Front Cover
Contents
IMPORTANT INFORMATION
1. Part Names
2. Introduction
- 2-1. Displaying an External Equipment Image
- 2-2. Initial Installation
3. Direct Button Operation
4. On-Screen Display Menu
5. Enjoying Photo/Music/Video Playback
6. Using LINK Operation
7. Using a PC
8. Using the Internet
9. Appendix
10. Specifications
- 10-1. Monitor (For PN-Q901 model)
- 10-2. Monitor (For PN-Q801/701/601 models)
11. Trademarks
12. Dimensional Drawings
13. Software License
Back Cover

Sharp PN-Q601E User Manual

Displayed below is the user manual for PN-Q601E by Sharp which is a product in the Signage Displays category. This manual has pages.

Related Manuals

Sharp L7010PNLSTAND1 Manual

Sharp PN-V600A Manual

Sharp PN-V601A Manual

Sharp XE-A207B Manual

Sharp PN-H701 Manual

Sharp LC70LE661U Manual

Sharp PN-E603 Manual

Contents

1. Part Names

1-1. Monitor (For PN-Q601/701/801 models)

1-2. Monitor (For PN-Q901 model)

1-3. Remote Control Unit

2. Introduction

2-1. Displaying an External Equipment Image

2-2. Initial Installation

3. Direct Button Operation

3-1. Changing Volume

3-2. MUTE

3-3. APPS

3-4. AUDIO/Sleep Timer

4. On-Screen Display Menu

4-1. Introduction

4-3. On-Screen Display Menu Operation

4-4. Menu Operation Buttons

4-5. Initial Setup

4-8. Information

4-11. Picture Settings

4-15. Audio Settings

4-16. Network Settings

4-18. System Options

5. Enjoying Photo/Music/Video Playback

5-1. Preparation

5-2. Selecting the Folders to Play Back

5-4. Playing Back Files on a USB Memory Device/Home

Network Server

6. Using LINK Operation

6-1. Controlling HDMI Equipment Using LINK Operation

6-3. Link Operation Menu

6-5. Using a Smartphone with the Monitor

7. Using a PC

7-1. Adjusting the PC Image

7-2. Setting Audio Input

7-3. Control of the Monitor

7-9. PC Compatibility Chart/AV Compatibility Chart

8. Using the Internet

8-1. Connecting to the Internet

8-2. Entering Text (Software Keyboard)

8-4. Using the Browser

8-8. Using Keyboard and Mouse

9. Appendix

9-1. Removing the Stand

9-2. Setting the Monitor on the Wall

9-6. Troubleshooting

10. Specifications

10-1. Monitor (For PN-Q901 model)

10-2. Monitor (For PN-Q801/701/601 models)

11. Trademarks

12. Dimensional Drawings

13. Software License

ENG Contents

ENG Important1

ENG Important2

ENG Important3

Part Names

Monitor (For PN-Q601/701/801 models)

(Front)

*1 See page 4-12.

*2 See page 4-22.

(Side)

* See pages 2-1 and 4-4 for button operations.

(Rear)

*1 See the Setup Guide.

And see page 6-1 for external equipment connection.

See page 7-2. for details on the Audio Select function.

See page 6-2. for details on the Audio Return Channel.

See page 6-5. for details on the MHL function.

See page 4-6. for details on the Input Select function.

The illustrations and on-screen displays in this operation manual are for explanation purposes

and may vary slightly from the actual operations.

The examples used throughout this manual are based on the PN-Q601 model.

ENG 1-1

Part Names

Monitor (For PN-Q901 model)

(Front)

*1 See page 4-12.

*2 See page 4-22.

(Side)

* See pages 2-1 and 4-4 for button operations.

(Rear)

*1 See the Setup Guide.

And see page 6-1 for external equipment connection.

See page 7-2 for details on the Audio Select function.

See page 6-2 for details on the Audio Return Channel.

See page 6-5 for details on the MHL function.

See page 4-6 for details on the Input Select function.

The illustrations and on-screen displays in this operation manual are for explanation purposes

and may vary slightly from the actual operations.

ENG 1-2

Part Names

Remote Control Unit

POWER: Switch the monitor power on or enter standby.

DISPLAY: Display the information.

SLEEP: Set the sleep timer

(See page 3-4.)

4 0

–9: Input number.

5 •

(DOT): Used for MHL and Web browser.

(See pages 6-5,

8-1 to 8-8.)

6 OPTION:

Display the Link Operation Menu screen. This button will function only when HDMI CEC

Link Operation is used.

(See page 6-3 to 6-4.)

VOL+/-: Set the volume.

(See page 3-1.)

AUDIO: Select the audio mode during multichannel audio.

(See page 3-4.)

MUTE: Mute the sound.

(See page 3-2.)

/ / / , (ENTER): Select a desired item on the screen.

EXIT: Turn off the menu screen.

A/B/C/D: Playback control.

(See page 5-4 to 5-8.)

MANUAL: Display the operation manual.

(See page 4-10.)

APPS: Display the application window.

(See page 3-3.)

INPUT: Select a monitor input source.

(See page 2-1.)

CH: Scroll up and down in the Web browser.

(See page 8-1 to 8-8.)

MENU: Display the menu screen.

(See page 4-1.)

RETURN: Return to previous menu screen.

ENG 1-3

NOTE

When using the remote control unit,

point it at the Monitor.

Introduction

Example 1 Press INPUT.

The INPUT list screen displays.

2 Press / to select the input source.

An image from the selected source

automatically displays.

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control

unit or on the Monitor.

ENG 2-1

You can also select the input source by pressing INPUT.

Each time INPUT is pressed, the input source toggles.

Introduction

Initial Installation

Perform the following steps before you press POWER on the

remote control unit.

1. Insert the batteries into the remote control unit.

2. Plug in the AC cord to the AC outlet.

Language (Language setting)

Select from among 6 languages: English, French, Spanish,

German, Italian and Russian.

1 Press / to select the desired language listed on the

screen, and then press ENTER.

ENG 2-2

Introduction

Initial Installation (Continue)

Power Saving

Select "Yes" or "No" to configure default Display settings.

2 Press / to select "Yes" or "No".

Press ENTER to enter the setting.

Yes: AV MODE is set to "STANDARD" and Automatic Light

Sensor is set to "On".

No: AV MODE is set to "DYNAMIC (Fixed)" and Automatic

Light Sensor is set to "Off". Picture Reset can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

regardless of whether Picture Reset is "On" or "Off".

If you select "On" and there is no operation for 30 minutes:

- AV MODE will be reset to "DYNAMIC (Fixed)".

When "Off" is selected:

- Even after 30 minutes elapses, AV MODE is not reset to

"DYNAMIC (Fixed)".

ENG 2-3

Introduction

Initial Installation (Continue)

Completed

3 The settings confirmation screen is displayed. Confirm the

information displayed on the screen, and then press

ENTER.

Examples of the settings confirmation screen

NOTE

For changing the settings of the Initial Installation, perform

"Easy Setup" on the Initial Setup menu on

page 4-5.

ENG 2-4

Direct Button Operation

Changing Volume

You can change the volume by pressing VOL+/- on the

Monitor or on the remote control unit.

To increase the volume, press VOL +.

To decrease the volume, press VOL -.

Audio status

Output device Output Select

Fixed Variable

Speaker Variable sound Mute

When "Output Select" is set to "Variable", the indicator on

the screen changes as shown below.

NOTE

See page 4-6 for details on the Output Select function.

ENG 3-1

Direct Button Operation

MUTE

Mutes the current sound output.

Press (MUTE).

" " will be displayed on the screen, and the sound is

silenced.

NOTE

Mute can be cancelled by pressing VOL+/- or MUTE.

ENG 3-2

Direct Button Operation

APPS

Allows you to directly activate various types of applications.

1 Press APPS to display the application window.

Press APPS again to switch back to the currently select

input.

2 Press / to select the desired application, and then

press ENTER.

If " " is displayed, check the USB connection.

If " " is displayed, check your Monitor's network

settings and connection.

NOTE

See page 5-2, 8-4 for details of viewable applications.

When this function is not available, "Can not operate this

function now" will display.

ENG 3-3

Direct Button Operation

AUDIO

Press AUDIO to toggle between multi channel audio.

Sleep Timer

Allows you to set a time when the Monitor automatically

switches to standby.

Press SLEEP.

The remaining time displays when the sleep timer has

been set.

Each time you press SLEEP, the remaining time switches

as shown below.

When set, the time automatically starts counting down.

If you want to adjust the sleep timer, you can press SLEEP

twice then change the time setting.

When it is 5 minutes before the time expires, the remaining

time will start to keep appearing every minute.

NOTE

Select "Off" by pressing SLEEP to cancel the sleep timer.

The Monitor will enter standby when the remaining time

reaches 0.

ENG 3-4

On-Screen Display Menu

Guide display

This indicates the buttons that can be operated on the

displayed screen. The guide display varies depending on

the menu setting screen.

The operations for some selected items may be displayed

in the operational guide bar at the bottom of the screen.

Item displayed in blue

This indicates the item currently selected.

Press ENTER to go to the adjustment screen for this item.

Item in brackets

This indicates the current setting for the item.

Item displayed in white

This indicates that the item can be selected.

Item displayed in gray

This indicates that the item cannot be selected.

There are various reasons why the items cannot be

selected, but the main reasons are as follows:

— Nothing is connected to the selected input terminal.

— The function is not compatible with the current input signal.

— When this conflicts with other functions, you must change

the settings for the other functions.

Introduction

LCFONT embedded

ENG 4-1

On-Screen Display Menu

About Menu Items

Some menu items may not be displayed depending on the

selected input source.

NOTE

The screens in the operation manual are for explanation

purposes (some are enlarged, others cropped) and may

vary slightly from the actual screens.

The order of explanations for each menu item in the

following pages is not necessarily in accordance with the

alignment of the items on the screen.

LCFONT:

This product is embedded with LC Font technology, which

was developed by SHARP Corporation for clearly

displaying easy-to-read characters on LCD screens.

Introduction (Continue)

ENG 4-2

On-Screen Display Menu

1 Press MENU to display the MENU screen.

2 Press / to select the desired menu.

Press / to select a specific adjustment item, and then

press ENTER.

Additional related adjustment items may be displayed.

Press / to select the desired item.

Adjust the item while referring to the guide display.

Operations vary depending on the function or item. Refer

to the guide display corresponding to the menu setting

screen for button operations.

3 Press MENU to exit.

NOTE

Menu options differ in the selected input modes, but the

operating procedures are the same.

On-Screen Display Menu Operation

Example

ENG 4-3

On-Screen Display Menu

Menu Operation Buttons

Using the remote control

Use the following buttons on the remote control to operate the

menu.

MENU: Press to open or close the menu screen.

/ / / : Press to select a desired item on the screen or

adjust a selected item.

ENTER: Press to go to the next step or complete the setting.

RETURN: Press to return to the previous step.

Using the control panel of the Monitor

You can also operate the menu with the control panel of the

Monitor.

Button operations on the control panel correspond to the ones

on the remote control as shown below.

MENU: MENU on the remote control.

INPUT: ENTER on the remote control.

CH / : Cursor / on the remote control.

VOL+/-: Cursor / on the remote control.

ENG 4-4

On-Screen Display Menu

Example Initial Setup

NOTE

For operating the on-screen display menu,

see page 4-3.

Easy Setup

You can change the settings of the Initial Installation.

Language: Select from among 6 languages (English,

French,Spanish, German, Italian and Russian).

Power Saving: Select "Yes" or "No" to configure default

Display settings.

Yes: AV MODE is set to "STANDARD" and Automatic Light

Sensor is set to "On".

