Table of Contents
- LTE3301 Series
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Routing
- Interface Group
- Firewall
- Content Filtering
- IPv6 Firewall
- Bandwidth Management
- Universal Plug-and-Play (UPnP)
- TR-069
- Maintenance
- Troubleshooting
- Pop-up Windows, JavaScript and Java Permissions
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Customer Support
- Index
Zyxel LTE 3301 User Manual
Displayed below is the user manual for LTE 3301 by Zyxel which is a product in the Cellular Network Devices category. This manual has pages.
Related Manuals
Quick Start Guide
www.zyxel.com
LTE3301 Series
LTE Indoor Gateway
Version 1.00
Edition 1, 06/2015
Copyright © 2015 ZyXEL Communications Corporation
User’s Guide
Default Login Details
LAN IP Address http://192.168.1.1
User Name admin
Password 1234
LTE3301 Series User’s Guide
2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
Screenshots and graphics in this book may differ slightly from your product due to differences in
your product firmware or your computer operating system. Every effort has been made to ensure
that the information in this manual is accurate.
Related Documentation
•Quick Start Guide
The Quick Start Guide shows how to connect the LTE3301 and access the Web Configurator
wizards. It contains information on setting up your network and configuring for Internet access.
Contents Overview
LTE3301 Series User’s Guide
3
Contents Overview
User’s Guide .................................... ................................................................ .......... .........................10
Introduction ............................................................................................................................................. 11
Introducing the Web Configurator ...........................................................................................................16
Setup Wizard ...........................................................................................................................................25
Tutorials ..................................................................................................................................................30
Technical Reference ..........................................................................................................................41
Monitor ....................................................................................................................................................42
WAN ........................................................................................................................................................49
Wireless LAN ..........................................................................................................................................61
LAN .........................................................................................................................................................81
DHCP Server ..........................................................................................................................................83
NAT .........................................................................................................................................................88
DDNS ......................................................................................................................................................97
Routing ....................................................................................................................................................99
Interface Group .....................................................................................................................................102
Firewall ..................................................................................................................................................104
Content Filtering ....................................................................................................................................109
IPv6 Firewall .......................................................................................................................................... 112
Bandwidth Management ....................................................................................................................... 114
Universal Plug-and-Play (UPnP) ........................................................................................................... 118
TR-069 ..................................................................................................................................................124
Maintenance ..........................................................................................................................................126
Troubleshooting ....................................................................................................................................134
Table of Contents
LTE3301 Series User’s Guide
4
Table of Contents
Contents Overview ..............................................................................................................................3
Table of Contents .................................................................................................................................4
Part I: User’s Guide .........................................................................................10
Chapter 1
Introduction.........................................................................................................................................11
1.1 Overview ........................................................................................................................................... 11
1.2 Applications ....................................................................................................................................... 11
1.3 Ways to Manage the LTE3301 ..........................................................................................................12
1.4 Good Habits for Managing the LTE3301 ...........................................................................................12
1.5 Resetting the LTE3301 ......................................................................................................................12
1.5.1 How to Use the RESET Button ................................................................................................12
1.6 The WPS Button ...............................................................................................................................12
1.7 SIM Card Slot ....................................................................................................................................13
1.8 LEDs .................................................................................................................................................13
1.9 Wall Mounting ...................................................................................................................................14
Chapter 2
Introducing the Web Configurator ....................................................................................................16
2.1 Overview ...........................................................................................................................................16
2.2 Accessing the Web Configurator .......................................................................................................16
2.2.1 Login Screen ...........................................................................................................................16
2.2.2 Password Screen ....................................................................................................................17
2.3 The Main Screen ...............................................................................................................................18
2.3.1 Title Bar ...................................................................................................................................19
2.3.2 Navigation Panel .....................................................................................................................19
2.4 Status Screen ....................................................................................................................................21
Chapter 3
Setup Wizard.......................................................................................................................................25
3.1 Overview ...........................................................................................................................................25
3.2 Accessing the Wizard ........................................................................................................................25
3.3 Wizard Setup .....................................................................................................................................25
Chapter 4
Tutorials...............................................................................................................................................30
Table of Contents
LTE3301 Series User’s Guide
5
4.1 Overview ...........................................................................................................................................30
4.2 Set Up a Wireless Network Using WPS ............................................................................................30
4.2.1 Push Button Configuration (PBC) ............................................................................................30
4.2.2 PIN Configuration ....................................................................................................................31
4.3 Connect to LTE3301 Wireless Network without WPS .......................................................................32
4.3.1 Configure Your Notebook ........................................................................................................34
4.4 Using Multiple SSIDs on the LTE3301 ..............................................................................................36
4.4.1 Configuring Security Settings of Multiple SSIDs ......................................................................37
Part II: Technical Reference............................................................................41
Chapter 5
Monitor.................................................................................................................................................42
5.1 Overview ...........................................................................................................................................42
5.2 What You Can Do .............................................................................................................................42
5.3 The Log Screen .................................................................................................................................42
5.3.1 View Log ..................................................................................................................................43
5.4 DHCP Table ...................................................................................................................................44
5.5 Packet Statistics .............................................................................................................................44
5.6 WLAN Station Status .....................................................................................................................45
5.7 LTE Modem Status ............................................................................................................................46
Chapter 6
WAN .....................................................................................................................................................49
6.1 Overview ...........................................................................................................................................49
6.2 What You Can Do .............................................................................................................................49
6.3 What You Need To Know ..................................................................................................................50
6.4 Management WAN ...........................................................................................................................52
6.4.1 Management WAN Edit ...........................................................................................................53
6.5 Network Scan ....................................................................................................................................56
6.6 IPv6 ...................................................................................................................................................58
Chapter 7
Wireless LAN.......................................................................................................................................61
7.1 Overview ...........................................................................................................................................61
7.1.1 What You Can Do ....................................................................................................................62
7.1.2 What You Should Know ...........................................................................................................62
7.2 General Wireless LAN Screen .........................................................................................................64
7.3 Wireless Security ..............................................................................................................................66
7.3.1 No Security ..............................................................................................................................66
7.3.2 WEP Encryption ......................................................................................................................67
Table of Contents
LTE3301 Series User’s Guide
6
7.3.3 WPA-PSK/WPA2-PSK .............................................................................................................69
7.3.4 WPA/WPA2 ..............................................................................................................................70
7.4 More AP Screen ................................................................................................................................71
7.4.1 More AP Edit ...........................................................................................................................72
7.5 MAC Filter Screen ............................................................................................................................73
7.6 Wireless LAN Advanced Screen .......................................................................................................75
7.7 Quality of Service (QoS) Screen .......................................................................................................76
7.8 WPS Screen ......................................................................................................................................76
7.9 WPS Station Screen ..........................................................................................................................78
7.10 Scheduling Screen ..........................................................................................................................78
7.11 WDS Screen ....................................................................................................................................79
Chapter 8
LAN ......................................................................................................................................................81
8.1 Overview ...........................................................................................................................................81
8.2 What You Can Do .............................................................................................................................81
8.3 What You Need To Know ..................................................................................................................81
8.4 LAN IP Screen ..................................................................................................................................82
Chapter 9
DHCP Server .......................................................................................................................................83
9.1 Overview ...........................................................................................................................................83
9.1.1 What You Can Do ....................................................................................................................83
9.1.2 What You Need To Know .........................................................................................................83
9.2 DHCP Server General Screen ..........................................................................................................83
9.3 DHCP Server Advanced Screen ....................................................................................................85
9.4 DHCP Client List Screen ...................................................................................................................87
Chapter 10
NAT.......................................................................................................................................................88
10.1 Overview ......................................................................................................................................88
10.1.1 What You Can Do ..................................................................................................................88
10.2 General Screen ...............................................................................................................................89
10.3 Port Forwarding Screen .................................................................................................................89
10.3.1 Port Forwarding Edit Screen ................................................................................................91
10.4 Port Trigger Screen .........................................................................................................................92
10.5 ALG Screen .....................................................................................................................................93
10.6 Technical Reference ........................................................................................................................94
10.6.1 NATPort Forwarding: Services and Port Numbers ................................................................94
10.6.2 NAT Port Forwarding Example ..............................................................................................95
10.6.3 Trigger Port Forwarding .........................................................................................................95
10.6.4 Trigger Port Forwarding Example ..........................................................................................95
10.6.5 Two Points To Remember About Trigger Ports .....................................................................96
Table of Contents
LTE3301 Series User’s Guide
7
Chapter 11
DDNS....................................................................................................................................................97
11.1 Overview ........................................................................................................................................97
11.2 General ..........................................................................................................................................97
Chapter 12
Routing ................................................................................................................................................99
12.1 Overview ......................................................................................................................................99
12.2 Static Route Screen .......................................................................................................................99
12.2.1 Add/Edit Static Route ..........................................................................................................100
12.3 Dynamic Routing Screen .............................................................................................................101
Chapter 13
Interface Group.................................................................................................................................102
13.1 Overview .......................................................................................................................................102
13.2 Interface Group Screen .................................................................................................................102
13.2.1 Interface Group > Add Screen .............................................................................................103
Chapter 14
Firewall ..............................................................................................................................................104
14.1 Overview .....................................................................................................................................104
14.1.1 What You Can Do ................................................................................................................104
14.1.2 What You Need To Know .....................................................................................................104
14.2 General Screen ............................................................................................................................105
14.3 Services Screen ............................................................................................................................106
Chapter 15
Content Filtering...............................................................................................................................109
15.1 Overview .......................................................................................................................................109
15.2 Content Filter .................................................................................................................................109
Chapter 16
IPv6 Firewall......................................................................................................................................112
16.1 Overview ....................................................................................................................................... 112
16.2 IPv6 Firewall Screen .................................................................................................................... 112
Chapter 17
Bandwid th Management....................................................................... ........... .......... .......................114
17.1 Overview ...................................................................................................................................... 114
17.2 What You Can Do ......................................................................................................................... 114
17.3 What You Need To Know .............................................................................................................. 115
17.4 General Screen ............................................................................................................................ 115
17.5 Advanced Screen ......................................................................................................................... 116
Table of Contents
LTE3301 Series User’s Guide
8
17.5.1 Add Bandwidth management Rule ..................................................................................... 116
Chapter 18
Universal Plug-and-Play (UPnP)......................................................................................................118
18.1 Overview ...................................................................................................................................... 118
18.2 What You Need to Know ............................................................................................................... 118
18.2.1 NAT Traversal ...................................................................................................................... 118
18.2.2 Cautions with UPnP ............................................................................................................. 118
18.3 UPnP Screen ............................................................................................................................... 119
18.4 Technical Reference ...................................................................................................................... 119
18.4.1 Using UPnP in Windows XP Example ................................................................................. 119
18.4.2 Web Configurator Easy Access ...........................................................................................121
Chapter 19
TR-069................................................................................................................................................124
19.1 Overview .......................................................................................................................................124
19.2 TR-069 Screen ..............................................................................................................................124
Chapter 20
Maintenance......................................................................................................................................126
20.1 Overview .......................................................................................................................................126
20.2 What You Can Do .........................................................................................................................126
20.3 General Screen .............................................................................................................................126
20.4 Account Screen .............................................................................................................................127
20.4.1 Edit a User Account ............................................................................................................127
20.5 Time Setting Screen ......................................................................................................................128
20.6 Firmware Upgrade Screen ............................................................................................................130
20.7 Configuration Backup/Restore Screen ..........................................................................................131
20.8 Restart Screen ..............................................................................................................................133
Chapter 21
Troubleshooting................................................................................................................................134
21.1 Overview .......................................................................................................................................134
21.2 Power, Hardware Connections, and LEDs ....................................................................................134
21.3 LTE3301 Access and Login ..........................................................................................................135
21.4 Internet Access .............................................................................................................................136
21.5 Wireless Connections ...................................................................................................................137
21.6 Getting More Troubleshooting Help ..............................................................................................138
Appendix A Pop-up Windows, JavaScript and Java Permissions ...................................................139
Appendix B Setting Up Your Computer’s IP Address ......................................................................148
Appendix C Common Services........................................................................................................174
Table of Contents
LTE3301 Series User’s Guide
9
Appendix D Legal Information .........................................................................................................177
Appendix E Customer Support ........................................................................................................184
Index ..................................................................................................................................................190
10
PART I
User’s Guide
LTE3301 Series User’s Guide
11
CHAPTER 1
Introduction
1.1 Overview
This chapter introduces the main features and applications of the LTE3301.
The LTE3301 is a wireless router, which can connect to a mobile network and the Internet through a
wireless WAN connection and provide easy network access to mobile users without additional
wiring. You can set up a wireless network with other IEEE 802.11b/g/n compatible devices.
A range of services such as a firewall and content filtering are also available for secure Internet
computing.
1.2 Applications
Your can have the following networks with the LTE3301:
•Wired. You can connect network devices via the Ethernet ports of the LTE3301 so that they can
communicate with each other and access the Internet.
•Wireless LAN. Wireless clients can connect to the LTE3301 to access network resources. You
can use WPS (Wi-Fi Protected Setup) to create an instant network connection with another WPS-
compatible device.
•Wireless WAN. Insert a 4G SIM card into the SIM card slot to connect to a mobile network for
Internet access.
Chapter 1 Introduction
LTE3301 Series User’s Guide
12
1.3 Ways to Manage the LTE3301
Use any of the following methods to manage the LTE3301.
• WPS (Wi-Fi Protected Setup). You can use the WPS button or the WPS section of the Web
Configurator to set up a wireless network with your LTE3301.
• Web Configurator. This is recommended for everyday management of the LTE3301 using a
(supported) web browser.
1.4 Good Habits for Managing the LTE3301
Do the following things regularly to make the LTE3301 more secure and to manage the LTE3301
more effectively.
• Change the password. Use a password that’s not easy to guess and that consists of different
types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). See Section 20.7 on page
131. Restoring an earlier working configuration may be useful if the device becomes unstable or
even crashes. If you forget your password, you will have to reset the LTE3301 to its factory
default settings. If you backed up an earlier configuration file, you would not have to totally re-
configure the LTE3301. You could simply restore your last configuration.
1.5 Resetting the LTE3301
If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the LTE3301 to reload the factory-default configuration file.
This means that you will lose all configurations that you had previously saved, the password will be
reset to “1234” (see Section 20.4 on page 127) and the IP address will be reset to “192.168.1.1”.
1.5.1 How to Use the RESET Button
1Make sure the power LED is on.
2Press the RESET button for one to four seconds to restart/reboot the LTE3301.
3Press the RESET button for longer than ten seconds to set the LTE3301 back to its factory-default
configurations.
1.6 The WPS Button
Your LTE3301 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
Chapter 1 Introduction
LTE3301 Series User’s Guide
13
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
Depending on the devices you have, you can either press a button (on the device itself, or in its
configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device
to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set
up a secure network by themselves.
You can use the WPS button ( ) on the top panel of the LTE3301 to activate WPS in order to
quickly set up a wireless network with strong security.
1Make sure the power LED is on (not blinking).
2Press the WPS button for more than three seconds and release it. Press the WPS button on another
WPS-enabled device within range of the LTE3301.
Note: You must activate WPS in the LTE3301 and in another wireless device within two
minutes of each other.
For more information on using WPS, see Section 4.2 on page 30.
1.7 SIM Card Slot
The LTE3301 comes with a built-in 4G LTE module for 4G connections. To set up a 4G connection
using the built-in 4G LTE module, just insert a 4G SIM card into the SIM card slot at the back of the
LTE3301.
Note: You must insert the 4G SIM card into the card slot before turning on the LTE3301.
1.8 LEDs
Figure 1 Front Panel
Power LAN
Internet
WLAN/WPS
LTE
LTE Signal
Strength
Chapter 1 Introduction
LTE3301 Series User’s Guide
14
The following table describes the LEDs.
1.9 Wall Mounting
You may need screw anchors if mounting on a concrete or brick wall.
Table 1 Front panel LEDs
LED COLOR STATUS DESCRIPTION
Power Green On The LTE3301 is receiving power and functioning properly.
Blinking The LTE3301 is in the process of starting up or default restoring.
Off The LTE3301 is not receiving power.
Internet Green On The LTE3301’s WAN connection is ready.
Blinking The LTE3301 is sending/receiving data through the WAN.
Off The WAN connection is not ready, or has failed.
LTE Green On The LTE3301 is registered and successfully connected to a 4G
network.
Blinking
(slow)
The LTE3301 is registered and successfully connected to a 2G/
3G network.
Blinking
(fast)
The LTE3301 Series is looking for an available 4G/3G/2G
network.
Off There is no SIM card inserted, the SIM card is invalid, the PIN
code is not correct or there is no service.
LTE Signal
Strength
Green On A valid SIM card is inserted and the wireless WAN interface is
enabled.
Signal strength: Excellent
RSRP (Reference Signal Receiving Power) >= -79 dBm
Orange On Signal strength: Fair
-81 dBm >= RSRP >= -95 dBm
Red On Signal strength: Poor
-97 dBm > RSRP
Blinking There is no LTE signal because there is no valid SIM card
inserted and/or the wireless WAN interface is disabled.
WLAN/WPS Green On The LTE3301 is ready and the 2.4GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking
(slow)
The LTE3301 is sending/receiving data through the wireless
LAN.
Blinking
(fast)
The LTE3301 is negotiating a WPS connection with a wireless
client.
Off The wireless LAN is not ready or has failed or WPS is disabled.
LAN Green On The LTE3301’s LAN connection is ready.
Off The LAN connection is not ready, or has failed.
Table 2 Wall Mounting Information
Distance between holes 11 cm
Chapter 1 Introduction
LTE3301 Series User’s Guide
15
1Select a position free of obstructions on a wall strong enough to hold the weight of the device.
2Mark two holes on the wall at the appropriate distance apart for the screws.
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
3If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the
full depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way
in - leave a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the
screws all the way in - leave a gap of about 0.5 cm.
4Make sure the screws are fastened well enough to hold the weight of the LTE3301 with the
connection cables.
5Align the holes on the back of the LTE3301 with the screws on the wall. Hang the LTE3301 on the
screws.
Figure 2 Wall Mounting Example
M4 Screws Two
Screw anchors (optional) Two
Table 2 Wall Mounting Information
LTE3301 Series User’s Guide
16
CHAPTER 2
Introducing the Web Configurator
2.1 Overview
This chapter describes how to access the LTE3301 Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the LTE3301 via Internet browser. Use Internet Explorer 9.0 and later versions,
Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or Google Chrome 26.0 and later
versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter (Chapter 21 on page 134) to see how to make sure these
functions are allowed in Internet Explorer.
2.2 Accessing the Web Configurator
1Make sure your LTE3301 hardware is properly connected and prepare your computer or computer
network to connect to the LTE3301 (refer to the Quick Start Guide).
2Launch your web browser.
3Type "http://192.168.1.1" as the website address.
Your computer must be in the same subnet in order to access this website address.
2.2.1 Login Screen
The Web Configurator initially displays the following login screen.
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
17
Figure 3 Login screen
The following table describes the labels in this screen.
2.2.2 Password Screen
You should see a screen asking you to change your password (highly recommended) as shown
next.
Figure 4 Change Password Screen
Table 3 Login screen
LABEL DESCRIPTION
User Type "admin" (default) as the user name.
Password Type "1234" (default) as the password. Click Login.
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
18
The following table describes the labels in this screen.
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes; go to Chapter
20 on page 126 to change this). Simply log back into the LTE3301 if this happens.
2.3 The Main Screen
The Web Configurator’s main screen is divided into these parts:
Figure 5 The Web Configurator’s Main Screen
Table 4 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Retype to Confirm Retype the password for confirmation.
Apply Click Apply to save your changes back to the LTE3301.
Ignore Click Ignore if you do not want to change the password this time.
A
C
B
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
19
•A - Title Bar
•B - Navigation Panel
•C - Main Window
2.3.1 Title Bar
The title bar provides some useful links that always appear over the screens below, regardless of
how deep into the Web Configurator you navigate.
Figure 6 Title Bar
The icons provide the following functions.
2.3.2 Navigation Panel
Use the sub-menus on the navigation panel to configure LTE3301 features.
Figure 7 Navigation Panel
Table 5 Title Bar: Web Configurator Icons
LABEL DESCRIPTION
Wizard Click this icon to open the setup wizard for the LTE3301.
About Click this icon to open a screen where you can click a link to visit the ZyXEL web site to see
detailed product information.
Logout Click this icon to log out of the Web Configurator.
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
20
The following table describes the sub-menus.
Table 6 Navigation Panel
LINK TAB FUNCTION
Status This screen shows the LTE3301’s general device, system and interface
status information. Use this screen to access the summary statistics tables.
Monitor
Log Use this screen to view the list of activities recorded by your LTE3301.
DHCP Table Use this screen to view current DHCP client information.
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN Station
Status
Use this screen to view the wireless stations that are currently associated
to the LTE3301’s 2.4GHz wireless LAN.
LTE Modem
Status
Use this screen to view the detailed information about the LTE module,
cellular interface, and SIM card. You can also view the LTE connection
status.
Configuration
Network
WAN Management
WAN
This screen allows you to configure ISP parameters, WAN IP address
assignment, and DNS servers.
Network
Scan
Use this screen to specify the type of the mobile network to which the
LTE3301 is connected and how you want the LTE3301 to connect to an
available mobile network.
IPv6 Use this screen to configure the LTE3301’s IPv6 settings.
