Table of Contents
- Contents
- About This Guide
- Getting Started with Your System
- Managing the Directory
- Managing the Call History
- Operating Calls
- Managing Local Video Conference
- Using the Yealink VC Cloud Management Service Platform
- Dialing Yealink Cloud Accounts
- Scheduled Conference
- Meet Now
- Permanent Virtual Meeting Room
- Managing Yealink Cloud Video Conference
- Using the Yealink Meeting Server
- Dialing YMS Accounts
- Scheduled Conference
- Viewing Scheduled Conferences
- Joining a Scheduled Conference from a Conference Reminder
- Joining a Scheduled Conference from a Conference Invitation
- Joining a Scheduled Conference from a Conference Schedule
- Joining a Scheduled Conference from the Notification Center
- Dialing into a Scheduled YMS Conference
- Watching Live Broadcast
- Meet Now
- Permanent Virtual Meeting Room
- Managing Video Conference
- Using the Third-party Video Conference Platforms
- Using Basic Features
- Settings
- Accessories with Your System
- Supported Accessories
- Using the CPW90 Wireless Microphones
- Using the CPW90-BT Bluetooth Wireless Microphones
- Using the CPE90 Wired Expansion Microphones
- Using the WPP20 Wireless Presentation Pod
- Using the CPN10 PSTN Box
- Using the VCC22 Video Conferencing Camera
Yealink VC200 User Manual
Displayed below is the user manual for VC200 by Yealink which is a product in the Video Conferencing Cameras category. This manual has pages.
Related Manuals
| Contents | ii
Contents
About This Guide..................................................................................................... 6
Related Documentation.........................................................................................................................................6
In This Guide........................................................................................................................................................7
Getting Started with Your System..........................................................................8
VCR11 Remote Control....................................................................................................................................... 8
Hardware of VCR11 Remote Control......................................................................................................8
Entering Characters using the VCR11 Remote Control........................................................................ 10
CP960 Conference Phone...................................................................................................................................11
Hardware of CP960 Conference Phone................................................................................................. 12
Entering Characters using the CP960 Conference Phone......................................................................13
Powering On the System....................................................................................................................................15
Powering Off the System................................................................................................................................... 15
Running the Setup Wizard................................................................................................................................. 16
Putting the System to Sleep............................................................................................................................... 16
Waking the System............................................................................................................................................. 16
Screen and Icons.................................................................................................................................................16
Idle Screen.............................................................................................................................................. 16
Control Center/Notification Center........................................................................................................ 18
Icon Instructions......................................................................................................................................19
Managing the Directory......................................................................................... 23
Local Directory................................................................................................................................................... 23
Adding Local Contacts and Conference Contacts................................................................................. 23
Editing Contacts......................................................................................................................................24
Deleting Contacts....................................................................................................................................25
Cloud Directory.................................................................................................................................................. 25
Enterprise Directory............................................................................................................................................26
Searching for Directory...................................................................................................................................... 26
Searching for Directory using Remore Control..................................................................................... 26
Searching for Directory using CP960 Conference Phone......................................................................26
Managing the Call History.................................................................................... 26
Viewing History Records....................................................................................................................................27
Viewing History Records using Remote Control...................................................................................27
Viewing History Records using CP960 Conference Phone..................................................................27
Adding a History Record to Local Directory.................................................................................................... 27
Adding a History Record to Local Directory using Remote Control.................................................... 27
Adding a History Record to Local Directory using CP960 Conference Phone.....................................27
Deleting History Records................................................................................................................................... 28
Deleting a History Record using CP960 Conference Phone................................................................ 28
Deleting a History Record using Remote Control................................................................................. 28
Deleting All History Records using Remote Control............................................................................ 28
Operating Calls....................................................................................................... 28
| Contents | iii
Placing a Call......................................................................................................................................................29
Placing a Call by Entering a Number....................................................................................................29
Editing Numbers before Calling............................................................................................................ 29
Placing a Call from the Search Result...................................................................................................30
Placing a Call from the Directory..........................................................................................................30
Placing a Call from the Call History..................................................................................................... 31
Joining the Virtual Conference Room................................................................................................................31
Answering Calls..................................................................................................................................................32
Configuring Auto Answer...................................................................................................................... 32
Configuring Answering Multiple Calls Automatically.......................................................................... 32
Configuring Muting Automatically Answered Calls............................................................................. 33
Answering a Call Manually....................................................................................................................33
Turning off Local Camera..................................................................................................................................33
Turning off Local Camera using Remote Control................................................................................. 33
Turnning off Local Camrera using CP960 Conference Phone.............................................................. 33
Rejecting Incoming Calls................................................................................................................................... 33
Rejecting an Incoming Call Manually................................................................................................... 33
DND (Do Not Disturb)...........................................................................................................................34
Ending a Call...................................................................................................................................................... 35
Managing Local Video Conference.......................................................................35
Initiating a Local Video Conference.................................................................................................................. 35
Initiating a Conference by Dialing a Group.......................................................................................... 35
Initiating a Conference by Inviting Participants.................................................................................... 36
Removing Conference Participants.................................................................................................................... 37
Removing Conference Participants using Remote Control....................................................................37
Removing Conference Participants using CP960 Conference Phone.................................................... 37
Muting All Conference Participants...................................................................................................................37
Unmuting All Conference Participants.............................................................................................................. 37
Muting a Conference Participant........................................................................................................................37
Unmuting a Conference Participant................................................................................................................... 38
Ending the Conference....................................................................................................................................... 38
Ending the Conference using Remote Control...................................................................................... 38
Ending the Conference using CP960 Conference Phone.......................................................................38
Using the Yealink VC Cloud Management Service Platform.............................38
Dialing Yealink Cloud Accounts........................................................................................................................39
Scheduled Conference........................................................................................................................................ 39
Viewing Scheduled Conferences............................................................................................................ 39
Joining a Scheduled Conference from a Conference Reminder............................................................ 40
Joining a Scheduled Conference from a Conference Schedule............................................................. 40
Joining a Scheduled Conference from the Notification Center............................................................. 40
Dialing into a Cloud Scheduled Conference........................................................................................ 40
Meet Now........................................................................................................................................................... 41
Initiating a Meet Now Conference.........................................................................................................41
Dialing into a Meet Now Conference....................................................................................................41
Permanent Virtual Meeting Room......................................................................................................................41
Joining a Permanent VMR from Yealink Cloud Directory....................................................................41
Dialing into a Permanent Virtual Meeting Room.................................................................................. 42
Managing Yealink Cloud Video Conference......................................................................................................42
Appointing Yourself to be a Lecturer.................................................................................................... 42
Applying for Speaking........................................................................................................................... 43
Processing the Application..................................................................................................................... 43
Inviting Conference Participants............................................................................................................ 43
| Contents | iv
Removing Conference Participants........................................................................................................ 44
Muting or Unmuting All Conference Participants................................................................................44
Muting or Unmuting a Conference Participant......................................................................................45
Leaving Conference................................................................................................................................45
Ending Conference..................................................................................................................................45
Using the Yealink Meeting Server....................................................................... 46
Dialing YMS Accounts...................................................................................................................................... 46
Scheduled Conference........................................................................................................................................ 46
Viewing Scheduled Conferences............................................................................................................ 47
Joining a Scheduled Conference from a Conference Reminder............................................................ 47
Joining a Scheduled Conference from a Conference Invitation............................................................ 47
Joining a Scheduled Conference from a Conference Schedule............................................................. 47
Joining a Scheduled Conference from the Notification Center............................................................. 48
Dialing into a Scheduled YMS Conference......................................................................................... 48
Watching Live Broadcast........................................................................................................................48
Meet Now........................................................................................................................................................... 49
Initiating a Meet Now Conference.........................................................................................................49
Dialing to Join a Meet Now Conference............................................................................................... 49
Permanent Virtual Meeting Room......................................................................................................................49
Joining a Permanent VMR from Directory............................................................................................49
Dialing into a Permanent Virtual Meeting Room.................................................................................. 50
Managing Video Conference.............................................................................................................................. 50
Appointing Yourself to be a Lecturer.................................................................................................... 51
Applying for Speaking........................................................................................................................... 51
Processing the Application..................................................................................................................... 51
Inviting Conference Participants............................................................................................................ 51
Removing Conference Participants........................................................................................................ 52
Muting or Unmuting All Conference Participants................................................................................52
Muting or Unmuting a Conference Participant......................................................................................53
Leaving Conference................................................................................................................................53
Ending Conference..................................................................................................................................53
Using the Third-party Video Conference Platforms........................................... 54
Using Basic Features.............................................................................................. 54
Viewing World Time.......................................................................................................................................... 54
Sharing Content.................................................................................................................................................. 55
Wired Sharing......................................................................................................................................... 55
Wireless Sharing..................................................................................................................................... 56
Recording Video................................................................................................................................................. 57
Starting or Stopping Recording Videos..................................................................................................57
Viewing Recorded Videos...................................................................................................................... 58
Copying Video from Local Storage to USB Storage.............................................................................58
Deleting Recorded Videos......................................................................................................................58
Screenshot........................................................................................................................................................... 59
Capturing Screenshots............................................................................................................................ 59
Viewing Screenshots...............................................................................................................................60
Copying Screenshot from Local Storage to USB Storage.....................................................................60
Deleing Screenshots................................................................................................................................61
Settings..................................................................................................................... 61
| Contents | v
Configuring Audio Settings................................................................................................................................61
Adjusting the Volume............................................................................................................................. 61
Configuring the Key Tone......................................................................................................................62
Enabling Silent Mode.............................................................................................................................62
Muting Microphone................................................................................................................................ 62
Configuring Video Settings................................................................................................................................ 63
Maximizing Monitor Video Display...................................................................................................... 63
Allowing Website Snapshot....................................................................................................................63
Changing the Video Input Source.......................................................................................................... 63
Screen Layout......................................................................................................................................... 64
Configuring Camera Settings............................................................................................................................. 67
Adjusting Cameras..................................................................................................................................68
Allowing the Far-End System to Control Your Camera........................................................................68
Setting Camera Presets........................................................................................................................... 69
Accessories with Your System............................................................................... 71
Supported Accessories........................................................................................................................................71
Using the CPW90 Wireless Microphones..........................................................................................................71
Viewing CPW90 Information.................................................................................................................71
Working Frequency.................................................................................................................................72
Using the CPW90-BT Bluetooth Wireless Microphones...................................................................................73
Viewing CPW90-BT Information using Remote Control......................................................................73
Viewing CPW90-BT Information using CP960 Conference Phone...................................................... 73
Using the CPE90 Wired Expansion Microphones............................................................................................. 73
Placing the CPE90..................................................................................................................................73
Muting or Unmuting the CPE90............................................................................................................ 74
Using the WPP20 Wireless Presentation Pod....................................................................................................74
Using the CPN10 PSTN Box.............................................................................................................................74
Using the VCC22 Video Conferencing Camera................................................................................................ 74
Controlling VCC22 Camera................................................................................................................... 75
Adjusting Camera Layout.......................................................................................................................75
Controlling the Multiple Remote Cameras............................................................................................ 76
Layouts of Multiple Display Screens.....................................................................................................76
Resetting Camera....................................................................................................................................76
| About This Guide | 6
About This Guide
Thank you for choosing the Yealink Full HD video conferencing system. It supports 1080P-full HD video
conferencing and includes outstanding features such as good compatibility, easy deployment and intelligent network
adaptability.
The video conferencing system is designed to help enterprises organize video conferences easily and efficiently. Users
can expect to enjoy the high-quality video conferencing experience very cost-effectively.
This guide provides everything you need to quickly use your new system. First, verify with your system administrator
that the IP network is ready for system configuration. Also be sure to read the Quick Start Guide in your package
before you set up and use the video conferencing system.
This user guide contains information for the following Yealink products:
• VC880 video conferencing system: it is the best choice for large rooms.
• VC800 video conferencing system and VC500 (Pro)video conferencing endpoint: they are the best choices for
small-to-middle enterprise.
• VC200 video conferencing endpoint: it is the best choice for huddle rooms.
Read the Yealink Products Regulatory Notices guide for all regulatory and safety guidance.
•Related Documentation
•In This Guide
Related Documentation
The following table shows documentations available for the video conferencing system.
Name Contents Where
found
Language
Yealink VC880 Full HD Video Conferencing
System Quick Start Guide
Yealink VC800 Full HD Video Conferencing
System Quick Start Guide
Yealink VC500 Full HD Video Conferencing
Endpoint Quick Start Guide
Yealink VC200 Full HD Video Conferencing
Endpoint Quick Start Guide
System installation
and network
configuration
On the
website/
In the
package
English/Chinese
Yealink VCR11 Remote Control Quick Reference
Guide
Using the VCR11
Remote Control
On the
website
English/Chinese
Yealink VCC22 Video Conferencing Camera
Quick Start Guide
Camera installation On the
website
English/Chinese
Yealink CPW90 Quick Start Guide How to connect
CPW90 wireless
expansion
microphones to
CP960 conference
phone
On the
website/
In the
package
English/Chinese
| About This Guide | 7
Name Contents Where
found
Language
Yealink CPW90 Wireless Microphones Quick
Start Guide
How to connect
CPW90 wireless
microphones to video
conferencing system
On the
website/
In the
package
English/Chinese
Yealink CPW90-BT Bluetooth Wireless
Microphones Quick Start Guide
How to connect
CPW90-BT bluetooth
wireless microphones
to video conferencing
system
On the
website/
In the
package
English/Chinese
Yealink CP960 HD IP Conference Phone Quick
Reference Guide
How to use CP960
conference phone.