No: AV MODE is set to "DYNAMIC (Fixed)" and Automatic

Light Sensor is set to "Off". Picture Reset can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

regardless of whether Picture Reset is "On" or "Off". If you

select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if

there is no operation for 30 minutes. When "Off" is selected,

even after 30 minutes elapses, AV MODE is not reset to

"DYNAMIC (Fixed)".

Completed: The settings confirmation screen is displayed.

Confirm the information displayed on the screen.

NOTE

See Initial Installation on

pages 2-2 to 2-4 for setting each item.

Language

You can also select a language from the Initial Setup menu.

Select from among 6 languages: English, French, Spanish,

German, Italian and Russian.

NOTE

To change the language of the manual, select "MENU" >

"Initial Setup" > "Language" to change the language.

Then, press MANUAL again.

ENG 4-5

On-Screen Display Menu

Example Initial Setup (Continue)

Input Settings

HDMI auto view

When you view images sent from external equipment in an

HDMI connection, this function allows the image size on the

Monitor to automatically switch to an appropriate one.

NOTE

Refer to your external equipment operation manual for the

signal type.

Digital Audio Output

You can output digital audio to an AV amplifier or similar

device whose DIGITAL AUDIO INPUT terminal is connected

to the DIGITAL AUDIO OUT terminal on the Monitor. Please

select an audio output format compatible with the audio

format of the program you are watching and the equipment

connected.

PCM: For connecting to equipment that does not support

Dolby Digital and DTS. The same audio (main, sub, or

main/sub) as the audio of the program being viewed is

output.

2-channel audio with a sampling rate of 48 kHz or less is

output as linear PCM audio.

Bitstream: For connecting to an audio system that supports

Dolby Digital and DTS. Audio is output through both the

main and sub channels.

NOTE

Video input audio are output in PCM mode even when

"Bitstream" is selected.

PCM digital input signals are output in PCM mode even

when "Bitstream" is selected.

Audio Select

This function sets the terminal to output the computer audio.

The adjustment items vary depending on the input source.

Select the input source corresponding to the terminal

connected to the PC and then adjust the desired item.

To perform the operation, refer to "Initial Setup" > "Input

Settings" > "Audio Select".

(See page 7-2.)

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL+/- on the

remote control unit or on the Monitor.

Sound via the AUDIO OUT terminal is not adjustable and

outputs at a consistent level.

Variable: Sound via the AUDIO OUT terminal is adjusted

with VOL+/- on the remote control unit or on the Monitor.

Sound via speaker is muted.

Input Select

For image input applied to the COMPONENT IN or VIDEO IN

terminal, switch to “COMPONENT” or “Video”, respectively.

COMPONENT: Select component video.

Video: Select composite video.　　

NOTE

If no (color) image display, try changing to another signal

type.

Check the operation manual of the external equipment for

the signal type.

Input Skip

This setting allows you to skip the HDMI or PC IN Input ("PC

IN, COMPONENT, HDMI 1, HDMI 2, HDMI 3 and VIDEO") on

the Input Selection operation.

ENG 4-6

On-Screen Display Menu

Example Initial Setup (Continue)

Input Settings

Color System

Select the video signal system compatible with your

equipment from the list below:

AUTO/NTSC/PAL-M/PAL-N

NOTE

"Color System" can only be set for the VIDEO IN.

HDMI CEC Link

Make the settings to use LINK Operation.

Set the settings with "Initial Setup" > "Input Settings" > "HDMI

CEC Link".

(See page 6-2.)

Fine Sync.

You can adjust the position on the image input from a PC the

settings with "Initial Setup" > "Input Settings" > "Fine Sync.".

(See page 7-1.)

Reset

If complex adjustments are made and the settings cannot be

restored to normal, you can reset the settings to the factory

preset values.

ENG 4-7

On-Screen Display Menu

Example Information

NOTE

For operating the on-screen display menu,

see page 4-3.

Identification

The current version of the Monitor software is displayed.

Software Update

This is used to upgrade the system software to enhance the

Monitor functions.

1 Press MENU to display the MENU screen, and then press

/ to select "Information".

2 Press / to select "Software Update", and then press

ENTER.

3 Press / to select "Manual Update" or "Auto Update

Setting", and then press ENTER.

The operations thereafter vary depending on the setting.

Auto Update Setting

When the Monitor is on, or when an Internet application is

being accessed, this function enables the Monitor to connect

to the network and check for updates automatically.

When an update is available, a message is displayed.

Press / to select "Yes", and then press ENTER to display

the download screen.

(See page 4-10.)

NOTE

This function does not work when a broadband connection

or Internet Setup is not available.

A message may also be displayed when an application is

running.The message varies depending on the application.

Manual Update

Select the method for manually updating the software.

USB Update: Updates the software using a USB memory

device containing the update file. (See "Updating the

Software with a USB Memory Device".)

Network Update: Downloads the update file via the network

and then updates the software.

(See page 4-10.)

NOTE

A broadband connection and Internet Setup are required to

update the software using the network.

(See page 8-1.)

It may take time to access and download the update

depending on the Internet connection and other factors.

ENG 4-8

On-Screen Display Menu

Example Information (Continue)

Software Update

Manual Update

CAUTION

Do not remove the USB memory device or unplug the

AC cord while the software is being updated.

Be sure to properly follow the whole procedure

described below, step by step. Otherwise, for

example, the Monitor cannot read the data in the USB

memory device and software updating will fail.

1 Insert the USB memory device with the update file into the

USB terminal on the Monitor.

2 Press / on the Manual Update screen to select "USB

Update", and then press ENTER.

3 Press ENTER to start checking the data in the USB

memory device.

4 During the data checking, "Checking" blinks.

The current version of the Monitor software and the

version of the update file on the USB memory device

are displayed.

If the USB memory device is not properly installed or the

correct update file cannot be found on the USB memory

device, an error message is displayed.

Check the file on the USB memory device, and then

reinsert the USB memory device correctly.

ENG 4-9

On-Screen Display Menu

Example Information (Continue)

Software Update

Manual Update

CAUTION

Do not remove the USB memory device or unplug the

AC cord while the software is being updated.

5 When the software is successfully updated, a screen is

displayed indicating that the update process is completed.

After this screen is displayed, the Monitor automatically

turns off and then turns on again.

If the update has failed, check the file in the USB

memory device and try Software Update again.

6 Remove the USB memory device.

Updating the Software via the Network

1 Press / on the Manual Update screen to select "Network

Update", and then press ENTER.

The Monitor connects to the network and checks for

updates.

To cancel, press ENTER.

2 The current version of the Monitor and the latest version of

software are displayed. To update the Monitor software,

select "Yes", and then press ENTER.

When a server connection cannot be established or an

update is not available, a message is displayed.

If a server connection cannot be established, check the

broadband connection and Internet Setup.

3 After the update file is downloaded, the software update

process begins.

CAUTION

Do not unplug the AC cord while the software is being

updated.

4 When the software is successfully updated, a screen is

displayed indicating that the update process is completed.

A screen indicating that the update is completed is

displayed. 4 seconds later, the Monitor restarts

automatically.

If the software was not updated successfully, check the

broadband connection and Internet Setup, and then try

updating the software again.

Manual

Displays the built-in operation manual on the screen. You can

read information about how to use this device.

ENG 4-10

On-Screen Display Menu

Example Picture Settings

Adjusts the picture to your preference with the following

picture settings.

NOTE

For operating the on-screen display menu,

see page 4-3.

Selected item button button

Backlight The screen dims The screen

brightens

Contrast For less contrast For more contrast

Brightness For less brightness For more

brightness

Color For less color

intensity For more color

intensity

Tint Skin tones become

reddish Skin tones

become greenish

Sharpness For less sharpness For more

sharpness

For resetting all Picture adjustment items to the factory

preset values, press / to select "Reset", press ENTER,

press / to select "Yes", and then press ENTER.

AV MODE (Changing Pic.Quality)

The audio and video settings can be changed to suit the

program or input content being watched.

You can use USER Mode to create customized settings for

each Monitor input. These settings will be automatically saved

on each input for convenience.

STANDARD: For a highly defined image in a normal

lighting.

MOVIE: For a movie.

PC: For PC.

USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

DYNAMIC: For a clear-cut image emphasizing high contrast,

useful for sports viewing.

DYNAMIC (Fixed): Changes the image and sound settings

to the factory preset values. No adjustments are allowed.

NOTE

You can select a different AV MODE item for each input

mode. (For example, select STANDARD for Monitor input

and DYNAMIC for COMPONENT.)

ENG 4-11

On-Screen Display Menu

Example Picture Settings (Continue)

Automatic Light Sensor (Light Sensor)

Automatically adjusts the brightness of the screen.

Off: The brightness is fixed at the value set in "Backlight".

On: Automatically adjusts.

On:Display: Displays the Light Sensor effect on the screen

while adjusting the brightness of the screen.

NOTE

When set to "On", the Light Sensor senses the surrounding

light and automatically adjusts the backlight brightness.

Make sure nothing obstructs the Light Sensor, which could

affect its ability to sense surrounding light.

When set to "On:Display", Light Sensor effect displays on

the screen while the Light Sensor adjusts the screen

brightness.

ENG 4-12

On-Screen Display Menu

Example Picture Settings (Continue)

Advanced

Motion Enhancement

Use Motion Enhancement to view fast-action video more

clearly.

Selected item Description

AquoMotion240 Turn the LED backlight on or off

for 120Hz drive display.

120Hz For obtaining a clearer image.

Off Original image.

NOTE

"Motion Enhancement" may cause image noise. If this

occurs, turn the function "Off".

Digital Noise Reduction

Produces a clearer video image.

AUTO: Automatically adjusts the level of noise reduction.

High/Middle/Low: You can select a desired level for viewing

a clearer video image.

Off: No adjustment.

C.M.S.

(Color Management System)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue: This is a standard to adjust the color either

more reddish or more bluish in tone.

C.M.S.-Saturation: Increases or decreases the saturation of

a selected color.

C.M.S.-Value: A higher value makes the image brighter.

A lower value makes the image darker.

NOTE

For resetting all adjustment items to the factory preset

values, press / to select "Reset", and then press

ENTER.

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Middle:

Low: White with reddish tone

Fine tuning the color temperature

White balance can be adjusted between a maximum of +30

and a minimum of –30 for each color temperature.

NOTE

For resetting all adjustment items to the factory preset

values, press / to select "Reset", and then press

ENTER.

ENG 4-13

On-Screen Display Menu

Example Picture Settings (Continue)

Advanced

Active Contrast

Automatically adjusts the image contrast according to the

scene.

On: Produces high contrast image.

Off: No adjustment.

Film Mode (3:2 pull-down)

This function provides high-quality playback of images

originally encoded at 24 frames/second, such as films.

Advanced: Adjusts effects to reduce judder film contents.

You can select a desired level of judder reduction from 0

to +10.

Standard: Plays back image with equal display time for

each frame, reproducing movie theater experience.

Off: Normal viewing mode.

NOTE

"Film Mode" does not function depending on input signal

type.

"Standard" does not function depending on input signal

type.

Monochrome

For viewing a video in monochrome.

Reset

Returns Picture Settings to their factory preset values. To

reset, select "YES" and then press ENTER.

ENG 4-14

On-Screen Display Menu

Example Audio Settings

You can adjust the sound quality to your preference with the

following settings.

NOTE

For operating the on-screen display menu,

see page 4-3.

Selected

item button button

Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance Decrease audio from

the right speaker Decrease audio from

the left speaker

NOTE

The Audio menu is grayed out when "Output Select" is set

to "Variable".

(See page 4-6.)

For resetting Audio adjustment items to the factory preset

values, press / to select "Reset", press ENTER, press

/ to select "Yes", and then press ENTER.

SURROUND

The surround function produces Surround effect from the

speakers.

NOTE

The Audio Settings menu is grayed out when "Output

Select" is set to "Variable".

(See page 4-6.)

For some discs, setup may be required on your BD/DVD

player. In this case, please refer to the operation manual

of your BD/DVD player.

