Table of Contents
Philips PPX4350/INT User Manual
Displayed below is the user manual for PPX4350/INT by Philips which is a product in the Data Projectors category. This manual has pages.
Related Manuals
PPX 4350
EN User Manual
Register your product and get support at
www.philips.com/welcome
PPX4350_UM_EN_253624544.book Page 1 Jeudi, 29. janvier 2015 11:35 11
2Philips · PPX 4350
Table of contents
Dear Customer ....................................................................3
About this User Manual ......................................................3
What's in the Box ................................................................3
Product Highlights ............................................................... 3
WiFi Display (Miracast compatible) .................................3
General Safety Information .....................4
Setting up the Device ..........................................................4
Power Supply ........................................................................4
Repairs ....................................................................................5
Overview ...................................................6
Top of the Device ................................................................6
Side View ................................................................................6
Bottom of the Device .........................................................6
Overview of the Menu Functions .....................................7
Symbols in the Statusbar ....................................................7
Initial Operation .......................................8
Setting up the Device ..........................................................8
Connect Power Supply / Charge Battery ....................... 8
Initial Installation ...................................................................8
Connect to the Playback Device .............9
Connecting to Devices with HDMI Output ..................9
Connecting the headphones ..............................................9
Memory ...................................................10
Inserting a Memory Card .................................................10
Connecting USB Storage Medium ..................................10
Miracast ...................................................11
Bluetooth .................................................12
Activating the Bluetooth connection .............................12
Deactivating the Bluetooth connection ........................12
Delete pairing ......................................................................12
Media Playback .......................................13
Video playback ....................................................................13
Photo Playback ...................................................................14
Music Playback ....................................................................14
Managing Files .....................................................................15
Settings ....................................................16
Overview of the Menu Functions ...................................16
+ functions ...............................................17
Flashlight ...............................................................................17
SOS Light .............................................................................17
Warning Light ..................................................................... 17
Service ..................................................... 18
Care Instructions for the Battery .................................. 18
Battery deep discharge ..................................................... 18
Cleaning ............................................................................... 19
Device Overheated ........................................................... 19
Update Firmware with SD Memory Card
or USB key ..........................................................................19
Troubleshooting ................................................................. 21
Appendix .................................................23
Technical Data ....................................................................23
Accessories .........................................................................23
PPX4350_UM_EN_253624544.book Page 2 Jeudi, 29. janvier 2015 11:35 11
3
Dear Customer
Thank you for purchasing our Pocket Projector.
We hope you enjoy your device and its many functions!
About this User Manual
With the installation guide on the following pages, you
can start using your device quickly and easily. Detailed
descriptions can be found in the following sections of
this user manual.
Read the entire user manual carefully. Follow all safety
instructions in order to ensure proper operation of
your device. The manufacturer accepts no liability if
these instructions are not followed.
Symbols Used
What's in the Box
1 – PicoPix Projector
2 – HDMI to mini HDMI cable
3 – Quick Start Guide
Product Highlights
Connecting to devices with HDMI output
With the HDMI to mini HDMI cable you can connect
the projector to a computer or laptop (see also Con-
necting to Devices with HDMI Output, page 9).
WiFi Display (Miracast
compatible)
With the Miracast™ solution you can display video
between Wi-Fi devices, without cables or a network
connection. You can do things like view pictures or vid-
eos from a smartphone (Android 4 and more) or laptop
(Windows 8.1) on your pocket projector.
Notice
Troubleshooting
This symbol designates tips that will help you
to use your device more effectively and easily.
CAUTION!
Damage to the Device or Loss of Data!
This symbol gives warning of damage to the
device and possible loss of data. This damage
can result from improper handling.
DANGER!
Danger to Persons!
This symbol gives warning of danger to per-
sons. Physical injury or damage can result
from improper handling.
Notice
Not all devices will be compatible with WiFi
Display.
WiFi Display will not work with iOS devices.
b
ac
PPX4350_UM_EN_253624544.book Page 3 Jeudi, 29. janvier 2015 11:35 11
4Philips · PPX 4350
1 General Safety Information
Do not make any changes or settings that are not
described in this user manual. Physical injury or damage
to the device or loss of data can result from improper
handling. Take note of all warning and safety notes indi-
cated.
Setting up the Device
The unit is for indoor use only. The device should be
placed securely on a stable, flat surface. Position all
cables in such a way that no one will stumble on them,
thus avoiding possible injuries to persons or damage to
the device itself.
Do not plug in the device in moist rooms. Never touch
the mains cable or the mains connection with wet
hands.
The device must have sufficient ventilation and may not
be covered. Do not put your device in closed cabinets
or boxes.
Do not place the machine on soft surfaces such as table-
cloths or carpets and do not cover the ventilation slits.
Otherwise the device could overheat or catch fire.
Protect the device against direct sunlight, heat, large
temperature fluctuations and moisture. Do not place
the device in the vicinity of heaters or air conditioners.
Observe the information on temperature and humidity
in the technical data.
When the device is running for a long period of time,
the surface becomes hot and a warning symbol appears
on the projection. The device switches automatically to
stand-by mode when it gets too hot. After the device
has cooled down, you can continue playback by pressing
any key.
Do not allow liquids to enter into the device. Switch off
the device and disconnect it from the mains supply if liq-
uids or foreign substances end up inside the device.
Have the unit inspected by a technical service depart-
ment.
