Table of Contents
- Online User's Guide HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Print
- Print from Your Computer (Windows®)
- Print a Document (Windows®)
- Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows®)
- Print as a Poster (Windows®)
- Print on Both Sides of the Paper (Windows®)
- Print as a Booklet (Windows®)
- Secure Print (Windows®)
- Use a Macro from Your Computer (Windows®)
- Use a Preset Print Profile (Windows®)
- Change the Default Print Settings (Windows®)
- Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation) (Windows®)
- Monitor the Status of the Machine from Your Computer (Windows®)
- Print Settings (Windows®)
- Print from Your Computer (Macintosh)
- Print a Document (Macintosh)
- Print on Both Sides of the Paper (Macintosh)
- Print More Than One Page on a Single Sheet of Paper (N in 1) (Macintosh)
- Secure Print (Macintosh)
- Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation) (Macintosh)
- Monitor the Status of the Machine from Your Computer (Macintosh)
- Print Options (Macintosh)
- Print One Page Duplicates on Different Types of Paper
- Cancel a Print Job
- Test Print
- Print from Your Computer (Windows®)
- Network
- Get Started
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Configure Your Machine for an Enterprise Wireless Network
- Use Wi-Fi Direct®
- Print from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method and Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Before Using Network Security Features
- Secure Function Lock 3.0
- Use Active Directory® Authentication
- Use LDAP Authentication
- Manage Your Network Machine Securely Using SSL/TLS
- Introduction to SSL/TLS
- Certificates and Web Based Management
- Supported Security Certificate Features
- Create and Install a Certificate
- Manage Multiple Certificates
- Manage Your Network Machine Securely Using Web Based Management
- Manage Your Network Machine Securely Using BRAdmin Professional 3 (Windows®)
- Print Documents Securely Using SSL/TLS
- Manage Your Network Machine Securely Using IPsec
- Send an Email Securely
- Use IEEE 802.1x Authentication for a Wired or a Wireless Network
- Store Print Log to Network
- Mobile/Web Connect
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
- Glossary
Brother HL-L5100DNT User Manual
Displayed below is the user manual for HL-L5100DNT by Brother which is a product in the Laser Printers category. This manual has pages.
Related Manuals
Online User's Guide
HL-L5000D
HL-L5100DN
HL-L5100DNT
HL-L5200DW
HL-L5200DWT
HL-L6250DN
HL-L6300DW
HL-L6300DWT
HL-L6400DW
HL-L6400DWT
© 2015 Brother Industries, Ltd. All rights reserved.
Table of Contents
Before You Use Your Brother Machine ............................................................................................... 1
Applicable Models .......................................................................................................................................... 2
Definitions of Notes ........................................................................................................................................ 3
Trademarks .................................................................................................................................................... 4
Important Note ............................................................................................................................................... 5
Introduction to Your Brother Machine................................................................................................. 6
Before Using Your Machine ........................................................................................................................... 7
Front View and Back View ............................................................................................................................. 8
Control Panel Overview ............................................................................................................................... 10
Touchscreen LCD Overview......................................................................................................................... 14
How to Navigate the Touchscreen LCD ....................................................................................................... 16
Access Brother Utilities (Windows®) ............................................................................................................ 18
Uninstall the Brother Software and Drivers (Windows®) .................................................................... 20
Paper Handling.................................................................................................................................... 21
Load Paper................................................................................................................................................... 22
Load and Print Using the Paper Tray ................................................................................................. 23
Load and Print Using the Multi‑purpose Tray (MP Tray) .................................................................... 28
Paper Settings.............................................................................................................................................. 35
Change the Paper Size and Paper Type............................................................................................ 36
Change the Check Paper Size Setting............................................................................................... 37
Unprintable Area .......................................................................................................................................... 38
Recommended Print Media.......................................................................................................................... 39
Using Special Paper..................................................................................................................................... 40
Print ...................................................................................................................................................... 41
Print from Your Computer (Windows®) ........................................................................................................ 42
Print a Document (Windows®)............................................................................................................ 43
Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows®).................................... 45
Print as a Poster (Windows®)............................................................................................................. 46
Print on Both Sides of the Paper (Windows®).................................................................................... 47
Print as a Booklet (Windows®) ........................................................................................................... 50
Secure Print (Windows®).................................................................................................................... 52
Use a Macro from Your Computer (Windows®).................................................................................. 54
Use a Preset Print Profile (Windows®)............................................................................................... 55
Change the Default Print Settings (Windows®).................................................................................. 58
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language Emulation)
(Windows®) ........................................................................................................................................ 60
Monitor the Status of the Machine from Your Computer (Windows®) ................................................ 61
Print Settings (Windows®).................................................................................................................. 62
Print from Your Computer (Macintosh)......................................................................................................... 67
Print a Document (Macintosh)............................................................................................................ 68
Print on Both Sides of the Paper (Macintosh) .................................................................................... 69
Print More Than One Page on a Single Sheet of Paper (N in 1) (Macintosh).................................... 71
Secure Print (Macintosh).................................................................................................................... 72
Home > Table of Contents
i
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language emulation)
(Macintosh)......................................................................................................................................... 74
Monitor the Status of the Machine from Your Computer (Macintosh)................................................. 75
Print Options (Macintosh)................................................................................................................... 76
Print One Page Duplicates on Different Types of Paper .............................................................................. 82
Cancel a Print Job........................................................................................................................................ 84
Test Print ...................................................................................................................................................... 85
Network ................................................................................................................................................ 86
Get Started................................................................................................................................................... 87
Supported Basic Network Features.................................................................................................... 88
Network Management Software and Utilities ............................................................................................... 89
Learn about Network Management Software and Utilities ................................................................. 90
Additional Methods of Configuring Your Brother Machine for a Wireless Network ...................................... 91
Before Configuring Your Brother Machine for a Wireless Network..................................................... 92
Configure Your Machine for a Wireless Network................................................................................ 93
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
Setup™ (WPS).................................................................................................................................... 94
Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected
Setup™ (WPS).................................................................................................................................... 96
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) ............. 100
Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup
Wizard .............................................................................................................................................. 106
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast ........................ 109
Configure Your Machine for an Enterprise Wireless Network .......................................................... 112
Use Wi-Fi Direct®............................................................................................................................. 117
Advanced Network Features...................................................................................................................... 131
Print the Network Configuration Report............................................................................................ 132
Print the WLAN Report..................................................................................................................... 133
Configure the SNTP Protocol Using Web Based Management ....................................................... 136
Technical Information for Advanced Users................................................................................................. 138
Gigabit Ethernet (Wired Network Only) ............................................................................................ 139
Reset the Network Settings to the Factory Settings......................................................................... 141
Security .............................................................................................................................................. 142
Lock the Machine Settings ......................................................................................................................... 143
About Using Setting Lock ................................................................................................................. 144
Network Security Features......................................................................................................................... 148
Before Using Network Security Features ......................................................................................... 149
Secure Function Lock 3.0................................................................................................................. 150
Use Active Directory® Authentication............................................................................................... 156
Use LDAP Authentication................................................................................................................. 160
Manage Your Network Machine Securely Using SSL/TLS............................................................... 164
Manage Your Network Machine Securely Using IPsec .................................................................... 197
Send an Email Securely ................................................................................................................... 215
Use IEEE 802.1x Authentication for a Wired or a Wireless Network ............................................... 220
Store Print Log to Network ............................................................................................................... 225
Mobile/Web Connect......................................................................................................................... 230
Use Web Services from Your Brother Machine.......................................................................................... 231
Home > Table of Contents
ii
Print with Google Cloud Print™.................................................................................................................. 232
Print with AirPrint........................................................................................................................................ 233
Print with Mopria™...................................................................................................................................... 234
Print from a Mobile Device ......................................................................................................................... 235
Print Using Near-Field Communication (NFC) ........................................................................................... 236
Troubleshooting ................................................................................................................................ 237
Error and Maintenance Messages ............................................................................................................. 238
Paper Jams ................................................................................................................................................ 246
Paper is Jammed in the MP tray ...................................................................................................... 247
Paper is Jammed in the Paper Tray ................................................................................................. 248
Paper is Jammed in the Back of the Machine .................................................................................. 250
Paper is Jammed inside the Machine .............................................................................................. 252
Paper is Jammed in the 2-sided Tray............................................................................................... 254
Paper is Jammed in the Mailbox Unit............................................................................................... 256
Printing Problems....................................................................................................................................... 257
Improve the Print Quality............................................................................................................................ 259
Network Problems...................................................................................................................................... 263
Error Messages ................................................................................................................................ 264
Use the Network Connection Repair Tool (Windows®) .................................................................... 267
Where Can I Find My Brother Machine's Network Settings? ........................................................... 269
I Cannot Complete the Wireless Network Setup Configuration........................................................ 270
My Brother Machine Cannot Print over the Network ........................................................................ 272
I Want to Check that My Network Devices are Working Correctly ................................................... 274
Other Problems .......................................................................................................................................... 275
Check the Machine Information ................................................................................................................. 277
Reset Functions ......................................................................................................................................... 279
Network Reset.................................................................................................................................. 280
Factory Reset ................................................................................................................................... 281
Routine Maintenance ........................................................................................................................ 282
Replace Supplies ....................................................................................................................................... 283
Replace the Toner Cartridge ............................................................................................................ 285
Replace the Drum Unit ..................................................................................................................... 288
Clean the Machine ..................................................................................................................................... 290
Clean the Touchscreen LCD ............................................................................................................ 292
Clean the Corona Wire..................................................................................................................... 293
Clean the Drum Unit......................................................................................................................... 294
Clean the Paper Pick-up Rollers ...................................................................................................... 300
Check the Remaining Life of Parts............................................................................................................. 301
Pack and Ship Your Machine ..................................................................................................................... 302
Pack the Machine and the Toner Cartridge Together ....................................................................... 303
Pack the Machine and the Toner Cartridge Separately.................................................................... 305
Machine Settings............................................................................................................................... 308
Change Machine Settings from the Control Panel ..................................................................................... 309
General Settings............................................................................................................................... 310
Settings and Features Tables........................................................................................................... 320
Change Machine Settings from Your Computer......................................................................................... 337
Home > Table of Contents
iii
Change Machine Settings Using Web Based Management ............................................................ 338
Appendix............................................................................................................................................ 343
Specifications ............................................................................................................................................. 344
How to Enter Text on Your Brother Machine .............................................................................................. 351
Supplies ..................................................................................................................................................... 353
Accessories................................................................................................................................................ 355
Mailbox Unit...................................................................................................................................... 356
Information Regarding Recycled Paper ..................................................................................................... 361
Glossary............................................................................................................................................. 362
Home > Table of Contents
iv
Home > Before You Use Your Brother Machine > Applicable Models
Applicable Models
This User's Guide applies to the following models:
1 line LCD models: HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1.8 inch Touchscreen LCD models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Related Information
•Before You Use Your Brother Machine
2
Home > Before You Use Your Brother Machine > Definitions of Notes
Definitions of Notes
We use the following symbols and conventions throughout this User's Guide:
WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injuries.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.
IMPORTANT IMPORTANT indicates a potentially hazardous situation which, if not avoided, may
result in damage to property or loss of product functionality.
NOTE NOTE specifies the operating environment, conditions for installation, or special
conditions of use.
Tips icons indicate helpful hints and supplementary information.
Electrical Hazard icons alert you to possible electrical shock.
Fire Hazard icons alert you to the possibility of a fire.
Hot Surface icons warn you not to touch hot machine parts.
Prohibition icons indicate actions you must not perform.
Bold Bold style identifies buttons on the machine's control panel or computer screen.
Italics Italicised style emphasises an important point or refers you to a related topic.
Courier New Courier New font identifies messages shown on the machine's LCD.
Related Information
•Before You Use Your Brother Machine
3
Home > Before You Use Your Brother Machine > Trademarks
Trademarks
BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.
Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Active Directory, OneNote, Windows
phone and OneDrive are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
Apple, Macintosh, Mac OS, Safari, iPad, iPhone, iPod touch and OS X are trademarks of Apple Inc., registered
in the United States and other countries.
AirPrint is a trademark of Apple Inc.
PostScript and PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
Wi-Fi CERTIFIED, Wi-Fi, Wi-Fi Alliance, Wi-Fi Direct and Wi-Fi Protected Access are registered trademarks of
Wi-Fi Alliance®.
WPA, WPA2, Wi-Fi Protected Setup and Wi-Fi Protected Setup logo are trademarks of Wi-Fi Alliance®.
Android, Google Cloud Print, Google Drive, Google Chrome and Google Play are trademarks of Google, Inc. Use
of these trademarks is subject to Google Permissions.
Mopria is a trademark of Mopria Alliance, Inc.
Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Intel is a trademark of Intel Corporation in the U.S. and/or other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its
proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents
and any other materials are all trademarks or registered trademarks of those respective companies.
Related Information
•Before You Use Your Brother Machine
4
Home > Before You Use Your Brother Machine > Important Note
Important Note
• Do not use this product outside the country of purchase as it may violate the wireless telecommunication and
power regulations of that country.
• Not all models are available in all countries.
• Windows® XP in this document represents Windows® XP Professional, Windows® XP Professional x64
Edition and Windows® XP Home Edition.
• Windows Server® 2003 in this document represents Windows Server® 2003, Windows Server® 2003 x64
Edition, Windows Server® 2003 R2 and Windows Server® 2003 R2 x64 Edition.
• Windows Server® 2008 in this document represents Windows Server® 2008 and Windows Server® 2008 R2.
• In this User's Guide, the LCD messages of the HL-L5100DN/HL-L5200DW are used unless otherwise
specified.
• In this User's Guide, the illustrations of the HL-L6300DW/HL-L6400DW are used unless otherwise specified.
• Unless otherwise specified, the screens in this manual are from Windows® 7 and OS X v10.9.x. Screens on
your computer may vary depending on your operating system.
• Not all features are available in countries subject to applicable export restrictions.
Related Information
•Before You Use Your Brother Machine
5
Home > Introduction to Your Brother Machine > Before Using Your Machine
Before Using Your Machine
Before attempting any printing operation, confirm the following:
• Make sure you have installed the printer driver.
• For USB or network cable users: Make sure the interface cable is physically secure.
Firewall (Windows®)
If your computer is protected by a firewall and you are unable to network print, you may need to configure the
firewall settings. If you are using the Windows® Firewall and you installed the printer driver from the CD-ROM,
the necessary firewall settings have already been set. If you are using any other personal firewall software, see
the User's Guide for your software or contact the software manufacturer.
Related Information
•Introduction to Your Brother Machine
7
Home > Introduction to Your Brother Machine > Front View and Back View
Front View and Back View
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Front View
5
4
3
6
1
7
2
Back View
12
9
10
8
8
9
11
1. Face down output tray support flap (support flap)
2. Face down output tray
3. Front cover release button
4. Front cover
5. Paper tray
6. Multi-purpose tray (MP tray)
7. Control panel with a Liquid Crystal Display (LCD)
8. (For wired network models)
10BASE-T / 100BASE-TX / 1000BASE-T port (supported models only)
9. USB port
10. Parallel port (supported models only)
11. AC power connector / cord
12. Back cover (Face up output tray)
The machine is equipped with a non-detachable AC power cord depending on the model.
8
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Front View
5
4
3
6
1
7
2
Back View
9
10
11
12
13
8
1. Face down output tray support flap (support flap)
2. Face down output tray
3. Front cover release button
4. Front cover
5. Paper tray
6. Multi-purpose tray (MP tray)
7. Touch panel with a tiltable Touchscreen LCD
8. (For wired network models)
10BASE-T / 100BASE-TX / 1000BASE-T port
9. USB port
10. USB accessory port
11. AC power connector / cord
12. Back cover (Face up output tray)
13. Paper stopper
The machine is equipped with a non-detachable AC power cord depending on the model.
Related Information
•Introduction to Your Brother Machine
9
Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
The control panel may vary depending on your model.
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
8
2
1
3
4
5
6
9
7
1. Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
Wireless Network Models
A four-level indicator shows the wireless signal strength if you are using a wireless connection.
0 Max
2. Data LED
The Data LED blinks depending on the machine’s status.
When the Data LED is on, data is in the machine’s memory. When the Data LED blinks, the machine is
receiving or processing data.
3. Error LED
The Error LED blinks when the LCD displays an error or an important status message.
4. Menu Buttons
OK
Press to store your machine’s settings. After you change a setting, the machine returns to the previous
menu level.
Back
• Press to go back one level in the menu.
• Press to select the previous digit when entering numbers.
10
a or b (+ or -)
• Press to scroll through menus and options.
• Press to enter a number or to increase or decrease the number. Hold down a or b to scroll faster.
When you see the number you want, press OK.
5. Secure
Press to print jobs saved in the memory when you enter your four-digit password.
6. Go
• Press to clear certain error messages. To clear all other errors, follow the LCD instructions.
• Press to print any data remaining in the machine's memory.
• Press to select the displayed option. After you change a setting, the machine returns to Ready Mode.
7. Cancel
• Press to cancel the current setting.
• Press to cancel a programmed print job and clear it from the machine’s memory. To cancel multiple print
jobs, hold down Cancel until the LCD displays [Cancel All Jobs].
8. Power On/Off
• Turn the machine on by pressing .
• Turn the machine off by pressing and holding down . The LCD displays [Shutting Down] for a few
seconds before going off.
9. WiFi, Network, or Report buttons
• Non-Network Models:
Report
Press the Report button to print the Printer Settings page.
• Wired Network Models:
Network
Press the Network button to set up wired network settings.
• Wireless Network Models:
WiFi
Launch the wireless installer on your computer and press the WiFi button. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
11
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1
2
3
4
1. Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on the Touchscreen.
2. Power On/Off
• Turn the machine on by pressing .
• Turn the machine off by pressing and holding down . The LCD displays [Shutting Down] for a few
seconds before going off.
3. Touchpanel
(Back)
Press to go back to the previous menu.
(Home)
• Press to return to the Home screen.
• While the machine is in Sleep Mode, the Home icon blinks.
(Cancel)
• Press to cancel an operation (available when lit).
• Press to cancel a programmed print job and clear it from the machine’s memory. To cancel multiple
print jobs, hold down until the LCD displays [Cancel All Jobs].
or
Press to display the previous or next page.
4. (WiFi)
(For infrastructure mode)
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light
blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access
point.
12
Home > Introduction to Your Brother Machine > Touchscreen LCD Overview
Touchscreen LCD Overview
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
From the Home screen, you can access the Wi‑Fi setup, Toner level, Settings, and Functions screen.
The Home screen displays the machine’s status when the machine is idle. This screen is also called the Ready
Mode screen. When displayed, this screen indicates that your machine is ready for the next command.
If Active Directory® Authentication or LDAP Authentication is enabled, the machine's control panel will be locked.
The available features vary depending on your model.
1. (Wireless Status )
If you are using a wireless connection, a four-level indicator in the Home screen displays the current wireless
signal strength.
0 Max
• If you see at the top on the screen, press it to configure wireless settings.
2. (Toner)
Displays the remaining toner life. Press to access the [Toner] menu.
3. [Settings]
Press to access the [Settings] menu.
Use the Settings menu to access all of your Brother machine's settings.
If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to
change settings.
4. [Functions]
Press to access the Functions screen.
•[Secure]
Press to access the Secure Print option.
14
•[Web]
Press to connect the Brother machine to an Internet service. For more information, see the Web Connect
Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to
download the guide.
Warning icon
The warning icon appears when there is an error or maintenance message; press to view it, and
then press to return to Ready Mode.
Related Information
•Introduction to Your Brother Machine
15
Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD
How to Navigate the Touchscreen LCD
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Press your finger on the LCD to operate it. To display and access all the options, press a or b on the Touchpanel
to scroll through them.
The following steps explain how to navigate through changing the machine's setting. In this example, the LCD
Backlight setting is changed from [Light] to [Med].
IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this
may cause an error.
1. Press [Settings].
2. Press a or b to display the [General Setup] option, and then press [General Setup].
Sengs
General Setup
Print Menu
3. Press a or b to display the [Panel Control] option, and then press [Panel Control].
General Setup
Volume
Panel Control
4. Press [LCD Settings].
16
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows®)
Access Brother Utilities (Windows®)
Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on
your computer.
1. Do one of the following:
• (Windows® XP, Windows Vista®, Windows® 7, Windows Server® 2003, Windows Server® 2008 and
Windows Server® 2008 R2)
Click (Start) > All Programs > Brother > Brother Utilities.
• (Windows® 8 and Windows Server® 2012)
Tap or click (Brother Utilities) either on the Start screen or the desktop.
• (Windows® 8.1 and Windows Server® 2012 R2)
Move your mouse to the lower left corner of the Start screen and click (if you are using a touch-
based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click (Brother Utilities).
2. Select your machine (where XXXX is the name of your model).
3. Choose the operation you want to use.
18
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows®) > Uninstall the Brother
Software and Drivers (Windows®)
Uninstall the Brother Software and Drivers (Windows®)
1. Do one of the following:
• (Windows® XP, Windows Vista®, Windows® 7, Windows Server® 2003, Windows Server® 2008 and
Windows Server® 2008 R2)
Click (Start) > All Programs > Brother > Brother Utilities.
• (Windows® 8 and Windows Server® 2012)
Tap or click (Brother Utilities) either on the Start screen or the desktop.
• (Windows® 8.1 and Windows Server® 2012 R2)
Move your mouse to the lower left corner of the Start screen and click (if you are using a touch-
based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click (Brother Utilities).
2. Click the drop-down list, and then select your model name (if not already selected). Click Tools in the left
navigation bar, and then click Uninstall.
Follow the instructions in the dialog box to uninstall the software and drivers.
Related Information
•Access Brother Utilities (Windows®)
20
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray
Load and Print Using the Paper Tray
•Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper and Recycled
Paper Using the Paper Tray
•Load and Print Thick Paper Using the Paper Tray
•Printing Problems
•Error and Maintenance Messages
23
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load and Print Plain Paper,
Letterhead, Coloured Paper, Thin Paper and Recycled Paper Using the Paper Tray
Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper and
Recycled Paper Using the Paper Tray
• If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on
the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type
settings if needed, following the LCD instructions.
• When you load a different size and type of paper in the tray, you must change the Paper Size and Paper
Type settings in the machine or on your computer, also.
1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
Press the green release levers to slide the paper guides.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
When you use Letterhead or Preprinted paper, load the paper in the correct orientation as shown in the
illustrations.
Paper Orientation for Letterhead and Preprinted Paper
For 1-sided printing
• face down
• top edge toward the front of the paper tray
24
For automatic 2-sided printing (long edge binding)
• face up
• bottom edge toward the front of the paper tray
• DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may
cause the paper to jam or misfeed.
• When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by
completing the following step:
- (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
- (HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Lift the support flap to prevent paper from sliding off the output tray.
8. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
Related Information
•Load and Print Using the Paper Tray
25
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load and Print Thick Paper
Using the Paper Tray
Load and Print Thick Paper Using the Paper Tray
• If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on
the LCD asking if you want to change the paper size and paper type. Change the paper size and paper type
settings if needed, following the LCD instructions.
• When you load a different size and type of paper in the tray, you must change the Paper Size and Paper
Type settings in the machine or on your computer, also.
1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
Press the green release levers to slide the paper guides.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause
the paper to jam or misfeed.
26
5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Open the machine's back cover (the face up output tray).
8. Open the paper stopper (Available only for certain models).
9. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
10. Close the paper stopper.
11. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
•Load and Print Using the Paper Tray
27
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray)
Load and Print Using the Multi‑purpose Tray (MP Tray)
You can load up to ten envelopes, letterhead, coloured paper, thin or thick paper, recycled paper, Bond paper,
labels, or up to 50 sheets of plain paper in the MP tray.
•Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper, Recycled Paper
and Bond Paper in the MP Tray
•Load and Print Thick Paper and Labels Using the MP Tray
•Load and Print on Envelopes Using the MP Tray
•Printing Problems
•Error and Maintenance Messages
28
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper, Recycled Paper and Bond Paper in the MP
Tray
Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper,
Recycled Paper and Bond Paper in the MP Tray
When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type
settings in the machine or on your computer, also.
1. Lift the support flap to prevent paper from sliding off the face down output tray.
2. Open the MP tray and lower it gently.
3. Pull out the MP tray support (1) and unfold the flap (2).
2
1
4. Slide the MP tray paper guides to fit the width of the paper you are using. If the paper guide on the right side
has a lever, press it and slide the paper guide.
5. Load paper with the printing surface face up in the MP tray. When you use Letterhead or Preprinted paper,
load the paper in the correct orientation as shown in the illustrations.
29
1
Make sure the paper is below the maximum paper mark (1).
Paper Orientation for Letterhead and Preprinted Paper
For 1-sided printing
• face up
• top edge first
For automatic 2-sided printing (long edge binding)
• face down
• bottom edge first
When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by
completing the following step:
• (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
6. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
Related Information
•Load and Print Using the Multi‑purpose Tray (MP Tray)
30
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
and Print Thick Paper and Labels Using the MP Tray
Load and Print Thick Paper and Labels Using the MP Tray
When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP
tray through to the back of the machine. Use this paper feed and output method when you print on thick paper or
labels.
When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type
settings in the machine or on your computer, also.
1. Open the machine's back cover (the face up output tray).
2. Open the paper stopper (Available only for certain models).
3. On the front of the machine, open the MP tray and lower it gently.
4. Pull out the MP tray support (1) and unfold the flap (2).
2
1
5. Slide the MP tray paper guides to fit the width of the paper that you are using. If the paper guide on the right
side has a lever, press it and slide the paper guide.
31
6. Load paper or labels in the MP tray.
1
• Make sure the paper is below the maximum paper mark (1).
• Load paper into the MP tray with the printing surface face up.
7. Send your print job to the machine.
Change your print preferences in the Print screen before sending the print job from your computer.
8. Close the paper stopper.
9. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
•Load and Print Using the Multi‑purpose Tray (MP Tray)
32
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
and Print on Envelopes Using the MP Tray
Load and Print on Envelopes Using the MP Tray
You can load up to ten envelopes in the MP tray.
Before loading, press the corners and sides of the envelopes to make them as flat as possible.
When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type
settings in the machine or on your computer, also.
1. Open the machine's back cover (the face up output tray).
2. Open the paper stopper (Available only for certain models).
3. On the front of the machine, open the MP tray and lower it gently.
4. Pull out the MP tray support (1) and unfold the flap (2).
2
1
5. Slide the MP tray paper guides to fit the width of the envelopes that you are using. If the paper guide on the
right side has a lever, press it and slide the paper guide.
33
6. Load envelopes in the MP tray.
1
Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are
below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams.
7. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
Settings Options for Envelopes
Paper Size Com-10
DL
C5
Monarch
Media Type Envelopes
Env. Thick
Env. Thin
8. Close the paper stopper.
9. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
•Load and Print Using the Multi‑purpose Tray (MP Tray)
34
Home > Paper Handling > Paper Settings > Change the Paper Size and Paper Type
Change the Paper Size and Paper Type
When you change the size and type of the paper you load in the tray, you must change the Paper Size and
Paper Type settings on the LCD at the same time.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Paper Tray] option, and then press OK.
2. Press a or b to select the [Paper Type] option, and then press OK.
3. Press a or b to select the paper tray that you want to change, and then press OK.
4. Press a or b to select the paper type you want, and then press OK.
5. Press Back.
6. Press a or b to select the [Paper Size] option, and then press OK.
7. Press a or b to select the paper tray that you want to change, and then press OK.
8. Press a or b to select the paper size you want, and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Paper Tray] > [Paper Type].
2. Press a or b to display the paper tray options, and then press the option you want.
3. Press a or b to display the paper type options, and then press the option you want.
4. Press .
5. Press a or b to display the [Paper Size] option.
6. Press a or b to display the paper tray options, and then press the option you want.
7. Press a or b to display the paper size options, and then press the option you want.
8. Press .
Related Information
•Paper Settings
36
Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a
paper tray or load paper using the MP tray, asking if you changed the paper size and paper type.
The default setting is On.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Paper Tray] option, and then press OK.
2. Press a or b to select the [Check Size] option, and then press OK.
3. Press a or b to select the [On] or [Off] option, and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Paper Tray] > [Check Size].
2. Press [On] or [Off].
3. Press .
Related Information
•Paper Settings
37
Home > Paper Handling > Unprintable Area
Unprintable Area
The figures below show maximum unprintable areas from the edges of the most commonly-used paper sizes.
The measurements may vary depending on the paper size or settings in the application you are using.
1
3
24
Do not attempt to print into these areas; your output will not reflect anything in these areas.
Usage Document Size Top (1)
Bottom (3)
Left (2)
Right (4)
Print Letter 4.23 mm 4.23 mm
A4 4.23 mm 4.23 mm
Legal 4.23 mm 4.23 mm
Related Information
•Paper Handling
38
Home > Paper Handling > Recommended Print Media
Recommended Print Media
To get the best print quality, we recommend using the paper listed in the table.
Paper Type Item
Plain Paper Xerox Premier TCF 80 g/m2
Xerox Business 80 g/m2
Recycled Paper Steinbeis Evolution White 80 g/m2
Labels Avery laser label L7163
Envelopes Antalis River series (DL)
Related Information
•Paper Handling
39
Home > Paper Handling > Using Special Paper
Using Special Paper
Always test paper samples before purchasing them to ensure desirable performance.
• DO NOT use inkjet paper; it may cause a paper jam or damage your machine.
• If you use bond paper, paper with a rough surface, or paper that is wrinkled or creased, the paper may exhibit
degraded performance.
Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct
sunlight and heat.
IMPORTANT
Some types of paper may not perform well or may cause damage to your machine.
DO NOT use paper:
• that is highly textured
• that is extremely smooth or shiny
• that is curled or warped
• that is coated or has a chemical finish
• that is damaged, creased or folded
• that exceeds the recommended weight specification in this guide
• with tabs and staples
• with letterheads using low temperature dyes or thermography
• that is multipart or carbonless
• that is designed for inkjet printing
If you use any of the types of paper listed above, they may damage your machine. This damage is not
covered under any Brother warranty or service agreement.
Related Information
•Paper Handling
40
Home > Print > Print from Your Computer (Windows®)
Print from Your Computer (Windows®)
•Print a Document (Windows®)
•Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows®)
•Print as a Poster (Windows®)
•Print on Both Sides of the Paper (Windows®)
•Print as a Booklet (Windows®)
•Secure Print (Windows®)
•Use a Macro from Your Computer (Windows®)
•Use a Preset Print Profile (Windows®)
•Change the Default Print Settings (Windows®)
•Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ Language
Emulation) (Windows®)
•Monitor the Status of the Machine from Your Computer (Windows®)
•Print Settings (Windows®)
42
Home > Print > Print from Your Computer (Windows®) > Print a Document (Windows®)
Print a Document (Windows®)
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Make sure you have loaded the correct size paper in the paper tray.
4. Click the Paper Size drop-down list, and then select your paper size.
5. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the
application.
6. Type the number of copies (1-999) you want in the Copies field.
7. Click the Media Type drop-down list, and then select the type of paper you are using.
8. To print multiple pages on a single sheet of paper or print one page of your document on multiple sheets,
click the Multiple Page drop-down list, and then select your options.
9. Change other printer settings if needed.
10. Click OK.
11. Complete your print operation.
43
Home > Print > Print from Your Computer (Windows®) > Print More Than One Page on a Single Sheet of
Paper (N in 1) (Windows®)
Print More Than One Page on a Single Sheet of Paper (N in 1)
(Windows®)
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the
application.
4. Click the Multiple Page drop-down list, and then select the 2 in 1, 4 in 1, 9 in 1, 16 in 1, or 25 in 1 option.
5. Click the Page Order drop-down list, and then select your page order.
6. Click the Border Line drop-down list, and then select your border line type.
7. Change other printer settings if needed.
8. Click OK.
9. Complete your print operation.
Related Information
•Print from Your Computer (Windows®)
•Print Settings (Windows®)
45
Home > Print > Print from Your Computer (Windows®) > Print as a Poster (Windows®)
Print as a Poster (Windows®)
Enlarge your print size and print the document in poster mode.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Multiple Page drop-down list, and then select the 1 in 2x2 Pages, 1 in 3x3 Pages, 1 in 4x4 Pages,
or 1 in 5x5 Pages option.
4. Select the Print cut-out line check box, if needed.
Print cut-out line
Prints a faint cut-out line around the printable area so that you can easily cut it out.
5. Change other printer settings if needed.
6. Click OK.
7. Complete your print operation.
Related Information
•Print from Your Computer (Windows®)
•Print Settings (Windows®)
46
Home > Print > Print from Your Computer (Windows®) > Print on Both Sides of the Paper (Windows®)
Print on Both Sides of the Paper (Windows®)
• Select A4 sized paper when using the automatic 2-sided printing function.
• Make sure the back cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper or thin paper. DO NOT use bond paper.
• If the paper is too thin, it may wrinkle.
• When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print
quality.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the
application.
4. Click the 2-sided / Booklet drop-down list, and then select the 2-sided or 2-sided (Manual) option.
Option Description
2-sided (Available only for
certain models)
Automatically prints on both sides of the paper.
2-sided (Manual) The machine prints all the even-numbered pages on one side of the paper
first. Then, the printer driver instructs you (with a pop-up message) to
reinsert the paper.
5. Click the 2-sided Settings button.
6. Select one of the options from the 2-sided Type menu.
When 2-sided is selected, four types of 2-sided binding are available for each orientation:
47
Option for Portrait Description
Long Edge (Left)
Long Edge (Right)
Short Edge (Top)
Short Edge (Bottom)
Option for Landscape Description
Long Edge (Top)
Long Edge (Bottom)
48
Option for Landscape Description
Short Edge (Right)
Short Edge (Left)
7. Select the Binding Offset check box if you want to specify the offset for binding in inches or millimetres.
8. Click OK.
9. Change other printer settings if needed.
10. Do one of the following:
• For automatic 2-sided printing, click OK again, and then complete your print operation.
• For manual 2-sided printing, click OK again and follow the on-screen instructions.
If the paper is not feeding correctly, it may be curled. Remove the paper, straighten it, and put it back in the paper
tray.
Related Information
•Print from Your Computer (Windows®)
•Print Settings (Windows®)
49
Home > Print > Print from Your Computer (Windows®) > Print as a Booklet (Windows®)
Print as a Booklet (Windows®)
Use this option to print a document in booklet format using 2-sided printing. The document's pages will be
arranged according to the correct page number and will allow you to fold the print output at the centre, without
having to change the order of the printed pages.
• Select A4 sized paper when using the automatic 2-sided printing function.
• Make sure the back cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper or thin paper. DO NOT use bond paper.
• If the paper is too thin, it may wrinkle.
• When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print
quality.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the
application.
4. Click the 2-sided / Booklet drop-down list, and then select the Booklet or Booklet (Manual) option.
Option Description
Booklet (Available only for certain models) Automatically prints as a booklet.
Booklet (Manual) Manually prints as a booklet.
5. Click the 2-sided Settings button.
6. Select one of the options from the 2-sided Type menu.
There are two types of 2-sided binding directions available for each orientation:
50
Option for Portrait Description
Left Binding
Right Binding
Option for Landscape Description
Top Binding
Bottom Binding
7. Select one of the options from the Booklet Printing Method menu.
Option Description
All Pages at
Once
Every page will be printed in booklet format (four pages to every piece of paper, two pages
per side). Fold your printout in the centre to create the booklet.
Divide into
Sets
This option prints the whole booklet in smaller individual booklet sets, allowing you to fold at
the centre of the smaller individual booklet sets without having to change the order of the
printed pages. You can specify the number of sheets in each smaller booklet set (from
1-15). This option can be helpful when folding a printed booklet that has a large number of
pages.
8. Select the Binding Offset check box if you want to specify the offset for binding in inches or millimetres.
9. Click OK.
10. Change other printer settings if needed.
11. Do one of the following:
• For automatic booklet printing, click OK again, and then complete your print operation.
• For manual booklet printing, click OK again and follow the on-screen instructions.
Related Information
•Print from Your Computer (Windows®)
•Print Settings (Windows®)
51
Home > Print > Print from Your Computer (Windows®) > Secure Print (Windows®)
Secure Print (Windows®)
Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on
the machine's control panel.
• The secure data is deleted from the machine when you turn off the machine.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Advanced tab.
4. Click the Settings button in the Secure Print field.
5. Select the Secure Print check box.
6. Type your four-digit password in the Password field, and then click OK.
You must set a separate password for each document.
7. Click OK.
8. Complete your print operation.
9. On the machine's control panel, press Secure.
10. Press a or b to display your user name, and then press OK.
The LCD displays the list of secured jobs for that name.
11. Press a or b to display the job, and then press OK.
12. Enter your four-digit password.
To enter each digit, press a or b to select a number, and then press OK.
13. Press a or b to select the [Print] option, and then press OK.
14. Press a or b to enter the number of copies you want.
15. Press OK.
The machine prints the data.
After you print the secured data, it will be cleared from the machine's memory.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Advanced tab.
4. Click the Settings button in the Secure Print field.
5. Select the Secure Print check box.
6. Type your four-digit password in the Password field, and then click OK.
You must set a separate password for each document.