Auto Volume

Different sound sources sometimes do not have the same

loudness level, such as a program and its commercial brakes,

The Automatic Volume Control(Auto Volume) reduces this

problem by equalizing.

ON: Reduces the loudness gaps among different sound

source. The result is automatically adjusted according to

the sound sources.

OFF: No adjustment.

Reset

Returns Audio Settings to their factory preset values. To

reset, select "YES" and then press ENTER.

ENG 4-15

On-Screen Display Menu

Example Network Settings

Dashboard

You can display a list of the main Network settings.

Wired Setup

You can make adjustments manually for the IP.

You can switch the "Connect Type" to "AUTO" or "Manual".

Check that numbers are display for each setting.

If there are any settings without numbers, specify the

numbers by following the on-screen instructions.

Inputs the IP address etc by using remote control buttons

0-9.

IP Control

Set this function when operating the Monitor from equipment

connected by LAN.

(See page 7-3.)

ENG 4-16

On-Screen Display Menu

Example Network Settings (Continue)

Device Name

Set this function when operating the Monitor from equipment connected by LAN.

(See page 7-3.)

Use the software keyboard when you need to input text at Device Name.

Software Keyboard

ABC

Switches character to uppercase. If "abc" is pressed again, switches character to lowercase.

":&12"

Changes character set into the alphabet, numbers, symbols, etc.

Applies the entered information and closes the software keyboard.

space

Enters a space.

DEL

Erases the character string.

Wake on LAN

You can enable or disable Wake on LAN function.

Enable: Wake on LAN is available.

Disable: Wake on LAN is unavailable.

NOTE

Wake on LAN (Magic packet) can be used to turn on Monitor via Wired network (LAN).

Disabling Wake on LAN reduces the standby power consumption.

ENG 4-17

On-Screen Display Menu

Example System Options

NOTE

For operating the on-screen display menu,

see page 4-3.

Power Control

Power control setting allows you to save energy.

No Signal Off

When this function is enabled, the Monitor automatically shuts

down if no signal is received for more than 15 minutes.

NOTE

When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

When a Monitor program finishes, this function may not

operate.

No Operation Off

When you enable this function, the Monitor automatically

shuts down if no operation is performed for more than 3

hours.

NOTE

When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

ENG 4-18

On-Screen Display Menu

Example System Options (Continue)

View Option

View Mode

This function changes the screen size. Select "View Option" on the menu to display the View Mode menu screen. The View Mode

menu varies depending on the input source.

For HD video source

Stretch Dot by Dot (Full Screen) S.Stretch (Smart stretch) Zoom

Suitable for viewing wide-

screen 1.78:1 aspect ratio

video source, stretch mode

will still show very thin black

bands at the top and bottom

of the screen.

"Dot by Dot" when the number

of pixels on the screen and

the resolution of the signal

are the same. "Full Screen"

when the number of pixels

on the screen and the

resolution of the signal are

different. In either case, the

image fully fills the screen.

Suitable for stretching 4:3

video source to fill the

screen.

Suitable for viewing wide-

screen 2.35:1 aspect-ratio

video source in full screen.

NOTE

When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please

change view mode to correct this.

ENG 4-19

On-Screen Display Menu

Example System Options (Continue)

View Option

View Mode

For 4:3 Video source

Example: Screen size images

Side Bar S.Stretch (Smart stretch) Zoom Stretch

Suitable for viewing

conventional 4:3 video source

in their normal format.

Suitable for stretching 4:3

video source to fill the screen. Suitable for viewing wide-

screen 2.35:1 anamorphic

DVDs in full screen.

This mode is useful for 1.78:1

DVDs. When viewing 1.85:1

DVDs, stretch mode will still

show very thin black bands at

the top and bottom of the

screen.

For USB-Video or Home Network Video

Example: Screen size images

Input signal Auto Original Stretch

Keeps the original

aspect ratio in a full

screen display.

Displays an image by

an original size. An image fully fills the

screen.

ENG 4-20

On-Screen Display Menu

Example System Options (Continue)

View Option

View Mode

For PC

Example: Screen size images

Input signal Normal Stretch Dot by Dot

Keeps the original aspect

ratio in a full screen display. An image fully fills the

screen. Detects the resolution of the

signal and displays an image with

the same number of pixels on the

screen.

NOTE

Connect the PC before making adjustments. See the Setup Guide.

Selectable screen size may vary with input signal type.

Audio Only

When listening to music from a music program, you can turn the screen off and enjoy audio only.　

NOTE

The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE) is presses.

Change CC

Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information.

The information displayed varies depending on the video you are watching.

NOTE

Closed Caption is available for Video input and is unavailable for Component input.

ENG 4-21

On-Screen Display Menu

Example

USB: After the power is turned on, the video is played back

continuously or slide show of still images

automatically starts.

Web Browser: After the power is turned on, the Web

Browser starts automatically and displays

the Home Page.

System Options (Continue)

Caption Setup

This function allows you to adjust the closed caption screen

appearance to suit your preference.

Size/Edge Effect/Edge Color/Text Color/Background

Color/Text Opacity/Background Opacity

Startup Screen

With this function activated, the SHARP logo will be displayed

when you turn on the Monitor.

Front Indicator Light

When this function is set to "On", the LED on the front of the

Monitor turns on.

NOTE

"On" is the factory preset value. If you want to turn off the

LED, set the function to "Off".

Auto Play

You can automatically start USB media player or web

browser.

Off: This function does not work.

NOTE

When more than one video is played back continuously,

the screen goes black while the data of the next video is

being loaded. To shorten this blackout time, adjust the

data size of the content.

Create a folder named "AutoPlay" in the root directory of

the USB memory device (the first directory when the USB

memory device is opened), and store into the folder the

video or still images you want to playback.

2. Get the password input screen displayed.

Procedure

The Input starts with the left most

digit.

Use the numeric keys [1] thru [9]

and [0] keys on the remote

controller. The other keys are not

acceptable.

With a numeric-key input, "-" will

change to " ".

The input position will move one

digit to the right.

With all the 3 digits entered, the

password will be verified.

3. The 3-digit password is now verified.

The password [0] [2] [7] provides for the public mode

screen.

With any other passwords, the screen changes to the

normal mode.

When both video and still images are saved in "AutoPlay"

folder, video has priority and still images will not be

played.

You must insert the USB memory device to the Monitor

before turning off the Monitor.

If there are images on the USB memory device but they do

not appear on the screen, switch to USB mode and check

whether the image files on the USB memory device are

shown correctly.

It will be interrupted by remote control operation. After a

few minutes, it will automatically start again.

Public Mode

1. How to start Public Mode setup screen

1. There are two ways to enter the public mode.

Press / / / to select "MENU" > "System Options" >

"Public Mode", and then press ENTER.

Press the "INPUT" and "VOL (+)" keys on the set at once

and turn on the power.

ENG 4-22

On-Screen Display Menu

Example System Options (Continue)

Public Mode

2. How to exit from Public Mode setup screen

There are the following ways to quit the public mode setup

screen.

Turn off the power with the "POWER" key.

Select "EXECUTE".

3. Public Mode Menu

The guidance is not displayed on screen.

Setup procedure

Turn off the power with the "POWER" key.

To move the cursor up and down, use the “cursor

UP/DOWN” key (remote controller) or “CH ( )/( )” key

(remote controller and Monitor).

To change the settings, use the “cursor RIGHT/LEFT” key

(remote controller) or “VOL (+)/(-)” key (remote controller

and Monitor).

To save new settings, select “EXECUTE” and press

“ENTER” key (remote controller) or "Input" key (Monitor).

4. How to use USB clone

This is the function that copying the one Monitor's user setting

to other Monitors or copying previous user setting to itself.

Cloning is available between the same model.

1. Insert the USB memory to Monitor.

2. Enter Public Mode.

3. Select "COPY MODE".

4. Then select the "TV→USB [Start]".

5. "USB Cloning Finished." message is displyed when it is

finished , then select "Reset" . Monitor will restart.

6. Insert the USB which has the data from Monitor to another

Monitor or itself.

7. Enter public mode.

8. Select "COPY MODE".

9. Then select the "USB→TV [Start]".

10. "USB Cloning Finished." message is displayed when it is

finished , then select "Reset" . Monitor will restart.

11. Comfirm the user setting is copied.

PUBLIC MODE

POWER ON FIXED [ VARIABLE ]

MAXIMUM VOLUME [ 100 ]

VOLUME FIXED [ VARIABLE ]

VOLUME FIXED LEVEL [ 30 ]

RC BUTTON [ RESPOND ]

PANEL BUTTON [ RESPOND ]

MENU BUTTON [ RESPOND ]

AV POSITION FIXED [ VARIABLE ]

ON SCREEN DISPLAY [ YES ]

INPUT MODE START [ NORMAL ]

INPUT MODE FIXED [ VARIABLE ]

LOUD SPEAKER [ ON ]

RC PATH THROUGH [ OFF ]

REMOTE POWON [ ENABLE ]

PUBLIC MODE [ OFF ]

RESET

EXECUTE

COPY MODE

ENG 4-23

On-Screen Display Menu

Example

Sound volume Up/Down (VOL +/–) [for both

remote control and the unit]

Mute (MUTE)

System Options (Continue)

PUBLIC MODE

5. On Setting Items

1. POWER ON FIXED

Selection Selection between "Variable" and "Fixed"

Default - (Variable)

Explaination In "Fixed setting, the power-off by the power key of the unit is invalidated and the image is kept being received.

The power can be turned off by stopping the power supply from AC.

Limit in Setting Refer to the "Power-On Fixed" sheet.

Exception None

Remarks In "Variable" setting, the power operation is in wait for 1 sec and then turn off when the main power switch is

off.

2. MAXIMUM VOLUME

Selection Adjustment from 0 to 100

Default 100

Explaination Sound volume can not be adjusted higher than the present value.

Limit in Setting When the sound volume is set lower than 99, only figures are displayed and the sound volume bar is not

displayed.

Exception

Remarks

3. VOLUME FIXED

Selection Selection between "Variable","Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)"

Default (Variable)

Explaination FIXED: Fixed at the level adjusted for a fixed volume.

AC CTRL: Start-up at the level specified for a fixed volume at ACON.

AC/RC CTRL: Start-up at the level specified for a fixed volume at start.

Limit in Setting The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting

is made impossible. (Basically, the menu is not displayed.)

The following keys become invalid when set to "Fixed":

Exception

Remarks As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.

ENG 4-24

On-Screen Display Menu

Example System Options (Continue)

PUBLIC MODE

4. VOLUME FIXED LEVEL

Selection Adjustment from 1 to 100

Default 30

Explaination The sound volume to be fixed by “Volume fixed” is determined.

Limit in Setting None

Exception None

Remarks Settingis valid when "Volume fixed" is selected for "fixed" , "ACON (AC CTRL)" or "AC/RCON (AC/RC CTRL)".

5. RC BUTTON

Selection Selection between “Respond”, “No Respond” and “Limited”

Default Respond

Explaination Making the remote controller settings.

At the “No Respond” setting, the remote controller keys are disabled. Its power key (reception/standby key) is

disabled too.

At the “Limit” setting, volume / , channel / , POWER button are operative.

Limit in Setting In “No respond” setting, all the keys (including the power key) are not accepted.

Exception

Remarks

6. PANEL BUTTON

Selection Selection between “Respond” and “No respond”

Default Respond

Explaination All the operations by keys (except the power key) of the unit can be invalidated. Limit

Limit in Setting

Exception

Remarks

ENG 4-25

On-Screen Display Menu

Example System Options (Continue)

PUBLIC MODE

7. MENU BUTTON

Selection Selection between “Respond” and “No respond”

Default Respond

Explaination In “No respond” setting, the menu operation by the menu key of the remote control and the menu key of the unit

are invali-dated.

