Table of Contents
- Introduction
- Preparations
- Wireless mode screen
- Displaying the computer screen
- Actions when a screen is displayed (touch-applicable models only)
- Exiting
- Settings
- Starting from a commercially available USB flash drive
- Uninstalling the connection software
- Using as a whiteboard (Direct Drawing) (touch-applicable models only)
- Intellectual Property Rights and Other Matters
Sharp PNZB03W User Manual
Displayed below is the user manual for PNZB03W by Sharp which is a product in the Video Switches category. This manual has pages.
Related Manuals
PN-ZB03W
WIRELESS BOARD
OPERATION GUIDE
2
Contents
Introduction ................................................................................................................................................................... 3
Preparations .................................................................................................................................................................. 5
LCD monitor operation .............................................................................................................................................. 8
Connect the computer to the wireless board ............................................................................................................. 9
MirrorOp for SHARP preparations .......................................................................................................................... 12
Start MirrorOp for SHARP ....................................................................................................................................... 13
Wireless mode screen ................................................................................................................................................ 15
Displaying the computer screen ............................................................................................................................... 16
Operation from the monitor (touch-applicable models only) ................................................................................... 16
Operation from the connection software ................................................................................................................. 17
Controlling the computer whose screen is displayed (Conference control mode) .................................................. 22
Displaying the image in a web browser (WebSlides) .............................................................................................. 23
Displaying a computer screen on multiple monitors ................................................................................................ 24
Actions when a screen is displayed (touch-applicable models only) ................................................................... 25
Drawing on the screen with a pen (Direct Drawing) ................................................................................................ 25
Saving the screen as an image le ......................................................................................................................... 26
Exiting .......................................................................................................................................................................... 27
Settings ........................................................................................................................................................................ 28
Starting from a commercially available USB ash drive ........................................................................................ 32
Uninstalling the connection software ....................................................................................................................... 33
Using as a whiteboard (Direct Drawing) (touch-applicable models only) ............................................................. 34
Intellectual Property Rights and Other Matters ....................................................................................................... 36
E
Important Information
• This product has been shipped after strict quality control and product inspection. If, however, you nd any failure or
malfunction, contact your product dealer.
• Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a
third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is
recognized under law.
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not
permitted.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for
product improvement without prior notice.
About this manual
• The screens and procedures are examples. The contents or details may vary depending on the screen conguration and OS
version, etc. Windows 7 is used as an example in this manual.
• This manual does not contain basic operating instructions for Windows and Mac OS.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
• Apple, App Store, Mac, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
• Intel, Celeron, and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the U.S.A.
and other countries.
• MirrorOp is a registered trademark of Awind, Inc.
• Google, Android and Google Play are trademarks or registered trademarks of Google Inc.
• The trademark, Android, is used under license from Google Inc.
• The trademark, iOS, is used under license from Cisco Systems, Inc., in the U.S. and other countries.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
3
Introduction
Please update to the latest version of the rmware. Use the Information Display Downloader on the CD-ROM to download the
rmware, and run the update with “Admin” – “Firmware Upgrade” – “Firmware Upgrade”. (See page 31.)
n Wireless
• On the monitor tted with wireless board you can display a screen of a computer that is connected to the same network as
the wireless board.
• You can display the screen by wireless LAN.
Computer
A
A
n Simultaneous display
• You can display the screens of up to 4 computers at once.
A
A
B
B
C
C
D
D
n Direct Drawing (touch-applicable models only)
• You can use the monitor as a white board. (See page 34.)
• Using a touch pen, you can write on the displayed screen in Wireless mode. (See page 25.)
E
4
n Conference control mode
• A conference admin can be designated to manage which computer screens are displayed. (See page 22.)
n WebSlides
• The screen that is displayed in Wireless mode appears in the web browser of the computer that is connected to the wireless
board. (See page 23.)
Caution
• To keep the performance of the wireless board stable, put the monitor in the Power off (Standby mode) state once a day.
TIPS
• You can connect up to 10 devices to the wireless board.
• The wireless LAN communication range is about 10 m.
In the following cases, the communication speed may slow down or communication may not be possible.
- An obstacle is present
- Interference occurs with another wireless device using the same frequency
- Electromagnetic interference occurs due to the magnetic eld or static electricity of a microwave oven or other device
- When the transmission speed is slow, appears.
• The monitor may reboot due to external load noise, static electricity, or other factors. This will break the wireless connection
between the wireless board and computer, so in this event, you will need to reestablish the connection.
• The computer screen information is sent to the wireless board and displayed on the monitor.
For this reason, there may be a delay in the display or it may not be possible to display the screen correctly.
Correct operation may not be possible from some applications.
E
5
Preparations
E
Connect the wireless board to your computer.
After connecting, congure wireless board settings if needed to connect to an existing network.
For details, consult your network administrator.
Caution
• Due to legal restrictions, the wireless board cannot be connected to a public wireless LAN access point.
n Connecting the wireless adapter
To connect your computer by wireless, install the wireless adapter (supplied) on the wireless board.
1. Remove the screw next to the wireless adapter port on the wireless board.
Wireless adapter port
2. Insert the wireless adapter (supplied) into the wireless adapter port.
Wireless
adapter
3. Attach the wireless adapter cover (supplied), and fasten with the screw you removed in step 1.
Wireless
adapter
cover
6
E
n Connecting only the wireless board and the computer
Directly connect the wireless board and the computer by wireless LAN.
When connecting for the rst time, connect directly as well.
Computer
n Connecting the wireless board to an existing network by wired LAN
If an access point already exists:
Connect the wireless board to the existing network by wired LAN.
Connect the computer to the wireless board from an existing access point.
Network
Computer
Connect by
wired LAN
Wireless
LAN
access
point
• Set the wireless board appropriately for the existing network.
If there is no access point:
Connect the wireless board to the existing network by wired LAN.
Connect the computer to the access point of the wireless board.
Connect with the
computer as a wireless
LAN access point
Network
Computer
• Set the wireless board appropriately for the existing network.
• Set the wireless board to access point mode.
* The wireless LAN access point function of the wireless board cannot be used when the monitor power is off.
7E
n Connecting the wireless board to an existing network by wireless LAN
Connect the wireless board and computer to an access point of the existing network by wireless LAN.
Connect to the wireless LAN access point
Wireless
LAN
access
point
Network
Computer
• Set the wireless board appropriately for the existing network access point.
• Set the wireless board to client mode. (See page 30.)
n Using an existing network access point to display the screen of 1 computer on multiple
monitors
You can display a screen on up to 4 monitors.
Connect the wireless board to the existing network by wired LAN.
Connect the computer to the wireless board from an existing access point.
Network
Computer
Wireless
LAN
access
point
Connect by wired LAN
(maximum of 4)
• Set the wireless board appropriately for the existing network.