Wireless LAN General Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
More AP Use this screen to configure multiple BSSs on the LTE3301.
MAC Filter Use the MAC filter screen to allow or deny wireless stations based on their
MAC addresses from connecting to the LTE3301.
Advanced This screen allows you to configure advanced wireless LAN settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS Use this screen to configure the WPS settings.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to enable and configure the WDS settings.
LAN IP Use this screen to configure LAN IP address and subnet mask.
DHCP Server General Use this screen to enable the LTE3301’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Client List Use this screen to view information related to your DHCP status.
NAT General Use this screen to enable NAT.
Port
Forwarding
Use this screen to configure servers behind the LTE3301 and forward
incoming service requests to the server(s) on your local network.
Port Trigger Use this screen to change your LTE3301’s port triggering settings.
ALG Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE3301.
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
21
2.4 Status Screen
Click to open the status screen.
Dynamic
DNS Dynamic DNS Use this screen to set up dynamic DNS.
Routing Static Route Use this screen to configure IP static routes.
Dynamic
Routing
Use this screen to enable and configure RIP on the LTE3301.
Interface
Group Interface
Group
Use this screen to create a new interface group.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content
Filter Content Filter Use this screen to restrict web features and designate a trusted computer.
You can also block certain web sites containing certain keywords in the
URL.
IPv6 firewall Services Use this screen to configure IPv6 firewall rules.
Management
Bandwidth
Management General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
UPnP UPnP Use this screen to enable UPnP on the LTE3301.
TR069 TR069 Use this screen to configure your LTE3301 to be managed by an ACS.
Maintenance
General General Use this screen to view and change administrative settings such as system
and domain names.
Account User Account Use this screen to change the user name and password of your LTE3301.
Time Time Setting Use this screen to change your LTE3301’s time and date.
Firmware
Upgrade Firmware
Upgrade
Use this screen to upload firmware to your LTE3301.
Backup/
Restore Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your LTE3301.
Restart System
Restart
This screen allows you to reboot the LTE3301 without turning the power
off.
Table 6 Navigation Panel (continued)
LINK TAB FUNCTION
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
22
Figure 8 Status Screen
The following table describes the icons shown in the Status screen.
Table 7 Status Screen Icon Key
ICON DESCRIPTION
Select a number of seconds or None from the drop-down list box to refresh all screen statistics
automatically at the end of every time interval or to not refresh the screen statistics.
Click this button to refresh the status screen statistics.
Click this icon to see the Status page. The information in this screen depends on the device
mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
23
The following table describes the labels shown in the Status screen.
Table 8 Status Screen
LABEL DESCRIPTION
Device Information
Host Name This is the Sy stem Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
IP Address This shows the WAN port’s IP address.
IP Subnet Mask This shows the WAN port’s subnet mask.
Default Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the IPv6 address of the LTE3301 on the WAN.
Operation Band This shows the network type and the frequency band used by the mobile network to which
the LTE3301 is connecting.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Server or Disable.
IPv6 Address This shows the IPv6 address of the LTE3301 on the LAN.
WLAN Information
WLAN OP Mode This is the device mode to which the LTE3301’s wireless LAN is set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the LTE3301 in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
System This shows the wireless standards the LTE3301 supports.
Security This shows the level of wireless security the LTE3301 is using.
Firewall This shows whether the firewall is enabled or not.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section 5.5 on page 44).
Use this screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 5.6 on page
45). Use this screen to view the wireless stations that are currently associated to the
LTE3301’s 2.4GHz wireless LAN.
LTE Modem Status Click Details... to go to the Monitor > LTE Modem Status screen (Section 5.6 on page
45). Use this screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also view the LTE connection status.
System Status
Item This column shows the type of data the LTE3301 is recording.
Data This column shows the actual data recorded by the LTE3301.
System Up Time This is the total time the LTE3301 has been on.
Current Date/Time This field displays your LTE3301’s present date and time.
System Resource
Chapter 2 Introducing the Web Configurator
LTE3301 Series User’s Guide
24
- CPU Usage This displays what percentage of the LTE3301’s processing ability is currently used. When
this percentage is close to 100%, the LTE3301 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the LTE3301 is using.
Interface Status
Interface This displays the LTE3301 port types. The port types are: WAN, LAN and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz WLAN, it displays Up when the 2.4GHz WLAN is enabled or Down when the
2.4G WLAN is disabled.
Rate For the LAN ports, this displays the port speed or is left blank when the line is disconnected.
For the WAN port, it always displays the maximum transmission rate.
For the 2.4GHz WLAN, it displays the maximum transmission rate when the WLAN is enabled
and is left blank when the WLAN is disabled.
Table 8 Status Screen (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
25
CHAPTER 3
Setup Wizard
3.1 Overview
This chapter provides information on the wizard setup screens in the Web Configurator.
The Web Configurator’s wizard helps you configure your device to access the Internet and change
the wireless LAN settings. Refer to your ISP for your Internet account information. Leave a field
blank if you don’t have that information.
3.2 Accessing the Wizard
1Launch your web browser and type "http://192.168.1.1" as the website address. Type "admin"
(default) as the user name, "1234" (default) as the password and click Login.
2Click the Wizard icon in the top right corner of the web configurator to open the Wizard screen.
Figure 9 Title Bar: Wizard icon
3.3 Wizard Setup
1The first wizard screen displays showing the main steps in the wizard setup. Click Next to proceed
with the time zone setup screen.
Chapter 3 Setup Wizard
LTE3301 Series User’s Guide
26
Figure 10 Wizard: Start
2The LTE3301 automatically detects your location and displays the correct time zone. If the result is
not correct, click Detect Again or manually select the time zone of LTE3301’s location and click
Next.
Figure 11 Wizard: Time
3Enter your APN (Access Point Name) provided by your service provider. Select the country where
the LTE3301 is located and your service provider name. Click Next.
Chapter 3 Setup Wizard
LTE3301 Series User’s Guide
27
Figure 12 Wizard: WAN
4Use this screen to enable or disable the LTE3301’s wireless LAN, and enter the wireless network
name (SSID). Select a channel or use Auto to have the LTE3301 automatically determine a channel
to use. Click Next.
Figure 13 Wizard: Wireless Settings
5Select WPA2-PSK and enter a pre-shared key from 8 to 63 case-sensitive characters for data
encryption. The wireless clients which want to associate with this wireless network must have the
same wireless security settings. Otherwise, select No Security to allow any client to associate with
this network without any data encryption or authentication. Click Next.
Chapter 3 Setup Wizard
LTE3301 Series User’s Guide
28
Figure 14 Wizard: Wireless Security
6Use the read-only summary table to check whether what you have configured is correct. Click
Apply Settings to save your settings. Otherwise, click Back to go back to the previous screens.
Figure 15 Wizard: Summary
7The system takes about 35 seconds to apply settings.
Chapter 3 Setup Wizard
LTE3301 Series User’s Guide
29
Figure 16 Wizard: Apply Settings
8Click Finish to complete the wizard setup.
Figure 17 Wizard: Finish
You are now ready to connect wirelessly to your LTE3301 and access the Internet.
LTE3301 Series User’s Guide
30
CHAPTER 4
Tutorials
4.1 Overview
This chapter provides tutorials for setting up your LTE3301.
•Set Up a Wireless Network Using WPS
•Connect to LTE3301 Wireless Network without WPS
•Using Multiple SSIDs on the LTE3301
4.2 Set Up a Wireless Network Using WPS
This section gives you an example of how to set up wireless network using WPS. This example uses
the LTE3301 as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
There are two WPS methods for creating a secure connection via the web configurator or utility.
This tutorial shows you how to do both.
•Push Button Configuration (PBC) - create a secure wireless network simply by pressing a
button. See Section 4.2.1 on page 30. This is the easier method.
•PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the LTE3301’s interface. See Section 4.2.2 on page 31. This is
the more secure method, since one device can authenticate the other.
4.2.1 Push Button Configuration (PBC)
1Make sure that your LTE3301 is turned on. Make sure the WIFI button (at the back panel of the
LTE3301) is pushed in, and that the device is placed within range of your notebook.
2Make sure that you have installed the wireless client (this example uses the NWD210N) driver and
utility in your notebook.
3In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or
WPS button)
4Log into LTE3301’s Web Configurator and press the Push Button in the Configuration >
Network > Wireless LAN 2.4G > WPS Station screen.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
31
Note: Your LTE3301 has a WPS button located on its panel, as well as a WPS button in its
configuration utility. Both buttons have exactly the same function; you can use one
or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The LTE3301 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the LTE3301 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both LTE3301 and wireless client (the NWD210N in this example).
Figure 18 Example WPS Process: PBC Method
4.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both LTE3301’s configuration
interface and the client’s utilities.
1Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2Enter the PIN number to the PIN field in the Configuration > Network > Wireless LAN > WPS
Station screen on the LTE3301.
Wireless Client Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
Chapter 4 Tutorials
LTE3301 Series User’s Guide
32
3Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
LTE3301’s WPS Station screen within two minutes.
The LTE3301 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the LTE3301 securely.
The following figure shows you the example to set up wireless network and security on LTE3301
and wireless client (ex. NWD210N in this example) by using PIN method.
Figure 19 Example WPS Process: PIN Method
4.3 Connect to LTE3301 Wireless Network without WPS
This example shows you how to configure wireless security settings with the following parameters
on your LTE3301 and connect your computer to the LTE3301 wireless network.
Follow the steps below to configure the wireless settings on your LTE3301.
WITHIN 2 MINUTES
Wireless Client
Access Point
SSID SSID_Example3
Channel 6
Security WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
Chapter 4 Tutorials
LTE3301 Series User’s Guide
33
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 16).
1Make sure the WIFI switch (at the back panel of the LTE3301) is set to ON.
2Open the Configuration > Network > Wireless LAN > General screen in the AP’s Web
Configurator.
3Confirm that the wireless LAN is enabled on the LTE3301.
4Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to
WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click
Apply.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
34
5Open the Status screen. Verify your wireless and wireless security settings under Device
Information and check if the WLAN connection is up under Interface Status.
4.3.1 Configure Your Notebook
Note: In this example, we use the ZyXEL NWD6505 wireless adapter as the wireless
client and use the Windows built-in utility (Windows Zero Configuration (WZC)) to
connect to the wireless network.
1The LTE3301 supports IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n wireless clients. Make sure
that your notebook or computer’s wireless adapter supports one of these standards.
2Wireless adapters come with software sometimes called a “utility” that you install on your
computer. See your wireless adapter’s User’s Guide for information on how to do that.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
35
3After you’ve installed the driver and attached the NWD6505 to your computer’s USB port, right-
click the Wireless Network Connection icon in your computer’s system tray, select and click
View Available Wireless Networks.
4The Wireless Network Connection screen displays. Click Refresh network list to view the
available wireless APs within range.
5Select SSID_Example3 and click Connect.
6Type the security key in the following screen. Click Connect.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
36
7Check the status of your wireless connection in the screen below.
8If the wireless client keeps trying to connect to or acquiring an IP address from the LTE3301, make
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the
LTE3301.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
4.4 Using Multiple SSIDs on the LTE3301
You can configure more than one SSID on a LTE3301. See Section 7.4 on page 71.
This allows you to configure multiple independent wireless networks on the LTE3301 as if there
were multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That
is, each SSID on the LTE3301 represents a different access point/wireless network to wireless
clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the LTE3301 (such as a
printer).
Chapter 4 Tutorials
LTE3301 Series User’s Guide
37
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.
4.4.1 Configuring Security Settings of Multiple SSIDs
The LTE3301 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your
LTE3301 .
1Connect your computer to the LAN port of the LTE3301 using an Ethernet cable.
2The default IP address of the LTE3301is “192.168.1.1”. In this case, your computer must have an IP
address in the range between “192.168.1.2” and “192.168.1.254”.
3Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix B on page 148 for information on changing your computer’s IP address.
4After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.1” as the web address in your web browser.
5Enter “admin” as the user name and “1234” (default) as the password and click Login.
6Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
A
B
C
SSID_Guest
SSID_Worker
SSID_VoIP
SSID SECURITY TYPE KEY
SSID_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNetwork
SSID_VoIP WPA-PSK VoIPOnly12345678
SSID_Guest WPA-PSK keyexample123
Chapter 4 Tutorials
LTE3301 Series User’s Guide
38
7Go to Configuration > Network > Wireless LAN > More AP. Click the Edit icon of the first
entry to configure wireless and security settings for SSID_Worker.
8Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Worker
to allow wireless clients in the same wireless network to communicate with each other. Click Apply.
9Click the Edit icon of the second entry to configure wireless and security settings for SSID_VoIP.
10 Configure the screen as follows. You do not enable Intra-BSS Traffic for SSID_VoIP. Click Apply.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
39
11 Click the Edit icon of the third entry to configure wireless and security settings for SSID_Guest.
12 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Guest to
allow wireless clients in the same wireless network to communicate with each other. Click Apply.
Chapter 4 Tutorials
LTE3301 Series User’s Guide
40
41
PART II
Technical Reference
LTE3301 Series User’s Guide
42
CHAPTER 5
Monitor
5.1 Overview
This chapter discusses read-only information related to the device state of the LTE3301.
To access the Monitor screens, click after login.
You can also click the links in the Summary table of the Status screen to view the packets sent/
received as well as the status of wireless clients connected to the LTE3301.
5.2 What You Can Do
•Use the Log screen to see the logs for the activity on the LTE3301 (Section 5.3 on page 42).
•Use the DHCP Table screen to view information related to your DHCP status (Section 5.4 on
page 44).
•use the Packet Statistics screen to view port status, packet specific statistics, the "system up
time" and so on (Section 5.5 on page 44).
•Use the WLAN Station Status screen to view the wireless stations that are currently associated
to the LTE3301 (Section 5.6 on page 45).
•Use the LTE Modem Status screen to view the detailed information about the LTE module,
cellular interface, and SIM card. You can also check the LTE connection status (Section 5.7 on
page 46).
5.3 The Log Screen
The Web Configurator allows you to look at all of the LTE3301’s logs in one location.
Chapter 5 Monitor
LTE3301 Series User’s Guide
43
5.3.1 View Log
Use the View Log screen to see the logged messages for the LTE3301. The log wraps around and
deletes the old entries after it fills. Select what logs you want to see in the Log Setting screen.
Click Refresh to renew the log screen. Click Clear Log to delete all the logs.
Figure 20 View Log
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 21 Log Settings
Chapter 5 Monitor
LTE3301 Series User’s Guide
44
5.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the LTE3301’s LAN as a
DHCP server or disable it. When configured as a server, the LTE3301 provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
Click Monitor > DHCP Table or Configuration > Network > DHCP Server > Client List. Read-
only information here relates to your DHCP status. The DHCP table shows current DHCP client
information (including MAC Address, and IP Address) of all network clients using the LTE3301’s
DHCP server.
Figure 22 Monitor > DHCP Table
The following table describes the labels in this screen.
5.5 Packet Statistics
Click Monitor > Packet Statistics or the Packet Statistics (Details...) hyperlink in the Status
screen. Read-only information here includes port status, packet specific statistics and the "system
up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.
Table 9 Monitor > DHCP Table
LABEL DESCRIPTION
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb) or
down (a gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 5 Monitor
LTE3301 Series User’s Guide
45
Figure 23 Monitor > Packet Statistics
The following table describes the labels in this screen.
5.6 WLAN Station Status
Click Monitor > WLAN Station Status or the WLAN Station Status (Details...) hyperlink in the
Status screen. View the wireless stations that are currently associated to the LTE3301’s 2.4GHz
wireless network in the Association List. Association means that a wireless client (for example,
your network or computer with a wireless network card) has connected successfully to the AP (or
wireless router) using the same SSID, channel and security settings.
Ta ble 10 Monitor > Packet Statistics
LABEL DESCRIPTION
Port This is the LTE3301’s interface type.
Status For the LAN ports, this displays the port speed and duplex setting or Down when the
line is disconnected.
For the WAN port, it displays Up when the mobile data connection is up, Connecting
when the LTE3301 is trying to bring the mobile data connection up, and displays Down
when the 3G/4G connection is down or not activated.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled
and Down when the WLAN is disabled.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Collisions This is the number of collisions on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total time the LTE3301 has been for each session.
System Up Time This is the total time the LTE3301 has been on.
Poll Interval(s) Enter the time interval in seconds for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Inte rval(s)
field.
Stop Click Stop to stop refreshing statistics.
Chapter 5 Monitor
LTE3301 Series User’s Guide
46
Figure 24 Monitor > WLAN Station Status
The following table describes the labels in this screen.
5.7 LTE Modem Status
Click Monitor > LTE Modem Status or the LTE Modem Status (Details...) hyperlink in the
Status screen. Use this screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also check the LTE connection status.
Figure 25 Monitor > LTE Modem Status
The following table describes the labels in this screen.
Table 11 Monitor > WLAN Station Status
LABEL DESCRIPTION
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Association Time This field displays the time a wireless station first associated with the LTE3301’s WLAN.
Ta ble 12 Monitor > LTE Modem Status
LABEL DESCRIPTION
Modem Information
Physical Interface This displays the interface used for the mobile data connection.
Chapter 5 Monitor
LTE3301 Series User’s Guide
47
Module Name This displays the name of the built-in LTE module.
IMEI/MEID This displays the International Mobile Equipment Number (IMEI) or Mobile Equipment
Identifier (MEID), which is the serial number of the built-in LTE module. It is a unique
15-digit number used to identify a mobile device.
HW Version This displays the hardware version of the built-in LTE module.
FW Version This displays the firmware version of the built-in LTE module.
SIM Status
SIM This displays the status of the inserted SIM card. N/A displays if there is no SIM card
inserted.
PIN Code Status This displays the status of PIN code authentication.
PIN Code Remaining
Times
This displays how many times you can enter the PIN code.
PUK Code
Remaining Times
This displays how many times you can enter the PUK code.
Service Information
Operator This displays the name of the service provider.
Cell Broadcast This displays whether the one-to-many messaging service is available.
MCC This displays the Mobile Country Code (MCC), which is used to identify the country of a
mobile subscriber.
MNC This displays the Mobile Network Code (MNC), which is used in combination with MCC
to identify the public land mobile network (PLMN) of a mobile subscriber.
LAC This displays the 2-octet Location Area Code (LAC), which is used to identify a location
area within a PLMN.
TAC This displays the Tracking Area Code (TAC), which is to identify a tracking area within a
PLMN.
Physical Cell ID This displays the ID of a cell at the physical layer.
Service Type This displays the type of the mobile network to which the LTE3301 is connecting.
Operation Band This displays the network type and the frequency band used by the mobile network to
which the LTE3301 is connecting.
RSSI This displays the received signal strength indicator (RSSI), that is, the received signal
strength in dBm.
CS Register Status This displays the Circuit Switched network registration status.
EcIo This displays the ratio (in dB) of the received energy per chip and the interference level.
PS Register Status This displays the packet switched network registration status.
PS Attached Status This displays the Packet switched Domain Attachment status.
Roaming Status This displays whether the LTE3301 is connected to another service provider’s mobile
network using roaming.
IMSI This displays the International Mobile Subscriber Identity (IMSI) stored in the SIM
(Subscriber Identity Module) card. The SIM card is installed in a mobile device and used
for authenticating a customer to the carrier network. IMSI is a unique 15-digit number
used to identify a user on a network.
SMSC This displays the number for Short Message Service Center (SMSC), which stores,
forwards and delivers SMS text message.
MSISDN This displays the MSISDN (Mobile Subscriber ISDN) number, a phone number assigned
to a mobile subscriber to call a mobile device.
Ta ble 12 Monitor > LTE Modem Status (continued)
LABEL DESCRIPTION
Chapter 5 Monitor
LTE3301 Series User’s Guide
48
RSRP This displays the Reference Signal Receive Power (RSRP), which is the average received
power of all Resource Elements (RE) that carry cell-specific Reference Signals (RS)
within the specified bandwidth.
RSRQ This displays the Reference Signal Received Quality (RSRQ), which is the ratio of RSRP
to the E-UTRA carrier RSSI and indicates the quality of the received reference signal.
SINR This displays the Signal to Interference plus Noise Ratio (SINR). A negative value
means more noise than signal.
PLMN This displays the Public Land Mobile Network (PLMN) code of the mobile network.
MIMO This displays the MIMO (Multi-input Multi-output) technology supported by the
LTE3301, such as 1T2R (1 Transmit and 2 Receive paths/antennas) or TM1-TM4
(Transmission Mode 4).
Support Band List This displays the frequency bands that are supported by the LTE3301.
Ta ble 12 Monitor > LTE Modem Status (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
49
CHAPTER 6
WAN
6.1 Overview
This chapter discusses the LTE3301’s WAN screens. Use these screens to configure your LTE3301
for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
3G and 4G standards for the sending and receiving of voice, video, and data in a mobile
environment. You can insert a 4G SIM card and set the LTE3301 to use this 3G/4G connection as
your WAN.
Figure 26 LAN/Wireless LAN and Wireless WAN
6.2 What You Can Do
•Use the Management WAN screen to configure 3G/4G WAN connection settings (Section 6.4 on
page 52).
•Use the Network Scan screen to specify the type of the mobile network to which the LTE3301 is
connected and how you want the LTE3301 to connect to an available mobile network (Section 6.5
on page 56).
•Use the IPv6 screen to configure the LTE3301’s IPv6 settings (Section 6.6 on page 58).