Always handle the unit with care. Avoid touching the
lens. Never place heavy or sharp objects on the projec-
tor or the power cable.
If the projector gets too hot or emits smoke, shut it
down immediately and unplug the power cable. Arrange
for your device to be investigated by a technical service
centre. To prevent the spread of fire, open flames
should be kept away from the device.
Under the following conditions, a layer of moisture can
appear inside the device which can lead to malfunctions:
• if the device is moved from a cold to a warm
area;
• after a cold room is heated;
• when this device is placed in a damp room.
Proceed as follows to avoid any moisture build-up:
1Seal this device in a plastic bag before moving it to
another room, in order for it to adapt to room con-
ditions.
2Wait one to two hours before you take the device
out of the plastic bag.
The device should not be used in a very dusty environ-
ment. Dust particles and other foreign objects may
damage the unit.
Do not expose the device to extreme vibrations. It may
damage the internal components.
Do not allow children to handle the device without
supervision. The packing materials should be kept out of
the hands of children.
Power Supply
Use only the enclosed power adapter (see chapter
Appendix / Technical Data). Check whether the mains
voltage of the power supply matches the mains voltage
available at the setup location. This equipment complies
with the voltage type specified on the unit.
The capacity of the battery diminishes with time. If the
device functions only with the power supply, the battery
is defective. Contact an authorised service centre to
replace the battery.
Do not try to replace the battery yourself. Incorrect
handling of the battery or using the wrong type of bat-
tery can cause damage to the device or cause injury.
Switch the device on or off using the power switch
before removing the power supply from the socket.
Turn off the device and remove it from the power sup-
ply before cleaning the surface. Use a soft, lint-free
cloth. Never use liquid, gaseous or easily flammable
cleansers (sprays, abrasives, polishes, alcohol). Do not
allow any moisture to reach the interior of the device.
DANGER!
Risk of explosion with incorrect type of
batteries
Do not try to replace the battery yourself.
There is a risk of explosion if the incor-
rect battery type is used.
DANGER!
High Power LED
This device is equipped with an high power
LED (Light Emitting Diode), which emits very
bright light. Do not look directly into the pro-
jector lens. This could cause eye irritation or
damage.
DANGER!
Danger of hearing damage
Do not use the device over a longer time at
high volume – especially when using head-
phones. This could lead to the risks of hearing
damage.
PPX4350_UM_EN_253624544.book Page 4 Jeudi, 29. janvier 2015 11:35 11
General Safety Information 5
Repairs
Do not repair the device yourself. Improper mainte-
nance can result in injuries or damage to the device.
Your device must be repaired by an authorised service
centre.
Find details of authorised service centres on the war-
ranty card.
Do not remove the type label from your device; this
would void the warranty.
PPX4350_UM_EN_253624544.book Page 5 Jeudi, 29. janvier 2015 11:35 11
6Philips · PPX 4350
2Overview
Top of the Device
1 – USB cable
USB connection for a computer / port for power
supply
USB connection for a USB storage medium
2 – Focus wheel for image sharpness.
3 – OK key
à–Confirm entry / start, stop video/music play-
back or slideshow.
4 – Navigation keys
/ – Navigating / during music playback select
previous, next title when image display is switched
off / during video/picture playback wake Quick set-
ting bar.
À/Á – Navigating / during music playback: adjust
volume level / during video playback start forward or
backward / during picture playback select previous,
next picture
5 – keys
– One menu step back, one directory level
back / cancelling a function
Side View
1 – Loudspeak (on the other side)
2 – – HDMI port for a playback device (with
adapter cable)
3 – – Memory card slot (Micro SD/
SDHC)
4 – Ã – On/Off switch
5 – Ï – Audio output – headphone connection or
connection for external speakers
6 – Battery status monitor
Charge indicator with connected power supply:
Red: Charging battery
Green: battery is fully charged
Bottom of the Device
1 – Tripod socket
Notice
Note that the distance to the projection sur-
face must be a minimum of 0.3 meters and a
maximum of 2.1 meters. If the Pocket Projec-
tor is located outside of this range, it may not
be possible to focus the image. Turn the focus
wheel carefully so as to avoid damaging the
lens.
a
c
b
e
d
b
adc
e
a
PPX4350_UM_EN_253624544.book Page 6 Jeudi, 29. janvier 2015 11:35 11
Overview 7
Overview of the Menu
Functions
1After switching on the device the main menu
appears.
2Select the desired menu using the navigation keys
/, À/Á.
3Confirm with à.
4By pressing the key you will return to the main
menu.
Source – Switch to the external video input HDMI
or select WiFi (if WiFi dongle connected)
Videos – Selecting files for video playback
Pictures – Selecting files for the slideshow
Music – Selecting music files for playback
Extras – Access + and configure settings the Pocket
Projector
Folder View – Selecting files for Playback. Copy or
Delete Files (Mark the files with Á and confirm
using à).
Symbols in the Statusbar
1 – WLAN status display
2 – Mode ECO
3 – Folder
4 – USB storage medium
5 – Bluetooth
6 – Charge level of the internal battery. The icon will
be red, when the battery needs to be recharged.
Folder View Music Extras
SourceVideos Pictures
P
i
c
t
u
r
e
s
352461
PPX4350_UM_EN_253624544.book Page 7 Jeudi, 29. janvier 2015 11:35 11
8Philips · PPX 4350
3 Initial Operation
Setting up the Device
A tripod accessory is available to elevate the device, see
the paragraph “Accessories” page 23.