On the
website
English/Chinese
Yealink Wi-Fi USB Dongle WF50 User Guide How to use connect
Wi-Fi or startse
wireless AP
On the
website
English/Chinese
Yealink PSTN Box CPN10 Quick Start Guide How to connect video
conferencing system
to the PSTN (Public
Switched Telephone
Network)
On the
website/
In the
package
English/Chinese
Yealink WPP20 Wireles Presentation Pod Quick
Start Guide
How to share content
using WPP20
wireless presentation
pod
On the
website/
In the
package
English/Chinese
Yealink WPP20 Wireless Presentation Pod Quick
Start Guide
How to use WPP20
wireless presentation
pod
On the
website
English/Chinese
Note: You can download the latest documents online: http://support.yealink.com/documentFront/
forwardToDocumentFrontDisplayPage.
In This Guide
Chapters in this guide include:
•Chapter 1 About This Guide
•Chapter 2 Getting Started with Your System
•Chapter 3 Managing the Directory
•Chapter 4 Managing the Call History
•Chapter 5 Operating Calls
•Chapter 6 Managing Local Video Conference
•Chapter 7 Using the Yealink VC Cloud Management Service Platform
•Chapter 8 Using the Yealink Meeting Server
•Chapter 9 Using the Third-party Video Conference Platforms
•Chapter 10 Using Basic Features
| Getting Started with Your System | 8
•Chapter 11 Settings
•Chapter 12 Accessories with Your System
Getting Started with Your System
The following topics introduce how to get started with your system.
•VCR11 Remote Control
•CP960 Conference Phone
•Powering On the System
•Powering Off the System
•Running the Setup Wizard
•Putting the System to Sleep
•Waking the System
•Screen and Icons
VCR11 Remote Control
The VCR11 remote control enables you to operate a video conferencing system. The operations include placing calls,
adjusting the volume, controlling the camera, navigating screens, and so on.
The following introduces the buttons of the VCR11 remote control and how to enter characters using your remote
control.
•Hardware of VCR11 Remote Control
•Entering Characters using the VCR11 Remote Control
Hardware of VCR11 Remote Control
The following table shows the parts of the remote control and includes descriptions for each part.
| Getting Started with Your System | 9
NO. Item Description
1 Power Key • Power the System On and Off.
• Put the system to sleep or wakes the system.
2 Video Recording
Key
Starts or stops recording video and audio.
3 Layout Key Adjust layout during a video call.
4 Custom Key The system administrator assigns a predefined function to this key. It is a
Presentation key by default.
5 Vol+ Increases the system volume.
6 Vol- Decreases the system volume.
7 Zoom in Key • Increases the camera zoom.
• Increases the captured image magnifications.
• Press it to page up in a multiple pages list.
8 Zoom out Key • Decreases the camera zoom.
• Decreases the captured image magnifications.
• Press it to page down in a multiple pages list.
9 OK Key Confirms actions or answers incoming calls.
| Getting Started with Your System | 10
NO. Item Description
10 Navigation Key • Navigate through menu items using the navigation keys.
• Pan and tilt the camera to adjust the viewing angle.
11 Mute Key Toggles mute feature.
12 Home Key • Returns to the idle screen when in the menu.
• Opens Talk Menu during a call.
13 Back Key Returns to the previous menu.
14 Off-hook Key • Enters the dialing screen.
• Places a call.
• Answers a call.
15 Delete Key • Deletes one character at a time.
• Long press to delete all characters in the input field.
• If the system connects a USB flash driver, you can long press it to start
capturing packets and long press it again to stop capturing packets.
16 On-hook Key • Ends a call or exits from a conference call.
• Returns to the idle screen.
17 Keypad Enters digits.
18 Character Key Generates special characters: .@*.
19 # Key Generates a pound key (#).
Note: The infrared sensor locates within the LED indicator of camera. Aim the remote control at the infrared
sensor to operate the camera.
Entering Characters using the VCR11 Remote Control
You can use onscreen keyboard on the monitor or use keypad on the remote control to enter characters.
•Enter Characters using Onscreen Keyboard
•Entering Characters using the Keypad
Enter Characters using Onscreen Keyboard
You need to be familiar with the onscreen keyboard before using it.
About this task
The following takes English input method as an example:
| Getting Started with Your System | 11
No. Item Description
1 26 English Letters Enter characters.
2 Switches to the uppercase input mode.
3 &123 Switches to the numeric&symbolic input mode.
4 Switches input method.
5 Space Key Enter a space.
6 Cursor Position a cursor
7 Hides the onscreen keyboard
8 Special Characters Enter the corresponding special character.
9 Delete Key • Press once to delete an entered character.
• Long press to delete two or more characters.
Procedure
1. In the editor area, select to open the onscreen keyboard.
2. Select characters on the onscreen keyboard to enter characters.
Entering Characters using the Keypad
The keypad of your remote contol only provides digit keys and #.@* keys.
Procedure
Press the keypad on the remote control to enter characters.
CP960 Conference Phone
The following introduces the hardware of the CP960 conference phone and how to enter characters using your CP960
conference phone.
•Hardware of CP960 Conference Phone
•Entering Characters using the CP960 Conference Phone
| Getting Started with Your System | 12
Hardware of CP960 Conference Phone
The following introduces the hardware of the CP960 conference phone and how to enter characters using your CP960
conference phone.
Hardware component instructions of the phone are:
NO. Item Description
1 Three Internal
Microphones
Supports 360-degree audio pickup at a radius of up to 6 meters.
2 Mute Touch Keys • Indicate phone and call statuses.
• Toggle mute feature.
3 Speaker provides hands-free (speakerphone) audio output.
4 Touch Screen 5 inch (720 x 1280) capacitive (5 point) touch screen with two idle screens.
Tap to select items and navigate menus.
Shows information about calls, messages, time, date and other relevant
data:
• Call information—caller ID, call duration
•Icons (for example, )
• Missed call list or second incoming caller information
• Prompt text (for example, “Save successfully!”)
• Time and date
5 Volume Touch Keys Adjust the volume of the speaker, ringer or media.
6 HOME Touch Key Returns to the idle screen.
7 Wired Mic Ports Connect CPE90 to your phone.
8 Internet Port • Connect to the VC Hub/Phone port on the video conferencing system.
• Connect to the Audio port on the VCH50 video conferencing hub.
9 Security Slot Allows you to connect a universal security cable to your phone so you can
lock down your phone. The phone will not be removed after locked.
| Getting Started with Your System | 13
NO. Item Description
10 3.5mm Audio-out Port This port is unavailable when CP960 conference phone works with the
video conferencing system.
11 Micro USB Port This port is unavailable when CP960 conference phone works with the
video conferencing system.
12 USB Port • Inserts a USB flash drive to one of the two USB ports for storing
screenshots, recording videos or capturing packets.
• Connects to the mini USB port on the charge cradle to charge the
CPW90 wireless expansion microphones.
Entering Characters using the CP960 Conference Phone
You can use onscreen keyboard on the CP960 conference phone or use onscreen dial pad on the dialing screen to enter
characters.
•Entering Characters using the Onscreen Keyboard
•Performing Other Operations using the Onsceen Keyboard
•Entering Characters using the Onscreen Dial Pad
Entering Characters using the Onscreen Keyboard
You need to be familiar with the onscreen keyboard before using it. The onscreen keyboard provides English (US)
and Google Pinyin input methods.
About this task
Android Keyboard (AOSP) – English (US) Input Method
The following shows English (US) input method:
No. Item Description
1 26 English Letters •Tap to enter letters.
• Long tap a key then slide to choose one of the
options to enter an alternate character.
2 Delete Key • Tap once to delete an entered character.
• Long tap to delete two or more characters.
Next Key Tap to go to the next field.3 Label automatically to
identify the context-
sensitive features. Send Key Tap to dial out the number.
| Getting Started with Your System | 14
No. Item Description
4 Two Special Characters • Tap to enter special characters.
• Long tap pointkey (.) then slide to choose one of the
options to enter an alternate character.
5 Space Key • Tap to enter spaces.
• Long tap to change input method.
6 Tap to switch to the numeric&symbolic input mode.
7 Tap to switch to the uppercase input mode.
Note: If you are using the numeric&symbolic input mode, you can tap =\< to switch to the symbolic input
mode.
Google Pinyin Input Method
You can long tap the space key to change input method from English (US) to Google Pinyinuse Google Pinyin input
method to enter Chinese.
Procedure
Tap characters on the onscreen keyboard to enter characters.
Performing Other Operations using the Onsceen Keyboard
| Getting Started with Your System | 15
About this task
If you want to Action
Position the cursor. Tap to position.
Select characters. 1. Long tap the entered character(s).
2. Do one of the following:
•Tap on the top of the touch screen to select all characters.
•Drag / to select partial characters.
Cut/Copy characters. 1. Select characters.
2. Tap CUT/POTY or / on the top of the touch screen to cut or copy.
3. Long tap the desired field.
4. Tap PASTE.
Delete more characters
at a time. Do one of the following:
•Long tap the entered character(s). Drag / to to select the characters you want to
delete, and then tap .
•Long tap .
Replace characters. 1. Drag your finger to highlight the characters you want to replace.
2. Enter the desired character.
Entering Characters using the Onscreen Dial Pad
The oncreen dial pad only provides digit keys and #.@* key.
Powering On the System
Your system starts up automatically after you connect an electrical supply. If your power off the system using the
remote control, do the following to power it up.
Procedure
On your remote control, press .
Your system is powered on successfully, and the LED on the system illuminates solid green.
Related tasks
Powering Off the System
Powering Off the System
Procedure
1. On your remote control, press .
2. Select Shut downand then press OK key.
The system shuts down immediately, and the LED on the camera goes out.
| Getting Started with Your System | 16
Related tasks
Powering On the System
Running the Setup Wizard
Your system offers a setup wizard to guide you into configuring your systems step by step, the setup wizard appears
automatically at first startup or factory reset.
Procedure
Run the setup wizard using your remote control or just tap Exit Boot Wizard on your CP960 conference phone to
skip the setup wizard.
Putting the System to Sleep
You can put the system to sleep immediately if you do not use it temporarily.
Procedure
1. On your remote control, press .
2. Select Sleepand then press OK key.
The system goes to sleep immediately.
Waking the System
You can wake your system from sleep if you want to use it.
Procedure
Do one of the following:
• On your remote control, press any button.
• On your CP960 conference phone, tap the touch screen or any key.
Screen and Icons
Before you use the system, you need to familiar with screen layouts and icons.
•Idle Screen
•Control Center/Notification Center
•Icon Instructions
Idle Screen
•Idle Screen of the Monitor
•Idle Screen of CP960 Conference Phone
Idle Screen of the Monitor
If the system starts up and you register a YMS account, the idle screen will be shown. The following figure is an
example:
| Getting Started with Your System | 17
Name Description
Time and Date The time and date are displayed on the left of the status bar.
Site name The site name of the system.
Status icon Status icons are displayed on the center of the status bar.
IP address • LAN: X.X.X.X: Indicates the system has obtained an IP address.
•Network disconnected: Indicates the system does not connect to a network cable.
Please check the network cable.
•255.255.255.255: Indicates the system fails to obtain an IP address. Check the
connection between the system and the DHCP server, or you can configure a static IP
address for the system.
Registered account Generally, your system administrator configures the account. If not, contact your system
administrator.
Dial Enter the dialing screen.
Meet Now When you register a Yealink Cloud account or YMS account, you can Initiate a meet now
conference.
More Configure the video conferencing system.
Video image Display local video image or local PC content.
Schedule When you register a Yealink Cloud account or YMS account, you can view conference
schedule.
Idle Screen of CP960 Conference Phone
| Getting Started with Your System | 18
NO. Name Description
1Status Bar Displays the icons and time.
2Digital Clock Widget Displays the phone’s time and date.
3Schedule When you register a Yealink Cloud account or YMS account, you can view
conference schedule.
4Applications Use the corresponding features.
5Screen Indicator Indicates which idle screen is displayed. You can swipe left or right to
switch among different screens.
Control Center/Notification Center
Control center or notification center of CP960 conference phone allows you to access to common features or view
important notifications quickly.
•Entering Control Center/Notification Center
•Exiting Control Center/Notification Center
Entering Control Center/Notification Center
Procedure
On your CP960 conference phone, swipe down from the top of the screen.
| Getting Started with Your System | 19
No. Name Description
1 Time and date Display the phone’s time and date.
2• Indicate the number of connected CPW90 wireless
expansion microphones.
• Tap to enter the wireless expansion microphone settings
screen.
3 Control Center Adjust the screen brightness or configure some features.
4 Notification Center Tap the desired notification message to view the details.
Exiting Control Center/Notification Center
Procedure
On your CP960 conference phone, do one of the following:
• Swipe up from the bottom of the screen.
• Tap the Home touch key.
Icon Instructions
Icons appear on the monitor and CP960 conference phone.
•Icons on the Monitor
•Icons on the CP960 Conference phone
Icons on the Monitor
Icons Descriptions
Network is available
Local camera status is disabled (only applicable to VC880/VC800/VC500)
| Getting Started with Your System | 20
Icons Descriptions
CP960 conference phone is not connected
Wi-Fi mode is on, but the system does not connet to the Wi-Fi
Wi-Fi mode is on, and the system has conneted to the Wi-Fi
Wireless hotspot is on, but no device connets to your wireless hotspot
Wireless hotspot is on, and some devices connet to your wireless hotspot
PSTN account is registered
SIP account is registered
H.323 account is registered
Log into the Yealink VC Cloud Management Service/Yealink Meeting Server
Log into the StarLeaf/Zoom/Pexip/BlueJeans/Mind platform
VCH50 video conferencing hub is connected to the video conferencing system
Auto answer
Missed calls
Output volume is 0
Do not disturb
• DD10 dongle is connected, while the CPW90 wireless microphones are unregistered.
• BT42 dongle is connected, while the CPW90-BT bluetooth wireless microphones are
unregistered.