8
E
LCD monitor operation
n Wireless settings
You can change the settings below in “COMMUNICATION SETTING” of the SETUP menu. Depending on the monitor, some
menu items may not appear.
WIRELESS SETTING
WIRELESS FUNCTION .................... Set whether or not the wireless board’s wireless LAN is used.
Even when this is set to OFF, the LAN terminal of the wireless board can be used.
* When the setting is changed, the monitor restarts.
CONNECT AUTO INPUT SELECT ... Set whether or not the input mode automatically changes to OPTION when a video
signal is input via the wireless board.
n Change the monitor to OPTION mode
To use the wireless board, change the input mode to OPTION. The home screen of Wireless mode appears.
IP AddressSSID (Host Name) Passcode
* Some icons do not appear on models that are not touch-applicable. (See page 15.)
TIPS
• When the power is in the off state, the wireless LAN access point function of the wireless board cannot be used.
• Even if LOGO SCREEN is set to OFF in the OTHERS menu, the “MirrorOp” logo is displayed when the OPTION input mode
changes.
• The following functions cannot be set in the Wireless Board.
HDMI AUTO VIEW, HOT PLUG CONTROL
• When you rst display the home screen after installing the wireless board, the wireless board may restart.
9E
Connect the computer to the wireless board
Directly connect the computer to the wireless board.
When using a different method, connection is necessary as well to change the settings from the factory default settings.
In addition, read your computer’s manual.
TIPS
• The factory default setting for the wireless board’s wireless LAN is 2.4 GHz.
n Windows
1. Click on the taskbar.
2. Select the wireless board from the wireless network list.
The SSID of the wireless board is shown in the home screen of Wireless mode.
Caution
• The factory default setting for wireless LAN security is not enabled.
For security, set “Encryption” (encryption method) and a “Key”. (See page 11.)
10
E
n Mac OS
1. Click “System Preferences” from the Apple menu ( ).
2. Click “Network”.
3. Click “Wi-Fi” and select the wireless board from the wireless network list.
The SSID of the wireless board is shown in the home screen of Wireless mode.
Caution
• The factory default setting for wireless LAN security is not enabled.
For security, set “Encryption” (encryption method) and a “Key”. (See page 11.)
11 E
n Security and key settings
For wireless LAN security, set “Encryption” (encryption method) and a “Key”.
TIPS
• A security warning may appear in some web browsers.
Follow the instructions in the web browser and continue the procedure.
1. Start the computer’s web browser.
2. Enter the IP address shown on the home screen of Wireless mode in the address bar of the web browser.
The settings screen appears.
3. Click “Admin”.
4. Enter the password and click “Login”.
The default password is “admin”.
5. Click “WLAN Setup”.
6. Set “Encryption” and a “Key”.
7. Click “Apply”.
8. Click “OK”.
Restart the wireless board.
Connect the computer to the wireless board. (See pages 9 or 10.)
For the security key, specify the key that you set in the above.
12
E
MirrorOp for SHARP preparations
To display the computer screen on the monitor by wireless LAN, connection software (MirrorOp for SHARP) is required.
The connection software is in the wireless token.
First read the software license agreement.
To use the connection software, you must agree to the software license agreement. For the software license agreement, refer to
the le below in the wireless token.
\Installer\EULA-EN.txt
There are 2 methods for using the connection software:
• Use the connection software in the wireless token
• Install the connection software on the computer to be used from the wireless token
For example,
• On computers that are not used frequently, you can use the connection software in the wireless token
• On frequently used computers, you can install the connection software
TIPS
• To use multi-touch on touch-applicable models, use the connection software you installed.
• If you want to use a token for multiple computers at the same time, you can enable starting of the connection software from a
commercially available USB ash drive. (See page 32.)
n Connecting the wireless token
No preparations are needed. Start the connection software from the wireless token. (See page 13.)
n Installing the connection software from the wireless token (Windows)
Caution
• This can only be done by a user with administrator authority.
1. Connect the wireless token to the computer.
2. Double-click the setup program in the wireless token.
\Installer\Windows installer\SHMirrorOp_Win_inst.msi
3. Follow the on-screen instructions.
• When the “User Account Control” screen appears, click “Yes” (or “Allow”).
• When a security warning screen (The publisher could not be veried.) appears, click “Allow”.
This completes the connection software installation procedure.
Next, start the connection software.
TIPS
• The connection software can also be downloaded from the wireless board to the computer. (See page 28.)
13 E
n Installing the connection software from the wireless token (Mac OS)
Caution
• To install, an administrator name (user name) and password are required.
1. Connect the wireless token to the computer.
2. Double-click the installation le in the wireless token.
\Installer\Mac installer\SHMirrorOp_Mac.dmg
3. Drag the “SHMirrorOp_Mac.app” icon to the “Applications” folder.
Follow the on-screen instructions.
• If a screen prompting you to enter the name and password appears, enter the name and password of the administrator and
click “Install Software” (or “OK”).
• If the “When this software nishes installing, you must restart your computer. Are you sure you want to install the software
now?” screen appears, click “Continue Installation”.
This completes the connection software installation procedure.
Next, start the connection software.
TIPS
• The connection software can also be downloaded from the wireless board to the computer. (See page 28.)
• In some cases it may be necessary to install Sound Flower.pkg or Extend desktop.pkg.
Start MirrorOp for SHARP
Start the connection software (MirrorOp for SHARP) on the computer, and connect to the wireless board.
n Starting from the wireless token
1. Connect the wireless token to the computer.
14
E
2. Windows: Double-click “SHMirrorOp_Win.exe” in the Autoplay screen.
If the Autoplay screen does not appear, open the wireless token and double-click “SHMirrorOp_Win.exe”.
Mac: Open the wireless token and double-click “SHMirrorOp_Mac.app”.
The connection software starts.
3. Click “ ”, select the wireless board to be connected, and click “CONNECT”.
The host name of the wireless board is shown in the home screen of Wireless mode.
4. Enter the passcode and click “OK”.
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless board.
n Starting from the installed/downloaded software
1. Double-click “MirrorOp for SHARP”.
The connection software starts.
2. Click “ ”, select the wireless board to be connected, and click “CONNECT”.
The host name of the wireless board is shown in the home screen of Wireless mode.
3. Enter the passcode and click “OK”.
The passcode is shown in the home screen of Wireless mode.
The computer connects to the wireless board.
TIPS
• The passcode changes for security.
You can change the settings to make the passcode permanent, or connect without entering the passcode. (See page 28.)
15
Wireless mode screen
E
In the home screen that appears on the monitor in Wireless mode, you can select computers to be connected and set various
functions.
1
4
32
5
6
7
8
9
1. Shows how to connect to the wireless board.
2. Shows the IP address of the wireless board.
3. Shows the SSID (Host Name) of the wireless board.
4. Shows the passcode.
The following items only appear on touch-applicable models.