LAN
Chapter 6 WAN
LTE3301 Series User’s Guide
50
6.3 What You Need To Know
The information in this section can help you configure the screens for your WAN connection, as well
as enable/disable some advanced features of your LTE3301.
3G
3G (Third Generation) is a digital, packet-switched wireless technology. Bandwidth usage is
optimized as multiple users share the same channel and bandwidth is only allocated to users when
they send data. It allows fast transfer of voice and non-voice data and provides broadband Internet
access to mobile devices.
4G
4G is the fourth generation of the mobile telecommunications technology and a successor of 3G.
Both the WiMAX and Long Term Evolution (LTE) standards are the 4G candidate systems. 4G only
supports all-IP-based packet-switched telephony services and is required to offer gigabit speed
access.
DNS Server Address Assignment
Use Domain Name System (DNS) to map a domain name to its corresponding IP address and vice
versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely
important because without it, you must know the IP address of a computer before you can access
it.
The LTE3301 can get the DNS server addresses in the following ways.
1The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you
sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields.
2If your ISP dynamically assigns the DNS server IP addresses (along with the LTE3301’s WAN IP
address), set the DNS server fields to get the DNS server address from the ISP.
Chapter 6 WAN
LTE3301 Series User’s Guide
51
Multicast
Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient)
or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of
hosts on the network - not everybody and not just 1.
Figure 27 Multicast Example
In the multicast example above, systems A and D comprise one multicast group. In multicasting,
the server only needs to send one data stream and this is delivered to systems A and D.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership
in a multicast group - it is not used to carry user data. The LTE3301 supports both IGMP version 1
(IGMP v1), IGMP version 2 (IGMP v2) and IGMP version 3 (IGMP v3).
At start up, the LTE3301 queries all directly connected networks to gather group membership. After
that, the LTE3301 periodically updates this information. IP multicasting can be enabled/disabled on
the LTE3301 WAN interface in the Web Configurator.
IPv6 Introduction
IPv6 (Internet Protocol version 6), is designed to enhance IP address size and features. The
increase in IPv6 address size to 128 bits (from the 32-bit IPv4 address) allows up to 3.4 x 1038 IP
addresses. The LTE3301 can use IPv4/IPv6 dual stack to connect to IPv4 and IPv6 networks, and
supports IPv6 rapid deployment (6RD).
IPv6 Addressing
The 128-bit IPv6 address is written as eight 16-bit hexadecimal blocks separated by colons (:). This
is an example IPv6 address 2001:0db8:1a2b:0015:0000:0000:1a2f:0000.
IPv6 addresses can be abbreviated in two ways:
• Leading zeros in a block can be omitted. So 2001:0db8:1a2b:0015:0000:0000:1a2f:0000 can
be written as 2001:db8:1a2b:15:0:0:1a2f:0.
• Any number of consecutive blocks of zeros can be replaced by a double colon. A double colon can
only appear once in an IPv6 address. So 2001:0db8:0000:0000:1a2f:0000:0000:0015 can be
written as 2001:0db8::1a2f:0000:0000:0015, 2001:0db8:0000:0000:1a2f::0015,
2001:db8::1a2f:0:0:15 or 2001:db8:0:0:1a2f::15.
Chapter 6 WAN
LTE3301 Series User’s Guide
52
IPv6 Prefix and Prefix Length
Similar to an IPv4 subnet mask, IPv6 uses an address prefix to represent the network address. An
IPv6 prefix length specifies how many most significant bits (start from the left) in the address
compose the network address. The prefix length is written as “/x” where x is a number. For
example,
2001:db8:1a2b:15::1a2f:0/32
means that the first 32 bits (2001:db8) is the subnet prefix.
IPv6 Subnet Masking
Both an IPv6 address and IPv6 subnet mask compose of 128-bit binary digits, which are divided
into eight 16-bit blocks and written in hexadecimal notation. Hexadecimal uses four bits for each
character (1 ~ 10, A ~ F). Each block’s 16 bits are then represented by four hexadecimal
characters. For example, FFFF:FFFF:FFFF:FFFF:FC00:0000:0000:0000.
IPv6 Rapid Deployment
Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4
network. When the LTE3301 has an IPv4 WAN address, you can enable 6rd to encapsulate IPv6
packets in IPv4 packets to cross the ISP’s IPv4 network.
The LTE3301 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to
the ISP’s Border Relay router (BR in the figure) to connect to the native IPv6 Internet. The local
network can also use IPv4 services. The LTE3301 uses it’s configured IPv4 WAN IP to route IPv4
traffic to the IPv4 Internet.
Figure 28 IPv6 Rapid Deployment
6.4 Management WAN
The summary table shows you the WAN connection configured on the LTE3301. Click Network >
WAN > Management WAN from the Configuration menu.
ISP (IPv4) IPv6 Internet
IPv4
IPv6
BR
IPv6 in IPv4
IPv4 Internet
IPv4
+
LAN
- IPv6
- IPv4
WAN
- IPv4
- IPv6 in IPv4
Chapter 6 WAN
LTE3301 Series User’s Guide
53
Figure 29 Network > WAN > Management WAN
The following table describes the labels in this screen.
6.4.1 Management WAN Edit
Use this screen to change your LTE3301’s 3G/4G WAN connection settings. Click the Edit icon in the
Network > WAN > Management WAN screen.
Ta ble 13 Network > WAN > Management WAN
LABEL DESCRIPTION
Interface This field displays the name of the WAN interface for this connection.
Type This field displays the type of the WAN connection.
IP Address This field displays the IPv4 and IPv6 addresses of the WAN connection.
Status This field indicates whether the IPv4 and IPv6 connectivity is available.
Modify Click the Edit icon to configure the WAN connection settings.
Chapter 6 WAN
LTE3301 Series User’s Guide
54
Figure 30 Network > WAN > Management WAN Edit
The following table describes the labels in this screen.
Ta ble 14 Network > WAN > Management WAN Edit
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation This shows the WAN connection type.
3G/4G Information
Dial-Up Profile Select Auto-Detection to have the LTE3301 use the inserted SIM card’s default
settings to connect to any available mobile network.
Select Manual and enter the information provided by your service provider to
connect to the service provider’s mobile network.
Chapter 6 WAN
LTE3301 Series User’s Guide
55
Country Select the country in which you use the LTE3301.
Service Provider Select the name of your service provider. The options vary depending on the country
you selected.
If your service provider is not in the list, select Others.
APN Connections with different APNs (Access Point Names) may provide different services
(such as Internet access or MMS (Multi-Media Messaging Service)) and charge
method.
The corresponding APN automatically displays when you select a pre-defined service
provider.
If you select Others in the Service Provider field, manually enter the APN provided
by your service provider. You can enter up to 32 ASCII printable characters. Spaces
are allowed.
PIN Code A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN
code, you cannot use the SIM card.
If your service provider enabled PIN code authentication, enter the 4-digit PIN code
(0000 for example) provided by your service provider. If you enter the PIN code
incorrectly, the SIM card may be blocked by your service provider and you cannot
use the account to access the Internet.
If your service provider disabled PIN code authentication, leave this field blank.
Dialed Number This is the phone number (dial string) used to dial up a connection to your service
provider’s base station. Your service provider should provide the phone number. For
example, *99# is the dial string to establish a GPRS or 3G/4G connection in Taiwan.
The corresponding phone number automatically displays when you select a pre-
defined service provider.
If you select Others in the Service Provider field, manually enter the phone
number provided by your service provider.
Account Type the user name (of up to 64 ASCII printable characters) given to you by your
service provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user
name above.
Authentication The LTE3301 supports PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is
readily available on more platforms
Select an authentication protocol (PAP, or CHAP) used by the service provider.
Otherwise, select Auto to have the LTE3301 accept either CHAP or PAP.
Primary DNS Enter the first DNS server address assigned by the service provider.
Secondary DNS Enter the second DNS server address assigned by the service provider.
Roaming 3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your LTE3301 is kept connected to
the Internet when you are traveling outside the geographical coverage area of the
network to which you are registered.
Connection Control Select Auto Reconnect (always-on) if you do not want the connection to time out.
Select Connect-on-Demand if you do not want the connection up all the time and
specify an idle time-out in the Maximum Idle Time field.
Maximum Idle Time Specify the time in minutes that elapses before the LTE3301 automatically
disconnects from the service provider.
MTU Enter the MTU (Maximum Transmission Unit) of each data packet, in bytes, that can
move through the WAN connection.
Ta ble 14 Network > WAN > Management WAN Edit (continued)
LABEL DESCRIPTION
Chapter 6 WAN
LTE3301 Series User’s Guide
56
6.5 Network Scan
Use this screen to set how you want the LTE3301 to connect to an available mobile network. Click
Network > WAN > Network Scan from the Configuration menu.
NAT Select this option to turn on Network Address Translation (NAT) for this connection.
Network Monitoring Select this option to have the LTE3301 test the WAN connection by periodically
sending DNS Query to a DNS server or sending a ping (ICMP Checki ng ) to either
the default gateway or the addresses you specify in the Target1 and Target2 fields.
Loading Check Select this option to check how many packets have been transmitted or received
through the WAN connection within a time period specified in the Check Interval
field.
Check Interval Type a number of seconds (0 to 99999) to set the time interval between checks.
Allow more time if your destination IP address handles lots of traffic.
Check Timeout Type the number of seconds (0 to 99999) for your LTE3301 to wait for a response to
the ping or DNS query before considering the check to have failed. This setting must
be less than the Check Interval. Use a higher value in this field if your network is
busy or congested.
Latency Threshold Type a number of milliseconds (0 to 99999) for the latency threshold.
If the specified latency threshold is exceeded, the LTE3301 considers the check to
have failed and makes a new connection after (Latency Threshold * Fail Threshold)
seconds.
Fail Threshold Type how many WAN connection checks can fail (0 to 99999) before the connection is
considered "down" (not connected). The LTE3301 still checks a "down" connection to
detect if it reconnects.
Target1/Target2 Select DNS1 to have the LTE3301 send a DNS query to the first DNS server address
assigned by the service provider.
Select DNS2 to have the LTE3301 send a DNS query to the second DNS server
address assigned by the service provider.
Select Gateway to have the LTE3301 ping the WAN interface's default gateway IP
address.
Select Other Host and enter a domain name or IP address of a reliable nearby
computer to have the LTE3301 ping that address.
Bridge Select this option to allow the computer connected to the first Ethernet LAN port to
get an individual IP address from the ISP’s DHCP server directly.
IGMP Select IGMP v1, IGMP v2, IGMP v3 or Auto to enable multicasting. This applies to
traffic routed from the WAN to the LAN.
Select Disable to turn off this feature. This may cause incoming traffic to be dropped
or sent to all connected network devices.
IGMP Proxy This field is available only when IGMP is enabled.
Select this option to have the LTE3301 act as an IGMP proxy on this connection. This
allows the LTE3301 to get subscribing information and maintain a joined member list
for each multicast group. It can reduce multicast traffic significantly.
Ta ble 14 Network > WAN > Management WAN Edit (continued)
LABEL DESCRIPTION
Chapter 6 WAN
LTE3301 Series User’s Guide
57
Figure 31 Network > WAN > Network Scan
The following table describes the labels in this screen.
Ta ble 15 Network > WAN > Network Scan
LABEL DESCRIPTION
Physical Interface This shows the type of the interface used by the WAN connection.
Network Type Select the type of the network (4G only, 3G only, or 3G/4G) to which you want the
LTE3301 to connect when there is a SIM card inserted.
Scan Approach Select Auto to have the LTE3301 connect to an available network using the default
settings on the SIM card. If the currently registered mobile network is not available
or the mobile network’s signal strength is too low, the LTE3301 switches to another
available mobile network.
Select Manually to search for and select the mobile network(s) to which you want
the LTE3301 to connect.
Network Provider List This table is available only when you set Scan Approach to Manually.
Click Scan to search for available mobile networks based on the network type you
selected.
Click Apply to save your changes in the Action field.
Provider Name This shows the name of the service provider.
Mobile System This shows the mobile telecommunications standard supported by the mobile
network.
Network Status This shows whether the mobile network is available.
Action Click Select to have the LTE3301 establish a connection to the selected mobile
network.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Refresh Click Refresh to update this screen.
Chapter 6 WAN
LTE3301 Series User’s Guide
58
6.6 IPv6
Use this screen to configure the LTE3301’s IPv6 settings. Click Network > WAN > IPv6 from the
Configuration menu.
Figure 32 Network > WAN > IPv6
The following table describes the labels in this screen.
Ta ble 16 Network > WAN > IPv6
LABEL DESCRIPTION
IPv6 Select Enable to allow the LTE3301 to run IPv6. Otherwise, select Disable.
IPv6 Connection Select Static IPv6 if you have a fixed IPv6 address assigned by your ISP.
Select DHCPv6 if you want to obtain an IPv6 address from a DHCPv6 server.
Select PPPoE if your ISP requires your to use a PPPoE connection to the IPv6
Internet. This method of connection typically requires you to enter a Username and
Password (provided by your ISP) to gain access to the IPv6 Internet. You need to
ensure that any PPPoE client software on your computer is removed or disabled.
Select 6RD to enable IPv6 rapid deployment to tunnel IPv6 traffic from the local
network through the ISP’s IPv4 network
(These fields appear when the IPv6 Connection is set to Static IPv6.)
IPv6 Address Enter the IPv6 address on the WAN side in this field.
Subnet Prefix Length Enter the address prefix length to specify how many most significant bits in an IPv6
address compose the network address.
Default Gateway Enter the IP address of the next-hop gateway. The gateway is a router or switch on
the same segment as your LTE3301's interface(s). The gateway helps forward
packets to their destinations.
Primary DNS Address Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
Chapter 6 WAN
LTE3301 Series User’s Guide
59
(These fields appear when the IPv6 Connection is set to DHCPv6.)
DNS Setting Select Obtain DNS Server address Automatically to have the LTE3301 get the
IPv6 DNS server addresses from the ISP automatically.
Select Use the following DNS address to have the LTE3301 use the IPv6 DNS
server addresses you configure manually.
Primary DNS Address Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
(These fields appear when the IPv6 Connection is set to PPPoE.)
Address Mode Select Dynamic IP if you have a dynamic IP address.
Select Static IP if the ISP assigned a fixed IP address.
IP Address Enter the static IP address provided by your ISP.
Username Enter a user name (of up to 31 printable characters) for login using PPPoE
connection.
Password Enter the password associated with the user name above.
Service Name Enter the name of your PPPoE service here.
Reconnect Mode Select Auto Reconnect (always-on) if you do not want the connection to time out.
Select Connection-on-Demand if you want to connect for a certain amount of time
before the router automatically disconnects from the PPPoE server. If you select this
you will need to enter the number of minutes in the Maximum Idle Time field.
Select Manually if want to make the connection manually.
Maximum Idle Time Specify the time in minutes that elapses before the LTE3301 automatically
disconnects from the PPPoE server.
(These fields appear when the IPv6 Connection is set to 6RD.)
Remote IPv4 Address Enter the IPv4 address of the relay server,
IPv4 Mask Length Enter the IPv4 subnet mask number (1 to 32).
Remote Prefix Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s Border Relay router and
connecting to the native IPv6 Internet.
Prefix Length Enter the address prefix length to specify how many most significant bits in an IPv6
address compose the network address.
Primary DNS Address Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
LAN IPv6 Address Enter the IPv6 address for the LTE3301 LAN interface in this field.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by LTE3301 when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Autoconfiguration Click Enable if you want the devices on your local area network to obtain network
address that are not managed by a DHCPv6 server. Otherwise, select Disable.
Autoconfiguration Type Select Stateless if you want the LTE3301 interface to automatically generate a link-
local address via stateless autoconfiguration.
Select Stateful (DHCPv6) when the devices connected to your LAN needs to have
their TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically.
IPv6 Address
Range(Start)
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which
the DHCPv6 server assigns to the clients. Enter the smallest value of the last block of
the IPv6 addresses which are to be allocated.
Ta ble 16 Network > WAN > IPv6 (continued)
LABEL DESCRIPTION
Chapter 6 WAN
LTE3301 Series User’s Guide
60
IPv6 Address
Range(End)
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which
the DHCPv6 server assigns to the clients. Enter the largest value of the last block of
the IPv6 addresses which are to be allocated.
IPv6 Address Lifetime If you select Stateful (DHCPv6), specify how long (in minutes) the IPv6 addresses
remain valid.
Ta ble 16 Network > WAN > IPv6 (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
61
CHAPTER 7
Wireless LAN
7.1 Overview
This chapter discusses how to configure the wireless network settings in your LTE3301.
See the appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 33 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your LTE3301 is the AP.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
62
7.1.1 What You Can Do
•Use the General screen to turn the wireless connection on or off, set up wireless security
between the LTE3301 and the wireless clients, and make other basic configuration changes
(Section 7.2 on page 64).
•Use the More AP screen to set up multiple wireless networks on your LTE3301 (Section 7.4 on
page 71).
•Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the LTE3301 (Section 7.5 on page 73).
•Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (Section
7.6 on page 75).
•Use the QoS screen to ensure Quality of Service (QoS) in your wireless network (Section 7.7 on
page 76).
•Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually (Section 7.8 on page 76).
•Use the WPS Station screen to add a wireless station using WPS (Section 7.9 on page 78).
•Use the Scheduling screen to set the times your wireless LAN is turned on and off (Section 7.10
on page 78).
•Use the WDS screen to configure the LTE3301’s WDS settings (Section 7.11 on page 79).
7.1.2 What You Should Know
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• If two wireless networks overlap, they should use different channels.
Like radio stations or television channels, each wireless network uses a specific channel, or
frequency, to send and receive information.
• Every wireless client in the same wireless network must use security compatible with the AP.
Security stops unauthorized devices from using the wireless network. It can also protect the
information that is sent in the wireless network.
Wireless Security Overview
The following sections introduce different types of wireless security you can set up in the wireless
network.
SSID
Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the
SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change
the default SSID to something that is difficult to guess.
This type of security is fairly weak, however, because there are ways for unauthorized devices to
get the SSID. In addition, unauthorized devices can still see the information that is sent in the
wireless network.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
63
MAC Address Filter
Every wireless client has a unique identification number, called a MAC address.1 A MAC address is
usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or
00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate User’s
Guide or other documentation.
You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to
use the wireless network. If a wireless client is allowed to use the wireless network, it still has to
have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the
wireless network, it does not matter if it has the correct settings.
This type of security does not protect the information that is sent in the wireless network.
Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized
wireless client. Then, they can use that MAC address to use the wireless network.
User Authentication
You can make every user log in to the wireless network before they can use it. This is called user
authentication. However, every wireless client in the wireless network has to support IEEE 802.1x
to do this.
For wireless networks, there are two typical places to store the user names and passwords for each
user.
• In the AP: this feature is called a local user database or a local database.
• In a RADIUS server: this is a server used in businesses more than in homes.
If your AP does not provide a local user database and if you do not have a RADIUS server, you
cannot set up user names and passwords for your users.
Unauthorized devices can still see the information that is sent in the wireless network, even if they
cannot use the wireless network. Furthermore, there are ways for unauthorized wireless users to
get a valid user name and password. Then, they can use that user name and password to use the
wireless network.
Local user databases also have an additional limitation that is explained in the next section.
Encryption
Wireless networks can use encryption to protect the information that is sent in the wireless
network. Encryption is like a secret code. If you do not know the secret code, you cannot
understand the message.
1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds
of wireless devices might not have MAC addresses.
2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
64
The types of encryption you can choose depend on the type of user authentication. (See page 63
for information about this.)
For example, if the wireless network has a RADIUS server, you can choose WPA or WPA2. If users
do not log in to the wireless network, you can choose no encryption, Static WEP, WPA-PSK, or
WPA2-PSK.
Usually, you should set up the strongest encryption that every wireless client in the wireless
network supports. For example, suppose the AP does not have a local user database, and you do
not have a RADIUS server. Therefore, there is no user authentication. Suppose the wireless network
has two wireless clients. Device A only supports WEP, and device B supports WEP and WPA.
Therefore, you should set up Static WEP in the wireless network.
Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger
encryption. IEEE 802.1x and WEP encryption are better than none at all, but it is
still possible for unauthorized devices to figure out the original information pretty
quickly.
Note: It is not possible to use WPA-PSK, WPA or stronger encryption with a local user
database. In this case, it is better to set up stronger encryption with no
authentication than to set up weaker encryption with the local user database.
When you select WPA2 or WPA2-PSK in your LTE3301, you can also select an option (WPA/WPA-
PSK Compatible) to support WPA/WPA-PSK as well. In this case, if some wireless clients support
WPA and some support WPA2, you should set up WPA2-PSK or WPA2 (depending on the type of
wireless network login) and select the WPA/WPA-PSK Compatible option in the LTE3301.
Many types of encryption use a key to protect the information in the wireless network. The longer
the key, the stronger the encryption. Every wireless client in the wireless network must have the
same key.
WPS
WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS
allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Depending on the devices in your network, you can either press a
button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification
Number) in the devices. Then, they connect and set up a secure network by themselves. See how
to set up a secure wireless network using WPS in the Section 4.2 on page 30.
7.2 General Wireless LAN Screen
Use this screen to configure the SSID and wireless security of the wireless LAN.