Connect Power Supply /
Charge Battery
1Connect the USB plug to a computer, to charge the
battery.
Alternatively you may connect the USB plug to the
power adapter (not included), we recommend using
the accessory PPA6200. Charge time is faster for to
charge the battery.
Initial Installation
1Switch the device on using the on/off switch on the
side.
2Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.3 meters and a max-
imum of 2.1 meters. Make sure the projector is in a
secure position.
3Use the focus wheel on the top to adjust the image
sharpness.
4Select the desired menu language using /.
5Confirm with à.
CAUTION!
Mains Voltage at the Site of Installation!
Check whether the mains voltage of the
power supply matches the mains voltage avail-
able at the setup location.
Notice
The Main Menu Appears Instead of
the Language Selection
The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
1Use the navigation keys to select Extras.
2Confirm with à.
3Select with / Language/Lan-
guage.
4Confirm with à.
5Select the desired language with /.
6Confirm with à.
7Exit with .
PPX4350_UM_EN_253624544.book Page 8 Jeudi, 29. janvier 2015 11:35 11
Connect to the Playback Device 9
4 Connect to the Playback Device
Only use the supplied cable or cables that are available
as accessories to connect the projector.
Cables available as accessories
Mini Display port cable ............. (PPA1270 / 253520069)
MHL cable .................................... (PPA1240 / 253520048)
Connecting to Devices with
HDMI Output
Use the HDMI to mini HDMI cable to connect the pro-
jector to a computer or laptop.
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Connect the HDMI cable to the projector's HDMI
socket.
4Connect the cable to the mini-HDMI socket of the
playback device.
5Use the navigation keys to select Source.
6Confirm with à.
7Use the navigation keys to select HDMI.
8Confirm with à.
9The connection is automatically activated.
For exit the function, press .
Connecting the headphones
1Before connecting the headphones, turn down the
volume on the device.
2Connect the headphones to the projector's head-
phone slot. The device speakers deactivate automat-
ically when the headphones are connected.
3After connecting the headphones, increase the vol-
ume to a comfortable level.
Folder View Music Extras
SourceVideos Pictures
P
i
c
t
u
r
e
s
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume – especially when using head-
phones. This could lead to the risks of hearing
damage. Before connecting the headphones,
turn down the volume on the device. After
connecting the headphones, increase the vol-
ume to a comfortable level.
PPX4350_UM_EN_253624544.book Page 9 Jeudi, 29. janvier 2015 11:35 11
10 Philips · PPX 4350
5Memory
Inserting a Memory Card
1Insert a memory card with the contacts facing down-
wards into the slot at the side of the
device. Your device supports the following memory
cards: Micro SD/SDHC.
2Insert the memory card into the slot until it snaps
into position.
3Press lightly on the memory card to remove it.
4The memory card is ejected.
Connecting USB Storage
Medium
1Connect the USB storage medium to the USB cable
of the device.
DANGER!
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Switch the device off in order to make sure
that the device does not access the mem-
ory card.
PPX4350_UM_EN_253624544.book Page 10 Jeudi, 29. janvier 2015 11:35 11
Miracast 11
6 Miracast
1Switch the device on using the on/off key.
2After the initial screen the main menu appears.
3Use the navigation keys to select Source.
4Confirm with à.
5Use the navigation keys to select WiFi Display.
6Confirm with à.
7Connect the external device (smartphone or tablet)
to the same WiFi network that the projector.
8Select on the WifiDisplay application of the external
device the name of the projector connection (in the
example Screeneo_5f31).
9Connect the external device (smartphone or tablet)
to the projector, it will show up connecting.
10 Wait connecting until external device show “con-
nected” with the projector, and also projector is
showing the screen of external device.
For exit the function, press .
Notice
Only the Miracast-certified devices can be
used with this function.
Notice
The projector must be connected to a
WiFi network.
Notice
The name used to identify the projector
can be modified in the Setting menu.
PPX4350_UM_EN_253624544.book Page 11 Jeudi, 29. janvier 2015 11:35 11
12 Philips · PPX 4350
7 Bluetooth
Activating the Bluetooth
connection
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select Bluetooth.
6Confirm with à.
7Use À/Á// to select On.
8Confirm with à.
9A search is launched for find the available devices.
10 Select your device.
11 Use the navigation keys to select start pairing &
connect.
Pairing is launch.
12 If necessary enter the passcode with the keys À/
Á// (code by default: 0000 or 1234) and
confirm with à.
13 The device name appears on screen.
You can play movies, photos, listen to music from the
paired device.
Deactivating the Bluetooth
connection
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select Bluetooth.
6Confirm with à.
7Use À/Á// to select Off.
8Confirm with à.
Delete pairing
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select Bluetooth.
6Confirm with à.
7The list of paired devices, use the navigation keys for
select the device that you want deleted.
8Confirm with à.
9Use À/Á to select delete pairing.
10 Use / to select Yes
11 Confirm with à.
Notice
Activate the Bluetooh connection from
the device you want to pairing.
Folder View Music Extras
SourceVideos Pictures
P
i
c
t
u
r
e
s
PPX4350_UM_EN_253624544.book Page 12 Jeudi, 29. janvier 2015 11:35 11
Media Playback 13
8 Media Playback
Video playback
Video Playback (USB / MICRO SD
/ Internal Memory)
1Switch the device on using the on/off on the side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Videos.