5. Show a list of the connected computers.
6. You can change the language used in the wireless board screen.
You can enable starting of the connection software from a commercially available USB ash drive. (See page 32.)
7. Specify whether or not a screen is displayed on the monitor by computer operation. The selection changes each time you
touch this.
: Prohibit screen display by operation from another computer
: Allow screen display by operation from another computer
8. You can display the screens of up to 4 computers at once.
9. Displays the whiteboard (Direct Drawing) screen. *
* This icon will be added when the wireless board rmware is updated. (See page 31.)
16
Displaying the computer screen
E
Operation from the monitor (touch-applicable models only)
n Displaying the screen
Select the computer to be displayed from the computers that are currently connected to the wireless board.
1. Touch “Device in connection” in the home screen of Wireless mode.
A list of the currently connected computers appears.
2. Touch the computer to be displayed.
The screen of the computer is displayed on the monitor.
Toolbar (See page 25.)
n Displaying multiple screens at once
You can display the screens of up to 4 computers at once.
The monitor screen is divided into 4 partitions, and you can select the computer that appears in each partition.
1. Touch “Split Screen” ( ) in the home screen of Wireless mode.
1
1. Add User
The computers that are currently connected appear. Select the computers to be displayed.
17 E
Operation from the connection software
Operate from the connection software on the computer whose screen is displayed.
TIPS
• Screen display by operation from the computer must be allowed. ( )
• On touch-applicable models, you can also operate by touching the screen on the monitor.
1. Click “Play” ( ) in the connection software.
The screen of the computer is displayed on the monitor.
Toolbar (See page 25.)
* Only appears when touch-
applicable model is used.
1 2 3 4
5 6 7
1 2 3 4
7
1.
Wireless boards found from the computer appear. (See page 19.)
2. Split Screen
Set 4-screen display.
3. Play
The screen of the computer is displayed on the monitor.
During screen display, “Stop” ( ) and “Pause” ( ) appear.
4. Mute
Mute the audio of the currently connected device.
Click when the audio is muted to unmute.
5. Menu
Preferences : Congure settings for the connection software. (See page 20.)
Capture & Save screen : Save the screen as an image le (JPEG). (See page 21.)
Disconnect : Break the connection with the wireless board.
About : Display the version and license information of the connection software.
Quit : Exit the connection software.
6. Minimize
Minimize the operation screen.
7. Close
Exit the connection software. (See page 27.)
18
E
n Stopping the display
You can stop display of the computer screen on the monitor.
1. Click “Stop” ( ).
Return to Wireless mode screen.
n Pausing the display
You can pause the display of the computer screen on the monitor. When paused, the screen will not change even if an action is
performed on the computer.
1. Click “Pause” ( ).
2. To resume the display, click “Play” ( ).
n 4-screen display
1. Click “Split Screen” ( ).
2. Select the display location.
: Full-screen display / : Upper left display / : Upper right display / : Lower left display /
: Lower right display
19 E
n Connection software screen
1
6
8
9
10
7
2345
1.
Return to the operation screen.
2. Wireless board list
The wireless boards (host name) found by the computer are displayed.
3. Favorites
Wireless boards (host name) that have been saved as favorites are displayed.
4. Refresh
Refresh the list.
5. Search
Search for a specied wireless board in the list.
6. List
The list of wireless boards or favorites are displayed.
: Currently connected wireless board
: Break the connection with the wireless board.
(Appears when you hover over the connected wireless board with the mouse cursor.)
: Unconnected wireless board
7. Host name / IP address input
You can directly enter the host name or IP address of the desired wireless board to connect the computer to that wireless
board.
8. Settings
Start the web browser and congure wireless board settings. (See page 28.)
(Appears when you hover over the connected wireless board with the mouse cursor.)
9. /
To add a wireless board to the favorites list, click . (Appears as )
To delete a wireless board from the favorites list, click . (Appears as )
10. CONNECT
Connect the computer to the wireless board.
(Appears when you hover with the mouse cursor.)
20
E
n Preferences
Congure connection software settings.
1. Click “Menu” ( ) in the connection software.
2. Click “Preferences”.
1 2 345
1. General
Name Set the computer name used for connection to the wireless board.
Characters other than half-width alphanumeric characters may not display correctly.
Allows controlling from
tablets
Select this to display the computer in the list screen of MirrorOp Receiver by Awind, Inc.
Allows screen projection
be redirected to
browsers (temporary)
Select to display the screen on another computer using the WebSlides function.
Enable saving the screen as an image le even in the 4-screen display.
Allows control inputs
from receivers (touch-
applicable models only)
Select to enable operation of the computer displayed by wireless by touching the monitor.
By default, always mute
projection audio.
Select to automatically mute the audio when displaying a computer screen on the monitor.
Always on top Select to always move the connection software to the front.
Disable Aero Select to disable Windows Aero.
2. Favorites
Default List Set the default display for the connection software wireless board list.
Import Retrieve a wireless board that has been saved.
Export Save a wireless board that has been added to the favorites.
3. Advanced
Mode Set whether the desktop is duplicated or extended when displaying a computer screen on the
monitor.
Quality Set the image quality of the computer screen displayed on the monitor.
When “Best” is set, more time may be required for processing.
Resolution Setting Set the resolution of the computer screen displayed on the monitor.
Always ask: Conrm the resolution each time a screen is displayed.
Always change: Automatically change the resolution.
Never ask: Display at the resolution of the computer desktop.
Aspect Ratio Set whether the aspect ratio is adjusted to the screen or remains unchanged when a computer
screen displayed on the monitor.
Encode Format Set the data format used to send screen data.
Normally “Automatic” should be used.
“JPEG” is a high quality format, but increases the load on the network.
“H.264” reduces the data size and lightens the load on the network.
21 E
4. HotKey
You can assign connection software actions to keyboard keys.
5. About
Display the version and license information of the connection software.
n Saving the displayed screen as an image le
Save the currently displayed screen as an image le (JPEG).
An image le can only be saved from the computer that is displayed. Perform these steps from the computer that is being
displayed.
1. Click “Menu” ( ) in the connection software.
2. Click “Capture & Save screen”.
3. Specify a le name and save location, and click “Save”.
TIPS
• In the 4-screen display, only the screens will be saved of the computers for which “Allows screen projection be redirected to
browsers (temporary)” is selected in Preferences of the connection software.
22
E
Controlling the computer whose screen is displayed (Conference control
mode)
When multiple computers are connected to the wireless board, the computer whose screen is displayed and the display position
can be controlled from one of the computers (Conference admin).
Perform these steps from the conference admin’s computer.
