay from the list
of available networks.
DS6800W_37_UM_Book.indb 11 2011-9-14 10:53:28
12 EN
3 Wait until successful Wi-Fi connection on
your iPod touch/iPhone/iPad.
» is displayed at the upper left corner
of your iPod touch/iPhone/iPad.
Tip
• If Philips Fidelio AirPlay is not in the list, try to scan the
available Wi-Fi networks again.
Option 2: Use your Wi-Fi enabled PC/Mac
Note
• See the user manual of your PC/Mac for how to
connect your PC/Mac to a Wi-Fi network.
• During Wi-Fi network connection, do not connect any
network cable to your PC/Mac.
1 Open the Wi-Fi setup tool or control
panel on your PC/Mac.
2 Scan the available Wi-Fi networks.
Philips Fidelio AirPlay
3 Select Philips Fidelio AirPlay from the list
of available networks.
4 Wait until successful Wi-Fi connection on
your PC/Mac.
Tip
• If Philips Fidelio AirPlay is not in the list, try to scan the
available Wi-Fi networks again.
DS6800W_37_UM_Book.indb 12 2011-9-14 10:53:29
13
English
EN
Open the built-in web page of
DS6800W
1 Launch Apple Safari browser or any other
Internet browser on your Wi-Fi enabled
device.
2 Type in 192.168.1.1 at the browser
address bar and con rm.
» The DS6800W con guration web
page is displayed.
If you use Safari on your Wi-Fi enabled PC/
Mac, you can also select 'Philips_Fidelio XXX'
from the Bonjour pull-down list to enter the
DS6800W con guration web page directly.
1 Click -> Preferences .
» The Bookmarks menu is displayed.
192.168.1.1
2 Tick Include Bonjour for Bookmarks bar .
3 Select 'Philips_Fidelio XXX' from the
Bonjour pull-down list shown at the
bookmarks bar.
» The DS6800W con guration web
page is displayed.
DS6800W_37_UM_Book.indb 13 2011-9-14 10:53:30
14 EN
Change the internal Wi-Fi settings of
DS6800W
On the DS6800W con guration web page,
you can change the internal Wi-Fi settings of
DS6800W for connection of DS6800W to
your existing home Wi-Fi network.
Note
• Make sure that the settings on the con guration web
page match your home Wi-Fi network settings that you
wrote on paper.
• Follow the on-screen instructions to
change and con rm the internal Wi-Fi
settings of DS6800W.
» After a while, the indicator on the back
of DS6800W stops blinking and stays
green, and the unit beeps.
» DS6800W is connected to your
existing home Wi-Fi network
successfully.
Note
• If the WI-FI SETUP indicator on DS6800W does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and DS6800W and then power on them again to see
whether DS6800W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
• After you nish the above changes or power-off and
power-on of DS6800W, the new Wi-Fi network
created by DS6800W will disappear.
Tip
• If you like, you can change the name of your DS6800W
in Advanced settings -> AirPlay Device Name on the
DS6800W con guration web page. This is helpful when
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
• If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY on
the DS6800W con guration web page.
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
Note
• Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
• Or open the list of available Wi-Fi
networks on your PC/Mac.
DS6800W_37_UM_Book.indb 14 2011-9-14 10:53:32
15
English
EN
2 Select your network name (SSID) from the
list of available wireless networks.
3 Enter the network key if required.
4 Wait until successful Wi-Fi connection to
your home Wi-Fi network.
5 Play
Stream audio from your
iTunes music library to
DS6800W
Note
• Make sure that your iTunes host device is connected
to the same Wi-Fi network as DS6800W. Your iTunes
device can be an iPod touch/iPhone/iPad installed with
iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed
with iTunes 10 (or later).
Stream from your iPod touch/iPhone/
iPad
1 Launch the iPod application on your iPod
touch/iPhone/iPad.
2 Tap on the AirPlay icon.
3 Select Philips_Fidelio XXXX (or user
customized name) from the AirPlay list.
DS6800W_37_UM_Book.indb 15 2011-9-14 10:53:32
16 EN
4 Select a media le and start play.
» After a while, you will hear music from
DS6800W.
Note
• If you fail to hear music after successful setup, do one of
the following on your iPod touch/iPhone/iPad:
• (1) Disconnect and then re-connect to the same Wi-Fi
router again;
• (2) Close all applications running at the background;
• (3) Power off and then power on your iPod touch/
iPhone/iPad again.