Limit in Setting

Exception

Remarks

8. AV POSITION FIXED

Selection Selection between “Variable” and “Fixed”

Default Variable

Explaination In case of “Fixed” setting,

–Menu “Picture” and “Audio” setting can't be changed like “Dynamic (Fixed)”.

–When “AV Mode” key is pressed, Monitor just displays current AV Mode (cannot be changed.).

Limit in Setting None

Exception None

Remarks When receiving AV Position key and other direct audio select keys, the current display stays on and no setting

can be changed.

9. ON SCREEN DISPLAY

Selection Selection between “Yes”, “No”

Default Yes

Explaination At the “No” setting, all OSD except public mode menu arenot displayed on screen. An input selection is

immediately made because the menu is not displayed.

Limit in Setting Keys falling under any of the following items become invalid.

Appearance of screen changes and the sound changes.

Personal functions which are hard to restore.

Screen display, menu, OFF-timer, AV MODE, screen size switching, AUDIO ONLY, sound changeover,

LANGUAGE, CLOSED CAPTION

Others Simple input switching is generated

Exception Such a caution which is displayed independently is displayed as it is. Non-responding signal caution

Remarks When CC has already been ON, CLOSED CAPTION is displayed.

ENG 4-26

On-Screen Display Menu

Example System Options (Continue)

PUBLIC MODE

10. INPUT MODE START

Selection Selection between “Normal”,"COMPONENT", “VIDEO”, “PC”, “HDMI 1/2/3”

Default Normal

Explaination In power-ON, the input source to be started or channel can be set.

(In standard mode, the operation follows the last memory.)

About options All the input sources in the model are made selectable.

Limit in Setting The display of channel setting menu and the channel setting operation are prohibited.

Exception

Remarks In setting at “Normal”, the setting of “Input mode fixed” is changed to “Variable” and selection should be

prohibited.

11. INPUT MODE FIXED

Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)”

Default - (Variable)

Explaination At the “Fixed”setting, the Monitor set gets started with the settings of “Input mode start”, and then any other

channels and inputs are not accepted.

At the “ACON (AC CTRL)”setting, the Monitor set gets started with the settings of “Input mode start” under AC

control.

At the “AC/RCON (AC/RC CTRL)” setting, the Monitor set gets started with the settings of “Input mode start”

under either control.

Limit in Setting The following keys are invalidated.

input However, the keys (input switching and CH / keys) of the unit for menu operation remain valid.

Exception None

Remarks In the following case, setting is cancelled and mode is changed to “Variable”.

When the setting of “Input mode start” is set to “Normal”.

12. LOUD SPEAKER (ON/OFF)

Selection Selection between “ON” and “OFF”

Default ON

Explaination If “OFF” is selected, Monitor stops Speaker output.

Limit in Setting None

Exception None

Remarks Press the volume UP/DOWN key, and the mute icon appears for 4 seconds.

The mute key and audio-related keys are displayed with caution.

Usually, the audio output can be adjustable.

ENG 4-27

On-Screen Display Menu

Example System Options (Continue)

PUBLIC MODE

13. RC PATH THROUGH

Selection Selection between “OFF”, “ON: Display RCE” and “ON: Display RCD”

Default OFF

Explaination Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.

Limit in Setting None

Exception None

Remarks When the setting is “ON: Monitor RCD”, Monitor doesn't respond to the RC operation.

14. REMOTE POWON

Selection Selection between “Disable” and “Enable”

Default Enable

Explaination In the standby mode, the power-on by the 232C command is enabled or disabled.

Limit in Setting None

Exception None

Remarks The setting by "RSPW" RS-232C/IP control command has prioriy overthis setting.

15. PUBLIC MODE (ON/OFF)

Selection Selection between “ON” and “OFF”

Default OFF

Explaination In case of “ON”, public mode settings are effected.

Limit in Setting None

Exception None

Remarks The public-mode settings are operable only when this item is set at ON.

ENG 4-28

Enjoying Photo/Music/Video Playback

Preparation

You can connect to a USB memory device, USB hard drive or Home Network server to enjoy viewing

pictures, listening to music, and watching videos.

NOTE

Depending on the USB memory device/USB hard drive/Home Network server, the Monitor may

not be able to recognize the recorded data.

It may take time to read the recorded data if the USB memory device/USB hard drive/Home

Network server contains many files or folders.

Use only alphanumeric characters for naming files.

File names over 80 characters (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive

Insert the USB memory device with recorded photos, music or videos into the USB terminal on the

Monitor.

When connecting a USB hard drive, be sure to use a hard drive with an AC adapter.

Do not remove a USB memory device or memory card from the Monitor while transferring files,

using the slide show function, or switching screens, or before you exit "USB" from the INPUT list.

Do not insert and remove a USB memory device/USB hard drive to and from the Monitor

repeatedly.

When using a card reader, be sure to insert a USB memory device first.

CAUTION

Do not use a USB extension cable when connecting a USB memory device to the USB

terminal on the monitor.

Using a USB extension cable with the USB memory device may prevent the Monitor from

performing correctly.

Connecting a Home Network Server

Connect the Monitor to the Home Network server using an ETHERNET cable.

NOTE

Do not disconnect a Home Network server from the Monitor while transferring files, when a screen

is switching to another or before you exit "Home Network" from the INPUT list.

Do not connect and disconnect a Home Network server from the Monitor repeatedly.

ENG 5-1

Enjoying Photo/Music/Video Playback

Selecting the Folders to Play Back

To play back data on a USB memory device, insert the USB

memory device on the Monitor.

Use the following procedure to switch back to USB mode

after switching from USB mode to another mode.

1 Select "USB" or "Home Network" from INPUT list screen.

2 Press / to select "Photo", "Music" or "Video", and then

press ENTER.Example

3 Press / to select the desired folder, and then press

ENTER.

"VIEW MODE" is fixed during the Music mode. During

"Video mode", you can select ”Auto", "Original" or

"Stretch".

During "Video mode", videos that are smaller than the

number of pixels on the screen are displayed at their

original size.

In these cases, switch "VIEW MODE" to "Auto" to have

the video fill the screen.

NOTE

16 is the maximum number of USB drives and 10 is the

maximum number of Home Network servers that can be

displayed.

USB Device Compatibility

USB device USB Memory, USB card reader (Mass

Storage class), USB hard drive

File system FAT/FAT32/NTFS (USB hard drive only)

Photo file

format JPEG (.jpg) (DCF2.0 compliant)

Music file

format MP3 (.mp3)

Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k,

112k, 128k, 160k, 192k, 224k, 256k,

320kbps

Sampling frequency: 32k, 44.1k, 48kHz

ENG 5-2

Enjoying Photo/Music/Video Playback

Selecting the Folders to Play Back

(Continue)

Video file format

File

extension Container Video Audio

.avi AVI

MPEG-1

MPEG-4

SP/ASP(XviD)

MPEG-4 AVC

(H.264)

Motion JPEG

MPEG-

Audio

LPCM

MS-ADPCM

DTS

AC3

.mkv MKV

MPEG-1

MPEG-2

MPEG-4

SP/ASP(XviD)

MPEG-4 AVC

(H.264)

MPEG-

Audio

LPCM

MS-ADPCM

DTS

AC3

.asf

.wmv ASF

WMV

MPEG-4

SP/ASP(XviD)

WMV 7/8/9

LPCM

WMA

.mp4 MP4

MPEG-4

SP/ASP(XviD)

MPEG-4 AVC

(H.264)

Motion JPEG

MPEG-

Audio

LPCM

MS-ADPCM

AC3

.mpg

.mpeg MPG MPEG-1

MPEG-2

MPEG-

Audio

LPCM

MS-ADPCM

AC3

NOTE

Progressive format jpeg files are not supported.

USB 1.1 devices may not be played properly.

Operation using USB hubs is not guaranteed.

Some video file formats may not be played depending on

the file.

Some images may not be displayed in the appropriate

aspect ratio depending on the file format.

Home Network Server Compatibility

Photo file format JPEG

Music file format LPCM, MP3

Video file format AVI, ASF, MP4, WMV, MPG

NOTE

Progressive format jpeg files are not supported.

Some video file formats may not be played depending on

the file or the server.

ENG 5-3

Enjoying Photo/Music/Video Playback

Playing Back Files on a USB

Memory Device/Home Network

Server

NOTE

The screen images in this section are for the USB mode. It

may be slightly different in the Home Network mode.

Photo Mode

Viewing Thumbnails

Example

Buttons for thumbnail operations

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory.

When selecting a photo thumbnail:

Start the slide show.

RETURN Return to the previous process.

A (red) Clear the file information display.

B (green)

C (blue)

D (yellow)

NOTE

A few seconds after the cursor is positioned on a

thumbnail, the file information is displayed in the right of

the center of the screen.

ENG 5-4

Enjoying Photo/Music/Video Playback

Playing Back Files on a USB

Memory Device/Home Network

Server (Continue)

Slide Show

The photos displayed on the thumbnail selection screen are

displayed as a slide show.

Buttons for slide show operation

Buttons Description

RETURN Return to the thumbnail selection screen.

B (green) Previous file

C (blue) Displaying/hiding operation guidance

D (yellow) Next file

NOTE

Rotating photos only applies to the temporarily selected

item and this setting is not saved.

ENG 5-5

Enjoying Photo/Music/Video Playback

Playing Back Files on a USB

Memory Device/Home Network

Server (Continue)

Music Mode

Example

Buttons for music mode

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory.

When selecting a music file:

Play music.

RETURN Return to the previous process.

A (red) Clear the file information display.

B (green)

C (blue)

D (yellow)

NOTE

The displayed play time may differ slightly from the actual

play time depending on the files.

A few seconds after the cursor is positioned on a

thumbnail, the file information is displayed in the right of

the center of the screen.

ENG 5-6

Enjoying Photo/Music/Video Playback

Playing Back Files on a USB

Memory Device/Home Network

Server (Continue)

Video Mode

Example

Buttons for file selecting operations

Buttons Description

/ / / Select a desired item.

ENTER When selecting a folder icon:

Enter this directory.

When selecting a video file: Play the

video.

RETURN Return to the previous process.

A (red) Clear the file information display.

B (green)

C (blue)

D (yellow)

NOTE

A few seconds after the cursor is positioned on a

thumbnail, the file information is displayed in the right of

the center of the screen.

When multiple movies are played continuously, blackout

occurs while loading the next data. Please adjust the data

size of contents to shorten blackout.

ENG 5-7

Enjoying Photo/Music/Video Playback

Playing Back Files on a USB

Memory Device/Home Network

Server (Continue)

Buttons for playing mode

Buttons Description

Stop playback

Fast forward

Fast rewind

A (red) Subtitle

B (green) Previous file

C (blue) Display/hide operation guide

D (yellow) Next file

RETURN Go back to the file selection screen.

ENG 5-8

Using LINK Operation

Controlling HDMI Equipment Using LINK Operation

What's LINK Operation?

Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK Operation you can

interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).

LINK Operation allows you to operate the HDMI-connected equipment with one remote control.

NOTE

For connecting the Monitor to LINK-compatible equipment, use commercially available cables.

Point the remote control toward the Monitor, not to connected HDMI equipment.

Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-

certified cable.

Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this

system.

These operations affect the HDMI equipment selected as the current input source. If the

equipment does not operate, turn on the equipment and select the appropriate input source using

INPUT.

The LINK feature may not operate properly when an HDMI splitter or AV selector unit is used.

These devices may cause interruptions to the image and/or sound.

Connected LINK-compatible devices can be operated without changing the settings of the remote

control unit.

The

OPTION button will function only when LINK Operation is used.

Control the LINK-compatible audio system

Set the volume of LINK-compatible audio system.

NOTE

The steps in "HDMI CEC Link" on

page 6-2 need to be completed beforehand.