7. Click OK.
52
8. Complete your print operation.
9. On the machine's control panel, press [Functions].
10. Press [Secure].
11. Press a or b to display user names, and then press your user name.
The LCD displays the list of secured jobs for that name.
12. Press a or b to display the print job you want to print, and then press it.
13. Enter your four-digit password, and then press [OK].
14. Enter the number of copies you want.
15. Press [Start].
The machine prints the data.
After you print the secured data, it will be cleared from the machine's memory.
Related Information
•Print from Your Computer (Windows®)
53
Home > Print > Print from Your Computer (Windows®) > Use a Macro from Your Computer (Windows®)
Use a Macro from Your Computer (Windows®)
If you have stored the electronic forms (macros) in your machine's memory, you can use the macro to print the
data as an overlay on the print job you want.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Advanced tab.
4. Click the Other Print Options button.
5. Select Macro.
6. Click the Macro Settings button.
7. Enter Macro ID and Macro Name you want to use.
8. Select Insert Macro Command.
9. Select the page to overlay the macro data.
Option Description
All Pages Lets you insert the macro onto all pages.
Page Lets you insert the macro onto a specific page. Select this option, and then enter a
page number within the range 1 to 255.
Add to Top of Page Send the macro data to the top of the page.
Add to End of Page Send the macro data to the bottom of the page.
When Booklet has been selected, the Page setting in Insert Macro Command is disabled.
10. Click OK.
11. Click OK to return to the printer driver window.
12. Click OK.
13. Complete your print operation.
The macro data is printed as an overlay.
Related Information
•Print from Your Computer (Windows®)
•Print One Page Duplicates on Different Types of Paper
54
Home > Print > Print from Your Computer (Windows®) > Use a Preset Print Profile (Windows®)
Use a Preset Print Profile (Windows®)
Print Profiles are presets designed to give you quick access to frequently-used printing configurations.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Print Profiles tab.
4. Select your profile from the print profile list.
The profile settings are shown on the left side of the printer driver window.
5. Do one of the following:
• If the settings are correct for your print job, click OK.
• To change the settings, go back to the Basic or Advanced tab, change settings, and then click OK.
To display the Print Profiles tab at the front of the window the next time you print, select the Always show
Print Profiles tab first. check box.
Related Information
•Print from Your Computer (Windows®)
55
Home > Print > Print from Your Computer (Windows®) > Use a Preset Print Profile (Windows®) > Create or
Delete Your Print Profile (Windows®)
Create or Delete Your Print Profile (Windows®)
Add up to 20 new print profiles with customised settings.
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Click the Basic tab and the Advanced tab, and configure the print settings you want for the new Print Profile.
4. Click the Print Profiles tab.
5. Do one of the following:
To create a new print profile:
a. Click Add Profile.
The Add Profile dialog box appears.
b. Type the new profile name in the Name field.
c. Click the icon you want to use to represent this profile from the icon list.
d. Click OK.
The new Print Profile name is added to the list in the Print Profiles tab.
To delete a print profile that you created:
a. Click Delete Profile.
The Delete Profile dialog box appears.
b. Select the profile you want to delete.
c. Click Delete.
d. Click Yes.
e. Click Close.
Related Information
•Use a Preset Print Profile (Windows®)
57
Home > Print > Print from Your Computer (Windows®) > Change the Default Print Settings (Windows®)
Change the Default Print Settings (Windows®)
When you change print settings from within a program, the changes apply only to the items you are printing in
that program, at that time. To select print settings to use for all of your Windows® programs, all the time, use
these steps to change the default print settings.
1. Do one of the following:
• (For Windows® XP and Windows Server® 2003)
Click Start > Printers and Faxes.
• (For Windows Vista® and Windows Server® 2008)
Click (Start) > Control Panel > Hardware and Sound > Printers.
• (For Windows® 7 and Windows Server® 2008 R2)
Click (Start) > Devices and Printers.
• (For Windows® 8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
• (For Windows Server® 2012)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware group, click View devices and printers.
• (For Windows Server® 2012 R2)
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.
2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer
properties. If printer driver options appear, select your printer driver.
3. Click the General tab, and then click the Printing Preferences... or Preferences... button.
The printer driver dialog box appears.
• To configure the tray settings, click the Device Settings tab.
• To change the printer port, click the Ports tab.
4. Select the print settings you want to use as defaults for all of your Windows® programs.
5. Click OK.
6. Close the printer properties dialog box.
Related Information
•Print from Your Computer (Windows®)
•Configure the Optional Tray Settings (Windows®)
•Print Settings (Windows®)
58
Home > Print > Print from Your Computer (Windows®) > Change the Default Print Settings
(Windows®) > Configure the Optional Tray Settings (Windows®)
Configure the Optional Tray Settings (Windows®)
Access your machine's Properties to auto-detect your machine's Optional Tray and serial number.
The printer driver automatically detects the Optional Tray during the driver installation. If you added the Optional
Tray after the driver installation, follow these steps.
1. Do one of the following:
• (For Windows® XP and Windows Server® 2003)
Click Start > Printers and Faxes.
• (For Windows Vista® and Windows Server® 2008)
Click (Start) > Control Panel > Hardware and Sound > Printers.
• (For Windows® 7 and Windows Server® 2008 R2)
Click (Start) > Devices and Printers.
• (For Windows® 8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
• (For Windows Server® 2012)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware group, click View devices and printers.
• (For Windows Server® 2012 R2)
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.
2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer
properties. If printer driver options appear, select your printer driver.
3. Select the Device Settings tab.
4. Click the Auto Detect button.
The Optional Tray and the machine's serial number are automatically detected.
5. Click the Apply button.
The Auto Detect function is not available under the following machine conditions:
• The machine power switch is off.
• The machine is in an error state.
• The machine is in a network shared environment.
• The cable is not connected to the machine correctly.
Related Information
•Change the Default Print Settings (Windows®)
59
Home > Print > Print from Your Computer (Windows®) > Print a Document Using the BR-Script3 Printer
Driver (PostScript® 3™ Language Emulation) (Windows®)
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™
Language Emulation) (Windows®)
The BR-Script3 printer driver lets you print PostScript® data more clearly.
To install the PS driver (BR-Script3 printer driver), launch Brother's installation CD-ROM, select Custom in
Select Machine section, and then check PS Driver check box.
1. Select the print command in your application.
2. Select Brother XXX-XXXX BR-Script3 (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Layout, Paper/Quality, or Secure Print tab to change basic print settings.
Click the Layout or Paper/Quality tab, and then click the Advanced... button to change advanced print
settings.
4. Click OK.
5. Complete your print operation.
Related Information
•Print from Your Computer (Windows®)
60
Home > Print > Print from Your Computer (Windows®) > Monitor the Status of the Machine from Your
Computer (Windows®)
Monitor the Status of the Machine from Your Computer (Windows®)
The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices,
allowing you to get immediate notification of errors.
• To display the Status Monitor icon on your task tray, click the button. The (Status Monitor) icon
will appear in the small window. Drag the icon to the task tray.
• Do one of the following:
- Double-click the icon in the task tray.
- (Windows® XP, Windows Vista®, Windows® 7, Windows Server® 2003, Windows Server® 2008 and
Windows Server® 2008 R2)
Click (Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click Tools in the left
navigation bar, and then click Status Monitor.
- (Windows® 8 and Windows Server® 2012)
Click (Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click Tools in the left navigation bar, and then click Status Monitor.
- (Windows® 8.1 and Windows Server® 2012 R2)
Move your mouse to the lower left corner of the Start screen and click (if you are using a touch-
based device, swipe up from bottom of the Start screen to bring up the Apps screen). When the Apps
screen appears, tap or click (Brother Utilities), and then click the drop-down list and select your
model name (if not already selected). Click Tools in the left navigation bar, and then click Status
Monitor.
Troubleshooting
Click the Troubleshooting button to access the troubleshooting website.
Looking for replacement supplies?
Click the Looking for replacement supplies? button for more information on Brother genuine supplies.
When you enable Status Monitor, if you selected Automatic Firmware Update during installation, this
feature will detect and download any updates for your machine.
Related Information
•Print from Your Computer (Windows®)
•Printing Problems
61
Home > Print > Print from Your Computer (Windows®) > Print Settings (Windows®)
Print Settings (Windows®)
Basic Tab
1. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a
custom paper size.
2. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
3. Copies
Type the number of copies (1-999) that you want to print in this field.
Collate
Select this option to print sets of multi-page documents in the original page order. When this option is
selected, one complete copy of your document will print, and then reprint according to the number of
copies you choose. If this option is not selected, then each page will print according to the number of
copies chosen before the next page of the document is printed.
4. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts
its print settings according to the selected media type.
62
5. Resolution
Select the print resolution. As print resolution and speed are related, the higher the resolution, the longer it
will take to print the document.
6. Print Settings
Select the type of document you want to print.
Manual Settings...
Specify advanced settings such as brightness, contrast, and other settings.
Graphics
Use Printer Halftone
Select this option to use the printer driver to express halftones.
Brightness
Specify the brightness.
Contrast
Specify the contrast.
Graphics Quality
Select either Graphics or Text for the best print quality, based on the type of document you are
printing.
Improve Grey Printing
Select this option to improve the image quality of shaded areas.
Improve Pattern Printing
Select this option to improve the pattern printing if printed fills and patterns are different from the
fills and patterns you see on your computer screen.
Improve Thin Line
Select this option to improve the image quality of thin lines.
Use System Halftone
Select this option to use Windows® to express halftones.
TrueType Mode
Mode
Select how the fonts are processed for printing.
Use Printer TrueType Fonts
Select whether to use built-in fonts for the font processing.
7. Multiple Page
Select this option to print multiple pages on a single sheet of paper or print one page of your document on
multiple sheets.
Page Order
Select the page order when printing multiple pages on a single sheet of paper.
Border Line
Select the type of border to use when printing multiple pages on a single sheet of paper.
8. 2-sided / Booklet
Select this option to print on both sides of the paper or print a document in booklet format using 2-sided
printing.
2-sided Settings button
Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each
orientation.
63
9. Paper Source
Select the paper source setting according to your print conditions or purpose.
First Page
Select the paper source to use for printing the first page.
Other Pages
Select the paper source to use for printing the second and subsequent pages.
Advanced Tab
1. Scaling
Select these options to enlarge or reduce the size of the pages in your document.
Fit to Paper Size
Select this option to enlarge or reduce the document pages to fit a specified paper size. When you select
this option, select the paper size you want from the drop-down list.
Free
Select this option to enlarge or reduce the document pages manually. When you select this option, type a
value into the field.
2. Reverse Print
Select this option to rotate the printed image 180 degrees.
64
3. Use Watermark
Select this option to print a logo or text on your document as a watermark. Select one of the preset
watermarks, add a new watermark, or use an image file you have created.
4. Header-Footer Print
Select this option to print the date, time and PC login user name on the document.
5. Toner Save Mode
Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but are
still legible.
6. Secure Print
This feature ensures that confidential or sensitive documents do not print until you enter a password on the
machine's control panel.
7. Administrator
This feature allows you to change the administrator password and restrict various printing functions.
8. User Authentication
This feature allows you to confirm the restrictions for each user.
9. Output Tray (Available only for certain models)
Select the output tray for printed pages.
MX Stacker
Ejects paper into the standard output tray. When the standard output tray becomes full the printer
automatically selects the next available bin.
MX Sorter
When you print multiple copies, each copy is ejected onto a different bin from 1 to 4.
Use Std. Tray when full
Select this option to continue printing, even if the Mailbox bin is full. When you select this option, the
machine continues the print job, ejecting the remaining pages onto the machine's main output tray when
the Mailbox bin is full.
10. Other Print Options button
Sleep Time
Specify the amount of time that passes before the machine enters Sleep Mode.
Macro
Select this feature to print an electronic form (macro), which you have stored in your machine's memory,
as an overlay on the print job.
Density Adjustment
Specify the print density.
Improve Print Output
Select this option to reduce the amount of paper curling and improve the toner fixing.
Skip Blank Page
Select this option to allow the printer driver to automatically detect blank pages and exclude them from
printing.
Print Text in Black
Select this option when you want to print colour text in black.
Print Archive
Select this option to save the print data as a PDF file to your computer.
Eco settings
Select this option to reduce printing noise.
65
Related Information
•Print from Your Computer (Windows®)
•Print a Document (Windows®)
•Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows®)
•Print as a Poster (Windows®)
•Print on Both Sides of the Paper (Windows®)
•Print as a Booklet (Windows®)
•Use a Preset Print Profile (Windows®)
•Change the Default Print Settings (Windows®)
•Use Standard Tray When Full
•Assign a Mailbox Bin to a User or Group
•Mailbox Unit
66
Home > Print > Print from Your Computer (Macintosh)
Print from Your Computer (Macintosh)
•Print a Document (Macintosh)
•Print on Both Sides of the Paper (Macintosh)
•Print More Than One Page on a Single Sheet of Paper (N in 1) (Macintosh)
•Secure Print (Macintosh)
•Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™ language
emulation) (Macintosh)
•Monitor the Status of the Machine from Your Computer (Macintosh)
•Print Options (Macintosh)
67
Home > Print > Print from Your Computer (Macintosh) > Print a Document (Macintosh)
Print a Document (Macintosh)
1. Make sure you have loaded the correct size paper in the paper tray.
2. From an application, such as Apple TextEdit, click the File menu, and then select Print.
3. Select Brother XXX-XXXX (where XXXX is your model name).
4. Type the number of copies you want in the Copies field.
5. Click the Paper Size pop-up menu, and then select your paper size.
6. Select the Orientation option that matches the way you want the document to print.
7. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
8. Click the Media Type pop-up menu, and then select the type of paper you are using.
9. Change other printer settings, if needed.
10. Click Print.
Related Information
•Print from Your Computer (Macintosh)
•Print Options (Macintosh)
68
Home > Print > Print from Your Computer (Macintosh) > Print on Both Sides of the Paper (Macintosh)
Print on Both Sides of the Paper (Macintosh)
• Select A4 sized paper when using the automatic 2-sided printing function.
• Make sure the back cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper or thin paper. DO NOT use bond paper.
• If the paper is too thin, it may wrinkle.
• When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print
quality.
1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother XXX-XXXX (where XXXX is your model name).
3. Select the Orientation option that matches the way you want the document to print.
4. For automatic 2-sided printing, do the following:
a. Click the application pop-up menu, and then select Layout.
The Layout setting options appear.
b. In the Two-Sided section, select the Short-Edge binding or Long-Edge binding option.
c. Change other printer settings, if needed.
d. Click Print.
5. For manual 2-sided printing, do the following:
a. Click the application pop-up menu, and then select Paper Handling.
The Paper Handling options appear.
b. In the Pages to Print pop-up menu, select Even Only.
c. Change other print settings, if needed.
d. Click the Print button.
e. After the machine prints the even-numbered pages, remove the printed pages from the output paper tray.
f. Make sure the pages are completely flat, and put the paper back in the tray, blank side facing down.
g. Repeat steps 1-3, selecting the same printer and settings you used to print the even-numbered pages.
h. Click the application pop-up menu, and then select Paper Handling. The Paper Handling options
appear.
i. In the Pages to Print pop-up menu, select Odd Only.
j. Click Print.
69
Home > Print > Print from Your Computer (Macintosh) > Print More Than One Page on a Single Sheet of
Paper (N in 1) (Macintosh)
Print More Than One Page on a Single Sheet of Paper (N in 1)
(Macintosh)
1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother XXX-XXXX (where XXXX is your model name).
3. Click the application pop-up menu, and then select Layout.
The Layout setting options appear.
4. Click the Pages per Sheet pop-up menu, and then select the number of pages to print on each sheet.
5. Select the Layout Direction option.
6. Click the Border pop-up menu, and then select your border line type.
7. Change other printer settings if needed.
8. Click Print.
Related Information
•Print from Your Computer (Macintosh)
•Print Options (Macintosh)
71
Home > Print > Print from Your Computer (Macintosh) > Secure Print (Macintosh)
Secure Print (Macintosh)
Use Secure Print to ensure that confidential or sensitive documents do not print until you enter a password on
the machine's control panel.
• The secure data is deleted from the machine when you turn off the machine.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother XXX-XXXX (where XXXX is your model name).
3. Click the application pop-up menu, and then select the Secure Print option. The Secure Print options
appear.
4. Select the Secure Print check box.
5. Type your user name, job name and a four-digit password.
6. Click Print.
7. On the machine's control panel, press Secure.
8. Press a or b to display your user name, and then press OK.
The LCD displays the list of secured jobs for that name.
9. Press a or b to display the job, and then press OK.
10. Enter your four-digit password.
To enter each digit, press a or b to select a number, and then press OK.
11. Press a or b to select the [Print] option, and then press OK.
12. Press a or b to enter the number of copies you want.
13. Press OK.
The machine prints the data.
After you print the secured data, it will be cleared from the machine's memory.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. From an application, such as Apple TextEdit, click the File menu, and then select Print.
2. Select Brother XXX-XXXX (where XXXX is your model name).
3. Click the application pop-up menu, and then select the Secure Print option. The Secure Print options
appear.
4. Select the Secure Print check box.
5. Type your user name, job name and a four-digit password.
6. Click Print.
7. On the machine's control panel, press [Functions].
8. Press [Secure].
9. Press a or b to display user names, and then press your user name.
The LCD displays the list of secured jobs for that name.
10. Press a or b to display the print job you want to print, and then press it.
11. Enter your four-digit password, and then press [OK].
12. Enter the number of copies you want.
13. Press [Start].
The machine prints the data.
72
Home > Print > Print from Your Computer (Macintosh) > Print a Document Using the BR-Script3 Printer
Driver (PostScript® 3™ language emulation) (Macintosh)
Print a Document Using the BR-Script3 Printer Driver (PostScript® 3™
language emulation) (Macintosh)
The BR-Script3 printer driver lets you print PostScript® data more clearly.
• Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the
PS driver (BR-Script3 printer driver).
• Make sure you have added the BR-Script3 printer driver from Print & Scan or Printers & Scanners in the
System Preferences list on your Macintosh.
1. Make sure you have loaded the correct size paper in the paper tray.
2. From an application, such as Apple TextEdit, click the File menu, and then select Print.
3. Select Brother XXX-XXXX (where XXXX is your model name).
4. Type the number of copies you want in the Copies field.
5. Click the Paper Size pop-up menu, and then select your paper size.
6. Select the Orientation option that matches the way you want the document to print.
7. Click the print options pop-up menu, and then click Printer Features.
The Printer Features options appear.
8. Click the Print Quality pop-up menu, and then select the resolution.
9. Click the Media Type pop-up menu, and then select the type of paper you are using.
10. Change other printer settings, if needed.
11. Click Print.
Related Information
•Print from Your Computer (Macintosh)
74
Home > Print > Print from Your Computer (Macintosh) > Monitor the Status of the Machine from Your
Computer (Macintosh)
Monitor the Status of the Machine from Your Computer (Macintosh)
The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get
immediate notification of error messages, such as paper empty or paper jam, at preset update intervals. You can
also access Web Based Management.
1. Click the System Preferences menu, select Print & Scan or Printers & Scanners, and then select your
machine.
2. Click the Options & Supplies button.
3. Click the Utility tab, and then click the Open Printer Utility button.
Status Monitor starts.
Troubleshooting
Click the Troubleshooting button to access the troubleshooting website.
Visit the Genuine Supplies website
Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies.
Updating the machine's status
To view the latest machine status while the Status Monitor window is open, click the icon. You can set
the interval at which the software updates machine status information. Click Brother Status Monitor in
the menu bar, and then select Preferences.
Web Based Management (Network Connection Only)
Access the Web Based Management System by clicking the machine icon on the Status Monitor screen.
You can use a standard Web Browser to manage your machine using HTTP (Hyper Text Transfer
Protocol).
Related Information
•Print from Your Computer (Macintosh)
•Printing Problems
75
Home > Print > Print from Your Computer (Macintosh) > Print Options (Macintosh)
Print Options (Macintosh)
Page Setup
1. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a
custom paper size.
2. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
3. Scale
Type a value into the field to enlarge or reduce the pages in your document to fit the selected paper size.
76
Layout
1. Pages per Sheet
Select the number of pages to print on a single sheet of paper.
2. Layout Direction
Select the page order when printing multiple pages on a single sheet of paper.
3. Border
Select the type of border to use when printing multiple pages on a single sheet of paper.
4. Two-Sided (Available only for certain models)
Select whether to print on both sides of the paper.
5. Reverse page orientation
Select this option to rotate the printed image 180 degrees.
6. Flip horizontally
Select this option to reverse the printed image on the page horizontally from left to right.
77
Paper Handling
1. Collate pages
Select this option to print sets of multi-page documents in the original page order. When this option is
selected, one complete copy of your document will print, and then reprint according to the number of copies
you choose. If this option is not selected, then each page will print according to the number of copies chosen
before the next page of the document is printed.
2. Pages to Print
Select which pages you want to print (even pages or odd pages).
3. Page Order
Select the page order.
4. Scale to fit paper size
Select this option to enlarge or reduce the pages in your document to fit the selected paper size.
5. Destination Paper Size
Select the paper size to print on.
6. Scale down only
Select this option if you want to reduce the pages in your document when they are too large for the selected
paper size. If this option is selected and the document is formatted for a paper size that is smaller than the
paper size you are using, the document will be printed at its original size.
78
Print Settings
1. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts
its print settings according to the selected media type.
2. Print Quality
Select the print resolution you want. Because print quality and speed are related, the higher the quality, the
longer it will take to print the document.
3. Paper Source
Select the paper source setting according to your print conditions or purpose.
4. Output Tray (Available only for certain models)
Select the output tray for printed pages.
MX Stacker
Ejects paper into the standard output tray. When the standard output tray becomes full the printer
automatically selects the next available bin.
MX Sorter
When you print multiple copies, each copy is ejected onto a different bin from 1 to 4.
Use Std. Tray when full
Select this option to continue printing, even if the Mailbox bin is full. When you select this option, the
machine continues the print job, ejecting the remaining pages onto the machine's main output tray when
the Mailbox bin is full.
5. Advanced
Toner Save Mode
Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but
are still legible.
Graphics Quality
Select either Graphics or Text for the best print quality, based on the type of document you are printing.
Improve Print Output
Select this option to reduce the amount of paper curling and improve the toner fixing.
Density Adjustment
Specify the print density.
79
Sleep Time
Specify the amount of time that passes before the machine enters Sleep Mode.
Quiet Mode
Select this option to reduce printing noise.
Other Print Options
Skip Blank Page
Select this option to allow the printer driver to automatically detect blank pages and exclude them from
printing.
Secure Print
1. Secure Print
This feature ensures that confidential or sensitive documents do not print until you enter a password on the
machine's control panel.
80
Home > Print > Print One Page Duplicates on Different Types of Paper
Print One Page Duplicates on Different Types of Paper
Use the Carbon Copy function to make multiple copies of the same print data, as if printing on carbon paper.
Send the data to individual paper trays that you pre-loaded with different paper types or colours.
For example, you may want to set the machine to send your print data to Tray1, which you have pre-loaded with
blue coloured paper, and then reprint the data in a certain location on the page from the MP Tray, which you
have pre-loaded with yellow coloured paper that already contains text.
If you load blue paper in Tray 1 and yellow paper in the MP tray, the printer will automatically feed paper for
Sheet 1 from Tray 1 and Sheet 2 from the MP Tray.
If you enable the Carbon Copy function, the machine will always make copies automatically.
(Windows®)
The carbon copy function also allows you to select a different printing macro for each page.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [Print Menu] option, and then press OK.
2. Press a or b to display the [Carbon Menu] option, and then press OK.
3. Press a or b to display the [Carbon Copy] option, and then press OK.
4. Press a or b to display the [On] option, and then press OK.
5. Press a or b to display the [Copies] option, and then press OK.
6. Press a or b to enter the number of copies you want, and then press OK.
7. Press a or b to display the [Copy1 Tray] option, and then press OK.
8. Press a or b to display the paper tray you want to configure as [Copy1 Tray], and then press OK.
(Windows®)
a. Press a or b to display the [Copy1 Macro] option, and then press OK.
b. Press a or b to display the ID number of the macro you want to use, and then press OK.
9. Repeat these steps until you have selected all the tray settings for each copy.
10. Send your print job to the machine.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Print Menu] > [Carbon Menu] > [Carbon Copy] > [On].
2. Press a or b to display the [Copies] option, and then press the [Copies] option.
3. Enter the number of copies you want, and then press [OK].
4. Press a or b to display the [Copy1 Tray] option, and then press the [Copy1 Tray] option.
5. Press a or b to display the paper tray you want to configure as [Copy1 Tray], and then press the paper
tray.
(Windows®)
a. Press a or b to display the [Copy1 Macro] option, and then press the [Copy1 Macro] option.
b. Press a or b to display the ID number of the macro you want to use, and then press it.
6. Repeat these steps until you have selected all the tray settings for each copy.
7. Send your print job to the machine.
82
Home > Print > Cancel a Print Job
Cancel a Print Job
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press Cancel.
To cancel multiple print jobs, press and hold Cancel for four seconds.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press .
To cancel multiple print jobs, press and hold for four seconds.
Related Information
•Print
•Printing Problems
84
Home > Print > Test Print
Test Print
If there are problems with print quality, follow these instructions to do a test print.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [Machine Info.] option, and then press OK.
2. Press a or b to display the [Test Print] option, and then press OK.
The machine prints the test page.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Machine Information] > [Test Print].
2. Press [OK].
3. Press .
Related Information
•Print
•Improve the Print Quality
85
Home > Network > Get Started
Get Started
We recommend setting up and connecting to your network using the Brother installation CD-ROM. This section
provides more information about network connection types, introduces various methods to manage your network
and explains some useful network features of your Brother machine.
•Supported Basic Network Features
87
Home > Network > Get Started > Supported Basic Network Features
Supported Basic Network Features
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The print server supports various features depending on the operating system. Use this table to see which
network features and connections are supported by each operating system.
Operating Systems Windows® XP
Windows Vista®
Windows® 7
Windows® 8
Windows Server®
2003/2008/2012/2012 R2
OS X v10.8.5
OS X v10.9.x
OS X v10.10.x
Printing Yes Yes Yes
BRAdmin Light Yes Yes
BRAdmin Professional 3 Yes Yes
Web Based Management Yes Yes Yes
Status Monitor Yes Yes
Driver Deployment Wizard Yes Yes
Vertical Pairing (Windows® 7
and Windows® 8 only)
Yes
• Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to
download the latest version of Brother's BRAdmin Light.
• Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to
download the latest version of Brother's BRAdmin Professional 3 utility.
Related Information
•Get Started
88
Home > Network > Network Management Software and Utilities
Network Management Software and Utilities
Configure and change your Brother machine's network settings using a management utility.
•Learn about Network Management Software and Utilities
•Change Machine Settings from Your Computer
•Change Machine Settings Using Web Based Management
89
Home > Network > Network Management Software and Utilities > Learn about Network Management
Software and Utilities
Learn about Network Management Software and Utilities
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Web Based Management
Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper
Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your
machine's IP address into your web browser to access and change your print server settings.
BRAdmin Light (Windows®)
BRAdmin Light is a utility for the initial setup of Brother network-connected devices. This utility can search for
Brother products on your network, view the status and configure the basic network settings, such as IP address.
Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download
BRAdmin Light.
• If you are using Windows® Firewall, or the firewall function of an anti-spyware or antivirus application,
temporarily disable them. When you are sure you can print, configure the software settings following the
instructions.
BRAdmin Professional 3 (Windows®)
BRAdmin Professional 3 is a utility for more advanced management of network-connected Brother devices. This
utility can search for Brother products on your network and view the device status from an easy-to-read
Windows® Explorer-style screen that changes colour to identify the status of each device. You can configure
network and device settings, and update device firmware from a Windows® computer on your LAN. BRAdmin
Professional 3 can also log activity of Brother devices on your network and export the log data in an HTML, CSV,
TXT, or SQL format. For users who want to monitor locally-connected machines, install the Print Auditor Client
software on the client computer. This utility allows you to use BRAdmin Professional 3 to monitor machines that
are connected to a client computer via the USB interface.
• Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to
download the latest version of Brother's BRAdmin Professional 3 utility.
• Node name: The node name appears in the current BRAdmin Professional 3 window. The default node
name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where
"xxxxxxxxxxxx" is your machine's MAC Address / Ethernet address).
• If you are using Windows® Firewall, or the firewall function of an anti-spyware or antivirus application,
temporarily disable them. When you are sure you can print, configure the software settings following the
instructions.
Related Information
•Network Management Software and Utilities
90
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network
Additional Methods of Configuring Your Brother Machine for a Wireless
Network
To connect your machine to your wireless network, we recommend using the Installation CD-ROM.
•Before Configuring Your Brother Machine for a Wireless Network
•Configure Your Machine for a Wireless Network
•Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi
Protected Setup™ (WPS)
•Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected
Setup™ (WPS)
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
•Configure Your Machine for a Wireless Network Using the Machine's Control Panel
Setup Wizard
•Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
•Configure Your Machine for an Enterprise Wireless Network
•Use Wi-Fi Direct®
91
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Before Configuring Your Brother Machine for a Wireless Network
Before Configuring Your Brother Machine for a Wireless Network
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Before attempting to configure a wireless network, confirm the following:
• Before configuring wireless settings, you must know your Network name (SSID) and Network Key. If you are
using an enterprise wireless network, you must know the User ID and Password.
If you do not know the security information, please consult the router manufacture, your system
administrator, or your Internet provider.
• To achieve optimum results with normal everyday document printing, place the Brother machine as close to
the wireless LAN access point/router as possible with minimal obstructions. Large objects and walls between
the two devices and interference from other electronic devices can affect the data transfer speed of your
documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics,
you may want to consider selecting wired Ethernet for faster data transfer (supported models only), or USB
for the fastest throughput speed.
• Although the Brother machine can be used in both a wired and wireless network (supported models only),
only one connection method can be used at a time. However, a wireless network connection and Wi-Fi Direct
connection, or a wired network connection (supported models only) and Wi-Fi Direct connection can be used
at the same time.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
92
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network
Configure Your Machine for a Wireless Network
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Turn on your computer and put the Brother Installation CD-ROM into your CD-ROM drive.
• For Windows®, follow these instructions.
• For Macintosh, click Driver Download to go to the Brother Solutions Center. Follow the on-screen
instructions to install printer drivers.
2. The opening screen appears automatically.
Choose your language, and then follow the on-screen instructions.
• (Windows® XP)
If the Brother screen does not appear automatically, go to My Computer. Double-click the CD-ROM
icon, and then double-click start.exe.
• (Windows Vista® and Windows®7)
If the Brother screen does not appear automatically, go to Computer. Double-click the CD-ROM icon,
and then double-click start.exe.
• (Windows® 8)
Click the (File Explorer) icon on the taskbar, and then go to Computer (This PC). Double-click the
CD-ROM icon, and then double-click start.exe.
• If the User Account Control screen appears, do one of the following:
- (Windows Vista®) Click Allow.
- (Windows® 7/Windows® 8) Click Yes.
3. Choose Wireless Network Connection (Wi-Fi), and then click Next.
4. Follow the on-screen instructions.
After you have completed the wireless setup, the installer program walks you through installing the drivers. Click
Next in the installation dialog box and follow the on-screen instructions.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
93
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
Setup™ (WPS)
Configure Your Machine for a Wireless Network Using the One Push
Method of Wi-Fi Protected Setup™ (WPS)
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your wireless access point/router supports WPS (Push Button Configuration), you can use WPS from your
machine's control panel menu to configure your wireless network settings.
Routers or access points that support WPS are marked with this symbol:
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [WLAN] option, and then press OK.
3. Press a or b to select the [WPS] option, and then press OK.
4. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
5. When the LCD displays [Press Key on rtr], press the WPS button on your wireless access point/router.
Press a on the machine's control panel. Your machine will automatically detect your wireless access point/
router and try to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Network] > [WLAN] > [WPS].
2. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. When the Touchscreen displays [Start WPS on your wireless access point/router, then
press [OK]], press the WPS button on your wireless access point/router. Then press [OK] on your
machine. Your machine will automatically detect your wireless access point/router and try to connect to your
wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
94
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
•Wireless LAN Report Error Codes
95
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™
(WPS)
Configure Your Machine for a Wireless Network Using the PIN Method
of Wi-Fi Protected Setup™ (WPS)
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN)
Method to configure your wireless network settings.
The PIN Method is one of the connection methods developed by the Wi-Fi Alliance®. By submitting a PIN
created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can set up
the wireless network and security settings. For more information on how to access WPS mode, see the
instructions provided with your wireless access point/router.
Type A
Connection when the wireless LAN access point/router (1) doubles as Registrar.
1
Type B
Connection when another device (2), such as a computer, is used as Registrar.
96
2
Routers or access points that support WPS are marked with this symbol:
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [WLAN] option, and then press OK.
3. Press a or b to select the [WPS w/PIN Code] option, and then press OK.
4. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
5. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
6. Using a computer that is on the network, type "http://access point's IP address" in your browser (where
"access point's IP address" is the IP address of the device that is being used as the Registrar).
7. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
• The Registrar is usually the wireless LAN access point/router.
• The settings page will differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows Vista®, Windows® 7, or Windows® 8 computer as a Registrar, complete the
following steps:
8. Do one of the following:
• (Windows Vista®)
97
Click (Start) > Network > Add a wireless device.
• (Windows® 7)
Click (Start) > Devices and Printers > Add a device.
• (Windows® 8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
• To use a Windows Vista®, Windows® 7, or Windows® 8 computer as a Registrar, you must register it to
your network in advance. For more information, see the instructions supplied with your wireless LAN
access point/router.
• If you use Windows® 7 or Windows® 8 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. To install the full driver and software package, use
the Brother Installation CD-ROM.
9. Select your machine and click Next.
10. Type the PIN displayed on the machine's LCD, and then click Next.
11. Select your network, and then click Next.
12. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Network] > [WLAN] > [WPS w/PIN Code].
2. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer that is on the network, type "http://access point's IP address" in your browser (where
"access point's IP address" is the IP address of the device that is being used as the Registrar).
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
• The Registrar is usually the wireless LAN access point/router.
• The settings page will differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows Vista®, Windows® 7, or Windows® 8 computer as a Registrar, complete the
following steps:
6. Do one of the following:
• (Windows Vista®)
Click (Start) > Network > Add a wireless device.
• (Windows® 7)
Click (Start) > Devices and Printers > Add a device.
• (Windows® 8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
98
• To use a Windows Vista®, Windows® 7, or Windows® 8 computer as a Registrar, you must register it to
your network in advance. For more information, see the instructions supplied with your wireless LAN
access point/router.
• If you use Windows® 7 or Windows® 8 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. To install the full driver and software package, use
the Brother Installation CD-ROM.
7. Select your machine and click Next.
8. Type the PIN displayed on the machine's LCD, and then click Next.
9. Select your network, and then click Next.
10. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
•Wireless LAN Report Error Codes
99
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For
IEEE 802.11b/g/n)
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
100
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/
n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using
a New SSID
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
You must connect to a new SSID from your computer when it is configured for Ad-Hoc mode.
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [WLAN] option, and then press OK.
3. Press a or b to select the [Setup Wizard] option, and then press OK.
4. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
5. The machine will search for your network and display a list of available SSIDs. Press a or b to select the
[<New SSID>] option, and then press OK.
6. Enter the SSID name, and then press OK.
7. Press a or b to select the [Ad-hoc] option, and then press OK.
8. Press a or b to select the Encryption Type [None] or [WEP], and then press OK.
9. If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK.
Your Brother machine supports the use of the first WEP key only.
10. To apply the settings, press a. To cancel, press b.
11. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Network] > [WLAN] > [Setup Wizard].
2. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. The machine will search for your network and display a list of available SSIDs. Press a or b to display the
[<New SSID>] option.
4. Press [<New SSID>].
5. Enter the SSID name, and then press [OK].
For more information about how to enter text, see the User's Guide.
6. Press [Ad-hoc].
7. Press either [None] or [WEP] to select Encryption Type.
101
8. If you selected [WEP] for Encryption Type, enter the WEP key, and then press [OK].
• For more information about how to enter text, see the User's Guide.
• Your Brother machine supports the use of the first WEP key only.
9. To apply the settings, press [Yes]. To cancel, press [No].
10. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
•How to Enter Text on Your Brother Machine
•Wireless LAN Report Error Codes
102
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/
n) > Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using
an Existing SSID
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured
SSID, use these instructions.
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an
SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see
the instructions included with your computer or contact your network administrator.
Network Name (SSID)
Communication Mode Encryption Mode Network Key
Ad-Hoc NONE -
WEP
For example:
Network Name (SSID)
HELLO
Communication Mode Encryption Mode Network Key
Ad-Hoc WEP 12345
Your Brother machine supports the use of the first WEP key only.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a or b to select the [WLAN] option, and then press OK.
4. Press a or b to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
6. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press a or b to select the SSID you want.
7. Press OK.
8. Enter the WEP key, and then press OK.
To apply the settings, press a. To cancel, press b.