1. Start the computer’s web browser.
2. Enter the IP address shown on the home screen of Wireless mode in the address bar of the web browser.
The settings screen appears. You can also access the settings screen by clicking the settings button in the connection
software. (See page 19.)
3. Click “Conference Control”.
Enter the password and click “Login”.
The default password is “moderator”.
4. Select the “Allow control from this page only.” checkbox.
You will only be able to control the display of computers whose checkboxes are selected.
2
3
4
5
1
1. Computers connected to the wireless board are shown.
2. The IP addresses of the computers connected to the wireless board are shown.
3. Control display of each computer.
: Full screen display
: Display in upper left screen of four-screen display
: Display in upper right screen of four-screen display
: Display in lower left screen of four-screen display
: Display in lower right screen of four-screen display
: Stop display
: Break connection
4. Change the input mode of the monitor.
5. Change the PIP mode of the monitor.
5. When you are ready to exit, remove the checkmark from “Allow control from this page only.”, and click “Logout”.
23 E
Displaying the image in a web browser (WebSlides)
You can share a screen displayed in Wireless mode, and display the screen in the web browser on other computer.
1. Display the screen 2. Display in the web browser
A
A
A
A
A
TIPS
• “Allows screen projection be redirected to browsers (temporary)” must be selected in advance in the connection software
settings of the computer whose screen is displayed (1. above). (See page 20.)
• A security warning may appear in some web browsers.
Follow the instructions in the web browser and continue the procedure.
n Viewing the screen from a web browser
Perform these steps on the computer whose screen you want to display (2. above).
1. Start the computer’s web browser.
2. Enter the IP address shown on the home screen of Wireless mode in the address bar of the web browser.
The settings screen appears.
3. Click “WebSlides”.
The screen displayed on the monitor is displayed.
n WebSlides screen
3456 782
1
1. Shows the screen that is displayed on the monitor.
2. Return to the settings screen.
3. Pause display of the screen. Even if the monitor display changes, the browser display will not change.
4. Save the currently displayed screen as an image le (JPEG).
5. Display at the screen size displayed on the monitor.
6. Fit the displayed screen to the size of the web browser window.
7. Refresh the screen display.
8. Set the next display refresh interval.
TIPS
• In the 4-screen display, only the screens will be saved of the computers for which “Allows screen projection be redirected to
browsers (temporary)” is selected in Preferences of the connection software.
• By setting “Auto Refresh Interval” in “WebSlides Setup” of “Admin”, you can continuously refresh the WebSlides screen. (See
page 31.)
24
E
Displaying a computer screen on multiple monitors
You can display a computer screen on multiple wireless boards on the same network. (Maximum of 4)
We recommend that the wireless boards be connected by wired LAN.
Network
Computer
Wireless
LAN
access
point
Connect by wired LAN
(maximum of 4)
A
AA
AA
Perform these steps from the wireless board list in the connection software. (See page 19.)
1. Select the wireless board to be connected, and click “CONNECT”.
Do this for each wireless board that you want to connect.
2. Click “Play” ( ).
25 E
Actions when a screen is displayed
(touch-applicable models only)
Using a touch pen, you can write in the screen.
TIPS
• The touch operation mode varies depending on the connection software starting method and OS.
Starting method OS Touch Operation Mode
Start after installing Windows 8.1 / 10 Multi-Touch Mode
Windows 7 / Mac OS Mouse Mode
Start from wireless token Windows 7 / 8.1 / 10
Mac OS
Mouse Mode
Application downloaded from
wireless board
• Incorrect operation may sometimes occur even when operating the computer by touching the monitor.
• The function buttons on the touch pen cannot be used. Multiple touch pens cannot be used at the same time.
Drawing on the screen with a pen (Direct Drawing)
1. Touch “Toolbar” ( ).
Display the toolbar.
123456 7
1. Pen
Draw a line on the screen.
Touch while “Pen” is selected to change the thickness or color.
2. Mouse
Activate mouse mode. You can operate the displayed computer by touch operation.
3. Eraser
Touch on handwritten data to erase the data.
Touch while “Eraser” is selected to change the size of the eraser.
4. Erase all
Erase all handwritten data.
5. Save
Save the currently displayed screen as an image le (JPEG).
6. Lock
Touch to prevent the screen display from being changed from other computers.
Touch again to unlock.
7. Home
Return to the home screen of Wireless mode.
26
E
Caution
• When the power is turned off, handwritten data is lost. Always save any handwritten data you need before turning off the
power.
• Handwritten data will be lost if the display changes, such as when you display another computer or change to split screen
display.
You can lock the screen to prevent the display from changing.
Saving the screen as an image le
You can save the screen and handwritten data displayed on the monitor as an image le (JPEG).
You can save the image to the computer being displayed or to a commercially available USB ash drive connected to the
wireless board.
1. When saving the image to a USB ash drive, connect the USB ash drive to the wireless board.
2. Touch “Save” ( ) on the toolbar.
When saving to a computer: Specify the save location and le name.
When saving to a USB ash drive: The le is saved with the le name “B0000001.jpg” in the “Annotation” folder of the USB
ash drive.
(The number in the le name is successively incremented up to 9999999, after which it returns to 0000001.)
Caution
• Set the correct date and time in the monitor.
The monitor date and time is used for the le time stamp. Files will not be given a time stamp if the monitor does not have a
date and time setting.
27
Exiting
E
n Exiting the connection software
1. Click “Close” ( ).
The connection software closes.
28
Settings
E
Congure wireless board settings.
TIPS
• A security warning may appear in some web browsers.
Follow the instructions in the web browser and continue the procedure.
1. Start the computer’s web browser.
2. Enter the IP address shown on the home screen of Wireless mode in the address bar of the web browser.
The settings screen appears. You can also access the settings screen by clicking the settings button in the connection
software. (See page 19.)
n Download
Quick Executable application
(Guest)
Download the connection software in an executable state.
Installation is not necessary.
Installer Download the installer for the connection software.
After downloading the installer to your computer, install the software.
Download Device Prole Download the prole for connection of the wireless board.
If you are using the installed connection software, double-click the prole to connect the
computer to the wireless board from which the prole is downloaded.
n Conference Control
The password entry screen appears.
Enter the password for Conference Control and click “Login”. (The default password is “moderator”.)
Display
Control
Input You can change the input mode of the monitor. After changing the mode, click “Apply”.
PIP You can change the PIP mode of the monitor. After changing the mode, click “Apply”.
Allow control from this page
only.
Use in conference control mode. (See page 22.)
n Admin
The password entry screen appears.
Enter the password for Admin and click “Login”. (The default password is “admin”.)
After changing the setting, click “Apply”.
System Status The system state is displayed.
You can check the MAC address.
Device Setup Device Setup Code
Set the passcode used to connect to the wireless board.
Disable: Connect to the wireless board without entering a passcode.
Random: The passcode changes.