4Confirm with à.
5 With connected memory: Using the keys /
select the internal memory, the USB storage
medium or the memory card.
6Confirm with à.
7Use / to select the video file that you wish to
play.
8Press à to start playback.
9Press to end the playback and return to the
overview.
10 When you press again, you will return to the
main menu.
During playback you can access different settings (vol-
ume, smart settings, contrast, brightness, saturation)
use / to select the desired setting and À/Á to
finalize your settings.
File Format
There are various video file formats as *.mov, *.avi,
*.m4v. Many of these formats function as a container
that contains the various encoded audio and video files.
MPEG-4, H.264, MP3, and AAC are all examples of
encoded audio/video files. In order to play these files,
the projector must read them and decode the audio/
video signals.
Please note that some files cannot be played as a result
of different video and audio encoders.
Supported file formats
Video Playback (Mini-HDMI
Socket)
1Connect the HDMI output of the external device to
the Pocket Projector's socket.
2Start the video playback on the external device.
To change the currently playing sound, press / to
select Volume and press À/Á to increase or
decrease the volume.
Modify settings during playback
1Press the or key, Volume appears.
2Use the / keys to choose from the following
settings:
Volume: Adjust volume level
Smart Settings: Select predefined settings for Natu-
ral / Cinema / Manual / Standard / Vivid
Saturation: Adjust colour saturation
Contrast: Adjust contrast
Brightness: Adjust brightness
3Modify the setting using À/Á.
The device saves the modified settings automatically.
Notice
Best Settings for Optimal Use
Read the informations on the best settings in
the chapter settings (see also Settings,
page 16) for optimal use of your device.
Notice
Displaying Video Files
Only compatible video with the Pocket
Projector will be displayed.
Container Video format
*.avi XVID; MPEG-4; H.264;
MJPEG
*.mov MPEG-4; H.264;H.263
*.mp4 MPEG-4; H.264;H.263
*.mkv XVID; MPEG-4; H.264;
MJPEG
*.ts H.264
*.m2ts H.264
*.3gp H.263
*. lvr MPEG-4; H.264;H.263
PPX4350_UM_EN_253624544.book Page 13 Jeudi, 29. janvier 2015 11:35 11
14 Philips · PPX 4350
Photo Playback
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Pictures.
4Confirm with à.
5 With connected memory: Using the keys /
select the internal memory, the USB storage
medium or the memory card.
6Confirm with à.
7Thumbnail photos are displayed on the screen as an
overview.
8Use À/Á or / to select the image that you
want to start the slide show with.
9Press à to start the slide show.
10 Press à to pause the slide show.
11 Press to end the slide show and return to the
overview.
During playback, you can also:
• Press à, then for to stop playback, restart
with .
• Press à, then for to rotate the image by
steps of 90°.
• Press à, then for to resize the image, max-
imum x4.
Slide Show with Background
Sound
1Start the slide show.
2Press à, to activate the menu bar, use À/Á to
select and confirm with à.
3Use À/Á or / to select your music on
numeric support.
4If no input is made, the menu bar is hidden after
5 seconds.
Music Playback
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Music.
4Confirm with à.
5 With connected memory: Using the keys /
select the internal memory, the USB storage
medium or the memory card.
6Confirm with à.
7Use / to select the file that you wish to play.
8Press à to start playback.
9Press à to stop or continue playback.
During playback you can access different settings (vol-
ume, smart settings, contrast, brightness, saturation)
use / to select the desired setting and À/Á to
finalize your settings.
Notice
Thumbnail or List
In the settings, you are able to select
whether the overview will be displayed as
miniatures or in a list.
Notice
Many Photos on the Memory Card or
the USB Medium
If there are a lot of photos on the memory
card or the USB storage medium it can
take a moment before the overview
appears.
Notice
Storage Location
Only files from the Memory Card /SB Stor-
age Medium can be played.
Notice
Switch off the Image Playback
You can turn off image playback while playing
music in order to save power (see also Music
settings, page 16). As soon as you press the
key, the image reappears and the fan
starts again.
Notice
Navigating when Image Playback is
Switched off
Press / to skip to the previous or
next song.
Press à to stop or continue playback.
Press to return to the selection.
PPX4350_UM_EN_253624544.book Page 14 Jeudi, 29. janvier 2015 11:35 11
Media Playback 15
Managing Files
Copy Files
You can copy files back and forth from the internal
memory to the connected USB storage medium or
memory card.
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Folder View.
4Confirm with à.
5 With an inserted memory card or USB stor-
age device: Select the internal memory, the USB
storage medium or the memory card using the keys
/.
6Confirm with à.
7Use / to select the file that you want to copy.
8Mark the file using Á. Pressing the key again dese-
lects the chose file(s).
9Use / to select other files.
10 Press à.
11 Select with / Copy.
12 Confirm with à.
13 Use / to select the destination memory: SD
card, internal memory or USB storage medium.
14 Confirm with à.
15 The files are copied.
Delete Files
You can delete files from the internal memory, the con-
nected USB storage medium or the memory card.
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Folder View.
4Confirm with à.
5 With connected memory: Using the keys /
select the internal memory, the USB storage
medium or the memory card.
6Confirm with à.
7Use / to select the file that you want to delete.
8Mark the file using Á. Pressing the key again dese-
lects the chose file(s).
9Use / to select other files.
