Vaddio 535-2000-232 User Manual
Displayed below is the user manual for 535-2000-232 by Vaddio which is a product in the Security Camera Accessories category. This manual has pages.
Related Manuals
©2006 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 800-572-2011,
Main: 763- 971-4400, FAX: 7 63-971-4464. Document Number 341-931 RevA.
Installation and User Guide
Vaddio™ Thin Profile Wall Mount for Sony® EVI-HD7V or EVI-HD3V
Pan/Tilt/Zoom Camera (camera not included)
Part Number: 535-2000-232
UNPACKING:
Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) Thin Profile Mount for Sony EVI -HD7V or EVI-HD3VCamera (camera not included)
One (1) ¼”-20 x 3/8” Mounting Screw
Four (4) #8 x 1.25” Sheet Metal Screws
Four (4) Wall Anchors, Self Drilling
MOUNTING THE CAMERA:
The Thin Profile Wall Mount for the Sony EVI-HD7V and EVI-HD3V Cameras can be mounted to a 2-gang wall electrical wall box or be
mounted directly to a drywall surface with the supplied wall anchors or other spiral type wall anchors of the Integrator’s choice. The slotted
mounting holes are 90º opposed from top to bottom to ensure that the camera can be adjusted and mounted level. Note: When loc ating the
camera, consider viewing angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where the camera is
to be mounted. Pick a mounting location to optimize the performance of the camera within the given application.
INTENDED USE:
This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Sony EVI-HD7V
and EVI-HD3V cameras only. Using this mount for any other device could damage that device and/or create a potentially unsafe operating
condition. This mount was not intended for use with set-top codecs.
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of
Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material
Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement
supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the
Vaddio website or through e-mail support at mailto:support@vaddio.com.
Mounts to a 2-gang electrical
box or directly to drywall with
wall anchors
Thin Profile Wall Mount
Heavy duty 12-gauge metal
construction
¼”-20 mounting
screw attaches
camera to mount
90º Opposed slotted
mounting holes for
easy camera leveling
Camera and Electronic Products for Integrators
Rounded corners for
safety and ease of
handling
Durable black powder
coat finish (paintable
to match any décor)