Ta ble 17 Types of Encryption for Each Type of Authentication
NO AUTHENTICATION RADIUS SERVER
Weakest No Security WPA
Static WEP
WPA-PSK
Strongest WPA2-PSK WPA2
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
65
Note: If you are configuring the LTE3301 from a computer connected to the wireless LAN
and you change the LTE3301’s SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your computer to match the LTE3301’s new settings.
Click Network > Wireless LAN to open the General screen.
Figure 34 Network > Wireless LAN > General
The following table describes the general wireless LAN labels in this screen.
Ta ble 18 Network > Wireless LAN > General
LABEL DESCRIPTION
Wireless LAN
Status
Select Enable to activate the 2.4GHz wireless LAN. Select Disable to turn it off.
You can also enable or disablethe 2.4GHz wireless LANs by using the WIFI button located
on the back panel of the LTE3301.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels. This option is
only available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select this check box for the LTE3301 to automatically choose the channel with the least
interference. Deselect this check box if you wish to manually select the channel using the
Channel Selection field.
Operating
Channel
This displays the channel the LTE3301 is currently using.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
66
See the rest of this chapter for information on the other labels in this screen.
7.3 Wireless Security
The screen varies depending on what you select in the Security Mode field.
7.3.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Channel Width Select the wireless channel width used by LTE3301.
A standard 20MHz channel offers transfer speeds of up to 144Mbps (2.4GHz) whereas a
40MHz channel uses two standard channels and offers speeds of up to 300Mbps
(2.4GHz).
Because not all devices support 40 MHz channels, select Auto 20/40MHz to allow the
LTE3301 to adjust the channel bandwidth automatically.
40MHz (channel bonding or dual channel) bonds two adjacent radio channels to increase
throughput. The wireless clients must also support 40 MHz. It is often better to use the 20
MHz setting in a location where the environment hinders the wireless signal.
Select 20MHz if you want to lessen radio interference with other wireless devices in your
neighborhood or the wireless clients do not support channel bonding.
802.11 Mode You can select from the following:
•802.11b: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to
associate with the LTE3301. In this mode, all wireless devices can only transmit at the
data rates supported by IEEE 802.11b.
•802.11g: allows IEEE 802.11g compliant WLAN devices to associate with the Device.
IEEE 802.11b compliant WLAN devices can associate with the LTE3301 only when they
use the short preamble type.
•802.11bg: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to
associate with the LTE3301. The LTE3301 adjusts the transmission rate automatically
according to the wireless standard supported by the wireless devices.
•802.11n: allows IEEE 802.11n compliant WLAN devices to associate with the
LTE3301. This can increase transmission rates, although IEEE 802.11b or IEEE
802.11g clients will not be able to connect to the LTE3301.
•802.11gn: allows either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to
associate with the LTE3301. The transmission rate of your LTE3301 might be reduced.
•802.11bgn: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN
devices to associate with the LTE3301. The transmission rate of your LTE3301 might
be reduced.
Security Mode Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a security,
additional options appears in this screen. See Section 7.3 on page 66 for detailed
information on different security modes. Or you can select No Security to allow any
client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Ta ble 18 Network > Wireless LAN > General (continued)
LABEL DESCRIPTION
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
67
Note: If you do not enable any wireless security on your LTE3301, your network is
accessible to any wireless networking device that is within range.
Figure 35 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
7.3.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your LTE3301 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
Select Static WEP from the Security Mode list.
Ta ble 19 Network > Wireless LAN > General: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
68
Figure 36 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Ta ble 20 Network > Wireless LAN > General: Static WEP
LABEL DESCRIPTION
Security Mode Select Static WEP to enable data encryption.
WEP Encryption Select 64-bits or 128-bits.
This dictates the length of the security key that the network is going to use.
Authentication
Method
Select Auto or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to log into
the wireless network. Keep this setting at Auto unless you want to force a key
verification before communication between the wireless client and the LTE3301 occurs.
Select Shared Key to force the clients to provide the WEP key prior to communication.
ASCII Select this option in order to enter ASCII characters as WEP key.
Hex Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
69
7.3.3 WPA-PSK/WPA2-PSK
Select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 37 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the LTE3301 and the wireless stations must
use the same WEP key for data transmission.
If you chose 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Ta ble 20 Network > Wireless LAN > General: Static WEP (continued)
LABEL DESCRIPTION
Ta ble 21 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Security Mode Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK
Compatible
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to
your LTE3301.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
70
7.3.4 WPA/WPA2
Select WPA or WPA2 from the Security Mode list.
Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2
in the Wireless LAN > General screen.
Figure 38 Network > Wireless LAN > General: WPA/WPA2
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer
The Group Key Update Timer is the rate at which the AP sends a new group key out to
all clients.
The default is 3600 seconds (60 minutes).
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Ta ble 21 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK (continued)
LABEL DESCRIPTION
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
71
The following table describes the labels in this screen.
7.4 More AP Screen
This screen allows you to enable and configure multiple wireless networks and guest wireless
network settings on the LTE3301.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the LTE3301.
This allows you to use one access point to provide several BSSs simultaneously. You can then
assign varying security types to different SSIDs. Wireless clients can use different SSIDs to
associate with the same access point.
Click Network > Wireless LAN > More AP. The following screen displays.
Ta ble 22 Network > Wireless LAN > General: WPA/WPA2
LABEL DESCRIPTION
Security Mode Select WPA or WPA2 to enable data encryption.
WPA Compatible This check box is available only when you select WPA2-PSK or WPA2 in the Security
Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the LTE3301 even when the LTE3301 is using WPA2-PSK or WPA2.
Group Key Update
Timer
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is the
WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode.
Authentication Server
IP Address Enter the IP address of the external authentication server in dotted decimal notation.
Port Number Enter the port number of the external authentication server.
You need not change this value unless your network administrator instructs you to do
so with additional information.
Shared Secret Enter a password (up to 127 alphanumeric characters) as the key to be shared
between the external authentication server and the LTE3301.
The key must be the same on the external authentication server and your LTE3301.
The key is not sent over the network.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
72
Figure 39 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
7.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
The following screen displays.
Figure 40 Network > Wireless LAN > More AP: Edit
Ta ble 23 Network > Wireless LAN > More AP
LABEL DESCRIPTION
#This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID An SSID profile is the set of parameters relating to one of the LTE3301’s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the
wireless client utility.
Security This field indicates the security mode of the SSID profile.
Edit Click the Edit icon to configure the SSID profile.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
73
The following table describes the labels in this screen.
7.5 MAC Filter Screen
The MAC filter screen allows you to configure the LTE3301 to give exclusive access to devices
(Allow) or exclude devices from accessing the LTE3301 (Deny). Every Ethernet device has a
unique MAC (Media Access Control) address. The MAC address is assigned at the factory and
consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know
the MAC address of the devices to configure this screen.
To change your LTE3301’s MAC filter settings, click Network > Wireless LAN > MAC Filter. The
screen appears as shown.
Ta ble 24 Network > Wireless LAN > More AP: Edit
LABEL DESCRIPTION
Active Select this to activate the SSID profile.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or
between a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless clients can access the wired network and communicate with each other. When
Intra-BSS is disabled, wireless clients can still access the wired network but cannot
communicate with each other.
WMM QoS Check this to have the LTE3301 automatically give a service a priority level according to the
ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which
makes them run more smoothly.
Security Mode Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a security, additional
options appears in this screen. See Section 7.3 on page 66 for detailed information on
different security modes. Or you can select No Security to allow any client to associate
this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
74
Figure 41 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Ta ble 25 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
MAC Address
Filter
Select to turn on (Enable) or off (Disable) MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the LTE3301, MAC addresses not listed will be denied
access to the LTE3301.
Select Deny to block access to the LTE3301, MAC addresses not listed will be allowed to
access the LTE3301.
MAC Filter Summary
Set This is the index number of the MAC address.
MAC Address Enter the MAC address of the wireless station that are allowed or denied access to the
LTE3301.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
75
7.6 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 42 Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Ta ble 26 Network > Wireless LAN > Advanced
LABEL DESCRIPTION
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/
CTS (Clear To Send) handshake.
This field is not configurable and the LTE3301 automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General
screen.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages.
It is the maximum data fragment size that can be sent.
This field is not configurable and the LTE3301 automatically changes to use the maximum
value if you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General
screen.
Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or
between a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is
enabled, wireless clients can access the wired network and communicate with each other.
When Intra-BSS is disabled, wireless clients can still access the wired network but cannot
communicate with each other.
Green AP Select Enable to reduce the power consumption by adjusting the output power. The
LTE3301 reduces the output power of the transmitter from about 260mA to 188mA when
there is no IEEE 802.11 wireless clients associated with the LTE3301 wireless network.
Tx Power Set the output power of the LTE3301 in this field. If there is a high density of APs in an
area, decrease the output power of the LTE3301 to reduce interference with other APs.
Select one of the following 100%, 90%, 75%, 50%, 25% or 10%.
Beacon Interval When a wirelessly networked device sends a beacon, it includes with it a beacon interval.
This specifies the time period before the device sends the beacon again. The interval tells
receiving devices on the network how long they can wait in low-power mode before
waking up to handle the beacon. A high value helps save current consumption of the
access point.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
76
7.7 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN > QoS. The following screen appears.
Figure 43 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
7.8 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the LTE3301.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Ta ble 26 Network > Wireless LAN > Advanced (continued)
LABEL DESCRIPTION
Ta ble 27 Network > Wireless LAN > QoS
LABEL DESCRIPTION
WMM QoS Select Enable to have the LTE3301 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
This field is not configurable and the LTE3301 automatically enables WMM QoS if you
select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General screen.
Apply Click Apply to save your changes to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
77
Figure 44 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Ta ble 28 Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Code Select Enable and click Apply to allow the PIN Configuration method. If you select
Disable, you cannot create a new PIN number.
PIN Number This is the WPS PIN (Personal Identification Number) of the LTE3301. Enter this PIN in
the configuration utility of the device you want to connect to the LTE3301 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
WPS Status
Status This displays Configured when the LTE3301 has connected to a wireless network using
WPS or when WPS Enable is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the LTE3301 or you click Release Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the LTE3301.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
LTE3301.
SSID This is the name of the wireless network (the LTE3301’s first SSID).
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
78
7.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN > WPS Station tab.
Note: After you click Push Button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Figure 45 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
7.10 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Network > Wireless LAN > Scheduling tab.
Ta ble 29 Network > Wireless LAN > WPS Station
LABEL DESCRIPTION
Push Button Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station’s wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Or input station’s
PIN number
Use this button when you use the PIN Configuration method to configure wireless
station’s wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
79
Figure 46 Network > Wireless LAN > Scheduling
The following table describes the labels in this screen.
7.11 WDS Screen
A Wireless Distribution System (WDS) is a wireless connection between two or more APs. Use this
screen to configure the LTE3301’s WDS settings. To open this screen, click Network > Wireless
LAN > WDS tab.
Ta ble 30 Network > Wireless LAN > Scheduling
LABEL DESCRIPTION
Wireless LAN
Scheduling
Select Enable to activate the wireless LAN scheduling feature. Select Disable to turn it
off.
Policy Select On or Off to specify whether the Wireless LAN is turned on or off. This field works
in conjunction with the Day and For the following times fields.
Scheduling
Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you select
Everyday you can not select any specific days. This field works in conjunction with the
For the following times field.
For the following
times (24-Hour
Format)
Select a begin time using the first set of hour and minute (min) drop down boxes and
select an end time using the second set of hour and minute (min) drop down boxes. If
you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between
the two times you enter in these fields. If you have chosen Off earlier for the WLAN
Status the Wireless LAN will turn off between the two times you enter in these fields.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
80
Figure 47 Network > Wireless LAN > WDS
The following table describes the labels in this screen.
Ta ble 31 Network > Wireless LAN > WDS
LABEL DESCRIPTION
WDS Setup
Basic Setting Select Disable to turn off the WDS function on the LTE3301.
Select AP+Bridge to have the LTE3301 function as a bridge and access point
simultaneously.
Select Bridge Only to have the LTE3301 act as a wireless bridge only.
Local MAC Address This shows the MAC address of the LTE3301.
Phy Mode Select the physical mode supported by the LTE3301.
You must also set the peer device to use the same physical mode.
Remote MAC
Address
Type the MAC address of the peer device in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Security
Encryp Type Select the type of security you want to use (TKIP or AES) to secure traffic on your
WDS. Otherwise, select No Security.
Select TKIP to enable Temporal Key Integrity Protocol (TKIP) security on your WDS.
This option is compatible with other ZyXEL access points that support WDS security. Use
this if the other access points on your network support WDS security but do not have an
AES option.
AES provides superior security to TKIP. Use AES if the other access points on your
network support it for the WDS.
Encryp Key Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces
and symbols).
You must also set the peer device to use the same pre-shared key.
Apply Click Apply to save your changes back to the LTE3301.
Reset Click Reset to reload the previous configuration for this screen.
LTE3301 Series User’s Guide
81
CHAPTER 8
LAN
8.1 Overview
This chapter describes how to configure LAN settings.
A Local Area Network (LAN) is a shared communication system to which many computers are
attached. A LAN is a computer network limited to the immediate area, usually the same building or
floor of a building.
Figure 48 LAN Example
The LAN screens can help you configure a manage IP address, and partition your physical network
into logical networks.
8.2 What You Can Do
•Use the IP screen to change the IP address for your LTE3301 (Section 8.4 on page 82).
8.3 What You Need To Know
The actual physical connection determines whether the LTE3301 ports are LAN or WAN ports. There
are two separate IP networks, one inside the LAN network and the other outside the WAN network
as shown next.
Chapter 8 LAN
LTE3301 Series User’s Guide
82
Figure 49 LAN and WAN IP Addresses
The LAN parameters of the LTE3301 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.
8.4 LAN IP Screen
Use this screen to change the IP address for your LTE3301. Click Network > LAN > IP.
Figure 50 Network > LAN > IP
The following table describes the labels in this screen.
Ta ble 32 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your LTE3301 in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your LTE3301
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
LTE3301.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
LTE3301 Series User’s Guide
83
CHAPTER 9
DHCP Server
9.1 Overview
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the LTE3301’s LAN as a
DHCP server or disable it. When configured as a server, the LTE3301 provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
your LAN, or else the computer must be manually configured.
9.1.1 What You Can Do
•Use the General screen to enable the DHCP server (Section 9.2 on page 83).
•Use the Advanced screen to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses (Section 9.3 on page 85).
•Use the Client List screen to view the current DHCP client information (Section 9.4 on page 87).
9.1.2 What You Need To Know
The following terms and concepts may help as you read through this chapter.
MAC Addresses
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. Find out the MAC addresses of your network devices if you intend to add them
to the DHCP Client List screen.
IP Pool Setup
The LTE3301 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the LTE3301 itself) in the lower
range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for mail,
FTP, TFTP, web, etc., that you may have.
9.2 DHCP Server General Screen
The LTE3301 has built-in DHCP server capability that assigns IP addresses to systems that support
DHCP client capability. Use this screen to enable the DHCP server. Click Network > DHCP Server.
The following screen displays.
Chapter 9 DHCP Server
LTE3301 Series User’s Guide
84
Figure 51 Network > DHCP Server > General
The following table describes the labels in this screen.
Ta ble 33 Network > DHCP Server > General
LABEL DESCRIPTION
DHCP Server Select Enable to activate DHCP for LAN.
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a server.
Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable
to stop the LTE3301 acting as a DHCP server. When configured as a server, the
LTE3301 provides TCP/IP configuration for the clients. If not, DHCP service is disabled
and you must have another DHCP server on your LAN, or else the computers must be
manually configured. When set as a server, fill in the following four fields.
IP Pool Starting
Address
This field specifies the first of the contiguous addresses in the IP address pool for LAN.
Pool Size This field specifies the size, or count of the IP address pool for LAN.
DHCP Relay Select this option to have the LTE3301 forward DHCP requests to the DHCP server.
Chapter 9 DHCP Server
LTE3301 Series User’s Guide
85
9.3 DHCP Server Advanced Screen
This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses. You can also use this screen to configure the DNS server information that the
LTE3301 sends to the DHCP clients.
To change your LTE3301’s static DHCP settings, click Network > DHCP Serve r > Advanced. The
following screen displays.
DHCP Server IP This field is configurable only when you select DHCP Relay.
Enter the IP address of the actual remote DHCP server in this field.
Lease Time This is the period of time DHCP-assigned addresses is used. DHCP automatically
assigns IP addresses to clients when they log in. DHCP centralizes IP address
management on central computers that run the DHCP server program. DHCP leases
addresses, for a period of time, which means that past addresses are “recycled” and
made available for future reassignment to other systems.
VLAN DHCP x Server
This section is configurable only when you create a corresponding VLAN group in the Interface Group
screen.
DHCP Server Select Enable to activate DHCP for the VLAN group.
DHCP IP Address Enter the LAN IP address you want to assign to your LTE3301 in this VLAN group.
First DNS Server
Second DNS Server
Specify the IP addresses up to two DNS servers for the DHCP clients to use.
Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the LTE3301's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right.
Select DNS Relay to have the LTE3301 act as a DNS proxy. The LTE3301's LAN IP
address displays in the field to the right (read-only). The LTE3301 tells the DHCP
clients on the LAN that the LTE3301 itself is the DNS server. When a computer on the
LAN sends a DNS query to the LTE3301, the LTE3301 forwards the query to the
LTE3301's system DNS server (configured in the WAN screen) and relays the
response back to the computer.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Ta ble 33 Network > DHCP Server > General (continued)
LABEL DESCRIPTION
Chapter 9 DHCP Server
LTE3301 Series User’s Guide
86
Figure 52 Network > DHCP Server > Advanced
The following table describes the labels in this screen.
Ta ble 34 Network > DHCP Server > Advanced
LABEL DESCRIPTION
Static DHCP Table
# This is the index number of the static IP table entry (row).
MAC Address Type the MAC address (with colons) of a computer on your LAN.
IP Address Type the LAN IP address of a computer on your LAN.
DNS Server
DNS Servers
Assigned by DHCP
Server
The LTE3301 passes a DNS (Domain Name System) server IP address (in the order you
specify here) to the DHCP clients. The LTE3301 only passes this information to the LAN
DHCP clients when you enable DHCP Server in the General screen. When you disable
DHCP Server, DHCP service is disabled and you must have another DHCP sever on your
LAN, or else the computers must have their DNS server addresses manually configured.
First DNS Server
Second DNS Server
Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the LTE3301's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right.
Select DNS Relay to have the LTE3301 act as a DNS proxy. The LTE3301's LAN IP
address displays in the field to the right (read-only). The LTE3301 tells the DHCP clients
on the LAN that the LTE3301 itself is the DNS server. When a computer on the LAN
sends a DNS query to the LTE3301, the LTE3301 forwards the query to the LTE3301's
system DNS server (configured in the WAN screen) and relays the response back to the
computer.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 9 DHCP Server
LTE3301 Series User’s Guide
87
9.4 DHCP Client List Screen
The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the LTE3301’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking Monitor > DHCP Server.
Figure 53 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Ta ble 35 Network > DHCP Server > Client List
LABEL DESCRIPTION
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb) or
down (a gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to reload the previous configuration for this screen.
LTE3301 Series User’s Guide
88
CHAPTER 10
NAT
10.1 Overview
NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in
a packet. For example, the source address of an outgoing packet, used within one network is
changed to a different IP address known within another network.
The figure below is a simple illustration of a NAT network. You want to assign ports 21-25 to one
FTP, Telnet and SMTP server (A in the example), port 80 to another (B in the example) and assign
a default server IP address of 192.168.1.35 to a third (C in the example).
You assign the LAN IP addresses to the devices (A to D) connected to your LTE3301. The ISP
assigns the WAN IP address. The NAT network appears as a single host on the Internet. All traffic
coming from A to D going out to the Internet use the IP address of the LTE3301, which is
192.168.1.1.
Figure 54 NAT Example
Note: You must create a firewall rule in addition to setting up NAT, to allow traffic from
the WAN to be forwarded through the LTE3301.
10.1.1 What You Can Do
•Use the General screen to enable NAT (Section 10.2 on page 89).
•Use the Port Forw arding screen to set a default server and change your LTE3301’s port
forwarding settings to forward incoming service requests to the server(s) on your local network
(Section 10.3 on page 89).
A: 192.168.1.33
B: 192.168.1.34
C: 192.168.1.35
IP address
192.168.1.1
WANLAN
assigned by ISP
FTP, Telnet, SNMP
Port 80
Ports 21 to 25
Chapter 10 NAT
LTE3301 Series User’s Guide
89
•Use the Port Trigger screen to change your LTE3301’s trigger port settings (Section 10.4 on
page 92).
•Use the ALG screen to enable or disable SIP (VoIP) ALG (Application Layer Gateway) in the
LTE3301 (Section 10.5 on page 93).
10.2 General Screen
Use this screen to enable NAT and set a default server. Click Network > NAT to open the General
screen.
Figure 55 Network > NAT > General
The following table describes the labels in this screen.
10.3 Port Forwarding Screen
Use this screen to forward incoming service requests to the server(s) on your local network and set
a default server. You may enter a single port number or a range of port numbers to be forwarded,
and the local IP address of the desired server. The port number identifies a service; for example,
web service is on port 80 and FTP on port 21. In some cases, such as for unknown services or
where one server can support more than one service (for example both FTP and web service), it
might be better to specify a range of port numbers.