10 Press à.
11 Select with / Delete.
12 Confirm with à.
13 Use / if you want to delete the files or cancel
the deletion process.
14 Confirm with à.
Notice
No Files Found (0 files)
Only compatible files with the Projector
will be displayed.
Notice
Mark the Entire Folder
You can also mark an entire folder to copy
all files from the folder. Note that the copy
process of large folders can takes some
time.
Notice
Files Already Exist
If the files you are copying already exist in
the target folder, you must choose
whether or not you want to overwrite
them using / and à. If you choose
not to overwrite these files, copies will be
created. The copies can be recognised by a
number added to the file names.
Notice
Error
If errors occur during the copying process,
make sure that enough free space is availa-
ble on the medium.
Removing Storage Medium
Only remove the storage medium after the
copy process is complete.
Notice
No Files Found (0 files)
Only compatible files with the Projector
will be displayed.
Notice
Error
If errors occur during the deletion pro-
cess, make sure that the storage medium is
not write-protected.
PPX4350_UM_EN_253624544.book Page 15 Jeudi, 29. janvier 2015 11:35 11
16 Philips · PPX 4350
9Settings
1Switch the device on using the on/off switch on the
side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use / to select from the following settings.
6Confirm with à.
7Modify the settings using à, /,
8Confirm with à.
The key takes you one step back in the menu.
Overview of the Menu
Functions
Image settings
Wall paper – Select background images
Fit Screen – Convert videos and images to Original,
Optimal or Zoom resolution
Projection mode
Front – Normal projection; the device is located
in front of the projection surface/screen
Rear – Rear projection; the device is located
behind the projection surface; the image is
reflected horizontally.
Rear ceiling – The device is located behind the
projection surface, hanging from the ceiling in an
upside-down position; the image is rotated
through 180 degrees and reflected horizontally.
Ceiling – The device is hanging from the ceiling in
an upside-down position; the image is rotated
through 180 degrees.
Wall color correction – Colour correction of the
projected image to adjust to coloured projection
surfaces
Smart Settings – Select predefined settings for
brightness / contrast / colour saturation. If you mod-
ify these settings, the setting is switched to Stand-
ard.
Brightness – Adjust brightness
Contrast – Adjust contrast
Saturation - Adjust saturation
Sound Settings:
Volume – Adjust the volume
Bass – Set the playback of the low frequencies
Treble – Set the playback of the high frequencies
Key beep – Turn key tones on and off
Video settings
View – Display all videos in a list or a corresponding
folder structure on the drive.
Repeat – Set the repeat type for video files: Repeat
deactivated (Off), repeat all videos in a directory
(Directory), repeat only the current video (Movie),
repeat all videos (All).
Resume play – If this function is activated, playback
will continue at the position it was last stopped. If
deactivated, playback will always start at the begin-
ning of the video.
Music settings
View – Show all tracks in a list or a corresponding
folder structure on the drive.
Screen – Activate or deactivate the projection dur-
ing playback.
Repeat – Set the repeat type for music files: Repeat
deactivated (Off), repeat all songs in a directory
(Directory), repeat only the current song (Song),
repeat all songs (All).
Shuffle – Activate this function for random playback.
Otherwise, playback will take place in sequence.
Picture settings
View – Display the images as a thumbnail or as a list
during selection in the main menu.
Time per slide – Image viewing time during slide
show
Repeat – Set the type of repeat for slide show pho-
tos: Repeat off (Off), repeat all photos in the direc-
tory (Directory), repeat all stored photos (All).
Slide transition – Set image transitions
Slideshow order – Play slide show in order or ran-
domly
Power Save
Brightness mode
Optimal: the brightness according to your set-
tings.
ECO mode: this function reduces the light out-
put in order to increase the operating time for
the built-in battery. When operating from the
power supply, the energy saving mode is always
deactivated in order to ensure the best-possible
image display.
Sleep mode – With this function, the projector
automatically shuts down after a specified period of
time or at the end of a movie.
Auto demo mode – Switching demo mode on and off.
In this mode, Pocket Projector is continuously displayed
on the screen and video and/or audio files placed in in-
ternal memory are read directly.
Bluetooth – Enables the function and select the Blue-
tooth device.
Language – Select the desired language for the menu.
Maintenance
Reset settings – Reset settings to factory defaults.
Firmware Update – Update Firmware
Information – Display free space in the internal
memory and information on the device (Capacity: /
Free space: / Firmware version: / Device name: /
Model: / MCU Version:)
Notice
Connect for the duration of the firmware
update the power adapter.
PPX4350_UM_EN_253624544.book Page 16 Jeudi, 29. janvier 2015 11:35 11
+ functions 17
10 + functions
Functions are available for you to use your projector as
a pocket flashlight, emitting a flash, SOS or warning light.
Flashlight
Allows to use the Pocket Projector as
a flashlight.
1Switch the device on using the on/off on the side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select Flashlight.
6Confirm with à.
7The flashlight is activated.
8For exit the function, press .
or
1Switch the device on using the on/off on the side.
2After the initial screen the main menu appears.
3Pressing the key for 2 seconds to activate the
flashlight.
4Disable the flashlight as soon as the key is
release.
SOS Light
Your Pocket Projector is equipped
with an SOS Light function. The
flashes are issued according to the rule
Morse 3 short, 3 long, 3 short. Your
equipment can not be considered as
approved rescue beacon.