Your Brother machine supports the use of the first WEP key only.
103
9. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
The wireless network settings of the computer you are connecting with must be set to Ad-Hoc mode with an
SSID already configured. For more information on how to configure your computer in Ad-Hoc mode, see
the instructions included with your computer or contact your network administrator.
Network Name (SSID)
Communication Mode Encryption Mode Network Key
Ad-Hoc NONE -
WEP
For example:
Network Name (SSID)
HELLO
Communication Mode Encryption Mode Network Key
Ad-Hoc WEP 12345
Your Brother machine supports the use of the first WEP key only.
2. Press [Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press a or b to select the SSID you want, and then press the SSID.
Enter the WEP key, and then press [OK].
To apply the settings, press [Yes]. To cancel, press [No].
• For more information about how to enter text, see the User's Guide.
• Your Brother machine supports the use of the first WEP key only.
5. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
104
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
Configure Your Machine for a Wireless Network Using the Machine's
Control Panel Setup Wizard
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
• Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
• If you need assistance during setup and want to contact Brother customer service, make sure you have
your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
- Check the documentation provided with your wireless access point/router.
- The initial SSID could be the manufacturer's name or the model name.
- If you do not know the security information, please consult the router manufacture, your system
administrator, or your Internet provider.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a or b to select the [WLAN] option, and then press OK.
4. Press a or b to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
6. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press a or b to select the SSID you want.
7. Press OK.
8. Do one of the following:
• If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
106
Enter the key, and then press OK to apply your settings.
To apply the settings, press a. To cancel, press b.
• If your authentication method is Open System and your encryption mode is None, go to the next step.
9. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
• Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
• If you need assistance during setup and want to contact Brother customer service, make sure you have
your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
- Check the documentation provided with your wireless access point/router.
- The initial SSID could be the manufacturer's name or the model name.
- If you do not know the security information, please consult the router manufacture, your system
administrator, or your Internet provider.
2. Press [Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs.
If a list of SSIDs is displayed, press a or b to display the SSID to which you want to connect, and then press
the SSID.
5. Do one of the following:
• If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
When you have entered all the characters, press [OK] and then press [Yes] to apply your settings.
107
• If your authentication method is Open System and your encryption mode is None, go to the next step.
6. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
•How to Enter Text on Your Brother Machine
•Wireless LAN Report Error Codes
108
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure Open System NONE -
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP
(TKIP is supported for
WPA-PSK only.)
For example:
Network Name (SSID)
HELLO
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure WPA2-PSK AES 12345678
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a or b to select the [WLAN] option, and then press OK.
4. Press a or b to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
6. The machine will search for your network and display a list of available SSIDs. Press a or b to select the
[<New SSID>] option, and then press OK.
7. Enter the SSID name, and then press OK.
8. Press a or b to select the [Infrastructure] option, and then press OK.
9. Press a or b to select the Authentication Method you want, and then press OK.
10. Do one of the following:
• If you selected the [Open System] option, press a or b to select the Encryption Type [None] or [WEP],
and then press OK.
109
If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press OK.
• If you selected the [Shared Key] option, enter the WEP key, and then press OK.
• If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption Type [TKIP+AES] or
[AES], and then press OK.
Enter the WPA key, and then press OK.
Your Brother machine supports the use of the first WEP key only.
11. To apply the settings, press a. To cancel, press b.
12. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure Open System NONE -
WEP
Shared Key WEP
WPA/WPA2-PSK AES
TKIP
(TKIP is supported for
WPA-PSK only.)
For example:
Network Name (SSID)
HELLO
Communication Mode Authentication Method Encryption Mode Network Key
Infrastructure WPA2-PSK AES 12345678
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press [Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. Press a or b to display the
[<New SSID>] option.
5. Press [<New SSID>].
6. Enter the SSID name, and then press [OK].
110
For more information about how to enter text, see the User's Guide.
7. Press [Infrastructure].
8. Press a or b to display the Authentication Method you want.
9. Press the Authentication Method you want.
10. Do one of the following:
• If you selected the [Open System] option, press either [None] or [WEP].
If you selected the [WEP] option for Encryption Type, enter the WEP key, and then press [OK].
• If you selected the [Shared Key] option, enter the WEP key, and then press [OK].
• If you selected the [WPA/WPA2-PSK] option, press either [TKIP+AES] or [AES] for Encryption Type.
Enter the WPA key, and then press [OK].
• For more information about how to enter text, see the User's Guide.
• Your Brother machine supports the use of the first WEP key only.
11. To apply the settings, press [Yes]. To cancel, press [No].
12. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
•I Cannot Complete the Wireless Network Setup Configuration
•How to Enter Text on Your Brother Machine
•Wireless LAN Report Error Codes
111
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless
Network > Configure Your Machine for an Enterprise Wireless Network
Configure Your Machine for an Enterprise Wireless Network
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication
Mode
Authentication
Method
Encryption Mode User ID Password
Infrastructure LEAP CKIP
EAP-FAST/NONE AES
TKIP
EAP-FAST/MS-
CHAPv2
AES
TKIP
EAP-FAST/GTC AES
TKIP
PEAP/MS-CHAPv2 AES
TKIP
PEAP/GTC AES
TKIP
EAP-TTLS/CHAP AES
TKIP
EAP-TTLS/MS-
CHAP
AES
TKIP
EAP-TTLS/MS-
CHAPv2
AES
TKIP
EAP-TTLS/PAP AES
TKIP
EAP-TLS AES -
TKIP -
For example:
Network Name (SSID)
HELLO
112
Communication
Mode
Authentication
Method
Encryption Mode User ID Password
Infrastructure EAP-FAST/MS-
CHAPv2
AES Brother 12345678
• If you configure your machine using EAP-TLS authentication, you must install the client certificate
issued by a CA before you start configuration. Contact your network administrator about the client
certificate. If you have installed more than one certificate, we recommend writing down the certificate
name you want to use.
• If you verify your machine using the common name of the server certificate, we recommend writing
down the common name before you start configuration. Contact your network administrator about the
common name of the server certificate.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a or b to select the [WLAN] option, and then press OK.
4. Press a or b to select the [Setup Wizard] option, and then press OK.
5. When [WLAN Enable?] appears, press a to select On.
This will start the wireless setup wizard. To cancel, press Cancel.
6. The machine will search for your network and display a list of available SSIDs. Press a or b to select the
[<New SSID>] option, and then press OK.
7. Enter the SSID name, and then press OK.
8. Press a or b to select the [Infrastructure] option, and then press OK.
9. Press a or b to select the Authentication Method you want, and then press OK.
10. Do one of the following:
• If you selected the [LEAP] option, enter the user ID, and then press OK.
Enter the Password, and then press OK.
• If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press a or b to select the Inner
Authentication Method [NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [PAP] or [GTC], and then press
OK.
Depending on your Authentication Method, the Inner Authentication Method selections differ.
Press a or b to select the Encryption Type [TKIP+AES] or [AES], and then press OK.
Press a or b to select the Verification Method [No Verification], [CA] or [CA+Server ID], and
then press OK.
- If you selected the [CA+Server ID] option, enter the server ID, user ID and password (if required),
and then press OK for each option.
- For other selections, enter the user ID and the Password, and then press OK for each option.
If you have not imported a CA certificate into your machine, the machine will display the message [No
Verification].
• If you selected the [EAP-TLS] option, press a or b to select the Encryption Type [TKIP+AES] or [AES],
and then press OK.
When the machine displays a list of available Client Certificates, select the certificate you want.
Press a or b to select the Verification Method [No Verification], [CA] or [CA+Server ID], and
then press OK.
- If you selected the [CA+Server ID] option, enter the server ID and user ID, and then press OK for
each option.
- For other selections, enter the user ID, and then press OK.
113
If you have not imported a CA certificate into your machine, the machine will display the message [No
Verification].
11. To apply the settings, press a. To cancel, press b.
12. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication
Mode
Authentication
Method
Encryption Mode User ID Password
Infrastructure LEAP CKIP
EAP-FAST/NONE AES
TKIP
EAP-FAST/MS-
CHOPv2
AES
TKIP
EAP-FAST/GTC AES
TKIP
PEAP/MS-CHAPv2 AES
TKIP
PEAP/GTC AES
TKIP
EAP-TTLS/CHAP AES
TKIP
EAP-TTLS/MS-
CHAP
AES
TKIP
EAP-TTLS/MS-
CHAPv2
AES
TKIP
EAP-TTLS/PAP AES
TKIP
EAP-TLS AES -
TKIP -
For example:
Network Name (SSID)
HELLO
114
Communication
Mode
Authentication
Method
Encryption Mode User ID Password
Infrastructure EAP-FAST/MS-
CHOPv2
AES Brother 12345678
• If you configure your machine using EAP-TLS authentication, you must install the client certificate
issued by a CA before you start configuration. Contact your network administrator about the client
certificate. If you have installed more than one certificate, we recommend writing down the certificate
name you want to use.
• If you verify your machine using the common name of the server certificate, we recommend writing
down the common name before you start configuration. Contact your network administrator about the
common name of the server certificate.
2. Press [Settings] > [Network] > [WLAN] > [Setup Wizard].
3. When [Switch network interface to wireless?] appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs. Press a or b to display the
[<New SSID>] option.
5. Press [<New SSID>].
6. Enter the SSID name, and then press [OK].
For more information about how to enter text, see the User's Guide.
7. Press [Infrastructure].
8. Press a or b to display the Authentication Method you want.
9. Press the Authentication Method you want.
10. Do one of the following:
• If you selected the [LEAP] option, enter the user ID, and then press [OK]. Enter the Password, and then
press [OK].
• If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press a or b to select the Inner
Authentication Method [NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP].
Depending on your Authentication Method, the Inner Authentication Method selections differ.
Press a or b to select the Encryption Type [TKIP+AES] or [AES].
Press a or b to select the Verification Method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID, user ID and password (if
required), and then press [OK] for each option.
- For other selections, enter the user ID and Password, and then press [OK] for each option.
If you have not imported a CA certificate into your machine, the machine will display the message [No
Verification].
• If you selected the [EAP-TLS] option, press a or b to select the Encryption Type [TKIP+AES] or [AES].
When the machine displays a list of available Client Certificates, select the certificate you want.
Press a or b to select the Verification Method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID and user ID, and then press [OK]
for each option.
- For other selections, enter the user ID, and then press [OK].
If you have not imported a CA certificate into your machine, the machine will display the message [No
Verification].
115
11. To apply the settings, press [Yes]. To cancel, press [No].
12. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your
device.
Related Information
•Additional Methods of Configuring Your Brother Machine for a Wireless Network
•Wireless LAN Report Error Codes
116
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Print from Your Mobile Device Using Wi-Fi Direct
Print from Your Mobile Device Using Wi-Fi Direct
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance®. It allows you to
configure a secured wireless network between your Brother machine and a mobile device, such as an Android™
device, Windows Phone® device, iPhone, iPod touch, or iPad, without using an access point. Wi-Fi Direct
supports wireless network configuration using the one-push or PIN Method of Wi-Fi Protected Setup™ (WPS).
You can also configure a wireless network by manually setting an SSID and password. Your Brother machine's
Wi-Fi Direct feature supports WPA2™ security with AES encryption.
2
1
1. Mobile device
2. Your Brother machine
• Although the Brother machine can be used in both a wired and wireless network, only one connection
method can be used at a time. However, a wireless network connection and Wi-Fi Direct connection, or
a wired network connection (supported models only) and Wi-Fi Direct connection can be used at the
same time.
• The Wi-Fi Direct-supported device can become a Group Owner (G/O). When configuring the Wi-Fi
Direct network, the G/O serves as an access point.
• Ad-hoc mode and Wi-Fi Direct cannot be used at the same time. Disable one function to enable the
other. If you want to use Wi-Fi Direct while you are using Ad-hoc mode, set Network I/F to Wired LAN or
disable Ad-hoc mode and connect your Brother machine to the access point.
Related Information
•Use Wi-Fi Direct®
118
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network
Configure Your Wi-Fi Direct Network
Configure your Wi-Fi Direct network settings from your machine's control panel.
•Wi-Fi Direct Network Configuration Overview
•Configure Your Wi-Fi Direct Network Using the One-Push Method
•Configure Your Wi-Fi Direct Network Using the One-Push Method and Wi-Fi Protected
Setup™ (WPS)
•Configure Your Wi-Fi Direct Network Using the PIN Method
•Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™
(WPS)
•Configure Your Wi-Fi Direct Network Manually
119
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Wi-Fi Direct Network Configuration Overview
Wi-Fi Direct Network Configuration Overview
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The following instructions offer five methods for configuring your Brother machine in a wireless network
environment. Select the method you prefer for your environment.
Check your mobile device for configuration.
1. Does your mobile device support Wi-Fi Direct?
Option Description
Yes Go to Step 2
No Go to Step 3
2. Does your mobile device support one-push configuration for Wi-Fi Direct?
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-
Push Method.
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method.
3. Does your mobile device support Wi-Fi Protected Setup™ (WPS)?
Option Description
Yes Go to Step 4
No See Related Information: Configure Your Wi-Fi Direct Network Manually.
4. Does your mobile device support one-push configuration for Wi-Fi Protected Setup™ (WPS)?
Option Description
Yes See Related Information: Configure Your Wi-Fi Direct Network Using the One-
Push Method and Wi-Fi Protected Setup™ (WPS).
No See Related Information: Configure Your Wi-Fi Direct Network Using the PIN
Method of Wi-Fi Protected Setup™ (WPS).
To use Brother iPrint&Scan functionality in a Wi-Fi Direct network configured by one-push configuration using Wi-
Fi Direct or by PIN Method configuration using Wi-Fi Direct, the device you use to configure Wi-Fi Direct must be
running Android™ 4.0 or greater.
Related Information
•Configure Your Wi-Fi Direct Network
•Configure Your Wi-Fi Direct Network Using the One-Push Method
•Configure Your Wi-Fi Direct Network Using the One-Push Method and Wi-Fi Protected Setup™ (WPS)
•Configure Your Wi-Fi Direct Network Using the PIN Method
•Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
120
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-
Push Method
Configure Your Wi-Fi Direct Network Using the One-Push Method
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Push Button] option, and then press OK.
4. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD.
Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
6. Do one of the following:
• When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
• When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Press a or b to select the mobile device you want to connect to and press OK.
Search for available devices again by pressing [Rescan].
7. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For information on printing from your mobile device, go to your model's
Manuals page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for
Brother iPrint&Scan.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [Push Button].
2. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
3. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then press [OK].] appears on the machine's
LCD. Press [OK] on your Brother machine.
This will start the Wi-Fi Direct setup. To cancel, press .
4. Do one of the following:
• When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
• When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Select the mobile device you want to connect to and press [OK]. Search for
available devices again by pressing [Rescan].
5. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother
iPrint&Scan.
122
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-
Push Method and Wi-Fi Protected Setup™ (WPS)
Configure Your Wi-Fi Direct Network Using the One-Push Method and
Wi-Fi Protected Setup™ (WPS)
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network:
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Group Owner] option, and then press OK.
4. Press a or b to select the [On] option, and then press OK.
5. Press a or b to select the [Push Button] option, and then press OK.
6. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
7. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the
machine's LCD. Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For information on printing from your mobile device, go to your model's
Manuals page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for
Brother iPrint&Scan.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network.
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].
2. Press [On].
3. Press a or b to select the [Push Button] option. Press [Push Button].
4. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
5. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device. Then press [OK].] appears on
the machine's LCD. Press [OK] on your Brother machine.
This will start the Wi-Fi Direct setup. To cancel, press .
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother
iPrint&Scan.
Related Information
•Configure Your Wi-Fi Direct Network
124
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN
Method
Configure Your Wi-Fi Direct Network Using the PIN Method
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [PIN Code] option, and then press OK.
4. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD.
Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
6. Do one of the following:
• When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your
mobile device. When [Input PIN Code] appears, enter the PIN displayed on your mobile device in
your Brother machine. Press OK to complete the setup.
If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
• When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Press a or b to select the mobile device you want to connect to and press OK.
Search for available devices again by pressing [Rescan], and then go to the next step.
7. Do one of the following:
• Press a to display the PIN on your Brother machine, enter the PIN in your mobile device, and then go to
the next step.
• Press b to enter the PIN displayed by your mobile device in your Brother machine. Press OK, and then go
to the next step.
If your mobile device does not display a PIN, press Cancel on your Brother machine. Go back to the first
step and try again.
8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For information on printing from your mobile device, go to your model's
Manuals page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for
Brother iPrint&Scan.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [PIN Code].
2. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
3. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then press [OK].] appears on the machine's
LCD. Press [OK] on your Brother machine.
126
This will start the Wi-Fi Direct setup. To cancel, press .
4. Do one of the following:
• When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your
mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the
machine. Press [OK] to complete the setup.
If the PIN is displayed on your Brother machine, enter the PIN in your mobile device.
• When your Brother machine is not the G/O, it will display available device names with which to configure
a Wi-Fi Direct network. Select the mobile device to which you want to connect and press [OK]. Search
for available devices again by pressing [Rescan], and then go to the next step.
5. Do one of the following:
• Press [Display PIN Code] to display the PIN on your machine and enter the PIN in your mobile
device. Go to the next step.
• Press [Input PIN Code] to enter a PIN displayed by your mobile device in the machine, and then
press [OK]. Go to the next step.
If your mobile device does not display a PIN, press on your Brother machine. Go back to the first
step and try again.
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother
iPrint&Scan.
Related Information
•Configure Your Wi-Fi Direct Network
•Wi-Fi Direct Network Configuration Overview
127
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN
Method of Wi-Fi Protected Setup™ (WPS)
Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi
Protected Setup™ (WPS)
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
If your mobile device supports the PIN Method of Wi-Fi Protected Setup™ (WPS), follow these steps to configure
a Wi-Fi Direct network.
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Group Owner] option, and then press OK.
4. Press a or b to select the [On] option, and then press OK.
5. Press a or b to select the [PIN Code] option, and then press OK.
6. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
7. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the
machine's LCD. Press OK on your machine.
This will start the Wi-Fi Direct setup. To cancel, press Cancel.
8. The machine will wait for a connection request from your mobile device. When [Input PIN Code]
appears, enter the PIN displayed on your mobile device in the machine.
9. Press OK.
10. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For information on printing from your mobile device, go to your model's
Manuals page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for
Brother iPrint&Scan.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your mobile device supports the PIN Method of Wi-Fi Protected Setup™ (WPS), follow these steps to configure
a Wi-Fi Direct network.
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].
2. Press [On].
3. Press a or b to select the [PIN Code], and then press [OK].
4. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
5. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device. Then press [OK].] appears on
the machine's LCD.
6. Press [OK] on your Brother machine.
This will start the Wi-Fi Direct setup. To cancel, press .
7. The machine will wait for a connection request from your mobile device. When [PIN Code] appears, enter
the PIN displayed on your mobile device in to the machine. Press [OK].
8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
128
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use
Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Manually
Configure Your Wi-Fi Direct Network Manually
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Wi-Fi Direct] option, and then press OK.
3. Press a or b to select the [Manual] option, and then press OK.
4. When [Wi-Fi Direct On?] appears, press a to accept. To cancel, press b.
5. The machine will display the SSID name and Password for two minutes. Go to your mobile device's wireless
network settings screen, select the SSID name, and then enter the password.
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For information on printing from your mobile device, go to your model's
Manuals page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for
Brother iPrint&Scan or the AirPrint Guide.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network manually.
1. Press [Settings] > [Network] > [Wi-Fi Direct] > [Manual].
2. When [Wi-Fi Direct on?] appears, press [On] to accept. To cancel, press [Off].
3. The machine will display the SSID name and Password for two minutes. Go to your mobile device's wireless
network settings screen, select the SSID name, and then enter the password.
4. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For details on printing from your mobile device, go to your model's Manuals
page on the Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother
iPrint&Scan or the AirPrint Guide.
Related Information
•Configure Your Wi-Fi Direct Network
•Wi-Fi Direct Network Configuration Overview
130
Home > Network > Advanced Network Features > Print the Network Configuration Report
Print the Network Configuration Report
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The Network Configuration Report lists the network configuration, including the network print server settings.
• Node Name: The Node Name appears on the current Network Configuration Report. The default Node
Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where
"xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
• If the [IP Address] on the Network Configuration Report shows 0.0.0.0, wait for one minute and try
printing it again.
• You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC
Address on the report, for example:
- IP address: 192.168.0.5
- Subnet mask: 255.255.255.0
- Node name: BRN000ca0000499
- MAC Address: 00-0c-a0-00-04-99
>> HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Machine Info.] option, and then press OK.
2. Press a or b to select [Print NetSetting].
3. Press OK.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Machine Information] > [Print NetSetting].
2. Press [OK].
3. Press .
Related Information
•Advanced Network Features
•Where Can I Find My Brother Machine's Network Settings?
•Use the Network Connection Repair Tool (Windows®)
•I Want to Check that My Network Devices are Working Correctly
•Access Web Based Management
•Configure the Gigabit Ethernet Settings Using Web Based Management
132
Home > Network > Advanced Network Features > Print the WLAN Report
Print the WLAN Report
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code
on the printed report.
>> HL-L5200DW/HL-L5200DWT
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5200DW/HL-L5200DWT
1. Press a or b to select the [Machine Info.] option, and then press OK.
2. Press a or b to select the [Print WLANReport] option, and then press OK.
The machine will print the WLAN Report.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Machine Information] > [Print WLANReport].
2. Press [OK].
The machine will print the WLAN Report.
3. Press .
If the WLAN Report does not print, check your machine for errors. If there are no visible errors, wait for one
minute and then try to print the report again.
Related Information
•Advanced Network Features
•Wireless LAN Report Error Codes
•My Brother Machine Cannot Print over the Network
•I Want to Check that My Network Devices are Working Correctly
133
Home > Network > Advanced Network Features > Print the WLAN Report > Wireless LAN Report Error
Codes
Wireless LAN Report Error Codes
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and see
the corresponding instructions in the table:
Error Code Problem and Recommended Solutions
TS-01 The wireless setting is not activated, change the wireless setting to ON.
If a network cable is connected to your machine, disconnect it and change the wireless setting of
your machine to ON.
TS-02 The wireless access point/router cannot be detected.
1. Check the following two points:
• Unplug the power to your wireless access point/router, wait for 10 seconds, and then plug
it back in.
• If your WLAN access point/router is using MAC address filtering, confirm that the MAC
address of the Brother machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/authentication method/
encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and re-enter the correct information as
necessary.
How to confirm wireless security information (SSID/authentication method/encryption
method/Network Key)
a. The Default security settings may be provided on a label attached to the WLAN access
point/router. Or the manufacturer's name or model no. of the WLAN access point/router
may be used as the default security settings.
b. See the documentation provided with your WLAN access point/router for information on
how to find the security settings.
• If WLAN access point/router is set to not broadcast the SSID, the SSID will not
automatically be detected. You will have to manually enter the SSID name.
• The Network key may also be described as the Password, Security Key or Encryption
Key.
This device does not support a 5GHz SSID/ESSID and you must select a 2.4 GHz SSID/
ESSID. Make sure the access point/router is set to 2.4 GHz or 2.4 GHz/5 GHz mixed mode.
If you do not know the SSID and wireless security settings of your WLAN access point/router
or how to change the configuration, see the documentation provided with your WLAN access
point/router, ask the manufacturer of your access point/router or ask to your Internet provider
or network administrator.
TS-03 The wireless network and security setting you entered may be incorrect. Reconfirm the wireless
network settings.
If you do not know this information, ask your network administrator.
134
Error Code Problem and Recommended Solutions
TS-04 The Authentication/Encryption methods used by the selected wireless access point/router are
not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless
access point/router. Your machine supports the following authentication methods:
• WPA-Personal
TKIP or AES
• WPA2-Personal
AES
• Open
WEP or None (without encryption)
• Shared key
WEP
If your problem is not solved, the SSID or network settings you entered may be incorrect.
Confirm the wireless network settings.
For Ad-Hoc Mode, change the authentication and encryption methods of your computer for the
wireless setting. Your machine supports Open authentication only, with optional WEP
encryption.
TS-05 The security information (SSID/Network Key) is incorrect.
Confirm the SSID and Network Key. If your router uses WEP encryption, enter the key used as
the first WEP key. Your Brother machine supports the use of the first WEP key only.
TS-06 The wireless security information (Authentication method/Encryption method/Network Key) is
incorrect.
Confirm the wireless security information (Authentication method/Encryption method/Network
Key) listed in TS-04. If your router uses WEP encryption, enter the key used as the first WEP
key. Your Brother machine supports the use of the first WEP key only.
TS-07 The machine cannot detect a WLAN access point/router that has WPS enabled.
If you would like to connect with WPS, you must operate both your machine and the WLAN
access point/router. Confirm the connection method for WPS on WLAN access point/router and
try starting again.
If you do not know how to operate your WLAN access point/router using WPS, see the
documentation provided with your WLAN access point/router, ask the manufacturer of your
WLAN access point/router or ask your network administrator.
TS-08 Two or more WLAN access points that have WPS enabled are detected.
• Confirm that only one WLAN access point/router within range has the WPS method active
and try again.
• Try starting again after few minutes in order to avoid effects from other access points.
Related Information
•Print the WLAN Report
•My Brother Machine Cannot Print over the Network
•I Want to Check that My Network Devices are Working Correctly
•Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™
(WPS)
•Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
•Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
•Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
•Configure Your Machine for an Enterprise Wireless Network
135
Home > Network > Advanced Network Features > Configure the SNTP Protocol Using Web Based
Management
Configure the SNTP Protocol Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by
the SNTP time server.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Protocol in the left navigation bar.
6. Select the SNTP check box to activate the settings.
7. Next to the SNTP check box, click Advanced Settings and follow the instructions below:
Option Description
Status Displays whether the SNTP protocol is enabled or disabled.
Synchronization Status Confirm the latest synchronization status.
SNTP Server Method Select AUTO or STATIC.
•AUTO
If you have a DHCP server in your network, the SNTP server will obtain
the address from that server automatically.
•STATIC
136
Option Description
Type the address you want to use.
Primary SNTP Server
Address
Secondary SNTP Server
Address
Type the server address (up to 64 characters).
The secondary SNTP server address is used as a backup to the primary
SNTP server address. If the primary server is unavailable, the machine will
contact the secondary SNTP server.
Primary SNTP Server Port
Secondary SNTP Server
Port
Type the port number (1-65535).
The secondary SNTP server port is used as a backup to the primary SNTP
server port. If the primary port is unavailable, the machine will contact the
secondary SNTP port.
Synchronization Interval Type the number of hours between server synchronization attempts (1-168
hours).
8. Click Submit.
Related Information
•Advanced Network Features
137
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only)
Gigabit Ethernet (Wired Network Only)
Related Models: HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your machine supports 1000BASE-T Gigabit Ethernet. To connect to a 1000BASE-T Gigabit Ethernet Network,
you must set the machine’s Ethernet link mode to Auto from the machine’s control panel or Auto from Web
Based Management (web browser).
• Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T, 100BASE-TX Fast
Ethernet Network, or 1000BASE-T Gigabit Ethernet Network. When you connect the machine to a
Gigabit Ethernet Network, use the network devices complying with 1000BASE-T.
Related Information
•Technical Information for Advanced Users
•Configure the Gigabit Ethernet Settings Using Web Based Management
139
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network
Only) > Configure the Gigabit Ethernet Settings Using Web Based Management
Configure the Gigabit Ethernet Settings Using Web Based Management
Related Models: HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Wired.
6. Click Ethernet in the left navigation bar.
7. Select Auto from the Ethernet Mode drop-down list.
8. Click Submit.
9. To enable the settings, restart your machine.
You can confirm your settings by printing the Network Configuration Report.
Related Information
•Gigabit Ethernet (Wired Network Only)
•Print the Network Configuration Report
140
Home > Network > Technical Information for Advanced Users > Reset the Network Settings to the Factory
Settings
Reset the Network Settings to the Factory Settings
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
• This feature restores all wired (supported models only) and wireless network settings to the factory
settings.
• You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3,
or Web Based Management.
>> HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Network] option, and then press OK.
2. Press a or b to select the [Network Reset] option, and then press OK.
3. Press a for [Yes].
The machine will restart.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Network] > [Network Reset] > [Yes].
2. Press [Yes] for two seconds to confirm.
The machine will restart.
Related Information
•Technical Information for Advanced Users
141
Home > Security > Lock the Machine Settings
Lock the Machine Settings
Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password,
you must reset all passwords stored in the machine by contacting your administrator or Brother customer service.
•About Using Setting Lock
143
Home > Security > Lock the Machine Settings > About Using Setting Lock
About Using Setting Lock
Use the Setting Lock feature to block unauthorised access to machine settings.
When Setting Lock is set to [On], you cannot access the machine settings without entering the password.
•Set the Setting Lock Password
•Change the Setting Lock Password
•Turn Setting Lock On
144
Home > Security > Lock the Machine Settings > About Using Setting Lock > Set the Setting Lock Password
Set the Setting Lock Password
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Setting Lock] option, and then press OK.
3. Enter a four-digit number for the password.
To enter each digit, press a or b to select a number, and then press OK.
4. When the LCD displays [Verify], re-enter the new password.
5. Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Setting Lock].
2. Enter a four-digit number for the password.
3. Press [OK].
4. When the LCD displays [Verify], re-enter the new password.
5. Press [OK].
6. Press .
Related Information
•About Using Setting Lock
145
Home > Security > Lock the Machine Settings > About Using Setting Lock > Change the Setting Lock
Password
Change the Setting Lock Password
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Setting Lock] option, and then press OK.
3. Press a or b to select the [Set Password] option, and then press OK.
4. Enter the current four-digit password.
To enter each digit, press a or b to select a number, and then press OK.
5. Enter a new four-digit password.
To enter each digit, press a or b to select a number, and then press OK.
6. When the LCD displays [Verify], re-enter the new password.
7. Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Setting Lock] > [Set Password].
2. Enter the current four-digit password.
3. Press [OK].
4. Enter a new four-digit password.
5. Press [OK].
6. When the LCD displays [Verify], re-enter the new password.
7. Press [OK].
8. Press .
Related Information
•About Using Setting Lock
146
Home > Security > Lock the Machine Settings > About Using Setting Lock > Turn Setting Lock On
Turn Setting Lock On
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Setting Lock] option, and then press OK.
3. Press OK when the LCD displays [On].
4. Enter the current four-digit password.
To enter each digit, press a or b to select a number, and then press OK.
To turn Setting Lock [Off], press OK. Press a to select [Yes] when the LCD displays [Unlock?], enter
the current four-digit password, and then press OK.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Setting Lock] > [Lock Off⇒On].
2. Enter the current four-digit password.
3. Press [OK].
To turn Setting Lock [Off], press on the LCD, enter the current four-digit password, and then press
[OK].
Related Information
•About Using Setting Lock
147
Home > Security > Network Security Features
Network Security Features
•Before Using Network Security Features
•Secure Function Lock 3.0
•Use Active Directory® Authentication
•Use LDAP Authentication
•Manage Your Network Machine Securely Using SSL/TLS
•Manage Your Network Machine Securely Using IPsec
•Send an Email Securely
•Use IEEE 802.1x Authentication for a Wired or a Wireless Network
•Store Print Log to Network
148
Home > Security > Network Security Features > Before Using Network Security Features
Before Using Network Security Features
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your Brother machine employs some of the latest network security and encryption protocols available today.
These network features can be integrated into your overall network security plan to help protect your data and
prevent unauthorised access to the machine.
We recommend disabling the Telnet, FTP server and TFTP protocols. Accessing the machine using these
protocols is not secure.
Related Information
•Network Security Features
149
Home > Security > Network Security Features > Secure Function Lock 3.0
Secure Function Lock 3.0
Brother's Secure Function Lock 3.0 increases security by restricting the functions available on your Brother
machine.
•Before Using Secure Function Lock 3.0
•Configure Secure Function Lock 3.0 Using Web Based Management
•Configure Public Mode for Secure Function Lock 3.0
•Additional Secure Function Lock 3.0 Features
•Register a new ID Card Using Machine's Control Panel
150
Home > Security > Network Security Features > Secure Function Lock 3.0 > Before Using Secure Function
Lock 3.0
Before Using Secure Function Lock 3.0
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some or all
of the functions listed here.
You can configure and change the following Secure Function Lock 3.0 settings using Web Based Management
or BRAdmin Professional 3 (Windows®):
•Print
Print includes print jobs sent via AirPrint, Google Cloud Print™ and Brother iPrint&Scan.
If you register users' login names in advance, the users will not need to enter their passwords when they use
the print function.
•Page Limits
•Web Connect (supported models only)
•Apps (supported models only)
•Page Counters
•Card ID (NFC ID) (supported models only)
If you register users' Card IDs in advance, a registered user can activate the machine by touching his
registered card to the machine's NFC logo.
Related Information
•Secure Function Lock 3.0
151
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Secure Function
Lock 3.0 Using Web Based Management
Configure Secure Function Lock 3.0 Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the User Restriction Function menu in the left navigation bar.
5. Select Secure Function Lock.
6. Click Submit.
7. Click the Restricted Functions menu in the left navigation bar.
8. In the User List / Restricted Functions field, type a group name or user name (alphanumeric, up to 15
digits).
9. In the Print and the other columns, select a check box to allow or clear a check box to restrict the function
listed.
10. To configure the maximum page count, select the On check box in the Page Limits column, and then type
the maximum number in the Max. Pages field.
11. Click Submit.
12. Click the User List menu in the left navigation bar.
13. In the User List field, type the user name.
14. In the PIN Number field, type a four-digit password.
15. To register the user's Card ID, type the card number in the Card ID (NFC ID) field (Available only for certain
models).
16. Click the Output drop-down list, and then select the output tray for each user (Available only for certain
models).
17. Select User List / Restricted Functions from the drop-down list for each user.
18. Click Submit.
Related Information
•Secure Function Lock 3.0
•Assign a Mailbox Bin to a User or Group
152
Home > Security > Network Security Features > Secure Function Lock 3.0 > Configure Public Mode for
Secure Function Lock 3.0
Configure Public Mode for Secure Function Lock 3.0
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use the Secure Function Lock screen to set up Public Mode, which limits the functions available to public users.
Public users will not need to enter a password to access the features made available through Public Mode
settings.
Public Mode includes print jobs sent via AirPrint, Google Cloud Print™ and Brother iPrint&Scan.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the User Restriction Function menu in the left navigation bar.
5. Select Secure Function Lock.
6. Click Submit.
7. Click the Restricted Functions menu.
8. In the Public Mode row, select a check box to allow or clear a check box to restrict the function listed.
9. Click Submit.
Related Information
•Secure Function Lock 3.0
153
Home > Security > Network Security Features > Secure Function Lock 3.0 > Additional Secure Function
Lock 3.0 Features
Additional Secure Function Lock 3.0 Features
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Configure the following features in the Secure Function Lock screen:
All Counter Reset
Click All Counter Reset, in the Page Counters column, to reset the page counter.
Export to CSV file
Click Export to CSV file, to export the current page counter including User List / Restricted Functions
information as a CSV file.
Card ID (NFC ID) (supported models only)
Click the User List menu, and then type a users' Card ID in the Card ID (NFC ID) field. You can use your ID
card for authentication.
Output (available models only)
When the Mailbox unit is installed on your machine, select the output tray for each user from the drop-down
list.
Last Counter Record
Click Last Counter Record if you want the machine to retain the page count after the counter has been reset.
Related Information
•Secure Function Lock 3.0
154
Home > Security > Network Security Features > Secure Function Lock 3.0 > Register a new ID Card Using
Machine's Control Panel
Register a new ID Card Using Machine's Control Panel
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Touch the NFC logo on the machine's control panel with a registered ID Card.
2. Press [Register Card].
3. Touch a new ID Card to the NFC logo.
The new ID Card's number is registered to the machine.
For the supported ID Card types, go to the Brother Solutions Center at support.brother.com to see FAQs &
Troubleshooting.
Related Information
•Secure Function Lock 3.0
155
Home > Security > Network Security Features > Use Active Directory® Authentication
Use Active Directory® Authentication
•Introduction to Active Directory® Authentication
•Configure Active Directory® Authentication Using Web Based Management
•Log On to Change the Machine Settings Using the Machine's Control Panel (Active
Directory® Authentication)
156
Home > Security > Network Security Features > Use Active Directory® Authentication > Introduction to
Active Directory® Authentication
Introduction to Active Directory® Authentication
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Active Directory® Authentication restricts the use of your Brother machine. If Active Directory® Authentication is
enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a
User ID and password.
Active Directory® Authentication offers the following feature:
• Stores incoming print data
You can change the Active Directory® Authentication settings using Web Based Management or BRAdmin
Professional 3 (Windows®).
Related Information
•Use Active Directory® Authentication
157
Home > Security > Network Security Features > Use Active Directory® Authentication > Configure Active
Directory® Authentication Using Web Based Management
Configure Active Directory® Authentication Using Web Based
Management
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Active Directory® authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the User Restriction Function menu in the left navigation bar.