• DD10 dongle is connected, and the CPW90 wireless microphones are registered.
• BT42 dongle is connected, and the CPW90-BT are registered.
Dual-screen mode
Wired sharing (when a PC is connected to the VCH50 video conferencing hub)
Wireless sharing (using WPP20 wireless presentation pod to share PC content)
| Getting Started with Your System | 21
Icons Descriptions
A USB flash drive is inserted
VPN is enabled
Call mute
Call encryption
Call is held
Output volume is 0 during a call
Camera that being controlled
Indicates the content displayed on the second monitor
Records video and audio to your system memory (only applicable to VC200)
Records video and audio to your PC using Yealink Wireless Presentation Pod
Records video and audio to your USB flash drive
Dialed calls (H.323 account/SIP account/IP Call)
Dialed calls (Cloud platform)
Received calls (H.323 account/SIP account/IP Call)
Received calls (Cloud platform)
Missed calls (H.323 account/SIP account/IP Call)
Missed calls (Cloud platform)
Local contact
Conference contact (It is only applicable to the VC880/VC800 system with a imported
multipoint license. It is not applicable to VC500/VC200 endpoint)
Yealink Cloud contacts or YMS contacts
Permanent Virtual Meeting Room
Third party devices
| Getting Started with Your System | 22
Icons Descriptions
Room system
Places video calls
Places voice calls
Icons on the CP960 Conference phone
Icons Descriptions
Auto answer
Missed calls
Do not disturb
The number of connected CPW90 wireless expansion microphones
Call mute
Output volume is 0
Call encryption
Local contact
Conference contact (It is only applicable to the VC880/VC800 system with a imported multipoint
license. It is not applicable to VC500/VC200 endpoint)
Yealink Cloud contacts or YMS contacts
Permanent Virtual Meeting Room
Third party devices
Room system
Dialed calls (H.323 account/SIP account/IP Call)
Dialed calls (Cloud platform)
Received calls (H.323 account/SIP account/IP Call)
| Managing the Directory | 23
Icons Descriptions
Received calls (Cloud platform)
Missed calls (H.323 account/SIP account/IP Call)
Missed calls (Cloud platform)
Managing the Directory
Your system supports several types of directories.
•Local Directory
•Cloud Directory
•Enterprise Directory
•Searching for Directory
Local Directory
Local directory includes local contacts and local conference contqcts. You can add, edit, delete, search or simply
dial a contact from the local directory. Conference contact is only applicable to the VC880/VC800 video conference
system that has a multipoint license, it is not applicable to VC500/VC200 video conference endpoint.
•Adding Local Contacts and Conference Contacts
•Editing Contacts
•Deleting Contacts
Adding Local Contacts and Conference Contacts
•Adding a Local Contact
•Adding a Conference Contact
Adding a Local Contact
You can add 500 local contacts to your system at most.
Procedure
1. On your remote control, navigate to Dial > Directory > New Contact.
2. Enter contact name in theNew Contact field.
3. Enter contact number or IP address in theNumber field.
4. Select Add New Numberto add more numbers.
Up to 3 numbers can be added to a local contact.
5. Select the desired contact bandwidth from the pull-down list of Bandwidth.
The default contact bandwidth is Auto. It means the system will select the appropriate bandwidth automatically
when placing a call to this contact.
6. Select Save and then press OK key to accept the change.
| Managing the Directory | 24
Adding a Conference Contact
You can add 100 conference contact to your system at most. You can call the conference contact to initiate a
conference call .
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select Conference Contacts from the pull-down list of All Contacts.
3. Select New Conference, and then press OK key.
4. Enter conference name in the Name field.
5. Enter a few characters of the contact name or the contact number in the Searchfield.
Contacts whose name or number matches the characters entered will appear on the screen.
6. Select the desired local contact, and then press OK key to add the desired local contacts to the members List.
7. Repeat steps 5 to 6 to add more local contacts.
8. Select Save and then press OK key to accept the change.
Note: The number of local contacts that you can add to a conference contact depends on the imported
multipoint license. For example, if you import a 24 ways license to your VC800 system, up to 24 local
contacts can be added to a conference contact. For more information on multipoint license, contact your
system administrator.
Editing Contacts
You can change or add more information to your local contacts and conference contacts at any time using remote
control or CP960 conference phone.
•Editing Contacts using Remote Control
•Editing Contacts using CP960 Conference Phone
Editing Contacts using Remote Control
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select Local or Conference Contacts from the pull-down list of the All Contacts.
3. Select the desired contact and then press the right key.
4. Select Edit and then press OK key.
5. Edit the contact information.
6. Select Save and then press OK key to accept the change.
Editing Contacts using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap the All Contacts field.
3. Tap Local or Conference contacts in the pop-up dialog box.
4. Tap after the desired contact.
5. Edit the contact information.
6. Tap √ to accept the change.
| Managing the Directory | 25
Deleting Contacts
You can delete a local contact or conference contact using remote control or CP960 conference phone.
•Deleting Contacts using Remote Control
•Deleting Contacts using CP960 Conference Phone
Deleting Contacts using Remote Control
Procedure
1. On your remote control, navigate to Dial > Directory.
2. SelcectLocal or Conference Contacts from the All Contacts pull-down list.
3. Select the desired contact and then press the right key.
4. Select Delete and then press OK key.
The monitor prompts “Delete selected item?”
5. Select OK, and then press OK key to delete the local contact.
Deleting Contacts using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap the All Contacts field.
3. Tap Local or Conference contacts in the pop-up dialog box.
4. Tap after the desired contact.
5. Tap Delete.
The touch device prompts “Delete selected item?”
6. Tap OK to accept the change.
Cloud Directory
Cloud directory appears only when you register a Yealink Cloud account. Contact your system administrator for more
information.
Cloud directory includes all Yealink Cloud contacts which are created by your Yealink Cloud enterprise administrator.
Note that only theYealink Cloud enterprise administrator can add, edit and delete Yealink Cloud contacts on the
Yealink VC Cloud Management Service platform. On your system, you can only search for and place calls to the
Yealink Cloud contacts. For more information on Yealink VC Cloud Management Service platform, refer to Yealink
VC Cloud Management Service Administrator Guide.
There are three types of YMS contact:
•Contact: The users who have Yealink Cloud accounts. The Yealink Cloud enterprise administrator can create
departments for contacts.
•Room system: The devices with registered Yealink Cloud accounts in the video meeting room.
•VMR: It is also called the Permanent VMR. TheYealink Cloud enterprise administrator can determine whether to
synchronize the permanent VMR to your system.
Related tasks
Using the Yealink VC Cloud Management Service Platform
| Managing the Call History | 26
Enterprise Directory
Enterprise directory appears only when you log into the Yealink Meeting Server. Contact your system administrator
for more information.
Enterprise directory includes all YMS contacts which are created by your enterprise administrator. Note that only the
enterprise administrator can add, edit and delete YMS contacts on the Yealink Meeting Server. On your system, you
can only search for and place calls to the YMS contacts. For more information on Yealink Meeting Server, please
refer to Yealink Meeting Server Administrator Guide.
There are four types of YMS contact:
•User: The users have YMS accounts. The enterprise administrator can create departments for users.
•Room system: The devices registered YMS accounts in the video meeting room.
•Third party device: The devices without YMS accounts.
•VMR: It is also called the Permanent VMR. The enterprise administrator can determine whether to synchronize
the permanent VMR to your system.
Related tasks
Using the Yealink Meeting Server
Searching for Directory
You can enter search criteria to find desired contact quickly using remote control or CP960 conference phone.
•Searching for Directory using Remore Control
•Searching for Directory using CP960 Conference Phone
Searching for Directory using Remore Control
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Enter a few or all characters of the contact name or numbers in the Search field.
The contacts whose names or phone numbers match the characters entered will appear on the monitor.
Searching for Directory using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap .
3. Enter a few or all characters of the contact name or numbers.
The contacts whose names or phone numbers match the characters entered will appear on the touch screen.
Managing the Call History
The system maintains call history lists of Missed Calls, Placed Calls and Received Calls.
•Viewing History Records
•Adding a History Record to Local Directory
•Deleting History Records
| Managing the Call History | 27
Viewing History Records
You can view up to 100 history records using remote control or CP960 conference phone.
•Viewing History Records using Remote Control
•Viewing History Records using CP960 Conference Phone
Viewing History Records using Remote Control
Procedure
1. On your remote control, navigate to Dial > History.
2. Select the desired list from the pull-down list of All Calls.
The display screen displays all history records.
Viewing History Records using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap History.
2. Tap the All Calls field, and tap the desired list in the pop-up dialog box.
3. Tap after the desired call records.
The touch screen displays details about this call record.
Adding a History Record to Local Directory
You can add a history record to the local directory.
•Adding a History Record to Local Directory using Remote Control
•Adding a History Record to Local Directory using CP960 Conference Phone
Adding a History Record to Local Directory using Remote Control
Procedure
1. On your remote control, navigate to Dial > History.
2. (Optional) Select the desired list from the pull-down list of All Calls.
3. Select the desired history record and then press the right key.
4. Select Add to Contact, and then press OK key.
5. Enter contact name in the Name field.
6. (Optional.) You can add more than one number for the local contact.
7. Select Saveand then press OK key to accept the change.
Adding a History Record to Local Directory using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap History.
The touch screen displays all call records.
2. Tap after the desired call records.
| Operating Calls | 28
3. Tap Add to Contact.
4. Enter contact name in the Name field.
5. (Optional.) You can add more than one number for the local contact.
6. Tap √ to accept the change.
Deleting History Records
You can delete a history record or all history records.
•Deleting a History Record using CP960 Conference Phone
•Deleting a History Record using Remote Control
•Deleting All History Records using Remote Control
Deleting a History Record using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap History.
The touch screen displays all call records.
2. Tap after the desired call records.
3. Tap Delete.
The touch device prompts “Delete selected item?”
4. Tap OK to accept the change.
Deleting a History Record using Remote Control
Procedure
1. On your remote control, navigate toDial > History.
2. Select the desired list from the pull-down list of All Calls.
3. Select the desired history record and then press the right key.
4. Select Delete, and then press OK key.
Deleting All History Records using Remote Control
Procedure
1. On your remote control, navigate to Dial > History.
2. Select Clear, and then press OK key.
You can also select the desired history list from the pull-down list of All Calls first, and then delete the selected
list.
The monitor prompts ”Delete all records?”.
3. Select OK, and then press OK key.
Operating Calls
The following contents are about call operations.
| Operating Calls | 29
•Placing a Call
•Joining the Virtual Conference Room
•Answering Calls
•Turning off Local Camera
•Rejecting Incoming Calls
•Ending a Call
Placing a Call
You can use your system just like a regular phone to place calls in numerous ways easily.
•Placing a Call by Entering a Number
•Editing Numbers before Calling
•Placing a Call from the Search Result
•Placing a Call from the Directory
•Placing a Call from the Call History
Placing a Call by Entering a Number
You can dial different types: contact numbers, SIP URI (for example: 2210@sip.com), IP address (for example:
192.168.1.15), H. 323 account, SIP account, Cloud account or PSTN account. You can use different call type (Cloud
platform/H.323 account/SIP account/PSTN account/H.323 IP Call/SIP IP Call) to dial a number when more than
one account is registered on your system.
•Placing a Call by Entering a Number using Remote Control
•Placing a Call by Entering a Number using CP960 Conference Phone
Placing a Call by Entering a Number using Remote Control
Procedure
1. On your remote control, navigate to Dial.
2. (Optional) Select the desired call type from the pull-down list of Call Type before calling.
3. Enter the desired number.
4. Press OK key to place a video call.
If you want to place a voice call, press the right key to select (voice call).
Placing a Call by Entering a Number using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Dial.
2. (Optional) Tap the Auto field, and tap the desired call type in the pop-up dialog box.
3. Enter the desired number.
4. Tap Send.
Editing Numbers before Calling
You can edit history records before calling.
•Editing Numbers before Calling using Remote Control
•Editing Numbers before Calling using CP960 Conference Phone
Editing Numbers before Calling using Remote Control
| Operating Calls | 30
Procedure
1. Do one of the following:
• On your remote control, navigate to Dial .
• On your remote control, navigate to Dial > History.
2. Select the desired history record and then press the right key.
3. Select Edit before calling and then press OK key.
4. Edit the number and dial out.
Editing Numbers before Calling using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Dial or History.
2. Tap after the desired history record.
3. Tap Edit before calling.
4. Edit the number and tap Send.
Placing a Call from the Search Result
You can enter search crieria on the dialing screen to find your desired contact or number, and then place a call.
Note: By default, the search source list includes local directory, history, cloud contacts and enterprise
directory. Your system administrator can configure the search source list.
•Placing a Call from the Search Result using Remote Control
•Placing a Call from the Search Result using CP960 Conference Phone
Placing a Call from the Search Result using Remote Control
Procedure
1. On your remote control, navigate to Dial.
2. (Optional) Select the desired call type from the pull-down list of Call Type before calling.
3. Enter a few continuous characters of the contact name or continuous numbers of the contact number to search for
a desired contact.
4. Select a desired contact to dial out.
Placing a Call from the Search Result using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Dial.
2. (Optional) Tap the Auto field, and tap the desired call type in the pop-up dialog box.
3. Enter a few continuous characters of the contact name or continuous numbers of the contact number to search for
a desired contact.
4. Tap the desired contact.
Placing a Call from the Directory
You can place a call from the directory.
•Placing a Call from the Directory using Remote Control
•Placing a Call from the Directory using CP960 Conference Phone
| Operating Calls | 31
Placing a Call from the Directory using Remote Control
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select the desired contact type from the pull-down list of the All Contacts.