1Switch the device on using the on/off on the side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select SOS Light.
6Confirm with à.
7The SOS Light is activated.
8For exit the function, press .
Warning Light
Your Pocket Projector can emit a red
or orange flash. This flash can be seen
more than 50 meters.
1Switch the device on using the on/off on the side.
2After the initial screen the main menu appears.
3Use the navigation keys to select Extras.
4Confirm with à.
5Use the navigation keys to select Warning Light.
6Confirm with à.
7The Warning light is activated.
8For exit the function, press .
CAUTION!
These functions use a lot of energy, make sure
your battery is charged before using them.
The SOS Light can not be considered as an
emergency beacon.
PPX4350_UM_EN_253624544.book Page 17 Jeudi, 29. janvier 2015 11:35 11
18 Philips · PPX 4350
11 Service
Care Instructions for the
Battery
The capacity of the battery diminishes with time. You
can prolong the life of the battery if you observe the fol-
lowing points:
• Without a power supply, the device operates
from the built-in battery. When the battery does
not have sufficient capacity, the device turns off.
Connect the device with USB cable on an USB
port.
• When the battery does not have sufficient capac-
ity, the battery symbol in the display becomes
red.
• When the device is running for a long period of
time, the surface becomes hot and a warning
symbol appears on the projection. The device
behaves as follows:
1 The fan turns to maximum level.
2 At maximum level of brightness the overheat
symbol appears in the status bar and the device
turns automatically to minimum level of bright-
ness.
3 At minimal level of brightness the overheat
symbol shows for three seconds in the middle
of the screen. Then the device turns off auto-
matically.
After the device has cooled down, you can con-
tinue playback.
• Use the device at least once a week.
• Charge the battery regularly. Don’t store the
device with a completely discharged battery.
• If the device is not used for several weeks, dis-
charge the battery a little by using the device
before storing it.
• If the device only works using the USB connec-
tion or with the power supply, the battery is
defective.
• Keep the device and the battery away from
sources of heat.
Battery deep discharge
When the battery is in deep discharge or the device is
not used for a longer period, proceed as followed:
1Connect the device to the power supply (see also
Connect Power Supply / Charge Battery, page 8).
The device behaves as follows:
2The device can be turned on and is ready to use after
approximately five minutes of charging time.
Battery recharge time with device off
DANGER!
Do not Replace the Battery Yourself
Do not try to replace the battery yourself.
Incorrect handling of the battery or using the
wrong type of battery can cause damage to
the device or cause injury.
Device off Device on
Connect
to a com-
puter
The indicator light
on the side of the
device turns red.
Slow charging.
When charging is
complete the indi-
cator light turns
green.
The indicator light
on the side of the
device turns red.
Middle charging.
Connect
to the
power
adapter
The indicator light
on the side of the
device turns red.
Fast charging
When charging is
complete the indi-
cator light turns
green.
Device remains
turned on.
Slow charging.
Turning on
possible
Completely
charged
Slow charging 10 minutes 5 hours
Fast charging 5 minutes 3 hours
PPX4350_UM_EN_253624544.book Page 18 Jeudi, 29. janvier 2015 11:35 11
Service 19
Cleaning
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
Device Overheated
A overheat symbol appears if the device is overheated
(see also Symbols in the Statusbar, page 7). The device
behaves as follows:
1The fan turns to maximum level.
2At maximum level of brightness the symbol appears
in the status bar and the device turns automatically
to minimum level of brightness.
3At minimal level of brightness the symbol shows for
three seconds in the middle of the screen. Then the
device turns off automatically.
After the device has cooled down, you can continue
playback.
Update Firmware with SD
Memory Card or USB key
From SD memory card
1Format the memory card in the file system FAT16 or
FAT32.
2Copy the file data of last firmware to root directory
of Micro SD memory card (Firmware name is R30+).
3Insert the SD memory card to the device and switch
the device on.
4Use the navigation keys to select Extras.
5Confirm with à.
6Use / to select Maintenance.
7Confirm with à.
8Use / to select Firmware Update.
9Confirm with à.
10 Use / to select Yes.
11 Confirm with à.
12 After around 4 minutes, the device turns off and on
again, the Language Selection screen appear, the
firmware update is now completed.
13 Check firmware version in the information menu of
the device. Press à -> Maintenance ->enter Infor-
mation page.
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat-
ing film on the lens.
Notice
Connect for the duration of the firmware
update the power adapter (see also Connect
Power Supply / Charge Battery, page 8).
DANGER!
All Data will be Deleted!
This procedure erases all your data that is
stored on the memory card.
DANGER!
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Power!
Do nut unplug the power adapter during
the firmware update.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
PPX4350_UM_EN_253624544.book Page 19 Jeudi, 29. janvier 2015 11:35 11
20 Philips · PPX 4350
From USB stick
1Format the USB stick in the file system FAT16 or
FAT32.
2Copy the file data of last firmware to root directory
of USB stick (Firmware name is MSTFLASH).
3Make sure your device is turned off.
4Insert the USB stick to the device.
5Press and simultaneously switch the device
ON.
6After that device is ON, release the .
7After around 3 minutes, the firmware update is now
completed and the device restart.
8Check firmware version in the information page of
the device. Press à -> Maintenance -> enter in
Information menu.
Notice
Connect for the duration of the firmware
update the power adapter (see also Connect
Power Supply / Charge Battery, page 8).
DANGER!