5. Select Active Directory Authentication.
6. Click Submit.
7. Select Active Directory Authentication in the left navigation bar.
8. Configure the following settings:
Option Description
Storage PC Print Data Select this option to store incoming print data. After you log on to the
machine, your PC print jobs will be printed automatically. This feature is
available only for print data created by a Brother native printer driver.
Remember User ID Select this option to save your User ID.
Active Directory Server
Address
Type the IP address or the server name (for example: ad.example.com) of
the Active Directory® Server.
Active Directory Domain
Name
Type the Active Directory® domain name.
Protocol & Authentication
Method
Select the protocol and authentication method.
LDAP Server Port Type the LDAP server port number (available only for LDAP + kerberos
authentication method).
9. Click Submit.
Related Information
•Use Active Directory® Authentication
158
Home > Security > Network Security Features > Use Active Directory® Authentication > Log On to Change
the Machine Settings Using the Machine's Control Panel (Active Directory® Authentication)
Log On to Change the Machine Settings Using the Machine's Control
Panel (Active Directory® Authentication)
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
When Active Directory® Authentication is enabled, the machine's control panel will be locked until you enter your
User ID and password on the machine's control panel.
1. On the machine's control panel, enter your User ID.
2. Press [Login].
3. Enter your password.
4. Press [OK].
5. When authentication is successful, the machine's control panel will be unlocked.
Related Information
•Use Active Directory® Authentication
159
Home > Security > Network Security Features > Use LDAP Authentication > Introduction to LDAP
Authentication
Introduction to LDAP Authentication
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
LDAP Authentication restricts the use of your Brother machine. If LDAP Authentication is enabled, the machine's
control panel will be locked. You cannot change the machine's settings until you enter a User ID and password.
LDAP Authentication offers the following feature:
• Stores incoming print data
You can change the LDAP Authentication settings using Web Based Management or BRAdmin Professional 3
(Windows®).
Related Information
•Use LDAP Authentication
161
Home > Security > Network Security Features > Use LDAP Authentication > Configure LDAP
Authentication Using Web Based Management
Configure LDAP Authentication Using Web Based Management
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the User Restriction Function menu in the left navigation bar.
5. Select LDAP Authentication.
6. Click Submit.
7. Click LDAP Authentication in the left navigation bar.
8. Configure the following settings:
Option Description
Storage PC Print Data Select this option to store incoming print data. After you log on to the machine,
your PC print jobs will be printed automatically. This feature is available only for
print data created by a Brother native printer driver.
Remember User ID Select this option to save your User ID.
LDAP Server Address Type the IP address or the server name (for example: ad.example.com) of the
LDAP server.
LDAP Server Port Type the LDAP server port number.
9. Click Submit.
Related Information
•Use LDAP Authentication
162
Home > Security > Network Security Features > Use LDAP Authentication > Log On to Change the
Machine Settings Using the Machine's Control Panel (LDAP Authentication)
Log On to Change the Machine Settings Using the Machine's Control
Panel (LDAP Authentication)
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
When LDAP Authentication is enabled, the machine's control panel will be locked until you enter your User ID
and password on the machine's control panel.
1. On the machine's control panel, enter your User ID and Password.
2. Press [Login].
3. When authentication is successful, the machine's control panel will be unlocked.
Related Information
•Use LDAP Authentication
163
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS
Manage Your Network Machine Securely Using SSL/TLS
•Introduction to SSL/TLS
•Certificates and Web Based Management
•Manage Your Network Machine Securely Using Web Based Management
•Manage Your Network Machine Securely Using BRAdmin Professional 3 (Windows®)
•Print Documents Securely Using SSL/TLS
164
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Introduction to SSL/TLS
Introduction to SSL/TLS
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over
a local or wide area network (LAN or WAN). It works by encrypting data, such as a print job, sent over a network,
so anyone trying to capture it will not be able to read it.
SSL/TLS can be configured on both wired and wireless networks and will work with other forms of security such
as WPA keys and firewalls.
Related Information
•Manage Your Network Machine Securely Using SSL/TLS
•Brief History of SSL/TLS
•Benefits of Using SSL/TLS
165
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Introduction to SSL/TLS > Brief History of SSL/TLS
Brief History of SSL/TLS
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers
and servers. For example, when you use Internet Explorer® for Internet Banking and you see https:// and the little
padlock icon in the web browser, you are using SSL. SSL grew to work with additional applications, such as
Telnet, printer, and FTP software, in order to become a universal solution for online security. Its original design
intentions are still being used today by many online retailers and banks to secure sensitive data, such as credit
card numbers, customer records, etc.
SSL/TLS uses extremely high levels of encryption and is trusted by banks all over the world.
Related Information
•Introduction to SSL/TLS
166
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Introduction to SSL/TLS > Benefits of Using SSL/TLS
Benefits of Using SSL/TLS
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The primary benefit of using SSL/TLS on Brother machines is to guarantee secure printing over an IP network by
restricting unauthorised users from reading data sent to the machine. SSL's key selling point is that it can be
used to print confidential data securely. For example, an HR department in a large company may be printing
wage slips on a regular basis. Without encryption, the data contained on these wages slips can be read by other
network users. However, with SSL/TLS, anyone trying to capture the data will see a confusing page of code and
not the actual wage slip.
Related Information
•Introduction to SSL/TLS
167
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management
Certificates and Web Based Management
You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must
use Web Based Management to configure a certificate.
•Supported Security Certificate Features
•Create and Install a Certificate
•Manage Multiple Certificates
168
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Supported Security Certificate Features
Supported Security Certificate Features
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your Brother machine supports the use of multiple security certificates, which allows secure management,
authentication, and communication with the machine. The following security certificate features can be used with
the machine:
• SSL/TLS communication
• SSL communication for SMTP
• IEEE 802.1x authentication
• IPsec
The Brother machine supports the following:
• Pre-installed certificate
Your machine has a pre-installed self-signed certificate. This certificate enables you to use SSL/TLS
communication without creating or installing a different certificate.
The pre-installed self-signed certificate cannot protect your communication from being compromised. We
recommend using a certificate that is issued by a trusted organization for better security.
• Self-signed certificate
This print server issues its own certificate. Using this certificate, you can easily use the SSL/TLS
communication without creating or installing a different certificate from a CA.
• Certificate from a Certificate Authority (CA)
There are two methods for installing a certificate from a CA. If you already have a certificate from a CA or if
you want to use a certificate from an external trusted CA:
- When using a Certificates Signing Request (CSR) from this print server.
- When importing a certificate and a private key.
• Certificate Authority (CA) Certificate
To use a CA certificate that identifies the CA and owns its private key, you must import that CA certificate
from the CA before configuring the security features of the Network.
• If you are going to use SSL/TLS communication, we recommend contacting your system administrator
first.
• When you reset the print server back to its default factory settings, the certificate and the private key
that are installed will be deleted. If you want to keep the same certificate and the private key after
resetting the print server, export them before resetting, and then reinstall them.
Related Information
•Certificates and Web Based Management
169
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate
Create and Install a Certificate
•Step by Step Guide for Creating and Installing a Certificate
•Create and Install a Self-signed Certificate
•Create and Install a Certificate from a Certificate Authority (CA)
•Import and Export a CA Certificate
170
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Step by Step Guide for
Creating and Installing a Certificate
Step by Step Guide for Creating and Installing a Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
There are two options when choosing a security certificate: use a self-signed certificate or use a certificate from a
Certificate Authority (CA).
These are a brief summary of the actions required, based on the option you choose.
Option 1
Self-Signed Certificate
1. Create a self-signed certificate using Web Based Management.
2. Install the self-signed certificate on your computer.
Option 2
Certificate from a CA
1. Create a Certificate Signing Request (CSR) using Web Based Management.
2. Install the certificate issued by the CA on your Brother machine using Web Based Management.
3. Install the certificate on your computer.
Related Information
•Create and Install a Certificate
171
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate
Create and Install a Self-signed Certificate
•Create a Self-signed Certificate
•Install the Self-signed Certificate for Windows® users with Administrator Rights
•Import and Export the Self-signed Certificate on your Brother Machine
172
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate > Create a Self-signed Certificate
Create a Self-signed Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Create Self-Signed Certificate.
8. Enter a Common Name and a Valid Date.
• The length of the Common Name is less than 64 bytes. Enter an identifier, such as an IP address, node
name, or domain name to use when accessing this machine through SSL/TLS communication. The node
name is displayed by default.
• A warning will appear if you use the IPPS or HTTPS protocol and enter a different name in the URL than
the Common Name that was used for the self-signed certificate.
9. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit).
10. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256.
11. Click Submit.
12. Click Network.
13. Click Protocol.
14. Click HTTP Server Settings.
15. Select the certificate you want to configure from the Select the Certificate drop-down list.
16. Click Submit.
The following screen appears.
173
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate > Install the Self-signed Certificate for Windows® users with Administrator Rights
Install the Self-signed Certificate for Windows® users with
Administrator Rights
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The following steps are for Microsoft® Internet Explorer®. If you use another web browser, consult the
documentation for your web browser to get help with installing certificates.
1. Do one of the following:
• (Windows® XP and Windows Server® 2003)
Start your web browser, and then go to step 3.
• (Windows Vista®, Windows® 7, Windows Server® 2008)
Click (Start) > All Programs.
• (Windows® 8)
Right-click the (Internet Explorer) icon on the taskbar.
• (Windows Server® 2012 and Windows Server® 2012 R2)
Click (Internet Explorer), and then right-click the (Internet Explorer) icon that appears on the
taskbar.
2. Right-click Internet Explorer, and then click Run as administrator.
If the User Account Control screen appears,
• (Windows Vista®) Click Continue (Allow).
• (Windows® 7/Windows® 8) Click Yes.
3. Type "https://machine's IP address/" in your browser's address bar to access your machine (where
"machine's IP address" is the machine's IP address or the node name that you assigned for the certificate).
175
4. Click Continue to this website (not recommended).
(Windows® XP and Windows Server® 2003)
When the following dialog box appears, click View Certificate, and then go to step 6.
5. Click Certificate Error, and then click View certificates.
176
6. Click Install Certificate....
7. When the Certificate Import Wizard appears, click Next.
8. Select Place all certificates in the following store, and then click Browse....
177
9. Select Trusted Root Certification Authorities, and then click OK.
10. Click Next.
11. Click Finish.
12. Click Yes, if the fingerprint (thumbprint) is correct.
The fingerprint (thumbprint) is printed on the Network Configuration Report.
13. Click OK.
The self-signed certificate is now installed on your computer, and SSL/TLS communication is available.
Related Information
•Create and Install a Self-signed Certificate
178
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine
Import and Export the Self-signed Certificate on your Brother Machine
You can store the self-signed certificates on your Brother machine and manage them by importing and exporting.
•Import the Self-signed Certificate
•Export the Self-signed Certificate
179
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Import the Self-
signed Certificate
Import the Self-signed Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Import Certificate and Private Key.
8. Browse to the file you want to import.
9. Type the password if the file is encrypted, and then click Submit.
The self-signed certificate is imported to your machine.
To use SSL/TLS communication, the self-signed certificate must also be installed on your computer. Contact your
network administrator.
Related Information
•Import and Export the Self-signed Certificate on your Brother Machine
180
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Self-
signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Export the Self-
signed Certificate
Export the Self-signed Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Export.
8. If you want to encrypt the file, type a password in the Enter Password field.
If the Enter Password field is blank, your output file will not be encrypted.
9. Type the password again in the Retype Password field, and then click Submit.
10. Specify the location where you want to save the file.
The self-signed certificate is exported to your computer.
You can also import the self-signed certificate to your computer.
Related Information
•Import and Export the Self-signed Certificate on your Brother Machine
181
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA)
Create and Install a Certificate from a Certificate Authority (CA)
If you already have a certificate from an external trusted CA, you can store the certificate and private key on the
machine and manage them by importing and exporting. If you do not have a certificate from an external trusted
CA, create a Certificate Signing Request (CSR), send it to a CA for authentication, and install the returned
certificate on your machine.
•Create a Certificate Signing Request (CSR)
•Install a Certificate on Your Brother Machine
•Import and Export the Certificate and Private Key
182
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA) > Create a Certificate Signing Request (CSR)
Create a Certificate Signing Request (CSR)
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the
credentials contained within the certificate.
We recommend installing a Root Certificate from the CA on your computer before creating the CSR.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Create CSR.
8. Type a Common Name (required) and add other information about your Organization (optional).
• Your company details are required so that a CA can confirm your identity and verify it to the outside
world.
• The length of the Common Name must be less than 64 bytes. Enter an identifier, such as an IP
address, node name, or domain name to use when accessing this printer through SSL/TLS
communication. The node name is displayed by default. The Common Name is required.
• A warning will appear if you type a different name in the URL than the Common Name that was used for
the certificate.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province must
be less than 64 bytes.
• The Country/Region should be a two character ISO 3166 country code.
• If you are configuring an X.509v3 certificate extension, select the Configure extended partition check
box, and then select Auto (Register IPv4) or Manual.
9. Select your setting from the Public Key Algorithm drop-down list. The default setting is RSA(2048bit).
10. Select your setting from the Digest Algorithm drop-down list. The default setting is SHA256.
11. Click Submit.
183
The CSR appears on your screen. Save the CSR as a file or copy and paste it into an online CSR form
offered by a Certificate Authority.
12. Click Save.
• Follow your CA's policy regarding the method to send a CSR to your CA.
• If you are using the Enterprise root CA of Windows Server® 2003/2008/2012/2012 R2, we recommend
using the Web Server for the certificate template to securely create the Client Certificate. If you are
creating a Client Certificate for an IEEE 802.1x environment with EAP-TLS authentication, we
recommend using User for the certificate template. For more information, go to your model's page on
the Brother Solutions Center at support.brother.com.
Related Information
•Create and Install a Certificate from a Certificate Authority (CA)
184
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA) > Install a Certificate on Your Brother Machine
Install a Certificate on Your Brother Machine
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
When you receive a certificate from a CA, follow the steps below to install it into the print server:
Only a certificate issued with your machine's CSR can be installed onto the machine. When you want to create
another CSR, make sure that the certificate is installed before creating another CSR. Create another CSR only
after installing the certificate on the machine. If you do not, the CSR you create before installing will be invalid.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Install Certificate.
8. Browse to the file that contains the certificate issued by the CA, and then click Submit.
The certificate has been created successfully and saved in your machine's memory successfully.
To use SSL/TLS communication, the Root Certificate from the CA must be installed on your computer. Contact
your network administrator.
Related Information
•Create and Install a Certificate from a Certificate Authority (CA)
185
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key
Import and Export the Certificate and Private Key
Store the certificate and private key on your machine and manage them by importing and exporting them.
•Import a Certificate and Private Key
•Export the Certificate and Private Key
186
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Import a
Certificate and Private Key
Import a Certificate and Private Key
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Import Certificate and Private Key.
8. Browse to the file you want to import.
9. Type the password if the file is encrypted, and then click Submit.
The certificate and private key are imported to your machine.
To use SSL/TLS communication, the Root Certificate from the CA must also be installed on your computer.
Contact your network administrator.
Related Information
•Import and Export the Certificate and Private Key
187
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a
Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key > Export the
Certificate and Private Key
Export the Certificate and Private Key
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click Certificate.
7. Click Export shown with Certificate List.
8. Enter the password if you want to encrypt the file.
If a blank password is used, the output is not encrypted.
9. Enter the password again for confirmation, and then click Submit.
10. Specify the location where you want to save the file.
The certificate and private key are exported to your computer.
You can also import the certificate to your computer.
Related Information
•Import and Export the Certificate and Private Key
188
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA
Certificate
Import and Export a CA Certificate
You can import, export and store CA certificates on your Brother machine.
•Import a CA Certificate
•Export a CA Certificate
189
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA
Certificate > Import a CA Certificate
Import a CA Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click CA Certificate.
7. Click Import CA Certificate and select the certificate.
8. Click Submit.
Related Information
•Import and Export a CA Certificate
190
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Create and Install a Certificate > Import and Export a CA
Certificate > Export a CA Certificate
Export a CA Certificate
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click CA Certificate.
7. Select the certificate you want to export and click Export.
8. Click Submit.
9. Click Save.
10. Specify where on your computer you want to save the exported certificate, and save it.
Related Information
•Import and Export a CA Certificate
191
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Certificates and Web Based Management > Manage Multiple Certificates
Manage Multiple Certificates
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The multiple certificate feature allows you to use Web Based Management to manage each certificate installed
on your machine. In Web Based Management, navigate to the Certificate or CA Certificate screen to view
certificate content, delete, or export your certificates.
Maximum Number of Certificates Stored UP on Brother Machine
Self-signed Certificate or
Certificate Issued by a CA
5
CA Certificate 6
We recommend storing one less certificate than allowed, reserving an empty spot in case of certificate expiration.
When a certificate expires, import a new certificate into the reserved spot, and then delete the expired certificate.
This ensures that you avoid configuration failure.
• When you use HTTPS/IPPS, or IEEE 802.1x, you must select which certificate you are using.
• When you use SSL for SMTP communications, you do not have to choose the certificate. The
necessary certificate will be chosen automatically.
Related Information
•Certificates and Web Based Management
192
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Manage Your Network Machine Securely Using Web Based Management
Manage Your Network Machine Securely Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
To manage your network machine securely, you must use management utilities with security protocols.
We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be
enabled on your machine.
• The HTTPS protocol is enabled by default.
• You can change the HTTPS protocol settings using the Web Based Management screen.
1. Click the Network tab.
2. Click the Protocol menu in the left navigation bar.
3. Click HTTP Server Settings.
1. Start your web browser.
2. Type "https://Common Name" in your browser's address bar (where "Common Name" is the Common Name
that you assigned to the certificate; this could be your IP address, node name, or domain name).
3. No password is required by default. Type a password if you have set one, and then click .
4. You can now access the machine using HTTPS.
• If you use the SNMPv3 protocol, follow the steps below.
• You can also change the SNMP settings by using BRAdmin Professional 3.
5. Click the Network tab.
6. Click Protocol.
7. Make sure the SNMP setting is enabled, and then click Advanced Settings.
8. Configure the SNMP settings.
193
There are three options for SNMP Mode of Operation.
•SNMP v1/v2c read-write access
In this mode, the print server uses version 1 and version 2c of the SNMP protocol. You can use all
Brother applications in this mode. However, it is not secure since it will not authenticate the user, and data
will not be encrypted.
•SNMPv3 read-write access and v1/v2c read-only access
In this mode, the print server uses the read-write access of version 3 and the read-only access of version
1 and version 2c of the SNMP protocol.
When you use SNMPv3 read-write access and v1/v2c read-only access mode, some Brother
applications (such as BRAdmin Light) that access the print server do not work correctly since they authorize
the read-only access of version 1 and version 2c. If you want to use all applications, we recommend using
SNMP v1/v2c read-write access mode.
•SNMPv3 read-write access
In this mode, the print sever uses version 3 of the SNMP protocol. If you want to manage the print server
securely, use this mode.
When you use SNMPv3 read-write access mode, note the following:
- You can use only BRAdmin Professional 3 or Web Based Management to manage the print server.
- Except for BRAdmin Professional 3, all applications that use SNMPv1/v2c will be restricted. To allow the
use of SNMPv1/v2c applications, use SNMPv3 read-write access and v1/v2c read-only access or
SNMP v1/v2c read-write access mode.
Related Information
•Manage Your Network Machine Securely Using SSL/TLS
194
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Manage Your Network Machine Securely Using BRAdmin Professional 3 (Windows®)
Manage Your Network Machine Securely Using BRAdmin Professional 3
(Windows®)
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
To use BRAdmin Professional 3 utility, you must:
• Use the latest version of BRAdmin Professional 3. Go to your model's Downloads page on the Brother
Solutions Center at support.brother.com. If you use an older version of BRAdmin to manage your Brother
machines, the user authentication will not be secure.
• Use Web Based Management with the HTTPS protocol if you use BRAdmin Professional 3 and Web Based
Management together.
• Use a different password in each group if you are managing a mixed group of older and newer print servers
with BRAdmin Professional 3. This will ensure security is maintained on the newer print servers.
• "Older versions of BRAdmin" refer to BRAdmin Professional older than Ver. 2.80 and BRAdmin Light for
Macintosh older than Ver.1.10.
• "Older print servers" refer to NC-2000 series, NC-2100p, NC-3100h, NC-3100s, NC-4100h, NC-5100h,
NC-5200h, NC-6100h, NC-6200h, NC-6300h, NC-6400h, NC-8000, NC-100h, NC-110h, NC-120w,
NC-130h, NC-140w, NC-8100h, NC-9100h, NC-7100w, NC-7200w and NC-2200w.
Related Information
•Manage Your Network Machine Securely Using SSL/TLS
195
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/
TLS > Print Documents Securely Using SSL/TLS
Print Documents Securely Using SSL/TLS
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
To print documents securely with IPP protocol, use the IPPS protocol.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Protocol. Make sure the IPP check box is selected.
If the IPP check box is not selected, select the IPP check box, and then click Submit.
Restart your machine to activate the configuration.
After the machine restarts, return to the machine's web page, click the Network tab, and then click
Protocol.
6. Click HTTP Server Settings.
7. Select the HTTPS(Port443) check box, and then click Submit.
8. Restart your machine to activate the configuration.
Communication using IPPS cannot prevent unauthorised access to the print server.
Related Information
•Manage Your Network Machine Securely Using SSL/TLS
196
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec
Manage Your Network Machine Securely Using IPsec
•Introduction to IPsec
•Configure IPsec Using Web Based Management
•Configure an IPsec Address Template Using Web Based Management
•Configure an IPsec Template Using Web Based Management
197
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Introduction to IPsec
Introduction to IPsec
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
IPsec (Internet Protocol Security) is a security protocol that uses an optional Internet Protocol function to prevent
manipulation and ensure the confidentiality of data transmitted as IP packets. IPsec encrypts data carried over
the network, such as print data sent from computers to a printer. Because the data is encrypted at the network
layer, applications that employ a higher-level protocol use IPsec even if the user is not aware of its use.
IPsec supports the following functions:
• IPsec transmissions
According to the IPsec setting conditions, the network-connected computer sends data to and receives data
from the specified device using IPsec. When the devices start communicating using IPsec, keys are
exchanged using Internet Key Exchange (IKE) first, and then the encrypted data is transmitted using the
keys.
In addition, IPsec has two operation modes: the Transport mode and Tunnel mode. The Transport mode is
used mainly for communication between devices and the Tunnel mode is used in environments such as a
Virtual Private Network (VPN).
For IPsec transmissions, the following conditions are necessary:
- A computer that can communicate using IPsec is connected to the network.
- Your Brother machine is configured for IPsec communication.
- The computer connected to your Brother machine is configured for IPsec connections.
• IPsec settings
The settings that are necessary for connections using IPsec. These settings can be configured using Web
Based Management.
To configure the IPsec settings, you must use the browser on a computer that is connected to the network.
Related Information
•Manage Your Network Machine Securely Using IPsec
198
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure IPsec Using Web Based Management
Configure IPsec Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The IPsec connection conditions are comprised of two Template types: Address and IPsec. You can configure
up to 10 connection conditions.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click the IPsec menu in the left navigation bar.
7. In the Status field, enable or disable IPsec.
199
8. Select Negotiation Mode for IKE Phase 1.
IKE is a protocol that is used to exchange encryption keys in order to carry out encrypted communication
using IPsec.
In Main mode, the processing speed is slow, but the security is high. In Aggressive mode, the processing
speed is faster than Main mode, but the security is lower.
9. In the All Non-IPsec Traffic field, select the action to be taken for non-IPsec packets.
When using Web Services, you must select Allow for All Non-IPsec Traffic. If you select Drop, Web
Services cannot be used.
10. In the Broadcast/Multicast Bypass field, select Enabled or Disabled.
11. In the Protocol Bypass field, select the check box for the option or options you want.
12. In the Rules table, select the Enabled check box to activate the template.
When you select multiple check boxes, the lower numbered check boxes have priority if the settings for the
selected check boxes conflict.
13. Click on the corresponding drop-down list to select the Address Template that is used for the IPsec
connection conditions.
To add an Address Template, click Add Template.
14. Click on the corresponding drop-down list to select the IPsec Template that is used for the IPsec connection
conditions.
To add an IPsec Template, click Add Template.
15. Click Submit.
If the computer must be restarted to register the new settings, the restart confirmation screen will appear.
If there is a blank item in the template you enabled in the Rules table, an error message appears. Confirm
your choices and submit again.
Related Information
•Manage Your Network Machine Securely Using IPsec
200
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure an IPsec Address Template Using Web Based Management
Configure an IPsec Address Template Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click the IPsec Address Template menu in the left navigation bar.
The Template List appears, displaying 10 Address Templates.
Click the Delete button to delete an Address Template. When an Address Template is in use, it cannot be
deleted.
7. Click the Address Template that you want to create. The IPsec Address Template appears.
8. In the Template Name field, type a name for the template (up to 16 characters).
9. Select a Local IP Address option to specify the IP address conditions for the sender:
•IP Address
Specify the IP address. Select ALL IPv4 Address, ALL IPv6 Address, All Link Local IPv6, or Custom
from the drop-down list.
If you select Custom from the drop-down list, type the IP address (IPv4 or IPv6) in the text box.
•IP Address Range
Type the starting and ending IP addresses for the IP address range in the text boxes. If the starting and
ending IP addresses are not standardized to IPv4 or IPv6, or the ending IP address is smaller than the
starting address, an error will occur.
201
•IP Address / Prefix
Specify the IP address using CIDR notation.
For example: 192.168.1.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the
addresses 192.168.1.xxx are valid.
10. Select a Remote IP Address option to specify the IP address conditions for the recipient:
•Any
If you select Any, all IP addresses are enabled.
•IP Address
Type the specified IP address (IPv4 or IPv6) in the text box.
•IP Address Range
Type the starting and ending IP addresses for the IP address range. If the starting and ending IP
addresses are not standardized to IPv4 or IPv6, or the ending IP address is smaller than the starting
address, an error will occur.
•IP Address / Prefix
Specify the IP address using CIDR notation.
For example: 192.168.1.1/24
Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the
addresses 192.168.1.xxx are valid.
11. Click Submit.
When you change the settings for the template currently in use, the IPsec screen in Web Based
Management will close and open again.
Related Information
•Manage Your Network Machine Securely Using IPsec
202
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure an IPsec Template Using Web Based Management
Configure an IPsec Template Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Security.
6. Click IPsec Template in the left navigation bar.
The Template List appears, displaying 10 IPsec Templates.
Click the Delete button to delete an IPsec Template. When an IPsec Template is in use, it cannot be
deleted.
7. Click IPsec Template that you want to create. The IPsec Template screen appears. The configuration fields
differ based on the Use Prefixed Template and Internet Key Exchange (IKE) you select.
8. In the Template Name field, type a name for the template (up to 16 characters).
9. Select the Internet Key Exchange (IKE) options.
10. Click Submit.
203
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure an IPsec Template Using Web Based Management > IKEv1 Settings for an IPsec Template
IKEv1 Settings for an IPsec Template
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
205
Template Name
Type a name for the template (up to 16 characters).
Use Prefixed Template
Select Custom, IKEv1 High Security or IKEv1 Medium Security. The setting items are different depending
on the selected template.
The default template differs depending on whether you chose Main or Aggressive for Negotiation Mode
on the IPsec configuration screen.
Internet Key Exchange (IKE)
IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted
communication using IPsec. To carry out encrypted communication for that time only, the encryption algorithm
that is necessary for IPsec is determined and the encryption keys are shared. For IKE, the encryption keys are
exchanged using the Diffie-Hellman key exchange method, and encrypted communication that is limited to
IKE is carried out.
If you selected Custom in Use Prefixed Template, select IKEv1.
Authentication Type
Configure the IKE authentication and encryption.
•Diffie-Hellman Group
This key exchange method allows secret keys to be securely exchanged over an unprotected network.
The Diffie-Hellman key exchange method uses a discrete logarithm problem, not the secret key, to send
and receive open information that was generated using a random number and the secret key.
Select Group1, Group2, Group5, or Group14.
•Encryption
Select DES, 3DES, AES-CBC 128, or AES-CBC 256.
•Hash
Select MD5, SHA1, SHA256, SHA384 or SHA512.
•SA Lifetime
Specify the IKE SA lifetime.
Type the time (seconds) and number of kilobytes (KByte).
Encapsulating Security
•Protocol
Select ESP, AH+ESP or AH.
- ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload
(communicated contents) and adds additional information. The IP packet is comprised of the header
and the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet
also includes information regarding the encryption method and encryption key, the authentication data,
and so on.
- AH is part of the IPsec protocol that authenticates the sender and prevents manipulation (ensures the
completeness) of the data. In the IP packet, the data is inserted immediately after the header. In
addition, the packets include hash values, which are calculated using an equation from the
communicated contents, secret key, and so on, in order to prevent the falsification of the sender and
manipulation of the data. Unlike ESP, the communicated contents are not encrypted, and the data is
sent and received as plain text.
•Encryption
Select DES, 3DES, AES-CBC 128, or AES-CBC 256. The encryption can be selected only when ESP
is selected in Protocol.
•Hash
Select None, MD5, SHA1, SHA256, SHA384, or SHA512. None can be selected only when ESP is
selected in Protocol.
206
When AH+ESP is selected in Protocol, select each protocol for Hash(AH) and Hash(ESP).
•SA Lifetime
Specify the IPsec SA lifetime.
Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire.
•Encapsulation Mode
Select Transport or Tunnel.
•Remote Router IP-Address
Type the IP address (IPv4 or IPv6) of the remote router. Enter this information only when the Tunnel
mode is selected.
SA (Security Association) is an encrypted communication method using IPsec or IPv6 that exchanges and
shares information, such as the encryption method and encryption key, in order to establish a secure
communication channel before communication begins. SA may also refer to a virtual encrypted
communication channel that has been established. The SA used for IPsec establishes the encryption
method, exchanges the keys, and carries out mutual authentication according to the IKE (Internet Key
Exchange) standard procedure. In addition, the SA is updated periodically.
Perfect Forward Secrecy (PFS)
PFS does not derive keys from previous keys that were used to encrypt messages. In addition, if a key that is
used to encrypt a message was derived from a parent key, that parent key is not used to derive other keys.
Therefore, even if a key is compromised, the damage will be limited only to the messages that were encrypted
using that key.
Select Enabled or Disabled.
Authentication Method
Select the authentication method. Select Pre-Shared Key or Certificates.
Pre-Shared Key
When encrypting communication, the encryption key is exchanged and shared beforehand using another
channel.
If you selected Pre-Shared Key for the Authentication Method, type the Pre-Shared Key (up to 32
characters).
•Local/ID Type/ID
Select the sender's ID type, and then type the ID.
Select IPv4 Address, IPv6 Address, FQDN, E-mail Address, or Certificate for the type.
If you select Certificate, type the common name of the certificate in the ID field.
•Remote/ID Type/ID
Select the recipient's ID type, and then type the ID.
Select IPv4 Address, IPv6 Address, FQDN, E-mail Address, or Certificate for the type.
If you select Certificate, type the common name of the certificate in the ID field.
Certificates
If you selected Certificates for Authentication Method, select the certificate.
You can select only the certificates that were created using the Certificate page of Web Based
Management's Security configuration screen.
Related Information
•Configure an IPsec Template Using Web Based Management
207
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure an IPsec Template Using Web Based Management > IKEv2 Settings for an IPsec Template
IKEv2 Settings for an IPsec Template
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
208
Template Name
Type a name for the template (up to 16 characters).
Use Prefixed Template
Select Custom, IKEv2 High Security, or IKEv2 Medium Security. The setting items are different depending
on the selected template.
Internet Key Exchange (IKE)
IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted
communication using IPsec. To carry out encrypted communication for that time only, the encryption algorithm
that is necessary for IPsec is determined and the encryption keys are shared. For IKE, the encryption keys are
exchanged using the Diffie-Hellman key exchange method, and encrypted communication that is limited to
IKE is carried out.
If you selected Custom in Use Prefixed Template, select IKEv2.
Authentication Type
Configure the IKE authentication and encryption.
•Diffie-Hellman Group
This key exchange method allows secret keys to be securely exchanged over an unprotected network.
The Diffie-Hellman key exchange method uses a discrete logarithm problem, not the secret key, to send
and receive open information that was generated using a random number and the secret key.
Select Group1, Group2, Group5, or Group14.
•Encryption
Select DES, 3DES, AES-CBC 128, or AES-CBC 256.
•Hash
Select MD5, SHA1, SHA256, SHA384 or SHA512.
•SA Lifetime
Specify the IKE SA lifetime.
Type the time (seconds) and number of kilobytes (KByte).
Encapsulating Security
•Protocol
Select ESP.
ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload
(communicated contents) and adds additional information. The IP packet is comprised of the header and
the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet also
includes information regarding the encryption method and encryption key, the authentication data, and so
on.
•Encryption
Select DES, 3DES, AES-CBC 128, or AES-CBC 256.
•Hash
Select MD5, SHA1, SHA256, SHA384, or SHA512.
•SA Lifetime
Specify the IPsec SA lifetime.
Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire.
•Encapsulation Mode
Select Transport or Tunnel.
•Remote Router IP-Address
Type the IP address (IPv4 or IPv6) of the remote router. Enter this information only when the Tunnel
mode is selected.
209
SA (Security Association) is an encrypted communication method using IPsec or IPv6 that exchanges and
shares information, such as the encryption method and encryption key, in order to establish a secure
communication channel before communication begins. SA may also refer to a virtual encrypted
communication channel that has been established. The SA used for IPsec establishes the encryption
method, exchanges the keys, and carries out mutual authentication according to the IKE (Internet Key
Exchange) standard procedure. In addition, the SA is updated periodically.
Perfect Forward Secrecy (PFS)
PFS does not derive keys from previous keys that were used to encrypt messages. In addition, if a key that is
used to encrypt a message was derived from a parent key, that parent key is not used to derive other keys.
Therefore, even if a key is compromised, the damage will be limited only to the messages that were encrypted
using that key.
Select Enabled or Disabled.
Authentication Method
Select the authentication method. Select Pre-Shared Key, Certificates, EAP - MD5, or EAP - MS-CHAPv2.
Pre-Shared Key
When encrypting communication, the encryption key is exchanged and shared beforehand using another
channel.
If you selected Pre-Shared Key for the Authentication Method, type the Pre-Shared Key (up to 32
characters).
•Local/ID Type/ID
Select the sender's ID type, and then type the ID.
Select IPv4 Address, IPv6 Address, FQDN, E-mail Address, or Certificate for the type.
If you select Certificate, type the common name of the certificate in the ID field.
•Remote/ID Type/ID
Select the recipient's ID type, and then type the ID.
Select IPv4 Address, IPv6 Address, FQDN, E-mail Address, or Certificate for the type.
If you select Certificate, type the common name of the certificate in the ID field.
Certificates
If you selected Certificates for Authentication Method, select the certificate.
You can select only the certificates that were created using the Certificate page of Web Based
Management's Security configuration screen.
EAP
EAP is an authentication protocol that is an extension of PPP. By using EAP with IEEE802.1x, a different key
is used for user authentication during each session.
The following settings are necessary only when EAP - MD5 or EAP - MS-CHAPv2 is selected in
Authentication Method:
•Mode
Select Server-Mode or Client-Mode.
•Certificate
Select the certificate.
•User Name
Type the user name (up to 32 characters).
•Password
Type the password (up to 32 characters). The password must be entered two times for confirmation.
•Certificate
Click this button to move to the Certificate configuration screen.
210
Home > Security > Network Security Features > Manage Your Network Machine Securely Using
IPsec > Configure an IPsec Template Using Web Based Management > Manual Settings for an IPsec
Template
Manual Settings for an IPsec Template
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Template Name
Type a name for the template (up to 16 characters).
Use Prefixed Template
Select Custom.
212
Internet Key Exchange (IKE)
IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted
communication using IPsec. To carry out encrypted communication for that time only, the encryption algorithm
that is necessary for IPsec is determined and the encryption keys are shared. For IKE, the encryption keys are
exchanged using the Diffie-Hellman key exchange method, and encrypted communication that is limited to
IKE is carried out.
Select Manual.
Authentication Key (ESP,AH)
Specify the key to use for authentication. Type the In/Out values.
These settings are necessary when Custom is selected for Use Prefixed Template, Manual is selected for
IKE, and a setting other than None is selected for Hash for Encapsulating Security section.
The number of characters you can set differs depending on the setting you chose for Hash in the
Encapsulating Security section.
If the length of the specified authentication key is different than the selected hash algorithm, an error will
occur.
•MD5: 128 bits (16 bytes)
•SHA1: 160 bits (20 bytes)
•SHA256: 256 bits (32 bytes)
•SHA384: 384 bits (48 bytes)
•SHA512: 512 bits (64 bytes)
When you specify the key in ASCII Code, enclose the characters in double quotation marks (").
Code key (ESP)
Specify the key to use for encryption. Type the In/Out values.
These settings are necessary when Custom is selected in Use Prefixed Template, Manual is selected in
IKE, and ESP is selected in Protocol in Encapsulating Security.
The number of characters you can set differs depending on the setting you chose for Encryption in the
Encapsulating Security section.