3. Select the desired contact and then press OK key to palce a video call.
If you want to place a voice call, press the right key to select Voice Call.
Placing a Call from the Directory using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap the All Contacts field.
3. Tap the desired type in the pop-up dialog box.
4. Tap after the desired contact.
Placing a Call from the Call History
You can place a call from the call history. The call history includes missed calls, placed calls and received calls.
•Placing a Call from the Call History using Remote Control
•Placing a Call from the Call History using CP960 Conference Phone
Placing a Call from the Call History using Remote Control
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select the desired list from the pull-down list of All Calls.
3. Select the desired call record and then press OK key to place a video call.
If you want to place a voice call, press the right key to select Voice Call.
Placing a Call from the Call History using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap History.
2. Tap the All Calls field, and tap the desired list in the pop-up dialog box.
3. Tap the desired call record to place a video call.
If you want to place a voice call, tap after the desired call record, and then tap Voice Call.
Joining the Virtual Conference Room
Video conferencign system can act as a virtual meeting room, so that other devices can call the desired video
conferencing system to join a meeting.
Procedure
Do one of the following to enter the virtual meeting room:
• If the virtual meeting room requires no password, dial IP address or account.
| Operating Calls | 32
• If the virtual meeting room requires a password, dial IP##meeting password or meeting password@IP .
Example
The IP address of virtual meeting room is 10.3.6.201.
123 is meeting password.
You can dial 10.3.6.201##123 or 123@10.3.6.201 to enter the virtual meeting room.
Answering Calls
You can answer calls in various ways.
•Configuring Auto Answer
•Configuring Answering Multiple Calls Automatically
•Configuring Muting Automatically Answered Calls
•Answering a Call Manually
Configuring Auto Answer
You can enable auto answer feature to answer a call automatically. So that participants can join your conference call
conveniently.
Note: Auto answer feature may create security issues. An unexpected caller can view your video conference
room randomly.
•Configuring Auto Answer using Remote Control
•Configuring Auto Answer using CP960 Conference Phone
Configuring Auto Answer using Remote Control
Procedure
1. On your remote control, navigate to More > Settings > Call Features.
2. Check or uncheck the Auto Answer checkbox.
Configuring Auto Answer using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, swipe down from the top of the screen.
2. Tap Auto Answer.
Configuring Answering Multiple Calls Automatically
You can enable auto answer multiway feature, so that when you are in an active call and an incoming call arrives on
the system, the incoming call will be answered automatically.
Procedure
1. On your remote control, navigate to More > Setting > Call Features.
2. Check the Auto Answer Multiway checkbox.
Note: Auto answer multiway feature may create security issues. An unexpected caller can could interrupt
a meeting in progress.
| Operating Calls | 33
Configuring Muting Automatically Answered Calls
You can choose to mute the local microphones when a call is answered automatically. This avoids the caller hearing
local conversation freely.
Procedure
1. On your remote control, navigate to More > Setting > Call Feature.
2. Check the Auto Answer Mute checkbox.
Auto answer mute feature takes effect only when auto answer feature is enabled.
Answering a Call Manually
If the system is not set to answer calls automatically, you can choose to answer an incoming call manually.
Procedure
Do one of the following:
•On your remote control, press or select Answer first, and then press OK key.
• On your CP960 conference, tap Answer.
Turning off Local Camera
If you do not want to show local video during a call, you can turn off your local camera.
•Turning off Local Camera using Remote Control
•Turnning off Local Camrera using CP960 Conference Phone
Turning off Local Camera using Remote Control
Procedure
On your remote control, press or OK key to open Talk Menu during a call,and then select Camera Off.
Turnning off Local Camrera using CP960 Conference Phone
Procedure
On your CP960 conference phone, tap More > Camera during a call.
Rejecting Incoming Calls
When you receive an incoming call, you can choose to reject the call instead of answering.
•Rejecting an Incoming Call Manually
•DND (Do Not Disturb)
Rejecting an Incoming Call Manually
Procedure
Do one of the following:
| Operating Calls | 34
•On your remote control, press or select Reject first, and then press OK key.
• On your CP960 conference, tap Reject.
DND (Do Not Disturb)
You can enable do not disturb feature to reject incoming calls automatically. All calls you reject will be logged to
Missed Calls list.
•Enabling DND when Not in a Call using Remote Control
•Enabling DND when Not in a Call using CP960 Conference Phone
•Enabling DND during an Active Call using Remote Control
•Enabling DND during an Active Call using CP960 Conference Phone
Enabling DND when Not in a Call using Remote Control
If you do not want to receive calls, you can use the DND mode to reject incoming calls automatically.
Procedure
1. On your remote control, navigate to More > Setting > Call Features > DND.
2. Check the checkbox.
3. Press to return to the idle screen.
The icon will appear on the status bar of monitor, and “Do not disturb now!” will be prompted at intervals.
Enabling DND when Not in a Call using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, swipe down from the top of the screen.
2. Tap DND.
If the DND feature is enabled, the touch screen prompts “ DND mode is enabled”.
Enabling DND during an Active Call using Remote Control
You can use the DND mode to reject incoming calls automatically during an active call. The DND feature will be
disabled automatically after the call ends.
Procedure
1. On your remote control, press or OK key to open Talk Menu during a call.
2. Select DND and then press OK key.
The icon will appear on the status bar of the monitor, and “Do not disturb now!” will be prompted at intervals.
3. Press to return.
Enabling DND during an Active Call using CP960 Conference Phone
Procedure
On your CP960 conference phone, tap More > DNDduring a call.
The icon will appear on the status bar of the touch screen.
| Managing Local Video Conference | 35
Ending a Call
You can end a call using remote control or CP960 conference phone.
Procedure
Do one of the following:
•On your remote control, press .
• On your CP960 conference phone, tap EndCall.
Managing Local Video Conference
VCS can use own MCU (multi control unit) to hold local video conference. Local video conference involves at least
three different endpoints or sites. You can use Yealink wireless presentation pod software to manage members in local
video conference.
•Initiating a Local Video Conference
•Removing Conference Participants
•Muting All Conference Participants
•Unmuting All Conference Participants
•Muting a Conference Participant
•Unmuting a Conference Participant
•Ending the Conference
Initiating a Local Video Conference
You can initiate a conference call by dialing a group or inviting participants during a call.
•Initiating a Conference by Dialing a Group
•Initiating a Conference by Inviting Participants
Initiating a Conference by Dialing a Group
You can add multiple contacts to a group, and then dial all contacts in this group to initiate a conference call.
About this task
Note: For VC880/VC800 system: the number of contacts you can call depends on the imported multipoint
license. For VC500/VC200 endpoint: you can select up to 6 contacts.
•Dialing a Group using Remote Control
•Dialing a Group using CP960 Conference Phone
Dialing a Group using Remote Control
Procedure
1. On your remote control, navigate to Dial > Group Dial.
2. Select the desired contacts you want to call.
3. Press the right key.
4. Select Start conference call, and then press OK key.
| Managing Local Video Conference | 36
Dialing a Group using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory。
2. Tap the Call multiple members? Click here field.
3. Tap the desired contacts you want to call.
4. Tap .
Initiating a Conference by Inviting Participants
About this task
You can invite contacts during a call to initiate a conference.
Note: For VC880/VC800 system: the number of contacts you can invite depends on the imported multipoint
license. For VC500/VC200 endpoint: there can be 6 people at most in a conference call
•Inviting Participants using Remote Control
•Inviting Participants using CP960 Conference Phone
Inviting Participants using Remote Control
Procedure
1. On your remote control, press or OK key to open Talk Menu during a call, .
2. Select New Call and then press OK key.
3. Do one of the following:
• Select Dial, enter a phone number, and then dial out.
• Select Directory, select a desired contact, and then dial out.
• Select Group Dial, check the desired contacts’ checkboxes, and then select Start conference call.
• Select History, select the desired history record, and then dial out.
5. Repeat the above steps until all participants are added.
Note: You can press to enter the pre-dialing screen during a call.
Inviting Participants using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Invite during a call.
2. Do one of the following:
•If you tap , enter a phone number and then tap Invite.
•If you tap , tap a desired contact to dial out.
•If you tap , tap the desired history record to dial out.
•If you tapCall multiple members? Click here, tap the desired contacts you want to call, and then tap .
3. Repeat steps 2 to 3 until all participants are added.
| Managing Local Video Conference | 37
Removing Conference Participants
If you are the moderator of a video conference, you can remove conference participants during a call.
•Removing Conference Participants using Remote Control
•Removing Conference Participants using CP960 Conference Phone
Removing Conference Participants using Remote Control
Procedure
1. On your remote control, press or OK key to open Talk Menu.
2. Select Remove and then press the right key.
3. Select the party you want to remove, and then press OK key.
Removing Conference Participants using CP960 Conference Phone
Procedure
1. Tap Members during a conference call.
2. Tap to remove the desired participant.
Muting All Conference Participants
If you are the moderator of a video conference, you can mute all conference participants.
Procedure
1. On your CP960 conference phone, tap Members during a conference call.
2. Tap All mute to mute all participant.
Unmuting All Conference Participants
If you are the moderator of a video conference, you can unmute all conference participants.
Procedure
1. On your CP960 conference phone, tap Members during a conference call.
2. Tap All unmute to unmute all participant.
Muting a Conference Participant
If you are the moderator of a video conference, you can mute any conference participant.
Procedure
1. On your CP960 conference phone, tap Members during a conference call.
2. Tap after the participant that you want to mute.
| Using the Yealink VC Cloud Management Service Platform | 38
The participant is muted, and the icon changes to .
Unmuting a Conference Participant
If you are the moderator of a video conference, you can unmute any conference participant.
Procedure
1. On your CP960 conference phone, tap Members during a conference call.
2. Tap after the participant that you want to unmute.
The participant is unmuted, and the icon changes to .
Ending the Conference
All participants leave the conference if you end the conference.
•Ending the Conference using Remote Control
•Ending the Conference using CP960 Conference Phone
Ending the Conference using Remote Control
Procedure
1. On your remote control, press .
The monitor prompts “End all active calls?”
2. Select OK, and then press OK key.
Ending the Conference using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap EndCall.
The CP960’s touch screen prompts “End all active calls?”
2. Tap OK.
Using the Yealink VC Cloud Management Service Platform
The Yealink VC Cloud Management Service is a value-added cloud-based service platform for Cloud endpoints.
It offers significant convenience and cost-savings to integrators and business customers in terms of deployment,
configuration and usage.
About this task
When you register a Yealink Cloud account, you can use Yealink Cloud video conference feature.
There are three types of Yealink Cloud video conference:
| Using the Yealink VC Cloud Management Service Platform | 39
•Scheduled conference: You should schedule the conference using the Yealink VC Cloud Management Service or
Microsoft Outlook software.
•Meet Now: You can initiate a meet now conference at any time, without a reservation.
•Permanent Virtual Meeting Room: The permanent VMR is created by your Yealink Cloud enterprise enterprise
administrator. You can join the permanent VMR at any time without a reservation.
With the Yealink Cloud video conferencing feature, you can do the following:
• View and join scheduled conferences.
• Initiate and join meet now conferences.
• Join the permanent VMR.
• Manage Yealink Cloud video conferences.
Note: If more than one system registered the same Yealink Cloud account join the same conference, the
former system which joined the conference will leave the conference automatically. The conference only
allows one of them to join the conference.
•Dialing Yealink Cloud Accounts
•Scheduled Conference
•Meet Now
•Permanent Virtual Meeting Room
•Managing Yealink Cloud Video Conference
Dialing Yealink Cloud Accounts
If you want to place a call to a Yealink Cloud contact who is in the same Yealink Cloud directory as you, you can
enter the 9-digit Cloud number or the extension (the last four Cloud number) to place a call. If you want to place a
call to a Yealink Cloud contact who is in different Yealink Cloud directory from you, you can enter the 9-digit Cloud
number to place a call only. Cloud call is encrypted by default. You will see an encryption icon during a Cloud call.
Related information
Placing a Call by Entering a Number
Scheduled Conference
•Viewing Scheduled Conferences
•Joining a Scheduled Conference from a Conference Reminder
•Joining a Scheduled Conference from a Conference Schedule
•Joining a Scheduled Conference from the Notification Center
•Dialing into a Cloud Scheduled Conference
Viewing Scheduled Conferences
You can schedule a conference using the Yealink VC Cloud Management Service or Microsoft Outlook software.
The scheduled conference will be added to all invitees’ video conferencing system. And invitee whose Yealink Cloud
account is associated with an email address, will receive an email about how to join the conference.
Procedure
On your monitor or CP960 conference phone, do one of the followings:
• On the idle screen, view the upcoming or ongoing conference schedules for today.
• On the idle screen, select the upcoming or ongoing conference schedules for today to see schedule list. Your
ongoing conferences and upcoming conferences are listed for the latest month.
| Using the Yealink VC Cloud Management Service Platform | 40
Joining a Scheduled Conference from a Conference Reminder
A reminder pop-up is displayed 15 minutes before the conference starts. The reminder shows the main information of
the schedule, including subject, date & time and organizer.
Procedure
On your remote control or CP960 conference phone, do one of the following:
• Select Join to join the scheduled conference.
• Select Detail to view conference details.
• Select Ignore to remove the reminder from the screen and stop all future reminders for this schedule.
Note: When the system is in a call, the conference reminder will not pop up. If the call ends and the
scheduled conference is still ongoing, the reminder will pop up. But if the scheduled conference ends, the
reminder will not pop up.
Joining a Scheduled Conference from a Conference Schedule
By default, you can join a scheduled conference that is about to take place in 15 minutes or less. This time can be
changed by Yealink Cloud enterprise administrator.
Procedure
1. On your remote control or CP960 conference phone, navigate to Schedule ( ).
Your ongoing conferences and upcoming conferences are listed for the latest month.