Stream from your PC/Mac
1 Launch iTunes 10 (or a later version) on
your PC/Mac.
2 Click the AirPlay icon on the window.
DS6800W_37_UM_Book.indb 16 2011-9-14 10:53:33
17
English
EN
3
Select Philips_Fidelio_AirPlay XXXX (or
user customized name) from the AirPlay
list.
4
Select a media le and start play.
» After a while, you will hear music from
DS6800W.
Tip
• When you stream audio from your iTunes music library
on a PC/Mac, you can select more than one AirPlay-
enabled devices (if available) at step 3 to stream music
to all of them at the same time.
• If you are using an earlier version of iTunes, the AirPlay
icon may be instead of .
Control play
You can select different play options from either
your iTunes host device or DS6800W.
Note
• The operations below are based on the supplied
remote control of DS6800W.
• Make sure that you have successfully streamed audio
from your iTunes music library to DS6800W.
• To start or pause play, press .
• To skip to the previous or next track, press
/ .
• To adjust volume, press +/- repeatedly.
• To mute or restore volume, press .
• To switch to the AirPlay audio source,
press AirPlay .
• To switch the USB audio source (if
connected), press .
• To switch to the MP3 link audio source (if
connected), press .
Use advanced sound settings
If your iTunes host device is an iPod touch/
iPhone/iPad:
For advanced sound settings and additional
features, you can use your iPod touch/iPhone/
iPad to download the Philips Fidelio application
from Apple App Store. It is a free application
from Philips.
If your iTunes host device is a Wi-Fi enabled
PC/Mac:
For advanced sound settings, you can use the
equalizer available on iTunes directly ( View ->
Show Equalizer ).
Tip
• See the iTunes help documentation for more details.
DS6800W_37_UM_Book.indb 17 2011-9-14 10:53:34
18 EN
Play/charge your iPod/iPhone/
iPad through USB socket
Note
• The USB socket is only compatible with iPod/iPhone/
iPad.
You can play or charge your iPod/iPhone/iPad
through the USB socket with an Apple USB
cable (not supplied).
1 Connect an Apple USB cable (not
supplied) to:
• the USB socket on the back of
DS6800W.
• the charging port on your iPod/iPhone/
iPad.
2 Press to select the USB source.
Compatible iPod/iPhone/iPad
The USB socket supports play and charge of
the following iPod, iPhone, and iPad models.
• iPad 2
• iPad
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• iPod classic
• iPod 5G
• iPod 4G
• iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation)
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
Play from an external device
You can also listen to an external audio player
through DS6800W.
1 Connect the supplied MP3 link cable to:
• the MP3-LINK socket on the back of
DS6800W.
• the headphone socket on an external
audio player.
2 Press to select the MP3 link source.
MP3-LINK
DS6800W_37_UM_Book.indb 18 2011-9-14 10:53:36
19
English
EN
6 Update
firmware
To improve the performance of DS6800W,
Philips may offer you new rmware for upgrade
of your DS6800W.
Please register your product at www.philips.
com/welcome for information about the latest
rmware.
Note
• You can only update the rmware from a PC/Mac.
Download the update le
1 On your PC/Mac, go to www.philips.com/
support.
2 Enter the model number to nd the latest
rmware upgrade le available.
3 Save the upgrade le to your hard drive.
Update from the
con guration page
Warning
• Always connect your DS6800W to AC power for
rmware upgrade. Never power off your DS6800W
during rmware upgrade.
www.philips.com/support
XXXX
XXXX. zip
Note
• To use an Internet browser other than Apple Safari
on your PC/Mac, remember to go to the Wi-Fi router
con guration page and write down the IP address of
your DS6800W. See the user manual of your Wi-Fi
router for how to nd the IP addresses of devices
connected to the Wi-Fi router.
1 Power on DS6800W (see 'Prepare' on
page 7 ) .
» It takes about 35 seconds for the unit
to boot up. During boot-up, the WI-FI
SETUP indicator on the back of the
main speaker blinks green quickly.
» After boot-up, you can hear a beep
and the WI-FI SETUP indicator
turns to green steadily. DS6800W is
connected to the last con gured Wi-Fi
network automatically.
2 Make sure that DS6800W and your PC/
Mac are connected to the same Wi-Fi
router.