If the length of the specified code key is different than the selected encryption algorithm, an error will occur.
•DES: 64 bits (8 bytes)
•3DES: 192 bits (24 bytes)
•AES-CBC 128: 128 bits (16 bytes)
•AES-CBC 256: 256 bits (32 bytes)
When you specify the key in ASCII Code, enclose the characters in double quotation marks (").
SPI
These parameters are used to identify security information. Generally, a host has multiple Security
Associations (SAs) for several types of IPsec communication. Therefore, it is necessary to identify the
applicable SA when an IPsec packet is received. The SPI parameter, which identifies the SA, is included in
the Authentication Header (AH) and Encapsulating Security Payload (ESP) header.
These settings are necessary when Custom is selected for Use Prefixed Template, and Manual is selected
for IKE.
Enter the In/Out values. (3-10 characters)
Encapsulating Security
•Protocol
Select ESP or AH.
213
- ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload
(communicated contents) and adds additional information. The IP packet is comprised of the header
and the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet
also includes information regarding the encryption method and encryption key, the authentication data,
and so on.
- AH is part of the IPsec protocol that authenticates the sender and prevents manipulation of the data
(ensures the completeness of the data). In the IP packet, the data is inserted immediately after the
header. In addition, the packets include hash values, which are calculated using an equation from the
communicated contents, secret key, and so on, in order to prevent the falsification of the sender and
manipulation of the data. Unlike ESP, the communicated contents are not encrypted, and the data is
sent and received as plain text.
•Encryption
Select DES, 3DES, AES-CBC 128, or AES-CBC 256. The encryption can be selected only when ESP
is selected in Protocol.
•Hash
Select None, MD5, SHA1, SHA256, SHA384, or SHA512. None can be selected only when ESP is
selected in Protocol.
•SA Lifetime
Specify the IKE SA lifetime.
Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire.
•Encapsulation Mode
Select Transport or Tunnel.
•Remote Router IP-Address
Specify the IP address (IPv4 or IPv6) of the connection destination. Enter this information only when the
Tunnel mode is selected.
SA (Security Association) is an encrypted communication method using IPsec or IPv6 that exchanges and
shares information, such as the encryption method and encryption key, in order to establish a secure
communication channel before communication begins. SA may also refer to a virtual encrypted
communication channel that has been established. The SA used for IPsec establishes the encryption
method, exchanges the keys, and carries out mutual authentication according to the IKE (Internet Key
Exchange) standard procedure. In addition, the SA is updated periodically.
Submit
Click this button to register the settings.
When you change the settings for the template currently in use, the IPsec screen in Web Based
Management will close and open again.
Related Information
•Configure an IPsec Template Using Web Based Management
214
Home > Security > Network Security Features > Send an Email Securely > Configure Email Sending Using
Web Based Management
Configure Email Sending Using Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
We recommend using Web Based Management to configure secured email sending with user authentication, or
email sending using SSL/TLS.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Protocol in the left navigation bar.
6. In the SMTP field, click Advanced Settings and make sure the status of SMTP is Enabled.
7. Configure the SMTP settings.
• Confirm that the email settings are correct after configuration by sending a test email.
• If you do not know the SMTP server settings, contact your network administrator or Internet Service
Provider (ISP).
8. When finished, click Submit.
The Test Send E-mail Configuration dialog box appears.
9. Follow the instructions in the dialog box to test the current settings.
Related Information
•Send an Email Securely
216
Home > Security > Network Security Features > Send an Email Securely > Send an Email with User
Authentication
Send an Email with User Authentication
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your Brother machine supports the SMTP-AUTH method to send email via an email server that requires user
authentication. This method prevents unauthorised users from accessing the email server.
You can use the SMTP-AUTH method for email notification and email reports (available for certain models).
We recommend using Web Based Management to configure the SMTP authentication.
Email Server Settings
You must configure your machine's SMTP authentication method to match the method used by your email server.
For details about your email server settings, contact your network administrator or Internet Service Provider
(ISP).
To enable SMTP server authentication, in the Web Based Management SMTP screen, under Server
Authentication Method, you must select SMTP-AUTH.
Related Information
•Send an Email Securely
217
Home > Security > Network Security Features > Send an Email Securely > Send an Email Securely Using
SSL TLS
Send an Email Securely Using SSL TLS
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your Brother machine supports SSL/TLS methods to send an email via an email server that requires secure
SSL/TLS communication. To send email via an email server that is using SSL/TLS communication, you must
configure SMTP over SSL/TLS.
We recommend using Web Based Management to configure SSL/TLS.
Verify Server Certificate
Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate check box will be selected
automatically.
• Before you verify the server certificate, you must import the CA certificate issued by the CA that signed
the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to
confirm if importing a CA certificate is necessary.
• If you do not need to verify the server certificate, clear the Verify Server Certificate check box.
218
Port Number
If you select SSL, the Port value will be changed to match the protocol. To change the port number manually,
type the port number after you choose SSL/TLS.
You must configure your machine's SMTP communication method to match the method used by your email
server. For details about your email server settings, contact your network administrator or your ISP.
In most cases, the secured webmail services require the following settings:
SMTP Port 587
Server Authentication Method SMTP-AUTH
SSL/TLS TLS
Related Information
•Send an Email Securely
219
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless
Network
Use IEEE 802.1x Authentication for a Wired or a Wireless Network
•What Is IEEE 802.1x Authentication?
•Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web
Based Management (Web Browser)
•IEEE 802.1x Authentication Methods
220
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless
Network > What Is IEEE 802.1x Authentication?
What Is IEEE 802.1x Authentication?
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorised network
devices. Your Brother machine (supplicant) sends an authentication request to a RADIUS server (Authentication
server) through your access point or HUB. After your request has been verified by the RADIUS server, your
machine can access the network.
Related Information
•Use IEEE 802.1x Authentication for a Wired or a Wireless Network
221
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless
Network > Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based
Management (Web Browser)
Configure IEEE 802.1x Authentication for a Wired or a Wireless Network
Using Web Based Management (Web Browser)
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
• If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a
CA before you start configuration. Contact your network administrator about the client certificate. If you have
installed more than one certificate, we recommend writing down the certificate name you want to use.
• Before you verify the server certificate, you must import the CA certificate that has been issued by the CA
that signed the server certificate. Contact your network administrator or your Internet Service Provider (ISP)
to confirm whether a CA certificate import is necessary.
You can also configure IEEE 802.1x authentication using:
• BRAdmin Professional 3 (Wired and wireless network)
• Wireless setup wizard from the control panel (Wireless network)
• Wireless setup wizard on the CD-ROM (Wireless network)
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Do one of the following:
Option Description
Wired network Click Wired, and then select Wired 802.1x Authentication.
Wireless network Click Wireless, and then select Wireless (Enterprise).
6. Configure the IEEE 802.1x authentication settings.
222
• To enable IEEE 802.1x authentication for wired networks, select Enabled for Wired 802.1x status on
the Wired 802.1x Authentication page.
• If you are using EAP-TLS authentication, you must select the client certificate that has been installed
(shown with certificate name) for verification from the Client Certificate drop-down list.
• If you select EAP-FAST, PEAP, EAP-TTLS, or EAP-TLS authentication, select the verification method
from the Server Certificate Verification drop-down list. Verify the server certificate using the CA
certificate, imported to the machine in advance, that has been issued by the CA that signed the server
certificate.
Select one of the following verification methods from the Server Certificate Verification drop-down list:
Option Description
No Verification The server certificate can always be trusted. The verification is not performed.
CA Cert. The verification method to check the CA reliability of the server certificate, using the
CA certificate that has been issued by the CA that signed the server certificate.
CA Cert. + ServerID The verification method to check the common name 1 value of the server certificate,
in addition to the CA reliability of the server certificate.
7. When finished with configuration, click Submit.
For wired networks: After configuring, connect your machine to the IEEE 802.1x supported network. After a
few minutes, print the Network Configuration Report to check the <Wired IEEE 802.1x> Status.
Option Description
Success The wired IEEE 802.1x function is enabled and the authentication was successful.
Failed The wired IEEE 802.1x function is enabled; however, the authentication failed.
Off The wired IEEE 802.1x function is not available.
Related Information
•Use IEEE 802.1x Authentication for a Wired or a Wireless Network
1The common name verification compares the common name of the server certificate to the character string configured for the Server ID.
Before you use this method, contact your system administrator about the server certificate's common name and then configure Server ID.
223
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless
Network > IEEE 802.1x Authentication Methods
IEEE 802.1x Authentication Methods
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
LEAP (Wireless network)
Lightweight Extensible Authentication Protocol (LEAP) is a proprietary EAP method developed by Cisco
Systems, Inc., which uses a user ID and password for authentication.
EAP-FAST
Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling (EAP-FAST) has been
developed by Cisco Systems, Inc., which uses a user ID and password for authentication, and symmetric key
algorithms to achieve a tunnelled authentication process.
The Brother machine supports the following inner authentication methods:
• EAP-FAST/NONE
• EAP-FAST/MS-CHAPv2
• EAP-FAST/GTC
EAP-MD5 (Wired network)
Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5) uses a user ID and password for
challenge-response authentication.
PEAP
Protected Extensible Authentication Protocol (PEAP) is a version of EAP method developed by Cisco
Systems, Inc., Microsoft® Corporation and RSA Security. PEAP creates an encrypted Secure Sockets Layer
(SSL)/Transport Layer Security (TLS) tunnel between a client and an authentication server, for sending a user
ID and password. PEAP provides mutual authentication between the server and the client.
The Brother machine supports the following inner authentications:
• PEAP/MS-CHAPv2
• PEAP/GTC
EAP-TTLS
Extensible Authentication Protocol-Tunneled Transport Layer Security (EAP-TTLS) has been developed by
Funk Software and Certicom. EAP-TTLS creates a similar encrypted SSL tunnel to PEAP, between a client
and an authentication server, for sending a user ID and password. EAP-TTLS provides mutual authentication
between the server and the client.
The Brother machine supports the following inner authentications:
• EAP-TTLS/CHAP
• EAP-TTLS/MS-CHAP
• EAP-TTLS/MS-CHAPv2
• EAP-TTLS/PAP
EAP-TLS
Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) requires digital certificate
authentication both at a client and an authentication server.
Related Information
•Use IEEE 802.1x Authentication for a Wired or a Wireless Network
224
Home > Security > Network Security Features > Store Print Log to Network > Store Log to Network
Overview
Store Log to Network Overview
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a
network server using the Common Internet File System (CIFS) protocol. You can record the ID, type of print job,
job name, user name, date, time and the number of printed pages for every print job. CIFS is a protocol that runs
over TCP/IP, allowing computers on a network to share files over an intranet or the Internet.
The following print functions are recorded in the print log:
• Print jobs from your computer
• Web Connect Print
• The Store Print Log to Network feature supports Kerberos authentication and NTLMv2 authentication.
You must configure the SNTP protocol (network time server) for Authentication.
• You can set the file type to TXT or CSV when storing a file to the server.
Related Information
•Store Print Log to Network
226
Home > Security > Network Security Features > Store Print Log to Network > Configure the Store Print Log
to Network Settings Using Web Based Management
Configure the Store Print Log to Network Settings Using Web Based
Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Administrator tab.
5. Click the Store Print Log to Network menu.
6. In the Print Log field, click On.
7. Configure the following settings:
Option Description
Network Folder
Path
Type the destination folder where your log will be stored on the CIFS server (for
example: brother\abc).
File Name Type the file name you want to use for the print log (up to 32 characters).
File Type Select the TXT or CSV option for the Print Log file type.
Auth. Method Select the authentication method required for access to the CIFS server: Auto,
Kerberos, or NTLMv2. Kerberos is an authentication protocol which allows devices or
individuals to securely prove their identity to network servers using a single sign-on.
NTLMv2 is the authentication method used by Windows® to log into servers.
•Auto: If you select Auto, NTLMv2 will be used to the authentication method.
•Kerberos: Select the Kerberos option to use Kerberos authentication only.
•NTLMv2: Select the NTLMv2 option to use NTLMv2 authentication only.
• For the Kerberos and NTLMv2 authentication, you must also configure the
SNTP protocol (network time server) and DNS server.
Username Type the user name for the authentication (up to 96 characters).
If the user name is part of a domain, enter the user name in one of the
following styles: user@domain or domain\user.
Password Type the password for the authentication (up to 32 characters).
Kerberos
Server
Address (if
needed)
Type the KDC host address (for example: kerberos.example.com; up to 64 characters)
or the IP address (for example: 192.168.56.189).
Error Detection
Setting
Choose what action should be taken when the Print Log cannot be stored to the server
due to a network error.
8. In the Connection Status field, confirm the last log status.
227
You can also confirm the error status on the LCD of your machine.
9. Click Submit to display the Test Print Log to Network page.
To test your settings, click Yes and then go to the next step.
To skip the test, click No. Your settings will be submitted automatically.
10. The machine will test your settings.
11. If your settings are accepted, Test OK appears on the screen.
If Test Error appears, check all settings, and then click Submit to display the Test page again.
Related Information
•Store Print Log to Network
228
Home > Security > Network Security Features > Store Print Log to Network > Use the Store Print Log to
Network's Error Detection Setting
Use the Store Print Log to Network's Error Detection Setting
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the
server due to a network error.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the Store Print Log to Network menu in the left navigation bar.
5. In the Error Detection Setting section, select the Cancel Print or Ignore Log & Print option.
Option Description
Cancel
Print
If you select the Cancel Print option, the print jobs are cancelled when the print log cannot be
stored to the server.
Ignore Log
& Print
If you select the Ignore Log & Print option, the machine prints the documentation even if the
print log cannot be stored to the server.
When the store print log function has recovered, the print log is recorded as follows:
a. If the log cannot be stored at the end of printing, the print log except the number of printed
pages will be recorded.
b. If the print log cannot be stored at the beginning and the end of printing, the print log of
the job will not be recorded. When the function has recovered, the error is reflected in the
log.
6. Click Submit to display the Test Print Log to Network page.
To test your settings, click Yes and then go to the next step.
To skip the test, click No. Your settings will be submitted automatically.
7. The machine will test your settings.
8. If your settings are accepted, Test OK appears on the screen.
If Test Error appears, check all settings, and then click Submit to display the Test page again.
Related Information
•Store Print Log to Network
229
Home > Mobile/Web Connect > Use Web Services from Your Brother Machine
Use Web Services from Your Brother Machine
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Certain websites provide services that allow users to upload and view images and files on the website. Your
Brother machine can download and print images that are already uploaded to these services.
1. Printing
2. Photos, images, documents and other files
3. Web Service
The following services can be accessed from your Brother machine: Google Drive™, Dropbox, OneDrive® and
Box.
For more information, see the Web Connect Guide. Go to your model's Manuals page on the Brother Solutions
Center at support.brother.com.
Related Information
•Mobile/Web Connect
231
Home > Mobile/Web Connect > Print with Google Cloud Print™
Print with Google Cloud Print™
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Google Cloud Print™ is a Google-provided service that allows you to print to a printer registered to your Google
account using a network-compatible device (such as a mobile phone or computer) without installing the printer
driver on the device.
3
1
4
2
1. Print request
2. Internet
3. Google Cloud Print™
4. Printing
For more information, see the Google Cloud Print Guide. Go to your model's Manuals page on the Brother
Solutions Center at support.brother.com.
Related Information
•Mobile/Web Connect
232
Home > Mobile/Web Connect > Print with AirPrint
Print with AirPrint
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use Brother AirPrint to wirelessly print photos, emails, web pages, and documents from your iPad, iPhone and
iPod touch without installing a printer driver on the device.
1
2
1. Print request
2. Printed photos, emails, web pages, and documents
For more information, see the AirPrint Guide. Go to your model's Manuals page on the Brother Solutions Center
at support.brother.com.
Related Information
•Mobile/Web Connect
233
Home > Mobile/Web Connect > Print with Mopria™
Print with Mopria™
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Mopria™ Print Service is a print feature on Android™ mobile devices (Android™ version 4.4 or later) developed
by the Mopria™ Alliance. With this service, you can connect to the same network as your machine and print
without additional setup. Many native Android™ apps, including Google Chrome™, Gmail, and Gallery, support
printing.
1
2
3
1. Android™ 4.4 or later
2. Wi-Fi® Connection
3. Your Brother machine
You must download the Mopria™ Print Service from the Google Play™ Store and install it on your Android™
device. Be sure to turn the service on before using this feature.
Related Information
•Mobile/Web Connect
234
Home > Mobile/Web Connect > Print from a Mobile Device
Print from a Mobile Device
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use Brother iPrint&Scan to print from various mobile devices.
• For Android™ Devices
Brother iPrint&Scan allows you to use features of your Brother machine directly from your Android™ device,
without using a computer.
Download and install Brother iPrint&Scan from the Google Play™ Store.
• For iOS Devices
Brother iPrint&Scan allows you to use features of your Brother machine directly from your iPhone, iPod
touch, iPad, and iPad mini.
Download and install Brother iPrint&Scan from the App Store.
• For Windows Phone® Devices
Brother iPrint&Scan allows you to use features of your Brother machine directly from your Windows Phone®,
without using a computer.
Download and install Brother iPrint&Scan from the Windows Phone® Store (Windows Phone® Marketplace).
For more information, see the Mobile Print/Scan Guide for Brother iPrint&Scan. Go to your model's Manuals
page on the Brother Solutions Center at support.brother.com.
Related Information
•Mobile/Web Connect
235
Home > Mobile/Web Connect > Print Using Near-Field Communication (NFC)
Print Using Near-Field Communication (NFC)
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Near-Field Communication (NFC) allows for simple transactions, data exchange, and wireless connections
between two devices that are in close range of each other.
If your Android™ device is NFC-enabled, you can print data (photos, PDF files, text files, web pages and email
messages) from the device by touching it to the NFC logo on the right side of your machine's control panel.
You must download and install Brother iPrint&Scan on your Android™ device to use this feature. For more
information, see the Mobile Print/Scan Guide for Brother iPrint&Scan. Go to your model's Manuals page on the
Brother Solutions Center at support.brother.com.
Related Information
•Mobile/Web Connect
236
Home > Troubleshooting
Troubleshooting
Use this section to resolve typical problems you may encounter when using your Brother machine. You can
correct most problems yourself.
IMPORTANT
For technical help, you must call Brother customer service or your local Brother dealer.
Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability.
If you need additional help, go to the Brother Solutions Center at support.brother.com.
First, check the following:
• The machine's power cord is connected correctly and the machine's power is on. See the Quick Setup Guide.
• All of the protective materials have been removed. See the Quick Setup Guide.
• Paper is loaded correctly in the paper tray.
• The interface cables are securely connected to the machine and the computer, or the wireless connection is
set up on both the machine and your computer.
• Error and maintenance messages
If you did not solve the problem with the checks, identify the problem and then see Related Information.
Related Information
•Error and Maintenance Messages
•Paper Jams
•Printing Problems
•Improve the Print Quality
•Network Problems
•Other Problems
•Check the Machine Information
•Reset Functions
237
Home > Troubleshooting > Error and Maintenance Messages
Error and Maintenance Messages
(HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
If the LCD displays errors and your Android™ device supports the NFC feature, touch your device to the
NFC logo on your Brother machine to access the Brother Solutions Center and browse the latest FAQs
from your device. (Your mobile telephone provider's message and data rates may apply.)
Make sure the NFC settings of both your Brother machine and your Android™ device are set to On.
As with any sophisticated office product, errors may occur and supply items may have to be replaced. If this
happens, your machine identifies the error or required routine maintenance and shows the appropriate message.
The most common error and maintenance messages are shown in the table.
Follow the instructions in the Action column to solve the error and remove the message.
You can correct most errors and perform routine maintenance by yourself. If you need more tips: Visit
support.brother.com, and click FAQs & Troubleshooting.
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Error Message Cause Action
2-sided Disabled The back cover of the machine is
not closed completely.
Close the back cover of the machine until it
locks in the closed position.
The 2-sided tray is not installed
completely.
Install the 2-sided tray firmly in the machine.
Access Denied The function you want to use is
restricted by Secure Function
Lock 3.0.
Call your administrator to check your Secure
Function Lock Settings.
Cartridge Error The toner cartridge is not installed
correctly.
Remove the toner cartridge and drum unit
assembly. Take out the toner cartridge, and put
it back in the drum unit again. Reinstall the
toner cartridge and drum unit assembly in the
machine.
If the problem continues, contact Brother
customer service or your local Brother dealer.
Cooling Down The temperature of the inside of
the machine is too hot. The
machine will pause its current print
job and go into cooling down
mode.
Make sure you can hear the fan in the
machine spinning and that the exhaust outlet
is not blocked.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use it
for several minutes.
If the fan is not spinning, disconnect the
machine from the power for several minutes,
then reconnect it.
Cover is Open The front cover is not completely
closed.
Open and then firmly close the front cover of
the machine.
Cover is Open The fuser cover is not completely
closed.
Close the fuser cover located inside the back
cover of the machine.
238
Error Message Cause Action
Drum ! The corona wire on the drum unit
must be cleaned.
Clean the corona wire on the drum unit.
See Related Information: Clean the Corona
Wire.
If the problem continues, replace the drum unit
with a new one.
The drum unit or the toner
cartridge and drum unit assembly
is not installed correctly.
Remove the drum unit, remove the toner
cartridge from the drum unit, and put the toner
cartridge back into the drum unit. Reinstall the
drum unit in the machine.
Drum End Soon The drum unit is near the end of
its life.
Order a new drum unit before the LCD
displays Replace Drum.
Jam 2-sided The paper is jammed in the 2-
sided tray or inside the back
cover.
Remove the 2-sided tray and open the back
cover to pull out all jammed paper.
Jam Inside The paper is jammed inside the
machine.
Open the front cover, remove the toner
cartridge and drum unit assembly, and pull out
all jammed paper. Close the front cover.
Jam MP Tray The paper is jammed in the MP
tray.
Remove all jammed paper from in and around
the MP tray. Press Go.
Jam Rear The paper is jammed in the back
of the machine.
Open the fuser cover and remove all jammed
paper. Close the fuser cover.
Jam Tray 1
Jam Tray 2
Jam Tray 3
Jam Tray 4
The paper is jammed in the
indicated paper tray.
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
Limit Exceeded The print limit set in Secure
Function Lock 3.0 was reached.
Call your administrator to check your Secure
Function Lock Settings.
Media Mismatch The media type specified in the
printer driver differs from the
paper type specified in the
machine's menu.
Load the correct type of paper in the tray
indicated on the LCD, and then select the
correct media type in the Paper Type setting
on the machine.
No Drum Unit The drum unit is not installed
correctly.
Reinstall the toner cartridge and drum unit
assembly.
No Paper The machine is out of paper, or
paper is not loaded correctly in the
paper tray.
• Refill paper in the paper tray. Make sure
the paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
The machine failed to feed paper
from the indicated paper tray.
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
239
Error Message Cause Action
No Paper MP The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.
Do one of the following:
• Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
No Paper T1
No Paper T2
No Paper T3
No Paper T4
The machine failed to feed paper
from the indicated paper tray.
Do one of the following:
• Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
No Toner The toner cartridge or the toner
cartridge and drum unit assembly
is not installed correctly.
Remove the toner cartridge and drum unit
assembly. Remove the toner cartridge from the
drum unit, and reinstall the toner cartridge
back in the drum unit. Reinstall the toner
cartridge and drum unit assembly back in the
machine. If the problem continues, replace the
toner cartridge with a new one.
No Tray T1
No Tray T2
No Tray T3
No Tray T4
The paper tray is not installed or
not installed correctly.
Reinstall the paper tray indicated on the LCD.
Out of Memory The machine’s memory is full. Press Cancel and reduce the print resolution.
Print Data Full The machine’s memory is full. Press Cancel and delete the previously stored
secure print data.
Print Unable ## The machine has a mechanical
problem. • Press and hold to turn the machine off,
wait a few minutes, and then turn it on
again.
• If the problem continues, contact Brother
customer service.
Replace Drum It is time to replace the drum unit. Replace the drum unit with a new one.
See Related Information: Replace the Drum
Unit.
The drum unit counter was not
reset when a new drum was
installed.
Reset the drum unit counter.
See the instructions included with the new
drum unit.
Replace Toner The toner cartridge is at the end of
its life. The machine stops all print
operations.
Replace the toner cartridge with a new one.
Self-Diagnostic The temperature of the fuser unit
does not rise to a specified
temperature within the specified
time.
Press and hold to turn the machine off,
wait a few seconds, and then turn it on again.
Leave the machine idle for 15 minutes with the
power on.
The fuser unit is too hot.
Size Error The paper size defined in the
printer driver is not supported by
the defined tray.
Choose a paper size supported by the defined
tray.
240
Error Message Cause Action
Size Error DX The paper size specified in the
machine's paper size setting is not
available for automatic 2-sided
printing.
Press Cancel (if required).
Load the correct size of paper in the tray and
set the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper size available for automatic 2-sided
printing is A4.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Size Mismatch The paper in the tray is not the
correct size.
Load the correct size of paper in the tray
indicated on the LCD and set the size of paper
for the tray. Press Go.
Toner Low If the LCD displays this message,
you can still print. The toner
cartridge is near the end of its life.
Order a new toner cartridge now so you have
it ready when the LCD displays Replace
Toner.
Too Many Trays The number of installed Optional
Trays exceeds the maximum
number.
Reduce the number of Optional Trays.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Error Message Cause Action
2-sided Disabled The back cover of the machine is
not closed completely.
Close the back cover of the machine until it
locks in the closed position.
The 2-sided tray is not installed
completely.
Install the 2-sided tray firmly in the machine.
Access Denied The function you want to use is
restricted by Secure Function
Lock 3.0.
Call your administrator to check your Secure
Function Lock Settings.
Cartridge Error The toner cartridge is not installed
correctly.
Remove the toner cartridge and drum unit
assembly. Take out the toner cartridge, and put
it back in the drum unit again. Reinstall the
toner cartridge and drum unit assembly in the
machine.
If the problem continues, contact Brother
customer service or your local Brother dealer.
Cooling Down The temperature of the inside of
the machine is too hot. The
machine will pause its current print
job and go into cooling down
mode.
Make sure you can hear the fan in the
machine spinning and that the exhaust outlet
is not blocked.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use it
for several minutes.
If the fan is not spinning, disconnect the
machine from the power for several minutes,
then reconnect it.
Cover is Open The front cover is not completely
closed.
Open and then firmly close the front cover of
the machine.
Cover is Open The fuser cover is not completely
closed.
Close the fuser cover located inside the back
cover of the machine.
Cover is Open The Mailbox back cover is not
completely closed.
Close the Mailbox back cover.
241
Error Message Cause Action
Drum ! The corona wire on the drum unit
must be cleaned.
Clean the corona wire on the drum unit.
See Related Information: Clean the Corona
Wire.
If the problem continues, replace the drum unit
with a new one.
The drum unit or the toner
cartridge and drum unit assembly
is not installed correctly.
Remove the drum unit, remove the toner
cartridge from the drum unit, and put the toner
cartridge back into the drum unit. Reinstall the
drum unit in the machine.
Jam 2-sided The paper is jammed in the 2-
sided tray or inside the back
cover.
Remove the 2-sided tray and open the back
cover to pull out all jammed paper.
Jam Inside The paper is jammed inside the
machine.
Open the front cover, remove the toner
cartridge and drum unit assembly, and pull out
all jammed paper. Close the front cover.
Jam Mailbox The paper is jammed in the
Mailbox unit.
Remove all jammed paper from the Mailbox
unit as shown on the LCD.
Jam MP Tray The paper is jammed in the MP
tray.
Remove all jammed paper from in and around
the MP tray. Press Retry.
Jam Rear The paper is jammed in the back
of the machine.
Open the fuser cover and remove all jammed
paper. Close the fuser cover.
Jam Tray
Jam Tray1
Jam Tray2
Jam Tray3
Jam Tray4
The paper is jammed in the
indicated paper tray.
Pull out the paper tray and remove all jammed
paper as shown in the animation on the LCD.
Limit Exceeded The print limit set in Secure
Function Lock 3.0 was reached.
Call your administrator to check your Secure
Function Lock Settings.
Media Type Mismatch The media type specified in the
printer driver differs from the
paper type specified in the
machine's menu.
Load the correct type of paper in the tray
indicated on the LCD, and then select the
correct media type in the Paper Type setting
on the machine.
No Drum Unit The drum unit is not installed
correctly.
Reinstall the toner cartridge and drum unit
assembly.
No HUB Support A USB hub device is connected to
the USB host connector.
Disconnect the USB hub device from the USB
host connector.
No Paper The machine is out of paper, or
paper is not loaded correctly in the
paper tray.
• Refill paper in the paper tray. Make sure
the paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
242
Error Message Cause Action
No Paper Fed T1
No Paper Fed T2
No Paper Fed T3
No Paper Fed T4
The machine failed to feed paper
from the indicated paper tray.
Pull out the paper tray indicated on the LCD
and remove all jammed paper.
No Paper MP The MP tray is out of paper, or
paper is not loaded correctly in the
MP tray.
Do one of the following:
• Refill paper in the MP tray. Make sure the
paper guides are set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
No Paper T1
No Paper T2
No Paper T3
No Paper T4
The machine failed to feed paper
from the indicated paper tray.
Do one of the following:
• Refill paper in the paper tray indicated on
the LCD. Make sure the paper guides are
set to the correct size.
• If paper is in the tray, remove it and load it
again. Make sure the paper guides are set
to the correct size.
• Do not overfill the paper tray.
No Toner The toner cartridge or the toner
cartridge and drum unit assembly
is not installed correctly.
Remove the toner cartridge and drum unit
assembly. Remove the toner cartridge from the
drum unit, and reinstall the toner cartridge
back in the drum unit. Reinstall the toner
cartridge and drum unit assembly back in the
machine. If the problem continues, replace the
toner cartridge with a new one.
No Tray T1
No Tray T2
No Tray T3
No Tray T4
The paper tray is not installed or
not installed correctly.
Reinstall the paper tray indicated on the LCD.
Out of Memory The machine’s memory is full. Press and reduce the print resolution.
Output Tray Full The output paper tray is full. Remove printed paper from output tray
indicated on the LCD.
Paper Low
Paper Low Tray 1
Paper Low Tray 2
Paper Low Tray 3
Paper Low Tray 4
The paper tray is nearly empty. Refill the paper in the paper tray indicated on
the LCD.
Print Data Full The machine’s memory is full. Press and delete the previously stored
secure print data.
Print Unable ## The machine has a mechanical
problem. • Press and hold to turn the machine off,
wait a few minutes, and then turn it on
again.
• If the problem continues, contact Brother
customer service.
Replace Toner The toner cartridge is at the end of
its life. The machine stops all print
operations.
Replace the toner cartridge with a new one.
243
Error Message Cause Action
Screen Init. Fail The Touchscreen was pressed
before the power on initialisation
was completed.
Make sure nothing is touching the
Touchscreen.
Debris may be stuck between the
lower part of the Touchscreen and
its frame.
Insert a piece of stiff paper between the lower
part of the Touchscreen and its frame and
slide it back and forth to push out any debris.
Self-Diagnostic The temperature of the fuser unit
does not rise to a specified
temperature within the specified
time.
Press and hold to turn the machine off,
wait a few seconds, and then turn it on again.
Leave the machine idle for 15 minutes with the
power on.
The fuser unit is too hot.
Size Error The paper size defined in the
printer driver is not supported by
the defined tray.
Choose a paper size supported by the defined
tray.
Size Error 2-sided The paper size specified in the
machine's paper size setting is not
available for automatic 2-sided
printing.
Press (if required).
Load the correct size of paper in the tray and
set the tray for that paper size.
Choose a paper size supported by 2-sided
printing.
Paper size available for automatic 2-sided
printing is A4.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
Size Mismatch The paper in the tray is not the
correct size.
Load the correct size of paper in the tray
indicated on the LCD and set the size of paper
for the tray. Press Retry.
Supplies
Drum End Soon
The drum unit is near the end of
its life.
Order a new drum unit before the LCD
displays Replace Drum.
Supplies
Replace Drum
It is time to replace the drum unit. Replace the drum unit with a new one.
See Related Information: Replace the Drum
Unit.
The drum unit counter was not
reset when a new drum was
installed.
Reset the drum unit counter.
See the instructions included with the new
drum unit.
Supplies
Toner Low
If the LCD displays this message,
you can still print. The toner
cartridge is near the end of its life.
Order a new toner cartridge now so you have
it ready when the LCD displays Replace
Toner.
Too many bins Either bin 2 tray or bin 4 tray was
removed from the Mailbox unit.
To use the Mailbox unit in 2-bin mode, remove
both bin 2 tray and bin 4 tray.
To use the Mailbox unit in 4-bin mode, install
both bin 2 tray and bin 4 tray.
Too Many Trays The number of installed Optional
Trays exceeds the maximum
number.
Reduce the number of Optional Trays.
Unusable Device An unsupported USB device has
been connected to the USB host
connector.
Unplug the device from the USB host
connector.
Related Information
•Troubleshooting
•Replace Supplies
•Load and Print Using the Paper Tray
•Load and Print Using the Multi‑purpose Tray (MP Tray)
244
Home > Troubleshooting > Paper Jams
Paper Jams
Always remove the remaining paper from the paper tray and straighten the stack when you are adding new
paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents
paper jams.
•Paper is Jammed in the MP tray
•Paper is Jammed in the Paper Tray
•Paper is Jammed in the Back of the Machine
•Paper is Jammed inside the Machine
•Paper is Jammed in the 2-sided Tray
•Paper is Jammed in the Mailbox Unit
246
Home > Troubleshooting > Paper Jams > Paper is Jammed in the MP tray
Paper is Jammed in the MP tray
If the machine's control panel or the Status Monitor indicates that there is a jam in the machine's MP tray, follow
these steps:
1. Remove the paper from the MP tray.
2. Remove any jammed paper from in and around the MP tray.
3. Fan the paper stack, and then put it back in the MP tray.
4. Reload paper in the MP tray and make sure the paper stays under the maximum paper height guides (1) on
both sides of the tray.
1
5. Do one of the following:
• (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Press Go to resume printing.
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
Press [Retry] to resume printing.
Related Information
•Paper Jams
247
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray
Paper is Jammed in the Paper Tray
If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these
steps:
1. Pull the paper tray completely out of the machine.
2. Slowly pull out the jammed paper.
Pulling the jammed paper downward using both hands allows you to remove the paper more easily.
3. Fan the stack of paper to prevent further jams, and slide the paper guides to fit the paper size.
4. Make sure the paper is below the maximum paper mark (b b b).
248
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine
Paper is Jammed in the Back of the Machine
If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the
machine, follow these steps:
1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the
machine.
2. Open the back cover.
3. Pull the green levers at the left and right sides toward you to release the fuser cover.
WARNING
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching
them.
4. Use both hands to gently pull the jammed paper out of the fuser unit.
250
Home > Troubleshooting > Paper Jams > Paper is Jammed inside the Machine
Paper is Jammed inside the Machine
If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these
steps:
1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the
machine.
2. Open the front cover.
3. Remove the toner cartridge and drum unit assembly.
WARNING
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching
them.
4. Pull out the jammed paper slowly.
5. Install the toner cartridge and drum unit assembly into the machine.
252
Home > Troubleshooting > Paper Jams > Paper is Jammed in the 2-sided Tray
Paper is Jammed in the 2-sided Tray
If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow
these steps:
1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the
machine.
2. Pull the paper tray completely out of the machine.
3. At the back of the machine, pull the 2‑sided tray completely out of the machine.
4. Pull the jammed paper out of the machine or out of the 2‑sided tray.
5. Remove paper that may have jammed under the machine due to static electricity.
254
6. If paper is not caught inside the 2-sided tray, open the back cover.
WARNING
HOT SURFACE
The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching
them.
7. Use both hands to gently pull the jammed paper out of the back of the machine.
8. Close the back cover until it locks in the closed position.
9. Put the 2-sided tray firmly back in the rear of the machine.
10. Put the paper tray firmly back in the front of the machine.
Related Information
•Paper Jams
255
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Mailbox Unit
Paper is Jammed in the Mailbox Unit
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If the machine's control panel or the Status Monitor indicates that there is a jam in the Mailbox unit, follow these
steps:
1. Pull the jammed paper out of the Mailbox bin indicated on the LCD.
2. If the error continues, open the Mailbox's back cover.
3. Pull the jammed paper out of the Mailbox unit.
4. Close the Mailbox's back cover until it locks in the closed position.
Related Information
•Paper Jams
256
Home > Troubleshooting > Printing Problems
Printing Problems
Difficulties Suggestions
No printout Check that the correct printer driver has been installed
and selected.
Check to see if the Status Monitor or the machine's
control panel displays an error status.
Check that the machine is online:
• Windows® 7 and Windows Server® 2008 R2
Click /Start > Devices and Printers . Right-click
Brother XXX-XXXX and click See what's printing.
Click Printer in the menu bar. Make sure Use Printer
Offline is not selected.
• Windows Vista® and Windows Server® 2008
Click /Start > Control Panel > Hardware and
Sound > Printers. Right-click Brother XXX-XXXX.