Use the following code: Fix to the numeric value entered for the passcode.
Pairing
settings *
Apply Controller WLAN settings
Use the wireless board’s wireless LAN settings for SSID, encryption, and the key.
Apply the following WLAN settings
Select this to enter the SSID, encryption, and key manually.
* This setting will be added when the wireless board rmware is updated. (See page 31.)
29 E
Network
Setup
Host Name
and Domain
Name
Host Name
Set the host name of the wireless board.
To use the same name as the SSID, select the “Same as WLAN Network name” checkbox.
This checkbox should normally be selected. If not selected, the wireless board will only
operate properly in the DNS environment that corresponds to the set host name.
Domain Name
Set the domain name of the wireless board.
IP Setup Obtain an IP address automatically
If the network has a DHCP server, set the IP address, subnet mask, default gateway, and
DNS Server automatically.
Use the following IP address
Set the IP address, subnet mask, default gateway, and DNS Server manually.
DHCP Server
Setup
Auto
Use the DHCP server function of the wireless board.
Start IP / End IP:
Specify the range of IP addresses assigned to clients by the wireless board’s DHCP
server.
Subnet Mask / Default Gateway / DNS Server:
Specify the addresses that the wireless board’s DHCP server sets in the client.
Disable
Do not use the DHCP server function of the wireless board.
GateKeeper You can limit access to the wired LAN from computers connected to the wireless board by
wireless LAN.
All Pass: Allow all access to the wired LAN.
All Blocked: Block all access to the wired LAN.
Internet Only: Only allow access by web browser.
30
E
WLAN Setup Wireless LAN Set whether the wireless LAN function is used.
Mode Access Point: Use the wireless board as an access point.
Station: Use the wireless board as a client.
AP and Station: Use the wireless board as both an access point and a client.
Access Point Set this when the “Mode” is “Access Point” or “AP and Station”.
SSID
Set the SSID of the wireless board.
SSID Broadcast
Set whether SSID broadcast is used.
Band
Set the frequency bands used for wireless LAN.
* 2.4 GHz and 5 GHz cannot be used simultaneously.
* When 5 GHz is selected, 2.4 GHz devices will not be able to connect.
802.11mode
Change the communication frequency bands and the communication speed.
Channel
Set the channels that are used for wireless LAN.
Encryption
Set the encryption method for wireless LAN encryption.
Key
Set a key that is appropriate for the wireless LAN encryption method.
Channel Bandwidth
Set the channel bandwidth.
Station Set this when the “Mode” is “Station” or “AP and Station”.
Connect to Existing AP
Enter the SSID of the wireless LAN access point.
Encryption
Set the encryption method for wireless LAN access point.
Key
Set the encryption key that is appropriate for the wireless LAN access point.
31 E
SNMP Setup SNMP V3 Enable / Disable
Set whether SNMP is enabled or disabled.
Username
Set the user name for SNMP.
Auth Password (MD5) / Priv Password (DES)
Set each password.
Trap Destination
Set the trap destination.
OSD Setup Display
Option
Device Information / User-List (touch-applicable models only) / Connect info
Set whether each type of information is shown in the screen.
Font color / Font Size
Set the color and size of the screen font.
Screen Saver Settings (touch-applicable models only)
Set whether a screen saver is used.
If used, set the time until the screen saver activates.
Projection
Option
OSD Menu Button (touch-applicable models only)
Set whether the toolbar is displayed.
WebSlides
Setup
Auto Refresh
Interval
(second)
Set the refresh interval for the screen displayed in the web browser.
Access
Password
Control
Set the password for display of the screen in a web browser.
Disable: Do not use a password.
Use the same password as ”Code”: Use the same password as the passcode.
Use the following Code: Use the entered number as the password.
Change
Passwords
Conference
Control
Change the password for Conference Control.
Admin Change the password for Admin.
Reset to Default Return the wireless board settings to their factory default state.
Firmware
Upgrade
System
Conguration
Export: You can save the settings.
Import: You can retrieve saved settings.
Firmware
Upgrade
Update the rmware of the wireless board.
You can download the latest version of the rmware using the Information Display Downloader
on the CD-ROM.
Reboot System Restart the wireless board.
32
E
You can enable starting of the connection software from a commercially available USB ash drive.
USB ash drives that can be used:
• USB ash drives indicated operation manual with a capacity of 128 MB or more.
• Use a USB ash drive in which nothing is saved.
1. Insert the USB ash drive into the USB port of the wireless board.
Touch-applicable models:
2. Touch “Setup” ( ) in the home screen of Wireless mode.
3. Touch “Create Token”.
Creating starts.
4. When the making completed message appears, remove the USB ash drive.
Other than touch-applicable models:
2. Press INFORMATION button three times on the remote control unit in OPTION input mode to display the
INFORMATION3 screen.
3. Press ENTER button to display CREATE TOKEN screen.
4. Press or to select the OK, and press ENTER button.
Creating starts.
5. When the creating completed message appears, remove the USB ash drive.
Caution
• Do not remove the USB ash drive while making is in progress.
And do not turn off the power of the monitor.
• Always create this on the wireless board.
Incorrect operation will result if you copy the le from the wireless token to the USB ash drive using your computer.
TIPS
• When the USB ash drive connection software is started, the software will automatically connect to the wireless board on
which the wireless token was created. (The software will also connect automatically over wireless LAN.)
Starting from a commercially available
USB ash drive
33
Uninstalling the connection software
E
n Windows
Caution
• This can only be done by a user with administrator authority.
1. Exit all running software applications.
2. Select “Control Panel” from the “Start” menu.
3. Click “Uninstall a program”.
• If you are using icon view, click “Programs and Features”.
4. Select “MirrorOp for SHARP” and click “Uninstall”.
• Follow the on-screen instructions.
• When the “User Account Control” screen appears, click “Yes” (or “Allow”).
This completes the uninstallation.
n Mac
Caution
• To uninstall, an administrator name (user name) and password are required.
1. Exit all running software applications.
2. Move “SHMirrorOp_Mac.app” from the “Applications” folder to the recycle bin.
This completes the uninstallation.
34
E
Using as a whiteboard (Direct Drawing)
(touch-applicable models only)
You can show a white background and use the monitor as a whiteboard.
TIPS
• The function buttons on the touch pen cannot be used. Multiple touch pens cannot be used at the same time.
1. Turn on the monitor power.
2. Touch the whiteboard button on the home screen of the wireless board. (See page 15.)
The whiteboard screen appears.
Toolbar
Touch “Toolbar” ( ) to display the toolbar.
12345 6
1. Pen
Draw a line on the screen.
Touch while “Pen” is selected to change the thickness or color.
2. Eraser
Touch on handwritten data to erase the data.
Touch while “Eraser” is selected to change the size of the eraser.