Ta ble 36 Network > NAT > General
LABEL DESCRIPTION
Network Address
Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network (for example a private IP address used in a local
network) to a different IP address known within another network (for example a public
IP address used on the Internet).
Select Enable to activate NAT. Select Disable to turn it off.
NAT Loopback NAT loopback allows local users to use a domain name to access a server on the local
network. A packet sent to the public (WAN) IP address is always forwarded to the
default gateway (the LTE3301). With NAT loopback enabled, the LTE3301 uses the WAN
interface’s IP address as the packet’s source address and treats the packet as if it came
from the WAN interface. The packet then can be forwarded to the local server according
to the port forwarding rule.
Select Enable to activate NAT loopback. Select Disable to turn it off.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 10 NAT
LTE3301 Series User’s Guide
90
In addition to the servers for specified services, NAT supports a default server. A service request
that does not have a server explicitly designated for it is forwarded to the default server. If the
default is not defined, the service request is simply discarded.
Note: Many residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP may
periodically check for servers and may suspend your account if it discovers any
active services at your location. If you are unsure, refer to your ISP.
Port forwarding allows you to define the local servers to which the incoming services will be
forwarded. To change your LTE3301’s port forwarding settings, click Network > NAT > Port
Forwarding. The screen appears as shown.
Note: If you do not assign a Default Server, the LTE3301 discards all packets received
for ports that are not specified in this screen or remote management.
Refer to Appendix C on page 174 for port numbers commonly used for particular services.
Figure 56 Network > NAT > Port Forwarding
The following table describes the labels in this screen.
Ta ble 37 Network > NAT > Port Forwarding
LABEL DESCRIPTION
Default Server Setup
Default Server In addition to the servers for specified services, NAT supports a default server. A default
server receives packets from ports that are not specified in the Port Forwarding
screen. You can decide whether you want to use the default server or specify a server
manually.
Select this to use the default server.
Change to Server Select this and manually enter the server’s IP address.
Chapter 10 NAT
LTE3301 Series User’s Guide
91
10.3.1 Port Forwarding Edit Screen
This screen lets you edit a port forwarding rule. Click a rule’s Edit icon in the Port Forwarding
screen to open the following screen.
Service Name Select a pre-defined service from the drop-down list box. The pre-defined service port
number(s) and protocol will be displayed in the port forwarding summary table.
Otherwise, select User define to manually enter the service name and port number(s)
and select the IP protocol.
Service Protocol Select the transport layer protocol supported by this virtual server. Choices are TCP,
UDP, or TCP_UDP.
If you have chosen a pre-defined service in the Service Name field, the protocol will be
configured automatically.
WAN Interface Select the WAN interface on which the matched packets are received.
Port Range Specify the first and last external port numbers that identify the service.
If you have chosen a pre-defined service in the Servic e Name field, the port number(s)
will be configured automatically.
Translation Port
Range
Specify the first and last internal port numbers that identify the service.
If you have chosen a pre-defined service in the Servic e Name field, the port number(s)
will be configured automatically.
Server IP Address Enter the inside IP address of the virtual server here and click Add to add it in the port
forwarding summary table.
#This is the number of an individual port forwarding server entry.
Status This icon is turned on when the rule is enabled.
Name This field displays a name to identify this rule.
Protocol This is the transport layer protocol used for the service.
WAN Interface This field displays the WAN interface on which the matched packets are received.
Port This field displays the port number(s).
Port This field displays the external port number(s) that identifies the service.
Translation Port This field displays the internal port number(s) that identifies the service.
Server IP Address This field displays the inside IP address of the server.
Modify Click the Edit icon to open the edit screen where you can modify an existing rule.
Click the Delete icon to remove a rule.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Ta ble 37 Network > NAT > Port Forwarding (continued)
LABEL DESCRIPTION
Chapter 10 NAT
LTE3301 Series User’s Guide
92
Figure 57 Network > NAT > Port Forwarding Edit
The following table describes the labels in this screen.
10.4 Port Trigger Screen
To change your LTE3301’s trigger port settings, click Network > NAT > Port Trigger. The screen
appears as shown.
Note: Only one LAN computer can use a trigger port (range) at a time.
Ta ble 38 Network > NAT > Port Forwarding Edit
LABEL DESCRIPTION
Port Forwarding Select Enable to turn on this rule and the requested service can be forwarded to the host
with a specified internal IP address.
Select Disable to disallow forwarding of these ports to an inside server without having to
delete the entry.
Service Name Select User define and type a name (of up to 31 printable characters) to identify this rule
in the first field next to Service Name. Otherwise, select a predefined service in the
second field next to Service Name. The predefined service name and port number(s) will
display in the Service Name and Port Range fields.
Service Protocol Select the transport layer protocol supported by this virtual server. Choices are TCP, UDP,
or TCP_UDP.
If you have chosen a pre-defined service in the Service Name field, the protocol will be
configured automatically.
WAN Interface Select the WAN interface on which the matched packets are received.
Port Range Type a port number(s) to define the service to be forwarded to the specified server.
To specify a range of ports, enter the first number and the last number of the range.
Translation Port
Range
Enter a port number to which you want the incoming ports translated.
For a range of ports, enter the first number and the last number of the range.
Server IP
Address
Type the IP address of the server on your LAN that receives packets from the port(s)
specified in the Port Range field.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 10 NAT
LTE3301 Series User’s Guide
93
Figure 58 Network > NAT > Port Trigger
The following table describes the labels in this screen.
10.5 ALG Screen
Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows SIP calls
to pass through NAT by examining and translating IP addresses embedded in the data stream.
When the LTE3301 registers with the SIP register server, the SIP ALG translates the LTE3301’s
private IP address inside the SIP data stream to a public IP address. You do not need to use STUN
or an outbound proxy if your LTE3301 is behind a SIP ALG
Ta ble 39 Network > NAT > Port Trigger
LABEL DESCRIPTION
#This is the rule index number (read-only).
Name Type a unique name (up to 15 characters) for identification purposes. All characters are
permitted - including spaces.
WAN Interface Select the WAN interface through which the matched packets are transmitted.
Incoming Port Incoming Port is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The LTE3301 forwards the traffic with this port (or range of ports)
to the client computer on the LAN that requested the service.
Start Port Type a port number or the starting port number in a range of port numbers.
End Port Type a port number or the ending port number in a range of port numbers.
Trigger Port The trigger port is a port that causes (or triggers) the LTE3301 to record the IP address of
the LAN computer that sent the traffic to a server on the WAN.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 10 NAT
LTE3301 Series User’s Guide
94
To enable and disable the SIP ALG in the LTE3301, click Network > NAT > ALG. The screen
appears as shown.
Figure 59 Network > NAT > ALG
The following table describes the labels in this screen.
10.6 Technical Reference
The following section contains additional technical information about the LTE3301 features
described in this chapter.
10.6.1 NATPort Forwarding: Services and Port Numbers
A port forwarding set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP,
that you can make accessible to the outside world even though NAT makes your whole inside
network appear as a single machine to the outside world.
Use the Port Forwarding screen to forward incoming service requests to the server(s) on your
local network. You may enter a single port number or a range of port numbers to be forwarded, and
the local IP address of the desired server. The port number identifies a service; for example, web
service is on port 80 and FTP on port 21. In some cases, such as for unknown services or where one
server can support more than one service (for example both FTP and web service), it might be
better to specify a range of port numbers.
In addition to the servers for specified services, NAT supports a default server. A service request
that does not have a server explicitly designated for it is forwarded to the default server. If the
default is not defined, the service request is simply discarded.
Note: Many residential broadband ISP accounts do not allow you to run any server
processes (such as a Web or FTP server) from your location. Your ISP may
periodically check for servers and may suspend your account if it discovers any
active services at your location. If you are unsure, refer to your ISP.
Ta ble 40 Network > NAT > ALG
LABEL DESCRIPTION
ALG-SIP Select Enable to make sure SIP (VoIP) works correctly with port-forwarding and
address-mapping rules. Otherwise, select Disable to turn off the SIP ALG.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 10 NAT
LTE3301 Series User’s Guide
95
10.6.2 NAT Port Forwarding Example
Let's say you want to assign ports 21-25 to one FTP, Telnet and SMTP server (A in the example),
port 80 to another (B in the example) and assign a default server IP address of 192.168.1.35 to a
third (C in the example). You assign the LAN IP addresses and the ISP assigns the WAN IP address.
The NAT network appears as a single host on the Internet.
Figure 60 Multiple Servers Behind NAT Example
10.6.3 Trigger Port Forwarding
Some services use a dedicated range of ports on the client side and a dedicated range of ports on
the server side. With regular port forwarding you set a forwarding port in NAT to forward a service
(coming in from the server on the WAN) to the IP address of a computer on the client side (LAN).
The problem is that port forwarding only forwards a service to a single LAN IP address. In order to
use the same service on a different LAN computer, you have to manually replace the LAN
computer's IP address in the forwarding port with another LAN computer's IP address.
Trigger port forwarding solves this problem by allowing computers on the LAN to dynamically take
turns using the service. The LTE3301 records the IP address of a LAN computer that sends traffic to
the WAN to request a service with a specific port number and protocol (a "trigger" port). When the
LTE3301's WAN port receives a response with a specific port number and protocol ("incoming"
port), the LTE3301 forwards the traffic to the LAN IP address of the computer that sent the request.
After that computer’s connection for that service closes, another computer on the LAN can use the
service in the same manner. This way you do not need to configure a new IP address each time you
want a different LAN computer to use the application.
10.6.4 Trigger Port Forwarding Example
The following is an example of trigger port forwarding.
Chapter 10 NAT
LTE3301 Series User’s Guide
96
Figure 61 Trigger Port Forwarding Process: Example
1Jane requests a file from the Real Audio server (port 7070).
2Port 7070 is a “trigger” port and causes the LTE3301 to record Jane’s computer IP address. The
LTE3301 associates Jane's computer IP address with the "incoming" port range of 6970-7170.
3The Real Audio server responds using a port number ranging between 6970-7170.
4The LTE3301 forwards the traffic to Jane’s computer IP address.
5Only Jane can connect to the Real Audio server until the connection is closed or times out. The
LTE3301 times out in three minutes with UDP (User Datagram Protocol), or two hours with TCP/IP
(Transfer Control Protocol/Internet Protocol).
10.6.5 Two Points To Remember About Trigger Ports
1Trigger events only happen on data that is coming from inside the LTE3301 and going to the
outside.
2If an application needs a continuous data stream, that port (range) will be tied up so that another
computer on the LAN can’t trigger it.
Jane’s computer
Real Audio Server
Port 7070
LTE3301 Series User’s Guide
97
CHAPTER 11
DDNS
11.1 Overview
Dynamic Domain Name Service (DDNS) services let you use a fixed domain name with a dynamic
IP address. Users can always use the same domain name instead of a different dynamic IP address
that changes each time to connect to the LTE3301 or a server in your network.
Note: The LTE3301 must have a public global IP address and you should have your
registered DDNS account information on hand.
11.2 General
To change your LTE3301’s DDNS, click Network > DDNS. The screen appears as shown.
Figure 62 Dynamic DNS
The following table describes the labels in this screen.
Ta ble 41 Dynamic DNS
LABEL DESCRIPTION
IPv4 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Service Provider Select the name of your Dynamic DNS service provider.
Chapter 11 DDNS
LTE3301 Series User’s Guide
98
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
“yourhost.mydomain.net”. You can specify up to two host names in the field
separated by a comma (",").
Username Enter your user name.
Password Enter the password assigned to you.
IPv6 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Service Provider Select the name of your Dynamic DNS service provider.
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
“yourhost.mydomain.net”. You can specify up to two host names in the field
separated by a comma (",").
Token This is the token authentication provided by the hosting provider (i.e. FreeDDNS).
When the host name is registered, the hosting server provides the token identifier.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Ta ble 41 Dynamic DNS (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
99
CHAPTER 12
Routing
12.1 Overview
This chapter shows you how to configure static routes for your LTE3301.
The LTE3301 usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the LTE3301 send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (A) connected to the LTE3301’s LAN interface. The
LTE3301 routes most traffic from A to the Internet through the LTE3301’s default gateway (R1).
You create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 63 Example of Static Routing Topology
12.2 Static Route Screen
Click Network > Routing > Static Route to open the Static Route screen.
WAN
R1
R2
A
R3
LAN
Chapter 12 Routing
LTE3301 Series User’s Guide
100
Figure 64 Network > Routing > Static Route
The following table describes the labels in this screen.
12.2.1 Add/Edit Static Route
Click the Add Static Route button or a rule’s Edit icon in the Static Route screen. Use this screen
to configure the required information for a static route.
Figure 65 Network > Routing > Static Route: Add/Edit
The following table describes the labels in this screen.
Ta ble 42 Network > Routing > Static Route
LABEL DESCRIPTION
Add Static Route Click this to create a new rule.
#This is the number of an individual static route.
Status This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Destination This parameter specifies the IP network address of the final destination. Routing is always
based on network number.
Subnet Mask This parameter specifies the IP network subnet mask of the final destination.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Modify Click the Edit icon to open a screen where you can modify an existing rule.
Click the Delete icon to remove a rule from the LTE3301.
Ta ble 43 Network > Routing > Static Route: Add/Edit
LABEL DESCRIPTION
Static Route Select to enable or disable this rule.
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
Chapter 12 Routing
LTE3301 Series User’s Guide
101
12.3 Dynamic Routing Screen
Use this screen to enable and configure RIP on the LTE3301. Click Network > Routing >
Dynamic Routing to open the Dynamic Routing screen.
Figure 66 Network > Routing > Dynamic Routing
The following table describes the labels in this screen.
IP Subnet Mask Enter the IP subnet mask here.
Gateway IP
Address
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
same segment as your LTE3301's interface(s). The gateway helps forward packets to their
destinations.
Back Click Back to return to the previous screen without saving.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to set every field in this screen to its last-saved value.
Ta ble 43 Network > Routing > Static Route: Add/Edit
LABEL DESCRIPTION
Ta ble 44 Network > Routing > Dynamic Routing
LABEL DESCRIPTION
Dynamic Routing RIP (Routing Information Protocol) allows a router to exchange routing information with
other routers. The RIP version controls the format and the broadcasting method of the RIP
packets that the LTE3301 sends (it recognizes both formats when receiving). RIP version
1 is universally supported but RIP version 2 carries more information. RIP version 1 is
probably adequate for most networks, unless you have an unusual network topology.
Select the RIP version from RIPv1 and RIPv2. Otherwise, select Disable to turn if off.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
LTE3301 Series User’s Guide
102
CHAPTER 13
Interface Group
13.1 Overview
By default, the four LAN interfaces on the LTE3301 are in the same group and can communicate
with each other. Creating a new interface will create a new LAN bridge interface (subnet) (for
example, 192.168.2.0/24) that acts as a dependent LAN network, and is a different subnet from
default LAN subnet (192.168.1.0/24).
13.2 Interface Group Screen
You can manually add a LAN/WLAN interface to a new group.
Use the DHCP screen to configure the private IP addresses the DHCP server on the LTE3301
assigns to the clients in the default and/or user-defined groups. See Chapter 9 on page 83 for more
information.
Use the Interface Group screen to create a new interface group, which is a new LAN bridge
interface (subnet). Click Network > Interface Group to open the following screen.
Figure 67 Network > Interface Group
The following table describes the fields in this screen.
Ta ble 45 Network > Interface Group
LABEL DESCRIPTION
Add Click this button to create a new interface group.
Name This shows the descriptive name of the group.
LAN Interface This shows the interface group.
VID This shows the VLAN ID number (from 0 to 4094) of the interface group.
Modify Click the Delete icon to remove the user-defined group.
Chapter 13 Interface Group
LTE3301 Series User’s Guide
103
13.2.1 Interface Group > Add Screen
Click the Add button in the Interface Group screen to open the following screen. Use this screen
to create a new interface group.
Note: An interface can belong to only one group at a time.
Figure 68 Network > Interface Group > Add
The following table describes the fields in this screen.
Ta ble 46 Network > Interface Group > Add
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (-) and underscores (_). Spaces are not allowed.
Enable Tx TAG Click the check box to set the port to tag or not to tag all outgoing traffic with the VLAN ID.
VID This shows the VLAN ID number (from 0 to 4094) for traffic through the interfaces in this
group.
This field is not configurable and the VLAN ID is assigned automatically by the system.
Grouped LAN
Interfaces
This shows the LAN port(s) or WLAN interface(s) as a member of the VLAN interface group.
Select any interfaces that you don’t want and click the right arrow button to remove them
from this group.
Available LAN
Interfaces
This shows the available LAN interface(s) (Ethernet LAN or Wireless LAN) that can be
selected to form a VLAN interface group.
Select the interfaces that you want and click the left arrow button to add them to this group.
Back Click Back to quit and return to the previous screen.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to exit this screen without saving.
LTE3301 Series User’s Guide
104
CHAPTER 14
Firewall
14.1 Overview
Use these screens to enable and configure the firewall that protects your LTE3301 and your LAN
from unwanted or malicious traffic.
Enable the firewall to protect your LAN computers from attacks by hackers on the Internet and
control access between the LAN and WAN. By default the firewall:
• allows traffic that originates from your LAN computers to go to all of the networks.
• blocks traffic that originates on the other networks from going to the LAN.
The following figure illustrates the default firewall action. User A can initiate an IM (Instant
Messaging) session from the LAN to the WAN (1). Return traffic for this session is also allowed (2).
However other traffic initiated from the WAN is blocked (3 and 4).
Figure 69 Default Firewall Action
14.1.1 What You Can Do
•Use the General screen to enable or disable the LTE3301’s firewall (Section 14.2 on page 105).
•Use the Services screen enable service blocking, enter/delete/modify the services you want to
block and the date/time you want to block them (Section 14.3 on page 106).
14.1.2 What You Need To Know
The following terms and concepts may help as you read through this chapter.
WAN
LAN
3
4
1
2
A
Chapter 14 Firewall
LTE3301 Series User’s Guide
105
About the LTE3301 Firewall
The LTE3301’s firewall feature physically separates the LAN and the WAN and acts as a secure
gateway for all data passing between the networks.
It is a stateful inspection firewall and is designed to protect against Denial of Service attacks when
activated (click the General tab under Firewall and then click the Enable Firewall check box).
The LTE3301's purpose is to allow a private Local Area Network (LAN) to be securely connected to
the Internet. The LTE3301 can be used to prevent theft, destruction and modification of data, as
well as log events, which may be important to the security of your network.
The LTE3301 is installed between the LAN and a broadband modem connecting to the Internet. This
allows it to act as a secure gateway for all data passing between the Internet and the LAN.
The LTE3301 has one Ethernet WAN port and four Ethernet LAN ports, which are used to physically
separate the network into two areas.The WAN (Wide Area Network) port attaches to the broadband
(cable or DSL) modem to the Internet.
The LAN (Local Area Network) port attaches to a network of computers, which needs security from
the outside world. These computers will have access to Internet services such as e-mail, FTP and
the World Wide Web. However, "inbound access" is not allowed (by default) unless the remote host
is authorized to use a specific service.
Guidelines For Enhancing Security With Your Firewall
1Change the default password via Web Configurator.
2Think about access control before you connect to the network in any way, including attaching a
modem to the port.
3Limit who can access your router.
4Don't enable any local service (such as NTP) that you don't use. Any enabled service could present
a potential security risk. A determined hacker might be able to find creative ways to misuse the
enabled services to access the firewall or the network.
5For local services that are enabled, protect against misuse. Protect by configuring the services to
communicate only with specific peers, and protect by configuring rules to block packets for the
services at specific interfaces.
6Protect against IP spoofing by making sure the firewall is active.
7Keep the firewall in a secured (locked) room.
14.2 General Screen
Use this screen to enable or disable the LTE3301’s firewall, and set up firewall logs. Click Security
> Firewall to open the General screen.
Chapter 14 Firewall
LTE3301 Series User’s Guide
106
Figure 70 Security > Firewall > General l
The following table describes the labels in this screen.
14.3 Services Screen
If an outside user attempts to probe an unsupported port on your LTE3301, an ICMP response
packet is automatically returned. This allows the outside user to know the LTE3301 exists. Use this
screen to prevent the ICMP response packet from being sent. This keeps outsiders from discovering
your LTE3301 when unsupported ports are probed.
You can also use this screen to enable service blocking, enter/delete/modify the services you want
to block and the date/time you want to block them.
Click Security > Firewall > Services. The screen appears as shown next.
Ta ble 47 Security > Firewall > General
LABEL DESCRIPTION
Enable Firewall Select this check box to activate the firewall. The LTE3301 performs access control and
protects against Denial of Service (DoS) attacks when the firewall is activated.
Apply Click Apply to save the settings.
Cancel Click Cancel to start configuring this screen again.
Chapter 14 Firewall
LTE3301 Series User’s Guide
107
Figure 71 Security > Firewall > Services l
The following table describes the labels in this screen.
Ta ble 48 Security > Firewall > Services
LABEL DESCRIPTION
ICMP Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly apparent
to the application user.
Respond to Ping
on
The LTE3301 will not respond to any incoming Ping requests when Disable is selected.
Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming WAN
Ping requests. Otherwise select LAN&WAN to reply to all incoming LAN and WAN Ping
requests.
Apply Click Apply to save the settings.
WAN Stealth Mode
Enable WAN
Stealth Mode
Select this check box to silently discard the matched packets without sending a TCP reset
packet or an ICMP destination-unreachable message to the sender.