All Data will be Deleted!
This procedure erases all your data that is
stored on the USB stick.
DANGER!
Inserting an USB stick!
Never pull out the USB stick while the
device is accessing it. This could cause data
to be damaged or lost.
Power!
Do nut unplug the power adapter during
the firmware update.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
PPX4350_UM_EN_253624544.book Page 20 Jeudi, 29. janvier 2015 11:35 11
Service 21
Troubleshooting
Power Cycling
If a problem occurs that cannot be corrected with the
instructions in this user manual (see also the help
below), follow the steps given here.
1Switch the device off using the on/off switch on the
side.
2Wait at least ten seconds.
3Switch the device on using the on/off switch on the
side.
4If the problem repeats, please contact our technical
customer service or your retailer.
Problems Solutions
The Pocket Projector cannot be switched on • Connect the supplied power supply to recharge the
internal battery.
No sound • Check the sound level in the menu Extras / Sound
settings / Volume menu, adjust the volume with the
À/Á// key.
No sound from the external connected device • Check the cables to the external device
• Set the volume on the external device
• Only the original cables from the device manufac-
turer may function
Bad sound quality with your computer connection • Check if the audio cable is connected to the comput-
ers headphone socket or the line-out socket.
• The volume setting on the computer should not be
too high.
Only the initial screen appears and not the image from
the external device
• Check if the cables are connected to the right sock-
ets.
• Please check that the external device is switched on
• Check if the video output of the external device is
switched on.
Only the initial screen appears and not the image from
the connected computer
• Please make sure the HDMI cable can work nor-
mally.
• Check that HDMI cable is correctly connect to com-
puter's HDMI interface.
• Check if the resolution of the computer is set to
640x360.
Device switches turns off • When the device is running for a long period of time,
the surface becomes hot and a warning symbol
appears on the projection, see also symbols in the
status bar. The device automatically turns off when it
gets too hot. After the device has cooled down, you
can continue playback.
• When the battery does not have sufficient capacity,
the device turns off. Connect the device to the
power supply.
The device is connected to the power supply and
switches to stand-by mode
• The battery is in deep discharge. The device can be
turned on and is ready to use after approximately
five minutes of charging time (see also Battery deep
discharge, page 18).
PPX4350_UM_EN_253624544.book Page 21 Jeudi, 29. janvier 2015 11:35 11
22 Philips · PPX 4350
Devices changes from maximum level of brightness to
minimum level of brightness when the device is connect-
ed over USB to play videos.
• When the environment temperature is too high, the
devices turns automatically from maximum level of
brightness to minimum level of brightness in order to
protect the high power LED.
• Use the device with lower environment tempera-
tures.
Bad image or color quality when connecting with HDMI • Use the supplied HDMI cable (PPA1290). Third-
party cables may cause signal distortions.
Problems Solutions
PPX4350_UM_EN_253624544.book Page 22 Jeudi, 29. janvier 2015 11:35 11
Appendix 23
12 Appendix
Technical Data
Dimensions (L¦×¦H¦×¦W)........................ 97 x 17 x 54 ¦mm
Weight ............................................................................ 120 g
Recommended Ambient ........................................5¦–¦35¦ºC
Relative Humidity ..................15¦–¦85¦% (non-condensing)
File format................... *.mp4, *.avi, *.mov, *.mkv, *.mpg,
........................................... *.mpeg, *.ts, *.m2ts, *.3gp
Photo formats .................................JPEG, BMP, PNG, GIF
Music formats........................................MP3, WAV, WMA
Video Standard (CVBS)................... PAL, SECAM, NTSC
Video Standard (YPbPr)....480i/p, 576i/p, 720p, 1080i/p
Video connection ................................. Mini-HDMI socket
Headphone connection..........Stereo - jack plug: 3,5¦mm
Internal speaker ...................................................mono 1¦W
Internal memory.............................................................4¦GB
Compatible Memory Cards ..... Micro SD/SDHC/SDXC
USB host max. output power..........................5V, 220mA
Technology / optical
Display technology .......................................nHD 0,2" DLP
Light source ........................................................... RGB LED
Resolution ......................................................640¦x¦360¦Pixel
Supported Resolutions..................... VGA/SVGA/WVGA
..............................................XGA/WXGA/FULL HD
Brightness (Bright Mode).......................... up to 50 lumen
Contrast ratio .............................................................1300:1
Projected image size..........................................10¦–¦60¦inch
Screen distance ................................... 0,35¦m up to 2.12¦m
Focus ............................................................................ Manual
Focus length............................................................. 10.6 mm
Built-in rechargeable battery
Battery type .................................................................... LiPol
Capacity........................................................1800 mAh 3.7V
Charging time ..................................................................... 3¦h
Operating time............................................................65 min
Operating time (ECO mode) ............................. up to 2 h
Manufacturer ...........................................................................
.................... GREAT POWER BATTERY CO.,LTD
Accessories
Following accessories are available for your device:
MHL cable .................................... PPA1240 / 253520048
Mini Display port cable.................PPA1270 / 253520069
Power adaptor ........................ PPA6200EU / 253456003
........................................... PPA6200UK / 253461710
............................................ PPA6200US / 253495638
All data are provided for reference purposes only.
Sagemcom Documents SAS reserves the right to
make any changes without prior notice.