Make sure Use Printer Online is not listed. If it is
listed, click this option to set the driver Online.
• Windows® XP and Windows Server® 2003
Click the Start > Printers and Faxes. Right-click
Brother XXX-XXXX. Make sure Use Printer Online is
not listed. If it is listed, click this option to set the driver
Online.
• Windows® 8 and Windows Server® 2012
Move your mouse to the lower right corner of your
desktop. When the menu bar appears, click Settings
> Control Panel > Hardware and Sound > View
devices and printers. Right-click the Brother XXX-
XXXX. Click See what's printing. If printer driver
options appear, select your printer driver. Click Printer
in the menu bar and make sure that Use Printer
Offline is not selected.
•Windows Server® 2012 R2
Click Control Panel on the Start screen. In the
Hardware group, click View devices and printers.
Right-click the Brother XXX-XXXX. Click See what’s
printing. If printer driver options appear, select your
printer driver. Click Printer in the menu bar and make
sure Use Printer Offline is not selected.
Check the machine is not in Power Off mode.
If the machine is in Power Off mode, press on the
control panel, and then send the print data again.
The machine is not printing or has stopped printing. (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/
HL-L5200DWT/HL-L6250DN) Press Cancel.
(HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT) Press .
The machine will cancel the print job and clear it from the
machine's memory. The printout may be incomplete.
Send the print data again.
The machine prints unexpectedly or it prints garbage. There is an unprintable area on the top and bottom of the
page. Adjust the top and bottom margins in your
document to allow for this.
257
Difficulties Suggestions
The headers or footers appear when the document
displays on the screen but they do not show up when it is
printed.
(HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/
HL-L5200DWT/HL-L6250DN) Press Cancel.
(HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT) Press .
Check the settings in your application to make sure they
are set up to work with your machine.
Confirm that the Brother printer driver is selected in your
application's Print window.
The machine prints the first couple of pages correctly,
then some pages have missing text.
Check the settings in your application to make sure they
are set up to work with your machine.
Your computer is not recognising the full signal of the
machine’s input buffer. Make sure you connected the
interface cable correctly.
The machine does not print on both sides of the paper
even though the printer driver setting is 2-sided and the
machine supports automatic 2-sided printing.
Check the paper size setting in the printer driver. You
must select A4 paper that is 60 to 105 g/m2.
Print speed is too slow. Try changing the printer driver setting. The highest
resolution needs longer data processing, sending and
printing time.
The machine does not feed paper. If there is paper in the paper tray, make sure it is straight.
If the paper is curled, straighten it. Sometimes it is helpful
to remove the paper, turn the stack over and put it back in
the paper tray.
Reduce the amount of paper in the paper tray, and then
try again.
Make sure MP Tray is not selected for Paper Source in
the printer driver.
Clean the paper pick-up rollers.
The machine does not feed paper from the MP tray. Fan the paper well and put it back in the MP tray firmly.
Make sure MP Tray is selected as Paper Source in the
printer driver.
The machine does not feed envelopes. Load envelopes in the MP tray. Your application must be
set to print the envelope size you are using. This is
usually done in the Page Setup or Document Setup menu
of your application.
Related Information
•Troubleshooting
•Monitor the Status of the Machine from Your Computer (Windows®)
•Monitor the Status of the Machine from Your Computer (Macintosh)
•Cancel a Print Job
•Load and Print Using the Paper Tray
•Clean the Paper Pick-up Rollers
•Load and Print Using the Multi‑purpose Tray (MP Tray)
258
Home > Troubleshooting > Improve the Print Quality
Improve the Print Quality
If you have a print quality problem, print a test page first. If the printout looks good, the problem is probably not
the machine. Check the interface cable connections and try printing a different document. If the printout or test
page printed from the machine has a quality problem, check the examples of poor print quality in the table and
follow the recommendations.
IMPORTANT
Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability.
1. To get the best print quality, we suggest using recommended print media. Make sure you use paper that
meets our specifications.
2. Check that the toner cartridge and drum unit are installed correctly.
Examples of poor print quality Recommendation
Faint
• If the machine indicates Replace Toner status, install a
new toner cartridge.
• Check the machine’s environment. Conditions such as
humidity, high temperatures, and so on, may cause
this print fault.
• If the whole page is too light, Toner Save may be
turned on. Turn off Toner Save mode in the machine's
menu settings or the printer driver.
• Clean the drum unit.
• Clean the corona wire on the drum unit.
• Replace the toner cartridge with a new toner cartridge.
• Replace the drum unit with a new drum unit.
Grey background
• Check the machine’s environment. Conditions such as
high temperatures and high humidity can increase the
amount of background shading.
• Clean the drum unit.
• Replace the toner cartridge with a new toner cartridge.
• Replace the drum unit with a new drum unit.
Ghost
• Check the machine’s environment. Conditions such as
low humidity and low temperatures may cause this
print quality problem.
• Select the appropriate media type in the printer driver.
• Select the appropriate media type in the menu setting.
• Clean the drum unit.
• Replace the drum unit with a new drum unit.
• Replace the toner cartridge with a new toner cartridge.
• The fuser unit may be contaminated.
Contact Brother customer service.
Toner specks
• Make sure the media type setting in the driver
matches the type of paper you are using.
• Clean the drum unit.
• The toner cartridge may be damaged.
Replace the toner cartridge with a new toner cartridge.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
259
Examples of poor print quality Recommendation
• The fuser unit may be contaminated.
Contact Brother customer service.
Hollow print
• Select Thick Paper mode in the printer driver or use
thinner paper than you are currently using.
• Select the appropriate media type in the menu setting.
• Check the machine’s environment. Conditions such as
high humidity can cause hollow print.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
All black
• Clean the corona wire inside the drum unit.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
White lines across the page
• Select the appropriate media type in the printer driver.
• Select the appropriate media type in the menu setting.
• The problem may disappear by itself. Print multiple
blank pages to clear this problem, especially if the
machine has not been used for a long time.
• Clean the drum unit.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
Lines across the page
• Clean the drum unit.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
White lines, bands or ribbing across the page
• Check the machine's environment. Conditions such as
high humidity and high temperatures may cause this
print quality problem.
• Clean the drum unit.
• If the problem is not solved after printing a few pages,
replace the drum unit with a new drum unit.
White Spots on black text and graphics at 94 mm
intervals
• If the problem is not solved after printing a few pages,
the drum unit may have foreign material, such as glue
from a label, stuck on the drum. Clean the drum unit.
See Related Information:Clean the Drum Unit.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
260
Examples of poor print quality Recommendation
Black spots at 94 mm intervals
Black toner marks across the page
• If you use label sheets for laser printers, the glue from
the sheets may sometimes stick to the drum surface.
Clean the drum unit.
See Related Information:Clean the Drum Unit.
• If you used paper that has clips or staples, the drum
unit may be damaged.
• If the unpacked drum unit is in direct sunlight (or room
light for long periods of time), the unit may be
damaged.
• Clean the drum unit.
• The toner cartridge may be damaged.
Replace the toner cartridge with a new toner cartridge.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
Black lines down the page
Printed pages have toner stains down the page
• Clean the corona wire inside the drum unit by sliding
the green tab.
Make sure that the green tab on the drum unit is in the
Home position.
• The toner cartridge may be damaged.
Replace the toner cartridge with a new toner cartridge.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
• The fuser unit may be contaminated.
Contact Brother customer service.
White lines down the page
• Make sure foreign material such as a torn piece of
paper, sticky notes or dust is not inside the machine
and around the toner cartridge and drum unit.
• The toner cartridge may be damaged.
Replace the toner cartridge with a new toner cartridge.
• The drum unit may be damaged.
Replace the drum unit with a new drum unit.
Image skewed
• Make sure the paper or other print media is loaded
correctly in the paper tray and the guides are not too
tight or too loose against the paper stack.
• Set the paper guides correctly.
• The paper tray may be too full.
• Check the paper type and quality.
• Check for loose objects such as torn paper inside the
machine.
• If the problem only occurs during automatic 2-sided
printing, check for torn paper in the 2-sided tray. Verify
the 2-sided tray is inserted completely and the back
cover is closed completely.
261
Examples of poor print quality Recommendation
Curled or wavy
• Check the paper type and quality. High temperatures
and high humidity will cause paper to curl.
• If you do not use the machine often, the paper may
have been in the paper tray too long. Turn over the
stack of paper in the paper tray. Also, fan the paper
stack, and then rotate the paper 180° in the paper
tray.
• Open the back cover (face up output tray) to let the
printed paper exit onto the face up output tray.
• Choose Reduce Paper Curl mode in the printer driver
when you do not use our recommended print media.
Wrinkles or creases
• Make sure paper is loaded correctly.
• Check the paper type and quality.
• Turn over the stack of paper in the tray or rotate the
paper 180° in the input tray.
Poor fixing
• Make sure the media type setting in the driver
matches the type of paper you are using.
• Choose Improve Toner Fixing mode in the printer
driver.
If this selection does not provide enough
improvement, change the printer driver setting in
Media Type to a thick setting. If you are printing an
envelope, choose Env. Thick in the media type
setting.
ABCDEFG
EFGHIJKLMN
Envelope creases
• Make sure envelopes are printed with the back cover
(face up output tray) opened.
• Make sure envelopes are fed only from the MP tray.
Related Information
•Troubleshooting
•Test Print
•Clean the Drum Unit
262
Home > Troubleshooting > Network Problems
Network Problems
•Error Messages
•Use the Network Connection Repair Tool (Windows®)
•Where Can I Find My Brother Machine's Network Settings?
•I Cannot Complete the Wireless Network Setup Configuration
•My Brother Machine Cannot Print over the Network
•I Want to Check that My Network Devices are Working Correctly
263
Home > Troubleshooting > Network Problems > Error Messages
Error Messages
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Your Brother machine will display an error message if an error occurs. The most common error messages are
shown in the table.
HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Error Messages Cause Action
Authentication
Error, contact
your
administrator.
Your authentication setting for
the Store Print Log to Network
feature is not correct.
• Make sure the Username and Password in
Authentication Setting are correct. If the username is
part of a domain, enter the username in one of the
following styles: user@domain or domain\user.
• Make sure the SNTP time server settings are
configured correctly so the time matches the time used
for authentication by Kerberos or NTLMv2.
Connection Error Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.
Make sure there are no other devices trying to connect to
the Wi-Fi Direct network, and then try to configure the Wi-
Fi Direct settings again.
Connection Fail The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are using the PIN Method of WPS, make sure
you have entered the correct PIN.
File Access
Error, contact
your
administrator.
The Brother machine cannot
access the destination folder for
the Store Print Log to Network
feature.
• Make sure the stored directory name is correct.
• Make sure the stored directory is write-enabled.
• Make sure the file is not locked.
Log Access Error In Web Based Management,
you have selected the Cancel
Print option in the Error
Detection Setting of Store
Print Log to Network.
Wait for about 60 seconds until this message disappears
from the LCD.
No Device When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your
mobile device.
• Make sure your machine and mobile device are in the
Wi-Fi Direct mode.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are manually configuring the Wi-Fi Direct
network, make sure you have entered the correct
password.
• If your mobile device has a configuration page for how
to obtain an IP address, make sure the IP address of
your mobile device has been configured via DHCP.
Server Timeout,
contact your
administrator.
The Brother machine cannot
connect to the server for the
Store Print Log to Network
feature.
• Make sure your server address is correct.
• Make sure your server is connected to the network.
• Make sure the machine is connected to the network.
Wrong Date&Time,
contact your
administrator.
The Brother machine does not
obtain the time from the SNTP
time server.
• Make sure the settings to access the SNTP time server
are configured correctly in Web Based Management.
264
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Error Messages Cause Action
A device is
already connected.
Press [OK].
Two mobile devices are already
connected to the Wi-Fi Direct
network when the Brother
machine is the Group Owner
(G/O).
After the current connection between your Brother
machine and another mobile device has shut down, try to
configure the Wi-Fi Direct settings again. You can
confirm the connection status by printing the Network
Configuration Report.
Authentication
error, contact
your
administrator.
Your authentication setting for
the Store Print Log to Network
feature is not correct.
• Make sure the Username and Password in
Authentication Setting are correct. If the username
is part of a domain, enter the username in one of the
following styles: user@domain or domain\user.
• Make sure the SNTP time server settings are
configured correctly so the time matches the time
used for authentication by Kerberos or NTLMv2.
Check User ID and
Password.
The Kerberos Authentication
error.
Make sure you have entered a correct user name and a
password for the Kerberos server. For more information
on the Kerberos server settings, contact your network
administrator.
The date, time and time zone
settings of the Brother machine
are not correct.
Confirm your machine's date, time and time zone
settings.
The DNS server configuration is
not correct.
Contact your network administrator for the information on
the DNS server settings.
The Brother machine cannot
connect to the Kerberos server.
Contact your network administrator for the information on
the Kerberos server settings.
Connection Error Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.
Make sure there are no other devices trying to connect to
the Wi-Fi Direct network, and then try to configure the
Wi-Fi Direct settings again.
Connection Failed The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are using the PIN Method of WPS, make sure
you have entered the correct PIN.
File access error,
contact your
administrator.
The Brother machine cannot
access the destination folder for
the Store Print Log to Network
feature.
• Make sure the stored directory name is correct.
• Make sure the stored directory is write-enabled.
• Make sure the file is not locked.
Log Access Error In Web Based Management,
you have selected the Cancel
Print option in the Error
Detection Setting of Store
Print Log to Network.
Wait for about 60 seconds until this message disappears
from the LCD.
No Device When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your
mobile device.
• Make sure your machine and mobile device are in the
Wi-Fi Direct mode.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are manually configuring the Wi-Fi Direct
network, make sure you have entered the correct
password.
• If your mobile device has a configuration page for
how to obtain an IP address, make sure the IP
address of your mobile device has been configured
via DHCP.
265
Error Messages Cause Action
Server timeout,
contact your
administrator.
The Brother machine cannot
connect to the server for the
Store Print Log to Network
feature.
• Make sure your server address is correct.
• Make sure your server is connected to the network.
• Make sure the machine is connected to the network.
The Brother machine cannot
connect to the LDAP server.
• Make sure your server address is correct.
• Make sure your server is connected to the network.
• Make sure the machine is connected to the network.
The Brother machine cannot
connect to the Active Directory®
server.
• Make sure your server address is correct.
• Make sure your server is connected to the network.
• Make sure the machine is connected to the network.
Wrong Date & Time,
contact your
administrator.
The Brother machine does not
obtain the time from the SNTP
time server.
• Make sure the settings to access the SNTP time
server are configured correctly in Web Based
Management.
Internal Error The Brother machine's LDAP
protocol is disabled.
Confirm your authentication method, and then enable the
necessary protocol setting in the Web Based
Management.
The Brother machine's CIFS
protocol is disabled.
Related Information
•Network Problems
266
Home > Troubleshooting > Network Problems > Use the Network Connection Repair Tool (Windows®)
Use the Network Connection Repair Tool (Windows®)
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct
IP address and Subnet Mask.
• (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7/Windows® 8)
You must log on with Administrator rights.
• Make sure the Brother machine is turned on and is connected to the same network as your computer.
1. Do one of the following:
Option Description
Windows® XP Click Start > All Programs > Accessories > Windows Explorer > My
Computer.
Windows Server® 2003/2008 Click Start > All Programs > Accessories > Windows Explorer >
Computer.
Windows Vista®/Windows® 7 Click (Start) > Computer.
Windows® 8 Click the (File Explorer) icon on the taskbar, and then click Computer
(This PC) in the left navigation bar.
Windows Server® 2012 /
2012 R2
Click Computer (This PC) on the Start screen.
2. Double-click XXX(C:) (where XXX is the name of your local disk drive) > Program Files > Browny02 >
Brother > BrotherNetTool.exe.
• For 64-bit OS users, double-click XXX(C:) (where XXX is the name of your local disk drive) > Program
Files (x86) > Browny02 > Brother > BrotherNetTool.exe.
• If the User Account Control screen appears, do one of the following:
- (Windows Vista®) Click Allow.
- (Windows® 7/Windows® 8) Click Yes.
3. Follow the on-screen instructions.
4. Check the diagnosis by printing the Network Configuration Report.
The Network Connection Repair Tool will start automatically if you select the Enable Connection Repair
Tool option in the Status Monitor. Right-click the Status Monitor screen, and then click Other Settings >
Enable Connection Repair Tool. This is not recommended when your network administrator has set the
IP address to Static, since it will automatically change the IP address.
If the correct IP address and the Subnet Mask are still not assigned even after using the Network Connection
Repair Tool, ask your network administrator for this information.
Related Information
•Network Problems
•Print the Network Configuration Report
•My Brother Machine Cannot Print over the Network
267
Home > Troubleshooting > Network Problems > I Cannot Complete the Wireless Network Setup
Configuration
I Cannot Complete the Wireless Network Setup Configuration
Related Models: HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to
resolve the problem, follow the instructions below:
Investigate the problem using the WLAN Report.
Cause Action Interface
Your security settings (SSID/
Network Key) are not
correct.
• Confirm the security settings using the Wireless Setup Helper
utility. For more information and to download the utility, go to your
model's Downloads page on the Brother Solutions Center at
support.brother.com.
• Select and confirm that you are using the correct security
settings.
- See the instructions supplied with your wireless LAN access
point/router for information on how to find the security
settings.
- The manufacturer's name or model number of the wireless
LAN access point/router may be used as the default security
settings.
- Consult with the access point/router manufacturer, your
Internet provider, or network administrator.
• For definitions of SSID and Network Key, see the entries SSID,
Network Key and Channels in the Glossary.
Wireless
Your Brother machine's MAC
address is not allowed.
Confirm that the Brother machine's MAC Address is allowed in the
filter. You can find the MAC Address on your Brother machine's
control panel.
Wireless
Your wireless LAN access
point/router is in stealth
mode (not broadcasting the
SSID).
• Enter the correct SSID name or Network Key manually.
• Check the SSID name or the Network Key in the instructions
supplied with your wireless LAN access point/router and
reconfigure the wireless network setup.
Wireless
Your security settings (SSID/
password) are not correct.
• Confirm the SSID and password.
- When you are configuring the network manually, the SSID
and password are displayed on your Brother machine. If your
mobile device supports the manual configuration, the SSID
and password will be displayed on your mobile device’s
screen.
• For the definition of SSID, see the Glossary.
Wi-Fi Direct
You are using Android™ 4.0. If your mobile device disconnects (approximately six minutes after
using Wi-Fi Direct), try the one-push configuration using WPS
(recommended) and set the Brother machine as a G/O.
Wi-Fi Direct
Your Brother machine is
placed too far from your
mobile device.
Move your Brother machine within about 3.3 feet (1 metre) of the
mobile device when you configure the Wi-Fi Direct network settings.
Wi-Fi Direct
There are some obstructions
(walls or furniture, for
example) between your
machine and the mobile
device.
Move your Brother machine to an obstruction-free area. Wi-Fi Direct
There is a wireless
computer, Bluetooth-
supported device,
microwave oven, or digital
Move other devices away from the Brother machine or the mobile
device.
Wi-Fi Direct
270
Cause Action Interface
cordless phone near the
Brother machine or the
mobile device.
If you have checked and
tried all of the above, but still
cannot complete the Wi-Fi
Direct configuration, do the
following:
• Turn your Brother machine off and back on. Then try to configure
the Wi-Fi Direct settings again.
• If you are using your Brother machine as a client, confirm how
many devices are allowed in the current Wi-Fi Direct network,
and then check how many devices are connected.
Wi-Fi Direct
For Windows®
If your wireless connection has been interrupted, and you have checked and tried all of the above, we
recommend using the Network Connection Repair Tool.
Related Information
•Network Problems
•Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
•Use Wi-Fi Direct®
271
Home > Troubleshooting > Network Problems > My Brother Machine Cannot Print over the Network
My Brother Machine Cannot Print over the Network
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Cause Action Interface
Your security software
blocks your machine's
access to the network.
Some security software might block access without showing a security
alert dialog box even after successful installation.
To allow access, see the instructions for your security software or ask
the software manufacturer.
Wired/Wireless
Your Brother machine was
not assigned an available
IP address.
• Confirm the IP address and the Subnet Mask.
Verify that both the IP addresses and Subnet Masks of your
computer and the Brother machine are correct and located on the
same network.
For more information about how to verify the IP address and the
Subnet Mask, ask your network administrator.
• (Windows®)
Confirm the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Wired/Wireless
The failed print job is still
in your computer's print
queue.
• If the failed print job is still in your computer's print queue, delete it.
• Otherwise, double-click the printer icon in the following folder and
cancel all documents:
- (Windows® XP/Windows Server® 2003)
Click Start > Printers and Faxes.
- (Windows Vista®)
Click (Start) > Control Panel > Hardware and Sound >
Printers.
- (Windows® 7)
Click (Start) > Devices and Printers > Printers and
Faxes.
- (Windows® 8)
Move your mouse to the lower right corner of your desktop.
When the menu bar appears, click Settings > Control Panel.
In the Hardware and Sound group, click View devices and
printers > Printers.
- (Windows Server® 2008)
Click Start > Control Panel > Printers.
-(Windows Server® 2012)
Move your mouse to the lower right corner of your desktop.
When the menu bar appears, click Settings > Control Panel.
In the Hardware group, click View devices and printers >
Printers.
-(Windows Server® 2012 R2)
Click Control Panel on the Start screen. In the Hardware
group, click View devices and printers.
- (OS X v10.8.5)
Click System Preferences > Print & Scan.
- (OS X v10.9.x, 10.10.x)
Click System Preferences > Printers & Scanners.
Wired/Wireless
272
Cause Action Interface
Your Brother machine is
not connected to the
wireless network.
Print the WLAN Report to check the error code on the printed report. Wireless
If you have checked and tried all of the above, but your Brother machine still cannot print, uninstall the printer
driver and reinstall it.
Related Information
•Network Problems
•Print the WLAN Report
•Wireless LAN Report Error Codes
•Use the Network Connection Repair Tool (Windows®)
•I Want to Check that My Network Devices are Working Correctly
273
Home > Troubleshooting > Network Problems > I Want to Check that My Network Devices are Working
Correctly
I Want to Check that My Network Devices are Working Correctly
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Check Action Interface
Check that your Brother
machine, access point/
router, or network hub is
turned on.
Check the following:
• The power cord is connected correctly and the Brother machine is
turned on.
• The access point/router or hub is turned on and its link button is
blinking.
• All protective packaging has been removed from the machine.
• The toner cartridge and drum unit are installed correctly.
• The front and back covers are fully closed.
• Paper is inserted correctly in the paper tray.
• (For wired networks) A network cable is securely connected to the
Brother machine and to the router or hub.
Wired/Wireless
Check the Link Status
in the Network
Configuration Report.
Print the Network Configuration Report and check that Ethernet Link
Status or Wireless Link Status is Link OK.
Wired/Wireless
Check that you can
"ping" the Brother
machine from your
computer.
Ping the Brother machine from your computer using the IP address or
the node name in the Windows® command prompt or Macintosh
Terminal application:
ping <ipaddress> or <nodename>.
• Successful: Your Brother machine is working correctly and
connected to the same network as your computer.
• Unsuccessful: Your Brother machine is not connected to the same
network as your computer.
(Windows®)
Ask the network administrator and use the Network Connection Repair
Tool to fix the IP address and the subnet mask.
(Macintosh)
Confirm that the IP address and the Subnet Mask are set correctly.
Wired/Wireless
Check that your Brother
machine is connected to
the wireless network.
Print the WLAN Report to check the error code on the printed report. Wireless
If you have checked and tried all of the above but you are still having problems, see the instructions supplied with
your wireless LAN access point/router to find the SSID and the Network Key information and set them correctly.
Related Information
•Network Problems
•Print the Network Configuration Report
•Print the WLAN Report
•Wireless LAN Report Error Codes
•Use the Network Connection Repair Tool (Windows®)
•My Brother Machine Cannot Print over the Network
274
Home > Troubleshooting > Other Problems
Other Problems
Difficulties Suggestions
The machine will not turn on. Adverse conditions on the power connection (such as
lightning or a power surge) may have triggered the
machine’s internal safety mechanisms. Unplug the power
cord. Wait for ten minutes, then plug in the power cord
and press to turn on the machine.
If the problem is not solved and you are using a power
breaker, disconnect it to make sure it is not the problem.
Plug the machine's power cord directly into a different
known working wall electrical socket. If there is still no
power, try a different power cable.
The machine cannot print EPS data that includes binary
with the BR-Script3 printer driver.
(Windows®)
To print EPS data, do the following:
1. For Windows® 7 and Windows Server® 2008 R2:
Click the (Start) button > Devices and Printers.
For Windows Vista® and Windows Server® 2008:
Click the (Start) button > Control Panel >
Hardware and Sound > Printers.
For Windows® XP and Windows Server® 2003:
Click the Start button > Printers and Faxes.
For Windows® 8 and Windows Server® 2012:
Move your mouse to the lower right corner of your
desktop. When the menu bar appears, click Settings
> Control Panel. In the Hardware and Sound 1
group, click View devices and printers.
For Windows Server® 2012 R2:
Click Control Panel on the Start screen. In the
Hardware group, click View devices and printers.
2. Right-click the Brother XXX-XXXX BR-Script3 icon,
select Printer properties.
3. From the Device Settings tab, choose TBCP (Tagged
binary communication protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB
interface, you cannot print EPS data that includes binary.
You can print the EPS data at the machine through a
network. For help installing the BR-Script3 printer driver
through the network, go to the Brother Solutions Center at
support.brother.com.
The Brother software cannot be installed. (Windows®)
If the Security Software warning appears on the computer
screen during the installation, change the Security
Software settings to permit the Brother product setup
program or other program to run.
(Macintosh)
If you are using a firewall function of anti-spyware or
antivirus security software, temporarily disable it and then
install the Brother software.
1For Windows Server® 2012: Hardware and Sound
275
Home > Troubleshooting > Check the Machine Information
Check the Machine Information
Follow these instructions to check your Brother machine's serial number and firmware version.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Machine Info.] option, and then press OK.
2. Press a or b to select one of the following options:
Option Description
Print Settings Print a list of your settings.
Print NetSetting
(For network models)
Print a list of your Network settings.
Print WLANReport
(For wireless models)
Print the wireless LAN connection results.
Print File List Print a list of data saved in the memory.
Test Print Print a test page.
Drum Dot Print Print the Drum Dot Check Sheet.
Print Font Print a list of the machine’s internal fonts.
Serial No. Check your machine's serial number.
Version Check your machine's firmware version.
Page Count Check the number of total pages the machine has printed.
Parts Life Check the percentage of the supplies' life that remains available.
3. Press OK.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Machine Information].
2. Press one of the following options:
Option Description
Print Settings Print a list of your settings.
Print NetSetting
(For network models)
Print a list of your Network settings.
Print WLANReport
(For wireless models)
Print the wireless LAN connection results.
Print File List Print a list of data saved in the memory.
Test Print Print a test page.
Drum Dot Print Print the Drum Dot Check Sheet.
277
Option Description
Print Font Print a list of the machine’s internal fonts.
Serial No. Check your machine's serial number.
Version Check your machine's firmware version.
Page Count Check the number of total pages the machine has printed.
Parts Life Check the percentage of the supplies' life that remains available.
3. Press .
Related Information
•Troubleshooting
278
Home > Troubleshooting > Reset Functions > Network Reset
Network Reset
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Use the Network Reset function to restore the print server's network settings, such as password and IP address,
back to its default factory settings.
• Unplug all the interface cables before you perform a Network Reset.
>> HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Reset Menu] option, and then press OK.
2. Press a or b to select the [Network] option, and then press OK.
3. Press a to select [Yes].
The machine will restart automatically.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Reset Menu] > [Network].
2. Press the option in the table to reset the machine or to exit the process.
Option Description
Yes Reset the machine.
No The machine will exit and cancel the reset menu.
3. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option Description
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No The machine will exit without rebooting.
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
4. Press .
You can also reset the Network settings by pressing [Settings] > [Network] > [Network
Reset].
Related Information
•Reset Functions
280
Home > Troubleshooting > Reset Functions > Factory Reset
Factory Reset
Use the Factory Reset function to restore all settings back to the factory settings.
Unplug all the interface cables before you perform a Factory Reset.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [Reset Menu] option, and then press OK.
2. Press a or b to select the [Factory Reset] option, and then press OK.
3. Press a to select [Reset].
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Reset Menu] > [Factory Reset].
2. Press the option in the table to reset the machine or to exit the process.
Option Description
Yes Reset the machine.
No The machine will exit and cancel the reset menu.
3. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the
process.
Option Description
Press Yes for 2 seconds Reboot the machine. The machine will begin the reset.
No The machine will exit without rebooting.
If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.
4. Press .
Related Information
•Reset Functions
281
Home > Routine Maintenance > Replace Supplies
Replace Supplies
You must replace supplies when the machine indicates that the life of the supply is over.
Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability.
• The toner cartridge and drum unit are two separate supplies. Make sure both are installed as an
assembly.
• The model name of supplies may vary depending on the country.
This table lists the messages to replace supplies when they reach their end of life. To avoid any inconvenience,
you may want to buy spare supplies to keep as replacements before the machine stops printing.
Indication Supply Model Name Approximate Life
Toner Low Toner cartridge TN-3430 1
TN-3480 2
TN-3512 3
TN-3520 4
(For Israel)
TN-3400 1
TN-3410 2
TN-3500 3
TN-3510 4
Approximately 3,000 pages
1 5 6
Approximately 8,000 pages
2 5 6
Approximately 12,000
pages 3 5 6
Approximately 20,000
pages 4 5 6
Replace Toner
Drum ! Drum unit DR-3400
(For Israel)
DR-3420
Approximately 30,000
pages / 50,000 pages 7
Drum End Soon
Replace Drum
1Standard toner cartridge
2High yield toner cartridge
3Super high yield toner cartridge (Available only for certain models)
4Ultra high yield toner cartridge (Available only for certain models)
5A4 or Letter size 1-sided pages.
6Approximate cartridge yield is declared in accordance with ISO/IEC 19752.
7Approximately 30,000 pages based on 1 page per job and 50,000 pages based on 3 pages per job [A4/letter simplex pages]. The number
of pages may be affected due to a variety of factors including but not limited to media type and media size.
NOTE
• Be sure to seal up the used supplies tightly in a bag so that toner powder does not spill out of the
cartridge.
• Visit http://www.brother.com/original/index.html for instructions on how to return your used supplies to the
Brother collection program. If you choose not to return your used supply, discard the used supply
according to local regulations, keeping it separate from domestic waste. If you have questions, contact
your local waste disposal office.
• We recommend placing used supplies on a piece of paper to prevent accidentally spilling or scattering
the material inside.
• If you use paper that is not a direct equivalent for the recommended print media, the life of supplies and
machine parts may be reduced.
• The projected life for each of the toner cartridges is based on ISO/IEC 19752. Frequency of replacement
will vary depending on the print volume, percentage of coverage, types of media used, and powering
on/off the machine.
283
• Frequency of replacing supplies except toner cartridges will vary depending on the print volume, types of
media used, and powering on/off the machine.
• Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately wipe or wash
it off with cold water.
• To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
Toner cartridge
Drum unit
Related Information
•Routine Maintenance
•Replace the Toner Cartridge
•Replace the Drum Unit
•Error and Maintenance Messages
•Supplies
284
Home > Routine Maintenance > Replace Supplies > Replace the Toner Cartridge
Replace the Toner Cartridge
1. Make sure the machine is turned on.
2. Open the front cover.
3. Remove the toner cartridge and drum unit assembly from the machine.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Unpack the new toner cartridge.
6. Remove the protective cover.
7. Put the new toner cartridge firmly into the drum unit until you hear it lock into place.
285
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left
several times.
Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on
the drum unit. If it is not, printed pages may have a vertical stripe.
9. Install the toner cartridge and drum unit assembly back into the machine.
10. Close the front cover of the machine.
• Do not turn off the machine or open the front cover until the machine returns to Ready Mode.
• The toner cartridge that comes with your Brother machine is a Inbox toner cartridge.
• It is a good idea to keep a new toner cartridge ready for use when you see the Toner Low warning.
• To ensure high quality printing, we recommend using only Brother Original toner cartridges. When you
want to buy toner cartridges, contact Brother Dealer.
• DO NOT unpack the new toner cartridge until you are ready to install it.
• If a toner cartridge is left unpacked for a long time, the toner life will be shortened.
• Brother strongly recommends you DO NOT refill the toner cartridge provided with your machine. We
also strongly recommend you continue to use only Brother Original replacement toner cartridges. Use
or attempted use of third party toner and/or cartridges in the Brother machine may cause damage to the
machine and/or may result in unsatisfactory print quality. Our limited warranty coverage does not apply
to any problem that is caused by the use of third party toner and/or cartridges. To protect your
investment and obtain premium performance from the Brother machine, we strongly recommend the
use of Brother Original Supplies.
286
Home > Routine Maintenance > Replace Supplies > Replace the Drum Unit
Replace the Drum Unit
1. Make sure the machine is turned on.
2. Open the front cover.
3. Remove the toner cartridge and drum unit assembly from the machine.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Unpack the new drum unit.
6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
288
7. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left
several times.
Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on
the drum unit. If it is not, printed pages may have a vertical stripe.
8. Install the toner cartridge and drum unit assembly back into the machine.
9. Close the front cover of the machine.
NOTE
• Drum wear and tear occurs due to use and rotation of the drum and interaction with paper, toner and
other materials in the paper path. In designing this product, Brother decided to use the number of
rotations of the drum as a reasonable determinant of the drum life. When a drum reaches the factory-
established rotation limit corresponding to the rated page yield, the product’s LCD will advise you to
replace the drum. The product will continue to function; however, print quality may not be optimal.
• If an unpacked drum unit is placed in direct sunlight (or room light for long periods of time), the unit may
be damaged.
• There are many factors that determine the actual drum life, such as the temperature, humidity, type of
paper, type of toner used and so on. Under ideal conditions, the average drum life is estimated at
approximately 30,000 pages based on 1 page per job and 50,000 pages based on 3 pages per job [A4/
letter simplex pages]. The number of pages may be affected due to a variety of factors including but not
limited to media type and media size.
Because we have no control over the many factors that determine the actual drum life, we cannot
guarantee a minimum number of pages that will be printed by your drum.
• For best performance, use only Brother Original toner.
• The machine should be used only in a clean, dust-free environment with adequate ventilation.
Printing with a non-Brother drum unit may reduce not only the print quality but also the quality and life of
the machine itself. Warranty coverage does not apply to problems caused by the use of a non-Brother
drum unit.
Related Information
•Replace Supplies
•Error and Maintenance Messages
289
Home > Routine Maintenance > Clean the Machine
Clean the Machine
Clean the outside and inside of the machine regularly with a dry, lint-free cloth.
When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed
pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.
WARNING
• DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or
ammonia to clean the inside or outside of the product. Doing so could cause a fire. Instead, use only a
dry, lint-free cloth.
IMPORTANT
• DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.
• To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.
Toner cartridge
Drum unit
Related Information
•Routine Maintenance
•Clean the Touchscreen LCD
•Clean the Corona Wire
290
Home > Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD
Clean the Touchscreen LCD
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
IMPORTANT
DO NOT use any type of liquid cleaners (including ethanol).
1. Press and hold to turn the machine off.
2. Clean the Touchscreen with a dry, soft lint-free cloth.
3. Press to turn the machine on.
Related Information
•Clean the Machine
292
Home > Routine Maintenance > Clean the Machine > Clean the Corona Wire
Clean the Corona Wire
If you have print quality problems or the control panel displays [Drum !] status, clean the corona wire.
1. Open the front cover.
2. Remove the toner cartridge and drum unit assembly from the machine.
3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left
several times.
Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on
the drum unit. If it is not, printed pages may have a vertical stripe.
4. Install the toner cartridge and drum unit assembly back into the machine.
5. Close the front cover of the machine.
Related Information
•Clean the Machine
•Error and Maintenance Messages
293
Home > Routine Maintenance > Clean the Machine > Clean the Drum Unit
Clean the Drum Unit
If your printout has dots or other repeating marks at 94 mm intervals, the drum may have foreign material, such
as glue from a label, stuck on the drum surface.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Make sure the machine is in Ready Mode.
2. Press a or b to display the [Machine Info.] option, and then press OK.
3. Press a or b to select the [Drum Dot Print] option.
4. Press OK.
The machine prints the Drum Dot Check Sheet.
5. Press and hold to turn the machine off.
6. Open the front cover.
ｌ
7. Remove the toner cartridge and drum unit assembly from the machine.
8. Push down the green lock lever and take the toner cartridge out of the drum unit.
9. Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side.
294
10. Use the numbered markers next to the drum roller to find the mark on the drum. For example, a dot in column
2 on the check sheet means that there is a mark in drum region “2”.
11. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark.
• To avoid print quality problems, DO NOT touch the surface of the drum unit, only the edge.
• You can turn the drum unit gear more easily by pulling down the black levers. When you have finished
turning the gear, push the levers back to the original position.