3. Erase all
Erase all handwritten data.
4. Save
Save the currently displayed screen as an image le (JPEG).
5. Open
Display a saved image.
This appears when a USB ash drive is connected.
6. Back *
Return to the home screen of wireless mode.
* This icon will be added when the wireless board rmware is updated. (See page 31)
Caution
• When the power is turned off, handwritten data is lost. Always save any handwritten data you need before turning off the
power.
35 E
n Saving the screen in whiteboard as an image
The handwritten data in Direct Drawing mode can be saved as an image le (JPEG) in a commercially available USB ash drive
connected to the wireless board.
1. Connect the USB ash drive to the wireless board.
2. Touch “Save” ( ) on the toolbar.
The le is saved with the le name “B0000001.jpg” in the “Annotation” folder of the USB ash drive.
(The number in the le name is successively incremented up to 9999999, after which it returns to 0000001.)
Caution
• Set the correct date and time in the monitor.
The monitor date and time is used for the le time stamp. Files will not be given a time stamp if the monitor does not have a
date and time setting.
n Displaying a saved image
Caution
• If data already exists in Direct Drawing mode, the original data will be lost when the new image is displayed.
1. Connect the USB ash drive to the wireless board. (See the description above.)
2. Touch “Open” ( ) on the toolbar.
3. Touch the image to be displayed.
36
n Information on the software license for
this product
Software composition
The software included in this product is comprised of various
software components whose individual copyrights are held by
SHARP or by third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various
relevant documents included with this product that were
developed or written by SHARP are owned by SHARP and
are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of
freely distributed software and software components whose
copyrights are held by third parties. These include software
components covered by a GNU General Public License
(hereafter GPL), a GNU Lesser General Public License
(hereafter LGPL) or other license agreement.
Obtaining source code
Some of the open source software licensors require the
distributor to provide the source code with the executable
software components. GPL and LGPL include similar
requirements. For information on obtaining the source code for
the open source software and for obtaining the GPL, LGPL,
and other license agreement information, visit the following
website:
http://www.sharp.co.jp/business/lcd-display/support/download/
source_e.html
We are unable to answer any questions about the source
code for the open source software. The source code for the
software components whose copyrights are held by SHARP is
not distributed.
Acknowledgements
The following open source software components are included
in this product:
busybox, lighttpd, bridge, glibc, wireless_tools, iptables,
Qt, Net-SNMP, Openssl, Dbus, nmbd, Mini-XML, udhcp,
Linux Kernel , MediaInfo, libintl, libiconv, libcurl, zlib, USB/IP,
SNMP++, soundower, Noto Fonts, u-boot
n Software copyrights
Requirement to display license
The copyrights of some software components incorporated in the monitor
require that the license be displayed. The licenses of these software
components are shown below.
BSD Licence
This product includes software developed by the University of California,
Berkeley and its contributors.
OpenSSL Licence
This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit.
(http://www.openssl.org/)
OpenSSL LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the
OpenSSL License and the original SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style
Open Source licenses. In case of any license issues related to OpenSSL
please contact openssl-core@openssl.org.
OpenSSL License
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit. (http://www.openssl.org/)”
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to
endorse or promote products derived from this software without prior written
permission. For written permission, please contact
openssl-core@openssl.org.
5. Products derived from this software may not be called “OpenSSL” nor may
“OpenSSL” appear in their names without prior written permission of the
OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following
acknowledgment:
“This product includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS”
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@
cryptsoft.com). This product includes software written by Tim Hudson (tjh@
cryptsoft.com).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.
com).
The implementation was written so as to conform with Netscapes SSL.
Intellectual Property Rights and Other Matters
E
37
This library is free for commercial and non-commercial use as long as the
following conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the
SSL code. The SSL documentation included with this distribution is covered by
the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.
com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code
are not to be removed.
If this package is used in a product, Eric Young should be given attribution as
the author of the parts of the library used.
This can be in the form of a textual message at program startup or in
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@
cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being
used are not cryptographic related :-).
4. If you include any Windows specic code (or a derivative thereof) from the
apps directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under another
distribution licence [including the GNU Public Licence.]
cURL
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996-2009, Daniel Stenberg,
<daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose
with or without fee is hereby granted, provided that the above copyright notice
and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be
used in advertising or otherwise to promote the sale, use or other dealings in
this Software without prior written authorization of the copyright holder.
UPnP
Portions Copyright (C) 2004 Intel Corporation
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and
change it. By contrast, the GNU General Public License is intended to guarantee
your freedom to share and change free software--to make sure the software is free
for all its users. This General Public License applies to most of the Free Software
Foundation’s software and to any other program whose authors commit to using
it. (Some other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for
a fee, you must give the recipients all the rights that you have. You must make
sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author’s protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software. If the
software is modied by someone else and passed on, we want its recipients to
know that what they have is not the original, so that any problems introduced by
others will not reect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish
to avoid the danger that redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or
not licensed at all.
The precise terms and conditions for copying, distribution and modication
follow.
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. The “Program”, below, refers to any such
program or work, and a “work based on the Program means either the
Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either verbatim
or with modications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modication”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution and modication are not covered
by this License; they are outside its scope. The act of running the Program is
not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by
running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code
as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License
and to the absence of any warranty;
and give any other recipients of the Program a copy of this License along
with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it,
thus forming a work based on the Program, and copy and distribute such
modications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
a) You must cause the modied les to carry prominent notices stating that
you changed the les and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or
in part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of
this License.
E
38
c) If the modied program normally reads commands interactively when
run, you must cause it, when started running for such interactive use in
the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a
copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modied work as a whole. If identiable
sections of that work are not derived from the Program, and can be reasonably
considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with
the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under
Section 2) in object code or executable form under the terms of Sections 1
and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source
code, which must be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to
give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy of the
corresponding source code, to be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange;
or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in object
code or executable form with such an offer, in accord with Subsection b
above.)
The source code for a work means the preferred form of the work for making
modications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface
denition les, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need
not include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the
executable.
If distribution of executable or object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the source
code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute the Program except
as expressly provided under this License. Any attempt otherwise to copy,
modify, sublicense or distribute the Program is void, and will automatically
terminate your rights under this License.
However, parties who have received copies, or rights, from you under this
License will not have their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to
copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the
rights granted herein.
You are not responsible for enforcing compliance by third parties to this
License.
7. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as
a consequence you may not distribute the Program at all. For example, if a
patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be to refrain entirely
from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as
a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or
other property right claims or to contest validity of any such claims; this section
has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through
that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Program species
a version number of this License which applies to it and “any later version”, you
have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Program
does not specify a version number of this License, you may choose any version
ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask
for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED
BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN
IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible
use to the public, the best way to achieve this is to make it free software which
everyone can redistribute and change under these terms.