PPX4350_UM_EN_253624544.book Page 23 Jeudi, 29. janvier 2015 11:35 11
24 Philips · PPX 4350
The CE marking certifies that the product meets the
main requirements of the European Parliament and
Council directives 1999/5/CE, 2006/95/CE, 2004/108/
CE and 2009/125/CE on information technology equip-
ment, regarding safety and health of users and regarding
electromagnetic interference.
The declaration of compliance can be consulted on the
site www.picopix.philips.com.
Preservation of the environment as part of a sustainable
development plan is an essential concern of Sagemcom
Documents SAS. The desire of Sagemcom Documents
SAS is to operate systems observing the environment.
The desire of Sagemcom Documents SAS is to operate
systems observing the environment and consequently it
has decided to integrate environmental performances in
the life cycle of this products, from manufacturing to
commissioning use and elimination.
Federal Communications Commission (FCC)
Statement: You are cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will
not occur in a particular installation.If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference;
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
FCC RF Radiation Exposure Statement: This
transmitter must not be co-location or operating in
conjunction with any other antenna or transmitter. This
equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a
minimum distance of 7.8 inches (20 centimeters)
between the radiator and your body.
Canada Regulatory Compliance: This device
complies with Industry Canada CAN ICES-3 (B)/NMB-
3(B)
RSS-Gen & RSS-210 statement: This device
complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation of the
device.
RF Radiation Exposure statement: The device
meets the exemption from the routine evaluation limits
in section 2.5 of RSS102 and users can obtain Canadian
information on RF exposure and compliance.
This equipment should be installed and operated with a
minimum distance of 7.8 inches (20 centimeters)
between the radiator and your body.
For Mexico only.
PROYECTOR DE BOLSILLO (PicoPix)
Alimentación: 100 – 240V ~ 50/60Hz 1A
Sal: 5 Vcc/2 A
Proyector: 5 Vcc/2 A
Importador:
P&F Mexicana, SA de C.V.
AV. La Palma No 6
Col. San Fernando la Herrudara
Huixquilucan, Edo. de Mexico CP 52787
Tel: 5269 9000
HECHO EN: China
LEA CUIDADOSAMENTE ESTE INSTRUC-
TIVO ANTES DE USAR SU APARATO.
Packaging: The presence of the logo (green dot)
means that a contribution is paid to an approved
national organisation to improve package recovery and
recycling infrastructures. Please respect the sorting
rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they
must be disposed of at an appropriate collection point.
PPX4350_UM_EN_253624544.book Page 24 Jeudi, 29. janvier 2015 11:35 11
25
Product: The crossed-out waste bin stuck on the
product means that the product belongs to the family of
electrical and electronic equipment. In this respect, the
European regulations ask you to dispose of it selectively;
• At sales points in the event of the purchase of
similar equipment.
• At the collection points made available to you
locally(drop-off centre, selective collection, etc.).
In this way you can participate in the re-use and upgrad-
ing of Electrical and Electronic Equipment Waste, which
can have an effect on the environment and human
health.
The paper and cardboard packaging used can be dis-
posed of as recyclable paper. Have the plastic wrapping
recycled or dispose of it in the non-recyclable waste,
depending on the requirements in your country.
Trademarks: The mentioned references in this man-
ual are trademarks of the respective companies. The
lack of the trademarks É and Ë does not justify the
assumption that these dedicated terminologies are free
trademarks. Other product names used herein are for
identification purposes only and may be trademarks of
their respective owners. Sagemcom Documents SAS
disclaims any and all rights in those marks.
Neither Sagemcom Documents SAS nor its affiliates
shall be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred
by the purchaser or third parties as a result of accident,
misuse, or abuse of this product or unauthorized mod-
ifications, repairs, or alterations to this product, or fail-
ure to strictly comply with Sagemcom Documents SAS
operating and maintenance instructions.
Sagemcom Documents SAS shall not be liable for any
damages or problems arising from the use of any
options or any consumable materials other than those
designated as original Sagemcom Documents SAS /
PHILIPS products or Sagemcom Documents SAS /
PHILIPS approved products.
Sagemcom Documents SAS shall not be held liable for
any damage resulting from electromagnetic interference
that occurs from the use of any interface cables other
than those designated as Sagemcom Documents SAS /
PHILIPS products.
All rights reserved. No part of this publication may be
reproduced, stored in a retrieval system or transmitted
in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the
prior written permission of Sagemcom Documents SAS.
The information contained herein is designed only for
use with this product. Sagemcom Documents SAS is not
responsible for any use of this information as applied to
other devices.
This user manual is a document that does not represent
a contract.
Errors, printing errors and changes are reserved.
Copyright È 2014 Sagemcom Documents SAS
PPX4350_UM_EN_253624544.book Page 25 Jeudi, 29. janvier 2015 11:35 11
PPX 4350
EN
253624544-A
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used by Sagemcom Documents SAS under license from Koninklijke Philips N.V.
È 2014 Sagemcom Documents SAS
All rights reserved
Sagemcom Documents SAS
Documents Business Unit
Headquarters : 250, route de l’Empereur
92848 Rueil-Malmaison Cedex · FRANCE
Tel: +33 (0)1 57 61 10 00 · Fax: +33 (0)1 57 61 10 01
www.sagemcom.com
Simplified Joint Stock Company · Capital 8.479.978 € · 509 448 841 RCS Nanterre
PPX4350_UM_EN_253624544.book Page 26 Jeudi, 29. janvier 2015 11:35 11