295
12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
13. Put the toner cartridge firmly into the drum unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
14. Install the toner cartridge and drum unit assembly back into the machine.
15. Close the front cover of the machine.
16. Press to turn the machine on.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Make sure the machine is in Ready Mode.
2. Press [Settings] > [Machine Information] > [Drum Dot Print].
3. Press [OK].
The machine prints the Drum Dot Check Sheet.
4. Press and hold to turn the machine off.
5. Open the front cover.
296
6. Remove the toner cartridge and drum unit assembly from the machine.
7. Push down the green lock lever and take the toner cartridge out of the drum unit.
8. Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side.
9. Use the numbered markers next to the drum roller to find the mark on the drum. For example, a dot in column
2 on the check sheet means that there is a mark in drum region “2”.
297
10. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark.
• To avoid print quality problems, DO NOT touch the surface of the drum unit, only the edge.
• You can turn the drum unit gear more easily by pulling down the black levers. When you have finished
turning the gear, push the levers back to the original position.
11. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
12. Put the toner cartridge firmly into the drum unit until you hear it lock into place.
298
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
13. Install the toner cartridge and drum unit assembly back into the machine.
14. Close the front cover of the machine.
15. Press to turn the machine on.
Related Information
•Clean the Machine
•Improve the Print Quality
299
Home > Routine Maintenance > Clean the Machine > Clean the Paper Pick-up Rollers
Clean the Paper Pick-up Rollers
Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds properly.
If you have paper feed problems, clean the pick-up rollers as follows:
1. Press and hold to turn the machine off.
2. Pull the paper tray completely out of the machine.
3. If paper is loaded or something is stuck inside in the paper tray, remove it.
4. Tightly wring out a lint-free cloth soaked in lukewarm water, and then wipe the separator pad on the paper
tray to remove dust.
5. Wipe the two pick-up rollers inside the machine to remove dust.
6. Reload the paper and put the paper tray firmly back in the machine.
7. Press to turn the machine on.
Related Information
•Clean the Machine
•Printing Problems
300
Home > Routine Maintenance > Check the Remaining Life of Parts
Check the Remaining Life of Parts
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [Machine Info.] option, and then press OK.
2. Press a or b to select the [Parts Life] option, and then press OK.
3. Press a or b to select the machine part you want to check, and then press OK.
The LCD displays the approximate remaining part life.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [Machine Information] > [Parts Life].
2. Press a or b to display the machine parts, and then press the machine part you want to check.
The LCD displays the approximate remaining part life.
3. Press .
Related Information
•Routine Maintenance
301
Home > Routine Maintenance > Pack and Ship Your Machine
Pack and Ship Your Machine
There are two ways to pack and ship your machine. To determine which you should follow, check the machine's
original packing material for a toner pad.
• If there is NO toner pad in the original carton, see Related Information: Pack the Machine and the Toner
Cartridge Together.
• If there is a toner pad in the original carton, see Related Information: Pack the Machine and the Toner
Cartridge Separately.
Toner Pad
Related Information
•Routine Maintenance
•Pack the Machine and the Toner Cartridge Together
•Pack the Machine and the Toner Cartridge Separately
302
Home > Routine Maintenance > Pack and Ship Your Machine > Pack the Machine and the Toner Cartridge
Together
Pack the Machine and the Toner Cartridge Together
WARNING
• When you move the machine, carry the machine as shown in the illustration below.
• If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the
machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you
or damage to the machine.
• Pack the Optional Tray(s) separately in its original carton with original packing material.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
1. Press and hold to turn the machine off. Leave the machine off for at least 10 minutes to cool down.
2. Disconnect all the cables, and then unplug the power cord from the electrical socket.
The machine is equipped with a non-detachable AC power cord depending on the model.
3. Put the machine into the bag it originally came in.
4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the
original packing material as shown.
303
Home > Routine Maintenance > Pack and Ship Your Machine > Pack the Machine and the Toner Cartridge
Separately
Pack the Machine and the Toner Cartridge Separately
WARNING
• When you move the machine, carry the machine as shown in the illustration below.
• If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the
machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you
or damage to the machine.
• Pack the Optional Tray(s) separately in its original carton with original packing material.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to
avoid any damage during transit. The machine should be adequately insured with the carrier.
1. Press and hold to turn the machine off. Leave the machine off for at least 10 minutes to cool down.
2. Disconnect all the cables, and then unplug the power cord from the electrical socket.
The machine is equipped with a non-detachable AC power cord depending on the model.
3. Remove the toner cartridge and drum unit assembly.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Put the protective material on the toner cartridge. Put it in a plastic bag.
305
6. Install only the drum unit back into the machine.
7. Close the front cover.
8. Put the machine into the bag it originally came in.
9. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the
original packing material as shown.
10. Close the carton and tape it shut.
11. If you have a Lower Tray, repack it as shown.
306
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings
General Settings
•Adjust the Machine's Volume
•Set Sleep Mode Countdown
•About Deep Sleep Mode
•Set Auto Power Off Mode
•Adjust the LCD Backlight Brightness
•Change How Long the LCD Backlight Stays On
•Reduce Toner Consumption
•Reduce Printing Noise
•Change the Language on the LCD
310
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust
the Machine's Volume
Adjust the Machine's Volume
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Volume] > [Beep].
2. Press a or b to display the [Off], [Low], [Med] or [High] option, and then press the option you want.
3. Press .
Related Information
•General Settings
311
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine
must be idle before it goes into Sleep Mode. The Sleep Mode timer is reset when the machine receives a print
job.
When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when
it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep
Mode.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to select the [General Setup] option, and then press OK.
2. Press a or b to select the [Ecology] option, and then press OK.
3. Press a or b to select the [Sleep Time] option, and then press OK.
4. Press a or b to enter the length of time, in minutes, that the machine should remain idle before entering Sleep
Mode.
Press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Ecology] > [Sleep Time].
2. Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and
then press [OK].
3. Press .
Related Information
•General Settings
312
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > About
Deep Sleep Mode
About Deep Sleep Mode
If the machine is in Sleep Mode and does not receive any jobs for certain length of time, the machine will
automatically enter Deep Sleep Mode. The length of time is based on your specific model and settings.
Deep Sleep Mode uses less power than Sleep Mode.
Applicable Models Machine's LCD in Deep Sleep Mode Conditions That Will Wake the
Machine
1-Line LCD models The LCD displays Deep Sleep. • The machine receives a job.
• Someone presses a button on the
control panel.
Touchscreen LCD models The LCD backlight turns off and
blinks.
• The machine receives a job.
• Someone presses or the
Touchscreen LCD.
Related Information
•General Settings
313
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Auto Power Off Mode
Set Auto Power Off Mode
If the machine is in Deep Sleep Mode for certain length of time, based on your model and settings, the machine
will go into Power Off Mode automatically. The machine does not go into Power Off Mode when the machine is
connected to a network or has secure print data in the memory.
• To start printing, press on the control panel and then send a print job.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Ecology] option, and then press OK.
3. Press a or b to select the [Auto Power Off] option, and then press OK.
4. Press a or b to select the option you want, and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Ecology] > [Auto Power Off].
2. Press a or b to display the [Off], [1hour], [2hours], [4hours] or [8hours] option, and then press the
option you want.
3. Press .
Related Information
•General Settings
314
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust
the LCD Backlight Brightness
Adjust the LCD Backlight Brightness
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If you are having difficulty reading the LCD, changing the brightness setting may help.
1. Press [Settings] > [General Setup] > [Panel Control] > [LCD Settings] >
[Backlight].
2. Press a or b to display the [Light], [Med] or [Dark] option, and then press the option you want.
3. Press .
Related Information
•General Settings
315
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
How Long the LCD Backlight Stays On
Change How Long the LCD Backlight Stays On
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Set how long the LCD backlight stays on after you return to the LCD's Home screen.
1. Press [Settings] > [General Setup] > [Panel Control] > [LCD Settings] > [Dim
Timer].
2. Press a or b to display the [Off], [10sec] , [20sec] or [30sec] option, and then press the option you
want.
3. Press .
Related Information
•General Settings
316
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce
Toner Consumption
Reduce Toner Consumption
Using the Toner Save feature may reduce toner consumption. When Toner Save is set to on, the print on your
documents appears lighter.
We DO NOT recommend using the Toner Save feature for printing photo or greyscale images.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Ecology] option, and then press OK.
3. Press a or b to display the [Toner Save] option, and then press OK.
4. Press a or b to display [On], and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Ecology] > [Toner Save].
2. Press [On] or [Off].
3. Press .
Related Information
•General Settings
317
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Reduce
Printing Noise
Reduce Printing Noise
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes
slower. The factory setting is off.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Ecology] option, and then press OK.
3. Press a or b to select the [Quiet Mode] option, and then press OK.
4. Press a or b to display the [On] or [Off] option, and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Ecology] > [Quiet Mode].
2. Press [On] or [Off].
3. Press .
Related Information
•General Settings
318
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
the Language on the LCD
Change the Language on the LCD
Change the LCD language if needed.
This feature is not available in some countries.
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to display the [Local Language] option, and then press OK.
3. Press a or b to display your language, and then press Go.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
1. Press [Settings] > [General Setup] > [Local Language].
2. Press your language.
3. Press .
Related Information
•General Settings
319
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables
Settings and Features Tables
The Settings tables will help you understand the menu selections and options that are found in the machine’s
programs.
•Access Menus and Change Your Machine's Settings
•Settings Tables (1 Line LCD models)
•Settings Tables (1.8 inch Touchscreen models)
•Features Tables (1.8 inch Touchscreen models)
320
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Access Menus and Change Your Machine's Settings
Access Menus and Change Your Machine's Settings
Related Models: HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Use the control panel to access the machine's menus and change various settings.
1. Scroll through each menu level by pressing a or b.
2. When the option you want appears on the LCD, press OK.
The LCD displays the next menu level.
3. Press a or b to scroll to your selection.
4. Press OK or Go.
5. When you have finished setting an option, the LCD displays [Accepted].
Related Information
•Settings and Features Tables
321
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (1 Line LCD models)
Settings Tables (1 Line LCD models)
Related Models: HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
[Machine Info.]
Level 1 Level 2 Description
Print Settings - Print the Printer Settings page.
Print NetSetting
(For network models)
- Print the Network Configuration Report.
Print WLANReport
(For wireless models)
- Print the wireless LAN connectivity diagnosis result.
Print File List - Print a list of data saved in the memory.
Test Print - Print the test page.
Drum Dot Print - Print the Drum Dot Check Sheet.
Print Font HP LaserJet Print the font list and samples of HP LaserJet.
BR-Script 3 Print the font list and samples of BR-Script.
Serial No. - Display the machine's serial number.
Version Main Version Display the main firmware version.
Sub1 Version Display the sub firmware version.
Page Count - Display the total printed pages.
Parts Life 1 Toner Life Display the remaining life of the toner cartridge.
Drum Life Display the remaining life of the drum unit.
PF KitMP Life Display the remaining life of the PF kit MP.
PF Kit1 Life Display the remaining life of the PF Kit 1.
PF Kit2 Life 2Display the remaining life of the PF Kit 2.
PF Kit3 Life 2Display the remaining life of the PF Kit 3.
PF Kit4 Life 2Display the remaining life of the PF Kit 4.
Fuser Life Display the remaining life of the fuser unit.
Laser Life Display the remaining life of the laser unit.
1Life is approximate and may vary by type of use.
2Available if the Lower Tray(s) is installed.
[Paper Tray]
Level 1 Level 2 Description
Tray Use - Select the tray that will be used.
Priority - When Auto is selected in Tray Use, select the order in which the machine
uses paper trays that contain paper of the same size.
Skip Tray - Select a specific tray you do not want to use; if it is loaded with paper of the
wrong size.
322
Level 1 Level 2 Description
Separator Tray - Select the tray that contains the paper used as the separator paper, which is
inserted between each print job.
2-sided 2-sided
Print
Select whether to print on both sides of the paper.
Single Image For a print job where the last page is a 1-sided image, select the 1-sided
Feed option to reduce printing time.
When you use Letterhead or Preprinted paper, you must select the 2-sided
Feed option. If you select 1-sided Feed for Letterhead or Preprinted paper,
the last page will be printed on the reverse side.
Paper Type MP Tray Select the paper type that matches the paper in the MP tray.
Tray1 Select the paper type that matches the paper in the standard paper tray.
Tray2 1Select the paper type that matches the paper in the Optional Tray (Tray 2).
Tray3 1Select the paper type that matches the paper in the Optional Tray (Tray 3).
Tray4 1Select the paper type that matches the paper in the Optional Tray (Tray 4).
Paper Size MP Tray Select the size of paper you loaded in the MP tray.
Tray1 Select the size of paper you loaded in the standard paper tray.
Tray2 1Select the size of paper you loaded in the Optional Tray (Tray 2).
Tray3 1Select the size of paper you loaded in the Optional Tray (Tray 3).
Tray4 1Select the size of paper you loaded in the Optional Tray (Tray 4).
Check Size - Select whether to display a message telling you to check that the size of the
paper in the machine and the machine's Paper Size setting match.
1Available if the Optional Tray(s) is installed.
[General Setup]
Level 1 Level 2 Description
Local Language - Select the LCD language for your country.
Resolution - Choose a print resolution.
Density - Increase or decrease the print density.
Ecology Toner Save Increase the page yield of the toner cartridge.
Sleep Time Set how much time will pass before the machine enters Power Saving
Mode.
Quiet Mode Decrease printing noise.
Auto Power Off Set the number of hours that the machine will remain in Deep Sleep
Mode before going into Power Off Mode.
Panel Control Button Repeat Set the time for the LCD message to change when holding a or b at
intervals.
Message Scroll Set the time in seconds that an LCD message will scroll across the
LCD. From Level 1=0.2 sec to Level 10=2.0 sec.
LCD Contrast Adjust the contrast of the LCD.
Auto Online Set the machine to return to Ready Mode after it has been idle for 30
seconds.
Setting Lock - Lock your machine’s settings using the Setting Lock password.
Interface Select Select the interface to use.
If you select Auto, the machine changes the interface to USB or
Network depending on which interface is receiving data.
323
Level 1 Level 2 Description
Interface Auto IF Time Set the time-out period for the auto interface selection.
Input Buffer Increase or decrease the input buffer capacity.
Inputprime
(Available only for
certain models)
Select if you want to use the signal of parallel ports as a reset.
Delete Storage Macro ID Delete the registered Macro data.
Font ID Delete the registered Font data.
Format Restore the Macro and Font data of your machine to the default
settings.
[Print Menu]
Level 1 Level 2 Description
Emulation - Choose the emulation mode.
Auto Continue - Select this setting if you want the machine to clear paper size errors or
media type errors, and use paper from other trays.
Paper Type - Set the type of paper.
Paper Size - Set the size of paper.
Copies - Set the number of printed pages.
Orientation - Set pages to print in either portrait or landscape orientation.
Print Position X Offset Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
Auto FF - Allow the machine to print any remaining data automatically.
HP LaserJet Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Symbol Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
324
Level 1 Level 2 Description
HP LaserJet Tray Command Select this setting if a tray mismatch appears when you use the HP
drivers.
Epson FX-850 Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Character Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto Mask Set the top and bottom margins to two-line each. When you set Auto
Mask to On, this setting overrides the Top Margin and Bottom Margin
settings.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
IBM Proprinter Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Character Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto Mask Set the top and bottom margins to two-line each. When you set Auto
Mask to On, this setting overrides the Top Margin and Bottom Margin
settings.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
BR-Script 3 Error Print Choose whether the machine prints the error information when errors
occur.
Carbon Menu Carbon Copy Enable or disable the Carbon Copy function.
Copies Set the number of printed pages.
Copy1 Tray Select the tray you use for Copy1.
325
Level 1 Level 2 Description
Carbon Menu Copy1 Macro
(Available only for
certain models)
Select a macro for Copy1.
Copy2 Tray …
Copy8 Tray
Select the tray you use for Copy2 to 8.
The menu appears when printing two pages or more.
Copy2 Macro …
Copy8 Macro
(Available only for
certain models)
Select a macro for Copy2 to 8.
The menu appears when printing two pages or more.
[Network] (HL-L5100DN/HL-L5100DNT/HL-L6250DN)
Level 1 Level 2 Description
TCP/IP Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot Tries Specify the number of attempts the machine will try to obtain an IP address
when the Boot Method is set to any setting except Static.
APIPA Allocate the IP address from the link-local address range automatically 1.
IPv6 Enable or disable the IPv6 protocol.
Ethernet - Choose the Ethernet link mode.
Wired Status - Display the Ethernet link status.
MAC Address - Display the MAC address of the machine.
IPsec - IPsec is an optional security feature of the IP protocol that provides
authentication and encryption services. We recommend contacting your
network administrator before changing this setting.
Network Reset - Restore all network settings of your machine to the factory settings.
1On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Network] (HL-L5200DW/HL-L5200DWT)
Level 1 Level 2 Level 3 Description
Wired LAN TCP/IP Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot
Tries
Specify the number of attempts the machine will try to obtain
an IP address when the Boot Method is set to any setting
except Static.
APIPA Allocate the IP address from the link-local address range
automatically 1.
IPv6 Enable or disable the IPv6 protocol.
Ethernet - Choose the Ethernet link mode.
Wired Status - Display the Ethernet link status.
MAC Address - Display the MAC address of the machine.
326
Level 1 Level 2 Level 3 Description
Wired LAN Set to Default - Restore wired network settings of your machine to the
factory settings.
Wired Enable - Turn the wired interface on or off.
WLAN TCP/IP Boot Method Choose the IP method that best suits your needs.
IP Address Enter the IP address.
Subnet Mask Enter the Subnet mask.
Gateway Enter the Gateway address.
IP Boot
Tries
Specify the number of attempts the machine will try to obtain
an IP address when the Boot Method is set to any setting
except Static.
APIPA Allocate the IP address from the link-local address range
automatically 1.
IPv6 Enable or disable the IPv6 protocol.
Setup Wizard - Configure the wireless network settings using the setup
wizard.
WLAN Assistant - Configure your wireless network settings using the Brother
CD-ROM.
WPS - Configure your wireless network settings using the one-
button push method.
WPS w/PIN Code - Configure the wireless network settings using WPS with a
PIN code.
WLAN Status Status Display the wireless Ethernet link status.
Signal Display the signal condition.
Channel Display the channel in use when Status is Active.
Speed Display the connection speed when Status is Active.
SSID Display SSID.
Comm. Mode Display the current Communication Mode.
MAC Address - Display the MAC address of the machine.
Set to Default - Restore wireless network settings of your machine to the
factory settings.
WLAN Enable - Turn the wireless interface on or off.
Wi-Fi Direct Push Button - Configure your Wi-Fi Direct network settings using the one-
button push method quickly.
PIN Code - Configure your Wi-Fi Direct network settings using WPS with
a PIN code quickly.
Manual - Configure your Wi-Fi Direct network settings manually.
Group Owner - Set your machine as the Group Owner.
Device Info. Device Name View your machine's device name.
SSID Display the Group Owner's SSID.
IP Address Display your machine's IP Address.
Status Info. Status Display the Wi-Fi Direct network status.
Signal Display the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel Display the channel in use when the Status is G/O
Active or Client Active.
327
Level 1 Level 2 Level 3 Description
Wi-Fi Direct Status Info. Speed Display the connection speed when the Status is G/O
Active or Client Active.
I/F Enable - Enable or disable the Wi-Fi Direct connection.
IPsec - - IPsec is an optional security feature of the IP protocol that
provides authentication and encryption services. We
recommend contacting your network administrator before
changing this setting.
Network Reset - - Restore all network settings of your machine to the factory
settings.
1On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Factory Reset] (Available only for certain models)
Description
Reset the machine and restore the printer settings (including command settings) to the factory settings.
[Reset Menu] (Available only for certain models)
Level 1 Description
Network Restore all network settings of your machine to the factory settings.
Factory Reset Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Related Information
•Settings and Features Tables
328
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (1.8 inch Touchscreen models)
Settings Tables (1.8 inch Touchscreen models)
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
[Settings] > [Machine Information]
Level 2 Level 3 Descriptions
Print Settings - Print the Printer Settings page.
Print NetSetting - Print the Network Configuration Report.
Print WLANReport
(For wireless models)
- Print the wireless LAN connectivity diagnosis result.
Print File List - Print a list of data saved in the memory.
Test Print - Print the test page.
Drum Dot Print - Print the Drum Dot Check Sheet.
Print Font HP LaserJet Print the font list and samples of HP LaserJet.
BR-Script 3 Print the font list and samples of BR-Script.
Serial No. - Display the machine's serial number.
Version Main Version Display the main firmware version.
Sub1 Version Display the sub firmware version.
Page Count - Display the total printed pages.
Parts Life 1 Toner Life Display the remaining life of the toner cartridge.
Drum Life Display the remaining life of the drum unit.
PF KitMP Life Display the remaining life of the PF kit MP.
PF Kit1 Life Display the remaining life of the PF Kit 1.
PF Kit2 Life 2Display the remaining life of the PF Kit 2.
PF Kit3 Life 2Display the remaining life of the PF Kit 3.
PF Kit4 Life 2Display the remaining life of the PF Kit 4.
Fuser Life Display the remaining life of the fuser unit.
Laser Life Display the remaining life of the laser unit.
1Life is approximate and may vary by type of use.
2Available if the Optional Tray(s) is installed.
[Settings] > [Paper Tray]
Level 2 Level 3 Descriptions
Tray Use - Select the tray that will be used.
Priority - When Auto is selected in Tray Use, select the order in which the machine
uses paper trays that contain paper of the same size.
Output Tray 1- Select the output tray you want.
MX Continue 1- Select if you want the machine to continue printing as soon as there is any
free space in the Mailbox (MX).
329
Level 2 Level 3 Descriptions
Skip Tray - Select a specific tray you do not want to use; if it is loaded with paper of the
wrong size.
Separator Tray - Select the tray that contains the paper used as the separator paper, which is
inserted between each print job.
2-sided 2-sided
Print
Select whether to print on both sides of the paper.
Single Image For a print job where the last page is a 1-sided image, select the 1-sided
Feed option to reduce printing time.
When you use Letterhead or Preprinted paper, you must select the 2-
sided Feed option. If you select 1-sided Feed for Letterhead or
Preprinted paper, the last page will be printed on the reverse side.
Paper Type MP Tray Select the paper type that matches the paper in the MP tray.
Tray 1 Select the paper type that matches the paper in the standard paper tray.
Tray 2 2Select the paper type that matches the paper in the Optional Tray (Tray 2).
Tray 3 2Select the paper type that matches the paper in the Optional Tray (Tray 3).
Tray 4 2Select the paper type that matches the paper in the Optional Tray (Tray 4).
Paper Size MP Tray Select the size of paper you loaded in the MP tray.
Tray 1 Select the size of paper you loaded in the standard paper tray.
Tray 2 2Select the size of paper you loaded in the Optional Tray (Tray 2).
Tray 3 2Select the size of paper you loaded in the Optional Tray (Tray 3).
Tray 4 2Select the size of paper you loaded in the Optional Tray (Tray 4).
Paper Low
Notice
Paper Low
Notice
Select whether to display a message telling you that the paper tray is nearly
empty.
Notice Level Select the minimum paper level that will trigger the message.
Check Size - Select whether to display a message telling you to check that the size of the
paper in the machine and the machine's Paper Size setting match.
1Available if the Mailbox is installed.
2Available if the Optional Tray(s) is installed.
[Settings] > [General Setup]
Level 2 Level 3 Level 4 Descriptions
Local Language - - Select the LCD language for your country.
Resolution - - Choose a print resolution.
Density - - Increase or decrease the print density.
Ecology Toner Save - Increase the page yield of the toner cartridge.
Sleep Time - Set how much time will pass before the machine enters Power
Saving Mode.
Quiet Mode - Decrease printing noise.
Auto Power Off - Set the number of hours that the machine will remain in Deep
Sleep Mode before going into Power Off Mode.
Volume Beep - Adjust the beeper volume.
Panel Control LCD Settings Backlight Adjust the brightness of the LCD backlight.
Dim Timer Set how long the LCD backlight stays on after the last finger
press.
330
Level 2 Level 3 Level 4 Descriptions
Setting Lock Set Password - Restrict unauthorised users from changing the machine’s
settings.
Lock Off⇒On -
Interface Select - Select the interface to use.
If you select Auto, the machine changes the interface to USB
or Network depending on which interface is receiving data.
Auto IF Time - Set the time-out period for the auto interface selection.
Input Buffer - Increase or decrease the input buffer capacity.
Delete Storage Macro ID - Delete the registered Macro data.
Font ID - Delete the registered Font data.
Format - Restore the Macro and Font data of your machine to the
default settings.
[Settings] > [Print Menu]
Level 2 Level 3 Descriptions
Emulation - Choose the emulation mode.
Auto Continue - Select this setting if you want the machine to clear paper size errors or
media type errors, and use paper from other trays.
Paper Type - Set the type of paper.
Paper Size - Set the size of paper.
Copies - Set the number of printed pages.
Orientation - Set pages to print in either portrait or landscape orientation.
Print Position X Offset Move the print start position (at the top-left corner of pages) horizontally up
to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset Move the print start position (at the top-left corner of pages) vertically up to
-500 (up) to +500 (down) dots in 300 dpi.
Auto FF - Allow the machine to print any remaining data automatically.
HP LaserJet Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Symbol Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
331
Level 2 Level 3 Descriptions
HP LaserJet Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
Tray Command Select this setting if a tray mismatch appears when you use the HP drivers.
Epson FX-850 Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Character Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto Mask Set the top and bottom margins to two-line each. When you set Auto
Mask to On, this setting overrides the Top Margin and Bottom Margin
settings.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
IBM Proprinter Font No. Set the font number.
Font Pitch Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Character Set Select the symbol or character set.
Table Print Print the code table.
Auto LF ON: CR -> CR+LF, OFF: CR -> CR
Auto CR ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto Mask Set the top and bottom margins to two-line each. When you set Auto
Mask to On, this setting overrides the Top Margin and Bottom Margin
settings.
Left Margin Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin Set the top margin distance from the top edge of the paper.
Bottom Margin Set the bottom margin distance from the bottom edge of the paper.
Lines Set the number of lines on each page.
BR-Script 3 Error Print Choose whether the machine prints the error information when errors
occur.
Carbon Menu Carbon Copy Enable or disable the Carbon Copy function.
Copies Set the number of printed pages.
332
Level 2 Level 3 Descriptions
Carbon Menu Copy1 Tray Select the tray you use for Copy1.
Copy1 Macro Select a macro for Copy1.
Copy2 Tray...
Copy8 Tray
Select the tray you use for Copy2 to 8.
The menu appears when printing two pages or more.
Copy2 Macro...
Copy8 Macro
Select a macro for Copy2 to 8.
The menu appears when printing two pages or more.
[Settings] > [Network]
Level 2 Level 3 Level 4 Level 5 Descriptions
Wired LAN TCP/IP Boot Method - Choose the IP method that best suits
your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary Specify the IP address of the primary
WINS server.
Secondary Specify the IP address of the secondary
WINS server.
DNS Server Primary Specify the primary DNS server's IP
address.
Secondary Specify the secondary DNS server's IP
address.
IP Boot Tries - Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
APIPA - Allocate the IP address from the link-local
address range automatically 1.
IPv6 - Enable or disable the IPv6 protocol.
Ethernet - - Choose the Ethernet link mode.
Wired Status - - Display the Ethernet link status.
MAC Address - - Display the MAC address of the machine.
Set to
Default
- - Restore wired network settings of your
machine to the factory settings.
Wired Enable - - Turn the wired interface on or off.
WLAN TCP/IP Boot Method - Choose the IP method that best suits
your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
WINS
Configuration
- Select the WINS configuration mode.
WINS Server Primary Specify the IP address of the primary
WINS server.
333
Level 2 Level 3 Level 4 Level 5 Descriptions
WLAN TCP/IP WINS Server Secondary Specify the IP address of the secondary
WINS server.
DNS Server Primary Specify the primary DNS server's IP
address.
Secondary Specify the secondary DNS server's IP
address.
IP Boot Tries - Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
APIPA - Allocate the IP address from the link-local
address range automatically 1.
IPv6 - Enable or disable the IPv6 protocol.
Setup Wizard - - Configure the wireless network settings
using the setup wizard.
WLAN
Assistant
- - Configure your wireless network settings
using the Brother CD-ROM.
WPS - - Configure your wireless network settings
using the one-button push method.
WPS w/ PIN
Code
- - Configure the wireless network settings
using WPS with a PIN code.
WLAN Status Status - Display the wireless Ethernet link status.
Signal - Display the signal condition.
SSID - Display SSID.
Comm. Mode - Display the current Communication
Mode.
MAC Address - - Display the MAC address of the machine.
Set to
Default
- - Restore wireless network settings of your
machine to the factory settings.
WLAN Enable - - Turn the wireless interface on or off.
Wi-Fi Direct Push Button - - Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
PIN Code - - Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
Manual - - Configure your Wi-Fi Direct network
settings manually.
Group Owner - - Set your machine as the Group Owner.
Device Info. Device Name - View your machine's device name.
SSID - Display the Group Owner's SSID.
IP Address - Display your machine's IP Address.
Status Info. Status - Display the Wi-Fi Direct network status.
Signal - Display the current Wi-Fi Direct network
signal strength.
I/F Enable - - Enable or disable the Wi-Fi Direct
connection.
NFC - - - Turn the NFC function on or off.
334
Level 2 Level 3 Level 4 Level 5 Descriptions
Web Connect
Settings
Proxy
Settings
Proxy Connection - Change the web connection settings.
Address -
Port -
User Name -
Password -
Security IPsec - - IPsec is an optional security feature of
the IP protocol that provides
authentication and encryption services.
We recommend contacting your network
administrator before changing this
setting.
Network
reset
- - - Restore all network settings of your
machine to the factory settings.
1On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Settings] > [Reset Menu]
Level 2 Level 3 Descriptions
Network - Restore all network settings of your machine to the factory settings.
Factory Reset - Reset the machine and restore the printer settings (including command settings) to the
factory settings.
Related Information
•Settings and Features Tables
•Mailbox Continue
335
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Features Tables (1.8 inch Touchscreen models)
Features Tables (1.8 inch Touchscreen models)
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
(Toner)
Level 2 Level 3 Descriptions
(Toner)Toner Life View the approximate remaining toner life.
Test Print Print the test page.
(Wi-Fi Setup)
Level 2 Level 3 Descriptions
(Wi-Fi Setup)Setup Wizard Configure the wireless network settings using the setup wizard.
WLAN Assistant Configure your wireless network settings using the Brother CD-ROM.
WPS Configure your wireless network settings using the one-button push method.
[Web]
Level 2 Level 3 Descriptions
Web OneDrive®Connect the Brother machine to an Internet service.
Web services may have been added and service names may have been changed by the
provider since this document was published.
Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to
download the Web Connect Guide.
Box
Google
Drive™
Dropbox
Related Information
•Settings and Features Tables
336
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings
Using Web Based Management
Change Machine Settings Using Web Based Management
Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper
Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
•What is Web Based Management?
•Access Web Based Management
•Set a Login Password for Web Based Management
•Network Management Software and Utilities
338
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings
Using Web Based Management > What is Web Based Management?
What is Web Based Management?
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper
Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your
machine's IP address into your web browser to access and change your print server settings.
• We recommend Microsoft® Internet Explorer® 8.0/10.0/11.0 for Windows®, and Safari 8.0 for Macintosh.
Make sure that JavaScript and Cookies are always enabled in whichever browser you use. If you use
different web browser, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
• You must use the TCP/IP protocol on your network and have a valid IP address programmed into the
print server and your computer.
• The actual screen may differ from the screen shown above.
• The following explanations are examples. The available functions vary according to the model.
General
Use this tab to confirm the current status of your Brother machine and to change basic settings, such as the
timer settings.
Print
Use this tab to confirm and change the print settings.
Administrator
Use this tab to set the Web Based Management password, reset various settings, and configure the function
settings that are mainly used by administrators. You can also use Secure Function Lock to restrict functions
according to the user.
Network
Use this tab to change the network settings, enable or disable the network protocols, and configure the
security and certificate settings.
339
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings
Using Web Based Management > Access Web Based Management
Access Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
• We recommend using the HTTPS security protocol when configuring settings using Web Based
Management.
• When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog
box.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
You can now change the print server settings.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the
configuration.
Related Information
•Change Machine Settings Using Web Based Management
•Print the Network Configuration Report
341
Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings
Using Web Based Management > Set a Login Password for Web Based Management
Set a Login Password for Web Based Management
Related Models: HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/HL-L6400DWT
We recommend setting a login password to prevent unauthorised access to Web Based Management.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
• If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such
as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
• For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click .
4. Click Administrator.
5. Type the password you want to use in the Enter New Password field (up to 32 characters).
6. Retype the password in the Confirm New Password field.
7. Click Submit.
In the future, every time you access Web Based Management, type the password in the Login field, and then
click .
After configuring the settings, log off by clicking .
If you have not previously set a login password, you can also set a password by clicking the Please
configure the password button on the machine's web page.
Related Information
•Change Machine Settings Using Web Based Management
342
Home > Appendix > Specifications
Specifications
General Specifications
Printer Type Laser
Print Method Electrophotographic Laser Printer
Memory Capacity Standard • (HL-L5000D)
128 MB
• (HL-L5100DN/HL-L5100DNT/HL-L5200DW/
HL-L5200DWT/HL-L6250DN/HL-L6300DW/
HL-L6300DWT)
256 MB
• (HL-L6400DW/HL-L6400DWT)
512 MB
LCD (liquid crystal display) • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT/HL-L6250DN)
16 characters x 1 line
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
1.8 in. TFT Colour Touchscreen LCD 1
Power Source 220 to 240 V AC 50/60Hz
Power
Consumption
(Average)
Peak
2
• Approximately 1,344 W
Printing 2• (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
Approximately 640 W at 25 °C
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT)
Approximately 740 W at 25 °C
• (HL-L6400DW/HL-L6400DWT)
Approximately 770 W at 25 °C
Printing
(Quiet Mode) 2
• Approximately 390 W at 25 °C
Ready 2Approximately 32 W at 25 °C
Sleep 2• (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Approximately 6.5 W
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
Approximately 7.3 W
Deep Sleep 2• (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Approximately 1.2 W
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
Approximately 1.6 W
Power Off 3 4 Approximately 0.04 W
1Measured diagonally
2Measured when the machine is connected to the USB interface.
344
Dimensions Unit: mm
• (HL-L5000D/HL-L5100DN/HL-L5200DW)
* 373
** 255
**** 388
• (HL-L6250DN)
* 373
** 287
**** 388
• (HL-L5100DNT/HL-L5200DWT)
* 373
*** 387
**** 388
Unit: mm
• (HL-L6300DW/HL-L6400DW)
* 400
** 288
**** 396
• (HL-L6300DWT/HL-L6400DWT)
* 400
*** 420
**** 396
Weights (with supplies) • (HL-L5000D/HL-L5100DN/HL-L5200DW)
10.7 kg
• (HL-L6250DN)
12.4 kg
• (HL-L6300DW)
13.2 kg
• (HL-L6400DW)
13.4 kg
• (HL-L5100DNT/HL-L5200DWT)
14.6 kg
• (HL-L6300DWT)
17.1 kg
• (HL-L6400DWT)
17.3 kg
3Measured according to IEC 62301 Edition 2.0.
4Power consumption varies slightly depending on the usage environment.
345
Noise Level Sound
Pressure
Printing • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
LpAm = 52.0 dB (A)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT/
HL-L6400DW/HL-L6400DWT)
LpAm = 54.0 dB (A)
Printing
(Quiet Mode)
LpAm = 50.0 dB (A)
Ready • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
LpAm = 34.0 dB (A)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT/
HL-L6400DW/HL-L6400DWT)
LpAm = 35.0 dB (A)
Sound Power Printing 5 6 • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
LWAd = 6.80 B (A)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT)
LWAd = 6.84 B (A)
• (HL-L6400DW/HL-L6400DWT)
LWAd = 6.92 B (A)
Printing
(Quiet Mode)
LWAd = 6.47 B (A)
Ready 5 6 • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
LWAd = 4.75 B (A)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT)
LWAd = 4.98 B (A)
• (HL-L6400DW/HL-L6400DWT)
LWAd = 4.70 B (A)
Temperature Operating 10 to 32 °C
Storage 0 to 40 °C
Humidity Operating 20 to 80% (without condensation)
Storage 35 to 85% (without condensation)
Print Media Specifications
Paper Input Paper Tray
(Standard)
Paper Type Plain Paper, Letterhead, Coloured Paper, Thin Paper,
Recycled Paper, Thick Paper 7
Paper Size
A4, Letter, A5, A5 (Long Edge), A6, Executive, Legal,
Folio, Mexico Legal, India Legal
Paper Weight 60 to 120 g/m2
Maximum
Paper
Capacity
• (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT)
Up to 250 sheets of 80 g/m2 Plain Paper
5Measured in accordance with the method described in RAL-UZ171.
6Office equipment with LWAd>6.30 B(A) is not suitable for use in room where people require high levels of concentration. Such equipment
should be placed in separate rooms because of noise emissions.
