Whirlpool AWZ 9HPS/PRO User Manual
Displayed below is the user manual for AWZ 9HPS/PRO by Whirlpool which is a product in the Tumble Dryers category. This manual has pages.
Related Manuals
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.whirlpool.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
system. For some hours, after the end of drying, the drum rotates at
regular intervals to prevent the formation of creases.
In case of power failure, it is necessary to press the button Start/
Pause to restart the cycle.
Ecomonitor
This indicator shows the energy consumption level according to
the programme and the options set. The consumption is
proportional to the lines on the display,by the ecomonitor icon.
Drum light (If present)
Some models are equipped with drum internal light to make use of the
dryer easier. No setting is required. For instance, the light goes on when
opening the door.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having closed
it, press the button Start/Pause again to restart the dryer.
SETTINGS
The various settings can be selected with the modes described in
"Navigation".
Language shows the languages available on display.
Keys Tone allows adjusting or removing the setting sounds of the
machine keys.
Cycle End Alert allows adjusting or removing the cycle end sounds
of the machine.
Display Contrast allows adjusting the display brightness
Remember last used cycle selects the last used cycle automatically
when starting the machine, otherwise it restarts from the default
programme.
Eco Mode allows adjusting the machine switching o after the cycle
end.
Factory Settings allows resetting the factory settings.
FIRST TIME USE
When starting the appliance for the rst time, the control panel
will show the set language menu automatically. Turn the knob
to visualize the languages available in the machine. Press the
knob to conrm the selected languages.
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is xed correctly,
either to the dryer’s water tank, or to your domestic sewage
system.
The dryer must be installed in a room with a temperature
ranging between 5°C and 35°C to ensure proper operation.
Before you use your dryer ensure that it has been in a upright
position for at least 6 hours.
NAVIGAZIONE FUNCTIONS SELECTION
The navigation can be made when the LED of the required
function is on. Browse the function by rotating the knob to
visualise the possible selections on the display.
Press the knob to conrm.
The machine proposes a path for selecting programmes and
options, with starting in sequence of the functions LEDs.
However, the programmes and options can be selected
autonomously by simply pressing the programmes button or
the required option.
DAILY USE
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your lters after each drying cycle. (Refer
to section Care & Maintanence).
1. Open the door and load garments. Always refer to instructions
on clothing labels and the max loads indicated in the programme
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door lter.
2. Close the door.
3. Press the button On/O.
4. Select the required programme according to the type of laundry.
The LED of the button P must remain on. Rotate the knob to
select the required value and then press the knob to conrm.
5. Select the options, if necessary. If the options have any
submenus, they can be browsed by rotating the knob and
then conrmed by pressing the knob.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. The display
signals the end of the cycle. Pulling out the load immediately
helps to prevent the formation of creases on laundry.
8. Turn the machine o by pressing the button On/O, open the
door and pull clothing out. If the machine is not switched o
manually, after about a quarter of an hour from the cycle end, the
appliance turns o automatically to save energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease Care
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the rst time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
*MAX LOAD 9 Kg (Dry load)
CONTROL PANEL
Refer to Troubleshooting section.
COTTON 2:20
COTTON 2:20
1. 10.2. 11.8. 13.7. 129. 4.
5.
1 ON/OFF button (Reset if long pressed)
2 Programme button
3 Programme selection Knob (rotate to
select / press to conrm)
4 Start/Pause button
5 Programmes area
6 Display
Options Buttons
7 Settings
8 Fresh Care+
9 Keys Locked
10 Start Delay
11 Drying Time
12 Drying Level
13 Cycle Options
6.
3.
OPTIONS BUTTONS
These buttons serves to personalise the selected programme
according to personal requirements. Not all options are available
for all programmes. Some options are incompatible with the
ones previously set. The buzzer and/or blinking indicators
will signal the incompatibility. If the option is available, the
option indicator will stay on. Some options may be kept in the
memory of the programme if selected in the previous drying.
Some options may be kept in the memory of the programme if
selected in the previous drying of the same programme.
P PROGRAMS
Eco Cotton kg Max*
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most ecient programme in terms of energy
consumption for drying cotton laundry. The values on the Energy
Label are based on this programme.
Cotton kg Max*
For drying cotton laundry.
Mixed kg 4
This programme is ideal for drying cotton and synthetic
fabrics together.