2. Select the desired conference.
3. When the conference is about to take place in 15 minutes or less, select Join.
Joining a Scheduled Conference from the Notification Center
By default, when the conference is about to take place in 15 minutes, the status bar of CP960 conference phone
displays the icon and the notification center displays the conference information.
Procedure
1. On your CP960 conference phone, swipe down from the top of the screen to enter the notification center.
2. Tap the desired conference notification to join the conference.
Dialing into a Cloud Scheduled Conference
About this task
If you schedule a conference or you are invited to a scheduled conference, you can obtain the conference information
in following ways:
• Invitee will receive an email, which includes the IP address, conference ID and conference password.
• Your system and CP960 conference phone will display conference information, which includes the conference ID
and conference password.
• Contact the conference participants.
Procedure
Do one of the following:
• If you register a Yealink Cloud account, dial the conference ID to join the conference.
• If you do not register a Yealink Cloud account, dial server address to join the conference.
| Using the Yealink VC Cloud Management Service Platform | 41
• For SIP devices, dial conference ID**conference password@server address or server
address##conference ID**conference password to join the conference
Meet Now
When you register a Yealink Cloud account, you can initiate a meet now conference at any time, without a
reservation.
•Initiating a Meet Now Conference
•Dialing into a Meet Now Conference
Initiating a Meet Now Conference
Procedure
Do one of the following:
• On your remote control, navigate to Meet Now.
• On your CP960 conference phone, tap Meet Now.
Note: In meet now conference, if you receive a call from a Yealink Cloud contact, a reminder will prompt
that you can allow or refuse the contact to join your conference.
Dialing into a Meet Now Conference
You can dial to join a meet now conference that is initiated by others. And you can obtain the conference information
from the conference participants.
Procedure
Do one of the following:
• If you register a Yealink Cloud account, dial the conference ID to join the conference.
• To join from a SIP device, dial conference ID** @ server address or server address##conference ID to join
the conference.
Permanent Virtual Meeting Room
The Yealink Cloud enterprise administrator can configure the permanent VMR via the Yealink VC Cloud
management service platform. You can join the permanent VMR at any time, without a reservation.
•Joining a Permanent VMR from Yealink Cloud Directory
•Dialing into a Permanent Virtual Meeting Room
Joining a Permanent VMR from Yealink Cloud Directory
Make sure that your Yealink Cloud enterprise administrator has synchronized the permanent VMR to your system via
the Yealink VC Cloud management service. So that your Cloud directory can display the permanent VMR.
•Joining a Permanent VMR using Remote Control
•Joing a Permanent VMR using CP960 Conference Phone
Joining a Permanent VMR using Remote Control
| Using the Yealink VC Cloud Management Service Platform | 42
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select Cloud from the pull-down list of the All Contacts.
3. Select Virtual Meeting Room and then press OK key.
4. Select the desired permanent VMR, and then pressOK key to place a video call.
If you want to place a voice call, press the right key to select Voice Call.
Joing a Permanent VMR using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap the All Contacts field.
3. Tap Cloud in the pop-up dialog box.
4. Tap Virtual Meeting Room.
5. Tap the desired permanent VMR to place a video call.
If you want to place a voice call, tap after the desired permanent VMR and then taoVoice Call.
Dialing into a Permanent Virtual Meeting Room
You can dial to join a permanent VMR. Obtain the conference information from the conference participants.
Procedure
Do one of the following:
• If you register a Yealink Cloud account, dial the conference ID to join the conference.
• For SIP devices, if you do not register a Yealink Cloud account and the permanent VMR requires no password,
dial conference ID**@ server address or conference ID**@ server address to join the permanent VMR.
• For SIP devices, if you do not register a Yealink Cloud account and the permanent VMR requires a
password, dial conference ID** conference password@ server address or server address ##conference
ID**conference password to join the permanent VMR.
Managing Yealink Cloud Video Conference
The following introduces how to manage Yealink Cloud video conference. The Yealink Cloud video conferences
include scheduled conferences, meet now conferences and permanent Virtual Meeting Room (VMR).
•Appointing Yourself to be a Lecturer
•Applying for Speaking
•Processing the Application
•Inviting Conference Participants
•Removing Conference Participants
•Muting or Unmuting All Conference Participants
•Muting or Unmuting a Conference Participant
•Leaving Conference
•Ending Conference
Appointing Yourself to be a Lecturer
There are two modes for scheduled conferences and permanent VMR: Discussion mode and Training mode. The
conference mode can be configured by on the Yealink VC Cloud Management Service only.
| Using the Yealink VC Cloud Management Service Platform | 43
About this task
• In Discussion mode conference, participants can speak freely.
• In Training mode conference, all guests need to wait for the moderator to appoint lecturers.
Procedure
1. On your CP960 conference phone, tap More > Begin Speaking during a conference.
2. To finish speaking, tap More > Finish Speaking.
Applying for Speaking
In Training mode conference, all guests are muted automatically except the moderator (or the organizer). Guests
should apply for speaking and wait the the moderator to allow the application.
Procedure
When you enter the Training mode conference as a guest, your monitor prompts: “Please press to apply for
speaking” in first 30 seconds, do one of the following to apply for speaking:
•On your remote control, press .
• On your CP960’s touch screen, tap Applying.
• On your CP960 conference phone, tap the mute key.
• On your CPW90 wireless microphones, tap the mute key.
• On your CPW90-BT bluetooth wireless microphones, tap the mute key.
• On your CPE90 wired expansion microphones, tap the mute key.
Processing the Application
If you are the moderator (or an organizer) of a Training mode conference, you can allow or clear the application.
Procedure
When participant is applying for speaking, on your CP960 conference phone, do one of the following:
• Tap Allow to allow the applicant to speak.
• Tap Members during a call.
•Tap to allow the applicant to speak or tap Clear handup to clear all requests.
Inviting Conference Participants
During the YMS video conference, you can invite other YMS contacts to join the conference.
•Inviting Conference Participants using Remote Control
•Inviting Conference Participants using CP960 Conference Phone
Inviting Conference Participants using Remote Control
Procedure
1. On your remote control, press or OK key to open Talk Menu.
2. Select Invite and then press Ok key.
3. Do one of the following:
• If you select Dial, enter a YMS account, and then dial out.
| Using the Yealink VC Cloud Management Service Platform | 44
• If you select Group Dial, select the desired department and check the desired YMS contacts’ checkboxes, and
then select Start conference call.
4. Repeat above steps until all participants are added.
Inviting Conference Participants using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tapInvite.
2. Do one of the following:
•If you tap , select the desired department and tap the desired Yealink Cloud contacts, and then tap to dial
out.
•If you tap , enter a Yealink Cloud account, and then tap Add Members.
Repeat this step to add more members, and then tap to dial out.
Removing Conference Participants
You can remove conference participants when you are the organizer/moderator of a Yealink Cloud video conference.
•Removing Conference Participants using Remote Control
•Removing Conference Participants using CP960 Conference Phone
Removing Conference Participants using Remote Control
Procedure
1. On your remote control, press or OK key to open Talk Menu during a call.
2. Select Remove and then press the right key.
3. Select a member that you want to remove, and then press OK key.
Removing Conference Participants using CP960 Conference Phone
Procedure
On your CP960 conference phone, tap Members during a call.
The touch screen displays all participants.
Tap after the participant that you want to remove.
Muting or Unmuting All Conference Participants
If you are the organizer/moderator of a Yealink Cloud video conference, you can mute or unmute all conference
participants except for yourself. And the muted participants cannot unmute themselves without your permission.
Procedure
1. On your CP960 conference phone, tap Members during a call.
The touch screen displays all participants.
2. Tap All mute or All unmute to mute/unmute all participants.
| Using the Yealink VC Cloud Management Service Platform | 45
Muting or Unmuting a Conference Participant
If you are the organizer/moderator of a Yealink Cloud video conference, you can mute or unmute any conference
participant. And the muted participants cannot unmute themselves without your permission.
Procedure
1. On your CP960 conference phone, tap Members during a call.
The touch screen displays all participants.
2. Tap after the participant that you want to mute.
The participant is muted, and the icon changes to .
3. Tap after the participant that you want to unmute.
The participant is unmuted, and the icon changes to .
Leaving Conference
All participants can leave the conference at any time. Other participants remain connected.
•Leaving Conference using Remote Control
•Leaving Conference using CP960 Conference Phone
Leaving Conference using Remote Control
Procedure
Do one of the following according to your role:
•If you are a moderator (or organizer) of a Yealink Cloud video conference, press and selectLeave, others
keep going.
•If you are not a moderator (or organizer) of a Yealink Cloud video conference, press .
Leaving Conference using CP960 Conference Phone
Procedure
Do one of the following according to your role:
• If you are a moderator (or organizer) of a Yealink Cloud video conference, tapEnd Call > Leave, others keep
going.
• If you are not a moderator (or organizer) of a Yealink Cloud video conference, tapEnd Call.
Ending Conference
If you are the organizer/moderator of a Yealink Cloud video conference, you can end the conference, all participants
leave the conference.
•Ending Conference using Remote Control
•Ending Conference using CP960 Conference Phone
Ending Conference using Remote Control
Procedure
1. On your remote control, press .
2. Select End conference.
| Using the Yealink Meeting Server | 46
Ending Conference using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap EndCall.
2. Tap End conference.
Using the Yealink Meeting Server
You can dial other YMS accounts or initiate a YMS video conference.
About this task
There are three types of YMS video conference:
•Scheduled conference: You should schedule the conference using the Yealink Meeting Server or Microsoft
Outlook software.
•Meet Now: You can initiate a meet now conference at any time, without a reservation.
•Permanent Virtual Meeting Room: The permanent VMR is created by your enterprise administrator. You can
join the permanent VMR at any time without a reservation.
With the YMS video conferencing feature, you can do the following:
• View and join scheduled conferences.
• Initiate and join meet now conferences.
• Join the permanent VMR.
• Manage YMS video conferences.
Note: If more than one endpoint registered the same YMS account join the same conference, the former
endpoint which joined the conference will leave the conference automatically. The conference only allows
one of them to join the conference.
•Dialing YMS Accounts
•Scheduled Conference
•Meet Now
•Permanent Virtual Meeting Room
•Managing Video Conference
Dialing YMS Accounts
You can dial other YMS accounts.
Related information
Placing a Call by Entering a Number
Scheduled Conference
•Viewing Scheduled Conferences
•Joining a Scheduled Conference from a Conference Reminder
•Joining a Scheduled Conference from a Conference Invitation
•Joining a Scheduled Conference from a Conference Schedule
•Joining a Scheduled Conference from the Notification Center
| Using the Yealink Meeting Server | 47
•Dialing into a Scheduled YMS Conference
•Watching Live Broadcast
Viewing Scheduled Conferences
You can schedule a conference using the Yealink Meeting Server or Microsoft Outlook software. The scheduled
conference will be added to all invitees’ video conferencing system. And invitee whose YMS account is associated
with an email address, will receive an email about how to join the conference.
Procedure
On your monitor or CP960 conference phone, do one of the followings:
• On the idle screen, view the upcoming or ongoing conference schedules for today.
• On the idle screen, select the upcoming or ongoing conference schedules for today to see schedule list. Your
ongoing conferences and upcoming conferences are listed for the latest month.
Joining a Scheduled Conference from a Conference Reminder
A reminder pop-up is displayed 5 minutes before the conference starts. The reminder shows the main information of
the schedule, including subject, date & time and organizer.
Procedure
On your remote control or CP960 conference phone, do one of the following:
• Select Join to join the scheduled conference.
• Select Detail to view conference details.
• Select Ignore to remove the reminder from the screen and stop all future reminders for this schedule.
Note: When the system is in a call, the conference reminder will not pop up. If the call ends and the
scheduled conference is still ongoing, the reminder will pop up. But if the scheduled conference ends, the
reminder will not pop up.
Joining a Scheduled Conference from a Conference Invitation
When the scheduled conference begins, your system will receive a call that invites you to join the conference.
Before you begin
Conference invitation is available only if the enterprise administrator enables the automatic dialing feature on the
Yealink Meeting Server. For more information, refer to Yealink Meeting Server Administrator Guide.
Procedure
Do one of the following when you receive a conference invitation:
• If you enable auto answer feature, your system will join the scheduled conference automatically once it
receives a conference invitation.
• If you disable auto answer feature, use your remote control or CP960 conference phone to answer the
conference invitation.
Related information
Answering Calls
Joining a Scheduled Conference from a Conference Schedule
By default, you can join a scheduled conference that is about to take place in 5 minutes or less. The enterprise
administrator can configure when participants can join the scheduled conference.
| Using the Yealink Meeting Server | 48
Procedure
1. On your remote control or CP960 conference phone, navigate to Schedule ( ).
Your ongoing conferences and upcoming conferences are listed for the latest month.
2. Select the desired conference.
3. When the conference is about to take place in 5 minutes or less, select Join.
Joining a Scheduled Conference from the Notification Center
By default, when the conference is about to take place in 5 minutes, the status bar of CP960 conference phone
displays the icon and the notification center displays the conference information.
Procedure
1. On your CP960 conference phone, swipe down from the top of the screen to enter the notification center.
2. Tap the desired conference notification to join the conference.
Dialing into a Scheduled YMS Conference
About this task
If you schedule a conference or you are invited to a scheduled conference, you can obtain the conference information
in following ways:
• Invitee will receive an email, which includes the IP address, conference ID and conference password.
• Your system and CP960 conference phone will display conference information, which includes the conference ID
and conference password.
• Contact the conference participants.
Procedure
Do one of the following:
• If you register a YMS account, dial theconference ID to join the conference.
• If you do not register a YMS account, dial the server address to join the conference.