E
39
To do so, attach the following notices to the program. It is safest to attach
them to the start of each source le to most effectively convey the exclusion of
warranty; and each le should have at least the “copyright” line and a pointer to
where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts
in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision
comes with ABSOLUTELY NO WARRANTY; for details type ‛show w’.
This is free software, and you are welcome to redistribute it under certain
conditions; type ‛show c’ for details.
The hypothetical commands ‛show w’ and ‛show c’ should show the appropriate
parts of the General Public License. Of course, the commands you use may be
called something other than ‛show w’ and ‛show c’; they could even be mouse-
clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here
is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
‛Gnomovision’ (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider
it more useful to permit linking proprietary applications with the library. If this is
what you want to do, use the GNU Lesser General Public License instead of
this License.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
[This is the rst released version of the Lesser GPL. It also counts as the
successor of the GNU Library Public License, version 2, hence the version
number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public Licenses are intended to
guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially
designated software packages--typically libraries--of the Free Software
Foundation and other authors who decide to use it. You can use it too, but
we suggest you rst think carefully about whether this license or the ordinary
General Public License is the better strategy to use in any particular case,
based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price.
Our General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if you
wish); that you receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs; and that you are
informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to
deny you these rights or to ask you to surrender these rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the library
or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee,
you must give the recipients all the rights that we gave you. You must make sure
that they, too, receive or can get the source code. If you link other code with the
library, you must provide complete object les to the recipients, so that they can
relink them with the library after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and
(2) we offer you this license, which gives you legal permission to copy, distribute
and/or modify the library.
To protect each distributor, we want to make it very clear that there is no
warranty for the free library. Also, if the library is modied by someone else and
passed on, the recipients should know that what they have is not the original
version, so that the original author’s reputation will not be affected by problems
that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free
program. We wish to make sure that a company cannot effectively restrict the
users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library
must be consistent with the full freedom of use specied in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU
General Public License. This license, the GNU Lesser General Public License,
applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to
permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library,
the combination of the two is legally speaking a combined work, a derivative of the
original library. The ordinary General Public License therefore permits such linking
only if the entire combination ts its criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less
to protect the user’s freedom than the ordinary General Public License. It also
provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary
General Public License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the
widest possible use of a certain library, so that it becomes a de-facto standard.
To achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free
libraries. In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs
enables a greater number of people to use a large body of free software. For
example, permission to use the GNU C Library in non-free programs enables
many more people to use the whole GNU operating system, as well as its
variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’
freedom, it does ensure that the user of a program that is linked with the Library
has the freedom and the wherewithal to run that program using a modied
version of the Library.
The precise terms and conditions for copying, distribution and modication follow.
Pay close attention to the difference between a “work based on the library” and
a “work that uses the library”. The former contains code derived from the library,
whereas the latter must be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program
which contains a notice placed by the copyright holder or other authorized
party saying it may be distributed under the terms of this Lesser General
Public License (also called “this License”).
Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as
to be conveniently linked with application programs (which use some of those
functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has
been distributed under these terms. A “work based on the Library” means either
the Library or any derivative work under copyright law: that is to say, a work
containing the Library or a portion of it, either verbatim or with modications and/
or translated straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term “modication”.)
“Source code” for a work means the preferred form of the work for making
modications to it. For a library, complete source code means all the source
code for all modules it contains, plus any associated interface denition les,
plus the scripts used to control compilation and installation of the library.
E
40
Activities other than copying, distribution and modication are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted,
and output from such a program is covered only if its contents constitute a work based on
the Library (independent of the use of the Library in a tool for writing it). Whether that is
true depends on what the Library does and what the program that uses the Library does.
1.
You may copy and distribute verbatim copies of the Library’s complete source
code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that refer to this License and to the absence
of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2.
You may modify your copy or copies of the Library or any portion of it, thus forming a
work based on the Library, and copy and distribute such modications or work under
the terms of Section 1 above, provided that you also meet all of these conditions:
a) The modied work must itself be a software library.
b) You must cause the les modied to carry prominent notices stating that
you changed the les and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all
third parties under the terms of this License.
d) If a facility in the modied Library refers to a function or a table of data
to be supplied by an application program that uses the facility, other
than as an argument passed when the facility is invoked, then you must
make a good faith effort to ensure that, in the event an application does
not supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose
that is entirely well-dened independent of the application. Therefore,
Subsection 2d requires that any application-supplied function or table used by
this function must be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modied work as a whole. If identiable
sections of that work are not derived from the Library, and can be reasonably
considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole
which is a work based on the Library, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with
the Library (or with a work based on the Library) on a volume of a storage
or distribution medium does not bring the other work under the scope of this
License.
3. You may opt to apply the terms of the ordinary GNU General Public License
instead of this License to a given copy of the Library. To do this, you must
alter all the notices that refer to this License, so that they refer to the ordinary
GNU General Public License, version 2, instead of to this License. (If a
newer version than version 2 of the ordinary GNU General Public License
has appeared, then you can specify that version instead if you wish.) Do not
make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the
ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a
program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you accompany it with the complete
corresponding machine-readable source code, which must be distributed
under the terms of Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from
the same place satises the requirement to distribute the source code, even
though third parties are not compelled to copy the source along with the object
code.
5.
A program that contains no derivative of any portion of the Library, but is designed
to work with the Library by being compiled or linked with it, is called a “work that
uses the Library”. Such a work, in isolation, is not a derivative work of the Library,
and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an
executable that is a derivative of the Library (because it contains portions
of the Library), rather than a “work that uses the library”. The executable is
therefore covered by this License. Section 6 states terms for distribution of such
executables.
When a “work that uses the Library” uses material from a header le that is part of
the Library, the object code for the work may be a derivative work of the Library even
though the source code is not. Whether this is true is especially signicant if the work
can be linked without the Library, or if the work is itself a library. The threshold for this
to be true is not precisely dened by law.
If such an object le uses only numerical parameters, data structure layouts
and accessors, and small macros and small inline functions (ten lines or less in
length), then the use of the object le is unrestricted, regardless of whether it is
legally a derivative work. (Executables containing this object code plus portions of
the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object
code for the work under the terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also combine or link a “work
that uses the Library” with the Library to produce a work containing portions
of the Library, and distribute that work under terms of your choice, provided
that the terms permit modication of the work for the customer’s own use
and reverse engineering for debugging such modications.