Apply Click Apply to save the settings.
Enable Firewall Rule
Enable Firewall
Rule
Select this check box to activate the firewall rules that you define (see Add Firewall Rule
below).
Apply Click Apply to save the settings.
Add Firewall Rule
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.
Chapter 14 Firewall
LTE3301 Series User’s Guide
108
See Appendix C on page 174 for commonly used services and port numbers.
Dest IP Address Enter the IP address of the computer to which traffic for the application or service is
entering.
The LTE3301 applies the firewall rule to traffic initiating from this computer.
Source IP Address Enter the IP address of the computer that initializes traffic for the application or service.
The LTE3301 applies the firewall rule to traffic initiating from this computer.
Protocol Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you want
to apply the firewall rule.
Dest Port Range Enter the port number/range of the destination that define the traffic type, for example
TCP port 80 defines web traffic.
Source Port
Range
Enter the port number/range of the source that define the traffic type, for example TCP
port 80 defines web traffic.
Add Rule Click Add to save the firewall rule.
Firewall Rule
#This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn.
Service Name This is a name that identifies or describes the firewall rule.
MAC address This is the MAC address of the computer for which the firewall rule applies.
Dest IP This is the IP address of the computer to which traffic for the application or service is
entering.
Source IP This is the IP address of the computer from which traffic for the application or service is
initialized.
Protocol This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you want
to apply the firewall rule.
Dest Port Range This is the port number/range of the destination that define the traffic type, for example
TCP port 80 defines web traffic.
Source Port
Range
This is the port number/range of the source that define the traffic type, for example TCP
port 80 defines web traffic.
Action DROP - Traffic matching the conditions of the firewall rule are stopped.
Delete Click Delete to remove the firewall rule.
Cancel Click Cancel to start configuring this screen again.
Ta ble 48 Security > Firewall > Services (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
109
CHAPTER 15
Content Filtering
15.1 Overview
This chapter shows you how to configure content filtering. Content filtering is the ability to block
certain web features and specific URLs.
Keyword Blocking URL Checking
The LTE3301 checks the URL’s domain name (or IP address) and file path separately when
performing keyword blocking.
The URL’s domain name or IP address is the characters that come before the first slash in the URL.
For example, with the URL www.zyxel.com.tw/news/pressroom.php, the domain name is
www.zyxel.com.tw.
The file path is the characters that come after the first slash in the URL. For example, with the URL
www.zyxel.com.tw/news/pressroom.php, the file path is news/pressroom.php.
Since the LTE3301 checks the URL’s domain name (or IP address) and file path separately, it will not
find items that go across the two. For example, with the URL www.zyxel.com.tw/news/
pressroom.php, the LTE3301 would find “tw” in the domain name (www.zyxel.com.tw). It would
also find “news” in the file path (news/pressroom.php) but it would not find “tw/news”.
15.2 Content Filter
Use this screen to restrict web features, and designate a trusted computer. You can also use this
screen to configure URL filtering settings to block the users on your network from accessing certain
web sites. Click Security > Content Filter to open the Content Filter screen.
Chapter 15 Content Filtering
LTE3301 Series User’s Guide
110
Figure 72 Security > Content Filter
The following table describes the labels in this screen.
Ta ble 49 Security > Content Filter
LABEL DESCRIPTION
Trusted IP Setup To enable this feature, type an IP address of any one of the computers in your network
that you want to have as a trusted computer. This allows the trusted computer to have
full access to all features that are configured to be blocked by content filtering.
Leave this field blank to have no trusted computers.
Restrict Web
Features
Select the box(es) to restrict a feature. When you download a page containing a
restricted feature, that part of the web page will appear blank or grayed out.
ActiveX A tool for building dynamic and active Web pages and distributed object applications.
When you visit an ActiveX Web site, ActiveX controls are downloaded to your browser,
where they remain in case you visit the site again.
Java A programming language and development environment for building downloadable Web
components or Internet and intranet business applications of all kinds.
Cookies Used by Web servers to track usage and provide service based on ID.
Web Proxy A server that acts as an intermediary between a user and the Internet to provide
security, administrative control, and caching service. When a proxy server is located on
the WAN it is possible for LAN users to circumvent content filtering by pointing to this
proxy server.
Enable URL
Keyword Blocking
The LTE3301 can block Web sites with URLs that contain certain keywords in the domain
name or IP address. For example, if the keyword "bad" was enabled, all sites containing
this keyword in the domain name or IP address will be blocked, e.g., URL http://
www.website.com/bad.html would be blocked. Select this check box to enable this
feature.
Keyword Type a keyword in this field. You may use any character (up to 64 characters). Wildcards
are not allowed. You can also enter a numerical IP address.
Keyword List This list displays the keywords already added.
Chapter 15 Content Filtering
LTE3301 Series User’s Guide
111
Add Click Add after you have typed a keyword.
Repeat this procedure to add other keywords. Up to 64 keywords are allowed.
When you try to access a web page containing a keyword, you will get a message telling
you that the content filter is blocking this request.
Delete Highlight a keyword in the lower box and click Delete to remove it. The keyword
disappears from the text box after you click Apply.
Clear All Click this button to remove all of the listed keywords.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh
Ta ble 49 Security > Content Filter (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
112
CHAPTER 16
IPv6 Firewall
16.1 Overview
This chapter shows you how to enable and create IPv6 firewall rules to block unwanted IPv6 traffic.
16.2 IPv6 Firewall Screen
Click Configuration > Security > IPv6 Firewall. The Service screen appears as shown.
Figure 73 Configuration > Security > IPv6 Firewall
The following table describes the labels in this screen.
Ta ble 50 Configuration > Security > IPv6 Firewall
LABEL DESCRIPTION
Enable Firewall Rule
Enable Firewall Rule Select this check box to activate the firewall rules that you define (see Add Firewall
Rule below).
Apply Click Apply to save the settings.
Add Firewall Rule
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.
Chapter 16 IPv6 Firewall
LTE3301 Series User’s Guide
113
Dest IP Address Enter the IPv6 address of the computer to which traffic for the application or service is
entering.
The LTE3301 applies the firewall rule to traffic destined for this computer.
Source IP Address Enter the IPv6 address of the computer that initializes traffic for the application or
service.
The LTE3301 applies the firewall rule to traffic initiating from this computer.
Protocol Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you
want to apply the firewall rule.
Dest Port Range Enter the port number/range of the destination that defines the traffic type, for
example TCP port 80 defines web traffic.
Source Port Range Enter the port number/range of the source that defines the traffic type, for example
TCP port 80 defines web traffic.
Add Rule Click Add Rule to save the firewall rule.
Firewall Rule
#This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn.
ServiceName This is a name that identifies or describes the firewall rule.
MACaddress This is the MAC address of the computer for which the firewall rule applies.
DestIP This is the IP address of the computer to which traffic for the application or service is
entering.
SourceIP This is the IP address of the computer to which traffic for the application or service is
initialized.
Protocol This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you
want to apply the firewall rule.
DestPortRange This is the port number/range of the destination that defines the traffic type, for
example TCP port 80 defines web traffic.
SourcePortRange This is the port number/range of the source that defines the traffic type, for example
TCP port 80 defines web traffic.
Action DROP - Traffic matching the conditions of the firewall rule is stopped.
Delete Click Delete to remove the firewall rule.
Cancel Click Cancel to restore your previously saved settings.
Ta ble 50 Configuration > Security > IPv6 Firewall (continued)
LABEL DESCRIPTION
LTE3301 Series User’s Guide
114
CHAPTER 17
Bandwidth Management
17.1 Overview
This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL’s Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
Figure 74 Bandwidth Management Example
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).
17.2 What You Can Do
•Use the General screen to enable bandwidth management and assign bandwidth values (Section
17.4 on page 115).
•Use the Advanced screen to configure bandwidth managements rule for the services and
applications (Section 17.5 on page 116).
AB
-> VOIP
-> FTP
-> HTTP
-> Chat, Email
Chapter 17 Bandwidth Management
LTE3301 Series User’s Guide
115
17.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the upstream bandwidth that you configure in the Bandwidth
Management > General screen (Section 17.5 on page 116).
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN)
must be less than or equal to the downstream bandwidth that you configure in the Bandwidth
Management > General screen Section 17.5 on page 116.
17.4 General Screen
Use this screen to have the LTE3301 apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management General screen.
Figure 75 Management > Bandwidth Management > General
The following table describes the labels in this screen.
Ta ble 51 Management > Bandwidth Management > General
LABEL DESCRIPTION
Enable Bandwidth
Management
This field allows you to have LTE3301 apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule priority
over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or minimum
amounts of bandwidth that can be used by traffic that matches a bandwidth rule.
Bandwidth of
Upstream
Specify the total amount of bandwidth that you want to dedicate to uplink traffic. The
recommendation is to set this to match the actual upstream data rate.
This is traffic from LAN/WLAN to WAN.
Bandwidth of
Downstream
Specify the total amount of bandwidth that you want to dedicate to downlink traffic. The
recommendation is to set this to match the actual downstream data rate.
This is traffic from WAN to LAN/WLAN.
Flexible Bandwidth
Management
Select Enable to use up to 100% of the configured bandwidth. If you select Disable,
you can only use up to 33% of the configured bandwidth.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 17 Bandwidth Management
LTE3301 Series User’s Guide
116
17.5 Advanced Screen
Use this screen to configure bandwidth management rules for the pre-defined services or
applications.
You can also use this screen to configure bandwidth management rule for other services or
applications that are not on the pre-defined list of LTE3301. Additionally, you can define the IP
addresses and port for a service or application.
Click Management > Bandwidth MGMT > Advanced to open the bandwidth management
Advanced screen.
Figure 76 Management > Bandwidth Management > Advanced
The following table describes the labels in this screen.
17.5.1 Add Bandwidth management Rule
If you want to create a new bandwidth management rule for a service or application, click the Add
New Rule icon in the Advanced screen. The following screen displays.
Ta ble 52 Management > Bandwidth Management > Advanced
LABEL DESCRIPTION
Add New Rule Click this to open a screen where you can create a new bandwidth management rule for a
service or application.
#This is the number of an individual bandwidth management rule.
Status This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
Grouping This field displays the IP address or a range of IP addresses of the destination computer
for whom this rule applies.
Service This field displays the protocol and port used for the service.
Control This field displays whether the maximum/minimum bandwidth allowed or a priority level
is specified in the rule.
Direction These read-only labels represent the physical interfaces. Bandwidth management applies
to all traffic flowing out of the router through the interface, regardless of the traffic’s
source.
Modify Click the remove icon to delete the rule.
Restart Click this button to begin configuring this screen afresh.
Reset QoS Rule Click this button to remove all bandwidth management rules.
Chapter 17 Bandwidth Management
LTE3301 Series User’s Guide
117
Figure 77 Bandwidth Management Rule Configuration: Application List
The following table describes the labels in this screen.
See Appendix C on page 174 for commonly used services and port numbers.
Ta ble 53 Bandwidth Management Rule Configuration: Application List
LABEL DESCRIPTION
Rule Select Enable to turn on the bandwidth management rule. Otherwise, select Disable.
IP Address Enter the IP address or a range of IP addresses of the destination computer for whom
this rule applies.
Service Select Service Port and manually enter the port number(s) that defines the traffic type,
for example TCP port 80 defines web traffic.
Select Pre-defined Applic ation profiles to configure a bandwidth management rule
for a pre-defined service or application.
Protocol If you set Service to Service Port, select the protocol (TCP, or UDP) used for the
service.
Service Type If you set Service to Pre-defined Application profiles, select the name of the service
to which the LTE3301 applies the bandwidth management rule.
Control Select Maximum Bandwidth or Minimum Bandwidth and specify the maximum or
minimum bandwidth allowed for the rule in KBps (kilobytes per second) or MBps
(megabytes per second).
Otherwise, select Priority and enter a priority level (from 1 to 7) for traffic that matches
this rule.
Direction Select To LAN&WLAN to apply the rule to traffic from WAN to LAN and WLAN.
Select To WAN to apply the rule to traffic from LAN/WLAN to WAN.
Select Both to apply the rule to traffic traveling in either direction.
Sharing Method This field is available only when you set Control to Maximum Bandwidth or Minimum
Bandwidth.
Select Grouping to
Select Single to
Apply Click Apply to save your customized settings.
Cancel Click Cancel to exit this screen without saving.
LTE3301 Series User’s Guide
118
CHAPTER 18
Universal Plug-and-Play (UPnP)
18.1 Overview
This chapter introduces the UPnP feature in the web configurator.
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
18.2 What You Need to Know
UPnP hardware is identified as an icon in the Network Connections folder (Windows XP). Each UPnP
compatible device installed on your network will appear as a separate icon. Selecting the icon of a
UPnP device will allow you to access the information and properties of that device.
18.2.1 NAT Traversal
UPnP NAT traversal automates the process of allowing an application to operate through NAT. UPnP
network devices can automatically configure network addressing, announce their presence in the
network to other UPnP devices and enable exchange of simple product and service descriptions.
NAT traversal allows the following:
• Dynamic port mapping
• Learning public IP addresses
• Assigning lease times to mappings
Windows Messenger is an example of an application that supports NAT traversal and UPnP.
See the NAT chapter for more information on NAT.
18.2.2 Cautions with UPnP
The automated nature of NAT traversal applications in establishing their own services and opening
firewall ports may present network security issues. Network information and configuration may also
be obtained and modified by users in some network environments.
When a UPnP device joins a network, it announces its presence with a multicast message. For
security reasons, the LTE3301 allows multicast messages on the LAN only.
Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
119
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
18.3 UPnP Screen
Use this screen to enable UPnP on your LTE3301.
Click Management > UPnP to display the screen shown next.
Figure 78 Management > UPnP
The following table describes the fields in this screen.
18.4 Technical Reference
The sections show examples of using UPnP.
18.4.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the LTE3301.
Make sure the computer is connected to a LAN port of the LTE3301. Turn on your computer and the
LTE3301.
18.4.1.1 Auto-discover Your UPnP-enabled Network Device
1Click start and Control Panel. Double-click Network Connections. An icon displays under
Internet Gateway.
2Right-click the icon and select Properties.
Ta ble 54 Management > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the LTE3301's IP address
(although you must still enter the password to access the web configurator).
Apply Click Apply to save the setting to the LTE3301.
Cancel Click Cancel to return to the previously saved settings.
Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
120
Figure 79 Network Connections
3In the Internet Connection Properties window, click Settings to see the port mappings there
were automatically created.
Figure 80 Internet Connection Properties
4You may edit or delete the port mappings or click Add to manually add port mappings.
Figure 81 Internet Connection Properties: Advanced Settings
Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
121
Figure 82 Internet Connection Properties: Advanced Settings: Add
Note: When the UPnP-enabled device is disconnected from your computer, all port
mappings will be deleted automatically.
5Select Show icon in n otification area wh en connected option and click OK. An icon displays in
the system tray.
Figure 83 System Tray Icon
6Double-click on the icon to display your current Internet connection status.
Figure 84 Internet Connection Status
18.4.2 Web Configurator Easy Access
With UPnP, you can access the web-based configurator on the LTE3301 without finding out the IP
address of the LTE3301 first. This comes helpful if you do not know the IP address of the LTE3301.
Follow the steps below to access the web configurator.
1Click Start and then Control Panel.
2Double-click Network Connections.
Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
122
3Select My Network Places under Other Places.
Figure 85 Network Connections
4An icon with the description for each UPnP-enabled device displays under Local Network.
5Right-click on the icon for your LTE3301 and select Invoke. The web configurator login screen
displays.
Figure 86 Network Connections: My Network Places
6Right-click on the icon for your LTE3301 and select Properties. A properties window displays with
basic information about the LTE3301.
Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
123
Figure 87 Network Connections: My Network Places: Properties: Example
LTE3301 Series User’s Guide
124
CHAPTER 19
TR-069
19.1 Overview
This chapter explains how to configure the LTE3301’s TR-069 auto-configuration settings.
19.2 TR-069 Screen
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE3301, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending
Remote Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible
Markup Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE3301, modify settings, perform
firmware upgrades as well as monitor and diagnose the LTE3301. You have to enable the device to
be managed by the ACS and specify the ACS IP address or domain name and username and
password.
Click Management > TR-069 to open the following screen. Use this screen to configure your
LTE3301 to be managed by an ACS.
Figure 88 Management > TR-069
Chapter 19 TR-069
LTE3301 Series User’s Guide
125
The following table describes the fields in this screen.
Ta ble 55 Maintenance > TR-069 Client
LABEL DESCRIPTION
Inform Select Enable for the LTE3301 to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the LTE3301 sends information to the
auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
Connection Request
Port
Enter the port number for TR-069 connection requests.
Connection Request
User Name
Enter the connection request user name.
When the ACS makes a connection request to the LTE3301, this user name is used to
authenticate the ACS.
Connection Request
Password
Enter the connection request password.
When the ACS makes a connection request to the LTE3301, this password is used to
authenticate the ACS.
Interface Select a WAN interface through which the TR-069 traffic passes.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.
LTE3301 Series User’s Guide
126
CHAPTER 20
Maintenance
20.1 Overview
This chapter provides information on the Maintenance screens.
20.2 What You Can Do
•Use the General screen to set the timeout period of the management session (Section 20.3 on
page 126).
•Use the Account screen to change your LTE3301’s system password (Section 20.4 on page 127).
•Use the Time screen to change your LTE3301’s time and date (Section 20.5 on page 128).
•Use the Firmware Upgrade screen to upload firmware to your LTE3301 (Section 20.6 on page
130).
•Use the Backup/Restore screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 20.7 on page 131).
•Use the Restart screen to reboot the LTE3301 without turning the power off (Section 20.8 on
page 133).
20.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General.
The following screen displays.
Figure 89 Maintenance > General
Chapter 20 Maintenance
LTE3301 Series User’s Guide
127
The following table describes the labels in this screen.
20.4 Account Screen
It is strongly recommended that you change your LTE3301's system password.
If you forget your LTE3301's password (or IP address), you will need to reset the device. See
Section 20.8 on page 133 for details.
Click Account > Account. The screen appears as shown.
Figure 90 Maintenance > Account
The following table describes the labels in this screen.
20.4.1 Edit a User Account
Use this screen to edit a users account. Click the Edit icon next to the user account you want to
configure. The screen shown next appears.
Ta ble 56 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the LTE3301 in an Ethernet network.
Domain Name Enter the domain name you want to give to the LTE3301.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 300 seconds. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Ta ble 57 Maintenance > Account
LABEL DESCRIPTION
#This is the index number of the entry.
User Name This field displays the name of the user.
Group This field displays the login account type of the user.
Modify Click the Edit icon to edit this user account.
Chapter 20 Maintenance
LTE3301 Series User’s Guide
128
Figure 91 Maintenance > Account > Edit
The following table describes the labels in this screen.
20.5 Time Setting Screen
Use this screen to configure the LTE3301’s time based on your local time zone. To change your
LTE3301’s time and date, click Maintenance > Time. The screen appears as shown.
Ta ble 58 Maintenance > Account > Edit
LABEL DESCRIPTION
Username Enter a descriptive name for the user account. The user name can be up to 15
alphanumeric characters (0-9, A-Z, a-z, -, _ with no spaces).
Old Password Type the default password or the existing password you use to access the system in
this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Group This shows the type of login account.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Chapter 20 Maintenance
LTE3301 Series User’s Guide
129
Figure 92 Maintenance > Time
The following table describes the labels in this screen.
Ta ble 59 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your LTE3301.
Each time you reload this page, the LTE3301 synchronizes the time with the time
server.
Current Date This field displays the date of your LTE3301.
Each time you reload this page, the LTE3301 synchronizes the date with the time
server.
Current Time and Date
Manual Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered has priority and the Time Zone and Daylight Saving settings do not affect
it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time
Server
Select this radio button to have the LTE3301 get the time and date from the time server
you specified below.
Chapter 20 Maintenance
LTE3301 Series User’s Guide
130
20.6 Firmware Upgrade Screen
Find firmware at www.zyxel.com in a file that uses the version number and project code with a
“*.bin” extension, e.g., “V1.00(AAYE.0).bin”. The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your LTE3301.
User Defined Time
Server Address
Select User Defined Time Server Address and enter the IP address or URL (up to 20
extended ASCII characters in length) of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Savings Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening.
Select this option if you use Daylight Saving Time.
Start Date Configure the day and time when Daylight Saving Time starts if you selected Daylight
Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Second, Sunday, March and
select 2 in the at field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of
the time zones in the European Union start using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select Last,
Sunday, March. The time you select in the at field depends on your time zone. In
Germany for instance, you would select 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
End Date Configure the day and time when Daylight Saving Time ends if you selected Daylight
Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time.
So in the United States you would select First, Sunday, November and select 2 in the
at field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of
the time zones in the European Union stop using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select Last,
Sunday, October. The time you select in the at field depends on your time zone. In
Germany for instance, you would select 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Cancel to begin configuring this screen afresh.
Ta ble 59 Maintenance > Time (continued)
LABEL DESCRIPTION
Chapter 20 Maintenance
LTE3301 Series User’s Guide
131
Figure 93 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Note: Do not turn off the LTE3301 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
LTE3301 again.
The LTE3301 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 94 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrad e screen.
20.7 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the LTE3301’s current configuration to a file on
your computer. Once your LTE3301 is configured and functioning properly, it is highly recommended
that you back up your configuration file before making configuration changes. The backup
configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your LTE3301.