• To join from a SIP device, dial conference ID** conference password@ server address or server
address##conference ID** conference password to join the conference.
• To join from a H.323 device, dial server address ##conference ID**conference password to join the
conference.
Watching Live Broadcast
Some video conferences, such as lectures or training, have large audiences. The cost is high if all audiences join the
video conferences. In this situation, the audiences who do not need to join the video conferences can choose to watch
the live broadcast.
Before you begin
The conference organizer enables the RTMP live feature when scheduling a conference. The QR code will be added
to all invitees’ video conferencing system. And invitee whose YMS account is associated with an email address, will
receive an email includes the QR code and a link.
Procedure
Do one of the following to watch live broadcast：
| Using the Yealink Meeting Server | 49
•Use your remote control or CP960 conference phone to select Schedule（ ）, and use mobile devices to
scan QR code to watch live broadcast.
• In the received email, clickClick here to watch live broadcastor scan QR code to watch live broadcast.
Meet Now
When you register a YMS account, you can initiate a meet now conference at any time, without a reservation.
•Initiating a Meet Now Conference
•Dialing to Join a Meet Now Conference
Initiating a Meet Now Conference
Procedure
Do one of the following:
• On your remote control, navigate to Meet Now.
• On your CP960 conference phone, tap Meet Now.
Note: In meet now conference, if you receive a call from a YMS contact, a reminder will prompt that you
can allow or refuse the contact to join your conference.
Dialing to Join a Meet Now Conference
You can dial to join a meet now conference that is initiated by others. And you can obtain the conference information
from the conference participants.
Procedure
Do one of the following:
• If you register a YMS account, dial the conference ID to join the conference.
• To join from a SIP device, dial conference ID** @ IP address of server or IP address of
server##conference ID to join the conference.
• To join from a H.323 device, dialIP address of server ##conference ID to join the conference.
Permanent Virtual Meeting Room
You can join a permanent VMR at any time, without a reservation. The permanent VMR can be configured via the
Yealink Meeting Server only. For more information, refer to Yealink Meeting Server User Guide.
•Joining a Permanent VMR from Directory
•Dialing into a Permanent Virtual Meeting Room
Joining a Permanent VMR from Directory
Make sure that your enterprise administrator has synchronized the permanent VMR to your system via the Yealink
Meeting Server. So that your enterprise directory can display the permanent VMR.
•Joining a Permanent VMR using Remote Control
•Joing a Permanent VMR using CP960 Conference Phone
Joining a Permanent VMR using Remote Control
| Using the Yealink Meeting Server | 50
Procedure
1. On your remote control, navigate to Dial > Directory.
2. Select Cloud from the pull-down list of the All Contacts.
3. Select Virtual Meeting Room and then press OK key.
4. Select the desired permanent VMR, and then pressOK key to place a video call.
If you want to place a voice call, press the right key to select Voice Call.
Joing a Permanent VMR using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Directory.
2. Tap the All Contacts field.
3. Tap Cloud in the pop-up dialog box.
4. Tap Virtual Meeting Room.
5. Tap the desired permanent VMR to place a video call.
If you want to place a voice call, tap after the desired permanent VMR and then taoVoice Call.
Dialing into a Permanent Virtual Meeting Room
You can dial into a meet now conference that is initiated by others. And you can obtain the conference information
from the conference participants.
Procedure
1. If you register a YMS account, dial the conference ID to join the permanent VMR.
2. If you do not register a YMS account and the permanent VMR requires no password:
• To join from a SIP device, dial conference ID**@IP address of the server or IP address of the server
##conference ID to join the permanent VMR.
• To join from a H.323 device, dial IP address of the server ##conference ID to join the permanent VMR.
3. If you do not register a YMS account and the permanent VMR requires a password:
• To join from a SIP device, dial conference ID** conference password@ IP address of server or IP address of
the server ##conference ID**conference password to join the permanent VMR.
• To join from a H.323 device, dial IP address of the server ##conference ID**conference password to join the
permanent VMR.
Managing Video Conference
The following introduces how to manage YMS video conference. The YMS video conferences include scheduled
conferences, meet now conferences and permanent Virtual Meeting Room (VMR).
•Appointing Yourself to be a Lecturer
•Applying for Speaking
•Processing the Application
•Inviting Conference Participants
•Removing Conference Participants
•Muting or Unmuting All Conference Participants
•Muting or Unmuting a Conference Participant
•Leaving Conference
•Ending Conference
| Using the Yealink Meeting Server | 51
Appointing Yourself to be a Lecturer
There are two modes for scheduled conferences and permanent VMR: Discussion mode and Training mode. The
conference mode can be configured by on the Yealink Meeting Server only.
About this task
• In Discussion mode conference, participants can speak freely.
• In Training mode conference, all guests need to wait for the moderator to appoint lecturers.
Procedure
1. On your CP960 conference phone, tap More > Begin Speaking during a conference.
2. To finish speaking, tap More > Finish Speaking.
Applying for Speaking
If you are a guest, and you want to speak, you should apply for speaking. Only when the moderator allows the
application, can you speak freely.
Before you begin
In Training mode conference, all guests are muted automatically except the moderator (or the organizer). And muted
participants’ monitor prompts: “Please press to apply for speaking” in first 30 seconds.
Procedure
When you enter the Training mode conference, do one of the following to apply for speaking:
•On your remote control, press .
• On your CP960’s touch screen, tap Applying.
• On your CP960 conference phone, tap the mute key.
• On your CPW90 wireless microphones, tap the mute key.
• On your CPW90-BT bluetooth wireless microphones, tap the mute key.
• On your CPE90 wired expansion microphones, tap the mute key.
Processing the Application
If you are the moderator (or an organizer) of a Training mode conference, you can allow or refuse the applicant to
speak.
Procedure
On your CP960 conference phone, do one of the following:
• Tap Allow to allow the applicant to speak.
• Tap Members during a call.
•Tap to allow the applicant to speak or tap Clear handup to clear all requests.
Inviting Conference Participants
During the YMS video conference, you can invite other YMS contacts to join the conference.
•Inviting Conference Participants using Remote Control
•Inviting Conference Participants using CP960 Conference Phone
Inviting Conference Participants using Remote Control
| Using the Yealink Meeting Server | 52
Procedure
1. On your remote control, press or OK key to open Talk Menu.
2. Select Invite and then press Ok key.
3. Do one of the following:
• If you select Dial, enter a YMS account, and then dial out.
• If you select Group Dial, select the desired department and check the desired YMS contacts’ checkboxes, and
then select Start conference call.
4. Repeat above steps until all participants are added.
Inviting Conference Participants using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tapInvite.
2. Do one of the following:
•If you tap , select the desired department and tap the desired YMS contacts, and then tap to dial out.
•If you tap , enter a YMS account, and then tap Add Members. Repeat this step to add more members, and
then tap to dial out.
Removing Conference Participants
You can remove conference participants when you are the organizer/moderator of a YMS video conference.
•Removing Conference Participants using Remote Control
•Removing Conference Participants using CP960 Conference Phone
Removing Conference Participants using Remote Control
Procedure
1. On your remote control, press or OK key to open Talk Menu during a call.
2. Select Remove and then press the right key.
3. Select a member that you want to remove, and then press OK key.
Removing Conference Participants using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tapMembers during a call.
The touch screen displays all participants.
2. Tap after the participant that you want to remove.
Muting or Unmuting All Conference Participants
If you are the organizer/moderator of a YMS video conference, you can mute or unmute all conference participants
except for yourself. And the muted participants cannot unmute themselves without your permission.
Procedure
1. On your CP960 conference phone, tap Members during a call.
The touch screen displays all participants.
| Using the Yealink Meeting Server | 53
2. Tap All mute or All unmute to mute/unmute all participants.
Muting or Unmuting a Conference Participant
If you are the organizer/moderator of a YMS video conference, you can mute or unmute any conference participant.
And the muted participants cannot unmute themselves without your permission.
Procedure
1. On your CP960 conference phone, tap Members during a call.
The touch screen displays all participants.
2. Tap after the participant that you want to mute.
The participant is muted, and the icon changes to .
3. Tap after the participant that you want to unmute.
The participant is unmuted, and the icon changes to .
Leaving Conference
All participants can leave the conference at any time. Other participants remain connected.
•Leaving Conference using Remote Control
•Leaving Conference using CP960 Conference Phone
Leaving Conference using Remote Control
Procedure
Do one of the following according to your role:
•If you are a moderator (or organizer) of a YMS video conference, press and selectLeave, others keep
going.
•If you are not a moderator (or organizer) of a YMS video conference, press .
Leaving Conference using CP960 Conference Phone
Procedure
Do one of the following according to your role:
• If you are a moderator (or organizer) of a YMS video conference, tapEnd Call > Leave, others keep going.
• If you are not a moderator (or organizer) of a YMS video conference, tapEnd Call.
Ending Conference
If you are the organizer/moderator of a YMS video conference, you can end the conference, all participants leave the
conference.
•Ending Conference using Remote Control
•Ending Conference using CP960 Conference Phone
Ending Conference using Remote Control
Procedure
1. On your remote control, press .
| Using the Third-party Video Conference Platforms | 54
2. Select End conference.
Ending Conference using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap EndCall.
2. Tap End conference.
Using the Third-party Video Conference Platforms
About this task
Yealink video conferencing systems are compatible with StarLeaf/Zoom/BlueJeans/Pexip video conference platform.
• If you log into the Zoom/BlueJeans video conference platform, you can call the meeting ID to join the Virtual
Meeting Room.
• If you register a Starleaf/Pexip account, you can call the otheraccount to establish a point to point call or call the
meeting ID to join the Virtual Meeting Room.
Related information
Placing a Call by Entering a Number
Using Basic Features
•Viewing World Time
•Sharing Content
•Recording Video
•Screenshot
Viewing World Time
You can view current time of different cities in the world.
Procedure
1. On your CP960 conference phone, tap the digital clock.
The touch screen displays current time in selected cities.
2. Tap .
3. Do one of the following:
a) Tap , enter a few or all characters of the city in the Search field.
Cities match the characters will appear on the touch screen.
b) Tap , tap Sort by name or Sort by time.
The unselected cities will be sorted by the desired method.
4. Tap the desired cities to check or uncheck.
| Using Basic Features | 55
5. Tap to return to see current time of the selected cities..
Sharing Content
The system can show people and content at the same time. We recommend using dual screen for sharing contents.
Only one content can be shared at a time. Content shared later will replace the previous one.
•Wired Sharing
•Wireless Sharing
Related information
Changing the Video Input Source
Wired Sharing
If you purchase a VCH50 video conferencing hub for sharing content, connect the computer according to the quick
start guide in your package.
•Sharing Content When not in a Call
•Stopping Sharing Content When not in a Call
•Sharing Content during a Call
•Stopping Sharing Content during a Call
Related information
Changing the Video Input Source
Sharing Content When not in a Call
You can share content from a computer when your system is idle.
Procedure
Make sure the computer is powered on and connects to your system. The system will start sharing content
automatically. If the system does not start sharing content automatically, do one of the following to start sharing
content manually:
•On your remote control, if is set to Presentationkey by your system administrator, press to start
sharing content.
• On your CP960 conference phone, tap Presentationto start sharing content.
Stopping Sharing Content When not in a Call
Procedure
Do one of the following to stop sharing content when your system is idle.
• Disconnect the computer from your system.
•On your remote control, if is set to Presentation key by your system administrator, press to start
sharing content.
• On your CP960 conference phone, tap Presentation to stop sharing content.
Sharing Content during a Call
You can share content from a computer when your system is during a call.
| Using Basic Features | 56
Procedure
Make sure the computer is powered on and connects to your system. The system will start sharing content
automatically. If the system does not start sharing content automatically, do one of the following to start sharing
content manually.
•On your remote control, if is set to Presentation key by your system administrator, press to start
sharing content.
•On your remote control, press or OK key to open Talk Menu,and then select Presentation.
• On your CP960 conference phone, tap Presentation to start sharing content.
Stopping Sharing Content during a Call
Procedure
Do one of the following to stop sharing content when your system is during a call.
• Disconnect the computer from your system.
•On your remote control, if is set to Presentation key by your system administrator, press to start
sharing content.
•On your remote control, press or OK key to open Talk Menu,and then select Presentation.
• On your CP960 conference phone, tap Presentation to stop sharing content.
Wireless Sharing
If you purchase a WPP20 wireless presentation pod for sharing content, connect the computer according to the quick
start guide in your package. For more information, refer to Yealink WPP20 Wireless Presentation Pod User Guide.
•Sharing Content
•Stopping Sharing Content
Related information
Changing the Video Input Source
Sharing Content
Before you begin
Make sure the computer is powered on and you connect the WPP20 wireless presentation pod to your computer.
Procedure
Do one of the following:
• On the WPP20, press the presentation button to share full screen.
• On the WPP20, long press the presentation button for 3 seconds and then release this button. Choose the file or
window you want to share and then click Share Now.
• On the Yealink Wireless Presention Pod software, click Contents Share and choose the file you want to share,
and then click Share Now.
Stopping Sharing Content
Procedure
Do one of the following:
• On your computer, remove WPP20.
• On the WPP20, press the presentation button.
| Using Basic Features | 57
• On the Yealink Wireless Presention Pod software, click Stop Sharing.
Recording Video
You can record videos to system memory (only applicable to VC200), a USB flash drive or your computer.The
recorded video will be saved in .mkv format and named as the recorded time and date.
About this task
Note: To record videos to your computer, you need to purchase a WPP20 wireless presentation pod. For
more information, refer to Yealink WPP20 Wireless Presentation Pod User Guide.To record videos to your
computer, you need to connect a USB storage device to your system.