Refer to this operation manual and the operation manual of the LINK device to be used with this

Monitor.

Buttons for playing mode

Buttons Description

/ / / Select a desired item

ENTER Activate the selected function

A (red) Stop

B (green) Previous chapter

C (blue) Play

D (yellow) Next chapter

RETURN Go back to the previous page

EXIT Exit from the page

ENG 6-1

Using LINK Operation

Controlling HDMI Equipment Using

LINK Operation (Continue)

HDMI CEC Link

Make the settings to use LINK Operation. Set the settings

with "Initial Setup" > "Input Settings" > "HDMI CEC Link".

Link Operation

Select LINK Operation Control to disable the LINK function

even when a LINK-compatible HDMI device is connected to

the Monitor. This function prevents the device from starting to

operate unexpectedly.

Auto Power On

If this is activated, the One Touch Play function is enabled.

While the Monitor is in standby mode, it automatically turns on

and plays back the image from the HDMI source.

Audio Return Channel

This function allows you to listen to the Monitor audio via

audio equipment without using an optical fiber cable, which

conventionally is required.

Requirements for using an ARC-compatible AV amplifier:

ARC-compatible AV amplifier connected to the ARC-

compatible HDMI IN terminal. (HDMI IN 1)

(Refer to the operation manual of the ARC-compatible

equipment for details.)

Use of an ARC-compatible cable.

On: You can listen to the Monitor audio with ARC-

compatible audio equipment.

Off: This function does not work.

NOTE

If the Monitor audio cannot be output from the AV amplifier

even after making the necessary settings, connect the

Monitor to the AV amplifier with an optical fiber cable and

select "Off".

ENG 6-2

Using LINK Operation

Link Operation Menu

The Link Operation Menu allows you to make adjustments

during operation of LINK-compatible equipment.

1 Press OPTION to display the Link Operation Menu.

2 Press / to select the desired item, and then press

ENTER.

Specific operations differ depending on the item you

select. Following are the basic operations for each item.

Device Power On/Off

You can manually turn on/off the power of the connected

LINK-compatible equipment.

Each time you press ENTER, the connected equipment

switches on or off.

ENG 6-3

Using LINK Operation

Link Operation Menu (Continue)

Show Start Menu

You can call up a setup menu from the connected LINK-

compatible equipment.

NOTE

Depending on the status of the equipment (recording or in

standby mode, etc), the setup menu will not be displayed.

Change Audio Output Device

You can select to listen to the Monitor sound only from the

LINK-compatible audio system.

Audio Return Channel: The sound from the Monitor

speaker is muted and only the sound from the LINK-

compatible audio system is audible.

• You can use VOL+/- and MUTE.

Built-in Speaker: The sound is output from the Monitor

speaker.

HDMI Device Selection

If multiple HDMI devices are connected in a daisy chain, you

can specify which device to control here.

Press / to select the desired device from a list of

connected HDMI devices, and then press ENTER.

HDMI CEC Link

You can also display the HDMI CEC Link screen from the

Link Operation Menu.

ENG 6-4

Using LINK Operation

Using a Smartphone with the

Monitor

This function enables you to connect the Monitor to a

smartphone that supports Mobile High-Definition Link

(MHL™ ) using an MHL cable.

To connect the Monitor to your MHL-compatible smartphone,

be sure to use an MHL cable (commercially available).

You can view pictures and video on a large screen.

You can play back music files.

NOTE

An MHL-compatible portable device is required to use this

function. Connect the device to the HDMI IN 3 terminal.

This product incorporates MHL 2.2.

Auto Power On

When an MHL-compatible device is connected to the Monitor,

the Monitor turns on automatically.

This function operates when "LINK Operation" is set to

"On".

(See page 6-2.)

Auto Input Selection

When an MHL-compatible device is connected while the

Monitor is on, the input mode is selected automatically.

This function operates when "LINK Operation" is set to

"On".

(See page 6-2.)

Operation Using the Remote Control

The remote control of the Monitor can be used to operate a

portable device.

/ / / , ENTER, EXIT, 0-9, • (DOT), ENT, etc.

The operations vary depending on the connected

equipment and content being viewed.

ENG 6-5

Using a PC

Adjusting the PC Image

You can adjust the position of the image input from a PC by selecting "Initial Setup" > "Input

Settings" > "Fine Sync.".

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto

Sync.". In some cases, however, manual adjustment is needed to optimize the image.

Input Signal: Select the input signal.

1024x768

1360x768

Auto Sync.: For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image." is displayed.

No: This function does not work.

H-Pos.: Centers the image by moving it to the left or right.

V-Pos.: Centers the image by moving it up or down.

Clock: Adjust when the image flickers with vertical stripes.

Phase: Adjust when characters have low contrast or when the image flickers.

NOTE

"Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is

moved while executing "Auto Sync.".

Be sure to connect the PC to the Monitor and switch it on before starting "Auto Sync.".

It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot

be selected.

The default cursor position may not be in the center, because the screen position variable ranges

may be asymmetrical.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can

be seen on the position-setting screen.

ENG 7-1

Using a PC

Setting Audio Input

Audio Select

This function sets the terminal to output the computer audio.

The adjustment items vary depending on the input source. Select the input source corresponding to

the terminal connected to the PC and then adjust the desired item.

To perform the operation, refer to "Initial Setup" > "Input Settings" > "Audio Select".

HDMI 2

HDMI2(Digital): Select this when the Monitor and PC are connected using an HDMI-certified cable

and audio is input via the same cable.

HDMI+Analog: Select this when the Monitor and PC are connected using an HDMI-certified cable

and the audio is input via a Ø 3.5 mm stereo minijack.

NOTE

When "Audio Select" is set to "HDMI+Analog", sound will not be produced if you use only an

HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should

make an analog audio connection.

If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set "Audio

Select" to "HDMI2(Digital)".

ENG 7-2

Using a PC

Control of the Monitor

The Monitor can be controlled from a PC, control panels and other devices using the RS-232C or

IP.

Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for

the connections.

NOTE

This operation system should be used by a person who is accustomed to using computers.

IP Control

Set this function when operating the Monitor from equipment connected by LAN. To perform the

operation, refer to "Network Settings".

IP Control

When "IP Control" is selected, "Change" will be highlighted. Press ENTER.

Detailed Settings

Make the detailed settings (Login ID, password, etc.).

Follow the on-screen instructions to configure the settings.

Device Name Setting

Set the name of the Monitor displayed on other network devices.

Use the software keyboard to set the name.

See page 4-17 for details on the software keyboard.

Communication Conditions for IP

Connect to the Monitor with the following settings made for IP on the PC.

IP protocol: TCP/IP

Host IP address: Set the IP address on the Monitor menu

Service: None (Do not select Telnet or SSH)

TCP port : Set a port number on the Monitor menu (Control

port)

When you set your ID and password on the Monitor menu, you need to enter them as soon as you

connect to the

Monitor.

NOTE

When you use this function, make settings for "IP Control".

The connection will be cut off when there has been no communication for 3 minutes.

Communication Conditions for RS-232C

Set the RS-232C communication settings on the PC to match the

Monitors communication

conditions.

The Monitor's communication settings are as follows:

Baud rate: 9,600 bps

Data length: 8 bits

Parity bit: None

Stop bit: 1 bit

Flow control: None

Communication procedure

Send the control commands from the PC via the RS-232C or IP.

TheMonitor operates according to the received command and sends a response message to the PC.

Do not send multiple commands at the same time.

Wait until the PC receives the OK response before sending the next command.

If the set is switched off to stand-by, please wait for more than 20 seconds until you send the next

RS232 power-on command.

ENG 7-3

Using a PC

Control of the Monitor (Continue)

Command format

Eight ASCII codes +CR

Command 4-digits: Command. The text of four characters.

Parameter 4-digits: Parameter 0–9, x, blank, ?

Parameter

Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that 4

values are input for the parameter.)

When the input parameter is not within an adjustable range, "ERR" returns. (Refer to "Response

code format".)

Any numerical value can replace the "x" on the table.

Response code format

Normal response

Problem response

(communication error or incorrect command)

Command table

Commands not indicated here are not guaranteed to operate.

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

POWER ON

COMMAND SETTING R S P W 0 _ _ _ Off The Power On

command

rejected.

1 _ _ _ On [RS-232C] The Power On

command

accepted.

2 _ _ _ On [IP] The Power On

command

accepted.

POWER SETTING P O W R 0 _ _ _ Power Off It shifts to

standby.

1 _ _ _ Power On Power On*1

INPUT

SELECTION TOGGLE I T G D x _ _ _ (Toggle) It input-switches

by the toggle. (It

is the same as

an input change

key)

*1 For RS-232C only.

You can use "Wake On LAN (Magic Packet)" to turn on the power via LAN.

It is not possible to turn on the monitor with the IP Control command.

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL

CONTENTS.

Any numerical value can replace the "x" on the table.

ENG 7-4

Using a PC

Control of the Monitor (Continue)

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

INPUT

SELECTION 1-6 I A V D * _ _ _ 1: HDMI IN 1,

2: HDMI IN 2,

3: HDMI IN 3,

4: VIDEO IN 1,

COMPONENT/VIDEO

IN 2,

6: PC IN

AV MODE SELECTION A V M D * _ _ _ 0: (Toggle),

1: STANDARD,

2: MOVIE,

4: USER,

5: DYNAMIC (Fixed),

6: DYNAMIC,

7: PC

Although it

can choose

now, it is

toggle

operation in

inside.

VOLUME V O L M * * * _ Volume (0-100)

POSITION H-

POSITION H P O S * * * _ (-50-50) For PC input.

The screen

position

variable

ranges

depend on

the View

Mode or the

signal type.

The ranges

can be seen

on the

position-

setting

screen.

V-

POSITION V P O S * * * _ (-50-50)

CLOCK C L C K * * * _ (0-100)

PHASE P H S E * * _ _ (0-63)

CONTROL

ITEM COMMAND PARAMETER CONTROL CONTENTS

VIEW MODE W I D E * * _ _ 0: (Toggle) [AV],

1: Side Bar [AV],

2: S.Stretch [AV]

3: Zoom [AV],

4: Stretch [AV, USB-

Video, Home

Network Video or

Internet

applications],

5: Normal [PC]

7: Stretch [PC],

8: Dot by Dot [PC]

[AV],

9: Full Screen [AV]

10: Auto [USB-

Video, USB-Photo,

Home Network

Video, Photo or

Internet

applications],

11: Original [USB-

Video, USB-Photo,

Home Network

Video, Photo or

Internet applications]

0: Although it can

choose now, it is

toggle operation

in inside.

1: Only available

when 4:3 signal is

being input.

5: Only available

when 4:3 signal is

being input.

8: [PC] Available

except when

UXGA is being

input.

[AV] Only

available when

1080i/p is being

input.

9: Only available

when 720p is

being input.

10, 11: Available

when USB-Video,

USB-Photo,

Home Network

Video, Photo or

Internet

application is

used.

MUTE M U T E * _ _ _ 0: (Toggle),

1: On,

2: Off

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL

CONTENTS.

Any numerical value can replace the "x" on the table.

ENG 7-5

Using a PC

Control of the Monitor (Continue)

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

SURROUND A C S U * _ _ _ 0: (Toggle),

1: On,

2: Off

AUDIO

SELECTION A C H A x _ _ _ (Toggle)

SLEEP TIMER O F T M * _ _ _ 0: Off,

1: OFF TIMER - 30 MIN.,

2: OFF TIMER - 60 MIN.,

3: OFF TIMER - 90 MIN.,

4: OFF TIMER - 120 MIN.

5: OFF TIMER - 150 MIN.

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL

CONTENTS.

Any numerical value can replace the "x" on the table.

ENG 7-6

Using a PC

Control of the Monitor (Continue)

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

CC C L C P x _ _ _ (Toggle) Toggle operation of a closed caption.

