Vaddio 535-2000-234 User Manual
Displayed below is the user manual for 535-2000-234 by Vaddio which is a product in the Security Camera Accessories category. This manual has pages.
Related Manuals
©2007 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Vaddio, 4800 Quebec Ave. N.,
Minneapo lis, MN 55428, Toll Free: 1-800-572-201 1, Main: 763-97 1-4400, FAX: 763-971-4464. Doc ument Number 341-570 Rev. A
Installation and User Guide
Vaddio™ Thin Profile Wall Mount for the LifeSize HD PTZ Camera
Model Number 535-2000-22 2
UNPACKING:
Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) Thin Profile Wall Mount for the LifeSize HD PTZ Camera
(Camera not included)
One (1) ¼”-20 x ½” Camera Mounting Screw
Four (4) #6 x 1” Sheet Metal Screws
Four (4) Conical Wall Anchors
Documentation
MOUNTING THE CAMERA:
The Thin Profile Wall Mo unt for the LifeSiz e HD Cam era ca n be mou nted t o a 2-gang wall bo x or mount ed directl y to a dr ywall
surface with the supplied wall anchors or ot her spiral type wall anchors of the integrator’s choice. The slotted mounting hole s
are 90º opposed from top to bottom to ensure that the camera can be adj usted and mounted level. Note: When locating the
camera, consider viewing angl es, lighting con ditions, possibl e line of site ob structions and check for i n- wall obstructions where
the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.
INTENDED USE:
This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the
LifeSize HD Camera only. Using this m ount for any other device could damage that de vice and/or create a potentially unsafe
operating condition.
HARDWARE WARRANTY:
Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The
Statement of Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service,
Technical Support, Return Material Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under
Warranty. The Vaddio Warranty Statement supercedes all other published warranty statements in content and coverages.
Vaddio Technical Support can be contacted through the Vaddio website or through e-mail support at
mailto:support@vaddio.com.
¼”-20 mounting screw to secure camera to
the mount (not all mounts or cameras have
this slot for a ¼”-20 screw). Note: The
integrator is responsible for attaching the
camera to the mount securely.
90º Opposed slotted
mounting holes for easy
camera leveling
Camera and Electronic Products for Integrators
Rounded corners for
safety and ease of
handling
Durable black powder
coat finish (paintable to
match any décor)
Figure 1:
General Installation Diagram Thin Profile Wall Mount can
be mounted directly to the
wall with wall anchors or
can be mounted directly to
a 2-gang electrical wall box.
Figure 2:
Thin Profile Wall
Mount for LifeSize
PTZ Camera