•Starting or Stopping Recording Videos
•Viewing Recorded Videos
•Copying Video from Local Storage to USB Storage
•Deleting Recorded Videos
Starting or Stopping Recording Videos
You can record videos using remore control or CP960 conference phone.
About this task
Your system should meet the following requirements:
Condition VC880/VC800/VC500 VC200
A USB flash drive is
connected
Must satisfy this condition • If you choose USB storage, you must
satisfy this condition.
• If you choose local storage, you do not
need to satisfy this condition.
Recording feature is enabled
( It is configured by your
system administrator)
Must satisfy this condition. Must satisfy this condition.
USB feature is enabled ( It is
configured by your system
administrator)
Must satisfy this condition. • If you choose USB storage, you must
satisfy this condition.
• If you choose local storage, you do not
need to satisfy this condition.
Local storage feature is
enabled ( It is configured by
your system administrator)
Must satisfy this condition. • If you choose local storage, you must
satisfy this condition.
• If you choose USB storage, you do not
need to satisfy this condition.
Storage space is enough Must satisfy this condition.
Navigate to More->Record-
>Storage Info to view USB
storage space using your remote
control.
Must satisfy this condition. Navigate to
More->File Manager to view storage
space using your remote control.
•Starting or Stopping Recording Videos using Remote Control
•Starting or Stopping Recording Videos using CP960 Conference Phone
Starting or Stopping Recording Videos using Remote Control
| Using Basic Features | 58
Procedure
1. On your remote control, press to start recording.
The monitor shows and the recording time.
2. Press again to stop recording.
Starting or Stopping Recording Videos using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Start Rec to start recording.
The touch screen prompts “Recording”.
2. Tap Stop Rec to stop recording.
Viewing Recorded Videos
You can view recorded videos via the remote control or a computer.
Procedure
1. For VC880/VC800/VC500 video conferencing system: On your remote control, navigate to More > Record >
Video.
For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storage or USB flash driver > Video.
2. Select a desired video,and then press the right key to select .
3. Do one of the following:
•Select to pause, and select to continue playing video.
• To skip forward the video, press the right key. Press once to skip forward 4 seconds.
• To rewind the video, press the left key. Press once to rewind 4 seconds.
•To adjust the volume of the speakerphone, press or .
•Select to stop playing video.
• You can also press on the remote control to stop playing video.
Note: If you receive an incoming call while you are playing video, the system will stop playing video
automatically.
Copying Video from Local Storage to USB Storage
For VC200 endpoint, you can copy the recorded videos from local storage to USB flash drive.
Procedure
1. For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storage > Video.
2. Select a desired video, and then press the right key to select .
Deleting Recorded Videos
You can delete the recorded videos when you need additional space on your USB flash drive.
| Using Basic Features | 59
Procedure
1. For VC880/VC800/VC500 video conferencing system: On your remote control, navigate to More > Record >
Video.
For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storage or USB Storage > Video.
2. Select a desired video, and then press the right key to select .
The monitor prompts “Delete this video?”
3. Select OK to delete the selected video.
Screenshot
You can capture screenshot and save it onto a USB storage device connected to your system. The screenshots are
saved as .jpg files and named as the captured time and date.
About this task
To record videos to your computer, you need to connect a USB storage device to your system.
•Capturing Screenshots
•Viewing Screenshots
•Copying Screenshot from Local Storage to USB Storage
•Deleing Screenshots
Capturing Screenshots
You can user remote control to capture screenshots when the system is idle. You can user remote control or CP960
conference phone to capture screenshots when the system is during a call.
About this task
Your system should meet the following requirements:
Condition VC880/VC800/VC500 VC200
A USB flash drive is
connected
Must satisfy this condition • If you choose USB storage, you must
satisfy this condition.
• If you choose local storage, you do not
need to satisfy this condition.
Screenshot feature is enabled
( It is configured by your
system administrator)
Must satisfy this condition. Must satisfy this condition.
USB feature is enabled ( It is
configured by your system
administrator)
Must satisfy this condition. • If you choose USB storage, you must
satisfy this condition.
• If you choose local storage, you do not
need to satisfy this condition.
Local storage feature is
enabled ( It is configured by
your system administrator)
Must satisfy this condition. • If you choose local storage, you must
satisfy this condition.
• If you choose USB storage, you do not
need to satisfy this condition.
| Using Basic Features | 60
Condition VC880/VC800/VC500 VC200
Storage space is enough Must satisfy this condition.
Navigate to More->Record-
>Storage Info to view USB
storage space using your remote
control.
Must satisfy this condition. Navigate to
More->File Mnager to view storage space
using your remote control.
•Capturing Screenshots using Remote Control
•Capturing Screenshots using CP960 Conference Phone
Capturing Screenshots using Remote Control
Procedure
On your remote control, if is set to Screenshot key by your system administrator, press to capture
screenshot.
Capturing Screenshots using CP960 Conference Phone
Procedure
On your CP960 conference phone, tap More > Screenshotduring a call.
Viewing Screenshots
You can view the captured screenshots via the remote control or a computer.
Procedure
1. For VC880/VC800/VC500 video conferencing system: On your remote control, navigate to More > Record >
Screenshot.
For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storage or USB flash driver > Screenshot.
2. Select a desired screenshot, and then press the right key to select .
3. Do one of the following:
• - Press the left key or right key to view the previous or next screenshot.
•- Press or to zoom screenshot in/out.
•- Select to exit.
•- You can also press to exit.
Copying Screenshot from Local Storage to USB Storage
For VC200 endpoint, you can copy the screenshot from local storage to USB flash drive.
Procedure
1. For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storage > Screenshot.
2. Select a desired screenshot, and then press the right key to select .
| Settings | 61
Deleing Screenshots
You can delete screenshots when you need additional space on your USB drive.
Procedure
1. For VC880/VC800/VC500 video conferencing system: On your remote control, navigate to More > Record >
Screenshot.
For VC200 video conferencing endpoint: On your remote control, navigate to More > File Manager > Local
Storageor USB flash driver > Screenshot.
2. Select a desired screenshot, and then press the right key to select .
The monitor prompts ”Delete this screenshot?”.
3. Select OK to delete the selected screenshot.
Settings
•Configuring Audio Settings
•Configuring Video Settings
•Configuring Camera Settings
Configuring Audio Settings
You can configure audio settings on the system.
•Adjusting the Volume
•Configuring the Key Tone
•Enabling Silent Mode
•Muting Microphone
Adjusting the Volume
About this task
You can adjust the following volume level:
•Ringer volume: adjust the ringer volume when the phone is idle or ringing.
•Talking volume: adjust the volume of speakerphone when the system is in use.
•Key tone volume:
• Adjust the key tone volume when pressing the key on the remote control.
• Adjust the key tone volume of the CP960 conference phone when tapping onscreen dial pad on the dialing
screen.
•Media Volume: adjust the media volume when playing recorded videos.
Procedure
Do one of the following:
• On your remote control, press volume key to adjust the volume.
• On your CP960 conference phone, tap volume key or drag the volume slider to adjust the volume.
Note: You can still use CP960 conference phone to adjust the system volume even if it is not the active
audio device of the system.
| Settings | 62
Related tasks
Configuring the Key Tone
Configuring the Key Tone
You can enable the key tone feature to produce a sound when you press any key on the remote control or tap the
onscreen dial pad on the CP960 conference phone.
Procedure
1. On your remote control, navigate to More > Setting > Basic.
2. Select the Key Tone checkbox.
3. Press to exit.
Enabling Silent Mode
If you turn on silent mode, your system makes no sound.
•Enabling Silent Mode using Remote Control
•Enabling Silent Mode using CP960 Conference Phone
Enabling Silent Mode using Remote Control
Procedure
On your remote control, do one of the following:
• Long press Vol- key to decrease the ringer volume to minimum.
•If is set to Mute Speakerkey by your system administrator, press to turn on the silent mode.
Note: When the silent mode is on, the icon will appear on the monitor.
Enabling Silent Mode using CP960 Conference Phone
Procedure
On your CP960 conference phone, do one of the following:
• Long tap the left volume touch key to decrease the ringer volume to minimum.
• Swipe down from the top of the screen to enter the control center and toggleSilent on.
Note: When the silent mode is on, the icon will appear on the CP960’s touch screen.
Muting Microphone
You can mute the local microphone during a call, so that other parties cannot hear you.
Procedure
Do one of the following:
•On your remote control, press .
•On your CP960 conference phone, tap .
• On your CP960 conference phone’s touch screen, tap Mute.
•On your CPW90 wireless microphones, tap .
| Settings | 63
•On your CPW90-BT bluetooth wireless microphones, tap .
•On your CPE90 wired expansion microphones, tap .
If video conferencing system is muted, the icon will appear on the local video.
Configuring Video Settings
You can configure video settings on the system.
•Maximizing Monitor Video Display
•Allowing Website Snapshot
•Changing the Video Input Source
•Screen Layout
Maximizing Monitor Video Display
You monitor may not display the entire HD image. To solve this problem, you can adjust the monitor to display entire
HD image manually.
Procedure
1. On your remote control, navigate to More > Setiting > Basic > Display.
2. Use left or right key to adjust the Display(90%-100%) slider.
3. Select Save and then press OK key to accept the change.
Allowing Website Snapshot
You can choose whether to allow the web to show the content that is displayed on your monitor. If you want to
prevent content on your monitor from being viewed remotely, you can disable this feature.
Procedure
1. On your remote control, navigate to More > Setiting > Basic.
2. Check the Website Snapshot checkbox.
3. Press to return to the idle screen.
Changing the Video Input Source
Your system supports camera and PC video input sources.
•Changing the Video Input Source When not in a Call
•Changing the Video Input Source during a Call
Related tasks
Sharing Content
Changing the Video Input Source When not in a Call
Before you begin
To use PC input source, make sure that your system connects a PC.
| Settings | 64
Procedure
1. On your remote control, if is set to Input key by your system administrator, press to set the video input
source.
The monitor shows Camera and PC input sources.
2. Select the desired input source, and then press OK key.
The monitor shows the selected source.
Changing the Video Input Source during a Call
Before you begin
To use PC input source, make sure that your system connects a PC.
Procedure
1. On your remote control, do one of the following:
•if is set to Input key by your system administrator, press to set the video input source.
•Press or OK key to open Talk Menu, and then select Input Choose.
The monitor shows Camera, Camera +PC and PC input sources.
2. Select the desired input source, and then press OK key.
• If you select PC, the remote video image is shown in big size, and the PC content is shown in small size
(Picture-in-Picture).
• If you select Camera+PC, the PC content is shown in big size, and other video images are shown in small
size.
• If you select Camera, the remote video image is shown in big size, and the local video image is shown in
small size (Picture-in-Picture).
3. Press to return.
Screen Layout
The screen layout depends on the number of connected callers, whether a single display or a dual display is used, and
whether a presentation is being viewed.
•Available Screen Layouts
•Changing Screen Layout
•Single Display Screen Layouts
•Dual Display Screen Layouts
•Specifying Content to the Secondary Monitor
Available Screen Layouts
Screen layouts appear as one of the following types:
•OnePlusN ( / ): In this layout, the assigned participant is given prominence in the largest pane
regardless of who is currently speaking. Other participants are displayed in a strip beside the assigned speaker.
•Selected Speaker ( / ): In this layout, only the selected speaker is seen in a large pane.
•Equal N×N ( / ) : In this layout, every participant is given equal prominence in equal-sized panes.
•Picture-in-Picture ( / ): During two-way video calls, one participant is shown in full screen, while the
other participant is shown in the PIP (Picture-in-Picture).
| Settings | 65
•Speaker View ( / ): For VC800 system: during multi-way video calls, the active speaker is given
prominence in the largest pane. Other participants are displayed in a strip beside the active speaker. Speaker view
is not applicable to VC500 endpoint.
Changing Screen Layout
You can change screen layouts during a call using using the remote control or CP960 conference phone.
Procedure
1. Do one of the followings during a call:
2. On your remote control, press .
3. Press or OK key to open Talk Menu, and then select Layout.
4. On your CP960 conference phone, tapLayout.
5. Select the desired layout, and then press OK key.
Single Display Screen Layouts
The following introduce the default layout when you connect one display screen.
Two-way Video Calls
Picture-in-picture layout is used by default.
Two-way Video Call with a Presentation
The PC content is given prominence in the largest pane. Other participants are displayed beside the PC content.
Multi-way Video Calls
The following takes four-way video calls as an example. Voice activation layout is used by default.
The active speaker is given prominence in the largest pane. Other participants are displayed in a strip beside the active
speaker.
| Settings | 66
Multi-way Video Calls with a Presentation
The following takes four-way video calls as an example. Voice activation layout is used by default.
The PC content is given prominence in the largest pane. Other participants are displayed in a strip beside the PC
content. The speaker is fixed at the bottom-left corner.
Note: Multi-way video calls are only applicable to VC800 system that has a multipoint license.
Dual Display Screen Layouts
The following introduce the default layout when you connect two display screens.
Two-way Video Calls
Two-way Video Call with a Presentation
The PC content is given prominence in the largest pane. Other participants are displayed beside the PC content.
Multi-way Video Calls
The following takes four-way video calls as an example. Voice activation layout is used by default.
| Settings | 67
•Primary monitor: The active speaker is given prominence in the largest pane. Other participants are displayed in
a strip beside the active speaker.
•Secondary monitor: local image is seen in a large pane.
Multi-way Video Calls with a Presentation
The following takes four-way video calls as an example. Voice activation layout is used by default.
•Primary monitor: The active speaker is given prominence in the largest pane. Other participants are displayed in
a strip beside the active speaker.
•Secondary monitor: PC content is seen in a large pane.
Note: Multi-way video calls are only applicable to VC800 system that has a multipoint license.
Specifying Content to the Secondary Monitor
When you connect dual display screen, you can use the default layout, or specify the content to the secondary
monitor.