You must give prominent notice with each copy of the work that the Library is
used in it and that the Library and its use are covered by this License. You must
supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as
well as a reference directing the user to the copy of this License. Also, you must
do one of these things:
a)
Accompany the work with the complete corresponding machine-readable
source code for the Library including whatever changes were used in the
work (which must be distributed under Sections 1 and 2 above); and, if the
work is an executable linked with the Library, with the complete machine-
readable “work that uses the Library”, as object code and/or source code,
so that the user can modify the Library and then relink to produce a
modied executable containing the modied Library. (It is understood that
the user who changes the contents of denitions les in the Library will
not necessarily be able to recompile the application to use the modied
denitions.)
b) Use a suitable shared library mechanism for linking with the Library. A
suitable mechanism is one that (1) uses at run time a copy of the library
already present on the user’s computer system, rather than copying
library functions into the executable, and (2) will operate properly with
a modied version of the library, if the user installs one, as long as the
modied version is interface-compatible with the version that the work
was made with.
c) Accompany the work with a written offer, valid for at least three years, to
give the same user the materials specied in Subsection 6a, above, for a
charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a
designated place, offer equivalent access to copy the above specied
materials from the same place.
e) Verify that the user has already received a copy of these materials or that
you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must
include any data and utility programs needed for reproducing the executable
from it. However, as a special exception, the materials to be distributed need not
include anything that is normally distributed (in either source or binary form) with
the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the
executable.
It may happen that this requirement contradicts the license restrictions of other
proprietary libraries that do not normally accompany the operating system. Such
a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
E
41
7. You may place library facilities that are a work based on the Library side-by-
side in a single library together with other library facilities not covered by this
License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities
is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities. This must be
distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part
of it is a work based on the Library, and explaining where to nd the
accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library
except as expressly provided under this License. Any attempt otherwise to
copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Library or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Library (or
any work based on the Library), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10.
Each time you redistribute the Library (or any work based on the Library),
the recipient automatically receives a license from the original licensor to
copy, distribute, link with or modify the Library subject to these terms and
conditions. You may not impose any further restrictions on the recipients’
exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with this
License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute so
as to satisfy simultaneously your obligations under this License and any
other pertinent obligations, then as a consequence you may not distribute
the Library at all. For example, if a patent license would not permit royalty-
free redistribution of the Library by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply, and the section as
a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system which
is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/donor to decide if he or
she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions
of the Lesser General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Library species a
version number of this License which applies to it and “any later version”, you
have the option of following the terms and conditions either of that version or
of any later version published by the Free Software Foundation. If the Library
does not specify a license version number, you may choose any version ever
published by the Free Software Foundation.
14.
If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to
ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS
NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS
IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED
TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER
PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA
BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to
the public, we recommend making it free software that everyone can redistribute
and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest
to attach them to the start of each source le to most effectively convey the
exclusion of warranty; and each le should have at least the “copyright” line and
a pointer to where the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms
of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.
You should have received a copy of the GNU Lesser General Public License
along with this library; if not, write to the Free Software Foundation, Inc., 51
Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is
a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‛Frob’
(a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
lighttpd
Copyright (c) 2004, Jan Kneschke, incremental
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
E
42
- Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
- Neither the name of the ‛incremental’ nor the names of its contributors may
be used to endorse or promote products derived from this software without
specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Net-SNMP
Various copyrights apply to this package, listed in various separate parts below.
Please make sure that you read all the parts.
---- Part 1: CMU/UCD copyright notice: (BSD like) -----
Copyright 1989, 1991, 1992 by Carnegie Mellon University
Derivative Work - 1996, 1998-2000
Copyright 1996, 1998-2000 The Regents of the University of California
All Rights Reserved
Permission to use, copy, modify and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided that
the above copyright notice appears in all copies and that both that copyright
notice and this permission notice appear in supporting documentation, and that
the name of CMU and The Regents of the University of California not be used in
advertising or publicity pertaining to distribution of the software without specic
written permission.
CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM
ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT
SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE
LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES
OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE,
DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) -----
Copyright (c) 2001-2003, Networks Associates Technology, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
* Neither the name of the Networks Associates Technology, Inc nor the names of
its contributors may be used to endorse or promote products derived from this
software without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) -----
Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd.
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
* The name of Cambridge Broadband Ltd. may not be used to endorse or
promote products derived from this software without specic prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) -----
Copyright (c) 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
California 95054, U.S.A. All rights reserved.
Use is subject to license terms below.
This distribution may include materials developed by third parties.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* Neither the name of the Sun Microsystems, Inc. nor the names of its
contributors may be used to endorse or promote products derived from this
software without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
---- Part 5: Sparta, Inc copyright notice (BSD) -----
Copyright (c) 2003-2012, Sparta, Inc
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
E
43
* Neither the name of Sparta, Inc nor the names of its contributors may be used
to endorse or promote products derived from this software without specic
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) -----
Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing
University of Posts and Telecommunications.
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* Neither the name of Cisco, Inc, Beijing University of Posts and
Telecommunications, nor the names of their contributors may be used to
endorse or promote products derived from this software without specic prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) -----
Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com
Author: Bernhard Penz <bernhard.penz@fabasoft.com>
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* The name of Fabasoft R&D Software GmbH & Co KG or any of its
subsidiaries, brand or product names may not be used to endorse or promote
products derived from this software without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
---- Part 8: Apple Inc. copyright notice (BSD) -----
Copyright (c) 2007 Apple Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/
or other materials provided with the distribution.
3. Neither the name of Apple Inc. (“Apple”) nor the names of its contributors
may be used to endorse or promote products derived from this software
without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY APPLE AND ITS CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
---- Part 9: ScienceLogic, LLC copyright notice (BSD) -----
Copyright (c) 2009, ScienceLogic, LLC
All rights reserved.
Redistribution and use in source and binary forms, with or without modication,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* Neither the name of ScienceLogic, LLC nor the names of its contributors may
be used to endorse or promote products derived from this software without
specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
SNMP++
Copyright (c) 2001-2007 Jochen Katz, Frank Fock
This software is based on SNMP++2.6 from Hewlett Packard:
Copyright (c) 1996
Hewlett-Packard Company
ATTENTION: USE OF THIS SOFTWARE IS SUBJECT TO THE FOLLOWING
TERMS.
Permission to use, copy, modify, distribute and/or sell this software and/or its
documentation is hereby granted without fee. User agrees to display the above
copyright notice and this license notice in all copies of the software and any
documentation of the software. User agrees to assume all liability for the use of
the software; Hewlett-Packard and Jochen Katz make no representations about
the suitability of this software for any purpose. It is provided “AS-IS” without
warranty of any kind, either express or implied. User hereby grants a royalty-
free license to any and all derivatives based upon this software code base.
E
44
Apache License
Copyright [2016] [Sharp Corporation]
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this le except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed
under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES
OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specic language governing permissions and limitations
under the License.
SIL Open Font License
“Noto Sans CJK JP Reqular” and “Noto Sans CJK JP Bold”
licensed under the SIL Open Font License http://www.google.com/get/noto/#/
E
PN-ZB03W G EN17D(2)