Brother DCP-J1200W User Manual
Displayed below is the user manual for DCP-J1200W by Brother which is a product in the Multifunctionals category. This manual has pages.
Related Manuals
Quick Setup Guide
Read the Product Safety Guide first, then read this guide for the correct installation procedure.
Brother recommends keeping this guide next to your Brother machine for quick reference.
D01U0L001-00
UK
Version 0
EN
1Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
DCP-J1200W
NOTE
• The components included in the box may differ depending on your country.
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to use.
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
• Brother aims to reduce waste and save the raw materials and energy required for their
production. Read more about our environmental work at www.brotherearth.com.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Video setup instructions:
support.brother.com/videos
Pull the paper tray completely
out of the machine, and then
open the output paper tray cover.
Fan the paper well and load it in
the tray.
Adjust the paper guides. Close the output paper tray
cover, and then slowly push the
paper tray completely into the
machine.
Pull out the paper support a, and
unfold the paper support flap b so
that the printed pages do not fall.
Close the ink cartridge cover. The machine will prepare the ink tube
system for printing.
Wait until the machine prints the Print Quality Check Sheet and go to
4.
NOTE
The first time you install a set of ink cartridges, the machine will use
an amount of ink to fill the ink delivery tubes for high-quality printouts.
This process will only happen once.
The machine prints the Print Quality Check
Sheet.
Check the print quality of the four colour blocks on the
sheet.
For more information about paper handling and sizes, see the Online User’s Guide
at support.brother.com/manuals.
2Load plain A4 paper in the paper tray
3Connect the power cord and install the inbox ink cartridges
4Check the print quality
You must complete steps 1 - 5 to be able to use this machine.
Connect the power cord. Open the ink cartridge cover. Unpack and install the inbox ink
cartridges.
Visit setup.brother.com to download and install Brother
software.
Follow the on-screen instructions and
prompts.
NOTE
For USB Connection, locate the USB port inside
the machine as shown.
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit
support.brother.com/up7.
Important Notice for Network Security:
The default password to manage this machine’s settings is
located on the back of the machine and marked “Pwd”. We
recommend immediately changing the default password to
protect your machine from unauthorised access.
5Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
setup.brother.com
If the quality of any of the four colour blocks is Poor (see the image on the
left), we strongly recommend cleaning the print head to improve the print
quality.
See the Improve Print Quality section in this guide.
NOTE
To change the language of the sheet, see the Online User’s Guide at
support.brother.com/manuals.
1
2
OK Poor
* Use these inbox ink cartridges
for the initial installation.
Press and
simultaneously.
The Ink LED blinks.
Do one of the following:
• For cleaning only black, press
MONO COPY.
• For cleaning all colours, press
COLOUR COPY.
The machine cleans the print head, and then
prints the Print Quality Check Sheet.
Check the print
quality of the four
colour blocks on the
sheet.
If the print quality is still poor after cleaning several times, try the
Special cleaning:
1. Press and simultaneously, and then release.
2. Press and hold MONO COPY and COLOUR COPY
simultaneously for five seconds.
When copying or scanning;
Place the document face
down in the bottom right
corner of the scanner glass.
Change the paper settings from the control panel
You can print or copy using the following paper settings, depending on the number of times you press (a).
Paper Button LED Indication Paper Settings
(Default)
• Paper type: Plain
• Paper size: A4 (For printing standard documents)
x 1 • Paper type: Other glossy
• Paper size: 10 x 15cm (For printing photos)
x 2
Custom - To change these settings, access the Print menu in Web Based
Management using either the Brother Mobile Connect app on your mobile device or
the Brother iPrint&Scan app on your computer. For details, see the Online User's
Guide.
Print
Go to your application’s print dialog box, make sure your machine is selected and online, and then click Print. To change the print
settings (for example, 2-sided printing), click the printing properties or preferences button.
Copy (f/g)
• To print a single copy, load your document, and then press f or g once.
• To print multiple copies, load your document, and then press f or g repeatedly, depending on the number of copies you want.
Scan
To scan a single page, load your document, and then press f and g simultaneously. For scanning multiple pages or other
scanning features, use your preferred scanning software/application. For details, see the Online User’s Guide.
Reference and Troubleshooting For detailed machine information and product specifications,
see the Online User's Guide at support.brother.com/manuals.
Basic Operations
If ink gets on your skin or
clothing, immediately wash it off
with soap or detergent.
LED Indications
Improve Print Quality
Remove Jammed Paper
* To use your machine on a wireless network, see the
Online User's Guide.
Pull the paper tray completely out of the
machine.
Open the Jam Clear Cover at the back of
the machine.
Press to clear the Paper Jam
error.
If the machine has not completed a
job due to the paper jam, try again.
Slowly pull the jammed paper out
of the machine.
Slowly pull the jammed paper out of the
machine.
Close the Jam Clear Cover. Push the paper tray firmly back in
the machine.
Machine
Status
Ready Busy Sleep Wi-Fi®
Status
Connecting Connected Disconnected
(Blinking slowly)
Off
Error
Status
No Paper:
Refill the paper tray, and then press
MONO COPY or COLOUR COPY.
Wrong Paper Size:
Check that the paper settings you selected using the machine's control panel match the size of
the paper in the tray. After correcting the paper size, press MONO COPY or COLOUR COPY.
Ink Cover Open:
Firmly close the ink cartridge cover
until it locks into place.
No Ink Cartridge / Cannot Detect / Monochrome Print Only:
• Reinstall the ink cartridge slowly and firmly, or replace the ink cartridge with a new one.
• One or more of the colour ink cartridges need to be replaced.
Ink Low:
Prepare to replace the ink cartridge
when necessary.
Paper Jam:
See the Remove Jammed Paper
section below.
Memory Full:
Cancel any operations in progress,
and then try again.
Control Panel
aPaper button
bA4 LED
c10 x 15cm LED
dWi-Fi LED
ePower LED
fMono Copy button
gColour Copy button
hInk LED
iWarning LED
jPower/Stop button
kWi-Fi button *
Lit Blinking Blinking slowly and faintly
1
2
© 2021 Brother Industries, Ltd. All rights reserved.
For more information about troubleshooting, see the Online User’s Guide at support.brother.com/manuals.
OK Poor
D01U0L001-00
h
a
k
j
f
g
b
c
d
e
i