Ta ble 60 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Chapter 20 Maintenance
LTE3301 Series User’s Guide
132
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 95 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default LTE3301
IP address (192.168.1.1). See Appendix B on page 148 for details on how to set up
your computer’s IP address.
Ta ble 61 Maintenance > Backup/Restore
LABEL DESCRIPTION
Backup Click Backup to save the LTE3301’s current configuration to your computer.
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Note: Do not turn off the LTE3301 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the LTE3301 again. The LTE3301 automatically restarts in this time
causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset Pressing the Reset button in this section clears all user-entered configuration information
and returns the LTE3301 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
LTE3301. Refer to the chapter about introducing the Web Configurator for more information
on the RESET button.
Chapter 20 Maintenance
LTE3301 Series User’s Guide
133
20.8 Restart Screen
System restart allows you to reboot the LTE3301 without turning the power off.
Click Maintenance > Restart to open the following screen.
Figure 96 Maintenance > Restart
Click Restart to have the LTE3301 reboot. This does not affect the LTE3301's configuration.
LTE3301 Series User’s Guide
134
CHAPTER 21
Troubleshooting
21.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•Power, Hardware Connections, and LEDs
•LTE3301 Access and Login
•Internet Access
•Wireless Connections
21.2 Power, Hardware Connections, and LEDs
The LTE3301 does not turn on. None of the LEDs turn on.
1Make sure you are using the power adaptor or cord included with the LTE3301.
2Make sure the power adaptor or cord is connected to the LTE3301 and plugged in to an appropriate
power source. Make sure the power source is turned on.
3Disconnect and re-connect the power adaptor or cord to the LTE3301.
4If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1Make sure you understand the normal behavior of the LED. See Section 1.8 on page 13.
2Check the hardware connections. See the Quick Start Guide.
3Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4Disconnect and re-connect the power adaptor to the LTE3301.
5If the problem continues, contact the vendor.
Chapter 21 Troubleshooting
LTE3301 Series User’s Guide
135
21.3 LTE3301 Access and Login
I don’t know the IP address of my LTE3301.
1The default IP address of the LTE3301 is 192.168.1.1.
2If you changed the IP address and have forgotten it, you might get the IP address of the LTE3301
by looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the LTE3301 (it depends on the network), so enter this IP
address in your Internet browser.
3Reset your LTE3301 to change all settings back to their default. This means your current settings
are lost. See Section 1.5 on page 12 for information on resetting your LTE3301.
I forgot the password.
1The default password is 1234.
2If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page
12.
I cannot see or access the Login screen in the Web Configurator.
1Make sure you are using the correct IP address.
• The default IP address of the LTE3301 is 192.168.1.1.
• If you changed the IP address (Section 8.4 on page 82), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I
don’t know the IP address of my LTE3301.
2Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.
3Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
enabled. See Appendix A on page 139.
4Make sure your computer is in the same subnet as the LTE3301. (If you know that there are routers
between your computer and the LTE3301, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP
address. See Section 8.4 on page 82.
• If there is no DHCP server on your network, make sure your computer’s IP address is in the
same subnet as the LTE3301. See Section 8.4 on page 82.
Chapter 21 Troubleshooting
LTE3301 Series User’s Guide
136
5Reset the device to its factory defaults, and try to access the LTE3301 with the default IP address.
See Section 1.5 on page 12.
6If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.
Advanced Suggestions
• Try to access the LTE3301 using another service, such as Telnet. If you can access the LTE3301,
check the firewall rules to find out why the LTE3301 does not respond to HTTP.
• If your computer is connected to the WAN port or is connected wirelessly, use a computer that is
connected to a LAN/ETHERNET port.
I can see the Login screen, but I cannot log in to the LTE3301.
1Make sure you have entered the user name and password correctly. The default user name is
admin and the default password is 1234. This field is case-sensitive, so make sure [Caps Lock] is
not on.
2This can happen when you fail to log out properly from your last session. Try logging in again after
5 minutes.
3Disconnect and re-connect the power adaptor or cord to the LTE3301.
4If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page
12.
21.4 Internet Access
I cannot access the Internet.
1Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.
2Make sure your mobile access information (such as APN) is entered correctly in the wizard or the
WAN screen. These fields are case-sensitive, so make sure [Caps Lock] is not on.
3Make sure your SIM card’s account is valid and has an active data plan. Check your service contract
or contact your service provider directly.
4If the problem continues, contact your ISP.
Chapter 21 Troubleshooting
LTE3301 Series User’s Guide
137
I cannot access the Internet anymore. I had access to the Internet (with the LTE3301), but
my Internet connection is not available anymore.
1Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide and Section 1.8 on page 13.
2Reboot the LTE3301.
3If the problem continues, contact your ISP.
The Internet connection is slow or intermittent.
1There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.8 on page 13.
If the LTE3301 is sending or receiving a lot of information, try closing some programs that use the
Internet, especially peer-to-peer applications.
2Check the signal strength. If the signal strength is low, try moving the LTE3301 closer to the ISP’s
base station if possible, and look around to see if there are any devices that might be interfering
with the wireless network (for example, microwaves, other wireless networks, and so on).
3Reboot the LTE3301.
4If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.
Advanced Suggestion
• Check the settings for QoS. If it is disabled, you might consider activating it.
21.5 Wireless Connections
I cannot access the LTE3301 or ping any computer from the WLAN.
1Make sure the wireless LAN is enabled on the LTE3301.
2Make sure the wireless adapter on your computer is working properly.
3Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports
the same wireless standard as the LTE3301.
4Make sure your computer (with a wireless adapter installed) is within the transmission range of the
LTE3301.
Chapter 21 Troubleshooting
LTE3301 Series User’s Guide
138
5Check that both the LTE3301 and the wireless adapter on your computer are using the same
wireless and wireless security settings.
I set up URL keyword blocking, but I can still access a website that should be blocked.
Make sure that the keywords that you type are listed in the rule’s Keyword List.
What factors may cause intermittent or unstabled wireless connection? How can I solve this
problem?
The following factors may cause interference:
• Obstacles: walls, ceilings, furniture, and so on.
• Building Materials: metal doors, aluminum studs.
• Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless
devices.
To optimize the speed and quality of your wireless connection, you can:
• Move your wireless device closer to the AP if the signal strength is low.
• Reduce wireless interference that may be caused by other wireless networks or surrounding
wireless electronics such as cordless phones.
• Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and
the wireless client.
• Reduce the number of wireless clients connecting to the same AP simultaneously, or add
additional APs if necessary.
• Try closing some programs that use the Internet, especially peer-to-peer applications. If the
wireless client is sending or receiving a lot of information, it may have too many programs open
that use the Internet.
• Position the antennas for best reception. If the AP is placed on a table or floor, point the antennas
upwards. If the AP is placed at a high position, point the antennas downwards. Try pointing the
antennas in different directions and check which provides the strongest signal to the wireless
clients.
21.6 Getting More Troubleshooting Help
Search for support information for your model at www.zyxel.com for more troubleshooting
suggestions.
LTE3301 Series User’s Guide
139
APPENDIX A
Pop-up Windows, JavaScript and Java
Permissions
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Note: The screens used below belong to Internet Explorer version 6, 7 and 8. Screens for
other Internet Explorer versions may vary.
Internet Explorer Pop-up Blockers
You may have to disable pop-up blocking to log into your device.
Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow
pop-up blocking and create an exception for your device’s IP address.
Disable Pop-up Blockers
1In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker.
Figure 97 Pop-up Blocker
You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab.
1In Internet Explorer, select Tools, Internet Options, Privacy.
2Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any
web pop-up blockers you may have enabled.
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
140
Figure 98 Internet Options: Privacy
3Click Apply to save this setting.
Enable Pop-up Blockers with Exceptions
Alternatively, if you only want to allow pop-up windows from your device, see the following steps.
1In Internet Explorer, select Tools, Internet Options and then the Privacy tab.
2Select Settings…to open the Pop-up Blocker Settings screen.
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
141
Figure 99 Internet Options: Privacy
3Type the IP address of your device (the web page that you do not want to have blocked) with the
prefix “http://”. For example, http://192.168.167.1.
4Click Add to move the IP address to the list of Allowed sites.
Figure 100 Pop-up Blocker Settings
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
142
5Click Close to return to the Privacy screen.
6Click Apply to save this setting.
JavaScript
If pages of the web configurator do not display properly in Internet Explorer, check that JavaScript
are allowed.
1In Internet Explorer, click Tools, Internet Options and then the Security tab.
Figure 101 Internet Options: Security
2Click the Custom Level... button.
3Scroll down to Scripting.
4Under Active scripting make sure that Enable is selected (the default).
5Under Scripting of Java applets make sure that Enable is selected (the default).
6Click OK to close the window.
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
143
Figure 102 Security Settings - Java Scripting
Java Permissions
1From Internet Explorer, click Tools, Internet Options and then the Security tab.
2Click the Custom Level... button.
3Scroll down to Microsoft VM.
4Under Java permissions make sure that a safety level is selected.
5Click OK to close the window.
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
144
Figure 103 Security Settings - Java
JAVA (Sun)
1From Internet Explorer, click Tools, Internet Options and then the Advanced tab.
2Make sure that Use Java 2 for <applet> under Java (Sun) is selected.
3Click OK to close the window.
Figure 104 Java (Sun)
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
145
Mozilla Firefox
Mozilla Firefox 2.0 screens are used here. Screens for other versions may vary slightly. The steps
below apply to Mozilla Firefox 3.0 as well.
You can enable Java, Javascript and pop-ups in one screen. Click Tools, then click Options in the
screen that appears.
Figure 105 Mozilla Firefox: TOOLS > Options
Click Content to show the screen below. Select the check boxes as shown in the following screen.
Figure 106 Mozilla Firefox Content Security
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
146
Opera
Opera 10 screens are used here. Screens for other versions may vary slightly.
Allowing Pop-Ups
From Opera, click Tools, then Preferences. In the General tab, go to Choose how you prefer
to handle pop-ups and select Open all pop-ups.
Figure 107 Opera: Allowing Pop-Ups
Enabling Java
From Opera, click Tools, then Preferences. In the Advanced tab, select Content from the left-
side menu. Select the check boxes as shown in the following screen.
Appendix A Pop-up Windows, JavaScript and Java Permissions
LTE3301 Series User’s Guide
147
Figure 108 Opera: Enabling Java
To customize JavaScript behavior in the Opera browser, click JavaScript Options.
Figure 109 Opera: JavaScript Options
Select the items you want Opera’s JavaScript to apply.
LTE3301 Series User’s Guide
148
APPENDIX B
Setting Up Your Computer’s IP Address
Note: Your specific LTE3301 may not support all of the operating systems described in
this appendix. See the product specifications for more information about which
operating systems are supported.
This appendix shows you how to configure the IP settings on your computer in order for it to be
able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on
your computer.
If you manually assign IP information instead of using a dynamic IP, make sure that your network’s
computers have IP addresses that place them in the same subnet.
In this appendix, you can set up an IP address for:
•Windows XP/NT/2000 on page 148
•Windows Vista on page 151
•Windows 7 on page 154
•Mac OS X: 10.3 and 10.4 on page 158
•Mac OS X: 10.5 and 10.6 on page 161
•Linux: Ubuntu 8 (GNOME) on page 164
•Linux: openSUSE 10.3 (KDE) on page 168
Windows XP/NT/2000
The following example uses the default Windows XP display theme but can also apply to Windows
2000 and Windows NT.
1Click Start > Control Panel.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
149
2In the Control Panel, click the Network Connections icon.
3Right-click Local Area Connection and then select Properties.
4On the General tab, select Internet Protocol (TCP/IP) and then click Properties.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
150
5The Internet Protocol TCP/IP Properties window opens.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
151
6Select Obtain an IP address automatically if your network administrator or ISP assigns your IP
address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask, and Default
gateway fields if you have a static IP address that was assigned to you by your network
administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS
server, if that information was provided.
7Click OK to close the Internet Protocol (TCP/IP) Properties window.
8Click OK to close the Local Area Connection Properties window.
Verifying Settings
1Click Start > All Programs > Accessories > Command Prompt.
2In the Command Prompt window, type "ipconfig" and then press [ENTER].
You can also go to Start > Control Panel > Network Connections, right-click a network
connection, click Status and then click the Support tab to view your IP address and connection
information.
Windows Vista
This section shows screens from Windows Vista Professional.
1Click Start > Control Panel.
2In the Control Panel, click the Network and Internet icon.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
152
3Click the Network and Sharing Center icon.
4Click Manage network connections.
5Right-click Local Area Connection and then select Properties.
Note: During this procedure, click Continue whenever Windows displays a screen saying
that it needs your permission to continue.
6Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
153
7The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
154
8Select Obtain an IP address automatically if your network administrator or ISP assigns your IP
address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask, and Default
gateway fields if you have a static IP address that was assigned to you by your network
administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS
server, if that information was provided.Click Advanced.
9Click OK to close the Internet Protocol (TCP/IP) Properties window.
10 Click OK to close the Local Area Connection Properties window.
Verifying Settings
1Click Start > All Programs > Accessories > Command Prompt.
2In the Command Prompt window, type "ipconfig" and then press [ENTER].
You can also go to Start > Control Panel > Network Connections, right-click a network
connection, click Status and then click the Support tab to view your IP address and connection
information.
Windows 7
This section shows screens from Windows 7 Enterprise.
1Click Start > Control Panel.
2In the Control Panel, click View network status and tasks under the Network and Internet
category.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
155
3Click Change adapter settings.
4Double click Local Area Connection and then select Properties.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
156
Note: During this procedure, click Continue whenever Windows displays a screen saying
that it needs your permission to continue.
5Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties.
6The Internet Protocol Version 4 (TCP/IPv4) Properties window opens.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
157
7Select Obtain an IP address automatically if your network administrator or ISP assigns your IP
address dynamically.
Select Use the following IP Address and fill in the IP address, Subnet mask, and Default
gateway fields if you have a static IP address that was assigned to you by your network
administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS
server, if that information was provided. Click Advanced if you want to configure advanced
settings for IP, DNS and WINS.
8Click OK to close the Internet Protocol (TCP/IP) Properties window.
9Click OK to close the Local Area Connection Properties window.
Verifying Settings
1Click Start > All Programs > Accessories > Command Prompt.
2In the Command Prompt window, type "ipconfig" and then press [ENTER].
3The IP settings are displayed as follows.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
158
Mac OS X: 10.3 and 10.4
The screens in this section are from Mac OS X 10.4 but can also apply to 10.3.
1Click Apple > System Preferen ces .
2In the System Preferences window, click the Network icon.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
159
3When the Network preferences pane opens, select Built-in Ethernet from the network
connection type list, and then click Configure.
4For dynamically assigned settings, select Using DHCP from the Configur e IPv4 list in the TCP/IP
tab.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
160
5For statically assigned settings, do the following:
•From the Configure IPv4 list, select Manually.
•In the IP Address field, type your IP address.
•In the Subnet Mask field, type your subnet mask.
•In the Router field, type the IP address of your device.
6Click Apply Now and close the window.
Verifying Settings
Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then
selecting the appropriate Network Interface from the Info tab.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
161
Figure 110 Mac OS X 10.4: Network Utility
Mac OS X: 10.5 and 10.6
The screens in this section are from Mac OS X 10.5 but can also apply to 10.6.
1Click Apple > System Preferen ces .
2In System Preferen ces, click the Network icon.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
162
3When the Network preferences pane opens, select Ethernet from the list of available connection
types.
4From the Configure list, select Using DHCP for dynamically assigned settings.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
163
5For statically assigned settings, do the following:
•From the Configure list, select Manually.
•In the IP Address field, enter your IP address.
•In the Subnet Mask field, enter your subnet mask.
•In the Router field, enter the IP address of your LTE3301.
6Click Apply and close the window.
Verifying Settings
Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then
selecting the appropriate Network interface from the Info tab.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
164
Figure 111 Mac OS X 10.5: Network Utility
Linux: Ubuntu 8 (GNOME)
This section shows you how to configure your computer’s TCP/IP settings in the GNU Object Model
Environment (GNOME) using the Ubuntu 8 Linux distribution. The procedure, screens and file
locations may vary depending on your specific distribution, release version, and individual
configuration. The following screens use the default Ubuntu 8 installation.
Note: Make sure you are logged in as the root administrator.
Follow the steps below to configure your computer IP address in GNOME:
1Click System > Administration > Network.
2When the Network Settings window opens, click Unlock to open the Authenticate window. (By
default, the Unlock button is greyed out until clicked.) You cannot make changes to your
configuration unless you first enter your admin password.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
165
3In the Authenticate window, enter your admin account name and password then click the
Authenticate button.
4In the Network Settings window, select the connection that you want to configure, then click
Properties.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
166
5The Properties dialog box opens.
•In the Configuration list, select Automatic Configuration (DHCP ) if you have a dynamic IP
address.
•In the Configuration list, select Static IP address if you have a static IP address. Fill in the
IP address, Subnet mask, and Gateway address fields.
6Click OK to save the changes and close the Properties dialog box and return to the Network
Settings screen.
7If you know your DNS server IP address(es), click the DNS tab in the Network Settings window
and then enter the DNS server information in the fields provided.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
167
8Click the Close button to apply the changes.
Verifying Settings
Check your TCP/IP properties by clicking System > Administration > Network Tools, and then
selecting the appropriate Network device from the Devices tab. The Interface Statistics
column shows data if your connection is working properly.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
168
Figure 112 Ubuntu 8: Network Tools
Linux: openSUSE 10.3 (KDE)
This section shows you how to configure your computer’s TCP/IP settings in the K Desktop
Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file
locations may vary depending on your specific distribution, release version, and individual
configuration. The following screens use the default openSUSE 10.3 installation.
Note: Make sure you are logged in as the root administrator.
Follow the steps below to configure your computer IP address in the KDE:
1Click K Menu > Computer > Administrator Settings (YaST).
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
169
2When the Run as Root - KDE su dialog opens, enter the admin password and click OK.
3When the YaST Control Center window opens, select Network Devices and then click the
Network Card icon.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
170
4When the Network Settings window opens, click the Overview tab, select the appropriate
connection Name from the list, and then click the Configure button.
5When the Network Card Setup window opens, click the Address tab
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
171
Figure 113 openSUSE 10.3: Network Card Setup
6Select Dynamic Address (DHCP) if you have a dynamic IP address.
Select Statically assigned IP Address if you have a static IP address. Fill in the IP address,
Subnet mask, and Hostname fields.
7Click Next to save the changes and close the Network Card Setup window.
8If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings
and then enter the DNS server information in the fields provided.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
172
9Click Finish to save your settings and close the window.
Verifying Settings
Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the
Options sub-menu, select Show Conne ction Information.
Figure 114 openSUSE 10.3: KNetwork Manager
When the Connection Status - KNetwork Manager window opens, click the Statistics tab to
see if your connection is working properly.
Appendix B Setting Up Your Computer’s IP Address
LTE3301 Series User’s Guide
173
Figure 115 openSUSE: Connection Status - KNetwork Manager
LTE3301 Series User’s Guide
174
APPENDIX C
Common Services
The following table lists some commonly-used services and their associated protocols and port
numbers. For a comprehensive list of port numbers, ICMP type/code numbers and services, visit
the IANA (Internet Assigned Number Authority) web site.
•Name: This is a short, descriptive name for the service. You can use this one or create a
different one, if you like.
•Protocol: This is the type of IP protocol used by the service. If this is TCP/UDP, then the service
uses the same port number with TCP and UDP. If this is USER-DEFINED, the Port(s) is the IP
protocol number, not the port number.
•Port(s): This value depends on the Protocol. Please refer to RFC 1700 for further information
about port numbers.
•If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number.
•If the Protocol is USER, this is the IP protocol number.
•Description: This is a brief explanation of the applications that use this service or the situations
in which this service is used.
Ta ble 62 Commonly Used Services
NAME PROTOCOL PORT(S) DESCRIPTION
AH
(IPSEC_TUNNEL)
User-Defined 51 The IPSEC AH (Authentication Header) tunneling
protocol uses this service.
AIM/New-ICQ TCP 5190 AOL’s Internet Messenger service. It is also used as
a listening port by ICQ.
AUTH TCP 113 Authentication protocol used by some servers.
BGP TCP 179 Border Gateway Protocol.
BOOTP_CLIENT UDP 68 DHCP Client.
BOOTP_SERVER UDP 67 DHCP Server.
CU-SEEME TCP
UDP
7648
24032
A popular videoconferencing solution from White
Pines Software.
DNS TCP/UDP 53 Domain Name Server, a service that matches web
names (for example www.zyxel.com) to IP
numbers.
ESP
(IPSEC_TUNNEL)
User-Defined 50 The IPSEC ESP (Encapsulation Security Protocol)
tunneling protocol uses this service.
FINGER TCP 79 Finger is a UNIX or Internet related command that
can be used to find out if a user is logged on.
FTP TCP
TCP
20
21
File Transfer Program, a program to enable fast
transfer of files, including large files that may not
be possible by e-mail.
H.323 TCP 1720 NetMeeting uses this protocol.
HTTP TCP 80 Hyper Text Transfer Protocol - a client/server
protocol for the world wide web.
Appendix C Common Services
LTE3301 Series User’s Guide
175
HTTPS TCP 443 HTTPS is a secured http session often used in e-
commerce.