Synthetics kg 4
For drying laundry made of synthetic bres.
Delicates kg 2
For drying delicate laundry which needs gentle treatment.
Wool kg 1
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally the
heaviest edges that are still damp.
Big Items kg Max*
This programme is intended for drying cotton sheets.
Rapid 30' kg 0,5
Ideal for drying cotton garments spun at high speed in the
washing machine.
Shirts kg 3
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Easy Ironing
This cycle allows to extend the bres of garments thus
making ironing and folding easier. Do not use in case of
garments that are still wet. Suitable for small loads of cotton
textiles or cotton blends.
Refresh
A short programme suitable for refreshing bres and
garments by means of fresh air. Do not use with garments that are
still wet. It can be used on with any load size but is more eective
with small loads. The cycle duration is about 20 minutes.
Specials
To set one of the following programmes, use the knob for
selecting and conrming the position of the "Special Programs".
The programmes list is accessed by rotating the knob. The
display shows the names of the available programmes. Conrm
the required programme by pressing the knob.
• Jeans kg 3
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
• Miniload kg 1
Economic drying of small laundry loads.
• Sport kg 4
For drying sports garments made of synthetics or cotton.
• Silk kg 0,5
Gentle drying of silk garments.
• Coloured kg Max*
Programme for gentle drying suitable for coloured garments.
• Downjackets kg 2,5
To dry down jackets, giving their natural softness back (2
jackets).
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Drying Level
Each programme has a pre-set drying level. In some
programmes, the residual moisture on garments can be set.
Pressing the related option button, the LED goes on. Turn the
knob to browse among the levels available for each programme.
Press the knob to conrm.
Iron Dry: a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.
Hanger Dry: a level intended for delicate garments ready to
be hanged.
Cupboard Dry: the garments are ready to be folded and put
away
Extra Dry: used for garments to be worn at the end of the
cycle.
Drying Time
In some programmes, the drying time can be set. Pressing
the related option button, the LED goes on. Turn the knob to
visualize the times available for each programme. Press the knob
to conrm.
h
Start Delay
Pressing the related option button, the LED goes on. Turn the
knob to browse among the times available for each programme.
Press the knob to conrm.
In case of door opening, after closing, it is necessary to press the
button Start/Pause again.
Fresh Care+
If garments are left inside the drum after the end of the
cycle, they are subject to bacterial proliferation. This option allows
to prevent this proliferation by controlling the temperature and
the rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease treatment
(a periodic rotation of the drum) is added in the Start Delay phase.
Keys Locked
This option makes all machine controls inaccesible, except
the button On/O.
When the machine is on:
• to activate the option, keep the button pressed until the
indicator goes on.
• To disable the option, keep the button pressed until the
indicator goes o.
This option remains in memory if selected in the previous drying.
Cycle Options
This buttons serves to access a menu of available options (see
next options). After having pressed the button, turn the knob
to select the option and press it to conrm.
• Rapid
Enables quicker drying.
• Gentle
Enables a more gentle treatment of the laundry by reducing the
drying temperature.
The duration of these programs will depend on the size of
the load, types of textiles, the spin speed used in your washer
and any extra options selected. In machines equipped with
display, the duration of the cycles is shown on the control
panel. The remaining time is constantly checked and adjusted
during the drying cycle to show the best possible estimate.
The wool drying cycle of this machine
has been approved by The Woolmark
Company for the drying of wool gar-
ments labelled as “hand wash” provided
that the garments are dried according
to the instructions issued by the ma-
nufacturer of this machine. Follow the
garment care label for other laundry
instructions. . The Woolmark symbol is a Certi cation mark in
many countries.
M1762
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.indesit.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.
THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.indesit.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
• Cycle end signal
This option activates a prolonged buzzer at the end of the
cycle. Enable it if you are not sure to hear the normal sound at the
end of the cycle.
This option remains in memory, if selected in the previous drying.
Heat Pump System
The heat pump contains uorinated greenhouse gases,
contained in a hermetically sealed unit. This sealed unit contains
0.18 kg of the F gas R134a. GWP = 1430 (1 t C02).
Power consumption
o-mode (Po) - Watts 0.50
left-on mode (Pl) - Watts 1.00
Programs Kg kWh Minutes
Eco Cotton* 9 2.07 211
Eco Cotton 4.5 1.20 131
Synthetics 4 0.73 95
* This is the reference programme for the energy label and suitable
to dry normal wet cotton laundry. This is the most ecient
programme in terms of energy consumption for drying wet cotton
laundry. (Standard/Default starting conguration).