DEVICE NAME T V N M 1 _ _ _ The device name set in “Device

Name” is displayed.

MODEL NAME M N R D 1 _ _ _ The model name of the Monitor

SOFTWARE

VERSION S W V N 1 _ _ _ The current version of the Monitor

software is displayed.

IP PROTOCOL

VERSION I P P V 1 _ _ _ The currently supported version of IP

protocol is displayed.

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL

CONTENTS.

Any numerical value can replace the "x" on the table.

ENG 7-7

Using a PC

Control of the Monitor (Continue)

CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS

REMOTE CONTROL

BUTTONS R C K Y * * _ _ 0-9: 0-9,

10: DOT,

12: POWER,

13: DISPLAY,

23: OPTION,

24: SLEEP,

31: MUTE,

32: VOL -,

33: VOL +,

34: CH ,

35: CH ,

36: INPUT,

38: MENU,

39: APPS,

40: ENTER,

41: ,

42: ,

43: ,

44: ,

45: RETURN,

46: EXIT,

49: AUDIO,

50: A (red),

51: B (green),

52: C (blue),

53: D (yellow),

61: MANUAL

NOTE

If an underbar (_) appears in the parameter column, enter a space.

If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL

CONTENTS.

Any numerical value can replace the "x" on the table.

You can use "Wake On LAN (Magic Packet)" to turn on the power via LAN.

ENG 7-8

Using a PC

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal.

Resolution Horizontal

Frequency Vertical

Frequency VESA Standard

VGA

720 x 400 31.5 kHz 70 Hz —

640 x 480

31.5 kHz 60 Hz

37.9 kHz 72 Hz

37.5 kHz 75 Hz

SVGA 800 x 600

35.1 kHz 56 Hz

37.9 kHz 60 Hz

48.1 kHz 72 Hz

46.9 kHz 75 Hz

XGA 1024 x 768

48.4 kHz 60 Hz

56.5 kHz 70 Hz

60.0 kHz 75 Hz

WXGA 1360 x 768 47.7 kHz 60 Hz

SXGA 1280 x 1024 64.0 kHz 60 Hz

SXGA+ 1400 x 1050 65.3 kHz 60 Hz

UXGA 1600 x 1200 75.0 kHz 60 Hz

1080p 1920 x 1080 67.5 kHz 60 Hz ―

VGA and XGA are registered trademarks of International Business Machines Corp.

AV Compatibility Chart

Resolution Vertical

Frequency HDMI Component

640 x 480p 59.94 Hz —

60 Hz —

720 x 480p 59.94 Hz

60 Hz

720 x 576p 50 Hz

720(1440) x 480i 59.94 Hz

60 Hz

720(1440) x 576i 50 Hz

1280 x 720p

50 Hz

59.94 Hz

60 Hz

1920 x 1080i

50 Hz

59.94 Hz

60 Hz

1920 x 1080p

24 Hz —

50 Hz

59.94 Hz

60 Hz

ENG 7-9

Using the Internet

By connecting your Monitor to a broadband system, you can access the Internet from the Monitor.

Connecting to the Internet

To connect your Monitor to the Internet, you must have a broadband Internet connection.

If you do not have a broadband Internet connection, consult the store where you purchased your

Monitor or ask your Internet service provider or telephone company.

Using an ETHERNET cable

Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the

Monitor to your broadband router (commercially available).

Network Settings

Perform the procedure below to make adjustments or to confirm the settings for accessing the

Internet.

1 Press MENU to display the MENU screen, and then press ENTER.

2 Press / to select "Network Setting", and then press ENTER.

3 Press / to select "Wired Setup and then press ENTER.

See page 4-16.

4 Press MENU to exit.

ENG 8-1

Using the Internet

If "alphabet" is selected, this switches characters between

uppercase and lowercase.

Each time you press ENTER, the character type switches.

Press ENTER to select the type of characters entered:

alphabet, or sign.

Erases text one character at a time.

Entering Text (Software Keyboard)

When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software

keyboard.

NOTE

You can enter up to 128 characters for text.

Some special characters or diacritics may not be available depending on where you enter the text.

ENG 8-2

The text you enter is displayed as you type it in.

To move the cursor (the current input position), use " " or " " on the software keyboard.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

Using the Internet

Entering Text (Software Keyboard)

(Continue)

Enter

Applies the entered information and closes the software

keyboard.

Space

Enters a space.

Clear

Erases the character string.

When the cursor is somewhere in a line: the character

string to the right of the cursor will be erased.

When the cursor is at the right end of a line: the entire line

will be erased.

Closes the software keyboard without applying the entered

information.

Buttons on the

remote control unit Description

/ / / Moves the focus. When moved at

the far edge, the focus moves to the

opposite edge.

ENTER Performs the processing for the

button currently in the focus.

EXIT Closes the software keyboard

without applying the original input

elements for the entered text.

RETURN

0-9 Directly enters the single-byte

number for that button.

• (DOT) Erases text one character at a time.

ENG 8-3

Using the Internet

Using the Browser

1 Press APPS, press / to select the browser icon from

the application window, and then press ENTER.

Press APPS again to switch back to the currently tuned

channel.

Buttons for Using the Browser

ENTER, / / /

Press / / / to select a link that you want to jump, and

then press ENTER.

EXIT

Press the button to return to the Monitor screen.

RETURN

Press the button to return to the previous page.

NOTE

Restrictions apply to window display.

Using the Application Window

During Dock Display

You can move the application icons.

Example

1 Select an application, and then press .

2 Press / to move the icon to the desired location.

Move the Icons

You can move the icons of the more commonly used

applications closer to the left.

Press / to move the icon to the desired location.

ENG 8-4

Using the Internet

Selected item Description

Allows you to go back to the previous page.

Allows you to go to the next page.

Refreshes the page.

Interrupts a page while it is loading.

Displays the home page.

Selected item Description

Displays the bookmarks list.

Displays your browsing history.

Configures browser settings.

Using the Toolbar

You can use the toolbar to control the browser and to specify

settings.

1 Press / to select a function, and then press ENTER.

Browsing Web Contents

You can display the web content you want to enjoy.

1 Press / to move to the address area in the toolbar, and

then press ENTER.

The Enter Address menu is displayed.

2 Enter an address, and then press ENTER.

The web content you want to view is displayed.

Using the Browser (Continue)

ENG 8-5

Using the Internet

Using the Browser (Continue)

CAUTION

If the power is cut due to a power failure or the Monitor

being unplugged while you are using the Internet,

information such as bookmarks or cookies may not be

saved correctly.

To users who access the Internet from a PC

When you access the Internet from this Monitor, the

procedures may not be the same as regular browser-

based access on a PC.

On some pages, video and audio, text or images may not

be displayed correctly.

Due to a large number of pictures or information, the

loading time for an internet site can be considerably

extended. Sometimes Internet pages can not be loaded.

About links

Web pages on the Internet often include "links" that allow

you to jump to other web pages (or sites).

"Links" can take various forms, including words or images,

but they always work in the same way letting you jump to

the link destination when you select them.

Selected items (such as links of text input fields) are

enclosed in a frame.

You can jump from a "link" to the corresponding link

destination.

ENG 8-6

Using the Internet

Using the Browser (Continue)

Browser Settings

You can check or modify your browser settings from the

Browser menu.

1 Press / to select " " in the toolbar, and then press

ENTER.

2 Press / / / to specify the required setting, and then

press ENTER.

ENG 8-7

Using the Internet

Using Keyboard and Mouse

You can use a keyboard or mouse for operating the Monitor

while using the browser.

When you use the USB devices, connect the device to the

USB terminal on the Monitor.

NOTE

The keyboard and mouse can only be used on a browser

screen.

The keyboard or mouse may not operate properly

depending on the application being used.

ENG 8-8

Appendix

Removing the Stand

Before detaching (or attaching) the stand, make sure to turn off the Monitor and unplug the AC

cord.

CAUTION

Do not remove the stand from the Monitor unless using an optional wall mount bracket to

mount it.

1 Unfasten the four screws used to secure the stand in place.

Example

2 Detach the stand from the Monitor.

NOTE

Be sure to always carry the Monitor by two people (90/80 inch models: three people) holding it

with two hands.

In the installation procedure, be careful not to catch your fingers between the Monitor set and the

floor.

ENG 9-1

Appendix

Setting the Monitor on the Wall

The wall mount kit commercially available allows you to mount the Monitor on the wall.

For detailed information on installing the wall mount, see the instructions provided with the product.

We recommend you to contact a technician for assistance when installing it.

SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to

install the wall mount on your own.

CAUTION

Install your wall mount on a solid wall perpendicular to the floor.

When you want to attach the wall mount to surfaces other than plaster board, please

contact your nearest retailer/adviser for additional information. If you install the Monitor

on a ceiling or slanted wall, it may fall and result in severe personal injury. Always have

two people mount the Monitor on a wall.

NOTE

Due to the terminal configuration on this Monitor, when you wall-mount this model, make sure

there is enough space between the wall and the Monitor for the cables.

To use this Monitor mounted on a wall, remove the AC cord holder on the rear of the Monitor, and

then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the

Monitor.

ENG 9-2

Appendix

Setting the Monitor on the Wall (Continue)

PN-Q901/PN-Q801

PN-Q701/PN-Q601

The location of the AC cord holder differs depending on whether it is in its shipment location (A)or

has been used as a cable tie (B).

ENG 9-3

Appendix

Setting the Monitor on the Wall (Continue)

Wall Mount Kit Specifications

Standard dimensions for wall mount kits are shown below.

The illustration is based on the PN-Q601 model as an example.

PN-Q901 PN-Q801 PN-Q701 PN-Q601

VESA screw

hole specs (A-B) 23 5/8(600)-15 3/4(400) 15 3/4(400) - 15 3/4(400)

Width a1 1 37/64(40) 2 3/8(60)

a2 13 25/64(340) 10 1/4(260)

Height

b1 7 7/8(200) 8 9/32(210) 8 43/64(220)

b2 14 49/64(375) 11 47/64(298) 10 29/32(277) 10 33/64(267)

b3 6 57/64(175) 4 7/32(107) 3 7/16(87)

c1 3 5/32(80) 3 13/64(81) 1 15/16(49) 1 31/32(50)

ENG 9-4

Unit: inch

(mm)

a1: Maximum distance from the mounting hole

a2: Maximum distance from the Monitor's center

b1: Distance between the Monitor's center and the mounting hole

b2: Maximum distance from the Monitor's center

b3: Maximum distance from the mounting hole

c1: Minimum gap

Appendix

Setting the Monitor on the Wall (Continue)

For the screws, refer to the table shown below.

90/80 inch models 70/60 inch models

Standard screws M8 (Use 1.25 pitch screws.) M6 (Use 1.0 pitch screws.)

Length(Depth of mounting holes) 15/32(12) 15/32 (12)

Quantity 4 pcs. 4 pcs.

NOTE

To use this Monitor mounted on a wall, remove the cable tie as needed.

Do not use screws that do not comply with the VESA standard screw specifications.

Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the Monitor.

Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents.

SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

Do not install the wall mount kit while your Monitor is turned on. It may result in personal injury due to electric shock.

ENG 9-5

Unit: inch

(mm)

Appendix

Troubleshooting

Problem Possible Solution

No power Check if you pressed POWER on the remote control unit.

Is the AC cord disconnected?

Has the power been turned on?

Unit cannot be

operated. External influences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after first turning off the power of the

Monitor or unplugging the AC cord and replugging it in after 1 or 2 minutes.

Remote

control unit

does not

operate.

Are batteries inserted with polarity (+, -) aligned?

Are batteries worn out? (Replace with new batteries.)

Are you using it under strong or fluorescent lighting?

Is a fluorescent light illuminated near the remote control sensor?

Picture is cut

off/with

sidebar

screen.

Is the image position correct?