3 Open Apple Safari on your PC/Mac, then
select 'Philips_Fidelio XXX' from the
Bonjour pull-down list.
• Or open another Internet browser
on your PC/Mac, then type in the IP
address of DS6800W (available on the
Wi-Fi router con guration page) at the
address bar.
» The DS6800W con guration web
page is displayed.
4 Select the Firmware Update tab, then
follow the on-screen instruction to
complete the rmware update.
Note
• In case the rmware update fails, you can try the above
procedures again.
• After successful rmware update, if there is any
problem with the Wi-Fi connection, press and hold
on DS6800W for more than 5 seconds at the same
time to reset the device, and then try to set up the Wi-
Fi network for DS6800W again (see 'Connect to your
home Wi-Fi network for AirPlay' on page 9 ) .
DS6800W_37_UM_Book.indb 19 2011-9-14 10:53:37
20 EN
7 Product
information
Note
• Product information is subject to change without prior
notice.
Speci cations
Ampli er
Rated Output
Power 2 X 25 W RMS
Frequency
Response 63 - 1800 Hz
Signal to Noise
Ratio > 90 dB
MP3 Link 650 mV RMS 20 kohm
Speakers
Speaker
Impedance Woofer: 8 ohm
Tweeter: 8 ohm
Speaker
Driver 78 mm woofer + 34 mm
tweeter
Sensitivity Woofer: 83.5 dB/m/W
Tweeter: 86 dB/m/W
Wireless
Wireless
standard 802.11b/g
Wireless
security WEP (64 or 128 bit),
WPA/WPA2 (8-63 characters)
Frequency
range 2412 - 2462 MHz (CH1-
CH11) (for /79, /37, /55, /97)
2412 - 2472 MHz (CH1-
CH13) (for /12, /10, /05)
PBC (one
button push) Yes
General information
AC power Model:
GFP651DA-2028
Input: 100 - 240 V~,
50/60 Hz 1.4 A
Output: 20 V 2.8 A
Operation Power
Consumption 50 W
Dimensions
- Each speaker (W x
D x H)
145 x 145 x 263 mm
Weight
- With Packing
- Speakers
4.2 kg
2.6 kg
DS6800W_37_UM_Book.indb 20 2011-9-14 10:53:37
21
English
EN
8 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
• Make sure that the AC power plug of the
device is connected properly.
• Make sure that there is power at the AC
outlet.
No sound
• Adjust the volume.
• Check the network connection. Set up the
network again if needed (see 'Connect to
your home Wi-Fi network for AirPlay' on
page 9 ) .
• Check if you have selected the correct
audio source.
No response from the unit
• Press and hold on DS6800W for more
than 5 seconds to reset the device. Then
set up the Wi-Fi network for DS6800W
again (see 'Connect to your home Wi-Fi
network for AirPlay' on page 9 ) .
• Disconnect and reconnect the AC power
plug, and then switch on the device again.
Remote control does not work
• Before you press any function button, rst
select the correct source with the remote
control instead of the main unit.
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/–
signs) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the IR
sensor on the front of the main speaker.
Wi-Fi network connection failed
• Check if your Wi-Fi router is Wi-Fi 802.11b/g
certi ed. This device is only compatible with
Wi-Fi 802.11b/g certi ed routers.
• If your Wi-Fi router is Wi-Fi 802.11n
certi ed, make sure to enable the 802.11b/g
mode. DS6800W does not support
connection to routers with 802.11n only.
• This device does not support the WPS-
PIN method.
• If your Wi-Fi router supports WPS and
the WPS-PBC method but fails to connect
to DS6800W, try the manual Wi-Fi setup
method (see 'Scenario 2: Connect to a
non-WPS router' on page 10 ) .
• Enable SSID broadcast on the Wi-Fi router.
• Keep away from potential sources of
interference which may affect Wi-Fi signal,
such as microwave ovens.
• If you fail to use your PC for Wi-Fi network
setup, check whether your PC is using a
Wi-Fi network. You cannot use Ethernet
connection for AirPlay network setup.
• Make sure that the SSID name of your
home router consists of alphanumeric
characters, with no space or special
characters like %/#/* inserted.
• If you choose to rename the AirPlay device
' Philips_Fidelio XXXX ' in the setting menu,
do not use special characters or symbols.