Procedure
1. On your remote control, press or OK key to open Talk Menu during a call.
2. Select Focus (Display2) and then press the right key.
3. Select the desired content, and then press OK key.
The secondary monitor displays the selected content. The icon is displayed on the focus content. After
reassigning the content, the PC content on the second monitor will automatically be displayed on the primary
monitor.
Configuring Camera Settings
You can configure camera settings on the system.
•Adjusting Cameras
•Allowing the Far-End System to Control Your Camera
•Setting Camera Presets
| Settings | 68
Adjusting Cameras
You can pan, tilt and zoom your own camera or far-end camera.
•Adjusting Cameras using Remote Control When not in a Call
•Adjusing Cameras using Remote Control during a Call
•Adjusing Cameras using CP960 Conference Phone during a Call
Related tasks
Allowing the Far-End System to Control Your Camera
Controlling the Multiple Remote Cameras
Adjusting Cameras using Remote Control When not in a Call
Procedure
1. On your remote control, select local video and then press OK.
2. Press the navigation buttons to move the camera up, down, left, or right.
3. Press or to zoom out or to zoom in.
Adjusting Cameras using Remote Control When not in a Call
Procedure
1. On your remote control, select local video and then press OK.
2. Press the navigation buttons to move the camera up, down, left, or right.
3. Press or to zoom out or to zoom in.
Adjusing Cameras using Remote Control during a Call
Procedure
1. During a call, on your remote control, press or OK key to open Talk Menu .
2. SelectmeNear/Far Camera and then press the right key to select the desired camera.
3. Press the navigation buttons to move the camera up, down, left, or right.
4. Press or to zoom out or to zoom in.
Adjusing Cameras using CP960 Conference Phone during a Call
Procedure
1. During a call, on your CP960 conference phone, tap More > Camera.
2. Tap The current control camera.
3. Tap the desired camera.
4. Press the navigation buttons to move the camera up, down, left, or right.
5. Press or to zoom out or to zoom in.
Allowing the Far-End System to Control Your Camera
You can allow the far-end system to control your camera.
| Settings | 69
Procedure
1. On your remote control, navigate to More > Setting > Video & Audio.
2. Check the Control Near Camera checkbox.
3. Press to return to the idle screen.
Related tasks
Adjusting Cameras
Setting Camera Presets
Camera presets store camera pan, tilt, and zoom settings. Camera presets help you quickly point a camera at pre-
defined locations. Camera presets remain in effect until you change them.
•Storing a Camera Preset
•Selecting a Stored Preset
•Updating the Stored Preset
•Editing the Stored Preset
•Placing a Preset at the Top
•Deleting the Stored Preset
•Clearing the Stored Preset
Storing a Camera Preset
You can store up to 100 preset camera positions for the local camera.
Procedure
1. On your remote control, do one of the following to enter the preset operation interface:
• Navigate toMore > Preset Location.
•Select local video image and press OK key, and then press .
2. Select New Preset, and then press OK key.
3. If you connect VCC22 video conferencing camera to your VC880/VC800 video conferencing system, select the
desired camera.
4. Press the navigation key to adjust the angle of the camera or press the zoom in/zoom out key to adjust the focus of
the camera.
5. Press OK key to store the camera preset.
Selecting a Stored Preset
You can quickly adjust the position of your camera to a previously stored preset.
Procedure
1. On your remote control, do one of the following:
• When the system is idle, enter the preset operation interface.
•When the system is during a call, press and select Preset Location to enter the preset operation interface.
2. Select a stored preset, and then press OK key to change the position of the camera.
You can also press the numeric keys (corresponding to 0 to 9 preset positions) on the remote control. But in this
way, you can only move local camera to 10 preset positions at most.
Related tasks
Storing a Camera Preset
Updating the Stored Preset
You can update the stored presets, which helps you decide where you want your camera to move.
| Settings | 70
Procedure
1. On your remote control, enter preset operation interface.
2. Select Update Preset and then press OK key.
All preview screens will be updated.
Related tasks
Storing a Camera Preset
Editing the Stored Preset
You can edit the stored presets to adjust camera angle and focus.
Procedure
1. On your remote control, enter preset operation interface.
2. Select Edit and then press OK key.
3. Select a preset, and then press OK key.
4. Press the navigation key to adjust the angle of the camera or press the zoom in/zoom out key to adjust the focus of
the camera.
5. Press OK key to store the camera preset.
Related tasks
Storing a Camera Preset
Placing a Preset at the Top
You can place a frequently used preset at the top.
Procedure
1. On your remote control, enter preset operation interface.
2. Select Stick and then press OK key.
3. Select a preset, and then press OK key.
Related tasks
Storing a Camera Preset
Deleting the Stored Preset
You can delete a stored preset.
Procedure
1. On your remote control, enter preset operation interface.
2. Select Delete and then press OK key.
3. Select the stored presets, and then press OK key.
4. SelectOKo clear all presets.
Related tasks
Storing a Camera Preset
Clearing the Stored Preset
You can clear all stored presets.
Procedure
1. On your remote control, enter preset operation interface.
2. Select Clear and then press OK key.
3. SelectOK to clear all presets.
| Accessories with Your System | 71
Related tasks
Storing a Camera Preset
Accessories with Your System
This section describes the accessories that you can use to work with your system.
•Supported Accessories
•Using the CPW90 Wireless Microphones
•Using the CPW90-BT Bluetooth Wireless Microphones
•Using the CPE90 Wired Expansion Microphones
•Using the WPP20 Wireless Presentation Pod
•Using the CPN10 PSTN Box
•Using the VCC22 Video Conferencing Camera
Supported Accessories
You can use your system with the following accessories.
• CPW90 Wireless Microphones
• CPW90-BT Bluetooth Wireless Microphones
• CPE90 Wired Expansion Microphones
• VCC22 Video Conferencing Camera
• WPP20 Wireless Presentation Pod
• CPN10 PSTN Box
Using the CPW90 Wireless Microphones
CPW90 wireless microphones can work as the audio input devices.
About this task
•If CPW90 wireless microphones work as the audio input devices of video conferencing system, refer to Yealink
CPW90 Wireless Microphones Quick Start Guidefor more information.
•If CPW90 wireless microphones work as the audio input devices of CP960 conference phone, refer to Yealink
CPW90 Quick Start Guidefor more information.
•Viewing CPW90 Information
•Working Frequency
Viewing CPW90 Information
CPW90 wireless microphones can work as the audio input devices.
About this task
• If CPW90 wireless microphones work as the audio input devices of video conferencing system, refer to
Yealink_CPW90_Wireless_Microphones_Quick_Start_Guide.
• If CPW90 wireless microphones work as the audio input devices of CP960 conference phone, refer to
Yealink_CPW90_Quick_Start_Guide.
•Viewing CPW90 Information using Remote Control
| Accessories with Your System | 72
•Viewing CPW90 Information using CP960 Conference Phone
Viewing CPW90 Information using Remote Control
Procedure
1. On your remote control, navigate toMore > Status > Wireless Microphone.
2. Select the desired wireless microphone to view details.
Viewing CPW90 Information using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Settings > Wireless Microphone.
2. Tap Detail to view details.
Working Frequency
For reference, the Frequency/Channels of CPW90 used in each Region are tabulated below:
RF Carrier Index (DECT tester Numbering)
Freq
(MHz) EU Taiwan US LA Korea Brazil Japan
1881.792 9 9
1883.520 8 8
1885.248 7 7
1886.976 6 6
1888.704 5 5
1890.432 4 4
1892.160 3 3
1893.888 2 2
1895.616 1 4(F1)
1897.344 0 3(F2)
1899.072 2(F3)
1900.800 1(F4)
1902.528 0(F5)
1904.256
1905.984
1907.712
1909.440
1911.168 4
1912.896 9 3
1914.624 8 2
1916.352 7 1
| Accessories with Your System | 73
RF Carrier Index (DECT tester Numbering)
Freq
(MHz) EU Taiwan US LA Korea Brazil Japan
1918.080 6 0
1919.808 5
1921.536 4 4
1923.264 3 3
1924.992 2 2
1926.720 1 1
1928.448 0 0
1787.616 8
1789.344 7
1791.072 6
Using the CPW90-BT Bluetooth Wireless Microphones
CPW90-BT bluetooth wireless microphones can work as the audio input devices of the video conferencing system.
For more information, refer to Yealink CPW90-BT Bluetooth Wireless Microphones Quick Start Guide.
•Viewing CPW90-BT Information using Remote Control
•Viewing CPW90-BT Information using CP960 Conference Phone
Viewing CPW90-BT Information using Remote Control
Procedure
1. On your remote control, navigate toMore > Status > Wireless Microphone.
2. Select the desired wireless microphone to view details.
Viewing CPW90-BT Information using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tap Settings > Wireless Microphone.
2. Tap Detail to view details.
Using the CPE90 Wired Expansion Microphones
This chapter provides basic operating instructions for the CPE90 wired expansion microphones.
•Placing the CPE90
•Muting or Unmuting the CPE90
Placing the CPE90
The CPE90 has a rubber pads on its base to prevent it from sliding. You can place the CPE90 on a stable surface and
keep it away from obstacles so that it can effectively pick up sounds.
| Accessories with Your System | 74
Procedure
Place the CPE90 according to the following picture:
Muting or Unmuting the CPE90
Procedure
Tap on the CPE90 to mute or unmute the microphone.
Using the WPP20 Wireless Presentation Pod
WPP20 wireless presentation pod enables you to share what’s on your laptop or mobile device quickly without cables.
For more information, refer to Yealink WPP20 Wireless Presentation Pod User Guide.
Using the CPN10 PSTN Box
PSTN box CPN10 is used to connect video conferencing system to the PSTN (Public Switched Telephone Network).
For more information on the connection, refer to Yealink PSTN Box CPN10 Quick Start Guide. If your system
connects to the PSTN successfully, up to two PSTN accounts can be registered. So that your system can establish
audio calls with PSTN user.
Using the VCC22 Video Conferencing Camera
You can connect up to 9 VCC22 video conferencing cameras to the VC880 video conferencing system. You can
connect up to 8 VCC22 video conferencing cameras to the VC800 video conferencing system. VCC22 video
conferencing camera is not applicable to VC500/VC200 video conferencing endpoint.
You should read the Yealink VCC22 Video Conferencing Camera Quick Start_Guide to know the package and
installation.
This chapter provides basic operating instructions for the VCC22 video conferencing camera.
•Controlling VCC22 Camera
•Adjusting Camera Layout
•Controlling the Multiple Remote Cameras
| Accessories with Your System | 75
•Layouts of Multiple Display Screens
•Resetting Camera
Controlling VCC22 Camera
When the system is idle, you can choose the desired camera to capture video images.
•Controlling VCC22 Camera using Remote Control
•Controlling VCC22 Camera using CP960 Conference Phone
Controlling VCC22 Camera using Remote Control
Procedure
1. On your remote control, press the right navigation key twice to enter the cameras list.
2. Select the desired camera and then press OK key.
3. Press the navigation key to adjust the angle of the camera.
4. Press or to adjust the focus of the camera.
Controlling VCC22 Camera using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tapCamera.
2. Tap The current control camera.
3. Tap the desired camera.
4. Tap to return.
5. Tap the navigation keys to adjust the angle of the camera.
6. Tap or to adjust the focus of the camera.
Adjusting Camera Layout
During a call, all video streams captured from the connected cameras are synthesized to one video stream, and then
sent to the far site.
Camera layouts appear as one of the following types:
•OnePlusN ( / ): the selected camera is given prominence in the largest pane. Other cameras are
displayed in small panes.
•Selected Speaker ( / ): the selected camera is seen in a large pane.
•Equal N×N ( / ) : every camera is given equal prominence in equal-sized panes.
•Adjusting Camera Layout using Remote Control
•Adjusting Camera Layout using CP960 Conference Phone
Adjusting Camera Layout using Remote Control
Procedure
1. On your remote control, press or OK keyto open Talk Menu.
2. Select Camera Layout and then press the right key.
3. Select the desired camera layout, press the right key.
| Accessories with Your System | 76
Adjusting Camera Layout using CP960 Conference Phone
Procedure
1. On your CP960 conference phone, tapCamera Layout.
2. Tap the desired camera layout.
Controlling the Multiple Remote Cameras
You can control the desired camera when far-end system connects multiple VCC22 video conferencing cameras.
Procedure
Do one the following:
• When camera layout of far-end system is OnePlusN, you can control the camera that displays the largest
video.
• When camera layout of far-end system is Selected Speaker, you can control the camera that displays full-
screen video.
• When camera layout of far-end system is Equal N×N and far site is VC800 system, you can control the
VC800 camera.
• When camera layout of far-end system is Equal N×N and far site is VC880 system, you can control the first
camera.
Related tasks
Adjusting Cameras
Layouts of Multiple Display Screens
If two monitors already connect to the VC880/VC800 codec, a third monitor can be connected to the HDMI OUT port
on the VCC22 video conferencing camera to diaplay shared content.
If VC800 video conferencing system only connects a monitor or no content is being shared to others, the display
screen connected to the VCC22 video conferencing camera shows a static image only.
Note: If VC880/VC800 codec only connects a monitor or no content is being shared to others, the display
screen connected to the VCC22 video conferencing camera only shows a static image.
Resetting Camera
Generally, some common issues may occur while using the camera. Your system administrator may ask you to reset
your camera.
Procedure
On your VCC22 video conferencing camera, using tiny objects (for example, the paper clip) to press and hold the
reset button for 15 seconds until the monitor prompts "Resetting to factory".
The VC800 video conferencing system, CP960 conference phone and VCC22 video conferencing camera are reset
synchronously.
| Accessories with Your System | 77
Note: Do not power off the system when resetting the factory settings