Page 7-1

Are screen mode adjustments such as picture size made correctly?

Pages 4-19 to 4-21

Strange color,

light color, or

color

misalignment

Adjust the picture tone.

Pages 4-11 to 4-14

Is the room too bright? The picture may look dark in a room that is too bright.

Power is

suddenly

turned off.

Is the sleep timer set?

Pages 3-4

Check the power control settings.

Page 4-18

The unit's internal temperature has increased. Remove any objects blocking

vent or clean.

Problem Possible Solution

No picture Is connection to other components correct?

Is the correct input selected?

Pages 2-1

Is "On" selected in "Audio Only"?

Page 4-21

If the PC image is not displayed, check the following:

- When connecting a laptop PC to the Monitor, check that display

output mode of the PC is set to external monitor.

- Check the resolution setting on the PC. Is a non-compatible

signal being input?

Page 7-9

Picture quality of HD video

is poor. To enjoy HD images from external equipment, you are required to

set up HDMI connection or component connection.

If the video source is not of HD quality, HD images cannot be

displayed. Check that the video source you are viewing provides

HD images.

The HD cable/satellite set-top box may need to be configured to

output HD images via cable/satellite.

The Monitor sometimes

makes a cracking sound. This is not a malfunction. This happens when the cabinet slightly

expands and contracts according to change in temperature. This

does not affect the Monitor's performance.

Some Internet functions

used on a PC are not

available from the Monitor.

The Monitor has only limited functions compared with regular PC

browsers.

Pages 8-4 to 8-6

ENG 9-6

Appendix

Troubleshooting (Continue)

Problem Possible Solution

No sound Is connection to other components correct?

Is the volume too low?

Page 3-2

Is "Variable" selected in "Output Select"?

Page 4-7

Have you pressed MUTE on the remote control unit?

Page 3-3

Check the audio output of the connected external equipment. Is the

volume too low or muted?

When external equipment is connected via an HDMI cable, you

may need to configure the audio to be output through the HDMI

cable.

When audio is not output from external equipment connected to the

PC IN or HDMI IN 2 terminal, check the "Audio Select" setting.

Page 7-2

Even when external equipment is connected using an HDMI-

certified cable, an audio cable connection may be required

depending on the type of equipment and the media being played

back. In this case, in addition to connecting an HDMI-certified

cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo

minijack cable to the AUDIO IN terminal and set "Audio Select" to

"HDMI+Analog".

Page 7-2

When connecting a PC via an HDMI-certified cable, check the

following:

- Is the audio output of the PC configured correctly? Check the

audio output settings and output audio format in Sound Properties

on the PC.

The audio formats compatible with this Monitor are PCM and Dolby

Digital. With other formats, audio cannot be output.

- Depending on the board, only video signals may be output. In this

case, in addition to connecting an HDMI-certified cable to the HDMI

IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the

AUDIO IN terminal and set "Audio Select" to "HDMI+Analog".

Page 7-2

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails

or appear slightly delayed. This is not a malfunction, and the unit will recover when the

temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to

direct sunlight or near a heater, as this may cause the cabinet to deform and the front panel to

malfunction.

Storage temperature: -20°C to +60°C

ENG 9-7

Specifications

Monitor (For PN-Q901 model)

Item Model: PN-Q901

LCD panel Size 90" Class (90 1/64" Diagonal)

Resolution 2,073,600 pixels (1,920 x 1,080)

Audio out 10W x 2

Terminals

Back panel vertical side

HDMI IN 1 HDMI in with HDCP, ARC

HDMI IN 2 HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)

HDMI IN 3 HDMI in with HDCP, MHL

USB Photo/Music/Video mode, Software update, USB keyboard/mouse

Back panel surface side

COMPONENT IN COMPONENT IN

VIDEO IN 1 AV in

AUDIO OUT Audio out

PC IN ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in (Ø 3.5 mm stereo jack)

RS-232C 9-pin D-sub male connector

Back panel horizontal side AUDIO IN Audio in (Ø 3.5 mm stereo jack)

DIGITAL AUDIO OUT Optical Digital audio out x 1 (PCM/Dolby Digital/DTS)

ETHERNET Network connector

OSD language English, French, Spanish, German, Italian and Russian

Power Requirement AC 110-240 V, 50/60 Hz

On Mode Power 211 W

Power Consumption 290 W (0.5 W Standby with AC 230 V)

Weight Monitor + stand 150.0 lbs./68.0 kg

Monitor only 141.1 lbs./64.0 kg

Dimensions*2

W x H x D inch (mm) Monitor+ stand 80 7/8 (2054) x 48 61/64 (1243) x 17 3/32 (434)

Monitor only 80 7/8 (2054) x 47 11/16 (1211) x 4 37/64 (116)

Operating temperature 0°C to +40°C

As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures

indicated are nominal values of production units. There may be some deviations from these values in individual units.

ENG 10-1

Specifications

Monitor (For PN-Q801/701/601 models)

Item Model: PN-Q801 Model:PN-Q701 Model: PN-Q601

LCD panel Size 80" Class (80" Diagonal) 70" Class (69 1/2" Diagonal) 60" Class (60 3/32" Diagonal)

Resolution 2,073,600 pixels (1,920 x 1,080)

Audio out 10W x 2

Terminals

Back panel vertical side

HDMI IN 3 HDMI in with HDCP, MHL

USB Photo/Music/Video mode, Software update, USB keyboard/mouse

RS-232C 9-pin D-sub male connector.

Back panel surface side

HDMI IN 1 HDMI in with HDCP, ARC

HDMI IN 2 HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)

COMPONENT/VIDEO

IN COMPONENT in, AV in

VIDEO IN 1 AV in

PC IN ANALOG RGB (PC) in (15-pin mini D-sub female connector), Audio in (Ø 3.5 mm stereo jack)

AUDIO IN Audio in (Ø 3.5 mm stereo jack)

AUDIO OUT Audio out (RCA)

DIGITAL AUDIO OUT Optical Digital audio out x 1 (PCM/Dolby Digital/DTS)

ETHERNET Network connector

OSD language English, French, Spanish, Geramn, Italian and Russian

Power Requirement AC 110-240 V, 50/60 Hz

On Mode Power 173 W 125 W 104 W

Power Consumption 300 W (0.5 W Standby with AC 230 V) 180 W (0.5 W Standby with AC 230 V) 150 W (0.5 W Standby with AC 230 V)

Weight Monitor + stand 114.6lbs./52.0kg 78.3 lbs./35.5 kg 56.2 lbs./25.5 kg

Monitor only 110.2lbs./50.0kg 75.0 lbs./34.0 kg 52.9 lbs./24.0 kg

Dimensions*2

(W x H x D)(inch)

Monitor + stand 71 1/2 (1816) x 43 (1092) x 17 59/64

(455) 61 35/64 (1563) x 37 1/16 (941) x 13 3/4

(349) 53 23/64 (1355) x 32 31/64 (825) x 13 3/4

(349)

Monitor only 71 1/2 (1816) x 41 35/64 (1055) x 4 1/2

(114) 61 35/64 (1563) x 35 3/4 (908) x 3 7/16

(87) 53 23/64 (1355) x 31 3/16 (792) x 3 25/64

(86)

Operating temperature 0°C to +40°C

As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures

indicated are nominal values of production units. There may be some deviations from these values in individual units.

ENG 10-2

Trademarks

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the

United States and other countries.

and LC logo mark are

registered trademarks of SHARP Corporation. This product is embedded with LC Font

technology, which was developed by SHARP Corporation for clearly displaying easy-

to-read characters on an LCD screen. However, other non-LCD fonts are used for

displaying some screen pages.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS

Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered

Reserved.

MHL, the MHL Logo, and Mobile High-Definition Link are trademark or registered

trademarks of MHL LLC in the United States and other countries.

ENG 11-1

<< Unit: inch (mm)

Dimensional Drawings

PN-Q901

*1 Active area

*2 Thinnest part

*3 Including projecting parts

ENG 12-1

<< Unit: inch (mm)

Dimensional Drawings

PN-Q801

*1 Active area

*2 Thinnest part

*3 Including projecting parts

ENG 12-2

<< Unit: inch (mm)

Dimensional Drawings

PN-Q701

*1 Active area

*2 Thinnest part

*3 Including projecting parts

ENG 12-3

<< Unit: inch (mm)

Dimensional Drawings

PN-Q601

*1 Active area

*2 Thinnest part

*3 Including projecting parts

ENG 12-4

Software License

Information on the open-source software license.

Software composition

The software included in this product is comprised of various software components whose individual

copyrights are held by third parties.

This product also makes use of freely distributed software and software components whose

copyrights are held by third parties. These include software components covered by a GNU General

Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other

license agreement.

Obtaining source code

Some of the open source software licensors require the distributor to provide the source code with

the executable software components. GPL and LGPL include similar requirements. For information

on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and

other license agreement information.

Acknowledgements

The following open source software components are included in this product:

/bootcode/uboot

/linux-3.7.2

/system/ap/develop/busybox/busybox-1.18.4

/system/lib/develop/e2fsprogs/e2fsprogs-1.42.6

/system/lib/develop/uClibc-0.9.30.3

/system/ap/develop/mtd/util

/system/tools/squashfs

/Platform_Lib/Graphics/FontRenderer/libotf-0.9.9

/Platform_Lib/Graphics/FontRenderer/fribidi-0.10.9

/Platform_Lib/Graphics/FontRenderer/freetype-2.3.5

/Utility/tinyxml

/Application/Win32/RSSClient/tinyxml

/Include/Utility/tinyxml"

/Utility/wpa_supplicant

/system/tools/lzma

/open_source/icu-54.1

/open_source/harfbuzz/harfbuzz-0.9.35

/open_source/graphite2/graphite2-1.2.4

/src/Platform_Lib/Graphics/DirectFB/DirectFB-1.4.2

/open_source/curl/curl-7.32.0

/open_source/libwebp/libwebp-0.4.1

/open_source/FastJpegLib/jpeg-6b

/open_source/libmng/libmng-2.0.2

/open_source/Libpng

/open_source/font/freetype-2.4.11

/open_source/c-ares/c-ares-1.10.0

/open_source/openssl-1.0.1j

/open_source/expat

/open_source/zlib-1.2.3

/open_source/Tremor

/open_source/Alsa/alsa-lib-1.0.23

/open_source/picotts

/Utility/wpa_supplicant

/libmediaplayerservice/wfdisplay/spu/core/bigd*

/open_source/HTTPC

/open_source/upnp

/system/src/Platform_Lib/Graphics/JpegRenderer

/system/open_source/libpng

/system/open_source/gif

/system/open_source/libwebp

http://tv.bobitag.com/LGPL/alsa-lib-1.0.23.tgz

http://tv.bobitag.com/LGPL/curl-7.28.1.tgz

http://tv.bobitag.com/LGPL/c-ares-1.9.1.tgz

http://tv.bobitag.com/LGPL/icu-4.8.1.1.tgz

http://tv.bobitag.com/LGPL/mpg123-1.21.0.tgz

http://tv.bobitag.com/LGPL/fontconfig-2.11.0.tgz

http://tv.bobitag.com/LGPL/expat.2.0.1.tar.gz

http://tv.bobitag.com/LGPL/qt-everywhere-opensource-src-5.0.0.tgz

http://tv.bobitag.com/LGPL/openssl-1.0.1l.tgz

ENG 13-1

Software License

Software copyrights

Bootcode:

uboot

GPL V2 http://tv.bobitag.com/LGPL/uboot.tgz

Kernel:

vmlinux

GPL V2 http://tv.bobitag.com/LGPL/linux-3.7.2.tgz

busybox

GPL V2 http://tv.bobitag.com/LGPL/busybox-1.18.4.tgz

e2fsprogs

GPL V2 http://tv.bobitag.com/LGPL/e2fsprogs-1.42.6.tar.gz

http://tv.bobitag.com/LGPL/e2fsprogs-libs-1.42.6.tar.gz

uclibc

LGPL 2.1 http://tv.bobitag.com/LGPL/uClibc-0.9.30.3.tar.bz2

mkfs.jffs2

GPL V2 http://tv.bobitag.com/LGPL/jffs2.tgz

mksquashfs

GPL V2 http://tv.bobitag.com/LGPL/squashfs4.2.tar.gz

Library:

libotf

LGPL V2.1 http://tv.bobitag.com/LGPL/libotf-0.9.9.tar.gz

fribidi

LGPL V2.1 http://tv.bobitag.com/LGPL/fribidi-0.10.9.tar.gz

freetype

FTL ~ BSD http://tv.bobitag.com/LGPL/freetype-2.4.11.tar.gz

tinyxml

zlib http://sourceforge.net/projects/tinyxml/files/

openssl

Apache License 1.0 BSD

http://tv.bobitag.com/LGPL/openssl-1.0.1l.tgz

http://tv.bobitag.com/LGPL/openssl-1.0.1j.tar.gz

Utility:

wpa_supplicant

BSD http://tv.bobitag.com/LGPL/wpa_supplicant-2.4.tar.gz

lzma

public domain http://tv.bobitag.com/LGPL/lzma-4.65.tgz

Harfbuzz

MIT

http://tv.bobitag.com/LGPL/harfbuzz-0.9.35.tar.bz2

Graphite

Apache 2.0 http://tv.bobitag.com/LGPL/graphite2-1.2.4.tgz

gperftools

New BSD License http://tv.bobitag.com/LGPL/gperftools-2.2.tar.gz

directFB

LGPL V2 http://tv.bobitag.com/LGPL/DirectFB-1.4.2.tar.gz

libjpeg

JPEG

libmng

MNG License

ENG 13-2

Software License

libpng

libpng license.

FreeType

freetype

c-ares

MIT

openSSL

OpenSSL/SSLeay

expat

MIT/X

zlib

Zlib

Tremor

Xiph.org

alsa

LGPL 2.1

http://tv.bobitag.com/LGPL/alsa-lib-1.0.23.tar.gz

http://tv.bobitag.com/LGPL/alsa-lib-1.0.23.tgz

picoTTS

apache 2

LGPL 2 http://tv.bobitag.com/LGPL/JavaScriptCore.r118995.tar.gz

MIT

BSD

Http:

neon

GPL http://tv.bobitag.com/LGPL/HTTPC.tar.bz2

DLNA:

upnp

No License

http://tv.bobitag.com/LGPL/upnp.1.6.16.tar.gz

http://tv.bobitag.com/LGPL/upnp.tar.bz2

photo:

jpeg6b

public domain http://tv.bobitag.com/LGPL/jpegsrc.v6b.tar.gz

libpng

public domain

http://tv.bobitag.com/LGPL/libpng-1.6.7.tar.gz

http://tv.bobitag.com/LGPL/libpng-1.6.17.tar.gz

giflib

public domain http://tv.bobitag.com/LGPL/giflib-5.1.1.tar.bz2

libwebp

public domain

http://tv.bobitag.com/LGPL/libwebp-0.4.1.tar.gz

http://tv.bobitag.com/LGPL/libwebp-0.4.3.tar.gz

Others:

alsa

LGPL 2.1

http://tv.bobitag.com/LGPL/alsa-lib-1.0.23.tar.gz

http://tv.bobitag.com/LGPL/alsa-lib-1.0.23.tgz

curl

MIT/X derivate license

http://tv.bobitag.com/LGPL/curl-7.28.1.tgz

http://tv.bobitag.com/LGPL/curl-7.32.0.tar.gz

ENG 13-3

Software License

c-ares

C89 compatibility, MIT licensed

http://tv.bobitag.com/LGPL/c-ares-1.9.1.tgz

http://tv.bobitag.com/LGPL/c-ares-1.10.0.tar.gz

icu

ICU license , a simple, permissive non-copyleft free software license, compatible with the GNU GPL.

http://tv.bobitag.com/LGPL/icu-4.8.1.1.tgz

http://tv.bobitag.com/LGPL/icu4c-53_1.tgz

http://tv.bobitag.com/LGPL/icu4c-54_1-src.tgz

mpg123

LGPL 2.1

http://tv.bobitag.com/LGPL/mpg123-1.21.0.tgz

fontconfig

http://tv.bobitag.com/LGPL/fontconfig-2.11.0.tgz

expat

same as the MIT/X Consortium license.

http://tv.bobitag.com/LGPL/expat.2.0.1.tar.gz

http://tv.bobitag.com/LGPL/expat-1.95.tgz

QT(including Webkit)

LGPL 2.1 http://tv.bobitag.com/LGPL/qt-everywhere-opensource-src-5.0.0.tgz

openssl

Apache License 1.0 BSD

http://tv.bobitag.com/LGPL/openssl-1.0.1j.tar.gz

http://tv.bobitag.com/LGPL/openssl-1.0.1l.tgz

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

51 Franklin Street, Fifth Floor, Boston, MA

02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing

it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By

contrast, the GNU General Public License is intended to guarantee your freedom to share and

change free software--to make sure the software is free for all its users. This General Public License

applies to most of the Free Software Foundation's software and to any other program whose authors

commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser

General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses

are designed to make sure that you have the freedom to distribute copies of free software (and

charge for this service if you wish), that you receive source code or can get it if you want it, that you

can change the software or use pieces of it in new free programs; and that you know you can do

these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to

ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you

distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the

recipients all the rights that you have. You must make sure that they, too, receive or can get the

source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which

gives you legal permission to copy, distribute and/or modify the software.

ENG 13-4

Software License

Also, for each author's protection and ours, we want to make certain that everyone understands that

there is no warranty for this free software. If the software is modified by someone else and passed

on, we want its recipients to know that what they have is not the original, so that any problems

introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger

that redistributors of a free program will individually obtain patent licenses, in effect making the

program proprietary. To prevent this, we have made it clear that any patent must be licensed for

everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright

holder saying it may be distributed under the terms of this General Public License. The "Program",

below, refers to any such program or work, and a "work based on the Program" means either the

Program or any derivative work under copyright law: that is to say, a work containing the Program or

a portion of it, either verbatim or with modifications and/or translated into another language.

(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is

addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are

outside its scope. The act of running the Program is not restricted, and the output from the Program

is covered only if its contents constitute a work based on the Program (independent of having been

made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in

any medium, provided that you conspicuously and appropriately publish on each copy an appropriate

to the absence of any warranty; and give any other recipients of the Program a copy of this License

along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer

warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based

on the Program, and copy and distribute such modifications or work under the terms of Section 1

above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files

and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is

derived from the Program or any part thereof, to be licensed as a whole at no charge to all third

parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when

started running for such interactive use in the most ordinary way, to print or display an

announcement including an appropriate copyright notice and a notice that there is no warranty (or

else, saying that you provide a warranty) and that users may redistribute the program under these

conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is

interactive but does not normally print such an announcement, your work based on the Program is

not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are

not derived from the Program, and can be reasonably considered independent and separate works in

themselves, then this License, and its terms, do not apply to those sections when you distribute them

as separate works. But when you distribute the same sections as part of a whole which is a work

based on the Program, the distribution of the whole must be on the terms of this License, whose

permissions for other licensees extend to the entire whole, and thus to each and every part

regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by

you; rather, the intent is to exercise the right to control the distribution of derivative or collective

works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a

work based on the Program) on a volume of a storage or distribution medium does not bring the

other work under the scope of this License.

ENG 13-5

Software License

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code

or executable form under the terms of Sections 1 and 2 above provided that you also do one of the

following:

a) Accompany it with the complete corresponding machine-readable source code, which must be

distributed under the terms of Sections 1 and 2 above on a medium customarily used for software

interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge

no more than your cost of physically performing source distribution, a complete machine-readable

copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above

on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source

code. (This alternative is allowed only for noncommercial distribution and only if you received the

program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For

an executable work, complete source code means all the source code for all modules it contains,

plus any associated interface definition files, plus the scripts used to control compilation and

installation of the executable. However, as a special exception, the source code distributed need not

include anything that is normally distributed (in either source or binary form) with the major

components (compiler, kernel, and so on) of the operating system on which the executable runs,

unless that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated

place, then offering equivalent access to copy the source code from the same place counts as

distribution of the source code, even though third parties are not compelled to copy the source along

with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided

under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is

void, and will automatically terminate your rights under this License. However, parties who have

received copies, or rights, from you under this License will not have their licenses terminated so long

as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else

grants you permission to modify or distribute the Program or its derivative works. These actions are

prohibited by law if you do not accept this License. Therefore, by modifying or distributing the

Program (or any work based on the Program), you indicate your acceptance of this License to do so,

and all its terms and conditions for copying, distributing or modifying the Program or works based on

it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient

automatically receives a license from the original licensor to copy, distribute or modify the Program

subject to these terms and conditions. You may not impose any further restrictions on the recipients'

exercise of the rights granted herein. You are not responsible for enforcing compliance by third

parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other

reason (not limited to patent issues), conditions are imposed on you (whether by court order,

agreement or otherwise) that contradict the conditions of this License, they do not excuse you from

the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations

under this License and any other pertinent obligations, then as a consequence you may not distribute

the Program at all. For example, if a patent license would not permit royalty-free redistribution of the

Program by all those who receive copies directly or indirectly through you, then the only way you

could satisfy both it and this License would be to refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the

balance of the section is intended to apply and the section as a whole is intended to apply in other

circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims

or to contest validity of any such claims; this section has the sole purpose of protecting the integrity

of the free software distribution system, which is implemented by public license practices. Many

people have made generous contributions to the wide range of software distributed through that

system in reliance on consistent application of that system; it is up to the author/donor to decide if he

or she is willing to distribute software through any other system and a licensee cannot impose that

choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of

this License.

ENG 13-6

Software License

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by

copyrighted interfaces, the original copyright holder who places the Program under this License may

add an explicit geographical distribution limitation excluding those countries, so that distribution is

permitted only in or among countries not thus excluded. In such case, this License incorporates the

limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public

License from time to time. Such new versions will be similar in spirit to the present version, but may

differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of

this License which applies to it and "any later version", you have the option of following the terms and

conditions either of that version or of any later version published by the Free Software Foundation. If

the Program does not specify a version number of this License, you may choose any version ever

published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution

conditions are different, write to the author to ask for permission. For software which is copyrighted

by the Free Software Foundation, write to the Free Software Foundation; we sometimes make

exceptions for this. Our decision will be guided by the two goals of preserving the free status of all

derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY

FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN

OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES

PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO

THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE

PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,

REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING

WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR

REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,

INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO

LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU

OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER

PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the

best way to achieve this is to make it free software which everyone can redistribute and change

under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each

source file to most effectively convey the exclusion of warranty; and each file should have at least the

"copyright" line and a pointer to where the full notice is found.

one line to give the program's name and an idea of what it does.

name of author

This program is free software; you can redistribute it and/or modify it under the terms of the GNU

General Public License as published by the Free Software Foundation; either version 2 of the

License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without

even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the GNU General Public License for more details.

ENG 13-7

Software License

You should have received a copy of the GNU General Public License along with this program; if not,

write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,

USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive

mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free

software, and you are welcome to redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General

Public License. Of course, the commands you use may be called something other than `show w' and

`show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a

"copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes

passes at compilers) written by James Hacker.

signature of Ty Coon, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If

your program is a subroutine library, you may consider it more useful to permit linking proprietary

applications with the library. If this is what you want to do, use the GNU Lesser General Public

License instead of this License.

ENG 13-8

Table of Contents

Sharp PN-Q601E User Manual

Related Manuals