• For some new types of Wi-Fi routers, a
network name (SSID) may be created
automatically when you use WPS for
connection. Always change the default
network name (SSID) to a simple one that
consists of alphanumerical characters, and
also change the Wi-Fi security mode to
secure your network.
DS6800W_37_UM_Book.indb 21 2011-9-14 10:53:38
22 EN
Occasional breaking of AirPlay music
streaming
Do one or all of the following:
• Move DS6800W closer to your Wi-Fi
router.
• Remove any obstacles between DS6800W
and your Wi-Fi router.
• Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
• Check if your network speed is fast enough
(in cases where multiple devices share the
same router, the AirPlay performance may
be affected). Turn off the other devices
connected to your home router.
• Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
• Turn off other Wi-Fi routers.
No AirPlay icon on my iTunes host device
• Make sure that DS6800W is already
connected to your home Wi-Fi network.
• Before you open iTunes, make sure that
you have enabled Bonjour service in
your PC. Take Windows XP for example:
to enable the service, you can click
Start -> Control Panel , and double-click
Administrative Tools -> Services -> Bonjour
Service , then click Start followed by OK
on the pop-up menu.
• If the problem remains, try to restart
DS6800W.
AirPlay connection failed with Mac or PC
• Temporarily disable the rewall and
security software to see whether it blocks
the ports that AirPlay uses to stream
content. See the help documentation of
your rewall and security software on how
to unblock the ports used by AirPlay.
• When you use iPod Touch/iPhone/iPad/
Mac/PC for AirPlay, if the music play breaks
or stops, try to restart your iPod Touch/
iPhone/iPad, iTunes or DS6800W.
• Video streaming or FTP downloads may
overload your router and therefore may
cause interruptions during AirPlay music
play. Try to reduce the load of your router.
DS6800W_37_UM_Book.indb 22 2011-9-14 10:53:38
Register online at www.philips.com/welcome today to
get the very most from your purchase.
Visit our World Wide Web Site at http://www.philips.com/welcome
Registering your model with PHILIPS makes you eligible for all of the valuable benets listed below,so don't miss out.
Register online at www.philips.com/welcome to ensure:
*Product Safety Notication *Additional Benefits
By registering your product, you'll receive notication - directly
from the manufacturer.
Registering your product guarantees that you'll receive all of
the privileges to which you’re entitled, including special money-
saving offers.
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No.__________________________
Serial No. ________________________
Know these
safetysymbols
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your condence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today.We’ll do every-
thing in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties in the industry.
What’s more, your purchase guar antees you’ll receive all the
information and special offers for which you qualify, plus easy access
to accessories from our convenient home shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
P.S. To get the most from your PHILIPS purchase, be
sure to register online at:
www.philips.com/welcome
DS6800W_37_UM_Book.indb 23 2011-9-14 10:53:38
PHILIPS LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
PHILIPS warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
Philips warrants the product to the original purchaser or the per-
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
The Philips warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received by Philips
within the Warranty Period. At its option, Philips will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in Philips current inventory,
or (3) refund the original purchase price of the product.
Philips warrants replacement products or parts provided under
this warranty against defects in materials and workmanship from
the date of the replacement or repair for ninety (90) days or for
the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes Philips’ property. When a refund
is given, your product becomes Philips’ property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products manu-
factured by or for Philips that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any non-Philips hardware product or any software, even
if packaged or sold with the product. Non-Philips manufacturers,
suppliers, or publishers may provide a separate warranty for their
own products packaged with the bundled product.
Philips is not liable for any damage to or loss of any programs,
data, or other information stored on any media contained within
the product, or any non-Philips product or part not covered by
this warranty. Recovery or reinstallation of programs, data or
other information is not covered under this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
Philips or Philips Authorized Service Location, (c) to a product or
a part that has been modified without the written permission of
Philips, or (d) if any Philips serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product to Philips.
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of Philips.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product to Philips.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO
RICO, OR U.S. VIRGIN ISLANDS…
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477)
TO OBTAIN ASSISTANCE IN CANADA…
1-800-661-6162 (French Speaking)
1-888-PHILIPS (1-888-744-5477) - (English or Spanish
Speaking)
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
3140 035 50201
Philips, P.O. Box 10313 Stamford, CT 06904
DS6800W_37_UM_Book.indb 24 2011-9-14 10:53:38
Specifications are subject to change without notice
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 000000000000
DS6800W_37_UM_Book.indb 76 2011-9-14 10:54:06