ICMP User-Defined 1Internet Control Message Protocol is often used for
diagnostic or routing purposes.
ICQ UDP 4000 This is a popular Internet chat program.
IGMP (MULTICAST) User-Defined 2Internet Group Management Protocol is used when
sending packets to a specific group of hosts.
IKE UDP 500 The Internet Key Exchange algorithm is used for
key distribution and management.
IRC TCP/UDP 6667 This is another popular Internet chat program.
MSN Messenger TCP 1863 Microsoft Networks’ messenger service uses this
protocol.
NEW-ICQ TCP 5190 An Internet chat program.
NEWS TCP 144 A protocol for news groups.
NFS UDP 2049 Network File System - NFS is a client/server
distributed file service that provides transparent file
sharing for network environments.
NNTP TCP 119 Network News Transport Protocol is the delivery
mechanism for the USENET newsgroup service.
PING User-Defined 1Packet INternet Groper is a protocol that sends out
ICMP echo requests to test whether or not a remote
host is reachable.
POP3 TCP 110 Post Office Protocol version 3 lets a client computer
get e-mail from a POP3 server through a temporary
connection (TCP/IP or other).
PPTP TCP 1723 Point-to-Point Tunneling Protocol enables secure
transfer of data over public networks. This is the
control channel.
PPTP_TUNNEL
(GRE)
User-Defined 47 PPTP (Point-to-Point Tunneling Protocol) enables
secure transfer of data over public networks. This is
the data channel.
RCMD TCP 512 Remote Command Service.
REAL_AUDIO TCP 7070 A streaming audio service that enables real time
sound over the web.
REXEC TCP 514 Remote Execution Daemon.
RLOGIN TCP 513 Remote Login.
RTELNET TCP 107 Remote Telnet.
RTSP TCP/UDP 554 The Real Time Streaming (media control) Protocol
(RTSP) is a remote control for multimedia on the
Internet.
SFTP TCP 115 Simple File Transfer Protocol.
SMTP TCP 25 Simple Mail Transfer Protocol is the message-
exchange standard for the Internet. SMTP enables
you to move messages from one e-mail server to
another.
SNMP TCP/UDP 161 Simple Network Management Program.
SNMP-TRAPS TCP/UDP 162 Traps for use with the SNMP (RFC:1215).
Ta ble 62 Commonly Used Services (continued)
NAME PROTOCOL PORT(S) DESCRIPTION
Appendix C Common Services
LTE3301 Series User’s Guide
176
SQL-NET TCP 1521 Structured Query Language is an interface to
access data on many different types of database
systems, including mainframes, midrange systems,
UNIX systems and network servers.
SSH TCP/UDP 22 Secure Shell Remote Login Program.
STRM WORKS UDP 1558 Stream Works Protocol.
SYSLOG UDP 514 Syslog allows you to send system logs to a UNIX
server.
TACACS UDP 49 Login Host Protocol used for (Terminal Access
Controller Access Control System).
TELNET TCP 23 Telnet is the login and terminal emulation protocol
common on the Internet and in UNIX environments.
It operates over TCP/IP networks. Its primary
function is to allow users to log into remote host
systems.
TFTP UDP 69 Trivial File Transfer Protocol is an Internet file
transfer protocol similar to FTP, but uses the UDP
(User Datagram Protocol) rather than TCP
(Transmission Control Protocol).
VDOLIVE TCP 7000 Another videoconferencing solution.
Ta ble 62 Commonly Used Services (continued)
NAME PROTOCOL PORT(S) DESCRIPTION
LTE3301 Series User’s Guide
177
APPENDIX D
Legal Information
Copyright
Copyright © 2015 by ZyXEL Communications Corporation.
The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into
any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or
otherwise, without the prior written permission of ZyXEL Communications Corporation.
Published by ZyXEL Communications Corporation. All rights reserved.
Disclaimers
ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it
convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any
products described herein without notice. This publication is subject to change without notice.
Your use of the LTE3301 is subject to the terms and conditions of any related service providers.
Trademarks
Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners.
Regulatory Notice and Statement
UNITED STATE AMERICA
The following information applies if you use the product within USA area.
FCC EMC St atement
• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1This device may not cause harmful interference, and
2this device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
• This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
• If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
1Reorient or relocate the receiving antenna.
2Increase the separation between the equipment or devices.
3Connect the equipment to an outlet other than the receiver's.
4Consult a dealer or an experienced radio/TV technician for assistance.
FCC Radiation Exposure Statement
• This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
• This transmitter must be at least 20 cm from the user and must not be co-located or operating in conjunction with any other antenna
or transmitter.
CANADA
The following information applies if you use the product within Canada area.
Industry Canada ICES statement
CAN ICES-3 (B)/NMB-3(B)
Appendix D Legal Information
LTE3301 Series User’s Guide
178
Industry Canada RSS-GEN & RSS-210 statement
• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
• Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
• This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
• Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
• Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un
gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope
rayonnée quivalente (p.i.r.e.) ne dépassepas l’intensité nécessaire à l’établissement d’une communication satisfaisante.
• Le présent émetteur radio de modèle s'il fait partie du matériel de catégorieI) a été approuvé par Industrie Canada pour fonctionner
avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement
interdits pour l'exploitation de l'émetteur.
Industry Canada radiation exposure statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20cm between the radiator and your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé.Cet équipement
doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
EUROPEAN UNION
The following information applies if you use the product within the European Union.
Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive)
Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/
5/EC (R&TTE).
Български
(Bulgarian) С настоящото ZyXEL декларира, че това оборудване е в съответствие със съществените изисквания и другите
приложими разпоредбите на Директива 1999/5/ЕC.
Español
(Spanish) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Čeština
(Czech) ZyXEL tímto prohlašuje, že tento zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 1999/5/EC.
Dansk (Danish) Undertegnede ZyXEL erklærer herved, at følgende udstyr udstyr overholder de væsentlige krav og øvrige relevante
krav i direktiv 1999/5/EF.
Deutsch
(German) Hiermit erklärt ZyXEL, dass sich das Gerät Ausstattung in Übereinstimmung mit den grundlegenden Anforderungen
und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EU befindet.
Eesti keel
(Estonian) Käesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Ελληνικά
(Greek) ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ ZyXEL ∆ΗΛΩΝΕΙ ΟΤΙ εξοπλισμός ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕC.
English Hereby, ZyXEL declares that this equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Français
(French) Par la présente ZyXEL déclare que l'appareil équipements est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/EC.
Hrvatski
(Croatian) ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC.
Íslenska
(Icelandic) Hér með lýsir, ZyXEL því yfir að þessi búnaður er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipunar
1999/5/EC.
Appendix D Legal Information
LTE3301 Series User’s Guide
179
National Restrictions
This product may be used in all EU countries (and other countries following the EU Directive 2014/53/EU) without any limitation except for
the countries mentioned below:
Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 2014/53/UE) sans aucune
limitation, excepté pour les pays mentionnés ci-dessous:
Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 2014/53/UE) senza nessuna limitazione,
eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 2014/53/EU
folgen) mit Außnahme der folgenden aufgeführten Staaten:
In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless
local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements
or both are applicable.
The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their
national regulations for both the 2.4GHz and 5GHz wireless LANs.
The following countries have restrictions and/or requirements in addition to those given in the table labeled “Overview of Regulatory
Requirements for Wireless LANs”:.
Belgium
The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range
exceeding 300 meters. Please check http://www.bipt.be for more details.
Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch
Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens.
Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des
services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails.
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless
this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.” Please
check http://www.sviluppoeconomico.gov.it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in
Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.
Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.
Latvia
The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://
www.esd.lv for more details.
Italiano
(Italian) Con la presente ZyXEL dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Latviešu valoda
(Latvian) Ar šo ZyXEL deklarē, ka iekārtas atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių kalba
(Lithuanian) Šiuo ZyXEL deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Magyar
(Hungarian) Alulírott, ZyXEL nyilatkozom, hogy a berendezés megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EK
irányelv egyéb elõírásainak.
Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagħmir jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li
hemm fid-Dirrettiva 1999/5/EC.
Nederlands
(Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EC.
Polski (Polish) Niniejszym ZyXEL oświadcza, że sprzęt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português
(Portuguese) ZyXEL declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/EC.
Română
(Romanian) Prin prezenta, ZyXEL declară că acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi
relevante ale Directivei 1999/5/EC.
Slovenčina
(Slovak) ZyXEL týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/EC.
Slovenščina
(Slovene) ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/EC.
Suomi
(Finnish) ZyXEL vakuuttaa täten että laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska
(Swedish) Härmed intygar ZyXEL att denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EC.
Norsk
(Norwegian) Erklærer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante
bestemmelser I direktiv 1999/5/EF.
Appendix D Legal Information
LTE3301 Series User’s Guide
180
2.4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas: http://
www.esd.lv.
Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 2014/53/EU has also been implemented in
those countries.
2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding
the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).
List of national codes
Safety Warnings
• Do NOT use this product near water, for example, in a wet basement or near a swimming pool.
• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY
qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North
America or 230V AC in Europe).
• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power
adaptor or cord.
• Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.
• If the power adaptor or cord is damaged, remove it from the device and the power source.
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
• Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.
• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.
• Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the
included antenna(s).
• If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged.
• The PoE (Power over Ethernet) devices that supply or receive power and their connected Ethernet cables must all be completely
indoors.
• This product is for indoor use only (utilisation intérieure exclusivement).
• FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all Wi-Fi product
marketed in US must fixed to US operation channels only.
COUNTRY ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE
Austria AT Liechtenstein LI
Belgium BE Lithuania LT
Bulgaria BG Luxembourg LU
Croatia HR Malta MT
Cyprus CY Netherlands NL
Czech Republic CR Norway NO
Denmark DK Poland PL
Estonia EE Portugal PT
Finland FI Romania RO
France FR Serbia RS
Germany DE Slovakia SK
Greece GR Slovenia SI
Hungary HU Spain ES
Iceland IS Sweden SE
Ireland IE Switzerland CH
Italy IT Turkey TR
Latvia LV United Kingdom GB
Appendix D Legal Information
LTE3301 Series User’s Guide
181
Environment statement
ErP (Energy-related Products)
ZyXEL products put on the EU market in compliance with the requirement of the European Parliament and the Council published
Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called
as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures,
power consumption has satisfied regulation requirements which are:
Network standby power consumption < 12W, and/or
Off mode power consumption < 0.5W, and/or
Standby mode power consumption < 0.5W.
Wireless setting, please refer to "Wireless" chapter for more detail.
WEEE Directive
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and
Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste.
Used electrical and electronic equipment should be treated separately.
"INFORMAZIONI AGLI UTENTI"
Ai sensi della Direttiva 2012/19/UE del Parlamento europeo e del Consiglio, del 4 luglio 2012, sui rifiuti di apparecchiature elettriche ed
elettroniche (RAEE)
Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il prodotto alla fine della propria vita utile
deve essere raccolto separatamente dagli altri rifiuti.
La raccolta differenziata della presente apparecchiatura giunta a fine vita e organizzata e gestita dal produttore. L’utente che vorra disfarsi
della presente apparecchiatura dovra quindi contattare il produttore e seguire il sistema che questo ha adottato per consentire la raccolta
separata dell’apparecchiatura giunta a fine vita.
L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchiatura dismessa al riciclaggio, al trattamento e allo smaltimento
ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il reimpiego e/o riciclo
dei materiali di cui e composta l’apparecchiatura.
Lo smaltimento abusivo del prodotto da parte del detentore comporta l’applicazione delle sanzioni amministrative previste dalla normativa
vigente."
Appendix D Legal Information
LTE3301 Series User’s Guide
182
Environmental Product Declaration
Appendix D Legal Information
LTE3301 Series User’s Guide
183
台灣
以下訊息僅適用於產品銷售至台灣地區
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Viewing Certifications
Go to http://www.zyxel.com to view this product’s documentation and certifications.
ZyXEL Limited Warranty
ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific
period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the
authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of
purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or
replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to
restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally
equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has
been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.
Note
Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other
warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in
no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought
the device at http://www.zyxel.com/web/support_warranty_info.php.
Registration
Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com.
Open Source Licenses
This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are
provided with the firmware package. You can download the latest firmware at www.zyxel.com. If you cannot find it there, contact your
vendor or ZyXEL Technical Support at support@zyxel.com.tw.
To obtain the source code covered under those Licenses, please contact your vendor or ZyXEL Technical Support at
support@zyxel.com.tw.
LTE3301 Series User’s Guide
184
APPENDIX E
Customer Support
In the event of problems that cannot be solved by using this manual, you should contact your
vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you
bought the device.
Regional websites are listed below.
See also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml.
Please have the following information ready when you contact an office.
Required Information
• Product model and serial number.
• Warranty Information.
• Date that you received your device.
• Brief description of the problem and the steps you took to solve it.
Corporate Headquarters (Worldwide)
Taiwan
• ZyXEL Communications Corporation
• http://www.zyxel.com
Asia
China
• ZyXEL Communications (Shanghai) Corp.
ZyXEL Communications (Beijing) Corp.
ZyXEL Communications (Tianjin) Corp.
• http://www.zyxel.cn
India
• ZyXEL Technology India Pvt Ltd
• http://www.zyxel.in
Kazakhstan
•ZyXEL Kazakhstan
• http://www.zyxel.kz
Appendix E Customer Support
LTE3301 Series User’s Guide
185
Korea
• ZyXEL Korea Corp.
• http://www.zyxel.kr
Malaysia
• ZyXEL Malaysia Sdn Bhd.
• http://www.zyxel.com.my
Pakistan
• ZyXEL Pakistan (Pvt.) Ltd.
• http://www.zyxel.com.pk
Philipines
• ZyXEL Philippines
• http://www.zyxel.com.ph
Singapore
• ZyXEL Singapore Pte Ltd.
• http://www.zyxel.com.sg
Taiwan
• ZyXEL Communications Corporation
• http://www.zyxel.com
Thailand
• ZyXEL Thailand Co., Ltd
• http://www.zyxel.co.th
Vietnam
• ZyXEL Communications Corporation-Vietnam Office
• http://www.zyxel.com/vn/vi
Europe
Austria
• ZyXEL Deutschland GmbH
• http://www.zyxel.de
Appendix E Customer Support
LTE3301 Series User’s Guide
186
Belarus
•ZyXEL BY
• http://www.zyxel.by
Belgium
• ZyXEL Communications B.V.
• http://www.zyxel.com/be/nl/
Bulgaria
•ZyXEL България
• http://www.zyxel.com/bg/bg/
Czech
• ZyXEL Communications Czech s.r.o
• http://www.zyxel.cz
Denmark
• ZyXEL Communications A/S
• http://www.zyxel.dk
Estonia
•ZyXEL Estonia
• http://www.zyxel.com/ee/et/
Finland
• ZyXEL Communications
• http://www.zyxel.fi
France
•ZyXEL France
• http://www.zyxel.fr
Germany
• ZyXEL Deutschland GmbH
• http://www.zyxel.de
Hungary
• ZyXEL Hungary & SEE
• http://www.zyxel.hu
Latvia
•ZyXEL Latvia
Appendix E Customer Support
LTE3301 Series User’s Guide
187
• http://www.zyxel.com/lv/lv/homepage.shtml
Lithuania
• ZyXEL Lithuania
• http://www.zyxel.com/lt/lt/homepage.shtml
Netherlands
•ZyXEL Benelux
• http://www.zyxel.nl
Norway
• ZyXEL Communications
• http://www.zyxel.no
Poland
• ZyXEL Communications Poland
• http://www.zyxel.pl
Romania
•ZyXEL Romania
• http://www.zyxel.com/ro/ro
Russia
• ZyXEL Russia
• http://www.zyxel.ru
Slovakia
• ZyXEL Communications Czech s.r.o. organizacna zlozka
• http://www.zyxel.sk
Spain
•ZyXEL Spain
• http://www.zyxel.es
Sweden
• ZyXEL Communications
• http://www.zyxel.se
Switzerland
•Studerus AG
Appendix E Customer Support
LTE3301 Series User’s Guide
188
• http://www.zyxel.ch/
Turkey
•ZyXEL Turkey A.S.
• http://www.zyxel.com.tr
UK
• ZyXEL Communications UK Ltd.
• http://www.zyxel.co.uk
Ukraine
•ZyXEL Ukraine
• http://www.ua.zyxel.com
Latin America
Argentina
• ZyXEL Communication Corporation
• http://www.zyxel.com/ec/es/
Ecuador
• ZyXEL Communication Corporation
• http://www.zyxel.com/ec/es/
Middle East
Egypt
• ZyXEL Communication Corporation
• http://www.zyxel.com/homepage.shtml
Middle East
• ZyXEL Communication Corporation
• http://www.zyxel.com/homepage.shtml
North America
USA
• ZyXEL Communications, Inc. - North America Headquarters
• http://www.us.zyxel.com/
Appendix E Customer Support
LTE3301 Series User’s Guide
189
Oceania
Australia
• ZyXEL Communications Corporation
• http://www.zyxel.com/au/en/
Africa
South Africa
• Nology (Pty) Ltd.
• http://www.zyxel.co.za
Index
LTE3301 Series User’s Guide
190
Index
A
ACS 124
ActiveX 110
Address Assignment 50
Auto Configuration Server, see ACS 124
B
Bandwidth management
overview 114
priority 116
C
certifications
viewing 183
Channel 23
channel 62
Configuration
restore 132
configuration
static route 127
contact information 184
content filtering
by keyword (in URL) 109
Cookies 110
copyright 177
CPU usage 24
customer support 184
D
Daylight saving 130
DDNS 97
see also Dynamic DNS
service providers 97, 112
DHCP 44, 83
DHCP server
see also Dynamic Host Configuration Protocol
DHCP server 82, 83
disclaimer 177
DNS 86
DNS Server 50
DNS server 86
documentation
related 2
Domain Name System 86
Domain Name System. See DNS.
Dynamic DNS 97
Dynamic Host Configuration Protocol 83
DynDNS 97, 112
DynDNS see also DDNS 97, 112
E
encryption 63
and local (user) database 64
key 64
WPA compatible 64
ESSID 137
F
FCC interference statement 177
Firewall
guidelines 105
ICMP packets 106
firewall
stateful inspection 104
Firmware upload 130
file extension
using HTTP
firmware version 23
Index
LTE3301 Series User’s Guide
191
G
General wireless LAN screen 64
Guide
Quick Start 2
I
IGMP 51
see also Internet Group Multicast Protocol
version
IGMP version 51
interface group 102
Internet Group Multicast Protocol 51
Internet Protocol version 6 51
IP Address 82, 90
IP Pool 84
IPv6 51
addressing 51
prefix 52
prefix length 52
J
Java 110
L
LAN 81
IP pool setup 83
LAN overview 81
LAN setup 81
Language 133
Link type 24
local (user) database 63
and encryption 64
Local Area Network 81
logout
Web Configurator 19
M
MAC 73
MAC address 63
MAC address filter 63
MAC address filtering 73
MAC filter 73
managing the device
good habits 12
using the web configurator. See web configurator.
using the WPS. See WPS.
Media access control 73
Memory usage 24
Multicast 51
IGMP 51
N
NAT 88, 89
overview 88
port forwarding 94
see also Network Address Translation
server sets 94
NAT Traversal 118
Navigation Panel 19
navigation panel 19
Network Address Translation 88, 89
O
other documentation 2
P
Pool Size 84
Port forwarding 90, 94
default server 90, 94
example 95
local server 90
port numbers
services
port speed 24
Index
LTE3301 Series User’s Guide
192
product registration 183
Q
Quality of Service (QoS) 76
Quick Start Guide 2
R
RADIUS server 63
registration
product 183
related documentation 2
remote management
TR-069 124
Remote Procedure Calls, see RPCs 124
Reset button 12
Reset the device 12
Restore configuration 132
Roaming 75
RPPCs 124
RTS/CTS Threshold 62, 75
S
Scheduling 78
Service and port numbers 108, 117
Service Set 65, 73
Service Set IDentification 65, 73
Service Set IDentity. See SSID.
setup
static route 127
SSID 23, 62, 65, 73
stateful inspection firewall 104
Static DHCP 85
Static Route 99
static route
configuration 127
Status 21
Subnet Mask 82
Summary
DHCP table 44
Packet statistics 44, 46
Wireless station status 45
System General Setup 126
System restart 133
T
TCP/IP configuration 83
Time setting 128
TR-069 124
ACS setup 124
trademarks 177
trigger port 95
Trigger port forwarding 95
example 95
process 95
U
Universal Plug and Play 118
Application 118
Security issues 118
UPnP 118
URL Keyword Blocking 110
user authentication 63
local (user) database 63
RADIUS server 63
User Name 98
W
WAN (Wide Area Network) 49
warranty 183
note 183
Web Configurator
how to access 16
Overview 16
web configurator 12
Web Proxy 110
WEP Encryption 68, 69
Index
LTE3301 Series User’s Guide
193
WEP encryption 67
WEP key 67
Wireless association list 45
wireless channel 137
wireless LAN 137
wireless LAN scheduling 78
Wireless network
basic guidelines 62
channel 62
encryption 63
example 61
MAC address filter 63
overview 61
security 62
SSID 62
Wireless security 62
overview 62
type 62
wireless security 137
Wireless tutorial 30
Wizard setup 25
WLAN button 13
WPA compatible 64
WPS 12