7Open the back cover (face up output tray) before printing to let the printed paper exit onto the face up output tray.
346
Paper Input Paper Tray
(Standard)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT/
HL-L6400DW/HL-L6400DWT)
Up to 520 sheets of 80 g/m2 Plain Paper
Multi-purpose tray (MP
tray)
Paper Type Plain Paper, Letterhead, Coloured Paper, Thin Paper,
Thick Paper, Thicker Paper, Recycled Paper, Bond, Label,
Envelope, Env.Thin, Env.Thick
Paper Size Width:
76.2 to 215.9 mm
Length:
127 to 355.6 mm
Paper Weight 60 to 200 g/m2
Maximum
Paper
Capacity
Up to 50 sheets of 80 g/m2 Plain Paper
Envelope: 10 envelopes up to 10 mm thick
Paper Tray 2, 3, 4
(Optional) 8 9 10
Paper Type Plain Paper, Letterhead, Coloured Paper, Thin Paper,
Recycled Paper, Thick Paper 7
Paper Size
A4, Letter, A5, Executive, Legal, Folio, Mexico Legal,
India Legal
Paper Weight 60 to 120 g/m2
Maximum
Paper
Capacity
(LT-5500/LT-5505 )
Up to 250 sheets of 80 g/m2 Plain Paper
(LT-6500/LT-6505)
Up to 520 sheets of 80 g/m2 Plain Paper
Paper
Output 11
Face Down Output Tray • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT/HL-L6250DN)
Up to 150 Sheets of 80 g/m2 Plain Paper (face down
delivery to the face down output paper tray)
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
Up to 250 Sheets of 80 g/m2 Plain Paper (face down
delivery to the face down output paper tray)
Face Up Output Tray • (HL-L5000D/HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT/HL-L6250DN)
One sheet (face up delivery to the face up output tray)
• (HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
Up to 10 sheets (face up delivery to the face up output
tray)
Mailbox MX-4000
(Optional)
(HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT)
100 sheets x 4 bins of 80 g/m2
400 sheets x 2 bins of 80 g/m2
2-sided Automatic 2-sided
Printing
Paper Type Plain Paper, Letterhead, Coloured Paper, Thin Paper,
Recycled Paper
8HL-L5000D/HL-L5100DN/HL-L5200DW :You can install up tp two Lower Trays 250 sheets (LT-5500) or 520 sheets (LT-6500).
9HL-L6250DN/HL-L6300DW/HL-L6400DW :You can install up to two Lower Trays 250 sheets (LT-5500/LT-5505) or 520 sheets (LT-6500/
LT-6505) or three Lower Trays 250 sheets (LT-5500/LT-5505)
10 HL-L5100DNT/HL-L5200DWT/HL-L6300DWT/HL-L6400DWT :You can install one Lower Tray 250 sheets (LT-5500/LT-5505) or 520 sheets
(LT-6500/LT-6505).
11 For labels, we recommend removing the printed sheets from the output paper tray immediately after they exit the machine to avoid the
possibility of smudging.
347
2-sided Automatic 2-sided
Printing
Paper Size A4
Paper Weight 60 to 105 g/m2
Printer Specifications
Automatic 2-sided Print Yes
Emulation PCL6, BR-Script3, IBM Proprinter XL, Epson FX-850, PDF version1.7, XPS
version 1.0
Resolution Up to 1200 x 1200 dpi
Print Speed 12 13 1-sided print • (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT)
Up to 42 pages/minute (Letter size)
Up to 40 pages/minute (A4 size)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT)
Up to 48 pages/minute (Letter size)
Up to 46 pages/minute (A4 size)
• (HL-L6400DW/HL-L6400DWT)
Up to 52 pages/minute (Letter size)
Up to 50 pages/minute (A4 size)
2-sided Print • (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT)
Up to 20 sides/minute (Up to 10 sheets/minute) (Letter or A4 size)
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
Up to 24 sides/minute (Up to 12 sheets/minute) (Letter or A4 size)
First Print Time 14 • (HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT)
Less than 7.2 seconds at 23 °C / 230 V
• (HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT)
Less than 7.5 seconds at 23 °C / 230 V
Interface Specifications
Parallel 15 HL-L5000D Compliant with IEEE1284
USB 16 17 All Hi-Speed USB 2.0
Use a USB 2.0 interface cable that is no longer than 6 ft (2 m).
LAN HL-L5100DN/HL-L5100DNT/
HL-L5200DW/HL-L5200DWT
10BASE-T/100BASE-TX 18
HL-L6250DN/HL-L6300DW/
HL-L6300DWT/HL-L6400DW/
HL-L6400DWT
10BASE-T/100BASE-TX/1000Base-T 18 19
Wireless LAN HL-L5200DW/HL-L5200DWT/
HL-L6300DW/HL-L6300DWT/
HL-L6400DW/HL-L6400DWT
IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)
IEEE 802.11g/n (Wi-Fi Direct)
12 The print speed may change depending on the type of document you print.
13 Print speed may be slower when the machine is connected by wireless LAN.
14 From Ready mode and standard tray
15 If the parallel cable is not provided with the machine in your country or region, please contact Brother customer service or your local Brother
dealer to purchase the optional parallel cable (PC-5000).
16 Your machine has a USB 2.0 Hi-Speed interface. The machine can also be connected to a computer that has a USB 1.1 interface.
17 Third party USB ports are not supported.
18 Use a straight-through Category 5 (or greater) twisted-pair cable.
19 When you connect the machine to a Gigabit Ethernet Network, use network devices complying with the 1000BASE-T specification.
348
NFC HL-L6300DW/HL-L6300DWT/
HL-L6400DW/HL-L6400DWT
Yes
Supported Protocols and Security Features
Ethernet
10Base-T/100Base-TX/1000Base-T
Wireless LAN
IEEE 802.11b/g/n (Infrastructure Mode/Ad-hoc Mode), IEEE 802.11g/n (Wi-Fi Direct)
Protocols (IPv4)
ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR
responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Server, TELNET Server, HTTP/HTTPS
server, TFTP client and server, SMTP Client, SNMPv1/v2c/v3, ICMP, Web Services (Print), CIFS client, SNTP
client, LDAP (available only for certain models)
Protocols (IPv6)
NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP
Server, TELNET Server, HTTP/HTTPS server, TFTP client and server, SMTP Client, SNMPv1/v2c, ICMPv6,
Web Services (Print), CIFS Client, SNTP Client, LDAP (available only for certain models)
Network Security (Wired)
SMTP-AUTH, SSL/TLS (IPPS, HTTPS, SMTP), SNMP v3 802.1x (EAP-MD5, EAP-FAST, PEAP, EAP-TLS,
EAP-TTLS), Kerberos, IPSec
Network Security (Wireless)
SMTP-AUTH, SSL/TLS (IPPS, HTTPS, SMTP), SNMP v3 802.1x (LEAP, EAP-FAST, PEAP, EAP-TLS, EAP-
TTLS), Kerberos, IPSec
Wireless Network Security
WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES)
Wireless Certification
Wi-Fi Certification Mark License (WPA™/WPA2™ - Enterprise, Personal), Wi-Fi Protected Setup (WPS)
Identifier Mark License, Wi-Fi CERTIFIED Wi-Fi Direct
Computer Requirements Specifications
Supported Operating Systems And Software Functions
Computer Platform &
Operating System Version
PC Interface Pr
oc
es
so
r
Hard Disk
Space to
Install
Parallel 1
(IEEE1284)
USB 2 10Base-T/
100Base-TX/
1000Base-T 3 4
(Ethernet)
Wireless 5
802.11b/g/n
Windows®
Operating
System
Windows® XP
Home
Windows® XP
Professional
Printing 32
bit
(x8
6)
or
64
bit
(x6
4)
pr
oc
es
sor
80 MB
Windows
Vista®
Windows® 7
Windows® 8
Windows® 8.1
349
Windows
Server® 2003
Printing 32
bit
(x8
6)
or
64
bit
(x6
4)
pr
oc
es
sor
Windows
Server® 2003
x64 Edition
Windows
Server® 2008
Windows
Server® 2008
R2
64
bit
(x6
4)
pr
oc
es
sor
Windows
Server® 2012
Windows
Server® 2012
R2
Macintosh
Operating
System
OS X v10.8.5 N/A Printing Int
el®
Pr
oc
es
sor
80 MB
OS X v10.9.x
OS X v10.10.x
1HL-L5000D
2Third party USB ports are not supported.
3HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT support 10Base-T/100Base-TX
4HL-L6250DN/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT support 10Base-T/100Base-TX/1000Base-T
5HL-L5200DW/HL-L5200DWT/HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
For the latest driver updates, go to your model's Downloads page on the Brother Solutions Center at
support.brother.com.
All trademarks, brand and product names are the property of their respective companies.
Related Information
•Appendix
350
Home > Appendix > How to Enter Text on Your Brother Machine
How to Enter Text on Your Brother Machine
>> HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
>> HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/HL-L5200DWT/HL-L6250DN
When setting certain options, such as the Network Key, you must enter characters on the machine:
• Hold down or repeatedly press a or b to select a character from this list:
0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ(space)!"#$%&'()*+,-./:;<=>?
@[]^_
• Press OK when the character or symbol you want is displayed, and then enter the next character.
• Press Back to delete characters entered incorrectly.
HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
When text is required, a keyboard appears on your machine's LCD.
• The characters may differ depending on your country.
• The keyboard layout may differ depending on the operation you perform.
• Press to cycle between letters, numbers and special characters.
• To move the cursor to the left or right, press d or c.
Inserting spaces
• To enter a space, press twice to choose special characters, then press the space button.
Making corrections
• If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect
character and press . Enter the correct character.
• To insert a character, press d or c to move the cursor to the correct place, and then enter the character.
• Press for each character you want to erase, or press and hold to erase all the characters.
Related Information
•Appendix
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID
•Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
•Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using a New SSID
351
Home > Appendix > Supplies
Supplies
When the time comes to replace supplies, such as the toner or drum, an error message will appear on your
machine's control panel or in the Status Monitor. For more information about the supplies for your machine, visit
http://www.brother.com/original/index.html or contact your local Brother dealer.
• The toner cartridge and drum unit are two separate parts.
• The toner cartridge number will vary depending on your country and region.
Supply Supply Model Name Approximate Life
(Page Yield)
Applicable Models
Toner Cartridge Standard Toner: TN-3430
(Israel) TN-3400
Approximately 3,000 pages
1 (A4 or Letter page)
HL-L5000D/HL-L5100DN/
HL-L5100DNT/
HL-L5200DW/
HL-L5200DWT/
HL-L6250DN/HL-L6300DW/
HL-L6300DWT/
HL-L6400DW/
HL-L6400DWT
High Yield Toner: TN-3480
(Israel) TN-3410
Approximately 8,000 pages
1 (A4 or Letter page)
HL-L5000D/HL-L5100DN/
HL-L5100DNT/
HL-L5200DW/
HL-L5200DWT/
HL-L6250DN/HL-L6300DW/
HL-L6300DWT/
HL-L6400DW/
HL-L6400DWT
Super High Yield Toner:
TN-3512
(Israel) TN-3500
Approximately 12,000
pages 1 (A4 or Letter page)
HL-L6250DN/HL-L6300DW/
HL-L6300DWT/
HL-L6400DW/
HL-L6400DWT
Ultra High Yield Toner:
TN-3520
(Israel) TN-3510
Approximately 20,000
pages 1 (A4 or Letter page)
HL-L6400DW/
HL-L6400DWT
Inbox Toner: supplied with
your machine
Approximately 2,000 pages
1 (A4 or Letter page)
HL-L5000D
Approximately 3,000 pages
1 (A4 or Letter page)
HL-L5100DN/
HL-L5100DNT/
HL-L5200DW/
HL-L5200DWT
Approximately 8,000 pages
1 (A4 or Letter page)
HL-L6300DW/
HL-L6300DWT
Approximately 12,000
pages 1 (A4 or Letter page)
HL-L6250DN/HL-L6400DW/
HL-L6400DWT
Drum Unit DR-3400
(Israel) DR-3420
Approximately 30,000
pages / 50,000 pages 2
HL-L5000D/HL-L5100DN/
HL-L5100DNT/
HL-L5200DW/
HL-L5200DWT/
HL-L6250DN/HL-L6300DW/
HL-L6300DWT/
1Approximate cartridge yield is declared in accordance with ISO/IEC 19752.
2Approximately 30,000 pages based on 1 page per job and 50,000 pages based on 3 pages per job [A4/letter simplex pages]. The number of
pages may be affected due to a variety of factors including but not limited to media type and media size.
353
Home > Appendix > Accessories
Accessories
Availability of accessories may vary depending on your country or region. For more information about the
accessories for your machine, visit http://www.brother.com/original/index.html or contact your Brother dealer or
Brother customer service.
Model Name Item Applicable Models
LT-5500 (Grey) Lower Tray (250 sheets) HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/
HL-L5200DWT/HL-L6250DN
LT-5505 (White) HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT
LT-6500 (Grey) Lower Tray (520 sheets) HL-L5000D/HL-L5100DN/HL-L5100DNT/HL-L5200DW/
HL-L5200DWT/HL-L6250DN
LT-6505 (White) HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT
MX-4000 Mailbox HL-L6300DW/HL-L6300DWT/HL-L6400DW/
HL-L6400DWT
PC-5000 Parallel I/F cable HL-L5000D
Related Information
•Appendix
•Mailbox Unit
355
Home > Appendix > Accessories > Mailbox Unit
Mailbox Unit
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The optional Mailbox (MX) unit gives you increased control over your Brother machine's print output. You can
assign the unit's four output bins to specific users, organize specific print jobs more efficiently, and extend the
machine's printout capacity.
Use the Mailbox unit as a:
• Mailbox: Assign each bin to a specific user or group, and send print jobs directly to each recipient's bin.
• Stacker: When printing large documents, use the bins to increase your machine's output tray capacity. When
the machine's output tray is full, the machine ejects the pages into the Mailbox bins.
To increase the machine's output capacity to a maximum of 1,050 sheets (including the standard output tray),
remove bins 2 and 4.
• Sorter: When printing multiple copies, set the printer driver to eject each copy into a different bin.
Set your preferences for Stacker (MX Stacker) and Sorter (MX Sorter) in your printer driver or on your Brother
machine’s LCD.
To set MX Stacker or MX Sorter in your printer driver (for Windows®)
In your printer driver, click the Advanced tab, click the Output Tray drop-down menu, and select either MX
Stacker or MX Sorter. Click OK.
To set MX Stacker or MX Sorter in your printer driver (for Macintosh)
In your printer driver, select Print Settings, click the Output Tray pop-up menu, and select either MX Stacker or
MX Sorter.
For more information on printer driver settings, see Related Information.
To set MX Stacker or MX Sorter from the machine's LCD
On the machine’s LCD, press [Settings] > [Paper Tray] > [Output Tray] > [MX Stacker] or
[MX Sorter].
Related Information
•Accessories
•Use Standard Tray When Full
•Mailbox Continue
•Assign a Mailbox Bin to a User or Group
356
Home > Appendix > Accessories > Mailbox Unit > Use Standard Tray When Full
Use Standard Tray When Full
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
The Use Std. Tray when full feature allows a large print job to continue printing, even if the Mailbox bins are full.
If you select this option in your printer driver, the machine continues the print job, ejecting the remaining pages
onto the machine's main output tray when the Mailbox bins are full.
For more information on the printer driver settings, see Related Information.
This setting's name is for Windows and may vary for Macintosh depending on your country.
Related Information
•Mailbox Unit
•Print Settings (Windows®)
•Print Options (Macintosh)
358
Home > Appendix > Accessories > Mailbox Unit > Mailbox Continue
Mailbox Continue
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
If a print job stopped because all the bins are full, the MX (Mailbox) Continue feature allows the machine to
resume the print job after you remove the printed pages from any of the printout locations.
Setting Description
On Your machine resumes the print job using the first empty
output tray or Mailbox bin.
Off You must remove the printed pages from the output tray
and all Mailbox bins to resume the print job.
By default, MX Continue is off. To turn on MX Continue:
Press [Settings] > [Paper Tray] > [MX Continue] > [On].
Related Information
•Mailbox Unit
•Settings Tables (1.8 inch Touchscreen models)
359
Home > Appendix > Accessories > Mailbox Unit > Assign a Mailbox Bin to a User or Group
Assign a Mailbox Bin to a User or Group
Related Models: HL-L6300DW/HL-L6300DWT/HL-L6400DW/HL-L6400DWT
To organize print jobs by sending them to a specific recipient, assign each Mailbox bin to an individual or to a
group.
• This feature is available only when Secure Function Lock 3.0 is on.
• Make sure you select Auto (default setting) from Output Tray in the printer driver when you send the
print job.
• This setting's name is for Windows and may vary for Macintosh depending on your country.
Anyone using your Brother machine can send a print job to a specific bin but the administrator must assign the
bins to users or groups first.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. Click the Administrator tab.
4. Click the User Restriction Function menu in the left navigation bar.
5. Select Secure Function Lock.
6. Click Submit.
7. Click the User List menu in the left navigation bar.
8. In the User List field, type the user name.
9. In the PIN Number field, type a four-digit password.
10. Click the Output drop-down list, and then select the output tray for each user.
11. Select User List / Restricted Functions from the drop-down list for each user.
12. Click Submit.
13. Click the Print tab.
14. Click the Tray menu in the left navigation bar.
15. Click the Output drop-down list, and then select SFL setting.
16. Click Submit.
Related Information
•Mailbox Unit
•Print Settings (Windows®)
•Print Options (Macintosh)
•Configure Secure Function Lock 3.0 Using Web Based Management
360
Home > Appendix > Information Regarding Recycled Paper
Information Regarding Recycled Paper
• Recycled paper is of the same quality as paper made from original forest sources. Standards governing
modern recycled paper ensure that it meets the highest quality requirements for different printing processes.
The imaging equipment supplied by the VA signatories is suitable for using with recycled paper meeting the
EN 12281:2002 standard.
• Purchasing recycled paper saves natural resources and promotes the circular economy. Paper is made using
cellulose fibres from wood. Collecting and recycling paper extends the life of fibres over multiple life cycles,
making the best use of the resources.
• The recycled paper production process is shorter. The fibres have already been processed, so less water and
energy, and fewer chemicals are used.
• Paper recycling has the benefit of saving carbon by diverting paper products from alternative disposal routes
such as landfill and incineration. Landfill waste emits methane gas, which has a powerful greenhouse effect.
Related Information
•Appendix
361
Glossary
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of these features
depends on the model you purchased.
A B C D E G H I L M N O P R S T V W
A
•Active Directory® Authentication
•Ad-Hoc Mode
•AES
•APIPA
•ARP
•Authentication
B
•BOOTP
•BRAdmin Light (Windows®)
•BRAdmin Professional 3 (Windows®)
•BRPrint Auditor (Windows®)
C
•CA
•CA Certificate
•Certificate
•Channels
•CIFS
•CSR
•Custom Raw Port
Home > Glossary
362
Active Directory® Authentication
Active Directory® Authentication restricts the use of the Brother machine. You cannot use your machine until you
log on to the machine using a user ID and password.
Ad-Hoc Mode
The mode of operation in a wireless network, in which all devices (machines and computers) are connected
without an access point/router.
AES
Advanced Encryption Standard (AES) is the Wi-Fi®-authorised strong encryption standard.
APIPA
If you do not assign an IP address manually or automatically (using a DHCP, BOOTP, or RARP server), the
Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range
169.254.1.0 to 169.254.254.255.
ARP
Address Resolution Protocol (ARP) performs mapping of an IP address to a MAC address in a TCP/IP network.
Authentication
Most wireless networks use some kind of security settings. These security settings define the authentication (how
the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network).
If you do not correctly specify these options when you are configuring your Brother wireless machine, it will not
be able to connect to the wireless network. Therefore, care must be taken when configuring these options.
Authentication Methods for a Personal Wireless Network
A personal wireless network is a small network (such as a home wireless network) without IEEE 802.1x
support.
• Open system
Wireless devices are allowed to access the network without any authentication.
• Shared key
A secret pre-determined key is shared by all devices that will access the wireless network. The Brother
wireless machine uses the WEP key as the pre-determined key.
• WPA-PSK/WPA2-PSK
Enables a Wi-Fi Protected Access® Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
Authentication Methods for an Enterprise Wireless Network
An enterprise wireless network is a large network, for example using your machine in a business enterprise
wireless network, with IEEE 802.1x support. If you configure your machine in an IEEE 802.1x supported
wireless network, you can use the following authentication methods.
• LEAP
• EAP-FAST
Home > Glossary
367
• PEAP
• EAP-TTLS
• EAP-TLS
The authentication methods above use the user ID less than 64 characters and a password of less than 32
characters in length.
BOOTP
The Bootstrap Protocol (BOOTP) is a network protocol used by a network client to obtain an IP Address from a
configuration server.
To use BOOTP, contact your network administrator.
BRAdmin Light (Windows®)
BRAdmin Light is a utility for the initial setup of Brother network-connected devices. This utility can search for
Brother products on your network, view the status and configure the basic network settings, such as IP address.
Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download
BRAdmin Light.
BRAdmin Professional 3 (Windows®)
BRAdmin Professional 3 is a utility for more advanced management of network-connected Brother devices. This
utility can search for Brother products on your network and view the device status from an easy-to-read
Windows® Explorer-style screen that changes colour to identify the status of each device. You can configure
network and device settings, and update device firmware from a Windows® computer on your LAN. BRAdmin
Professional 3 can also log activity of Brother devices on your network and export the log data in an HTML, CSV,
TXT, or SQL format. For users who want to monitor locally-connected machines, install the Print Auditor Client
software on the client computer. This utility allows you to use BRAdmin Professional 3 to monitor machines that
are connected to a client computer via the USB interface.
Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the
software.
• This utility is available only for Windows®.
• Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to
download the latest version of Brother's BRAdmin Professional 3 utility.
• Node name: The node name appears in the current BRAdmin Professional 3 window. The default node
name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where
"xxxxxxxxxxxx" is your machine's MAC Address / Ethernet address).
• If you are using Windows® Firewall, or the firewall function of an anti-spyware or antivirus application,
temporarily disable them. When you are sure you can print, configure the software settings following the
instructions.
BRPrint Auditor (Windows®)
Brother's BRPrint Auditor software brings the monitoring power of Brother network management tools to locally-
connected machines. This utility allows a client computer to collect usage and status information from your
Home > Glossary
368
Brother machine connected via the parallel or USB interface. The BRPrint Auditor can then pass this information
to another computer running BRAdmin Professional 3 on the network. This allows the administrator to check
items, such as page counts, toner and drum status, and the firmware version. In addition to reporting to Brother
network management applications, this utility can email the usage and status information directly to a predefined
email address in a CSV or XML file format (SMTP Mail support required). The BRPrint Auditor utility also
supports email notification for reporting warning and error conditions.
CA
A Certificate Authority (CA) is an entity that issues digital certificates (especially X.509 certificates) and vouches
for the binding between the data items in a certificate.
CA Certificate
A CA Certificate is the certification that identifies the CA itself and owns its private key. A CA Certificate verifies a
certificate issued by the CA.
Certificate
A Certificate is the information that binds together a public key with an identity. The certificate can be used to
verify that a public key belongs to an individual. The format is defined by the X.509 standard.
Channels
Wireless networks use channels. Each wireless channel is on a different frequency. There are up to 14 different
channels that can be used when using a wireless network. However, in many countries the number of channels
available is restricted.
CIFS
The Common Internet File System (CIFS) is the standard way that computer users share files and printers in
Windows®.
CSR
A Certificate Signing Request (CSR) is a message sent from an applicant to a Certificate Authority (CA) to apply
for issue of a certificate. The CSR contains information identifying the applicant, the public key generated by the
applicant and the digital signature of the applicant.
Custom Raw Port
Custom raw port is a commonly used printing protocol on a TCP/IP network that enables interactive data
transmission. Default is Port 9100.
Density
Changing the Density makes the whole image lighter or darker.
Home > Glossary
369
DHCP
The Dynamic Host Configuration Protocol (DHCP) is a network protocol that is used to configure network devices
so that they can communicate on an IP Network.
To use DHCP, contact your network administrator.
DNS Client
The Brother print server supports the Domain Name System (DNS) client feature. This feature allows the print
server to communicate with other devices using its DNS name.
DNS Server
The Domain Name System (DNS) is a technology to manage the names of web sites and internet domains. A
DNS server allows your computer to find its IP address automatically.
Driver Deployment Wizard
Brother's Installation CD-ROM includes the Windows® printer driver and Brother network port driver (LPR and
NetBIOS). If an administrator installs the printer driver and port driver using this application, the administrator can
save the file to the file server or send the file by email to users. Then, each user just clicks that file to have the
printer driver, port driver, IP address, etc. automatically copied to their computer.
Encryption
Most wireless networks use some kind of security settings. These security settings define the authentication (how
the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the network).
If you do not correctly specify these options when you are configuring your Brother wireless machine, it will not
be able to connect to the wireless network. Therefore, care must be taken when configuring these options.
Encryption Methods for a Personal Wireless Network
A personal wireless network is a small network (such as a home wireless network) without IEEE 802.1x
support.
• None
No encryption method is used.
• WEP
When using Wired Equivalent Privacy (WEP) the data is transmitted and received with a secured key.
• TKIP
Temporal Key Integrity Protocol (TKIP) provides per-packet key mixing a message integrity check and
rekeying mechanism.
• AES
Advanced Encryption Standard (AES) provides stronger data protection using a symmetric-key encryption.
• IEEE 802.11n does not support either WEP or TKIP as an encryption method.
• To connect to your wireless network using IEEE 802.11n, we recommend selecting AES.
Home > Glossary
370
Encryption Methods for an Enterprise Wireless Network
An enterprise wireless network is a large network, for example using your machine in a business enterprise
wireless network, with IEEE 802.1x support. If you configure your machine in an IEEE 802.1x supported
wireless network, you can use the following encryption methods.
• TKIP
• AES
• CKIP
The original key Integrity Protocol for LEAP by Cisco Systems, Inc.
Gateway
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located on an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know the
Gateway IP address, then contact your Network Administrator.
HTTP (Web Server)
Hypertext Transfer Protocol (HTTP) is used to transmit the data between a web server and a web browser. The
Brother print server is equipped with a built-in web server that allows you to monitor its status or change some of
its configuration settings using a web browser.
HTTPS
HTTPS (HTTP over SSL/TLS) is the version of the Hypertext Transfer Protocol (HTTP) that uses SSL/TLS so
that web content is transferred and displayed securely.
IEEE 802.1x
IEEE 802.1x is a networking authentication standard used to connect to a wired or wireless LAN. It restricts
connections which are not authentic and only users authenticated by a central authority are allowed to be
connected.
Infrastructure Mode
The mode of operation in a wireless network, in which all devices (machines and computers) are connected via
an access point/router.
IP Address
An Internet Protocol (IP) address is a series of numbers that identifies each device connected to a network. An
IP address consists of four numbers separated by dots. Each number is between 0 and 255.
Example: In a small network, you would normally change the final number.
192.168.1.1
192.168.1.2
192.168.1.3
How the IP address is assigned to your print server:
Home > Glossary
371
If you have a DHCP/BOOTP/RARP server in your network, the print server will automatically obtain its IP
address from that server.
On smaller networks, the DHCP server may also be the Router.
If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will
automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
IPP
The Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible machine
via the Internet.
IPPS
IPPS (Internet Printing Protocol) is the printing protocol that uses SSL. IPPS is used to send and receive printing
data and manage printing devices.
IPsec
IPsec is an optional security feature of the IP protocol that provides authentication and encryption services.
IPv6
IPv6 is the next generation Internet protocol. For more information on the IPv6 protocol, go to your model's page
on the Brother Solutions Center at support.brother.com.
LEAP
Lightweight Extensible Authentication Protocol (LEAP) is a proprietary EAP method developed by Cisco
Systems, Inc. that uses a user ID and password for authentication. LEAP is used in wireless networks.
LLMNR
The Link-Local Multicast Name Resolution (LLMNR) protocol resolves the names of neighboring computers, if
the network does not have a Domain Name System (DNS) server. The LLMNR Responder feature works in both
the IPv4 or IPv6 environment when using Windows Vista® or greater.
LPD
Line Printer Daemon (LPD or LPR) protocol is a commonly-used printing protocol on a TCP/IP network, mainly
for UNIX®-based operating systems.
LPR
Line Printer Daemon (LPR or LPD) protocol is a commonly-used printing protocol on a TCP/IP network.
Home > Glossary
372
MAC Address
The MAC Address (Ethernet Address) is a unique number assigned for the machine's network interface.
mDNS
Multicase DNS (mDNS) allows the Brother print server to configure itself to work in an OS X Simple Network
Configuration system automatically.
NetBIOS Name Resolution
Network Basic Input/Output System (NetBIOS) name resolution enables you to obtain the IP address of the other
device using its NetBIOS name during the network connection.
Network Configuration Report
The Network Configuration Report prints a report listing the current network configuration, including the network
print server settings.
Network Connection Repair Tool
The Network Connection Repair Tool is a program Brother provides to correct the driver's settings so that they
match the machine's network settings. To use the Network Connection Repair Tool, ask your network
administrator.
Network Key
The Network Key is a password, which is used when the data is encrypted or decrypted. The Network Key is also
described as the Password, Security Key, or Encryption Key. The table shows the number of characters of the
key to use for each setting.
Open system/Shared key with WEP
This key is a 64-bit or a 128-bit value that must be entered in an ASCII or hexadecimal format.
ASCII Hexadecimal
64 (40) bit Uses five text characters.
For example, "WSLAN" (case-sensitive).
Uses 10 digits of hexadecimal data.
For example, "71f2234aba" (not case-
sensitive).
128 (104) bit Uses 13 text characters.
For example, "Wirelesscomms" (case-
sensitive).
Uses 26 digits of hexadecimal data.
For example,
"71f2234ab56cd709e5412aa2ba" (not case-
sensitive).
WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is eight or more characters in length, up to a maximum of 63 characters.
Network Shared Printing
Network Shared Printing is a type of printing in a network shared environment. In a network shared environment,
each computer sends data via a server or print server.
Home > Glossary
373
Node Name
The Node Name is a machine name on the network. This name is often referred to as a NetBIOS name; it will be
the name that is registered by the WINS server on your network. Brother recommends the name
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is
your machine's MAC address / ethernet address.)
Open System
Open System is one of the network authentication methods. Under open system authentication, any wireless
devices are allowed to access the network without requiring a WEP key.
PEAP
Protected Extensible Authentication Protocol (PEAP) is a version of EAP method developed by Cisco Systems,
Inc., Microsoft® Corporation and RSA Security. PEAP creates an encrypted Secure Sockets Layer (SSL)/
Transport Layer Security (TLS) tunnel between a client and an authentication server, for sending a user ID and
password. PEAP provides mutual authentication between the server and the client.
The Brother machine supports the following inner authentications:
• PEAP/MS-CHAPv2
• PEAP/GTC
Peer-to-Peer
Peer-to-Peer is a type of printing in a peer-to-peer environment. In a peer-to-peer environment, each computer
sends and receives data directly to and from each device. There is no central server controlling access or
machine sharing.
Protocols
Protocols are the standardised sets of rules for transmitting data on a network. Protocols allow users to gain
access to network-connected resources. The print server used on your Brother machine supports the
Transmission Control Protocol/Internet Protocol (TCP/IP) protocol.
Public Key Cryptosystem
A Public Key Cryptosystem is a modern branch of cryptography in which the algorithms employ a pair of keys (a
public key and a private key) and use a different component of the pair for different steps of the algorithm.
RARP
Reverse Address Resolution Protocol (RARP) finds the logical address for a machine that knows only its physical
address.
To use RARP, contact your network administrator.
Resolution
The number of vertical and horizontal lines per inch.
Home > Glossary
374
Secure Function Lock 3.0
Secure Function Lock 3.0 increases security by restricting the use of functions.
Settings Tables
At-a-glance instructions that show all the settings and options that are available for setting up your machine.
Shared Key Cryptosystem
A Shared Key Cryptosystem is a branch of cryptography involving algorithms that use the same key for two
different steps of the algorithm (such as encryption and decryption).
SMTP Client
Simple Mail Transfer Protocol (SMTP) client is used to send emails via the Internet or Intranet.
SMTP over SSL
SMTP over SSL feature enables sending encrypted email using SSL.
SMTP-AUTH
SMTP Authentication (SMTP-AUTH) expands SMTP (the Internet email sending protocol) to include an
authentication method that ensures the true identity of the sender is known.
SNMP
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network-ready machines. The Brother print server supports SNMPv1, SNMPv2c and
SNMPv3.
SNMPv3
Simple Network Management Protocol version 3 (SNMPv3) provides user authentication and data encryption to
manage network devices securely.
SNTP
The Simple Network Time Protocol (SNTP) is used to synchronize computer clocks on a TCP/IP network. You
can configure the SNTP settings using Web Based Management.
SSID
Each wireless network has its own unique network name and it is technically referred to as a Service Set
Identifier (SSID). The SSID is a 32-byte or less value and is assigned to the access point. The wireless network
devices you want to associate to the wireless network should match the access point. The access point and
wireless network devices regularly send wireless packets (referred to as beacons), which contain the SSID
Home > Glossary
375
information. When your wireless network device receives a beacon, you can identify the wireless network that is
close enough for the radio waves to reach your device.
SSL/TLS
Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data that is
sent over a local or wide area network. SSL/TLS works by encrypting data, such as a print job, sent over a
network, so anyone trying to capture it will not be able to read it .
SSL/TLS can be configured on both wired and wireless networks and will work with other forms of security
including WPA keys and firewalls.
Status Monitor
The Status Monitor utility is a configurable utility to monitor the status of one or more devices, allowing you to get
immediate notification when there is a problem, for example, when the machine runs out of paper or jams.
Store Print Log to Network
The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a
network server using CIFS.
Subnet Mask
A subnet mask allows you to identify which part of an IP address is used as the network address and which part
is used as the host address.
In the following example, the last segment of the IP address is known as the host address and the first three
segments are the network address.
Example: Computer 1 can talk to Computer 2
• Computer 1
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
• Computer 2
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
0 denotes that there is no limit to communication at this part of the address.
TCP/IP
Transmission Control Protocol/Internet Protocol (TCP/IP) is the most popular set of protocols used for
communication, such as Internet and email. This protocol can be used in almost all operating systems, including
Windows®, Windows Server®, OS X and Linux®.
TELNET
The TELNET protocol allows you to control the remote network devices on a TCP/IP network from your
computer.
Home > Glossary
376
TKIP
Temporal Key Integrity Protocol (TKIP) is one of the encryption methods adopted by WPA™ to be used in a
wireless network. TKIP provides per-packet key mixing, a message integrity check and rekeying mechanism.
Vertical Pairing
Vertical Pairing is a technology for Windows® that allows your Vertical Pairing-supported wireless machine to
connect to your Infrastructure network using the PIN Method of Wi-Fi Protected Setup™ and the Web Services
feature. It also enables printer driver installation from the printer icon in the Add a device screen.
Web Based Management
A standard Web Browser can be used to manage your machine using the Hyper Text Transfer Protocol (HTTP)
or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). You can perform the function listed or get
the following information from a machine on your network using a web browser:
• Machine status information
• Change network settings, such as TCP/IP information
• Configure Gigabit Ethernet
• Configure Secure Function Lock 3.0
• Configure Store Print Log to Network
• Configure LDAP
• Software version information of the machine and print server
• Change network and machine configuration details
To use Web Based Management, you must use the TCP/IP protocol on your network and have a valid IP
address programmed into the print server and your computer.
Web Services
The Web Services protocol enables Windows Vista®, Windows® 7, or Windows® 8 users to install the drivers
used for printing by right-clicking on the machine icon in the Network folder. Web Services also lets you check
the current status of the machine from your computer.
WEP
Wired Equivalent Privacy (WEP) is one of the encryption methods used in a wireless network. When using WEP,
the data is transmitted and received with a secure key.
Wi-Fi Direct®
Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance®. This type of
connection is a Wi-Fi standard that allows devices to connect with each other without a wireless access point,
using secured method.
Home > Glossary
377
WINS
Windows® Internet Name Service (WINS) is an information-providing service for NetBIOS name resolution. It
consolidates an IP address and a NetBIOS name that is in the local network.
WINS Server
Windows® Internet Name Service (WINS) Server maps IP addresses to computer names (NetBIOS names) in a
Windows® network.
WLAN Report
The WLAN Report prints your machine’s wireless status report. If the wireless connection fails, check the error
code on the printed report.
WPA-PSK/WPA2-PSK Authentication Method
WPA-PSK/WPA2-PSK authentication method enables a Wi-Fi Protected Access® Pre-shared key (WPA-PSK/
WPA2-PSK), which enables the Brother wireless machine to associate with access points using TKIP for WPA-
PSK or AES for WPA-PSK and WPA2-PSK (WPA-Personal).
WPS
Wi-Fi Protected Setup™ (WPS) is a standard that allows the setup of secured wireless networks. WPS was
created by the Wi-Fi Alliance® in 2007.
Home > Glossary
378