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
3. If the drain hose is connected to your sewage system, x the
drain hose on the rear of the dryer again (see Installation Guide).
AB
1
42
3
C
PRODUCT DESCRIPTION
1. Water tank
2. Air Intake
3. Bottom lter
4. Door lter
CARE AND MANTENANCE
Unplug the dryer during the cleaning and maintenance
procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer
without having inserted the container back in place.
Cleaning the door lter after each cycle (see Fig. B).
Pull the lter out and clean it by removing the lint from the
lter surface under running water or using a vacuum cleaner. For
optimal performance, dry up all the lters before inserting them
back in place. Do not use the dryer without having reinserted the
lter in place.
Remove the door lter as described below:
1. Open the door and pull upwards.
2. Open the lter and remove lint from all its parts. Replace it
correctly. Ensure it is completely inserted ush with the dryer seal.
Cleaning the bottom lter when the relevant indicator
turns on (see Fig. C).
Pull the lter out and remove the lint from its surface by washing
it under runing water or by using a vacuum cleaner.
However, it is advisable to clean this lter after each cycle to
optimise drying performance. Do not use the dryer without having
inserted the lter in place rst.
Remove the bottom lter as described below:
1. Open the lower door.
2. Take the handle and pull the lower lter out.
3. Open the rear side of the lter and remove the lint from the
inner surface of the mesh.
4. Clean the bottom lter chamber avoiding the direct contact
with the leaves.
5. Close the rear side of the lower lter and place it back by
checking it is perfectly integrated in place.
6. Lower the lter handle and close the bottom door.
7. Make sure the air intake is free.
The lters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case
of clogged lters, the air ow inside the dryer would be
seriously aected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website - docs.whirlpool.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
TROUBLESHOOTING
Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes
Malfunction
Possible cause
Solution
The tumble
dryer does not
turn on.
The plug is not inserted into the socket.
Insert the plug into the socket.
The plug is faulty. Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, as adapters or extensions
A power failure occurred. Await the reactivation of the power supply.
The tumble
dryer does not
start
The door is open.
Close the door.
A time delay for the cycle start was set. For machines equipped with this function: await the end of the delay
set or switch the machine o to reset it. Refer to the section Options.
The button Start/Pause was not pressed to start
the program.
Press the button Start/Pause.
The function Key Lock was enabled (in case of
machines equipped with this option).
Refer to the option section and, if the Key Lock is present, disable it.
Switching the machine o is not enough to disable this option.
The drying
times are very
long
An appropriate maintenance was not carried
out.
Refer to the section Care & Maintenance and perform the operations
described.
The programme, the time and/or the drying
level set are not suitable for the type and the
amount of load inserted into the dryer.
Refer to the section programmes and options to nd the programme
and the options most suitable for the type of load.
The garments are too wet. Carry out a washing cycle with higher spin speed to remove as much
water as possible.
The dryer may be overloaded.
Refer to the programme section to check the max. load for each
programme.
Room temperature.
The drying time may be longer if the room temperature falls outside the
14–30°C range.
The programme
did not end.
A power failure occurred might have occurred.
In case of power failure, it is necessary to press the button Start/Pause
to restart the cycle.
Lights on or ashing
Water tank The water tank is full. Emtpy the water tank. Refer to the section Care & Maintenance.
Door lter
and/or bottom
lter*
Failure of the air ow necessary for machine
operation.
Clean the door lter and the bottom one and check whether air
intake is free. Carrying out these operations improperly may cause
damages.
Bottom lter* The bottom lter requires cleaning. Clean the bottom lter. Refer to section Care & Maintanence.
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. The DEMO
indicator is on.
Disable the DEMO mode. The following actions must be carried out
in sequence, without breaks. Switch the machine on and then switch
it o again. Press the Start/Pause button until the buzzer is heard.
Switch the machine on again. The “DEMO” indicator ashes and then
turns o .
The presence
of wrench
symbol signals a
malfunction.
The machine sensors detected a failure.
Switch the dryer o and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits ashing on the display.
For instance: F3 and E2
*Note: some models are self-cleaning and not equipped with bottom lter. Please refer to the section Care & Maintenance.